Skip to contentSkip to conversation

ALSA: usb-audio: add quirk for RODE NT-USB+

PATCH In review Sean Young 2 participants 2 messages Jan 24, 2024 Sound

lore
Share & tools
lore

Sean Young

author
#0 lore raw

PATCH 1/1 ALSA: usb-audio: add quirk for RODE NT-USB+

The RODE NT-USB+ is marketed as a professional usb microphone, however the usb audio interface is a mess:

[    1.130977] usb 1-5: new full-speed USB device number 2 using xhci_hcd
[    1.503906] usb 1-5: config 1 has an invalid interface number: 5 but max is 4
[    1.503912] usb 1-5: config 1 has no interface number 4
[    1.519689] usb 1-5: New USB device found, idVendor=19f7, idProduct=0035, bcdDevice= 1.09
[    1.519695] usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    1.519697] usb 1-5: Product: RØDE NT-USB+
[    1.519699] usb 1-5: Manufacturer: RØDE
[    1.519700] usb 1-5: SerialNumber: 1D773A1A
[    8.327495] usb 1-5: 1:1: cannot get freq at ep 0x82
[    8.344500] usb 1-5: 1:2: cannot get freq at ep 0x82
[    8.365499] usb 1-5: 2:1: cannot get freq at ep 0x2

Add QUIRK_FLAG_GET_SAMPLE_RATE to work around the broken sample rate get. I have asked Rode support to fix it, but they show no interest.

---
 sound/usb/quirks.c | 2 ++
 1 file changed, 2 insertions(+)
sound/usb/quirks.c +2 -0
index 07cc6a201579a..6f1f0712e7dc5 100644
@@ -2179,6 +2179,8 @@ static const struct usb_audio_quirk_flags_table quirk_flags_table[] = {
 		   QUIRK_FLAG_FIXED_RATE),
 	DEVICE_FLG(0x1bcf, 0x2283, /* NexiGo N930AF FHD Webcam */
 		   QUIRK_FLAG_GET_SAMPLE_RATE),
+	DEVICE_FLG(0x19f7, 0x0035, /* RODE NT-USB+ */
+		   QUIRK_FLAG_GET_SAMPLE_RATE),
 
 	/* Vendor matches */
 	VENDOR_FLG(0x045e, /* MS Lifecam */
Signature · 1 line
2.43.0
#1 lore raw
Quoted 16 lines · Sean Young

The RODE NT-USB+ is marketed as a professional usb microphone, however the usb audio interface is a mess:

[    1.130977] usb 1-5: new full-speed USB device number 2 using xhci_hcd
[    1.503906] usb 1-5: config 1 has an invalid interface number: 5 but max is 4
[    1.503912] usb 1-5: config 1 has no interface number 4
[    1.519689] usb 1-5: New USB device found, idVendor=19f7, idProduct=0035, bcdDevice= 1.09
[    1.519695] usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    1.519697] usb 1-5: Product: RØDE NT-USB+
[    1.519699] usb 1-5: Manufacturer: RØDE
[    1.519700] usb 1-5: SerialNumber: 1D773A1A
[    8.327495] usb 1-5: 1:1: cannot get freq at ep 0x82
[    8.344500] usb 1-5: 1:2: cannot get freq at ep 0x82
[    8.365499] usb 1-5: 2:1: cannot get freq at ep 0x2
Quoted 4 lines

Add QUIRK_FLAG_GET_SAMPLE_RATE to work around the broken sample rate get. I have asked Rode support to fix it, but they show no interest.

Applied now. Thanks.

Takashi