mm: report per-page metadata information
Subsystems (9)
v9 cover mm: report per-page metadata information
Changelog:
v9: - Quick Fix:
- In fs/proc/meminfo.c, replaced tabs with spaces for consistent userspace parsing.
- Patch is ready to be taken in.
v8:
- Addressed Powerpc (Power8 LE) boot failure.
- In __populate_section_memmap instead of calling mod_node_page_state (unavaialable at boot for powerpc), we call mod_node_early_perpage_metadata. This was a helper function that was introduced for arm, to combat this exact problem.
- Since __populate_section_memmap is tagged with __meminit, we also had to modify the tag of mod_node_early_perpage_metadata from __init to __meminit.
- Naming Changes:
- In /proc/meminfo PageMetadata --> Memmap
- In /proc/vmstat nr_page_metadata --> nr_memmap
- In /proc/vmstat nr_page_metadata_boot --> nr_memmap_boot
- Addressed clarifications requested by Andrew Morton.
- Updated the commit log to include utility or potential usage for userspace.
- Declined changing placement of metrics after attempting:
- No changes in /proc/meminfo since it cannot be moved to the end anyway. This is because we have also hugetlb_report_meminfo() and arch_report_meminfo().
- Rebased to version 6, patchlevel 8.
v7:
- Addressed comments from David Rientjes
- For exporting PageMetadata to /proc/meminfo, utilize global_node_page_state_pages for item NR_PAGE_METADATA. This is instead of iterating over nodes and accumulating the output of node_page_state.
v6:
- Interface changes
- Added per-node nr_page_metadata and nr_page_metadata_boot fields that are exported in /sys/devices/system/node/nodeN/vmstat
- nr_page_metadata exclusively tracks buddy allocations while nr_page_metadata_boot exclusively tracks memblock allocations.
- Modified PageMetadata in /proc/meminfo to only include buddy allocations so that it is comparable against MemTotal in /proc/meminfo
- Removed the PageMetadata field added in /sys/devices/system/node/nodeN/meminfo
- Addressed bugs reported by the kernel test bot.
- All occurences of __mod_node_page_state have been replaced by mod_node_page_state.
- Addressed comments from Muchun Song.
- Removed page meta data accouting from mm/hugetlb.c. When CONFIG_SPARSEMEM_VMEMMAP is disabled struct pages should not be returned to buddy.
- Modified the cover letter with the results and analysis
- From when memory_hotplug.memmap_on_memory is alternated between 0 and 1.
- To account for the new interface changes.
v5:
- Addressed comments from Muchun Song.
- Fixed errors introduced in v4 when CONFIG_SPARSEMEM_VMEMMAP is disabled by testing against FLATMEM and SPARSEMEM memory models.
- Handled the condition wherein the allocation of walk.reuse_page fails, by moving NR_PAGE_METADATA update into the clause if( walk.reuse_page ).
- Removed the usage of DIV_ROUND_UP from alloc_vmemmap_page_list since "end - start" is always a multiple of PAGE_SIZE.
- Modified alloc_vmemmap_page_list to update NR_PAGE_METADATA once instead of every loop.
v4:
- Addressed comment from Matthew Wilcox.
- Used __node_stat_sub_folio and __node_stat_add_folio instead of __mod_node_page_state in mm/hugetlb.c.
- Used page_pgdat wherever possible in the entire patch.
- Used DIV_ROUND_UP() wherever possible in the entire patch.
v3:
- Addressed one comment from Matthew Wilcox.
- In free_page_ext, page_pgdat() is now extracted prior to freeing the memory.
v2:
- Fixed the three bugs reported by kernel test robot.
- Enhanced the commit message as recommended by David Hildenbrand.
- Addressed comments from Matthew Wilcox:
- Simplified alloc_vmemmap_page_list() and free_page_ext() as recommended.
- Used the appropriate comment style in mm/vmstat.c.
- Replaced writeout_early_perpage_metadata() with store_early_perpage_metadata() to reduce ambiguity with what swap does.
- Addressed comments from Mike Rapoport:
- Simplified the loop in alloc_vmemmap_page_list().
- Could NOT address a comment to move store_early_perpage_metadata() near where nodes and page allocator are initialized.
- Included the vmalloc()ed page_ext in accounting within free_page_ext().
- Made early_perpage_metadata[MAX_NUMNODES] static.
Previous approaches and discussions
-----------------------------------
V8:
https://lore.kernel.org/all/[email protected]
V7:
https://lore.kernel.org/all/[email protected]
V6:
https://lore.kernel.org/all/[email protected]
v5:
https://lore.kernel.org/all/[email protected]
v4:
https://lore.kernel.org/all/[email protected]
v3:
https://lore.kernel.org/all/[email protected]
v2:
https://lore.kernel.org/all/[email protected]
v1:
https://lore.kernel.org/r/[email protected]
Hi!
This patch adds two new per-node fields, namely nr_memmap and nr_memmap_boot to /sys/devices/system/node/nodeN/vmstat and a global Memmap field to /proc/meminfo. This information can be used by users to see how much memory is being used by per-page metadata, which can vary depending on build configuration, machine architecture, and system use.
Per-page metadata is the amount of memory that Linux needs in order to manage memory at the page granularity. The majority of such memory is used by "struct page" and "page_ext" data structures.
Background
----------
Kernel overhead observability is missing some of the largest allocations during runtime, including vmemmap (struct pages) and page_ext. This patch aims to address this problem by exporting a new metric Memmap.
On the contrary, the kernel does provide observibility for boot memory allocations. For example, the metric reserved_pages depicts the pages allocated by the bootmem allocator. This can be simply calculated as present_pages - managed_pages, which are both exported in /proc/zoneinfo. The metric reserved_pages is primarily composed of struct pages and page_ext.
What about the struct pages (allocated by bootmem allocator) that are free'd during hugetlbfs allocations and then allocated by buddy-allocator once hugtlbfs pages are free'd?
/proc/meminfo MemTotal changes: MemTotal does not include memblock allocations but includes buddy allocations. However, during runtime memblock allocations can be shifted into buddy allocations, and therefore become part of MemTotal.
Once the struct pages get allocated by buddy allocator, we lose track of these struct page allocations overhead accounting. Therefore, we must export new metrics. nr_memmap and nr_memmap_boot exclusively track the struct page and page ext allocations made by the buddy allocator and memblock allocator, respectively for each node. Memmap in /proc/meminfo would report the struct page and page ext allocations made by the buddy allocator.
Results and analysis
--------------------
Memory model: Sparsemem-vmemmap
$ echo 1 > /proc/sys/vm/hugetlb_optimize_vmemmap
$ cat /proc/meminfo | grep MemTotal
MemTotal: 32919124 kB
$ cat /proc/meminfo | grep Memmap
Memmap: 65536 kB
$ cat /sys/devices/system/node/node0/vmstat | grep "nr_memmap"
nr_memmap 8192
nr_memmap_boot 65536
$ cat /sys/devices/system/node/node1/vmstat | grep "nr_memmap"
nr_memmap 8192
nr_memmap_boot 65536AFTER HUGTLBFS RESERVATION
$ echo 512 > /proc/sys/vm/nr_hugepages
$ cat /proc/meminfo | grep MemTotal MemTotal: 32935508 kB $ cat /proc/meminfo | grep Memmap Memmap: 67584 kB $ cat /sys/devices/system/node/node0/vmstat | grep "nr_memmap" nr_memmap 8448 nr_memmap_boot 63488 $ cat /sys/devices/system/node/node0/vmstat | grep "nr_memmap" nr_memmap 8448 nr_memmap_boot 63488
AFTER FREEING HUGTLBFS RESERVATION
$ echo 0 > /proc/sys/vm/nr_hugepages
$ cat /proc/meminfo | grep MemTotal
MemTotal: 32935508 kB
$ cat /proc/meminfo | grep Memmap
Memmap: 81920 kB
$ cat /sys/devices/system/node/node0/vmstat | grep "nr_memmap"
nr_memmap 10240
nr_memmap_boot 63488
$ cat /sys/devices/system/node/node0/vmstat | grep "nr_memmap"
nr_memmap 10240
nr_memmap_boot 63488------------------------
Memory Hotplug with memory_hotplug.memmap_on_memory=1
BEFORE HOTADD
$ cat /proc/meminfo | grep MemTotal MemTotal: 32919124 kB $ cat /proc/meminfo | grep Memmap Memmap: 65536 kB $ cat /sys/devices/system/node/node0/vmstat | grep "nr_memmap" nr_memmap 8192 nr_memmap_boot 65536 $ cat /sys/devices/system/node/node0/vmstat | grep "nr_memmap" nr_memmap 8192 nr_memmap_boot 65536
AFTER HOTADDING 1GB
$ cat /proc/meminfo | grep MemTotal MemTotal: 33951316 kB $ cat /proc/meminfo | grep Memmap Memmap: 83968 kB $ cat /sys/devices/system/node/node0/vmstat | grep "nr_memmap" nr_memmap 12800 nr_memmap_boot 65536 $ cat /sys/devices/system/node/node0/vmstat | grep "nr_memmap" nr_memmap 8192 nr_memmap_boot 65536
--------------------------
Memory Hotplug with memory_hotplug.memmap_on_memory=0
BEFORE HOTADD
$ cat /proc/meminfo | grep MemTotal MemTotal: 32919124 kB $ cat /proc/meminfo | grep Memmap Memmap: 65536 kB $ cat /sys/devices/system/node/node0/vmstat | grep "nr_memmap" nr_memmap 8192 nr_memmap_boot 65536 $ cat /sys/devices/system/node/node0/vmstat | grep "nr_memmap" nr_memmap 8192 nr_memmap_boot 65536
AFTER HOTADDING 1GB
$ cat /proc/meminfo | grep MemTotal MemTotal: 33967700 kB $ cat /proc/meminfo | grep Memmap Memmap: 83968 kB $ cat /sys/devices/system/node/node0/vmstat | grep "nr_memmap" nr_memmap 12800 nr_memmap_boot 65536 $ cat /sys/devices/system/node/node0/vmstat | grep "nr_memmap" nr_memmap 8192 nr_memmap_boot 65536
Sourav Panda (1):
mm: report per-page metadata information
Documentation/filesystems/proc.rst | 3 +++ fs/proc/meminfo.c | 4 ++++ include/linux/mmzone.h | 4 ++++ include/linux/vmstat.h | 4 ++++ mm/hugetlb_vmemmap.c | 17 ++++++++++++---- mm/mm_init.c | 3 +++ mm/page_alloc.c | 1 + mm/page_ext.c | 32 +++++++++++++++++++++--------- mm/sparse-vmemmap.c | 8 ++++++++ mm/sparse.c | 7 ++++++- mm/vmstat.c | 26 +++++++++++++++++++++++- 11 files changed, 94 insertions(+), 15 deletions(-)
Signature · 1 line
2.44.0.rc0.258.g7320e95886-goog
PATCH v9 1/1 mm: report per-page metadata information
Adds two new per-node fields, namely nr_memmap and nr_memmap_boot, to /sys/devices/system/node/nodeN/vmstat and a global Memmap field to /proc/meminfo. This information can be used by users to see how much memory is being used by per-page metadata, which can vary depending on build configuration, machine architecture, and system use.
Per-page metadata is the amount of memory that Linux needs in order to manage memory at the page granularity. The majority of such memory is used by "struct page" and "page_ext" data structures. In contrast to most other memory consumption statistics, per-page metadata might not be included in MemTotal. For example, MemTotal does not include memblock allocations but includes buddy allocations. In this patch, exported field nr_memmap in /sys/devices/system/node/nodeN/vmstat would exclusively track buddy allocations while nr_memmap_boot would exclusively track memblock allocations. Furthermore, Memmap in /proc/meminfo would exclusively track buddy allocations allowing it to be compared against MemTotal.
This memory depends on build configurations, machine architectures, and the way system is used:
Build configuration may include extra fields into "struct page", and enable / disable "page_ext"
Machine architecture defines base page sizes. For example 4K x86, 8K SPARC, 64K ARM64 (optionally), etc. The per-page metadata overhead is smaller on machines with larger page sizes. System use can change per-page overhead by using vmemmap optimizations with hugetlb pages, and emulated pmem devdax pages. Also, boot parameters can determine whether page_ext is needed to be allocated. This memory can be part of MemTotal or be outside MemTotal depending on whether the memory was hot-plugged, booted with, or hugetlb memory was returned back to the system.
Utility for userspace:
Application Optimization: Depending on the kernel version and command line options, the kernel would relinquish a different number of pages (that contain struct pages) when a hugetlb page is reserved (e.g., 0, 6 or 7 for a 2MB hugepage). The userspace application would want to know the exact savings achieved through page metadata deallocation without dealing with the intricacies of the kernel.
Observability: Struct page overhead can only be calculated on-paper at boot time (e.g., 1.5% machine capacity). Beyond boot once hugepages are reserved or memory is hotplugged, the computation becomes complex. Per-page metrics will help explain part of the system memory overhead, which shall help guide memory optimizations and memory cgroup sizing.
Debugging: Tracking the changes or absolute value in struct pages can help detect anomalies as they can be correlated with other metrics in the machine (e.g., memtotal, number of huge pages, etc).
page_ext overheads: Some kernel features such as page_owner page_table_check that use page_ext can be optionally enabled via kernel parameters. Having the total per-page metadata information helps users precisely measure impact.
--- Documentation/filesystems/proc.rst | 3 +++ fs/proc/meminfo.c | 4 ++++ include/linux/mmzone.h | 4 ++++ include/linux/vmstat.h | 4 ++++ mm/hugetlb_vmemmap.c | 17 ++++++++++++---- mm/mm_init.c | 3 +++ mm/page_alloc.c | 1 + mm/page_ext.c | 32 +++++++++++++++++++++--------- mm/sparse-vmemmap.c | 8 ++++++++ mm/sparse.c | 7 ++++++- mm/vmstat.c | 26 +++++++++++++++++++++++- 11 files changed, 94 insertions(+), 15 deletions(-)
Documentation/filesystems/proc.rst +3 -0
@@ -993,6 +993,7 @@ Example output. You may not have all of these fields. AnonPages: 4654780 kB Mapped: 266244 kB Shmem: 9976 kB + Memmap: 513419 kB KReclaimable: 517708 kB Slab: 660044 kB SReclaimable: 517708 kB
@@ -1095,6 +1096,8 @@ Mapped files which have been mmapped, such as libraries Shmem Total memory used by shared memory (shmem) and tmpfs +Memmap + Memory used for per-page metadata KReclaimable Kernel allocations that the kernel will attempt to reclaim under memory pressure. Includes SReclaimable (below), and other
fs/proc/meminfo.c +4 -0
@@ -39,6 +39,7 @@ static int meminfo_proc_show(struct seq_file *m, void *v)long available;unsigned long pages[NR_LRU_LISTS ];unsigned long sreclaimable, sunreclaim; +unsigned long nr_memmap;int lru;si_meminfo (&i);
@@ -57,6 +58,8 @@ static int meminfo_proc_show(struct seq_file *m, void *v) sreclaimable =global_node_page_state_pages (NR_SLAB_RECLAIMABLE_B ); sunreclaim =global_node_page_state_pages (NR_SLAB_UNRECLAIMABLE_B ); + nr_memmap =global_node_page_state_pages (NR_MEMMAP ); +show_val_kb (m,"MemTotal: " , i.totalram);show_val_kb (m,"MemFree: " , i.freeram);show_val_kb (m,"MemAvailable: " , available);
@@ -104,6 +107,7 @@ static int meminfo_proc_show(struct seq_file *m, void *v)show_val_kb (m,"Mapped: " ,global_node_page_state (NR_FILE_MAPPED ));show_val_kb (m,"Shmem: " , i.sharedram); +show_val_kb (m,"Memmap: " , nr_memmap);show_val_kb (m,"KReclaimable: " , sreclaimable +global_node_page_state (NR_KERNEL_MISC_RECLAIMABLE ));show_val_kb (m,"Slab: " , sreclaimable + sunreclaim);
include/linux/mmzone.h +4 -0
@@ -214,6 +214,10 @@ enum node_stat_item {PGDEMOTE_KSWAPD ,PGDEMOTE_DIRECT ,PGDEMOTE_KHUGEPAGED , +NR_MEMMAP ,/* Page metadata size (struct page and page_ext) +* in pages +*/ +NR_MEMMAP_BOOT ,/* NR_MEMMAP for bootmem */ NR_VM_NODE_STAT_ITEMS };
include/linux/vmstat.h +4 -0
@@ -632,4 +632,8 @@ static inline void lruvec_stat_sub_folio(struct folio *folio, {lruvec_stat_mod_folio (folio, idx, -folio_nr_pages (folio)); } + +void __meminit mod_node_early_perpage_metadata (int nid,long delta); +void __meminit store_early_perpage_metadata (void ); +#endif /* _LINUX_VMSTAT_H */
mm/hugetlb_vmemmap.c +13 -4
@@ -184,10 +184,13 @@ static int vmemmap_remap_range(unsigned long start, unsigned long end,*/ static inline void free_vmemmap_page (struct page *page) { -if (PageReserved (page)) +if (PageReserved (page)) {free_bootmem_page (page); -else +mod_node_page_state (page_pgdat (page),NR_MEMMAP_BOOT ,-1 ); + }else {__free_page (page); +mod_node_page_state (page_pgdat (page),NR_MEMMAP ,-1 ); + } }/* Free a list of the vmemmap pages */
@@ -338,6 +341,7 @@ static int vmemmap_remap_free(unsigned long start, unsigned long end,copy_page (page_to_virt (walk.reuse_page), (void *)walk.reuse_addr);list_add (&walk.reuse_page->lru, vmemmap_pages); +mod_node_page_state (NODE_DATA (nid),NR_MEMMAP ,1 ); }/*
@@ -384,14 +388,19 @@ static int alloc_vmemmap_page_list(unsigned long start, unsigned long end,unsigned long nr_pages = (end - start) >>PAGE_SHIFT ;int nid =page_to_nid ((struct page *)start);struct page *page, *next; +int i; -while (nr_pages--) { +for (i =0 ; i < nr_pages; i++) { page =alloc_pages_node (nid, gfp_mask,0 ); -if (!page) +if (!page) { +mod_node_page_state (NODE_DATA (nid),NR_MEMMAP , i); goto out; + }list_add (&page->lru, list); } +mod_node_page_state (NODE_DATA (nid),NR_MEMMAP , nr_pages); +return 0 ; out:list_for_each_entry_safe (page, next, list, lru)
mm/mm_init.c +3 -0
@@ -27,6 +27,7 @@#include <linux/swap.h> #include <linux/cma.h> #include <linux/crash_dump.h> +#include <linux/vmstat.h> #include "internal.h" #include "slab.h" #include "shuffle.h"
@@ -1656,6 +1657,8 @@ static void __init alloc_node_mem_map(struct pglist_data *pgdat)panic ("Failed to allocate %ld bytes for node %d memory map\n" , size, pgdat->node_id); pgdat->node_mem_map = map + offset; +mod_node_early_perpage_metadata (pgdat->node_id, +DIV_ROUND_UP (size,PAGE_SIZE ));pr_debug ("%s: node %d, pgdat %08lx, node_mem_map %08lx\n" , __func__, pgdat->node_id, (unsigned long )pgdat, (unsigned long )pgdat->node_mem_map);
mm/page_alloc.c +1 -0
@@ -5635,6 +5635,7 @@ void __init setup_per_cpu_pageset(void)for_each_online_pgdat (pgdat) pgdat->per_cpu_nodestats = alloc_percpu(struct per_cpu_nodestat); +store_early_perpage_metadata (); }__meminit void zone_pcp_init (struct zone *zone)
mm/page_ext.c +23 -9
@@ -201,6 +201,8 @@ static int __init alloc_node_page_ext(int nid)return -ENOMEM ;NODE_DATA (nid)->node_page_ext = base; total_usage += table_size; +mod_node_page_state (NODE_DATA (nid),NR_MEMMAP_BOOT , +DIV_ROUND_UP (table_size,PAGE_SIZE ));return 0 ; }
@@ -255,12 +257,15 @@ static void *__meminit alloc_page_ext(size_t size, int nid)void *addr =NULL ; addr =alloc_pages_exact_nid (nid, size, flags); -if (addr) { +if (addr)kmemleak_alloc (addr, size,1 , flags); -return addr; - } +else + addr =vzalloc_node (size, nid); - addr =vzalloc_node (size, nid); +if (addr) { +mod_node_page_state (NODE_DATA (nid),NR_MEMMAP , +DIV_ROUND_UP (size,PAGE_SIZE )); + }return addr; }
@@ -303,18 +308,27 @@ static int __meminit init_section_page_ext(unsigned long pfn, int nid)static void free_page_ext (void *addr) { +size_t table_size; +struct page *page; +struct pglist_data *pgdat; + + table_size = page_ext_size *PAGES_PER_SECTION ; +if (is_vmalloc_addr (addr)) { + page =vmalloc_to_page (addr); + pgdat =page_pgdat (page);vfree (addr); }else { -struct page *page =virt_to_page (addr); -size_t table_size; - - table_size = page_ext_size *PAGES_PER_SECTION ; - + page =virt_to_page (addr); + pgdat =page_pgdat (page);BUG_ON (PageReserved (page));kmemleak_free (addr);free_pages_exact (addr, table_size); } + +mod_node_page_state (pgdat,NR_MEMMAP , +-1L * (DIV_ROUND_UP (table_size,PAGE_SIZE ))); + }static void __free_page_ext (unsigned long pfn)
mm/sparse-vmemmap.c +8 -0
@@ -469,5 +469,13 @@ struct page * __meminit __populate_section_memmap(unsigned long pfn,if (r <0 )return NULL ; +if (system_state ==SYSTEM_BOOTING ) { +mod_node_early_perpage_metadata (nid,DIV_ROUND_UP (end - start, +PAGE_SIZE )); + }else { +mod_node_page_state (NODE_DATA (nid),NR_MEMMAP , +DIV_ROUND_UP (end - start,PAGE_SIZE )); + } +return pfn_to_page (pfn); }
mm/sparse.c +6 -1
@@ -14,7 +14,7 @@#include <linux/swap.h> #include <linux/swapops.h> #include <linux/bootmem_info.h> - +#include <linux/vmstat.h> #include "internal.h" #include <asm/dma.h>
@@ -465,6 +465,9 @@ static void __init sparse_buffer_init(unsigned long size, int nid)*/ sparsemap_buf =memmap_alloc (size,section_map_size (), addr, nid, true); sparsemap_buf_end = sparsemap_buf + size; +#ifndef CONFIG_SPARSEMEM_VMEMMAP +mod_node_early_perpage_metadata (nid,DIV_ROUND_UP (size,PAGE_SIZE )); +#endif }static void __init sparse_buffer_fini (void )
@@ -641,6 +644,8 @@ static void depopulate_section_memmap(unsigned long pfn, unsigned long nr_pages,unsigned long start = (unsigned long )pfn_to_page (pfn);unsigned long end = start + nr_pages *sizeof (struct page ); +mod_node_page_state (page_pgdat (pfn_to_page (pfn)),NR_MEMMAP , +-1L * (DIV_ROUND_UP (end - start,PAGE_SIZE )));vmemmap_free (start, end, altmap); }static void free_map_bootmem (struct page *memmap)
mm/vmstat.c +25 -1
@@ -1252,7 +1252,8 @@ const char * const vmstat_text[] = {"pgdemote_kswapd" ,"pgdemote_direct" ,"pgdemote_khugepaged" , - +"nr_memmap" , +"nr_memmap_boot" ,/* enum writeback_stat_item counters */ "nr_dirty_threshold" , "nr_dirty_background_threshold",
@@ -2279,4 +2280,27 @@ static int __init extfrag_debug_init(void) }module_init (extfrag_debug_init); +#endif + +/* +* Page metadata size (struct page and page_ext) in pages +*/ +static unsigned long early_perpage_metadata[MAX_NUMNODES ]__meminitdata ; + +void __meminit mod_node_early_perpage_metadata (int nid,long delta) +{ + early_perpage_metadata[nid] += delta; +} + +void __meminit store_early_perpage_metadata (void ) +{ +int nid; +struct pglist_data *pgdat; + +for_each_online_pgdat (pgdat) { + nid = pgdat->node_id; +mod_node_page_state (NODE_DATA (nid),NR_MEMMAP_BOOT , + early_perpage_metadata[nid]); + } +}
Signature · 1 line
2.44.0.rc0.258.g7320e95886-goog
Wei Xu
reviewerQuoted 7 lines · Sourav Panda
Adds two new per-node fields, namely
nr_memmapandnr_memmap_boot, to/sys/devices/system/node/nodeN/vmstatand a global Memmap field to/proc/meminfo. This information can be used by users to see how much memory is being used by per-page metadata, which can vary depending on build configuration, machine architecture, and system use.
/proc/vmstat also has the system-wide nr_memmap and nr_memmap_boot. Given that nr_memmap in /proc/vmstat provides the same info (in different units) as Memmap in /proc/meminfo, it would be better to remove Memmap from /proc/meminfo to avoid duplication and confusion.
Quoted 389 lines
Per-page metadata is the amount of memory that Linux needs in order to manage memory at the page granularity. The majority of such memory is used by "struct page" and "
page_ext" data structures. In contrast to most other memory consumption statistics, per-page metadata might not be included in MemTotal. For example, MemTotal does not include memblock allocations but includes buddy allocations. In this patch, exported fieldnr_memmapin/sys/devices/system/node/nodeN/vmstatwould exclusively track buddy allocations whilenr_memmap_bootwould exclusively track memblock allocations. Furthermore, Memmap in/proc/meminfowould exclusively track buddy allocations allowing it to be compared against MemTotal.This memory depends on build configurations, machine architectures, and the way system is used:
Build configuration may include extra fields into "struct page", and enable / disable "
page_ext"
Machine architecture defines base page sizes. For example 4K x86, 8K SPARC, 64K ARM64 (optionally), etc. The per-page metadata overhead is smaller on machines with larger page sizes. System use can change per-page overhead by using vmemmap optimizations with hugetlb pages, and emulated pmem devdax pages. Also, boot parameters can determine whetherpage_extis needed to be allocated. This memory can be part of MemTotal or be outside MemTotal depending on whether the memory was hot-plugged, booted with, or hugetlb memory was returned back to the system.Utility for userspace:
Application Optimization: Depending on the kernel version and command line options, the kernel would relinquish a different number of pages (that contain struct pages) when a hugetlb page is reserved (e.g., 0, 6 or 7 for a 2MB hugepage). The userspace application would want to know the exact savings achieved through page metadata deallocation without dealing with the intricacies of the kernel.
Observability: Struct page overhead can only be calculated on-paper at boot time (e.g., 1.5% machine capacity). Beyond boot once hugepages are reserved or memory is hotplugged, the computation becomes complex. Per-page metrics will help explain part of the system memory overhead, which shall help guide memory optimizations and memory cgroup sizing.
Debugging: Tracking the changes or absolute value in struct pages can help detect anomalies as they can be correlated with other metrics in the machine (e.g., memtotal, number of huge pages, etc).
page_extoverheads: Some kernel features such aspage_ownerpage_table_checkthat usepage_extcan be optionally enabled via kernel parameters. Having the total per-page metadata information helps users precisely measure impact.Suggested-by Pasha Tatashin <[email protected]>Signed-off-by Sourav Panda <[email protected]>--- Documentation/filesystems/proc.rst | 3 +++ fs/proc/meminfo.c | 4 ++++ include/linux/mmzone.h | 4 ++++ include/linux/vmstat.h | 4 ++++ mm/hugetlb_vmemmap.c | 17 ++++++++++++---- mm/mm_init.c | 3 +++ mm/page_alloc.c | 1 + mm/page_ext.c | 32 +++++++++++++++++++++--------- mm/sparse-vmemmap.c | 8 ++++++++ mm/sparse.c | 7 ++++++- mm/vmstat.c | 26 +++++++++++++++++++++++- 11 files changed, 94 insertions(+), 15 deletions(-)Documentation/filesystems/proc.rst +3
-0@@ -993,6 +993,7 @@ Example output. You may not have all of these fields. AnonPages: 4654780 kB Mapped: 266244 kB Shmem: 9976 kB + Memmap: 513419 kB KReclaimable: 517708 kB Slab: 660044 kB SReclaimable: 517708 kB@@ -1095,6 +1096,8 @@ Mapped files which have been mmapped, such as libraries Shmem Total memory used by shared memory (shmem) and tmpfs +Memmap + Memory used for per-page metadata KReclaimable Kernel allocations that the kernel will attempt to reclaim under memory pressure. Includes SReclaimable (below), and otherfs/proc/meminfo.c +4
-0@@ -39,6 +39,7 @@ static int meminfo_proc_show(struct seq_file *m, void *v)long available;unsigned long pages[NR_LRU_LISTS ];unsigned long sreclaimable, sunreclaim; +unsigned long nr_memmap;int lru;si_meminfo (&i);@@ -57,6 +58,8 @@ static int meminfo_proc_show(struct seq_file *m, void *v) sreclaimable =global_node_page_state_pages (NR_SLAB_RECLAIMABLE_B ); sunreclaim =global_node_page_state_pages (NR_SLAB_UNRECLAIMABLE_B ); + nr_memmap =global_node_page_state_pages (NR_MEMMAP ); +show_val_kb (m,"MemTotal: " , i.totalram);show_val_kb (m,"MemFree: " , i.freeram);show_val_kb (m,"MemAvailable: " , available);@@ -104,6 +107,7 @@ static int meminfo_proc_show(struct seq_file *m, void *v)show_val_kb (m,"Mapped: " ,global_node_page_state (NR_FILE_MAPPED ));show_val_kb (m,"Shmem: " , i.sharedram); +show_val_kb (m,"Memmap: " , nr_memmap);show_val_kb (m,"KReclaimable: " , sreclaimable +global_node_page_state (NR_KERNEL_MISC_RECLAIMABLE ));show_val_kb (m,"Slab: " , sreclaimable + sunreclaim);include/linux/mmzone.h +4
-0@@ -214,6 +214,10 @@ enum node_stat_item {PGDEMOTE_KSWAPD ,PGDEMOTE_DIRECT ,PGDEMOTE_KHUGEPAGED , +NR_MEMMAP ,/* Page metadata size (struct page and page_ext) +* in pages +*/ +NR_MEMMAP_BOOT ,/* NR_MEMMAP for bootmem */ NR_VM_NODE_STAT_ITEMS };include/linux/vmstat.h +4
-0@@ -632,4 +632,8 @@ static inline void lruvec_stat_sub_folio(struct folio *folio, {lruvec_stat_mod_folio (folio, idx, -folio_nr_pages (folio)); } + +void __meminit mod_node_early_perpage_metadata (int nid,long delta); +void __meminit store_early_perpage_metadata (void ); +#endif /* _LINUX_VMSTAT_H */ mm/hugetlb_vmemmap.c +13
-4@@ -184,10 +184,13 @@ static int vmemmap_remap_range(unsigned long start, unsigned long end,*/ static inline void free_vmemmap_page (struct page *page) { -if (PageReserved (page)) +if (PageReserved (page)) {free_bootmem_page (page); -else +mod_node_page_state (page_pgdat (page),NR_MEMMAP_BOOT ,-1 ); + }else {__free_page (page); +mod_node_page_state (page_pgdat (page),NR_MEMMAP ,-1 ); + } }/* Free a list of the vmemmap pages */ @@ -338,6 +341,7 @@ static int vmemmap_remap_free(unsigned long start, unsigned long end,copy_page (page_to_virt (walk.reuse_page), (void *)walk.reuse_addr);list_add (&walk.reuse_page->lru, vmemmap_pages); +mod_node_page_state (NODE_DATA (nid),NR_MEMMAP ,1 ); }/* @@ -384,14 +388,19 @@ static int alloc_vmemmap_page_list(unsigned long start, unsigned long end,unsigned long nr_pages = (end - start) >>PAGE_SHIFT ;int nid =page_to_nid ((struct page *)start);struct page *page, *next; +int i; -while (nr_pages--) { +for (i =0 ; i < nr_pages; i++) { page =alloc_pages_node (nid, gfp_mask,0 ); -if (!page) +if (!page) { +mod_node_page_state (NODE_DATA (nid),NR_MEMMAP , i); goto out; + }list_add (&page->lru, list); } +mod_node_page_state (NODE_DATA (nid),NR_MEMMAP , nr_pages); +return 0 ; out:list_for_each_entry_safe (page, next, list, lru)mm/mm_init.c +3
-0@@ -27,6 +27,7 @@#include <linux/swap.h> #include <linux/cma.h> #include <linux/crash_dump.h> +#include <linux/vmstat.h> #include "internal.h" #include "slab.h" #include "shuffle.h" @@ -1656,6 +1657,8 @@ static void __init alloc_node_mem_map(struct pglist_data *pgdat)panic ("Failed to allocate %ld bytes for node %d memory map\n" , size, pgdat->node_id); pgdat->node_mem_map = map + offset; +mod_node_early_perpage_metadata (pgdat->node_id, +DIV_ROUND_UP (size,PAGE_SIZE ));pr_debug ("%s: node %d, pgdat %08lx, node_mem_map %08lx\n" , __func__, pgdat->node_id, (unsigned long )pgdat, (unsigned long )pgdat->node_mem_map);mm/page_alloc.c +1
-0@@ -5635,6 +5635,7 @@ void __init setup_per_cpu_pageset(void)for_each_online_pgdat (pgdat) pgdat->per_cpu_nodestats = alloc_percpu(struct per_cpu_nodestat); +store_early_perpage_metadata (); }__meminit void zone_pcp_init (struct zone *zone)mm/page_ext.c +23
-9@@ -201,6 +201,8 @@ static int __init alloc_node_page_ext(int nid)return -ENOMEM ;NODE_DATA (nid)->node_page_ext = base; total_usage += table_size; +mod_node_page_state (NODE_DATA (nid),NR_MEMMAP_BOOT , +DIV_ROUND_UP (table_size,PAGE_SIZE ));return 0 ; }@@ -255,12 +257,15 @@ static void *__meminit alloc_page_ext(size_t size, int nid)void *addr =NULL ; addr =alloc_pages_exact_nid (nid, size, flags); -if (addr) { +if (addr)kmemleak_alloc (addr, size,1 , flags); -return addr; - } +else + addr =vzalloc_node (size, nid); - addr =vzalloc_node (size, nid); +if (addr) { +mod_node_page_state (NODE_DATA (nid),NR_MEMMAP , +DIV_ROUND_UP (size,PAGE_SIZE )); + }return addr; }@@ -303,18 +308,27 @@ static int __meminit init_section_page_ext(unsigned long pfn, int nid)static void free_page_ext (void *addr) { +size_t table_size; +struct page *page; +struct pglist_data *pgdat; + + table_size = page_ext_size *PAGES_PER_SECTION ; +if (is_vmalloc_addr (addr)) { + page =vmalloc_to_page (addr); + pgdat =page_pgdat (page);vfree (addr); }else { -struct page *page =virt_to_page (addr); -size_t table_size; - - table_size = page_ext_size *PAGES_PER_SECTION ; - + page =virt_to_page (addr); + pgdat =page_pgdat (page);BUG_ON (PageReserved (page));kmemleak_free (addr);free_pages_exact (addr, table_size); } + +mod_node_page_state (pgdat,NR_MEMMAP , +-1L * (DIV_ROUND_UP (table_size,PAGE_SIZE ))); + }static void __free_page_ext (unsigned long pfn)mm/sparse-vmemmap.c +8
-0@@ -469,5 +469,13 @@ struct page * __meminit __populate_section_memmap(unsigned long pfn,if (r <0 )return NULL ; +if (system_state ==SYSTEM_BOOTING ) { +mod_node_early_perpage_metadata (nid,DIV_ROUND_UP (end - start, +PAGE_SIZE )); + }else { +mod_node_page_state (NODE_DATA (nid),NR_MEMMAP , +DIV_ROUND_UP (end - start,PAGE_SIZE )); + } +return pfn_to_page (pfn); }mm/sparse.c +6
-1@@ -14,7 +14,7 @@#include <linux/swap.h> #include <linux/swapops.h> #include <linux/bootmem_info.h> - +#include <linux/vmstat.h> #include "internal.h" #include <asm/dma.h> @@ -465,6 +465,9 @@ static void __init sparse_buffer_init(unsigned long size, int nid)*/ sparsemap_buf =memmap_alloc (size,section_map_size (), addr, nid, true); sparsemap_buf_end = sparsemap_buf + size; +#ifndef CONFIG_SPARSEMEM_VMEMMAP +mod_node_early_perpage_metadata (nid,DIV_ROUND_UP (size,PAGE_SIZE )); +#endif }static void __init sparse_buffer_fini (void )@@ -641,6 +644,8 @@ static void depopulate_section_memmap(unsigned long pfn, unsigned long nr_pages,unsigned long start = (unsigned long )pfn_to_page (pfn);unsigned long end = start + nr_pages *sizeof (struct page ); +mod_node_page_state (page_pgdat (pfn_to_page (pfn)),NR_MEMMAP , +-1L * (DIV_ROUND_UP (end - start,PAGE_SIZE )));vmemmap_free (start, end, altmap); }static void free_map_bootmem (struct page *memmap)mm/vmstat.c +25
-2@@ -1252,7 +1252,8 @@ const char * const vmstat_text[] = {"pgdemote_kswapd" ,"pgdemote_direct" ,"pgdemote_khugepaged" , - +"nr_memmap" , +"nr_memmap_boot" ,/* enum writeback_stat_item counters */ "nr_dirty_threshold" , "nr_dirty_background_threshold",@@ -2279,4 +2280,27 @@ static int __init extfrag_debug_init(void) }module_init (extfrag_debug_init); +#endif + +/* +* Page metadata size (struct page and page_ext) in pages +*/ +static unsigned long early_perpage_metadata[MAX_NUMNODES ]__meminitdata ; + +void __meminit mod_node_early_perpage_metadata (int nid,long delta) +{ + early_perpage_metadata[nid] += delta; +} + +void __meminit store_early_perpage_metadata (void ) +{ +int nid; +struct pglist_data *pgdat; + +for_each_online_pgdat (pgdat) { + nid = pgdat->node_id; +mod_node_page_state (NODE_DATA (nid),NR_MEMMAP_BOOT , + early_perpage_metadata[nid]); + } +} --2.44.0.rc0.258.g7320e95886-goog
Quoted 10 lines · Wei Xu
Quoted 7 lines · Sourav Panda
Adds two new per-node fields, namely
nr_memmapandnr_memmap_boot, to/sys/devices/system/node/nodeN/vmstatand a global Memmap field to/proc/meminfo. This information can be used by users to see how much memory is being used by per-page metadata, which can vary depending on build configuration, machine architecture, and system use.
Quoted 4 lines
/proc/vmstatalso has the system-widenr_memmapandnr_memmap_boot. Given thatnr_memmapin/proc/vmstatprovides the same info (in different units) as Memmap in/proc/meminfo, it would be better to remove Memmap from/proc/meminfoto avoid duplication and confusion.
There are many items both in meminfo and in vmstat. Given that /proc/meminfo covers all kmem memory, it is beneficial to keep the kmem part of memmap in meminfo as another classification item.
Pasha
Quoted 54 lines · Sourav Panda
Adds two new per-node fields, namely
nr_memmapandnr_memmap_boot, to/sys/devices/system/node/nodeN/vmstatand a global Memmap field to/proc/meminfo. This information can be used by users to see how much memory is being used by per-page metadata, which can vary depending on build configuration, machine architecture, and system use.Per-page metadata is the amount of memory that Linux needs in order to manage memory at the page granularity. The majority of such memory is used by "struct page" and "
page_ext" data structures. In contrast to most other memory consumption statistics, per-page metadata might not be included in MemTotal. For example, MemTotal does not include memblock allocations but includes buddy allocations. In this patch, exported fieldnr_memmapin/sys/devices/system/node/nodeN/vmstatwould exclusively track buddy allocations whilenr_memmap_bootwould exclusively track memblock allocations. Furthermore, Memmap in/proc/meminfowould exclusively track buddy allocations allowing it to be compared against MemTotal.This memory depends on build configurations, machine architectures, and the way system is used:
Build configuration may include extra fields into "struct page", and enable / disable "
page_ext"
Machine architecture defines base page sizes. For example 4K x86, 8K SPARC, 64K ARM64 (optionally), etc. The per-page metadata overhead is smaller on machines with larger page sizes. System use can change per-page overhead by using vmemmap optimizations with hugetlb pages, and emulated pmem devdax pages. Also, boot parameters can determine whetherpage_extis needed to be allocated. This memory can be part of MemTotal or be outside MemTotal depending on whether the memory was hot-plugged, booted with, or hugetlb memory was returned back to the system.Utility for userspace:
Application Optimization: Depending on the kernel version and command line options, the kernel would relinquish a different number of pages (that contain struct pages) when a hugetlb page is reserved (e.g., 0, 6 or 7 for a 2MB hugepage). The userspace application would want to know the exact savings achieved through page metadata deallocation without dealing with the intricacies of the kernel.
Observability: Struct page overhead can only be calculated on-paper at boot time (e.g., 1.5% machine capacity). Beyond boot once hugepages are reserved or memory is hotplugged, the computation becomes complex. Per-page metrics will help explain part of the system memory overhead, which shall help guide memory optimizations and memory cgroup sizing.
Debugging: Tracking the changes or absolute value in struct pages can help detect anomalies as they can be correlated with other metrics in the machine (e.g., memtotal, number of huge pages, etc).
Quoted 7 lines
page_extoverheads: Some kernel features such aspage_ownerpage_table_checkthat usepage_extcan be optionally enabled via kernel parameters. Having the total per-page metadata information helps users precisely measure impact.Suggested-by Pasha Tatashin <[email protected]>Signed-off-by Sourav Panda <[email protected]>
Quoted 52 lines · Pasha Tatashin
Quoted 50 lines · Sourav Panda
Adds two new per-node fields, namely
nr_memmapandnr_memmap_boot, to/sys/devices/system/node/nodeN/vmstatand a global Memmap field to/proc/meminfo. This information can be used by users to see how much memory is being used by per-page metadata, which can vary depending on build configuration, machine architecture, and system use.Per-page metadata is the amount of memory that Linux needs in order to manage memory at the page granularity. The majority of such memory is used by "struct page" and "
page_ext" data structures. In contrast to most other memory consumption statistics, per-page metadata might not be included in MemTotal. For example, MemTotal does not include memblock allocations but includes buddy allocations. In this patch, exported fieldnr_memmapin/sys/devices/system/node/nodeN/vmstatwould exclusively track buddy allocations whilenr_memmap_bootwould exclusively track memblock allocations. Furthermore, Memmap in/proc/meminfowould exclusively track buddy allocations allowing it to be compared against MemTotal.This memory depends on build configurations, machine architectures, and the way system is used:
Build configuration may include extra fields into "struct page", and enable / disable "
page_ext"
Machine architecture defines base page sizes. For example 4K x86, 8K SPARC, 64K ARM64 (optionally), etc. The per-page metadata overhead is smaller on machines with larger page sizes. System use can change per-page overhead by using vmemmap optimizations with hugetlb pages, and emulated pmem devdax pages. Also, boot parameters can determine whetherpage_extis needed to be allocated. This memory can be part of MemTotal or be outside MemTotal depending on whether the memory was hot-plugged, booted with, or hugetlb memory was returned back to the system.Utility for userspace:
Application Optimization: Depending on the kernel version and command line options, the kernel would relinquish a different number of pages (that contain struct pages) when a hugetlb page is reserved (e.g., 0, 6 or 7 for a 2MB hugepage). The userspace application would want to know the exact savings achieved through page metadata deallocation without dealing with the intricacies of the kernel.
Observability: Struct page overhead can only be calculated on-paper at boot time (e.g., 1.5% machine capacity). Beyond boot once hugepages are reserved or memory is hotplugged, the computation becomes complex. Per-page metrics will help explain part of the system memory overhead, which shall help guide memory optimizations and memory cgroup sizing.
Quoted 8 lines
Quoted 8 lines
Debugging: Tracking the changes or absolute value in struct pages can help detect anomalies as they can be correlated with other metrics in the machine (e.g., memtotal, number of huge pages, etc).
page_extoverheads: Some kernel features such aspage_ownerpage_table_checkthat usepage_extcan be optionally enabled via kernel parameters. Having the total per-page metadata information helps users precisely measure impact.
Hi Andrew,
Can you please give this patch another look, does it require more reviews before you can take it in?
Thank you,
Pasha
Andrew Morton
maintainerQuoted 6 lines · On Tue, 20 Feb 2024 13:45:58 -0800 Sourav Panda <[email protected]> wrote:
Adds two new per-node fields, namely
nr_memmapandnr_memmap_boot, to/sys/devices/system/node/nodeN/vmstatand a global Memmap field to/proc/meminfo. This information can be used by users to see how much memory is being used by per-page metadata, which can vary depending on build configuration, machine architecture, and system use.
I yield to no man in my admiration of changelogging but boy, that's a lot of changelogging. Would it be possible to consolidate the [0/N] coverletter and the [1/N] changelog into a single thing please?
Quoted 4 lines
Documentation/filesystems/proc.rst | 3 +++ fs/proc/meminfo.c | 4 ++++ include/linux/mmzone.h | 4 ++++ include/linux/vmstat.h | 4 ++++
Quoted 8 lines
mm/hugetlb_vmemmap.c | 17 ++++++++++++---- mm/mm_init.c | 3 +++ mm/page_alloc.c | 1 + mm/page_ext.c | 32 +++++++++++++++++++++--------- mm/sparse-vmemmap.c | 8 ++++++++ mm/sparse.c | 7 ++++++- mm/vmstat.c | 26 +++++++++++++++++++++++- 11 files changed, 94 insertions(+), 15 deletions(-)
And yet we offer the users basically no documentation. The new sysfs file should be documented under Documentation/ABI somewhere and perhaps we could prepare some more expansive user-facing documentation elsewhere?
I'd like to hear others' views on the overall usefulness/utility of this change, please?
Quoted 26 lines · Andrew Morton
Quoted 6 lines · On Tue, 20 Feb 2024 13:45:58 -0800 Sourav Panda <[email protected]> wrote:
Adds two new per-node fields, namely
nr_memmapandnr_memmap_boot, to/sys/devices/system/node/nodeN/vmstatand a global Memmap field to/proc/meminfo. This information can be used by users to see how much memory is being used by per-page metadata, which can vary depending on build configuration, machine architecture, and system use.I yield to no man in my admiration of changelogging but boy, that's a lot of changelogging. Would it be possible to consolidate the [0/N] coverletter and the [1/N] changelog into a single thing please?
Quoted 4 lines
Documentation/filesystems/proc.rst | 3 +++ fs/proc/meminfo.c | 4 ++++ include/linux/mmzone.h | 4 ++++ include/linux/vmstat.h | 4 ++++Quoted 8 lines
mm/hugetlb_vmemmap.c | 17 ++++++++++++---- mm/mm_init.c | 3 +++ mm/page_alloc.c | 1 + mm/page_ext.c | 32 +++++++++++++++++++++--------- mm/sparse-vmemmap.c | 8 ++++++++ mm/sparse.c | 7 ++++++- mm/vmstat.c | 26 +++++++++++++++++++++++- 11 files changed, 94 insertions(+), 15 deletions(-)
Quoted 5 lines
And yet we offer the users basically no documentation. The new sysfs file should be documented under
Documentation/ABIsomewhere and perhaps we could prepare some more expansive user-facing documentation elsewhere?
Sourav, is it possible to refresh this series into a v10 on top of the latest upstream kernel with a single condensed changelog that details the current behavior, what extension this is adding, and how it is generally useful?
As noted here, the cover letter has great material that discusses the rationale for this change but would be lost if only this patch is merged. So typically the cover letter material gets concatenated into the changelog, but in this case there's a lot of overlap.
A single patch that includes a succinct changelog would be awesome.
And then the requested documentation in Documentation/ABI either included in the same patch or as a second patch in the series?
I don't think the resulting patch series will actually need a cover letter after that, it will be able to stand on its own.
Quoted 3 lines
I'd like to hear others' views on the overall usefulness/utility of this change, please?
Likely true for all hyperscalers, the immediate use case that this could be applied to is to track boot memory overhead and any regression over time (across kernel upgrades, firmware upgrades, etc) that may change the amount of total memory available. We'd want to subtract out the boot overhead that we know about (like struct page here) and then alert on any regression where we're losing memory from reboot to reboot for any reason.
This increased visibility into boot memory overhead allows us to create a mechanism to track changes over time when otherwise that attribution of that memory is not available.
Quoted 45 lines · David Rientjes
Quoted 1 line · Andrew Morton
On Tue, 20 Feb 2024 13:45:58 -0800 Sourav Panda <[email protected]>
Quoted 25 lines · wrote:
Quoted 7 lines
Adds two new per-node fields, namely
nr_memmapandnr_memmap_boot, to/sys/devices/system/node/nodeN/vmstatand a global Memmap field to/proc/meminfo. This information can be used by users to see how much memory is being used by per-page metadata, which can vary depending on build configuration, machine architecture, and system use.I yield to no man in my admiration of changelogging but boy, that's a lot of changelogging. Would it be possible to consolidate the [0/N] coverletter and the [1/N] changelog into a single thing please?
Quoted 4 lines
Documentation/filesystems/proc.rst | 3 +++ fs/proc/meminfo.c | 4 ++++ include/linux/mmzone.h | 4 ++++ include/linux/vmstat.h | 4 ++++Quoted 8 lines
mm/hugetlb_vmemmap.c | 17 ++++++++++++---- mm/mm_init.c | 3 +++ mm/page_alloc.c | 1 + mm/page_ext.c | 32 +++++++++++++++++++++--------- mm/sparse-vmemmap.c | 8 ++++++++ mm/sparse.c | 7 ++++++- mm/vmstat.c | 26 +++++++++++++++++++++++- 11 files changed, 94 insertions(+), 15 deletions(-)Quoted 5 lines
And yet we offer the users basically no documentation. The new sysfs file should be documented under
Documentation/ABIsomewhere and perhaps we could prepare some more expansive user-facing documentation elsewhere?Sourav, is it possible to refresh this series into a v10 on top of the latest upstream kernel with a single condensed changelog that details the current behavior, what extension this is adding, and how it is generally useful?
As noted here, the cover letter has great material that discusses the rationale for this change but would be lost if only this patch is merged. So typically the cover letter material gets concatenated into the changelog, but in this case there's a lot of overlap.
Quoted 8 lines
A single patch that includes a succinct changelog would be awesome.
And then the requested documentation in
Documentation/ABIeither included in the same patch or as a second patch in the series?I don't think the resulting patch series will actually need a cover letter after that, it will be able to stand on its own.
Thanks David, I will send v10 soon.
Quoted 16 lines
Quoted 4 lines
I'd like to hear others' views on the overall usefulness/utility of this change, please?
Likely true for all hyperscalers, the immediate use case that this could be applied to is to track boot memory overhead and any regression over time (across kernel upgrades, firmware upgrades, etc) that may change the amount of total memory available. We'd want to subtract out the boot overhead that we know about (like struct page here) and then alert on any regression where we're losing memory from reboot to reboot for any reason.
This increased visibility into boot memory overhead allows us to create a mechanism to track changes over time when otherwise that attribution of that memory is not available.
Quoted 13 lines
Quoted 4 lines
Documentation/filesystems/proc.rst | 3 +++ fs/proc/meminfo.c | 4 ++++ include/linux/mmzone.h | 4 ++++ include/linux/vmstat.h | 4 ++++Quoted 8 lines
mm/hugetlb_vmemmap.c | 17 ++++++++++++---- mm/mm_init.c | 3 +++ mm/page_alloc.c | 1 + mm/page_ext.c | 32 +++++++++++++++++++++--------- mm/sparse-vmemmap.c | 8 ++++++++ mm/sparse.c | 7 ++++++- mm/vmstat.c | 26 +++++++++++++++++++++++- 11 files changed, 94 insertions(+), 15 deletions(-)
Quoted 2 lines
And yet we offer the users basically no documentation. The new sysfs file should be documented under
Documentation/ABIsomewhere and
There are no new sysfs files in this change. The new Memmap field in /proc/meminfo is documented.
Quoted 5 lines
perhaps we could prepare some more expansive user-facing documentation elsewhere?
I'd like to hear others' views on the overall usefulness/utility of this change, please?
Sourav, could you please consolidate the cover letter and the patch into one email, sync it with the upstream kernel, and send the new version putting the necessary background information into the stat area in the patch.
Thanks,
Pasha