DRAM_SUN50I_H616_TRIM_SIZE
Subsystems (3)
PATCH 1/1 DRAM_SUN50I_H616_TRIM_SIZE
From: lalakii <[email protected]>
Add "DRAM_SUN50I_H616_TRIM_SIZE" option for 1.5gb board.
--- arch/arm/include/asm/arch-sunxi/dram_sun50i_h616.h | 1 + arch/arm/mach-sunxi/Kconfig | 7 +++++++ arch/arm/mach-sunxi/dram_sun50i_h616.c | 11 ++++++++++- 3 files changed, 18 insertions(+), 1 deletion(-)
arch/arm/include/asm/arch-sunxi/dram_sun50i_h616.h +1 -0
@@ -166,6 +166,7 @@ struct dram_config {u8 rows;u8 ranks;u8 bus_full_width; +bool trim_size; };static inline int ns_to_t (int nanoseconds)
arch/arm/mach-sunxi/Kconfig +7 -0
@@ -108,6 +108,13 @@ config DRAM_SUN50I_H616_TPR12 default 0x0 help TPR12 value from vendor DRAM settings. + +config DRAM_SUN50I_H616_TRIM_SIZE + bool "H616 DRAM trim size" + help + Due to unknown issue, some H616 based boards may need to trim + size a bit. + endif config SUN6I_PRCM
arch/arm/mach-sunxi/dram_sun50i_h616.c +10 -1
@@ -1349,8 +1349,15 @@ static unsigned long mctl_calc_size(const struct dram_config *config) {u8 width = config->bus_full_width ?4 :2 ; +unsigned long size; + + size = (1ULL << (config->cols + config->rows +3 )) * width * config->ranks; + +if (config->trim_size) + size = (size *3 ) / (width ==4 ?4 :8 ); +/* 8 banks */ -return (1ULL << (config->cols + config->rows +3 )) * width * config->ranks; +return size; }static const struct dram_para para = {
@@ -1379,6 +1386,8 @@ unsigned long sunxi_dram_init(void)struct sunxi_prcm_reg *const prcm = (struct sunxi_prcm_reg *)SUNXI_PRCM_BASE ;struct dram_config config; +if (IS_ENABLED (CONFIG_DRAM_SUN50I_H616_TRIM_SIZE )) + config.trim_size = true;unsigned long size;setbits_le32 (&prcm->res_cal_ctrl,BIT (8 ));
Signature · 1 line
2.44.0
On Sat, 13 Apr 2024 21:43:52 +0800
[email protected] wrote:
Hi,
thanks for sending a patch!
Quoted 28 lines
From: lalakii <[email protected]>
Add "
DRAM_SUN50I_H616_TRIM_SIZE" option for 1.5gb board.Signed-off-by lalakii <[email protected]>--- arch/arm/include/asm/arch-sunxi/dram_sun50i_h616.h | 1 + arch/arm/mach-sunxi/Kconfig | 7 +++++++ arch/arm/mach-sunxi/dram_sun50i_h616.c | 11 ++++++++++- 3 files changed, 18 insertions(+), 1 deletion(-)arch/arm/include/asm/arch-sunxi/dram_sun50i_h616.h +1
-0@@ -166,6 +166,7 @@ struct dram_config {u8 rows;u8 ranks;u8 bus_full_width; +bool trim_size; };static inline int ns_to_t (int nanoseconds)arch/arm/mach-sunxi/Kconfig +0
-0
arch/arm/mach-sunxi/Kconfig config DRAM_SUN50I_H616_TPR12 · line 115
Quoted 8 lines
arch/arm/mach-sunxi/Kconfig +5
-0@@ -108,6 +108,13 @@ config DRAM_SUN50I_H616_TPR12 default 0x0 help TPR12 value from vendor DRAM settings. + +config DRAM_SUN50I_H616_TRIM_SIZE + bool "H616 DRAM trim size" + help + Due to unknown issue, some H616 based boards may need to trim
Well, it's not really an unknown issue, is it? The problem seems to be that the auto detection code cannot deal with the topology of the 1.5GB DRAM chips.
The general problem with this approach is that it would need to be enabled at build time, which means the generated image will always trim the DRAM size, and would not be universal for each board anymore.
So we need something to auto-detect this situation. Can you describe the failure mode, without this patch? Does the DRAM init code hang or give up already, or does this all pass, and then later on the board hangs or crashes when we try access the missing DRAM area? Maybe a small test access beyond 1.5GB would be able to check for this particular case?
Cheers,
Andre
Quoted 35 lines
arch/arm/mach-sunxi/Kconfig +2
-0+ size a bit. + endif config SUN6I_PRCMarch/arm/mach-sunxi/dram_sun50i_h616.c +10
-1@@ -1349,8 +1349,15 @@ static unsigned long mctl_calc_size(const struct dram_config *config) {u8 width = config->bus_full_width ?4 :2 ; +unsigned long size; + + size = (1ULL << (config->cols + config->rows +3 )) * width * config->ranks; + +if (config->trim_size) + size = (size *3 ) / (width ==4 ?4 :8 ); +/* 8 banks */ -return (1ULL << (config->cols + config->rows +3 )) * width * config->ranks; +return size; }static const struct dram_para para = {@@ -1379,6 +1386,8 @@ unsigned long sunxi_dram_init(void)struct sunxi_prcm_reg *const prcm = (struct sunxi_prcm_reg *)SUNXI_PRCM_BASE ;struct dram_config config; +if (IS_ENABLED (CONFIG_DRAM_SUN50I_H616_TRIM_SIZE )) + config.trim_size = true;unsigned long size;setbits_le32 (&prcm->res_cal_ctrl,BIT (8 ));
Jernej Škrabec
maintainerDne ponedeljek, 15. april 2024 ob 02:22:45 GMT +2 je Andre Przywara napisal(a):
Quoted 52 lines
On Sat, 13 Apr 2024 21:43:52 +0800
[email protected] wrote:Hi,
thanks for sending a patch!
Quoted 28 lines
From: lalakii <[email protected]>
Add "
DRAM_SUN50I_H616_TRIM_SIZE" option for 1.5gb board.Signed-off-by lalakii <[email protected]>--- arch/arm/include/asm/arch-sunxi/dram_sun50i_h616.h | 1 + arch/arm/mach-sunxi/Kconfig | 7 +++++++ arch/arm/mach-sunxi/dram_sun50i_h616.c | 11 ++++++++++- 3 files changed, 18 insertions(+), 1 deletion(-)arch/arm/include/asm/arch-sunxi/dram_sun50i_h616.h +1
-0@@ -166,6 +166,7 @@ struct dram_config {u8 rows;u8 ranks;u8 bus_full_width; +bool trim_size; };static inline int ns_to_t (int nanoseconds)arch/arm/mach-sunxi/Kconfig +0
-0arch/arm/mach-sunxi/Kconfig config DRAM_SUN50I_H616_TPR12 · line 115
Quoted 8 lines
arch/arm/mach-sunxi/Kconfig +5
-0@@ -108,6 +108,13 @@ config DRAM_SUN50I_H616_TPR12 default 0x0 help TPR12 value from vendor DRAM settings. + +config DRAM_SUN50I_H616_TRIM_SIZE + bool "H616 DRAM trim size" + help + Due to unknown issue, some H616 based boards may need to trimWell, it's not really an unknown issue, is it? The problem seems to be that the auto detection code cannot deal with the topology of the 1.5GB DRAM chips.
The general problem with this approach is that it would need to be enabled at build time, which means the generated image will always trim the DRAM size, and would not be universal for each board anymore.
Quoted 6 lines
So we need something to auto-detect this situation. Can you describe the failure mode, without this patch? Does the DRAM init code hang or give up already, or does this all pass, and then later on the board hangs or crashes when we try access the missing DRAM area? Maybe a small test access beyond 1.5GB would be able to check for this particular case?
Vendor DRAM check for 1.5 GB is pretty simple. First, it's checked if 2 GB of RAM is detected. If so, 3 different patterns are written to 0x70000000, 0xa0000000 and 0x80000000 (in that order). Then, pattern from 0xa0000000 is read. If it doesn't match to pattern written to this location, 1.5 GB is assumed.
Best regards,
Jernej
Quoted 42 lines
Cheers,
AndreQuoted 35 lines
arch/arm/mach-sunxi/Kconfig +2
-0+ size a bit. + endif config SUN6I_PRCMarch/arm/mach-sunxi/dram_sun50i_h616.c +10
-1@@ -1349,8 +1349,15 @@ static unsigned long mctl_calc_size(const struct dram_config *config) {u8 width = config->bus_full_width ?4 :2 ; +unsigned long size; + + size = (1ULL << (config->cols + config->rows +3 )) * width * config->ranks; + +if (config->trim_size) + size = (size *3 ) / (width ==4 ?4 :8 ); +/* 8 banks */ -return (1ULL << (config->cols + config->rows +3 )) * width * config->ranks; +return size; }static const struct dram_para para = {@@ -1379,6 +1386,8 @@ unsigned long sunxi_dram_init(void)struct sunxi_prcm_reg *const prcm = (struct sunxi_prcm_reg *)SUNXI_PRCM_BASE ;struct dram_config config; +if (IS_ENABLED (CONFIG_DRAM_SUN50I_H616_TRIM_SIZE )) + config.trim_size = true;unsigned long size;setbits_le32 (&prcm->res_cal_ctrl,BIT (8 ));