mmc: sdhci-of-dwcmshc: set CQE irq-handler for rockchip variants
PATCH 1/1 mmc: sdhci-of-dwcmshc: set CQE irq-handler for rockchip variants
From: Heiko Stuebner <[email protected]>
The dwcmshc used on Rockchip rk3568 and rk3588 can use cqe, so set the needed irq handler.
Tested on a rk3588-tiger SoM with dd, hdparm and fio. fio performance does increase slightly from
Run status group 0 (all jobs):
READ: bw=209MiB/s (219MB/s), 209MiB/s-209MiB/s (219MB/s-219MB/s), io=4096MiB (4295MB), run=19607-19607msec
without CQE to
Run status group 0 (all jobs):
READ: bw=215MiB/s (225MB/s), 215MiB/s-215MiB/s (225MB/s-225MB/s), io=4096MiB (4295MB), run=19062-19062msec
with CQE enabled.
--- drivers/mmc/host/sdhci-of-dwcmshc.c | 1 + 1 file changed, 1 insertion(+)
drivers/mmc/host/sdhci-of-dwcmshc.c +1 -0
@@ -908,6 +908,7 @@ static const struct sdhci_ops sdhci_dwcmshc_rk35xx_ops = { .get_max_clock = rk35xx_get_max_clock, .reset = rk35xx_sdhci_reset, .adma_write_desc = dwcmshc_adma_write_desc, + .irq = dwcmshc_cqe_irq_handler, };static const struct sdhci_ops sdhci_dwcmshc_th1520_ops = {
Signature · 1 line
2.39.2
Quoted 11 lines · Heiko Stuebner
From: Heiko Stuebner <[email protected]>
The dwcmshc used on Rockchip rk3568 and rk3588 can use cqe, so set the needed irq handler.
Tested on a rk3588-tiger SoM with dd, hdparm and fio. fio performance does increase slightly from
Run status group 0 (all jobs):
READ: bw=209MiB/s (219MB/s), 209MiB/s-209MiB/s (219MB/s-219MB/s), io=4096MiB (4295MB), run=19607-19607msec
Quoted 8 lines
without CQE to
Run status group 0 (all jobs):
READ: bw=215MiB/s (225MB/s), 215MiB/s-215MiB/s (225MB/s-225MB/s), io=4096MiB (4295MB), run=19062-19062msecwith CQE enabled.
Signed-off-by Heiko Stuebner <[email protected]>
Quoted 16 lines
--- drivers/mmc/host/sdhci-of-dwcmshc.c | 1 + 1 file changed, 1 insertion(+)drivers/mmc/host/sdhci-of-dwcmshc.c +1
-0@@ -908,6 +908,7 @@ static const struct sdhci_ops sdhci_dwcmshc_rk35xx_ops = { .get_max_clock = rk35xx_get_max_clock, .reset = rk35xx_sdhci_reset, .adma_write_desc = dwcmshc_adma_write_desc, + .irq = dwcmshc_cqe_irq_handler, };static const struct sdhci_ops sdhci_dwcmshc_th1520_ops = {
Quoted 12 lines · Heiko Stuebner
From: Heiko Stuebner <[email protected]>
The dwcmshc used on Rockchip rk3568 and rk3588 can use cqe, so set the needed irq handler.
Tested on a rk3588-tiger SoM with dd, hdparm and fio. fio performance does increase slightly from
Run status group 0 (all jobs):
READ: bw=209MiB/s (219MB/s), 209MiB/s-209MiB/s (219MB/s-219MB/s), io=4096MiB (4295MB), run=19607-19607msec
Quoted 8 lines
without CQE to
Run status group 0 (all jobs):
READ: bw=215MiB/s (225MB/s), 215MiB/s-215MiB/s (225MB/s-225MB/s), io=4096MiB (4295MB), run=19062-19062msecwith CQE enabled.
Signed-off-by Heiko Stuebner <[email protected]>
Applied for next, thanks!
Kind regards
Uffe
Quoted 19 lines
--- drivers/mmc/host/sdhci-of-dwcmshc.c | 1 + 1 file changed, 1 insertion(+)drivers/mmc/host/sdhci-of-dwcmshc.c +1
-1@@ -908,6 +908,7 @@ static const struct sdhci_ops sdhci_dwcmshc_rk35xx_ops = { .get_max_clock = rk35xx_get_max_clock, .reset = rk35xx_sdhci_reset, .adma_write_desc = dwcmshc_adma_write_desc, + .irq = dwcmshc_cqe_irq_handler, };static const struct sdhci_ops sdhci_dwcmshc_th1520_ops = { --2.39.2