bcachefs fails to mount loop device on kernel
Hi all,
bcachefs fails to mount loop device on kernel on both 6.7 and 6.8.0-rc1. Is mounting loop even supported?
dd if=/dev/zero of=test_file bs=400M count=1
losetup /dev/loop0 test_file
mkfs.bcachefs /dev/loop0
mount -t bcachefs -o loop test_file /mnt
=> Unknown command /dev/loop0
modprobe bcachefs
mount -t bcachefs -o loop test_file /mnt
=> mount: /mnt: failed to setup loop device for test_file.
mount -t bcachefs test_file /mnt
=> Unknown command test_file
mount -t bcachefs -o loop /dev/loop0 /mnt
=> Unknown command /dev/loop1
mount -t bcachefs /dev/loop0 /mnt
=> Unknown command /dev/loop0
bcachefs mount /dev/loop0 /mnt
=> Unknown command mount
Thanks for info.
Kind regards,
Petr
Quoted 9 lines · Petr Vorel
Hi all,
bcachefs fails to mount loop device on kernel on both 6.7 and 6.8.0-rc1. Is mounting loop even supported?
[...]
bcachefs mount
/dev/loop0/mnt
=> Unknown command mount
What version of the bcachefs CLI tool are you using? Is it distribution provided or did you build it yourself?
The mount command has been implemented in Rust for a while (since 28f703cc256f "Rust now integrated into bcachefs binary") and if building without Rust support (BCACHEFS_NO_RUST defined), that command won't be included in the binary.
In more recent versions of bcachefs-tools, building without Rust is not supported at all.
I don't think this has anything to do with loop devices specifically.
- Thomas Bertschinger
Quoted 6 lines · Petr Vorel
Quoted 4 lines
Hi all,
bcachefs fails to mount loop device on kernel on both 6.7 and 6.8.0-rc1. Is mounting loop even supported?
Quoted 7 lines
Quoted 4 lines
[...]
bcachefs mount
/dev/loop0/mnt
=> Unknown command mountWhat version of the bcachefs CLI tool are you using? Is it distribution provided or did you build it yourself?
Official openSUSE Tumbleweed package:
$ rpm -qf $(which bcachefs) bcachefs-tools-1.4.0-1.1.x86_64
BTW this was found with LTP, which has 2 APIs: C API, which uses mount(2) which works well and shell API which uses mount (which uses bcachefs) and here it fails.
Kind regards,
Petr
Quoted 11 lines
The mount command has been implemented in Rust for a while (since
28f703cc256f"Rust now integrated into bcachefs binary") and if building without Rust support (BCACHEFS_NO_RUSTdefined), that command won't be included in the binary.In more recent versions of bcachefs-tools, building without Rust is not supported at all.
I don't think this has anything to do with loop devices specifically.
- Thomas Bertschinger
Quoted 11 lines · Petr Vorel
Quoted 10 lines · Petr Vorel
Quoted 9 lines
Hi all,
bcachefs fails to mount loop device on kernel on both 6.7 and 6.8.0-rc1. Is mounting loop even supported?
[...]
bcachefs mount
/dev/loop0/mnt
=> Unknown command mount
Quoted 7 lines
Quoted 2 lines
What version of the bcachefs CLI tool are you using? Is it distribution provided or did you build it yourself?
Official openSUSE Tumbleweed package:
$ rpm -qf $(which bcachefs) bcachefs-tools-1.4.0-1.1.x86_64
Sounds like Suse isn't building with our Rust code - but, that's about to become mandatory...
Quoted 15 lines · Petr Vorel
Quoted 13 lines
Quoted 13 lines · Petr Vorel
Quoted 9 lines
Hi all,
bcachefs fails to mount loop device on kernel on both 6.7 and 6.8.0-rc1. Is mounting loop even supported?
[...]
bcachefs mount
/dev/loop0/mnt
=> Unknown command mountWhat version of the bcachefs CLI tool are you using? Is it distribution provided or did you build it yourself?
Quoted 7 lines
Quoted 4 lines
Official openSUSE Tumbleweed package:
$ rpm -qf $(which bcachefs) bcachefs-tools-1.4.0-1.1.x86_64Sounds like Suse isn't building with our Rust code - but, that's about to become mandatory...
Indeed NO_RUST=1. Thank you both for a quick info!
Kind regards,
Petr