Skip to contentSkip to conversation

dev-manual: Convert to 'bmaptool-native'

PATCH Superseded Fabio Estevam 2 participants 3 messages Mar 5, 2024

v1 of 2 Superseded Latest is v2 →

lore
Share & tools
lore
#0 lore raw

PATCH 1/1 dev-manual: Convert to 'bmaptool-native'

Since commit 7a036b1a1ec7 ("bmaptool: now part of Yocto Project") 'bmap-tools-native' has been renamed as 'bmaptool-native'.

Adjust the references in the documentation accordingly.

---
 documentation/dev-manual/bmaptool.rst | 6 +++---
 documentation/dev-manual/wic.rst      | 2 +-
 2 files changed, 4 insertions(+), 4 deletions(-)
documentation/dev-manual/bmaptool.rst +3 -3
index 9add72cf3b80..3a2a61d8cdfe 100644
@@ -22,7 +22,7 @@ system image files much faster.
    -  If you are unable to install the ``bmap-tools`` package, you will
       need to build Bmaptool before using it. Use the following command::
 
-         $ bitbake bmap-tools-native
+         $ bitbake bmaptool-native
 
 Following, is an example that shows how to flash a Wic image. Realize
 that while this example uses a Wic image, you can use Bmaptool to flash
@@ -45,13 +45,13 @@ any type of image. Use these steps to flash an image using Bmaptool:
 
    -  If you have write access to the media, use this command form::
 
-         $ oe-run-native bmap-tools-native bmaptool copy build-directory/tmp/deploy/images/machine/image.wic /dev/sdX
+         $ oe-run-native bmaptool-native bmaptool copy build-directory/tmp/deploy/images/machine/image.wic /dev/sdX
 
    -  If you do not have write access to the media, set your permissions
       first and then use the same command form::
 
          $ sudo chmod 666 /dev/sdX
-         $ oe-run-native bmap-tools-native bmaptool copy build-directory/tmp/deploy/images/machine/image.wic /dev/sdX
+         $ oe-run-native bmaptool-native bmaptool copy build-directory/tmp/deploy/images/machine/image.wic /dev/sdX
 
 For help on the ``bmaptool`` command, use the following command::
 
documentation/dev-manual/wic.rst +1 -1
index 312f78c403a2..05e9cb381b31 100644
@@ -503,7 +503,7 @@ Continuing with the example, you can now write the image from the
 built your image, and boot from the media. You can write the image by using
 ``bmaptool`` or ``dd``::
 
-   $ oe-run-native bmap-tools-native bmaptool copy mkefidisk-201804191017-sda.direct /dev/sdX
+   $ oe-run-native bmaptool-native bmaptool copy mkefidisk-201804191017-sda.direct /dev/sdX
 
 or ::
 
Signature · 1 line
2.34.1
#1 lore raw

Thanks for doing this quickly.

Quoted 58 lines · Fabio Estevam

Since commit 7a036b1a1ec7 ("bmaptool: now part of Yocto Project") 'bmap-tools-native' has been renamed as 'bmaptool-native'.

Adjust the references in the documentation accordingly.

---
 documentation/dev-manual/bmaptool.rst | 6 +++---
 documentation/dev-manual/wic.rst      | 2 +-
 2 files changed, 4 insertions(+), 4 deletions(-)
documentation/dev-manual/bmaptool.rst +3 -3
index 9add72cf3b80..3a2a61d8cdfe 100644
@@ -22,7 +22,7 @@ system image files much faster.
    -  If you are unable to install the ``bmap-tools`` package, you will
       need to build Bmaptool before using it. Use the following command::
 
-         $ bitbake bmap-tools-native
+         $ bitbake bmaptool-native
 
 Following, is an example that shows how to flash a Wic image. Realize
 that while this example uses a Wic image, you can use Bmaptool to flash
@@ -45,13 +45,13 @@ any type of image. Use these steps to flash an image using Bmaptool:
 
    -  If you have write access to the media, use this command form::
 
-         $ oe-run-native bmap-tools-native bmaptool copy build-directory/tmp/deploy/images/machine/image.wic /dev/sdX
+         $ oe-run-native bmaptool-native bmaptool copy build-directory/tmp/deploy/images/machine/image.wic /dev/sdX
 
    -  If you do not have write access to the media, set your permissions
       first and then use the same command form::
 
          $ sudo chmod 666 /dev/sdX
-         $ oe-run-native bmap-tools-native bmaptool copy build-directory/tmp/deploy/images/machine/image.wic /dev/sdX
+         $ oe-run-native bmaptool-native bmaptool copy build-directory/tmp/deploy/images/machine/image.wic /dev/sdX
 
 For help on the ``bmaptool`` command, use the following command::
 
documentation/dev-manual/wic.rst +1 -2
index 312f78c403a2..05e9cb381b31 100644
@@ -503,7 +503,7 @@ Continuing with the example, you can now write the image from the
 built your image, and boot from the media. You can write the image by using
 ``bmaptool`` or ``dd``::
 
-   $ oe-run-native bmap-tools-native bmaptool copy mkefidisk-201804191017-sda.direct /dev/sdX
+   $ oe-run-native bmaptool-native bmaptool copy mkefidisk-201804191017-sda.direct /dev/sdX
 
 or ::
 
--

2.34.1

#2 lore raw

I wonder if it should go to docs ml too

Quoted 62 lines · Khem Raj

Thanks for doing this quickly.

Quoted 58 lines · Fabio Estevam

Since commit 7a036b1a1ec7 ("bmaptool: now part of Yocto Project") 'bmap-tools-native' has been renamed as 'bmaptool-native'.

Adjust the references in the documentation accordingly.

---
 documentation/dev-manual/bmaptool.rst | 6 +++---
 documentation/dev-manual/wic.rst      | 2 +-
 2 files changed, 4 insertions(+), 4 deletions(-)
documentation/dev-manual/bmaptool.rst +3 -3
index 9add72cf3b80..3a2a61d8cdfe 100644
@@ -22,7 +22,7 @@ system image files much faster.
    -  If you are unable to install the ``bmap-tools`` package, you will
       need to build Bmaptool before using it. Use the following command::
 
-         $ bitbake bmap-tools-native
+         $ bitbake bmaptool-native
 
 Following, is an example that shows how to flash a Wic image. Realize
 that while this example uses a Wic image, you can use Bmaptool to flash
@@ -45,13 +45,13 @@ any type of image. Use these steps to flash an image using Bmaptool:
 
    -  If you have write access to the media, use this command form::
 
-         $ oe-run-native bmap-tools-native bmaptool copy build-directory/tmp/deploy/images/machine/image.wic /dev/sdX
+         $ oe-run-native bmaptool-native bmaptool copy build-directory/tmp/deploy/images/machine/image.wic /dev/sdX
 
    -  If you do not have write access to the media, set your permissions
       first and then use the same command form::
 
          $ sudo chmod 666 /dev/sdX
-         $ oe-run-native bmap-tools-native bmaptool copy build-directory/tmp/deploy/images/machine/image.wic /dev/sdX
+         $ oe-run-native bmaptool-native bmaptool copy build-directory/tmp/deploy/images/machine/image.wic /dev/sdX
 
 For help on the ``bmaptool`` command, use the following command::
 
documentation/dev-manual/wic.rst +1 -2
index 312f78c403a2..05e9cb381b31 100644
@@ -503,7 +503,7 @@ Continuing with the example, you can now write the image from the
 built your image, and boot from the media. You can write the image by using
 ``bmaptool`` or ``dd``::
 
-   $ oe-run-native bmap-tools-native bmaptool copy mkefidisk-201804191017-sda.direct /dev/sdX
+   $ oe-run-native bmaptool-native bmaptool copy mkefidisk-201804191017-sda.direct /dev/sdX
 
 or ::
 
--

2.34.1