hw/dma: Add error handling for loading descriptions failing
v3 cover hw/dma: Add error handling for loading descriptions failing
The original code assumes that memory transmission is always successful, but in some cases, it gets bus-error.
Add error handling for DMA reading description failures. Do some reasonable settings, and return the corrected transmission size. Finally, return the error status.
* Fix the trace format for an unsigned variable
base-commit: d82f37faf5643897b2e61abb229499d64a51aa26
[v2]
* Add DMASR_DECERR case
* Squash the two commits to one
base-commit: 915758c537b5fe09575291f4acd87e2d377a93de
[v1]
base-commit: 1806da76cb81088ea026ca3441551782b850e393
Fea.Wang (3):
hw/dma: Enhance error handling in loading description hw/dma: Add a trace log for a description loading failure hw/net: Fix the transmission return size
Fea.Wang (3):
hw/dma: Enhance error handling in loading description hw/dma: Add a trace log for a description loading failure hw/net: Fix the transmission return size
hw/dma/trace-events | 3 +++ hw/dma/xilinx_axidma.c | 33 +++++++++++++++++++++++++++++---- hw/net/xilinx_axienet.c | 2 +- 3 files changed, 33 insertions(+), 5 deletions(-)
Signature · 1 line
2.34.1
PATCH v3 1/3 hw/dma: Enhance error handling in loading description
Loading a description from memory may cause a bus-error. In this case, the DMA should stop working, set the error flag, and return the failure value.
When calling the loading a description function, it should be noticed that the function may return a failure value. Breaking the loop in this case is one of the possible ways to handle it.
--- hw/dma/xilinx_axidma.c | 30 ++++++++++++++++++++++++++---- 1 file changed, 26 insertions(+), 4 deletions(-)
hw/dma/xilinx_axidma.c +26 -4
@@ -71,8 +71,11 @@ enum {enum {DMASR_HALTED =1 ,DMASR_IDLE =2 , +DMASR_SLVERR =1 <<5 , +DMASR_DECERR =1 <<6 ,DMASR_IOC_IRQ =1 <<12 ,DMASR_DLY_IRQ =1 <<13 , +DMASR_ERR_IRQ =1 <<14 ,DMASR_IRQ_MASK =7 <<12 };
@@ -190,17 +193,32 @@ static inline int streamid_from_addr(hwaddr addr)return sid; } -static void stream_desc_load (struct Stream *s,hwaddr addr) +static MemTxResult stream_desc_load (struct Stream *s,hwaddr addr) {struct SDesc *d = &s->desc; -address_space_read (&s->dma->as, addr,MEMTXATTRS_UNSPECIFIED , d,sizeof *d); +MemTxResult result =address_space_read (&s->dma->as, + addr,MEMTXATTRS_UNSPECIFIED , + d,sizeof *d); +if (result !=MEMTX_OK ) { +if (result ==MEMTX_DECODE_ERROR ) { + s->regs[R_DMASR ] |=DMASR_DECERR ; + }else { + s->regs[R_DMASR ] |=DMASR_SLVERR ; + } + + s->regs[R_DMACR ] &= ~DMACR_RUNSTOP ; + s->regs[R_DMASR ] |=DMASR_HALTED ; + s->regs[R_DMASR ] |=DMASR_ERR_IRQ ; +return result; + }/* Convert from LE into host endianness. */ d->buffer_address =le64_to_cpu (d->buffer_address); d->nxtdesc =le64_to_cpu (d->nxtdesc); d->control =le32_to_cpu (d->control); d->status =le32_to_cpu (d->status); +return result; }static void stream_desc_store (struct Stream *s,hwaddr addr)
@@ -279,7 +297,9 @@ static void stream_process_mem2s(struct Stream *s, StreamSink *tx_data_dev, }while (1 ) { -stream_desc_load (s, s->regs[R_CURDESC ]); +if (MEMTX_OK !=stream_desc_load (s, s->regs[R_CURDESC ])) { +break ; + }if (s->desc.status &SDESC_STATUS_COMPLETE ) { s->regs[R_DMASR ] |=DMASR_HALTED ;
@@ -336,7 +356,9 @@ static size_t stream_process_s2mem(struct Stream *s, unsigned char *buf, }while (len) { -stream_desc_load (s, s->regs[R_CURDESC ]); +if (MEMTX_OK !=stream_desc_load (s, s->regs[R_CURDESC ])) { +break ; + }if (s->desc.status &SDESC_STATUS_COMPLETE ) { s->regs[R_DMASR ] |=DMASR_HALTED ;
Signature · 1 line
2.34.1
PATCH v3 2/3 hw/dma: Add a trace log for a description loading failure
In reply to Fea.WangDue to a description loading failure, adding a trace log makes observing the DMA behavior easy.
--- hw/dma/trace-events | 3 +++ hw/dma/xilinx_axidma.c | 3 +++ 2 files changed, 6 insertions(+)
hw/dma/trace-events +3 -0
@@ -44,3 +44,6 @@ pl330_debug_exec_stall(void) "stall of debug instruction not implemented" pl330_iomem_write(uint32_t offset, uint32_t value) "addr: 0x%08"PRIx32" data: 0x%08"PRIx32 pl330_iomem_write_clr(int i) "event interrupt lowered %d" pl330_iomem_read(uint32_t addr, uint32_t data) "addr: 0x%08"PRIx32" data: 0x%08"PRIx32 + +# xilinx_axidma.c +xilinx_axidma_loading_desc_fail(uint32_t res) "error:%u"
hw/dma/xilinx_axidma.c +3 -0
@@ -36,6 +36,7 @@#include "sysemu/dma.h" #include "hw/stream.h" #include "qom/object.h" +#include "trace.h" #define D (x)
@@ -201,6 +202,8 @@ static MemTxResult stream_desc_load(struct Stream *s, hwaddr addr) addr,MEMTXATTRS_UNSPECIFIED , d, sizeof *d);if (result !=MEMTX_OK ) { +trace_xilinx_axidma_loading_desc_fail (result); +if (result ==MEMTX_DECODE_ERROR ) { s->regs[R_DMASR ] |=DMASR_DECERR ; }else {
Signature · 1 line
2.34.1
Re: [PATCH v3 2/3] hw/dma: Add a trace log for a description loading failure
Quoted 10 lines · Fea.Wang
Due to a description loading failure, adding a trace log makes observing the DMA behavior easy.
Signed-off-by Fea.Wang <[email protected]>Reviewed-by Edgar E. Iglesias <[email protected]>Reviewed-by Frank Chang <[email protected]>--- hw/dma/trace-events | 3 +++ hw/dma/xilinx_axidma.c | 3 +++ 2 files changed, 6 insertions(+)
PATCH v3 3/3 hw/net: Fix the transmission return size
In reply to Fea.WangFix the transmission return size because not all bytes could be transmitted successfully. So, return a successful length instead of a constant value.
--- hw/net/xilinx_axienet.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
hw/net/xilinx_axienet.c +1 -1
@@ -847,7 +847,7 @@ static ssize_t eth_rx(NetClientState *nc, const uint8_t *buf, size_t size)axienet_eth_rx_notify (s);enet_update_irq (s); -return size; +return s->rxpos; } static size_t
Signature · 1 line
2.34.1