Skip to contentSkip to conversation

I/O errors for ALUA state transitions

PATCH Superseded Martin Wilck 5 participants 6 messages May 8, 2024 – May 13, 2024 SCSI

v4 of 5 Superseded Latest is v5 →

lore
Share & tools
lore
#0 lore raw

PATCH v4 1/1 I/O errors for ALUA state transitions

From: Rajashekhar M A <[email protected]>

When a host is configured with a few LUNs and IO is running, injecting FC faults repeatedly leads to path recovery problems. The LUNs have 4 paths each and 3 of them come back active after say an FC fault which makes two of the paths go down, instead of all 4. This happens after several iterations of continuous FC faults.

Reason here is that we're returning an I/O error whenever we're encountering sense code 06/04/0a (LOGICAL UNIT NOT ACCESSIBLE, ASYMMETRIC ACCESS STATE TRANSITION) instead of retrying.

mwilck: Moved this code to alua_check_sense() as suggested by Mike Christie [1]. Evan Milne had raised the question whether pg->state should be set to transitioning in the UA case [2]. I believe that doing this is correct. SCSI_ACCESS_STATE_TRANSITIONING by itself doesn't cause I/O errors. Our handler schedules an RTPG, which will only result in an I/O error condition if the transitioning timeout expires.

[1] https://lore.kernel.org/all/[email protected]/
[2] https://lore.kernel.org/all/CAGtn9r=kicnTDE2o7Gt5Y=yoidHYD7tG8XdMHEBJTBraVEoOCw@mail.gmail.com/

---
Changes v3->v4:
- fix a whitespace error (Damien Le Moal)
Changes v2->v3:
- drop return value of alua_handle_state_transition() (Christoph Hellwig)
- handle UNIT ATTENTION in alua_tur(), too (Mike Christie)
- restore comment in alua_check_sense() (Damien Le Moal)

---
 drivers/scsi/device_handler/scsi_dh_alua.c | 31 +++++++++++++++-------
 1 file changed, 22 insertions(+), 9 deletions(-)
drivers/scsi/device_handler/scsi_dh_alua.c +22 -9
index a226dc1b65d7..4eb0837298d4 100644
@@ -414,28 +414,40 @@ static char print_alua_state(unsigned char state)
 	}
 }
 
-static enum scsi_disposition alua_check_sense(struct scsi_device *sdev,
-					      struct scsi_sense_hdr *sense_hdr)
+static void alua_handle_state_transition(struct scsi_device *sdev)
 {
 	struct alua_dh_data *h = sdev->handler_data;
 	struct alua_port_group *pg;
 
+	rcu_read_lock();
+	pg = rcu_dereference(h->pg);
+	if (pg)
+		pg->state = SCSI_ACCESS_STATE_TRANSITIONING;
+	rcu_read_unlock();
+	alua_check(sdev, false);
+}
+
+static enum scsi_disposition alua_check_sense(struct scsi_device *sdev,
+					      struct scsi_sense_hdr *sense_hdr)
+{
 	switch (sense_hdr->sense_key) {
 	case NOT_READY:
 		if (sense_hdr->asc == 0x04 && sense_hdr->ascq == 0x0a) {
 			/*
 			 * LUN Not Accessible - ALUA state transition
 			 */
-			rcu_read_lock();
-			pg = rcu_dereference(h->pg);
-			if (pg)
-				pg->state = SCSI_ACCESS_STATE_TRANSITIONING;
-			rcu_read_unlock();
-			alua_check(sdev, false);
+			alua_handle_state_transition(sdev);
 			return NEEDS_RETRY;
 		}
 		break;
 	case UNIT_ATTENTION:
+		if (sense_hdr->asc == 0x04 && sense_hdr->ascq == 0x0a) {
+			/*
+			 * LUN Not Accessible - ALUA state transition
+			 */
+			alua_handle_state_transition(sdev);
+			return NEEDS_RETRY;
+		}
 		if (sense_hdr->asc == 0x29 && sense_hdr->ascq == 0x00) {
 			/*
 			 * Power On, Reset, or Bus Device Reset.
@@ -502,7 +514,8 @@ static int alua_tur(struct scsi_device *sdev)
 
 	retval = scsi_test_unit_ready(sdev, ALUA_FAILOVER_TIMEOUT * HZ,
 				      ALUA_FAILOVER_RETRIES, &sense_hdr);
-	if (sense_hdr.sense_key == NOT_READY &&
+	if ((sense_hdr.sense_key == NOT_READY ||
+	     sense_hdr.sense_key == UNIT_ATTENTION) &&
 	    sense_hdr.asc == 0x04 && sense_hdr.ascq == 0x0a)
 		return SCSI_DH_RETRY;
 	else if (retval)
Signature · 1 line
2.44.0
Reviewed-by on v4 1/1
#2 lore raw
In reply to Martin Wilck
Quoted 19 lines · Martin Wilck

From: Rajashekhar M A <[email protected]>

When a host is configured with a few LUNs and IO is running, injecting FC faults repeatedly leads to path recovery problems. The LUNs have 4 paths each and 3 of them come back active after say an FC fault which makes two of the paths go down, instead of all 4. This happens after several iterations of continuous FC faults.

Reason here is that we're returning an I/O error whenever we're encountering sense code 06/04/0a (LOGICAL UNIT NOT ACCESSIBLE, ASYMMETRIC ACCESS STATE TRANSITION) instead of retrying.

mwilck: Moved this code to alua_check_sense() as suggested by Mike Christie [1]. Evan Milne had raised the question whether pg->state should be set to transitioning in the UA case [2]. I believe that doing this is correct. SCSI_ACCESS_STATE_TRANSITIONING by itself doesn't cause I/O errors. Our handler schedules an RTPG, which will only result in an I/O error condition if the transitioning timeout expires.

Quoted 7 lines

[1] https://lore.kernel.org/all/[email protected]/
[2] https://lore.kernel.org/all/CAGtn9r=kicnTDE2o7Gt5Y=yoidHYD7tG8XdMHEBJTBraVEoOCw@mail.gmail.com/

---

#4 lore raw
Quoted 7 lines · Martin K. Petersen

Hi Martin!

Quoted 1 line

From: Rajashekhar M A <[email protected]>

I can't really apply this without a formal SoB from Rajashekhar.

This will be difficult, as this email is outdated and he's apparently not with NetApp any more.

The patch looks very different now from what he originally submitted. Would it be acceptable if I resubmit with myself and Hannes as patch authors and him in a Co-authored-by: ?

Martin

#5 lore raw

Martin,

Quoted 2 lines

Would it be acceptable if I resubmit with myself and Hannes as patch authors and him in a Co-authored-by: ?

Given the nature of how this patch has developed over time, sure.

Signature · 1 line
Martin K. Petersen	Oracle Linux Engineering