Skip to contentSkip to conversation

ARM: dts: imx6dl: Add support for Sielaff i.MX6 Solo board

PATCH Applied Frieder Schrempf 2 participants 5 messages Jan 16, 2024 – Feb 5, 2024

Subsystems (4)
lore
Share & tools
lore
#0 lore raw

v2 cover ARM: dts: imx6dl: Add support for Sielaff i.MX6 Solo board

From: Frieder Schrempf <[email protected]>

This series adds upstream support for the Sielaff i.MX6 Solo board. It is used as controller and user interface in vending machines. It is based on the i.MX6 Solo SoC and features the following peripherals and interfaces:

* 512 MB DDR3 RAM
* 512 MB NAND Flash
* 1 MB NOR Flash
* SD card
* Debug LED
* Debug UART
* Key Inputs
* RTC
* RS232
* 100 MBit Ethernet
* USB Hub
* USB OTG
* HDMI
* 7" LVDS IPS panel
* PWM Backlight
* Optional Extension Board with USB Ethernet NIC

Patch 1 adds the vendor prefix, patch 2 adds the DT bindings and patch 3 adds the DT.

Changes in v2:
* Add Acked-by from Conor (Thanks!)
* Fix touchscreen node names (Thanks Fabio!)

Frieder Schrempf (3):
dt-bindings: vendor-prefixes: Add Sielaff
dt-bindings: arm: fsl: Add Sielaff i.MX6 Solo board
ARM: dts: imx6dl: Add support for Sielaff i.MX6 Solo board

 .../devicetree/bindings/arm/fsl.yaml          |   1 +
 .../devicetree/bindings/vendor-prefixes.yaml  |   2 +
 arch/arm/boot/dts/nxp/imx/Makefile            |   1 +
 arch/arm/boot/dts/nxp/imx/imx6dl-sielaff.dts  | 533 ++++++++++++++++++
 4 files changed, 537 insertions(+)
 create mode 100644 arch/arm/boot/dts/nxp/imx/imx6dl-sielaff.dts
Signature · 1 line
2.43.0
#1 lore raw

PATCH v2 1/3 dt-bindings: vendor-prefixes: Add Sielaff

From: Frieder Schrempf <[email protected]>

Add "Sielaff GmbH & Co. KG Automatenbau Herrieden" (https://sielaff.de).

---
Changes in v2:
* Add Acked-by from Conor (Thanks!)

---
 Documentation/devicetree/bindings/vendor-prefixes.yaml | 2 ++
 1 file changed, 2 insertions(+)
Documentation/devicetree/bindings/vendor-prefixes.yaml +2 -0
index 309b94c328c84..8825a9f60ac5a 100644
@@ -1233,6 +1233,8 @@ patternProperties:
     description: Si-En Technology Ltd.
   "^si-linux,.*":
     description: Silicon Linux Corporation
+  "^sielaff,.*":
+    description: Sielaff GmbH & Co. KG Automatenbau Herrieden
   "^siemens,.*":
     description: Siemens AG
   "^sifive,.*":
Signature · 1 line
2.43.0
#2 lore raw

PATCH v2 2/3 dt-bindings: arm: fsl: Add Sielaff i.MX6 Solo board

In reply to Frieder Schrempf

From: Frieder Schrempf <[email protected]>

Add compatible for the Sielaff i.MX6 Solo board.

---
Changes in v2:
* Add Acked-by from Conor (Thanks!)

---
 Documentation/devicetree/bindings/arm/fsl.yaml | 1 +
 1 file changed, 1 insertion(+)
Documentation/devicetree/bindings/arm/fsl.yaml +1 -0
index 32b195852a75c..f6cdf4a8e51a2 100644
@@ -469,6 +469,7 @@ properties:
               - prt,prtvt7                # Protonic VT7 board
               - rex,imx6dl-rex-basic      # Rex Basic i.MX6 Dual Lite Board
               - riot,imx6s-riotboard      # RIoTboard i.MX6S
+              - sielaff,imx6dl-board      # Sielaff i.MX6 Solo Board
               - skov,imx6dl-skov-revc-lt2 # SKOV IMX6 CPU SoloCore lt2
               - skov,imx6dl-skov-revc-lt6 # SKOV IMX6 CPU SoloCore lt6
               - solidrun,cubox-i/dl            # SolidRun Cubox-i Solo/DualLite
Signature · 1 line
2.43.0
#3 lore raw

PATCH v2 3/3 ARM: dts: imx6dl: Add support for Sielaff i.MX6 Solo board

In reply to Frieder Schrempf

From: Frieder Schrempf <[email protected]>

The Sielaff i.MX6 Solo board is used as controller and user interface in vending machines. It is based on the i.MX6 Solo SoC and features the following peripherals and interfaces:

* 512 MB DDR3 RAM
* 512 MB NAND Flash
* 1 MB NOR Flash
* SD card
* Debug LED
* Debug UART
* Key Inputs
* RTC
* RS232
* 100 MBit Ethernet
* USB Hub
* USB OTG
* HDMI
* 7" LVDS IPS panel
* PWM Backlight
* Optional Extension Board with USB Ethernet NIC

---
Changes in v2:
* Fix touchscreen node names (Thanks Fabio!)

---
 arch/arm/boot/dts/nxp/imx/Makefile           |   1 +
 arch/arm/boot/dts/nxp/imx/imx6dl-sielaff.dts | 533 +++++++++++++++++++
 2 files changed, 534 insertions(+)
 create mode 100644 arch/arm/boot/dts/nxp/imx/imx6dl-sielaff.dts
arch/arm/boot/dts/nxp/imx/Makefile +1 -0
index a724d1a7a9a07..c32e004e7610c 100644
@@ -118,6 +118,7 @@ dtb-$(CONFIG_SOC_IMX6Q) += \
 	imx6dl-sabrelite.dtb \
 	imx6dl-sabresd.dtb \
 	imx6dl-savageboard.dtb \
+	imx6dl-sielaff.dtb \
 	imx6dl-skov-revc-lt2.dtb \
 	imx6dl-skov-revc-lt6.dtb \
 	imx6dl-solidsense.dtb \
arch/arm/boot/dts/nxp/imx/imx6dl-sielaff.dts new file +533 -0

533 lines not on this page · raw message

Signature · 1 line
2.43.0
Applied
#4 lore raw
In reply to Frieder Schrempf
Quoted 31 lines · Frieder Schrempf

From: Frieder Schrempf <[email protected]>

This series adds upstream support for the Sielaff i.MX6 Solo board. It is used as controller and user interface in vending machines. It is based on the i.MX6 Solo SoC and features the following peripherals and interfaces:

* 512 MB DDR3 RAM
* 512 MB NAND Flash
* 1 MB NOR Flash
* SD card
* Debug LED
* Debug UART
* Key Inputs
* RTC
* RS232
* 100 MBit Ethernet
* USB Hub
* USB OTG
* HDMI
* 7" LVDS IPS panel
* PWM Backlight
* Optional Extension Board with USB Ethernet NIC

Patch 1 adds the vendor prefix, patch 2 adds the DT bindings and patch 3 adds the DT.

Changes in v2:
* Add Acked-by from Conor (Thanks!)
* Fix touchscreen node names (Thanks Fabio!)

Quoted 5 lines

Frieder Schrempf (3):
dt-bindings: vendor-prefixes: Add Sielaff

dt-bindings: arm: fsl: Add Sielaff i.MX6 Solo board
ARM: dts: imx6dl: Add support for Sielaff i.MX6 Solo board

Applied both, thanks!