Skip to contentSkip to conversation

target/riscv: fix instructions count handling in icount mode

PATCH Applied Clément Léger 3 participants 4 messages Apr 11, 2024 – May 27, 2024 RISC-V

v1 of 2 Applied Latest is v2 →

lore
Share & tools
lore
#0 lore raw

PATCH 1/1 target/riscv: fix instructions count handling in icount mode

When icount is enabled, rather than returning the virtual CPU time, we should return the instruction count itself. Add an instructions bool parameter to get_ticks() to correctly return icount_get_raw() when icount_enabled() == 1 and instruction count is queried. This will modify the existing behavior which was returning an instructions count close to the number of cycles (CPI ~= 1).

---
 target/riscv/csr.c | 29 ++++++++++++++++-------------
 1 file changed, 16 insertions(+), 13 deletions(-)
target/riscv/csr.c +16 -13
index 726096444f..5f1dcee102 100644
@@ -762,14 +762,17 @@ static RISCVException write_vcsr(CPURISCVState *env, int csrno,
 }
 
 /* User Timers and Counters */
-static target_ulong get_ticks(bool shift)
+static target_ulong get_ticks(bool shift, bool instructions)
 {
     int64_t val;
     target_ulong result;
 
 #if !defined(CONFIG_USER_ONLY)
     if (icount_enabled()) {
-        val = icount_get();
+        if (instructions)
+            val = icount_get_raw();
+        else
+            val = icount_get();
     } else {
         val = cpu_get_host_ticks();
     }
@@ -804,14 +807,14 @@ static RISCVException read_timeh(CPURISCVState *env, int csrno,
 static RISCVException read_hpmcounter(CPURISCVState *env, int csrno,
                                       target_ulong *val)
 {
-    *val = get_ticks(false);
+    *val = get_ticks(false, (csrno == CSR_INSTRET));
     return RISCV_EXCP_NONE;
 }
 
 static RISCVException read_hpmcounterh(CPURISCVState *env, int csrno,
                                        target_ulong *val)
 {
-    *val = get_ticks(true);
+    *val = get_ticks(true, (csrno == CSR_INSTRETH));
     return RISCV_EXCP_NONE;
 }
 
@@ -875,11 +878,11 @@ static RISCVException write_mhpmcounter(CPURISCVState *env, int csrno,
     int ctr_idx = csrno - CSR_MCYCLE;
     PMUCTRState *counter = &env->pmu_ctrs[ctr_idx];
     uint64_t mhpmctr_val = val;
+    bool instr = riscv_pmu_ctr_monitor_instructions(env, ctr_idx);
 
     counter->mhpmcounter_val = val;
-    if (riscv_pmu_ctr_monitor_cycles(env, ctr_idx) ||
-        riscv_pmu_ctr_monitor_instructions(env, ctr_idx)) {
-        counter->mhpmcounter_prev = get_ticks(false);
+    if (riscv_pmu_ctr_monitor_cycles(env, ctr_idx) || instr) {
+        counter->mhpmcounter_prev = get_ticks(false, instr);
         if (ctr_idx > 2) {
             if (riscv_cpu_mxl(env) == MXL_RV32) {
                 mhpmctr_val = mhpmctr_val |
@@ -902,12 +905,12 @@ static RISCVException write_mhpmcounterh(CPURISCVState *env, int csrno,
     PMUCTRState *counter = &env->pmu_ctrs[ctr_idx];
     uint64_t mhpmctr_val = counter->mhpmcounter_val;
     uint64_t mhpmctrh_val = val;
+    bool instr = riscv_pmu_ctr_monitor_instructions(env, ctr_idx);
 
     counter->mhpmcounterh_val = val;
     mhpmctr_val = mhpmctr_val | (mhpmctrh_val << 32);
-    if (riscv_pmu_ctr_monitor_cycles(env, ctr_idx) ||
-        riscv_pmu_ctr_monitor_instructions(env, ctr_idx)) {
-        counter->mhpmcounterh_prev = get_ticks(true);
+    if (riscv_pmu_ctr_monitor_cycles(env, ctr_idx) || instr) {
+        counter->mhpmcounterh_prev = get_ticks(true, instr);
         if (ctr_idx > 2) {
             riscv_pmu_setup_timer(env, mhpmctr_val, ctr_idx);
         }
@@ -926,6 +929,7 @@ static RISCVException riscv_pmu_read_ctr(CPURISCVState *env, target_ulong *val,
                                          counter->mhpmcounter_prev;
     target_ulong ctr_val = upper_half ? counter->mhpmcounterh_val :
                                         counter->mhpmcounter_val;
+    bool instr = riscv_pmu_ctr_monitor_instructions(env, ctr_idx);
 
     if (get_field(env->mcountinhibit, BIT(ctr_idx))) {
         /*
@@ -946,9 +950,8 @@ static RISCVException riscv_pmu_read_ctr(CPURISCVState *env, target_ulong *val,
      * The kernel computes the perf delta by subtracting the current value from
      * the value it initialized previously (ctr_val).
      */
-    if (riscv_pmu_ctr_monitor_cycles(env, ctr_idx) ||
-        riscv_pmu_ctr_monitor_instructions(env, ctr_idx)) {
-        *val = get_ticks(upper_half) - ctr_prev + ctr_val;
+    if (riscv_pmu_ctr_monitor_cycles(env, ctr_idx) || instr) {
+        *val = get_ticks(upper_half, instr) - ctr_prev + ctr_val;
     } else {
         *val = ctr_val;
     }
Signature · 1 line
2.43.0
Reviewed-by on v1 1/1
#1 lore raw
Quoted 107 lines · Clément Léger

When icount is enabled, rather than returning the virtual CPU time, we should return the instruction count itself. Add an instructions bool parameter to get_ticks() to correctly return icount_get_raw() when icount_enabled() == 1 and instruction count is queried. This will modify the existing behavior which was returning an instructions count close to the number of cycles (CPI ~= 1).

---
 target/riscv/csr.c | 29 ++++++++++++++++-------------
 1 file changed, 16 insertions(+), 13 deletions(-)
target/riscv/csr.c +16 -14
index 726096444f..5f1dcee102 100644
@@ -762,14 +762,17 @@ static RISCVException write_vcsr(CPURISCVState *env, int csrno,
 }
 
 /* User Timers and Counters */
-static target_ulong get_ticks(bool shift)
+static target_ulong get_ticks(bool shift, bool instructions)
 {
     int64_t val;
     target_ulong result;
 
 #if !defined(CONFIG_USER_ONLY)
     if (icount_enabled()) {
-        val = icount_get();
+        if (instructions)
+            val = icount_get_raw();
+        else
+            val = icount_get();
     } else {
         val = cpu_get_host_ticks();
     }
@@ -804,14 +807,14 @@ static RISCVException read_timeh(CPURISCVState *env, int csrno,
 static RISCVException read_hpmcounter(CPURISCVState *env, int csrno,
                                       target_ulong *val)
 {
-    *val = get_ticks(false);
+    *val = get_ticks(false, (csrno == CSR_INSTRET));
     return RISCV_EXCP_NONE;
 }
 
 static RISCVException read_hpmcounterh(CPURISCVState *env, int csrno,
                                        target_ulong *val)
 {
-    *val = get_ticks(true);
+    *val = get_ticks(true, (csrno == CSR_INSTRETH));
     return RISCV_EXCP_NONE;
 }
 
@@ -875,11 +878,11 @@ static RISCVException write_mhpmcounter(CPURISCVState *env, int csrno,
     int ctr_idx = csrno - CSR_MCYCLE;
     PMUCTRState *counter = &env->pmu_ctrs[ctr_idx];
     uint64_t mhpmctr_val = val;
+    bool instr = riscv_pmu_ctr_monitor_instructions(env, ctr_idx);
 
     counter->mhpmcounter_val = val;
-    if (riscv_pmu_ctr_monitor_cycles(env, ctr_idx) ||
-        riscv_pmu_ctr_monitor_instructions(env, ctr_idx)) {
-        counter->mhpmcounter_prev = get_ticks(false);
+    if (riscv_pmu_ctr_monitor_cycles(env, ctr_idx) || instr) {
+        counter->mhpmcounter_prev = get_ticks(false, instr);
         if (ctr_idx > 2) {
             if (riscv_cpu_mxl(env) == MXL_RV32) {
                 mhpmctr_val = mhpmctr_val |
@@ -902,12 +905,12 @@ static RISCVException write_mhpmcounterh(CPURISCVState *env, int csrno,
     PMUCTRState *counter = &env->pmu_ctrs[ctr_idx];
     uint64_t mhpmctr_val = counter->mhpmcounter_val;
     uint64_t mhpmctrh_val = val;
+    bool instr = riscv_pmu_ctr_monitor_instructions(env, ctr_idx);
 
     counter->mhpmcounterh_val = val;
     mhpmctr_val = mhpmctr_val | (mhpmctrh_val << 32);
-    if (riscv_pmu_ctr_monitor_cycles(env, ctr_idx) ||
-        riscv_pmu_ctr_monitor_instructions(env, ctr_idx)) {
-        counter->mhpmcounterh_prev = get_ticks(true);
+    if (riscv_pmu_ctr_monitor_cycles(env, ctr_idx) || instr) {
+        counter->mhpmcounterh_prev = get_ticks(true, instr);
         if (ctr_idx > 2) {
             riscv_pmu_setup_timer(env, mhpmctr_val, ctr_idx);
         }
@@ -926,6 +929,7 @@ static RISCVException riscv_pmu_read_ctr(CPURISCVState *env, target_ulong *val,
                                          counter->mhpmcounter_prev;
     target_ulong ctr_val = upper_half ? counter->mhpmcounterh_val :
                                         counter->mhpmcounter_val;
+    bool instr = riscv_pmu_ctr_monitor_instructions(env, ctr_idx);
 
     if (get_field(env->mcountinhibit, BIT(ctr_idx))) {
         /*
@@ -946,9 +950,8 @@ static RISCVException riscv_pmu_read_ctr(CPURISCVState *env, target_ulong *val,
      * The kernel computes the perf delta by subtracting the current value from
      * the value it initialized previously (ctr_val).
      */
-    if (riscv_pmu_ctr_monitor_cycles(env, ctr_idx) ||
-        riscv_pmu_ctr_monitor_instructions(env, ctr_idx)) {
-        *val = get_ticks(upper_half) - ctr_prev + ctr_val;
+    if (riscv_pmu_ctr_monitor_cycles(env, ctr_idx) || instr) {
+        *val = get_ticks(upper_half, instr) - ctr_prev + ctr_val;
     } else {
         *val = ctr_val;
     }
--
Quoted 2 lines

2.43.0

#2 lore raw
In reply to Clément Léger
Quoted 9 lines · Clément Léger

When icount is enabled, rather than returning the virtual CPU time, we should return the instruction count itself. Add an instructions bool parameter to get_ticks() to correctly return icount_get_raw() when icount_enabled() == 1 and instruction count is queried. This will modify the existing behavior which was returning an instructions count close to the number of cycles (CPI ~= 1).

Thanks!

Applied to riscv-to-apply.next

Alistair

Quoted 101 lines
---
 target/riscv/csr.c | 29 ++++++++++++++++-------------
 1 file changed, 16 insertions(+), 13 deletions(-)
target/riscv/csr.c +16 -14
index 726096444f..5f1dcee102 100644
@@ -762,14 +762,17 @@ static RISCVException write_vcsr(CPURISCVState *env, int csrno,
 }
 
 /* User Timers and Counters */
-static target_ulong get_ticks(bool shift)
+static target_ulong get_ticks(bool shift, bool instructions)
 {
     int64_t val;
     target_ulong result;
 
 #if !defined(CONFIG_USER_ONLY)
     if (icount_enabled()) {
-        val = icount_get();
+        if (instructions)
+            val = icount_get_raw();
+        else
+            val = icount_get();
     } else {
         val = cpu_get_host_ticks();
     }
@@ -804,14 +807,14 @@ static RISCVException read_timeh(CPURISCVState *env, int csrno,
 static RISCVException read_hpmcounter(CPURISCVState *env, int csrno,
                                       target_ulong *val)
 {
-    *val = get_ticks(false);
+    *val = get_ticks(false, (csrno == CSR_INSTRET));
     return RISCV_EXCP_NONE;
 }
 
 static RISCVException read_hpmcounterh(CPURISCVState *env, int csrno,
                                        target_ulong *val)
 {
-    *val = get_ticks(true);
+    *val = get_ticks(true, (csrno == CSR_INSTRETH));
     return RISCV_EXCP_NONE;
 }
 
@@ -875,11 +878,11 @@ static RISCVException write_mhpmcounter(CPURISCVState *env, int csrno,
     int ctr_idx = csrno - CSR_MCYCLE;
     PMUCTRState *counter = &env->pmu_ctrs[ctr_idx];
     uint64_t mhpmctr_val = val;
+    bool instr = riscv_pmu_ctr_monitor_instructions(env, ctr_idx);
 
     counter->mhpmcounter_val = val;
-    if (riscv_pmu_ctr_monitor_cycles(env, ctr_idx) ||
-        riscv_pmu_ctr_monitor_instructions(env, ctr_idx)) {
-        counter->mhpmcounter_prev = get_ticks(false);
+    if (riscv_pmu_ctr_monitor_cycles(env, ctr_idx) || instr) {
+        counter->mhpmcounter_prev = get_ticks(false, instr);
         if (ctr_idx > 2) {
             if (riscv_cpu_mxl(env) == MXL_RV32) {
                 mhpmctr_val = mhpmctr_val |
@@ -902,12 +905,12 @@ static RISCVException write_mhpmcounterh(CPURISCVState *env, int csrno,
     PMUCTRState *counter = &env->pmu_ctrs[ctr_idx];
     uint64_t mhpmctr_val = counter->mhpmcounter_val;
     uint64_t mhpmctrh_val = val;
+    bool instr = riscv_pmu_ctr_monitor_instructions(env, ctr_idx);
 
     counter->mhpmcounterh_val = val;
     mhpmctr_val = mhpmctr_val | (mhpmctrh_val << 32);
-    if (riscv_pmu_ctr_monitor_cycles(env, ctr_idx) ||
-        riscv_pmu_ctr_monitor_instructions(env, ctr_idx)) {
-        counter->mhpmcounterh_prev = get_ticks(true);
+    if (riscv_pmu_ctr_monitor_cycles(env, ctr_idx) || instr) {
+        counter->mhpmcounterh_prev = get_ticks(true, instr);
         if (ctr_idx > 2) {
             riscv_pmu_setup_timer(env, mhpmctr_val, ctr_idx);
         }
@@ -926,6 +929,7 @@ static RISCVException riscv_pmu_read_ctr(CPURISCVState *env, target_ulong *val,
                                          counter->mhpmcounter_prev;
     target_ulong ctr_val = upper_half ? counter->mhpmcounterh_val :
                                         counter->mhpmcounter_val;
+    bool instr = riscv_pmu_ctr_monitor_instructions(env, ctr_idx);
 
     if (get_field(env->mcountinhibit, BIT(ctr_idx))) {
         /*
@@ -946,9 +950,8 @@ static RISCVException riscv_pmu_read_ctr(CPURISCVState *env, target_ulong *val,
      * The kernel computes the perf delta by subtracting the current value from
      * the value it initialized previously (ctr_val).
      */
-    if (riscv_pmu_ctr_monitor_cycles(env, ctr_idx) ||
-        riscv_pmu_ctr_monitor_instructions(env, ctr_idx)) {
-        *val = get_ticks(upper_half) - ctr_prev + ctr_val;
+    if (riscv_pmu_ctr_monitor_cycles(env, ctr_idx) || instr) {
+        *val = get_ticks(upper_half, instr) - ctr_prev + ctr_val;
     } else {
         *val = ctr_val;
     }
--

2.43.0

#3 lore raw
In reply to Clément Léger
Quoted 9 lines · Clément Léger

When icount is enabled, rather than returning the virtual CPU time, we should return the instruction count itself. Add an instructions bool parameter to get_ticks() to correctly return icount_get_raw() when icount_enabled() == 1 and instruction count is queried. This will modify the existing behavior which was returning an instructions count close to the number of cycles (CPI ~= 1).

This patch fails checkpatch

Have a look at https://www.qemu.org/docs/master/devel/submitting-a-patch.html#id32
for details on what tests to run before submitting patches

Alistair

Quoted 101 lines
---
 target/riscv/csr.c | 29 ++++++++++++++++-------------
 1 file changed, 16 insertions(+), 13 deletions(-)
target/riscv/csr.c +16 -14
index 726096444f..5f1dcee102 100644
@@ -762,14 +762,17 @@ static RISCVException write_vcsr(CPURISCVState *env, int csrno,
 }
 
 /* User Timers and Counters */
-static target_ulong get_ticks(bool shift)
+static target_ulong get_ticks(bool shift, bool instructions)
 {
     int64_t val;
     target_ulong result;
 
 #if !defined(CONFIG_USER_ONLY)
     if (icount_enabled()) {
-        val = icount_get();
+        if (instructions)
+            val = icount_get_raw();
+        else
+            val = icount_get();
     } else {
         val = cpu_get_host_ticks();
     }
@@ -804,14 +807,14 @@ static RISCVException read_timeh(CPURISCVState *env, int csrno,
 static RISCVException read_hpmcounter(CPURISCVState *env, int csrno,
                                       target_ulong *val)
 {
-    *val = get_ticks(false);
+    *val = get_ticks(false, (csrno == CSR_INSTRET));
     return RISCV_EXCP_NONE;
 }
 
 static RISCVException read_hpmcounterh(CPURISCVState *env, int csrno,
                                        target_ulong *val)
 {
-    *val = get_ticks(true);
+    *val = get_ticks(true, (csrno == CSR_INSTRETH));
     return RISCV_EXCP_NONE;
 }
 
@@ -875,11 +878,11 @@ static RISCVException write_mhpmcounter(CPURISCVState *env, int csrno,
     int ctr_idx = csrno - CSR_MCYCLE;
     PMUCTRState *counter = &env->pmu_ctrs[ctr_idx];
     uint64_t mhpmctr_val = val;
+    bool instr = riscv_pmu_ctr_monitor_instructions(env, ctr_idx);
 
     counter->mhpmcounter_val = val;
-    if (riscv_pmu_ctr_monitor_cycles(env, ctr_idx) ||
-        riscv_pmu_ctr_monitor_instructions(env, ctr_idx)) {
-        counter->mhpmcounter_prev = get_ticks(false);
+    if (riscv_pmu_ctr_monitor_cycles(env, ctr_idx) || instr) {
+        counter->mhpmcounter_prev = get_ticks(false, instr);
         if (ctr_idx > 2) {
             if (riscv_cpu_mxl(env) == MXL_RV32) {
                 mhpmctr_val = mhpmctr_val |
@@ -902,12 +905,12 @@ static RISCVException write_mhpmcounterh(CPURISCVState *env, int csrno,
     PMUCTRState *counter = &env->pmu_ctrs[ctr_idx];
     uint64_t mhpmctr_val = counter->mhpmcounter_val;
     uint64_t mhpmctrh_val = val;
+    bool instr = riscv_pmu_ctr_monitor_instructions(env, ctr_idx);
 
     counter->mhpmcounterh_val = val;
     mhpmctr_val = mhpmctr_val | (mhpmctrh_val << 32);
-    if (riscv_pmu_ctr_monitor_cycles(env, ctr_idx) ||
-        riscv_pmu_ctr_monitor_instructions(env, ctr_idx)) {
-        counter->mhpmcounterh_prev = get_ticks(true);
+    if (riscv_pmu_ctr_monitor_cycles(env, ctr_idx) || instr) {
+        counter->mhpmcounterh_prev = get_ticks(true, instr);
         if (ctr_idx > 2) {
             riscv_pmu_setup_timer(env, mhpmctr_val, ctr_idx);
         }
@@ -926,6 +929,7 @@ static RISCVException riscv_pmu_read_ctr(CPURISCVState *env, target_ulong *val,
                                          counter->mhpmcounter_prev;
     target_ulong ctr_val = upper_half ? counter->mhpmcounterh_val :
                                         counter->mhpmcounter_val;
+    bool instr = riscv_pmu_ctr_monitor_instructions(env, ctr_idx);
 
     if (get_field(env->mcountinhibit, BIT(ctr_idx))) {
         /*
@@ -946,9 +950,8 @@ static RISCVException riscv_pmu_read_ctr(CPURISCVState *env, target_ulong *val,
      * The kernel computes the perf delta by subtracting the current value from
      * the value it initialized previously (ctr_val).
      */
-    if (riscv_pmu_ctr_monitor_cycles(env, ctr_idx) ||
-        riscv_pmu_ctr_monitor_instructions(env, ctr_idx)) {
-        *val = get_ticks(upper_half) - ctr_prev + ctr_val;
+    if (riscv_pmu_ctr_monitor_cycles(env, ctr_idx) || instr) {
+        *val = get_ticks(upper_half, instr) - ctr_prev + ctr_val;
     } else {
         *val = ctr_val;
     }
--

2.43.0