Skip to contentSkip to conversation

Add AST2700 support

PATCH Applied Jamin Lin via 5 participants 32 messages Jun 4, 2024 – Feb 4, 2025

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

v5 cover Add AST2700 support

Changes from v1:
The patch series supports WDT, SDMC, SMC, SCU, SLI and INTC for AST2700 SoC.

Changes from v2:
- replace is_aarch64 with is_bus64bit for sdmc patch review.
- fix incorrect dram size for AST2700

Changes from v3:
- Add AST2700 Evaluation board in ASPEED document
- Add avocado test cases for AST2700 Evaluation board
- Fix reviewers review issues and add reviewers suggestions
- Implement INTC model GICINT 128 to GICINT136 for AST2700

Changes from v4:
- support 64 bits dma dram address associated with review issues
- support dma start length and 1 byte length unit associated with review issues
- refactor intc model to fix serial console stuck issue and associated with review issues

Changes from v5:
- sdmc: incrementing the version of vmstate to 2.
- smc: support different memory region ops for SMC flash region introduce a new "const MemoryRegionOps *" attribute in AspeedSMCClass and use it in aspeed_smc_flash_realize function.
- intc: fix associated with review issues
- dram size detect: change to use address space API and simplify with write transaction on the DRAM memory region of the SoC.
- ast27x0_soc: update aspeed_soc_ast2700_gic function associated with review issues and rename to aspeed_soc_ast2700_gic_realize

Test Version:
qemu commit:
https://github.com/qemu/qemu/commit/74abb45dac6979e7ff76172b7f0a24e869405184
applied patch:
https://patchew.org/QEMU/[email protected]/

Test steps:
1. Download the latest openbmc image for AST2700 from AspeedTech-BMC/openbmc repository, https://github.com/AspeedTech-BMC/openbmc/releases/tag/v09.01

2. untar ast2700-default-obmc.tar.gz

   ```
   tar -xf ast2700-default-obmc.tar.gz
   ```

3. Run and the contents of scripts as following IMGDIR=ast2700-default
UBOOT_SIZE=$(stat --format=%s -L ${IMGDIR}/u-boot-nodtb.bin) UBOOT_DTB_ADDR=$((0x400000000 + ${UBOOT_SIZE}))

qemu-system-aarch64 -M ast2700-evb -nographic\
-device loader,addr=0x400000000,file=${IMGDIR}/u-boot-nodtb.bin,force-raw=on\
-device loader,addr=${UBOOT_DTB_ADDR},file=${IMGDIR}/u-boot.dtb,force-raw=on\
-device loader,addr=0x430000000,file=${IMGDIR}/bl31.bin,force-raw=on\
-device loader,addr=0x430080000,file=${IMGDIR}/optee/tee-raw.bin,force-raw=on\
-device loader,addr=0x430000000,cpu-num=0\
-device loader,addr=0x430000000,cpu-num=1\
-device loader,addr=0x430000000,cpu-num=2\
-device loader,addr=0x430000000,cpu-num=3\
-smp 4\
-drive file=${IMGDIR}/image-bmc,format=raw,if=mtd\
-serial mon:stdio\
-snapshot

Jamin Lin (17):
aspeed/wdt: Add AST2700 support
aspeed/sli: Add AST2700 support
aspeed/sdmc: remove redundant macros
aspeed/sdmc: fix coding style
aspeed/sdmc: Add AST2700 support
aspeed/smc: correct device description
aspeed/smc: support dma start length and 1 byte length unit aspeed/smc: support 64 bits dma dram address
aspeed/smc: support different memory region ops for SMC flash region aspeed/smc: Add AST2700 support
aspeed/scu: Add AST2700 support
aspeed/intc: Add AST2700 support
aspeed/soc: Add AST2700 support
aspeed: Add an AST2700 eval board
aspeed/soc: fix incorrect dram size for AST2700 test/avocado/machine_aspeed.py: Add AST2700 test case docs:aspeed: Add AST2700 Evaluation board

 docs/system/arm/aspeed.rst       |  39 +-
 hw/arm/aspeed.c                  |  32 ++
 hw/arm/aspeed_ast27x0.c          | 648 +++++++++++++++++++++++++++++++
 hw/arm/meson.build               |   1 +
 hw/intc/aspeed_intc.c            | 360 +++++++++++++++++
 hw/intc/meson.build              |   1 +
 hw/intc/trace-events             |  13 +
 hw/misc/aspeed_scu.c             | 306 ++++++++++++++-
 hw/misc/aspeed_sdmc.c            | 220 +++++++++--
 hw/misc/aspeed_sli.c             | 177 +++++++++
 hw/misc/meson.build              |   3 +-
 hw/misc/trace-events             |  11 +
 hw/ssi/aspeed_smc.c              | 346 ++++++++++++++++-
 hw/ssi/trace-events              |   2 +-
 hw/watchdog/wdt_aspeed.c         |  24 ++
 include/hw/arm/aspeed_soc.h      |  30 +-
 include/hw/intc/aspeed_intc.h    |  44 +++
 include/hw/misc/aspeed_scu.h     |  47 ++-
 include/hw/misc/aspeed_sdmc.h    |   5 +-
 include/hw/misc/aspeed_sli.h     |  27 ++
 include/hw/ssi/aspeed_smc.h      |   2 +
 include/hw/watchdog/wdt_aspeed.h |   3 +-
 tests/avocado/machine_aspeed.py  |  62 +++
 23 files changed, 2345 insertions(+), 58 deletions(-)
 create mode 100644 hw/arm/aspeed_ast27x0.c
 create mode 100644 hw/intc/aspeed_intc.c
 create mode 100644 hw/misc/aspeed_sli.c
 create mode 100644 include/hw/intc/aspeed_intc.h
 create mode 100644 include/hw/misc/aspeed_sli.h
Signature · 1 line
2.25.1
#1 lore raw

PATCH v5 3/17 aspeed/sdmc: remove redundant macros

These macros are no longer used for ASPEED SOCs, so removes them.

---
 hw/misc/aspeed_sdmc.c | 15 ---------------
 1 file changed, 15 deletions(-)
hw/misc/aspeed_sdmc.c +0 -15
index 64cd1a81dc..74279bbe8e 100644
@@ -76,10 +76,6 @@
 #define     ASPEED_SDMC_VGA_32MB            0x2
 #define     ASPEED_SDMC_VGA_64MB            0x3
 #define ASPEED_SDMC_DRAM_SIZE(x)        (x & 0x3)
-#define     ASPEED_SDMC_DRAM_64MB           0x0
-#define     ASPEED_SDMC_DRAM_128MB          0x1
-#define     ASPEED_SDMC_DRAM_256MB          0x2
-#define     ASPEED_SDMC_DRAM_512MB          0x3
 
 #define ASPEED_SDMC_READONLY_MASK                       \
     (ASPEED_SDMC_RESERVED | ASPEED_SDMC_VGA_COMPAT |    \
@@ -100,17 +96,6 @@
 #define ASPEED_SDMC_CACHE_ENABLE        (1 << 10) /* differs from AST2400 */
 #define ASPEED_SDMC_DRAM_TYPE           (1 << 4)  /* differs from AST2400 */
 
-/* DRAM size definitions differs */
-#define     ASPEED_SDMC_AST2500_128MB       0x0
-#define     ASPEED_SDMC_AST2500_256MB       0x1
-#define     ASPEED_SDMC_AST2500_512MB       0x2
-#define     ASPEED_SDMC_AST2500_1024MB      0x3
-
-#define     ASPEED_SDMC_AST2600_256MB       0x0
-#define     ASPEED_SDMC_AST2600_512MB       0x1
-#define     ASPEED_SDMC_AST2600_1024MB      0x2
-#define     ASPEED_SDMC_AST2600_2048MB      0x3
-
 #define ASPEED_SDMC_AST2500_READONLY_MASK                               \
     (ASPEED_SDMC_HW_VERSION(0xf) | ASPEED_SDMC_CACHE_INITIAL_DONE |     \
      ASPEED_SDMC_AST2500_RESERVED | ASPEED_SDMC_VGA_COMPAT |            \
Signature · 1 line
2.25.1
#2 lore raw

PATCH v5 1/17 aspeed/wdt: Add AST2700 support

In reply to Jamin Lin via

AST2700 wdt controller is similiar to AST2600's wdt, but
the AST2700 has 8 watchdogs, and they each have 0x80 of registers. Introduce ast2700 object class and increase the number of regs(offset) of ast2700 model.

---
 hw/watchdog/wdt_aspeed.c         | 24 ++++++++++++++++++++++++
 include/hw/watchdog/wdt_aspeed.h |  3 ++-
 2 files changed, 26 insertions(+), 1 deletion(-)
hw/watchdog/wdt_aspeed.c +24 -0
index d70b656f8e..75685c5647 100644
@@ -422,12 +422,36 @@ static const TypeInfo aspeed_1030_wdt_info = {
     .class_init = aspeed_1030_wdt_class_init,
 };
 
+static void aspeed_2700_wdt_class_init(ObjectClass *klass, void *data)
+{
+    DeviceClass *dc = DEVICE_CLASS(klass);
+    AspeedWDTClass *awc = ASPEED_WDT_CLASS(klass);
+
+    dc->desc = "ASPEED 2700 Watchdog Controller";
+    awc->iosize = 0x80;
+    awc->ext_pulse_width_mask = 0xfffff; /* TODO */
+    awc->reset_ctrl_reg = AST2600_SCU_RESET_CONTROL1;
+    awc->reset_pulse = aspeed_2500_wdt_reset_pulse;
+    awc->wdt_reload = aspeed_wdt_reload_1mhz;
+    awc->sanitize_ctrl = aspeed_2600_sanitize_ctrl;
+    awc->default_status = 0x014FB180;
+    awc->default_reload_value = 0x014FB180;
+}
+
+static const TypeInfo aspeed_2700_wdt_info = {
+    .name = TYPE_ASPEED_2700_WDT,
+    .parent = TYPE_ASPEED_WDT,
+    .instance_size = sizeof(AspeedWDTState),
+    .class_init = aspeed_2700_wdt_class_init,
+};
+
 static void wdt_aspeed_register_types(void)
 {
     type_register_static(&aspeed_wdt_info);
     type_register_static(&aspeed_2400_wdt_info);
     type_register_static(&aspeed_2500_wdt_info);
     type_register_static(&aspeed_2600_wdt_info);
+    type_register_static(&aspeed_2700_wdt_info);
     type_register_static(&aspeed_1030_wdt_info);
 }
 
include/hw/watchdog/wdt_aspeed.h +2 -1
index e90ef86651..830b0a7936 100644
@@ -19,9 +19,10 @@ OBJECT_DECLARE_TYPE(AspeedWDTState, AspeedWDTClass, ASPEED_WDT)
 #define TYPE_ASPEED_2400_WDT TYPE_ASPEED_WDT "-ast2400"
 #define TYPE_ASPEED_2500_WDT TYPE_ASPEED_WDT "-ast2500"
 #define TYPE_ASPEED_2600_WDT TYPE_ASPEED_WDT "-ast2600"
+#define TYPE_ASPEED_2700_WDT TYPE_ASPEED_WDT "-ast2700"
 #define TYPE_ASPEED_1030_WDT TYPE_ASPEED_WDT "-ast1030"
 
-#define ASPEED_WDT_REGS_MAX        (0x30 / 4)
+#define ASPEED_WDT_REGS_MAX        (0x80 / 4)
 
 struct AspeedWDTState {
     /*< private >*/
Signature · 1 line
2.25.1
#3 lore raw

PATCH v5 5/17 aspeed/sdmc: Add AST2700 support

In reply to Jamin Lin via

The SDRAM memory controller(DRAMC) controls the access to external DDR4 and DDR5 SDRAM and power up to DDR4 and DDR5 PHY.

The DRAM memory controller of AST2700 is not backward compatible to previous chips such AST2600, AST2500 and AST2400.

Max memory is now 8GiB on the AST2700. Introduce new aspeed_2700_sdmc and class with read/write operation and reset handlers.

Define DRAMC necessary protected registers and
unprotected registers for AST2700 and increase
the register set to 0x1000.

Add unlocked property to change controller protected status.

Incrementing the version of vmstate to 2.

---
 hw/misc/aspeed_sdmc.c         | 194 +++++++++++++++++++++++++++++++++-
 include/hw/misc/aspeed_sdmc.h |   5 +-
 2 files changed, 195 insertions(+), 4 deletions(-)
hw/misc/aspeed_sdmc.c +191 -3
index 873d67c592..93e2e29ead 100644
@@ -27,6 +27,7 @@
 #define   PROT_SOFTLOCKED    0x00
 
 #define   PROT_KEY_UNLOCK     0xFC600309
+#define   PROT_2700_KEY_UNLOCK  0x1688A8A8
 #define   PROT_KEY_HARDLOCK   0xDEADDEAD /* AST2600 */
 
 /* Configuration Register */
@@ -54,6 +55,46 @@
 #define R_DRAM_TIME       (0x8c / 4)
 #define R_ECC_ERR_INJECT  (0xb4 / 4)
 
+/* AST2700 Register */
+#define R_2700_PROT                 (0x00 / 4)
+#define R_INT_STATUS                (0x04 / 4)
+#define R_INT_CLEAR                 (0x08 / 4)
+#define R_INT_MASK                  (0x0c / 4)
+#define R_MAIN_CONF                 (0x10 / 4)
+#define R_MAIN_CONTROL              (0x14 / 4)
+#define R_MAIN_STATUS               (0x18 / 4)
+#define R_ERR_STATUS                (0x1c / 4)
+#define R_ECC_FAIL_STATUS           (0x78 / 4)
+#define R_ECC_FAIL_ADDR             (0x7c / 4)
+#define R_ECC_TESTING_CONTROL       (0x80 / 4)
+#define R_PROT_REGION_LOCK_STATUS   (0x94 / 4)
+#define R_TEST_FAIL_ADDR            (0xd4 / 4)
+#define R_TEST_FAIL_D0              (0xd8 / 4)
+#define R_TEST_FAIL_D1              (0xdc / 4)
+#define R_TEST_FAIL_D2              (0xe0 / 4)
+#define R_TEST_FAIL_D3              (0xe4 / 4)
+#define R_DBG_STATUS                (0xf4 / 4)
+#define R_PHY_INTERFACE_STATUS      (0xf8 / 4)
+#define R_GRAPHIC_MEM_BASE_ADDR     (0x10c / 4)
+#define R_PORT0_INTERFACE_MONITOR0  (0x240 / 4)
+#define R_PORT0_INTERFACE_MONITOR1  (0x244 / 4)
+#define R_PORT0_INTERFACE_MONITOR2  (0x248 / 4)
+#define R_PORT1_INTERFACE_MONITOR0  (0x2c0 / 4)
+#define R_PORT1_INTERFACE_MONITOR1  (0x2c4 / 4)
+#define R_PORT1_INTERFACE_MONITOR2  (0x2c8 / 4)
+#define R_PORT2_INTERFACE_MONITOR0  (0x340 / 4)
+#define R_PORT2_INTERFACE_MONITOR1  (0x344 / 4)
+#define R_PORT2_INTERFACE_MONITOR2  (0x348 / 4)
+#define R_PORT3_INTERFACE_MONITOR0  (0x3c0 / 4)
+#define R_PORT3_INTERFACE_MONITOR1  (0x3c4 / 4)
+#define R_PORT3_INTERFACE_MONITOR2  (0x3c8 / 4)
+#define R_PORT4_INTERFACE_MONITOR0  (0x440 / 4)
+#define R_PORT4_INTERFACE_MONITOR1  (0x444 / 4)
+#define R_PORT4_INTERFACE_MONITOR2  (0x448 / 4)
+#define R_PORT5_INTERFACE_MONITOR0  (0x4c0 / 4)
+#define R_PORT5_INTERFACE_MONITOR1  (0x4c4 / 4)
+#define R_PORT5_INTERFACE_MONITOR2  (0x4c8 / 4)
+
 /*
  * Configuration register Ox4 (for Aspeed AST2400 SOC)
  *
@@ -101,6 +142,19 @@
      ASPEED_SDMC_AST2500_RESERVED | ASPEED_SDMC_VGA_COMPAT |            \
      ASPEED_SDMC_VGA_APERTURE(ASPEED_SDMC_VGA_64MB))
 
+/*
+ * Main Configuration register Ox10 (for Aspeed AST2700 SOC and higher)
+ *
+ */
+#define ASPEED_SDMC_AST2700_RESERVED        0xFFFF2082 /* 31:16, 13, 7, 1 */
+#define ASPEED_SDMC_AST2700_DATA_SCRAMBLE           (1 << 8)
+#define ASPEED_SDMC_AST2700_ECC_ENABLE              (1 << 6)
+#define ASPEED_SDMC_AST2700_PAGE_MATCHING_ENABLE    (1 << 5)
+#define ASPEED_SDMC_AST2700_DRAM_SIZE(x)            ((x & 0x7) << 2)
+
+#define ASPEED_SDMC_AST2700_READONLY_MASK   \
+     (ASPEED_SDMC_AST2700_RESERVED)
+
 static uint64_t aspeed_sdmc_read(void *opaque, hwaddr addr, unsigned size)
 {
     AspeedSDMCState *s = ASPEED_SDMC(opaque);
@@ -216,7 +270,7 @@ static void aspeed_sdmc_realize(DeviceState *dev, Error **errp)
     AspeedSDMCState *s = ASPEED_SDMC(dev);
     AspeedSDMCClass *asc = ASPEED_SDMC_GET_CLASS(s);
 
-    assert(asc->max_ram_size < 4 * GiB); /* 32-bit address bus */
+    assert(asc->max_ram_size < 4 * GiB || asc->is_bus64bit);
     s->max_ram_size = asc->max_ram_size;
 
     memory_region_init_io(&s->iomem, OBJECT(s), &aspeed_sdmc_ops, s,
@@ -226,8 +280,8 @@ static void aspeed_sdmc_realize(DeviceState *dev, Error **errp)
 
 static const VMStateDescription vmstate_aspeed_sdmc = {
     .name = "aspeed.sdmc",
-    .version_id = 1,
-    .minimum_version_id = 1,
+    .version_id = 2,
+    .minimum_version_id = 2,
     .fields = (const VMStateField[]) {
         VMSTATE_UINT32_ARRAY(regs, AspeedSDMCState, ASPEED_SDMC_NR_REGS),
         VMSTATE_END_OF_LIST()
@@ -236,6 +290,7 @@ static const VMStateDescription vmstate_aspeed_sdmc = {
 
 static Property aspeed_sdmc_properties[] = {
     DEFINE_PROP_UINT64("max-ram-size", AspeedSDMCState, max_ram_size, 0),
+    DEFINE_PROP_BOOL("unlocked", AspeedSDMCState, unlocked, false),
     DEFINE_PROP_END_OF_LIST(),
 };
 
@@ -500,12 +555,145 @@ static const TypeInfo aspeed_2600_sdmc_info = {
     .class_init = aspeed_2600_sdmc_class_init,
 };
 
+static void aspeed_2700_sdmc_reset(DeviceState *dev)
+{
+    AspeedSDMCState *s = ASPEED_SDMC(dev);
+    AspeedSDMCClass *asc = ASPEED_SDMC_GET_CLASS(s);
+
+    memset(s->regs, 0, sizeof(s->regs));
+
+    /* Set ram size bit and defaults values */
+    s->regs[R_MAIN_CONF] = asc->compute_conf(s, 0);
+
+    if (s->unlocked) {
+        s->regs[R_2700_PROT] = PROT_UNLOCKED;
+    }
+}
+
+static uint32_t aspeed_2700_sdmc_compute_conf(AspeedSDMCState *s, uint32_t data)
+{
+    uint32_t fixed_conf = ASPEED_SDMC_AST2700_PAGE_MATCHING_ENABLE |
+        ASPEED_SDMC_AST2700_DRAM_SIZE(aspeed_sdmc_get_ram_bits(s));
+
+    /* Make sure readonly bits are kept */
+    data &= ~ASPEED_SDMC_AST2700_READONLY_MASK;
+
+    return data | fixed_conf;
+}
+
+static void aspeed_2700_sdmc_write(AspeedSDMCState *s, uint32_t reg,
+                                   uint32_t data)
+{
+    /* Unprotected registers */
+    switch (reg) {
+    case R_INT_STATUS:
+    case R_INT_CLEAR:
+    case R_INT_MASK:
+    case R_MAIN_STATUS:
+    case R_ERR_STATUS:
+    case R_ECC_FAIL_STATUS:
+    case R_ECC_FAIL_ADDR:
+    case R_PROT_REGION_LOCK_STATUS:
+    case R_TEST_FAIL_ADDR:
+    case R_TEST_FAIL_D0:
+    case R_TEST_FAIL_D1:
+    case R_TEST_FAIL_D2:
+    case R_TEST_FAIL_D3:
+    case R_DBG_STATUS:
+    case R_PHY_INTERFACE_STATUS:
+    case R_GRAPHIC_MEM_BASE_ADDR:
+    case R_PORT0_INTERFACE_MONITOR0:
+    case R_PORT0_INTERFACE_MONITOR1:
+    case R_PORT0_INTERFACE_MONITOR2:
+    case R_PORT1_INTERFACE_MONITOR0:
+    case R_PORT1_INTERFACE_MONITOR1:
+    case R_PORT1_INTERFACE_MONITOR2:
+    case R_PORT2_INTERFACE_MONITOR0:
+    case R_PORT2_INTERFACE_MONITOR1:
+    case R_PORT2_INTERFACE_MONITOR2:
+    case R_PORT3_INTERFACE_MONITOR0:
+    case R_PORT3_INTERFACE_MONITOR1:
+    case R_PORT3_INTERFACE_MONITOR2:
+    case R_PORT4_INTERFACE_MONITOR0:
+    case R_PORT4_INTERFACE_MONITOR1:
+    case R_PORT4_INTERFACE_MONITOR2:
+    case R_PORT5_INTERFACE_MONITOR0:
+    case R_PORT5_INTERFACE_MONITOR1:
+    case R_PORT5_INTERFACE_MONITOR2:
+        s->regs[reg] = data;
+        return;
+    }
+
+    if (s->regs[R_2700_PROT] == PROT_HARDLOCKED) {
+        qemu_log_mask(LOG_GUEST_ERROR,
+                      "%s: SDMC is locked until system reset!\n",
+                      __func__);
+        return;
+    }
+
+    if (reg != R_2700_PROT && s->regs[R_2700_PROT] == PROT_SOFTLOCKED) {
+        qemu_log_mask(LOG_GUEST_ERROR,
+                      "%s: SDMC is locked! (write to MCR%02x blocked)\n",
+                      __func__, reg * 4);
+        return;
+    }
+
+    switch (reg) {
+    case R_2700_PROT:
+        if (data == PROT_2700_KEY_UNLOCK)  {
+            data = PROT_UNLOCKED;
+        } else if (data == PROT_KEY_HARDLOCK) {
+            data = PROT_HARDLOCKED;
+        } else {
+            data = PROT_SOFTLOCKED;
+        }
+        break;
+    case R_MAIN_CONF:
+        data = aspeed_2700_sdmc_compute_conf(s, data);
+        break;
+    case R_MAIN_STATUS:
+        /* Will never return 'busy'. */
+        data &= ~PHY_BUSY_STATE;
+        break;
+    default:
+        break;
+    }
+
+    s->regs[reg] = data;
+}
+
+static const uint64_t
+    aspeed_2700_ram_sizes[] = { 256 * MiB, 512 * MiB, 1024 * MiB,
+                                2048 * MiB, 4096 * MiB, 8192 * MiB, 0};
+
+static void aspeed_2700_sdmc_class_init(ObjectClass *klass, void *data)
+{
+    DeviceClass *dc = DEVICE_CLASS(klass);
+    AspeedSDMCClass *asc = ASPEED_SDMC_CLASS(klass);
+
+    dc->desc = "ASPEED 2700 SDRAM Memory Controller";
+    dc->reset = aspeed_2700_sdmc_reset;
+
+    asc->is_bus64bit = true;
+    asc->max_ram_size = 8 * GiB;
+    asc->compute_conf = aspeed_2700_sdmc_compute_conf;
+    asc->write = aspeed_2700_sdmc_write;
+    asc->valid_ram_sizes = aspeed_2700_ram_sizes;
+}
+
+static const TypeInfo aspeed_2700_sdmc_info = {
+    .name = TYPE_ASPEED_2700_SDMC,
+    .parent = TYPE_ASPEED_SDMC,
+    .class_init = aspeed_2700_sdmc_class_init,
+};
+
 static void aspeed_sdmc_register_types(void)
 {
     type_register_static(&aspeed_sdmc_info);
     type_register_static(&aspeed_2400_sdmc_info);
     type_register_static(&aspeed_2500_sdmc_info);
     type_register_static(&aspeed_2600_sdmc_info);
+    type_register_static(&aspeed_2700_sdmc_info);
 }
 
 type_init(aspeed_sdmc_register_types);
include/hw/misc/aspeed_sdmc.h +4 -1
index ec2d59a14f..61c979583a 100644
@@ -17,6 +17,7 @@ OBJECT_DECLARE_TYPE(AspeedSDMCState, AspeedSDMCClass, ASPEED_SDMC)
 #define TYPE_ASPEED_2400_SDMC TYPE_ASPEED_SDMC "-ast2400"
 #define TYPE_ASPEED_2500_SDMC TYPE_ASPEED_SDMC "-ast2500"
 #define TYPE_ASPEED_2600_SDMC TYPE_ASPEED_SDMC "-ast2600"
+#define TYPE_ASPEED_2700_SDMC TYPE_ASPEED_SDMC "-ast2700"
 
 /*
  * SDMC has 174 documented registers. In addition the u-boot device tree
@@ -29,7 +30,7 @@ OBJECT_DECLARE_TYPE(AspeedSDMCState, AspeedSDMCClass, ASPEED_SDMC)
  * time, and the other is in the DDR-PHY IP which is used during DDR-PHY
  * training.
  */
-#define ASPEED_SDMC_NR_REGS (0x500 >> 2)
+#define ASPEED_SDMC_NR_REGS (0x1000 >> 2)
 
 struct AspeedSDMCState {
     /*< private >*/
@@ -41,6 +42,7 @@ struct AspeedSDMCState {
     uint32_t regs[ASPEED_SDMC_NR_REGS];
     uint64_t ram_size;
     uint64_t max_ram_size;
+    bool unlocked;
 };
 
 
@@ -51,6 +53,7 @@ struct AspeedSDMCClass {
     const uint64_t *valid_ram_sizes;
     uint32_t (*compute_conf)(AspeedSDMCState *s, uint32_t data);
     void (*write)(AspeedSDMCState *s, uint32_t reg, uint32_t data);
+    bool is_bus64bit;
 };
 
 #endif /* ASPEED_SDMC_H */
Signature · 1 line
2.25.1
Reviewed-by on v5 5/17
#4 lore raw

Re: [PATCH v5 05/17] aspeed/sdmc: Add AST2700 support

Quoted 14 lines · Jamin Lin

The SDRAM memory controller(DRAMC) controls the access to external DDR4 and DDR5 SDRAM and power up to DDR4 and DDR5 PHY.

The DRAM memory controller of AST2700 is not backward compatible to previous chips such AST2600, AST2500 and AST2400.

Max memory is now 8GiB on the AST2700. Introduce new aspeed_2700_sdmc and class with read/write operation and reset handlers.

Define DRAMC necessary protected registers and
unprotected registers for AST2700 and increase
the register set to 0x1000.

Quoted 6 lines

Add unlocked property to change controller protected status.

Incrementing the version of vmstate to 2.

Thanks,

C.

Quoted 295 lines
---
  hw/misc/aspeed_sdmc.c         | 194 +++++++++++++++++++++++++++++++++-
  include/hw/misc/aspeed_sdmc.h |   5 +-
  2 files changed, 195 insertions(+), 4 deletions(-)
hw/misc/aspeed_sdmc.c +191 -3
index 873d67c592..93e2e29ead 100644
@@ -27,6 +27,7 @@
  #define   PROT_SOFTLOCKED    0x00
 
  #define   PROT_KEY_UNLOCK     0xFC600309
+#define   PROT_2700_KEY_UNLOCK  0x1688A8A8
  #define   PROT_KEY_HARDLOCK   0xDEADDEAD /* AST2600 */
 
  /* Configuration Register */
@@ -54,6 +55,46 @@
  #define R_DRAM_TIME       (0x8c / 4)
  #define R_ECC_ERR_INJECT  (0xb4 / 4)
 
+/* AST2700 Register */
+#define R_2700_PROT                 (0x00 / 4)
+#define R_INT_STATUS                (0x04 / 4)
+#define R_INT_CLEAR                 (0x08 / 4)
+#define R_INT_MASK                  (0x0c / 4)
+#define R_MAIN_CONF                 (0x10 / 4)
+#define R_MAIN_CONTROL              (0x14 / 4)
+#define R_MAIN_STATUS               (0x18 / 4)
+#define R_ERR_STATUS                (0x1c / 4)
+#define R_ECC_FAIL_STATUS           (0x78 / 4)
+#define R_ECC_FAIL_ADDR             (0x7c / 4)
+#define R_ECC_TESTING_CONTROL       (0x80 / 4)
+#define R_PROT_REGION_LOCK_STATUS   (0x94 / 4)
+#define R_TEST_FAIL_ADDR            (0xd4 / 4)
+#define R_TEST_FAIL_D0              (0xd8 / 4)
+#define R_TEST_FAIL_D1              (0xdc / 4)
+#define R_TEST_FAIL_D2              (0xe0 / 4)
+#define R_TEST_FAIL_D3              (0xe4 / 4)
+#define R_DBG_STATUS                (0xf4 / 4)
+#define R_PHY_INTERFACE_STATUS      (0xf8 / 4)
+#define R_GRAPHIC_MEM_BASE_ADDR     (0x10c / 4)
+#define R_PORT0_INTERFACE_MONITOR0  (0x240 / 4)
+#define R_PORT0_INTERFACE_MONITOR1  (0x244 / 4)
+#define R_PORT0_INTERFACE_MONITOR2  (0x248 / 4)
+#define R_PORT1_INTERFACE_MONITOR0  (0x2c0 / 4)
+#define R_PORT1_INTERFACE_MONITOR1  (0x2c4 / 4)
+#define R_PORT1_INTERFACE_MONITOR2  (0x2c8 / 4)
+#define R_PORT2_INTERFACE_MONITOR0  (0x340 / 4)
+#define R_PORT2_INTERFACE_MONITOR1  (0x344 / 4)
+#define R_PORT2_INTERFACE_MONITOR2  (0x348 / 4)
+#define R_PORT3_INTERFACE_MONITOR0  (0x3c0 / 4)
+#define R_PORT3_INTERFACE_MONITOR1  (0x3c4 / 4)
+#define R_PORT3_INTERFACE_MONITOR2  (0x3c8 / 4)
+#define R_PORT4_INTERFACE_MONITOR0  (0x440 / 4)
+#define R_PORT4_INTERFACE_MONITOR1  (0x444 / 4)
+#define R_PORT4_INTERFACE_MONITOR2  (0x448 / 4)
+#define R_PORT5_INTERFACE_MONITOR0  (0x4c0 / 4)
+#define R_PORT5_INTERFACE_MONITOR1  (0x4c4 / 4)
+#define R_PORT5_INTERFACE_MONITOR2  (0x4c8 / 4)
+
  /*
   * Configuration register Ox4 (for Aspeed AST2400 SOC)
   *
@@ -101,6 +142,19 @@
       ASPEED_SDMC_AST2500_RESERVED | ASPEED_SDMC_VGA_COMPAT |            \
       ASPEED_SDMC_VGA_APERTURE(ASPEED_SDMC_VGA_64MB))
 
+/*
+ * Main Configuration register Ox10 (for Aspeed AST2700 SOC and higher)
+ *
+ */
+#define ASPEED_SDMC_AST2700_RESERVED        0xFFFF2082 /* 31:16, 13, 7, 1 */
+#define ASPEED_SDMC_AST2700_DATA_SCRAMBLE           (1 << 8)
+#define ASPEED_SDMC_AST2700_ECC_ENABLE              (1 << 6)
+#define ASPEED_SDMC_AST2700_PAGE_MATCHING_ENABLE    (1 << 5)
+#define ASPEED_SDMC_AST2700_DRAM_SIZE(x)            ((x & 0x7) << 2)
+
+#define ASPEED_SDMC_AST2700_READONLY_MASK   \
+     (ASPEED_SDMC_AST2700_RESERVED)
+
  static uint64_t aspeed_sdmc_read(void *opaque, hwaddr addr, unsigned size)
  {
      AspeedSDMCState *s = ASPEED_SDMC(opaque);
@@ -216,7 +270,7 @@ static void aspeed_sdmc_realize(DeviceState *dev, Error **errp)
      AspeedSDMCState *s = ASPEED_SDMC(dev);
      AspeedSDMCClass *asc = ASPEED_SDMC_GET_CLASS(s);
 
-    assert(asc->max_ram_size < 4 * GiB); /* 32-bit address bus */
+    assert(asc->max_ram_size < 4 * GiB || asc->is_bus64bit);
      s->max_ram_size = asc->max_ram_size;
 
      memory_region_init_io(&s->iomem, OBJECT(s), &aspeed_sdmc_ops, s,
@@ -226,8 +280,8 @@ static void aspeed_sdmc_realize(DeviceState *dev, Error **errp)
 
  static const VMStateDescription vmstate_aspeed_sdmc = {
      .name = "aspeed.sdmc",
-    .version_id = 1,
-    .minimum_version_id = 1,
+    .version_id = 2,
+    .minimum_version_id = 2,
      .fields = (const VMStateField[]) {
          VMSTATE_UINT32_ARRAY(regs, AspeedSDMCState, ASPEED_SDMC_NR_REGS),
          VMSTATE_END_OF_LIST()
@@ -236,6 +290,7 @@ static const VMStateDescription vmstate_aspeed_sdmc = {
 
  static Property aspeed_sdmc_properties[] = {
      DEFINE_PROP_UINT64("max-ram-size", AspeedSDMCState, max_ram_size, 0),
+    DEFINE_PROP_BOOL("unlocked", AspeedSDMCState, unlocked, false),
      DEFINE_PROP_END_OF_LIST(),
  };
 
@@ -500,12 +555,145 @@ static const TypeInfo aspeed_2600_sdmc_info = {
      .class_init = aspeed_2600_sdmc_class_init,
  };
 
+static void aspeed_2700_sdmc_reset(DeviceState *dev)
+{
+    AspeedSDMCState *s = ASPEED_SDMC(dev);
+    AspeedSDMCClass *asc = ASPEED_SDMC_GET_CLASS(s);
+
+    memset(s->regs, 0, sizeof(s->regs));
+
+    /* Set ram size bit and defaults values */
+    s->regs[R_MAIN_CONF] = asc->compute_conf(s, 0);
+
+    if (s->unlocked) {
+        s->regs[R_2700_PROT] = PROT_UNLOCKED;
+    }
+}
+
+static uint32_t aspeed_2700_sdmc_compute_conf(AspeedSDMCState *s, uint32_t data)
+{
+    uint32_t fixed_conf = ASPEED_SDMC_AST2700_PAGE_MATCHING_ENABLE |
+        ASPEED_SDMC_AST2700_DRAM_SIZE(aspeed_sdmc_get_ram_bits(s));
+
+    /* Make sure readonly bits are kept */
+    data &= ~ASPEED_SDMC_AST2700_READONLY_MASK;
+
+    return data | fixed_conf;
+}
+
+static void aspeed_2700_sdmc_write(AspeedSDMCState *s, uint32_t reg,
+                                   uint32_t data)
+{
+    /* Unprotected registers */
+    switch (reg) {
+    case R_INT_STATUS:
+    case R_INT_CLEAR:
+    case R_INT_MASK:
+    case R_MAIN_STATUS:
+    case R_ERR_STATUS:
+    case R_ECC_FAIL_STATUS:
+    case R_ECC_FAIL_ADDR:
+    case R_PROT_REGION_LOCK_STATUS:
+    case R_TEST_FAIL_ADDR:
+    case R_TEST_FAIL_D0:
+    case R_TEST_FAIL_D1:
+    case R_TEST_FAIL_D2:
+    case R_TEST_FAIL_D3:
+    case R_DBG_STATUS:
+    case R_PHY_INTERFACE_STATUS:
+    case R_GRAPHIC_MEM_BASE_ADDR:
+    case R_PORT0_INTERFACE_MONITOR0:
+    case R_PORT0_INTERFACE_MONITOR1:
+    case R_PORT0_INTERFACE_MONITOR2:
+    case R_PORT1_INTERFACE_MONITOR0:
+    case R_PORT1_INTERFACE_MONITOR1:
+    case R_PORT1_INTERFACE_MONITOR2:
+    case R_PORT2_INTERFACE_MONITOR0:
+    case R_PORT2_INTERFACE_MONITOR1:
+    case R_PORT2_INTERFACE_MONITOR2:
+    case R_PORT3_INTERFACE_MONITOR0:
+    case R_PORT3_INTERFACE_MONITOR1:
+    case R_PORT3_INTERFACE_MONITOR2:
+    case R_PORT4_INTERFACE_MONITOR0:
+    case R_PORT4_INTERFACE_MONITOR1:
+    case R_PORT4_INTERFACE_MONITOR2:
+    case R_PORT5_INTERFACE_MONITOR0:
+    case R_PORT5_INTERFACE_MONITOR1:
+    case R_PORT5_INTERFACE_MONITOR2:
+        s->regs[reg] = data;
+        return;
+    }
+
+    if (s->regs[R_2700_PROT] == PROT_HARDLOCKED) {
+        qemu_log_mask(LOG_GUEST_ERROR,
+                      "%s: SDMC is locked until system reset!\n",
+                      __func__);
+        return;
+    }
+
+    if (reg != R_2700_PROT && s->regs[R_2700_PROT] == PROT_SOFTLOCKED) {
+        qemu_log_mask(LOG_GUEST_ERROR,
+                      "%s: SDMC is locked! (write to MCR%02x blocked)\n",
+                      __func__, reg * 4);
+        return;
+    }
+
+    switch (reg) {
+    case R_2700_PROT:
+        if (data == PROT_2700_KEY_UNLOCK)  {
+            data = PROT_UNLOCKED;
+        } else if (data == PROT_KEY_HARDLOCK) {
+            data = PROT_HARDLOCKED;
+        } else {
+            data = PROT_SOFTLOCKED;
+        }
+        break;
+    case R_MAIN_CONF:
+        data = aspeed_2700_sdmc_compute_conf(s, data);
+        break;
+    case R_MAIN_STATUS:
+        /* Will never return 'busy'. */
+        data &= ~PHY_BUSY_STATE;
+        break;
+    default:
+        break;
+    }
+
+    s->regs[reg] = data;
+}
+
+static const uint64_t
+    aspeed_2700_ram_sizes[] = { 256 * MiB, 512 * MiB, 1024 * MiB,
+                                2048 * MiB, 4096 * MiB, 8192 * MiB, 0};
+
+static void aspeed_2700_sdmc_class_init(ObjectClass *klass, void *data)
+{
+    DeviceClass *dc = DEVICE_CLASS(klass);
+    AspeedSDMCClass *asc = ASPEED_SDMC_CLASS(klass);
+
+    dc->desc = "ASPEED 2700 SDRAM Memory Controller";
+    dc->reset = aspeed_2700_sdmc_reset;
+
+    asc->is_bus64bit = true;
+    asc->max_ram_size = 8 * GiB;
+    asc->compute_conf = aspeed_2700_sdmc_compute_conf;
+    asc->write = aspeed_2700_sdmc_write;
+    asc->valid_ram_sizes = aspeed_2700_ram_sizes;
+}
+
+static const TypeInfo aspeed_2700_sdmc_info = {
+    .name = TYPE_ASPEED_2700_SDMC,
+    .parent = TYPE_ASPEED_SDMC,
+    .class_init = aspeed_2700_sdmc_class_init,
+};
+
  static void aspeed_sdmc_register_types(void)
  {
      type_register_static(&aspeed_sdmc_info);
      type_register_static(&aspeed_2400_sdmc_info);
      type_register_static(&aspeed_2500_sdmc_info);
      type_register_static(&aspeed_2600_sdmc_info);
+    type_register_static(&aspeed_2700_sdmc_info);
  }
 
  type_init(aspeed_sdmc_register_types);
include/hw/misc/aspeed_sdmc.h +4 -1
index ec2d59a14f..61c979583a 100644
@@ -17,6 +17,7 @@ OBJECT_DECLARE_TYPE(AspeedSDMCState, AspeedSDMCClass, ASPEED_SDMC)
  #define TYPE_ASPEED_2400_SDMC TYPE_ASPEED_SDMC "-ast2400"
  #define TYPE_ASPEED_2500_SDMC TYPE_ASPEED_SDMC "-ast2500"
  #define TYPE_ASPEED_2600_SDMC TYPE_ASPEED_SDMC "-ast2600"
+#define TYPE_ASPEED_2700_SDMC TYPE_ASPEED_SDMC "-ast2700"
 
  /*
   * SDMC has 174 documented registers. In addition the u-boot device tree
@@ -29,7 +30,7 @@ OBJECT_DECLARE_TYPE(AspeedSDMCState, AspeedSDMCClass, ASPEED_SDMC)
   * time, and the other is in the DDR-PHY IP which is used during DDR-PHY
   * training.
   */
-#define ASPEED_SDMC_NR_REGS (0x500 >> 2)
+#define ASPEED_SDMC_NR_REGS (0x1000 >> 2)
 
  struct AspeedSDMCState {
      /*< private >*/
@@ -41,6 +42,7 @@ struct AspeedSDMCState {
      uint32_t regs[ASPEED_SDMC_NR_REGS];
      uint64_t ram_size;
      uint64_t max_ram_size;
+    bool unlocked;
  };
 
 
@@ -51,6 +53,7 @@ struct AspeedSDMCClass {
      const uint64_t *valid_ram_sizes;
      uint32_t (*compute_conf)(AspeedSDMCState *s, uint32_t data);
      void (*write)(AspeedSDMCState *s, uint32_t reg, uint32_t data);
+    bool is_bus64bit;
  };
 
  #endif /* ASPEED_SDMC_H */
#5 lore raw

PATCH v5 9/17 aspeed/smc: support different memory region ops for SMC flash region

In reply to Jamin Lin via

It set "aspeed_smc_flash_ops" struct which containing read and write callbacks to be used when I/O is performed on the SMC flash region. And it set the valid max_access_size 4 by default for all ASPEED SMC models.

However, the valid max_access_size 4 only support 32 bits CPUs. To support all ASPEED SMC model, introduce a new "const MemoryRegionOps *" attribute in AspeedSMCClass and use it in aspeed_smc_flash_realize function.

---
 hw/ssi/aspeed_smc.c         | 14 +++++++++++++-
 include/hw/ssi/aspeed_smc.h |  1 +
 2 files changed, 14 insertions(+), 1 deletion(-)
hw/ssi/aspeed_smc.c +13 -1
index df0c63469c..129d06690d 100644
@@ -1316,7 +1316,7 @@ static void aspeed_smc_flash_realize(DeviceState *dev, Error **errp)
      * Use the default segment value to size the memory region. This
      * can be changed by FW at runtime.
      */
-    memory_region_init_io(&s->mmio, OBJECT(s), &aspeed_smc_flash_ops,
+    memory_region_init_io(&s->mmio, OBJECT(s), s->asc->reg_ops,
                           s, name, s->asc->segments[s->cs].size);
     sysbus_init_mmio(SYS_BUS_DEVICE(dev), &s->mmio);
 }
@@ -1391,6 +1391,7 @@ static void aspeed_2400_smc_class_init(ObjectClass *klass, void *data)
     asc->segment_to_reg    = aspeed_smc_segment_to_reg;
     asc->reg_to_segment    = aspeed_smc_reg_to_segment;
     asc->dma_ctrl          = aspeed_smc_dma_ctrl;
+    asc->reg_ops           = &aspeed_smc_flash_ops;
 }
 
 static const TypeInfo aspeed_2400_smc_info = {
@@ -1441,6 +1442,7 @@ static void aspeed_2400_fmc_class_init(ObjectClass *klass, void *data)
     asc->segment_to_reg    = aspeed_smc_segment_to_reg;
     asc->reg_to_segment    = aspeed_smc_reg_to_segment;
     asc->dma_ctrl          = aspeed_smc_dma_ctrl;
+    asc->reg_ops           = &aspeed_smc_flash_ops;
 }
 
 static const TypeInfo aspeed_2400_fmc_info = {
@@ -1480,6 +1482,7 @@ static void aspeed_2400_spi1_class_init(ObjectClass *klass, void *data)
     asc->reg_to_segment    = aspeed_smc_reg_to_segment;
     asc->dma_ctrl          = aspeed_smc_dma_ctrl;
     asc->addr_width        = aspeed_2400_spi1_addr_width;
+    asc->reg_ops           = &aspeed_smc_flash_ops;
 }
 
 static const TypeInfo aspeed_2400_spi1_info = {
@@ -1525,6 +1528,7 @@ static void aspeed_2500_fmc_class_init(ObjectClass *klass, void *data)
     asc->segment_to_reg    = aspeed_smc_segment_to_reg;
     asc->reg_to_segment    = aspeed_smc_reg_to_segment;
     asc->dma_ctrl          = aspeed_smc_dma_ctrl;
+    asc->reg_ops           = &aspeed_smc_flash_ops;
 }
 
 static const TypeInfo aspeed_2500_fmc_info = {
@@ -1560,6 +1564,7 @@ static void aspeed_2500_spi1_class_init(ObjectClass *klass, void *data)
     asc->segment_to_reg    = aspeed_smc_segment_to_reg;
     asc->reg_to_segment    = aspeed_smc_reg_to_segment;
     asc->dma_ctrl          = aspeed_smc_dma_ctrl;
+    asc->reg_ops           = &aspeed_smc_flash_ops;
 }
 
 static const TypeInfo aspeed_2500_spi1_info = {
@@ -1595,6 +1600,7 @@ static void aspeed_2500_spi2_class_init(ObjectClass *klass, void *data)
     asc->segment_to_reg    = aspeed_smc_segment_to_reg;
     asc->reg_to_segment    = aspeed_smc_reg_to_segment;
     asc->dma_ctrl          = aspeed_smc_dma_ctrl;
+    asc->reg_ops           = &aspeed_smc_flash_ops;
 }
 
 static const TypeInfo aspeed_2500_spi2_info = {
@@ -1682,6 +1688,7 @@ static void aspeed_2600_fmc_class_init(ObjectClass *klass, void *data)
     asc->segment_to_reg    = aspeed_2600_smc_segment_to_reg;
     asc->reg_to_segment    = aspeed_2600_smc_reg_to_segment;
     asc->dma_ctrl          = aspeed_2600_smc_dma_ctrl;
+    asc->reg_ops           = &aspeed_smc_flash_ops;
 }
 
 static const TypeInfo aspeed_2600_fmc_info = {
@@ -1721,6 +1728,7 @@ static void aspeed_2600_spi1_class_init(ObjectClass *klass, void *data)
     asc->segment_to_reg    = aspeed_2600_smc_segment_to_reg;
     asc->reg_to_segment    = aspeed_2600_smc_reg_to_segment;
     asc->dma_ctrl          = aspeed_2600_smc_dma_ctrl;
+    asc->reg_ops           = &aspeed_smc_flash_ops;
 }
 
 static const TypeInfo aspeed_2600_spi1_info = {
@@ -1761,6 +1769,7 @@ static void aspeed_2600_spi2_class_init(ObjectClass *klass, void *data)
     asc->segment_to_reg    = aspeed_2600_smc_segment_to_reg;
     asc->reg_to_segment    = aspeed_2600_smc_reg_to_segment;
     asc->dma_ctrl          = aspeed_2600_smc_dma_ctrl;
+    asc->reg_ops           = &aspeed_smc_flash_ops;
 }
 
 static const TypeInfo aspeed_2600_spi2_info = {
@@ -1843,6 +1852,7 @@ static void aspeed_1030_fmc_class_init(ObjectClass *klass, void *data)
     asc->segment_to_reg    = aspeed_1030_smc_segment_to_reg;
     asc->reg_to_segment    = aspeed_1030_smc_reg_to_segment;
     asc->dma_ctrl          = aspeed_2600_smc_dma_ctrl;
+    asc->reg_ops           = &aspeed_smc_flash_ops;
 }
 
 static const TypeInfo aspeed_1030_fmc_info = {
@@ -1881,6 +1891,7 @@ static void aspeed_1030_spi1_class_init(ObjectClass *klass, void *data)
     asc->segment_to_reg    = aspeed_2600_smc_segment_to_reg;
     asc->reg_to_segment    = aspeed_2600_smc_reg_to_segment;
     asc->dma_ctrl          = aspeed_2600_smc_dma_ctrl;
+    asc->reg_ops           = &aspeed_smc_flash_ops;
 }
 
 static const TypeInfo aspeed_1030_spi1_info = {
@@ -1918,6 +1929,7 @@ static void aspeed_1030_spi2_class_init(ObjectClass *klass, void *data)
     asc->segment_to_reg    = aspeed_2600_smc_segment_to_reg;
     asc->reg_to_segment    = aspeed_2600_smc_reg_to_segment;
     asc->dma_ctrl          = aspeed_2600_smc_dma_ctrl;
+    asc->reg_ops           = &aspeed_smc_flash_ops;
 }
 
 static const TypeInfo aspeed_1030_spi2_info = {
include/hw/ssi/aspeed_smc.h +1 -0
index d305ce2e2f..234dca32b0 100644
@@ -115,6 +115,7 @@ struct AspeedSMCClass {
                            AspeedSegments *seg);
     void (*dma_ctrl)(AspeedSMCState *s, uint32_t value);
     int (*addr_width)(const AspeedSMCState *s);
+    const MemoryRegionOps *reg_ops;
 };
 
 #endif /* ASPEED_SMC_H */
Signature · 1 line
2.25.1
Reviewed-by on v5 9/17
#6 lore raw

Re: [PATCH v5 09/17] aspeed/smc: support different memory region ops for SMC flash region

Quoted 5 lines · Jamin Lin

It set "aspeed_smc_flash_ops" struct which containing read and write callbacks to be used when I/O is performed on the SMC flash region. And it set the valid max_access_size 4 by default for all ASPEED SMC models.

Quoted 7 lines

However, the valid max_access_size 4 only support 32 bits CPUs. To support all ASPEED SMC model, introduce a new "const MemoryRegionOps *" attribute in AspeedSMCClass and use it in aspeed_smc_flash_realize function.

Thanks,

C.

Quoted 126 lines
---
  hw/ssi/aspeed_smc.c         | 14 +++++++++++++-
  include/hw/ssi/aspeed_smc.h |  1 +
  2 files changed, 14 insertions(+), 1 deletion(-)
hw/ssi/aspeed_smc.c +13 -1
index df0c63469c..129d06690d 100644
@@ -1316,7 +1316,7 @@ static void aspeed_smc_flash_realize(DeviceState *dev, Error **errp)
       * Use the default segment value to size the memory region. This
       * can be changed by FW at runtime.
       */
-    memory_region_init_io(&s->mmio, OBJECT(s), &aspeed_smc_flash_ops,
+    memory_region_init_io(&s->mmio, OBJECT(s), s->asc->reg_ops,
                            s, name, s->asc->segments[s->cs].size);
      sysbus_init_mmio(SYS_BUS_DEVICE(dev), &s->mmio);
  }
@@ -1391,6 +1391,7 @@ static void aspeed_2400_smc_class_init(ObjectClass *klass, void *data)
      asc->segment_to_reg    = aspeed_smc_segment_to_reg;
      asc->reg_to_segment    = aspeed_smc_reg_to_segment;
      asc->dma_ctrl          = aspeed_smc_dma_ctrl;
+    asc->reg_ops           = &aspeed_smc_flash_ops;
  }
 
  static const TypeInfo aspeed_2400_smc_info = {
@@ -1441,6 +1442,7 @@ static void aspeed_2400_fmc_class_init(ObjectClass *klass, void *data)
      asc->segment_to_reg    = aspeed_smc_segment_to_reg;
      asc->reg_to_segment    = aspeed_smc_reg_to_segment;
      asc->dma_ctrl          = aspeed_smc_dma_ctrl;
+    asc->reg_ops           = &aspeed_smc_flash_ops;
  }
 
  static const TypeInfo aspeed_2400_fmc_info = {
@@ -1480,6 +1482,7 @@ static void aspeed_2400_spi1_class_init(ObjectClass *klass, void *data)
      asc->reg_to_segment    = aspeed_smc_reg_to_segment;
      asc->dma_ctrl          = aspeed_smc_dma_ctrl;
      asc->addr_width        = aspeed_2400_spi1_addr_width;
+    asc->reg_ops           = &aspeed_smc_flash_ops;
  }
 
  static const TypeInfo aspeed_2400_spi1_info = {
@@ -1525,6 +1528,7 @@ static void aspeed_2500_fmc_class_init(ObjectClass *klass, void *data)
      asc->segment_to_reg    = aspeed_smc_segment_to_reg;
      asc->reg_to_segment    = aspeed_smc_reg_to_segment;
      asc->dma_ctrl          = aspeed_smc_dma_ctrl;
+    asc->reg_ops           = &aspeed_smc_flash_ops;
  }
 
  static const TypeInfo aspeed_2500_fmc_info = {
@@ -1560,6 +1564,7 @@ static void aspeed_2500_spi1_class_init(ObjectClass *klass, void *data)
      asc->segment_to_reg    = aspeed_smc_segment_to_reg;
      asc->reg_to_segment    = aspeed_smc_reg_to_segment;
      asc->dma_ctrl          = aspeed_smc_dma_ctrl;
+    asc->reg_ops           = &aspeed_smc_flash_ops;
  }
 
  static const TypeInfo aspeed_2500_spi1_info = {
@@ -1595,6 +1600,7 @@ static void aspeed_2500_spi2_class_init(ObjectClass *klass, void *data)
      asc->segment_to_reg    = aspeed_smc_segment_to_reg;
      asc->reg_to_segment    = aspeed_smc_reg_to_segment;
      asc->dma_ctrl          = aspeed_smc_dma_ctrl;
+    asc->reg_ops           = &aspeed_smc_flash_ops;
  }
 
  static const TypeInfo aspeed_2500_spi2_info = {
@@ -1682,6 +1688,7 @@ static void aspeed_2600_fmc_class_init(ObjectClass *klass, void *data)
      asc->segment_to_reg    = aspeed_2600_smc_segment_to_reg;
      asc->reg_to_segment    = aspeed_2600_smc_reg_to_segment;
      asc->dma_ctrl          = aspeed_2600_smc_dma_ctrl;
+    asc->reg_ops           = &aspeed_smc_flash_ops;
  }
 
  static const TypeInfo aspeed_2600_fmc_info = {
@@ -1721,6 +1728,7 @@ static void aspeed_2600_spi1_class_init(ObjectClass *klass, void *data)
      asc->segment_to_reg    = aspeed_2600_smc_segment_to_reg;
      asc->reg_to_segment    = aspeed_2600_smc_reg_to_segment;
      asc->dma_ctrl          = aspeed_2600_smc_dma_ctrl;
+    asc->reg_ops           = &aspeed_smc_flash_ops;
  }
 
  static const TypeInfo aspeed_2600_spi1_info = {
@@ -1761,6 +1769,7 @@ static void aspeed_2600_spi2_class_init(ObjectClass *klass, void *data)
      asc->segment_to_reg    = aspeed_2600_smc_segment_to_reg;
      asc->reg_to_segment    = aspeed_2600_smc_reg_to_segment;
      asc->dma_ctrl          = aspeed_2600_smc_dma_ctrl;
+    asc->reg_ops           = &aspeed_smc_flash_ops;
  }
 
  static const TypeInfo aspeed_2600_spi2_info = {
@@ -1843,6 +1852,7 @@ static void aspeed_1030_fmc_class_init(ObjectClass *klass, void *data)
      asc->segment_to_reg    = aspeed_1030_smc_segment_to_reg;
      asc->reg_to_segment    = aspeed_1030_smc_reg_to_segment;
      asc->dma_ctrl          = aspeed_2600_smc_dma_ctrl;
+    asc->reg_ops           = &aspeed_smc_flash_ops;
  }
 
  static const TypeInfo aspeed_1030_fmc_info = {
@@ -1881,6 +1891,7 @@ static void aspeed_1030_spi1_class_init(ObjectClass *klass, void *data)
      asc->segment_to_reg    = aspeed_2600_smc_segment_to_reg;
      asc->reg_to_segment    = aspeed_2600_smc_reg_to_segment;
      asc->dma_ctrl          = aspeed_2600_smc_dma_ctrl;
+    asc->reg_ops           = &aspeed_smc_flash_ops;
  }
 
  static const TypeInfo aspeed_1030_spi1_info = {
@@ -1918,6 +1929,7 @@ static void aspeed_1030_spi2_class_init(ObjectClass *klass, void *data)
      asc->segment_to_reg    = aspeed_2600_smc_segment_to_reg;
      asc->reg_to_segment    = aspeed_2600_smc_reg_to_segment;
      asc->dma_ctrl          = aspeed_2600_smc_dma_ctrl;
+    asc->reg_ops           = &aspeed_smc_flash_ops;
  }
 
  static const TypeInfo aspeed_1030_spi2_info = {
include/hw/ssi/aspeed_smc.h +1 -0
index d305ce2e2f..234dca32b0 100644
@@ -115,6 +115,7 @@ struct AspeedSMCClass {
                             AspeedSegments *seg);
      void (*dma_ctrl)(AspeedSMCState *s, uint32_t value);
      int (*addr_width)(const AspeedSMCState *s);
+    const MemoryRegionOps *reg_ops;
  };
 
  #endif /* ASPEED_SMC_H */
#7 lore raw

PATCH v5 2/17 aspeed/sli: Add AST2700 support

In reply to Jamin Lin via

AST2700 SLI engine is designed to accelerate the
throughput between cross-die connections.
It have CPU_SLI at CPU die and IO_SLI at IO die.

Introduce dummy AST2700 SLI and SLIIO models.

---
 hw/misc/aspeed_sli.c         | 177 +++++++++++++++++++++++++++++++++++
 hw/misc/meson.build          |   3 +-
 hw/misc/trace-events         |   7 ++
 include/hw/misc/aspeed_sli.h |  27 ++++++
 4 files changed, 213 insertions(+), 1 deletion(-)
 create mode 100644 hw/misc/aspeed_sli.c
 create mode 100644 include/hw/misc/aspeed_sli.h
hw/misc/aspeed_sli.c new file +177 -0
new file mode 100644
index 0000000000..fe720ead50
@@ -0,0 +1,177 @@
+/*
+ * ASPEED SLI Controller
+ *
+ * Copyright (C) 2024 ASPEED Technology Inc.
+ *
+ * SPDX-License-Identifier: GPL-2.0-or-later
+ */
+
+#include "qemu/osdep.h"
+#include "qemu/log.h"
+#include "qemu/error-report.h"
+#include "hw/qdev-properties.h"
+#include "hw/misc/aspeed_sli.h"
+#include "qapi/error.h"
+#include "migration/vmstate.h"
+#include "trace.h"
+
+#define SLI_REGION_SIZE 0x500
+#define TO_REG(addr) ((addr) >> 2)
+
+static uint64_t aspeed_sli_read(void *opaque, hwaddr addr, unsigned int size)
+{
+    AspeedSLIState *s = ASPEED_SLI(opaque);
+    int reg = TO_REG(addr);
+
+    if (reg >= ARRAY_SIZE(s->regs)) {
+        qemu_log_mask(LOG_GUEST_ERROR,
+                      "%s: Out-of-bounds read at offset 0x%" HWADDR_PRIx "\n",
+                      __func__, addr);
+        return 0;
+    }
+
+    trace_aspeed_sli_read(addr, size, s->regs[reg]);
+    return s->regs[reg];
+}
+
+static void aspeed_sli_write(void *opaque, hwaddr addr, uint64_t data,
+                              unsigned int size)
+{
+    AspeedSLIState *s = ASPEED_SLI(opaque);
+    int reg = TO_REG(addr);
+
+    if (reg >= ARRAY_SIZE(s->regs)) {
+        qemu_log_mask(LOG_GUEST_ERROR,
+                      "%s: Out-of-bounds write at offset 0x%" HWADDR_PRIx "\n",
+                      __func__, addr);
+        return;
+    }
+
+    trace_aspeed_sli_write(addr, size, data);
+    s->regs[reg] = data;
+}
+
+static uint64_t aspeed_sliio_read(void *opaque, hwaddr addr, unsigned int size)
+{
+    AspeedSLIState *s = ASPEED_SLI(opaque);
+    int reg = TO_REG(addr);
+
+    if (reg >= ARRAY_SIZE(s->regs)) {
+        qemu_log_mask(LOG_GUEST_ERROR,
+                      "%s: Out-of-bounds read at offset 0x%" HWADDR_PRIx "\n",
+                      __func__, addr);
+        return 0;
+    }
+
+    trace_aspeed_sliio_read(addr, size, s->regs[reg]);
+    return s->regs[reg];
+}
+
+static void aspeed_sliio_write(void *opaque, hwaddr addr, uint64_t data,
+                              unsigned int size)
+{
+    AspeedSLIState *s = ASPEED_SLI(opaque);
+    int reg = TO_REG(addr);
+
+    if (reg >= ARRAY_SIZE(s->regs)) {
+        qemu_log_mask(LOG_GUEST_ERROR,
+                      "%s: Out-of-bounds write at offset 0x%" HWADDR_PRIx "\n",
+                      __func__, addr);
+        return;
+    }
+
+    trace_aspeed_sliio_write(addr, size, data);
+    s->regs[reg] = data;
+}
+
+static const MemoryRegionOps aspeed_sli_ops = {
+    .read = aspeed_sli_read,
+    .write = aspeed_sli_write,
+    .endianness = DEVICE_LITTLE_ENDIAN,
+    .valid = {
+        .min_access_size = 1,
+        .max_access_size = 4,
+    },
+};
+
+static const MemoryRegionOps aspeed_sliio_ops = {
+    .read = aspeed_sliio_read,
+    .write = aspeed_sliio_write,
+    .endianness = DEVICE_LITTLE_ENDIAN,
+    .valid = {
+        .min_access_size = 1,
+        .max_access_size = 4,
+    },
+};
+
+static void aspeed_sli_realize(DeviceState *dev, Error **errp)
+{
+    AspeedSLIState *s = ASPEED_SLI(dev);
+    SysBusDevice *sbd = SYS_BUS_DEVICE(dev);
+
+    memory_region_init_io(&s->iomem, OBJECT(s), &aspeed_sli_ops, s,
+                          TYPE_ASPEED_SLI, SLI_REGION_SIZE);
+    sysbus_init_mmio(sbd, &s->iomem);
+}
+
+static void aspeed_sliio_realize(DeviceState *dev, Error **errp)
+{
+    AspeedSLIState *s = ASPEED_SLI(dev);
+    SysBusDevice *sbd = SYS_BUS_DEVICE(dev);
+
+    memory_region_init_io(&s->iomem, OBJECT(s), &aspeed_sliio_ops, s,
+                          TYPE_ASPEED_SLI, SLI_REGION_SIZE);
+    sysbus_init_mmio(sbd, &s->iomem);
+}
+
+static void aspeed_sli_class_init(ObjectClass *klass, void *data)
+{
+    DeviceClass *dc = DEVICE_CLASS(klass);
+
+    dc->desc = "Aspeed SLI Controller";
+    dc->realize = aspeed_sli_realize;
+}
+
+static const TypeInfo aspeed_sli_info = {
+    .name          = TYPE_ASPEED_SLI,
+    .parent        = TYPE_SYS_BUS_DEVICE,
+    .instance_size = sizeof(AspeedSLIState),
+    .class_init    = aspeed_sli_class_init,
+    .abstract      = true,
+};
+
+static void aspeed_2700_sli_class_init(ObjectClass *klass, void *data)
+{
+    DeviceClass *dc = DEVICE_CLASS(klass);
+
+    dc->desc = "AST2700 SLI Controller";
+}
+
+static void aspeed_2700_sliio_class_init(ObjectClass *klass, void *data)
+{
+    DeviceClass *dc = DEVICE_CLASS(klass);
+
+    dc->desc = "AST2700 I/O SLI Controller";
+    dc->realize = aspeed_sliio_realize;
+}
+
+static const TypeInfo aspeed_2700_sli_info = {
+    .name           = TYPE_ASPEED_2700_SLI,
+    .parent         = TYPE_ASPEED_SLI,
+    .class_init     = aspeed_2700_sli_class_init,
+};
+
+static const TypeInfo aspeed_2700_sliio_info = {
+    .name           = TYPE_ASPEED_2700_SLIIO,
+    .parent         = TYPE_ASPEED_SLI,
+    .class_init     = aspeed_2700_sliio_class_init,
+};
+
+static void aspeed_sli_register_types(void)
+{
+    type_register_static(&aspeed_sli_info);
+    type_register_static(&aspeed_2700_sli_info);
+    type_register_static(&aspeed_2700_sliio_info);
+}
+
+type_init(aspeed_sli_register_types);
hw/misc/meson.build +2 -1
index 86596a3888..2ca8717be2 100644
@@ -136,7 +136,8 @@ system_ss.add(when: 'CONFIG_ASPEED_SOC', if_true: files(
   'aspeed_sbc.c',
   'aspeed_sdmc.c',
   'aspeed_xdma.c',
-  'aspeed_peci.c'))
+  'aspeed_peci.c',
+  'aspeed_sli.c'))
 
 system_ss.add(when: 'CONFIG_MSF2', if_true: files('msf2-sysreg.c'))
 system_ss.add(when: 'CONFIG_NRF51_SOC', if_true: files('nrf51_rng.c'))
hw/misc/trace-events +7 -0
index 5d241cb40a..e13b648221 100644
@@ -351,3 +351,10 @@ djmemc_write(int reg, uint64_t value, unsigned int size) "reg=0x%x value=0x%"PRI
 # iosb.c
 iosb_read(int reg, uint64_t value, unsigned int size) "reg=0x%x value=0x%"PRIx64" size=%u"
 iosb_write(int reg, uint64_t value, unsigned int size) "reg=0x%x value=0x%"PRIx64" size=%u"
+
+# aspeed_sli.c
+aspeed_sli_write(uint64_t offset, unsigned int size, uint32_t data) "To 0x%" PRIx64 " of size %u: 0x%" PRIx32
+aspeed_sli_read(uint64_t offset, unsigned int size, uint32_t data) "To 0x%" PRIx64 " of size %u: 0x%" PRIx32
+aspeed_sliio_write(uint64_t offset, unsigned int size, uint32_t data) "To 0x%" PRIx64 " of size %u: 0x%" PRIx32
+aspeed_sliio_read(uint64_t offset, unsigned int size, uint32_t data) "To 0x%" PRIx64 " of size %u: 0x%" PRIx32
+
include/hw/misc/aspeed_sli.h new file +27 -0
new file mode 100644
index 0000000000..23f346ab93
@@ -0,0 +1,27 @@
+/*
+ * ASPEED SLI Controller
+ *
+ * Copyright (C) 2024 ASPEED Technology Inc.
+ *
+ * SPDX-License-Identifier: GPL-2.0-or-later
+ */
+#ifndef ASPEED_SLI_H
+#define ASPEED_SLI_H
+
+#include "hw/sysbus.h"
+
+#define TYPE_ASPEED_SLI "aspeed.sli"
+#define TYPE_ASPEED_2700_SLI TYPE_ASPEED_SLI "-ast2700"
+#define TYPE_ASPEED_2700_SLIIO TYPE_ASPEED_SLI "io" "-ast2700"
+OBJECT_DECLARE_SIMPLE_TYPE(AspeedSLIState, ASPEED_SLI)
+
+#define ASPEED_SLI_NR_REGS  (0x500 >> 2)
+
+struct AspeedSLIState {
+    SysBusDevice parent;
+    MemoryRegion iomem;
+
+    uint32_t regs[ASPEED_SLI_NR_REGS];
+};
+
+#endif /* ASPEED_SLI_H */
Signature · 1 line
2.25.1
#8 lore raw

PATCH v5 4/17 aspeed/sdmc: fix coding style

In reply to Jamin Lin via

Fix coding style issues from checkpatch.pl

Test command:
scripts/checkpatch.pl --no-tree -f hw/misc/aspeed_sdmc.c

---
 hw/misc/aspeed_sdmc.c | 11 +++++++----
 1 file changed, 7 insertions(+), 4 deletions(-)
hw/misc/aspeed_sdmc.c +7 -4
index 74279bbe8e..873d67c592 100644
@@ -296,7 +296,8 @@ static void aspeed_2400_sdmc_write(AspeedSDMCState *s, uint32_t reg,
                                    uint32_t data)
 {
     if (reg == R_PROT) {
-        s->regs[reg] = (data == PROT_KEY_UNLOCK) ? PROT_UNLOCKED : PROT_SOFTLOCKED;
+        s->regs[reg] =
+            (data == PROT_KEY_UNLOCK) ? PROT_UNLOCKED : PROT_SOFTLOCKED;
         return;
     }
 
@@ -354,7 +355,8 @@ static void aspeed_2500_sdmc_write(AspeedSDMCState *s, uint32_t reg,
                                    uint32_t data)
 {
     if (reg == R_PROT) {
-        s->regs[reg] = (data == PROT_KEY_UNLOCK) ? PROT_UNLOCKED : PROT_SOFTLOCKED;
+        s->regs[reg] =
+            (data == PROT_KEY_UNLOCK) ? PROT_UNLOCKED : PROT_SOFTLOCKED;
         return;
     }
 
@@ -434,8 +436,9 @@ static void aspeed_2600_sdmc_write(AspeedSDMCState *s, uint32_t reg,
     }
 
     if (s->regs[R_PROT] == PROT_HARDLOCKED) {
-        qemu_log_mask(LOG_GUEST_ERROR, "%s: SDMC is locked until system reset!\n",
-                __func__);
+        qemu_log_mask(LOG_GUEST_ERROR,
+                      "%s: SDMC is locked until system reset!\n",
+                      __func__);
         return;
     }
 
Signature · 1 line
2.25.1
#9 lore raw

PATCH v5 6/17 aspeed/smc: correct device description

In reply to Jamin Lin via
---
 hw/ssi/aspeed_smc.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)
hw/ssi/aspeed_smc.c +3 -3
index 7075bc9d61..fe1cd96b80 100644
@@ -1449,7 +1449,7 @@ static void aspeed_2500_fmc_class_init(ObjectClass *klass, void *data)
     DeviceClass *dc = DEVICE_CLASS(klass);
     AspeedSMCClass *asc = ASPEED_SMC_CLASS(klass);
 
-    dc->desc               = "Aspeed 2600 FMC Controller";
+    dc->desc               = "Aspeed 2500 FMC Controller";
     asc->r_conf            = R_CONF;
     asc->r_ce_ctrl         = R_CE_CTRL;
     asc->r_ctrl0           = R_CTRL0;
@@ -1487,7 +1487,7 @@ static void aspeed_2500_spi1_class_init(ObjectClass *klass, void *data)
     DeviceClass *dc = DEVICE_CLASS(klass);
     AspeedSMCClass *asc = ASPEED_SMC_CLASS(klass);
 
-    dc->desc               = "Aspeed 2600 SPI1 Controller";
+    dc->desc               = "Aspeed 2500 SPI1 Controller";
     asc->r_conf            = R_CONF;
     asc->r_ce_ctrl         = R_CE_CTRL;
     asc->r_ctrl0           = R_CTRL0;
@@ -1522,7 +1522,7 @@ static void aspeed_2500_spi2_class_init(ObjectClass *klass, void *data)
     DeviceClass *dc = DEVICE_CLASS(klass);
     AspeedSMCClass *asc = ASPEED_SMC_CLASS(klass);
 
-    dc->desc               = "Aspeed 2600 SPI2 Controller";
+    dc->desc               = "Aspeed 2500 SPI2 Controller";
     asc->r_conf            = R_CONF;
     asc->r_ce_ctrl         = R_CE_CTRL;
     asc->r_ctrl0           = R_CTRL0;
Signature · 1 line
2.25.1
#10 lore raw

PATCH v5 10/17 aspeed/smc: Add AST2700 support

In reply to Jamin Lin via

AST2700 fmc/spi controller's address decoding unit is 64KB and only bits [31:16] are used for decoding. Introduce seg_to_reg and reg_to_seg handlers for ast2700 fmc/spi controller.
In addition, adds ast2700 fmc, spi0, spi1, and spi2 class init handler.

AST2700 is a 64 bits quad core CPUs(Cortex-a35). Introduce a new "aspeed_2700_smc_flash_ops" and set its valid "max_access_size" 8 for 64 bits data format access.

---
 hw/ssi/aspeed_smc.c | 234 +++++++++++++++++++++++++++++++++++++++++++-
 1 file changed, 233 insertions(+), 1 deletion(-)
hw/ssi/aspeed_smc.c +233 -1
index 129d06690d..49205ab76d 100644
@@ -185,7 +185,7 @@
  *   0: 4 bytes
  *   0x1FFFFFC: 32M bytes
  *
- * DMA length is from 1 byte to 32MB (AST2600, AST10x0)
+ * DMA length is from 1 byte to 32MB (AST2600, AST10x0 and AST2700)
  *   0: 1 byte
  *   0x1FFFFFF: 32M bytes
  */
@@ -1938,6 +1938,234 @@ static const TypeInfo aspeed_1030_spi2_info = {
     .class_init = aspeed_1030_spi2_class_init,
 };
 
+/*
+ * The FMC Segment Registers of the AST2700 have a 64KB unit.
+ * Only bits [31:16] are used for decoding.
+ */
+#define AST2700_SEG_ADDR_MASK 0xffff0000
+
+static uint32_t aspeed_2700_smc_segment_to_reg(const AspeedSMCState *s,
+                                               const AspeedSegments *seg)
+{
+    uint32_t reg = 0;
+
+    /* Disabled segments have a nil register */
+    if (!seg->size) {
+        return 0;
+    }
+
+    reg |= (seg->addr & AST2700_SEG_ADDR_MASK) >> 16; /* start offset */
+    reg |= (seg->addr + seg->size - 1) & AST2700_SEG_ADDR_MASK; /* end offset */
+    return reg;
+}
+
+static void aspeed_2700_smc_reg_to_segment(const AspeedSMCState *s,
+                                           uint32_t reg, AspeedSegments *seg)
+{
+    uint32_t start_offset = (reg << 16) & AST2700_SEG_ADDR_MASK;
+    uint32_t end_offset = reg & AST2700_SEG_ADDR_MASK;
+    AspeedSMCClass *asc = ASPEED_SMC_GET_CLASS(s);
+
+    if (reg) {
+        seg->addr = asc->flash_window_base + start_offset;
+        seg->size = end_offset + (64 * KiB) - start_offset;
+    } else {
+        seg->addr = asc->flash_window_base;
+        seg->size = 0;
+    }
+}
+
+static const uint32_t aspeed_2700_fmc_resets[ASPEED_SMC_R_MAX] = {
+    [R_CONF] = (CONF_FLASH_TYPE_SPI << CONF_FLASH_TYPE0 |
+            CONF_FLASH_TYPE_SPI << CONF_FLASH_TYPE1),
+    [R_CE_CTRL] = 0x0000aa00,
+    [R_CTRL0] = 0x406b0641,
+    [R_CTRL1] = 0x00000400,
+    [R_CTRL2] = 0x00000400,
+    [R_CTRL3] = 0x00000400,
+    [R_SEG_ADDR0] = 0x08000000,
+    [R_SEG_ADDR1] = 0x10000800,
+    [R_SEG_ADDR2] = 0x00000000,
+    [R_SEG_ADDR3] = 0x00000000,
+    [R_DUMMY_DATA] = 0x00010000,
+    [R_DMA_DRAM_ADDR_HIGH] = 0x00000000,
+    [R_TIMINGS] = 0x007b0000,
+};
+
+static const MemoryRegionOps aspeed_2700_smc_flash_ops = {
+    .read = aspeed_smc_flash_read,
+    .write = aspeed_smc_flash_write,
+    .endianness = DEVICE_LITTLE_ENDIAN,
+    .valid = {
+        .min_access_size = 1,
+        .max_access_size = 8,
+    },
+};
+
+static const AspeedSegments aspeed_2700_fmc_segments[] = {
+    { 0x0, 128 * MiB }, /* start address is readonly */
+    { 128 * MiB, 128 * MiB }, /* default is disabled but needed for -kernel */
+    { 256 * MiB, 128 * MiB }, /* default is disabled but needed for -kernel */
+    { 0x0, 0 }, /* disabled */
+};
+
+static void aspeed_2700_fmc_class_init(ObjectClass *klass, void *data)
+{
+    DeviceClass *dc = DEVICE_CLASS(klass);
+    AspeedSMCClass *asc = ASPEED_SMC_CLASS(klass);
+
+    dc->desc               = "Aspeed 2700 FMC Controller";
+    asc->r_conf            = R_CONF;
+    asc->r_ce_ctrl         = R_CE_CTRL;
+    asc->r_ctrl0           = R_CTRL0;
+    asc->r_timings         = R_TIMINGS;
+    asc->nregs_timings     = 3;
+    asc->conf_enable_w0    = CONF_ENABLE_W0;
+    asc->cs_num_max        = 3;
+    asc->segments          = aspeed_2700_fmc_segments;
+    asc->segment_addr_mask = 0xffffffff;
+    asc->resets            = aspeed_2700_fmc_resets;
+    asc->flash_window_base = 0x100000000;
+    asc->flash_window_size = 1 * GiB;
+    asc->features          = ASPEED_SMC_FEATURE_DMA |
+                             ASPEED_SMC_FEATURE_DMA_DRAM_ADDR_HIGH;
+    asc->dma_flash_mask    = 0x2FFFFFFC;
+    asc->dma_dram_mask     = 0xFFFFFFFC;
+    asc->dma_start_length  = 1;
+    asc->nregs             = ASPEED_SMC_R_MAX;
+    asc->segment_to_reg    = aspeed_2700_smc_segment_to_reg;
+    asc->reg_to_segment    = aspeed_2700_smc_reg_to_segment;
+    asc->dma_ctrl          = aspeed_2600_smc_dma_ctrl;
+    asc->reg_ops           = &aspeed_2700_smc_flash_ops;
+}
+
+static const TypeInfo aspeed_2700_fmc_info = {
+    .name =  "aspeed.fmc-ast2700",
+    .parent = TYPE_ASPEED_SMC,
+    .class_init = aspeed_2700_fmc_class_init,
+};
+
+static const AspeedSegments aspeed_2700_spi0_segments[] = {
+    { 0x0, 128 * MiB }, /* start address is readonly */
+    { 128 * MiB, 128 * MiB }, /* start address is readonly */
+    { 0x0, 0 }, /* disabled */
+};
+
+static void aspeed_2700_spi0_class_init(ObjectClass *klass, void *data)
+{
+    DeviceClass *dc = DEVICE_CLASS(klass);
+    AspeedSMCClass *asc = ASPEED_SMC_CLASS(klass);
+
+    dc->desc               = "Aspeed 2700 SPI0 Controller";
+    asc->r_conf            = R_CONF;
+    asc->r_ce_ctrl         = R_CE_CTRL;
+    asc->r_ctrl0           = R_CTRL0;
+    asc->r_timings         = R_TIMINGS;
+    asc->nregs_timings     = 2;
+    asc->conf_enable_w0    = CONF_ENABLE_W0;
+    asc->cs_num_max        = 2;
+    asc->segments          = aspeed_2700_spi0_segments;
+    asc->segment_addr_mask = 0xffffffff;
+    asc->flash_window_base = 0x180000000;
+    asc->flash_window_size = 1 * GiB;
+    asc->features          = ASPEED_SMC_FEATURE_DMA |
+                             ASPEED_SMC_FEATURE_DMA_DRAM_ADDR_HIGH;
+    asc->dma_flash_mask    = 0x2FFFFFFC;
+    asc->dma_dram_mask     = 0xFFFFFFFC;
+    asc->dma_start_length  = 1;
+    asc->nregs             = ASPEED_SMC_R_MAX;
+    asc->segment_to_reg    = aspeed_2700_smc_segment_to_reg;
+    asc->reg_to_segment    = aspeed_2700_smc_reg_to_segment;
+    asc->dma_ctrl          = aspeed_2600_smc_dma_ctrl;
+    asc->reg_ops           = &aspeed_2700_smc_flash_ops;
+}
+
+static const TypeInfo aspeed_2700_spi0_info = {
+    .name =  "aspeed.spi0-ast2700",
+    .parent = TYPE_ASPEED_SMC,
+    .class_init = aspeed_2700_spi0_class_init,
+};
+
+static const AspeedSegments aspeed_2700_spi1_segments[] = {
+    { 0x0, 128 * MiB }, /* start address is readonly */
+    { 0x0, 0 }, /* disabled */
+};
+
+static void aspeed_2700_spi1_class_init(ObjectClass *klass, void *data)
+{
+    DeviceClass *dc = DEVICE_CLASS(klass);
+    AspeedSMCClass *asc = ASPEED_SMC_CLASS(klass);
+
+    dc->desc               = "Aspeed 2700 SPI1 Controller";
+    asc->r_conf            = R_CONF;
+    asc->r_ce_ctrl         = R_CE_CTRL;
+    asc->r_ctrl0           = R_CTRL0;
+    asc->r_timings         = R_TIMINGS;
+    asc->nregs_timings     = 2;
+    asc->conf_enable_w0    = CONF_ENABLE_W0;
+    asc->cs_num_max        = 2;
+    asc->segments          = aspeed_2700_spi1_segments;
+    asc->segment_addr_mask = 0xffffffff;
+    asc->flash_window_base = 0x200000000;
+    asc->flash_window_size = 1 * GiB;
+    asc->features          = ASPEED_SMC_FEATURE_DMA |
+                             ASPEED_SMC_FEATURE_DMA_DRAM_ADDR_HIGH;
+    asc->dma_flash_mask    = 0x2FFFFFFC;
+    asc->dma_dram_mask     = 0xFFFFFFFC;
+    asc->dma_start_length  = 1;
+    asc->nregs             = ASPEED_SMC_R_MAX;
+    asc->segment_to_reg    = aspeed_2700_smc_segment_to_reg;
+    asc->reg_to_segment    = aspeed_2700_smc_reg_to_segment;
+    asc->dma_ctrl          = aspeed_2600_smc_dma_ctrl;
+    asc->reg_ops           = &aspeed_2700_smc_flash_ops;
+}
+
+static const TypeInfo aspeed_2700_spi1_info = {
+        .name =  "aspeed.spi1-ast2700",
+        .parent = TYPE_ASPEED_SMC,
+        .class_init = aspeed_2700_spi1_class_init,
+};
+
+static const AspeedSegments aspeed_2700_spi2_segments[] = {
+    { 0x0, 128 * MiB }, /* start address is readonly */
+    { 0x0, 0 }, /* disabled */
+};
+
+static void aspeed_2700_spi2_class_init(ObjectClass *klass, void *data)
+{
+    DeviceClass *dc = DEVICE_CLASS(klass);
+    AspeedSMCClass *asc = ASPEED_SMC_CLASS(klass);
+
+    dc->desc               = "Aspeed 2700 SPI2 Controller";
+    asc->r_conf            = R_CONF;
+    asc->r_ce_ctrl         = R_CE_CTRL;
+    asc->r_ctrl0           = R_CTRL0;
+    asc->r_timings         = R_TIMINGS;
+    asc->nregs_timings     = 2;
+    asc->conf_enable_w0    = CONF_ENABLE_W0;
+    asc->cs_num_max        = 2;
+    asc->segments          = aspeed_2700_spi2_segments;
+    asc->segment_addr_mask = 0xffffffff;
+    asc->flash_window_base = 0x280000000;
+    asc->flash_window_size = 1 * GiB;
+    asc->features          = ASPEED_SMC_FEATURE_DMA |
+                             ASPEED_SMC_FEATURE_DMA_DRAM_ADDR_HIGH;
+    asc->dma_flash_mask    = 0x0FFFFFFC;
+    asc->dma_dram_mask     = 0xFFFFFFFC;
+    asc->dma_start_length  = 1;
+    asc->nregs             = ASPEED_SMC_R_MAX;
+    asc->segment_to_reg    = aspeed_2700_smc_segment_to_reg;
+    asc->reg_to_segment    = aspeed_2700_smc_reg_to_segment;
+    asc->dma_ctrl          = aspeed_2600_smc_dma_ctrl;
+    asc->reg_ops           = &aspeed_2700_smc_flash_ops;
+}
+
+static const TypeInfo aspeed_2700_spi2_info = {
+        .name =  "aspeed.spi2-ast2700",
+        .parent = TYPE_ASPEED_SMC,
+        .class_init = aspeed_2700_spi2_class_init,
+};
+
 static void aspeed_smc_register_types(void)
 {
     type_register_static(&aspeed_smc_flash_info);
@@ -1954,6 +2182,10 @@ static void aspeed_smc_register_types(void)
     type_register_static(&aspeed_1030_fmc_info);
     type_register_static(&aspeed_1030_spi1_info);
     type_register_static(&aspeed_1030_spi2_info);
+    type_register_static(&aspeed_2700_fmc_info);
+    type_register_static(&aspeed_2700_spi0_info);
+    type_register_static(&aspeed_2700_spi1_info);
+    type_register_static(&aspeed_2700_spi2_info);
 }
 
 type_init(aspeed_smc_register_types)
Signature · 1 line
2.25.1
Reviewed-by on v5 10/17
#11 lore raw

Re: [PATCH v5 10/17] aspeed/smc: Add AST2700 support

Quoted 11 lines · Jamin Lin

AST2700 fmc/spi controller's address decoding unit is 64KB and only bits [31:16] are used for decoding. Introduce seg_to_reg and reg_to_seg handlers for ast2700 fmc/spi controller.
In addition, adds ast2700 fmc, spi0, spi1, and spi2 class init handler.

AST2700 is a 64 bits quad core CPUs(Cortex-a35). Introduce a new "aspeed_2700_smc_flash_ops" and set its valid "max_access_size" 8 for 64 bits data format access.

Thanks,

C.

Quoted 263 lines
---
  hw/ssi/aspeed_smc.c | 234 +++++++++++++++++++++++++++++++++++++++++++-
  1 file changed, 233 insertions(+), 1 deletion(-)
hw/ssi/aspeed_smc.c +233 -1
index 129d06690d..49205ab76d 100644
@@ -185,7 +185,7 @@
   *   0: 4 bytes
   *   0x1FFFFFC: 32M bytes
   *
- * DMA length is from 1 byte to 32MB (AST2600, AST10x0)
+ * DMA length is from 1 byte to 32MB (AST2600, AST10x0 and AST2700)
   *   0: 1 byte
   *   0x1FFFFFF: 32M bytes
   */
@@ -1938,6 +1938,234 @@ static const TypeInfo aspeed_1030_spi2_info = {
      .class_init = aspeed_1030_spi2_class_init,
  };
 
+/*
+ * The FMC Segment Registers of the AST2700 have a 64KB unit.
+ * Only bits [31:16] are used for decoding.
+ */
+#define AST2700_SEG_ADDR_MASK 0xffff0000
+
+static uint32_t aspeed_2700_smc_segment_to_reg(const AspeedSMCState *s,
+                                               const AspeedSegments *seg)
+{
+    uint32_t reg = 0;
+
+    /* Disabled segments have a nil register */
+    if (!seg->size) {
+        return 0;
+    }
+
+    reg |= (seg->addr & AST2700_SEG_ADDR_MASK) >> 16; /* start offset */
+    reg |= (seg->addr + seg->size - 1) & AST2700_SEG_ADDR_MASK; /* end offset */
+    return reg;
+}
+
+static void aspeed_2700_smc_reg_to_segment(const AspeedSMCState *s,
+                                           uint32_t reg, AspeedSegments *seg)
+{
+    uint32_t start_offset = (reg << 16) & AST2700_SEG_ADDR_MASK;
+    uint32_t end_offset = reg & AST2700_SEG_ADDR_MASK;
+    AspeedSMCClass *asc = ASPEED_SMC_GET_CLASS(s);
+
+    if (reg) {
+        seg->addr = asc->flash_window_base + start_offset;
+        seg->size = end_offset + (64 * KiB) - start_offset;
+    } else {
+        seg->addr = asc->flash_window_base;
+        seg->size = 0;
+    }
+}
+
+static const uint32_t aspeed_2700_fmc_resets[ASPEED_SMC_R_MAX] = {
+    [R_CONF] = (CONF_FLASH_TYPE_SPI << CONF_FLASH_TYPE0 |
+            CONF_FLASH_TYPE_SPI << CONF_FLASH_TYPE1),
+    [R_CE_CTRL] = 0x0000aa00,
+    [R_CTRL0] = 0x406b0641,
+    [R_CTRL1] = 0x00000400,
+    [R_CTRL2] = 0x00000400,
+    [R_CTRL3] = 0x00000400,
+    [R_SEG_ADDR0] = 0x08000000,
+    [R_SEG_ADDR1] = 0x10000800,
+    [R_SEG_ADDR2] = 0x00000000,
+    [R_SEG_ADDR3] = 0x00000000,
+    [R_DUMMY_DATA] = 0x00010000,
+    [R_DMA_DRAM_ADDR_HIGH] = 0x00000000,
+    [R_TIMINGS] = 0x007b0000,
+};
+
+static const MemoryRegionOps aspeed_2700_smc_flash_ops = {
+    .read = aspeed_smc_flash_read,
+    .write = aspeed_smc_flash_write,
+    .endianness = DEVICE_LITTLE_ENDIAN,
+    .valid = {
+        .min_access_size = 1,
+        .max_access_size = 8,
+    },
+};
+
+static const AspeedSegments aspeed_2700_fmc_segments[] = {
+    { 0x0, 128 * MiB }, /* start address is readonly */
+    { 128 * MiB, 128 * MiB }, /* default is disabled but needed for -kernel */
+    { 256 * MiB, 128 * MiB }, /* default is disabled but needed for -kernel */
+    { 0x0, 0 }, /* disabled */
+};
+
+static void aspeed_2700_fmc_class_init(ObjectClass *klass, void *data)
+{
+    DeviceClass *dc = DEVICE_CLASS(klass);
+    AspeedSMCClass *asc = ASPEED_SMC_CLASS(klass);
+
+    dc->desc               = "Aspeed 2700 FMC Controller";
+    asc->r_conf            = R_CONF;
+    asc->r_ce_ctrl         = R_CE_CTRL;
+    asc->r_ctrl0           = R_CTRL0;
+    asc->r_timings         = R_TIMINGS;
+    asc->nregs_timings     = 3;
+    asc->conf_enable_w0    = CONF_ENABLE_W0;
+    asc->cs_num_max        = 3;
+    asc->segments          = aspeed_2700_fmc_segments;
+    asc->segment_addr_mask = 0xffffffff;
+    asc->resets            = aspeed_2700_fmc_resets;
+    asc->flash_window_base = 0x100000000;
+    asc->flash_window_size = 1 * GiB;
+    asc->features          = ASPEED_SMC_FEATURE_DMA |
+                             ASPEED_SMC_FEATURE_DMA_DRAM_ADDR_HIGH;
+    asc->dma_flash_mask    = 0x2FFFFFFC;
+    asc->dma_dram_mask     = 0xFFFFFFFC;
+    asc->dma_start_length  = 1;
+    asc->nregs             = ASPEED_SMC_R_MAX;
+    asc->segment_to_reg    = aspeed_2700_smc_segment_to_reg;
+    asc->reg_to_segment    = aspeed_2700_smc_reg_to_segment;
+    asc->dma_ctrl          = aspeed_2600_smc_dma_ctrl;
+    asc->reg_ops           = &aspeed_2700_smc_flash_ops;
+}
+
+static const TypeInfo aspeed_2700_fmc_info = {
+    .name =  "aspeed.fmc-ast2700",
+    .parent = TYPE_ASPEED_SMC,
+    .class_init = aspeed_2700_fmc_class_init,
+};
+
+static const AspeedSegments aspeed_2700_spi0_segments[] = {
+    { 0x0, 128 * MiB }, /* start address is readonly */
+    { 128 * MiB, 128 * MiB }, /* start address is readonly */
+    { 0x0, 0 }, /* disabled */
+};
+
+static void aspeed_2700_spi0_class_init(ObjectClass *klass, void *data)
+{
+    DeviceClass *dc = DEVICE_CLASS(klass);
+    AspeedSMCClass *asc = ASPEED_SMC_CLASS(klass);
+
+    dc->desc               = "Aspeed 2700 SPI0 Controller";
+    asc->r_conf            = R_CONF;
+    asc->r_ce_ctrl         = R_CE_CTRL;
+    asc->r_ctrl0           = R_CTRL0;
+    asc->r_timings         = R_TIMINGS;
+    asc->nregs_timings     = 2;
+    asc->conf_enable_w0    = CONF_ENABLE_W0;
+    asc->cs_num_max        = 2;
+    asc->segments          = aspeed_2700_spi0_segments;
+    asc->segment_addr_mask = 0xffffffff;
+    asc->flash_window_base = 0x180000000;
+    asc->flash_window_size = 1 * GiB;
+    asc->features          = ASPEED_SMC_FEATURE_DMA |
+                             ASPEED_SMC_FEATURE_DMA_DRAM_ADDR_HIGH;
+    asc->dma_flash_mask    = 0x2FFFFFFC;
+    asc->dma_dram_mask     = 0xFFFFFFFC;
+    asc->dma_start_length  = 1;
+    asc->nregs             = ASPEED_SMC_R_MAX;
+    asc->segment_to_reg    = aspeed_2700_smc_segment_to_reg;
+    asc->reg_to_segment    = aspeed_2700_smc_reg_to_segment;
+    asc->dma_ctrl          = aspeed_2600_smc_dma_ctrl;
+    asc->reg_ops           = &aspeed_2700_smc_flash_ops;
+}
+
+static const TypeInfo aspeed_2700_spi0_info = {
+    .name =  "aspeed.spi0-ast2700",
+    .parent = TYPE_ASPEED_SMC,
+    .class_init = aspeed_2700_spi0_class_init,
+};
+
+static const AspeedSegments aspeed_2700_spi1_segments[] = {
+    { 0x0, 128 * MiB }, /* start address is readonly */
+    { 0x0, 0 }, /* disabled */
+};
+
+static void aspeed_2700_spi1_class_init(ObjectClass *klass, void *data)
+{
+    DeviceClass *dc = DEVICE_CLASS(klass);
+    AspeedSMCClass *asc = ASPEED_SMC_CLASS(klass);
+
+    dc->desc               = "Aspeed 2700 SPI1 Controller";
+    asc->r_conf            = R_CONF;
+    asc->r_ce_ctrl         = R_CE_CTRL;
+    asc->r_ctrl0           = R_CTRL0;
+    asc->r_timings         = R_TIMINGS;
+    asc->nregs_timings     = 2;
+    asc->conf_enable_w0    = CONF_ENABLE_W0;
+    asc->cs_num_max        = 2;
+    asc->segments          = aspeed_2700_spi1_segments;
+    asc->segment_addr_mask = 0xffffffff;
+    asc->flash_window_base = 0x200000000;
+    asc->flash_window_size = 1 * GiB;
+    asc->features          = ASPEED_SMC_FEATURE_DMA |
+                             ASPEED_SMC_FEATURE_DMA_DRAM_ADDR_HIGH;
+    asc->dma_flash_mask    = 0x2FFFFFFC;
+    asc->dma_dram_mask     = 0xFFFFFFFC;
+    asc->dma_start_length  = 1;
+    asc->nregs             = ASPEED_SMC_R_MAX;
+    asc->segment_to_reg    = aspeed_2700_smc_segment_to_reg;
+    asc->reg_to_segment    = aspeed_2700_smc_reg_to_segment;
+    asc->dma_ctrl          = aspeed_2600_smc_dma_ctrl;
+    asc->reg_ops           = &aspeed_2700_smc_flash_ops;
+}
+
+static const TypeInfo aspeed_2700_spi1_info = {
+        .name =  "aspeed.spi1-ast2700",
+        .parent = TYPE_ASPEED_SMC,
+        .class_init = aspeed_2700_spi1_class_init,
+};
+
+static const AspeedSegments aspeed_2700_spi2_segments[] = {
+    { 0x0, 128 * MiB }, /* start address is readonly */
+    { 0x0, 0 }, /* disabled */
+};
+
+static void aspeed_2700_spi2_class_init(ObjectClass *klass, void *data)
+{
+    DeviceClass *dc = DEVICE_CLASS(klass);
+    AspeedSMCClass *asc = ASPEED_SMC_CLASS(klass);
+
+    dc->desc               = "Aspeed 2700 SPI2 Controller";
+    asc->r_conf            = R_CONF;
+    asc->r_ce_ctrl         = R_CE_CTRL;
+    asc->r_ctrl0           = R_CTRL0;
+    asc->r_timings         = R_TIMINGS;
+    asc->nregs_timings     = 2;
+    asc->conf_enable_w0    = CONF_ENABLE_W0;
+    asc->cs_num_max        = 2;
+    asc->segments          = aspeed_2700_spi2_segments;
+    asc->segment_addr_mask = 0xffffffff;
+    asc->flash_window_base = 0x280000000;
+    asc->flash_window_size = 1 * GiB;
+    asc->features          = ASPEED_SMC_FEATURE_DMA |
+                             ASPEED_SMC_FEATURE_DMA_DRAM_ADDR_HIGH;
+    asc->dma_flash_mask    = 0x0FFFFFFC;
+    asc->dma_dram_mask     = 0xFFFFFFFC;
+    asc->dma_start_length  = 1;
+    asc->nregs             = ASPEED_SMC_R_MAX;
+    asc->segment_to_reg    = aspeed_2700_smc_segment_to_reg;
+    asc->reg_to_segment    = aspeed_2700_smc_reg_to_segment;
+    asc->dma_ctrl          = aspeed_2600_smc_dma_ctrl;
+    asc->reg_ops           = &aspeed_2700_smc_flash_ops;
+}
+
+static const TypeInfo aspeed_2700_spi2_info = {
+        .name =  "aspeed.spi2-ast2700",
+        .parent = TYPE_ASPEED_SMC,
+        .class_init = aspeed_2700_spi2_class_init,
+};
+
  static void aspeed_smc_register_types(void)
  {
      type_register_static(&aspeed_smc_flash_info);
@@ -1954,6 +2182,10 @@ static void aspeed_smc_register_types(void)
      type_register_static(&aspeed_1030_fmc_info);
      type_register_static(&aspeed_1030_spi1_info);
      type_register_static(&aspeed_1030_spi2_info);
+    type_register_static(&aspeed_2700_fmc_info);
+    type_register_static(&aspeed_2700_spi0_info);
+    type_register_static(&aspeed_2700_spi1_info);
+    type_register_static(&aspeed_2700_spi2_info);
  }
 
  type_init(aspeed_smc_register_types)
#12 lore raw

PATCH v5 7/17 aspeed/smc: support dma start length and 1 byte length unit

In reply to Jamin Lin via

DMA length is from 1 byte to 32MB for AST2600 and AST10x0 and DMA length is from 4 bytes to 32MB for AST2500.

In other words, if "R_DMA_LEN" is 0, it should move at least 1 byte data for AST2600 and AST10x0 and 4 bytes data for AST2500. To support all ASPEED SOCs, adds dma_start_length parameter to store the start length, add helper routines function to compute the dma length and update DMA_LENGTH mask to "1FFFFFF" to support dma 1 byte length unit for AST2600 and AST1030.
Currently, only supports dma length 4 bytes aligned.

---
 hw/ssi/aspeed_smc.c         | 43 ++++++++++++++++++++++++++++++-------
 include/hw/ssi/aspeed_smc.h |  1 +
 2 files changed, 36 insertions(+), 8 deletions(-)
hw/ssi/aspeed_smc.c +35 -8
index fe1cd96b80..0b8488a113 100644
@@ -178,13 +178,17 @@
  * DMA flash addresses should be 4 bytes aligned and the valid address
  * range is 0x20000000 - 0x2FFFFFFF.
  *
- * DMA length is from 4 bytes to 32MB
+ * DMA length is from 4 bytes to 32MB (AST2500)
  *   0: 4 bytes
- *   0x7FFFFF: 32M bytes
+ *   0x1FFFFFC: 32M bytes
+ *
+ * DMA length is from 1 byte to 32MB (AST2600, AST10x0)
+ *   0: 1 byte
+ *   0x1FFFFFF: 32M bytes
  */
 #define DMA_DRAM_ADDR(asc, val)   ((val) & (asc)->dma_dram_mask)
 #define DMA_FLASH_ADDR(asc, val)  ((val) & (asc)->dma_flash_mask)
-#define DMA_LENGTH(val)         ((val) & 0x01FFFFFC)
+#define DMA_LENGTH(val)         ((val) & 0x01FFFFFF)
 
 /* Flash opcodes. */
 #define SPI_OP_READ       0x03    /* Read data bytes (low frequency) */
@@ -843,6 +847,13 @@ static bool aspeed_smc_inject_read_failure(AspeedSMCState *s)
     }
 }
 
+static uint32_t aspeed_smc_dma_len(AspeedSMCState *s)
+{
+    AspeedSMCClass *asc = ASPEED_SMC_GET_CLASS(s);
+
+    return QEMU_ALIGN_UP(s->regs[R_DMA_LEN] + asc->dma_start_length, 4);
+}
+
 /*
  * Accumulate the result of the reads to provide a checksum that will
  * be used to validate the read timing settings.
@@ -850,6 +861,7 @@ static bool aspeed_smc_inject_read_failure(AspeedSMCState *s)
 static void aspeed_smc_dma_checksum(AspeedSMCState *s)
 {
     MemTxResult result;
+    uint32_t dma_len;
     uint32_t data;
 
     if (s->regs[R_DMA_CTRL] & DMA_CTRL_WRITE) {
@@ -861,7 +873,9 @@ static void aspeed_smc_dma_checksum(AspeedSMCState *s)
         aspeed_smc_dma_calibration(s);
     }
 
-    while (s->regs[R_DMA_LEN]) {
+    dma_len = aspeed_smc_dma_len(s);
+
+    while (dma_len) {
         data = address_space_ldl_le(&s->flash_as, s->regs[R_DMA_FLASH_ADDR],
                                     MEMTXATTRS_UNSPECIFIED, &result);
         if (result != MEMTX_OK) {
@@ -877,7 +891,8 @@ static void aspeed_smc_dma_checksum(AspeedSMCState *s)
          */
         s->regs[R_DMA_CHECKSUM] += data;
         s->regs[R_DMA_FLASH_ADDR] += 4;
-        s->regs[R_DMA_LEN] -= 4;
+        dma_len -= 4;
+        s->regs[R_DMA_LEN] = dma_len;
     }
 
     if (s->inject_failure && aspeed_smc_inject_read_failure(s)) {
@@ -889,14 +904,17 @@ static void aspeed_smc_dma_checksum(AspeedSMCState *s)
 static void aspeed_smc_dma_rw(AspeedSMCState *s)
 {
     MemTxResult result;
+    uint32_t dma_len;
     uint32_t data;
 
+    dma_len = aspeed_smc_dma_len(s);
+
     trace_aspeed_smc_dma_rw(s->regs[R_DMA_CTRL] & DMA_CTRL_WRITE ?
                             "write" : "read",
                             s->regs[R_DMA_FLASH_ADDR],
                             s->regs[R_DMA_DRAM_ADDR],
-                            s->regs[R_DMA_LEN]);
-    while (s->regs[R_DMA_LEN]) {
+                            dma_len);
+    while (dma_len) {
         if (s->regs[R_DMA_CTRL] & DMA_CTRL_WRITE) {
             data = address_space_ldl_le(&s->dram_as, s->regs[R_DMA_DRAM_ADDR],
                                         MEMTXATTRS_UNSPECIFIED, &result);
@@ -937,7 +955,8 @@ static void aspeed_smc_dma_rw(AspeedSMCState *s)
          */
         s->regs[R_DMA_FLASH_ADDR] += 4;
         s->regs[R_DMA_DRAM_ADDR] += 4;
-        s->regs[R_DMA_LEN] -= 4;
+        dma_len -= 4;
+        s->regs[R_DMA_LEN] = dma_len;
         s->regs[R_DMA_CHECKSUM] += data;
     }
 }
@@ -1382,6 +1401,7 @@ static void aspeed_2400_fmc_class_init(ObjectClass *klass, void *data)
     asc->features          = ASPEED_SMC_FEATURE_DMA;
     asc->dma_flash_mask    = 0x0FFFFFFC;
     asc->dma_dram_mask     = 0x1FFFFFFC;
+    asc->dma_start_length  = 4;
     asc->nregs             = ASPEED_SMC_R_MAX;
     asc->segment_to_reg    = aspeed_smc_segment_to_reg;
     asc->reg_to_segment    = aspeed_smc_reg_to_segment;
@@ -1465,6 +1485,7 @@ static void aspeed_2500_fmc_class_init(ObjectClass *klass, void *data)
     asc->features          = ASPEED_SMC_FEATURE_DMA;
     asc->dma_flash_mask    = 0x0FFFFFFC;
     asc->dma_dram_mask     = 0x3FFFFFFC;
+    asc->dma_start_length  = 4;
     asc->nregs             = ASPEED_SMC_R_MAX;
     asc->segment_to_reg    = aspeed_smc_segment_to_reg;
     asc->reg_to_segment    = aspeed_smc_reg_to_segment;
@@ -1621,6 +1642,7 @@ static void aspeed_2600_fmc_class_init(ObjectClass *klass, void *data)
                              ASPEED_SMC_FEATURE_WDT_CONTROL;
     asc->dma_flash_mask    = 0x0FFFFFFC;
     asc->dma_dram_mask     = 0x3FFFFFFC;
+    asc->dma_start_length  = 1;
     asc->nregs             = ASPEED_SMC_R_MAX;
     asc->segment_to_reg    = aspeed_2600_smc_segment_to_reg;
     asc->reg_to_segment    = aspeed_2600_smc_reg_to_segment;
@@ -1659,6 +1681,7 @@ static void aspeed_2600_spi1_class_init(ObjectClass *klass, void *data)
                              ASPEED_SMC_FEATURE_DMA_GRANT;
     asc->dma_flash_mask    = 0x0FFFFFFC;
     asc->dma_dram_mask     = 0x3FFFFFFC;
+    asc->dma_start_length  = 1;
     asc->nregs             = ASPEED_SMC_R_MAX;
     asc->segment_to_reg    = aspeed_2600_smc_segment_to_reg;
     asc->reg_to_segment    = aspeed_2600_smc_reg_to_segment;
@@ -1698,6 +1721,7 @@ static void aspeed_2600_spi2_class_init(ObjectClass *klass, void *data)
                              ASPEED_SMC_FEATURE_DMA_GRANT;
     asc->dma_flash_mask    = 0x0FFFFFFC;
     asc->dma_dram_mask     = 0x3FFFFFFC;
+    asc->dma_start_length  = 1;
     asc->nregs             = ASPEED_SMC_R_MAX;
     asc->segment_to_reg    = aspeed_2600_smc_segment_to_reg;
     asc->reg_to_segment    = aspeed_2600_smc_reg_to_segment;
@@ -1779,6 +1803,7 @@ static void aspeed_1030_fmc_class_init(ObjectClass *klass, void *data)
     asc->features          = ASPEED_SMC_FEATURE_DMA;
     asc->dma_flash_mask    = 0x0FFFFFFC;
     asc->dma_dram_mask     = 0x000BFFFC;
+    asc->dma_start_length  = 1;
     asc->nregs             = ASPEED_SMC_R_MAX;
     asc->segment_to_reg    = aspeed_1030_smc_segment_to_reg;
     asc->reg_to_segment    = aspeed_1030_smc_reg_to_segment;
@@ -1816,6 +1841,7 @@ static void aspeed_1030_spi1_class_init(ObjectClass *klass, void *data)
     asc->features          = ASPEED_SMC_FEATURE_DMA;
     asc->dma_flash_mask    = 0x0FFFFFFC;
     asc->dma_dram_mask     = 0x000BFFFC;
+    asc->dma_start_length  = 1;
     asc->nregs             = ASPEED_SMC_R_MAX;
     asc->segment_to_reg    = aspeed_2600_smc_segment_to_reg;
     asc->reg_to_segment    = aspeed_2600_smc_reg_to_segment;
@@ -1852,6 +1878,7 @@ static void aspeed_1030_spi2_class_init(ObjectClass *klass, void *data)
     asc->features          = ASPEED_SMC_FEATURE_DMA;
     asc->dma_flash_mask    = 0x0FFFFFFC;
     asc->dma_dram_mask     = 0x000BFFFC;
+    asc->dma_start_length  = 1;
     asc->nregs             = ASPEED_SMC_R_MAX;
     asc->segment_to_reg    = aspeed_2600_smc_segment_to_reg;
     asc->reg_to_segment    = aspeed_2600_smc_reg_to_segment;
include/hw/ssi/aspeed_smc.h +1 -0
index 8791cc0ecb..d305ce2e2f 100644
@@ -107,6 +107,7 @@ struct AspeedSMCClass {
     uint32_t features;
     hwaddr dma_flash_mask;
     hwaddr dma_dram_mask;
+    uint32_t dma_start_length;
     uint32_t nregs;
     uint32_t (*segment_to_reg)(const AspeedSMCState *s,
                                const AspeedSegments *seg);
Signature · 1 line
2.25.1
#13 lore raw

PATCH v5 8/17 aspeed/smc: support 64 bits dma dram address

In reply to Jamin Lin via

AST2700 support the maximum dram size is 8GiB and has a "DMA DRAM Side Address High Part(0x7C)" register to support 64 bits dma dram address. Add helper routines functions to compute the dma dram address, new features and update trace-event to support 64 bits dram address.

---
 hw/ssi/aspeed_smc.c | 51 ++++++++++++++++++++++++++++++++++++++-------
 hw/ssi/trace-events |  2 +-
 2 files changed, 44 insertions(+), 9 deletions(-)
hw/ssi/aspeed_smc.c +43 -8
index 0b8488a113..df0c63469c 100644
@@ -132,6 +132,9 @@
 #define   FMC_WDT2_CTRL_BOOT_SOURCE      BIT(4) /* O: primary 1: alternate */
 #define   FMC_WDT2_CTRL_EN               BIT(0)
 
+/* DMA DRAM Side Address High Part (AST2700) */
+#define R_DMA_DRAM_ADDR_HIGH   (0x7c / 4)
+
 /* DMA Control/Status Register */
 #define R_DMA_CTRL        (0x80 / 4)
 #define   DMA_CTRL_REQUEST      (1 << 31)
@@ -187,6 +190,7 @@
  *   0x1FFFFFF: 32M bytes
  */
 #define DMA_DRAM_ADDR(asc, val)   ((val) & (asc)->dma_dram_mask)
+#define DMA_DRAM_ADDR_HIGH(val)   ((val) & 0xf)
 #define DMA_FLASH_ADDR(asc, val)  ((val) & (asc)->dma_flash_mask)
 #define DMA_LENGTH(val)         ((val) & 0x01FFFFFF)
 
@@ -207,6 +211,7 @@ static const AspeedSegments aspeed_2500_spi2_segments[];
 #define ASPEED_SMC_FEATURE_DMA       0x1
 #define ASPEED_SMC_FEATURE_DMA_GRANT 0x2
 #define ASPEED_SMC_FEATURE_WDT_CONTROL 0x4
+#define ASPEED_SMC_FEATURE_DMA_DRAM_ADDR_HIGH 0x08
 
 static inline bool aspeed_smc_has_dma(const AspeedSMCClass *asc)
 {
@@ -218,6 +223,11 @@ static inline bool aspeed_smc_has_wdt_control(const AspeedSMCClass *asc)
     return !!(asc->features & ASPEED_SMC_FEATURE_WDT_CONTROL);
 }
 
+static inline bool aspeed_smc_has_dma64(const AspeedSMCClass *asc)
+{
+    return !!(asc->features & ASPEED_SMC_FEATURE_DMA_DRAM_ADDR_HIGH);
+}
+
 #define aspeed_smc_error(fmt, ...)                                      \
     qemu_log_mask(LOG_GUEST_ERROR, "%s: " fmt "\n", __func__, ## __VA_ARGS__)
 
@@ -747,6 +757,8 @@ static uint64_t aspeed_smc_read(void *opaque, hwaddr addr, unsigned int size)
         (aspeed_smc_has_dma(asc) && addr == R_DMA_CTRL) ||
         (aspeed_smc_has_dma(asc) && addr == R_DMA_FLASH_ADDR) ||
         (aspeed_smc_has_dma(asc) && addr == R_DMA_DRAM_ADDR) ||
+        (aspeed_smc_has_dma(asc) && aspeed_smc_has_dma64(asc) &&
+         addr == R_DMA_DRAM_ADDR_HIGH) ||
         (aspeed_smc_has_dma(asc) && addr == R_DMA_LEN) ||
         (aspeed_smc_has_dma(asc) && addr == R_DMA_CHECKSUM) ||
         (addr >= R_SEG_ADDR0 &&
@@ -847,6 +859,12 @@ static bool aspeed_smc_inject_read_failure(AspeedSMCState *s)
     }
 }
 
+static uint64_t aspeed_smc_dma_dram_addr(AspeedSMCState *s)
+{
+    return s->regs[R_DMA_DRAM_ADDR] |
+        ((uint64_t) s->regs[R_DMA_DRAM_ADDR_HIGH] << 32);
+}
+
 static uint32_t aspeed_smc_dma_len(AspeedSMCState *s)
 {
     AspeedSMCClass *asc = ASPEED_SMC_GET_CLASS(s);
@@ -903,24 +921,34 @@ static void aspeed_smc_dma_checksum(AspeedSMCState *s)
 
 static void aspeed_smc_dma_rw(AspeedSMCState *s)
 {
+    AspeedSMCClass *asc = ASPEED_SMC_GET_CLASS(s);
+    uint64_t dma_dram_offset;
+    uint64_t dma_dram_addr;
     MemTxResult result;
     uint32_t dma_len;
     uint32_t data;
 
     dma_len = aspeed_smc_dma_len(s);
+    dma_dram_addr = aspeed_smc_dma_dram_addr(s);
+
+    if (aspeed_smc_has_dma64(asc)) {
+        dma_dram_offset = dma_dram_addr - s->dram_base;
+    } else {
+        dma_dram_offset = dma_dram_addr;
+    }
 
     trace_aspeed_smc_dma_rw(s->regs[R_DMA_CTRL] & DMA_CTRL_WRITE ?
                             "write" : "read",
                             s->regs[R_DMA_FLASH_ADDR],
-                            s->regs[R_DMA_DRAM_ADDR],
+                            dma_dram_offset,
                             dma_len);
     while (dma_len) {
         if (s->regs[R_DMA_CTRL] & DMA_CTRL_WRITE) {
-            data = address_space_ldl_le(&s->dram_as, s->regs[R_DMA_DRAM_ADDR],
+            data = address_space_ldl_le(&s->dram_as, dma_dram_offset,
                                         MEMTXATTRS_UNSPECIFIED, &result);
             if (result != MEMTX_OK) {
-                aspeed_smc_error("DRAM read failed @%08x",
-                                 s->regs[R_DMA_DRAM_ADDR]);
+                aspeed_smc_error("DRAM read failed @%" PRIx64,
+                                 dma_dram_offset);
                 return;
             }
 
@@ -940,11 +968,11 @@ static void aspeed_smc_dma_rw(AspeedSMCState *s)
                 return;
             }
 
-            address_space_stl_le(&s->dram_as, s->regs[R_DMA_DRAM_ADDR],
+            address_space_stl_le(&s->dram_as, dma_dram_offset,
                                  data, MEMTXATTRS_UNSPECIFIED, &result);
             if (result != MEMTX_OK) {
-                aspeed_smc_error("DRAM write failed @%08x",
-                                 s->regs[R_DMA_DRAM_ADDR]);
+                aspeed_smc_error("DRAM write failed @%" PRIx64,
+                                 dma_dram_offset);
                 return;
             }
         }
@@ -953,8 +981,12 @@ static void aspeed_smc_dma_rw(AspeedSMCState *s)
          * When the DMA is on-going, the DMA registers are updated
          * with the current working addresses and length.
          */
+        dma_dram_offset += 4;
+        dma_dram_addr += 4;
+
+        s->regs[R_DMA_DRAM_ADDR_HIGH] = dma_dram_addr >> 32;
+        s->regs[R_DMA_DRAM_ADDR] = dma_dram_addr & 0xffffffff;
         s->regs[R_DMA_FLASH_ADDR] += 4;
-        s->regs[R_DMA_DRAM_ADDR] += 4;
         dma_len -= 4;
         s->regs[R_DMA_LEN] = dma_len;
         s->regs[R_DMA_CHECKSUM] += data;
@@ -1107,6 +1139,9 @@ static void aspeed_smc_write(void *opaque, hwaddr addr, uint64_t data,
     } else if (aspeed_smc_has_dma(asc) && addr == R_DMA_LEN &&
                aspeed_smc_dma_granted(s)) {
         s->regs[addr] = DMA_LENGTH(value);
+    } else if (aspeed_smc_has_dma(asc) && aspeed_smc_has_dma64(asc) &&
+               addr == R_DMA_DRAM_ADDR_HIGH) {
+        s->regs[addr] = DMA_DRAM_ADDR_HIGH(value);
     } else {
         qemu_log_mask(LOG_UNIMP, "%s: not implemented: 0x%" HWADDR_PRIx "\n",
                       __func__, addr);
hw/ssi/trace-events +1 -1
index 2d5bd2b83d..7b5ad6a939 100644
@@ -6,7 +6,7 @@ aspeed_smc_do_snoop(int cs, int index, int dummies, int data) "CS%d index:0x%x d
 aspeed_smc_flash_write(int cs, uint64_t addr,  uint32_t size, uint64_t data, int mode) "CS%d @0x%" PRIx64 " size %u: 0x%" PRIx64" mode:%d"
 aspeed_smc_read(uint64_t addr,  uint32_t size, uint64_t data) "@0x%" PRIx64 " size %u: 0x%" PRIx64
 aspeed_smc_dma_checksum(uint32_t addr, uint32_t data) "0x%08x: 0x%08x"
-aspeed_smc_dma_rw(const char *dir, uint32_t flash_addr, uint32_t dram_addr, uint32_t size) "%s flash:@0x%08x dram:@0x%08x size:0x%08x"
+aspeed_smc_dma_rw(const char *dir, uint32_t flash_addr, uint64_t dram_addr, uint32_t size) "%s flash:@0x%08x dram:@0x%" PRIx64 " size:0x%08x"
 aspeed_smc_write(uint64_t addr,  uint32_t size, uint64_t data) "@0x%" PRIx64 " size %u: 0x%" PRIx64
 aspeed_smc_flash_select(int cs, const char *prefix) "CS%d %sselect"
 
Signature · 1 line
2.25.1
#14 lore raw

PATCH v5 12/17 aspeed/intc: Add AST2700 support

In reply to Jamin Lin via

AST2700 interrupt controller(INTC) provides hardware interrupt interfaces to interrupt of processors PSP, SSP and TSP. In INTC, each interrupt of INT 128 to INT136 combines 32 interrupts.

Introduce a new aspeed_intc class with instance_init and realize handlers.

So far, this model only supports GICINT128 to GICINT136.
It creates 9 GICINT or-gates to connect 32 interrupts sources from GICINT128 to GICINT136 as IRQ GPIO-OUTPUT pins.
Then, this model registers IRQ handler with its IRQ GPIO-INPUT pins which connect to GICINT or-gates. And creates 9 GICINT IRQ GPIO-OUTPUT pins which connect to GIC device with GIC IRQ 128 to 136.

If one interrupt source from GICINT128 to GICINT136
set irq, the OR-GATE irq callback function is called and set irq to INTC by OR-GATE GPIO-OUTPUT pins. Then, the INTC irq callback function is called and set irq to GIC by its GICINT IRQ GPIO-OUTPUT pins. Finally, the GIC irq callback function is called and set irq to CPUs and
CPUs execute Interrupt Service Routine (ISR).

Block diagram of GICINT132:

            GICINT132
  ETH1    +-----------+
+-------->+0         3|
  ETH2    |          4|
+-------->+1         5|
  ETH3    |          6|
+-------->+2        19|                          INTC                          GIC
  UART0   |         20|            +--------------------------+
+-------->+7        21|            |                          |            +--------------+
  UART1   |         22|            |orgate0 +----> output_pin0+----------->+GIC128        |
+-------->+8        23|            |                          |            |              |
  UART2   |         24|            |orgate1 +----> output_pin1+----------->+GIC129        |
+-------->+9        25|            |                          |            |              |
  UART3   |         26|            |orgate2 +----> output_pin2+----------->+GIC130        |
+--------->10       27|            |                          |            |              |
  UART5   |         28|            |orgate3 +----> output_pin3+----------->+GIC131        |
+-------->+11       29|            |                          |            |              |
  UART6   |           +----------->+orgate4 +----> output_pin4+----------->+GIC132        |
+-------->+12       30|            |                          |            |              |
  UART7   |         31|            |orgate5 +----> output_pin5+----------->+GIC133        |
+-------->+13         |            |                          |            |              |
  UART8   |  OR[0:31] |            |orgate6 +----> output_pin6+----------->+GIC134        |
---------->14         |            |                          |            |              |
  UART9   |           |            |orgate7 +----> output_pin7+----------->+GIC135        |
--------->+15         |            |                          |            |              |
  UART10  |           |            |orgate8 +----> output_pin8+----------->+GIC136        |
--------->+16         |            |                          |            +--------------+
  UART11  |           |            +--------------------------+
+-------->+17         |
  UART12  |           |
+--------->18         |
          |           |
          |           |
          |           |
          +-----------+
---
 hw/intc/aspeed_intc.c         | 360 ++++++++++++++++++++++++++++++++++
 hw/intc/meson.build           |   1 +
 hw/intc/trace-events          |  13 ++
 include/hw/intc/aspeed_intc.h |  44 +++++
 4 files changed, 418 insertions(+)
 create mode 100644 hw/intc/aspeed_intc.c
 create mode 100644 include/hw/intc/aspeed_intc.h
hw/intc/aspeed_intc.c new file +360 -0
new file mode 100644
index 0000000000..e232361791
@@ -0,0 +1,360 @@
+/*
+ * ASPEED INTC Controller
+ *
+ * Copyright (C) 2024 ASPEED Technology Inc.
+ *
+ * SPDX-License-Identifier: GPL-2.0-or-later
+ */
+
+#include "qemu/osdep.h"
+#include "hw/intc/aspeed_intc.h"
+#include "hw/irq.h"
+#include "qemu/log.h"
+#include "trace.h"
+#include "hw/registerfields.h"
+#include "qapi/error.h"
+
+/* INTC Registers */
+REG32(GICINT128_EN,         0x1000)
+REG32(GICINT128_STATUS,     0x1004)
+REG32(GICINT129_EN,         0x1100)
+REG32(GICINT129_STATUS,     0x1104)
+REG32(GICINT130_EN,         0x1200)
+REG32(GICINT130_STATUS,     0x1204)
+REG32(GICINT131_EN,         0x1300)
+REG32(GICINT131_STATUS,     0x1304)
+REG32(GICINT132_EN,         0x1400)
+REG32(GICINT132_STATUS,     0x1404)
+REG32(GICINT133_EN,         0x1500)
+REG32(GICINT133_STATUS,     0x1504)
+REG32(GICINT134_EN,         0x1600)
+REG32(GICINT134_STATUS,     0x1604)
+REG32(GICINT135_EN,         0x1700)
+REG32(GICINT135_STATUS,     0x1704)
+REG32(GICINT136_EN,         0x1800)
+REG32(GICINT136_STATUS,     0x1804)
+
+#define GICINT_STATUS_BASE     R_GICINT128_STATUS
+
+static void aspeed_intc_update(AspeedINTCState *s, int irq, int level)
+{
+    AspeedINTCClass *aic = ASPEED_INTC_GET_CLASS(s);
+
+    if (irq >= aic->num_ints) {
+        qemu_log_mask(LOG_GUEST_ERROR, "%s: Invalid interrupt number: %d\n",
+                      __func__, irq);
+        return;
+    }
+
+    trace_aspeed_intc_update_irq(irq, level);
+    qemu_set_irq(s->output_pins[irq], level);
+}
+
+/*
+ * The address of GICINT128 to GICINT136 are from 0x1000 to 0x1804.
+ * Utilize "address & 0x0f00" to get the irq and irq output pin index
+ * The value of irq should be 0 to num_ints.
+ * The irq 0 indicates GICINT128, irq 1 indicates GICINT129 and so on.
+ */
+static void aspeed_intc_set_irq(void *opaque, int irq, int level)
+{
+    AspeedINTCState *s = (AspeedINTCState *)opaque;
+    AspeedINTCClass *aic = ASPEED_INTC_GET_CLASS(s);
+    uint32_t status_addr = GICINT_STATUS_BASE + ((0x100 * irq) >> 2);
+    uint32_t select = 0;
+    uint32_t enable;
+    int i;
+
+    if (irq >= aic->num_ints) {
+        qemu_log_mask(LOG_GUEST_ERROR, "%s: Invalid interrupt number: %d\n",
+                      __func__, irq);
+        return;
+    }
+
+    trace_aspeed_intc_set_irq(irq, level);
+    enable = s->enable[irq];
+
+    if (!level) {
+        return;
+    }
+
+    for (i = 0; i < aic->num_lines; i++) {
+        if (s->orgates[irq].levels[i]) {
+            if (enable & BIT(i)) {
+                select |= BIT(i);
+            }
+        }
+    }
+
+    if (!select) {
+        return;
+    }
+
+    trace_aspeed_intc_select(select);
+
+    if (s->mask[irq] || s->regs[status_addr]) {
+        /*
+         * a. mask is not 0 means in ISR mode
+         * sources interrupt routine are executing.
+         * b. status register value is not 0 means previous
+         * source interrupt does not be executed, yet.
+         *
+         * save source interrupt to pending variable.
+         */
+        s->pending[irq] |= select;
+        trace_aspeed_intc_pending_irq(irq, s->pending[irq]);
+    } else {
+        /*
+         * notify firmware which source interrupt are coming
+         * by setting status register
+         */
+        s->regs[status_addr] = select;
+        trace_aspeed_intc_trigger_irq(irq, s->regs[status_addr]);
+        aspeed_intc_update(s, irq, 1);
+    }
+}
+
+static uint64_t aspeed_intc_read(void *opaque, hwaddr offset, unsigned int size)
+{
+    AspeedINTCState *s = ASPEED_INTC(opaque);
+    uint32_t addr = offset >> 2;
+    uint32_t value = 0;
+
+    if (addr >= ASPEED_INTC_NR_REGS) {
+        qemu_log_mask(LOG_GUEST_ERROR,
+                      "%s: Out-of-bounds read at offset 0x%" HWADDR_PRIx "\n",
+                      __func__, offset);
+        return 0;
+    }
+
+    value = s->regs[addr];
+    trace_aspeed_intc_read(offset, size, value);
+
+    return value;
+}
+
+static void aspeed_intc_write(void *opaque, hwaddr offset, uint64_t data,
+                                        unsigned size)
+{
+    AspeedINTCState *s = ASPEED_INTC(opaque);
+    AspeedINTCClass *aic = ASPEED_INTC_GET_CLASS(s);
+    uint32_t addr = offset >> 2;
+    uint32_t old_enable;
+    uint32_t change;
+    uint32_t irq;
+
+    if (addr >= ASPEED_INTC_NR_REGS) {
+        qemu_log_mask(LOG_GUEST_ERROR,
+                      "%s: Out-of-bounds write at offset 0x%" HWADDR_PRIx "\n",
+                      __func__, offset);
+        return;
+    }
+
+    trace_aspeed_intc_write(offset, size, data);
+
+    switch (addr) {
+    case R_GICINT128_EN:
+    case R_GICINT129_EN:
+    case R_GICINT130_EN:
+    case R_GICINT131_EN:
+    case R_GICINT132_EN:
+    case R_GICINT133_EN:
+    case R_GICINT134_EN:
+    case R_GICINT135_EN:
+    case R_GICINT136_EN:
+        irq = (offset & 0x0f00) >> 8;
+
+        if (irq >= aic->num_ints) {
+            qemu_log_mask(LOG_GUEST_ERROR, "%s: Invalid interrupt number: %d\n",
+                          __func__, irq);
+            return;
+        }
+
+        /*
+         * These registers are used for enable sources interrupt and
+         * mask and unmask source interrupt while executing source ISR.
+         */
+
+        /* disable all source interrupt */
+        if (!data && !s->enable[irq]) {
+            s->regs[addr] = data;
+            return;
+        }
+
+        old_enable = s->enable[irq];
+        s->enable[irq] |= data;
+
+        /* enable new source interrupt */
+        if (old_enable != s->enable[irq]) {
+            trace_aspeed_intc_enable(s->enable[irq]);
+            s->regs[addr] = data;
+            return;
+        }
+
+        /* mask and unmask source interrupt */
+        change = s->regs[addr] ^ data;
+        if (change & data) {
+            s->mask[irq] &= ~change;
+            trace_aspeed_intc_unmask(change, s->mask[irq]);
+        } else {
+            s->mask[irq] |= change;
+            trace_aspeed_intc_mask(change, s->mask[irq]);
+        }
+        s->regs[addr] = data;
+        break;
+    case R_GICINT128_STATUS:
+    case R_GICINT129_STATUS:
+    case R_GICINT130_STATUS:
+    case R_GICINT131_STATUS:
+    case R_GICINT132_STATUS:
+    case R_GICINT133_STATUS:
+    case R_GICINT134_STATUS:
+    case R_GICINT135_STATUS:
+    case R_GICINT136_STATUS:
+        irq = (offset & 0x0f00) >> 8;
+
+        if (irq >= aic->num_ints) {
+            qemu_log_mask(LOG_GUEST_ERROR, "%s: Invalid interrupt number: %d\n",
+                          __func__, irq);
+            return;
+        }
+
+        /* clear status */
+        s->regs[addr] &= ~data;
+
+        /*
+         * These status registers are used for notify sources ISR are executed.
+         * If one source ISR is executed, it will clear one bit.
+         * If it clear all bits, it means to initialize this register status
+         * rather than sources ISR are executed.
+         */
+        if (data == 0xffffffff) {
+            return;
+        }
+
+        /* All source ISR execution are done */
+        if (!s->regs[addr]) {
+            trace_aspeed_intc_all_isr_done(irq);
+            if (s->pending[irq]) {
+                /*
+                 * handle pending source interrupt
+                 * notify firmware which source interrupt are pending
+                 * by setting status register
+                 */
+                s->regs[addr] = s->pending[irq];
+                s->pending[irq] = 0;
+                trace_aspeed_intc_trigger_irq(irq, s->regs[addr]);
+                aspeed_intc_update(s, irq, 1);
+            } else {
+                /* clear irq */
+                trace_aspeed_intc_clear_irq(irq, 0);
+                aspeed_intc_update(s, irq, 0);
+            }
+        }
+        break;
+    default:
+        s->regs[addr] = data;
+        break;
+    }
+
+    return;
+}
+
+static const MemoryRegionOps aspeed_intc_ops = {
+    .read = aspeed_intc_read,
+    .write = aspeed_intc_write,
+    .endianness = DEVICE_LITTLE_ENDIAN,
+    .valid = {
+        .min_access_size = 4,
+        .max_access_size = 4,
+    }
+};
+
+static void aspeed_intc_instance_init(Object *obj)
+{
+    AspeedINTCState *s = ASPEED_INTC(obj);
+    AspeedINTCClass *aic = ASPEED_INTC_GET_CLASS(s);
+    int i;
+
+    assert(aic->num_ints <= ASPEED_INTC_NR_INTS);
+    for (i = 0; i < aic->num_ints; i++) {
+        object_initialize_child(obj, "intc-orgates[*]", &s->orgates[i],
+                                TYPE_OR_IRQ);
+        object_property_set_int(OBJECT(&s->orgates[i]), "num-lines",
+                                aic->num_lines, &error_abort);
+    }
+}
+
+static void aspeed_intc_reset(DeviceState *dev)
+{
+    AspeedINTCState *s = ASPEED_INTC(dev);
+
+    memset(s->regs, 0, sizeof(s->regs));
+    memset(s->enable, 0, sizeof(s->enable));
+    memset(s->mask, 0, sizeof(s->mask));
+    memset(s->pending, 0, sizeof(s->pending));
+}
+
+static void aspeed_intc_realize(DeviceState *dev, Error **errp)
+{
+    SysBusDevice *sbd = SYS_BUS_DEVICE(dev);
+    AspeedINTCState *s = ASPEED_INTC(dev);
+    AspeedINTCClass *aic = ASPEED_INTC_GET_CLASS(s);
+    int i;
+
+    memory_region_init_io(&s->iomem, OBJECT(s), &aspeed_intc_ops, s,
+                          TYPE_ASPEED_INTC ".regs", ASPEED_INTC_NR_REGS << 2);
+
+    sysbus_init_mmio(sbd, &s->iomem);
+    qdev_init_gpio_in(dev, aspeed_intc_set_irq, aic->num_ints);
+
+    for (i = 0; i < aic->num_ints; i++) {
+        if (!qdev_realize(DEVICE(&s->orgates[i]), NULL, errp)) {
+            return;
+        }
+        sysbus_init_irq(sbd, &s->output_pins[i]);
+    }
+}
+
+static void aspeed_intc_class_init(ObjectClass *klass, void *data)
+{
+    DeviceClass *dc = DEVICE_CLASS(klass);
+
+    dc->desc = "ASPEED INTC Controller";
+    dc->realize = aspeed_intc_realize;
+    dc->reset = aspeed_intc_reset;
+    dc->vmsd = NULL;
+}
+
+static const TypeInfo aspeed_intc_info = {
+    .name = TYPE_ASPEED_INTC,
+    .parent = TYPE_SYS_BUS_DEVICE,
+    .instance_init = aspeed_intc_instance_init,
+    .instance_size = sizeof(AspeedINTCState),
+    .class_init = aspeed_intc_class_init,
+    .abstract = true,
+};
+
+static void aspeed_2700_intc_class_init(ObjectClass *klass, void *data)
+{
+    DeviceClass *dc = DEVICE_CLASS(klass);
+    AspeedINTCClass *aic = ASPEED_INTC_CLASS(klass);
+
+    dc->desc = "ASPEED 2700 INTC Controller";
+    aic->num_lines = 32;
+    aic->num_ints = 9;
+}
+
+static const TypeInfo aspeed_2700_intc_info = {
+    .name = TYPE_ASPEED_2700_INTC,
+    .parent = TYPE_ASPEED_INTC,
+    .class_init = aspeed_2700_intc_class_init,
+};
+
+static void aspeed_intc_register_types(void)
+{
+    type_register_static(&aspeed_intc_info);
+    type_register_static(&aspeed_2700_intc_info);
+}
+
+type_init(aspeed_intc_register_types);
hw/intc/meson.build +1 -0
index 0d1b7d0a43..afd1aa51ee 100644
@@ -14,6 +14,7 @@ system_ss.add(when: 'CONFIG_ARM_GICV3_TCG', if_true: files(
 ))
 system_ss.add(when: 'CONFIG_ALLWINNER_A10_PIC', if_true: files('allwinner-a10-pic.c'))
 system_ss.add(when: 'CONFIG_ASPEED_SOC', if_true: files('aspeed_vic.c'))
+system_ss.add(when: 'CONFIG_ASPEED_SOC', if_true: files('aspeed_intc.c'))
 system_ss.add(when: 'CONFIG_ETRAXFS', if_true: files('etraxfs_pic.c'))
 system_ss.add(when: 'CONFIG_EXYNOS4', if_true: files('exynos4210_gic.c', 'exynos4210_combiner.c'))
 system_ss.add(when: 'CONFIG_GOLDFISH_PIC', if_true: files('goldfish_pic.c'))
hw/intc/trace-events +13 -0
index b815cea129..3dcf147198 100644
@@ -79,6 +79,19 @@ aspeed_vic_update_fiq(int flags) "Raising FIQ: %d"
 aspeed_vic_update_irq(int flags) "Raising IRQ: %d"
 aspeed_vic_read(uint64_t offset, unsigned size, uint32_t value) "From 0x%" PRIx64 " of size %u: 0x%" PRIx32
 aspeed_vic_write(uint64_t offset, unsigned size, uint32_t data) "To 0x%" PRIx64 " of size %u: 0x%" PRIx32
+# aspeed_intc.c
+aspeed_intc_read(uint64_t offset, unsigned size, uint32_t value) "From 0x%" PRIx64 " of size %u: 0x%" PRIx32
+aspeed_intc_write(uint64_t offset, unsigned size, uint32_t data) "To 0x%" PRIx64 " of size %u: 0x%" PRIx32
+aspeed_intc_set_irq(int irq, int level) "Set IRQ %d: %d"
+aspeed_intc_clear_irq(int irq, int level) "Clear IRQ %d: %d"
+aspeed_intc_update_irq(int irq, int level) "Update IRQ: %d: %d"
+aspeed_intc_pending_irq(int irq, uint32_t value) "Pending IRQ: %d: 0x%x"
+aspeed_intc_trigger_irq(int irq, uint32_t value) "Trigger IRQ: %d: 0x%x"
+aspeed_intc_all_isr_done(int irq) "All source ISR execution are done: %d"
+aspeed_intc_enable(uint32_t value) "Enable: 0x%x"
+aspeed_intc_select(uint32_t value) "Select: 0x%x"
+aspeed_intc_mask(uint32_t change, uint32_t value) "Mask: 0x%x: 0x%x"
+aspeed_intc_unmask(uint32_t change, uint32_t value) "UnMask: 0x%x: 0x%x"
 
 # arm_gic.c
 gic_enable_irq(int irq) "irq %d enabled"
include/hw/intc/aspeed_intc.h new file +44 -0

44 lines not on this page · raw message

Signature · 1 line
2.25.1
Reviewed-by on v5 12/17
#15 lore raw

Re: [PATCH v5 12/17] aspeed/intc: Add AST2700 support

Quoted 58 lines · Jamin Lin

AST2700 interrupt controller(INTC) provides hardware interrupt interfaces to interrupt of processors PSP, SSP and TSP. In INTC, each interrupt of INT 128 to INT136 combines 32 interrupts.

Introduce a new aspeed_intc class with instance_init and realize handlers.

So far, this model only supports GICINT128 to GICINT136.
It creates 9 GICINT or-gates to connect 32 interrupts sources from GICINT128 to GICINT136 as IRQ GPIO-OUTPUT pins.
Then, this model registers IRQ handler with its IRQ GPIO-INPUT pins which connect to GICINT or-gates. And creates 9 GICINT IRQ GPIO-OUTPUT pins which connect to GIC device with GIC IRQ 128 to 136.

If one interrupt source from GICINT128 to GICINT136
set irq, the OR-GATE irq callback function is called and set irq to INTC by OR-GATE GPIO-OUTPUT pins. Then, the INTC irq callback function is called and set irq to GIC by its GICINT IRQ GPIO-OUTPUT pins. Finally, the GIC irq callback function is called and set irq to CPUs and
CPUs execute Interrupt Service Routine (ISR).

Block diagram of GICINT132:

             GICINT132
   ETH1    +-----------+
+-------->+0         3|
   ETH2    |          4|
+-------->+1         5|
   ETH3    |          6|
+-------->+2        19|                          INTC                          GIC
   UART0   |         20|            +--------------------------+
+-------->+7        21|            |                          |            +--------------+
   UART1   |         22|            |orgate0 +----> output_pin0+----------->+GIC128        |
+-------->+8        23|            |                          |            |              |
   UART2   |         24|            |orgate1 +----> output_pin1+----------->+GIC129        |
+-------->+9        25|            |                          |            |              |
   UART3   |         26|            |orgate2 +----> output_pin2+----------->+GIC130        |
+--------->10       27|            |                          |            |              |
   UART5   |         28|            |orgate3 +----> output_pin3+----------->+GIC131        |
+-------->+11       29|            |                          |            |              |
   UART6   |           +----------->+orgate4 +----> output_pin4+----------->+GIC132        |
+-------->+12       30|            |                          |            |              |
   UART7   |         31|            |orgate5 +----> output_pin5+----------->+GIC133        |
+-------->+13         |            |                          |            |              |
   UART8   |  OR[0:31] |            |orgate6 +----> output_pin6+----------->+GIC134        |
---------->14         |            |                          |            |              |
   UART9   |           |            |orgate7 +----> output_pin7+----------->+GIC135        |
--------->+15         |            |                          |            |              |
   UART10  |           |            |orgate8 +----> output_pin8+----------->+GIC136        |
--------->+16         |            |                          |            +--------------+
   UART11  |           |            +--------------------------+
+-------->+17         |
   UART12  |           |
+--------->18         |
           |           |
           |           |
           |           |
           +-----------+
Quoted 2 lines

Thanks,

C.

Quoted 461 lines
---
  hw/intc/aspeed_intc.c         | 360 ++++++++++++++++++++++++++++++++++
  hw/intc/meson.build           |   1 +
  hw/intc/trace-events          |  13 ++
  include/hw/intc/aspeed_intc.h |  44 +++++
  4 files changed, 418 insertions(+)

create mode 100644 hw/intc/aspeed_intc.c create mode 100644 include/hw/intc/aspeed_intc.h

hw/intc/aspeed_intc.c new file +360 -0
new file mode 100644
index 0000000000..e232361791
@@ -0,0 +1,360 @@
+/*
+ * ASPEED INTC Controller
+ *
+ * Copyright (C) 2024 ASPEED Technology Inc.
+ *
+ * SPDX-License-Identifier: GPL-2.0-or-later
+ */
+
+#include "qemu/osdep.h"
+#include "hw/intc/aspeed_intc.h"
+#include "hw/irq.h"
+#include "qemu/log.h"
+#include "trace.h"
+#include "hw/registerfields.h"
+#include "qapi/error.h"
+
+/* INTC Registers */
+REG32(GICINT128_EN,         0x1000)
+REG32(GICINT128_STATUS,     0x1004)
+REG32(GICINT129_EN,         0x1100)
+REG32(GICINT129_STATUS,     0x1104)
+REG32(GICINT130_EN,         0x1200)
+REG32(GICINT130_STATUS,     0x1204)
+REG32(GICINT131_EN,         0x1300)
+REG32(GICINT131_STATUS,     0x1304)
+REG32(GICINT132_EN,         0x1400)
+REG32(GICINT132_STATUS,     0x1404)
+REG32(GICINT133_EN,         0x1500)
+REG32(GICINT133_STATUS,     0x1504)
+REG32(GICINT134_EN,         0x1600)
+REG32(GICINT134_STATUS,     0x1604)
+REG32(GICINT135_EN,         0x1700)
+REG32(GICINT135_STATUS,     0x1704)
+REG32(GICINT136_EN,         0x1800)
+REG32(GICINT136_STATUS,     0x1804)
+
+#define GICINT_STATUS_BASE     R_GICINT128_STATUS
+
+static void aspeed_intc_update(AspeedINTCState *s, int irq, int level)
+{
+    AspeedINTCClass *aic = ASPEED_INTC_GET_CLASS(s);
+
+    if (irq >= aic->num_ints) {
+        qemu_log_mask(LOG_GUEST_ERROR, "%s: Invalid interrupt number: %d\n",
+                      __func__, irq);
+        return;
+    }
+
+    trace_aspeed_intc_update_irq(irq, level);
+    qemu_set_irq(s->output_pins[irq], level);
+}
+
+/*
+ * The address of GICINT128 to GICINT136 are from 0x1000 to 0x1804.
+ * Utilize "address & 0x0f00" to get the irq and irq output pin index
+ * The value of irq should be 0 to num_ints.
+ * The irq 0 indicates GICINT128, irq 1 indicates GICINT129 and so on.
+ */
+static void aspeed_intc_set_irq(void *opaque, int irq, int level)
+{
+    AspeedINTCState *s = (AspeedINTCState *)opaque;
+    AspeedINTCClass *aic = ASPEED_INTC_GET_CLASS(s);
+    uint32_t status_addr = GICINT_STATUS_BASE + ((0x100 * irq) >> 2);
+    uint32_t select = 0;
+    uint32_t enable;
+    int i;
+
+    if (irq >= aic->num_ints) {
+        qemu_log_mask(LOG_GUEST_ERROR, "%s: Invalid interrupt number: %d\n",
+                      __func__, irq);
+        return;
+    }
+
+    trace_aspeed_intc_set_irq(irq, level);
+    enable = s->enable[irq];
+
+    if (!level) {
+        return;
+    }
+
+    for (i = 0; i < aic->num_lines; i++) {
+        if (s->orgates[irq].levels[i]) {
+            if (enable & BIT(i)) {
+                select |= BIT(i);
+            }
+        }
+    }
+
+    if (!select) {
+        return;
+    }
+
+    trace_aspeed_intc_select(select);
+
+    if (s->mask[irq] || s->regs[status_addr]) {
+        /*
+         * a. mask is not 0 means in ISR mode
+         * sources interrupt routine are executing.
+         * b. status register value is not 0 means previous
+         * source interrupt does not be executed, yet.
+         *
+         * save source interrupt to pending variable.
+         */
+        s->pending[irq] |= select;
+        trace_aspeed_intc_pending_irq(irq, s->pending[irq]);
+    } else {
+        /*
+         * notify firmware which source interrupt are coming
+         * by setting status register
+         */
+        s->regs[status_addr] = select;
+        trace_aspeed_intc_trigger_irq(irq, s->regs[status_addr]);
+        aspeed_intc_update(s, irq, 1);
+    }
+}
+
+static uint64_t aspeed_intc_read(void *opaque, hwaddr offset, unsigned int size)
+{
+    AspeedINTCState *s = ASPEED_INTC(opaque);
+    uint32_t addr = offset >> 2;
+    uint32_t value = 0;
+
+    if (addr >= ASPEED_INTC_NR_REGS) {
+        qemu_log_mask(LOG_GUEST_ERROR,
+                      "%s: Out-of-bounds read at offset 0x%" HWADDR_PRIx "\n",
+                      __func__, offset);
+        return 0;
+    }
+
+    value = s->regs[addr];
+    trace_aspeed_intc_read(offset, size, value);
+
+    return value;
+}
+
+static void aspeed_intc_write(void *opaque, hwaddr offset, uint64_t data,
+                                        unsigned size)
+{
+    AspeedINTCState *s = ASPEED_INTC(opaque);
+    AspeedINTCClass *aic = ASPEED_INTC_GET_CLASS(s);
+    uint32_t addr = offset >> 2;
+    uint32_t old_enable;
+    uint32_t change;
+    uint32_t irq;
+
+    if (addr >= ASPEED_INTC_NR_REGS) {
+        qemu_log_mask(LOG_GUEST_ERROR,
+                      "%s: Out-of-bounds write at offset 0x%" HWADDR_PRIx "\n",
+                      __func__, offset);
+        return;
+    }
+
+    trace_aspeed_intc_write(offset, size, data);
+
+    switch (addr) {
+    case R_GICINT128_EN:
+    case R_GICINT129_EN:
+    case R_GICINT130_EN:
+    case R_GICINT131_EN:
+    case R_GICINT132_EN:
+    case R_GICINT133_EN:
+    case R_GICINT134_EN:
+    case R_GICINT135_EN:
+    case R_GICINT136_EN:
+        irq = (offset & 0x0f00) >> 8;
+
+        if (irq >= aic->num_ints) {
+            qemu_log_mask(LOG_GUEST_ERROR, "%s: Invalid interrupt number: %d\n",
+                          __func__, irq);
+            return;
+        }
+
+        /*
+         * These registers are used for enable sources interrupt and
+         * mask and unmask source interrupt while executing source ISR.
+         */
+
+        /* disable all source interrupt */
+        if (!data && !s->enable[irq]) {
+            s->regs[addr] = data;
+            return;
+        }
+
+        old_enable = s->enable[irq];
+        s->enable[irq] |= data;
+
+        /* enable new source interrupt */
+        if (old_enable != s->enable[irq]) {
+            trace_aspeed_intc_enable(s->enable[irq]);
+            s->regs[addr] = data;
+            return;
+        }
+
+        /* mask and unmask source interrupt */
+        change = s->regs[addr] ^ data;
+        if (change & data) {
+            s->mask[irq] &= ~change;
+            trace_aspeed_intc_unmask(change, s->mask[irq]);
+        } else {
+            s->mask[irq] |= change;
+            trace_aspeed_intc_mask(change, s->mask[irq]);
+        }
+        s->regs[addr] = data;
+        break;
+    case R_GICINT128_STATUS:
+    case R_GICINT129_STATUS:
+    case R_GICINT130_STATUS:
+    case R_GICINT131_STATUS:
+    case R_GICINT132_STATUS:
+    case R_GICINT133_STATUS:
+    case R_GICINT134_STATUS:
+    case R_GICINT135_STATUS:
+    case R_GICINT136_STATUS:
+        irq = (offset & 0x0f00) >> 8;
+
+        if (irq >= aic->num_ints) {
+            qemu_log_mask(LOG_GUEST_ERROR, "%s: Invalid interrupt number: %d\n",
+                          __func__, irq);
+            return;
+        }
+
+        /* clear status */
+        s->regs[addr] &= ~data;
+
+        /*
+         * These status registers are used for notify sources ISR are executed.
+         * If one source ISR is executed, it will clear one bit.
+         * If it clear all bits, it means to initialize this register status
+         * rather than sources ISR are executed.
+         */
+        if (data == 0xffffffff) {
+            return;
+        }
+
+        /* All source ISR execution are done */
+        if (!s->regs[addr]) {
+            trace_aspeed_intc_all_isr_done(irq);
+            if (s->pending[irq]) {
+                /*
+                 * handle pending source interrupt
+                 * notify firmware which source interrupt are pending
+                 * by setting status register
+                 */
+                s->regs[addr] = s->pending[irq];
+                s->pending[irq] = 0;
+                trace_aspeed_intc_trigger_irq(irq, s->regs[addr]);
+                aspeed_intc_update(s, irq, 1);
+            } else {
+                /* clear irq */
+                trace_aspeed_intc_clear_irq(irq, 0);
+                aspeed_intc_update(s, irq, 0);
+            }
+        }
+        break;
+    default:
+        s->regs[addr] = data;
+        break;
+    }
+
+    return;
+}
+
+static const MemoryRegionOps aspeed_intc_ops = {
+    .read = aspeed_intc_read,
+    .write = aspeed_intc_write,
+    .endianness = DEVICE_LITTLE_ENDIAN,
+    .valid = {
+        .min_access_size = 4,
+        .max_access_size = 4,
+    }
+};
+
+static void aspeed_intc_instance_init(Object *obj)
+{
+    AspeedINTCState *s = ASPEED_INTC(obj);
+    AspeedINTCClass *aic = ASPEED_INTC_GET_CLASS(s);
+    int i;
+
+    assert(aic->num_ints <= ASPEED_INTC_NR_INTS);
+    for (i = 0; i < aic->num_ints; i++) {
+        object_initialize_child(obj, "intc-orgates[*]", &s->orgates[i],
+                                TYPE_OR_IRQ);
+        object_property_set_int(OBJECT(&s->orgates[i]), "num-lines",
+                                aic->num_lines, &error_abort);
+    }
+}
+
+static void aspeed_intc_reset(DeviceState *dev)
+{
+    AspeedINTCState *s = ASPEED_INTC(dev);
+
+    memset(s->regs, 0, sizeof(s->regs));
+    memset(s->enable, 0, sizeof(s->enable));
+    memset(s->mask, 0, sizeof(s->mask));
+    memset(s->pending, 0, sizeof(s->pending));
+}
+
+static void aspeed_intc_realize(DeviceState *dev, Error **errp)
+{
+    SysBusDevice *sbd = SYS_BUS_DEVICE(dev);
+    AspeedINTCState *s = ASPEED_INTC(dev);
+    AspeedINTCClass *aic = ASPEED_INTC_GET_CLASS(s);
+    int i;
+
+    memory_region_init_io(&s->iomem, OBJECT(s), &aspeed_intc_ops, s,
+                          TYPE_ASPEED_INTC ".regs", ASPEED_INTC_NR_REGS << 2);
+
+    sysbus_init_mmio(sbd, &s->iomem);
+    qdev_init_gpio_in(dev, aspeed_intc_set_irq, aic->num_ints);
+
+    for (i = 0; i < aic->num_ints; i++) {
+        if (!qdev_realize(DEVICE(&s->orgates[i]), NULL, errp)) {
+            return;
+        }
+        sysbus_init_irq(sbd, &s->output_pins[i]);
+    }
+}
+
+static void aspeed_intc_class_init(ObjectClass *klass, void *data)
+{
+    DeviceClass *dc = DEVICE_CLASS(klass);
+
+    dc->desc = "ASPEED INTC Controller";
+    dc->realize = aspeed_intc_realize;
+    dc->reset = aspeed_intc_reset;
+    dc->vmsd = NULL;
+}
+
+static const TypeInfo aspeed_intc_info = {
+    .name = TYPE_ASPEED_INTC,
+    .parent = TYPE_SYS_BUS_DEVICE,
+    .instance_init = aspeed_intc_instance_init,
+    .instance_size = sizeof(AspeedINTCState),
+    .class_init = aspeed_intc_class_init,
+    .abstract = true,
+};
+
+static void aspeed_2700_intc_class_init(ObjectClass *klass, void *data)
+{
+    DeviceClass *dc = DEVICE_CLASS(klass);
+    AspeedINTCClass *aic = ASPEED_INTC_CLASS(klass);
+
+    dc->desc = "ASPEED 2700 INTC Controller";
+    aic->num_lines = 32;
+    aic->num_ints = 9;
+}
+
+static const TypeInfo aspeed_2700_intc_info = {
+    .name = TYPE_ASPEED_2700_INTC,
+    .parent = TYPE_ASPEED_INTC,
+    .class_init = aspeed_2700_intc_class_init,
+};
+
+static void aspeed_intc_register_types(void)
+{
+    type_register_static(&aspeed_intc_info);
+    type_register_static(&aspeed_2700_intc_info);
+}
+
+type_init(aspeed_intc_register_types);
hw/intc/meson.build +1 -0
index 0d1b7d0a43..afd1aa51ee 100644
@@ -14,6 +14,7 @@ system_ss.add(when: 'CONFIG_ARM_GICV3_TCG', if_true: files(
  ))
  system_ss.add(when: 'CONFIG_ALLWINNER_A10_PIC', if_true: files('allwinner-a10-pic.c'))
  system_ss.add(when: 'CONFIG_ASPEED_SOC', if_true: files('aspeed_vic.c'))
+system_ss.add(when: 'CONFIG_ASPEED_SOC', if_true: files('aspeed_intc.c'))
  system_ss.add(when: 'CONFIG_ETRAXFS', if_true: files('etraxfs_pic.c'))
  system_ss.add(when: 'CONFIG_EXYNOS4', if_true: files('exynos4210_gic.c', 'exynos4210_combiner.c'))
  system_ss.add(when: 'CONFIG_GOLDFISH_PIC', if_true: files('goldfish_pic.c'))
hw/intc/trace-events +13 -0
index b815cea129..3dcf147198 100644
@@ -79,6 +79,19 @@ aspeed_vic_update_fiq(int flags) "Raising FIQ: %d"
  aspeed_vic_update_irq(int flags) "Raising IRQ: %d"
  aspeed_vic_read(uint64_t offset, unsigned size, uint32_t value) "From 0x%" PRIx64 " of size %u: 0x%" PRIx32
  aspeed_vic_write(uint64_t offset, unsigned size, uint32_t data) "To 0x%" PRIx64 " of size %u: 0x%" PRIx32
+# aspeed_intc.c
+aspeed_intc_read(uint64_t offset, unsigned size, uint32_t value) "From 0x%" PRIx64 " of size %u: 0x%" PRIx32
+aspeed_intc_write(uint64_t offset, unsigned size, uint32_t data) "To 0x%" PRIx64 " of size %u: 0x%" PRIx32
+aspeed_intc_set_irq(int irq, int level) "Set IRQ %d: %d"
+aspeed_intc_clear_irq(int irq, int level) "Clear IRQ %d: %d"
+aspeed_intc_update_irq(int irq, int level) "Update IRQ: %d: %d"
+aspeed_intc_pending_irq(int irq, uint32_t value) "Pending IRQ: %d: 0x%x"
+aspeed_intc_trigger_irq(int irq, uint32_t value) "Trigger IRQ: %d: 0x%x"
+aspeed_intc_all_isr_done(int irq) "All source ISR execution are done: %d"
+aspeed_intc_enable(uint32_t value) "Enable: 0x%x"
+aspeed_intc_select(uint32_t value) "Select: 0x%x"
+aspeed_intc_mask(uint32_t change, uint32_t value) "Mask: 0x%x: 0x%x"
+aspeed_intc_unmask(uint32_t change, uint32_t value) "UnMask: 0x%x: 0x%x"
 
  # arm_gic.c
  gic_enable_irq(int irq) "irq %d enabled"
include/hw/intc/aspeed_intc.h new file +44 -0
new file mode 100644
index 0000000000..18cb43476c
@@ -0,0 +1,44 @@
+/*
+ * ASPEED INTC Controller
+ *
+ * Copyright (C) 2024 ASPEED Technology Inc.
+ *
+ * SPDX-License-Identifier: GPL-2.0-or-later
+ */
+#ifndef ASPEED_INTC_H
+#define ASPEED_INTC_H
+
+#include "hw/sysbus.h"
+#include "qom/object.h"
+#include "hw/or-irq.h"
+
+#define TYPE_ASPEED_INTC "aspeed.intc"
+#define TYPE_ASPEED_2700_INTC TYPE_ASPEED_INTC "-ast2700"
+OBJECT_DECLARE_TYPE(AspeedINTCState, AspeedINTCClass, ASPEED_INTC)
+
+#define ASPEED_INTC_NR_REGS (0x2000 >> 2)
+#define ASPEED_INTC_NR_INTS 9
+
+struct AspeedINTCState {
+    /*< private >*/
+    SysBusDevice parent_obj;
+
+    /*< public >*/
+    MemoryRegion iomem;
+    uint32_t regs[ASPEED_INTC_NR_REGS];
+    OrIRQState orgates[ASPEED_INTC_NR_INTS];
+    qemu_irq output_pins[ASPEED_INTC_NR_INTS];
+
+    uint32_t enable[ASPEED_INTC_NR_INTS];
+    uint32_t mask[ASPEED_INTC_NR_INTS];
+    uint32_t pending[ASPEED_INTC_NR_INTS];
+};
+
+struct AspeedINTCClass {
+    SysBusDeviceClass parent_class;
+
+    uint32_t num_lines;
+    uint32_t num_ints;
+};
+
+#endif /* ASPEED_INTC_H */
#16 lore raw

PATCH v5 11/17 aspeed/scu: Add AST2700 support

In reply to Jamin Lin via

AST2700 have two SCU controllers which are SCU and SCUIO.
Both SCU and SCUIO registers are not compatible previous SOCs , introduces new registers and adds ast2700 scu, sucio class init handler.

The pclk divider selection of SCUIO is defined in SCUIO280[20:18] and the pclk divider selection of SCU is defined in SCU280[25:23]. Both of them are not compatible AST2600 SOCs, adds a get_apb_freq function and trace-event for AST2700 SCU and SCUIO.

---
 hw/misc/aspeed_scu.c         | 306 ++++++++++++++++++++++++++++++++++-
 hw/misc/trace-events         |   4 +
 include/hw/misc/aspeed_scu.h |  47 +++++-
 3 files changed, 351 insertions(+), 6 deletions(-)
hw/misc/aspeed_scu.c +305 -1
index 1ac04b6cb0..eb38ea8e19 100644
@@ -134,6 +134,48 @@
 
 #define AST2600_CLK TO_REG(0x40)
 
+#define AST2700_SILICON_REV       TO_REG(0x00)
+#define AST2700_HW_STRAP1         TO_REG(0x10)
+#define AST2700_HW_STRAP1_CLR     TO_REG(0x14)
+#define AST2700_HW_STRAP1_LOCK    TO_REG(0x20)
+#define AST2700_HW_STRAP1_SEC1    TO_REG(0x24)
+#define AST2700_HW_STRAP1_SEC2    TO_REG(0x28)
+#define AST2700_HW_STRAP1_SEC3    TO_REG(0x2C)
+
+#define AST2700_SCU_CLK_SEL_1       TO_REG(0x280)
+#define AST2700_SCU_HPLL_PARAM      TO_REG(0x300)
+#define AST2700_SCU_HPLL_EXT_PARAM  TO_REG(0x304)
+#define AST2700_SCU_DPLL_PARAM      TO_REG(0x308)
+#define AST2700_SCU_DPLL_EXT_PARAM  TO_REG(0x30c)
+#define AST2700_SCU_MPLL_PARAM      TO_REG(0x310)
+#define AST2700_SCU_MPLL_EXT_PARAM  TO_REG(0x314)
+#define AST2700_SCU_D1CLK_PARAM     TO_REG(0x320)
+#define AST2700_SCU_D2CLK_PARAM     TO_REG(0x330)
+#define AST2700_SCU_CRT1CLK_PARAM   TO_REG(0x340)
+#define AST2700_SCU_CRT2CLK_PARAM   TO_REG(0x350)
+#define AST2700_SCU_MPHYCLK_PARAM   TO_REG(0x360)
+#define AST2700_SCU_FREQ_CNTR       TO_REG(0x3b0)
+#define AST2700_SCU_CPU_SCRATCH_0   TO_REG(0x780)
+#define AST2700_SCU_CPU_SCRATCH_1   TO_REG(0x784)
+
+#define AST2700_SCUIO_CLK_STOP_CTL_1    TO_REG(0x240)
+#define AST2700_SCUIO_CLK_STOP_CLR_1    TO_REG(0x244)
+#define AST2700_SCUIO_CLK_STOP_CTL_2    TO_REG(0x260)
+#define AST2700_SCUIO_CLK_STOP_CLR_2    TO_REG(0x264)
+#define AST2700_SCUIO_CLK_SEL_1         TO_REG(0x280)
+#define AST2700_SCUIO_CLK_SEL_2         TO_REG(0x284)
+#define AST2700_SCUIO_HPLL_PARAM        TO_REG(0x300)
+#define AST2700_SCUIO_HPLL_EXT_PARAM    TO_REG(0x304)
+#define AST2700_SCUIO_APLL_PARAM        TO_REG(0x310)
+#define AST2700_SCUIO_APLL_EXT_PARAM    TO_REG(0x314)
+#define AST2700_SCUIO_DPLL_PARAM        TO_REG(0x320)
+#define AST2700_SCUIO_DPLL_EXT_PARAM    TO_REG(0x324)
+#define AST2700_SCUIO_DPLL_PARAM_READ   TO_REG(0x328)
+#define AST2700_SCUIO_DPLL_EXT_PARAM_READ TO_REG(0x32c)
+#define AST2700_SCUIO_UARTCLK_GEN       TO_REG(0x330)
+#define AST2700_SCUIO_HUARTCLK_GEN      TO_REG(0x334)
+#define AST2700_SCUIO_CLK_DUTY_MEAS_RST TO_REG(0x388)
+
 #define SCU_IO_REGION_SIZE 0x1000
 
 static const uint32_t ast2400_a0_resets[ASPEED_SCU_NR_REGS] = {
@@ -244,6 +286,25 @@ static uint32_t aspeed_1030_scu_get_apb_freq(AspeedSCUState *s)
         / asc->apb_divider;
 }
 
+static uint32_t aspeed_2700_scu_get_apb_freq(AspeedSCUState *s)
+{
+    AspeedSCUClass *asc = ASPEED_SCU_GET_CLASS(s);
+    uint32_t hpll = asc->calc_hpll(s, s->regs[AST2700_SCU_HPLL_PARAM]);
+
+    return hpll / (SCU_CLK_GET_PCLK_DIV(s->regs[AST2700_SCU_CLK_SEL_1]) + 1)
+           / asc->apb_divider;
+}
+
+static uint32_t aspeed_2700_scuio_get_apb_freq(AspeedSCUState *s)
+{
+    AspeedSCUClass *asc = ASPEED_SCU_GET_CLASS(s);
+    uint32_t hpll = asc->calc_hpll(s, s->regs[AST2700_SCUIO_HPLL_PARAM]);
+
+    return hpll /
+        (SCUIO_AST2700_CLK_GET_PCLK_DIV(s->regs[AST2700_SCUIO_CLK_SEL_1]) + 1)
+        / asc->apb_divider;
+}
+
 static uint64_t aspeed_scu_read(void *opaque, hwaddr offset, unsigned size)
 {
     AspeedSCUState *s = ASPEED_SCU(opaque);
@@ -258,7 +319,8 @@ static uint64_t aspeed_scu_read(void *opaque, hwaddr offset, unsigned size)
 
     switch (reg) {
     case RNG_DATA:
-        /* On hardware, RNG_DATA works regardless of
+        /*
+         * On hardware, RNG_DATA works regardless of
          * the state of the enable bit in RNG_CTRL
          */
         s->regs[RNG_DATA] = aspeed_scu_get_random();
@@ -494,6 +556,9 @@ static uint32_t aspeed_silicon_revs[] = {
     AST2600_A3_SILICON_REV,
     AST1030_A0_SILICON_REV,
     AST1030_A1_SILICON_REV,
+    AST2700_A0_SILICON_REV,
+    AST2720_A0_SILICON_REV,
+    AST2750_A0_SILICON_REV,
 };
 
 bool is_supported_silicon_rev(uint32_t silicon_rev)
@@ -783,6 +848,243 @@ static const TypeInfo aspeed_2600_scu_info = {
     .class_init = aspeed_2600_scu_class_init,
 };
 
+static uint64_t aspeed_ast2700_scu_read(void *opaque, hwaddr offset,
+                                        unsigned size)
+{
+    AspeedSCUState *s = ASPEED_SCU(opaque);
+    int reg = TO_REG(offset);
+
+    if (reg >= ASPEED_AST2700_SCU_NR_REGS) {
+        qemu_log_mask(LOG_GUEST_ERROR,
+                      "%s: Out-of-bounds read at offset 0x%" HWADDR_PRIx "\n",
+                __func__, offset);
+        return 0;
+    }
+
+    switch (reg) {
+    default:
+        qemu_log_mask(LOG_GUEST_ERROR,
+                      "%s: Unhandled read at offset 0x%" HWADDR_PRIx "\n",
+                      __func__, offset);
+    }
+
+    trace_aspeed_ast2700_scu_read(offset, size, s->regs[reg]);
+    return s->regs[reg];
+}
+
+static void aspeed_ast2700_scu_write(void *opaque, hwaddr offset,
+                                     uint64_t data64, unsigned size)
+{
+    AspeedSCUState *s = ASPEED_SCU(opaque);
+    int reg = TO_REG(offset);
+    /* Truncate here so bitwise operations below behave as expected */
+    uint32_t data = data64;
+
+    if (reg >= ASPEED_AST2700_SCU_NR_REGS) {
+        qemu_log_mask(LOG_GUEST_ERROR,
+                      "%s: Out-of-bounds write at offset 0x%" HWADDR_PRIx "\n",
+                __func__, offset);
+        return;
+    }
+
+    trace_aspeed_ast2700_scu_write(offset, size, data);
+
+    switch (reg) {
+    default:
+        qemu_log_mask(LOG_GUEST_ERROR,
+                      "%s: Unhandeled write at offset 0x%" HWADDR_PRIx "\n",
+                      __func__, offset);
+        break;
+    }
+
+    s->regs[reg] = data;
+}
+
+static const MemoryRegionOps aspeed_ast2700_scu_ops = {
+    .read = aspeed_ast2700_scu_read,
+    .write = aspeed_ast2700_scu_write,
+    .endianness = DEVICE_LITTLE_ENDIAN,
+    .valid.min_access_size = 1,
+    .valid.max_access_size = 8,
+    .valid.unaligned = false,
+};
+
+static const uint32_t ast2700_a0_resets[ASPEED_AST2700_SCU_NR_REGS] = {
+    [AST2700_SILICON_REV]           = AST2700_A0_SILICON_REV,
+    [AST2700_HW_STRAP1]             = 0x00000800,
+    [AST2700_HW_STRAP1_CLR]         = 0xFFF0FFF0,
+    [AST2700_HW_STRAP1_LOCK]        = 0x00000FFF,
+    [AST2700_HW_STRAP1_SEC1]        = 0x000000FF,
+    [AST2700_HW_STRAP1_SEC2]        = 0x00000000,
+    [AST2700_HW_STRAP1_SEC3]        = 0x1000408F,
+    [AST2700_SCU_HPLL_PARAM]        = 0x0000009f,
+    [AST2700_SCU_HPLL_EXT_PARAM]    = 0x8000004f,
+    [AST2700_SCU_DPLL_PARAM]        = 0x0080009f,
+    [AST2700_SCU_DPLL_EXT_PARAM]    = 0x8000004f,
+    [AST2700_SCU_MPLL_PARAM]        = 0x00000040,
+    [AST2700_SCU_MPLL_EXT_PARAM]    = 0x80000000,
+    [AST2700_SCU_D1CLK_PARAM]       = 0x00050002,
+    [AST2700_SCU_D2CLK_PARAM]       = 0x00050002,
+    [AST2700_SCU_CRT1CLK_PARAM]     = 0x00050002,
+    [AST2700_SCU_CRT2CLK_PARAM]     = 0x00050002,
+    [AST2700_SCU_MPHYCLK_PARAM]     = 0x0000004c,
+    [AST2700_SCU_FREQ_CNTR]         = 0x000375eb,
+    [AST2700_SCU_CPU_SCRATCH_0]     = 0x00000000,
+    [AST2700_SCU_CPU_SCRATCH_1]     = 0x00000004,
+};
+
+static void aspeed_ast2700_scu_reset(DeviceState *dev)
+{
+    AspeedSCUState *s = ASPEED_SCU(dev);
+    AspeedSCUClass *asc = ASPEED_SCU_GET_CLASS(dev);
+
+    memcpy(s->regs, asc->resets, asc->nr_regs * 4);
+}
+
+static void aspeed_2700_scu_class_init(ObjectClass *klass, void *data)
+{
+    DeviceClass *dc = DEVICE_CLASS(klass);
+    AspeedSCUClass *asc = ASPEED_SCU_CLASS(klass);
+
+    dc->desc = "ASPEED 2700 System Control Unit";
+    dc->reset = aspeed_ast2700_scu_reset;
+    asc->resets = ast2700_a0_resets;
+    asc->calc_hpll = aspeed_2600_scu_calc_hpll;
+    asc->get_apb = aspeed_2700_scu_get_apb_freq;
+    asc->apb_divider = 4;
+    asc->nr_regs = ASPEED_AST2700_SCU_NR_REGS;
+    asc->clkin_25Mhz = true;
+    asc->ops = &aspeed_ast2700_scu_ops;
+}
+
+static uint64_t aspeed_ast2700_scuio_read(void *opaque, hwaddr offset,
+                                        unsigned size)
+{
+    AspeedSCUState *s = ASPEED_SCU(opaque);
+    int reg = TO_REG(offset);
+    if (reg >= ASPEED_AST2700_SCU_NR_REGS) {
+        qemu_log_mask(LOG_GUEST_ERROR,
+                      "%s: Out-of-bounds read at offset 0x%" HWADDR_PRIx "\n",
+                __func__, offset);
+        return 0;
+    }
+
+    switch (reg) {
+    default:
+        qemu_log_mask(LOG_GUEST_ERROR,
+                      "%s: Unhandled read at offset 0x%" HWADDR_PRIx "\n",
+                      __func__, offset);
+    }
+
+    trace_aspeed_ast2700_scuio_read(offset, size, s->regs[reg]);
+    return s->regs[reg];
+}
+
+static void aspeed_ast2700_scuio_write(void *opaque, hwaddr offset,
+                                     uint64_t data64, unsigned size)
+{
+    AspeedSCUState *s = ASPEED_SCU(opaque);
+    int reg = TO_REG(offset);
+    /* Truncate here so bitwise operations below behave as expected */
+    uint32_t data = data64;
+    bool updated = false;
+
+    if (reg >= ASPEED_AST2700_SCU_NR_REGS) {
+        qemu_log_mask(LOG_GUEST_ERROR,
+                      "%s: Out-of-bounds write at offset 0x%" HWADDR_PRIx "\n",
+                __func__, offset);
+        return;
+    }
+
+    trace_aspeed_ast2700_scuio_write(offset, size, data);
+
+    switch (reg) {
+    case AST2700_SCUIO_CLK_STOP_CTL_1:
+    case AST2700_SCUIO_CLK_STOP_CTL_2:
+        s->regs[reg] |= data;
+        updated = true;
+        break;
+    case AST2700_SCUIO_CLK_STOP_CLR_1:
+    case AST2700_SCUIO_CLK_STOP_CLR_2:
+        s->regs[reg - 1] ^= data;
+        updated = true;
+        break;
+    default:
+        qemu_log_mask(LOG_GUEST_ERROR,
+                      "%s: Unhandeled write at offset 0x%" HWADDR_PRIx "\n",
+                      __func__, offset);
+        break;
+    }
+
+    if (!updated) {
+        s->regs[reg] = data;
+    }
+}
+
+static const MemoryRegionOps aspeed_ast2700_scuio_ops = {
+    .read = aspeed_ast2700_scuio_read,
+    .write = aspeed_ast2700_scuio_write,
+    .endianness = DEVICE_LITTLE_ENDIAN,
+    .valid.min_access_size = 1,
+    .valid.max_access_size = 8,
+    .valid.unaligned = false,
+};
+
+static const uint32_t ast2700_a0_resets_io[ASPEED_AST2700_SCU_NR_REGS] = {
+    [AST2700_SILICON_REV]               = 0x06000003,
+    [AST2700_HW_STRAP1]                 = 0x00000504,
+    [AST2700_HW_STRAP1_CLR]             = 0xFFF0FFF0,
+    [AST2700_HW_STRAP1_LOCK]            = 0x00000FFF,
+    [AST2700_HW_STRAP1_SEC1]            = 0x000000FF,
+    [AST2700_HW_STRAP1_SEC2]            = 0x00000000,
+    [AST2700_HW_STRAP1_SEC3]            = 0x1000408F,
+    [AST2700_SCUIO_CLK_STOP_CTL_1]      = 0xffff8400,
+    [AST2700_SCUIO_CLK_STOP_CTL_2]      = 0x00005f30,
+    [AST2700_SCUIO_CLK_SEL_1]           = 0x86900000,
+    [AST2700_SCUIO_CLK_SEL_2]           = 0x00400000,
+    [AST2700_SCUIO_HPLL_PARAM]          = 0x10000027,
+    [AST2700_SCUIO_HPLL_EXT_PARAM]      = 0x80000014,
+    [AST2700_SCUIO_APLL_PARAM]          = 0x1000001f,
+    [AST2700_SCUIO_APLL_EXT_PARAM]      = 0x8000000f,
+    [AST2700_SCUIO_DPLL_PARAM]          = 0x106e42ce,
+    [AST2700_SCUIO_DPLL_EXT_PARAM]      = 0x80000167,
+    [AST2700_SCUIO_DPLL_PARAM_READ]     = 0x106e42ce,
+    [AST2700_SCUIO_DPLL_EXT_PARAM_READ] = 0x80000167,
+    [AST2700_SCUIO_UARTCLK_GEN]         = 0x00014506,
+    [AST2700_SCUIO_HUARTCLK_GEN]        = 0x000145c0,
+    [AST2700_SCUIO_CLK_DUTY_MEAS_RST]   = 0x0c9100d2,
+};
+
+static void aspeed_2700_scuio_class_init(ObjectClass *klass, void *data)
+{
+    DeviceClass *dc = DEVICE_CLASS(klass);
+    AspeedSCUClass *asc = ASPEED_SCU_CLASS(klass);
+
+    dc->desc = "ASPEED 2700 System Control Unit I/O";
+    dc->reset = aspeed_ast2700_scu_reset;
+    asc->resets = ast2700_a0_resets_io;
+    asc->calc_hpll = aspeed_2600_scu_calc_hpll;
+    asc->get_apb = aspeed_2700_scuio_get_apb_freq;
+    asc->apb_divider = 2;
+    asc->nr_regs = ASPEED_AST2700_SCU_NR_REGS;
+    asc->clkin_25Mhz = true;
+    asc->ops = &aspeed_ast2700_scuio_ops;
+}
+
+static const TypeInfo aspeed_2700_scu_info = {
+    .name = TYPE_ASPEED_2700_SCU,
+    .parent = TYPE_ASPEED_SCU,
+    .instance_size = sizeof(AspeedSCUState),
+    .class_init = aspeed_2700_scu_class_init,
+};
+
+static const TypeInfo aspeed_2700_scuio_info = {
+    .name = TYPE_ASPEED_2700_SCUIO,
+    .parent = TYPE_ASPEED_SCU,
+    .instance_size = sizeof(AspeedSCUState),
+    .class_init = aspeed_2700_scuio_class_init,
+};
+
 static const uint32_t ast1030_a1_resets[ASPEED_AST2600_SCU_NR_REGS] = {
     [AST2600_SYS_RST_CTRL]      = 0xFFC3FED8,
     [AST2600_SYS_RST_CTRL2]     = 0x09FFFFFC,
@@ -841,6 +1143,8 @@ static void aspeed_scu_register_types(void)
     type_register_static(&aspeed_2500_scu_info);
     type_register_static(&aspeed_2600_scu_info);
     type_register_static(&aspeed_1030_scu_info);
+    type_register_static(&aspeed_2700_scu_info);
+    type_register_static(&aspeed_2700_scuio_info);
 }
 
 type_init(aspeed_scu_register_types);
hw/misc/trace-events +4 -0
index e13b648221..1be0717c0c 100644
@@ -93,6 +93,10 @@ slavio_led_mem_readw(uint32_t ret) "Read diagnostic LED 0x%04x"
 # aspeed_scu.c
 aspeed_scu_write(uint64_t offset, unsigned size, uint32_t data) "To 0x%" PRIx64 " of size %u: 0x%" PRIx32
 aspeed_scu_read(uint64_t offset, unsigned size, uint32_t data) "To 0x%" PRIx64 " of size %u: 0x%" PRIx32
+aspeed_ast2700_scu_write(uint64_t offset, unsigned size, uint32_t data) "To 0x%" PRIx64 " of size %u: 0x%" PRIx32
+aspeed_ast2700_scu_read(uint64_t offset, unsigned size, uint32_t data) "To 0x%" PRIx64 " of size %u: 0x%" PRIx32
+aspeed_ast2700_scuio_write(uint64_t offset, unsigned size, uint32_t data) "To 0x%" PRIx64 " of size %u: 0x%" PRIx32
+aspeed_ast2700_scuio_read(uint64_t offset, unsigned size, uint32_t data) "To 0x%" PRIx64 " of size %u: 0x%" PRIx32
 
 # mps2-scc.c
 mps2_scc_read(uint64_t offset, uint64_t data, unsigned size) "MPS2 SCC read: offset 0x%" PRIx64 " data 0x%" PRIx64 " size %u"
include/hw/misc/aspeed_scu.h +42 -5

97 lines not on this page · raw message

Signature · 1 line
2.25.1
#17 lore raw

PATCH v5 14/17 aspeed: Add an AST2700 eval board

In reply to Jamin Lin via

AST2700 CPU is ARM Cortex-A35 which is 64 bits.
Add TARGET_AARCH64 to build this machine.

According to the design of ast2700, it has a bootmcu(riscv-32) which is used for executing SPL.
Then, CPUs(cortex-a35) execute u-boot, kernel and rofs.

Currently, qemu not support emulate two CPU architectures at the same machine. Therefore, qemu will only support to emulate CPU(cortex-a35) side for ast2700

---
 hw/arm/aspeed.c | 32 ++++++++++++++++++++++++++++++++
 1 file changed, 32 insertions(+)
hw/arm/aspeed.c +32 -0
index 93ca87fda2..40dc0e4c76 100644
@@ -178,6 +178,12 @@ struct AspeedMachineState {
 #define AST2600_EVB_HW_STRAP1 0x000000C0
 #define AST2600_EVB_HW_STRAP2 0x00000003
 
+#ifdef TARGET_AARCH64
+/* AST2700 evb hardware value */
+#define AST2700_EVB_HW_STRAP1 0x000000C0
+#define AST2700_EVB_HW_STRAP2 0x00000003
+#endif
+
 /* Tacoma hardware value */
 #define TACOMA_BMC_HW_STRAP1  0x00000000
 #define TACOMA_BMC_HW_STRAP2  0x00000040
@@ -1588,6 +1594,26 @@ static void aspeed_minibmc_machine_ast1030_evb_class_init(ObjectClass *oc,
     aspeed_machine_class_init_cpus_defaults(mc);
 }
 
+#ifdef TARGET_AARCH64
+static void aspeed_machine_ast2700_evb_class_init(ObjectClass *oc, void *data)
+{
+    MachineClass *mc = MACHINE_CLASS(oc);
+    AspeedMachineClass *amc = ASPEED_MACHINE_CLASS(oc);
+
+    mc->desc = "Aspeed AST2700 EVB (Cortex-A35)";
+    amc->soc_name  = "ast2700-a0";
+    amc->hw_strap1 = AST2700_EVB_HW_STRAP1;
+    amc->hw_strap2 = AST2700_EVB_HW_STRAP2;
+    amc->fmc_model = "w25q01jvq";
+    amc->spi_model = "w25q512jv";
+    amc->num_cs    = 2;
+    amc->macs_mask = ASPEED_MAC0_ON | ASPEED_MAC1_ON | ASPEED_MAC2_ON;
+    amc->uart_default = ASPEED_DEV_UART12;
+    mc->default_ram_size = 1 * GiB;
+    aspeed_machine_class_init_cpus_defaults(mc);
+}
+#endif
+
 static void aspeed_machine_qcom_dc_scm_v1_class_init(ObjectClass *oc,
                                                      void *data)
 {
@@ -1711,6 +1737,12 @@ static const TypeInfo aspeed_machine_types[] = {
         .name           = MACHINE_TYPE_NAME("ast1030-evb"),
         .parent         = TYPE_ASPEED_MACHINE,
         .class_init     = aspeed_minibmc_machine_ast1030_evb_class_init,
+#ifdef TARGET_AARCH64
+    }, {
+        .name          = MACHINE_TYPE_NAME("ast2700-evb"),
+        .parent        = TYPE_ASPEED_MACHINE,
+        .class_init    = aspeed_machine_ast2700_evb_class_init,
+#endif
     }, {
         .name          = TYPE_ASPEED_MACHINE,
         .parent        = TYPE_MACHINE,
Signature · 1 line
2.25.1
#18 lore raw

PATCH v5 15/17 aspeed/soc: fix incorrect dram size for AST2700

In reply to Jamin Lin via

AST2700 dram size calculation is not back compatible AST2600. According to the DDR capacity hardware behavior,
if users write the data to the address which is beyond the ram size, it would write the data to the "address % ram_size".
For example:
a. sdram base address "0x4 00000000"
b. sdram size 1 GiB
The available address range is from "0x4 00000000" to "0x4 3FFFFFFF". If users write 0x12345678 to address "0x5 00000000",
the value of DRAM address 0 (base address 0x4 00000000) will be 0x12345678.

Add aspeed_soc_ast2700_dram_init to calculate the dram size and add memory I/O whose address range is from "max_ram_size - ram_size" to max_ram_size and its read/write handler to emulate DDR capacity hardware behavior.

---
 hw/arm/aspeed_ast27x0.c     | 87 ++++++++++++++++++++++++++++++++++++-
 include/hw/arm/aspeed_soc.h |  2 +
 2 files changed, 88 insertions(+), 1 deletion(-)
hw/arm/aspeed_ast27x0.c +86 -1
index 29e75072c4..b6876b4862 100644
@@ -20,6 +20,7 @@
 #include "sysemu/sysemu.h"
 #include "hw/intc/arm_gicv3.h"
 #include "qapi/qmp/qlist.h"
+#include "qemu/log.h"
 
 static const hwaddr aspeed_soc_ast2700_memmap[] = {
     [ASPEED_DEV_SPI_BOOT]  =  0x400000000,
@@ -191,6 +192,90 @@ static qemu_irq aspeed_soc_ast2700_get_irq(AspeedSoCState *s, int dev)
     return qdev_get_gpio_in(DEVICE(&a->gic), sc->irqmap[dev]);
 }
 
+static uint64_t aspeed_ram_capacity_read(void *opaque, hwaddr addr,
+                                                    unsigned int size)
+{
+    qemu_log_mask(LOG_GUEST_ERROR,
+                  "%s: DRAM read out of ram size, addr:0x%" PRIx64 "\n",
+                   __func__, addr);
+    return 0;
+}
+
+static void aspeed_ram_capacity_write(void *opaque, hwaddr addr, uint64_t data,
+                                                unsigned int size)
+{
+    AspeedSoCState *s = ASPEED_SOC(opaque);
+    ram_addr_t ram_size;
+    MemTxResult result;
+
+    ram_size = object_property_get_uint(OBJECT(&s->sdmc), "ram-size",
+                                        &error_abort);
+
+    /*
+     * Emulate ddr capacity hardware behavior.
+     * If writes the data to the address which is beyond the ram size,
+     * it would write the data to the "address % ram_size".
+     */
+    result = address_space_write(&s->dram_as, addr % ram_size,
+                                 MEMTXATTRS_UNSPECIFIED, &data, 4);
+    if (result != MEMTX_OK) {
+        qemu_log_mask(LOG_GUEST_ERROR,
+                      "%s: DRAM write failed, addr:0x%" HWADDR_PRIx
+                      ", data :0x%" PRIx64  "\n",
+                      __func__, addr % ram_size, data);
+    }
+}
+
+static const MemoryRegionOps aspeed_ram_capacity_ops = {
+    .read = aspeed_ram_capacity_read,
+    .write = aspeed_ram_capacity_write,
+    .endianness = DEVICE_LITTLE_ENDIAN,
+    .valid = {
+        .min_access_size = 1,
+        .max_access_size = 8,
+    },
+};
+
+/*
+ * SDMC should be realized first to get correct RAM size and max size
+ * values
+ */
+static bool aspeed_soc_ast2700_dram_init(DeviceState *dev, Error **errp)
+{
+    ram_addr_t ram_size, max_ram_size;
+    Aspeed27x0SoCState *a = ASPEED27X0_SOC(dev);
+    AspeedSoCState *s = ASPEED_SOC(dev);
+    AspeedSoCClass *sc = ASPEED_SOC_GET_CLASS(s);
+
+    ram_size = object_property_get_uint(OBJECT(&s->sdmc), "ram-size",
+                                        &error_abort);
+    max_ram_size = object_property_get_uint(OBJECT(&s->sdmc), "max-ram-size",
+                                            &error_abort);
+
+    memory_region_init(&s->dram_container, OBJECT(s), "ram-container",
+                       ram_size);
+    memory_region_add_subregion(&s->dram_container, 0, s->dram_mr);
+    address_space_init(&s->dram_as, s->dram_mr, "dram");
+
+    /*
+     * Add a memory region beyond the RAM region to emulate
+     * ddr capacity hardware behavior.
+     */
+    if (ram_size < max_ram_size) {
+        memory_region_init_io(&a->dram_empty, OBJECT(s),
+                              &aspeed_ram_capacity_ops, s,
+                              "ram-empty", max_ram_size - ram_size);
+
+        memory_region_add_subregion(s->memory,
+                                    sc->memmap[ASPEED_DEV_SDRAM] + ram_size,
+                                    &a->dram_empty);
+    }
+
+    memory_region_add_subregion(s->memory,
+                      sc->memmap[ASPEED_DEV_SDRAM], &s->dram_container);
+    return true;
+}
+
 static void aspeed_soc_ast2700_init(Object *obj)
 {
     Aspeed27x0SoCState *a = ASPEED27X0_SOC(obj);
@@ -461,7 +546,7 @@ static void aspeed_soc_ast2700_realize(DeviceState *dev, Error **errp)
                     sc->memmap[ASPEED_DEV_SDMC]);
 
     /* RAM */
-    if (!aspeed_soc_dram_init(s, errp)) {
+    if (!aspeed_soc_ast2700_dram_init(dev, errp)) {
         return;
     }
 
include/hw/arm/aspeed_soc.h +2 -0
index caef0d100b..849ba37f95 100644
@@ -59,6 +59,7 @@ struct AspeedSoCState {
     MemoryRegion sram;
     MemoryRegion spi_boot_container;
     MemoryRegion spi_boot;
+    AddressSpace dram_as;
     AspeedRtcState rtc;
     AspeedTimerCtrlState timerctrl;
     AspeedI2CState i2c;
@@ -129,6 +130,7 @@ struct Aspeed27x0SoCState {
     ARMCPU cpu[ASPEED_CPUS_NUM];
     AspeedINTCState intc;
     GICv3State gic;
+    MemoryRegion dram_empty;
 };
 
 #define TYPE_ASPEED27X0_SOC "aspeed27x0-soc"
Signature · 1 line
2.25.1
Reviewed-by on v5 15/17
#19 lore raw

Re: [PATCH v5 15/17] aspeed/soc: fix incorrect dram size for AST2700

Quoted 11 lines · Jamin Lin

AST2700 dram size calculation is not back compatible AST2600. According to the DDR capacity hardware behavior,
if users write the data to the address which is beyond the ram size, it would write the data to the "address % ram_size".
For example:
a. sdram base address "0x4 00000000"
b. sdram size 1 GiB
The available address range is from "0x4 00000000" to "0x4 3FFFFFFF". If users write 0x12345678 to address "0x5 00000000",
the value of DRAM address 0 (base address 0x4 00000000) will be 0x12345678.

Quoted 6 lines

Add aspeed_soc_ast2700_dram_init to calculate the dram size and add memory I/O whose address range is from "max_ram_size - ram_size" to max_ram_size and its read/write handler to emulate DDR capacity hardware behavior.

Thanks,

C.

Quoted 137 lines
---
  hw/arm/aspeed_ast27x0.c     | 87 ++++++++++++++++++++++++++++++++++++-
  include/hw/arm/aspeed_soc.h |  2 +
  2 files changed, 88 insertions(+), 1 deletion(-)
hw/arm/aspeed_ast27x0.c +86 -1
index 29e75072c4..b6876b4862 100644
@@ -20,6 +20,7 @@
  #include "sysemu/sysemu.h"
  #include "hw/intc/arm_gicv3.h"
  #include "qapi/qmp/qlist.h"
+#include "qemu/log.h"
 
  static const hwaddr aspeed_soc_ast2700_memmap[] = {
      [ASPEED_DEV_SPI_BOOT]  =  0x400000000,
@@ -191,6 +192,90 @@ static qemu_irq aspeed_soc_ast2700_get_irq(AspeedSoCState *s, int dev)
      return qdev_get_gpio_in(DEVICE(&a->gic), sc->irqmap[dev]);
  }
 
+static uint64_t aspeed_ram_capacity_read(void *opaque, hwaddr addr,
+                                                    unsigned int size)
+{
+    qemu_log_mask(LOG_GUEST_ERROR,
+                  "%s: DRAM read out of ram size, addr:0x%" PRIx64 "\n",
+                   __func__, addr);
+    return 0;
+}
+
+static void aspeed_ram_capacity_write(void *opaque, hwaddr addr, uint64_t data,
+                                                unsigned int size)
+{
+    AspeedSoCState *s = ASPEED_SOC(opaque);
+    ram_addr_t ram_size;
+    MemTxResult result;
+
+    ram_size = object_property_get_uint(OBJECT(&s->sdmc), "ram-size",
+                                        &error_abort);
+
+    /*
+     * Emulate ddr capacity hardware behavior.
+     * If writes the data to the address which is beyond the ram size,
+     * it would write the data to the "address % ram_size".
+     */
+    result = address_space_write(&s->dram_as, addr % ram_size,
+                                 MEMTXATTRS_UNSPECIFIED, &data, 4);
+    if (result != MEMTX_OK) {
+        qemu_log_mask(LOG_GUEST_ERROR,
+                      "%s: DRAM write failed, addr:0x%" HWADDR_PRIx
+                      ", data :0x%" PRIx64  "\n",
+                      __func__, addr % ram_size, data);
+    }
+}
+
+static const MemoryRegionOps aspeed_ram_capacity_ops = {
+    .read = aspeed_ram_capacity_read,
+    .write = aspeed_ram_capacity_write,
+    .endianness = DEVICE_LITTLE_ENDIAN,
+    .valid = {
+        .min_access_size = 1,
+        .max_access_size = 8,
+    },
+};
+
+/*
+ * SDMC should be realized first to get correct RAM size and max size
+ * values
+ */
+static bool aspeed_soc_ast2700_dram_init(DeviceState *dev, Error **errp)
+{
+    ram_addr_t ram_size, max_ram_size;
+    Aspeed27x0SoCState *a = ASPEED27X0_SOC(dev);
+    AspeedSoCState *s = ASPEED_SOC(dev);
+    AspeedSoCClass *sc = ASPEED_SOC_GET_CLASS(s);
+
+    ram_size = object_property_get_uint(OBJECT(&s->sdmc), "ram-size",
+                                        &error_abort);
+    max_ram_size = object_property_get_uint(OBJECT(&s->sdmc), "max-ram-size",
+                                            &error_abort);
+
+    memory_region_init(&s->dram_container, OBJECT(s), "ram-container",
+                       ram_size);
+    memory_region_add_subregion(&s->dram_container, 0, s->dram_mr);
+    address_space_init(&s->dram_as, s->dram_mr, "dram");
+
+    /*
+     * Add a memory region beyond the RAM region to emulate
+     * ddr capacity hardware behavior.
+     */
+    if (ram_size < max_ram_size) {
+        memory_region_init_io(&a->dram_empty, OBJECT(s),
+                              &aspeed_ram_capacity_ops, s,
+                              "ram-empty", max_ram_size - ram_size);
+
+        memory_region_add_subregion(s->memory,
+                                    sc->memmap[ASPEED_DEV_SDRAM] + ram_size,
+                                    &a->dram_empty);
+    }
+
+    memory_region_add_subregion(s->memory,
+                      sc->memmap[ASPEED_DEV_SDRAM], &s->dram_container);
+    return true;
+}
+
  static void aspeed_soc_ast2700_init(Object *obj)
  {
      Aspeed27x0SoCState *a = ASPEED27X0_SOC(obj);
@@ -461,7 +546,7 @@ static void aspeed_soc_ast2700_realize(DeviceState *dev, Error **errp)
                      sc->memmap[ASPEED_DEV_SDMC]);
 
      /* RAM */
-    if (!aspeed_soc_dram_init(s, errp)) {
+    if (!aspeed_soc_ast2700_dram_init(dev, errp)) {
          return;
      }
 
include/hw/arm/aspeed_soc.h +2 -0
index caef0d100b..849ba37f95 100644
@@ -59,6 +59,7 @@ struct AspeedSoCState {
      MemoryRegion sram;
      MemoryRegion spi_boot_container;
      MemoryRegion spi_boot;
+    AddressSpace dram_as;
      AspeedRtcState rtc;
      AspeedTimerCtrlState timerctrl;
      AspeedI2CState i2c;
@@ -129,6 +130,7 @@ struct Aspeed27x0SoCState {
      ARMCPU cpu[ASPEED_CPUS_NUM];
      AspeedINTCState intc;
      GICv3State gic;
+    MemoryRegion dram_empty;
  };
 
  #define TYPE_ASPEED27X0_SOC "aspeed27x0-soc"
#20 lore raw

PATCH v5 13/17 aspeed/soc: Add AST2700 support

In reply to Jamin Lin via

Initial definitions for a simple machine using an AST2700 SOC (Cortex-a35 CPU).

AST2700 SOC and its interrupt controller are too complex to handle in the common Aspeed SoC framework. We introduce a new ast2700 class with instance_init and realize handlers.

AST2700 is a 64 bits quad core cpus and support 8 watchdog. Update maximum ASPEED_CPUS_NUM to 4 and ASPEED_WDTS_NUM to 8. In addition, update AspeedSocState to support scuio, sli, sliio and intc.

Add TYPE_ASPEED27X0_SOC machine type.

The SDMC controller is unlocked at SPL stage.
At present, only supports to emulate booting
start from u-boot stage. Set SDMC controller
unlocked by default.

In INTC, each interrupt of INT 128 to INT 136 combines 32 interrupts. It connect GICINT IRQ GPIO-OUTPUT pins to GIC device with irq 128 to 136. And, if a device irq is 128 to 136, its irq GPIO-OUTPUT pin is connected to GICINT or-gates instead of GIC device.

---
 hw/arm/aspeed_ast27x0.c     | 563 ++++++++++++++++++++++++++++++++++++
 hw/arm/meson.build          |   1 +
 include/hw/arm/aspeed_soc.h |  28 +-
 3 files changed, 590 insertions(+), 2 deletions(-)
 create mode 100644 hw/arm/aspeed_ast27x0.c
hw/arm/aspeed_ast27x0.c new file +563 -0
new file mode 100644
index 0000000000..29e75072c4
@@ -0,0 +1,563 @@
+/*
+ * ASPEED SoC 27x0 family
+ *
+ * Copyright (C) 2024 ASPEED Technology Inc.
+ *
+ * This code is licensed under the GPL version 2 or later.  See
+ * the COPYING file in the top-level directory.
+ *
+ * Implementation extracted from the AST2600 and adapted for AST27x0.
+ */
+
+#include "qemu/osdep.h"
+#include "qapi/error.h"
+#include "hw/misc/unimp.h"
+#include "hw/arm/aspeed_soc.h"
+#include "qemu/module.h"
+#include "qemu/error-report.h"
+#include "hw/i2c/aspeed_i2c.h"
+#include "net/net.h"
+#include "sysemu/sysemu.h"
+#include "hw/intc/arm_gicv3.h"
+#include "qapi/qmp/qlist.h"
+
+static const hwaddr aspeed_soc_ast2700_memmap[] = {
+    [ASPEED_DEV_SPI_BOOT]  =  0x400000000,
+    [ASPEED_DEV_SRAM]      =  0x10000000,
+    [ASPEED_DEV_SDMC]      =  0x12C00000,
+    [ASPEED_DEV_SCU]       =  0x12C02000,
+    [ASPEED_DEV_SCUIO]     =  0x14C02000,
+    [ASPEED_DEV_UART0]     =  0X14C33000,
+    [ASPEED_DEV_UART1]     =  0X14C33100,
+    [ASPEED_DEV_UART2]     =  0X14C33200,
+    [ASPEED_DEV_UART3]     =  0X14C33300,
+    [ASPEED_DEV_UART4]     =  0X12C1A000,
+    [ASPEED_DEV_UART5]     =  0X14C33400,
+    [ASPEED_DEV_UART6]     =  0X14C33500,
+    [ASPEED_DEV_UART7]     =  0X14C33600,
+    [ASPEED_DEV_UART8]     =  0X14C33700,
+    [ASPEED_DEV_UART9]     =  0X14C33800,
+    [ASPEED_DEV_UART10]    =  0X14C33900,
+    [ASPEED_DEV_UART11]    =  0X14C33A00,
+    [ASPEED_DEV_UART12]    =  0X14C33B00,
+    [ASPEED_DEV_WDT]       =  0x14C37000,
+    [ASPEED_DEV_VUART]     =  0X14C30000,
+    [ASPEED_DEV_FMC]       =  0x14000000,
+    [ASPEED_DEV_SPI0]      =  0x14010000,
+    [ASPEED_DEV_SPI1]      =  0x14020000,
+    [ASPEED_DEV_SPI2]      =  0x14030000,
+    [ASPEED_DEV_SDRAM]     =  0x400000000,
+    [ASPEED_DEV_MII1]      =  0x14040000,
+    [ASPEED_DEV_MII2]      =  0x14040008,
+    [ASPEED_DEV_MII3]      =  0x14040010,
+    [ASPEED_DEV_ETH1]      =  0x14050000,
+    [ASPEED_DEV_ETH2]      =  0x14060000,
+    [ASPEED_DEV_ETH3]      =  0x14070000,
+    [ASPEED_DEV_EMMC]      =  0x12090000,
+    [ASPEED_DEV_INTC]      =  0x12100000,
+    [ASPEED_DEV_SLI]       =  0x12C17000,
+    [ASPEED_DEV_SLIIO]     =  0x14C1E000,
+    [ASPEED_GIC_DIST]      =  0x12200000,
+    [ASPEED_GIC_REDIST]    =  0x12280000,
+};
+
+#define AST2700_MAX_IRQ 288
+
+/* Shared Peripheral Interrupt values below are offset by -32 from datasheet */
+static const int aspeed_soc_ast2700_irqmap[] = {
+    [ASPEED_DEV_UART0]     = 132,
+    [ASPEED_DEV_UART1]     = 132,
+    [ASPEED_DEV_UART2]     = 132,
+    [ASPEED_DEV_UART3]     = 132,
+    [ASPEED_DEV_UART4]     = 8,
+    [ASPEED_DEV_UART5]     = 132,
+    [ASPEED_DEV_UART6]     = 132,
+    [ASPEED_DEV_UART7]     = 132,
+    [ASPEED_DEV_UART8]     = 132,
+    [ASPEED_DEV_UART9]     = 132,
+    [ASPEED_DEV_UART10]    = 132,
+    [ASPEED_DEV_UART11]    = 132,
+    [ASPEED_DEV_UART12]    = 132,
+    [ASPEED_DEV_FMC]       = 131,
+    [ASPEED_DEV_SDMC]      = 0,
+    [ASPEED_DEV_SCU]       = 12,
+    [ASPEED_DEV_ADC]       = 130,
+    [ASPEED_DEV_XDMA]      = 5,
+    [ASPEED_DEV_EMMC]      = 15,
+    [ASPEED_DEV_GPIO]      = 11,
+    [ASPEED_DEV_GPIO_1_8V] = 130,
+    [ASPEED_DEV_RTC]       = 13,
+    [ASPEED_DEV_TIMER1]    = 16,
+    [ASPEED_DEV_TIMER2]    = 17,
+    [ASPEED_DEV_TIMER3]    = 18,
+    [ASPEED_DEV_TIMER4]    = 19,
+    [ASPEED_DEV_TIMER5]    = 20,
+    [ASPEED_DEV_TIMER6]    = 21,
+    [ASPEED_DEV_TIMER7]    = 22,
+    [ASPEED_DEV_TIMER8]    = 23,
+    [ASPEED_DEV_WDT]       = 131,
+    [ASPEED_DEV_PWM]       = 131,
+    [ASPEED_DEV_LPC]       = 128,
+    [ASPEED_DEV_IBT]       = 128,
+    [ASPEED_DEV_I2C]       = 130,
+    [ASPEED_DEV_PECI]      = 133,
+    [ASPEED_DEV_ETH1]      = 132,
+    [ASPEED_DEV_ETH2]      = 132,
+    [ASPEED_DEV_ETH3]      = 132,
+    [ASPEED_DEV_HACE]      = 4,
+    [ASPEED_DEV_KCS]       = 128,
+    [ASPEED_DEV_DP]        = 28,
+    [ASPEED_DEV_I3C]       = 131,
+};
+
+/* GICINT 128 */
+static const int aspeed_soc_ast2700_gic128_intcmap[] = {
+    [ASPEED_DEV_LPC]       = 0,
+    [ASPEED_DEV_IBT]       = 2,
+    [ASPEED_DEV_KCS]       = 4,
+};
+
+/* GICINT 130 */
+static const int aspeed_soc_ast2700_gic130_intcmap[] = {
+    [ASPEED_DEV_I2C]        = 0,
+    [ASPEED_DEV_ADC]        = 16,
+    [ASPEED_DEV_GPIO_1_8V]  = 18,
+};
+
+/* GICINT 131 */
+static const int aspeed_soc_ast2700_gic131_intcmap[] = {
+    [ASPEED_DEV_I3C]       = 0,
+    [ASPEED_DEV_WDT]       = 16,
+    [ASPEED_DEV_FMC]       = 25,
+    [ASPEED_DEV_PWM]       = 29,
+};
+
+/* GICINT 132 */
+static const int aspeed_soc_ast2700_gic132_intcmap[] = {
+    [ASPEED_DEV_ETH1]      = 0,
+    [ASPEED_DEV_ETH2]      = 1,
+    [ASPEED_DEV_ETH3]      = 2,
+    [ASPEED_DEV_UART0]     = 7,
+    [ASPEED_DEV_UART1]     = 8,
+    [ASPEED_DEV_UART2]     = 9,
+    [ASPEED_DEV_UART3]     = 10,
+    [ASPEED_DEV_UART5]     = 11,
+    [ASPEED_DEV_UART6]     = 12,
+    [ASPEED_DEV_UART7]     = 13,
+    [ASPEED_DEV_UART8]     = 14,
+    [ASPEED_DEV_UART9]     = 15,
+    [ASPEED_DEV_UART10]    = 16,
+    [ASPEED_DEV_UART11]    = 17,
+    [ASPEED_DEV_UART12]    = 18,
+};
+
+/* GICINT 133 */
+static const int aspeed_soc_ast2700_gic133_intcmap[] = {
+    [ASPEED_DEV_PECI]      = 4,
+};
+
+/* GICINT 128 ~ 136 */
+struct gic_intc_irq_info {
+    int irq;
+    const int *ptr;
+};
+
+static const struct gic_intc_irq_info aspeed_soc_ast2700_gic_intcmap[] = {
+    {128,  aspeed_soc_ast2700_gic128_intcmap},
+    {129,  NULL},
+    {130,  aspeed_soc_ast2700_gic130_intcmap},
+    {131,  aspeed_soc_ast2700_gic131_intcmap},
+    {132,  aspeed_soc_ast2700_gic132_intcmap},
+    {133,  aspeed_soc_ast2700_gic133_intcmap},
+    {134,  NULL},
+    {135,  NULL},
+    {136,  NULL},
+};
+
+static qemu_irq aspeed_soc_ast2700_get_irq(AspeedSoCState *s, int dev)
+{
+    Aspeed27x0SoCState *a = ASPEED27X0_SOC(s);
+    AspeedSoCClass *sc = ASPEED_SOC_GET_CLASS(s);
+    int i;
+
+    for (i = 0; i < ARRAY_SIZE(aspeed_soc_ast2700_gic_intcmap); i++) {
+        if (sc->irqmap[dev] == aspeed_soc_ast2700_gic_intcmap[i].irq) {
+            assert(aspeed_soc_ast2700_gic_intcmap[i].ptr);
+            return qdev_get_gpio_in(DEVICE(&a->intc.orgates[i]),
+                aspeed_soc_ast2700_gic_intcmap[i].ptr[dev]);
+        }
+    }
+
+    return qdev_get_gpio_in(DEVICE(&a->gic), sc->irqmap[dev]);
+}
+
+static void aspeed_soc_ast2700_init(Object *obj)
+{
+    Aspeed27x0SoCState *a = ASPEED27X0_SOC(obj);
+    AspeedSoCState *s = ASPEED_SOC(obj);
+    AspeedSoCClass *sc = ASPEED_SOC_GET_CLASS(s);
+    int i;
+    char socname[8];
+    char typename[64];
+
+    if (sscanf(sc->name, "%7s", socname) != 1) {
+        g_assert_not_reached();
+    }
+
+    for (i = 0; i < sc->num_cpus; i++) {
+        object_initialize_child(obj, "cpu[*]", &a->cpu[i],
+                                aspeed_soc_cpu_type(sc));
+    }
+
+    object_initialize_child(obj, "gic", &a->gic, gicv3_class_name());
+
+    object_initialize_child(obj, "scu", &s->scu, TYPE_ASPEED_2700_SCU);
+    qdev_prop_set_uint32(DEVICE(&s->scu), "silicon-rev",
+                         sc->silicon_rev);
+    object_property_add_alias(obj, "hw-strap1", OBJECT(&s->scu),
+                              "hw-strap1");
+    object_property_add_alias(obj, "hw-strap2", OBJECT(&s->scu),
+                              "hw-strap2");
+    object_property_add_alias(obj, "hw-prot-key", OBJECT(&s->scu),
+                              "hw-prot-key");
+
+    object_initialize_child(obj, "scuio", &s->scuio, TYPE_ASPEED_2700_SCUIO);
+    qdev_prop_set_uint32(DEVICE(&s->scuio), "silicon-rev",
+                         sc->silicon_rev);
+
+    snprintf(typename, sizeof(typename), "aspeed.fmc-%s", socname);
+    object_initialize_child(obj, "fmc", &s->fmc, typename);
+
+    for (i = 0; i < sc->spis_num; i++) {
+        snprintf(typename, sizeof(typename), "aspeed.spi%d-%s", i, socname);
+        object_initialize_child(obj, "spi[*]", &s->spi[i], typename);
+    }
+
+    snprintf(typename, sizeof(typename), "aspeed.sdmc-%s", socname);
+    object_initialize_child(obj, "sdmc", &s->sdmc, typename);
+    object_property_add_alias(obj, "ram-size", OBJECT(&s->sdmc),
+                              "ram-size");
+
+    for (i = 0; i < sc->wdts_num; i++) {
+        snprintf(typename, sizeof(typename), "aspeed.wdt-%s", socname);
+        object_initialize_child(obj, "wdt[*]", &s->wdt[i], typename);
+    }
+
+    for (i = 0; i < sc->macs_num; i++) {
+        object_initialize_child(obj, "ftgmac100[*]", &s->ftgmac100[i],
+                                TYPE_FTGMAC100);
+
+        object_initialize_child(obj, "mii[*]", &s->mii[i], TYPE_ASPEED_MII);
+    }
+
+    for (i = 0; i < sc->uarts_num; i++) {
+        object_initialize_child(obj, "uart[*]", &s->uart[i], TYPE_SERIAL_MM);
+    }
+
+    object_initialize_child(obj, "sli", &s->sli, TYPE_ASPEED_2700_SLI);
+    object_initialize_child(obj, "sliio", &s->sliio, TYPE_ASPEED_2700_SLIIO);
+    object_initialize_child(obj, "intc", &a->intc, TYPE_ASPEED_2700_INTC);
+}
+
+/*
+ * ASPEED ast2700 has 0x0 as cluster ID
+ *
+ * https://developer.arm.com/documentation/100236/0100/register-descriptions/aarch64-system-registers/multiprocessor-affinity-register--el1
+ */
+static uint64_t aspeed_calc_affinity(int cpu)
+{
+    return (0x0 << ARM_AFF1_SHIFT) | cpu;
+}
+
+static bool aspeed_soc_ast2700_gic_realize(DeviceState *dev, Error **errp)
+{
+    Aspeed27x0SoCState *a = ASPEED27X0_SOC(dev);
+    AspeedSoCState *s = ASPEED_SOC(dev);
+    AspeedSoCClass *sc = ASPEED_SOC_GET_CLASS(s);
+    SysBusDevice *gicbusdev;
+    DeviceState *gicdev;
+    QList *redist_region_count;
+    int i;
+
+    gicbusdev = SYS_BUS_DEVICE(&a->gic);
+    gicdev = DEVICE(&a->gic);
+    qdev_prop_set_uint32(gicdev, "revision", 3);
+    qdev_prop_set_uint32(gicdev, "num-cpu", sc->num_cpus);
+    qdev_prop_set_uint32(gicdev, "num-irq", AST2700_MAX_IRQ);
+
+    redist_region_count = qlist_new();
+    qlist_append_int(redist_region_count, sc->num_cpus);
+    qdev_prop_set_array(gicdev, "redist-region-count", redist_region_count);
+
+    if (!sysbus_realize(gicbusdev, errp)) {
+        return false;
+    }
+    sysbus_mmio_map(gicbusdev, 0, sc->memmap[ASPEED_GIC_DIST]);
+    sysbus_mmio_map(gicbusdev, 1, sc->memmap[ASPEED_GIC_REDIST]);
+
+    for (i = 0; i < sc->num_cpus; i++) {
+        DeviceState *cpudev = DEVICE(&a->cpu[i]);
+        int NUM_IRQS = 256, ARCH_GIC_MAINT_IRQ = 9, VIRTUAL_PMU_IRQ = 7;
+        int ppibase = NUM_IRQS + i * GIC_INTERNAL + GIC_NR_SGIS;
+
+        const int timer_irq[] = {
+            [GTIMER_PHYS] = 14,
+            [GTIMER_VIRT] = 11,
+            [GTIMER_HYP]  = 10,
+            [GTIMER_SEC]  = 13,
+        };
+        int j;
+
+        for (j = 0; j < ARRAY_SIZE(timer_irq); j++) {
+            qdev_connect_gpio_out(cpudev, j,
+                    qdev_get_gpio_in(gicdev, ppibase + timer_irq[j]));
+        }
+
+        qemu_irq irq = qdev_get_gpio_in(gicdev,
+                                        ppibase + ARCH_GIC_MAINT_IRQ);
+        qdev_connect_gpio_out_named(cpudev, "gicv3-maintenance-interrupt",
+                                    0, irq);
+        qdev_connect_gpio_out_named(cpudev, "pmu-interrupt", 0,
+                qdev_get_gpio_in(gicdev, ppibase + VIRTUAL_PMU_IRQ));
+
+        sysbus_connect_irq(gicbusdev, i, qdev_get_gpio_in(cpudev, ARM_CPU_IRQ));
+        sysbus_connect_irq(gicbusdev, i + sc->num_cpus,
+                           qdev_get_gpio_in(cpudev, ARM_CPU_FIQ));
+        sysbus_connect_irq(gicbusdev, i + 2 * sc->num_cpus,
+                           qdev_get_gpio_in(cpudev, ARM_CPU_VIRQ));
+        sysbus_connect_irq(gicbusdev, i + 3 * sc->num_cpus,
+                           qdev_get_gpio_in(cpudev, ARM_CPU_VFIQ));
+    }
+
+    return true;
+}
+
+static void aspeed_soc_ast2700_realize(DeviceState *dev, Error **errp)
+{
+    int i;
+    Aspeed27x0SoCState *a = ASPEED27X0_SOC(dev);
+    AspeedSoCState *s = ASPEED_SOC(dev);
+    AspeedSoCClass *sc = ASPEED_SOC_GET_CLASS(s);
+    AspeedINTCClass *ic = ASPEED_INTC_GET_CLASS(&a->intc);
+    g_autofree char *sram_name = NULL;
+
+    /* Default boot region (SPI memory or ROMs) */
+    memory_region_init(&s->spi_boot_container, OBJECT(s),
+                       "aspeed.spi_boot_container", 0x400000000);
+    memory_region_add_subregion(s->memory, sc->memmap[ASPEED_DEV_SPI_BOOT],
+                                &s->spi_boot_container);
+
+    /* CPU */
+    for (i = 0; i < sc->num_cpus; i++) {
+        object_property_set_int(OBJECT(&a->cpu[i]), "mp-affinity",
+                                aspeed_calc_affinity(i), &error_abort);
+
+        object_property_set_int(OBJECT(&a->cpu[i]), "cntfrq", 1125000000,
+                                &error_abort);
+        object_property_set_link(OBJECT(&a->cpu[i]), "memory",
+                                 OBJECT(s->memory), &error_abort);
+
+        if (!qdev_realize(DEVICE(&a->cpu[i]), NULL, errp)) {
+            return;
+        }
+    }
+
+    /* GIC */
+    if (!aspeed_soc_ast2700_gic_realize(dev, errp)) {
+        return;
+    }
+
+    /* INTC */
+    if (!sysbus_realize(SYS_BUS_DEVICE(&a->intc), errp)) {
+        return;
+    }
+
+    aspeed_mmio_map(s, SYS_BUS_DEVICE(&a->intc), 0,
+                    sc->memmap[ASPEED_DEV_INTC]);
+
+    /* GICINT orgates -> INTC -> GIC */
+    for (i = 0; i < ic->num_ints; i++) {
+        qdev_connect_gpio_out(DEVICE(&a->intc.orgates[i]), 0,
+                                qdev_get_gpio_in(DEVICE(&a->intc), i));
+        sysbus_connect_irq(SYS_BUS_DEVICE(&a->intc), i,
+                           qdev_get_gpio_in(DEVICE(&a->gic),
+                                aspeed_soc_ast2700_gic_intcmap[i].irq));
+    }
+
+    /* SRAM */
+    sram_name = g_strdup_printf("aspeed.sram.%d", CPU(&a->cpu[0])->cpu_index);
+    if (!memory_region_init_ram(&s->sram, OBJECT(s), sram_name, sc->sram_size,
+                                 errp)) {
+        return;
+    }
+    memory_region_add_subregion(s->memory,
+                                sc->memmap[ASPEED_DEV_SRAM], &s->sram);
+
+    /* SCU */
+    if (!sysbus_realize(SYS_BUS_DEVICE(&s->scu), errp)) {
+        return;
+    }
+    aspeed_mmio_map(s, SYS_BUS_DEVICE(&s->scu), 0, sc->memmap[ASPEED_DEV_SCU]);
+
+    /* SCU1 */
+    if (!sysbus_realize(SYS_BUS_DEVICE(&s->scuio), errp)) {
+        return;
+    }
+    aspeed_mmio_map(s, SYS_BUS_DEVICE(&s->scuio), 0,
+                    sc->memmap[ASPEED_DEV_SCUIO]);
+
+    /* UART */
+    if (!aspeed_soc_uart_realize(s, errp)) {
+        return;
+    }
+
+    /* FMC, The number of CS is set at the board level */
+    object_property_set_int(OBJECT(&s->fmc), "dram-base",
+                            sc->memmap[ASPEED_DEV_SDRAM],
+                            &error_abort);
+    object_property_set_link(OBJECT(&s->fmc), "dram", OBJECT(s->dram_mr),
+                             &error_abort);
+    if (!sysbus_realize(SYS_BUS_DEVICE(&s->fmc), errp)) {
+        return;
+    }
+    aspeed_mmio_map(s, SYS_BUS_DEVICE(&s->fmc), 0, sc->memmap[ASPEED_DEV_FMC]);
+    aspeed_mmio_map(s, SYS_BUS_DEVICE(&s->fmc), 1,
+                    ASPEED_SMC_GET_CLASS(&s->fmc)->flash_window_base);
+    sysbus_connect_irq(SYS_BUS_DEVICE(&s->fmc), 0,
+                       aspeed_soc_get_irq(s, ASPEED_DEV_FMC));
+
+    /* Set up an alias on the FMC CE0 region (boot default) */
+    MemoryRegion *fmc0_mmio = &s->fmc.flashes[0].mmio;
+    memory_region_init_alias(&s->spi_boot, OBJECT(s), "aspeed.spi_boot",
+                             fmc0_mmio, 0, memory_region_size(fmc0_mmio));
+    memory_region_add_subregion(&s->spi_boot_container, 0x0, &s->spi_boot);
+
+    /* SPI */
+    for (i = 0; i < sc->spis_num; i++) {
+        object_property_set_link(OBJECT(&s->spi[i]), "dram",
+                                 OBJECT(s->dram_mr), &error_abort);
+        if (!sysbus_realize(SYS_BUS_DEVICE(&s->spi[i]), errp)) {
+            return;
+        }
+        aspeed_mmio_map(s, SYS_BUS_DEVICE(&s->spi[i]), 0,
+                        sc->memmap[ASPEED_DEV_SPI0 + i]);
+        aspeed_mmio_map(s, SYS_BUS_DEVICE(&s->spi[i]), 1,
+                        ASPEED_SMC_GET_CLASS(&s->spi[i])->flash_window_base);
+    }
+
+    /*
+     * SDMC - SDRAM Memory Controller
+     * The SDMC controller is unlocked at SPL stage.
+     * At present, only supports to emulate booting
+     * start from u-boot stage. Set SDMC controller
+     * unlocked by default. It is a temporarily solution.
+     */
+    object_property_set_bool(OBJECT(&s->sdmc), "unlocked", true,
+                                 &error_abort);
+    if (!sysbus_realize(SYS_BUS_DEVICE(&s->sdmc), errp)) {
+        return;
+    }
+    aspeed_mmio_map(s, SYS_BUS_DEVICE(&s->sdmc), 0,
+                    sc->memmap[ASPEED_DEV_SDMC]);
+
+    /* RAM */
+    if (!aspeed_soc_dram_init(s, errp)) {
+        return;
+    }
+
+    for (i = 0; i < sc->macs_num; i++) {
+        object_property_set_bool(OBJECT(&s->ftgmac100[i]), "aspeed", true,
+                                 &error_abort);
+        if (!sysbus_realize(SYS_BUS_DEVICE(&s->ftgmac100[i]), errp)) {
+            return;
+        }
+        aspeed_mmio_map(s, SYS_BUS_DEVICE(&s->ftgmac100[i]), 0,
+                        sc->memmap[ASPEED_DEV_ETH1 + i]);
+        sysbus_connect_irq(SYS_BUS_DEVICE(&s->ftgmac100[i]), 0,
+                           aspeed_soc_get_irq(s, ASPEED_DEV_ETH1 + i));
+
+        object_property_set_link(OBJECT(&s->mii[i]), "nic",
+                                 OBJECT(&s->ftgmac100[i]), &error_abort);
+        if (!sysbus_realize(SYS_BUS_DEVICE(&s->mii[i]), errp)) {
+            return;
+        }
+
+        aspeed_mmio_map(s, SYS_BUS_DEVICE(&s->mii[i]), 0,
+                        sc->memmap[ASPEED_DEV_MII1 + i]);
+    }
+
+    /* Watch dog */
+    for (i = 0; i < sc->wdts_num; i++) {
+        AspeedWDTClass *awc = ASPEED_WDT_GET_CLASS(&s->wdt[i]);
+        hwaddr wdt_offset = sc->memmap[ASPEED_DEV_WDT] + i * awc->iosize;
+
+        object_property_set_link(OBJECT(&s->wdt[i]), "scu", OBJECT(&s->scu),
+                                 &error_abort);
+        if (!sysbus_realize(SYS_BUS_DEVICE(&s->wdt[i]), errp)) {
+            return;
+        }
+        aspeed_mmio_map(s, SYS_BUS_DEVICE(&s->wdt[i]), 0, wdt_offset);
+    }
+
+    /* SLI */
+    if (!sysbus_realize(SYS_BUS_DEVICE(&s->sli), errp)) {
+        return;
+    }
+    aspeed_mmio_map(s, SYS_BUS_DEVICE(&s->sli), 0, sc->memmap[ASPEED_DEV_SLI]);
+
+    if (!sysbus_realize(SYS_BUS_DEVICE(&s->sliio), errp)) {
+        return;
+    }
+    aspeed_mmio_map(s, SYS_BUS_DEVICE(&s->sliio), 0,
+                    sc->memmap[ASPEED_DEV_SLIIO]);
+
+    create_unimplemented_device("ast2700.dpmcu", 0x11000000, 0x40000);
+    create_unimplemented_device("ast2700.iomem0", 0x12000000, 0x01000000);
+    create_unimplemented_device("ast2700.iomem1", 0x14000000, 0x01000000);
+    create_unimplemented_device("ast2700.ltpi", 0x30000000, 0x1000000);
+    create_unimplemented_device("ast2700.io", 0x0, 0x4000000);
+}
+
+static void aspeed_soc_ast2700_class_init(ObjectClass *oc, void *data)
+{
+    static const char * const valid_cpu_types[] = {
+        ARM_CPU_TYPE_NAME("cortex-a35"),
+        NULL
+    };
+    DeviceClass *dc = DEVICE_CLASS(oc);
+    AspeedSoCClass *sc = ASPEED_SOC_CLASS(oc);
+
+    /* Reason: The Aspeed SoC can only be instantiated from a board */
+    dc->user_creatable = false;
+    dc->realize      = aspeed_soc_ast2700_realize;
+
+    sc->name         = "ast2700-a0";
+    sc->valid_cpu_types = valid_cpu_types;
+    sc->silicon_rev  = AST2700_A0_SILICON_REV;
+    sc->sram_size    = 0x20000;
+    sc->spis_num     = 3;
+    sc->wdts_num     = 8;
+    sc->macs_num     = 1;
+    sc->uarts_num    = 13;
+    sc->num_cpus     = 4;
+    sc->uarts_base   = ASPEED_DEV_UART0;
+    sc->irqmap       = aspeed_soc_ast2700_irqmap;
+    sc->memmap       = aspeed_soc_ast2700_memmap;
+    sc->get_irq      = aspeed_soc_ast2700_get_irq;
+}
+
+static const TypeInfo aspeed_soc_ast27x0_types[] = {
+    {
+        .name           = TYPE_ASPEED27X0_SOC,
+        .parent         = TYPE_ASPEED_SOC,
+        .instance_size  = sizeof(Aspeed27x0SoCState),
+        .abstract       = true,
+    }, {
+        .name           = "ast2700-a0",
+        .parent         = TYPE_ASPEED27X0_SOC,
+        .instance_init  = aspeed_soc_ast2700_init,
+        .class_init     = aspeed_soc_ast2700_class_init,
+    },
+};
+
+DEFINE_TYPES(aspeed_soc_ast27x0_types)
hw/arm/meson.build +1 -0
index aefde0c69a..0c07ab522f 100644
@@ -49,6 +49,7 @@ arm_ss.add(when: 'CONFIG_ASPEED_SOC', if_true: files(
   'aspeed_ast10x0.c',
   'aspeed_eeprom.c',
   'fby35.c'))
+arm_ss.add(when: ['CONFIG_ASPEED_SOC', 'TARGET_AARCH64'], if_true: files('aspeed_ast27x0.c'))
 arm_ss.add(when: 'CONFIG_MPS2', if_true: files('mps2.c'))
 arm_ss.add(when: 'CONFIG_MPS2', if_true: files('mps2-tz.c'))
 arm_ss.add(when: 'CONFIG_MSF2', if_true: files('msf2-soc.c'))
include/hw/arm/aspeed_soc.h +26 -2
index c60fac900a..caef0d100b 100644
@@ -15,6 +15,7 @@
 #include "hw/cpu/a15mpcore.h"
 #include "hw/arm/armv7m.h"
 #include "hw/intc/aspeed_vic.h"
+#include "hw/intc/aspeed_intc.h"
 #include "hw/misc/aspeed_scu.h"
 #include "hw/adc/aspeed_adc.h"
 #include "hw/misc/aspeed_sdmc.h"
@@ -26,6 +27,7 @@
 #include "hw/ssi/aspeed_smc.h"
 #include "hw/misc/aspeed_hace.h"
 #include "hw/misc/aspeed_sbc.h"
+#include "hw/misc/aspeed_sli.h"
 #include "hw/watchdog/wdt_aspeed.h"
 #include "hw/net/ftgmac100.h"
 #include "target/arm/cpu.h"
@@ -38,11 +40,12 @@
 #include "hw/misc/aspeed_peci.h"
 #include "hw/fsi/aspeed_apb2opb.h"
 #include "hw/char/serial.h"
+#include "hw/intc/arm_gicv3.h"
 
 #define ASPEED_SPIS_NUM  2
 #define ASPEED_EHCIS_NUM 2
-#define ASPEED_WDTS_NUM  4
-#define ASPEED_CPUS_NUM  2
+#define ASPEED_WDTS_NUM  8
+#define ASPEED_CPUS_NUM  4
 #define ASPEED_MACS_NUM  4
 #define ASPEED_UARTS_NUM 13
 #define ASPEED_JTAG_NUM  2
@@ -61,6 +64,7 @@ struct AspeedSoCState {
     AspeedI2CState i2c;
     AspeedI3CState i3c;
     AspeedSCUState scu;
+    AspeedSCUState scuio;
     AspeedHACEState hace;
     AspeedXDMAState xdma;
     AspeedADCState adc;
@@ -68,6 +72,8 @@ struct AspeedSoCState {
     AspeedSMCState spi[ASPEED_SPIS_NUM];
     EHCISysBusState ehci[ASPEED_EHCIS_NUM];
     AspeedSBCState sbc;
+    AspeedSLIState sli;
+    AspeedSLIState sliio;
     MemoryRegion secsram;
     UnimplementedDeviceState sbc_unimplemented;
     AspeedSDMCState sdmc;
@@ -117,6 +123,17 @@ struct Aspeed2600SoCState {
 #define TYPE_ASPEED2600_SOC "aspeed2600-soc"
 OBJECT_DECLARE_SIMPLE_TYPE(Aspeed2600SoCState, ASPEED2600_SOC)
 
+struct Aspeed27x0SoCState {
+    AspeedSoCState parent;
+
+    ARMCPU cpu[ASPEED_CPUS_NUM];
+    AspeedINTCState intc;
+    GICv3State gic;
+};
+
+#define TYPE_ASPEED27X0_SOC "aspeed27x0-soc"
+OBJECT_DECLARE_SIMPLE_TYPE(Aspeed27x0SoCState, ASPEED27X0_SOC)
+
 struct Aspeed10x0SoCState {
     AspeedSoCState parent;
 
@@ -168,11 +185,13 @@ enum {
     ASPEED_DEV_UART13,
     ASPEED_DEV_VUART,
     ASPEED_DEV_FMC,
+    ASPEED_DEV_SPI0,
     ASPEED_DEV_SPI1,
     ASPEED_DEV_SPI2,
     ASPEED_DEV_EHCI1,
     ASPEED_DEV_EHCI2,
     ASPEED_DEV_VIC,
+    ASPEED_DEV_INTC,
     ASPEED_DEV_SDMC,
     ASPEED_DEV_SCU,
     ASPEED_DEV_ADC,
@@ -222,6 +241,11 @@ enum {
     ASPEED_DEV_JTAG1,
     ASPEED_DEV_FSI1,
     ASPEED_DEV_FSI2,
+    ASPEED_DEV_SCUIO,
+    ASPEED_DEV_SLI,
+    ASPEED_DEV_SLIIO,
+    ASPEED_GIC_DIST,
+    ASPEED_GIC_REDIST,
 };
 
 qemu_irq aspeed_soc_get_irq(AspeedSoCState *s, int dev);
Signature · 1 line
2.25.1
Reviewed-by on v5 13/17
#21 lore raw

Re: [PATCH v5 13/17] aspeed/soc: Add AST2700 support

Quoted 17 lines · Jamin Lin

Initial definitions for a simple machine using an AST2700 SOC (Cortex-a35 CPU).

AST2700 SOC and its interrupt controller are too complex to handle in the common Aspeed SoC framework. We introduce a new ast2700 class with instance_init and realize handlers.

AST2700 is a 64 bits quad core cpus and support 8 watchdog. Update maximum ASPEED_CPUS_NUM to 4 and ASPEED_WDTS_NUM to 8. In addition, update AspeedSocState to support scuio, sli, sliio and intc.

Add TYPE_ASPEED27X0_SOC machine type.

The SDMC controller is unlocked at SPL stage.
At present, only supports to emulate booting
start from u-boot stage. Set SDMC controller
unlocked by default.

Quoted 7 lines

In INTC, each interrupt of INT 128 to INT 136 combines 32 interrupts. It connect GICINT IRQ GPIO-OUTPUT pins to GIC device with irq 128 to 136. And, if a device irq is 128 to 136, its irq GPIO-OUTPUT pin is connected to GICINT or-gates instead of GIC device.

Thanks,

C.

Quoted 684 lines
---
  hw/arm/aspeed_ast27x0.c     | 563 ++++++++++++++++++++++++++++++++++++
  hw/arm/meson.build          |   1 +
  include/hw/arm/aspeed_soc.h |  28 +-
  3 files changed, 590 insertions(+), 2 deletions(-)

create mode 100644 hw/arm/aspeed_ast27x0.c

hw/arm/aspeed_ast27x0.c new file +563 -0
new file mode 100644
index 0000000000..29e75072c4
@@ -0,0 +1,563 @@
+/*
+ * ASPEED SoC 27x0 family
+ *
+ * Copyright (C) 2024 ASPEED Technology Inc.
+ *
+ * This code is licensed under the GPL version 2 or later.  See
+ * the COPYING file in the top-level directory.
+ *
+ * Implementation extracted from the AST2600 and adapted for AST27x0.
+ */
+
+#include "qemu/osdep.h"
+#include "qapi/error.h"
+#include "hw/misc/unimp.h"
+#include "hw/arm/aspeed_soc.h"
+#include "qemu/module.h"
+#include "qemu/error-report.h"
+#include "hw/i2c/aspeed_i2c.h"
+#include "net/net.h"
+#include "sysemu/sysemu.h"
+#include "hw/intc/arm_gicv3.h"
+#include "qapi/qmp/qlist.h"
+
+static const hwaddr aspeed_soc_ast2700_memmap[] = {
+    [ASPEED_DEV_SPI_BOOT]  =  0x400000000,
+    [ASPEED_DEV_SRAM]      =  0x10000000,
+    [ASPEED_DEV_SDMC]      =  0x12C00000,
+    [ASPEED_DEV_SCU]       =  0x12C02000,
+    [ASPEED_DEV_SCUIO]     =  0x14C02000,
+    [ASPEED_DEV_UART0]     =  0X14C33000,
+    [ASPEED_DEV_UART1]     =  0X14C33100,
+    [ASPEED_DEV_UART2]     =  0X14C33200,
+    [ASPEED_DEV_UART3]     =  0X14C33300,
+    [ASPEED_DEV_UART4]     =  0X12C1A000,
+    [ASPEED_DEV_UART5]     =  0X14C33400,
+    [ASPEED_DEV_UART6]     =  0X14C33500,
+    [ASPEED_DEV_UART7]     =  0X14C33600,
+    [ASPEED_DEV_UART8]     =  0X14C33700,
+    [ASPEED_DEV_UART9]     =  0X14C33800,
+    [ASPEED_DEV_UART10]    =  0X14C33900,
+    [ASPEED_DEV_UART11]    =  0X14C33A00,
+    [ASPEED_DEV_UART12]    =  0X14C33B00,
+    [ASPEED_DEV_WDT]       =  0x14C37000,
+    [ASPEED_DEV_VUART]     =  0X14C30000,
+    [ASPEED_DEV_FMC]       =  0x14000000,
+    [ASPEED_DEV_SPI0]      =  0x14010000,
+    [ASPEED_DEV_SPI1]      =  0x14020000,
+    [ASPEED_DEV_SPI2]      =  0x14030000,
+    [ASPEED_DEV_SDRAM]     =  0x400000000,
+    [ASPEED_DEV_MII1]      =  0x14040000,
+    [ASPEED_DEV_MII2]      =  0x14040008,
+    [ASPEED_DEV_MII3]      =  0x14040010,
+    [ASPEED_DEV_ETH1]      =  0x14050000,
+    [ASPEED_DEV_ETH2]      =  0x14060000,
+    [ASPEED_DEV_ETH3]      =  0x14070000,
+    [ASPEED_DEV_EMMC]      =  0x12090000,
+    [ASPEED_DEV_INTC]      =  0x12100000,
+    [ASPEED_DEV_SLI]       =  0x12C17000,
+    [ASPEED_DEV_SLIIO]     =  0x14C1E000,
+    [ASPEED_GIC_DIST]      =  0x12200000,
+    [ASPEED_GIC_REDIST]    =  0x12280000,
+};
+
+#define AST2700_MAX_IRQ 288
+
+/* Shared Peripheral Interrupt values below are offset by -32 from datasheet */
+static const int aspeed_soc_ast2700_irqmap[] = {
+    [ASPEED_DEV_UART0]     = 132,
+    [ASPEED_DEV_UART1]     = 132,
+    [ASPEED_DEV_UART2]     = 132,
+    [ASPEED_DEV_UART3]     = 132,
+    [ASPEED_DEV_UART4]     = 8,
+    [ASPEED_DEV_UART5]     = 132,
+    [ASPEED_DEV_UART6]     = 132,
+    [ASPEED_DEV_UART7]     = 132,
+    [ASPEED_DEV_UART8]     = 132,
+    [ASPEED_DEV_UART9]     = 132,
+    [ASPEED_DEV_UART10]    = 132,
+    [ASPEED_DEV_UART11]    = 132,
+    [ASPEED_DEV_UART12]    = 132,
+    [ASPEED_DEV_FMC]       = 131,
+    [ASPEED_DEV_SDMC]      = 0,
+    [ASPEED_DEV_SCU]       = 12,
+    [ASPEED_DEV_ADC]       = 130,
+    [ASPEED_DEV_XDMA]      = 5,
+    [ASPEED_DEV_EMMC]      = 15,
+    [ASPEED_DEV_GPIO]      = 11,
+    [ASPEED_DEV_GPIO_1_8V] = 130,
+    [ASPEED_DEV_RTC]       = 13,
+    [ASPEED_DEV_TIMER1]    = 16,
+    [ASPEED_DEV_TIMER2]    = 17,
+    [ASPEED_DEV_TIMER3]    = 18,
+    [ASPEED_DEV_TIMER4]    = 19,
+    [ASPEED_DEV_TIMER5]    = 20,
+    [ASPEED_DEV_TIMER6]    = 21,
+    [ASPEED_DEV_TIMER7]    = 22,
+    [ASPEED_DEV_TIMER8]    = 23,
+    [ASPEED_DEV_WDT]       = 131,
+    [ASPEED_DEV_PWM]       = 131,
+    [ASPEED_DEV_LPC]       = 128,
+    [ASPEED_DEV_IBT]       = 128,
+    [ASPEED_DEV_I2C]       = 130,
+    [ASPEED_DEV_PECI]      = 133,
+    [ASPEED_DEV_ETH1]      = 132,
+    [ASPEED_DEV_ETH2]      = 132,
+    [ASPEED_DEV_ETH3]      = 132,
+    [ASPEED_DEV_HACE]      = 4,
+    [ASPEED_DEV_KCS]       = 128,
+    [ASPEED_DEV_DP]        = 28,
+    [ASPEED_DEV_I3C]       = 131,
+};
+
+/* GICINT 128 */
+static const int aspeed_soc_ast2700_gic128_intcmap[] = {
+    [ASPEED_DEV_LPC]       = 0,
+    [ASPEED_DEV_IBT]       = 2,
+    [ASPEED_DEV_KCS]       = 4,
+};
+
+/* GICINT 130 */
+static const int aspeed_soc_ast2700_gic130_intcmap[] = {
+    [ASPEED_DEV_I2C]        = 0,
+    [ASPEED_DEV_ADC]        = 16,
+    [ASPEED_DEV_GPIO_1_8V]  = 18,
+};
+
+/* GICINT 131 */
+static const int aspeed_soc_ast2700_gic131_intcmap[] = {
+    [ASPEED_DEV_I3C]       = 0,
+    [ASPEED_DEV_WDT]       = 16,
+    [ASPEED_DEV_FMC]       = 25,
+    [ASPEED_DEV_PWM]       = 29,
+};
+
+/* GICINT 132 */
+static const int aspeed_soc_ast2700_gic132_intcmap[] = {
+    [ASPEED_DEV_ETH1]      = 0,
+    [ASPEED_DEV_ETH2]      = 1,
+    [ASPEED_DEV_ETH3]      = 2,
+    [ASPEED_DEV_UART0]     = 7,
+    [ASPEED_DEV_UART1]     = 8,
+    [ASPEED_DEV_UART2]     = 9,
+    [ASPEED_DEV_UART3]     = 10,
+    [ASPEED_DEV_UART5]     = 11,
+    [ASPEED_DEV_UART6]     = 12,
+    [ASPEED_DEV_UART7]     = 13,
+    [ASPEED_DEV_UART8]     = 14,
+    [ASPEED_DEV_UART9]     = 15,
+    [ASPEED_DEV_UART10]    = 16,
+    [ASPEED_DEV_UART11]    = 17,
+    [ASPEED_DEV_UART12]    = 18,
+};
+
+/* GICINT 133 */
+static const int aspeed_soc_ast2700_gic133_intcmap[] = {
+    [ASPEED_DEV_PECI]      = 4,
+};
+
+/* GICINT 128 ~ 136 */
+struct gic_intc_irq_info {
+    int irq;
+    const int *ptr;
+};
+
+static const struct gic_intc_irq_info aspeed_soc_ast2700_gic_intcmap[] = {
+    {128,  aspeed_soc_ast2700_gic128_intcmap},
+    {129,  NULL},
+    {130,  aspeed_soc_ast2700_gic130_intcmap},
+    {131,  aspeed_soc_ast2700_gic131_intcmap},
+    {132,  aspeed_soc_ast2700_gic132_intcmap},
+    {133,  aspeed_soc_ast2700_gic133_intcmap},
+    {134,  NULL},
+    {135,  NULL},
+    {136,  NULL},
+};
+
+static qemu_irq aspeed_soc_ast2700_get_irq(AspeedSoCState *s, int dev)
+{
+    Aspeed27x0SoCState *a = ASPEED27X0_SOC(s);
+    AspeedSoCClass *sc = ASPEED_SOC_GET_CLASS(s);
+    int i;
+
+    for (i = 0; i < ARRAY_SIZE(aspeed_soc_ast2700_gic_intcmap); i++) {
+        if (sc->irqmap[dev] == aspeed_soc_ast2700_gic_intcmap[i].irq) {
+            assert(aspeed_soc_ast2700_gic_intcmap[i].ptr);
+            return qdev_get_gpio_in(DEVICE(&a->intc.orgates[i]),
+                aspeed_soc_ast2700_gic_intcmap[i].ptr[dev]);
+        }
+    }
+
+    return qdev_get_gpio_in(DEVICE(&a->gic), sc->irqmap[dev]);
+}
+
+static void aspeed_soc_ast2700_init(Object *obj)
+{
+    Aspeed27x0SoCState *a = ASPEED27X0_SOC(obj);
+    AspeedSoCState *s = ASPEED_SOC(obj);
+    AspeedSoCClass *sc = ASPEED_SOC_GET_CLASS(s);
+    int i;
+    char socname[8];
+    char typename[64];
+
+    if (sscanf(sc->name, "%7s", socname) != 1) {
+        g_assert_not_reached();
+    }
+
+    for (i = 0; i < sc->num_cpus; i++) {
+        object_initialize_child(obj, "cpu[*]", &a->cpu[i],
+                                aspeed_soc_cpu_type(sc));
+    }
+
+    object_initialize_child(obj, "gic", &a->gic, gicv3_class_name());
+
+    object_initialize_child(obj, "scu", &s->scu, TYPE_ASPEED_2700_SCU);
+    qdev_prop_set_uint32(DEVICE(&s->scu), "silicon-rev",
+                         sc->silicon_rev);
+    object_property_add_alias(obj, "hw-strap1", OBJECT(&s->scu),
+                              "hw-strap1");
+    object_property_add_alias(obj, "hw-strap2", OBJECT(&s->scu),
+                              "hw-strap2");
+    object_property_add_alias(obj, "hw-prot-key", OBJECT(&s->scu),
+                              "hw-prot-key");
+
+    object_initialize_child(obj, "scuio", &s->scuio, TYPE_ASPEED_2700_SCUIO);
+    qdev_prop_set_uint32(DEVICE(&s->scuio), "silicon-rev",
+                         sc->silicon_rev);
+
+    snprintf(typename, sizeof(typename), "aspeed.fmc-%s", socname);
+    object_initialize_child(obj, "fmc", &s->fmc, typename);
+
+    for (i = 0; i < sc->spis_num; i++) {
+        snprintf(typename, sizeof(typename), "aspeed.spi%d-%s", i, socname);
+        object_initialize_child(obj, "spi[*]", &s->spi[i], typename);
+    }
+
+    snprintf(typename, sizeof(typename), "aspeed.sdmc-%s", socname);
+    object_initialize_child(obj, "sdmc", &s->sdmc, typename);
+    object_property_add_alias(obj, "ram-size", OBJECT(&s->sdmc),
+                              "ram-size");
+
+    for (i = 0; i < sc->wdts_num; i++) {
+        snprintf(typename, sizeof(typename), "aspeed.wdt-%s", socname);
+        object_initialize_child(obj, "wdt[*]", &s->wdt[i], typename);
+    }
+
+    for (i = 0; i < sc->macs_num; i++) {
+        object_initialize_child(obj, "ftgmac100[*]", &s->ftgmac100[i],
+                                TYPE_FTGMAC100);
+
+        object_initialize_child(obj, "mii[*]", &s->mii[i], TYPE_ASPEED_MII);
+    }
+
+    for (i = 0; i < sc->uarts_num; i++) {
+        object_initialize_child(obj, "uart[*]", &s->uart[i], TYPE_SERIAL_MM);
+    }
+
+    object_initialize_child(obj, "sli", &s->sli, TYPE_ASPEED_2700_SLI);
+    object_initialize_child(obj, "sliio", &s->sliio, TYPE_ASPEED_2700_SLIIO);
+    object_initialize_child(obj, "intc", &a->intc, TYPE_ASPEED_2700_INTC);
+}
+
+/*
+ * ASPEED ast2700 has 0x0 as cluster ID
+ *
+ * https://developer.arm.com/documentation/100236/0100/register-descriptions/aarch64-system-registers/multiprocessor-affinity-register--el1
+ */
+static uint64_t aspeed_calc_affinity(int cpu)
+{
+    return (0x0 << ARM_AFF1_SHIFT) | cpu;
+}
+
+static bool aspeed_soc_ast2700_gic_realize(DeviceState *dev, Error **errp)
+{
+    Aspeed27x0SoCState *a = ASPEED27X0_SOC(dev);
+    AspeedSoCState *s = ASPEED_SOC(dev);
+    AspeedSoCClass *sc = ASPEED_SOC_GET_CLASS(s);
+    SysBusDevice *gicbusdev;
+    DeviceState *gicdev;
+    QList *redist_region_count;
+    int i;
+
+    gicbusdev = SYS_BUS_DEVICE(&a->gic);
+    gicdev = DEVICE(&a->gic);
+    qdev_prop_set_uint32(gicdev, "revision", 3);
+    qdev_prop_set_uint32(gicdev, "num-cpu", sc->num_cpus);
+    qdev_prop_set_uint32(gicdev, "num-irq", AST2700_MAX_IRQ);
+
+    redist_region_count = qlist_new();
+    qlist_append_int(redist_region_count, sc->num_cpus);
+    qdev_prop_set_array(gicdev, "redist-region-count", redist_region_count);
+
+    if (!sysbus_realize(gicbusdev, errp)) {
+        return false;
+    }
+    sysbus_mmio_map(gicbusdev, 0, sc->memmap[ASPEED_GIC_DIST]);
+    sysbus_mmio_map(gicbusdev, 1, sc->memmap[ASPEED_GIC_REDIST]);
+
+    for (i = 0; i < sc->num_cpus; i++) {
+        DeviceState *cpudev = DEVICE(&a->cpu[i]);
+        int NUM_IRQS = 256, ARCH_GIC_MAINT_IRQ = 9, VIRTUAL_PMU_IRQ = 7;
+        int ppibase = NUM_IRQS + i * GIC_INTERNAL + GIC_NR_SGIS;
+
+        const int timer_irq[] = {
+            [GTIMER_PHYS] = 14,
+            [GTIMER_VIRT] = 11,
+            [GTIMER_HYP]  = 10,
+            [GTIMER_SEC]  = 13,
+        };
+        int j;
+
+        for (j = 0; j < ARRAY_SIZE(timer_irq); j++) {
+            qdev_connect_gpio_out(cpudev, j,
+                    qdev_get_gpio_in(gicdev, ppibase + timer_irq[j]));
+        }
+
+        qemu_irq irq = qdev_get_gpio_in(gicdev,
+                                        ppibase + ARCH_GIC_MAINT_IRQ);
+        qdev_connect_gpio_out_named(cpudev, "gicv3-maintenance-interrupt",
+                                    0, irq);
+        qdev_connect_gpio_out_named(cpudev, "pmu-interrupt", 0,
+                qdev_get_gpio_in(gicdev, ppibase + VIRTUAL_PMU_IRQ));
+
+        sysbus_connect_irq(gicbusdev, i, qdev_get_gpio_in(cpudev, ARM_CPU_IRQ));
+        sysbus_connect_irq(gicbusdev, i + sc->num_cpus,
+                           qdev_get_gpio_in(cpudev, ARM_CPU_FIQ));
+        sysbus_connect_irq(gicbusdev, i + 2 * sc->num_cpus,
+                           qdev_get_gpio_in(cpudev, ARM_CPU_VIRQ));
+        sysbus_connect_irq(gicbusdev, i + 3 * sc->num_cpus,
+                           qdev_get_gpio_in(cpudev, ARM_CPU_VFIQ));
+    }
+
+    return true;
+}
+
+static void aspeed_soc_ast2700_realize(DeviceState *dev, Error **errp)
+{
+    int i;
+    Aspeed27x0SoCState *a = ASPEED27X0_SOC(dev);
+    AspeedSoCState *s = ASPEED_SOC(dev);
+    AspeedSoCClass *sc = ASPEED_SOC_GET_CLASS(s);
+    AspeedINTCClass *ic = ASPEED_INTC_GET_CLASS(&a->intc);
+    g_autofree char *sram_name = NULL;
+
+    /* Default boot region (SPI memory or ROMs) */
+    memory_region_init(&s->spi_boot_container, OBJECT(s),
+                       "aspeed.spi_boot_container", 0x400000000);
+    memory_region_add_subregion(s->memory, sc->memmap[ASPEED_DEV_SPI_BOOT],
+                                &s->spi_boot_container);
+
+    /* CPU */
+    for (i = 0; i < sc->num_cpus; i++) {
+        object_property_set_int(OBJECT(&a->cpu[i]), "mp-affinity",
+                                aspeed_calc_affinity(i), &error_abort);
+
+        object_property_set_int(OBJECT(&a->cpu[i]), "cntfrq", 1125000000,
+                                &error_abort);
+        object_property_set_link(OBJECT(&a->cpu[i]), "memory",
+                                 OBJECT(s->memory), &error_abort);
+
+        if (!qdev_realize(DEVICE(&a->cpu[i]), NULL, errp)) {
+            return;
+        }
+    }
+
+    /* GIC */
+    if (!aspeed_soc_ast2700_gic_realize(dev, errp)) {
+        return;
+    }
+
+    /* INTC */
+    if (!sysbus_realize(SYS_BUS_DEVICE(&a->intc), errp)) {
+        return;
+    }
+
+    aspeed_mmio_map(s, SYS_BUS_DEVICE(&a->intc), 0,
+                    sc->memmap[ASPEED_DEV_INTC]);
+
+    /* GICINT orgates -> INTC -> GIC */
+    for (i = 0; i < ic->num_ints; i++) {
+        qdev_connect_gpio_out(DEVICE(&a->intc.orgates[i]), 0,
+                                qdev_get_gpio_in(DEVICE(&a->intc), i));
+        sysbus_connect_irq(SYS_BUS_DEVICE(&a->intc), i,
+                           qdev_get_gpio_in(DEVICE(&a->gic),
+                                aspeed_soc_ast2700_gic_intcmap[i].irq));
+    }
+
+    /* SRAM */
+    sram_name = g_strdup_printf("aspeed.sram.%d", CPU(&a->cpu[0])->cpu_index);
+    if (!memory_region_init_ram(&s->sram, OBJECT(s), sram_name, sc->sram_size,
+                                 errp)) {
+        return;
+    }
+    memory_region_add_subregion(s->memory,
+                                sc->memmap[ASPEED_DEV_SRAM], &s->sram);
+
+    /* SCU */
+    if (!sysbus_realize(SYS_BUS_DEVICE(&s->scu), errp)) {
+        return;
+    }
+    aspeed_mmio_map(s, SYS_BUS_DEVICE(&s->scu), 0, sc->memmap[ASPEED_DEV_SCU]);
+
+    /* SCU1 */
+    if (!sysbus_realize(SYS_BUS_DEVICE(&s->scuio), errp)) {
+        return;
+    }
+    aspeed_mmio_map(s, SYS_BUS_DEVICE(&s->scuio), 0,
+                    sc->memmap[ASPEED_DEV_SCUIO]);
+
+    /* UART */
+    if (!aspeed_soc_uart_realize(s, errp)) {
+        return;
+    }
+
+    /* FMC, The number of CS is set at the board level */
+    object_property_set_int(OBJECT(&s->fmc), "dram-base",
+                            sc->memmap[ASPEED_DEV_SDRAM],
+                            &error_abort);
+    object_property_set_link(OBJECT(&s->fmc), "dram", OBJECT(s->dram_mr),
+                             &error_abort);
+    if (!sysbus_realize(SYS_BUS_DEVICE(&s->fmc), errp)) {
+        return;
+    }
+    aspeed_mmio_map(s, SYS_BUS_DEVICE(&s->fmc), 0, sc->memmap[ASPEED_DEV_FMC]);
+    aspeed_mmio_map(s, SYS_BUS_DEVICE(&s->fmc), 1,
+                    ASPEED_SMC_GET_CLASS(&s->fmc)->flash_window_base);
+    sysbus_connect_irq(SYS_BUS_DEVICE(&s->fmc), 0,
+                       aspeed_soc_get_irq(s, ASPEED_DEV_FMC));
+
+    /* Set up an alias on the FMC CE0 region (boot default) */
+    MemoryRegion *fmc0_mmio = &s->fmc.flashes[0].mmio;
+    memory_region_init_alias(&s->spi_boot, OBJECT(s), "aspeed.spi_boot",
+                             fmc0_mmio, 0, memory_region_size(fmc0_mmio));
+    memory_region_add_subregion(&s->spi_boot_container, 0x0, &s->spi_boot);
+
+    /* SPI */
+    for (i = 0; i < sc->spis_num; i++) {
+        object_property_set_link(OBJECT(&s->spi[i]), "dram",
+                                 OBJECT(s->dram_mr), &error_abort);
+        if (!sysbus_realize(SYS_BUS_DEVICE(&s->spi[i]), errp)) {
+            return;
+        }
+        aspeed_mmio_map(s, SYS_BUS_DEVICE(&s->spi[i]), 0,
+                        sc->memmap[ASPEED_DEV_SPI0 + i]);
+        aspeed_mmio_map(s, SYS_BUS_DEVICE(&s->spi[i]), 1,
+                        ASPEED_SMC_GET_CLASS(&s->spi[i])->flash_window_base);
+    }
+
+    /*
+     * SDMC - SDRAM Memory Controller
+     * The SDMC controller is unlocked at SPL stage.
+     * At present, only supports to emulate booting
+     * start from u-boot stage. Set SDMC controller
+     * unlocked by default. It is a temporarily solution.
+     */
+    object_property_set_bool(OBJECT(&s->sdmc), "unlocked", true,
+                                 &error_abort);
+    if (!sysbus_realize(SYS_BUS_DEVICE(&s->sdmc), errp)) {
+        return;
+    }
+    aspeed_mmio_map(s, SYS_BUS_DEVICE(&s->sdmc), 0,
+                    sc->memmap[ASPEED_DEV_SDMC]);
+
+    /* RAM */
+    if (!aspeed_soc_dram_init(s, errp)) {
+        return;
+    }
+
+    for (i = 0; i < sc->macs_num; i++) {
+        object_property_set_bool(OBJECT(&s->ftgmac100[i]), "aspeed", true,
+                                 &error_abort);
+        if (!sysbus_realize(SYS_BUS_DEVICE(&s->ftgmac100[i]), errp)) {
+            return;
+        }
+        aspeed_mmio_map(s, SYS_BUS_DEVICE(&s->ftgmac100[i]), 0,
+                        sc->memmap[ASPEED_DEV_ETH1 + i]);
+        sysbus_connect_irq(SYS_BUS_DEVICE(&s->ftgmac100[i]), 0,
+                           aspeed_soc_get_irq(s, ASPEED_DEV_ETH1 + i));
+
+        object_property_set_link(OBJECT(&s->mii[i]), "nic",
+                                 OBJECT(&s->ftgmac100[i]), &error_abort);
+        if (!sysbus_realize(SYS_BUS_DEVICE(&s->mii[i]), errp)) {
+            return;
+        }
+
+        aspeed_mmio_map(s, SYS_BUS_DEVICE(&s->mii[i]), 0,
+                        sc->memmap[ASPEED_DEV_MII1 + i]);
+    }
+
+    /* Watch dog */
+    for (i = 0; i < sc->wdts_num; i++) {
+        AspeedWDTClass *awc = ASPEED_WDT_GET_CLASS(&s->wdt[i]);
+        hwaddr wdt_offset = sc->memmap[ASPEED_DEV_WDT] + i * awc->iosize;
+
+        object_property_set_link(OBJECT(&s->wdt[i]), "scu", OBJECT(&s->scu),
+                                 &error_abort);
+        if (!sysbus_realize(SYS_BUS_DEVICE(&s->wdt[i]), errp)) {
+            return;
+        }
+        aspeed_mmio_map(s, SYS_BUS_DEVICE(&s->wdt[i]), 0, wdt_offset);
+    }
+
+    /* SLI */
+    if (!sysbus_realize(SYS_BUS_DEVICE(&s->sli), errp)) {
+        return;
+    }
+    aspeed_mmio_map(s, SYS_BUS_DEVICE(&s->sli), 0, sc->memmap[ASPEED_DEV_SLI]);
+
+    if (!sysbus_realize(SYS_BUS_DEVICE(&s->sliio), errp)) {
+        return;
+    }
+    aspeed_mmio_map(s, SYS_BUS_DEVICE(&s->sliio), 0,
+                    sc->memmap[ASPEED_DEV_SLIIO]);
+
+    create_unimplemented_device("ast2700.dpmcu", 0x11000000, 0x40000);
+    create_unimplemented_device("ast2700.iomem0", 0x12000000, 0x01000000);
+    create_unimplemented_device("ast2700.iomem1", 0x14000000, 0x01000000);
+    create_unimplemented_device("ast2700.ltpi", 0x30000000, 0x1000000);
+    create_unimplemented_device("ast2700.io", 0x0, 0x4000000);
+}
+
+static void aspeed_soc_ast2700_class_init(ObjectClass *oc, void *data)
+{
+    static const char * const valid_cpu_types[] = {
+        ARM_CPU_TYPE_NAME("cortex-a35"),
+        NULL
+    };
+    DeviceClass *dc = DEVICE_CLASS(oc);
+    AspeedSoCClass *sc = ASPEED_SOC_CLASS(oc);
+
+    /* Reason: The Aspeed SoC can only be instantiated from a board */
+    dc->user_creatable = false;
+    dc->realize      = aspeed_soc_ast2700_realize;
+
+    sc->name         = "ast2700-a0";
+    sc->valid_cpu_types = valid_cpu_types;
+    sc->silicon_rev  = AST2700_A0_SILICON_REV;
+    sc->sram_size    = 0x20000;
+    sc->spis_num     = 3;
+    sc->wdts_num     = 8;
+    sc->macs_num     = 1;
+    sc->uarts_num    = 13;
+    sc->num_cpus     = 4;
+    sc->uarts_base   = ASPEED_DEV_UART0;
+    sc->irqmap       = aspeed_soc_ast2700_irqmap;
+    sc->memmap       = aspeed_soc_ast2700_memmap;
+    sc->get_irq      = aspeed_soc_ast2700_get_irq;
+}
+
+static const TypeInfo aspeed_soc_ast27x0_types[] = {
+    {
+        .name           = TYPE_ASPEED27X0_SOC,
+        .parent         = TYPE_ASPEED_SOC,
+        .instance_size  = sizeof(Aspeed27x0SoCState),
+        .abstract       = true,
+    }, {
+        .name           = "ast2700-a0",
+        .parent         = TYPE_ASPEED27X0_SOC,
+        .instance_init  = aspeed_soc_ast2700_init,
+        .class_init     = aspeed_soc_ast2700_class_init,
+    },
+};
+
+DEFINE_TYPES(aspeed_soc_ast27x0_types)
hw/arm/meson.build +1 -0
index aefde0c69a..0c07ab522f 100644
@@ -49,6 +49,7 @@ arm_ss.add(when: 'CONFIG_ASPEED_SOC', if_true: files(
    'aspeed_ast10x0.c',
    'aspeed_eeprom.c',
    'fby35.c'))
+arm_ss.add(when: ['CONFIG_ASPEED_SOC', 'TARGET_AARCH64'], if_true: files('aspeed_ast27x0.c'))
  arm_ss.add(when: 'CONFIG_MPS2', if_true: files('mps2.c'))
  arm_ss.add(when: 'CONFIG_MPS2', if_true: files('mps2-tz.c'))
  arm_ss.add(when: 'CONFIG_MSF2', if_true: files('msf2-soc.c'))
include/hw/arm/aspeed_soc.h +26 -2
index c60fac900a..caef0d100b 100644
@@ -15,6 +15,7 @@
  #include "hw/cpu/a15mpcore.h"
  #include "hw/arm/armv7m.h"
  #include "hw/intc/aspeed_vic.h"
+#include "hw/intc/aspeed_intc.h"
  #include "hw/misc/aspeed_scu.h"
  #include "hw/adc/aspeed_adc.h"
  #include "hw/misc/aspeed_sdmc.h"
@@ -26,6 +27,7 @@
  #include "hw/ssi/aspeed_smc.h"
  #include "hw/misc/aspeed_hace.h"
  #include "hw/misc/aspeed_sbc.h"
+#include "hw/misc/aspeed_sli.h"
  #include "hw/watchdog/wdt_aspeed.h"
  #include "hw/net/ftgmac100.h"
  #include "target/arm/cpu.h"
@@ -38,11 +40,12 @@
  #include "hw/misc/aspeed_peci.h"
  #include "hw/fsi/aspeed_apb2opb.h"
  #include "hw/char/serial.h"
+#include "hw/intc/arm_gicv3.h"
 
  #define ASPEED_SPIS_NUM  2
  #define ASPEED_EHCIS_NUM 2
-#define ASPEED_WDTS_NUM  4
-#define ASPEED_CPUS_NUM  2
+#define ASPEED_WDTS_NUM  8
+#define ASPEED_CPUS_NUM  4
  #define ASPEED_MACS_NUM  4
  #define ASPEED_UARTS_NUM 13
  #define ASPEED_JTAG_NUM  2
@@ -61,6 +64,7 @@ struct AspeedSoCState {
      AspeedI2CState i2c;
      AspeedI3CState i3c;
      AspeedSCUState scu;
+    AspeedSCUState scuio;
      AspeedHACEState hace;
      AspeedXDMAState xdma;
      AspeedADCState adc;
@@ -68,6 +72,8 @@ struct AspeedSoCState {
      AspeedSMCState spi[ASPEED_SPIS_NUM];
      EHCISysBusState ehci[ASPEED_EHCIS_NUM];
      AspeedSBCState sbc;
+    AspeedSLIState sli;
+    AspeedSLIState sliio;
      MemoryRegion secsram;
      UnimplementedDeviceState sbc_unimplemented;
      AspeedSDMCState sdmc;
@@ -117,6 +123,17 @@ struct Aspeed2600SoCState {
  #define TYPE_ASPEED2600_SOC "aspeed2600-soc"
  OBJECT_DECLARE_SIMPLE_TYPE(Aspeed2600SoCState, ASPEED2600_SOC)
 
+struct Aspeed27x0SoCState {
+    AspeedSoCState parent;
+
+    ARMCPU cpu[ASPEED_CPUS_NUM];
+    AspeedINTCState intc;
+    GICv3State gic;
+};
+
+#define TYPE_ASPEED27X0_SOC "aspeed27x0-soc"
+OBJECT_DECLARE_SIMPLE_TYPE(Aspeed27x0SoCState, ASPEED27X0_SOC)
+
  struct Aspeed10x0SoCState {
      AspeedSoCState parent;
 
@@ -168,11 +185,13 @@ enum {
      ASPEED_DEV_UART13,
      ASPEED_DEV_VUART,
      ASPEED_DEV_FMC,
+    ASPEED_DEV_SPI0,
      ASPEED_DEV_SPI1,
      ASPEED_DEV_SPI2,
      ASPEED_DEV_EHCI1,
      ASPEED_DEV_EHCI2,
      ASPEED_DEV_VIC,
+    ASPEED_DEV_INTC,
      ASPEED_DEV_SDMC,
      ASPEED_DEV_SCU,
      ASPEED_DEV_ADC,
@@ -222,6 +241,11 @@ enum {
      ASPEED_DEV_JTAG1,
      ASPEED_DEV_FSI1,
      ASPEED_DEV_FSI2,
+    ASPEED_DEV_SCUIO,
+    ASPEED_DEV_SLI,
+    ASPEED_DEV_SLIIO,
+    ASPEED_GIC_DIST,
+    ASPEED_GIC_REDIST,
  };
 
  qemu_irq aspeed_soc_get_irq(AspeedSoCState *s, int dev);
#22 lore raw

Re: [PATCH v5 13/17] aspeed/soc: Add AST2700 support

In reply to Jamin Lin via

Hi Jamin,

Quoted 80 lines · Jamin Lin

Initial definitions for a simple machine using an AST2700 SOC (Cortex-a35 CPU).

AST2700 SOC and its interrupt controller are too complex to handle in the common Aspeed SoC framework. We introduce a new ast2700 class with instance_init and realize handlers.

AST2700 is a 64 bits quad core cpus and support 8 watchdog. Update maximum ASPEED_CPUS_NUM to 4 and ASPEED_WDTS_NUM to 8. In addition, update AspeedSocState to support scuio, sli, sliio and intc.

Add TYPE_ASPEED27X0_SOC machine type.

The SDMC controller is unlocked at SPL stage.
At present, only supports to emulate booting
start from u-boot stage. Set SDMC controller
unlocked by default.

In INTC, each interrupt of INT 128 to INT 136 combines 32 interrupts. It connect GICINT IRQ GPIO-OUTPUT pins to GIC device with irq 128 to 136. And, if a device irq is 128 to 136, its irq GPIO-OUTPUT pin is connected to GICINT or-gates instead of GIC device.

---
  hw/arm/aspeed_ast27x0.c     | 563 ++++++++++++++++++++++++++++++++++++
  hw/arm/meson.build          |   1 +
  include/hw/arm/aspeed_soc.h |  28 +-
  3 files changed, 590 insertions(+), 2 deletions(-)

create mode 100644 hw/arm/aspeed_ast27x0.c

hw/arm/aspeed_ast27x0.c new file +48 -0
+static bool aspeed_soc_ast2700_gic_realize(DeviceState *dev, Error **errp)
+{
+    Aspeed27x0SoCState *a = ASPEED27X0_SOC(dev);
+    AspeedSoCState *s = ASPEED_SOC(dev);
+    AspeedSoCClass *sc = ASPEED_SOC_GET_CLASS(s);
+    SysBusDevice *gicbusdev;
+    DeviceState *gicdev;
+    QList *redist_region_count;
+    int i;
+
+    gicbusdev = SYS_BUS_DEVICE(&a->gic);
+    gicdev = DEVICE(&a->gic);
+    qdev_prop_set_uint32(gicdev, "revision", 3);
+    qdev_prop_set_uint32(gicdev, "num-cpu", sc->num_cpus);
+    qdev_prop_set_uint32(gicdev, "num-irq", AST2700_MAX_IRQ);
+
+    redist_region_count = qlist_new();
+    qlist_append_int(redist_region_count, sc->num_cpus);
+    qdev_prop_set_array(gicdev, "redist-region-count", redist_region_count);
+
+    if (!sysbus_realize(gicbusdev, errp)) {
+        return false;
+    }
+    sysbus_mmio_map(gicbusdev, 0, sc->memmap[ASPEED_GIC_DIST]);
+    sysbus_mmio_map(gicbusdev, 1, sc->memmap[ASPEED_GIC_REDIST]);
+
+    for (i = 0; i < sc->num_cpus; i++) {
+        DeviceState *cpudev = DEVICE(&a->cpu[i]);
+        int NUM_IRQS = 256, ARCH_GIC_MAINT_IRQ = 9, VIRTUAL_PMU_IRQ = 7;
+        int ppibase = NUM_IRQS + i * GIC_INTERNAL + GIC_NR_SGIS;
+
+        const int timer_irq[] = {
+            [GTIMER_PHYS] = 14,
+            [GTIMER_VIRT] = 11,
+            [GTIMER_HYP]  = 10,
+            [GTIMER_SEC]  = 13,
+        };
+        int j;
+
+        for (j = 0; j < ARRAY_SIZE(timer_irq); j++) {
+            qdev_connect_gpio_out(cpudev, j,
+                    qdev_get_gpio_in(gicdev, ppibase + timer_irq[j]));
+        }
+
+        qemu_irq irq = qdev_get_gpio_in(gicdev,
+                                        ppibase + ARCH_GIC_MAINT_IRQ);
+        qdev_connect_gpio_out_named(cpudev, "gicv3-maintenance-interrupt",
+                                    0, irq);

hw/arm/aspeed_ast27x0.c line 329

Quoted 10 lines
hw/arm/aspeed_ast27x0.c new file +10 -0
+        qdev_connect_gpio_out_named(cpudev, "pmu-interrupt", 0,
+                qdev_get_gpio_in(gicdev, ppibase + VIRTUAL_PMU_IRQ));
+
+        sysbus_connect_irq(gicbusdev, i, qdev_get_gpio_in(cpudev, ARM_CPU_IRQ));
+        sysbus_connect_irq(gicbusdev, i + sc->num_cpus,
+                           qdev_get_gpio_in(cpudev, ARM_CPU_FIQ));
+        sysbus_connect_irq(gicbusdev, i + 2 * sc->num_cpus,
+                           qdev_get_gpio_in(cpudev, ARM_CPU_VIRQ));
+        sysbus_connect_irq(gicbusdev, i + 3 * sc->num_cpus,
+                           qdev_get_gpio_in(cpudev, ARM_CPU_VFIQ));

Your patch was merged around the same time Jinjie added NMI support (see commit b36a32ead1 "target/arm: Add support for Non-maskable Interrupt").

Should we add them now?

Quoted 4 lines
hw/arm/aspeed_ast27x0.c new file +4 -0
+    }
+
+    return true;
+}
#23 lore raw

RE: [PATCH v5 13/17] aspeed/soc: Add AST2700 support

Hi Philippe,

Quoted 114 lines

From: Philippe Mathieu-Daudé <[email protected]>
Sent: Thursday, January 30, 2025 11:14 PM
To: Jamin Lin <[email protected]>; Cédric Le Goater <[email protected]>; Peter Maydell <[email protected]>; Andrew Jeffery <[email protected]>; Joel Stanley <[email protected]>; Alistair Francis <[email protected]>; Cleber Rosa <[email protected]>; Wainer dos Santos Moschetta <[email protected]>; Beraldo Leal <[email protected]>; open list:ASPEED BMCs <[email protected]>; open list:All patches CC here <[email protected]>; Jinjie Ruan <[email protected]>
Cc: Troy Lee <[email protected]>; Yunlin Tang <[email protected]>
Subject: Re: [PATCH v5 13/17] aspeed/soc: Add AST2700 support

Hi Jamin,

Quoted 1 line · Jamin Lin

Initial definitions for a simple machine using an AST2700 SOC (Cortex-a35

CPU).

Quoted 20 lines

AST2700 SOC and its interrupt controller are too complex to handle in the common Aspeed SoC framework. We introduce a new ast2700 class with instance_init and realize handlers.

AST2700 is a 64 bits quad core cpus and support 8 watchdog. Update maximum ASPEED_CPUS_NUM to 4 and ASPEED_WDTS_NUM to 8. In addition, update AspeedSocState to support scuio, sli, sliio and intc.

Add TYPE_ASPEED27X0_SOC machine type.

The SDMC controller is unlocked at SPL stage.
At present, only supports to emulate booting start from u-boot stage. Set SDMC controller unlocked by default.

In INTC, each interrupt of INT 128 to INT 136 combines 32 interrupts. It connect GICINT IRQ GPIO-OUTPUT pins to GIC device with irq 128 to 136. And, if a device irq is 128 to 136, its irq GPIO-OUTPUT pin is connected to GICINT or-gates instead of GIC device.

Quoted 4 lines
---
  hw/arm/aspeed_ast27x0.c     | 563

++++++++++++++++++++++++++++++++++++

Quoted 26 lines
  hw/arm/meson.build          |   1 +
  include/hw/arm/aspeed_soc.h |  28 +-
  3 files changed, 590 insertions(+), 2 deletions(-)

create mode 100644 hw/arm/aspeed_ast27x0.c

hw/arm/aspeed_ast27x0.c new file +20 -0
+static bool aspeed_soc_ast2700_gic_realize(DeviceState *dev, Error
+**errp) {
+    Aspeed27x0SoCState *a = ASPEED27X0_SOC(dev);
+    AspeedSoCState *s = ASPEED_SOC(dev);
+    AspeedSoCClass *sc = ASPEED_SOC_GET_CLASS(s);
+    SysBusDevice *gicbusdev;
+    DeviceState *gicdev;
+    QList *redist_region_count;
+    int i;
+
+    gicbusdev = SYS_BUS_DEVICE(&a->gic);
+    gicdev = DEVICE(&a->gic);
+    qdev_prop_set_uint32(gicdev, "revision", 3);
+    qdev_prop_set_uint32(gicdev, "num-cpu", sc->num_cpus);
+    qdev_prop_set_uint32(gicdev, "num-irq", AST2700_MAX_IRQ);
+
+    redist_region_count = qlist_new();
+    qlist_append_int(redist_region_count, sc->num_cpus);
+    qdev_prop_set_array(gicdev, "redist-region-count",
+ redist_region_count);

hw/arm/aspeed_ast27x0.c

Quoted 10 lines
hw/arm/aspeed_ast27x0.c new file +10 -0
+
+    if (!sysbus_realize(gicbusdev, errp)) {
+        return false;
+    }
+    sysbus_mmio_map(gicbusdev, 0, sc->memmap[ASPEED_GIC_DIST]);
+    sysbus_mmio_map(gicbusdev, 1, sc->memmap[ASPEED_GIC_REDIST]);
+
+    for (i = 0; i < sc->num_cpus; i++) {
+        DeviceState *cpudev = DEVICE(&a->cpu[i]);
+        int NUM_IRQS = 256, ARCH_GIC_MAINT_IRQ = 9,

VIRTUAL_PMU_IRQ = 7;

Quoted 7 lines
hw/arm/aspeed_ast27x0.c new file +7 -0
+        int ppibase = NUM_IRQS + i * GIC_INTERNAL + GIC_NR_SGIS;
+
+        const int timer_irq[] = {
+            [GTIMER_PHYS] = 14,
+            [GTIMER_VIRT] = 11,
+            [GTIMER_HYP]  = 10,
+            [GTIMER_SEC]  = 13,

hw/arm/aspeed_ast27x0.c

Quoted 10 lines
hw/arm/aspeed_ast27x0.c new file +10 -0
+        };
+        int j;
+
+        for (j = 0; j < ARRAY_SIZE(timer_irq); j++) {
+            qdev_connect_gpio_out(cpudev, j,
+                    qdev_get_gpio_in(gicdev, ppibase + timer_irq[j]));
+        }
+
+        qemu_irq irq = qdev_get_gpio_in(gicdev,
+                                        ppibase +

ARCH_GIC_MAINT_IRQ);

Quoted 1 line

+ qdev_connect_gpio_out_named(cpudev,

"gicv3-maintenance-interrupt",

hw/arm/aspeed_ast27x0.c

Quoted 3 lines
hw/arm/aspeed_ast27x0.c new file +3 -0
+                                    0, irq);
+        qdev_connect_gpio_out_named(cpudev, "pmu-interrupt", 0,
+                qdev_get_gpio_in(gicdev, ppibase +

VIRTUAL_PMU_IRQ));

Review

Quoted 2 lines
(quoted diff) +2 -0
+
+        sysbus_connect_irq(gicbusdev, i, qdev_get_gpio_in(cpudev,

ARM_CPU_IRQ));

Review

Quoted 2 lines
(quoted diff) +2 -0
+        sysbus_connect_irq(gicbusdev, i + sc->num_cpus,
+                           qdev_get_gpio_in(cpudev,

ARM_CPU_FIQ));

Review

Quoted 2 lines
(quoted diff) +2 -0
+        sysbus_connect_irq(gicbusdev, i + 2 * sc->num_cpus,
+                           qdev_get_gpio_in(cpudev,

ARM_CPU_VIRQ));

Quoted 9 lines

Review

Quoted 2 lines
(quoted diff) +2 -0
+        sysbus_connect_irq(gicbusdev, i + 3 * sc->num_cpus,
+                           qdev_get_gpio_in(cpudev,

ARM_CPU_VFIQ));

Your patch was merged around the same time Jinjie added NMI support (see commit b36a32ead1 "target/arm: Add support for Non-maskable Interrupt").

Should we add them now?

After I read this commit, https://github.com/qemu/qemu/commit/b36a32ead, it seems that it improves the handling of ARM_CPU_VIRQ and ARM_CPU_VFIQ. I tested the changes by removing the following lines and worked for AST2700.

sysbus_connect_irq(gicbusdev, i + 2 * nr_apu_cpus,

                          qdev_get_gpio_in(cpudev, ARM_CPU_VIRQ));
sysbus_connect_irq(gicbusdev, i + 3 * nr_apu_cpus,
                  qdev_get_gpio_in(cpudev, ARM_CPU_VFIQ));

Are you suggesting that these lines should be removed?

Thanks-Jamin

Quoted 4 lines
Quoted 4 lines
hw/arm/aspeed_ast27x0.c new file +4 -0
+    }
+
+    return true;
+}
#24 lore raw

RE: [PATCH v5 13/17] aspeed/soc: Add AST2700 support

Hi Philippe,

Quoted 150 lines

From: Jamin Lin
Sent: Monday, February 3, 2025 3:29 PM
To: Philippe Mathieu-Daudé <[email protected]>; Cédric Le Goater <[email protected]>; Peter Maydell <[email protected]>; Andrew Jeffery <[email protected]>; Joel Stanley <[email protected]>; Alistair Francis <[email protected]>; Cleber Rosa <[email protected]>; Wainer dos Santos Moschetta <[email protected]>; Beraldo Leal <[email protected]>; open list:ASPEED BMCs <[email protected]>; open list:All patches CC here <[email protected]>; Jinjie Ruan <[email protected]>
Cc: Troy Lee <[email protected]>; Yunlin Tang <[email protected]>
Subject: RE: [PATCH v5 13/17] aspeed/soc: Add AST2700 support

Hi Philippe,

Quoted 7 lines

From: Philippe Mathieu-Daudé <[email protected]>
Sent: Thursday, January 30, 2025 11:14 PM
To: Jamin Lin <[email protected]>; Cédric Le Goater <[email protected]>; Peter Maydell <[email protected]>; Andrew Jeffery <[email protected]>; Joel Stanley <[email protected]>; Alistair Francis <[email protected]>; Cleber Rosa <[email protected]>; Wainer dos Santos Moschetta

<[email protected]>;

Quoted 62 lines

Beraldo Leal <[email protected]>; open list:ASPEED BMCs <[email protected]>; open list:All patches CC here <[email protected]>; Jinjie Ruan <[email protected]>
Cc: Troy Lee <[email protected]>; Yunlin Tang <[email protected]>
Subject: Re: [PATCH v5 13/17] aspeed/soc: Add AST2700 support

Hi Jamin,

Quoted 2 lines · Jamin Lin

Initial definitions for a simple machine using an AST2700 SOC (Cortex-a35

CPU).

Quoted 20 lines

AST2700 SOC and its interrupt controller are too complex to handle in the common Aspeed SoC framework. We introduce a new ast2700 class with instance_init and realize handlers.

AST2700 is a 64 bits quad core cpus and support 8 watchdog. Update maximum ASPEED_CPUS_NUM to 4 and ASPEED_WDTS_NUM to 8. In addition, update AspeedSocState to support scuio, sli, sliio and intc.

Add TYPE_ASPEED27X0_SOC machine type.

The SDMC controller is unlocked at SPL stage.
At present, only supports to emulate booting start from u-boot stage. Set SDMC controller unlocked by default.

In INTC, each interrupt of INT 128 to INT 136 combines 32 interrupts. It connect GICINT IRQ GPIO-OUTPUT pins to GIC device with irq 128 to 136. And, if a device irq is 128 to 136, its irq GPIO-OUTPUT pin is connected to GICINT or-gates instead of GIC device.

Quoted 4 lines
---
  hw/arm/aspeed_ast27x0.c     | 563

++++++++++++++++++++++++++++++++++++

Quoted 24 lines
  hw/arm/meson.build          |   1 +
  include/hw/arm/aspeed_soc.h |  28 +-
  3 files changed, 590 insertions(+), 2 deletions(-)

create mode 100644 hw/arm/aspeed_ast27x0.c

hw/arm/aspeed_ast27x0.c new file +18 -0
+static bool aspeed_soc_ast2700_gic_realize(DeviceState *dev, Error
+**errp) {
+    Aspeed27x0SoCState *a = ASPEED27X0_SOC(dev);
+    AspeedSoCState *s = ASPEED_SOC(dev);
+    AspeedSoCClass *sc = ASPEED_SOC_GET_CLASS(s);
+    SysBusDevice *gicbusdev;
+    DeviceState *gicdev;
+    QList *redist_region_count;
+    int i;
+
+    gicbusdev = SYS_BUS_DEVICE(&a->gic);
+    gicdev = DEVICE(&a->gic);
+    qdev_prop_set_uint32(gicdev, "revision", 3);
+    qdev_prop_set_uint32(gicdev, "num-cpu", sc->num_cpus);
+    qdev_prop_set_uint32(gicdev, "num-irq", AST2700_MAX_IRQ);
+
+    redist_region_count = qlist_new();
+    qlist_append_int(redist_region_count, sc->num_cpus);
Quoted 8 lines

hw/arm/aspeed_ast27x0.c

Quoted 8 lines
hw/arm/aspeed_ast27x0.c new file +8 -0
+    qdev_prop_set_array(gicdev, "redist-region-count",
+ redist_region_count);
+
+    if (!sysbus_realize(gicbusdev, errp)) {
+        return false;
+    }
+    sysbus_mmio_map(gicbusdev, 0, sc->memmap[ASPEED_GIC_DIST]);
+    sysbus_mmio_map(gicbusdev, 1,

sc->memmap[ASPEED_GIC_REDIST]);

Quoted 5 lines

hw/arm/aspeed_ast27x0.c

Quoted 4 lines
hw/arm/aspeed_ast27x0.c new file +4 -0
+
+    for (i = 0; i < sc->num_cpus; i++) {
+        DeviceState *cpudev = DEVICE(&a->cpu[i]);
+        int NUM_IRQS = 256, ARCH_GIC_MAINT_IRQ = 9,

VIRTUAL_PMU_IRQ = 7;

Quoted 13 lines

hw/arm/aspeed_ast27x0.c

Quoted 13 lines
hw/arm/aspeed_ast27x0.c new file +13 -0
+        int ppibase = NUM_IRQS + i * GIC_INTERNAL + GIC_NR_SGIS;
+
+        const int timer_irq[] = {
+            [GTIMER_PHYS] = 14,
+            [GTIMER_VIRT] = 11,
+            [GTIMER_HYP]  = 10,
+            [GTIMER_SEC]  = 13,
+        };
+        int j;
+
+        for (j = 0; j < ARRAY_SIZE(timer_irq); j++) {
+            qdev_connect_gpio_out(cpudev, j,
+                    qdev_get_gpio_in(gicdev, ppibase +

timer_irq[j]));

Quoted 19 lines

hw/arm/aspeed_ast27x0.c

Quoted 4 lines
hw/arm/aspeed_ast27x0.c new file +4 -0
+        }
+
+        qemu_irq irq = qdev_get_gpio_in(gicdev,
+                                        ppibase +

ARCH_GIC_MAINT_IRQ);

Quoted 1 line

+ qdev_connect_gpio_out_named(cpudev,

"gicv3-maintenance-interrupt",

hw/arm/aspeed_ast27x0.c

Quoted 3 lines
hw/arm/aspeed_ast27x0.c new file +3 -0
+                                    0, irq);
+        qdev_connect_gpio_out_named(cpudev, "pmu-interrupt", 0,
+                qdev_get_gpio_in(gicdev, ppibase +

VIRTUAL_PMU_IRQ));

Review

Quoted 2 lines
(quoted diff) +2 -0
+
+        sysbus_connect_irq(gicbusdev, i, qdev_get_gpio_in(cpudev,

ARM_CPU_IRQ));

Review

Quoted 2 lines
(quoted diff) +2 -0
+        sysbus_connect_irq(gicbusdev, i + sc->num_cpus,
+                           qdev_get_gpio_in(cpudev,

ARM_CPU_FIQ));

Review

Quoted 2 lines
(quoted diff) +2 -0
+        sysbus_connect_irq(gicbusdev, i + 2 * sc->num_cpus,
+                           qdev_get_gpio_in(cpudev,
Quoted 7 lines

ARM_CPU_VIRQ));

Review

Quoted 2 lines
(quoted diff) +2 -0
+        sysbus_connect_irq(gicbusdev, i + 3 * sc->num_cpus,
+                           qdev_get_gpio_in(cpudev,

ARM_CPU_VFIQ));

Your patch was merged around the same time Jinjie added NMI support (see commit b36a32ead1 "target/arm: Add support for Non-maskable

Interrupt").

Quoted 3 lines

Should we add them now?

After I read this commit, https://github.com/qemu/qemu/commit/b36a32ead,
it seems that it improves the handling of ARM_CPU_VIRQ and ARM_CPU_VFIQ.
I tested the changes by removing the following lines and worked for AST2700.

Quoted 9 lines

sysbus_connect_irq(gicbusdev, i + 2 * nr_apu_cpus,

                          qdev_get_gpio_in(cpudev, ARM_CPU_VIRQ));
sysbus_connect_irq(gicbusdev, i + 3 * nr_apu_cpus,
                  qdev_get_gpio_in(cpudev, ARM_CPU_VFIQ));

Are you suggesting that these lines should be removed?

Thanks-Jamin

Sorry, I misunderstood your question.
I referred to this line, https://github.com/qemu/qemu/blob/master/hw/arm/virt.c#L907, in QEMU's virt.c to add NMI support.

Are you suggesting adding the following lines to enable NMI support? It worked as well.

```
sysbus_connect_irq(gicbusdev, i + 4 * sc->num_cpus,
                   qdev_get_gpio_in(cpudev, ARM_CPU_NMI));
sysbus_connect_irq(gicbusdev, i + 5 * sc->num_cpus,
                   qdev_get_gpio_in(cpudev, ARM_CPU_VINMI));
```

Thanks-Jamin

Quoted 4 lines
Quoted 4 lines
Quoted 4 lines
hw/arm/aspeed_ast27x0.c new file +4 -0
+    }
+
+    return true;
+}
#25 lore raw

Re: [PATCH v5 13/17] aspeed/soc: Add AST2700 support

Quoted 151 lines · Jamin Lin

Hi Philippe,

Quoted 133 lines

From: Jamin Lin
Sent: Monday, February 3, 2025 3:29 PM
To: Philippe Mathieu-Daudé <[email protected]>; Cédric Le Goater <[email protected]>; Peter Maydell <[email protected]>; Andrew Jeffery <[email protected]>; Joel Stanley <[email protected]>; Alistair Francis <[email protected]>; Cleber Rosa <[email protected]>; Wainer dos Santos Moschetta <[email protected]>; Beraldo Leal <[email protected]>; open list:ASPEED BMCs <[email protected]>; open list:All patches CC here <[email protected]>; Jinjie Ruan <[email protected]>
Cc: Troy Lee <[email protected]>; Yunlin Tang <[email protected]>
Subject: RE: [PATCH v5 13/17] aspeed/soc: Add AST2700 support

Hi Philippe,

Quoted 7 lines

From: Philippe Mathieu-Daudé <[email protected]>
Sent: Thursday, January 30, 2025 11:14 PM
To: Jamin Lin <[email protected]>; Cédric Le Goater <[email protected]>; Peter Maydell <[email protected]>; Andrew Jeffery <[email protected]>; Joel Stanley <[email protected]>; Alistair Francis <[email protected]>; Cleber Rosa <[email protected]>; Wainer dos Santos Moschetta

<[email protected]>;

Quoted 62 lines

Beraldo Leal <[email protected]>; open list:ASPEED BMCs <[email protected]>; open list:All patches CC here <[email protected]>; Jinjie Ruan <[email protected]>
Cc: Troy Lee <[email protected]>; Yunlin Tang <[email protected]>
Subject: Re: [PATCH v5 13/17] aspeed/soc: Add AST2700 support

Hi Jamin,

Quoted 2 lines · Jamin Lin

Initial definitions for a simple machine using an AST2700 SOC (Cortex-a35

CPU).

Quoted 20 lines

AST2700 SOC and its interrupt controller are too complex to handle in the common Aspeed SoC framework. We introduce a new ast2700 class with instance_init and realize handlers.

AST2700 is a 64 bits quad core cpus and support 8 watchdog. Update maximum ASPEED_CPUS_NUM to 4 and ASPEED_WDTS_NUM to 8. In addition, update AspeedSocState to support scuio, sli, sliio and intc.

Add TYPE_ASPEED27X0_SOC machine type.

The SDMC controller is unlocked at SPL stage.
At present, only supports to emulate booting start from u-boot stage. Set SDMC controller unlocked by default.

In INTC, each interrupt of INT 128 to INT 136 combines 32 interrupts. It connect GICINT IRQ GPIO-OUTPUT pins to GIC device with irq 128 to 136. And, if a device irq is 128 to 136, its irq GPIO-OUTPUT pin is connected to GICINT or-gates instead of GIC device.

Quoted 4 lines
---
   hw/arm/aspeed_ast27x0.c     | 563

++++++++++++++++++++++++++++++++++++

Quoted 24 lines
   hw/arm/meson.build          |   1 +
   include/hw/arm/aspeed_soc.h |  28 +-
   3 files changed, 590 insertions(+), 2 deletions(-)

create mode 100644 hw/arm/aspeed_ast27x0.c

hw/arm/aspeed_ast27x0.c new file +18 -0
+static bool aspeed_soc_ast2700_gic_realize(DeviceState *dev, Error
+**errp) {
+    Aspeed27x0SoCState *a = ASPEED27X0_SOC(dev);
+    AspeedSoCState *s = ASPEED_SOC(dev);
+    AspeedSoCClass *sc = ASPEED_SOC_GET_CLASS(s);
+    SysBusDevice *gicbusdev;
+    DeviceState *gicdev;
+    QList *redist_region_count;
+    int i;
+
+    gicbusdev = SYS_BUS_DEVICE(&a->gic);
+    gicdev = DEVICE(&a->gic);
+    qdev_prop_set_uint32(gicdev, "revision", 3);
+    qdev_prop_set_uint32(gicdev, "num-cpu", sc->num_cpus);
+    qdev_prop_set_uint32(gicdev, "num-irq", AST2700_MAX_IRQ);
+
+    redist_region_count = qlist_new();
+    qlist_append_int(redist_region_count, sc->num_cpus);
Quoted 8 lines

hw/arm/aspeed_ast27x0.c

Quoted 8 lines
hw/arm/aspeed_ast27x0.c new file +8 -0
+    qdev_prop_set_array(gicdev, "redist-region-count",
+ redist_region_count);
+
+    if (!sysbus_realize(gicbusdev, errp)) {
+        return false;
+    }
+    sysbus_mmio_map(gicbusdev, 0, sc->memmap[ASPEED_GIC_DIST]);
+    sysbus_mmio_map(gicbusdev, 1,

sc->memmap[ASPEED_GIC_REDIST]);

Quoted 5 lines

hw/arm/aspeed_ast27x0.c

Quoted 4 lines
hw/arm/aspeed_ast27x0.c new file +4 -0
+
+    for (i = 0; i < sc->num_cpus; i++) {
+        DeviceState *cpudev = DEVICE(&a->cpu[i]);
+        int NUM_IRQS = 256, ARCH_GIC_MAINT_IRQ = 9,

VIRTUAL_PMU_IRQ = 7;

Quoted 13 lines

hw/arm/aspeed_ast27x0.c

Quoted 13 lines
hw/arm/aspeed_ast27x0.c new file +13 -0
+        int ppibase = NUM_IRQS + i * GIC_INTERNAL + GIC_NR_SGIS;
+
+        const int timer_irq[] = {
+            [GTIMER_PHYS] = 14,
+            [GTIMER_VIRT] = 11,
+            [GTIMER_HYP]  = 10,
+            [GTIMER_SEC]  = 13,
+        };
+        int j;
+
+        for (j = 0; j < ARRAY_SIZE(timer_irq); j++) {
+            qdev_connect_gpio_out(cpudev, j,
+                    qdev_get_gpio_in(gicdev, ppibase +

timer_irq[j]));

Quoted 19 lines

hw/arm/aspeed_ast27x0.c

Quoted 4 lines
hw/arm/aspeed_ast27x0.c new file +4 -0
+        }
+
+        qemu_irq irq = qdev_get_gpio_in(gicdev,
+                                        ppibase +

ARCH_GIC_MAINT_IRQ);

Quoted 1 line

+ qdev_connect_gpio_out_named(cpudev,

"gicv3-maintenance-interrupt",

hw/arm/aspeed_ast27x0.c

Quoted 3 lines
hw/arm/aspeed_ast27x0.c new file +3 -0
+                                    0, irq);
+        qdev_connect_gpio_out_named(cpudev, "pmu-interrupt", 0,
+                qdev_get_gpio_in(gicdev, ppibase +

VIRTUAL_PMU_IRQ));

Review

Quoted 2 lines
(quoted diff) +2 -0
+
+        sysbus_connect_irq(gicbusdev, i, qdev_get_gpio_in(cpudev,

ARM_CPU_IRQ));

Review

Quoted 2 lines
(quoted diff) +2 -0
+        sysbus_connect_irq(gicbusdev, i + sc->num_cpus,
+                           qdev_get_gpio_in(cpudev,

ARM_CPU_FIQ));

Quoted 2 lines
(quoted diff) +2 -0
+        sysbus_connect_irq(gicbusdev, i + 2 * sc->num_cpus,
+                           qdev_get_gpio_in(cpudev,
Quoted 10 lines
Quoted 7 lines

ARM_CPU_VIRQ));

Review

Quoted 2 lines
(quoted diff) +2 -0
+        sysbus_connect_irq(gicbusdev, i + 3 * sc->num_cpus,
+                           qdev_get_gpio_in(cpudev,

ARM_CPU_VFIQ));

Your patch was merged around the same time Jinjie added NMI support (see commit b36a32ead1 "target/arm: Add support for Non-maskable

Interrupt").

Quoted 2 lines

Should we add them now?

I referred to this line, https://github.com/qemu/qemu/blob/master/hw/arm/virt.c#L907, in QEMU's virt.c to add NMI support.

Are you suggesting adding the following lines to enable NMI support? It worked as well.

Quoted 6 lines
```
sysbus_connect_irq(gicbusdev, i + 4 * sc->num_cpus,
                    qdev_get_gpio_in(cpudev, ARM_CPU_NMI));
sysbus_connect_irq(gicbusdev, i + 5 * sc->num_cpus,
                    qdev_get_gpio_in(cpudev, ARM_CPU_VINMI));
```

Yes, correct!

Thanks.

#26 lore raw

RE: [PATCH v5 13/17] aspeed/soc: Add AST2700 support

Hi Philippe,

Quoted 171 lines

From: Philippe Mathieu-Daudé <[email protected]>
Sent: Tuesday, February 4, 2025 12:41 AM
To: Jamin Lin <[email protected]>; Cédric Le Goater <[email protected]>; Peter Maydell <[email protected]>; Andrew Jeffery <[email protected]>; Joel Stanley <[email protected]>; Alistair Francis <[email protected]>; Cleber Rosa <[email protected]>; Wainer dos Santos Moschetta <[email protected]>; Beraldo Leal <[email protected]>; open list:ASPEED BMCs <[email protected]>; open list:All patches CC here <[email protected]>; Jinjie Ruan <[email protected]>
Cc: Troy Lee <[email protected]>; Yunlin Tang <[email protected]>
Subject: Re: [PATCH v5 13/17] aspeed/soc: Add AST2700 support

Quoted 46 lines · Jamin Lin

Hi Philippe,

Quoted 44 lines

From: Jamin Lin
Sent: Monday, February 3, 2025 3:29 PM
To: Philippe Mathieu-Daudé <[email protected]>; Cédric Le Goater <[email protected]>; Peter Maydell <[email protected]>; Andrew Jeffery <[email protected]>; Joel Stanley <[email protected]>; Alistair Francis <[email protected]>; Cleber Rosa <[email protected]>; Wainer dos Santos Moschetta <[email protected]>; Beraldo Leal <[email protected]>; open list:ASPEED BMCs <[email protected]>; open list:All patches CC here <[email protected]>; Jinjie Ruan <[email protected]>
Cc: Troy Lee <[email protected]>; Yunlin Tang <[email protected]>
Subject: RE: [PATCH v5 13/17] aspeed/soc: Add AST2700 support

Hi Philippe,

Quoted 7 lines

From: Philippe Mathieu-Daudé <[email protected]>
Sent: Thursday, January 30, 2025 11:14 PM
To: Jamin Lin <[email protected]>; Cédric Le Goater <[email protected]>; Peter Maydell <[email protected]>; Andrew Jeffery <[email protected]>; Joel Stanley <[email protected]>; Alistair Francis <[email protected]>; Cleber Rosa <[email protected]>; Wainer dos Santos Moschetta

<[email protected]>;

Quoted 20 lines

Beraldo Leal <[email protected]>; open list:ASPEED BMCs <[email protected]>; open list:All patches CC here <[email protected]>; Jinjie Ruan <[email protected]>
Cc: Troy Lee <[email protected]>; Yunlin Tang <[email protected]>
Subject: Re: [PATCH v5 13/17] aspeed/soc: Add AST2700 support

Hi Jamin,

Quoted 2 lines · Jamin Lin

Initial definitions for a simple machine using an AST2700 SOC (Cortex-a35

CPU).

Quoted 7 lines

AST2700 SOC and its interrupt controller are too complex to handle in the common Aspeed SoC framework. We introduce a new ast2700 class with instance_init and realize handlers.

AST2700 is a 64 bits quad core cpus and support 8 watchdog. Update maximum ASPEED_CPUS_NUM to 4 and ASPEED_WDTS_NUM to

8.

Quoted 10 lines
Quoted 10 lines
Quoted 10 lines
Quoted 10 lines

In addition, update AspeedSocState to support scuio, sli, sliio and intc.

Add TYPE_ASPEED27X0_SOC machine type.

The SDMC controller is unlocked at SPL stage.
At present, only supports to emulate booting start from u-boot stage. Set SDMC controller unlocked by default.

In INTC, each interrupt of INT 128 to INT 136 combines 32 interrupts. It connect GICINT IRQ GPIO-OUTPUT pins to GIC device with irq 128 to

136.

Quoted 31 lines
Quoted 31 lines
Quoted 31 lines
Quoted 7 lines

And, if a device irq is 128 to 136, its irq GPIO-OUTPUT pin is connected to GICINT or-gates instead of GIC device.

---
   hw/arm/aspeed_ast27x0.c     | 563

++++++++++++++++++++++++++++++++++++

Quoted 23 lines
   hw/arm/meson.build          |   1 +
   include/hw/arm/aspeed_soc.h |  28 +-
   3 files changed, 590 insertions(+), 2 deletions(-)

create mode 100644 hw/arm/aspeed_ast27x0.c

hw/arm/aspeed_ast27x0.c new file +17 -0
+static bool aspeed_soc_ast2700_gic_realize(DeviceState *dev, Error
+**errp) {
+    Aspeed27x0SoCState *a = ASPEED27X0_SOC(dev);
+    AspeedSoCState *s = ASPEED_SOC(dev);
+    AspeedSoCClass *sc = ASPEED_SOC_GET_CLASS(s);
+    SysBusDevice *gicbusdev;
+    DeviceState *gicdev;
+    QList *redist_region_count;
+    int i;
+
+    gicbusdev = SYS_BUS_DEVICE(&a->gic);
+    gicdev = DEVICE(&a->gic);
+    qdev_prop_set_uint32(gicdev, "revision", 3);
+    qdev_prop_set_uint32(gicdev, "num-cpu", sc->num_cpus);
+    qdev_prop_set_uint32(gicdev, "num-irq", AST2700_MAX_IRQ);
+
+    redist_region_count = qlist_new();
Quoted 8 lines
Quoted 8 lines
Quoted 8 lines

hw/arm/aspeed_ast27x0.c

Quoted 8 lines
hw/arm/aspeed_ast27x0.c new file +8 -0
+    qlist_append_int(redist_region_count, sc->num_cpus);
+    qdev_prop_set_array(gicdev, "redist-region-count",
+ redist_region_count);
+
+    if (!sysbus_realize(gicbusdev, errp)) {
+        return false;
+    }
+    sysbus_mmio_map(gicbusdev, 0,

sc->memmap[ASPEED_GIC_DIST]);

Quoted 45 lines
Quoted 45 lines
Quoted 1 line
Quoted 1 line

+ sysbus_mmio_map(gicbusdev, 1,

sc->memmap[ASPEED_GIC_REDIST]);

Quoted 5 lines

hw/arm/aspeed_ast27x0.c

Quoted 4 lines
hw/arm/aspeed_ast27x0.c new file +4 -0
+
+    for (i = 0; i < sc->num_cpus; i++) {
+        DeviceState *cpudev = DEVICE(&a->cpu[i]);
+        int NUM_IRQS = 256, ARCH_GIC_MAINT_IRQ = 9,

VIRTUAL_PMU_IRQ = 7;

Quoted 13 lines

hw/arm/aspeed_ast27x0.c

Quoted 13 lines
hw/arm/aspeed_ast27x0.c new file +13 -0
+        int ppibase = NUM_IRQS + i * GIC_INTERNAL + GIC_NR_SGIS;
+
+        const int timer_irq[] = {
+            [GTIMER_PHYS] = 14,
+            [GTIMER_VIRT] = 11,
+            [GTIMER_HYP]  = 10,
+            [GTIMER_SEC]  = 13,
+        };
+        int j;
+
+        for (j = 0; j < ARRAY_SIZE(timer_irq); j++) {
+            qdev_connect_gpio_out(cpudev, j,
+                    qdev_get_gpio_in(gicdev, ppibase +

timer_irq[j]));

Quoted 24 lines

hw/arm/aspeed_ast27x0.c

Quoted 4 lines
hw/arm/aspeed_ast27x0.c new file +4 -0
+        }
+
+        qemu_irq irq = qdev_get_gpio_in(gicdev,
+                                        ppibase +

ARCH_GIC_MAINT_IRQ);

Quoted 1 line

+ qdev_connect_gpio_out_named(cpudev,

"gicv3-maintenance-interrupt",

hw/arm/aspeed_ast27x0.c

Quoted 3 lines
hw/arm/aspeed_ast27x0.c new file +3 -0
+                                    0, irq);
+        qdev_connect_gpio_out_named(cpudev, "pmu-interrupt", 0,
+                qdev_get_gpio_in(gicdev, ppibase +

VIRTUAL_PMU_IRQ));

Review

Quoted 2 lines
(quoted diff) +2 -0
+
+        sysbus_connect_irq(gicbusdev, i, qdev_get_gpio_in(cpudev,

ARM_CPU_IRQ));

Review

Quoted 2 lines
(quoted diff) +2 -0
+        sysbus_connect_irq(gicbusdev, i + sc->num_cpus,
+                           qdev_get_gpio_in(cpudev,

ARM_CPU_FIQ));

Review

Quoted 2 lines
(quoted diff) +2 -0
+        sysbus_connect_irq(gicbusdev, i + 2 * sc->num_cpus,
+                           qdev_get_gpio_in(cpudev,

ARM_CPU_VIRQ));

Review

Quoted 2 lines
(quoted diff) +2 -0
+        sysbus_connect_irq(gicbusdev, i + 3 * sc->num_cpus,
+                           qdev_get_gpio_in(cpudev,

ARM_CPU_VFIQ));

Quoted 7 lines
Quoted 5 lines
Quoted 2 lines

Your patch was merged around the same time Jinjie added NMI support (see commit b36a32ead1 "target/arm: Add support for Non-maskable

Interrupt").

Quoted 2 lines

Should we add them now?

I referred to this line,

https://github.com/qemu/qemu/blob/master/hw/arm/virt.c#L907, in QEMU's virt.c to add NMI support.

Quoted 4 lines

Are you suggesting adding the following lines to enable NMI support? It worked as well.

Quoted 8 lines
Quoted 5 lines

```
sysbus_connect_irq(gicbusdev, i + 4 * sc->num_cpus,

                    qdev_get_gpio_in(cpudev, ARM_CPU_NMI));
sysbus_connect_irq(gicbusdev, i + 5 * sc->num_cpus,
                    qdev_get_gpio_in(cpudev, ARM_CPU_VINMI)); ```

Yes, correct!

Thanks for suggestion.
Will send patch to support NMI for AST2700

Jamin

Quoted 1 line

Thanks.

#27 lore raw

PATCH v5 17/17 docs:aspeed: Add AST2700 Evaluation board

In reply to Jamin Lin via

Add AST2700 Evaluation board and its boot command.

---
 docs/system/arm/aspeed.rst | 39 ++++++++++++++++++++++++++++++++++----
 1 file changed, 35 insertions(+), 4 deletions(-)
docs/system/arm/aspeed.rst +35 -4
index b2dea54eed..cd9559e3e2 100644
@@ -1,11 +1,12 @@
-Aspeed family boards (``*-bmc``, ``ast2500-evb``, ``ast2600-evb``)
-==================================================================
+Aspeed family boards (``*-bmc``, ``ast2500-evb``, ``ast2600-evb``, ``ast2700-evb``)
+===================================================================================
 
 The QEMU Aspeed machines model BMCs of various OpenPOWER systems and
 Aspeed evaluation boards. They are based on different releases of the
 Aspeed SoC : the AST2400 integrating an ARM926EJ-S CPU (400MHz), the
-AST2500 with an ARM1176JZS CPU (800MHz) and more recently the AST2600
-with dual cores ARM Cortex-A7 CPUs (1.2GHz).
+AST2500 with an ARM1176JZS CPU (800MHz), the AST2600
+with dual cores ARM Cortex-A7 CPUs (1.2GHz) and more recently the AST2700
+with quad cores ARM Cortex-A35 64 bits CPUs (1.6GHz)
 
 The SoC comes with RAM, Gigabit ethernet, USB, SD/MMC, USB, SPI, I2C,
 etc.
@@ -38,6 +39,10 @@ AST2600 SoC based machines :
 - ``qcom-dc-scm-v1-bmc``   Qualcomm DC-SCM V1 BMC
 - ``qcom-firework-bmc``    Qualcomm Firework BMC
 
+AST2700 SoC based machines :
+
+- ``ast2700-evb``          Aspeed AST2700 Evaluation board (Cortex-A35)
+
 Supported devices
 -----------------
 
@@ -66,6 +71,7 @@ Supported devices
  * eMMC Boot Controller (dummy)
  * PECI Controller (minimal)
  * I3C Controller
+ * Internal Bridge Controller (SLI dummy)
 
 
 Missing devices
@@ -95,6 +101,10 @@ or directly from the OpenBMC GitHub release repository :
 
    https://github.com/openbmc/openbmc/releases
 
+or directly from the ASPEED Forked OpenBMC GitHub release repository :
+
+   https://github.com/AspeedTech-BMC/openbmc/releases
+
 To boot a kernel directly from a Linux build tree:
 
 .. code-block:: bash
@@ -164,6 +174,27 @@ under Linux), use :
 
   -M ast2500-evb,bmc-console=uart3
 
+
+Boot the AST2700 machine from the flash image, use an MTD drive :
+
+.. code-block:: bash
+
+  IMGDIR=ast2700-default
+  UBOOT_SIZE=$(stat --format=%s -L ${IMGDIR}/u-boot-nodtb.bin)
+
+  $ qemu-system-aarch64 -M ast2700-evb \
+       -device loader,force-raw=on,addr=0x400000000,file=${IMGDIR}/u-boot-nodtb.bin \
+       -device loader,force-raw=on,addr=$((0x400000000 + ${UBOOT_SIZE})),file=${IMGDIR}/u-boot.dtb \
+       -device loader,force-raw=on,addr=0x430000000,file=${IMGDIR}/bl31.bin \
+       -device loader,force-raw=on,addr=0x430080000,file=${IMGDIR}/optee/tee-raw.bin \
+       -device loader,cpu-num=0,addr=0x430000000 \
+       -device loader,cpu-num=1,addr=0x430000000 \
+       -device loader,cpu-num=2,addr=0x430000000 \
+       -device loader,cpu-num=3,addr=0x430000000 \
+       -smp 4 \
+       -drive file=${IMGDIR}/image-bmc,format=raw,if=mtd \
+       -nographic
+
 Aspeed minibmc family boards (``ast1030-evb``)
 ==================================================================
 
Signature · 1 line
2.25.1
#28 lore raw

PATCH v5 16/17 test/avocado/machine_aspeed.py: Add AST2700 test case

In reply to Jamin Lin via

Add a test case to test Aspeed OpenBMC SDK v09.01 on AST2700 board.

It loads u-boot-nodtb.bin, u-boot.dtb, tfa and optee-os images to dram first which base address is 0x400000000. Then, boot and launch 4 cpu cores.

```
qemu-system-aarch64 -machine ast2700-evb
    -device loader,force-raw=on,addr=0x400000000,file=workdir/u-boot-nodtb.bin \
    -device loader,force-raw=on,addr=uboot_dtb_load_addr,file=workdir/u-boot.dtb\
    -device loader,force-raw=on,addr=0x430000000,file=workdir/bl31.bin\
    -device loader,force-raw=on,addr=0x430080000,file=workdir/optee/tee-raw.bin\
    -device loader,cpu-num=0,addr=0x430000000 \
    -device loader,cpu-num=1,addr=0x430000000 \
    -device loader,cpu-num=2,addr=0x430000000 \
    -device loader,cpu-num=3,addr=0x430000000 \
    -smp 4 \
    -drive file=workdir/image-bmc,format=raw,if=mtd
```

A test image is downloaded from the ASPEED Forked OpenBMC GitHub release repository :
https://github.com/AspeedTech-BMC/openbmc/releases/

---
 tests/avocado/machine_aspeed.py | 62 +++++++++++++++++++++++++++++++++
 1 file changed, 62 insertions(+)
tests/avocado/machine_aspeed.py +62 -0
index cec0181424..3a20644fb2 100644
@@ -311,6 +311,17 @@ def do_test_arm_aspeed_sdk_start(self, image):
             self, 'boot', '## Loading kernel from FIT Image')
         self.wait_for_console_pattern('Starting kernel ...')
 
+    def do_test_aarch64_aspeed_sdk_start(self, image):
+        self.vm.set_console()
+        self.vm.add_args('-drive', 'file=' + image + ',if=mtd,format=raw')
+
+        self.vm.launch()
+
+        self.wait_for_console_pattern('U-Boot 2023.10')
+        self.wait_for_console_pattern('## Loading kernel from FIT Image')
+        self.wait_for_console_pattern('Starting kernel ...')
+        self.wait_for_console_pattern("systemd[1]: Hostname set to")
+
     @skipUnless(os.getenv('QEMU_TEST_FLAKY_TESTS'), 'Test is unstable on GitLab')
 
     def test_arm_ast2500_evb_sdk(self):
@@ -375,3 +386,54 @@ def test_arm_ast2600_evb_sdk(self):
              'i2c i2c-5: new_device: Instantiated device ds1307 at 0x32');
         year = time.strftime("%Y")
         self.ssh_command_output_contains('/sbin/hwclock -f /dev/rtc1', year);
+
+    def test_aarch64_ast2700_evb_sdk_v09_01(self):
+        """
+        :avocado: tags=arch:aarch64
+        :avocado: tags=machine:ast2700-evb
+        """
+
+        image_url = ('https://github.com/AspeedTech-BMC/openbmc/releases/'
+                     'download/v09.01/ast2700-default-obmc.tar.gz')
+        image_hash = 'b1cc0fd73c7650d34c9c8459a243f52a91e9e27144b8608b2645ab19461d1e07'
+        image_path = self.fetch_asset(image_url, asset_hash=image_hash,
+                                      algorithm='sha256')
+        archive.extract(image_path, self.workdir)
+
+        num_cpu = 4
+        image_dir = self.workdir + '/ast2700-default/'
+        uboot_size = os.path.getsize(image_dir + 'u-boot-nodtb.bin')
+        uboot_dtb_load_addr = hex(0x400000000 + uboot_size)
+
+        load_images_list = [
+            {
+                'addr': '0x400000000',
+                'file': image_dir + 'u-boot-nodtb.bin'
+            },
+            {
+                'addr': str(uboot_dtb_load_addr),
+                'file': image_dir + 'u-boot.dtb'
+            },
+            {
+                'addr': '0x430000000',
+                'file': image_dir + 'bl31.bin'
+            },
+            {
+                'addr': '0x430080000',
+                'file': image_dir + 'optee/tee-raw.bin'
+            }
+        ]
+
+        for load_image in load_images_list:
+            addr = load_image['addr']
+            file = load_image['file']
+            self.vm.add_args('-device',
+                             f'loader,force-raw=on,addr={addr},file={file}')
+
+        for i in range(num_cpu):
+            self.vm.add_args('-device',
+                             f'loader,addr=0x430000000,cpu-num={i}')
+
+        self.vm.add_args('-smp', str(num_cpu))
+        self.do_test_aarch64_aspeed_sdk_start(image_dir + 'image-bmc')
+
Signature · 1 line
2.25.1
#29 lore raw
In reply to Jamin Lin via
Quoted 18 lines · Jamin Lin

Changes from v1:
The patch series supports WDT, SDMC, SMC, SCU, SLI and INTC for AST2700 SoC.

Changes from v2:
- replace is_aarch64 with is_bus64bit for sdmc patch review.
- fix incorrect dram size for AST2700

Changes from v3:
- Add AST2700 Evaluation board in ASPEED document
- Add avocado test cases for AST2700 Evaluation board
- Fix reviewers review issues and add reviewers suggestions
- Implement INTC model GICINT 128 to GICINT136 for AST2700

Changes from v4:
- support 64 bits dma dram address associated with review issues
- support dma start length and 1 byte length unit associated with review issues
- refactor intc model to fix serial console stuck issue and associated with review issues

Quoted 10 lines

Changes from v5:
- sdmc: incrementing the version of vmstate to 2.
- smc: support different memory region ops for SMC flash region introduce a new "const MemoryRegionOps *" attribute in AspeedSMCClass and use it in aspeed_smc_flash_realize function.
- intc: fix associated with review issues
- dram size detect: change to use address space API and simplify with write transaction on the DRAM memory region of the SoC.
- ast27x0_soc: update aspeed_soc_ast2700_gic function associated with review issues and rename to aspeed_soc_ast2700_gic_realize

v5 looks good to me.

Do you plan to send a MAINTAINERS file ?

Thanks,

C.

Quoted 83 lines

Test Version:
qemu commit:
https://github.com/qemu/qemu/commit/74abb45dac6979e7ff76172b7f0a24e869405184
applied patch:
https://patchew.org/QEMU/[email protected]/

Test steps:
1. Download the latest openbmc image for AST2700 from AspeedTech-BMC/openbmc repository, https://github.com/AspeedTech-BMC/openbmc/releases/tag/v09.01

2. untar ast2700-default-obmc.tar.gz

    ```
    tar -xf ast2700-default-obmc.tar.gz
    ```

3. Run and the contents of scripts as following IMGDIR=ast2700-default
UBOOT_SIZE=$(stat --format=%s -L ${IMGDIR}/u-boot-nodtb.bin) UBOOT_DTB_ADDR=$((0x400000000 + ${UBOOT_SIZE}))

qemu-system-aarch64 -M ast2700-evb -nographic\
-device loader,addr=0x400000000,file=${IMGDIR}/u-boot-nodtb.bin,force-raw=on\
-device loader,addr=${UBOOT_DTB_ADDR},file=${IMGDIR}/u-boot.dtb,force-raw=on\
-device loader,addr=0x430000000,file=${IMGDIR}/bl31.bin,force-raw=on\
-device loader,addr=0x430080000,file=${IMGDIR}/optee/tee-raw.bin,force-raw=on\
-device loader,addr=0x430000000,cpu-num=0\
-device loader,addr=0x430000000,cpu-num=1\
-device loader,addr=0x430000000,cpu-num=2\
-device loader,addr=0x430000000,cpu-num=3\
-smp 4\
-drive file=${IMGDIR}/image-bmc,format=raw,if=mtd\
-serial mon:stdio\
-snapshot

Jamin Lin (17):
aspeed/wdt: Add AST2700 support
aspeed/sli: Add AST2700 support
aspeed/sdmc: remove redundant macros
aspeed/sdmc: fix coding style
aspeed/sdmc: Add AST2700 support
aspeed/smc: correct device description
aspeed/smc: support dma start length and 1 byte length unit aspeed/smc: support 64 bits dma dram address
aspeed/smc: support different memory region ops for SMC flash region aspeed/smc: Add AST2700 support
aspeed/scu: Add AST2700 support
aspeed/intc: Add AST2700 support
aspeed/soc: Add AST2700 support
aspeed: Add an AST2700 eval board
aspeed/soc: fix incorrect dram size for AST2700 test/avocado/machine_aspeed.py: Add AST2700 test case docs:aspeed: Add AST2700 Evaluation board

  docs/system/arm/aspeed.rst       |  39 +-
  hw/arm/aspeed.c                  |  32 ++
  hw/arm/aspeed_ast27x0.c          | 648 +++++++++++++++++++++++++++++++
  hw/arm/meson.build               |   1 +
  hw/intc/aspeed_intc.c            | 360 +++++++++++++++++
  hw/intc/meson.build              |   1 +
  hw/intc/trace-events             |  13 +
  hw/misc/aspeed_scu.c             | 306 ++++++++++++++-
  hw/misc/aspeed_sdmc.c            | 220 +++++++++--
  hw/misc/aspeed_sli.c             | 177 +++++++++
  hw/misc/meson.build              |   3 +-
  hw/misc/trace-events             |  11 +
  hw/ssi/aspeed_smc.c              | 346 ++++++++++++++++-
  hw/ssi/trace-events              |   2 +-
  hw/watchdog/wdt_aspeed.c         |  24 ++
  include/hw/arm/aspeed_soc.h      |  30 +-
  include/hw/intc/aspeed_intc.h    |  44 +++
  include/hw/misc/aspeed_scu.h     |  47 ++-
  include/hw/misc/aspeed_sdmc.h    |   5 +-
  include/hw/misc/aspeed_sli.h     |  27 ++
  include/hw/ssi/aspeed_smc.h      |   2 +
  include/hw/watchdog/wdt_aspeed.h |   3 +-
  tests/avocado/machine_aspeed.py  |  62 +++
  23 files changed, 2345 insertions(+), 58 deletions(-)

create mode 100644 hw/arm/aspeed_ast27x0.c create mode 100644 hw/intc/aspeed_intc.c create mode 100644 hw/misc/aspeed_sli.c create mode 100644 include/hw/intc/aspeed_intc.h create mode 100644 include/hw/misc/aspeed_sli.h

#30 lore raw

Hi Cedric,

Quoted 44 lines

From: Cédric Le Goater <[email protected]>
Sent: Tuesday, June 4, 2024 7:52 PM
To: Jamin Lin <[email protected]>; Peter Maydell <[email protected]>; Andrew Jeffery <[email protected]>; Joel Stanley <[email protected]>; Alistair Francis <[email protected]>; Cleber Rosa <[email protected]>; Philippe Mathieu-Daudé <[email protected]>; Wainer dos Santos Moschetta <[email protected]>; Beraldo Leal <[email protected]>; open list:ASPEED BMCs <[email protected]>; open list:All patches CC here <[email protected]>
Cc: Troy Lee <[email protected]>; Yunlin Tang <[email protected]>
Subject: Re: [PATCH v5 00/17] Add AST2700 support

Quoted 2 lines · Jamin Lin

Changes from v1:
The patch series supports WDT, SDMC, SMC, SCU, SLI and INTC for AST2700

SoC.

Quoted 18 lines

Changes from v2:
- replace is_aarch64 with is_bus64bit for sdmc patch review.
- fix incorrect dram size for AST2700

Changes from v3:
- Add AST2700 Evaluation board in ASPEED document
- Add avocado test cases for AST2700 Evaluation board
- Fix reviewers review issues and add reviewers suggestions
- Implement INTC model GICINT 128 to GICINT136 for AST2700

Changes from v4:
- support 64 bits dma dram address associated with review issues
- support dma start length and 1 byte length unit associated with review issues
- refactor intc model to fix serial console stuck issue and associated with review issues

Quoted 4 lines

Changes from v5:
- sdmc: incrementing the version of vmstate to 2.
- smc: support different memory region ops for SMC flash region introduce a new "const MemoryRegionOps *" attribute in

AspeedSMCClass and

Quoted 4 lines

use it in aspeed_smc_flash_realize function.
- intc: fix associated with review issues
- dram size detect: change to use address space API and simplify with write transaction on the DRAM memory region of the

Quoted 9 lines

SoC.

Quoted 1 line

- ast27x0_soc: update aspeed_soc_ast2700_gic function associated with

review issues

Quoted 1 line

and rename to aspeed_soc_ast2700_gic_realize

v5 looks good to me.

Do you plan to send a MAINTAINERS file ?

Thanks for your kindly support and appreciate your help. Yes, I am studying MAINTAINERS rules and will send a patch. I will notify you via this email after I send the patch. Thanks-Jamin

Quoted 101 lines

Thanks,

C.

Quoted 4 lines

Test Version:
qemu commit:

https://github.com/qemu/qemu/commit/74abb45dac6979e7ff76172b7f0a24e
869

Quoted 6 lines

405184
applied patch:
https://patchew.org/QEMU/[email protected]/

Test steps:
1. Download the latest openbmc image for AST2700 from

AspeedTech-BMC/openbmc

Quoted 1 line

repository,

https://github.com/AspeedTech-BMC/openbmc/releases/tag/v09.01

Quoted 2 lines

link:

https://github.com/AspeedTech-BMC/openbmc/releases/download/v09.01/ast

Quoted 11 lines

2700-default-obmc.tar.gz
2. untar ast2700-default-obmc.tar.gz

    ```
    tar -xf ast2700-default-obmc.tar.gz
    ```

3. Run and the contents of scripts as following IMGDIR=ast2700-default UBOOT_SIZE=$(stat --format=%s -L ${IMGDIR}/u-boot-nodtb.bin) UBOOT_DTB_ADDR=$((0x400000000 + ${UBOOT_SIZE}))

qemu-system-aarch64 -M ast2700-evb -nographic\
-device

loader,addr=0x400000000,file=${IMGDIR}/u-boot-nodtb.bin,force-raw=on\

Quoted 1 line

-device

loader,addr=${UBOOT_DTB_ADDR},file=${IMGDIR}/u-boot.dtb,force-raw=on\

Quoted 2 lines
  -device loader,addr=0x430000000,file=${IMGDIR}/bl31.bin,force-raw=on\
  -device

loader,addr=0x430080000,file=${IMGDIR}/optee/tee-raw.bin,force-raw=on\

Quoted 28 lines
  -device loader,addr=0x430000000,cpu-num=0\
  -device loader,addr=0x430000000,cpu-num=1\
  -device loader,addr=0x430000000,cpu-num=2\
  -device loader,addr=0x430000000,cpu-num=3\
  -smp 4\
  -drive file=${IMGDIR}/image-bmc,format=raw,if=mtd\
  -serial mon:stdio\
  -snapshot

Jamin Lin (17):
aspeed/wdt: Add AST2700 support
aspeed/sli: Add AST2700 support
aspeed/sdmc: remove redundant macros
aspeed/sdmc: fix coding style
aspeed/sdmc: Add AST2700 support
aspeed/smc: correct device description
aspeed/smc: support dma start length and 1 byte length unit aspeed/smc: support 64 bits dma dram address
aspeed/smc: support different memory region ops for SMC flash region aspeed/smc: Add AST2700 support
aspeed/scu: Add AST2700 support
aspeed/intc: Add AST2700 support
aspeed/soc: Add AST2700 support
aspeed: Add an AST2700 eval board
aspeed/soc: fix incorrect dram size for AST2700 test/avocado/machine_aspeed.py: Add AST2700 test case docs:aspeed: Add AST2700 Evaluation board

Quoted 3 lines
  docs/system/arm/aspeed.rst       |  39 +-
  hw/arm/aspeed.c                  |  32 ++
  hw/arm/aspeed_ast27x0.c          | 648

+++++++++++++++++++++++++++++++

Quoted 27 lines
  hw/arm/meson.build               |   1 +
  hw/intc/aspeed_intc.c            | 360 +++++++++++++++++
  hw/intc/meson.build              |   1 +
  hw/intc/trace-events             |  13 +
  hw/misc/aspeed_scu.c             | 306 ++++++++++++++-
  hw/misc/aspeed_sdmc.c            | 220 +++++++++--
  hw/misc/aspeed_sli.c             | 177 +++++++++
  hw/misc/meson.build              |   3 +-
  hw/misc/trace-events             |  11 +
  hw/ssi/aspeed_smc.c              | 346 ++++++++++++++++-
  hw/ssi/trace-events              |   2 +-
  hw/watchdog/wdt_aspeed.c         |  24 ++
  include/hw/arm/aspeed_soc.h      |  30 +-
  include/hw/intc/aspeed_intc.h    |  44 +++
  include/hw/misc/aspeed_scu.h     |  47 ++-
  include/hw/misc/aspeed_sdmc.h    |   5 +-
  include/hw/misc/aspeed_sli.h     |  27 ++
  include/hw/ssi/aspeed_smc.h      |   2 +
  include/hw/watchdog/wdt_aspeed.h |   3 +-
  tests/avocado/machine_aspeed.py  |  62 +++
  23 files changed, 2345 insertions(+), 58 deletions(-)

create mode 100644 hw/arm/aspeed_ast27x0.c create mode 100644 hw/intc/aspeed_intc.c create mode 100644 hw/misc/aspeed_sli.c create mode 100644 include/hw/intc/aspeed_intc.h create mode 100644 include/hw/misc/aspeed_sli.h

#31 lore raw
In reply to Jamin Lin via
Quoted 105 lines · Jamin Lin

Changes from v1:
The patch series supports WDT, SDMC, SMC, SCU, SLI and INTC for AST2700 SoC.

Changes from v2:
- replace is_aarch64 with is_bus64bit for sdmc patch review.
- fix incorrect dram size for AST2700

Changes from v3:
- Add AST2700 Evaluation board in ASPEED document
- Add avocado test cases for AST2700 Evaluation board
- Fix reviewers review issues and add reviewers suggestions
- Implement INTC model GICINT 128 to GICINT136 for AST2700

Changes from v4:
- support 64 bits dma dram address associated with review issues
- support dma start length and 1 byte length unit associated with review issues
- refactor intc model to fix serial console stuck issue and associated with review issues

Changes from v5:
- sdmc: incrementing the version of vmstate to 2.
- smc: support different memory region ops for SMC flash region introduce a new "const MemoryRegionOps *" attribute in AspeedSMCClass and use it in aspeed_smc_flash_realize function.
- intc: fix associated with review issues
- dram size detect: change to use address space API and simplify with write transaction on the DRAM memory region of the SoC.
- ast27x0_soc: update aspeed_soc_ast2700_gic function associated with review issues and rename to aspeed_soc_ast2700_gic_realize

Test Version:
qemu commit:
https://github.com/qemu/qemu/commit/74abb45dac6979e7ff76172b7f0a24e869405184
applied patch:
https://patchew.org/QEMU/[email protected]/

Test steps:
1. Download the latest openbmc image for AST2700 from AspeedTech-BMC/openbmc repository, https://github.com/AspeedTech-BMC/openbmc/releases/tag/v09.01

2. untar ast2700-default-obmc.tar.gz

    ```
    tar -xf ast2700-default-obmc.tar.gz
    ```

3. Run and the contents of scripts as following IMGDIR=ast2700-default
UBOOT_SIZE=$(stat --format=%s -L ${IMGDIR}/u-boot-nodtb.bin) UBOOT_DTB_ADDR=$((0x400000000 + ${UBOOT_SIZE}))

qemu-system-aarch64 -M ast2700-evb -nographic\
-device loader,addr=0x400000000,file=${IMGDIR}/u-boot-nodtb.bin,force-raw=on\
-device loader,addr=${UBOOT_DTB_ADDR},file=${IMGDIR}/u-boot.dtb,force-raw=on\
-device loader,addr=0x430000000,file=${IMGDIR}/bl31.bin,force-raw=on\
-device loader,addr=0x430080000,file=${IMGDIR}/optee/tee-raw.bin,force-raw=on\
-device loader,addr=0x430000000,cpu-num=0\
-device loader,addr=0x430000000,cpu-num=1\
-device loader,addr=0x430000000,cpu-num=2\
-device loader,addr=0x430000000,cpu-num=3\
-smp 4\
-drive file=${IMGDIR}/image-bmc,format=raw,if=mtd\
-serial mon:stdio\
-snapshot

Jamin Lin (17):
aspeed/wdt: Add AST2700 support
aspeed/sli: Add AST2700 support
aspeed/sdmc: remove redundant macros
aspeed/sdmc: fix coding style
aspeed/sdmc: Add AST2700 support
aspeed/smc: correct device description
aspeed/smc: support dma start length and 1 byte length unit aspeed/smc: support 64 bits dma dram address
aspeed/smc: support different memory region ops for SMC flash region aspeed/smc: Add AST2700 support
aspeed/scu: Add AST2700 support
aspeed/intc: Add AST2700 support
aspeed/soc: Add AST2700 support
aspeed: Add an AST2700 eval board
aspeed/soc: fix incorrect dram size for AST2700 test/avocado/machine_aspeed.py: Add AST2700 test case docs:aspeed: Add AST2700 Evaluation board

  docs/system/arm/aspeed.rst       |  39 +-
  hw/arm/aspeed.c                  |  32 ++
  hw/arm/aspeed_ast27x0.c          | 648 +++++++++++++++++++++++++++++++
  hw/arm/meson.build               |   1 +
  hw/intc/aspeed_intc.c            | 360 +++++++++++++++++
  hw/intc/meson.build              |   1 +
  hw/intc/trace-events             |  13 +
  hw/misc/aspeed_scu.c             | 306 ++++++++++++++-
  hw/misc/aspeed_sdmc.c            | 220 +++++++++--
  hw/misc/aspeed_sli.c             | 177 +++++++++
  hw/misc/meson.build              |   3 +-
  hw/misc/trace-events             |  11 +
  hw/ssi/aspeed_smc.c              | 346 ++++++++++++++++-
  hw/ssi/trace-events              |   2 +-
  hw/watchdog/wdt_aspeed.c         |  24 ++
  include/hw/arm/aspeed_soc.h      |  30 +-
  include/hw/intc/aspeed_intc.h    |  44 +++
  include/hw/misc/aspeed_scu.h     |  47 ++-
  include/hw/misc/aspeed_sdmc.h    |   5 +-
  include/hw/misc/aspeed_sli.h     |  27 ++
  include/hw/ssi/aspeed_smc.h      |   2 +
  include/hw/watchdog/wdt_aspeed.h |   3 +-
  tests/avocado/machine_aspeed.py  |  62 +++
  23 files changed, 2345 insertions(+), 58 deletions(-)
Quoted 6 lines

create mode 100644 hw/arm/aspeed_ast27x0.c create mode 100644 hw/intc/aspeed_intc.c create mode 100644 hw/misc/aspeed_sli.c create mode 100644 include/hw/intc/aspeed_intc.h create mode 100644 include/hw/misc/aspeed_sli.h

Applied to aspeed-next.

Thanks,

C.