Skip to contentSkip to conversation

staging: vme_user: Fix misaligned closing comment */

PATCH In review Jonathan Bergh 2 participants 4 messages Mar 3, 2024 – Mar 5, 2024

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

PATCH 1/2 staging: vme_user: Fix misaligned closing comment */

This patch makes the following change:
* Ensures the trailing */ for comments is on the same line as the opening /*

---
 drivers/staging/vme_user/vme_tsi148.h | 6 ++----
 1 file changed, 2 insertions(+), 4 deletions(-)
drivers/staging/vme_user/vme_tsi148.h +2 -4
index 4dd224d0b86e..2a92497c5570 100644
@@ -691,8 +691,7 @@ static const int TSI148_GCSR_MBOX[4] = { TSI148_GCSR_MBOX0,
 
 #define TSI148_LCSR_VMCTRL_RMWEN       BIT(20)	/* RMW Enable */
 
-#define TSI148_LCSR_VMCTRL_ATO_M       (7 << 16)	/* Master Access Time-out Mask
-						 */
+#define TSI148_LCSR_VMCTRL_ATO_M       (7 << 16)	/* Master Access Time-out Mask */
 #define TSI148_LCSR_VMCTRL_ATO_32      (0 << 16)	/* 32 us */
 #define TSI148_LCSR_VMCTRL_ATO_128     BIT(16)	/* 128 us */
 #define TSI148_LCSR_VMCTRL_ATO_512     (2 << 16)	/* 512 us */
@@ -753,8 +752,7 @@ static const int TSI148_GCSR_MBOX[4] = { TSI148_GCSR_MBOX0,
 #define TSI148_LCSR_VCTRL_DLT_16384    (0xB << 24)	/* 16384 VCLKS */
 #define TSI148_LCSR_VCTRL_DLT_32768    (0xC << 24)	/* 32768 VCLKS */
 
-#define TSI148_LCSR_VCTRL_NERBB        BIT(20)	/* No Early Release of Bus Busy
-						 */
+#define TSI148_LCSR_VCTRL_NERBB        BIT(20)	/* No Early Release of Bus Busy */
 
 #define TSI148_LCSR_VCTRL_SRESET       BIT(17)	/* System Reset */
 #define TSI148_LCSR_VCTRL_LRESET       BIT(16)	/* Local Reset */
Signature · 1 line
2.40.1
#1 lore raw

PATCH 2/2 staging: vme_user: Add a newline after variable declarations

This patch makes the following change:
* Adds a newline after the variable declarations as per checkpatch's warning

---
 drivers/staging/vme_user/vme_tsi148.h | 1 +
 1 file changed, 1 insertion(+)
drivers/staging/vme_user/vme_tsi148.h +1 -0
index 2a92497c5570..a1b8288b101a 100644
@@ -34,6 +34,7 @@ struct tsi148_driver {
 	void __iomem *base;	/* Base Address of device registers */
 	wait_queue_head_t dma_queue[2];
 	wait_queue_head_t iack_queue;
+
 	void (*lm_callback[4])(void *);	/* Called in interrupt handler */
 	void *lm_data[4];
 	void *crcsr_kernel;
Signature · 1 line
2.40.1
maintainer
#2 lore raw

Re: [PATCH 2/2] staging: vme_user: Add a newline after variable declarations

Quoted 14 lines · Jonathan Bergh

This patch makes the following change:
* Adds a newline after the variable declarations as per checkpatch's warning

---
 drivers/staging/vme_user/vme_tsi148.h | 1 +
 1 file changed, 1 insertion(+)
drivers/staging/vme_user/vme_tsi148.h +0 -0
index 2a92497c5570..a1b8288b101a 100644

drivers/staging/vme_user/vme_tsi148.h struct tsi148_driver { · line 40

Quoted 7 lines
drivers/staging/vme_user/vme_tsi148.h +1 -0
@@ -34,6 +34,7 @@ struct tsi148_driver {
 	void __iomem *base;	/* Base Address of device registers */
 	wait_queue_head_t dma_queue[2];
 	wait_queue_head_t iack_queue;
+
 	void (*lm_callback[4])(void *);	/* Called in interrupt handler */
 	void *lm_data[4];
 	void *crcsr_kernel;

Please always look at the change to see if checkpatch is correct or not (hint, for this one, it is not.) Also see the archives for many people who have done the same thing in the past :)

thanks,

greg k-h

#3 lore raw

Re: [PATCH 2/2] staging: vme_user: Add a newline after variable declarations

Quoted 10 lines · Greg KH
Quoted 9 lines · Jonathan Bergh

This patch makes the following change:
* Adds a newline after the variable declarations as per checkpatch's warning

---
 drivers/staging/vme_user/vme_tsi148.h | 1 +
 1 file changed, 1 insertion(+)
Quoted 16 lines

drivers/staging/vme_user/vme_tsi148.h struct tsi148_driver { · line 40

Quoted 12 lines
drivers/staging/vme_user/vme_tsi148.h +1 -0
index 2a92497c5570..a1b8288b101a 100644
@@ -34,6 +34,7 @@ struct tsi148_driver {
 	void __iomem *base;	/* Base Address of device registers */
 	wait_queue_head_t dma_queue[2];
 	wait_queue_head_t iack_queue;
+
 	void (*lm_callback[4])(void *);	/* Called in interrupt handler */
 	void *lm_data[4];
 	void *crcsr_kernel;

Please always look at the change to see if checkpatch is correct or not (hint, for this one, it is not.) Also see the archives for many people who have done the same thing in the past :)

Got it, thanks for that.

Quoted 4 lines

thanks,

greg k-h