i3c: document hotjoin sysfs entry
[email protected]
maintainerPATCH 1/1 i3c: document hotjoin sysfs entry
From: Alexandre Belloni <[email protected]>
The hotjoin syfs entry allows to enable or disable Hot-Join on the Current Controller of the I3C Bus.
Signed-off-by Alexandre Belloni <[email protected]>
--- Documentation/ABI/testing/sysfs-bus-i3c | 15 +++++++++++++++ 1 file changed, 15 insertions(+)
Documentation/ABI/testing/sysfs-bus-i3c +15 -0
@@ -88,6 +88,21 @@ Description: This entry describes the HDRCAP of the master controller driving the bus. +What: /sys/bus/i3c/devices/i3c-<bus-id>/hotjoin +KernelVersion: 6.8 +Contact: [email protected] +Description: + I3C’s Hot-Join mechanism allows an I3C Device to inform the + Active Controller that a newly-joined Target is present on the + I3C Bus and is ready to receive a Dynamic Address, in order to + become fully functional on the Bus. Hot-Join is used when the + Target is mounted on the same I3C bus and remains depowered + until needed or until the Target is physically inserted into the + I3C bus + + This entry allows to enable or disable Hot-join of the Current + Controller driving the bus. + What: /sys/bus/i3c/devices/i3c-<bus-id>/<bus-id>-<device-pid> KernelVersion: 5.0 Contact: [email protected]
Signature · 1 line
2.43.0