Skip to contentSkip to conversation

dt-bindings: i2c: convert to dt schema

PATCH Superseded Kanak Shilledar 3 participants 3 messages Jun 19, 2024

Subsystems (3)

v1 of 3 Superseded Latest is v3 →

lore
Share & tools
lore
#0 lore raw

PATCH 1/1 dt-bindings: i2c: convert to dt schema

Convert the NXP I2C controller for LPC2xxx/178x/18xx/43xx to newer DT schema. Created DT schema based on the .txt file which had compatible, reg, interrupts, clocks, #address-cells and #size-cells as required properties.

Additional changes to the original .txt binding
- added maintainer from the MAINTAINERS file.
- added resets property required by the corresponding DTS files.

---
 .../devicetree/bindings/i2c/i2c-lpc2k.txt     | 33 ----------
 .../bindings/i2c/nxp,lpc1788-i2c.yaml         | 66 +++++++++++++++++++
 2 files changed, 66 insertions(+), 33 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/i2c/i2c-lpc2k.txt
 create mode 100644 Documentation/devicetree/bindings/i2c/nxp,lpc1788-i2c.yaml
Documentation/devicetree/bindings/i2c/i2c-lpc2k.txt deleted +0 -33
deleted file mode 100644
index 4101aa621ad4..000000000000
@@ -1,33 +0,0 @@
-NXP I2C controller for LPC2xxx/178x/18xx/43xx
-
-Required properties:
- - compatible: must be "nxp,lpc1788-i2c"
- - reg: physical address and length of the device registers
- - interrupts: a single interrupt specifier
- - clocks: clock for the device
- - #address-cells: should be <1>
- - #size-cells: should be <0>
-
-Optional properties:
-- clock-frequency: the desired I2C bus clock frequency in Hz; in
-  absence of this property the default value is used (100 kHz).
-
-Example:
-i2c0: i2c@400a1000 {
-	compatible = "nxp,lpc1788-i2c";
-	reg = <0x400a1000 0x1000>;
-	interrupts = <18>;
-	clocks = <&ccu1 CLK_APB1_I2C0>;
-	#address-cells = <1>;
-	#size-cells = <0>;
-};
-
-&i2c0 {
-	clock-frequency = <400000>;
-
-	lm75@48 {
-		compatible = "nxp,lm75";
-		reg = <0x48>;
-	};
-};
-
Documentation/devicetree/bindings/i2c/nxp,lpc1788-i2c.yaml new file +66 -0

66 lines not on this page · raw message

Signature · 1 line
2.45.2
#1 lore raw

On Wed, Jun 19, 2024 at 09:19:36PM +0530, Kanak Shilledar wrote:

$subject is missing a prefix for the device in question.

Quoted 16 lines
Documentation/devicetree/bindings/i2c/nxp,lpc1788-i2c.yaml new file +10 -0
new file mode 100644
index 000000000000..79d6774dd54f
@@ -0,0 +1,66 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/i2c/nxp,lpc1788-i2c.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NXP I2C controller for LPC2xxx/178x/18xx/43xx
+
+maintainers:
+  - Vladimir Zapolskiy <[email protected]>

Documentation/devicetree/bindings/i2c/nxp,lpc1788-i2c.yaml line 20

Quoted 10 lines
Documentation/devicetree/bindings/i2c/nxp,lpc1788-i2c.yaml new file +10 -0
+
+allOf:
+  - $ref: /schemas/i2c/i2c-controller.yaml#
+
+properties:
+  compatible:
+    const: nxp,lpc1788-i2c
+
+  reg:
+    description: physical address and length of the device registers

Drop all of these descriptions as they're obvious, other than...

Documentation/devicetree/bindings/i2c/nxp,lpc1788-i2c.yaml line 32

Quoted 12 lines
Documentation/devicetree/bindings/i2c/nxp,lpc1788-i2c.yaml new file +12 -0
+    maxItems: 1
+
+  interrupts:
+    description: a single interrupt specifier
+    maxItems: 1
+
+  clocks:
+    description: clock for the device
+    maxItems: 1
+
+  clock-frequency:
+    description: the desired I2C bus clock frequency in Hz

..maybe this one. Otherwise this looks okay to me.

Thanks,
Conor.

Documentation/devicetree/bindings/i2c/nxp,lpc1788-i2c.yaml line 43

Quoted 11 lines
Documentation/devicetree/bindings/i2c/nxp,lpc1788-i2c.yaml new file +11 -0
+    default: 100000
+
+  resets:
+    description: reset for the device
+    maxItems: 1
+
+  '#address-cells':
+    const: 1
+
+  '#size-cells':
+    const: 0

These two come for free with the ref to i2c-controller.yaml :)

Quoted 26 lines
Documentation/devicetree/bindings/i2c/nxp,lpc1788-i2c.yaml new file +23 -0
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - "#address-cells"
+  - "#size-cells"
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include "dt-bindings/clock/lpc18xx-ccu.h"
+
+    i2c@400a1000 {
+        compatible = "nxp,lpc1788-i2c";
+        reg = <0x400a1000 0x1000>;
+        interrupts = <18>;
+        clocks = <&ccu1 CLK_APB1_I2C0>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+    };
Signature · 1 line
2.45.2
#2 lore raw
In reply to Kanak Shilledar
kernel test robot noticed the following build warnings:

Hi Kanak,

kernel test robot noticed the following build warnings:

[auto build test WARNING on andi-shyti/i2c/i2c-host]
[also build test WARNING on linus/master v6.10-rc4 next-20240619] [If your patch is applied to the wrong git tree, kindly drop us a note. And when submitting patch, we suggest to use '--base' as documented in
https://git-scm.com/docs/git-format-patch#_base_tree_information]

url:    https://github.com/intel-lab-lkp/linux/commits/Kanak-Shilledar/dt-bindings-i2c-convert-to-dt-schema/20240620-000339
base:   git://git.kernel.org/pub/scm/linux/kernel/git/andi.shyti/linux.git i2c/i2c-host
patch link:    https://lore.kernel.org/r/20240619154941.144011-2-kanakshilledar%40gmail.com
patch subject: [PATCH] dt-bindings: i2c: convert to dt schema
reproduce: (https://download.01.org/0day-ci/archive/20240620/[email protected]/reproduce)

If you fix the issue in a separate patch/commit (i.e. not just a new version of the same patch/commit), kindly add following tags
| Reported-by: kernel test robot <[email protected]>
| Closes: https://lore.kernel.org/oe-kbuild-all/[email protected]/

All warnings (new ones prefixed by >>):

Warning: Documentation/devicetree/bindings/power/wakeup-source.txt references a file that doesn't exist: Documentation/devicetree/bindings/input/qcom,pm8xxx-keypad.txt
Warning: Documentation/devicetree/bindings/regulator/siliconmitus,sm5703-regulator.yaml references a file that doesn't exist: Documentation/devicetree/bindings/mfd/siliconmitus,sm5703.yaml

>> Warning: MAINTAINERS references a file that doesn't exist: Documentation/devicetree/bindings/i2c/i2c-lpc2k.txt

Warning: MAINTAINERS references a file that doesn't exist: Documentation/devicetree/bindings/reserved-memory/qcom
Warning: MAINTAINERS references a file that doesn't exist: Documentation/devicetree/bindings/display/exynos/ Using alabaster theme

Signature · 2 lines
0-DAY CI Kernel Test Service
https://github.com/intel/lkp-tests/wiki