Skip to content

Set boot tags for the usb0 port of AM62x SK and Beagleplay

Sjoerd Simons linux-arm-kernel linux-devicetree lkml 1 version Applied

Status from this message: I have applied the following to branch ti-k3-dts-next on [1].

Get series with b4
b4 am [email protected]

Versions newest first

  1. v1 Latest2 patches 1 replyApplied

Patches in v1 Applied

#Subject and filesSizeRepliesApplied
1/2arm64: dts: ti: k3-am625-sk: Add boot phase tags for USB0arch/arm64/boot/dts/ti/k3-am62x-sk-common.dtsi+2 -00 replies
2/2arm64: dts: ti: k3-am625-beagleplay: Add boot phase tags for USB0arch/arm64/boot/dts/ti/k3-am625-beagleplay.dts+2 -00 replies

Reviews trailers per patch

No Reviewed-by, Acked-by or Tested-by trailers for v1 yet.

Read the v1 thread

Cover letter [PATCH 0/2] Set boot tags for the usb0 port of AM62x SK and Beagleplay

The AM62x SoC can be booted from the first USB port using DFU. Set the relevant boot tags for both

Sjoerd Simons (2):
arm64: dts: ti: k3-am625-sk: Add boot phase tags for USB0
arm64: dts: ti: k3-am625-beagleplay: Add boot phase tags for USB0

 arch/arm64/boot/dts/ti/k3-am625-beagleplay.dts | 2 ++
 arch/arm64/boot/dts/ti/k3-am62x-sk-common.dtsi | 2 ++
 2 files changed, 4 insertions(+)
Signature · 1 line
2.43.0