ALSA: usb-audio: add quirk for RODE NT-USB+
PATCH 1/1 ALSA: usb-audio: add quirk for RODE NT-USB+
The RODE NT-USB+ is marketed as a professional usb microphone, however the usb audio interface is a mess:
[ 1.130977] usb 1-5: new full-speed USB device number 2 using xhci_hcd [ 1.503906] usb 1-5: config 1 has an invalid interface number: 5 but max is 4 [ 1.503912] usb 1-5: config 1 has no interface number 4 [ 1.519689] usb 1-5: New USB device found, idVendor=19f7, idProduct=0035, bcdDevice= 1.09 [ 1.519695] usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 1.519697] usb 1-5: Product: RØDE NT-USB+ [ 1.519699] usb 1-5: Manufacturer: RØDE [ 1.519700] usb 1-5: SerialNumber: 1D773A1A [ 8.327495] usb 1-5: 1:1: cannot get freq at ep 0x82 [ 8.344500] usb 1-5: 1:2: cannot get freq at ep 0x82 [ 8.365499] usb 1-5: 2:1: cannot get freq at ep 0x2
Add QUIRK_FLAG_GET_SAMPLE_RATE to work around the broken sample rate get. I have asked Rode support to fix it, but they show no interest.
Signed-off-by Sean Young <[email protected]>
--- sound/usb/quirks.c | 2 ++ 1 file changed, 2 insertions(+)
sound/usb/quirks.c +2 -0
@@ -2179,6 +2179,8 @@ static const struct usb_audio_quirk_flags_table quirk_flags_table[] = { QUIRK_FLAG_FIXED_RATE),DEVICE_FLG (0x1bcf ,0x2283 ,/* NexiGo N930AF FHD Webcam */ QUIRK_FLAG_GET_SAMPLE_RATE ), +DEVICE_FLG (0x19f7 ,0x0035 ,/* RODE NT-USB+ */ +QUIRK_FLAG_GET_SAMPLE_RATE ),/* Vendor matches */ VENDOR_FLG(0x045e, /* MS Lifecam */
Signature · 1 line
2.43.0
Quoted 16 lines · Sean Young
The RODE NT-USB+ is marketed as a professional usb microphone, however the usb audio interface is a mess:
[ 1.130977] usb 1-5: new full-speed USB device number 2 using xhci_hcd [ 1.503906] usb 1-5: config 1 has an invalid interface number: 5 but max is 4 [ 1.503912] usb 1-5: config 1 has no interface number 4 [ 1.519689] usb 1-5: New USB device found, idVendor=19f7, idProduct=0035, bcdDevice= 1.09 [ 1.519695] usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 1.519697] usb 1-5: Product: RØDE NT-USB+ [ 1.519699] usb 1-5: Manufacturer: RØDE [ 1.519700] usb 1-5: SerialNumber: 1D773A1A [ 8.327495] usb 1-5: 1:1: cannot get freq at ep 0x82 [ 8.344500] usb 1-5: 1:2: cannot get freq at ep 0x82 [ 8.365499] usb 1-5: 2:1: cannot get freq at ep 0x2
Quoted 4 lines
Add
QUIRK_FLAG_GET_SAMPLE_RATEto work around the broken sample rate get. I have asked Rode support to fix it, but they show no interest.Signed-off-by Sean Young <[email protected]>
Applied now. Thanks.
Takashi