Skip to contentSkip to conversation

spi: Add more consistency to CS handle

PATCH In review Andy Shevchenko 2 participants 5 messages Mar 7, 2024 SPI

lore
Share & tools
lore
#0 lore raw

cover spi: Add more consistency to CS handle

There are the following issues with the current code:
- inconsistent use of 0xFF and -1 for invalid chip select pin
- inconsistent plain or BIT() use with a hard-to-understand comment
- wrong types used for last_cs_* fields

Fix all of these here.

Andy Shevchenko (3):
spi: Consistently use BIT for cs_index_mask
spi: Fix types of the last chip select storage variables
spi: Introduce SPI_INVALID_CS and is_valid_cs()

 drivers/spi/spi.c       | 74 +++++++++++++++++++----------------------
 include/linux/spi/spi.h | 12 +++----
 2 files changed, 40 insertions(+), 46 deletions(-)
Signature · 1 line
2.43.0.rc1.1.gbec44491f096
#1 lore raw

PATCH 1/3 spi: Consistently use BIT for cs_index_mask

Some of the parts related to the chip select are using BIT() macro the rest are using plain numbers. Unify all of them to use BIT().

While at it, make the (repetitive) comment clearer when assigning cs_index_mask during SPI target device enumeration.

---
 drivers/spi/spi.c | 35 +++++++++++------------------------
 1 file changed, 11 insertions(+), 24 deletions(-)
drivers/spi/spi.c +11 -24
index eb7e3ddf909b..4ab155f698c8 100644
@@ -1021,7 +1021,7 @@ static inline bool spi_is_last_cs(struct spi_device *spi)
 	bool last = false;
 
 	for (idx = 0; idx < SPI_CS_CNT_MAX; idx++) {
-		if ((spi->cs_index_mask >> idx) & 0x01) {
+		if (spi->cs_index_mask & BIT(idx)) {
 			if (spi->controller->last_cs[idx] == spi_get_chipselect(spi, idx))
 				last = true;
 		}
@@ -1072,8 +1072,7 @@ static void spi_set_cs(struct spi_device *spi, bool enable, bool force)
 			 * into account.
 			 */
 			for (idx = 0; idx < SPI_CS_CNT_MAX; idx++) {
-				if (((spi->cs_index_mask >> idx) & 0x01) &&
-				    spi_get_csgpiod(spi, idx)) {
+				if ((spi->cs_index_mask & BIT(idx)) && spi_get_csgpiod(spi, idx)) {
 					if (has_acpi_companion(&spi->dev))
 						gpiod_set_value_cansleep(spi_get_csgpiod(spi, idx),
 									 !enable);
@@ -2456,14 +2455,10 @@ static int of_spi_parse_dt(struct spi_controller *ctlr, struct spi_device *spi,
 		spi_set_chipselect(spi, idx, cs[idx]);
 
 	/*
-	 * spi->chip_select[i] gives the corresponding physical CS for logical CS i
-	 * logical CS number is represented by setting the ith bit in spi->cs_index_mask
-	 * So, for example, if spi->cs_index_mask = 0x01 then logical CS number is 0 and
-	 * spi->chip_select[0] will give the physical CS.
-	 * By default spi->chip_select[0] will hold the physical CS number so, set
-	 * spi->cs_index_mask as 0x01.
+	 * By default spi->chip_select[0] will hold the physical CS number,
+	 * so set bit 0 in spi->cs_index_mask.
 	 */
-	spi->cs_index_mask = 0x01;
+	spi->cs_index_mask = BIT(0);
 
 	/* Device speed */
 	if (!of_property_read_u32(nc, "spi-max-frequency", &value))
@@ -2587,14 +2582,10 @@ struct spi_device *spi_new_ancillary_device(struct spi_device *spi,
 	ancillary->max_speed_hz = spi->max_speed_hz;
 	ancillary->mode = spi->mode;
 	/*
-	 * spi->chip_select[i] gives the corresponding physical CS for logical CS i
-	 * logical CS number is represented by setting the ith bit in spi->cs_index_mask
-	 * So, for example, if spi->cs_index_mask = 0x01 then logical CS number is 0 and
-	 * spi->chip_select[0] will give the physical CS.
-	 * By default spi->chip_select[0] will hold the physical CS number so, set
-	 * spi->cs_index_mask as 0x01.
+	 * By default spi->chip_select[0] will hold the physical CS number,
+	 * so set bit 0 in spi->cs_index_mask.
 	 */
-	ancillary->cs_index_mask = 0x01;
+	ancillary->cs_index_mask = BIT(0);
 
 	WARN_ON(!mutex_is_locked(&ctlr->add_lock));
 
@@ -2841,14 +2832,10 @@ struct spi_device *acpi_spi_device_alloc(struct spi_controller *ctlr,
 	spi->irq		= lookup.irq;
 	spi->bits_per_word	= lookup.bits_per_word;
 	/*
-	 * spi->chip_select[i] gives the corresponding physical CS for logical CS i
-	 * logical CS number is represented by setting the ith bit in spi->cs_index_mask
-	 * So, for example, if spi->cs_index_mask = 0x01 then logical CS number is 0 and
-	 * spi->chip_select[0] will give the physical CS.
-	 * By default spi->chip_select[0] will hold the physical CS number so, set
-	 * spi->cs_index_mask as 0x01.
+	 * By default spi->chip_select[0] will hold the physical CS number,
+	 * so set bit 0 in spi->cs_index_mask.
 	 */
-	spi->cs_index_mask	= 0x01;
+	spi->cs_index_mask	= BIT(0);
 
 	return spi;
 }
Signature · 1 line
2.43.0.rc1.1.gbec44491f096
#2 lore raw

PATCH 2/3 spi: Fix types of the last chip select storage variables

In reply to Andy Shevchenko

First of all, last_cs_index_mask should be aligned with the original cs_index_mask, which is 16-bit (for now) wide. Use the same pattern for the last_cs_index_mask.

Second, last_cs can be negative and since 'char' is equal to 'unsigned char' in the kernel, it's incorrect, strictly speaking, to assign signed number to it. Use s8 type as it's done for *_native_cs ones.

With this change, regroup a bit the ordering to avoid too much memory space to be wasted due to paddings. Shuffle kernel documentation accordignly.

---
 include/linux/spi/spi.h | 12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)
include/linux/spi/spi.h +6 -6
index e400d454b3f0..c459809efee4 100644
@@ -448,9 +448,11 @@ extern struct spi_device *spi_new_ancillary_device(struct spi_device *spi, u8 ch
  *	the @cur_msg_completion. This flag is used to signal the context that
  *	is running spi_finalize_current_message() that it needs to complete()
  * @cur_msg_mapped: message has been mapped for DMA
+ * @fallback: fallback to PIO if DMA transfer return failure with
+ *	SPI_TRANS_FAIL_NO_START.
+ * @last_cs_mode_high: was (mode & SPI_CS_HIGH) true on the last call to set_cs.
  * @last_cs: the last chip_select that is recorded by set_cs, -1 on non chip
  *           selected
- * @last_cs_mode_high: was (mode & SPI_CS_HIGH) true on the last call to set_cs.
  * @xfer_completion: used by core transfer_one_message()
  * @busy: message pump is busy
  * @running: message pump is running
@@ -527,8 +529,6 @@ extern struct spi_device *spi_new_ancillary_device(struct spi_device *spi, u8 ch
  *	If the driver does not set this, the SPI core takes the snapshot as
  *	close to the driver hand-over as possible.
  * @irq_flags: Interrupt enable state during PTP system timestamping
- * @fallback: fallback to PIO if DMA transfer return failure with
- *	SPI_TRANS_FAIL_NO_START.
  * @queue_empty: signal green light for opportunistically skipping the queue
  *	for spi_sync transfers.
  * @must_async: disable all fast paths in the core
@@ -708,10 +708,10 @@ struct spi_controller {
 	bool				rt;
 	bool				auto_runtime_pm;
 	bool				cur_msg_mapped;
-	char				last_cs[SPI_CS_CNT_MAX];
-	char				last_cs_index_mask;
-	bool				last_cs_mode_high;
 	bool                            fallback;
+	bool				last_cs_mode_high;
+	s8				last_cs[SPI_CS_CNT_MAX];
+	u32				last_cs_index_mask : SPI_CS_CNT_MAX;
 	struct completion               xfer_completion;
 	size_t				max_dma_len;
 
Signature · 1 line
2.43.0.rc1.1.gbec44491f096
#3 lore raw

PATCH 3/3 spi: Introduce SPI_INVALID_CS and is_valid_cs()

In reply to Andy Shevchenko

The SPI core inconsistently uses the marker value for unused chip select pin. Define a constant (with appropriate type) and introduce is_valid_cs() helper function to avoid spreading this inconsistency in the future.

---
 drivers/spi/spi.c | 39 +++++++++++++++++++++++----------------
 1 file changed, 23 insertions(+), 16 deletions(-)
drivers/spi/spi.c +23 -16
index 4ab155f698c8..f18738ae95f8 100644
@@ -608,6 +608,22 @@ static void spi_dev_set_name(struct spi_device *spi)
 		     spi_get_chipselect(spi, 0));
 }
 
+/*
+ * Zero(0) is a valid physical CS value and can be located at any
+ * logical CS in the spi->chip_select[]. If all the physical CS
+ * are initialized to 0 then It would be difficult to differentiate
+ * between a valid physical CS 0 & an unused logical CS whose physical
+ * CS can be 0. As a solution to this issue initialize all the CS to -1.
+ * Now all the unused logical CS will have -1 physical CS value & can be
+ * ignored while performing physical CS validity checks.
+ */
+#define SPI_INVALID_CS		((s8)-1)
+
+static inline bool is_valid_cs(s8 chip_select)
+{
+	return chip_select != SPI_INVALID_CS;
+}
+
 static inline int spi_dev_check_cs(struct device *dev,
 				   struct spi_device *spi, u8 idx,
 				   struct spi_device *new_spi, u8 new_idx)
@@ -618,7 +634,7 @@ static inline int spi_dev_check_cs(struct device *dev,
 	cs = spi_get_chipselect(spi, idx);
 	for (idx_new = new_idx; idx_new < SPI_CS_CNT_MAX; idx_new++) {
 		cs_new = spi_get_chipselect(new_spi, idx_new);
-		if (cs != 0xFF && cs_new != 0xFF && cs == cs_new) {
+		if (is_valid_cs(cs) && is_valid_cs(cs_new) && cs == cs_new) {
 			dev_err(dev, "chipselect %u already in use\n", cs_new);
 			return -EBUSY;
 		}
@@ -658,7 +674,7 @@ static int __spi_add_device(struct spi_device *spi)
 	for (idx = 0; idx < SPI_CS_CNT_MAX; idx++) {
 		/* Chipselects are numbered 0..max; validate. */
 		cs = spi_get_chipselect(spi, idx);
-		if (cs != 0xFF && cs >= ctlr->num_chipselect) {
+		if (is_valid_cs(cs) && cs >= ctlr->num_chipselect) {
 			dev_err(dev, "cs%d >= max %d\n", spi_get_chipselect(spi, idx),
 				ctlr->num_chipselect);
 			return -EINVAL;
@@ -698,7 +714,7 @@ static int __spi_add_device(struct spi_device *spi)
 
 		for (idx = 0; idx < SPI_CS_CNT_MAX; idx++) {
 			cs = spi_get_chipselect(spi, idx);
-			if (cs != 0xFF)
+			if (is_valid_cs(cs))
 				spi_set_csgpiod(spi, idx, ctlr->cs_gpiods[cs]);
 		}
 	}
@@ -756,17 +772,8 @@ static void spi_set_all_cs_unused(struct spi_device *spi)
 {
 	u8 idx;
 
-	/*
-	 * Zero(0) is a valid physical CS value and can be located at any
-	 * logical CS in the spi->chip_select[]. If all the physical CS
-	 * are initialized to 0 then It would be difficult to differentiate
-	 * between a valid physical CS 0 & an unused logical CS whose physical
-	 * CS can be 0. As a solution to this issue initialize all the CS to 0xFF.
-	 * Now all the unused logical CS will have 0xFF physical CS value & can be
-	 * ignore while performing physical CS validity checks.
-	 */
 	for (idx = 0; idx < SPI_CS_CNT_MAX; idx++)
-		spi_set_chipselect(spi, idx, 0xFF);
+		spi_set_chipselect(spi, idx, SPI_INVALID_CS);
 }
 
 /**
@@ -1050,7 +1057,7 @@ static void spi_set_cs(struct spi_device *spi, bool enable, bool force)
 
 	spi->controller->last_cs_index_mask = spi->cs_index_mask;
 	for (idx = 0; idx < SPI_CS_CNT_MAX; idx++)
-		spi->controller->last_cs[idx] = enable ? spi_get_chipselect(spi, 0) : -1;
+		spi->controller->last_cs[idx] = enable ? spi_get_chipselect(spi, 0) : SPI_INVALID_CS;
 	spi->controller->last_cs_mode_high = spi->mode & SPI_CS_HIGH;
 
 	if (spi->mode & SPI_CS_HIGH)
@@ -3333,9 +3340,9 @@ int spi_register_controller(struct spi_controller *ctlr)
 		goto free_bus_id;
 	}
 
-	/* Setting last_cs to -1 means no chip selected */
+	/* Setting last_cs to SPI_INVALID_CS means no chip selected */
 	for (idx = 0; idx < SPI_CS_CNT_MAX; idx++)
-		ctlr->last_cs[idx] = -1;
+		ctlr->last_cs[idx] = SPI_INVALID_CS;
 
 	status = device_add(&ctlr->dev);
 	if (status < 0)
Signature · 1 line
2.43.0.rc1.1.gbec44491f096
maintainer
#4 lore raw
In reply to Andy Shevchenko
Quoted 8 lines · Andy Shevchenko

There are the following issues with the current code:
- inconsistent use of 0xFF and -1 for invalid chip select pin
- inconsistent plain or BIT() use with a hard-to-understand comment
- wrong types used for last_cs_* fields

Fix all of these here.

[...]

Applied to

https://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi.git for-next

Thanks!

[1/3] spi: Consistently use BIT for cs_index_mask

      commit: 1209c5566f9b244bd047478b7fc90318c9a310f0
[2/3] spi: Fix types of the last chip select storage variables
      commit: 14fe5a98fb24192f73639590d9d3cdb5640d48db
[3/3] spi: Introduce SPI_INVALID_CS and is_valid_cs()
      commit: be84be4a35fa99cca7e81e6dd21516a324cca413

All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent to Linus during the next merge window (or sooner if it is a bug fix), however if problems are discovered then the patch may be dropped or reverted.

You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed.

If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced.

Please add any relevant lists and maintainers to the CCs when replying to this mail.

Thanks,
Mark