Skip to contentSkip to conversation

i3c: document hotjoin sysfs entry

PATCH New [email protected] 1 participant 1 message Jan 14, 2024 I3C

lore
Share & tools
lore

[email protected]

author maintainer
#0 lore raw

PATCH 1/1 i3c: document hotjoin sysfs entry

From: Alexandre Belloni <[email protected]>

The hotjoin syfs entry allows to enable or disable Hot-Join on the Current Controller of the I3C Bus.

---
 Documentation/ABI/testing/sysfs-bus-i3c | 15 +++++++++++++++
 1 file changed, 15 insertions(+)
Documentation/ABI/testing/sysfs-bus-i3c +15 -0
index e5248fd67a56..c812ab180ff4 100644
@@ -88,6 +88,21 @@ Description:
 		This entry describes the HDRCAP of the master controller
 		driving the bus.
 
+What:		/sys/bus/i3c/devices/i3c-<bus-id>/hotjoin
+KernelVersion:  6.8
+Contact:	[email protected]
+Description:
+		I3C’s Hot-Join mechanism allows an I3C Device to inform the
+		Active Controller that a newly-joined Target is present on the
+		I3C Bus and is ready to receive a Dynamic Address, in order to
+		become fully functional on the Bus. Hot-Join is used when the
+		Target is mounted on the same I3C bus and remains depowered
+		until needed or until the Target is physically inserted into the
+		I3C bus
+
+		This entry allows to enable or disable Hot-join of the Current
+		Controller driving the bus.
+
 What:		/sys/bus/i3c/devices/i3c-<bus-id>/<bus-id>-<device-pid>
 KernelVersion:  5.0
 Contact:	[email protected]
Signature · 1 line
2.43.0