arm64: dts: stratix10: socdk: drop unneeded flash address/size-cells
Subsystems (2)
PATCH 1/4 arm64: dts: stratix10: socdk: drop unneeded flash address/size-cells
Flash node uses single "partition" node to describe partitions, so remove deprecated address/size-cells properties to also fix dtc W=1 warnings:
socfpga_stratix10_socdk.dts:182.10-211.4: Warning (avoid_unnecessary_addr_size): /soc@0/spi@ff8d2000/flash@0: unnecessary #address-cells/#size-cells without "ranges" or child "reg" property
--- arch/arm64/boot/dts/altera/socfpga_stratix10_socdk.dts | 2 -- 1 file changed, 2 deletions(-)
arch/arm64/boot/dts/altera/socfpga_stratix10_socdk.dts +0 -2
@@ -180,8 +180,6 @@ rtc@68 { &qspi { status = "okay"; flash@0 { - #address-cells = <1>; - #size-cells = <1>; compatible = "micron,mt25qu02g", "jedec,spi-nor"; reg = <0>; spi-max-frequency = <100000000>;
Signature · 1 line
2.34.1
PATCH 2/4 arm64: dts: stratix10: socdk_nand: drop unneeded flash address/size-cells
Flash node uses single "partition" node to describe partitions, so remove deprecated address/size-cells properties to also fix dtc W=1 warnings:
socfpga_stratix10_socdk_nand.dts:171.10-200.4: Warning (avoid_unnecessary_addr_size): /soc@0/spi@ff8d2000/flash@0: unnecessary #address-cells/#size-cells without "ranges" or child "reg" property
--- arch/arm64/boot/dts/altera/socfpga_stratix10_socdk_nand.dts | 2 -- 1 file changed, 2 deletions(-)
arch/arm64/boot/dts/altera/socfpga_stratix10_socdk_nand.dts +0 -2
@@ -169,8 +169,6 @@ rtc@68 { &qspi { status = "okay"; flash@0 { - #address-cells = <1>; - #size-cells = <1>; compatible = "micron,mt25qu02g", "jedec,spi-nor"; reg = <0>; spi-max-frequency = <100000000>;
Signature · 1 line
2.34.1
PATCH 3/4 arm64: dts: agilex: socdk: drop unneeded flash address/size-cells
In reply to Krzysztof KozlowskiFlash node uses single "partition" node to describe partitions, so remove deprecated address/size-cells properties to also fix dtc W=1 warnings:
socfpga_agilex_socdk.dts:108.10-137.4: Warning (avoid_unnecessary_addr_size): /soc@0/spi@ff8d2000/flash@0: unnecessary #address-cells/#size-cells without "ranges" or child "reg" property
--- arch/arm64/boot/dts/intel/socfpga_agilex_socdk.dts | 2 -- 1 file changed, 2 deletions(-)
arch/arm64/boot/dts/intel/socfpga_agilex_socdk.dts +0 -2
@@ -106,8 +106,6 @@ &watchdog0 { &qspi { status = "okay"; flash@0 { - #address-cells = <1>; - #size-cells = <1>; compatible = "micron,mt25qu02g", "jedec,spi-nor"; reg = <0>; spi-max-frequency = <100000000>;
Signature · 1 line
2.34.1
PATCH 4/4 arm64: dts: n5x: socdk: drop unneeded flash address/size-cells
In reply to Krzysztof KozlowskiFlash node uses single "partition" node to describe partitions, so remove deprecated address/size-cells properties to also fix dtc W=1 warnings:
socfpga_n5x_socdk.dts:85.10-114.4: Warning (avoid_unnecessary_addr_size): /soc@0/spi@ff8d2000/flash@0: unnecessary #address-cells/#size-cells without "ranges" or child "reg" property
--- arch/arm64/boot/dts/intel/socfpga_n5x_socdk.dts | 2 -- 1 file changed, 2 deletions(-)
arch/arm64/boot/dts/intel/socfpga_n5x_socdk.dts +0 -2
@@ -83,8 +83,6 @@ &osc1 { &qspi { status = "okay"; flash@0 { - #address-cells = <1>; - #size-cells = <1>; compatible = "micron,mt25qu02g", "jedec,spi-nor"; reg = <0>; spi-max-frequency = <100000000>;
Signature · 1 line
2.34.1
Dinh Nguyen
maintainerQuoted 16 lines · Krzysztof Kozlowski
Flash node uses single "partition" node to describe partitions, so remove deprecated address/size-cells properties to also fix dtc W=1 warnings:
socfpga_stratix10_socdk.dts:182.10-211.4: Warning (
avoid_unnecessary_addr_size): /soc@0/spi@ff8d2000/flash@0: unnecessary #address-cells/#size-cells without "ranges" or child "reg" propertySigned-off-by Krzysztof Kozlowski <[email protected]>--- arch/arm64/boot/dts/altera/socfpga_stratix10_socdk.dts | 2 -- 1 file changed, 2 deletions(-)arch/arm64/boot/dts/altera/socfpga_stratix10_socdk.dts +0
-0
arch/arm64/boot/dts/altera/socfpga_stratix10_socdk.dts rtc@68 { · line 185
Quoted 8 lines
arch/arm64/boot/dts/altera/socfpga_stratix10_socdk.dts +0
-2@@ -180,8 +180,6 @@ rtc@68 { &qspi { status = "okay"; flash@0 { - #address-cells = <1>; - #size-cells = <1>; compatible = "micron,mt25qu02g", "jedec,spi-nor"; reg = <0>; spi-max-frequency = <100000000>;
All patches applied!
Thanks,
Dinh
Quoted 12 lines · Dinh Nguyen
Quoted 11 lines · Krzysztof Kozlowski
Flash node uses single "partition" node to describe partitions, so remove deprecated address/size-cells properties to also fix dtc W=1 warnings:
socfpga_stratix10_socdk.dts:182.10-211.4: Warning (
avoid_unnecessary_addr_size): /soc@0/spi@ff8d2000/flash@0: unnecessary #address-cells/#size-cells without "ranges" or child "reg" propertySigned-off-by Krzysztof Kozlowski <[email protected]>--- arch/arm64/boot/dts/altera/socfpga_stratix10_socdk.dts | 2 -- 1 file changed, 2 deletions(-)
Quoted 15 lines
arch/arm64/boot/dts/altera/socfpga_stratix10_socdk.dts rtc@68 { · line 185
Quoted 13 lines
arch/arm64/boot/dts/altera/socfpga_stratix10_socdk.dts +0
-2@@ -180,8 +180,6 @@ rtc@68 { &qspi { status = "okay"; flash@0 { - #address-cells = <1>; - #size-cells = <1>; compatible = "micron,mt25qu02g", "jedec,spi-nor"; reg = <0>; spi-max-frequency = <100000000>;All patches applied!
This was two months ago, so it should reach v6.10-rc1. It is neither in v6.10-rc1 nor in linux-next.
Are you sure you applied this?
Are your trees in linux-next?
Best regards,
Krzysztof
Dinh Nguyen
maintainerQuoted 29 lines · Krzysztof Kozlowski
Quoted 12 lines · Dinh Nguyen
Quoted 11 lines · Krzysztof Kozlowski
Flash node uses single "partition" node to describe partitions, so remove deprecated address/size-cells properties to also fix dtc W=1 warnings:
socfpga_stratix10_socdk.dts:182.10-211.4: Warning (avoid_unnecessary_addr_size): /soc@0/spi@ff8d2000/flash@0: unnecessary #address-cells/#size-cells without "ranges" or child "reg" propertySigned-off-by Krzysztof Kozlowski <[email protected]>--- arch/arm64/boot/dts/altera/socfpga_stratix10_socdk.dts | 2 -- 1 file changed, 2 deletions(-)Quoted 15 lines
arch/arm64/boot/dts/altera/socfpga_stratix10_socdk.dts rtc@68 { · line 185
Quoted 13 lines
arch/arm64/boot/dts/altera/socfpga_stratix10_socdk.dts +0
-2@@ -180,8 +180,6 @@ rtc@68 { &qspi { status = "okay"; flash@0 { - #address-cells = <1>; - #size-cells = <1>; compatible = "micron,mt25qu02g", "jedec,spi-nor"; reg = <0>; spi-max-frequency = <100000000>;All patches applied!
Quoted 6 lines
This was two months ago, so it should reach v6.10-rc1. It is neither in v6.10-rc1 nor in linux-next.
Are you sure you applied this?
Are your trees in linux-next?
I apologize, I miss the PR for the v6.10. I have it queue for v6.11.
Dinh