Skip to contentSkip to conversation

ice: prepare representor for SF support

PATCH In review Michal Swiatkowski 2 participants 11 messages Jun 10, 2024 – Jun 21, 2024

Subsystems (3)
lore
Share & tools
lore
#0 lore raw

v3 cover ice: prepare representor for SF support

Hi,

This is a series to prepare port representor for supporting also subfunctions. We need correct devlink locking and the possibility to update parent VSI after port representor is created.

Refactor how devlink lock is taken to suite the subfunction use case.

VSI configuration needs to be done after port representor is created. Port representor needs only allocated VSI. It doesn't need to be configured before.

VSI needs to be reconfigured when update function is called.

The code for this patchset was split from (too big) patchset [1].

v2 --> v3 [3]:
* delete ice_repr_get_by_vsi() from header
* rephrase commit message in moving devlink locking

v1 --> v2 [2]:
* add returns for kdoc in ice_eswitch_cfg_vsi

[1] https://lore.kernel.org/netdev/[email protected]/
[2] https://lore.kernel.org/netdev/[email protected]/
[3] https://lore.kernel.org/netdev/[email protected]/

Michal Swiatkowski (4):
ice: store representor ID in bridge port
ice: move devlink locking outside the port creation
ice: move VSI configuration outside repr setup
ice: update representor when VSI is ready

 .../net/ethernet/intel/ice/devlink/devlink.c  |  2 -
 .../ethernet/intel/ice/devlink/devlink_port.c |  4 +-
 drivers/net/ethernet/intel/ice/ice_eswitch.c  | 85 +++++++++++++------
 drivers/net/ethernet/intel/ice/ice_eswitch.h  | 14 ++-
 .../net/ethernet/intel/ice/ice_eswitch_br.c   |  4 +-
 .../net/ethernet/intel/ice/ice_eswitch_br.h   |  1 +
 drivers/net/ethernet/intel/ice/ice_repr.c     | 16 ++--
 drivers/net/ethernet/intel/ice/ice_repr.h     |  1 +
 drivers/net/ethernet/intel/ice/ice_vf_lib.c   |  2 +-
 9 files changed, 90 insertions(+), 39 deletions(-)
Signature · 1 line
2.42.0
#1 lore raw

PATCH v3 1/4 ice: store representor ID in bridge port

It is used to get representor structure during cleaning.

---
 drivers/net/ethernet/intel/ice/ice_eswitch_br.c | 4 +++-
 drivers/net/ethernet/intel/ice/ice_eswitch_br.h | 1 +
 drivers/net/ethernet/intel/ice/ice_repr.c       | 7 ++-----
 drivers/net/ethernet/intel/ice/ice_repr.h       | 1 +
 4 files changed, 7 insertions(+), 6 deletions(-)
drivers/net/ethernet/intel/ice/ice_eswitch_br.c +3 -1
index ac5beecd028b..f5aceb32bf4d 100644
@@ -896,7 +896,8 @@ ice_eswitch_br_port_deinit(struct ice_esw_br *bridge,
 	if (br_port->type == ICE_ESWITCH_BR_UPLINK_PORT && vsi->back) {
 		vsi->back->br_port = NULL;
 	} else {
-		struct ice_repr *repr = ice_repr_get_by_vsi(vsi);
+		struct ice_repr *repr =
+			ice_repr_get(vsi->back, br_port->repr_id);
 
 		if (repr)
 			repr->br_port = NULL;
@@ -937,6 +938,7 @@ ice_eswitch_br_vf_repr_port_init(struct ice_esw_br *bridge,
 	br_port->vsi = repr->src_vsi;
 	br_port->vsi_idx = br_port->vsi->idx;
 	br_port->type = ICE_ESWITCH_BR_VF_REPR_PORT;
+	br_port->repr_id = repr->id;
 	repr->br_port = br_port;
 
 	err = xa_insert(&bridge->ports, br_port->vsi_idx, br_port, GFP_KERNEL);
drivers/net/ethernet/intel/ice/ice_eswitch_br.h +1 -0
index 85a8fadb2928..c15c7344d7f8 100644
@@ -46,6 +46,7 @@ struct ice_esw_br_port {
 	enum ice_esw_br_port_type type;
 	u16 vsi_idx;
 	u16 pvid;
+	u32 repr_id;
 	struct xarray vlans;
 };
 
drivers/net/ethernet/intel/ice/ice_repr.c +2 -5
index d367f4c66dcd..fe83f305cc7d 100644
@@ -415,12 +415,9 @@ struct ice_repr *ice_repr_add_vf(struct ice_vf *vf)
 	return ERR_PTR(err);
 }
 
-struct ice_repr *ice_repr_get_by_vsi(struct ice_vsi *vsi)
+struct ice_repr *ice_repr_get(struct ice_pf *pf, u32 id)
 {
-	if (!vsi->vf)
-		return NULL;
-
-	return xa_load(&vsi->back->eswitch.reprs, vsi->vf->repr_id);
+	return xa_load(&pf->eswitch.reprs, id);
 }
 
 /**
drivers/net/ethernet/intel/ice/ice_repr.h +1 -0
index cff730b15ca0..07842620d7a2 100644
@@ -40,4 +40,5 @@ struct ice_repr *ice_repr_get_by_vsi(struct ice_vsi *vsi);
 void ice_repr_inc_tx_stats(struct ice_repr *repr, unsigned int len,
 			   int xmit_status);
 void ice_repr_inc_rx_stats(struct net_device *netdev, unsigned int len);
+struct ice_repr *ice_repr_get(struct ice_pf *pf, u32 id);
 #endif
Signature · 1 line
2.42.0
#3 lore raw

PATCH v3 2/4 ice: move devlink locking outside the port creation

In reply to Michal Swiatkowski

In case of subfunction lock will be taken for whole port creation and removing. Do the same in VF case.

---
 drivers/net/ethernet/intel/ice/devlink/devlink.c      | 2 --
 drivers/net/ethernet/intel/ice/devlink/devlink_port.c | 4 ++--
 drivers/net/ethernet/intel/ice/ice_eswitch.c          | 9 +++++++--
 drivers/net/ethernet/intel/ice/ice_repr.c             | 2 --
 4 files changed, 9 insertions(+), 8 deletions(-)
drivers/net/ethernet/intel/ice/devlink/devlink.c +0 -2
index 704e9ad5144e..f774781ab514 100644
@@ -794,10 +794,8 @@ int ice_devlink_rate_init_tx_topology(struct devlink *devlink, struct ice_vsi *v
 
 	tc_node = pi->root->children[0];
 	mutex_lock(&pi->sched_lock);
-	devl_lock(devlink);
 	for (i = 0; i < tc_node->num_children; i++)
 		ice_traverse_tx_tree(devlink, tc_node->children[i], tc_node, pf);
-	devl_unlock(devlink);
 	mutex_unlock(&pi->sched_lock);
 
 	return 0;
drivers/net/ethernet/intel/ice/devlink/devlink_port.c +2 -2
index 13e6790d3cae..c9fbeebf7fb9 100644
@@ -407,7 +407,7 @@ int ice_devlink_create_vf_port(struct ice_vf *vf)
 	devlink_port_attrs_set(devlink_port, &attrs);
 	devlink = priv_to_devlink(pf);
 
-	err = devlink_port_register(devlink, devlink_port, vsi->idx);
+	err = devl_port_register(devlink, devlink_port, vsi->idx);
 	if (err) {
 		dev_err(dev, "Failed to create devlink port for VF %d, error %d\n",
 			vf->vf_id, err);
@@ -426,5 +426,5 @@ int ice_devlink_create_vf_port(struct ice_vf *vf)
 void ice_devlink_destroy_vf_port(struct ice_vf *vf)
 {
 	devl_rate_leaf_destroy(&vf->devlink_port);
-	devlink_port_unregister(&vf->devlink_port);
+	devl_port_unregister(&vf->devlink_port);
 }
drivers/net/ethernet/intel/ice/ice_eswitch.c +7 -2
index b102db8b829a..7b57a6561a5a 100644
@@ -423,6 +423,7 @@ static void ice_eswitch_start_reprs(struct ice_pf *pf)
 int
 ice_eswitch_attach(struct ice_pf *pf, struct ice_vf *vf)
 {
+	struct devlink *devlink = priv_to_devlink(pf);
 	struct ice_repr *repr;
 	int err;
 
@@ -437,7 +438,9 @@ ice_eswitch_attach(struct ice_pf *pf, struct ice_vf *vf)
 
 	ice_eswitch_stop_reprs(pf);
 
+	devl_lock(devlink);
 	repr = ice_repr_add_vf(vf);
+	devl_unlock(devlink);
 	if (IS_ERR(repr)) {
 		err = PTR_ERR(repr);
 		goto err_create_repr;
@@ -460,7 +463,9 @@ ice_eswitch_attach(struct ice_pf *pf, struct ice_vf *vf)
 err_xa_alloc:
 	ice_eswitch_release_repr(pf, repr);
 err_setup_repr:
+	devl_lock(devlink);
 	ice_repr_rem_vf(repr);
+	devl_unlock(devlink);
 err_create_repr:
 	if (xa_empty(&pf->eswitch.reprs))
 		ice_eswitch_disable_switchdev(pf);
@@ -484,6 +489,7 @@ void ice_eswitch_detach(struct ice_pf *pf, struct ice_vf *vf)
 		ice_eswitch_disable_switchdev(pf);
 
 	ice_eswitch_release_repr(pf, repr);
+	devl_lock(devlink);
 	ice_repr_rem_vf(repr);
 
 	if (xa_empty(&pf->eswitch.reprs)) {
@@ -491,12 +497,11 @@ void ice_eswitch_detach(struct ice_pf *pf, struct ice_vf *vf)
 		 * no point in keeping the nodes
 		 */
 		ice_devlink_rate_clear_tx_topology(ice_get_main_vsi(pf));
-		devl_lock(devlink);
 		devl_rate_nodes_destroy(devlink);
-		devl_unlock(devlink);
 	} else {
 		ice_eswitch_start_reprs(pf);
 	}
+	devl_unlock(devlink);
 }
 
 /**
drivers/net/ethernet/intel/ice/ice_repr.c +0 -2
index fe83f305cc7d..35a6ac8c0466 100644
@@ -285,9 +285,7 @@ ice_repr_reg_netdev(struct net_device *netdev)
 
 static void ice_repr_remove_node(struct devlink_port *devlink_port)
 {
-	devl_lock(devlink_port->devlink);
 	devl_rate_leaf_destroy(devlink_port);
-	devl_unlock(devlink_port->devlink);
 }
 
 /**
Signature · 1 line
2.42.0
#5 lore raw

PATCH v3 3/4 ice: move VSI configuration outside repr setup

In reply to Michal Swiatkowski

It is needed because subfunction port representor shouldn't configure the source VSI during representor creation.

Move the code to separate function and call it only in case the VF port representor is being created.

---
 drivers/net/ethernet/intel/ice/ice_eswitch.c | 55 ++++++++++++++------
 drivers/net/ethernet/intel/ice/ice_eswitch.h | 10 ++++
 drivers/net/ethernet/intel/ice/ice_repr.c    |  7 +++
 3 files changed, 57 insertions(+), 15 deletions(-)
drivers/net/ethernet/intel/ice/ice_eswitch.c +40 -15
index 7b57a6561a5a..3f73f46111fc 100644
@@ -117,17 +117,10 @@ static int ice_eswitch_setup_repr(struct ice_pf *pf, struct ice_repr *repr)
 	struct ice_vsi *vsi = repr->src_vsi;
 	struct metadata_dst *dst;
 
-	ice_remove_vsi_fltr(&pf->hw, vsi->idx);
 	repr->dst = metadata_dst_alloc(0, METADATA_HW_PORT_MUX,
 				       GFP_KERNEL);
 	if (!repr->dst)
-		goto err_add_mac_fltr;
-
-	if (ice_vsi_update_security(vsi, ice_vsi_ctx_clear_antispoof))
-		goto err_dst_free;
-
-	if (ice_vsi_add_vlan_zero(vsi))
-		goto err_update_security;
+		return -ENOMEM;
 
 	netif_keep_dst(uplink_vsi->netdev);
 
@@ -136,16 +129,48 @@ static int ice_eswitch_setup_repr(struct ice_pf *pf, struct ice_repr *repr)
 	dst->u.port_info.lower_dev = uplink_vsi->netdev;
 
 	return 0;
+}
 
-err_update_security:
+/**
+ * ice_eswitch_cfg_vsi - configure VSI to work in slow-path
+ * @vsi: VSI structure of representee
+ * @mac: representee MAC
+ *
+ * Return: 0 on success, non-zero on error.
+ */
+int ice_eswitch_cfg_vsi(struct ice_vsi *vsi, const u8 *mac)
+{
+	int err;
+
+	ice_remove_vsi_fltr(&vsi->back->hw, vsi->idx);
+
+	err = ice_vsi_update_security(vsi, ice_vsi_ctx_clear_antispoof);
+	if (err)
+		goto err_update_security;
+
+	err = ice_vsi_add_vlan_zero(vsi);
+	if (err)
+		goto err_vlan_zero;
+
+	return 0;
+
+err_vlan_zero:
 	ice_vsi_update_security(vsi, ice_vsi_ctx_set_antispoof);
-err_dst_free:
-	metadata_dst_free(repr->dst);
-	repr->dst = NULL;
-err_add_mac_fltr:
-	ice_fltr_add_mac_and_broadcast(vsi, repr->parent_mac, ICE_FWD_TO_VSI);
+err_update_security:
+	ice_fltr_add_mac_and_broadcast(vsi, mac, ICE_FWD_TO_VSI);
 
-	return -ENODEV;
+	return err;
+}
+
+/**
+ * ice_eswitch_decfg_vsi - unroll changes done to VSI for switchdev
+ * @vsi: VSI structure of representee
+ * @mac: representee MAC
+ */
+void ice_eswitch_decfg_vsi(struct ice_vsi *vsi, const u8 *mac)
+{
+	ice_vsi_update_security(vsi, ice_vsi_ctx_set_antispoof);
+	ice_fltr_add_mac_and_broadcast(vsi, mac, ICE_FWD_TO_VSI);
 }
 
 /**
drivers/net/ethernet/intel/ice/ice_eswitch.h +10 -0
index e2e5c0c75e7d..9a25606e9740 100644
@@ -28,6 +28,9 @@ netdev_tx_t
 ice_eswitch_port_start_xmit(struct sk_buff *skb, struct net_device *netdev);
 struct net_device *ice_eswitch_get_target(struct ice_rx_ring *rx_ring,
 					  union ice_32b_rx_flex_desc *rx_desc);
+
+int ice_eswitch_cfg_vsi(struct ice_vsi *vsi, const u8 *mac);
+void ice_eswitch_decfg_vsi(struct ice_vsi *vsi, const u8 *mac);
 #else /* CONFIG_ICE_SWITCHDEV */
 static inline void ice_eswitch_detach(struct ice_pf *pf, struct ice_vf *vf) { }
 
@@ -85,5 +88,12 @@ ice_eswitch_get_target(struct ice_rx_ring *rx_ring,
 {
 	return rx_ring->netdev;
 }
+
+static inline int ice_eswitch_cfg_vsi(struct ice_vsi *vsi, const u8 *mac)
+{
+	return -EOPNOTSUPP;
+}
+
+static inline void ice_eswitch_decfg_vsi(struct ice_vsi *vsi, const u8 *mac) { }
 #endif /* CONFIG_ICE_SWITCHDEV */
 #endif /* _ICE_ESWITCH_H_ */
drivers/net/ethernet/intel/ice/ice_repr.c +7 -0
index 35a6ac8c0466..bdda3401e343 100644
@@ -306,6 +306,7 @@ static void ice_repr_rem(struct ice_repr *repr)
 void ice_repr_rem_vf(struct ice_repr *repr)
 {
 	ice_repr_remove_node(&repr->vf->devlink_port);
+	ice_eswitch_decfg_vsi(repr->src_vsi, repr->parent_mac);
 	unregister_netdev(repr->netdev);
 	ice_devlink_destroy_vf_port(repr->vf);
 	ice_virtchnl_set_dflt_ops(repr->vf);
@@ -401,11 +402,17 @@ struct ice_repr *ice_repr_add_vf(struct ice_vf *vf)
 	if (err)
 		goto err_netdev;
 
+	err = ice_eswitch_cfg_vsi(repr->src_vsi, repr->parent_mac);
+	if (err)
+		goto err_cfg_vsi;
+
 	ice_virtchnl_set_repr_ops(vf);
 	ice_repr_set_tx_topology(vf->pf);
 
 	return repr;
 
+err_cfg_vsi:
+	unregister_netdev(repr->netdev);
 err_netdev:
 	ice_repr_rem(repr);
 err_repr_add:
Signature · 1 line
2.42.0
reviewer Reviewed-by on v3 3/4
#6 lore raw

Re: [iwl-next v3 3/4] ice: move VSI configuration outside repr setup

Quoted 7 lines · Michal Swiatkowski

It is needed because subfunction port representor shouldn't configure the source VSI during representor creation.

Move the code to separate function and call it only in case the VF port representor is being created.

Hi Michal,

The nit below notwithstanding, this looks good to me.

Quoted 51 lines
---
 drivers/net/ethernet/intel/ice/ice_eswitch.c | 55 ++++++++++++++------
 drivers/net/ethernet/intel/ice/ice_eswitch.h | 10 ++++
 drivers/net/ethernet/intel/ice/ice_repr.c    |  7 +++
 3 files changed, 57 insertions(+), 15 deletions(-)
drivers/net/ethernet/intel/ice/ice_eswitch.c +17 -9
index 7b57a6561a5a..3f73f46111fc 100644
@@ -117,17 +117,10 @@ static int ice_eswitch_setup_repr(struct ice_pf *pf, struct ice_repr *repr)
 	struct ice_vsi *vsi = repr->src_vsi;
 	struct metadata_dst *dst;
 
-	ice_remove_vsi_fltr(&pf->hw, vsi->idx);
 	repr->dst = metadata_dst_alloc(0, METADATA_HW_PORT_MUX,
 				       GFP_KERNEL);
 	if (!repr->dst)
-		goto err_add_mac_fltr;
-
-	if (ice_vsi_update_security(vsi, ice_vsi_ctx_clear_antispoof))
-		goto err_dst_free;
-
-	if (ice_vsi_add_vlan_zero(vsi))
-		goto err_update_security;
+		return -ENOMEM;
 
 	netif_keep_dst(uplink_vsi->netdev);
 
@@ -136,16 +129,48 @@ static int ice_eswitch_setup_repr(struct ice_pf *pf, struct ice_repr *repr)
 	dst->u.port_info.lower_dev = uplink_vsi->netdev;
 
 	return 0;
+}
 
-err_update_security:
+/**
+ * ice_eswitch_cfg_vsi - configure VSI to work in slow-path
+ * @vsi: VSI structure of representee
+ * @mac: representee MAC
+ *
+ * Return: 0 on success, non-zero on error.
+ */
+int ice_eswitch_cfg_vsi(struct ice_vsi *vsi, const u8 *mac)
+{
+	int err;
+
+	ice_remove_vsi_fltr(&vsi->back->hw, vsi->idx);
+
+	err = ice_vsi_update_security(vsi, ice_vsi_ctx_clear_antispoof);
+	if (err)

drivers/net/ethernet/intel/ice/ice_eswitch.c static int ice_eswitch_setup_repr(struct ice_pf *pf, struct ice_repr *repr) · line 158

Quoted 10 lines
drivers/net/ethernet/intel/ice/ice_eswitch.c +9 -0
+		goto err_update_security;
+
+	err = ice_vsi_add_vlan_zero(vsi);
+	if (err)
+		goto err_vlan_zero;
+
+	return 0;
+
+err_vlan_zero:
 	ice_vsi_update_security(vsi, ice_vsi_ctx_set_antispoof);

nit: Please consider continuing the practice, that is used for the labels
removed by this patch, of naming labels after what they do rather than what jumps to them.

Quoted 12 lines
drivers/net/ethernet/intel/ice/ice_eswitch.c +5 -6
-err_dst_free:
-	metadata_dst_free(repr->dst);
-	repr->dst = NULL;
-err_add_mac_fltr:
-	ice_fltr_add_mac_and_broadcast(vsi, repr->parent_mac, ICE_FWD_TO_VSI);
+err_update_security:
+	ice_fltr_add_mac_and_broadcast(vsi, mac, ICE_FWD_TO_VSI);
 
-	return -ENODEV;
+	return err;
+}
+

...

#7 lore raw

Re: [iwl-next v3 3/4] ice: move VSI configuration outside repr setup

Quoted 72 lines · Simon Horman
Quoted 7 lines · Michal Swiatkowski

It is needed because subfunction port representor shouldn't configure the source VSI during representor creation.

Move the code to separate function and call it only in case the VF port representor is being created.

Hi Michal,

The nit below notwithstanding, this looks good to me.

Quoted 57 lines
---
 drivers/net/ethernet/intel/ice/ice_eswitch.c | 55 ++++++++++++++------
 drivers/net/ethernet/intel/ice/ice_eswitch.h | 10 ++++
 drivers/net/ethernet/intel/ice/ice_repr.c    |  7 +++
 3 files changed, 57 insertions(+), 15 deletions(-)
drivers/net/ethernet/intel/ice/ice_eswitch.c +23 -9
index 7b57a6561a5a..3f73f46111fc 100644
@@ -117,17 +117,10 @@ static int ice_eswitch_setup_repr(struct ice_pf *pf, struct ice_repr *repr)
 	struct ice_vsi *vsi = repr->src_vsi;
 	struct metadata_dst *dst;
 
-	ice_remove_vsi_fltr(&pf->hw, vsi->idx);
 	repr->dst = metadata_dst_alloc(0, METADATA_HW_PORT_MUX,
 				       GFP_KERNEL);
 	if (!repr->dst)
-		goto err_add_mac_fltr;
-
-	if (ice_vsi_update_security(vsi, ice_vsi_ctx_clear_antispoof))
-		goto err_dst_free;
-
-	if (ice_vsi_add_vlan_zero(vsi))
-		goto err_update_security;
+		return -ENOMEM;
 
 	netif_keep_dst(uplink_vsi->netdev);
 
@@ -136,16 +129,48 @@ static int ice_eswitch_setup_repr(struct ice_pf *pf, struct ice_repr *repr)
 	dst->u.port_info.lower_dev = uplink_vsi->netdev;
 
 	return 0;
+}
 
-err_update_security:
+/**
+ * ice_eswitch_cfg_vsi - configure VSI to work in slow-path
+ * @vsi: VSI structure of representee
+ * @mac: representee MAC
+ *
+ * Return: 0 on success, non-zero on error.
+ */
+int ice_eswitch_cfg_vsi(struct ice_vsi *vsi, const u8 *mac)
+{
+	int err;
+
+	ice_remove_vsi_fltr(&vsi->back->hw, vsi->idx);
+
+	err = ice_vsi_update_security(vsi, ice_vsi_ctx_clear_antispoof);
+	if (err)
+		goto err_update_security;
+
+	err = ice_vsi_add_vlan_zero(vsi);
+	if (err)
+		goto err_vlan_zero;
+
Quoted 9 lines

drivers/net/ethernet/intel/ice/ice_eswitch.c static int ice_eswitch_setup_repr(struct ice_pf *pf, struct ice_repr *repr) · line 158

Quoted 4 lines
drivers/net/ethernet/intel/ice/ice_eswitch.c +3 -0
+	return 0;
+
+err_vlan_zero:
 	ice_vsi_update_security(vsi, ice_vsi_ctx_set_antispoof);

nit: Please consider continuing the practice, that is used for the labels
removed by this patch, of naming labels after what they do rather than what jumps to them.

Ok, I was wondering which approach is better. Probably mixing both is the worst. I will follow your advice next time, thanks.

Quoted 14 lines
Quoted 12 lines
drivers/net/ethernet/intel/ice/ice_eswitch.c +5 -6
-err_dst_free:
-	metadata_dst_free(repr->dst);
-	repr->dst = NULL;
-err_add_mac_fltr:
-	ice_fltr_add_mac_and_broadcast(vsi, repr->parent_mac, ICE_FWD_TO_VSI);
+err_update_security:
+	ice_fltr_add_mac_and_broadcast(vsi, mac, ICE_FWD_TO_VSI);
 
-	return -ENODEV;
+	return err;
+}
+

...

#8 lore raw

PATCH v3 4/4 ice: update representor when VSI is ready

In reply to Michal Swiatkowski

In case of reset of VF VSI can be reallocated. To handle this case it should be properly updated.

Reload representor as vsi->vsi_num can be different than the one stored when representor was created.

Instead of only changing antispoof do whole VSI configuration for eswitch.

---
 drivers/net/ethernet/intel/ice/ice_eswitch.c | 21 +++++++++++++-------
 drivers/net/ethernet/intel/ice/ice_eswitch.h |  4 ++--
 drivers/net/ethernet/intel/ice/ice_vf_lib.c  |  2 +-
 3 files changed, 17 insertions(+), 10 deletions(-)
drivers/net/ethernet/intel/ice/ice_eswitch.c +14 -7
index 3f73f46111fc..4f539b1c7781 100644
@@ -178,16 +178,16 @@ void ice_eswitch_decfg_vsi(struct ice_vsi *vsi, const u8 *mac)
  * @repr_id: representor ID
  * @vsi: VSI for which port representor is configured
  */
-void ice_eswitch_update_repr(unsigned long repr_id, struct ice_vsi *vsi)
+void ice_eswitch_update_repr(unsigned long *repr_id, struct ice_vsi *vsi)
 {
 	struct ice_pf *pf = vsi->back;
 	struct ice_repr *repr;
-	int ret;
+	int err;
 
 	if (!ice_is_switchdev_running(pf))
 		return;
 
-	repr = xa_load(&pf->eswitch.reprs, repr_id);
+	repr = xa_load(&pf->eswitch.reprs, *repr_id);
 	if (!repr)
 		return;
 
@@ -197,12 +197,19 @@ void ice_eswitch_update_repr(unsigned long repr_id, struct ice_vsi *vsi)
 	if (repr->br_port)
 		repr->br_port->vsi = vsi;
 
-	ret = ice_vsi_update_security(vsi, ice_vsi_ctx_clear_antispoof);
-	if (ret) {
-		ice_fltr_add_mac_and_broadcast(vsi, repr->parent_mac,
-					       ICE_FWD_TO_VSI);
+	err = ice_eswitch_cfg_vsi(vsi, repr->parent_mac);
+	if (err)
 		dev_err(ice_pf_to_dev(pf), "Failed to update VSI of port representor %d",
 			repr->id);
+
+	/* The VSI number is different, reload the PR with new id */
+	if (repr->id != vsi->vsi_num) {
+		xa_erase(&pf->eswitch.reprs, repr->id);
+		repr->id = vsi->vsi_num;
+		if (xa_insert(&pf->eswitch.reprs, repr->id, repr, GFP_KERNEL))
+			dev_err(ice_pf_to_dev(pf), "Failed to reload port representor %d",
+				repr->id);
+		*repr_id = repr->id;
 	}
 }
 
drivers/net/ethernet/intel/ice/ice_eswitch.h +2 -2
index 9a25606e9740..09194d514f9b 100644
@@ -18,7 +18,7 @@ ice_eswitch_mode_set(struct devlink *devlink, u16 mode,
 		     struct netlink_ext_ack *extack);
 bool ice_is_eswitch_mode_switchdev(struct ice_pf *pf);
 
-void ice_eswitch_update_repr(unsigned long repr_id, struct ice_vsi *vsi);
+void ice_eswitch_update_repr(unsigned long *repr_id, struct ice_vsi *vsi);
 
 void ice_eswitch_stop_all_tx_queues(struct ice_pf *pf);
 
@@ -47,7 +47,7 @@ ice_eswitch_set_target_vsi(struct sk_buff *skb,
 			   struct ice_tx_offload_params *off) { }
 
 static inline void
-ice_eswitch_update_repr(unsigned long repr_id, struct ice_vsi *vsi) { }
+ice_eswitch_update_repr(unsigned long *repr_id, struct ice_vsi *vsi) { }
 
 static inline int ice_eswitch_configure(struct ice_pf *pf)
 {
drivers/net/ethernet/intel/ice/ice_vf_lib.c +1 -1
index 48a8d462d76a..5635e9da2212 100644
@@ -948,7 +948,7 @@ int ice_reset_vf(struct ice_vf *vf, u32 flags)
 		goto out_unlock;
 	}
 
-	ice_eswitch_update_repr(vf->repr_id, vsi);
+	ice_eswitch_update_repr(&vf->repr_id, vsi);
 
 	/* if the VF has been reset allow it to come up again */
 	ice_mbx_clear_malvf(&vf->mbx_info);
Signature · 1 line
2.42.0
reviewer Reviewed-by on v3 4/4
#9 lore raw

Re: [iwl-next v3 4/4] ice: update representor when VSI is ready

Quoted 10 lines · Michal Swiatkowski

In case of reset of VF VSI can be reallocated. To handle this case it should be properly updated.

Reload representor as vsi->vsi_num can be different than the one stored when representor was created.

Instead of only changing antispoof do whole VSI configuration for eswitch.

Thanks Michal,

My comment below notwithstanding, this looks good to me.

Quoted 43 lines
---
 drivers/net/ethernet/intel/ice/ice_eswitch.c | 21 +++++++++++++-------
 drivers/net/ethernet/intel/ice/ice_eswitch.h |  4 ++--
 drivers/net/ethernet/intel/ice/ice_vf_lib.c  |  2 +-
 3 files changed, 17 insertions(+), 10 deletions(-)
drivers/net/ethernet/intel/ice/ice_eswitch.c +6 -7
index 3f73f46111fc..4f539b1c7781 100644
@@ -178,16 +178,16 @@ void ice_eswitch_decfg_vsi(struct ice_vsi *vsi, const u8 *mac)
  * @repr_id: representor ID
  * @vsi: VSI for which port representor is configured
  */
-void ice_eswitch_update_repr(unsigned long repr_id, struct ice_vsi *vsi)
+void ice_eswitch_update_repr(unsigned long *repr_id, struct ice_vsi *vsi)
 {
 	struct ice_pf *pf = vsi->back;
 	struct ice_repr *repr;
-	int ret;
+	int err;
 
 	if (!ice_is_switchdev_running(pf))
 		return;
 
-	repr = xa_load(&pf->eswitch.reprs, repr_id);
+	repr = xa_load(&pf->eswitch.reprs, *repr_id);
 	if (!repr)
 		return;
 
@@ -197,12 +197,19 @@ void ice_eswitch_update_repr(unsigned long repr_id, struct ice_vsi *vsi)
 	if (repr->br_port)
 		repr->br_port->vsi = vsi;
 
-	ret = ice_vsi_update_security(vsi, ice_vsi_ctx_clear_antispoof);
-	if (ret) {
-		ice_fltr_add_mac_and_broadcast(vsi, repr->parent_mac,
-					       ICE_FWD_TO_VSI);
+	err = ice_eswitch_cfg_vsi(vsi, repr->parent_mac);
+	if (err)
 		dev_err(ice_pf_to_dev(pf), "Failed to update VSI of port representor %d",
 			repr->id);
+

drivers/net/ethernet/intel/ice/ice_eswitch.c void ice_eswitch_update_repr(unsigned long repr_id, struct ice_vsi *vsi) · line 214

Quoted 10 lines
drivers/net/ethernet/intel/ice/ice_eswitch.c +8 -0
+	/* The VSI number is different, reload the PR with new id */
+	if (repr->id != vsi->vsi_num) {
+		xa_erase(&pf->eswitch.reprs, repr->id);
+		repr->id = vsi->vsi_num;
+		if (xa_insert(&pf->eswitch.reprs, repr->id, repr, GFP_KERNEL))
+			dev_err(ice_pf_to_dev(pf), "Failed to reload port representor %d",
+				repr->id);
+		*repr_id = repr->id;
 	}
 }

FWIIW, I think it would be nicer if ice_eswitch_decfg_vsi returned the repr_id rather than passing repr_id by reference. This is because, in general, I think it's nicer to reduce side-effects of functions.

...

#10 lore raw

Re: [iwl-next v3 4/4] ice: update representor when VSI is ready

Quoted 67 lines · Simon Horman
Quoted 10 lines · Michal Swiatkowski

In case of reset of VF VSI can be reallocated. To handle this case it should be properly updated.

Reload representor as vsi->vsi_num can be different than the one stored when representor was created.

Instead of only changing antispoof do whole VSI configuration for eswitch.

Thanks Michal,

My comment below notwithstanding, this looks good to me.

Quoted 49 lines
---
 drivers/net/ethernet/intel/ice/ice_eswitch.c | 21 +++++++++++++-------
 drivers/net/ethernet/intel/ice/ice_eswitch.h |  4 ++--
 drivers/net/ethernet/intel/ice/ice_vf_lib.c  |  2 +-
 3 files changed, 17 insertions(+), 10 deletions(-)
drivers/net/ethernet/intel/ice/ice_eswitch.c +12 -7
index 3f73f46111fc..4f539b1c7781 100644
@@ -178,16 +178,16 @@ void ice_eswitch_decfg_vsi(struct ice_vsi *vsi, const u8 *mac)
  * @repr_id: representor ID
  * @vsi: VSI for which port representor is configured
  */
-void ice_eswitch_update_repr(unsigned long repr_id, struct ice_vsi *vsi)
+void ice_eswitch_update_repr(unsigned long *repr_id, struct ice_vsi *vsi)
 {
 	struct ice_pf *pf = vsi->back;
 	struct ice_repr *repr;
-	int ret;
+	int err;
 
 	if (!ice_is_switchdev_running(pf))
 		return;
 
-	repr = xa_load(&pf->eswitch.reprs, repr_id);
+	repr = xa_load(&pf->eswitch.reprs, *repr_id);
 	if (!repr)
 		return;
 
@@ -197,12 +197,19 @@ void ice_eswitch_update_repr(unsigned long repr_id, struct ice_vsi *vsi)
 	if (repr->br_port)
 		repr->br_port->vsi = vsi;
 
-	ret = ice_vsi_update_security(vsi, ice_vsi_ctx_clear_antispoof);
-	if (ret) {
-		ice_fltr_add_mac_and_broadcast(vsi, repr->parent_mac,
-					       ICE_FWD_TO_VSI);
+	err = ice_eswitch_cfg_vsi(vsi, repr->parent_mac);
+	if (err)
 		dev_err(ice_pf_to_dev(pf), "Failed to update VSI of port representor %d",
 			repr->id);
+
+	/* The VSI number is different, reload the PR with new id */
+	if (repr->id != vsi->vsi_num) {
+		xa_erase(&pf->eswitch.reprs, repr->id);
+		repr->id = vsi->vsi_num;
+		if (xa_insert(&pf->eswitch.reprs, repr->id, repr, GFP_KERNEL))
+			dev_err(ice_pf_to_dev(pf), "Failed to reload port representor %d",
Quoted 9 lines

drivers/net/ethernet/intel/ice/ice_eswitch.c void ice_eswitch_update_repr(unsigned long repr_id, struct ice_vsi *vsi) · line 214

Quoted 4 lines
drivers/net/ethernet/intel/ice/ice_eswitch.c +2 -0
+				repr->id);
+		*repr_id = repr->id;
 	}
 }

FWIIW, I think it would be nicer if ice_eswitch_decfg_vsi returned the repr_id rather than passing repr_id by reference. This is because, in general, I think it's nicer to reduce side-effects of functions.

I wanted to change repr->id and the vf (or sf) repr id in the same place. But in general I agree with your comment.

Thanks,
Michal

Quoted 1 line

...