ASoC: dt-bindings: omap-mcpdm: Convert to DT schema

From: Mithil Bavishi <[email protected]>

Convert the OMAP4+ McPDM bindings to DT schema.

---
 .../devicetree/bindings/sound/omap-mcpdm.txt  | 30 ----------
 .../bindings/sound/ti,omap4-mcpdm.yaml        | 58 +++++++++++++++++++
 2 files changed, 58 insertions(+), 30 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/sound/omap-mcpdm.txt
 create mode 100644 Documentation/devicetree/bindings/sound/ti,omap4-mcpdm.yaml

deleted file mode 100644
index ff98a0cb5..000000000
@@ -1,30 +0,0 @@
-* Texas Instruments OMAP4+ McPDM
-
-Required properties:
-- compatible: "ti,omap4-mcpdm"
-- reg: Register location and size as an array:
-       <MPU access base address, size>,
-       <L3 interconnect address, size>;
-- interrupts: Interrupt number for McPDM
-- ti,hwmods: Name of the hwmod associated to the McPDM
-- clocks:  phandle for the pdmclk provider, likely <&twl6040>
-- clock-names: Must be "pdmclk"
-
-Example:
-
-mcpdm: mcpdm@40132000 {
-	compatible = "ti,omap4-mcpdm";
-	reg = <0x40132000 0x7f>, /* MPU private access */
-	      <0x49032000 0x7f>; /* L3 Interconnect */
-	interrupts = <0 112 0x4>;
-	interrupt-parent = <&gic>;
-	ti,hwmods = "mcpdm";
-};
-
-In board DTS file the pdmclk needs to be added:
-
-&mcpdm {
-	clocks = <&twl6040>;
-	clock-names = "pdmclk";
-	status = "okay";
-};

2.34.1

My bot found errors running 'make dt_binding_check' on your patch:

yamllint warnings/errors:

dtschema/dtc warnings/errors:
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/sound/ti,omap4-mcpdm.yaml: $id: Cannot determine base path from $id, relative path/filename doesn't match actual path or filename
$id: http://devicetree.org/schemas/sound/ti,omap-mcpdm.yaml
file: /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/sound/ti,omap4-mcpdm.yaml

doc reference errors (make refcheckdocs):

See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/[email protected]

The base for the series is generally the latest rc1. A different dependency should be noted in *this* patch.

If you already ran 'make dt_binding_check' and didn't see the above error(s), then make sure 'yamllint' is installed and dt-schema is up to date:

pip3 install dtschema --upgrade

Please check and re-submit after running the above command yourself. Note that DT_SCHEMA_FILES can be set to your schema file to speed up checking your schema. However, it must be unset to test all examples with your schema.

Right forgot to rename it to omap4 in the id, should i send a patch v4 in a new mail?

Best Regards,
Mithil