Skip to contentSkip to conversation

Increased address space for 64 bit

PATCH Superseded [email protected] 3 participants 15 messages May 28, 2024 – May 30, 2024

Subsystems (2)

v1 of 9 Superseded Latest is v9 →

lore
Share & tools
lore
#0 lore raw

cover Increased address space for 64 bit

From: Benjamin Berg <[email protected]>

This patchset fixes a few bugs, adds a new method of discovering the host task size and finally adds four level page table support. All of this means the userspace TASK_SIZE is much larger and in turns permits userspace applications that need a lot of virtual addresses to work fine.

One such application is ASAN which uses a fixed address in memory that would otherwise not be addressable.

Benjamin Berg (5):
um: Fix stub_start address calculation
um: Limit TASK_SIZE to the addressable range
um: Do a double clone to disable rseq
um: Discover host_task_size from envp
um: Add 4 level page table support

 arch/um/Kconfig                      |   1 +
 arch/um/include/asm/page.h           |  14 +++-
 arch/um/include/asm/pgalloc.h        |  11 ++-
 arch/um/include/asm/pgtable-4level.h | 119 +++++++++++++++++++++++++++
 arch/um/include/asm/pgtable.h        |   6 +-
 arch/um/include/shared/as-layout.h   |   2 +-
 arch/um/include/shared/os.h          |   2 +-
 arch/um/kernel/mem.c                 |  17 +++-
 arch/um/kernel/um_arch.c             |  14 +++-
 arch/um/os-Linux/main.c              |   9 +-
 arch/um/os-Linux/skas/process.c      |  54 +++++++++++-
 arch/x86/um/Kconfig                  |  38 ++++++---
 arch/x86/um/os-Linux/task_size.c     |  19 ++++-
 13 files changed, 274 insertions(+), 32 deletions(-)
 create mode 100644 arch/um/include/asm/pgtable-4level.h
Signature · 1 line
2.45.1
#1 lore raw

PATCH 1/5 um: Fix stub_start address calculation

From: Benjamin Berg <[email protected]>

The calculation was wrong as it only subtracted one and then rounded down for alignment. However, this is incorrect if host_task_size is not already aligned.

This probably worked fine because on 64 bit the host_task_size is bigger than returned by os_get_top_address.

---
 arch/um/kernel/um_arch.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)
arch/um/kernel/um_arch.c +2 -1
index e95f805e5004..0d8b1a73cd5b 100644
@@ -331,7 +331,8 @@ int __init linux_main(int argc, char **argv)
 	/* reserve a few pages for the stubs (taking care of data alignment) */
 	/* align the data portion */
 	BUILD_BUG_ON(!is_power_of_2(STUB_DATA_PAGES));
-	stub_start = (host_task_size - 1) & ~(STUB_DATA_PAGES * PAGE_SIZE - 1);
+	stub_start = (host_task_size - STUB_DATA_PAGES * PAGE_SIZE) &
+		     ~(STUB_DATA_PAGES * PAGE_SIZE - 1);
 	/* another page for the code portion */
 	stub_start -= PAGE_SIZE;
 	host_task_size = stub_start;
Signature · 1 line
2.45.1
#2 lore raw

PATCH 2/5 um: Limit TASK_SIZE to the addressable range

In reply to [email protected]

From: Benjamin Berg <[email protected]>

We may have a TASK_SIZE from the host that is bigger than UML is able to address with a three-level pagetable. Guard against that by clipping the maximum TASK_SIZE to the maximum addressable area.

---
 arch/um/kernel/um_arch.c | 7 ++++++-
 1 file changed, 6 insertions(+), 1 deletion(-)
arch/um/kernel/um_arch.c +6 -1
index 0d8b1a73cd5b..5ab1a92b6bf7 100644
@@ -337,11 +337,16 @@ int __init linux_main(int argc, char **argv)
 	stub_start -= PAGE_SIZE;
 	host_task_size = stub_start;
 
+	/* Limit TASK_SIZE to what is addressable by the page table */
+	task_size = host_task_size;
+	if (task_size > PTRS_PER_PGD * PGDIR_SIZE)
+		task_size = PTRS_PER_PGD * PGDIR_SIZE;
+
 	/*
 	 * TASK_SIZE needs to be PGDIR_SIZE aligned or else exit_mmap craps
 	 * out
 	 */
-	task_size = host_task_size & PGDIR_MASK;
+	task_size = task_size & PGDIR_MASK;
 
 	/* OS sanity checks that need to happen before the kernel runs */
 	os_early_checks();
Signature · 1 line
2.45.1
#3 lore raw

PATCH 3/5 um: Do a double clone to disable rseq

In reply to [email protected]

From: Benjamin Berg <[email protected]>

Newer glibc versions are enabling rseq support by default. This remains enabled in the cloned child process, potentially causing the host kernel to write/read memory in the child.

It appears that this was purely not an issue because the used memory area happened to be above TASK_SIZE and remains mapped.

Note that a better approach would be to exec a small static binary that does not link with other libraries. Using a memfd and execveat the binary could be embedded into UML itself and it would result in an entirely clean execution environment for userspace.

---
 arch/um/os-Linux/skas/process.c | 54 ++++++++++++++++++++++++++++++---
 1 file changed, 50 insertions(+), 4 deletions(-)
arch/um/os-Linux/skas/process.c +50 -4
index 41a288dcfc34..ee332a2aeea6 100644
@@ -255,6 +255,31 @@ static int userspace_tramp(void *stack)
 int userspace_pid[NR_CPUS];
 int kill_userspace_mm[NR_CPUS];
 
+struct tramp_data {
+	int pid;
+	void *clone_sp;
+	void *stack;
+};
+
+static int userspace_tramp_clone_vm(void *data)
+{
+	struct tramp_data *tramp_data = data;
+
+	/*
+	 * This helper exist to do a double-clone. First with CLONE_VM which
+	 * effectively disables things like rseq, and then the second one to
+	 * get a new memory space.
+	 */
+
+	tramp_data->pid = clone(userspace_tramp, tramp_data->clone_sp,
+				CLONE_PARENT | CLONE_FILES | SIGCHLD,
+				tramp_data->stack);
+	if (tramp_data->pid < 0)
+		tramp_data->pid = -errno;
+
+	exit(0);
+}
+
 /**
  * start_userspace() - prepare a new userspace process
  * @stub_stack:	pointer to the stub stack.
@@ -268,9 +293,10 @@ int kill_userspace_mm[NR_CPUS];
  */
 int start_userspace(unsigned long stub_stack)
 {
+	struct tramp_data tramp_data;
 	void *stack;
 	unsigned long sp;
-	int pid, status, n, flags, err;
+	int pid, status, n, err;
 
 	/* setup a temporary stack page */
 	stack = mmap(NULL, UM_KERN_PAGE_SIZE,
@@ -286,10 +312,13 @@ int start_userspace(unsigned long stub_stack)
 	/* set stack pointer to the end of the stack page, so it can grow downwards */
 	sp = (unsigned long)stack + UM_KERN_PAGE_SIZE;
 
-	flags = CLONE_FILES | SIGCHLD;
+	tramp_data.stack = (void *) stub_stack;
+	tramp_data.clone_sp = (void *) sp;
+	tramp_data.pid = -EINVAL;
 
 	/* clone into new userspace process */
-	pid = clone(userspace_tramp, (void *) sp, flags, (void *) stub_stack);
+	pid = clone(userspace_tramp_clone_vm, (void *) sp,
+		    CLONE_VM | CLONE_FILES | SIGCHLD, &tramp_data);
 	if (pid < 0) {
 		err = -errno;
 		printk(UM_KERN_ERR "%s : clone failed, errno = %d\n",
@@ -305,7 +334,24 @@ int start_userspace(unsigned long stub_stack)
 			       __func__, errno);
 			goto out_kill;
 		}
-	} while (WIFSTOPPED(status) && (WSTOPSIG(status) == SIGALRM));
+	} while (!WIFEXITED(status));
+
+	pid = tramp_data.pid;
+	if (pid < 0) {
+		printk(UM_KERN_ERR "%s : second clone failed, errno = %d\n",
+		       __func__, -pid);
+		return pid;
+	}
+
+	do {
+		CATCH_EINTR(n = waitpid(pid, &status, WUNTRACED | __WALL));
+		if (n < 0) {
+			err = -errno;
+			printk(UM_KERN_ERR "%s : wait failed, errno = %d\n",
+			       __func__, errno);
+			goto out_kill;
+		}
+	} while (WIFEXITED(status) && (WSTOPSIG(status) == SIGALRM));
 
 	if (!WIFSTOPPED(status) || (WSTOPSIG(status) != SIGSTOP)) {
 		err = -EINVAL;
Signature · 1 line
2.45.1
#4 lore raw

Re: [PATCH 3/5] um: Do a double clone to disable rseq

Quoted 8 lines · On 5/28/24 4:54 PM, [email protected] wrote:

From: Benjamin Berg <[email protected]>

Newer glibc versions are enabling rseq support by default. This remains enabled in the cloned child process, potentially causing the host kernel to write/read memory in the child.

It appears that this was purely not an issue because the used memory area happened to be above TASK_SIZE and remains mapped.

I also encountered this issue. In my case, with "Force a static link" (CONFIG_STATIC_LINK) enabled, UML will crash immediately every time it starts up. I worked around this by setting the glibc.pthread.rseq tunable via GLIBC_TUNABLES [1] before launching UML.

So another easy way to work around this issue without introducing runtime overhead might be to add the GLIBC_TUNABLES=glibc.pthread.rseq=0 environment variable and exec /proc/self/exe in UML on startup.

[1] https://www.gnu.org/software/libc/manual/html_node/Tunables.html

Regards,
Tiwei

Quoted 101 lines

Note that a better approach would be to exec a small static binary that does not link with other libraries. Using a memfd and execveat the binary could be embedded into UML itself and it would result in an entirely clean execution environment for userspace.

---
 arch/um/os-Linux/skas/process.c | 54 ++++++++++++++++++++++++++++++---
 1 file changed, 50 insertions(+), 4 deletions(-)
arch/um/os-Linux/skas/process.c +50 -4
index 41a288dcfc34..ee332a2aeea6 100644
@@ -255,6 +255,31 @@ static int userspace_tramp(void *stack)
 int userspace_pid[NR_CPUS];
 int kill_userspace_mm[NR_CPUS];
 
+struct tramp_data {
+	int pid;
+	void *clone_sp;
+	void *stack;
+};
+
+static int userspace_tramp_clone_vm(void *data)
+{
+	struct tramp_data *tramp_data = data;
+
+	/*
+	 * This helper exist to do a double-clone. First with CLONE_VM which
+	 * effectively disables things like rseq, and then the second one to
+	 * get a new memory space.
+	 */
+
+	tramp_data->pid = clone(userspace_tramp, tramp_data->clone_sp,
+				CLONE_PARENT | CLONE_FILES | SIGCHLD,
+				tramp_data->stack);
+	if (tramp_data->pid < 0)
+		tramp_data->pid = -errno;
+
+	exit(0);
+}
+
 /**
  * start_userspace() - prepare a new userspace process
  * @stub_stack:	pointer to the stub stack.
@@ -268,9 +293,10 @@ int kill_userspace_mm[NR_CPUS];
  */
 int start_userspace(unsigned long stub_stack)
 {
+	struct tramp_data tramp_data;
 	void *stack;
 	unsigned long sp;
-	int pid, status, n, flags, err;
+	int pid, status, n, err;
 
 	/* setup a temporary stack page */
 	stack = mmap(NULL, UM_KERN_PAGE_SIZE,
@@ -286,10 +312,13 @@ int start_userspace(unsigned long stub_stack)
 	/* set stack pointer to the end of the stack page, so it can grow downwards */
 	sp = (unsigned long)stack + UM_KERN_PAGE_SIZE;
 
-	flags = CLONE_FILES | SIGCHLD;
+	tramp_data.stack = (void *) stub_stack;
+	tramp_data.clone_sp = (void *) sp;
+	tramp_data.pid = -EINVAL;
 
 	/* clone into new userspace process */
-	pid = clone(userspace_tramp, (void *) sp, flags, (void *) stub_stack);
+	pid = clone(userspace_tramp_clone_vm, (void *) sp,
+		    CLONE_VM | CLONE_FILES | SIGCHLD, &tramp_data);
 	if (pid < 0) {
 		err = -errno;
 		printk(UM_KERN_ERR "%s : clone failed, errno = %d\n",
@@ -305,7 +334,24 @@ int start_userspace(unsigned long stub_stack)
 			       __func__, errno);
 			goto out_kill;
 		}
-	} while (WIFSTOPPED(status) && (WSTOPSIG(status) == SIGALRM));
+	} while (!WIFEXITED(status));
+
+	pid = tramp_data.pid;
+	if (pid < 0) {
+		printk(UM_KERN_ERR "%s : second clone failed, errno = %d\n",
+		       __func__, -pid);
+		return pid;
+	}
+
+	do {
+		CATCH_EINTR(n = waitpid(pid, &status, WUNTRACED | __WALL));
+		if (n < 0) {
+			err = -errno;
+			printk(UM_KERN_ERR "%s : wait failed, errno = %d\n",
+			       __func__, errno);
+			goto out_kill;
+		}
+	} while (WIFEXITED(status) && (WSTOPSIG(status) == SIGALRM));
 
 	if (!WIFSTOPPED(status) || (WSTOPSIG(status) != SIGSTOP)) {
 		err = -EINVAL;
#5 lore raw

Re: [PATCH 3/5] um: Do a double clone to disable rseq

Hi Tiwei,

Quoted 10 lines · Tiwei Bie
Quoted 8 lines · On 5/28/24 4:54 PM, [email protected] wrote:

From: Benjamin Berg <[email protected]>

Newer glibc versions are enabling rseq support by default. This remains enabled in the cloned child process, potentially causing the host kernel to write/read memory in the child.

It appears that this was purely not an issue because the used memory area happened to be above TASK_SIZE and remains mapped.

Quoted 8 lines

I also encountered this issue. In my case, with "Force a static link" (CONFIG_STATIC_LINK) enabled, UML will crash immediately every time it starts up. I worked around this by setting the glibc.pthread.rseq tunable via GLIBC_TUNABLES [1] before launching UML.

So another easy way to work around this issue without introducing runtime overhead might be to add the GLIBC_TUNABLES=glibc.pthread.rseq=0 environment variable and exec /proc/self/exe in UML on startup.

I am not really worried about the overhead, but I agree that setting GLIBC_TUNABLES is also a reasonable solution to the problem.

Doing the memfd/execveat dance with an embedded static binary would still be best in my view, but either this or GLIBC_TUNABLES seem fine in the meantime.

Do you want to submit the patch? Should I re-roll the patchset with GLIBC_TUNABLES?

Benjamin

Quoted 108 lines

[1] https://www.gnu.org/software/libc/manual/html_node/Tunables.html

Regards,
Tiwei

Quoted 101 lines

Note that a better approach would be to exec a small static binary that does not link with other libraries. Using a memfd and execveat the binary could be embedded into UML itself and it would result in an entirely clean execution environment for userspace.

---
 arch/um/os-Linux/skas/process.c | 54 ++++++++++++++++++++++++++++++---

 1 file changed, 50 insertions(+), 4 deletions(-)
arch/um/os-Linux/skas/process.c +0 -0
index 41a288dcfc34..ee332a2aeea6 100644
@@ -255,6 +255,31 @@ static int userspace_tramp(void *stack)
  int userspace_pid[NR_CPUS];
  int kill_userspace_mm[NR_CPUS];

arch/um/os-Linux/skas/process.c +25 -0
+struct tramp_data {
+	int pid;
+	void *clone_sp;
+	void *stack;
+};
+
+static int userspace_tramp_clone_vm(void *data)
+{
+	struct tramp_data *tramp_data = data;
+
+	/*
+	 * This helper exist to do a double-clone. First with CLONE_VM which
+	 * effectively disables things like rseq, and then the second one to
+	 * get a new memory space.
+	 */
+
+	tramp_data->pid = clone(userspace_tramp, tramp_data->clone_sp,
+				CLONE_PARENT | CLONE_FILES | SIGCHLD,
+				tramp_data->stack);
+	if (tramp_data->pid < 0)
+		tramp_data->pid = -errno;
+
+	exit(0);
+}
+

 /**
  * start_userspace() - prepare a new userspace process
  * @stub_stack: pointer to the stub stack.

arch/um/os-Linux/skas/process.c +2 -1
@@ -268,9 +293,10 @@ int kill_userspace_mm[NR_CPUS];
   */
  int start_userspace(unsigned long stub_stack)
  {
+	struct tramp_data tramp_data;
  	void *stack;
  	unsigned long sp;
-	int pid, status, n, flags, err;
+	int pid, status, n, err;


  /* setup a temporary stack page */
  stack = mmap(NULL, UM_KERN_PAGE_SIZE,

arch/um/os-Linux/skas/process.c +0 -0
@@ -286,10 +312,13 @@ int start_userspace(unsigned long stub_stack)
  	/* set stack pointer to the end of the stack page, so it can grow downwards */
  	sp = (unsigned long)stack + UM_KERN_PAGE_SIZE;

arch/um/os-Linux/skas/process.c +3 -1
-	flags = CLONE_FILES | SIGCHLD;
+	tramp_data.stack = (void *) stub_stack;
+	tramp_data.clone_sp = (void *) sp;
+	tramp_data.pid = -EINVAL;


  /* clone into new userspace process */

arch/um/os-Linux/skas/process.c +2 -1
-	pid = clone(userspace_tramp, (void *) sp, flags, (void *) stub_stack);
+	pid = clone(userspace_tramp_clone_vm, (void *) sp,
+		    CLONE_VM | CLONE_FILES | SIGCHLD, &tramp_data);

  if (pid < 0) {
  err = -errno;
  printk(UM_KERN_ERR "%s : clone failed, errno = %d\n",

arch/um/os-Linux/skas/process.c +18 -1
@@ -305,7 +334,24 @@ int start_userspace(unsigned long stub_stack)
  			       __func__, errno);
  			goto out_kill;
  		}
-	} while (WIFSTOPPED(status) && (WSTOPSIG(status) == SIGALRM));
+	} while (!WIFEXITED(status));
+
+	pid = tramp_data.pid;
+	if (pid < 0) {
+		printk(UM_KERN_ERR "%s : second clone failed, errno = %d\n",
+		       __func__, -pid);
+		return pid;
+	}
+
+	do {
+		CATCH_EINTR(n = waitpid(pid, &status, WUNTRACED | __WALL));
+		if (n < 0) {
+			err = -errno;
+			printk(UM_KERN_ERR "%s : wait failed, errno = %d\n",
+			       __func__, errno);
+			goto out_kill;
+		}
+	} while (WIFEXITED(status) && (WSTOPSIG(status) == SIGALRM));


  if (!WIFSTOPPED(status) || (WSTOPSIG(status) != SIGSTOP)) { err = -EINVAL;

#6 lore raw

Re: [PATCH 3/5] um: Do a double clone to disable rseq

Hi Benjamin,

Quoted 23 lines · Benjamin Berg
Quoted 10 lines · Tiwei Bie
Quoted 8 lines · On 5/28/24 4:54 PM, [email protected] wrote:

From: Benjamin Berg <[email protected]>

Newer glibc versions are enabling rseq support by default. This remains enabled in the cloned child process, potentially causing the host kernel to write/read memory in the child.

It appears that this was purely not an issue because the used memory area happened to be above TASK_SIZE and remains mapped.

Quoted 8 lines

I also encountered this issue. In my case, with "Force a static link" (CONFIG_STATIC_LINK) enabled, UML will crash immediately every time it starts up. I worked around this by setting the glibc.pthread.rseq tunable via GLIBC_TUNABLES [1] before launching UML.

So another easy way to work around this issue without introducing runtime overhead might be to add the GLIBC_TUNABLES=glibc.pthread.rseq=0 environment variable and exec /proc/self/exe in UML on startup.

I am not really worried about the overhead, but I agree that setting GLIBC_TUNABLES is also a reasonable solution to the problem.

Quoted 6 lines

Doing the memfd/execveat dance with an embedded static binary would still be best in my view, but either this or GLIBC_TUNABLES seem fine in the meantime.

Do you want to submit the patch? Should I re-roll the patchset with GLIBC_TUNABLES?

Thanks for asking! :)

I don't have such a patch at the moment. I worked around this issue using a script. I saw that you are already doing execve("/proc/self/exe", ...) in PATCH 4/5. Please just feel free to re-roll the patchset with GLIBC_TUNABLES if you would like to choose this solution.

Regards,
Tiwei

Quoted 111 lines

Benjamin

Quoted 108 lines

[1] https://www.gnu.org/software/libc/manual/html_node/Tunables.html

Regards,
Tiwei

Quoted 101 lines

Note that a better approach would be to exec a small static binary that does not link with other libraries. Using a memfd and execveat the binary could be embedded into UML itself and it would result in an entirely clean execution environment for userspace.

---
 arch/um/os-Linux/skas/process.c | 54 ++++++++++++++++++++++++++++++---

 1 file changed, 50 insertions(+), 4 deletions(-)
arch/um/os-Linux/skas/process.c +0 -0
index 41a288dcfc34..ee332a2aeea6 100644
@@ -255,6 +255,31 @@ static int userspace_tramp(void *stack)
  int userspace_pid[NR_CPUS];
  int kill_userspace_mm[NR_CPUS];

arch/um/os-Linux/skas/process.c +25 -0
+struct tramp_data {
+	int pid;
+	void *clone_sp;
+	void *stack;
+};
+
+static int userspace_tramp_clone_vm(void *data)
+{
+	struct tramp_data *tramp_data = data;
+
+	/*
+	 * This helper exist to do a double-clone. First with CLONE_VM which
+	 * effectively disables things like rseq, and then the second one to
+	 * get a new memory space.
+	 */
+
+	tramp_data->pid = clone(userspace_tramp, tramp_data->clone_sp,
+				CLONE_PARENT | CLONE_FILES | SIGCHLD,
+				tramp_data->stack);
+	if (tramp_data->pid < 0)
+		tramp_data->pid = -errno;
+
+	exit(0);
+}
+

 /**
  * start_userspace() - prepare a new userspace process
  * @stub_stack: pointer to the stub stack.

arch/um/os-Linux/skas/process.c +2 -1
@@ -268,9 +293,10 @@ int kill_userspace_mm[NR_CPUS];
   */
  int start_userspace(unsigned long stub_stack)
  {
+	struct tramp_data tramp_data;
  	void *stack;
  	unsigned long sp;
-	int pid, status, n, flags, err;
+	int pid, status, n, err;


  /* setup a temporary stack page */
  stack = mmap(NULL, UM_KERN_PAGE_SIZE,

arch/um/os-Linux/skas/process.c +0 -0
@@ -286,10 +312,13 @@ int start_userspace(unsigned long stub_stack)
  	/* set stack pointer to the end of the stack page, so it can grow downwards */
  	sp = (unsigned long)stack + UM_KERN_PAGE_SIZE;

arch/um/os-Linux/skas/process.c +3 -1
-	flags = CLONE_FILES | SIGCHLD;
+	tramp_data.stack = (void *) stub_stack;
+	tramp_data.clone_sp = (void *) sp;
+	tramp_data.pid = -EINVAL;


  /* clone into new userspace process */

arch/um/os-Linux/skas/process.c +2 -1
-	pid = clone(userspace_tramp, (void *) sp, flags, (void *) stub_stack);
+	pid = clone(userspace_tramp_clone_vm, (void *) sp,
+		    CLONE_VM | CLONE_FILES | SIGCHLD, &tramp_data);

  if (pid < 0) {
  err = -errno;
  printk(UM_KERN_ERR "%s : clone failed, errno = %d\n",

arch/um/os-Linux/skas/process.c +18 -1
@@ -305,7 +334,24 @@ int start_userspace(unsigned long stub_stack)
  			       __func__, errno);
  			goto out_kill;
  		}
-	} while (WIFSTOPPED(status) && (WSTOPSIG(status) == SIGALRM));
+	} while (!WIFEXITED(status));
+
+	pid = tramp_data.pid;
+	if (pid < 0) {
+		printk(UM_KERN_ERR "%s : second clone failed, errno = %d\n",
+		       __func__, -pid);
+		return pid;
+	}
+
+	do {
+		CATCH_EINTR(n = waitpid(pid, &status, WUNTRACED | __WALL));
+		if (n < 0) {
+			err = -errno;
+			printk(UM_KERN_ERR "%s : wait failed, errno = %d\n",
+			       __func__, errno);
+			goto out_kill;
+		}
+	} while (WIFEXITED(status) && (WSTOPSIG(status) == SIGALRM));


  if (!WIFSTOPPED(status) || (WSTOPSIG(status) != SIGSTOP)) { err = -EINVAL;

maintainer
#7 lore raw

Re: [PATCH 3/5] um: Do a double clone to disable rseq

In reply to Tiwei Bie
Quoted 10 lines · Tiwei Bie
Quoted 8 lines · On 5/28/24 4:54 PM, [email protected] wrote:

From: Benjamin Berg <[email protected]>

Newer glibc versions are enabling rseq support by default. This remains enabled in the cloned child process, potentially causing the host kernel to write/read memory in the child.

It appears that this was purely not an issue because the used memory area happened to be above TASK_SIZE and remains mapped.

Quoted 9 lines

I also encountered this issue. In my case, with "Force a static link" (CONFIG_STATIC_LINK) enabled, UML will crash immediately every time it starts up. I worked around this by setting the glibc.pthread.rseq tunable via GLIBC_TUNABLES [1] before launching UML.

So another easy way to work around this issue without introducing runtime overhead might be to add the GLIBC_TUNABLES=glibc.pthread.rseq=0 environment variable and exec /proc/self/exe in UML on startup.

It's also a bit of a question what to rely on - this would introduce a dependency on glibc behaviour, whereas doing the double-clone proposed here will work purely because of host kernel behaviour, regardless of what part of the system set up rseq, how the tunables work, etc.

johannes

#8 lore raw

Re: [PATCH 3/5] um: Do a double clone to disable rseq

Quoted 21 lines · Johannes Berg
Quoted 10 lines · Tiwei Bie
Quoted 8 lines · On 5/28/24 4:54 PM, [email protected] wrote:

From: Benjamin Berg <[email protected]>

Newer glibc versions are enabling rseq support by default. This remains enabled in the cloned child process, potentially causing the host kernel to write/read memory in the child.

It appears that this was purely not an issue because the used memory area happened to be above TASK_SIZE and remains mapped.

Quoted 9 lines

I also encountered this issue. In my case, with "Force a static link" (CONFIG_STATIC_LINK) enabled, UML will crash immediately every time it starts up. I worked around this by setting the glibc.pthread.rseq tunable via GLIBC_TUNABLES [1] before launching UML.

So another easy way to work around this issue without introducing runtime overhead might be to add the GLIBC_TUNABLES=glibc.pthread.rseq=0 environment variable and exec /proc/self/exe in UML on startup.

Quoted 4 lines

It's also a bit of a question what to rely on - this would introduce a dependency on glibc behaviour, whereas doing the double-clone proposed here will work purely because of host kernel behaviour, regardless of what part of the system set up rseq, how the tunables work, etc.

Makes sense. My previous concern was primarily about the runtime overhead, but after taking a closer look at the patch, I realized that the double-clone won't happen on the critical path, so there shouldn't be any performance issues. I also think the double-clone proposal is better. :)

Regards,
Tiwei

#9 lore raw

Re: [PATCH 3/5] um: Do a double clone to disable rseq

Quoted 27 lines · Tiwei Bie
Quoted 21 lines · Johannes Berg
Quoted 10 lines · Tiwei Bie
Quoted 8 lines · On 5/28/24 4:54 PM, [email protected] wrote:

From: Benjamin Berg <[email protected]>

Newer glibc versions are enabling rseq support by default. This remains enabled in the cloned child process, potentially causing the host kernel to write/read memory in the child.

It appears that this was purely not an issue because the used memory area happened to be above TASK_SIZE and remains mapped.

Quoted 9 lines

I also encountered this issue. In my case, with "Force a static link" (CONFIG_STATIC_LINK) enabled, UML will crash immediately every time it starts up. I worked around this by setting the glibc.pthread.rseq tunable via GLIBC_TUNABLES [1] before launching UML.

So another easy way to work around this issue without introducing runtime overhead might be to add the GLIBC_TUNABLES=glibc.pthread.rseq=0 environment variable and exec /proc/self/exe in UML on startup.

Quoted 4 lines

It's also a bit of a question what to rely on - this would introduce a dependency on glibc behaviour, whereas doing the double-clone proposed here will work purely because of host kernel behaviour, regardless of what part of the system set up rseq, how the tunables work, etc.

Quoted 4 lines

Makes sense. My previous concern was primarily about the runtime overhead, but after taking a closer look at the patch, I realized that the double-clone won't happen on the critical path, so there shouldn't be any performance issues. I also think the double-clone proposal is better. :)

But when combined with this series [1], things might be different.. Double-clone will happen for each new mm context. That's something we might want to avoid.

[1] https://patchwork.ozlabs.org/project/linux-um/list/?series=408104

Regards,
Tiwei

#10 lore raw

Re: [PATCH 3/5] um: Do a double clone to disable rseq

Hi,

Quoted 28 lines · Tiwei Bie
Quoted 27 lines · Tiwei Bie
Quoted 25 lines · Johannes Berg
Quoted 10 lines · Tiwei Bie
Quoted 8 lines · On 5/28/24 4:54 PM, [email protected] wrote:

From: Benjamin Berg <[email protected]>

Newer glibc versions are enabling rseq support by default. This remains enabled in the cloned child process, potentially causing the host kernel to write/read memory in the child.

It appears that this was purely not an issue because the used memory area happened to be above TASK_SIZE and remains mapped.

Quoted 9 lines

I also encountered this issue. In my case, with "Force a static link" (CONFIG_STATIC_LINK) enabled, UML will crash immediately every time it starts up. I worked around this by setting the glibc.pthread.rseq tunable via GLIBC_TUNABLES [1] before launching UML.

So another easy way to work around this issue without introducing runtime overhead might be to add the GLIBC_TUNABLES=glibc.pthread.rseq=0 environment variable and exec /proc/self/exe in UML on startup.

It's also a bit of a question what to rely on - this would introduce a dependency on glibc behaviour, whereas doing the double-clone proposed here will work purely because of host kernel behaviour, regardless of what part of the system set up rseq, how the tunables work, etc.

Quoted 8 lines
Quoted 4 lines

Makes sense. My previous concern was primarily about the runtime overhead, but after taking a closer look at the patch, I realized that the double-clone won't happen on the critical path, so there shouldn't be any performance issues. I also think the double-clone proposal is better. :)

But when combined with this series [1], things might be different.. Double-clone will happen for each new mm context. That's something we might want to avoid.

I cannot believe that this overhead is something to worry about. The CLONE_VM step should be really fast compared to the second clone as it runs in the same MM as the kernel (it is how posix_spawn avoids the fork overhead to execute another process if possible).

Note that using execve in the second step would speed things up even more as the process will then run in a new MM instead of copying the kernel MM and cleaning it.

That said, this patch can be made simpler by using CLONE_VFORK.

Benjamin

Quoted 7 lines

[1] https://patchwork.ozlabs.org/project/linux-um/list/?series=408104

Regards,
Tiwei

#11 lore raw

Re: [PATCH 3/5] um: Do a double clone to disable rseq

Quoted 36 lines · Benjamin Berg

Hi,

Quoted 33 lines · Tiwei Bie
Quoted 31 lines · Tiwei Bie
Quoted 21 lines · Johannes Berg
Quoted 10 lines · Tiwei Bie
Quoted 8 lines · On 5/28/24 4:54 PM, [email protected] wrote:

From: Benjamin Berg <[email protected]>

Newer glibc versions are enabling rseq support by default. This remains enabled in the cloned child process, potentially causing the host kernel to write/read memory in the child.

It appears that this was purely not an issue because the used memory area happened to be above TASK_SIZE and remains mapped.

Quoted 9 lines

I also encountered this issue. In my case, with "Force a static link" (CONFIG_STATIC_LINK) enabled, UML will crash immediately every time it starts up. I worked around this by setting the glibc.pthread.rseq tunable via GLIBC_TUNABLES [1] before launching UML.

So another easy way to work around this issue without introducing runtime overhead might be to add the GLIBC_TUNABLES=glibc.pthread.rseq=0 environment variable and exec /proc/self/exe in UML on startup.

Quoted 4 lines

It's also a bit of a question what to rely on - this would introduce a dependency on glibc behaviour, whereas doing the double-clone proposed here will work purely because of host kernel behaviour, regardless of what part of the system set up rseq, how the tunables work, etc.

Makes sense. My previous concern was primarily about the runtime overhead, but after taking a closer look at the patch, I realized that the double-clone won't happen on the critical path, so there shouldn't be any performance issues. I also think the double-clone proposal is better. :)

Quoted 8 lines
Quoted 3 lines

But when combined with this series [1], things might be different.. Double-clone will happen for each new mm context. That's something we might want to avoid.

I cannot believe that this overhead is something to worry about. The CLONE_VM step should be really fast compared to the second clone as it runs in the same MM as the kernel (it is how posix_spawn avoids the fork overhead to execute another process if possible).

Hmm.. I just think that creating a temporary "thread" every time to do this is perhaps a bit unnecessary. But I also agree that using GLIBC_TUNABLES in UML will introduce a dependency on glibc behaviour, which is undesirable. Honestly, I don't have a strong opinion on this.

Regards,
Tiwei

Quoted 16 lines

Note that using execve in the second step would speed things up even more as the process will then run in a new MM instead of copying the kernel MM and cleaning it.

That said, this patch can be made simpler by using CLONE_VFORK.

Benjamin

Quoted 7 lines

[1] https://patchwork.ozlabs.org/project/linux-um/list/?series=408104

Regards,
Tiwei

#12 lore raw

PATCH 4/5 um: Discover host_task_size from envp

In reply to [email protected]

From: Benjamin Berg <[email protected]>

When loading the UML binary, the host kernel will place the stack at the highest possible address. It will then map the program name and environment variables onto the start of the stack.

As such, an easy way to figure out the host_task_size is to use the highest pointer to an environment variable as a reference.

Ensure that this works by disabling address layout randomization and re-executing UML in case it was enabled.

This increases the available TASK_SIZE for 64 bit UML considerably.

---
 arch/um/include/shared/as-layout.h |  2 +-
 arch/um/include/shared/os.h        |  2 +-
 arch/um/kernel/um_arch.c           |  4 ++--
 arch/um/os-Linux/main.c            |  9 ++++++++-
 arch/x86/um/os-Linux/task_size.c   | 19 +++++++++++++++----
 5 files changed, 27 insertions(+), 9 deletions(-)
arch/um/include/shared/as-layout.h +1 -1
index c22f46a757dc..480bb44ea1f2 100644
@@ -48,7 +48,7 @@ extern unsigned long brk_start;
 extern unsigned long host_task_size;
 extern unsigned long stub_start;
 
-extern int linux_main(int argc, char **argv);
+extern int linux_main(int argc, char **argv, char **envp);
 extern void uml_finishsetup(void);
 
 struct siginfo;
arch/um/include/shared/os.h +1 -1
index aff8906304ea..db644fc67069 100644
@@ -327,7 +327,7 @@ extern int __ignore_sigio_fd(int fd);
 extern int get_pty(void);
 
 /* sys-$ARCH/task_size.c */
-extern unsigned long os_get_top_address(void);
+extern unsigned long os_get_top_address(char **envp);
 
 long syscall(long number, ...);
 
arch/um/kernel/um_arch.c +2 -2
index 5ab1a92b6bf7..046eaf356b28 100644
@@ -305,7 +305,7 @@ static void parse_cache_line(char *line)
 	}
 }
 
-int __init linux_main(int argc, char **argv)
+int __init linux_main(int argc, char **argv, char **envp)
 {
 	unsigned long avail, diff;
 	unsigned long virtmem_size, max_physmem;
@@ -327,7 +327,7 @@ int __init linux_main(int argc, char **argv)
 	if (have_console == 0)
 		add_arg(DEFAULT_COMMAND_LINE_CONSOLE);
 
-	host_task_size = os_get_top_address();
+	host_task_size = os_get_top_address(envp);
 	/* reserve a few pages for the stubs (taking care of data alignment) */
 	/* align the data portion */
 	BUILD_BUG_ON(!is_power_of_2(STUB_DATA_PAGES));
arch/um/os-Linux/main.c +8 -1
index f98ff79cdbf7..9a61b1767795 100644
@@ -11,6 +11,7 @@
 #include <signal.h>
 #include <string.h>
 #include <sys/resource.h>
+#include <sys/personality.h>
 #include <as-layout.h>
 #include <init.h>
 #include <kern_util.h>
@@ -108,6 +109,12 @@ int __init main(int argc, char **argv, char **envp)
 	char **new_argv;
 	int ret, i, err;
 
+	/* Disable randomization and re-exec if it was changed successfully */
+	ret = personality(PER_LINUX | ADDR_NO_RANDOMIZE);
+	if (ret >= 0 && (ret & (PER_LINUX | ADDR_NO_RANDOMIZE)) !=
+			 (PER_LINUX | ADDR_NO_RANDOMIZE))
+		execve("/proc/self/exe", argv, envp);
+
 	set_stklim();
 
 	setup_env_path();
@@ -140,7 +147,7 @@ int __init main(int argc, char **argv, char **envp)
 #endif
 
 	change_sig(SIGPIPE, 0);
-	ret = linux_main(argc, argv);
+	ret = linux_main(argc, argv, envp);
 
 	/*
 	 * Disable SIGPROF - I have no idea why libc doesn't do this or turn
arch/x86/um/os-Linux/task_size.c +15 -4
index 1dc9adc20b1c..33c26291545a 100644
@@ -65,7 +65,7 @@ static int page_ok(unsigned long page)
 	return ok;
 }
 
-unsigned long os_get_top_address(void)
+unsigned long os_get_top_address(char **envp)
 {
 	struct sigaction sa, old;
 	unsigned long bottom = 0;
@@ -142,10 +142,21 @@ unsigned long os_get_top_address(void)
 
 #else
 
-unsigned long os_get_top_address(void)
+unsigned long os_get_top_address(char **envp)
 {
-	/* The old value of CONFIG_TOP_ADDR */
-	return 0x7fc0002000;
+	unsigned long top_addr = (unsigned long) &top_addr;
+	int i;
+
+	/* The earliest variable should be after the program name in ELF */
+	for (i = 0; envp[i]; i++) {
+		if ((unsigned long) envp[i] > top_addr)
+			top_addr = (unsigned long) envp[i];
+	}
+
+	top_addr &= ~(UM_KERN_PAGE_SIZE - 1);
+	top_addr += UM_KERN_PAGE_SIZE;
+
+	return top_addr;
 }
 
 #endif
Signature · 1 line
2.45.1
#13 lore raw

PATCH 5/5 um: Add 4 level page table support

In reply to [email protected]

From: Benjamin Berg <[email protected]>

The larger memory space is useful to support more applications inside UML. One example for this is ASAN instrumentation of userspace applications which requires addresses that would otherwise not be available.

---
 arch/um/Kconfig                      |   1 +
 arch/um/include/asm/page.h           |  14 +++-
 arch/um/include/asm/pgalloc.h        |  11 ++-
 arch/um/include/asm/pgtable-4level.h | 119 +++++++++++++++++++++++++++
 arch/um/include/asm/pgtable.h        |   6 +-
 arch/um/kernel/mem.c                 |  17 +++-
 arch/x86/um/Kconfig                  |  38 ++++++---
 7 files changed, 189 insertions(+), 17 deletions(-)
 create mode 100644 arch/um/include/asm/pgtable-4level.h
arch/um/Kconfig +1 -0
index 93a5a8999b07..5d111fc8ccb7 100644
@@ -208,6 +208,7 @@ config MMAPPER
 
 config PGTABLE_LEVELS
 	int
+	default 4 if 4_LEVEL_PGTABLES
 	default 3 if 3_LEVEL_PGTABLES
 	default 2
 
arch/um/include/asm/page.h +11 -3
index 9ef9a8aedfa6..c3b2ae03b60c 100644
@@ -57,14 +57,22 @@ typedef unsigned long long phys_t;
 typedef struct { unsigned long pte; } pte_t;
 typedef struct { unsigned long pgd; } pgd_t;
 
-#ifdef CONFIG_3_LEVEL_PGTABLES
+#if CONFIG_PGTABLE_LEVELS > 2
+
 typedef struct { unsigned long pmd; } pmd_t;
 #define pmd_val(x)	((x).pmd)
 #define __pmd(x) ((pmd_t) { (x) } )
-#endif
 
-#define pte_val(x)	((x).pte)
+#if CONFIG_PGTABLE_LEVELS > 3
 
+typedef struct { unsigned long pud; } pud_t;
+#define pud_val(x)	((x).pud)
+#define __pud(x) ((pud_t) { (x) } )
+
+#endif /* CONFIG_PGTABLE_LEVELS > 3 */
+#endif /* CONFIG_PGTABLE_LEVELS > 2 */
+
+#define pte_val(x)	((x).pte)
 
 #define pte_get_bits(p, bits) ((p).pte & (bits))
 #define pte_set_bits(p, bits) ((p).pte |= (bits))
arch/um/include/asm/pgalloc.h +10 -1
index de5e31c64793..04fb4e6969a4 100644
@@ -31,7 +31,7 @@ do {								\
 	tlb_remove_page_ptdesc((tlb), (page_ptdesc(pte)));	\
 } while (0)
 
-#ifdef CONFIG_3_LEVEL_PGTABLES
+#if CONFIG_PGTABLE_LEVELS > 2
 
 #define __pmd_free_tlb(tlb, pmd, address)			\
 do {								\
@@ -39,6 +39,15 @@ do {								\
 	tlb_remove_page_ptdesc((tlb), virt_to_ptdesc(pmd));	\
 } while (0)
 
+#if CONFIG_PGTABLE_LEVELS > 3
+
+#define __pud_free_tlb(tlb, pud, address)			\
+do {								\
+	pagetable_pud_dtor(virt_to_ptdesc(pud));		\
+	tlb_remove_page_ptdesc((tlb), virt_to_ptdesc(pud));	\
+} while (0)
+
+#endif
 #endif
 
 #endif
arch/um/include/asm/pgtable-4level.h new file +119 -0

119 lines not on this page · raw message

arch/um/include/asm/pgtable.h +4 -2
index e1ece21dbe3f..71a7651e2db7 100644
@@ -24,9 +24,11 @@
 /* We borrow bit 10 to store the exclusive marker in swap PTEs. */
 #define _PAGE_SWP_EXCLUSIVE	0x400
 
-#ifdef CONFIG_3_LEVEL_PGTABLES
+#if CONFIG_PGTABLE_LEVELS == 4
+#include <asm/pgtable-4level.h>
+#elif CONFIG_PGTABLE_LEVELS == 3
 #include <asm/pgtable-3level.h>
-#else
+#elif CONFIG_PGTABLE_LEVELS == 2
 #include <asm/pgtable-2level.h>
 #endif
 
arch/um/kernel/mem.c +16 -1
index ca91accd64fc..2dc0d90c0550 100644
@@ -99,7 +99,7 @@ static void __init one_page_table_init(pmd_t *pmd)
 
 static void __init one_md_table_init(pud_t *pud)
 {
-#ifdef CONFIG_3_LEVEL_PGTABLES
+#if CONFIG_PGTABLE_LEVELS > 2
 	pmd_t *pmd_table = (pmd_t *) memblock_alloc_low(PAGE_SIZE, PAGE_SIZE);
 	if (!pmd_table)
 		panic("%s: Failed to allocate %lu bytes align=%lx\n",
@@ -110,6 +110,19 @@ static void __init one_md_table_init(pud_t *pud)
 #endif
 }
 
+static void __init one_ud_table_init(p4d_t *p4d)
+{
+#if CONFIG_PGTABLE_LEVELS > 3
+	pud_t *pud_table = (pud_t *) memblock_alloc_low(PAGE_SIZE, PAGE_SIZE);
+	if (!pud_table)
+		panic("%s: Failed to allocate %lu bytes align=%lx\n",
+		      __func__, PAGE_SIZE, PAGE_SIZE);
+
+	set_p4d(p4d, __p4d(_KERNPG_TABLE + (unsigned long) __pa(pud_table)));
+	BUG_ON(pud_table != pud_offset(p4d, 0));
+#endif
+}
+
 static void __init fixrange_init(unsigned long start, unsigned long end,
 				 pgd_t *pgd_base)
 {
@@ -127,6 +140,8 @@ static void __init fixrange_init(unsigned long start, unsigned long end,
 
 	for ( ; (i < PTRS_PER_PGD) && (vaddr < end); pgd++, i++) {
 		p4d = p4d_offset(pgd, vaddr);
+		if (p4d_none(*p4d))
+			one_ud_table_init(p4d);
 		pud = pud_offset(p4d, vaddr);
 		if (pud_none(*pud))
 			one_md_table_init(pud);
arch/x86/um/Kconfig +28 -10
index 186f13268401..72dc7b0b3a33 100644
@@ -28,16 +28,34 @@ config X86_64
 	def_bool 64BIT
 	select MODULES_USE_ELF_RELA
 
-config 3_LEVEL_PGTABLES
-	bool "Three-level pagetables" if !64BIT
-	default 64BIT
-	help
-	  Three-level pagetables will let UML have more than 4G of physical
-	  memory.  All the memory that can't be mapped directly will be treated
-	  as high memory.
-
-	  However, this it experimental on 32-bit architectures, so if unsure say
-	  N (on x86-64 it's automatically enabled, instead, as it's safe there).
+choice
+	prompt "Pagetable levels" if EXPERT
+	default 2_LEVEL_PGTABLES if !64BIT
+	default 4_LEVEL_PGTABLES if 64BIT
+
+	config 2_LEVEL_PGTABLES
+		bool "Three-level pagetables" if !64BIT
+		depends on !64BIT
+		help
+		  Two-level page table for 32-bit architectures.
+
+	config 3_LEVEL_PGTABLES
+		bool "Three-level pagetables" if 64BIT
+		help
+		  Three-level pagetables will let UML have more than 4G of physical
+		  memory.  All the memory that can't be mapped directly will be treated
+		  as high memory.
+
+		  However, this it experimental on 32-bit architectures, so if unsure say
+		  N (on x86-64 it's automatically enabled, instead, as it's safe there).
+
+	config 4_LEVEL_PGTABLES
+		bool "Four-level pagetables" if 64BIT
+		depends on 64BIT
+		help
+		  Four-level pagetables, gives a bigger address space which can be
+		  useful for some applications (e.g. ASAN).
+endchoice
 
 config ARCH_HAS_SC_SIGNALS
 	def_bool !64BIT
Signature · 1 line
2.45.1
#14 lore raw

Re: [PATCH 5/5] um: Add 4 level page table support

On 5/28/24 4:54 PM, [email protected] wrote:
[...]

Quoted 12 lines
arch/um/Kconfig +1 -0
index 93a5a8999b07..5d111fc8ccb7 100644
@@ -208,6 +208,7 @@ config MMAPPER
 
 config PGTABLE_LEVELS
 	int
+	default 4 if 4_LEVEL_PGTABLES
 	default 3 if 3_LEVEL_PGTABLES
 	default 2
 

[...]

Quoted 15 lines
arch/x86/um/Kconfig +0 -7
index 186f13268401..72dc7b0b3a33 100644
@@ -28,16 +28,34 @@ config X86_64
 	def_bool 64BIT
 	select MODULES_USE_ELF_RELA
 
-config 3_LEVEL_PGTABLES
-	bool "Three-level pagetables" if !64BIT
-	default 64BIT
-	help
-	  Three-level pagetables will let UML have more than 4G of physical
-	  memory.  All the memory that can't be mapped directly will be treated
-	  as high memory.

arch/x86/um/Kconfig config X86_64 · line 37

Quoted 10 lines
arch/x86/um/Kconfig +7 -3
-
-	  However, this it experimental on 32-bit architectures, so if unsure say
-	  N (on x86-64 it's automatically enabled, instead, as it's safe there).
+choice
+	prompt "Pagetable levels" if EXPERT
+	default 2_LEVEL_PGTABLES if !64BIT
+	default 4_LEVEL_PGTABLES if 64BIT
+
+	config 2_LEVEL_PGTABLES
+		bool "Three-level pagetables" if !64BIT

Nit: s/Three-level/Two-level/

Quoted 10 lines
arch/x86/um/Kconfig +10 -0
+		depends on !64BIT
+		help
+		  Two-level page table for 32-bit architectures.
+
+	config 3_LEVEL_PGTABLES
+		bool "Three-level pagetables" if 64BIT
+		help
+		  Three-level pagetables will let UML have more than 4G of physical
+		  memory.  All the memory that can't be mapped directly will be treated
+		  as high memory.

arch/x86/um/Kconfig config X86_64 · line 57

Quoted 10 lines
arch/x86/um/Kconfig +10 -0
+
+		  However, this it experimental on 32-bit architectures, so if unsure say
+		  N (on x86-64 it's automatically enabled, instead, as it's safe there).
+
+	config 4_LEVEL_PGTABLES
+		bool "Four-level pagetables" if 64BIT
+		depends on 64BIT
+		help
+		  Four-level pagetables, gives a bigger address space which can be
+		  useful for some applications (e.g. ASAN).

On 64bit, it appears that 4_LEVEL_PGTABLES won't be selected by running "make ARCH=um defconfig", and PGTABLE_LEVELS will be 2.

I got the following search result in "make ARCH=um menuconfig":

  │ Symbol: 4_LEVEL_PGTABLES [=n]
  │ Type  : bool
  │ Defined at arch/x86/um/Kconfig:51
  │   Prompt: Four-level pagetables
  │   Depends on: <choice> && 64BIT [=y]
  │   Location:
  │ (1) -> UML-specific options
  │       -> Pagetable levels (<choice> [=n])
  │         -> Four-level pagetables (4_LEVEL_PGTABLES [=n])

And 4_LEVEL_PGTABLES will be selected if I turn on EXPERT manually.

Regards,
Tiwei

Quoted 4 lines
arch/x86/um/Kconfig +1 -0
+endchoice
 
 config ARCH_HAS_SC_SIGNALS
 	def_bool !64BIT