Skip to contentSkip to conversation

bcachefs fails to mount loop device on kernel

DISCUSSION Petr Vorel 3 participants 5 messages Jan 24, 2024

lore
Share & tools
lore

Petr Vorel

author
#0 lore raw

Hi all,

bcachefs fails to mount loop device on kernel on both 6.7 and 6.8.0-rc1. Is mounting loop even supported?

dd if=/dev/zero of=test_file bs=400M count=1
losetup /dev/loop0 test_file
mkfs.bcachefs /dev/loop0

mount -t bcachefs -o loop test_file /mnt
=> Unknown command /dev/loop0

modprobe bcachefs
mount -t bcachefs -o loop test_file /mnt
=> mount: /mnt: failed to setup loop device for test_file.

mount -t bcachefs test_file /mnt
=> Unknown command test_file

mount -t bcachefs -o loop /dev/loop0 /mnt
=> Unknown command /dev/loop1

mount -t bcachefs /dev/loop0 /mnt
=> Unknown command /dev/loop0

bcachefs mount /dev/loop0 /mnt
=> Unknown command mount

Thanks for info.

Kind regards,
Petr

#1 lore raw
Quoted 9 lines · Petr Vorel

Hi all,

bcachefs fails to mount loop device on kernel on both 6.7 and 6.8.0-rc1. Is mounting loop even supported?

[...]

bcachefs mount /dev/loop0 /mnt
=> Unknown command mount

What version of the bcachefs CLI tool are you using? Is it distribution provided or did you build it yourself?

The mount command has been implemented in Rust for a while (since 28f703cc256f "Rust now integrated into bcachefs binary") and if building without Rust support (BCACHEFS_NO_RUST defined), that command won't be included in the binary.

In more recent versions of bcachefs-tools, building without Rust is not supported at all.

I don't think this has anything to do with loop devices specifically.

- Thomas Bertschinger

author
#2 lore raw
Quoted 6 lines · Petr Vorel
Quoted 4 lines

Hi all,

bcachefs fails to mount loop device on kernel on both 6.7 and 6.8.0-rc1. Is mounting loop even supported?

Quoted 7 lines
Quoted 4 lines

[...]

bcachefs mount /dev/loop0 /mnt
=> Unknown command mount

What version of the bcachefs CLI tool are you using? Is it distribution provided or did you build it yourself?

Official openSUSE Tumbleweed package:

$ rpm -qf $(which bcachefs)
bcachefs-tools-1.4.0-1.1.x86_64

BTW this was found with LTP, which has 2 APIs: C API, which uses mount(2) which works well and shell API which uses mount (which uses bcachefs) and here it fails.

Kind regards,
Petr

Quoted 11 lines

The mount command has been implemented in Rust for a while (since 28f703cc256f "Rust now integrated into bcachefs binary") and if building without Rust support (BCACHEFS_NO_RUST defined), that command won't be included in the binary.

In more recent versions of bcachefs-tools, building without Rust is not supported at all.

I don't think this has anything to do with loop devices specifically.

- Thomas Bertschinger

#3 lore raw
Quoted 11 lines · Petr Vorel
Quoted 10 lines · Petr Vorel
Quoted 9 lines

Hi all,

bcachefs fails to mount loop device on kernel on both 6.7 and 6.8.0-rc1. Is mounting loop even supported?

[...]

bcachefs mount /dev/loop0 /mnt
=> Unknown command mount

Quoted 7 lines
Quoted 2 lines

What version of the bcachefs CLI tool are you using? Is it distribution provided or did you build it yourself?

Official openSUSE Tumbleweed package:

$ rpm -qf $(which bcachefs)
bcachefs-tools-1.4.0-1.1.x86_64

Sounds like Suse isn't building with our Rust code - but, that's about to become mandatory...

author
#4 lore raw
Quoted 15 lines · Petr Vorel
Quoted 13 lines
Quoted 13 lines · Petr Vorel
Quoted 9 lines

Hi all,

bcachefs fails to mount loop device on kernel on both 6.7 and 6.8.0-rc1. Is mounting loop even supported?

[...]

bcachefs mount /dev/loop0 /mnt
=> Unknown command mount

What version of the bcachefs CLI tool are you using? Is it distribution provided or did you build it yourself?

Quoted 7 lines
Quoted 4 lines

Official openSUSE Tumbleweed package:

$ rpm -qf $(which bcachefs)
bcachefs-tools-1.4.0-1.1.x86_64

Sounds like Suse isn't building with our Rust code - but, that's about to become mandatory...

Indeed NO_RUST=1. Thank you both for a quick info!

Kind regards,
Petr