ice: support devlink subfunction
Subsystems (3)
v3 cover ice: support devlink subfunction
Hi,
This is second patchset split from subfunction patchset [1]. Important changes from previous version:
* remove unnecessary checks for devlink port type
* link correct devlink port to subfunction netdev
Follow up patchset with subfunction port representor will be the last patchset for subfunction implementation in ice. It is a little unpleasant to split it like that, because devlink port should be linked with port representor netdev. In this patchset use devlink port without linking it. It will be done correctly in the follow up when subfunction port representor is available.
Currently ice driver does not allow creating more than one networking device per physical function. The only way to have more hardware backed netdev is to use SR-IOV.
Following patchset adds support for devlink port API. For each new pcisf type port, driver allocates new VSI, configures all resources needed, including dynamically MSIX vectors, program rules and registers new netdev.
This series supports only one Tx/Rx queue pair per subfunction.
Example commands:
devlink port add pci/0000:31:00.1 flavour pcisf pfnum 1 sfnum 1000 devlink port function set pci/0000:31:00.1/1 hw_addr 00:00:00:00:03:14 devlink port function set pci/0000:31:00.1/1 state active devlink port function del pci/0000:31:00.1/1
v2 --> v3: [3]
* fix building issue between the patches; allocating devlink for subfunction need to include base subfunction header
* fix kdoc issues
v1 --> v2: [2]
* use correct parameters in ice_devlink_alloc() thanks to Mateusz
[1] https://lore.kernel.org/netdev/[email protected]/
[2] https://lore.kernel.org/netdev/[email protected]/
[3] https://lore.kernel.org/netdev/[email protected]/
*** BLURB HERE ***
Piotr Raczynski (7):
ice: add new VSI type for subfunctions
ice: export ice ndo_ops functions
ice: add basic devlink subfunctions support
ice: allocate devlink for subfunction
ice: base subfunction aux driver
ice: implement netdev for subfunction
ice: allow to activate and deactivate subfunction
drivers/net/ethernet/intel/ice/Makefile | 1 + .../net/ethernet/intel/ice/devlink/devlink.c | 50 +- .../net/ethernet/intel/ice/devlink/devlink.h | 1 + .../ethernet/intel/ice/devlink/devlink_port.c | 512 ++++++++++++++++++ .../ethernet/intel/ice/devlink/devlink_port.h | 38 ++ drivers/net/ethernet/intel/ice/ice.h | 12 + drivers/net/ethernet/intel/ice/ice_base.c | 5 +- drivers/net/ethernet/intel/ice/ice_dcb_lib.c | 1 + drivers/net/ethernet/intel/ice/ice_lib.c | 52 +- drivers/net/ethernet/intel/ice/ice_lib.h | 3 + drivers/net/ethernet/intel/ice/ice_main.c | 66 ++- drivers/net/ethernet/intel/ice/ice_sf_eth.c | 317 +++++++++++ drivers/net/ethernet/intel/ice/ice_sf_eth.h | 33 ++ drivers/net/ethernet/intel/ice/ice_type.h | 1 + drivers/net/ethernet/intel/ice/ice_xsk.c | 2 +- 15 files changed, 1047 insertions(+), 47 deletions(-) create mode 100644 drivers/net/ethernet/intel/ice/ice_sf_eth.c create mode 100644 drivers/net/ethernet/intel/ice/ice_sf_eth.h
Signature · 1 line
2.42.0
PATCH v3 1/7 ice: add new VSI type for subfunctions
From: Piotr Raczynski <[email protected]>
Add required plumbing for new VSI type dedicated to devlink subfunctions. Make sure that the vsi is properly configured and destroyed. Also allow loading XDP and AF_XDP sockets.
The first implementation of devlink subfunctions supports only one Tx/Rx queue pair per given subfunction.
--- drivers/net/ethernet/intel/ice/ice_base.c | 5 +++- drivers/net/ethernet/intel/ice/ice_dcb_lib.c | 1 + drivers/net/ethernet/intel/ice/ice_lib.c | 25 ++++++++++++++++++-- drivers/net/ethernet/intel/ice/ice_main.c | 7 ++++-- drivers/net/ethernet/intel/ice/ice_type.h | 1 + drivers/net/ethernet/intel/ice/ice_xsk.c | 2 +- 6 files changed, 35 insertions(+), 6 deletions(-)
drivers/net/ethernet/intel/ice/ice_base.c +4 -1
@@ -330,6 +330,9 @@ ice_setup_tx_ctx(struct ice_tx_ring *ring, struct ice_tlan_ctx *tlan_ctx, u16 pf tlan_ctx->vmvf_num = hw->func_caps.vf_base_id + vsi->vf->vf_id; tlan_ctx->vmvf_type =ICE_TLAN_CTX_VMVF_TYPE_VF ;break ; +case ICE_VSI_SF : + tlan_ctx->vmvf_type =ICE_TLAN_CTX_VMVF_TYPE_VMQ ; +break ;default :return ; }
@@ -526,7 +529,7 @@ static int ice_vsi_cfg_rxq(struct ice_rx_ring *ring) ring->rx_buf_len = ring->vsi->rx_buf_len; -if (ring->vsi->type ==ICE_VSI_PF ) { +if (ring->vsi->type ==ICE_VSI_PF || ring->vsi->type ==ICE_VSI_SF ) {if (!xdp_rxq_info_is_reg (&ring->xdp_rxq)) { err = __xdp_rxq_info_reg(&ring->xdp_rxq, ring->netdev, ring->q_index,
drivers/net/ethernet/intel/ice/ice_dcb_lib.c +1 -0
@@ -187,6 +187,7 @@ void ice_vsi_set_dcb_tc_cfg(struct ice_vsi *vsi) vsi->tc_cfg.numtc =ice_dcb_get_num_tc (cfg);break ;case ICE_VSI_CHNL : +case ICE_VSI_SF : vsi->tc_cfg.ena_tc =BIT (ice_get_first_droptc (vsi)); vsi->tc_cfg.numtc =1 ;break ;
drivers/net/ethernet/intel/ice/ice_lib.c +23 -2
@@ -20,6 +20,8 @@ const char *ice_vsi_type_str(enum ice_vsi_type vsi_type)return "ICE_VSI_PF" ;case ICE_VSI_VF :return "ICE_VSI_VF" ; +case ICE_VSI_SF : +return "ICE_VSI_SF" ;case ICE_VSI_CTRL :return "ICE_VSI_CTRL" ;case ICE_VSI_CHNL :
@@ -141,6 +143,7 @@ static void ice_vsi_set_num_desc(struct ice_vsi *vsi) {switch (vsi->type) {case ICE_VSI_PF : +case ICE_VSI_SF :case ICE_VSI_CTRL :case ICE_VSI_LB :/* a user could change the values of num_[tr]x_desc using
@@ -207,6 +210,12 @@ static void ice_vsi_set_num_qs(struct ice_vsi *vsi)max_t (int, vsi->alloc_rxq, vsi->alloc_txq));break ; +case ICE_VSI_SF : + vsi->alloc_txq =1 ; + vsi->alloc_rxq =1 ; + vsi->num_q_vectors =1 ; + vsi->irq_dyn_alloc = true; +break ;case ICE_VSI_VF :if (vf->num_req_qs) vf->num_vf_qs = vf->num_req_qs;
@@ -566,6 +575,7 @@ ice_vsi_alloc_def(struct ice_vsi *vsi, struct ice_channel *ch)switch (vsi->type) {case ICE_VSI_PF : +case ICE_VSI_SF :/* Setup default MSIX irq handler for VSI */ vsi->irq_handler = ice_msix_clean_rings;break ;
@@ -894,6 +904,11 @@ static void ice_vsi_set_rss_params(struct ice_vsi *vsi) max_rss_size); vsi->rss_lut_type =ICE_LUT_PF ;break ; +case ICE_VSI_SF : + vsi->rss_table_size =ICE_LUT_VSI_SIZE ; + vsi->rss_size =min_t (u16,num_online_cpus (), max_rss_size); + vsi->rss_lut_type =ICE_LUT_VSI ; +break ;case ICE_VSI_VF :/* VF VSI will get a small RSS table. * For VSI_LUT, LUT size should be set to 64 bytes.
@@ -1141,6 +1156,7 @@ static void ice_set_rss_vsi_ctx(struct ice_vsi_ctx *ctxt, struct ice_vsi *vsi) lut_type =ICE_AQ_VSI_Q_OPT_RSS_LUT_PF ;break ;case ICE_VSI_VF : +case ICE_VSI_SF :/* VF VSI will gets a small RSS table which is a VSI LUT type */ lut_type =ICE_AQ_VSI_Q_OPT_RSS_LUT_VSI ;break ;
@@ -1219,6 +1235,7 @@ static int ice_vsi_init(struct ice_vsi *vsi, u32 vsi_flags)case ICE_VSI_PF : ctxt->flags =ICE_AQ_VSI_TYPE_PF ;break ; +case ICE_VSI_SF :case ICE_VSI_CHNL : ctxt->flags =ICE_AQ_VSI_TYPE_VMDQ2 ;break ;
@@ -2100,6 +2117,7 @@ static void ice_set_agg_vsi(struct ice_vsi *vsi)case ICE_VSI_CHNL :case ICE_VSI_LB :case ICE_VSI_PF : +case ICE_VSI_SF : max_agg_nodes =ICE_MAX_PF_AGG_NODES ; agg_node_id_start =ICE_PF_AGG_NODE_ID_START ; agg_node_iter = &pf->pf_agg_node[0 ];
@@ -2271,6 +2289,7 @@ ice_vsi_cfg_def(struct ice_vsi *vsi, struct ice_vsi_cfg_params *params)switch (vsi->type) {case ICE_VSI_CTRL : +case ICE_VSI_SF :case ICE_VSI_PF : ret =ice_vsi_alloc_q_vectors (vsi);if (ret)
@@ -2662,7 +2681,8 @@ int ice_ena_vsi(struct ice_vsi *vsi, bool locked)clear_bit (ICE_VSI_NEEDS_RESTART , vsi->state); -if (vsi->netdev && vsi->type ==ICE_VSI_PF ) { +if (vsi->netdev && (vsi->type ==ICE_VSI_PF || + vsi->type ==ICE_VSI_SF )) {if (netif_running (vsi->netdev)) {if (!locked)rtnl_lock ();
@@ -2691,7 +2711,8 @@ void ice_dis_vsi(struct ice_vsi *vsi, bool locked)set_bit (ICE_VSI_NEEDS_RESTART , vsi->state); -if (vsi->type ==ICE_VSI_PF && vsi->netdev) { +if (vsi->netdev && (vsi->type ==ICE_VSI_PF || + vsi->type ==ICE_VSI_SF )) {if (netif_running (vsi->netdev)) {if (!locked)rtnl_lock ();
drivers/net/ethernet/intel/ice/ice_main.c +5 -2
@@ -2946,6 +2946,9 @@ int ice_vsi_determine_xdp_res(struct ice_vsi *vsi)if (avail < cpus /2 )return -ENOMEM ; +if (vsi->type ==ICE_VSI_SF ) + avail = vsi->alloc_txq; + vsi->num_xdp_txq =min_t (u16, avail, cpus);if (vsi->num_xdp_txq < cpus)
@@ -3061,8 +3064,8 @@ static int ice_xdp(struct net_device *dev, struct netdev_bpf *xdp)struct ice_netdev_priv *np =netdev_priv (dev);struct ice_vsi *vsi = np->vsi; -if (vsi->type !=ICE_VSI_PF ) { -NL_SET_ERR_MSG_MOD (xdp->extack,"XDP can be loaded only on PF VSI" ); +if (vsi->type !=ICE_VSI_PF && vsi->type !=ICE_VSI_SF ) { +NL_SET_ERR_MSG_MOD (xdp->extack,"XDP can be loaded only on PF or SF VSI" );return -EINVAL ; }
drivers/net/ethernet/intel/ice/ice_type.h +1 -0
@@ -150,6 +150,7 @@ enum ice_vsi_type {ICE_VSI_CTRL =3 ,/* equates to ICE_VSI_PF with 1 queue pair */ ICE_VSI_CHNL =4 ,ICE_VSI_LB =6 , + ICE_VSI_SF = 9, }; struct ice_link_status {
drivers/net/ethernet/intel/ice/ice_xsk.c +1 -1
@@ -288,7 +288,7 @@ ice_xsk_pool_enable(struct ice_vsi *vsi, struct xsk_buff_pool *pool, u16 qid) {int err; -if (vsi->type !=ICE_VSI_PF ) +if (vsi->type !=ICE_VSI_PF && vsi->type !=ICE_VSI_SF )return -EINVAL ; if (qid >= vsi->netdev->real_num_rx_queues ||
Signature · 1 line
2.42.0
PATCH v3 2/7 ice: export ice ndo_ops functions
In reply to Michal SwiatkowskiFrom: Piotr Raczynski <[email protected]>
Make some of the netdevice_ops functions visible from outside for another VSI type created netdev.
--- drivers/net/ethernet/intel/ice/ice.h | 8 +++++ drivers/net/ethernet/intel/ice/ice_lib.c | 22 ++++++++++++++ drivers/net/ethernet/intel/ice/ice_lib.h | 1 + drivers/net/ethernet/intel/ice/ice_main.c | 37 ++++------------------- 4 files changed, 37 insertions(+), 31 deletions(-)
drivers/net/ethernet/intel/ice/ice.h +8 -0
@@ -982,6 +982,14 @@ void ice_unload(struct ice_pf *pf);void ice_adv_lnk_speed_maps_init (void );int ice_init_dev (struct ice_pf *pf);void ice_deinit_dev (struct ice_pf *pf); +int ice_change_mtu (struct net_device *netdev,int new_mtu); +void ice_tx_timeout (struct net_device *netdev,unsigned int txqueue); +int ice_xdp (struct net_device *dev,struct netdev_bpf *xdp); +void ice_set_netdev_features (struct net_device *netdev); +int ice_vlan_rx_add_vid (struct net_device *netdev,__be16 proto,u16 vid); +int ice_vlan_rx_kill_vid (struct net_device *netdev,__be16 proto,u16 vid); +void ice_get_stats64 (struct net_device *netdev, +struct rtnl_link_stats64 *stats);/** * ice_set_rdma_cap - enable RDMA support
drivers/net/ethernet/intel/ice/ice_lib.c +22 -0
@@ -2846,6 +2846,28 @@ void ice_vsi_set_napi_queues(struct ice_vsi *vsi)ice_q_vector_set_napi_queues (vsi->q_vectors[i]); } +/** +* ice_napi_add - register NAPI handler for the VSI +* @vsi: VSI for which NAPI handler is to be registered +* +* This function is only called in the driver's load path. Registering the NAPI +* handler is done in ice_vsi_alloc_q_vector() for all other cases (i.e. resume, +* reset/rebuild, etc.) +*/ +void ice_napi_add (struct ice_vsi *vsi) +{ +int v_idx; + +if (!vsi->netdev) +return ; + +ice_for_each_q_vector (vsi, v_idx) { +netif_napi_add (vsi->netdev, &vsi->q_vectors[v_idx]->napi, + ice_napi_poll); +__ice_q_vector_set_napi_queues (vsi->q_vectors[v_idx], false); + } +} +/** * ice_vsi_release - Delete a VSI and free its resources * @vsi: the VSI being removed
drivers/net/ethernet/intel/ice/ice_lib.h +1 -0
@@ -90,6 +90,7 @@ void __ice_q_vector_set_napi_queues(struct ice_q_vector *q_vector, bool locked);void ice_q_vector_set_napi_queues (struct ice_q_vector *q_vector);void ice_vsi_set_napi_queues (struct ice_vsi *vsi); +void ice_napi_add (struct ice_vsi *vsi);int ice_vsi_release (struct ice_vsi *vsi);
drivers/net/ethernet/intel/ice/ice_main.c +6 -31
@@ -3059,7 +3059,7 @@ static int ice_xdp_safe_mode(struct net_device __always_unused *dev,* @dev: netdevice * @xdp: XDP command */ -static int ice_xdp (struct net_device *dev,struct netdev_bpf *xdp) +int ice_xdp (struct net_device *dev,struct netdev_bpf *xdp) {struct ice_netdev_priv *np =netdev_priv (dev);struct ice_vsi *vsi = np->vsi;
@@ -3518,28 +3518,6 @@ static int ice_req_irq_msix_misc(struct ice_pf *pf)return 0 ; } -/** -* ice_napi_add - register NAPI handler for the VSI -* @vsi: VSI for which NAPI handler is to be registered -* -* This function is only called in the driver's load path. Registering the NAPI -* handler is done in ice_vsi_alloc_q_vector() for all other cases (i.e. resume, -* reset/rebuild, etc.) -*/ -static void ice_napi_add (struct ice_vsi *vsi) -{ -int v_idx; - -if (!vsi->netdev) -return ; - -ice_for_each_q_vector (vsi, v_idx) { -netif_napi_add (vsi->netdev, &vsi->q_vectors[v_idx]->napi, - ice_napi_poll); -__ice_q_vector_set_napi_queues (vsi->q_vectors[v_idx], false); - } -} -/** * ice_set_ops - set netdev and ethtools ops for the given netdev * @vsi: the VSI associated with the new netdev
@@ -3573,7 +3551,7 @@ static void ice_set_ops(struct ice_vsi *vsi)* ice_set_netdev_features - set features for the given netdev * @netdev: netdev instance */ -static void ice_set_netdev_features (struct net_device *netdev) +void ice_set_netdev_features (struct net_device *netdev) {struct ice_pf *pf =ice_netdev_to_pf (netdev);bool is_dvm_ena =ice_is_dvm_ena (&pf->hw);
@@ -3755,8 +3733,7 @@ ice_lb_vsi_setup(struct ice_pf *pf, struct ice_port_info *pi)* * net_device_ops implementation for adding VLAN IDs */ -static int -ice_vlan_rx_add_vid (struct net_device *netdev,__be16 proto,u16 vid) +int ice_vlan_rx_add_vid (struct net_device *netdev,__be16 proto,u16 vid) {struct ice_netdev_priv *np =netdev_priv (netdev);struct ice_vsi_vlan_ops *vlan_ops;
@@ -3818,8 +3795,7 @@ ice_vlan_rx_add_vid(struct net_device *netdev, __be16 proto, u16 vid)* * net_device_ops implementation for removing VLAN IDs */ -static int -ice_vlan_rx_kill_vid (struct net_device *netdev,__be16 proto,u16 vid) +int ice_vlan_rx_kill_vid (struct net_device *netdev,__be16 proto,u16 vid) {struct ice_netdev_priv *np =netdev_priv (netdev);struct ice_vsi_vlan_ops *vlan_ops;
@@ -7052,7 +7028,6 @@ void ice_update_pf_stats(struct ice_pf *pf)* @netdev: network interface device structure * @stats: main device statistics structure */ -static void ice_get_stats64 (struct net_device *netdev,struct rtnl_link_stats64 *stats) {struct ice_netdev_priv *np =netdev_priv (netdev);
@@ -7725,7 +7700,7 @@ static void ice_rebuild(struct ice_pf *pf, enum ice_reset_req reset_type)* * Returns 0 on success, negative on failure */ -static int ice_change_mtu (struct net_device *netdev,int new_mtu) +int ice_change_mtu (struct net_device *netdev,int new_mtu) {struct ice_netdev_priv *np =netdev_priv (netdev);struct ice_vsi *vsi = np->vsi;
@@ -8149,7 +8124,7 @@ ice_bridge_setlink(struct net_device *dev, struct nlmsghdr *nlh,* @netdev: network interface device structure * @txqueue: Tx queue */ -static void ice_tx_timeout (struct net_device *netdev,unsigned int txqueue) +void ice_tx_timeout (struct net_device *netdev,unsigned int txqueue) {struct ice_netdev_priv *np =netdev_priv (netdev);struct ice_tx_ring *tx_ring =NULL ;
Signature · 1 line
2.42.0
PATCH v3 3/7 ice: add basic devlink subfunctions support
In reply to Michal SwiatkowskiFrom: Piotr Raczynski <[email protected]>
Implement devlink port handlers responsible for ethernet type devlink subfunctions. Create subfunction devlink port and setup all resources needed for a subfunction netdev to operate. Configure new VSI for each new subfunction, initialize and configure interrupts and Tx/Rx resources. Set correct MAC filters and create new netdev.
For now, subfunction is limited to only one Tx/Rx queue pair.
Only allocate new subfunction VSI with devlink port new command. This makes sure that real resources are configured only when a new subfunction gets activated. Allocate and free subfunction MSIX interrupt vectors using new API calls with pci_msix_alloc_irq_at and pci_msix_free_irq.
Support both automatic and manual subfunction numbers. If no subfunction number is provided, use xa_alloc to pick a number automatically. This will find the first free index and use that as the number. This reduces burden on users in the simple case where a specific number is not required. It may also be slightly faster to check that a number exists since xarray lookup should be faster than a linear scan of the dyn_ports xarray.
--- .../net/ethernet/intel/ice/devlink/devlink.c | 3 + .../ethernet/intel/ice/devlink/devlink_port.c | 454 ++++++++++++++++++ .../ethernet/intel/ice/devlink/devlink_port.h | 30 ++ drivers/net/ethernet/intel/ice/ice.h | 4 + drivers/net/ethernet/intel/ice/ice_lib.c | 5 +- drivers/net/ethernet/intel/ice/ice_lib.h | 2 + drivers/net/ethernet/intel/ice/ice_main.c | 12 +- 7 files changed, 506 insertions(+), 4 deletions(-)
drivers/net/ethernet/intel/ice/devlink/devlink.c +3 -0
@@ -6,6 +6,7 @@#include "ice.h" #include "ice_lib.h" #include "devlink.h" +#include "devlink_port.h" #include "ice_eswitch.h" #include "ice_fw_update.h" #include "ice_dcb_lib.h"
@@ -1281,6 +1282,8 @@ static const struct devlink_ops ice_devlink_ops = { .rate_leaf_parent_set = ice_devlink_set_parent, .rate_node_parent_set = ice_devlink_set_parent, + + .port_new = ice_devlink_port_new, }; static int
drivers/net/ethernet/intel/ice/devlink/devlink_port.c +454 -0
463 lines not on this page · raw message
drivers/net/ethernet/intel/ice/devlink/devlink_port.h +30 -0
@@ -4,9 +4,39 @@#ifndef _DEVLINK_PORT_H_#define _DEVLINK_PORT_H_ +#include "../ice.h" + +/** +* struct ice_dynamic_port - Track dynamically added devlink port instance +* @hw_addr: the HW address for this port +* @active: true if the port has been activated +* @devlink_port: the associated devlink port structure +* @pf: pointer to the PF private structure +* @vsi: the VSI associated with this port +* +* An instance of a dynamically added devlink port. Each port flavour +*/ +struct ice_dynamic_port { +u8 hw_addr[ETH_ALEN ]; +u8 active :1 ; +struct devlink_port devlink_port; +struct ice_pf *pf; +struct ice_vsi *vsi; +}; + +void ice_dealloc_all_dynamic_ports (struct ice_pf *pf); +int ice_devlink_create_pf_port (struct ice_pf *pf);void ice_devlink_destroy_pf_port (struct ice_pf *pf);int ice_devlink_create_vf_port (struct ice_vf *vf);void ice_devlink_destroy_vf_port (struct ice_vf *vf); +#define ice_devlink_port_to_dyn (p) \ + container_of(port, struct ice_dynamic_port, devlink_port) + +int +ice_devlink_port_new (struct devlink *devlink, +const struct devlink_port_new_attrs *new_attr, +struct netlink_ext_ack *extack, +struct devlink_port **devlink_port);#endif /* _DEVLINK_PORT_H_ */
drivers/net/ethernet/intel/ice/ice.h +4 -0
@@ -649,6 +649,9 @@ struct ice_pf {struct ice_eswitch eswitch;struct ice_esw_br_port *br_port; +struct xarray dyn_ports; +struct xarray sf_nums; +#define ICE_INVALID_AGG_NODE_ID 0#define ICE_PF_AGG_NODE_ID_START 1#define ICE_MAX_PF_AGG_NODES 32
@@ -905,6 +908,7 @@ int ice_vsi_open(struct ice_vsi *vsi);void ice_set_ethtool_ops (struct net_device *netdev);void ice_set_ethtool_repr_ops (struct net_device *netdev);void ice_set_ethtool_safe_mode_ops (struct net_device *netdev); +void ice_set_ethtool_sf_ops (struct net_device *netdev);u16 ice_get_avail_txq_count (struct ice_pf *pf);u16 ice_get_avail_rxq_count (struct ice_pf *pf);int ice_vsi_recfg_qs (struct ice_vsi *vsi,int new_rx,int new_tx,bool locked);
drivers/net/ethernet/intel/ice/ice_lib.c +3 -2
@@ -7,6 +7,7 @@#include "ice_lib.h" #include "ice_fltr.h" #include "ice_dcb_lib.h" +#include "ice_type.h" #include "ice_vsi_vlan_ops.h" /**
@@ -440,7 +441,7 @@ static int ice_vsi_alloc_ring_stats(struct ice_vsi *vsi)* This deallocates the VSI's queue resources, removes it from the PF's * VSI array if necessary, and deallocates the VSI */ -static void ice_vsi_free (struct ice_vsi *vsi) +void ice_vsi_free (struct ice_vsi *vsi) {struct ice_pf *pf =NULL ;struct device *dev;
@@ -612,7 +613,7 @@ ice_vsi_alloc_def(struct ice_vsi *vsi, struct ice_channel *ch)* * returns a pointer to a VSI on success, NULL on failure. */ -static struct ice_vsi *ice_vsi_alloc (struct ice_pf *pf) +struct ice_vsi *ice_vsi_alloc (struct ice_pf *pf) {struct device *dev =ice_pf_to_dev (pf);struct ice_vsi *vsi =NULL ;
drivers/net/ethernet/intel/ice/ice_lib.h +2 -0
@@ -103,6 +103,8 @@ void ice_dis_vsi(struct ice_vsi *vsi, bool locked);int ice_vsi_rebuild (struct ice_vsi *vsi,u32 vsi_flags);int ice_vsi_cfg (struct ice_vsi *vsi,struct ice_vsi_cfg_params *params); +struct ice_vsi *ice_vsi_alloc (struct ice_pf *pf); +void ice_vsi_free (struct ice_vsi *vsi);bool ice_is_reset_in_progress (unsigned long *state);int ice_wait_for_reset (struct ice_pf *pf,unsigned long timeout);
drivers/net/ethernet/intel/ice/ice_main.c +10 -2
@@ -3964,6 +3964,9 @@ static void ice_deinit_pf(struct ice_pf *pf)if (pf->ptp.clock)ptp_clock_unregister (pf->ptp.clock); + +xa_destroy (&pf->dyn_ports); +xa_destroy (&pf->sf_nums); }/**
@@ -4057,6 +4060,9 @@ static int ice_init_pf(struct ice_pf *pf)hash_init (pf->vfs.table);ice_mbx_init_snapshot (&pf->hw); +xa_init (&pf->dyn_ports); +xa_init (&pf->sf_nums); +return 0 ; }
@@ -5376,6 +5382,7 @@ static void ice_remove(struct pci_dev *pdev)ice_remove_arfs (pf);devl_lock (priv_to_devlink (pf)); +ice_dealloc_all_dynamic_ports (pf);ice_deinit_devlink (pf);ice_unload (pf);
@@ -6670,7 +6677,8 @@ static int ice_up_complete(struct ice_vsi *vsi)if (vsi->port_info && (vsi->port_info->phy.link_info.link_info &ICE_AQ_LINK_UP ) && - vsi->netdev && vsi->type ==ICE_VSI_PF ) { + ((vsi->netdev && vsi->type ==ICE_VSI_PF ) || + (vsi->netdev && vsi->type ==ICE_VSI_SF ))) {ice_print_link_msg (vsi, true);netif_tx_start_all_queues (vsi->netdev);netif_carrier_on (vsi->netdev);
@@ -7368,7 +7376,7 @@ int ice_vsi_open(struct ice_vsi *vsi)ice_vsi_cfg_netdev_tc (vsi, vsi->tc_cfg.ena_tc); -if (vsi->type ==ICE_VSI_PF ) { +if (vsi->type ==ICE_VSI_PF || vsi->type ==ICE_VSI_SF ) {/* Notify the stack of the actual queue counts. */ err =netif_set_real_num_tx_queues (vsi->netdev, vsi->num_txq);if (err)
Signature · 1 line
2.42.0
Re: [iwl-next v3 3/7] ice: add basic devlink subfunctions support
Quoted 84 lines · Fri, Apr 12, 2024 at 08:30:49AM CEST, [email protected] wrote:
From: Piotr Raczynski <[email protected]>
Implement devlink port handlers responsible for ethernet type devlink subfunctions. Create subfunction devlink port and setup all resources needed for a subfunction netdev to operate. Configure new VSI for each new subfunction, initialize and configure interrupts and Tx/Rx resources. Set correct MAC filters and create new netdev.
For now, subfunction is limited to only one Tx/Rx queue pair.
Only allocate new subfunction VSI with devlink port new command. This makes sure that real resources are configured only when a new subfunction gets activated. Allocate and free subfunction MSIX interrupt vectors using new API calls with
pci_msix_alloc_irq_atandpci_msix_free_irq.Support both automatic and manual subfunction numbers. If no subfunction number is provided, use
xa_allocto pick a number automatically. This will find the first free index and use that as the number. This reduces burden on users in the simple case where a specific number is not required. It may also be slightly faster to check that a number exists since xarray lookup should be faster than a linear scan of thedyn_portsxarray.Reviewed-by Wojciech Drewek <[email protected]>Co-developed-by Jacob Keller <[email protected]>Signed-off-by Jacob Keller <[email protected]>Signed-off-by Piotr Raczynski <[email protected]>Signed-off-by Michal Swiatkowski <[email protected]>---
.../net/ethernet/intel/ice/devlink/devlink.c | 3 + .../ethernet/intel/ice/devlink/devlink_port.c | 454 ++++++++++++++++++ .../ethernet/intel/ice/devlink/devlink_port.h | 30 ++ drivers/net/ethernet/intel/ice/ice.h | 4 + drivers/net/ethernet/intel/ice/ice_lib.c | 5 +- drivers/net/ethernet/intel/ice/ice_lib.h | 2 + drivers/net/ethernet/intel/ice/ice_main.c | 12 +- 7 files changed, 506 insertions(+), 4 deletions(-)drivers/net/ethernet/intel/ice/devlink/devlink.c +3
-0@@ -6,6 +6,7 @@#include "ice.h" #include "ice_lib.h" #include "devlink.h" +#include "devlink_port.h" #include "ice_eswitch.h" #include "ice_fw_update.h" #include "ice_dcb_lib.h" @@ -1281,6 +1282,8 @@ static const struct devlink_ops ice_devlink_ops = { .rate_leaf_parent_set = ice_devlink_set_parent, .rate_node_parent_set = ice_devlink_set_parent, + + .port_new = ice_devlink_port_new, };static int
drivers/net/ethernet/intel/ice/devlink/devlink_port.c +9
-0@@ -5,6 +5,9 @@#include "ice.h" #include "devlink.h" +#include "devlink_port.h" +#include "ice_lib.h" +#include "ice_fltr.h" static int ice_active_port_option =-1 ;@@ -428,3 +431,454 @@ void ice_devlink_destroy_vf_port(struct ice_vf *vf)devl_rate_leaf_destroy (&vf->devlink_port);devlink_port_unregister (&vf->devlink_port); } + +/** +* ice_activate_dynamic_port - Activate a dynamic port +* @dyn_port: dynamic port instance to activate +* @extack: extack for reporting error messages +*
drivers/net/ethernet/intel/ice/devlink/devlink_port.c void ice_devlink_destroy_vf_port(struct ice_vf *vf) · line 449
Quoted 10 lines
drivers/net/ethernet/intel/ice/devlink/devlink_port.c +10
-0+* Activate the dynamic port based on its flavour. +* +* Return: zero on success or an error code on failure. +*/ +static int +ice_activate_dynamic_port (struct ice_dynamic_port *dyn_port, +struct netlink_ext_ack *extack) +{ + dyn_port->active = true; +return 0 ;
This is odd. You do dummy activation, the actual activation function is added later on in this patchset. Could you please reorder the patches so this one is the last one? When user does activation, everything should work now.
Quoted 67 lines
drivers/net/ethernet/intel/ice/devlink/devlink_port.c +67
-0+ +} + +/** +* ice_deactivate_dynamic_port - Deactivate a dynamic port +* @dyn_port: dynamic port instance to deactivate +* +* Undo activation of a dynamic port. +*/ +static void ice_deactivate_dynamic_port (struct ice_dynamic_port *dyn_port) +{ + dyn_port->active = false; +} + +/** +* ice_dealloc_dynamic_port - Deallocate and remove a dynamic port +* @dyn_port: dynamic port instance to deallocate +* +* Free resources associated with a dynamically added devlink port. Will +* deactivate the port if its currently active. +*/ +static void ice_dealloc_dynamic_port (struct ice_dynamic_port *dyn_port) +{ +struct devlink_port *devlink_port = &dyn_port->devlink_port; +struct ice_pf *pf = dyn_port->pf; + +if (dyn_port->active) +ice_deactivate_dynamic_port (dyn_port); + +xa_erase (&pf->sf_nums, devlink_port->attrs.pci_sf.sf); +devl_port_unregister (devlink_port); +ice_vsi_free (dyn_port->vsi); +xa_erase (&pf->dyn_ports, dyn_port->vsi->idx); +kfree (dyn_port); +} + +/** +* ice_dealloc_all_dynamic_ports - Deallocate all dynamic devlink ports +* @pf: pointer to the pf structure +*/ +void ice_dealloc_all_dynamic_ports (struct ice_pf *pf) +{ +struct ice_dynamic_port *dyn_port; +unsigned long index; + +xa_for_each (&pf->dyn_ports, index, dyn_port) +ice_dealloc_dynamic_port (dyn_port); +} + +/** +* ice_devlink_port_new_check_attr - Check that new port attributes are valid +* @pf: pointer to the PF structure +* @new_attr: the attributes for the new port +* @extack: extack for reporting error messages +* +* Check that the attributes for the new port are valid before continuing to +* allocate the devlink port. +* +* Return: zero on success or an error code on failure. +*/ +static int +ice_devlink_port_new_check_attr (struct ice_pf *pf, +const struct devlink_port_new_attrs *new_attr, +struct netlink_ext_ack *extack) +{ +if (new_attr->flavour !=DEVLINK_PORT_FLAVOUR_PCI_SF ) { +NL_SET_ERR_MSG_MOD (extack,"Flavour other than pcisf is not supported" );
drivers/net/ethernet/intel/ice/devlink/devlink_port.c void ice_devlink_destroy_vf_port(struct ice_vf *vf) · line 526
Quoted 10 lines
drivers/net/ethernet/intel/ice/devlink/devlink_port.c +10
-0+return -EOPNOTSUPP ; + } + +if (new_attr->controller_valid) { +NL_SET_ERR_MSG_MOD (extack,"Setting controller is not supported" ); +return -EOPNOTSUPP ; + } + +if (new_attr->port_index_valid) { +NL_SET_ERR_MSG_MOD (extack,"Port index" );
Odd error message, please fix.
Quoted 57 lines
drivers/net/ethernet/intel/ice/devlink/devlink_port.c +57
-0+return -EOPNOTSUPP ; + } + +if (new_attr->pfnum != pf->hw.bus.func) { +NL_SET_ERR_MSG_MOD (extack,"Incorrect pfnum supplied" ); +return -EINVAL ; + } + +if (!pci_msix_can_alloc_dyn (pf->pdev)) { +NL_SET_ERR_MSG_MOD (extack,"Dynamic MSIX-X interrupt allocation is not supported" ); +return -EOPNOTSUPP ; + } + +return 0 ; +} + +/** +* ice_devlink_port_del - devlink handler for port delete +* @devlink: pointer to devlink +* @port: devlink port to be deleted +* @extack: pointer to extack +* +* Deletes devlink port and deallocates all resources associated with +* created subfunction. +* +* Return: zero on success or an error code on failure. +*/ +static int +ice_devlink_port_del (struct devlink *devlink,struct devlink_port *port, +struct netlink_ext_ack *extack) +{ +struct ice_dynamic_port *dyn_port; + + dyn_port =ice_devlink_port_to_dyn (port); +ice_dealloc_dynamic_port (dyn_port); + +return 0 ; +} + +/** +* ice_devlink_port_fn_hw_addr_set - devlink handler for mac address set +* @port: pointer to devlink port +* @hw_addr: hw address to set +* @hw_addr_len: hw address length +* @extack: extack for reporting error messages +* +* Sets mac address for the port, verifies arguments and copies address +* to the subfunction structure. +* +* Return: zero on success or an error code on failure. +*/ +static int +ice_devlink_port_fn_hw_addr_set (struct devlink_port *port,const u8 *hw_addr, +int hw_addr_len, +struct netlink_ext_ack *extack) +{ +struct ice_dynamic_port *dyn_port;
drivers/net/ethernet/intel/ice/devlink/devlink_port.c void ice_devlink_destroy_vf_port(struct ice_vf *vf) · line 593
Quoted 10 lines
drivers/net/ethernet/intel/ice/devlink/devlink_port.c +10
-0+ + dyn_port =ice_devlink_port_to_dyn (port); + +if (hw_addr_len !=ETH_ALEN || !is_valid_ether_addr (hw_addr)) { +NL_SET_ERR_MSG_MOD (extack,"Invalid ethernet address" ); +return -EADDRNOTAVAIL ; + } + +if (ether_addr_equal (dyn_port->hw_addr, hw_addr)) { +NL_SET_ERR_MSG_MOD (extack,"Address already set" );
Is this message necessary? It will print out a warning for user.
Quoted 81 lines
drivers/net/ethernet/intel/ice/devlink/devlink_port.c +81
-0+return 0 ; + } + +ether_addr_copy (dyn_port->hw_addr, hw_addr); + +return 0 ; +} + +/** +* ice_devlink_port_fn_hw_addr_get - devlink handler for mac address get +* @port: pointer to devlink port +* @hw_addr: hw address to set +* @hw_addr_len: hw address length +* @extack: extack for reporting error messages +* +* Returns mac address for the port. +* +* Return: zero on success or an error code on failure. +*/ +static int +ice_devlink_port_fn_hw_addr_get (struct devlink_port *port,u8 *hw_addr, +int *hw_addr_len, +struct netlink_ext_ack *extack) +{ +struct ice_dynamic_port *dyn_port; + + dyn_port =ice_devlink_port_to_dyn (port); + +ether_addr_copy (hw_addr, dyn_port->hw_addr); + *hw_addr_len =ETH_ALEN ; + +return 0 ; +} + +/** +* ice_devlink_port_fn_state_set - devlink handler for port state set +* @port: pointer to devlink port +* @state: state to set +* @extack: extack for reporting error messages +* +* Activates or deactivates the port. +* +* Return: zero on success or an error code on failure. +*/ +static int +ice_devlink_port_fn_state_set (struct devlink_port *port, +enum devlink_port_fn_state state, +struct netlink_ext_ack *extack) +{ +struct ice_dynamic_port *dyn_port; + + dyn_port =ice_devlink_port_to_dyn (port); + +switch (state) { +case DEVLINK_PORT_FN_STATE_ACTIVE : +if (!dyn_port->active) +return ice_activate_dynamic_port (dyn_port, extack); +break ; +case DEVLINK_PORT_FN_STATE_INACTIVE : +if (dyn_port->active) +ice_deactivate_dynamic_port (dyn_port); +break ; + } + +return 0 ; +} + +/** +* ice_devlink_port_fn_state_get - devlink handler for port state get +* @port: pointer to devlink port +* @state: admin configured state of the port +* @opstate: current port operational state +* @extack: extack for reporting error messages +* +* Gets port state. +* +* Return: zero on success or an error code on failure. +*/ +static int +ice_devlink_port_fn_state_get(struct devlink_port *port, + enum devlink_port_fn_state *state,
drivers/net/ethernet/intel/ice/devlink/devlink_port.c void ice_devlink_destroy_vf_port(struct ice_vf *vf) · line 684
Quoted 10 lines
drivers/net/ethernet/intel/ice/devlink/devlink_port.c +10
-0+enum devlink_port_fn_opstate *opstate, + struct netlink_ext_ack *extack) +{ + struct ice_dynamic_port *dyn_port; + + dyn_port =ice_devlink_port_to_dyn (port); + +if (dyn_port->active) { + *state =DEVLINK_PORT_FN_STATE_ACTIVE ; + *opstate =DEVLINK_PORT_FN_OPSTATE_ATTACHED ;
Interesting. This means that you don't distinguish between admin state and operational state. Meaning, when user does activate, you atomically achive the hw attachment and it is ready to go before activation cmd returns, correct? I'm just making sure I understand the code.
Quoted 112 lines
drivers/net/ethernet/intel/ice/devlink/devlink_port.c +112
-0+ }else { + *state =DEVLINK_PORT_FN_STATE_INACTIVE ; + *opstate =DEVLINK_PORT_FN_OPSTATE_DETACHED ; + } + +return 0 ; +} + +static const struct devlink_port_ops ice_devlink_port_sf_ops = { + .port_del = ice_devlink_port_del, + .port_fn_hw_addr_get = ice_devlink_port_fn_hw_addr_get, + .port_fn_hw_addr_set = ice_devlink_port_fn_hw_addr_set, + .port_fn_state_get = ice_devlink_port_fn_state_get, + .port_fn_state_set = ice_devlink_port_fn_state_set, +}; + +/** +* ice_reserve_sf_num - Reserve a subfunction number for this port +* @pf: pointer to the pf structure +* @new_attr: devlink port attributes requested +* @extack: extack for reporting error messages +* @sfnum: on success, the sf number reserved +* +* Reserve a subfunction number for this port. Only called for +* DEVLINK_PORT_FLAVOUR_PCI_SF ports. +* +* Return: zero on success or an error code on failure. +*/ +static int +ice_reserve_sf_num (struct ice_pf *pf, +const struct devlink_port_new_attrs *new_attr, +struct netlink_ext_ack *extack,u32 *sfnum) +{ +int err; + +/* If user didn't request an explicit number, pick one */ +if (!new_attr->sfnum_valid) +return xa_alloc (&pf->sf_nums, sfnum,NULL , xa_limit_32b, +GFP_KERNEL ); + +/* Otherwise, check and use the number provided */ + err =xa_insert (&pf->sf_nums, new_attr->sfnum,NULL ,GFP_KERNEL ); +if (err) { +if (err == -EBUSY ) +NL_SET_ERR_MSG_MOD (extack,"Subfunction with given sfnum already exists" ); +return err; + } + + *sfnum = new_attr->sfnum; + +return 0 ; +} + +/** +* ice_devlink_create_sf_port - Register PCI subfunction devlink port +* @dyn_port: the dynamic port instance structure for this subfunction +* @sfnum: the subfunction number to use for the port +* +* Register PCI subfunction flavour devlink port for a dynamically added +* subfunction port. +* +* Return: zero on success or an error code on failure. +*/ +static int +ice_devlink_create_sf_port (struct ice_dynamic_port *dyn_port,u32 sfnum) +{ +struct devlink_port_attrs attrs = {}; +struct devlink_port *devlink_port; +struct devlink *devlink; +struct ice_vsi *vsi; +struct device *dev; +struct ice_pf *pf; +int err; + + vsi = dyn_port->vsi; + pf = dyn_port->pf; + dev =ice_pf_to_dev (pf); + + devlink_port = &dyn_port->devlink_port; + + attrs.flavour =DEVLINK_PORT_FLAVOUR_PCI_SF ; + attrs.pci_sf.pf = pf->hw.bus.func; + attrs.pci_sf.sf = sfnum; + +devlink_port_attrs_set (devlink_port, &attrs); + devlink =priv_to_devlink (pf); + + err =devl_port_register_with_ops (devlink, devlink_port, vsi->idx, + &ice_devlink_port_sf_ops); +if (err) { +dev_err (dev,"Failed to create devlink port for Subfunction %d" , + vsi->idx); +return err; + } + +return 0 ; +} + +/** +* ice_alloc_dynamic_port - Allocate new dynamic port +* @pf: pointer to the pf structure +* @new_attr: devlink port attributes requested +* @extack: extack for reporting error messages +* @devlink_port: index of newly created devlink port +* +* Allocate a new dynamic port instance and prepare it for configuration +* with devlink. +* +* Return: zero on success or an error code on failure. +*/ +static int +ice_alloc_dynamic_port(struct ice_pf *pf,
drivers/net/ethernet/intel/ice/devlink/devlink_port.c void ice_devlink_destroy_vf_port(struct ice_vf *vf) · line 806
Quoted 10 lines
drivers/net/ethernet/intel/ice/devlink/devlink_port.c +10
-0+const struct devlink_port_new_attrs *new_attr, + struct netlink_ext_ack *extack, + struct devlink_port **devlink_port) +{ + struct ice_dynamic_port *dyn_port; +struct ice_vsi *vsi; +u32 sfnum; +int err; + +if (new_attr->flavour ==DEVLINK_PORT_FLAVOUR_PCI_SF ) {
Pointless check, this is already sanitized inice_devlink_port_new_check_attr()
Quoted 36 lines
drivers/net/ethernet/intel/ice/devlink/devlink_port.c +36
-0+ err =ice_reserve_sf_num (pf, new_attr, extack, &sfnum); +if (err) +return err; + } + + dyn_port =kzalloc (sizeof (*dyn_port),GFP_KERNEL ); +if (!dyn_port) { + err = -ENOMEM ; + goto unroll_reserve_sf_num; + } + + vsi =ice_vsi_alloc (pf); +if (!vsi) { +NL_SET_ERR_MSG_MOD (extack,"Unable to allocate VSI" ); + err = -ENOMEM ; + goto unroll_dyn_port_alloc; + } + + dyn_port->vsi = vsi; + dyn_port->pf = pf; +eth_random_addr (dyn_port->hw_addr); + + err =xa_insert (&pf->dyn_ports, vsi->idx, dyn_port,GFP_KERNEL ); +if (err) { +NL_SET_ERR_MSG_MOD (extack,"Port index reservation failed" ); + goto unroll_vsi_alloc; + } + + err =ice_devlink_create_sf_port (dyn_port, sfnum); +if (err) { +NL_SET_ERR_MSG_MOD (extack,"Port registration failed" ); + goto unroll_xa_insert; + } + + *devlink_port = &dyn_port->devlink_port; +
drivers/net/ethernet/intel/ice/devlink/devlink_port.c void ice_devlink_destroy_vf_port(struct ice_vf *vf) · line 852
Quoted 10 lines
drivers/net/ethernet/intel/ice/devlink/devlink_port.c +10
-0+return 0 ; + +unroll_xa_insert: +xa_erase (&pf->dyn_ports, vsi->idx); +unroll_vsi_alloc: +ice_vsi_free (vsi); +unroll_dyn_port_alloc: +kfree (dyn_port); +unroll_reserve_sf_num: +if (new_attr->flavour ==DEVLINK_PORT_FLAVOUR_PCI_SF )
Pointless check, this is already sanitized inice_devlink_port_new_check_attr()
Quoted 45 lines
drivers/net/ethernet/intel/ice/devlink/devlink_port.c +32
-0+xa_erase (&pf->sf_nums, sfnum); + +return err; +} + +/** +* ice_devlink_port_new - devlink handler for the new port +* @devlink: pointer to devlink +* @new_attr: pointer to the port new attributes +* @extack: extack for reporting error messages +* @devlink_port: pointer to a new port +* +* Creates new devlink port, checks new port attributes and reject +* any unsupported parameters, allocates new subfunction for that port. +* +* Return: zero on success or an error code on failure. +*/ +int +ice_devlink_port_new (struct devlink *devlink, +const struct devlink_port_new_attrs *new_attr, +struct netlink_ext_ack *extack, +struct devlink_port **devlink_port) +{ +struct ice_pf *pf =devlink_priv (devlink); +int err; + + err =ice_devlink_port_new_check_attr (pf, new_attr, extack); +if (err) +return err; + +return ice_alloc_dynamic_port (pf, new_attr, extack, devlink_port); +}drivers/net/ethernet/intel/ice/devlink/devlink_port.h +5
-0@@ -4,9 +4,39 @@#ifndef _DEVLINK_PORT_H_#define _DEVLINK_PORT_H_ +#include "../ice.h" + +/** +* struct ice_dynamic_port - Track dynamically added devlink port instance +* @hw_addr: the HW address for this port
drivers/net/ethernet/intel/ice/devlink/devlink_port.h line 21
Quoted 10 lines
drivers/net/ethernet/intel/ice/devlink/devlink_port.h +10
-0+* @active: true if the port has been activated +* @devlink_port: the associated devlink port structure +* @pf: pointer to the PF private structure +* @vsi: the VSI associated with this port +* +* An instance of a dynamically added devlink port. Each port flavour +*/ +struct ice_dynamic_port { +u8 hw_addr[ETH_ALEN ]; +u8 active :1 ;
Hmm, odd whitespace to my eye. Shouldn't this be:
u8 active: 1;
?
Quoted 129 lines
drivers/net/ethernet/intel/ice/devlink/devlink_port.h +15
-0+struct devlink_port devlink_port; +struct ice_pf *pf; + struct ice_vsi *vsi; +}; + +void ice_dealloc_all_dynamic_ports (struct ice_pf *pf); +int ice_devlink_create_pf_port (struct ice_pf *pf);void ice_devlink_destroy_pf_port (struct ice_pf *pf);int ice_devlink_create_vf_port (struct ice_vf *vf);void ice_devlink_destroy_vf_port (struct ice_vf *vf); +#define ice_devlink_port_to_dyn (p) \ + container_of(port, struct ice_dynamic_port, devlink_port) + +int +ice_devlink_port_new (struct devlink *devlink, +const struct devlink_port_new_attrs *new_attr, +struct netlink_ext_ack *extack, +struct devlink_port **devlink_port);#endif /* _DEVLINK_PORT_H_ */ drivers/net/ethernet/intel/ice/ice.h +4
-0@@ -649,6 +649,9 @@ struct ice_pf {struct ice_eswitch eswitch;struct ice_esw_br_port *br_port; +struct xarray dyn_ports; +struct xarray sf_nums; +#define ICE_INVALID_AGG_NODE_ID 0#define ICE_PF_AGG_NODE_ID_START 1#define ICE_MAX_PF_AGG_NODES 32@@ -905,6 +908,7 @@ int ice_vsi_open(struct ice_vsi *vsi);void ice_set_ethtool_ops (struct net_device *netdev);void ice_set_ethtool_repr_ops (struct net_device *netdev);void ice_set_ethtool_safe_mode_ops (struct net_device *netdev); +void ice_set_ethtool_sf_ops (struct net_device *netdev);u16 ice_get_avail_txq_count (struct ice_pf *pf);u16 ice_get_avail_rxq_count (struct ice_pf *pf);int ice_vsi_recfg_qs (struct ice_vsi *vsi,int new_rx,int new_tx,bool locked);drivers/net/ethernet/intel/ice/ice_lib.c +3
-2@@ -7,6 +7,7 @@#include "ice_lib.h" #include "ice_fltr.h" #include "ice_dcb_lib.h" +#include "ice_type.h" #include "ice_vsi_vlan_ops.h" /** @@ -440,7 +441,7 @@ static int ice_vsi_alloc_ring_stats(struct ice_vsi *vsi)* This deallocates the VSI's queue resources, removes it from the PF's * VSI array if necessary, and deallocates the VSI */ -static void ice_vsi_free (struct ice_vsi *vsi) +void ice_vsi_free (struct ice_vsi *vsi) {struct ice_pf *pf =NULL ;struct device *dev;@@ -612,7 +613,7 @@ ice_vsi_alloc_def(struct ice_vsi *vsi, struct ice_channel *ch)* * returns a pointer to a VSI on success, NULL on failure. */ -static struct ice_vsi *ice_vsi_alloc (struct ice_pf *pf) +struct ice_vsi *ice_vsi_alloc (struct ice_pf *pf) {struct device *dev =ice_pf_to_dev (pf);struct ice_vsi *vsi =NULL ;drivers/net/ethernet/intel/ice/ice_lib.h +2
-0@@ -103,6 +103,8 @@ void ice_dis_vsi(struct ice_vsi *vsi, bool locked);int ice_vsi_rebuild (struct ice_vsi *vsi,u32 vsi_flags);int ice_vsi_cfg (struct ice_vsi *vsi,struct ice_vsi_cfg_params *params); +struct ice_vsi *ice_vsi_alloc (struct ice_pf *pf); +void ice_vsi_free (struct ice_vsi *vsi);bool ice_is_reset_in_progress (unsigned long *state);int ice_wait_for_reset (struct ice_pf *pf,unsigned long timeout);drivers/net/ethernet/intel/ice/ice_main.c +9
-1@@ -3964,6 +3964,9 @@ static void ice_deinit_pf(struct ice_pf *pf)if (pf->ptp.clock)ptp_clock_unregister (pf->ptp.clock); + +xa_destroy (&pf->dyn_ports); +xa_destroy (&pf->sf_nums); }/** @@ -4057,6 +4060,9 @@ static int ice_init_pf(struct ice_pf *pf)hash_init (pf->vfs.table);ice_mbx_init_snapshot (&pf->hw); +xa_init (&pf->dyn_ports); +xa_init (&pf->sf_nums); +return 0 ; }@@ -5376,6 +5382,7 @@ static void ice_remove(struct pci_dev *pdev)ice_remove_arfs (pf);devl_lock (priv_to_devlink (pf)); +ice_dealloc_all_dynamic_ports (pf);ice_deinit_devlink (pf);ice_unload (pf);@@ -6670,7 +6677,8 @@ static int ice_up_complete(struct ice_vsi *vsi)if (vsi->port_info && (vsi->port_info->phy.link_info.link_info &ICE_AQ_LINK_UP ) && - vsi->netdev && vsi->type ==ICE_VSI_PF ) { + ((vsi->netdev && vsi->type ==ICE_VSI_PF ) || + (vsi->netdev && vsi->type ==ICE_VSI_SF ))) {ice_print_link_msg (vsi, true);netif_tx_start_all_queues (vsi->netdev);netif_carrier_on (vsi->netdev);
drivers/net/ethernet/intel/ice/ice_main.c int ice_vsi_open(struct ice_vsi *vsi) · line 7382
Quoted 8 lines
drivers/net/ethernet/intel/ice/ice_main.c +1
-1@@ -7368,7 +7376,7 @@ int ice_vsi_open(struct ice_vsi *vsi)ice_vsi_cfg_netdev_tc (vsi, vsi->tc_cfg.ena_tc); -if (vsi->type ==ICE_VSI_PF ) { +if (vsi->type ==ICE_VSI_PF || vsi->type ==ICE_VSI_SF ) {/* Notify the stack of the actual queue counts. */ err =netif_set_real_num_tx_queues (vsi->netdev, vsi->num_txq);if (err)
These 2 last hunks seem somewhat disconnected from the rest of the patch. Could that be a separate patch perhaps?
Quoted 4 lines
Signature · 1 line
2.42.0
Re: [iwl-next v3 3/7] ice: add basic devlink subfunctions support
Quoted 92 lines · Jiri Pirko
Quoted 91 lines · Fri, Apr 12, 2024 at 08:30:49AM CEST, [email protected] wrote:
From: Piotr Raczynski <[email protected]>
Implement devlink port handlers responsible for ethernet type devlink subfunctions. Create subfunction devlink port and setup all resources needed for a subfunction netdev to operate. Configure new VSI for each new subfunction, initialize and configure interrupts and Tx/Rx resources. Set correct MAC filters and create new netdev.
For now, subfunction is limited to only one Tx/Rx queue pair.
Only allocate new subfunction VSI with devlink port new command. This makes sure that real resources are configured only when a new subfunction gets activated. Allocate and free subfunction MSIX interrupt vectors using new API calls with
pci_msix_alloc_irq_atandpci_msix_free_irq.Support both automatic and manual subfunction numbers. If no subfunction number is provided, use
xa_allocto pick a number automatically. This will find the first free index and use that as the number. This reduces burden on users in the simple case where a specific number is not required. It may also be slightly faster to check that a number exists since xarray lookup should be faster than a linear scan of thedyn_portsxarray.Reviewed-by Wojciech Drewek <[email protected]>Co-developed-by Jacob Keller <[email protected]>Signed-off-by Jacob Keller <[email protected]>Signed-off-by Piotr Raczynski <[email protected]>Signed-off-by Michal Swiatkowski <[email protected]>---
.../net/ethernet/intel/ice/devlink/devlink.c | 3 + .../ethernet/intel/ice/devlink/devlink_port.c | 454 ++++++++++++++++++ .../ethernet/intel/ice/devlink/devlink_port.h | 30 ++ drivers/net/ethernet/intel/ice/ice.h | 4 + drivers/net/ethernet/intel/ice/ice_lib.c | 5 +- drivers/net/ethernet/intel/ice/ice_lib.h | 2 + drivers/net/ethernet/intel/ice/ice_main.c | 12 +- 7 files changed, 506 insertions(+), 4 deletions(-)drivers/net/ethernet/intel/ice/devlink/devlink.c +3
-0@@ -6,6 +6,7 @@#include "ice.h" #include "ice_lib.h" #include "devlink.h" +#include "devlink_port.h" #include "ice_eswitch.h" #include "ice_fw_update.h" #include "ice_dcb_lib.h" @@ -1281,6 +1282,8 @@ static const struct devlink_ops ice_devlink_ops = { .rate_leaf_parent_set = ice_devlink_set_parent, .rate_node_parent_set = ice_devlink_set_parent, + + .port_new = ice_devlink_port_new, };static int
drivers/net/ethernet/intel/ice/devlink/devlink_port.c +16
-0@@ -5,6 +5,9 @@#include "ice.h" #include "devlink.h" +#include "devlink_port.h" +#include "ice_lib.h" +#include "ice_fltr.h" static int ice_active_port_option =-1 ;@@ -428,3 +431,454 @@ void ice_devlink_destroy_vf_port(struct ice_vf *vf)devl_rate_leaf_destroy (&vf->devlink_port);devlink_port_unregister (&vf->devlink_port); } + +/** +* ice_activate_dynamic_port - Activate a dynamic port +* @dyn_port: dynamic port instance to activate +* @extack: extack for reporting error messages +* +* Activate the dynamic port based on its flavour. +* +* Return: zero on success or an error code on failure. +*/ +static int +ice_activate_dynamic_port (struct ice_dynamic_port *dyn_port, +struct netlink_ext_ack *extack)
Quoted 9 lines
drivers/net/ethernet/intel/ice/devlink/devlink_port.c void ice_devlink_destroy_vf_port(struct ice_vf *vf) · line 450
Quoted 3 lines
drivers/net/ethernet/intel/ice/devlink/devlink_port.c +3
-0+{ + dyn_port->active = true; +return 0 ;This is odd. You do dummy activation, the actual activation function is added later on in this patchset. Could you please reorder the patches so this one is the last one? When user does activation, everything should work now.
Ok, I will reorder the changes.
Quoted 72 lines
Quoted 72 lines
drivers/net/ethernet/intel/ice/devlink/devlink_port.c +71
-0+ +} + +/** +* ice_deactivate_dynamic_port - Deactivate a dynamic port +* @dyn_port: dynamic port instance to deactivate +* +* Undo activation of a dynamic port. +*/ +static void ice_deactivate_dynamic_port (struct ice_dynamic_port *dyn_port) +{ + dyn_port->active = false; +} + +/** +* ice_dealloc_dynamic_port - Deallocate and remove a dynamic port +* @dyn_port: dynamic port instance to deallocate +* +* Free resources associated with a dynamically added devlink port. Will +* deactivate the port if its currently active. +*/ +static void ice_dealloc_dynamic_port (struct ice_dynamic_port *dyn_port) +{ +struct devlink_port *devlink_port = &dyn_port->devlink_port; +struct ice_pf *pf = dyn_port->pf; + +if (dyn_port->active) +ice_deactivate_dynamic_port (dyn_port); + +xa_erase (&pf->sf_nums, devlink_port->attrs.pci_sf.sf); +devl_port_unregister (devlink_port); +ice_vsi_free (dyn_port->vsi); +xa_erase (&pf->dyn_ports, dyn_port->vsi->idx); +kfree (dyn_port); +} + +/** +* ice_dealloc_all_dynamic_ports - Deallocate all dynamic devlink ports +* @pf: pointer to the pf structure +*/ +void ice_dealloc_all_dynamic_ports (struct ice_pf *pf) +{ +struct ice_dynamic_port *dyn_port; +unsigned long index; + +xa_for_each (&pf->dyn_ports, index, dyn_port) +ice_dealloc_dynamic_port (dyn_port); +} + +/** +* ice_devlink_port_new_check_attr - Check that new port attributes are valid +* @pf: pointer to the PF structure +* @new_attr: the attributes for the new port +* @extack: extack for reporting error messages +* +* Check that the attributes for the new port are valid before continuing to +* allocate the devlink port. +* +* Return: zero on success or an error code on failure. +*/ +static int +ice_devlink_port_new_check_attr (struct ice_pf *pf, +const struct devlink_port_new_attrs *new_attr, +struct netlink_ext_ack *extack) +{ +if (new_attr->flavour !=DEVLINK_PORT_FLAVOUR_PCI_SF ) { +NL_SET_ERR_MSG_MOD (extack,"Flavour other than pcisf is not supported" ); +return -EOPNOTSUPP ; + } + +if (new_attr->controller_valid) {
Quoted 9 lines
drivers/net/ethernet/intel/ice/devlink/devlink_port.c void ice_devlink_destroy_vf_port(struct ice_vf *vf) · line 526
Quoted 6 lines
drivers/net/ethernet/intel/ice/devlink/devlink_port.c +6
-0+NL_SET_ERR_MSG_MOD (extack,"Setting controller is not supported" ); +return -EOPNOTSUPP ; + } + +if (new_attr->port_index_valid) { +NL_SET_ERR_MSG_MOD (extack,"Port index" );Odd error message, please fix.
Sure, I will rephrase.
Quoted 62 lines
Quoted 62 lines
drivers/net/ethernet/intel/ice/devlink/devlink_port.c +61
-0+return -EOPNOTSUPP ; + } + +if (new_attr->pfnum != pf->hw.bus.func) { +NL_SET_ERR_MSG_MOD (extack,"Incorrect pfnum supplied" ); +return -EINVAL ; + } + +if (!pci_msix_can_alloc_dyn (pf->pdev)) { +NL_SET_ERR_MSG_MOD (extack,"Dynamic MSIX-X interrupt allocation is not supported" ); +return -EOPNOTSUPP ; + } + +return 0 ; +} + +/** +* ice_devlink_port_del - devlink handler for port delete +* @devlink: pointer to devlink +* @port: devlink port to be deleted +* @extack: pointer to extack +* +* Deletes devlink port and deallocates all resources associated with +* created subfunction. +* +* Return: zero on success or an error code on failure. +*/ +static int +ice_devlink_port_del (struct devlink *devlink,struct devlink_port *port, +struct netlink_ext_ack *extack) +{ +struct ice_dynamic_port *dyn_port; + + dyn_port =ice_devlink_port_to_dyn (port); +ice_dealloc_dynamic_port (dyn_port); + +return 0 ; +} + +/** +* ice_devlink_port_fn_hw_addr_set - devlink handler for mac address set +* @port: pointer to devlink port +* @hw_addr: hw address to set +* @hw_addr_len: hw address length +* @extack: extack for reporting error messages +* +* Sets mac address for the port, verifies arguments and copies address +* to the subfunction structure. +* +* Return: zero on success or an error code on failure. +*/ +static int +ice_devlink_port_fn_hw_addr_set (struct devlink_port *port,const u8 *hw_addr, +int hw_addr_len, +struct netlink_ext_ack *extack) +{ +struct ice_dynamic_port *dyn_port; + + dyn_port =ice_devlink_port_to_dyn (port); + +if (hw_addr_len !=ETH_ALEN || !is_valid_ether_addr (hw_addr)) {
Quoted 9 lines
drivers/net/ethernet/intel/ice/devlink/devlink_port.c void ice_devlink_destroy_vf_port(struct ice_vf *vf) · line 593
Quoted 6 lines
drivers/net/ethernet/intel/ice/devlink/devlink_port.c +6
-0+NL_SET_ERR_MSG_MOD (extack,"Invalid ethernet address" ); +return -EADDRNOTAVAIL ; + } + +if (ether_addr_equal (dyn_port->hw_addr, hw_addr)) { +NL_SET_ERR_MSG_MOD (extack,"Address already set" );Is this message necessary? It will print out a warning for user.
Right, will remove the message.
Quoted 89 lines
Quoted 89 lines
drivers/net/ethernet/intel/ice/devlink/devlink_port.c +88
-0+return 0 ; + } + +ether_addr_copy (dyn_port->hw_addr, hw_addr); + +return 0 ; +} + +/** +* ice_devlink_port_fn_hw_addr_get - devlink handler for mac address get +* @port: pointer to devlink port +* @hw_addr: hw address to set +* @hw_addr_len: hw address length +* @extack: extack for reporting error messages +* +* Returns mac address for the port. +* +* Return: zero on success or an error code on failure. +*/ +static int +ice_devlink_port_fn_hw_addr_get (struct devlink_port *port,u8 *hw_addr, +int *hw_addr_len, +struct netlink_ext_ack *extack) +{ +struct ice_dynamic_port *dyn_port; + + dyn_port =ice_devlink_port_to_dyn (port); + +ether_addr_copy (hw_addr, dyn_port->hw_addr); + *hw_addr_len =ETH_ALEN ; + +return 0 ; +} + +/** +* ice_devlink_port_fn_state_set - devlink handler for port state set +* @port: pointer to devlink port +* @state: state to set +* @extack: extack for reporting error messages +* +* Activates or deactivates the port. +* +* Return: zero on success or an error code on failure. +*/ +static int +ice_devlink_port_fn_state_set (struct devlink_port *port, +enum devlink_port_fn_state state, +struct netlink_ext_ack *extack) +{ +struct ice_dynamic_port *dyn_port; + + dyn_port =ice_devlink_port_to_dyn (port); + +switch (state) { +case DEVLINK_PORT_FN_STATE_ACTIVE : +if (!dyn_port->active) +return ice_activate_dynamic_port (dyn_port, extack); +break ; +case DEVLINK_PORT_FN_STATE_INACTIVE : +if (dyn_port->active) +ice_deactivate_dynamic_port (dyn_port); +break ; + } + +return 0 ; +} + +/** +* ice_devlink_port_fn_state_get - devlink handler for port state get +* @port: pointer to devlink port +* @state: admin configured state of the port +* @opstate: current port operational state +* @extack: extack for reporting error messages +* +* Gets port state. +* +* Return: zero on success or an error code on failure. +*/ +static int +ice_devlink_port_fn_state_get (struct devlink_port *port, +enum devlink_port_fn_state *state, +enum devlink_port_fn_opstate *opstate, +struct netlink_ext_ack *extack) +{ +struct ice_dynamic_port *dyn_port; + + dyn_port =ice_devlink_port_to_dyn (port); +
Quoted 9 lines
drivers/net/ethernet/intel/ice/devlink/devlink_port.c void ice_devlink_destroy_vf_port(struct ice_vf *vf) · line 684
Quoted 3 lines
drivers/net/ethernet/intel/ice/devlink/devlink_port.c +3
-0+if (dyn_port->active) { + *state =DEVLINK_PORT_FN_STATE_ACTIVE ; + *opstate =DEVLINK_PORT_FN_OPSTATE_ATTACHED ;Interesting. This means that you don't distinguish between admin state and operational state. Meaning, when user does activate, you atomically achive the hw attachment and it is ready to go before activation cmd returns, correct? I'm just making sure I understand the code.
I am setting the dyn_port->active after the activation heppens, so it is true, when active is set it is ready to go.
Do you mean that dyn_port->active should be set even before the activation is finished? I mean when user only call devlink to active the port?
Quoted 118 lines
Quoted 118 lines
drivers/net/ethernet/intel/ice/devlink/devlink_port.c +117
-0+ }else { + *state =DEVLINK_PORT_FN_STATE_INACTIVE ; + *opstate =DEVLINK_PORT_FN_OPSTATE_DETACHED ; + } + +return 0 ; +} + +static const struct devlink_port_ops ice_devlink_port_sf_ops = { + .port_del = ice_devlink_port_del, + .port_fn_hw_addr_get = ice_devlink_port_fn_hw_addr_get, + .port_fn_hw_addr_set = ice_devlink_port_fn_hw_addr_set, + .port_fn_state_get = ice_devlink_port_fn_state_get, + .port_fn_state_set = ice_devlink_port_fn_state_set, +}; + +/** +* ice_reserve_sf_num - Reserve a subfunction number for this port +* @pf: pointer to the pf structure +* @new_attr: devlink port attributes requested +* @extack: extack for reporting error messages +* @sfnum: on success, the sf number reserved +* +* Reserve a subfunction number for this port. Only called for +* DEVLINK_PORT_FLAVOUR_PCI_SF ports. +* +* Return: zero on success or an error code on failure. +*/ +static int +ice_reserve_sf_num (struct ice_pf *pf, +const struct devlink_port_new_attrs *new_attr, +struct netlink_ext_ack *extack,u32 *sfnum) +{ +int err; + +/* If user didn't request an explicit number, pick one */ +if (!new_attr->sfnum_valid) +return xa_alloc (&pf->sf_nums, sfnum,NULL , xa_limit_32b, +GFP_KERNEL ); + +/* Otherwise, check and use the number provided */ + err =xa_insert (&pf->sf_nums, new_attr->sfnum,NULL ,GFP_KERNEL ); +if (err) { +if (err == -EBUSY ) +NL_SET_ERR_MSG_MOD (extack,"Subfunction with given sfnum already exists" ); +return err; + } + + *sfnum = new_attr->sfnum; + +return 0 ; +} + +/** +* ice_devlink_create_sf_port - Register PCI subfunction devlink port +* @dyn_port: the dynamic port instance structure for this subfunction +* @sfnum: the subfunction number to use for the port +* +* Register PCI subfunction flavour devlink port for a dynamically added +* subfunction port. +* +* Return: zero on success or an error code on failure. +*/ +static int +ice_devlink_create_sf_port (struct ice_dynamic_port *dyn_port,u32 sfnum) +{ +struct devlink_port_attrs attrs = {}; +struct devlink_port *devlink_port; +struct devlink *devlink; +struct ice_vsi *vsi; +struct device *dev; +struct ice_pf *pf; +int err; + + vsi = dyn_port->vsi; + pf = dyn_port->pf; + dev =ice_pf_to_dev (pf); + + devlink_port = &dyn_port->devlink_port; + + attrs.flavour =DEVLINK_PORT_FLAVOUR_PCI_SF ; + attrs.pci_sf.pf = pf->hw.bus.func; + attrs.pci_sf.sf = sfnum; + +devlink_port_attrs_set (devlink_port, &attrs); + devlink =priv_to_devlink (pf); + + err =devl_port_register_with_ops (devlink, devlink_port, vsi->idx, + &ice_devlink_port_sf_ops); +if (err) { +dev_err (dev,"Failed to create devlink port for Subfunction %d" , + vsi->idx); +return err; + } + +return 0 ; +} + +/** +* ice_alloc_dynamic_port - Allocate new dynamic port +* @pf: pointer to the pf structure +* @new_attr: devlink port attributes requested +* @extack: extack for reporting error messages +* @devlink_port: index of newly created devlink port +* +* Allocate a new dynamic port instance and prepare it for configuration +* with devlink. +* +* Return: zero on success or an error code on failure. +*/ +static int +ice_alloc_dynamic_port (struct ice_pf *pf, +const struct devlink_port_new_attrs *new_attr, +struct netlink_ext_ack *extack, +struct devlink_port **devlink_port) +{ +struct ice_dynamic_port *dyn_port;
Quoted 9 lines
drivers/net/ethernet/intel/ice/devlink/devlink_port.c void ice_devlink_destroy_vf_port(struct ice_vf *vf) · line 806
Quoted 5 lines
drivers/net/ethernet/intel/ice/devlink/devlink_port.c +5
-0+struct ice_vsi *vsi; +u32 sfnum; +int err; + +if (new_attr->flavour ==DEVLINK_PORT_FLAVOUR_PCI_SF ) {Pointless check, this is already sanitized in
ice_devlink_port_new_check_attr()
Sorry, probably you pointed this out previously and I forgot to remove the check. It will be fixed in next version.
Quoted 42 lines
Quoted 42 lines
drivers/net/ethernet/intel/ice/devlink/devlink_port.c +41
-0+ err =ice_reserve_sf_num (pf, new_attr, extack, &sfnum); +if (err) +return err; + } + + dyn_port =kzalloc (sizeof (*dyn_port),GFP_KERNEL ); +if (!dyn_port) { + err = -ENOMEM ; + goto unroll_reserve_sf_num; + } + + vsi =ice_vsi_alloc (pf); +if (!vsi) { +NL_SET_ERR_MSG_MOD (extack,"Unable to allocate VSI" ); + err = -ENOMEM ; + goto unroll_dyn_port_alloc; + } + + dyn_port->vsi = vsi; + dyn_port->pf = pf; +eth_random_addr (dyn_port->hw_addr); + + err =xa_insert (&pf->dyn_ports, vsi->idx, dyn_port,GFP_KERNEL ); +if (err) { +NL_SET_ERR_MSG_MOD (extack,"Port index reservation failed" ); + goto unroll_vsi_alloc; + } + + err =ice_devlink_create_sf_port (dyn_port, sfnum); +if (err) { +NL_SET_ERR_MSG_MOD (extack,"Port registration failed" ); + goto unroll_xa_insert; + } + + *devlink_port = &dyn_port->devlink_port; + +return 0 ; + +unroll_xa_insert: +xa_erase (&pf->dyn_ports, vsi->idx); +unroll_vsi_alloc:
Quoted 9 lines
drivers/net/ethernet/intel/ice/devlink/devlink_port.c void ice_devlink_destroy_vf_port(struct ice_vf *vf) · line 852
Quoted 5 lines
drivers/net/ethernet/intel/ice/devlink/devlink_port.c +5
-0+ice_vsi_free (vsi); +unroll_dyn_port_alloc: +kfree (dyn_port); +unroll_reserve_sf_num: +if (new_attr->flavour ==DEVLINK_PORT_FLAVOUR_PCI_SF )Pointless check, this is already sanitized in
ice_devlink_port_new_check_attr()
Will fix.
Quoted 58 lines
Quoted 46 lines
drivers/net/ethernet/intel/ice/devlink/devlink_port.c +32
-0+xa_erase (&pf->sf_nums, sfnum); + +return err; +} + +/** +* ice_devlink_port_new - devlink handler for the new port +* @devlink: pointer to devlink +* @new_attr: pointer to the port new attributes +* @extack: extack for reporting error messages +* @devlink_port: pointer to a new port +* +* Creates new devlink port, checks new port attributes and reject +* any unsupported parameters, allocates new subfunction for that port. +* +* Return: zero on success or an error code on failure. +*/ +int +ice_devlink_port_new (struct devlink *devlink, +const struct devlink_port_new_attrs *new_attr, +struct netlink_ext_ack *extack, +struct devlink_port **devlink_port) +{ +struct ice_pf *pf =devlink_priv (devlink); +int err; + + err =ice_devlink_port_new_check_attr (pf, new_attr, extack); +if (err) +return err; + +return ice_alloc_dynamic_port (pf, new_attr, extack, devlink_port); +}drivers/net/ethernet/intel/ice/devlink/devlink_port.h +5
-0@@ -4,9 +4,39 @@#ifndef _DEVLINK_PORT_H_#define _DEVLINK_PORT_H_ +#include "../ice.h" + +/** +* struct ice_dynamic_port - Track dynamically added devlink port instance +* @hw_addr: the HW address for this port drivers/net/ethernet/intel/ice/devlink/devlink_port.h line 21
Quoted 10 lines
drivers/net/ethernet/intel/ice/devlink/devlink_port.h +10
-0+* @active: true if the port has been activated +* @devlink_port: the associated devlink port structure +* @pf: pointer to the PF private structure +* @vsi: the VSI associated with this port +* +* An instance of a dynamically added devlink port. Each port flavour +*/ +struct ice_dynamic_port { +u8 hw_addr[ETH_ALEN ]; +u8 active :1 ;Hmm, odd whitespace to my eye. Shouldn't this be:
Quoted 2 lines
u8 active: 1;?
Agree, will fix.
Quoted 134 lines
Quoted 134 lines
drivers/net/ethernet/intel/ice/devlink/devlink_port.h +15
-0+struct devlink_port devlink_port; +struct ice_pf *pf; + struct ice_vsi *vsi; +}; + +void ice_dealloc_all_dynamic_ports (struct ice_pf *pf); +int ice_devlink_create_pf_port (struct ice_pf *pf);void ice_devlink_destroy_pf_port (struct ice_pf *pf);int ice_devlink_create_vf_port (struct ice_vf *vf);void ice_devlink_destroy_vf_port (struct ice_vf *vf); +#define ice_devlink_port_to_dyn (p) \ + container_of(port, struct ice_dynamic_port, devlink_port) + +int +ice_devlink_port_new (struct devlink *devlink, +const struct devlink_port_new_attrs *new_attr, +struct netlink_ext_ack *extack, +struct devlink_port **devlink_port);#endif /* _DEVLINK_PORT_H_ */ drivers/net/ethernet/intel/ice/ice.h +4
-0@@ -649,6 +649,9 @@ struct ice_pf {struct ice_eswitch eswitch;struct ice_esw_br_port *br_port; +struct xarray dyn_ports; +struct xarray sf_nums; +#define ICE_INVALID_AGG_NODE_ID 0#define ICE_PF_AGG_NODE_ID_START 1#define ICE_MAX_PF_AGG_NODES 32@@ -905,6 +908,7 @@ int ice_vsi_open(struct ice_vsi *vsi);void ice_set_ethtool_ops (struct net_device *netdev);void ice_set_ethtool_repr_ops (struct net_device *netdev);void ice_set_ethtool_safe_mode_ops (struct net_device *netdev); +void ice_set_ethtool_sf_ops (struct net_device *netdev);u16 ice_get_avail_txq_count (struct ice_pf *pf);u16 ice_get_avail_rxq_count (struct ice_pf *pf);int ice_vsi_recfg_qs (struct ice_vsi *vsi,int new_rx,int new_tx,bool locked);drivers/net/ethernet/intel/ice/ice_lib.c +3
-2@@ -7,6 +7,7 @@#include "ice_lib.h" #include "ice_fltr.h" #include "ice_dcb_lib.h" +#include "ice_type.h" #include "ice_vsi_vlan_ops.h" /** @@ -440,7 +441,7 @@ static int ice_vsi_alloc_ring_stats(struct ice_vsi *vsi)* This deallocates the VSI's queue resources, removes it from the PF's * VSI array if necessary, and deallocates the VSI */ -static void ice_vsi_free (struct ice_vsi *vsi) +void ice_vsi_free (struct ice_vsi *vsi) {struct ice_pf *pf =NULL ;struct device *dev;@@ -612,7 +613,7 @@ ice_vsi_alloc_def(struct ice_vsi *vsi, struct ice_channel *ch)* * returns a pointer to a VSI on success, NULL on failure. */ -static struct ice_vsi *ice_vsi_alloc (struct ice_pf *pf) +struct ice_vsi *ice_vsi_alloc (struct ice_pf *pf) {struct device *dev =ice_pf_to_dev (pf);struct ice_vsi *vsi =NULL ;drivers/net/ethernet/intel/ice/ice_lib.h +2
-0@@ -103,6 +103,8 @@ void ice_dis_vsi(struct ice_vsi *vsi, bool locked);int ice_vsi_rebuild (struct ice_vsi *vsi,u32 vsi_flags);int ice_vsi_cfg (struct ice_vsi *vsi,struct ice_vsi_cfg_params *params); +struct ice_vsi *ice_vsi_alloc (struct ice_pf *pf); +void ice_vsi_free (struct ice_vsi *vsi);bool ice_is_reset_in_progress (unsigned long *state);int ice_wait_for_reset (struct ice_pf *pf,unsigned long timeout);drivers/net/ethernet/intel/ice/ice_main.c +9
-1@@ -3964,6 +3964,9 @@ static void ice_deinit_pf(struct ice_pf *pf)if (pf->ptp.clock)ptp_clock_unregister (pf->ptp.clock); + +xa_destroy (&pf->dyn_ports); +xa_destroy (&pf->sf_nums); }/** @@ -4057,6 +4060,9 @@ static int ice_init_pf(struct ice_pf *pf)hash_init (pf->vfs.table);ice_mbx_init_snapshot (&pf->hw); +xa_init (&pf->dyn_ports); +xa_init (&pf->sf_nums); +return 0 ; }@@ -5376,6 +5382,7 @@ static void ice_remove(struct pci_dev *pdev)ice_remove_arfs (pf);devl_lock (priv_to_devlink (pf)); +ice_dealloc_all_dynamic_ports (pf);ice_deinit_devlink (pf);ice_unload (pf);@@ -6670,7 +6677,8 @@ static int ice_up_complete(struct ice_vsi *vsi)if (vsi->port_info && (vsi->port_info->phy.link_info.link_info &ICE_AQ_LINK_UP ) && - vsi->netdev && vsi->type ==ICE_VSI_PF ) { + ((vsi->netdev && vsi->type ==ICE_VSI_PF ) || + (vsi->netdev && vsi->type ==ICE_VSI_SF ))) {ice_print_link_msg (vsi, true);netif_tx_start_all_queues (vsi->netdev);netif_carrier_on (vsi->netdev);@@ -7368,7 +7376,7 @@ int ice_vsi_open(struct ice_vsi *vsi)ice_vsi_cfg_netdev_tc (vsi, vsi->tc_cfg.ena_tc);
Quoted 9 lines
drivers/net/ethernet/intel/ice/ice_main.c int ice_vsi_open(struct ice_vsi *vsi) · line 7382
Quoted 5 lines
drivers/net/ethernet/intel/ice/ice_main.c +1
-1-if (vsi->type ==ICE_VSI_PF ) { +if (vsi->type ==ICE_VSI_PF || vsi->type ==ICE_VSI_SF ) {/* Notify the stack of the actual queue counts. */ err =netif_set_real_num_tx_queues (vsi->netdev, vsi->num_txq);if (err)These 2 last hunks seem somewhat disconnected from the rest of the patch. Could that be a separate patch perhaps?
Ok, will split it.
Thanks for carefully review,
Michal
Quoted 5 lines
Quoted 5 lines
Signature · 2 lines
-- 2.42.0
Re: [iwl-next v3 3/7] ice: add basic devlink subfunctions support
Quoted 3 lines · Mon, Apr 15, 2024 at 10:39:39AM CEST, [email protected] wrote:
Quoted 2 lines · Jiri Pirko
Quoted 1 line · Fri, Apr 12, 2024 at 08:30:49AM CEST, [email protected] wrote:
From: Piotr Raczynski <[email protected]>
[...]
Quoted 20 lines
Quoted 10 lines
Quoted 10 lines
drivers/net/ethernet/intel/ice/devlink/devlink_port.c +10
-0+static int +ice_devlink_port_fn_state_get (struct devlink_port *port, +enum devlink_port_fn_state *state, +enum devlink_port_fn_opstate *opstate, +struct netlink_ext_ack *extack) +{ +struct ice_dynamic_port *dyn_port; + + dyn_port =ice_devlink_port_to_dyn (port); +Quoted 9 lines
drivers/net/ethernet/intel/ice/devlink/devlink_port.c void ice_devlink_destroy_vf_port(struct ice_vf *vf) · line 684
Quoted 3 lines
drivers/net/ethernet/intel/ice/devlink/devlink_port.c +3
-0+if (dyn_port->active) { + *state =DEVLINK_PORT_FN_STATE_ACTIVE ; + *opstate =DEVLINK_PORT_FN_OPSTATE_ATTACHED ;Interesting. This means that you don't distinguish between admin state and operational state. Meaning, when user does activate, you atomically achive the hw attachment and it is ready to go before activation cmd returns, correct? I'm just making sure I understand the code.
Quoted 5 lines
I am setting the
dyn_port->activeafter the activation heppens, so it is true, when active is set it is ready to go.Do you mean that
dyn_port->activeshould be set even before the activation is finished? I mean when user only call devlink to active the port?
The devlink instance lock is taken the whole time, isn't it?
Quoted 10 lines
Quoted 10 lines
Quoted 10 lines
drivers/net/ethernet/intel/ice/devlink/devlink_port.c +8
-0+ }else { + *state =DEVLINK_PORT_FN_STATE_INACTIVE ; + *opstate =DEVLINK_PORT_FN_OPSTATE_DETACHED ; + } + +return 0 ; +} +
[...]
Re: [iwl-next v3 3/7] ice: add basic devlink subfunctions support
Quoted 27 lines · Jiri Pirko
Quoted 3 lines · Mon, Apr 15, 2024 at 10:39:39AM CEST, [email protected] wrote:
Quoted 2 lines · Jiri Pirko
Quoted 1 line · Fri, Apr 12, 2024 at 08:30:49AM CEST, [email protected] wrote:
From: Piotr Raczynski <[email protected]>
[...]
Quoted 20 lines
Quoted 19 lines
drivers/net/ethernet/intel/ice/devlink/devlink_port.c void ice_devlink_destroy_vf_port(struct ice_vf *vf) · line 684
Quoted 13 lines
drivers/net/ethernet/intel/ice/devlink/devlink_port.c +13
-0+static int +ice_devlink_port_fn_state_get (struct devlink_port *port, +enum devlink_port_fn_state *state, +enum devlink_port_fn_opstate *opstate, +struct netlink_ext_ack *extack) +{ +struct ice_dynamic_port *dyn_port; + + dyn_port =ice_devlink_port_to_dyn (port); + +if (dyn_port->active) { + *state =DEVLINK_PORT_FN_STATE_ACTIVE ; + *opstate =DEVLINK_PORT_FN_OPSTATE_ATTACHED ;Interesting. This means that you don't distinguish between admin state and operational state. Meaning, when user does activate, you atomically achive the hw attachment and it is ready to go before activation cmd returns, correct? I'm just making sure I understand the code.
Quoted 8 lines
Quoted 5 lines
I am setting the
dyn_port->activeafter the activation heppens, so it is true, when active is set it is ready to go.Do you mean that
dyn_port->activeshould be set even before the activation is finished? I mean when user only call devlink to active the port?The devlink instance lock is taken the whole time, isn't it?
I don't take PF devlink lock here. Only subfunction devlink lock is taken during the initialization of subfunction.
Quoted 12 lines
Quoted 10 lines
Quoted 10 lines
Quoted 10 lines
drivers/net/ethernet/intel/ice/devlink/devlink_port.c +8
-0+ }else { + *state =DEVLINK_PORT_FN_STATE_INACTIVE ; + *opstate =DEVLINK_PORT_FN_OPSTATE_DETACHED ; + } + +return 0 ; +} +[...]
Re: [Intel-wired-lan] [iwl-next v3 3/7] ice: add basic devlink subfunctions support
Quoted 31 lines · Michal Swiatkowski
Quoted 30 lines · Jiri Pirko
Quoted 3 lines · Mon, Apr 15, 2024 at 10:39:39AM CEST, [email protected] wrote:
Quoted 2 lines · Jiri Pirko
Quoted 1 line · Fri, Apr 12, 2024 at 08:30:49AM CEST, [email protected] wrote:
From: Piotr Raczynski <[email protected]>
[...]
Quoted 23 lines
Quoted 10 lines
Quoted 10 lines
drivers/net/ethernet/intel/ice/devlink/devlink_port.c +10
-0+static int +ice_devlink_port_fn_state_get (struct devlink_port *port, +enum devlink_port_fn_state *state, +enum devlink_port_fn_opstate *opstate, +struct netlink_ext_ack *extack) +{ +struct ice_dynamic_port *dyn_port; + + dyn_port =ice_devlink_port_to_dyn (port); +Quoted 9 lines
drivers/net/ethernet/intel/ice/devlink/devlink_port.c void ice_devlink_destroy_vf_port(struct ice_vf *vf) · line 684
Quoted 3 lines
drivers/net/ethernet/intel/ice/devlink/devlink_port.c +3
-0+if (dyn_port->active) { + *state =DEVLINK_PORT_FN_STATE_ACTIVE ; + *opstate =DEVLINK_PORT_FN_OPSTATE_ATTACHED ;Interesting. This means that you don't distinguish between admin state and operational state. Meaning, when user does activate, you atomically achive the hw attachment and it is ready to go before activation cmd returns, correct? I'm just making sure I understand the code.
I am setting the
dyn_port->activeafter the activation heppens, so it is true, when active is set it is ready to go.
Quoted 9 lines
Quoted 5 lines
Quoted 2 lines
Do you mean that
dyn_port->activeshould be set even before the activation is finished? I mean when user only call devlink to active the port?The devlink instance lock is taken the whole time, isn't it?
I don't take PF devlink lock here. Only subfunction devlink lock is taken during the initialization of subfunction.
Did you mean that the devlink lock is taken for DEVLINK_CMD_PORT_SET/GET command? In this case, I think so, it is for the whole time of the command execution.
Sorry I probably missed the point.
Quoted 12 lines
Quoted 12 lines
Quoted 10 lines
Quoted 10 lines
Quoted 10 lines
drivers/net/ethernet/intel/ice/devlink/devlink_port.c +8
-0+ }else { + *state =DEVLINK_PORT_FN_STATE_INACTIVE ; + *opstate =DEVLINK_PORT_FN_OPSTATE_DETACHED ; + } + +return 0 ; +} +[...]
Re: [Intel-wired-lan] [iwl-next v3 3/7] ice: add basic devlink subfunctions support
Quoted 38 lines · Tue, Apr 16, 2024 at 08:16:17AM CEST, [email protected] wrote:
Quoted 37 lines · Michal Swiatkowski
Quoted 35 lines · Jiri Pirko
Quoted 3 lines · Mon, Apr 15, 2024 at 10:39:39AM CEST, [email protected] wrote:
Quoted 2 lines · Jiri Pirko
Quoted 1 line · Fri, Apr 12, 2024 at 08:30:49AM CEST, [email protected] wrote:
From: Piotr Raczynski <[email protected]>
[...]
Quoted 20 lines
Quoted 10 lines
Quoted 10 lines
drivers/net/ethernet/intel/ice/devlink/devlink_port.c +10
-0+static int +ice_devlink_port_fn_state_get (struct devlink_port *port, +enum devlink_port_fn_state *state, +enum devlink_port_fn_opstate *opstate, +struct netlink_ext_ack *extack) +{ +struct ice_dynamic_port *dyn_port; + + dyn_port =ice_devlink_port_to_dyn (port); +Quoted 9 lines
drivers/net/ethernet/intel/ice/devlink/devlink_port.c void ice_devlink_destroy_vf_port(struct ice_vf *vf) · line 684
Quoted 3 lines
drivers/net/ethernet/intel/ice/devlink/devlink_port.c +3
-0+if (dyn_port->active) { + *state =DEVLINK_PORT_FN_STATE_ACTIVE ; + *opstate =DEVLINK_PORT_FN_OPSTATE_ATTACHED ;Interesting. This means that you don't distinguish between admin state and operational state. Meaning, when user does activate, you atomically achive the hw attachment and it is ready to go before activation cmd returns, correct? I'm just making sure I understand the code.
Quoted 5 lines
I am setting the
dyn_port->activeafter the activation heppens, so it is true, when active is set it is ready to go.Do you mean that
dyn_port->activeshould be set even before the activation is finished? I mean when user only call devlink to active the port?The devlink instance lock is taken the whole time, isn't it?
Quoted 7 lines
Quoted 3 lines
I don't take PF devlink lock here. Only subfunction devlink lock is taken during the initialization of subfunction.
Did you mean that the devlink lock is taken for DEVLINK_CMD_PORT_SET/GET command? In this case, I think so, it is for the whole time of the command execution.
Yes.
Quoted 2 lines
Sorry I probably missed the point.
Np.
Quoted 13 lines
Quoted 13 lines
Quoted 13 lines
Quoted 11 lines
Quoted 11 lines
Quoted 11 lines
drivers/net/ethernet/intel/ice/devlink/devlink_port.c +8
-0+ }else { + *state =DEVLINK_PORT_FN_STATE_INACTIVE ; + *opstate =DEVLINK_PORT_FN_OPSTATE_DETACHED ; + } + +return 0 ; +} +[...]
PATCH v3 4/7 ice: allocate devlink for subfunction
In reply to Michal SwiatkowskiFrom: Piotr Raczynski <[email protected]>
Make devlink allocation function generic to use it for PF and for SF.
Add function for SF devlink port creation. It will be used in next patch.
Create header file for subfunction device. Define subfunction device structure there as it is needed for devlink allocation and port creation.
--- .../net/ethernet/intel/ice/devlink/devlink.c | 47 ++++++++++++++--- .../net/ethernet/intel/ice/devlink/devlink.h | 1 + .../ethernet/intel/ice/devlink/devlink_port.c | 51 +++++++++++++++++++ .../ethernet/intel/ice/devlink/devlink_port.h | 3 ++ drivers/net/ethernet/intel/ice/ice_sf_eth.h | 21 ++++++++ 5 files changed, 117 insertions(+), 6 deletions(-) create mode 100644 drivers/net/ethernet/intel/ice/ice_sf_eth.h
drivers/net/ethernet/intel/ice/devlink/devlink.c +41 -6
@@ -10,6 +10,7 @@#include "ice_eswitch.h" #include "ice_fw_update.h" #include "ice_dcb_lib.h" +#include "ice_sf_eth.h" /* context for devlink info version reporting */ struct ice_info_ctx {
@@ -1286,6 +1287,8 @@ static const struct devlink_ops ice_devlink_ops = { .port_new = ice_devlink_port_new, }; +static const struct devlink_ops ice_sf_devlink_ops; +static int ice_devlink_enable_roce_get (struct devlink *devlink,u32 id,struct devlink_param_gset_ctx *ctx)
@@ -1417,18 +1420,23 @@ static void ice_devlink_free(void *devlink_ptr) }/** -* ice_allocate_pf - Allocate devlink and return PF structure pointer +* ice_devlink_alloc - Allocate devlink and return devlink priv pointer * @dev: the device to allocate for +* @priv_size: size of the priv memory +* @ops: pointer to devlink ops for this device +* +* Allocate a devlink instance for this device and return the private pointer +* The devlink memory is kept track of through devres by adding an action to +* remove it when unwinding. * -* Allocate a devlink instance for this device and return the private area as -* the PF structure. The devlink memory is kept track of through devres by -* adding an action to remove it when unwinding. +* Return: void pointer to allocated memory */ -struct ice_pf *ice_allocate_pf (struct device *dev) +static void *ice_devlink_alloc (struct device *dev,size_t priv_size, +const struct devlink_ops *ops) {struct devlink *devlink; - devlink =devlink_alloc (&ice_devlink_ops,sizeof (struct ice_pf ), dev); + devlink =devlink_alloc (ops, priv_size, dev);if (!devlink)return NULL ;
@@ -1439,6 +1447,33 @@ struct ice_pf *ice_allocate_pf(struct device *dev)return devlink_priv (devlink); } +/** +* ice_allocate_pf - Allocate devlink and return PF structure pointer +* @dev: the device to allocate for +* +* Allocate a devlink instance for PF. +* +* Return: void pointer to allocated memory +*/ +struct ice_pf *ice_allocate_pf (struct device *dev) +{ +return ice_devlink_alloc (dev,sizeof (struct ice_pf ), &ice_devlink_ops); +} + +/** +* ice_allocate_sf - Allocate devlink and return SF structure pointer +* @dev: the device to allocate for +* +* Allocate a devlink instance for SF. +* +* Return: void pointer to allocated memory +*/ +struct ice_sf_priv *ice_allocate_sf (struct device *dev) +{ +return ice_devlink_alloc (dev,sizeof (struct ice_sf_priv ), + &ice_sf_devlink_ops); +} +/** * ice_devlink_register - Register devlink interface for this PF * @pf: the PF to register the devlink for.
drivers/net/ethernet/intel/ice/devlink/devlink.h +1 -0
@@ -5,6 +5,7 @@#define _ICE_DEVLINK_H_struct ice_pf *ice_allocate_pf (struct device *dev); +struct ice_sf_priv *ice_allocate_sf (struct device *dev);void ice_devlink_register (struct ice_pf *pf);void ice_devlink_unregister (struct ice_pf *pf);
drivers/net/ethernet/intel/ice/devlink/devlink_port.c +51 -0
57 lines not on this page · raw message
drivers/net/ethernet/intel/ice/devlink/devlink_port.h +3 -0
@@ -5,6 +5,7 @@#define _DEVLINK_PORT_H_#include "../ice.h" +#include "ice_sf_eth.h" /** * struct ice_dynamic_port - Track dynamically added devlink port instance
@@ -30,6 +31,8 @@ int ice_devlink_create_pf_port(struct ice_pf *pf);void ice_devlink_destroy_pf_port (struct ice_pf *pf);int ice_devlink_create_vf_port (struct ice_vf *vf);void ice_devlink_destroy_vf_port (struct ice_vf *vf); +int ice_devlink_create_sf_dev_port (struct ice_sf_dev *sf_dev); +void ice_devlink_destroy_sf_dev_port (struct ice_sf_dev *sf_dev);#define ice_devlink_port_to_dyn (p) \ container_of(port, struct ice_dynamic_port, devlink_port)
drivers/net/ethernet/intel/ice/ice_sf_eth.h new file +21 -0
@@ -0,0 +1,21 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* Copyright (c) 2024, Intel Corporation. */ + +#ifndef _ICE_SF_ETH_H_ +#define _ICE_SF_ETH_H_ + +#include <linux/auxiliary_bus.h> +#include "ice.h" + +struct ice_sf_dev { +struct auxiliary_device adev; +struct ice_dynamic_port *dyn_port; +struct ice_sf_priv *priv; +}; + +struct ice_sf_priv { +struct ice_sf_dev *dev; +struct devlink_port devlink_port; +}; + +#endif /* _ICE_SF_ETH_H_ */
Signature · 1 line
2.42.0
Re: [iwl-next v3 4/7] ice: allocate devlink for subfunction
Quoted 153 lines · Fri, Apr 12, 2024 at 08:30:50AM CEST, [email protected] wrote:
From: Piotr Raczynski <[email protected]>
Make devlink allocation function generic to use it for PF and for SF.
Add function for SF devlink port creation. It will be used in next patch.
Create header file for subfunction device. Define subfunction device structure there as it is needed for devlink allocation and port creation.
Signed-off-by Piotr Raczynski <[email protected]>Signed-off-by Michal Swiatkowski <[email protected]>---
.../net/ethernet/intel/ice/devlink/devlink.c | 47 ++++++++++++++--- .../net/ethernet/intel/ice/devlink/devlink.h | 1 + .../ethernet/intel/ice/devlink/devlink_port.c | 51 +++++++++++++++++++ .../ethernet/intel/ice/devlink/devlink_port.h | 3 ++ drivers/net/ethernet/intel/ice/ice_sf_eth.h | 21 ++++++++ 5 files changed, 117 insertions(+), 6 deletions(-)create mode 100644
drivers/net/ethernet/intel/ice/ice_sf_eth.hdrivers/net/ethernet/intel/ice/devlink/devlink.c +3
-0@@ -10,6 +10,7 @@#include "ice_eswitch.h" #include "ice_fw_update.h" #include "ice_dcb_lib.h" +#include "ice_sf_eth.h" /* context for devlink info version reporting */ struct ice_info_ctx {@@ -1286,6 +1287,8 @@ static const struct devlink_ops ice_devlink_ops = { .port_new = ice_devlink_port_new, }; +static const struct devlink_ops ice_sf_devlink_ops; +static int
ice_devlink_enable_roce_get(struct devlink *devlink, u32 id,
structdevlink_param_gset_ctx*ctx)drivers/net/ethernet/intel/ice/devlink/devlink.c +38
-6@@ -1417,18 +1420,23 @@ static void ice_devlink_free(void *devlink_ptr) }/** -* ice_allocate_pf - Allocate devlink and return PF structure pointer +* ice_devlink_alloc - Allocate devlink and return devlink priv pointer * @dev: the device to allocate for +* @priv_size: size of the priv memory +* @ops: pointer to devlink ops for this device +* +* Allocate a devlink instance for this device and return the private pointer +* The devlink memory is kept track of through devres by adding an action to +* remove it when unwinding. * -* Allocate a devlink instance for this device and return the private area as -* the PF structure. The devlink memory is kept track of through devres by -* adding an action to remove it when unwinding. +* Return: void pointer to allocated memory */ -struct ice_pf *ice_allocate_pf (struct device *dev) +static void *ice_devlink_alloc (struct device *dev,size_t priv_size, +const struct devlink_ops *ops) {struct devlink *devlink; - devlink =devlink_alloc (&ice_devlink_ops,sizeof (struct ice_pf ), dev); + devlink =devlink_alloc (ops, priv_size, dev);if (!devlink)return NULL ;@@ -1439,6 +1447,33 @@ struct ice_pf *ice_allocate_pf(struct device *dev)return devlink_priv (devlink); } +/** +* ice_allocate_pf - Allocate devlink and return PF structure pointer +* @dev: the device to allocate for +* +* Allocate a devlink instance for PF. +* +* Return: void pointer to allocated memory +*/ +struct ice_pf *ice_allocate_pf (struct device *dev) +{ +return ice_devlink_alloc (dev,sizeof (struct ice_pf ), &ice_devlink_ops); +} + +/** +* ice_allocate_sf - Allocate devlink and return SF structure pointer +* @dev: the device to allocate for +* +* Allocate a devlink instance for SF. +* +* Return: void pointer to allocated memory +*/ +struct ice_sf_priv *ice_allocate_sf (struct device *dev) +{ +return ice_devlink_alloc (dev,sizeof (struct ice_sf_priv ), + &ice_sf_devlink_ops); +} +/** * ice_devlink_register - Register devlink interface for this PF * @pf: the PF to register the devlink for. drivers/net/ethernet/intel/ice/devlink/devlink.h +1
-0@@ -5,6 +5,7 @@#define _ICE_DEVLINK_H_struct ice_pf *ice_allocate_pf (struct device *dev); +struct ice_sf_priv *ice_allocate_sf (struct device *dev);void ice_devlink_register (struct ice_pf *pf);void ice_devlink_unregister (struct ice_pf *pf);drivers/net/ethernet/intel/ice/devlink/devlink_port.c +26
-0@@ -432,6 +432,57 @@ void ice_devlink_destroy_vf_port(struct ice_vf *vf)devlink_port_unregister (&vf->devlink_port); } +/** +* ice_devlink_create_sf_dev_port - Register virtual port for a subfunction +* @sf_dev: the subfunction device to create a devlink port for +* +* Register virtual flavour devlink port for the subfunction auxiliary device +* created after activating a dynamically added devlink port. +* +* Return: zero on success or an error code on failure. +*/ +int ice_devlink_create_sf_dev_port (struct ice_sf_dev *sf_dev) +{ +struct devlink_port_attrs attrs = {}; +struct devlink_port *devlink_port; +struct ice_dynamic_port *dyn_port; +struct devlink *devlink; +struct ice_vsi *vsi; +struct device *dev; +struct ice_pf *pf; +int err; + + dyn_port = sf_dev->dyn_port; + vsi = dyn_port->vsi; + pf = dyn_port->pf; + dev =ice_pf_to_dev (pf); + + devlink_port = &sf_dev->priv->devlink_port;
drivers/net/ethernet/intel/ice/devlink/devlink_port.c void ice_devlink_destroy_vf_port(struct ice_vf *vf) · line 470
Quoted 10 lines
drivers/net/ethernet/intel/ice/devlink/devlink_port.c +10
-0+ + attrs.flavour =DEVLINK_PORT_FLAVOUR_VIRTUAL ; + +devlink_port_attrs_set (devlink_port, &attrs); + devlink =priv_to_devlink (sf_dev->priv); + + err =devl_port_register (devlink, devlink_port, vsi->idx); +if (err) +dev_err (dev,"Failed to create virtual devlink port for auxiliary subfunction device %d" , + vsi->idx);
I wonder if the value of vsi->idx is any useful to the user. I guess he is not aware of it. Since this error happens upon user cmd active call, the identification is pointless. User know on which object he is working. Please remove.
Quoted 70 lines
drivers/net/ethernet/intel/ice/devlink/devlink_port.c +15
-0+ +return err; +} + +/** +* ice_devlink_destroy_sf_dev_port - Destroy virtual port for a subfunction +* @sf_dev: the subfunction device to create a devlink port for +* +* Unregisters the virtual port associated with this subfunction. +*/ +void ice_devlink_destroy_sf_dev_port (struct ice_sf_dev *sf_dev) +{ +devl_port_unregister (&sf_dev->priv->devlink_port); +} +/** * ice_activate_dynamic_port - Activate a dynamic port * @dyn_port: dynamic port instance to activate drivers/net/ethernet/intel/ice/devlink/devlink_port.h +3
-0@@ -5,6 +5,7 @@#define _DEVLINK_PORT_H_#include "../ice.h" +#include "ice_sf_eth.h" /** * struct ice_dynamic_port - Track dynamically added devlink port instance @@ -30,6 +31,8 @@ int ice_devlink_create_pf_port(struct ice_pf *pf);void ice_devlink_destroy_pf_port (struct ice_pf *pf);int ice_devlink_create_vf_port (struct ice_vf *vf);void ice_devlink_destroy_vf_port (struct ice_vf *vf); +int ice_devlink_create_sf_dev_port (struct ice_sf_dev *sf_dev); +void ice_devlink_destroy_sf_dev_port (struct ice_sf_dev *sf_dev);#define ice_devlink_port_to_dyn (p) \ container_of(port, struct ice_dynamic_port, devlink_port)drivers/net/ethernet/intel/ice/ice_sf_eth.h new file +21
-0@@ -0,0 +1,21 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* Copyright (c) 2024, Intel Corporation. */ + +#ifndef _ICE_SF_ETH_H_ +#define _ICE_SF_ETH_H_ + +#include <linux/auxiliary_bus.h> +#include "ice.h" + +struct ice_sf_dev { +struct auxiliary_device adev; +struct ice_dynamic_port *dyn_port; +struct ice_sf_priv *priv; +}; + +struct ice_sf_priv { +struct ice_sf_dev *dev; +struct devlink_port devlink_port; +}; + +#endif /* _ICE_SF_ETH_H_ */ Signature · 1 line
2.42.0
Re: [iwl-next v3 4/7] ice: allocate devlink for subfunction
Quoted 161 lines · Jiri Pirko
Quoted 160 lines · Fri, Apr 12, 2024 at 08:30:50AM CEST, [email protected] wrote:
From: Piotr Raczynski <[email protected]>
Make devlink allocation function generic to use it for PF and for SF.
Add function for SF devlink port creation. It will be used in next patch.
Create header file for subfunction device. Define subfunction device structure there as it is needed for devlink allocation and port creation.
Signed-off-by Piotr Raczynski <[email protected]>Signed-off-by Michal Swiatkowski <[email protected]>---
.../net/ethernet/intel/ice/devlink/devlink.c | 47 ++++++++++++++--- .../net/ethernet/intel/ice/devlink/devlink.h | 1 + .../ethernet/intel/ice/devlink/devlink_port.c | 51 +++++++++++++++++++ .../ethernet/intel/ice/devlink/devlink_port.h | 3 ++ drivers/net/ethernet/intel/ice/ice_sf_eth.h | 21 ++++++++ 5 files changed, 117 insertions(+), 6 deletions(-)create mode 100644
drivers/net/ethernet/intel/ice/ice_sf_eth.hdrivers/net/ethernet/intel/ice/devlink/devlink.c +3
-0@@ -10,6 +10,7 @@#include "ice_eswitch.h" #include "ice_fw_update.h" #include "ice_dcb_lib.h" +#include "ice_sf_eth.h" /* context for devlink info version reporting */ struct ice_info_ctx {@@ -1286,6 +1287,8 @@ static const struct devlink_ops ice_devlink_ops = { .port_new = ice_devlink_port_new, }; +static const struct devlink_ops ice_sf_devlink_ops; +static int
ice_devlink_enable_roce_get(struct devlink *devlink, u32 id,
structdevlink_param_gset_ctx*ctx)drivers/net/ethernet/intel/ice/devlink/devlink.c +38
-6@@ -1417,18 +1420,23 @@ static void ice_devlink_free(void *devlink_ptr) }/** -* ice_allocate_pf - Allocate devlink and return PF structure pointer +* ice_devlink_alloc - Allocate devlink and return devlink priv pointer * @dev: the device to allocate for +* @priv_size: size of the priv memory +* @ops: pointer to devlink ops for this device +* +* Allocate a devlink instance for this device and return the private pointer +* The devlink memory is kept track of through devres by adding an action to +* remove it when unwinding. * -* Allocate a devlink instance for this device and return the private area as -* the PF structure. The devlink memory is kept track of through devres by -* adding an action to remove it when unwinding. +* Return: void pointer to allocated memory */ -struct ice_pf *ice_allocate_pf (struct device *dev) +static void *ice_devlink_alloc (struct device *dev,size_t priv_size, +const struct devlink_ops *ops) {struct devlink *devlink; - devlink =devlink_alloc (&ice_devlink_ops,sizeof (struct ice_pf ), dev); + devlink =devlink_alloc (ops, priv_size, dev);if (!devlink)return NULL ;@@ -1439,6 +1447,33 @@ struct ice_pf *ice_allocate_pf(struct device *dev)return devlink_priv (devlink); } +/** +* ice_allocate_pf - Allocate devlink and return PF structure pointer +* @dev: the device to allocate for +* +* Allocate a devlink instance for PF. +* +* Return: void pointer to allocated memory +*/ +struct ice_pf *ice_allocate_pf (struct device *dev) +{ +return ice_devlink_alloc (dev,sizeof (struct ice_pf ), &ice_devlink_ops); +} + +/** +* ice_allocate_sf - Allocate devlink and return SF structure pointer +* @dev: the device to allocate for +* +* Allocate a devlink instance for SF. +* +* Return: void pointer to allocated memory +*/ +struct ice_sf_priv *ice_allocate_sf (struct device *dev) +{ +return ice_devlink_alloc (dev,sizeof (struct ice_sf_priv ), + &ice_sf_devlink_ops); +} +/** * ice_devlink_register - Register devlink interface for this PF * @pf: the PF to register the devlink for. drivers/net/ethernet/intel/ice/devlink/devlink.h +1
-0@@ -5,6 +5,7 @@#define _ICE_DEVLINK_H_struct ice_pf *ice_allocate_pf (struct device *dev); +struct ice_sf_priv *ice_allocate_sf (struct device *dev);void ice_devlink_register (struct ice_pf *pf);void ice_devlink_unregister (struct ice_pf *pf);drivers/net/ethernet/intel/ice/devlink/devlink_port.c +33
-0@@ -432,6 +432,57 @@ void ice_devlink_destroy_vf_port(struct ice_vf *vf)devlink_port_unregister (&vf->devlink_port); } +/** +* ice_devlink_create_sf_dev_port - Register virtual port for a subfunction +* @sf_dev: the subfunction device to create a devlink port for +* +* Register virtual flavour devlink port for the subfunction auxiliary device +* created after activating a dynamically added devlink port. +* +* Return: zero on success or an error code on failure. +*/ +int ice_devlink_create_sf_dev_port (struct ice_sf_dev *sf_dev) +{ +struct devlink_port_attrs attrs = {}; +struct devlink_port *devlink_port; +struct ice_dynamic_port *dyn_port; +struct devlink *devlink; +struct ice_vsi *vsi; +struct device *dev; +struct ice_pf *pf; +int err; + + dyn_port = sf_dev->dyn_port; + vsi = dyn_port->vsi; + pf = dyn_port->pf; + dev =ice_pf_to_dev (pf); + + devlink_port = &sf_dev->priv->devlink_port; + + attrs.flavour =DEVLINK_PORT_FLAVOUR_VIRTUAL ; + +devlink_port_attrs_set (devlink_port, &attrs); + devlink =priv_to_devlink (sf_dev->priv); + + err =devl_port_register (devlink, devlink_port, vsi->idx);
Quoted 9 lines
drivers/net/ethernet/intel/ice/devlink/devlink_port.c void ice_devlink_destroy_vf_port(struct ice_vf *vf) · line 470
Quoted 3 lines
drivers/net/ethernet/intel/ice/devlink/devlink_port.c +3
-0+if (err) +dev_err (dev,"Failed to create virtual devlink port for auxiliary subfunction device %d" , + vsi->idx);I wonder if the value of
vsi->idxis any useful to the user. I guess he is not aware of it. Since this error happens upon user cmd active call, the identification is pointless. User know on which object he is working. Please remove.
Right, will remove it.
Quoted 71 lines
Quoted 71 lines
drivers/net/ethernet/intel/ice/devlink/devlink_port.c +15
-0+ +return err; +} + +/** +* ice_devlink_destroy_sf_dev_port - Destroy virtual port for a subfunction +* @sf_dev: the subfunction device to create a devlink port for +* +* Unregisters the virtual port associated with this subfunction. +*/ +void ice_devlink_destroy_sf_dev_port (struct ice_sf_dev *sf_dev) +{ +devl_port_unregister (&sf_dev->priv->devlink_port); +} +/** * ice_activate_dynamic_port - Activate a dynamic port * @dyn_port: dynamic port instance to activate drivers/net/ethernet/intel/ice/devlink/devlink_port.h +3
-0@@ -5,6 +5,7 @@#define _DEVLINK_PORT_H_#include "../ice.h" +#include "ice_sf_eth.h" /** * struct ice_dynamic_port - Track dynamically added devlink port instance @@ -30,6 +31,8 @@ int ice_devlink_create_pf_port(struct ice_pf *pf);void ice_devlink_destroy_pf_port (struct ice_pf *pf);int ice_devlink_create_vf_port (struct ice_vf *vf);void ice_devlink_destroy_vf_port (struct ice_vf *vf); +int ice_devlink_create_sf_dev_port (struct ice_sf_dev *sf_dev); +void ice_devlink_destroy_sf_dev_port (struct ice_sf_dev *sf_dev);#define ice_devlink_port_to_dyn (p) \ container_of(port, struct ice_dynamic_port, devlink_port)drivers/net/ethernet/intel/ice/ice_sf_eth.h new file +21
-0@@ -0,0 +1,21 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* Copyright (c) 2024, Intel Corporation. */ + +#ifndef _ICE_SF_ETH_H_ +#define _ICE_SF_ETH_H_ + +#include <linux/auxiliary_bus.h> +#include "ice.h" + +struct ice_sf_dev { +struct auxiliary_device adev; +struct ice_dynamic_port *dyn_port; +struct ice_sf_priv *priv; +}; + +struct ice_sf_priv { +struct ice_sf_dev *dev; +struct devlink_port devlink_port; +}; + +#endif /* _ICE_SF_ETH_H_ */ Signature · 1 line
2.42.0
PATCH v3 5/7 ice: base subfunction aux driver
In reply to Michal SwiatkowskiFrom: Piotr Raczynski <[email protected]>
Implement subfunction driver. It is probe when subfunction port is activated.
VSI is already created. During the probe VSI is being configured. MAC unicast and broadcast filter is added to allow traffic to pass.
--- drivers/net/ethernet/intel/ice/Makefile | 1 + drivers/net/ethernet/intel/ice/ice_main.c | 10 ++ drivers/net/ethernet/intel/ice/ice_sf_eth.c | 130 ++++++++++++++++++++ drivers/net/ethernet/intel/ice/ice_sf_eth.h | 9 ++ 4 files changed, 150 insertions(+) create mode 100644 drivers/net/ethernet/intel/ice/ice_sf_eth.c
drivers/net/ethernet/intel/ice/Makefile +1 -0
@@ -31,6 +31,7 @@ ice-y := ice_main.o \ ice_idc.o \ devlink/devlink.o \ devlink/devlink_port.o \ + ice_sf_eth.o \ ice_ddp.o \ ice_fw_update.o \ ice_lag.o \
drivers/net/ethernet/intel/ice/ice_main.c +10 -0
@@ -15,6 +15,7 @@#include "ice_dcb_nl.h" #include "devlink/devlink.h" #include "devlink/devlink_port.h" +#include "ice_sf_eth.h" #include "ice_hwmon.h" /* Including ice_trace.h with CREATE_TRACE_POINTS defined will generate the * ice tracepoint functions. This must be done exactly once across the
@@ -5857,8 +5858,16 @@ static int __init ice_module_init(void) goto err_dest_lag_wq; } + status =ice_sf_driver_register (); +if (status) { +pr_err ("Failed to register SF driver, err %d\n" , status); + goto err_sf_driver; + } +return 0 ; +err_sf_driver: +pci_unregister_driver (&ice_driver); err_dest_lag_wq:destroy_workqueue (ice_lag_wq);ice_debugfs_exit ();
@@ -5876,6 +5885,7 @@ module_init(ice_module_init);*/ static void __exit ice_module_exit(void) { +ice_sf_driver_unregister ();pci_unregister_driver (&ice_driver);ice_debugfs_exit ();destroy_workqueue (ice_wq);
drivers/net/ethernet/intel/ice/ice_sf_eth.c new file +130 -0
130 lines not on this page · raw message
drivers/net/ethernet/intel/ice/ice_sf_eth.h +9 -0
@@ -18,4 +18,13 @@ struct ice_sf_priv {struct devlink_port devlink_port; }; +static inline struct +ice_sf_dev *ice_adev_to_sf_dev (struct auxiliary_device *adev) +{ + return container_of(adev, struct ice_sf_dev, adev); +} + +int ice_sf_driver_register (void ); +void ice_sf_driver_unregister (void ); +#endif /* _ICE_SF_ETH_H_ */
Signature · 1 line
2.42.0
Re: [iwl-next v3 5/7] ice: base subfunction aux driver
Quoted 10 lines · Fri, Apr 12, 2024 at 08:30:51AM CEST, [email protected] wrote:
From: Piotr Raczynski <[email protected]>
Implement subfunction driver. It is probe when subfunction port is activated.
VSI is already created. During the probe VSI is being configured. MAC unicast and broadcast filter is added to allow traffic to pass.
Signed-off-by Piotr Raczynski <[email protected]>Signed-off-by Michal Swiatkowski <[email protected]>
Przemek Kitszel
maintainerRe: [iwl-next v3 5/7] ice: base subfunction aux driver
In reply to Michal SwiatkowskiQuoted 149 lines · Michal Swiatkowski
From: Piotr Raczynski <[email protected]>
Implement subfunction driver. It is probe when subfunction port is activated.
VSI is already created. During the probe VSI is being configured. MAC unicast and broadcast filter is added to allow traffic to pass.
Signed-off-by Piotr Raczynski <[email protected]>Signed-off-by Michal Swiatkowski <[email protected]>--- drivers/net/ethernet/intel/ice/Makefile | 1 + drivers/net/ethernet/intel/ice/ice_main.c | 10 ++ drivers/net/ethernet/intel/ice/ice_sf_eth.c | 130 ++++++++++++++++++++ drivers/net/ethernet/intel/ice/ice_sf_eth.h | 9 ++ 4 files changed, 150 insertions(+)create mode 100644
drivers/net/ethernet/intel/ice/ice_sf_eth.cdrivers/net/ethernet/intel/ice/Makefile +1
-0@@ -31,6 +31,7 @@ ice-y := ice_main.o \ ice_idc.o \ devlink/devlink.o \ devlink/devlink_port.o \ + ice_sf_eth.o \ ice_ddp.o \ ice_fw_update.o \ ice_lag.o \drivers/net/ethernet/intel/ice/ice_main.c +10
-0@@ -15,6 +15,7 @@#include "ice_dcb_nl.h" #include "devlink/devlink.h" #include "devlink/devlink_port.h" +#include "ice_sf_eth.h" #include "ice_hwmon.h" /* Including ice_trace.h with CREATE_TRACE_POINTS defined will generate the * ice tracepoint functions. This must be done exactly once across the @@ -5857,8 +5858,16 @@ static int __init ice_module_init(void) goto err_dest_lag_wq; } + status =ice_sf_driver_register (); +if (status) { +pr_err ("Failed to register SF driver, err %d\n" , status); + goto err_sf_driver; + } +return 0 ; +err_sf_driver: +pci_unregister_driver (&ice_driver); err_dest_lag_wq:destroy_workqueue (ice_lag_wq);ice_debugfs_exit ();@@ -5876,6 +5885,7 @@ module_init(ice_module_init);*/ static void __exit ice_module_exit(void) { +ice_sf_driver_unregister ();pci_unregister_driver (&ice_driver);ice_debugfs_exit ();destroy_workqueue (ice_wq);drivers/net/ethernet/intel/ice/ice_sf_eth.c new file +76
-0@@ -0,0 +1,130 @@ +// SPDX-License-Identifier: GPL-2.0 +/* Copyright (c) 2024, Intel Corporation. */ +#include "ice.h" +#include "ice_lib.h" +#include "ice_fltr.h" +#include "ice_sf_eth.h" +#include "devlink/devlink_port.h" +#include "devlink/devlink.h" + +/** +* ice_sf_dev_probe - subfunction driver probe function +* @adev: pointer to the auxiliary device +* @id: pointer to the auxiliary_device id +* +* Configure VSI and netdev resources for the subfunction device. +* +* Return: zero on success or an error code on failure. +*/ +static int ice_sf_dev_probe (struct auxiliary_device *adev, +const struct auxiliary_device_id *id) +{ +struct ice_sf_dev *sf_dev =ice_adev_to_sf_dev (adev); +struct ice_dynamic_port *dyn_port = sf_dev->dyn_port; +struct ice_vsi_cfg_params params = {}; +struct ice_vsi *vsi = dyn_port->vsi; +struct ice_pf *pf = dyn_port->pf; +struct device *dev = &adev->dev; +struct ice_sf_priv *priv; +int err; + + params.type =ICE_VSI_SF ; + params.pi = pf->hw.port_info; + params.flags =ICE_VSI_FLAG_INIT ; + + priv =ice_allocate_sf (&adev->dev); +if (!priv) { +dev_err (dev,"Subfunction devlink alloc failed" ); +return -ENOMEM ; + } + + priv->dev = sf_dev; + sf_dev->priv = priv; + +devlink_register (priv_to_devlink (priv)); + + err =ice_vsi_cfg (vsi, ¶ms); +if (err) { +dev_err (dev,"Subfunction vsi config failed" ); +return err; + } + + err =ice_devlink_create_sf_dev_port (sf_dev); +if (err) { +dev_err (dev,"Cannot add ice virtual devlink port for subfunction" ); + goto err_vsi_decfg; + } + + err =ice_fltr_add_mac_and_broadcast (vsi, vsi->netdev->dev_addr, +ICE_FWD_TO_VSI ); +if (err) { +dev_err (dev,"can't add MAC filters %pM for VSI %d\n" , + vsi->netdev->dev_addr, vsi->idx); + goto err_devlink_destroy; + } + +ice_napi_add (vsi); + +return err; + +err_devlink_destroy: +ice_devlink_destroy_sf_dev_port (sf_dev); +err_vsi_decfg: +ice_vsi_decfg (vsi); +return err; +} +
drivers/net/ethernet/intel/ice/ice_sf_eth.c line 86
Quoted 10 lines
drivers/net/ethernet/intel/ice/ice_sf_eth.c new file +10
-0+/** +* ice_sf_dev_remove - subfunction driver remove function +* @adev: pointer to the auxiliary device +* +* Deinitalize VSI and netdev resources for the subfunction device. +*/ +static void ice_sf_dev_remove (struct auxiliary_device *adev) +{ +struct ice_sf_dev *sf_dev =ice_adev_to_sf_dev (adev); +struct devlink *devlink =priv_to_devlink (sf_dev->priv);
RCT
Quoted 62 lines
drivers/net/ethernet/intel/ice/ice_sf_eth.c new file +44
-0+struct ice_dynamic_port *dyn_port = sf_dev->dyn_port; +struct ice_vsi *vsi = dyn_port->vsi; + +ice_vsi_close (vsi); + +ice_devlink_destroy_sf_dev_port (sf_dev); +devlink_unregister (devlink); +devlink_free (devlink); +ice_vsi_decfg (vsi); +} + +static const struct auxiliary_device_id ice_sf_dev_id_table[] = { + { .name ="ice.sf" , }, + { }, +}; + +MODULE_DEVICE_TABLE (auxiliary, ice_sf_dev_id_table); + +static struct auxiliary_driver ice_sf_driver = { + .name ="sf" , + .probe = ice_sf_dev_probe, + .remove = ice_sf_dev_remove, + .id_table = ice_sf_dev_id_table +}; + +/** +* ice_sf_driver_register - Register new auxiliary subfunction driver +* +* Return: zero on success or an error code on failure. +*/ +int ice_sf_driver_register (void ) +{ +return auxiliary_driver_register (&ice_sf_driver); +} + +/** +* ice_sf_driver_unregister - Unregister new auxiliary subfunction driver +* +* Return: zero on success or an error code on failure. +*/ +void ice_sf_driver_unregister (void ) +{ +auxiliary_driver_unregister (&ice_sf_driver); +}drivers/net/ethernet/intel/ice/ice_sf_eth.h +9
-0@@ -18,4 +18,13 @@ struct ice_sf_priv {struct devlink_port devlink_port; }; +static inline struct +ice_sf_dev *ice_adev_to_sf_dev (struct auxiliary_device *adev) +{ + return container_of(adev, struct ice_sf_dev, adev); +} + +int ice_sf_driver_register (void ); +void ice_sf_driver_unregister (void ); +#endif /* _ICE_SF_ETH_H_ */
Re: [iwl-next v3 5/7] ice: base subfunction aux driver
Quoted 20 lines · Przemek Kitszel
Quoted 19 lines · Michal Swiatkowski
From: Piotr Raczynski <[email protected]>
Implement subfunction driver. It is probe when subfunction port is activated.
VSI is already created. During the probe VSI is being configured. MAC unicast and broadcast filter is added to allow traffic to pass.
Signed-off-by Piotr Raczynski <[email protected]>Signed-off-by Michal Swiatkowski <[email protected]>--- drivers/net/ethernet/intel/ice/Makefile | 1 + drivers/net/ethernet/intel/ice/ice_main.c | 10 ++ drivers/net/ethernet/intel/ice/ice_sf_eth.c | 130 ++++++++++++++++++++ drivers/net/ethernet/intel/ice/ice_sf_eth.h | 9 ++ 4 files changed, 150 insertions(+)create mode 100644
drivers/net/ethernet/intel/ice/ice_sf_eth.c+
[...]
Quoted 4 lines
Quoted 4 lines
+/**
+ *ice_sf_dev_remove- subfunction driver remove function
+ * @adev: pointer to the auxiliary device
+ *
Quoted 9 lines
drivers/net/ethernet/intel/ice/ice_sf_eth.c line 86
Quoted 6 lines
+ * Deinitalize VSI and netdev resources for the subfunction device.
+ */drivers/net/ethernet/intel/ice/ice_sf_eth.c new file +4
-0+static void ice_sf_dev_remove (struct auxiliary_device *adev) +{ +struct ice_sf_dev *sf_dev =ice_adev_to_sf_dev (adev); +struct devlink *devlink =priv_to_devlink (sf_dev->priv);RCT
Will fix
Thanks,
Michal
[...]
PATCH v3 6/7 ice: implement netdev for subfunction
In reply to Michal SwiatkowskiFrom: Piotr Raczynski <[email protected]>
Configure netdevice for subfunction usecase. Mostly it is reusing ops from the PF netdevice.
SF netdev is linked to devlink port registered after SF activation.
--- drivers/net/ethernet/intel/ice/ice_sf_eth.c | 85 ++++++++++++++++++++- 1 file changed, 84 insertions(+), 1 deletion(-)
drivers/net/ethernet/intel/ice/ice_sf_eth.c +84 -1
@@ -2,11 +2,85 @@/* Copyright (c) 2024, Intel Corporation. */ #include "ice.h" #include "ice_lib.h" +#include "ice_txrx.h" #include "ice_fltr.h" #include "ice_sf_eth.h" #include "devlink/devlink_port.h" #include "devlink/devlink.h" +static const struct net_device_ops ice_sf_netdev_ops = { + .ndo_open = ice_open, + .ndo_stop = ice_stop, + .ndo_start_xmit = ice_start_xmit, + .ndo_vlan_rx_add_vid = ice_vlan_rx_add_vid, + .ndo_vlan_rx_kill_vid = ice_vlan_rx_kill_vid, + .ndo_change_mtu = ice_change_mtu, + .ndo_get_stats64 = ice_get_stats64, + .ndo_tx_timeout = ice_tx_timeout, + .ndo_bpf = ice_xdp, + .ndo_xdp_xmit = ice_xdp_xmit, + .ndo_xsk_wakeup = ice_xsk_wakeup, +}; + +/** +* ice_sf_cfg_netdev - Allocate, configure and register a netdev +* @dyn_port: subfunction associated with configured netdev +* @devlink_port: subfunction devlink port to be linked with netdev +* +* Return: 0 on success, negative value on failure +*/ +static int ice_sf_cfg_netdev (struct ice_dynamic_port *dyn_port, +struct devlink_port *devlink_port) +{ +struct ice_vsi *vsi = dyn_port->vsi; +struct ice_netdev_priv *np; +struct net_device *netdev; +int err; + + netdev =alloc_etherdev_mqs (sizeof (*np), vsi->alloc_txq, + vsi->alloc_rxq); +if (!netdev) +return -ENOMEM ; + +SET_NETDEV_DEV (netdev, &vsi->back->pdev->dev); +set_bit (ICE_VSI_NETDEV_ALLOCD , vsi->state); + vsi->netdev = netdev; + np =netdev_priv (netdev); + np->vsi = vsi; + +ice_set_netdev_features (netdev); + + netdev->xdp_features =NETDEV_XDP_ACT_BASIC |NETDEV_XDP_ACT_REDIRECT | +NETDEV_XDP_ACT_XSK_ZEROCOPY | +NETDEV_XDP_ACT_RX_SG ; + +eth_hw_addr_set (netdev, dyn_port->hw_addr); +ether_addr_copy (netdev->perm_addr, dyn_port->hw_addr); + netdev->netdev_ops = &ice_sf_netdev_ops; +SET_NETDEV_DEVLINK_PORT (netdev, devlink_port); + + err =register_netdev (netdev); +if (err) { +free_netdev (netdev); + vsi->netdev =NULL ; +return -ENOMEM ; + } +set_bit (ICE_VSI_NETDEV_REGISTERED , vsi->state); +netif_carrier_off (netdev); +netif_tx_stop_all_queues (netdev); + +return 0 ; +} + +static void ice_sf_decfg_netdev (struct ice_vsi *vsi) +{ +unregister_netdev (vsi->netdev); +clear_bit (ICE_VSI_NETDEV_REGISTERED , vsi->state); +free_netdev (vsi->netdev); + vsi->netdev =NULL ; +clear_bit (ICE_VSI_NETDEV_ALLOCD , vsi->state); +} +/** * ice_sf_dev_probe - subfunction driver probe function * @adev: pointer to the auxiliary device
@@ -55,18 +129,26 @@ static int ice_sf_dev_probe(struct auxiliary_device *adev, goto err_vsi_decfg; } + err =ice_sf_cfg_netdev (dyn_port, &sf_dev->priv->devlink_port); +if (err) { +dev_err (dev,"Subfunction netdev config failed" ); + goto err_devlink_destroy; + } + err =ice_fltr_add_mac_and_broadcast (vsi, vsi->netdev->dev_addr,ICE_FWD_TO_VSI );if (err) {dev_err (dev,"can't add MAC filters %pM for VSI %d\n" , vsi->netdev->dev_addr, vsi->idx); - goto err_devlink_destroy; + goto err_netdev_decfg; }ice_napi_add (vsi);return err; +err_netdev_decfg: +ice_sf_decfg_netdev (vsi); err_devlink_destroy:ice_devlink_destroy_sf_dev_port (sf_dev); err_vsi_decfg:
@@ -89,6 +171,7 @@ static void ice_sf_dev_remove(struct auxiliary_device *adev)ice_vsi_close (vsi); +ice_sf_decfg_netdev (vsi);ice_devlink_destroy_sf_dev_port (sf_dev);devlink_unregister (devlink);devlink_free (devlink);
Signature · 1 line
2.42.0
Re: [iwl-next v3 6/7] ice: implement netdev for subfunction
Quoted 9 lines · Fri, Apr 12, 2024 at 08:30:52AM CEST, [email protected] wrote:
From: Piotr Raczynski <[email protected]>
Configure netdevice for subfunction usecase. Mostly it is reusing ops from the PF netdevice.
SF netdev is linked to devlink port registered after SF activation.
Signed-off-by Piotr Raczynski <[email protected]>Signed-off-by Michal Swiatkowski <[email protected]>
PATCH v3 7/7 ice: allow to activate and deactivate subfunction
In reply to Michal SwiatkowskiFrom: Piotr Raczynski <[email protected]>
Use previously implemented SF aux driver. It is probe during SF activation and remove after deactivation.
--- .../ethernet/intel/ice/devlink/devlink_port.c | 7 ++ .../ethernet/intel/ice/devlink/devlink_port.h | 5 + drivers/net/ethernet/intel/ice/ice_sf_eth.c | 104 ++++++++++++++++++ drivers/net/ethernet/intel/ice/ice_sf_eth.h | 3 + 4 files changed, 119 insertions(+)
drivers/net/ethernet/intel/ice/devlink/devlink_port.c +7 -0
@@ -496,6 +496,12 @@ static int ice_activate_dynamic_port(struct ice_dynamic_port *dyn_port, struct netlink_ext_ack *extack) { + int err; + + err =ice_sf_eth_activate (dyn_port, extack); +if (err) +return err; + dyn_port->active = true;return 0 ;
@@ -509,6 +515,7 @@ ice_activate_dynamic_port(struct ice_dynamic_port *dyn_port,*/ static void ice_deactivate_dynamic_port (struct ice_dynamic_port *dyn_port) { +ice_sf_eth_deactivate (dyn_port); dyn_port->active = false; }
drivers/net/ethernet/intel/ice/devlink/devlink_port.h +5 -0
@@ -14,6 +14,7 @@* @devlink_port: the associated devlink port structure * @pf: pointer to the PF private structure * @vsi: the VSI associated with this port +* @sf_dev: pointer to the subfunction device * * An instance of a dynamically added devlink port. Each port flavour */
@@ -23,6 +24,10 @@ struct ice_dynamic_port {struct devlink_port devlink_port;struct ice_pf *pf;struct ice_vsi *vsi; +/* Flavour-specific implementation data */ +union { +struct ice_sf_dev *sf_dev; + }; };void ice_dealloc_all_dynamic_ports (struct ice_pf *pf);
drivers/net/ethernet/intel/ice/ice_sf_eth.c +104 -0
113 lines not on this page · raw message
drivers/net/ethernet/intel/ice/ice_sf_eth.h +3 -0
@@ -27,4 +27,7 @@ ice_sf_dev *ice_adev_to_sf_dev(struct auxiliary_device *adev)int ice_sf_driver_register (void );void ice_sf_driver_unregister (void ); +int ice_sf_eth_activate (struct ice_dynamic_port *dyn_port, +struct netlink_ext_ack *extack); +void ice_sf_eth_deactivate (struct ice_dynamic_port *dyn_port);#endif /* _ICE_SF_ETH_H_ */
Signature · 1 line
2.42.0