Skip to contentSkip to conversation

net: dsa: lantiq_gswip: code improvements

PATCH Superseded Martin Schiller 2 participants 14 messages Jun 10, 2024

Subsystems (4)

v3 of 5 Superseded Latest is v5 →

lore
Share & tools
lore
#0 lore raw

v3 cover net: dsa: lantiq_gswip: code improvements

This patchset for the lantiq_gswip driver is a collection of minor fixes and coding improvements by Martin Blumenstingl without any real changes in the actual functionality.

=== Changelog ===
From v2:
- removed unused variable max_ports in gswip_add_single_port_br()

From v1:
- signal that we only update example code in dt-bindings
- don't use the word 'fix' if not appropriate
- new patch: add terminating '\n' where missing
- renamed MAC_BRIDGE macros to make it obvious which register field is used
- new patch: remove dead code from gswip_add_single_port_br()
- updated error message if FID not found in gswip_port_fdb()

Martin Blumenstingl (9):
dt-bindings: net: dsa: lantiq_gswip: Add missing CPU port phy-mode and
fixed-link to example
net: dsa: lantiq_gswip: Only allow phy-mode = "internal" on the CPU
port
net: dsa: lantiq_gswip: Use dev_err_probe where appropriate
net: dsa: lantiq_gswip: Don't manually call gswip_port_enable()
net: dsa: lantiq_gswip: Use dsa_is_cpu_port() in
gswip_port_change_mtu()
net: dsa: lantiq_gswip: Change literal 6 to ETH_ALEN
net: dsa: lantiq_gswip: Consistently use macros for the mac bridge
table
net: dsa: lantiq_gswip: Update comments in gswip_port_vlan_filtering()
net: dsa: lantiq_gswip: Improve error message in gswip_port_fdb()

Martin Schiller (3):
net: dsa: lantiq_gswip: add terminating \n where missing
net: dsa: lantiq_gswip: do also enable or disable cpu port
net: dsa: lantiq_gswip: Remove dead code from
gswip_add_single_port_br()

 .../bindings/net/dsa/lantiq-gswip.txt         |   6 +
 drivers/net/dsa/lantiq_gswip.c                | 123 ++++++++----------
 2 files changed, 61 insertions(+), 68 deletions(-)
Signature · 1 line
2.39.2
#1 lore raw

PATCH v3 1/12 dt-bindings: net: dsa: lantiq_gswip: Add missing CPU port phy-mode and fixed-link to example

From: Martin Blumenstingl <[email protected]>

The CPU port has to specify a phy-mode and either a phy or a fixed-link. Since GSWIP is connected using a SoC internal protocol there's no PHY involved. Add phy-mode = "internal" and a fixed-link to the example code to describe the communication between the PMAC (Ethernet controller) and GSWIP switch.

---
 Documentation/devicetree/bindings/net/dsa/lantiq-gswip.txt | 6 ++++++
 1 file changed, 6 insertions(+)
Documentation/devicetree/bindings/net/dsa/lantiq-gswip.txt +6 -0
index 8bb1eff21cb1..e81ba0e0da0f 100644
@@ -96,7 +96,13 @@ switch@e108000 {
 
 		port@6 {
 			reg = <0x6>;
+			phy-mode = "internal";
 			ethernet = <&eth0>;
+
+			fixed-link {
+				speed = <1000>;
+				full-duplex;
+			};
 		};
 	};
 
Signature · 1 line
2.39.2
#2 lore raw

PATCH v3 2/12 net: dsa: lantiq_gswip: Only allow phy-mode = "internal" on the CPU port

In reply to Martin Schiller

From: Martin Blumenstingl <[email protected]>

Add the CPU port to gswip_xrx200_phylink_get_caps() and gswip_xrx300_phylink_get_caps(). It connects through a SoC-internal bus, so the only allowed phy-mode is PHY_INTERFACE_MODE_INTERNAL.

---
 drivers/net/dsa/lantiq_gswip.c | 2 ++
 1 file changed, 2 insertions(+)
drivers/net/dsa/lantiq_gswip.c +2 -0
index a557049e34f5..b9c7076ce32f 100644
@@ -1516,6 +1516,7 @@ static void gswip_xrx200_phylink_get_caps(struct dsa_switch *ds, int port,
 	case 2:
 	case 3:
 	case 4:
+	case 6:
 		__set_bit(PHY_INTERFACE_MODE_INTERNAL,
 			  config->supported_interfaces);
 		break;
@@ -1547,6 +1548,7 @@ static void gswip_xrx300_phylink_get_caps(struct dsa_switch *ds, int port,
 	case 2:
 	case 3:
 	case 4:
+	case 6:
 		__set_bit(PHY_INTERFACE_MODE_INTERNAL,
 			  config->supported_interfaces);
 		break;
Signature · 1 line
2.39.2
#3 lore raw

PATCH v3 3/12 net: dsa: lantiq_gswip: add terminating \n where missing

In reply to Martin Schiller

Some dev_err are missing the terminating \n. Let's add that.

---
 drivers/net/dsa/lantiq_gswip.c | 14 +++++++-------
 1 file changed, 7 insertions(+), 7 deletions(-)
drivers/net/dsa/lantiq_gswip.c +7 -7
index b9c7076ce32f..fe64baf0d7f1 100644
@@ -836,7 +836,7 @@ static int gswip_setup(struct dsa_switch *ds)
 
 	err = gswip_pce_load_microcode(priv);
 	if (err) {
-		dev_err(priv->dev, "writing PCE microcode failed, %i", err);
+		dev_err(priv->dev, "writing PCE microcode failed, %i\n", err);
 		return err;
 	}
 
@@ -1792,7 +1792,7 @@ static u32 gswip_bcm_ram_entry_read(struct gswip_priv *priv, u32 table,
 	err = gswip_switch_r_timeout(priv, GSWIP_BM_RAM_CTRL,
 				     GSWIP_BM_RAM_CTRL_BAS);
 	if (err) {
-		dev_err(priv->dev, "timeout while reading table: %u, index: %u",
+		dev_err(priv->dev, "timeout while reading table: %u, index: %u\n",
 			table, index);
 		return 0;
 	}
@@ -2021,7 +2021,7 @@ static void gswip_gphy_fw_remove(struct gswip_priv *priv,
 
 	ret = regmap_write(priv->rcu_regmap, gphy_fw->fw_addr_offset, 0);
 	if (ret)
-		dev_err(priv->dev, "can not reset GPHY FW pointer");
+		dev_err(priv->dev, "can not reset GPHY FW pointer\n");
 
 	clk_disable_unprepare(gphy_fw->clk_gate);
 
@@ -2050,7 +2050,7 @@ static int gswip_gphy_fw_list(struct gswip_priv *priv,
 			priv->gphy_fw_name_cfg = &xrx200a2x_gphy_data;
 			break;
 		default:
-			dev_err(dev, "unknown GSWIP version: 0x%x", version);
+			dev_err(dev, "unknown GSWIP version: 0x%x\n", version);
 			return -ENOENT;
 		}
 	}
@@ -2060,7 +2060,7 @@ static int gswip_gphy_fw_list(struct gswip_priv *priv,
 		priv->gphy_fw_name_cfg = match->data;
 
 	if (!priv->gphy_fw_name_cfg) {
-		dev_err(dev, "GPHY compatible type not supported");
+		dev_err(dev, "GPHY compatible type not supported\n");
 		return -ENOENT;
 	}
 
@@ -2163,7 +2163,7 @@ static int gswip_probe(struct platform_device *pdev)
 			return -EINVAL;
 		break;
 	default:
-		dev_err(dev, "unknown GSWIP version: 0x%x", version);
+		dev_err(dev, "unknown GSWIP version: 0x%x\n", version);
 		return -ENOENT;
 	}
 
@@ -2191,7 +2191,7 @@ static int gswip_probe(struct platform_device *pdev)
 		goto gphy_fw_remove;
 	}
 	if (!dsa_is_cpu_port(priv->ds, priv->hw_info->cpu_port)) {
-		dev_err(dev, "wrong CPU port defined, HW only supports port: %i",
+		dev_err(dev, "wrong CPU port defined, HW only supports port: %i\n",
 			priv->hw_info->cpu_port);
 		err = -EINVAL;
 		goto disable_switch;
Signature · 1 line
2.39.2
#5 lore raw

PATCH v3 4/12 net: dsa: lantiq_gswip: Use dev_err_probe where appropriate

In reply to Martin Schiller

From: Martin Blumenstingl <[email protected]>

dev_err_probe() can be used to simplify the existing code. Also it means we get rid of the following warning which is seen whenever the PMAC (Ethernet controller which connects to GSWIP's CPU port) has not been probed yet:
gswip 1e108000.switch: dsa switch register failed: -517

---
 drivers/net/dsa/lantiq_gswip.c | 53 ++++++++++++++++------------------
 1 file changed, 25 insertions(+), 28 deletions(-)
drivers/net/dsa/lantiq_gswip.c +25 -28
index fe64baf0d7f1..37cc0247dc78 100644
@@ -1931,11 +1931,9 @@ static int gswip_gphy_fw_load(struct gswip_priv *priv, struct gswip_gphy_fw *gph
 	msleep(200);
 
 	ret = request_firmware(&fw, gphy_fw->fw_name, dev);
-	if (ret) {
-		dev_err(dev, "failed to load firmware: %s, error: %i\n",
-			gphy_fw->fw_name, ret);
-		return ret;
-	}
+	if (ret)
+		return dev_err_probe(dev, ret, "failed to load firmware: %s\n",
+				     gphy_fw->fw_name);
 
 	/* GPHY cores need the firmware code in a persistent and contiguous
 	 * memory area with a 16 kB boundary aligned start address.
@@ -1948,9 +1946,9 @@ static int gswip_gphy_fw_load(struct gswip_priv *priv, struct gswip_gphy_fw *gph
 		dev_addr = ALIGN(dma_addr, XRX200_GPHY_FW_ALIGN);
 		memcpy(fw_addr, fw->data, fw->size);
 	} else {
-		dev_err(dev, "failed to alloc firmware memory\n");
 		release_firmware(fw);
-		return -ENOMEM;
+		return dev_err_probe(dev, -ENOMEM,
+				     "failed to alloc firmware memory\n");
 	}
 
 	release_firmware(fw);
@@ -1977,8 +1975,8 @@ static int gswip_gphy_fw_probe(struct gswip_priv *priv,
 
 	gphy_fw->clk_gate = devm_clk_get(dev, gphyname);
 	if (IS_ERR(gphy_fw->clk_gate)) {
-		dev_err(dev, "Failed to lookup gate clock\n");
-		return PTR_ERR(gphy_fw->clk_gate);
+		return dev_err_probe(dev, PTR_ERR(gphy_fw->clk_gate),
+				     "Failed to lookup gate clock\n");
 	}
 
 	ret = of_property_read_u32(gphy_fw_np, "reg", &gphy_fw->fw_addr_offset);
@@ -1998,8 +1996,8 @@ static int gswip_gphy_fw_probe(struct gswip_priv *priv,
 		gphy_fw->fw_name = priv->gphy_fw_name_cfg->ge_firmware_name;
 		break;
 	default:
-		dev_err(dev, "Unknown GPHY mode %d\n", gphy_mode);
-		return -EINVAL;
+		return dev_err_probe(dev, -EINVAL, "Unknown GPHY mode %d\n",
+				     gphy_mode);
 	}
 
 	gphy_fw->reset = of_reset_control_array_get_exclusive(gphy_fw_np);
@@ -2050,8 +2048,9 @@ static int gswip_gphy_fw_list(struct gswip_priv *priv,
 			priv->gphy_fw_name_cfg = &xrx200a2x_gphy_data;
 			break;
 		default:
-			dev_err(dev, "unknown GSWIP version: 0x%x\n", version);
-			return -ENOENT;
+			return dev_err_probe(dev, -ENOENT,
+					     "unknown GSWIP version: 0x%x\n",
+					     version);
 		}
 	}
 
@@ -2059,10 +2058,9 @@ static int gswip_gphy_fw_list(struct gswip_priv *priv,
 	if (match && match->data)
 		priv->gphy_fw_name_cfg = match->data;
 
-	if (!priv->gphy_fw_name_cfg) {
-		dev_err(dev, "GPHY compatible type not supported\n");
-		return -ENOENT;
-	}
+	if (!priv->gphy_fw_name_cfg)
+		return dev_err_probe(dev, -ENOENT,
+				     "GPHY compatible type not supported\n");
 
 	priv->num_gphy_fw = of_get_available_child_count(gphy_fw_list_np);
 	if (!priv->num_gphy_fw)
@@ -2163,8 +2161,8 @@ static int gswip_probe(struct platform_device *pdev)
 			return -EINVAL;
 		break;
 	default:
-		dev_err(dev, "unknown GSWIP version: 0x%x\n", version);
-		return -ENOENT;
+		return dev_err_probe(dev, -ENOENT,
+				     "unknown GSWIP version: 0x%x\n", version);
 	}
 
 	/* bring up the mdio bus */
@@ -2172,28 +2170,27 @@ static int gswip_probe(struct platform_device *pdev)
 	if (gphy_fw_np) {
 		err = gswip_gphy_fw_list(priv, gphy_fw_np, version);
 		of_node_put(gphy_fw_np);
-		if (err) {
-			dev_err(dev, "gphy fw probe failed\n");
-			return err;
-		}
+		if (err)
+			return dev_err_probe(dev, err,
+					     "gphy fw probe failed\n");
 	}
 
 	/* bring up the mdio bus */
 	err = gswip_mdio(priv);
 	if (err) {
-		dev_err(dev, "mdio probe failed\n");
+		dev_err_probe(dev, err, "mdio probe failed\n");
 		goto gphy_fw_remove;
 	}
 
 	err = dsa_register_switch(priv->ds);
 	if (err) {
-		dev_err(dev, "dsa switch register failed: %i\n", err);
+		dev_err_probe(dev, err, "dsa switch registration failed\n");
 		goto gphy_fw_remove;
 	}
 	if (!dsa_is_cpu_port(priv->ds, priv->hw_info->cpu_port)) {
-		dev_err(dev, "wrong CPU port defined, HW only supports port: %i\n",
-			priv->hw_info->cpu_port);
-		err = -EINVAL;
+		err = dev_err_probe(dev, -EINVAL,
+				    "wrong CPU port defined, HW only supports port: %i\n",
+				    priv->hw_info->cpu_port);
 		goto disable_switch;
 	}
 
Signature · 1 line
2.39.2
#6 lore raw

PATCH v3 5/12 net: dsa: lantiq_gswip: Don't manually call gswip_port_enable()

In reply to Martin Schiller

From: Martin Blumenstingl <[email protected]>

We don't need to manually call gswip_port_enable() from within gswip_setup() for the CPU port. DSA does this automatically for us.

---
 drivers/net/dsa/lantiq_gswip.c | 2 --
 1 file changed, 2 deletions(-)
drivers/net/dsa/lantiq_gswip.c +0 -2
index 37cc0247dc78..c1f9419af35f 100644
@@ -898,8 +898,6 @@ static int gswip_setup(struct dsa_switch *ds)
 
 	ds->mtu_enforcement_ingress = true;
 
-	gswip_port_enable(ds, cpu_port, NULL);
-
 	ds->configure_vlan_while_not_filtering = false;
 
 	return 0;
Signature · 1 line
2.39.2
#7 lore raw

PATCH v3 6/12 net: dsa: lantiq_gswip: do also enable or disable cpu port

In reply to Martin Schiller

Before commit 74be4babe72f ("net: dsa: do not enable or disable non user ports"), gswip_port_enable/disable() were also executed for the cpu port in gswip_setup() which disabled the cpu port during initialization.

Let's restore this by removing the dsa_is_user_port checks. Also, let's clean up the gswip_port_enable() function so that we only have to check for the cpu port once. The operation reordering done here is safe.

---
 drivers/net/dsa/lantiq_gswip.c | 24 ++++++++----------------
 1 file changed, 8 insertions(+), 16 deletions(-)
drivers/net/dsa/lantiq_gswip.c +8 -16
index c1f9419af35f..8ec329d0c136 100644
@@ -695,13 +695,18 @@ static int gswip_port_enable(struct dsa_switch *ds, int port,
 	struct gswip_priv *priv = ds->priv;
 	int err;
 
-	if (!dsa_is_user_port(ds, port))
-		return 0;
-
 	if (!dsa_is_cpu_port(ds, port)) {
+		u32 mdio_phy = 0;
+
 		err = gswip_add_single_port_br(priv, port, true);
 		if (err)
 			return err;
+
+		if (phydev)
+			mdio_phy = phydev->mdio.addr & GSWIP_MDIO_PHY_ADDR_MASK;
+
+		gswip_mdio_mask(priv, GSWIP_MDIO_PHY_ADDR_MASK, mdio_phy,
+				GSWIP_MDIO_PHYp(port));
 	}
 
 	/* RMON Counter Enable for port */
@@ -714,16 +719,6 @@ static int gswip_port_enable(struct dsa_switch *ds, int port,
 	gswip_switch_mask(priv, 0, GSWIP_SDMA_PCTRL_EN,
 			  GSWIP_SDMA_PCTRLp(port));
 
-	if (!dsa_is_cpu_port(ds, port)) {
-		u32 mdio_phy = 0;
-
-		if (phydev)
-			mdio_phy = phydev->mdio.addr & GSWIP_MDIO_PHY_ADDR_MASK;
-
-		gswip_mdio_mask(priv, GSWIP_MDIO_PHY_ADDR_MASK, mdio_phy,
-				GSWIP_MDIO_PHYp(port));
-	}
-
 	return 0;
 }
 
@@ -731,9 +726,6 @@ static void gswip_port_disable(struct dsa_switch *ds, int port)
 {
 	struct gswip_priv *priv = ds->priv;
 
-	if (!dsa_is_user_port(ds, port))
-		return;
-
 	gswip_switch_mask(priv, GSWIP_FDMA_PCTRL_EN, 0,
 			  GSWIP_FDMA_PCTRLp(port));
 	gswip_switch_mask(priv, GSWIP_SDMA_PCTRL_EN, 0,
Signature · 1 line
2.39.2
#8 lore raw

PATCH v3 7/12 net: dsa: lantiq_gswip: Use dsa_is_cpu_port() in gswip_port_change_mtu()

In reply to Martin Schiller

From: Martin Blumenstingl <[email protected]>

Make the check for the CPU port in gswip_port_change_mtu() consistent with other areas of the driver by using dsa_is_cpu_port().

---
 drivers/net/dsa/lantiq_gswip.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)
drivers/net/dsa/lantiq_gswip.c +1 -2
index 8ec329d0c136..58c069f964dd 100644
@@ -1464,12 +1464,11 @@ static int gswip_port_max_mtu(struct dsa_switch *ds, int port)
 static int gswip_port_change_mtu(struct dsa_switch *ds, int port, int new_mtu)
 {
 	struct gswip_priv *priv = ds->priv;
-	int cpu_port = priv->hw_info->cpu_port;
 
 	/* CPU port always has maximum mtu of user ports, so use it to set
 	 * switch frame size, including 8 byte special header.
 	 */
-	if (port == cpu_port) {
+	if (dsa_is_cpu_port(ds, port)) {
 		new_mtu += 8;
 		gswip_switch_w(priv, VLAN_ETH_HLEN + new_mtu + ETH_FCS_LEN,
 			       GSWIP_MAC_FLEN);
Signature · 1 line
2.39.2
#9 lore raw

PATCH v3 8/12 net: dsa: lantiq_gswip: Change literal 6 to ETH_ALEN

In reply to Martin Schiller

From: Martin Blumenstingl <[email protected]>

The addr variable in gswip_port_fdb_dump() stores a mac address. Use ETH_ALEN to make this consistent across other drivers.

---
 drivers/net/dsa/lantiq_gswip.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/net/dsa/lantiq_gswip.c +1 -1
index 58c069f964dd..525a62a21601 100644
@@ -1413,7 +1413,7 @@ static int gswip_port_fdb_dump(struct dsa_switch *ds, int port,
 {
 	struct gswip_priv *priv = ds->priv;
 	struct gswip_pce_table_entry mac_bridge = {0,};
-	unsigned char addr[6];
+	unsigned char addr[ETH_ALEN];
 	int i;
 	int err;
 
Signature · 1 line
2.39.2
#10 lore raw

PATCH v3 9/12 net: dsa: lantiq_gswip: Consistently use macros for the mac bridge table

In reply to Martin Schiller

From: Martin Blumenstingl <[email protected]>

Only bits [5:0] in mac_bridge.key[3] are reserved for the FID. Also, for dynamic (learned) entries, bits [7:4] in mac_bridge.val[0] represents the port.

Introduce new macros GSWIP_TABLE_MAC_BRIDGE_KEY3_FID and GSWIP_TABLE_MAC_BRIDGE_VAL0_PORT macro and use it throughout the driver. Also rename and update GSWIP_TABLE_MAC_BRIDGE_VAL1_STATIC to use the BIT() macro. This makes the driver code easier to understand.

---
 drivers/net/dsa/lantiq_gswip.c | 18 +++++++++++-------
 1 file changed, 11 insertions(+), 7 deletions(-)
drivers/net/dsa/lantiq_gswip.c +11 -7
index 525a62a21601..cd88b00cfdc1 100644
@@ -236,7 +236,9 @@
 #define GSWIP_TABLE_ACTIVE_VLAN		0x01
 #define GSWIP_TABLE_VLAN_MAPPING	0x02
 #define GSWIP_TABLE_MAC_BRIDGE		0x0b
-#define  GSWIP_TABLE_MAC_BRIDGE_STATIC	0x01	/* Static not, aging entry */
+#define  GSWIP_TABLE_MAC_BRIDGE_KEY3_FID	GENMASK(5, 0)	/* Filtering identifier */
+#define  GSWIP_TABLE_MAC_BRIDGE_VAL0_PORT	GENMASK(7, 4)	/* Port on learned entries */
+#define  GSWIP_TABLE_MAC_BRIDGE_VAL1_STATIC	BIT(0)		/* Static, non-aging entry */
 
 #define XRX200_GPHY_FW_ALIGN	(16 * 1024)
 
@@ -1304,10 +1306,11 @@ static void gswip_port_fast_age(struct dsa_switch *ds, int port)
 		if (!mac_bridge.valid)
 			continue;
 
-		if (mac_bridge.val[1] & GSWIP_TABLE_MAC_BRIDGE_STATIC)
+		if (mac_bridge.val[1] & GSWIP_TABLE_MAC_BRIDGE_VAL1_STATIC)
 			continue;
 
-		if (((mac_bridge.val[0] & GENMASK(7, 4)) >> 4) != port)
+		if (port != FIELD_GET(GSWIP_TABLE_MAC_BRIDGE_VAL0_PORT,
+				      mac_bridge.val[0]))
 			continue;
 
 		mac_bridge.valid = false;
@@ -1382,9 +1385,9 @@ static int gswip_port_fdb(struct dsa_switch *ds, int port,
 	mac_bridge.key[0] = addr[5] | (addr[4] << 8);
 	mac_bridge.key[1] = addr[3] | (addr[2] << 8);
 	mac_bridge.key[2] = addr[1] | (addr[0] << 8);
-	mac_bridge.key[3] = fid;
+	mac_bridge.key[3] = FIELD_PREP(GSWIP_TABLE_MAC_BRIDGE_KEY3_FID, fid);
 	mac_bridge.val[0] = add ? BIT(port) : 0; /* port map */
-	mac_bridge.val[1] = GSWIP_TABLE_MAC_BRIDGE_STATIC;
+	mac_bridge.val[1] = GSWIP_TABLE_MAC_BRIDGE_VAL1_STATIC;
 	mac_bridge.valid = add;
 
 	err = gswip_pce_table_entry_write(priv, &mac_bridge);
@@ -1438,14 +1441,15 @@ static int gswip_port_fdb_dump(struct dsa_switch *ds, int port,
 		addr[2] = (mac_bridge.key[1] >> 8) & 0xff;
 		addr[1] = mac_bridge.key[2] & 0xff;
 		addr[0] = (mac_bridge.key[2] >> 8) & 0xff;
-		if (mac_bridge.val[1] & GSWIP_TABLE_MAC_BRIDGE_STATIC) {
+		if (mac_bridge.val[1] & GSWIP_TABLE_MAC_BRIDGE_VAL1_STATIC) {
 			if (mac_bridge.val[0] & BIT(port)) {
 				err = cb(addr, 0, true, data);
 				if (err)
 					return err;
 			}
 		} else {
-			if (((mac_bridge.val[0] & GENMASK(7, 4)) >> 4) == port) {
+			if (port == FIELD_GET(GSWIP_TABLE_MAC_BRIDGE_VAL0_PORT,
+					      mac_bridge.val[0])) {
 				err = cb(addr, 0, false, data);
 				if (err)
 					return err;
Signature · 1 line
2.39.2
#11 lore raw

PATCH v3 10/12 net: dsa: lantiq_gswip: Remove dead code from gswip_add_single_port_br()

In reply to Martin Schiller

The port validation in gswip_add_single_port_br() is superfluous and can be omitted.

---
 drivers/net/dsa/lantiq_gswip.c | 6 ------
 1 file changed, 6 deletions(-)
drivers/net/dsa/lantiq_gswip.c +0 -6
index cd88b00cfdc1..2bbc7dd45418 100644
@@ -655,14 +655,8 @@ static int gswip_add_single_port_br(struct gswip_priv *priv, int port, bool add)
 	struct gswip_pce_table_entry vlan_active = {0,};
 	struct gswip_pce_table_entry vlan_mapping = {0,};
 	unsigned int cpu_port = priv->hw_info->cpu_port;
-	unsigned int max_ports = priv->hw_info->max_ports;
 	int err;
 
-	if (port >= max_ports) {
-		dev_err(priv->dev, "single port for %i supported\n", port);
-		return -EIO;
-	}
-
 	vlan_active.index = port + 1;
 	vlan_active.table = GSWIP_TABLE_ACTIVE_VLAN;
 	vlan_active.key[0] = 0; /* vid */
Signature · 1 line
2.39.2
#12 lore raw

PATCH v3 11/12 net: dsa: lantiq_gswip: Update comments in gswip_port_vlan_filtering()

In reply to Martin Schiller

From: Martin Blumenstingl <[email protected]>

Update the comments in gswip_port_vlan_filtering() so it's clear that there are two separate cases, one for "tag based VLAN" and another one for "port based VLAN".

---
 drivers/net/dsa/lantiq_gswip.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
drivers/net/dsa/lantiq_gswip.c +2 -2
index 2bbc7dd45418..ec52c62eadce 100644
@@ -780,7 +780,7 @@ static int gswip_port_vlan_filtering(struct dsa_switch *ds, int port,
 	}
 
 	if (vlan_filtering) {
-		/* Use port based VLAN tag */
+		/* Use tag based VLAN */
 		gswip_switch_mask(priv,
 				  GSWIP_PCE_VCTRL_VSR,
 				  GSWIP_PCE_VCTRL_UVR | GSWIP_PCE_VCTRL_VIMR |
@@ -789,7 +789,7 @@ static int gswip_port_vlan_filtering(struct dsa_switch *ds, int port,
 		gswip_switch_mask(priv, GSWIP_PCE_PCTRL_0_TVM, 0,
 				  GSWIP_PCE_PCTRL_0p(port));
 	} else {
-		/* Use port based VLAN tag */
+		/* Use port based VLAN */
 		gswip_switch_mask(priv,
 				  GSWIP_PCE_VCTRL_UVR | GSWIP_PCE_VCTRL_VIMR |
 				  GSWIP_PCE_VCTRL_VEMR,
Signature · 1 line
2.39.2
#13 lore raw

PATCH v3 12/12 net: dsa: lantiq_gswip: Improve error message in gswip_port_fdb()

In reply to Martin Schiller

From: Martin Blumenstingl <[email protected]>

Print that no FID is found for bridge %s instead of the incorrect message that the port is not part of a bridge.

---
 drivers/net/dsa/lantiq_gswip.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)
drivers/net/dsa/lantiq_gswip.c +2 -1
index ec52c62eadce..fcd4505f4925 100644
@@ -1370,7 +1370,8 @@ static int gswip_port_fdb(struct dsa_switch *ds, int port,
 	}
 
 	if (fid == -1) {
-		dev_err(priv->dev, "Port not part of a bridge\n");
+		dev_err(priv->dev, "no FID found for bridge %s\n",
+			bridge->name);
 		return -EINVAL;
 	}
 
Signature · 1 line
2.39.2