ARM: dts: imx6dl: Add support for Sielaff i.MX6 Solo board
Subsystems (4)
v2 cover ARM: dts: imx6dl: Add support for Sielaff i.MX6 Solo board
From: Frieder Schrempf <[email protected]>
This series adds upstream support for the Sielaff i.MX6 Solo board. It is used as controller and user interface in vending machines. It is based on the i.MX6 Solo SoC and features the following peripherals and interfaces:
* 512 MB DDR3 RAM
* 512 MB NAND Flash
* 1 MB NOR Flash
* SD card
* Debug LED
* Debug UART
* Key Inputs
* RTC
* RS232
* 100 MBit Ethernet
* USB Hub
* USB OTG
* HDMI
* 7" LVDS IPS panel
* PWM Backlight
* Optional Extension Board with USB Ethernet NIC
Patch 1 adds the vendor prefix, patch 2 adds the DT bindings and patch 3 adds the DT.
Changes in v2:
* Add Acked-by from Conor (Thanks!)
* Fix touchscreen node names (Thanks Fabio!)
Frieder Schrempf (3):
dt-bindings: vendor-prefixes: Add Sielaff
dt-bindings: arm: fsl: Add Sielaff i.MX6 Solo board
ARM: dts: imx6dl: Add support for Sielaff i.MX6 Solo board
.../devicetree/bindings/arm/fsl.yaml | 1 + .../devicetree/bindings/vendor-prefixes.yaml | 2 + arch/arm/boot/dts/nxp/imx/Makefile | 1 + arch/arm/boot/dts/nxp/imx/imx6dl-sielaff.dts | 533 ++++++++++++++++++ 4 files changed, 537 insertions(+) create mode 100644 arch/arm/boot/dts/nxp/imx/imx6dl-sielaff.dts
Signature · 1 line
2.43.0
PATCH v2 1/3 dt-bindings: vendor-prefixes: Add Sielaff
From: Frieder Schrempf <[email protected]>
Add "Sielaff GmbH & Co. KG Automatenbau Herrieden" (https://sielaff.de).
---
Changes in v2:
* Add Acked-by from Conor (Thanks!)
--- Documentation/devicetree/bindings/vendor-prefixes.yaml | 2 ++ 1 file changed, 2 insertions(+)
Documentation/devicetree/bindings/vendor-prefixes.yaml +2 -0
@@ -1233,6 +1233,8 @@ patternProperties: description: Si-En Technology Ltd. "^si-linux,.*": description: Silicon Linux Corporation + "^sielaff,.*": + description: Sielaff GmbH & Co. KG Automatenbau Herrieden "^siemens,.*": description: Siemens AG "^sifive,.*":
Signature · 1 line
2.43.0
PATCH v2 2/3 dt-bindings: arm: fsl: Add Sielaff i.MX6 Solo board
In reply to Frieder SchrempfFrom: Frieder Schrempf <[email protected]>
Add compatible for the Sielaff i.MX6 Solo board.
---
Changes in v2:
* Add Acked-by from Conor (Thanks!)
--- Documentation/devicetree/bindings/arm/fsl.yaml | 1 + 1 file changed, 1 insertion(+)
Documentation/devicetree/bindings/arm/fsl.yaml +1 -0
@@ -469,6 +469,7 @@ properties: - prt,prtvt7 # Protonic VT7 board - rex,imx6dl-rex-basic # Rex Basic i.MX6 Dual Lite Board - riot,imx6s-riotboard # RIoTboard i.MX6S + - sielaff,imx6dl-board # Sielaff i.MX6 Solo Board - skov,imx6dl-skov-revc-lt2 # SKOV IMX6 CPU SoloCore lt2 - skov,imx6dl-skov-revc-lt6 # SKOV IMX6 CPU SoloCore lt6 - solidrun,cubox-i/dl # SolidRun Cubox-i Solo/DualLite
Signature · 1 line
2.43.0
PATCH v2 3/3 ARM: dts: imx6dl: Add support for Sielaff i.MX6 Solo board
In reply to Frieder SchrempfFrom: Frieder Schrempf <[email protected]>
The Sielaff i.MX6 Solo board is used as controller and user interface in vending machines. It is based on the i.MX6 Solo SoC and features the following peripherals and interfaces:
* 512 MB DDR3 RAM
* 512 MB NAND Flash
* 1 MB NOR Flash
* SD card
* Debug LED
* Debug UART
* Key Inputs
* RTC
* RS232
* 100 MBit Ethernet
* USB Hub
* USB OTG
* HDMI
* 7" LVDS IPS panel
* PWM Backlight
* Optional Extension Board with USB Ethernet NIC
---
Changes in v2:
* Fix touchscreen node names (Thanks Fabio!)
--- arch/arm/boot/dts/nxp/imx/Makefile | 1 + arch/arm/boot/dts/nxp/imx/imx6dl-sielaff.dts | 533 +++++++++++++++++++ 2 files changed, 534 insertions(+) create mode 100644 arch/arm/boot/dts/nxp/imx/imx6dl-sielaff.dts
arch/arm/boot/dts/nxp/imx/Makefile +1 -0
@@ -118,6 +118,7 @@ dtb-$(CONFIG_SOC_IMX6Q) += \ imx6dl-sabrelite.dtb \ imx6dl-sabresd.dtb \ imx6dl-savageboard.dtb \ + imx6dl-sielaff.dtb \ imx6dl-skov-revc-lt2.dtb \ imx6dl-skov-revc-lt6.dtb \ imx6dl-solidsense.dtb \
arch/arm/boot/dts/nxp/imx/imx6dl-sielaff.dts new file +533 -0
533 lines not on this page · raw message
Signature · 1 line
2.43.0
Shawn Guo
AppliedQuoted 31 lines · Frieder Schrempf
From: Frieder Schrempf <[email protected]>
This series adds upstream support for the Sielaff i.MX6 Solo board. It is used as controller and user interface in vending machines. It is based on the i.MX6 Solo SoC and features the following peripherals and interfaces:
* 512 MB DDR3 RAM
* 512 MB NAND Flash
* 1 MB NOR Flash
* SD card
* Debug LED
* Debug UART
* Key Inputs
* RTC
* RS232
* 100 MBit Ethernet
* USB Hub
* USB OTG
* HDMI
* 7" LVDS IPS panel
* PWM Backlight
* Optional Extension Board with USB Ethernet NICPatch 1 adds the vendor prefix, patch 2 adds the DT bindings and patch 3 adds the DT.
Changes in v2:
* Add Acked-by from Conor (Thanks!)
* Fix touchscreen node names (Thanks Fabio!)
Quoted 5 lines
Frieder Schrempf (3):
dt-bindings: vendor-prefixes: Add Sielaffdt-bindings: arm: fsl: Add Sielaff i.MX6 Solo board
ARM: dts: imx6dl: Add support for Sielaff i.MX6 Solo board
Applied both, thanks!