Skip to contentSkip to conversation

uboot-sign: add variables to set load address and entrypoint

PATCH Superseded Jamin Lin 1 participant 1 message Jan 15, 2024

v1 of 2 Superseded Latest is v2 →

lore
Share & tools
lore

Jamin Lin

author
#0 lore raw

PATCH 1/1 uboot-sign: add variables to set load address and entrypoint

According to the design of uboot-sign.bbclass and kernel-fitimage.bbclass, both of them use an UBOOT_LOADADDRESS variable to set the load address of kernel and u-boot image and use an UBOOT_ENTRYPOINT to set the entry address of kernel and u-boot image.

However, users may set the different load address of u-boot and kernel image. Therefore, adds UBOOT_FIT_UBOOT_LOADADDRESS and UBOOT_FIT_UBOOT_ENTRYPOINT to set the
load address and entry point of u-boot image, respectively.

The value of UBOOT_FIT_UBOOT_ENTRYPOINT is UBOOT_LOADADDRESS by default. The value of UBOOT_FIT_UBOOT_ENTRYPOINT is UBOOT_ENTRYPOINT by default.

---
 meta/classes-recipe/uboot-sign.bbclass | 7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)
meta/classes-recipe/uboot-sign.bbclass +5 -2
index ad04c82378..abde0bc61c 100644
@@ -88,6 +88,9 @@ UBOOT_FIT_ADDRESS_CELLS ?= "1"
 # This is only necessary for determining the signing configuration
 KERNEL_PN = "${PREFERRED_PROVIDER_virtual/kernel}"
 
+UBOOT_FIT_UBOOT_LOADADDRESS ?= "${UBOOT_LOADADDRESS}"
+UBOOT_FIT_UBOOT_ENTRYPOINT ?= "${UBOOT_ENTRYPOINT}"
+
 python() {
     # We need u-boot-tools-native if we're creating a U-Boot fitImage
     sign = d.getVar('UBOOT_SIGN_ENABLE') == '1'
@@ -248,8 +251,8 @@ uboot_fitimage_assemble() {
             os = "u-boot";
             arch = "${UBOOT_ARCH}";
             compression = "none";
-            load = <${UBOOT_LOADADDRESS}>;
-            entry = <${UBOOT_ENTRYPOINT}>;
+            load = <${UBOOT_FIT_UBOOT_LOADADDRESS}>;
+            entry = <${UBOOT_FIT_UBOOT_ENTRYPOINT}>;
 EOF
 
 	if [ "${SPL_SIGN_ENABLE}" = "1" ] ; then
Signature · 1 line
2.25.1