Skip to contentSkip to conversation

DRAM_SUN50I_H616_TRIM_SIZE

PATCH In review [email protected] 3 participants 3 messages Apr 13, 2024 – Apr 15, 2024

Subsystems (3)
lore
Share & tools
lore
#0 lore raw

PATCH 1/1 DRAM_SUN50I_H616_TRIM_SIZE

From: lalakii <[email protected]>

Add "DRAM_SUN50I_H616_TRIM_SIZE" option for 1.5gb board.

---
 arch/arm/include/asm/arch-sunxi/dram_sun50i_h616.h |  1 +
 arch/arm/mach-sunxi/Kconfig                        |  7 +++++++
 arch/arm/mach-sunxi/dram_sun50i_h616.c             | 11 ++++++++++-
 3 files changed, 18 insertions(+), 1 deletion(-)
arch/arm/include/asm/arch-sunxi/dram_sun50i_h616.h +1 -0
index a8fdda124a..2d2526fead 100644
@@ -166,6 +166,7 @@ struct dram_config {
 	u8 rows;
 	u8 ranks;
 	u8 bus_full_width;
+	bool trim_size;
 };
 
 static inline int ns_to_t(int nanoseconds)
arch/arm/mach-sunxi/Kconfig +7 -0
index fe89aec6b9..255a498557 100644
@@ -108,6 +108,13 @@ config DRAM_SUN50I_H616_TPR12
 	default 0x0
 	help
 	  TPR12 value from vendor DRAM settings.
+
+config DRAM_SUN50I_H616_TRIM_SIZE
+        bool "H616 DRAM trim size"
+        help
+          Due to unknown issue, some H616 based boards may need to trim
+          size a bit.
+
 endif
 
 config SUN6I_PRCM
arch/arm/mach-sunxi/dram_sun50i_h616.c +10 -1
index 37c139e0ee..4598d60a57 100644
@@ -1349,8 +1349,15 @@ static unsigned long mctl_calc_size(const struct dram_config *config)
 {
 	u8 width = config->bus_full_width ? 4 : 2;
 
+	unsigned long size;
+
+	size = (1ULL << (config->cols + config->rows + 3)) * width * config->ranks;
+
+	if (config->trim_size)
+		size = (size * 3) / (width == 4 ? 4 : 8);
+
 	/* 8 banks */
-	return (1ULL << (config->cols + config->rows + 3)) * width * config->ranks;
+	return size;
 }
 
 static const struct dram_para para = {
@@ -1379,6 +1386,8 @@ unsigned long sunxi_dram_init(void)
 	struct sunxi_prcm_reg *const prcm =
 		(struct sunxi_prcm_reg *)SUNXI_PRCM_BASE;
 	struct dram_config config;
+	if (IS_ENABLED(CONFIG_DRAM_SUN50I_H616_TRIM_SIZE))
+		config.trim_size = true;
 	unsigned long size;
 
 	setbits_le32(&prcm->res_cal_ctrl, BIT(8));
Signature · 1 line
2.44.0
#1 lore raw

On Sat, 13 Apr 2024 21:43:52 +0800
[email protected] wrote:

Hi,

thanks for sending a patch!

Quoted 28 lines

From: lalakii <[email protected]>

Add "DRAM_SUN50I_H616_TRIM_SIZE" option for 1.5gb board.

---
 arch/arm/include/asm/arch-sunxi/dram_sun50i_h616.h |  1 +
 arch/arm/mach-sunxi/Kconfig                        |  7 +++++++
 arch/arm/mach-sunxi/dram_sun50i_h616.c             | 11 ++++++++++-
 3 files changed, 18 insertions(+), 1 deletion(-)
arch/arm/include/asm/arch-sunxi/dram_sun50i_h616.h +1 -0
index a8fdda124a..2d2526fead 100644
@@ -166,6 +166,7 @@ struct dram_config {
 	u8 rows;
 	u8 ranks;
 	u8 bus_full_width;
+	bool trim_size;
 };
 
 static inline int ns_to_t(int nanoseconds)
arch/arm/mach-sunxi/Kconfig +0 -0
index fe89aec6b9..255a498557 100644

arch/arm/mach-sunxi/Kconfig config DRAM_SUN50I_H616_TPR12 · line 115

Quoted 8 lines
arch/arm/mach-sunxi/Kconfig +5 -0
@@ -108,6 +108,13 @@ config DRAM_SUN50I_H616_TPR12
 	default 0x0
 	help
 	  TPR12 value from vendor DRAM settings.
+
+config DRAM_SUN50I_H616_TRIM_SIZE
+        bool "H616 DRAM trim size"
+        help
+          Due to unknown issue, some H616 based boards may need to trim

Well, it's not really an unknown issue, is it? The problem seems to be that the auto detection code cannot deal with the topology of the 1.5GB DRAM chips.

The general problem with this approach is that it would need to be enabled at build time, which means the generated image will always trim the DRAM size, and would not be universal for each board anymore.

So we need something to auto-detect this situation. Can you describe the failure mode, without this patch? Does the DRAM init code hang or give up already, or does this all pass, and then later on the board hangs or crashes when we try access the missing DRAM area? Maybe a small test access beyond 1.5GB would be able to check for this particular case?

Cheers,
Andre

Quoted 35 lines
arch/arm/mach-sunxi/Kconfig +2 -0
+          size a bit.
+
 endif
 
 config SUN6I_PRCM
arch/arm/mach-sunxi/dram_sun50i_h616.c +10 -1
index 37c139e0ee..4598d60a57 100644
@@ -1349,8 +1349,15 @@ static unsigned long mctl_calc_size(const struct dram_config *config)
 {
 	u8 width = config->bus_full_width ? 4 : 2;
 
+	unsigned long size;
+
+	size = (1ULL << (config->cols + config->rows + 3)) * width * config->ranks;
+
+	if (config->trim_size)
+		size = (size * 3) / (width == 4 ? 4 : 8);
+
 	/* 8 banks */
-	return (1ULL << (config->cols + config->rows + 3)) * width * config->ranks;
+	return size;
 }
 
 static const struct dram_para para = {
@@ -1379,6 +1386,8 @@ unsigned long sunxi_dram_init(void)
 	struct sunxi_prcm_reg *const prcm =
 		(struct sunxi_prcm_reg *)SUNXI_PRCM_BASE;
 	struct dram_config config;
+	if (IS_ENABLED(CONFIG_DRAM_SUN50I_H616_TRIM_SIZE))
+		config.trim_size = true;
 	unsigned long size;
 
 	setbits_le32(&prcm->res_cal_ctrl, BIT(8));
maintainer
#2 lore raw

Dne ponedeljek, 15. april 2024 ob 02:22:45 GMT +2 je Andre Przywara napisal(a):

Quoted 52 lines

On Sat, 13 Apr 2024 21:43:52 +0800
[email protected] wrote:

Hi,

thanks for sending a patch!

Quoted 28 lines

From: lalakii <[email protected]>

Add "DRAM_SUN50I_H616_TRIM_SIZE" option for 1.5gb board.

---
 arch/arm/include/asm/arch-sunxi/dram_sun50i_h616.h |  1 +
 arch/arm/mach-sunxi/Kconfig                        |  7 +++++++
 arch/arm/mach-sunxi/dram_sun50i_h616.c             | 11 ++++++++++-
 3 files changed, 18 insertions(+), 1 deletion(-)
arch/arm/include/asm/arch-sunxi/dram_sun50i_h616.h +1 -0
index a8fdda124a..2d2526fead 100644
@@ -166,6 +166,7 @@ struct dram_config {
 	u8 rows;
 	u8 ranks;
 	u8 bus_full_width;
+	bool trim_size;
 };
 
 static inline int ns_to_t(int nanoseconds)
arch/arm/mach-sunxi/Kconfig +0 -0
index fe89aec6b9..255a498557 100644

arch/arm/mach-sunxi/Kconfig config DRAM_SUN50I_H616_TPR12 · line 115

Quoted 8 lines
arch/arm/mach-sunxi/Kconfig +5 -0
@@ -108,6 +108,13 @@ config DRAM_SUN50I_H616_TPR12
 	default 0x0
 	help
 	  TPR12 value from vendor DRAM settings.
+
+config DRAM_SUN50I_H616_TRIM_SIZE
+        bool "H616 DRAM trim size"
+        help
+          Due to unknown issue, some H616 based boards may need to trim

Well, it's not really an unknown issue, is it? The problem seems to be that the auto detection code cannot deal with the topology of the 1.5GB DRAM chips.

The general problem with this approach is that it would need to be enabled at build time, which means the generated image will always trim the DRAM size, and would not be universal for each board anymore.

Quoted 6 lines

So we need something to auto-detect this situation. Can you describe the failure mode, without this patch? Does the DRAM init code hang or give up already, or does this all pass, and then later on the board hangs or crashes when we try access the missing DRAM area? Maybe a small test access beyond 1.5GB would be able to check for this particular case?

Vendor DRAM check for 1.5 GB is pretty simple. First, it's checked if 2 GB of RAM is detected. If so, 3 different patterns are written to 0x70000000, 0xa0000000 and 0x80000000 (in that order). Then, pattern from 0xa0000000 is read. If it doesn't match to pattern written to this location, 1.5 GB is assumed.

Best regards,
Jernej

Quoted 42 lines

Cheers,
Andre

Quoted 35 lines
arch/arm/mach-sunxi/Kconfig +2 -0
+          size a bit.
+
 endif
 
 config SUN6I_PRCM
arch/arm/mach-sunxi/dram_sun50i_h616.c +10 -1
index 37c139e0ee..4598d60a57 100644
@@ -1349,8 +1349,15 @@ static unsigned long mctl_calc_size(const struct dram_config *config)
 {
 	u8 width = config->bus_full_width ? 4 : 2;
 
+	unsigned long size;
+
+	size = (1ULL << (config->cols + config->rows + 3)) * width * config->ranks;
+
+	if (config->trim_size)
+		size = (size * 3) / (width == 4 ? 4 : 8);
+
 	/* 8 banks */
-	return (1ULL << (config->cols + config->rows + 3)) * width * config->ranks;
+	return size;
 }
 
 static const struct dram_para para = {
@@ -1379,6 +1386,8 @@ unsigned long sunxi_dram_init(void)
 	struct sunxi_prcm_reg *const prcm =
 		(struct sunxi_prcm_reg *)SUNXI_PRCM_BASE;
 	struct dram_config config;
+	if (IS_ENABLED(CONFIG_DRAM_SUN50I_H616_TRIM_SIZE))
+		config.trim_size = true;
 	unsigned long size;
 
 	setbits_le32(&prcm->res_cal_ctrl, BIT(8));