Skip to contentSkip to conversation

Add parents to struct pmu -> dev

PATCH Applied Jonathan Cameron 6 participants 38 messages Apr 12, 2024 – May 2, 2024

Subsystems (25)
lore
Share & tools
lore
#0 lore raw

v2 cover Add parents to struct pmu -> dev

Robin posted a patch for the cmn and that reminded me that I never sent a v2.

v2: Drop first patch that added a parent to struct pmu as that has been
upstream for a year.
Drop the arm-cmn change as Robin has dealt with that one. Gathered tags.

Updated cover letter:

These are the low hanging fruit following GregKH's feedback that all the devices registered via perf_pmu_register() should have parents.

Note that this causes potential ABI breakage.

It may fall in the category of it isn't breakage if no one notices but I can't be certain of that. Whilst it is arguable that no one should be been accessing PMUs except via the event_source bus, there was documentation suggesting /sys/devices/ for particular PMUs (because it was a shorter path?)

Addressing all the other instances of struct pmu not covered by this series is likely to be a more complex discussion but unlikely to have an affect on what is proposed here.

Documentation updates deliberately 'fixed' in separate patches before changing the path to highlight that using /sys/bus/event_source/devices path is unchanged by this series and that is presumed to be the most common way these files are accessed.

Jonathan Cameron (30):
perf/hisi-pcie: Assign parent for event_source device
Documentation: hisi-pmu: Drop reference to /sys/devices path perf/hisi-uncore: Assign parents for event_source devices
Documentation: hns-pmu: Use /sys/bus/event_source/devices paths perf/hisi-hns3: Assign parents for event_source device perf/amlogic: Assign parents for event_source devices perf/arm_cspmu: Assign parents for event_source devices
Documentation: xgene-pmu: Use /sys/bus/event_source/devices paths perf/xgene: Assign parents for event_source devices
Documentation: thunderx2-pmu: Use /sys/bus/event_source/devices paths perf/thunderx2: Assign parents for event_source devices perf/riscv: Assign parents for event_source devices
Documentation: qcom-pmu: Use /sys/bus/event_source/devices paths perf/qcom: Assign parents for event_source devices perf/imx_ddr: Assign parents for event_source devices perf/arm_pmu: Assign parents for event_source devices perf/alibaba_uncore: Assign parents for event_source device perf/arm-cci: Assign parents for event_source device perf/arm-ccn: Assign parents for event_source device perf/arm-dmc620: Assign parents for event_source device perf/arm-dsu: Assign parents for event_source device perf/arm-smmuv3: Assign parents for event_source device perf/arm-spe: Assign parents for event_source device
arc: Assign parents for event_source devices
ARM: imx: Assign parents for mmdc event_source devices
dmaengine: idxd: Assign parent for event_source device
fpga: dfl: Assign parent for event_source device drivers/nvdimm: Assign parent for event_source device
Documentation: ABI + trace: hisi_ptt: update paths to bus/event_source
hwtracing: hisi_ptt: Assign parent for event_source device

 ...i_ptt => sysfs-bus-event_source-devices-hisi_ptt} | 12 ++++++------
 Documentation/admin-guide/perf/hisi-pmu.rst          |  1 -
 Documentation/admin-guide/perf/hns3-pmu.rst          |  8 ++++----
 Documentation/admin-guide/perf/qcom_l2_pmu.rst       |  2 +-
 Documentation/admin-guide/perf/qcom_l3_pmu.rst       |  2 +-
 Documentation/admin-guide/perf/thunderx2-pmu.rst     |  2 +-
 Documentation/admin-guide/perf/xgene-pmu.rst         |  2 +-
 Documentation/trace/hisi-ptt.rst                     |  4 ++--
 MAINTAINERS                                          |  2 +-
 arch/arc/kernel/perf_event.c                         |  1 +
 arch/arm/mach-imx/mmdc.c                             |  1 +
 drivers/dma/idxd/perfmon.c                           |  1 +
 drivers/fpga/dfl-fme-perf.c                          |  1 +
 drivers/hwtracing/ptt/hisi_ptt.c                     |  1 +
 drivers/nvdimm/nd_perf.c                             |  1 +
 drivers/perf/alibaba_uncore_drw_pmu.c                |  1 +
 drivers/perf/amlogic/meson_ddr_pmu_core.c            |  1 +
 drivers/perf/arm-cci.c                               |  1 +
 drivers/perf/arm-ccn.c                               |  1 +
 drivers/perf/arm_cspmu/arm_cspmu.c                   |  1 +
 drivers/perf/arm_dmc620_pmu.c                        |  1 +
 drivers/perf/arm_dsu_pmu.c                           |  1 +
 drivers/perf/arm_pmu_platform.c                      |  1 +
 drivers/perf/arm_smmuv3_pmu.c                        |  1 +
 drivers/perf/arm_spe_pmu.c                           |  1 +
 drivers/perf/fsl_imx8_ddr_perf.c                     |  1 +
 drivers/perf/hisilicon/hisi_pcie_pmu.c               |  1 +
 drivers/perf/hisilicon/hisi_uncore_pmu.c             |  1 +
 drivers/perf/hisilicon/hns3_pmu.c                    |  1 +
 drivers/perf/qcom_l2_pmu.c                           |  1 +
 drivers/perf/qcom_l3_pmu.c                           |  1 +
 drivers/perf/riscv_pmu_legacy.c                      |  1 +
 drivers/perf/riscv_pmu_sbi.c                         |  1 +
 drivers/perf/thunderx2_pmu.c                         |  1 +
 drivers/perf/xgene_pmu.c                             |  1 +
 35 files changed, 43 insertions(+), 18 deletions(-)
 rename Documentation/ABI/testing/{sysfs-devices-hisi_ptt => sysfs-bus-event_source-devices-hisi_ptt} (90%)
Signature · 1 line
2.39.2
#1 lore raw

PATCH v2 1/30 perf/hisi-pcie: Assign parent for event_source device

Currently the PMU device appears directly under /sys/devices/ Only root busses should appear there, so instead assign the pmu->dev parent to be the PCI device.

---
 drivers/perf/hisilicon/hisi_pcie_pmu.c | 1 +
 1 file changed, 1 insertion(+)
drivers/perf/hisilicon/hisi_pcie_pmu.c +1 -0
index 5d1f0e9fdb08..eacbd4e51ba6 100644
@@ -807,6 +807,7 @@ static int hisi_pcie_alloc_pmu(struct pci_dev *pdev, struct hisi_pcie_pmu *pcie_
 	pcie_pmu->pmu = (struct pmu) {
 		.name		= name,
 		.module		= THIS_MODULE,
+		.parent		= &pdev->dev,
 		.event_init	= hisi_pcie_pmu_event_init,
 		.pmu_enable	= hisi_pcie_pmu_enable,
 		.pmu_disable	= hisi_pcie_pmu_disable,
Signature · 1 line
2.39.2
#2 lore raw

PATCH v2 2/30 Documentation: hisi-pmu: Drop reference to /sys/devices path

In reply to Jonathan Cameron

Having assigned a parent to the device, the suggested path is no longer valid. As /sys/bus/event_sources based path is also provided, simply drop mention of alternative.

---
 Documentation/admin-guide/perf/hisi-pmu.rst | 1 -
 1 file changed, 1 deletion(-)
Documentation/admin-guide/perf/hisi-pmu.rst +0 -1
index e0174d20809a..5cc248d18c63 100644
@@ -20,7 +20,6 @@ interrupt, and the PMU driver shall register perf PMU drivers like L3C,
 HHA and DDRC etc. The available events and configuration options shall
 be described in the sysfs, see:
 
-/sys/devices/hisi_sccl{X}_<l3c{Y}/hha{Y}/ddrc{Y}>/, or
 /sys/bus/event_source/devices/hisi_sccl{X}_<l3c{Y}/hha{Y}/ddrc{Y}>.
 The "perf list" command shall list the available events from sysfs.
 
Signature · 1 line
2.39.2
#3 lore raw

PATCH v2 3/30 perf/hisi-uncore: Assign parents for event_source devices

In reply to Jonathan Cameron

Currently the PMU device appears directly under /sys/devices/ Only root busses should appear there, so instead assign the pmu->dev parent to be the platform device.

---
 drivers/perf/hisilicon/hisi_uncore_pmu.c | 1 +
 1 file changed, 1 insertion(+)
drivers/perf/hisilicon/hisi_uncore_pmu.c +1 -0
index 04031450d5fe..5519965600dc 100644
@@ -538,6 +538,7 @@ void hisi_pmu_init(struct hisi_pmu *hisi_pmu, struct module *module)
 	struct pmu *pmu = &hisi_pmu->pmu;
 
 	pmu->module             = module;
+	pmu->parent             = hisi_pmu->dev;
 	pmu->task_ctx_nr        = perf_invalid_context;
 	pmu->event_init         = hisi_uncore_pmu_event_init;
 	pmu->pmu_enable         = hisi_uncore_pmu_enable;
Signature · 1 line
2.39.2
#4 lore raw

PATCH v2 4/30 Documentation: hns-pmu: Use /sys/bus/event_source/devices paths

In reply to Jonathan Cameron

To allow setting an appropriate parent for the struct pmu device remove existing references to /sys/devices/ path.

---
 Documentation/admin-guide/perf/hns3-pmu.rst | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)
Documentation/admin-guide/perf/hns3-pmu.rst +4 -4
index 75a40846d47f..1195e570f2d6 100644
@@ -16,7 +16,7 @@ HNS3 PMU driver
 
 The HNS3 PMU driver registers a perf PMU with the name of its sicl id.::
 
-  /sys/devices/hns3_pmu_sicl_<sicl_id>
+  /sys/bus/event_source/devices/hns3_pmu_sicl_<sicl_id>
 
 PMU driver provides description of available events, filter modes, format,
 identifier and cpumask in sysfs.
@@ -40,9 +40,9 @@ device.
 
 Example usage of checking event code and subevent code::
 
-  $# cat /sys/devices/hns3_pmu_sicl_0/events/dly_tx_normal_to_mac_time
+  $# cat /sys/bus/event_source/devices/hns3_pmu_sicl_0/events/dly_tx_normal_to_mac_time
   config=0x00204
-  $# cat /sys/devices/hns3_pmu_sicl_0/events/dly_tx_normal_to_mac_packet_num
+  $# cat /sys/bus/event_source/devices/hns3_pmu_sicl_0/events/dly_tx_normal_to_mac_packet_num
   config=0x10204
 
 Each performance statistic has a pair of events to get two values to
@@ -60,7 +60,7 @@ computation to calculate real performance data is:::
 
 Example usage of checking supported filter mode::
 
-  $# cat /sys/devices/hns3_pmu_sicl_0/filtermode/bw_ssu_rpu_byte_num
+  $# cat /sys/bus/event_source/devices/hns3_pmu_sicl_0/filtermode/bw_ssu_rpu_byte_num
   filter mode supported: global/port/port-tc/func/func-queue/
 
 Example usage of perf::
Signature · 1 line
2.39.2
#5 lore raw

PATCH v2 5/30 perf/hisi-hns3: Assign parents for event_source device

In reply to Jonathan Cameron

Currently the PMU device appears directly under /sys/devices/ Only root busses should appear there, so instead assign the pmu->dev parent to be the PCI device.

---
 drivers/perf/hisilicon/hns3_pmu.c | 1 +
 1 file changed, 1 insertion(+)
drivers/perf/hisilicon/hns3_pmu.c +1 -0
index 16869bf5bf4c..5236acdcc2e1 100644
@@ -1419,6 +1419,7 @@ static int hns3_pmu_alloc_pmu(struct pci_dev *pdev, struct hns3_pmu *hns3_pmu)
 	hns3_pmu->pmu = (struct pmu) {
 		.name		= name,
 		.module		= THIS_MODULE,
+		.parent		= &pdev->dev,
 		.event_init	= hns3_pmu_event_init,
 		.pmu_enable	= hns3_pmu_enable,
 		.pmu_disable	= hns3_pmu_disable,
Signature · 1 line
2.39.2
#6 lore raw

PATCH v2 6/30 perf/amlogic: Assign parents for event_source devices

In reply to Jonathan Cameron

Currently all these devices appear directly under /sys/devices/ Only root busses should appear there, so instead assign the pmu->dev parents to be the platform device.

---
 drivers/perf/amlogic/meson_ddr_pmu_core.c | 1 +
 1 file changed, 1 insertion(+)
drivers/perf/amlogic/meson_ddr_pmu_core.c +1 -0
index bbc7285fd934..07446d784a1a 100644
@@ -492,6 +492,7 @@ int meson_ddr_pmu_create(struct platform_device *pdev)
 	*pmu = (struct ddr_pmu) {
 		.pmu = {
 			.module		= THIS_MODULE,
+			.parent		= &pdev->dev,
 			.capabilities	= PERF_PMU_CAP_NO_EXCLUDE,
 			.task_ctx_nr	= perf_invalid_context,
 			.attr_groups	= attr_groups,
Signature · 1 line
2.39.2
#7 lore raw

PATCH v2 7/30 perf/arm_cspmu: Assign parents for event_source devices

In reply to Jonathan Cameron

Currently all these devices appear directly under /sys/devices/ Only root busses should appear there, so instead assign the pmu->dev parents to be the platform device.

---
 drivers/perf/arm_cspmu/arm_cspmu.c | 1 +
 1 file changed, 1 insertion(+)
drivers/perf/arm_cspmu/arm_cspmu.c +1 -0
index b9a252272f1e..601d7d0d81d4 100644
@@ -1206,6 +1206,7 @@ static int arm_cspmu_register_pmu(struct arm_cspmu *cspmu)
 	cspmu->pmu = (struct pmu){
 		.task_ctx_nr	= perf_invalid_context,
 		.module		= cspmu->impl.module,
+		.parent		= cspmu->dev,
 		.pmu_enable	= arm_cspmu_enable,
 		.pmu_disable	= arm_cspmu_disable,
 		.event_init	= arm_cspmu_event_init,
Signature · 1 line
2.39.2
#8 lore raw

PATCH v2 8/30 Documentation: xgene-pmu: Use /sys/bus/event_source/devices paths

In reply to Jonathan Cameron

To allow setting an appropriate parent for the struct pmu device remove existing references to /sys/devices/ path.

---
 Documentation/admin-guide/perf/xgene-pmu.rst | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
Documentation/admin-guide/perf/xgene-pmu.rst +1 -1
index 644f8ed89152..98ccb8e777c4 100644
@@ -13,7 +13,7 @@ PMU (perf) driver
 
 The xgene-pmu driver registers several perf PMU drivers. Each of the perf
 driver provides description of its available events and configuration options
-in sysfs, see /sys/devices/<l3cX/iobX/mcbX/mcX>/.
+in sysfs, see /sys/bus/event_source/devices/<l3cX/iobX/mcbX/mcX>/.
 
 The "format" directory describes format of the config (event ID),
 config1 (agent ID) fields of the perf_event_attr structure. The "events"
Signature · 1 line
2.39.2
#9 lore raw

PATCH v2 9/30 perf/xgene: Assign parents for event_source devices

In reply to Jonathan Cameron

Currently all these devices appear directly under /sys/devices/ Only root busses should appear there, so instead assign the pmu->dev parents to be the hardware related struct device.

---
 drivers/perf/xgene_pmu.c | 1 +
 1 file changed, 1 insertion(+)
drivers/perf/xgene_pmu.c +1 -0
index 0d49343d704b..8823b4c6b556 100644
@@ -1102,6 +1102,7 @@ static int xgene_init_perf(struct xgene_pmu_dev *pmu_dev, char *name)
 
 	/* Perf driver registration */
 	pmu_dev->pmu = (struct pmu) {
+		.parent		= pmu_dev->parent->dev,
 		.attr_groups	= pmu_dev->attr_groups,
 		.task_ctx_nr	= perf_invalid_context,
 		.pmu_enable	= xgene_perf_pmu_enable,
Signature · 1 line
2.39.2
#10 lore raw

PATCH v2 10/30 Documentation: thunderx2-pmu: Use /sys/bus/event_source/devices paths

In reply to Jonathan Cameron

To allow setting an appropriate parent for the struct pmu device remove existing references to /sys/devices/ path.

---
 Documentation/admin-guide/perf/thunderx2-pmu.rst | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
Documentation/admin-guide/perf/thunderx2-pmu.rst +1 -1
index 01f158238ae1..9255f7bf9452 100644
@@ -22,7 +22,7 @@ The thunderx2_pmu driver registers per-socket perf PMUs for the DMC and
 L3C devices.  Each PMU can be used to count up to 4 (DMC/L3C) or up to 8
 (CCPI2) events simultaneously. The PMUs provide a description of their
 available events and configuration options under sysfs, see
-/sys/devices/uncore_<l3c_S/dmc_S/ccpi2_S/>; S is the socket id.
+/sys/bus/event_source/devices/uncore_<l3c_S/dmc_S/ccpi2_S/>; S is the socket id.
 
 The driver does not support sampling, therefore "perf record" will not
 work. Per-task perf sessions are also not supported.
Signature · 1 line
2.39.2
#11 lore raw

PATCH v2 11/30 perf/thunderx2: Assign parents for event_source devices

In reply to Jonathan Cameron

Currently all these devices appear directly under /sys/devices/ Only root busses should appear there, so instead assign the pmu->dev parents to be the platform device.

---
 drivers/perf/thunderx2_pmu.c | 1 +
 1 file changed, 1 insertion(+)
drivers/perf/thunderx2_pmu.c +1 -0
index e16d10c763de..4af1510d196d 100644
@@ -729,6 +729,7 @@ static int tx2_uncore_pmu_register(
 	/* Perf event registration */
 	tx2_pmu->pmu = (struct pmu) {
 		.module         = THIS_MODULE,
+		.parent		= tx2_pmu->dev,
 		.attr_groups	= tx2_pmu->attr_groups,
 		.task_ctx_nr	= perf_invalid_context,
 		.event_init	= tx2_uncore_event_init,
Signature · 1 line
2.39.2
#12 lore raw

PATCH v2 12/30 perf/riscv: Assign parents for event_source devices

In reply to Jonathan Cameron

Currently all these devices appear directly under /sys/devices/ Only root busses should appear there, so instead assign the pmu->dev parents to be the appropriate platform devices.

---
 drivers/perf/riscv_pmu_legacy.c | 1 +
 drivers/perf/riscv_pmu_sbi.c    | 1 +
 2 files changed, 2 insertions(+)
drivers/perf/riscv_pmu_legacy.c +1 -0
index fa0bccf4edf2..04487ad7fba0 100644
@@ -136,6 +136,7 @@ static int pmu_legacy_device_probe(struct platform_device *pdev)
 	pmu = riscv_pmu_alloc();
 	if (!pmu)
 		return -ENOMEM;
+	pmu->pmu.parent = &pdev->dev;
 	pmu_legacy_init(pmu);
 
 	return 0;
drivers/perf/riscv_pmu_sbi.c +1 -0
index 8cbe6e5f9c39..5c9c98fd796a 100644
@@ -1081,6 +1081,7 @@ static int pmu_sbi_device_probe(struct platform_device *pdev)
 	}
 
 	pmu->pmu.attr_groups = riscv_pmu_attr_groups;
+	pmu->pmu.parent = &pdev->dev;
 	pmu->cmask = cmask;
 	pmu->ctr_start = pmu_sbi_ctr_start;
 	pmu->ctr_stop = pmu_sbi_ctr_stop;
Signature · 1 line
2.39.2
#13 lore raw

PATCH v2 13/30 Documentation: qcom-pmu: Use /sys/bus/event_source/devices paths

In reply to Jonathan Cameron

To allow setting an appropriate parent for the struct pmu device remove existing references to /sys/devices/ path.

---
 Documentation/admin-guide/perf/qcom_l2_pmu.rst | 2 +-
 Documentation/admin-guide/perf/qcom_l3_pmu.rst | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)
Documentation/admin-guide/perf/qcom_l2_pmu.rst +1 -1
index c130178a4a55..c37c6be9b8d8 100644
@@ -10,7 +10,7 @@ There is one logical L2 PMU exposed, which aggregates the results from
 the physical PMUs.
 
 The driver provides a description of its available events and configuration
-options in sysfs, see /sys/devices/l2cache_0.
+options in sysfs, see /sys/bus/event_source/devices/l2cache_0.
 
 The "format" directory describes the format of the events.
 
Documentation/admin-guide/perf/qcom_l3_pmu.rst +1 -1
index a3d014a46bfd..a66556b7e985 100644
@@ -9,7 +9,7 @@ PMU with device name l3cache_<socket>_<instance>. User space is responsible
 for aggregating across slices.
 
 The driver provides a description of its available events and configuration
-options in sysfs, see /sys/devices/l3cache*. Given that these are uncore PMUs
+options in sysfs, see /sys/bus/event_source/devices/l3cache*. Given that these are uncore PMUs
 the driver also exposes a "cpumask" sysfs attribute which contains a mask
 consisting of one CPU per socket which will be used to handle all the PMU
 events on that socket.
Signature · 1 line
2.39.2
#14 lore raw

PATCH v2 14/30 perf/qcom: Assign parents for event_source devices

In reply to Jonathan Cameron

Currently all these devices appear directly under /sys/devices/ Only root busses should appear there, so instead assign the pmu->dev parents to be the platform devices.

---
 drivers/perf/qcom_l2_pmu.c | 1 +
 drivers/perf/qcom_l3_pmu.c | 1 +
 2 files changed, 2 insertions(+)
drivers/perf/qcom_l2_pmu.c +1 -0
index 148df5ae8ef8..9d6a8ae1c47a 100644
@@ -904,6 +904,7 @@ static int l2_cache_pmu_probe(struct platform_device *pdev)
 	l2cache_pmu->pmu = (struct pmu) {
 		/* suffix is instance id for future use with multiple sockets */
 		.name		= "l2cache_0",
+		.parent		= &pdev->dev,
 		.task_ctx_nr    = perf_invalid_context,
 		.pmu_enable	= l2_cache_pmu_enable,
 		.pmu_disable	= l2_cache_pmu_disable,
drivers/perf/qcom_l3_pmu.c +1 -0
index f16783d03db7..37786e88514e 100644
@@ -748,6 +748,7 @@ static int qcom_l3_cache_pmu_probe(struct platform_device *pdev)
 		return -ENOMEM;
 
 	l3pmu->pmu = (struct pmu) {
+		.parent		= &pdev->dev,
 		.task_ctx_nr	= perf_invalid_context,
 
 		.pmu_enable	= qcom_l3_cache__pmu_enable,
Signature · 1 line
2.39.2
#15 lore raw

PATCH v2 15/30 perf/imx_ddr: Assign parents for event_source devices

In reply to Jonathan Cameron

Currently all this device appear directly under /sys/devices/ Only root busses should appear there, so instead assign the pmu->dev parent to be the platform device.

---
 drivers/perf/fsl_imx8_ddr_perf.c | 1 +
 1 file changed, 1 insertion(+)
drivers/perf/fsl_imx8_ddr_perf.c +1 -0
index 4e8fa5a48fcf..1bbdb29743c4 100644
@@ -651,6 +651,7 @@ static int ddr_perf_init(struct ddr_pmu *pmu, void __iomem *base,
 	*pmu = (struct ddr_pmu) {
 		.pmu = (struct pmu) {
 			.module	      = THIS_MODULE,
+			.parent      = dev,
 			.capabilities = PERF_PMU_CAP_NO_EXCLUDE,
 			.task_ctx_nr = perf_invalid_context,
 			.attr_groups = attr_groups,
Signature · 1 line
2.39.2
#16 lore raw

PATCH v2 16/30 perf/arm_pmu: Assign parents for event_source devices

In reply to Jonathan Cameron

Currently the PMU device appears directly under /sys/devices/ Only root busses should appear there, so instead assign the pmu->dev parent to be the platform device.

---
 drivers/perf/arm_pmu_platform.c | 1 +
 1 file changed, 1 insertion(+)
drivers/perf/arm_pmu_platform.c +1 -0
index 3596db36cbff..4b1a9a92ea11 100644
@@ -196,6 +196,7 @@ int arm_pmu_device_probe(struct platform_device *pdev,
 	if (!pmu)
 		return -ENOMEM;
 
+	pmu->pmu.parent = &pdev->dev;
 	pmu->plat_device = pdev;
 
 	ret = pmu_parse_irqs(pmu);
Signature · 1 line
2.39.2
Reviewed-by on v2 16/30
#17 lore raw

Re: [PATCH v2 16/30] perf/arm_pmu: Assign parents for event_source devices

Quoted 15 lines · Jonathan Cameron

Currently the PMU device appears directly under /sys/devices/ Only root busses should appear there, so instead assign the pmu->dev parent to be the platform device.

---
  drivers/perf/arm_pmu_platform.c | 1 +
  1 file changed, 1 insertion(+)
drivers/perf/arm_pmu_platform.c +0 -0
index 3596db36cbff..4b1a9a92ea11 100644

drivers/perf/arm_pmu_platform.c int arm_pmu_device_probe(struct platform_device *pdev, · line 202

Quoted 7 lines
drivers/perf/arm_pmu_platform.c +1 -0
@@ -196,6 +196,7 @@ int arm_pmu_device_probe(struct platform_device *pdev,
  	if (!pmu)
  		return -ENOMEM;
 
+	pmu->pmu.parent = &pdev->dev;
  	pmu->plat_device = pdev;
 
  	ret = pmu_parse_irqs(pmu);
#18 lore raw

PATCH v2 17/30 perf/alibaba_uncore: Assign parents for event_source device

In reply to Jonathan Cameron

Currently the PMU device appears directly under /sys/devices/ Only root busses should appear there, so instead assign the pmu->dev parent to be the platform device.

---
 drivers/perf/alibaba_uncore_drw_pmu.c | 1 +
 1 file changed, 1 insertion(+)
drivers/perf/alibaba_uncore_drw_pmu.c +1 -0
index a9277dcf90ce..aa378c765a74 100644
@@ -709,6 +709,7 @@ static int ali_drw_pmu_probe(struct platform_device *pdev)
 
 	drw_pmu->pmu = (struct pmu) {
 		.module		= THIS_MODULE,
+		.parent		= &pdev->dev,
 		.task_ctx_nr	= perf_invalid_context,
 		.event_init	= ali_drw_pmu_event_init,
 		.add		= ali_drw_pmu_add,
Signature · 1 line
2.39.2
#19 lore raw

PATCH v2 18/30 perf/arm-cci: Assign parents for event_source device

In reply to Jonathan Cameron

Currently the PMU device appears directly under /sys/devices/ Only root busses should appear there, so instead assign the pmu->dev parent to be the platform device.

---
 drivers/perf/arm-cci.c | 1 +
 1 file changed, 1 insertion(+)
drivers/perf/arm-cci.c +1 -0
index 6be03f81ae5d..a7fd80677919 100644
@@ -1409,6 +1409,7 @@ static int cci_pmu_init(struct cci_pmu *cci_pmu, struct platform_device *pdev)
 
 	cci_pmu->pmu = (struct pmu) {
 		.module		= THIS_MODULE,
+		.parent		= &pdev->dev,
 		.name		= cci_pmu->model->name,
 		.task_ctx_nr	= perf_invalid_context,
 		.pmu_enable	= cci_pmu_enable,
Signature · 1 line
2.39.2
#20 lore raw

PATCH v2 19/30 perf/arm-ccn: Assign parents for event_source device

In reply to Jonathan Cameron

Currently the PMU device appears directly under /sys/devices/ Only root busses should appear there, so instead assign the pmu->dev parent to be the platform device.

---
 drivers/perf/arm-ccn.c | 1 +
 1 file changed, 1 insertion(+)
drivers/perf/arm-ccn.c +1 -0
index 641471bd5eff..f4495ff6525f 100644
@@ -1265,6 +1265,7 @@ static int arm_ccn_pmu_init(struct arm_ccn *ccn)
 	/* Perf driver registration */
 	ccn->dt.pmu = (struct pmu) {
 		.module = THIS_MODULE,
+		.parent = ccn->dev,
 		.attr_groups = arm_ccn_pmu_attr_groups,
 		.task_ctx_nr = perf_invalid_context,
 		.event_init = arm_ccn_pmu_event_init,
Signature · 1 line
2.39.2
#21 lore raw

PATCH v2 20/30 perf/arm-dmc620: Assign parents for event_source device

In reply to Jonathan Cameron

Currently the PMU device appears directly under /sys/devices/ Only root busses should appear there, so instead assign the pmu->dev parent to be the platform device.

---
 drivers/perf/arm_dmc620_pmu.c | 1 +
 1 file changed, 1 insertion(+)
drivers/perf/arm_dmc620_pmu.c +1 -0
index 8a81be2dd5ec..2ec96e204c40 100644
@@ -673,6 +673,7 @@ static int dmc620_pmu_device_probe(struct platform_device *pdev)
 
 	dmc620_pmu->pmu = (struct pmu) {
 		.module = THIS_MODULE,
+		.parent		= &pdev->dev,
 		.capabilities	= PERF_PMU_CAP_NO_EXCLUDE,
 		.task_ctx_nr	= perf_invalid_context,
 		.event_init	= dmc620_pmu_event_init,
Signature · 1 line
2.39.2
#22 lore raw

PATCH v2 21/30 perf/arm-dsu: Assign parents for event_source device

In reply to Jonathan Cameron

Currently the PMU device appears directly under /sys/devices/ Only root busses should appear there, so instead assign the pmu->dev parent to be the platform device.

---
 drivers/perf/arm_dsu_pmu.c | 1 +
 1 file changed, 1 insertion(+)
drivers/perf/arm_dsu_pmu.c +1 -0
index bae3ca37f846..ce98bf169574 100644
@@ -751,6 +751,7 @@ static int dsu_pmu_device_probe(struct platform_device *pdev)
 
 	dsu_pmu->pmu = (struct pmu) {
 		.task_ctx_nr	= perf_invalid_context,
+		.parent		= &pdev->dev,
 		.module		= THIS_MODULE,
 		.pmu_enable	= dsu_pmu_enable,
 		.pmu_disable	= dsu_pmu_disable,
Signature · 1 line
2.39.2
#23 lore raw

PATCH v2 22/30 perf/arm-smmuv3: Assign parents for event_source device

In reply to Jonathan Cameron

Currently the PMU device appears directly under /sys/devices/ Only root busses should appear there, so instead assign the pmu->dev parent to be the platform device.

---
 drivers/perf/arm_smmuv3_pmu.c | 1 +
 1 file changed, 1 insertion(+)
drivers/perf/arm_smmuv3_pmu.c +1 -0
index 719aa953a1c4..d5fa92ba8373 100644
@@ -860,6 +860,7 @@ static int smmu_pmu_probe(struct platform_device *pdev)
 
 	smmu_pmu->pmu = (struct pmu) {
 		.module		= THIS_MODULE,
+		.parent		= &pdev->dev,
 		.task_ctx_nr    = perf_invalid_context,
 		.pmu_enable	= smmu_pmu_enable,
 		.pmu_disable	= smmu_pmu_disable,
Signature · 1 line
2.39.2
#24 lore raw

PATCH v2 23/30 perf/arm-spe: Assign parents for event_source device

In reply to Jonathan Cameron

Currently the PMU device appears directly under /sys/devices/ Only root busses should appear there, so instead assign the pmu->dev parent to be the platform device.

---
 drivers/perf/arm_spe_pmu.c | 1 +
 1 file changed, 1 insertion(+)
drivers/perf/arm_spe_pmu.c +1 -0
index 35f0de03416f..9100d82bfabc 100644
@@ -932,6 +932,7 @@ static int arm_spe_pmu_perf_init(struct arm_spe_pmu *spe_pmu)
 
 	spe_pmu->pmu = (struct pmu) {
 		.module = THIS_MODULE,
+		.parent		= &spe_pmu->pdev->dev,
 		.capabilities	= PERF_PMU_CAP_EXCLUSIVE | PERF_PMU_CAP_ITRACE,
 		.attr_groups	= arm_spe_pmu_attr_groups,
 		/*
Signature · 1 line
2.39.2
#25 lore raw

PATCH v2 24/30 arc: Assign parents for event_source devices

In reply to Jonathan Cameron

Currently the PMU device appears directly under /sys/devices/ Only root busses should appear there, so instead assign the pmu->dev parent to be the platform device.

---
 arch/arc/kernel/perf_event.c | 1 +
 1 file changed, 1 insertion(+)
arch/arc/kernel/perf_event.c +1 -0
index adff957962da..bd4c2c110afe 100644
@@ -788,6 +788,7 @@ static int arc_pmu_device_probe(struct platform_device *pdev)
 	arc_pmu->attr_groups[ARCPMU_ATTR_GR_FORMATS] = &arc_pmu_format_attr_gr;
 
 	arc_pmu->pmu = (struct pmu) {
+		.parent		= &pdev->dev,
 		.pmu_enable	= arc_pmu_enable,
 		.pmu_disable	= arc_pmu_disable,
 		.event_init	= arc_pmu_event_init,
Signature · 1 line
2.39.2
#26 lore raw

PATCH v2 25/30 ARM: imx: Assign parents for mmdc event_source devices

In reply to Jonathan Cameron

Currently the PMU device appears directly under /sys/devices/ Only root busses should appear there, so instead assign the pmu->dev parent to be the platform device.

---
 arch/arm/mach-imx/mmdc.c | 1 +
 1 file changed, 1 insertion(+)
arch/arm/mach-imx/mmdc.c +1 -0
index 25893d109190..b68cb86dbe4c 100644
@@ -437,6 +437,7 @@ static int mmdc_pmu_init(struct mmdc_pmu *pmu_mmdc,
 {
 	*pmu_mmdc = (struct mmdc_pmu) {
 		.pmu = (struct pmu) {
+			.parent		= dev,
 			.task_ctx_nr    = perf_invalid_context,
 			.attr_groups    = attr_groups,
 			.event_init     = mmdc_pmu_event_init,
Signature · 1 line
2.39.2
#28 lore raw

PATCH v2 26/30 dmaengine: idxd: Assign parent for event_source device

In reply to Jonathan Cameron

Currently the PMU device appears directly under /sys/devices/ Only root busses should appear there, so instead assign the pmu->dev parent to be the iDXD PCI Device.

---
 drivers/dma/idxd/perfmon.c | 1 +
 1 file changed, 1 insertion(+)
drivers/dma/idxd/perfmon.c +1 -0
index fdda6d604262..fbb586eed0b3 100644
@@ -477,6 +477,7 @@ static void idxd_pmu_init(struct idxd_pmu *idxd_pmu)
 	}
 
 	idxd_pmu->pmu.name		= idxd_pmu->name;
+	idxd_pmu->pmu.parent		= &idxd_pmu->idxd->pdev->dev;
 	idxd_pmu->pmu.attr_groups	= perfmon_attr_groups;
 	idxd_pmu->pmu.task_ctx_nr	= perf_invalid_context;
 	idxd_pmu->pmu.event_init	= perfmon_pmu_event_init;
Signature · 1 line
2.39.2
maintainer Reviewed-by on v2 26/30
#29 lore raw

Re: [PATCH v2 26/30] dmaengine: idxd: Assign parent for event_source device

Quoted 8 lines · Jonathan Cameron

Currently the PMU device appears directly under /sys/devices/ Only root busses should appear there, so instead assign the pmu->dev parent to be the iDXD PCI Device.

Quoted 16 lines
---
 drivers/dma/idxd/perfmon.c | 1 +
 1 file changed, 1 insertion(+)
drivers/dma/idxd/perfmon.c +1 -0
index fdda6d604262..fbb586eed0b3 100644
@@ -477,6 +477,7 @@ static void idxd_pmu_init(struct idxd_pmu *idxd_pmu)
 	}
 
 	idxd_pmu->pmu.name		= idxd_pmu->name;
+	idxd_pmu->pmu.parent		= &idxd_pmu->idxd->pdev->dev;
 	idxd_pmu->pmu.attr_groups	= perfmon_attr_groups;
 	idxd_pmu->pmu.task_ctx_nr	= perf_invalid_context;
 	idxd_pmu->pmu.event_init	= perfmon_pmu_event_init;
Reviewed-by on v2 26/30
#30 lore raw

Re: [PATCH v2 26/30] dmaengine: idxd: Assign parent for event_source device

In reply to Jonathan Cameron

Hi, Jonathan,

Quoted 2 lines · Jonathan Cameron

Currently the PMU device appears directly under /sys/devices/ Only root busses should appear there, so instead assign the pmu->dev

s/busses/buses/

Quoted 1 line

parent to be the iDXD PCI Device.

s/iDXD/IDXD/

Quoted 5 lines

Other than the typos,

Quoted 9 lines
---
  drivers/dma/idxd/perfmon.c | 1 +
  1 file changed, 1 insertion(+)
drivers/dma/idxd/perfmon.c +0 -0
index fdda6d604262..fbb586eed0b3 100644

drivers/dma/idxd/perfmon.c static void idxd_pmu_init(struct idxd_pmu *idxd_pmu) · line 483

Quoted 7 lines
drivers/dma/idxd/perfmon.c +1 -0
@@ -477,6 +477,7 @@ static void idxd_pmu_init(struct idxd_pmu *idxd_pmu)
  	}
 
  	idxd_pmu->pmu.name		= idxd_pmu->name;
+	idxd_pmu->pmu.parent		= &idxd_pmu->idxd->pdev->dev;
  	idxd_pmu->pmu.attr_groups	= perfmon_attr_groups;
  	idxd_pmu->pmu.task_ctx_nr	= perf_invalid_context;
  	idxd_pmu->pmu.event_init	= perfmon_pmu_event_init;

Thanks.

-Fenghua

#31 lore raw

PATCH v2 27/30 fpga: dfl: Assign parent for event_source device

In reply to Jonathan Cameron

Currently the PMU device appears directly under /sys/devices/ Only root busses should appear there, so instead assign the pmu->dev parent to be the Platform device.

---
 drivers/fpga/dfl-fme-perf.c | 1 +
 1 file changed, 1 insertion(+)
drivers/fpga/dfl-fme-perf.c +1 -0
index 7422d2bc6f37..2d59f1c620b1 100644
@@ -912,6 +912,7 @@ static int fme_perf_pmu_register(struct platform_device *pdev,
 
 	fme_perf_setup_hardware(priv);
 
+	pmu->parent =		&pdev->dev;
 	pmu->task_ctx_nr =	perf_invalid_context;
 	pmu->attr_groups =	fme_perf_groups;
 	pmu->attr_update =	fme_perf_events_groups;
Signature · 1 line
2.39.2
#32 lore raw

PATCH v2 28/30 drivers/nvdimm: Assign parent for event_source device

In reply to Jonathan Cameron

Currently the PMU device appears directly under /sys/devices/ Only root busses should appear there, so instead assign the pmu->dev parent to be the platform device.

---
 drivers/nvdimm/nd_perf.c | 1 +
 1 file changed, 1 insertion(+)
drivers/nvdimm/nd_perf.c +1 -0
index 2b6dc80d8fb5..dfc2028b9add 100644
@@ -292,6 +292,7 @@ int register_nvdimm_pmu(struct nvdimm_pmu *nd_pmu, struct platform_device *pdev)
 	 * device data in events functions.
 	 */
 	nd_pmu->dev = &pdev->dev;
+	nd_pmu->pmu.parent = &pdev->dev;
 
 	/* Fill attribute groups for the nvdimm pmu device */
 	nd_pmu->pmu.attr_groups[NVDIMM_PMU_FORMAT_ATTR] = &nvdimm_pmu_format_group;
Signature · 1 line
2.39.2
#33 lore raw

PATCH v2 29/30 Documentation: ABI + trace: hisi_ptt: update paths to bus/event_source

In reply to Jonathan Cameron

To allow for assigning a suitable parent to the struct pmu device update the documentation to describe the device via the event_source bus where it will remain accessible.

For the ABI documention file also rename the file as it is named after the path.

---
 ...i_ptt => sysfs-bus-event_source-devices-hisi_ptt} | 12 ++++++------
 Documentation/trace/hisi-ptt.rst                     |  4 ++--
 MAINTAINERS                                          |  2 +-
 3 files changed, 9 insertions(+), 9 deletions(-)
Documentation/ABI/testing/sysfs-bus-event_source-devices-hisi_ptt renamed from Documentation/ABI/testing/sysfs-devices-hisi_ptt +6 -6
similarity index 90%
rename from Documentation/ABI/testing/sysfs-devices-hisi_ptt
rename to Documentation/ABI/testing/sysfs-bus-event_source-devices-hisi_ptt
index d7e206b4901c..1119766564d7 100644
@@ -1,4 +1,4 @@
-What:		/sys/devices/hisi_ptt<sicl_id>_<core_id>/tune
+What:		/sys/bus/event_source/devices/hisi_ptt<sicl_id>_<core_id>/tune
 Date:		October 2022
 KernelVersion:	6.1
 Contact:	Yicong Yang <[email protected]>
@@ -8,7 +8,7 @@ Description:	This directory contains files for tuning the PCIe link
 
 		See Documentation/trace/hisi-ptt.rst for more information.
 
-What:		/sys/devices/hisi_ptt<sicl_id>_<core_id>/tune/qos_tx_cpl
+What:		/sys/bus/event_source/devices/hisi_ptt<sicl_id>_<core_id>/tune/qos_tx_cpl
 Date:		October 2022
 KernelVersion:	6.1
 Contact:	Yicong Yang <[email protected]>
@@ -18,7 +18,7 @@ Description:	(RW) Controls the weight of Tx completion TLPs, which influence
 		will return an error, and out of range values will be converted
 		to 2. The value indicates a probable level of the event.
 
-What:		/sys/devices/hisi_ptt<sicl_id>_<core_id>/tune/qos_tx_np
+What:		/sys/bus/event_source/devices/hisi_ptt<sicl_id>_<core_id>/tune/qos_tx_np
 Date:		October 2022
 KernelVersion:	6.1
 Contact:	Yicong Yang <[email protected]>
@@ -28,7 +28,7 @@ Description:	(RW) Controls the weight of Tx non-posted TLPs, which influence
 		will return an error, and out of range values will be converted
 		to 2. The value indicates a probable level of the event.
 
-What:		/sys/devices/hisi_ptt<sicl_id>_<core_id>/tune/qos_tx_p
+What:		/sys/bus/event_source/devices/hisi_ptt<sicl_id>_<core_id>/tune/qos_tx_p
 Date:		October 2022
 KernelVersion:	6.1
 Contact:	Yicong Yang <[email protected]>
@@ -38,7 +38,7 @@ Description:	(RW) Controls the weight of Tx posted TLPs, which influence the
 		will return an error, and out of range values will be converted
 		to 2. The value indicates a probable level of the event.
 
-What:		/sys/devices/hisi_ptt<sicl_id>_<core_id>/tune/rx_alloc_buf_level
+What:		/sys/bus/event_source/devices/hisi_ptt<sicl_id>_<core_id>/tune/rx_alloc_buf_level
 Date:		October 2022
 KernelVersion:	6.1
 Contact:	Yicong Yang <[email protected]>
@@ -49,7 +49,7 @@ Description:	(RW) Control the allocated buffer watermark for inbound packets.
 		will return an error, and out of range values will be converted
 		to 2. The value indicates a probable level of the event.
 
-What:		/sys/devices/hisi_ptt<sicl_id>_<core_id>/tune/tx_alloc_buf_level
+What:		/sys/bus/event_source/devices/hisi_ptt<sicl_id>_<core_id>/tune/tx_alloc_buf_level
 Date:		October 2022
 KernelVersion:	6.1
 Contact:	Yicong Yang <[email protected]>
Documentation/trace/hisi-ptt.rst +2 -2
index 989255eb5622..6eef28ebb0c7 100644
@@ -40,7 +40,7 @@ IO dies (SICL, Super I/O Cluster), where there's one PCIe Root
 Complex for each SICL.
 ::
 
-    /sys/devices/hisi_ptt<sicl_id>_<core_id>
+    /sys/bus/event_source/devices/hisi_ptt<sicl_id>_<core_id>
 
 Tune
 ====
@@ -53,7 +53,7 @@ Each event is presented as a file under $(PTT PMU dir)/tune, and
 a simple open/read/write/close cycle will be used to tune the event.
 ::
 
-    $ cd /sys/devices/hisi_ptt<sicl_id>_<core_id>/tune
+    $ cd /sys/bus/event_source/devices/hisi_ptt<sicl_id>_<core_id>/tune
     $ ls
     qos_tx_cpl    qos_tx_np    qos_tx_p
     tx_path_rx_req_alloc_buf_level
MAINTAINERS +1 -1
index aea47e04c3a5..2f0a97aa1e60 100644
@@ -9796,7 +9796,7 @@ M:	Yicong Yang <[email protected]>
 M:	Jonathan Cameron <[email protected]>
 L:	[email protected]
 S:	Maintained
-F:	Documentation/ABI/testing/sysfs-devices-hisi_ptt
+F:	Documentation/ABI/testing/sysfs-bus-event_source-devices-hisi_ptt
 F:	Documentation/trace/hisi-ptt.rst
 F:	drivers/hwtracing/ptt/
 F:	tools/perf/arch/arm64/util/hisi-ptt.c
Signature · 1 line
2.39.2
#34 lore raw

PATCH v2 30/30 hwtracing: hisi_ptt: Assign parent for event_source device

In reply to Jonathan Cameron

Currently the PMU device appears directly under /sys/devices/ Only root busses should appear there, so instead assign the pmu->dev parent to be the PCI device.

---
 drivers/hwtracing/ptt/hisi_ptt.c | 1 +
 1 file changed, 1 insertion(+)
drivers/hwtracing/ptt/hisi_ptt.c +1 -0
index 4bf04a977840..3090479a2979 100644
@@ -1221,6 +1221,7 @@ static int hisi_ptt_register_pmu(struct hisi_ptt *hisi_ptt)
 
 	hisi_ptt->hisi_ptt_pmu = (struct pmu) {
 		.module		= THIS_MODULE,
+		.parent         = &hisi_ptt->pdev->dev,
 		.capabilities	= PERF_PMU_CAP_EXCLUSIVE | PERF_PMU_CAP_NO_EXCLUDE,
 		.task_ctx_nr	= perf_sw_context,
 		.attr_groups	= hisi_ptt_pmu_groups,
Signature · 1 line
2.39.2
Acked-by on v2 30/30
#35 lore raw

Re: [PATCH v2 30/30] hwtracing: hisi_ptt: Assign parent for event_source device

Quoted 17 lines · Jonathan Cameron

Currently the PMU device appears directly under /sys/devices/ Only root busses should appear there, so instead assign the pmu->dev parent to be the PCI device.

---
  drivers/hwtracing/ptt/hisi_ptt.c | 1 +
  1 file changed, 1 insertion(+)
drivers/hwtracing/ptt/hisi_ptt.c +0 -0
index 4bf04a977840..3090479a2979 100644

drivers/hwtracing/ptt/hisi_ptt.c static int hisi_ptt_register_pmu(struct hisi_ptt *hisi_ptt) · line 1227

Quoted 7 lines
drivers/hwtracing/ptt/hisi_ptt.c +1 -0
@@ -1221,6 +1221,7 @@ static int hisi_ptt_register_pmu(struct hisi_ptt *hisi_ptt)
 
  	hisi_ptt->hisi_ptt_pmu = (struct pmu) {
  		.module		= THIS_MODULE,
+		.parent         = &hisi_ptt->pdev->dev,
  		.capabilities	= PERF_PMU_CAP_EXCLUSIVE | PERF_PMU_CAP_NO_EXCLUDE,
  		.task_ctx_nr	= perf_sw_context,
  		.attr_groups	= hisi_ptt_pmu_groups,
maintainer
#36 lore raw
In reply to Jonathan Cameron
Quoted 9 lines · Jonathan Cameron

Robin posted a patch for the cmn and that reminded me that I never sent a v2.

v2: Drop first patch that added a parent to struct pmu as that has been
upstream for a year.
Drop the arm-cmn change as Robin has dealt with that one. Gathered tags.

[...]

Applied drivers/perf parts to will (for-next/perf), thanks!

[01/30] perf/hisi-pcie: Assign parent for event_source device

        https://git.kernel.org/will/c/1fb8950417a4
[02/30] Documentation: hisi-pmu: Drop reference to /sys/devices path
        https://git.kernel.org/will/c/d0412b6ecb4e
[03/30] perf/hisi-uncore: Assign parents for event_source devices
        https://git.kernel.org/will/c/16d417f6c45b
[04/30] Documentation: hns-pmu: Use /sys/bus/event_source/devices paths
        https://git.kernel.org/will/c/eff6af531335
[05/30] perf/hisi-hns3: Assign parents for event_source device
        https://git.kernel.org/will/c/3d957de12c65
[06/30] perf/amlogic: Assign parents for event_source devices
        https://git.kernel.org/will/c/1b7718fcc3f2
[07/30] perf/arm_cspmu: Assign parents for event_source devices
        https://git.kernel.org/will/c/3a1bb75ebc1b
[08/30] Documentation: xgene-pmu: Use /sys/bus/event_source/devices paths
        https://git.kernel.org/will/c/867ba6d204f1
[09/30] perf/xgene: Assign parents for event_source devices
        https://git.kernel.org/will/c/89e34f8bee6c
[10/30] Documentation: thunderx2-pmu: Use /sys/bus/event_source/devices paths
        https://git.kernel.org/will/c/90b4a1a927ee
[11/30] perf/thunderx2: Assign parents for event_source devices
        https://git.kernel.org/will/c/ecb79c21c189
[12/30] perf/riscv: Assign parents for event_source devices
        https://git.kernel.org/will/c/50650e5f3186
[13/30] Documentation: qcom-pmu: Use /sys/bus/event_source/devices paths
        https://git.kernel.org/will/c/556da1343452
[14/30] perf/qcom: Assign parents for event_source devices
        https://git.kernel.org/will/c/6148865dd57c
[15/30] perf/imx_ddr: Assign parents for event_source devices
        https://git.kernel.org/will/c/1d194ab8571b
[16/30] perf/arm_pmu: Assign parents for event_source devices
        https://git.kernel.org/will/c/7bf75431a9ba
[17/30] perf/alibaba_uncore: Assign parents for event_source device
        https://git.kernel.org/will/c/1919bd8e0be0
[18/30] perf/arm-cci: Assign parents for event_source device
        https://git.kernel.org/will/c/e7ec4791f903
[19/30] perf/arm-ccn: Assign parents for event_source device
        https://git.kernel.org/will/c/f4144be05a60
[20/30] perf/arm-dmc620: Assign parents for event_source device
        https://git.kernel.org/will/c/46bed4c740d5
[21/30] perf/arm-dsu: Assign parents for event_source device
        https://git.kernel.org/will/c/bc81ae2efbb3
[22/30] perf/arm-smmuv3: Assign parents for event_source device
        https://git.kernel.org/will/c/a8889fbf16bc
[23/30] perf/arm-spe: Assign parents for event_source device
        https://git.kernel.org/will/c/4052ce07d5d7

Cheers,

Signature · 5 lines
Will

https://fixes.arm64.dev
https://next.arm64.dev
https://will.arm64.dev
#37 lore raw

Re: [PATCH v2 00/30] (subset) Add parents to struct pmu -> dev

In reply to Jonathan Cameron
Quoted 9 lines · Jonathan Cameron

Robin posted a patch for the cmn and that reminded me that I never sent a v2.

v2: Drop first patch that added a parent to struct pmu as that has been
upstream for a year.
Drop the arm-cmn change as Robin has dealt with that one. Gathered tags.

[...]

Applied, subset of patches to coresight/next. thanks!

[29/30] Documentation: ABI + trace: hisi_ptt: update paths to bus/event_source

        https://git.kernel.org/coresight/c/1f82d58ddbe21ed75c04d04403d8268a95e0190a
[30/30] hwtracing: hisi_ptt: Assign parent for event_source device
        https://git.kernel.org/coresight/c/9b47d9982d1de5adf0abcb8f1a400e51d68cca1f

Best regards,

Signature · 1 line
Suzuki K Poulose <[email protected]>