DC Patches June 20, 2024
Subsystems (5)
cover DC Patches June 20, 2024
This DC patchset brings improvements in multiple areas. In summary, we highlight:
* Enable DCC on DCN401
* Fix cursor issues
* Misc Coverity fixes
Alex Hung (12):
drm/amd/display: Remove redundant checks for pipe_ctx->stream drm/amd/display: Run DC_LOG_DC after checking link->link_enc drm/amd/display: Fix uninitialized variables in dcn401 drm/amd/display: Remove useless function call drm/amd/display: Check and log for function error codes drm/amd/display: Check and log for function error codes drm/amd/display: Check HDCP returned status drm/amd/display: Add null checks before accessing struct elements drm/amd/display: Ensure curve to hw translation succeed drm/amd/display: Validate function returns drm/amd/display: Remove always true condition drm/amd/display: Remove duplicate null check
Alvin Lee (2):
drm/amd/display: Program CURSOR_DST_X_OFFSET in viewport space drm/amd/display: Wait for double buffer update on ODM changes
Aric Cyr (1):
drm/amd/display: 3.2.290
Aurabindo Pillai (3):
drm/amd/display: Use sw cursor for DCN401 with rotation drm/amd: Add reg definitions for DCN401 DCC drm/amd/display: Enable DCC on DCN401
Daniel Sa (1):
drm/amd/display: Fix reduced resolution and refresh rate
Dillon Varone (1):
drm/amd/display: Make DML2.1 P-State method force per stream
Duncan Ma (1):
drm/amd/display: Reset DSC memory status
George Shen (1):
drm/amd/display: Call dpmm when checking mode support
Ivan Lipski (2):
drm/amd/display: Remove redundant var from display_rq_dig_calc in dml drm/amd/display: Remove unnecessary variable
Joan Lee (1):
drm/amd/display: Add Replay general cmd
Leo (Hanghong) Ma (1):
drm/amd/display: Always enable HPO for DCN4 dGPU
Michael Strauss (1):
drm/amd/display: Send DP_TOTAL_LTTPR_CNT during detection if LTTPR is
present
Nevenko Stupar (3):
drm/amd/display: Fix cursor issues with ODMs and HW rotations drm/amd/display: Fix cursor size issues drm/amd/display: Fix cursor issues with ODMs and magnification
Nicholas Susanto (1):
drm/amd/display: Temporarily disable HPO PG on DCN35
Relja Vojvodic (2):
drm/amd/display: Refactor dccg401_get_other_enable_symclk_fe drm/amd/display: Fix 1DLUT setting for NL SDR blending
Roman Li (1):
drm/amd/display: Use periodic detection for ipx/headless
Ryan Seto (2):
drm/amd/display: Add HW cursor visual confirm drm/amd/display: Adjust reg field for DSC wait for disconnect
Sung-huai Wang (1):
drm/amd/display: Add workaround to restrict max frac urgent for DPM0
TungYu Lu (1):
drm/amd/display: resync OTG after DIO FIFO resync
Wenjing Liu (1):
drm/amd/display: Remove a redundant check in authenticated_dp
.../gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c | 39 ++- .../gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.h | 3 + .../amd/display/amdgpu_dm/amdgpu_dm_crtc.c | 48 ++- .../amd/display/amdgpu_dm/amdgpu_dm_debugfs.c | 5 +- .../amd/display/amdgpu_dm/amdgpu_dm_helpers.c | 5 +- .../drm/amd/display/dc/bios/command_table2.c | 3 +- .../dc/clk_mgr/dcn201/dcn201_clk_mgr.c | 2 - .../display/dc/clk_mgr/dcn32/dcn32_clk_mgr.c | 10 +- .../dc/clk_mgr/dcn401/dcn401_clk_mgr.c | 10 +- drivers/gpu/drm/amd/display/dc/core/dc.c | 12 + .../drm/amd/display/dc/core/dc_hw_sequencer.c | 11 + .../gpu/drm/amd/display/dc/core/dc_stream.c | 29 ++ drivers/gpu/drm/amd/display/dc/dc.h | 9 +- drivers/gpu/drm/amd/display/dc/dc_dmub_srv.c | 7 +- drivers/gpu/drm/amd/display/dc/dc_types.h | 1 + .../amd/display/dc/dccg/dcn401/dcn401_dccg.c | 57 ++-- .../drm/amd/display/dc/dce/dce_link_encoder.c | 5 +- .../gpu/drm/amd/display/dc/dce/dmub_replay.c | 18 +- .../amd/display/dc/dcn10/dcn10_link_encoder.c | 8 +- .../drm/amd/display/dc/dml/dcn20/dcn20_fpu.c | 2 +- .../dc/dml/dcn20/display_rq_dlg_calc_20.c | 14 +- .../dc/dml/dcn20/display_rq_dlg_calc_20v2.c | 14 +- .../dc/dml/dcn21/display_rq_dlg_calc_21.c | 14 +- .../dc/dml/dcn30/display_rq_dlg_calc_30.c | 14 +- .../dc/dml/dcn31/display_rq_dlg_calc_31.c | 14 +- .../dc/dml/dcn314/display_rq_dlg_calc_314.c | 14 +- .../dc/dml2/dml21/dml21_translation_helper.c | 2 +- .../amd/display/dc/dml2/dml21/dml21_wrapper.c | 4 +- .../src/dml2_core/dml2_core_dcn4_calcs.c | 4 +- .../dc/dml2/dml21/src/dml2_top/dml_top.c | 17 ++ .../src/inc/dml2_internal_shared_types.h | 1 + .../drm/amd/display/dc/dml2/dml2_wrapper.c | 29 +- .../drm/amd/display/dc/dml2/dml2_wrapper.h | 6 +- .../amd/display/dc/dpp/dcn401/dcn401_dpp_cm.c | 50 ---- .../drm/amd/display/dc/dsc/dcn20/dcn20_dsc.c | 24 +- .../drm/amd/display/dc/dsc/dcn20/dcn20_dsc.h | 13 +- .../drm/amd/display/dc/dsc/dcn35/dcn35_dsc.c | 58 +++- .../amd/display/dc/dsc/dcn401/dcn401_dsc.c | 2 +- .../amd/display/dc/dsc/dcn401/dcn401_dsc.h | 3 +- .../display/dc/hubbub/dcn20/dcn20_hubbub.c | 3 +- .../display/dc/hubbub/dcn30/dcn30_hubbub.c | 3 + .../display/dc/hubbub/dcn31/dcn31_hubbub.c | 3 + .../display/dc/hubbub/dcn401/dcn401_hubbub.c | 280 ++++++++++++++++++ .../display/dc/hubbub/dcn401/dcn401_hubbub.h | 5 + .../amd/display/dc/hubp/dcn20/dcn20_hubp.h | 14 + .../amd/display/dc/hubp/dcn401/dcn401_hubp.c | 71 ++--- .../amd/display/dc/hubp/dcn401/dcn401_hubp.h | 14 +- .../amd/display/dc/hwss/dcn10/dcn10_hwseq.c | 17 -- .../amd/display/dc/hwss/dcn20/dcn20_hwseq.c | 34 ++- .../amd/display/dc/hwss/dcn30/dcn30_hwseq.c | 5 +- .../amd/display/dc/hwss/dcn32/dcn32_hwseq.c | 11 +- .../amd/display/dc/hwss/dcn401/dcn401_hwseq.c | 169 ++++------- .../amd/display/dc/hwss/dcn401/dcn401_hwseq.h | 2 + .../amd/display/dc/hwss/dcn401/dcn401_init.c | 2 +- .../drm/amd/display/dc/hwss/hw_sequencer.h | 9 + .../gpu/drm/amd/display/dc/inc/core_types.h | 3 + .../gpu/drm/amd/display/dc/inc/hw/dchubbub.h | 4 + drivers/gpu/drm/amd/display/dc/inc/hw/hubp.h | 1 + .../amd/display/dc/inc/hw/timing_generator.h | 1 + .../display/dc/link/accessories/link_dp_cts.c | 2 +- .../drm/amd/display/dc/link/link_factory.c | 6 +- .../dc/link/protocols/link_dp_capability.c | 31 +- .../dc/link/protocols/link_dp_training.c | 3 +- .../amd/display/dc/optc/dcn10/dcn10_optc.h | 3 +- .../amd/display/dc/optc/dcn32/dcn32_optc.c | 13 + .../amd/display/dc/optc/dcn32/dcn32_optc.h | 2 + .../amd/display/dc/optc/dcn401/dcn401_optc.c | 1 + .../amd/display/dc/optc/dcn401/dcn401_optc.h | 1 + .../dc/resource/dcn35/dcn35_resource.c | 5 +- .../dc/resource/dcn401/dcn401_resource.c | 9 + .../dc/resource/dcn401/dcn401_resource.h | 2 + .../gpu/drm/amd/display/include/dpcd_defs.h | 5 + .../display/modules/hdcp/hdcp1_execution.c | 24 +- .../drm/amd/display/modules/hdcp/hdcp_psp.c | 3 - .../include/asic_reg/dcn/dcn_4_1_0_sh_mask.h | 110 +++++++ 75 files changed, 1021 insertions(+), 431 deletions(-)
Signature · 1 line
2.34.1
PATCH 1/39 drm/amd/display: Temporarily disable HPO PG on DCN35
From: Nicholas Susanto <[email protected]>
[WHY]
On hotpluggin a 4k144 HDMI FRL setup, display fails FRL link training and falls back to TMDS which is caused by driver not ungating HPO before doing FRL link training.
[HOW]
Enable debug flag to disable HPO power gate in DCN35
--- drivers/gpu/drm/amd/display/dc/resource/dcn35/dcn35_resource.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/gpu/drm/amd/display/dc/resource/dcn35/dcn35_resource.c +1 -1
@@ -721,7 +721,7 @@ static const struct dc_debug_options debug_defaults_drv = { .disable_dpp_power_gate = true, .disable_hubp_power_gate = true, .disable_optc_power_gate = true, /*should the same as above two*/ - .disable_hpo_power_gate = false, /*dmubfw force domain25 on*/ + .disable_hpo_power_gate = true, /*dmubfw force domain25 on*/ .disable_clock_gate = false, .disable_dsc_power_gate = true, .vsr_support = true,
Signature · 1 line
2.34.1
PATCH 2/39 drm/amd/display: Refactor dccg401_get_other_enable_symclk_fe
In reply to Alex HungFrom: Relja Vojvodic <[email protected]>
[WHY]
Function was used to check the number of FEs connected to the current BE. This was then used to determine if the symclk could be disabled, if all FEs were disconnected. However, the function would skip over the primary FE and return 0 when the primary FE was still connected. This caused black screens on driver disable with an MST daisy chain hooked up.
[HOW]
Refactored the function to correctly return the number of FEs connected to the input BE. Also renamed it for clarity.
--- .../amd/display/dc/dccg/dcn401/dcn401_dccg.c | 57 +++++++------------ 1 file changed, 22 insertions(+), 35 deletions(-)
drivers/gpu/drm/amd/display/dc/dccg/dcn401/dcn401_dccg.c +22 -35
@@ -853,43 +853,30 @@ static void dccg401_enable_symclk_se(struct dccg *dccg, uint32_t stream_enc_inst }/*get other front end connected to this backend*/ -static uint8_t dccg401_get_other_enabled_symclk_fe (struct dccg *dccg,uint32_t stream_enc_inst,uint32_t link_enc_inst) +static uint8_t dccg401_get_number_enabled_symclk_fe_connected_to_be (struct dccg *dccg,uint32_t link_enc_inst) {uint8_t num_enabled_symclk_fe =0 ; -uint32_t be_clk_en =0 , fe_clk_en[4 ] = {0 }, be_clk_sel[4 ] = {0 }; +uint32_t fe_clk_en[4 ] = {0 }, be_clk_sel[4 ] = {0 };struct dcn_dccg *dccg_dcn =TO_DCN_DCCG (dccg); +uint8_t i; -switch (link_enc_inst) { -case 0 : -REG_GET_3 (SYMCLKA_CLOCK_ENABLE ,SYMCLKA_CLOCK_ENABLE , &be_clk_en, -SYMCLKA_FE_EN , &fe_clk_en[0 ], -SYMCLKA_FE_SRC_SEL , &be_clk_sel[0 ]); -break ; -case 1 : -REG_GET_3 (SYMCLKB_CLOCK_ENABLE ,SYMCLKB_CLOCK_ENABLE , &be_clk_en, -SYMCLKB_FE_EN , &fe_clk_en[1 ], -SYMCLKB_FE_SRC_SEL , &be_clk_sel[1 ]); -break ; -case 2 : -REG_GET_3 (SYMCLKC_CLOCK_ENABLE ,SYMCLKC_CLOCK_ENABLE , &be_clk_en, -SYMCLKC_FE_EN , &fe_clk_en[2 ], -SYMCLKC_FE_SRC_SEL , &be_clk_sel[2 ]); -break ; -case 3 : -REG_GET_3 (SYMCLKD_CLOCK_ENABLE ,SYMCLKD_CLOCK_ENABLE , &be_clk_en, -SYMCLKD_FE_EN , &fe_clk_en[3 ], -SYMCLKD_FE_SRC_SEL , &be_clk_sel[3 ]); -break ; - } -if (be_clk_en) { -/* for DPMST, this backend could be used by multiple front end. -only disable the backend if this stream_enc_ins is the last active stream enc connected to this back_end*/ -uint8_t i; -for (i =0 ; i != link_enc_inst && i <ARRAY_SIZE (fe_clk_en); i++) { -if (fe_clk_en[i] && be_clk_sel[i] == link_enc_inst) - num_enabled_symclk_fe++; - } +REG_GET_2 (SYMCLKA_CLOCK_ENABLE ,SYMCLKA_FE_EN , &fe_clk_en[0 ], +SYMCLKA_FE_SRC_SEL , &be_clk_sel[0 ]); + +REG_GET_2 (SYMCLKB_CLOCK_ENABLE ,SYMCLKB_FE_EN , &fe_clk_en[1 ], +SYMCLKB_FE_SRC_SEL , &be_clk_sel[1 ]); + +REG_GET_2 (SYMCLKC_CLOCK_ENABLE ,SYMCLKC_FE_EN , &fe_clk_en[2 ], +SYMCLKC_FE_SRC_SEL , &be_clk_sel[2 ]); + +REG_GET_2 (SYMCLKD_CLOCK_ENABLE ,SYMCLKD_FE_EN , &fe_clk_en[3 ], +SYMCLKD_FE_SRC_SEL , &be_clk_sel[3 ]); + +for (i =0 ; i <ARRAY_SIZE (fe_clk_en); i++) { +if (fe_clk_en[i] && be_clk_sel[i] == link_enc_inst) + num_enabled_symclk_fe++; } +return num_enabled_symclk_fe; }
@@ -921,9 +908,9 @@ static void dccg401_disable_symclk_se(struct dccg *dccg, uint32_t stream_enc_insbreak ; } -/*check other enabled symclk fe */ - num_enabled_symclk_fe =dccg401_get_other_enabled_symclk_fe (dccg, stream_enc_inst, link_enc_inst); -/*only turn off backend clk if other front end attachecd to this backend are all off, +/*check other enabled symclk fe connected to this be */ + num_enabled_symclk_fe =dccg401_get_number_enabled_symclk_fe_connected_to_be (dccg, link_enc_inst); +/*only turn off backend clk if other front ends attached to this backend are all off, for mst, only turn off the backend if this is the last front end*/ if (num_enabled_symclk_fe ==0 ) {switch (link_enc_inst) {
Signature · 1 line
2.34.1
PATCH 3/39 drm/amd/display: Remove redundant var from display_rq_dig_calc in dml
In reply to Alex HungFrom: Ivan Lipski <[email protected]>
[WHY]
Coverity analysis flagged these files as containing DEADCODE, i. e. redundant or unreachabale. In these files, variable 'mode_422' is always the same file (0 or false), so any code logic with it is redundant.
[HOW]
Removed 'mode_422' variable and all code with it from 'display_rq_dlg_calc_' functions in dml.
--- .../display/dc/dml/dcn20/display_rq_dlg_calc_20.c | 14 +++----------- .../dc/dml/dcn20/display_rq_dlg_calc_20v2.c | 14 +++----------- .../display/dc/dml/dcn21/display_rq_dlg_calc_21.c | 14 +++----------- .../display/dc/dml/dcn30/display_rq_dlg_calc_30.c | 14 +++----------- .../display/dc/dml/dcn31/display_rq_dlg_calc_31.c | 14 +++----------- .../dc/dml/dcn314/display_rq_dlg_calc_314.c | 14 +++----------- 6 files changed, 18 insertions(+), 66 deletions(-)
drivers/gpu/drm/amd/display/dc/dml/dcn20/display_rq_dlg_calc_20.c +3 -11
@@ -688,12 +688,11 @@ static void get_surf_rq_param(struct display_mode_lib *mode_lib,const display_pipe_source_params_st *pipe_src_param, bool is_chroma) { - bool mode_422 = false; unsigned int vp_width = 0;unsigned int vp_height =0 ;unsigned int data_pitch =0 ;unsigned int meta_pitch =0 ; -unsigned int ppe = mode_422 ?2 :1 ; +unsigned int ppe =1 ;// TODO check if ppe apply for both luma and chroma in 422 case if (is_chroma) {
@@ -825,7 +824,6 @@ static void dml20_rq_dlg_get_dlg_params(struct display_mode_lib *mode_lib,double min_dst_y_ttu_vblank;unsigned int dlg_vblank_start;bool dual_plane; -bool mode_422;unsigned int access_dir;unsigned int vp_height_l;unsigned int vp_width_l;
@@ -971,7 +969,6 @@ static void dml20_rq_dlg_get_dlg_params(struct display_mode_lib *mode_lib,// Source // dcc_en = src.dcc; dual_plane =is_dual_plane ((enum source_format_class )(src->source_format)); - mode_422 = false;// TODO access_dir = (src->source_scan == dm_vert);// vp access direction: horizontal or vertical accessed // bytes_per_element_l = get_bytes_per_element(source_format_class(src.source_format), 0); // bytes_per_element_c = get_bytes_per_element(source_format_class(src.source_format), 1);
@@ -1148,13 +1145,8 @@ static void dml20_rq_dlg_get_dlg_params(struct display_mode_lib *mode_lib, dpte_row_height_l = rq_dlg_param->rq_l.dpte_row_height; dpte_row_height_c = rq_dlg_param->rq_c.dpte_row_height; -if (mode_422) { - swath_width_pixels_ub_l = swath_width_ub_l *2 ;// *2 for 2 pixel per element - swath_width_pixels_ub_c = swath_width_ub_c *2 ; - }else { - swath_width_pixels_ub_l = swath_width_ub_l *1 ; - swath_width_pixels_ub_c = swath_width_ub_c *1 ; - } + swath_width_pixels_ub_l = swath_width_ub_l; + swath_width_pixels_ub_c = swath_width_ub_c;if (htaps_l <=1 ) min_hratio_fact_l =2.0 ;
drivers/gpu/drm/amd/display/dc/dml/dcn20/display_rq_dlg_calc_20v2.c +3 -11
@@ -688,12 +688,11 @@ static void get_surf_rq_param(struct display_mode_lib *mode_lib,const display_pipe_source_params_st *pipe_src_param, bool is_chroma) { - bool mode_422 = false; unsigned int vp_width = 0;unsigned int vp_height =0 ;unsigned int data_pitch =0 ;unsigned int meta_pitch =0 ; -unsigned int ppe = mode_422 ?2 :1 ; +unsigned int ppe =1 ;// TODO check if ppe apply for both luma and chroma in 422 case if (is_chroma) {
@@ -825,7 +824,6 @@ static void dml20v2_rq_dlg_get_dlg_params(struct display_mode_lib *mode_lib,double min_dst_y_ttu_vblank;unsigned int dlg_vblank_start;bool dual_plane; -bool mode_422;unsigned int access_dir;unsigned int vp_height_l;unsigned int vp_width_l;
@@ -972,7 +970,6 @@ static void dml20v2_rq_dlg_get_dlg_params(struct display_mode_lib *mode_lib,// Source // dcc_en = src.dcc; dual_plane =is_dual_plane ((enum source_format_class )(src->source_format)); - mode_422 = false;// TODO access_dir = (src->source_scan == dm_vert);// vp access direction: horizontal or vertical accessed // bytes_per_element_l = get_bytes_per_element(source_format_class(src.source_format), 0); // bytes_per_element_c = get_bytes_per_element(source_format_class(src.source_format), 1);
@@ -1149,13 +1146,8 @@ static void dml20v2_rq_dlg_get_dlg_params(struct display_mode_lib *mode_lib, dpte_row_height_l = rq_dlg_param->rq_l.dpte_row_height; dpte_row_height_c = rq_dlg_param->rq_c.dpte_row_height; -if (mode_422) { - swath_width_pixels_ub_l = swath_width_ub_l *2 ;// *2 for 2 pixel per element - swath_width_pixels_ub_c = swath_width_ub_c *2 ; - }else { - swath_width_pixels_ub_l = swath_width_ub_l *1 ; - swath_width_pixels_ub_c = swath_width_ub_c *1 ; - } + swath_width_pixels_ub_l = swath_width_ub_l; + swath_width_pixels_ub_c = swath_width_ub_c;if (htaps_l <=1 ) min_hratio_fact_l =2.0 ;
drivers/gpu/drm/amd/display/dc/dml/dcn21/display_rq_dlg_calc_21.c +3 -11
@@ -694,12 +694,11 @@ static void get_surf_rq_param(const display_pipe_params_st *pipe_param, bool is_chroma) { - bool mode_422 = false; unsigned int vp_width = 0;unsigned int vp_height =0 ;unsigned int data_pitch =0 ;unsigned int meta_pitch =0 ; -unsigned int ppe = mode_422 ?2 :1 ; +unsigned int ppe =1 ;// FIXME check if ppe apply for both luma and chroma in 422 case if (is_chroma) {
@@ -868,7 +867,6 @@ static void dml_rq_dlg_get_dlg_params(double min_dst_y_ttu_vblank;unsigned int dlg_vblank_start;bool dual_plane; -bool mode_422;unsigned int access_dir;unsigned int vp_height_l;unsigned int vp_width_l;
@@ -1020,7 +1018,6 @@ static void dml_rq_dlg_get_dlg_params(// Source // dcc_en = src.dcc; dual_plane =is_dual_plane ((enum source_format_class ) (src->source_format)); - mode_422 = false;// FIXME access_dir = (src->source_scan == dm_vert);// vp access direction: horizontal or vertical accessed // bytes_per_element_l = get_bytes_per_element(source_format_class(src.source_format), 0); // bytes_per_element_c = get_bytes_per_element(source_format_class(src.source_format), 1);
@@ -1197,13 +1194,8 @@ static void dml_rq_dlg_get_dlg_params( dpte_row_height_l = rq_dlg_param->rq_l.dpte_row_height; dpte_row_height_c = rq_dlg_param->rq_c.dpte_row_height; -if (mode_422) { - swath_width_pixels_ub_l = swath_width_ub_l *2 ;// *2 for 2 pixel per element - swath_width_pixels_ub_c = swath_width_ub_c *2 ; - }else { - swath_width_pixels_ub_l = swath_width_ub_l *1 ; - swath_width_pixels_ub_c = swath_width_ub_c *1 ; - } + swath_width_pixels_ub_l = swath_width_ub_l; + swath_width_pixels_ub_c = swath_width_ub_c;if (hratio_l <=1 ) min_hratio_fact_l =2.0 ;
drivers/gpu/drm/amd/display/dc/dml/dcn30/display_rq_dlg_calc_30.c +3 -11
@@ -660,13 +660,12 @@ static void get_surf_rq_param(struct display_mode_lib *mode_lib, bool is_chroma, bool is_alpha) { - bool mode_422 = 0;unsigned int vp_width =0 ;unsigned int vp_height =0 ;unsigned int data_pitch =0 ;unsigned int meta_pitch =0 ;unsigned int surface_height =0 ; -unsigned int ppe = mode_422 ?2 :1 ; +unsigned int ppe =1 ;// FIXME check if ppe apply for both luma and chroma in 422 case if (is_chroma | is_alpha) {
@@ -934,7 +933,6 @@ static void dml_rq_dlg_get_dlg_params(struct display_mode_lib *mode_lib,double min_dst_y_ttu_vblank =0 ;unsigned int dlg_vblank_start =0 ;bool dual_plane = false; -bool mode_422 = false;unsigned int access_dir =0 ;unsigned int vp_height_l =0 ;unsigned int vp_width_l =0 ;
@@ -1083,7 +1081,6 @@ static void dml_rq_dlg_get_dlg_params(struct display_mode_lib *mode_lib,// Source // dcc_en = src.dcc; dual_plane =is_dual_plane ((enum source_format_class )(src->source_format)); - mode_422 = false;// TODO access_dir = (src->source_scan == dm_vert);// vp access direction: horizontal or vertical accessed vp_height_l = src->viewport_height; vp_width_l = src->viewport_width;
@@ -1301,13 +1298,8 @@ static void dml_rq_dlg_get_dlg_params(struct display_mode_lib *mode_lib, dpte_row_height_l = rq_dlg_param.rq_l.dpte_row_height; dpte_row_height_c = rq_dlg_param.rq_c.dpte_row_height; -if (mode_422) { - swath_width_pixels_ub_l = swath_width_ub_l *2 ;// *2 for 2 pixel per element - swath_width_pixels_ub_c = swath_width_ub_c *2 ; - }else { - swath_width_pixels_ub_l = swath_width_ub_l *1 ; - swath_width_pixels_ub_c = swath_width_ub_c *1 ; - } + swath_width_pixels_ub_l = swath_width_ub_l; + swath_width_pixels_ub_c = swath_width_ub_c;if (hratio_l <=1 ) min_hratio_fact_l =2.0 ;
drivers/gpu/drm/amd/display/dc/dml/dcn31/display_rq_dlg_calc_31.c +3 -11
@@ -655,13 +655,12 @@ static void get_surf_rq_param( bool is_chroma, bool is_alpha) { - bool mode_422 = 0;unsigned int vp_width =0 ;unsigned int vp_height =0 ;unsigned int data_pitch =0 ;unsigned int meta_pitch =0 ;unsigned int surface_height =0 ; -unsigned int ppe = mode_422 ?2 :1 ; +unsigned int ppe =1 ;// FIXME check if ppe apply for both luma and chroma in 422 case if (is_chroma | is_alpha) {
@@ -888,7 +887,6 @@ static void dml_rq_dlg_get_dlg_params(double min_ttu_vblank;unsigned int dlg_vblank_start;bool dual_plane; -bool mode_422;unsigned int access_dir;unsigned int vp_height_l;unsigned int vp_width_l;
@@ -1004,7 +1002,6 @@ static void dml_rq_dlg_get_dlg_params(// Prefetch Calc // Source dual_plane =is_dual_plane ((enum source_format_class ) (src->source_format)); - mode_422 =0 ; access_dir = (src->source_scan == dm_vert);// vp access direction: horizontal or vertical accessed vp_height_l = src->viewport_height; vp_width_l = src->viewport_width;
@@ -1142,13 +1139,8 @@ static void dml_rq_dlg_get_dlg_params( dpte_row_height_l = rq_dlg_param->rq_l.dpte_row_height; dpte_row_height_c = rq_dlg_param->rq_c.dpte_row_height; -if (mode_422) { - swath_width_pixels_ub_l = swath_width_ub_l *2 ;// *2 for 2 pixel per element - swath_width_pixels_ub_c = swath_width_ub_c *2 ; - }else { - swath_width_pixels_ub_l = swath_width_ub_l *1 ; - swath_width_pixels_ub_c = swath_width_ub_c *1 ; - } + swath_width_pixels_ub_l = swath_width_ub_l; + swath_width_pixels_ub_c = swath_width_ub_c;if (hratio_l <=1 ) min_hratio_fact_l =2.0 ;
drivers/gpu/drm/amd/display/dc/dml/dcn314/display_rq_dlg_calc_314.c +3 -11
@@ -743,13 +743,12 @@ static void get_surf_rq_param( bool is_chroma, bool is_alpha) { - bool mode_422 = 0;unsigned int vp_width =0 ;unsigned int vp_height =0 ;unsigned int data_pitch =0 ;unsigned int meta_pitch =0 ;unsigned int surface_height =0 ; -unsigned int ppe = mode_422 ?2 :1 ; +unsigned int ppe =1 ;// FIXME check if ppe apply for both luma and chroma in 422 case if (is_chroma | is_alpha) {
@@ -973,7 +972,6 @@ static void dml_rq_dlg_get_dlg_params(double min_ttu_vblank;unsigned int dlg_vblank_start;bool dual_plane; -bool mode_422;unsigned int access_dir;unsigned int vp_height_l;unsigned int vp_width_l;
@@ -1091,7 +1089,6 @@ static void dml_rq_dlg_get_dlg_params(// Prefetch Calc // Source dual_plane =is_dual_plane ((enum source_format_class ) (src->source_format)); - mode_422 =0 ; access_dir = (src->source_scan == dm_vert);// vp access direction: horizontal or vertical accessed vp_height_l = src->viewport_height; vp_width_l = src->viewport_width;
@@ -1230,13 +1227,8 @@ static void dml_rq_dlg_get_dlg_params( dpte_row_height_l = rq_dlg_param->rq_l.dpte_row_height; dpte_row_height_c = rq_dlg_param->rq_c.dpte_row_height; -if (mode_422) { - swath_width_pixels_ub_l = swath_width_ub_l *2 ;// *2 for 2 pixel per element - swath_width_pixels_ub_c = swath_width_ub_c *2 ; - }else { - swath_width_pixels_ub_l = swath_width_ub_l *1 ; - swath_width_pixels_ub_c = swath_width_ub_c *1 ; - } + swath_width_pixels_ub_l = swath_width_ub_l; + swath_width_pixels_ub_c = swath_width_ub_c;if (hratio_l <=1 ) min_hratio_fact_l =2.0 ;
Signature · 1 line
2.34.1
PATCH 4/39 drm/amd/display: Remove unnecessary variable
In reply to Alex HungFrom: Ivan Lipski <[email protected]>
[WHY]
Coverity analysis flagged this code as DEADCODE because the condition '(!need_recovery)' is never true.
The variable 'need_recovery' is initialized as 'true', is not assigned to 'false' anywhere before the conditional statement.
Since the variable is only used for the conditional check, but the check can never be true, the variable itself is redundant.
[HOW]
Removed the variable 'need_recovery'.
--- .../drm/amd/display/dc/hwss/dcn10/dcn10_hwseq.c | 17 ----------------- 1 file changed, 17 deletions(-)
drivers/gpu/drm/amd/display/dc/hwss/dcn10/dcn10_hwseq.c +0 -17
@@ -1134,26 +1134,9 @@ static bool dcn10_hw_wa_force_recovery(struct dc *dc) {struct hubp *hubp ;unsigned int i; -bool need_recover = true;if (!dc->debug.recovery_enabled)return false; - -for (i =0 ; i < dc->res_pool->pipe_count; i++) { -struct pipe_ctx *pipe_ctx = - &dc->current_state->res_ctx.pipe_ctx[i]; -if (pipe_ctx !=NULL ) { - hubp = pipe_ctx->plane_res.hubp; -if (hubp !=NULL && hubp->funcs->hubp_get_underflow_status) { -if (hubp->funcs->hubp_get_underflow_status (hubp) !=0 ) { -/* one pipe underflow, we will reset all the pipes*/ - need_recover = true; - } - } - } - } -if (!need_recover) -return false;/* DCHUBP_CNTL:HUBP_BLANK_EN=1 DCHUBBUB_SOFT_RESET:DCHUBBUB_GLOBAL_SOFT_RESET=1
Signature · 1 line
2.34.1
PATCH 5/39 drm/amd/display: Fix cursor issues with ODMs and HW rotations
In reply to Alex HungFrom: Nevenko Stupar <[email protected]>
[WHY & HOW]
Current code for cursor positions does not work properly with different ODM options and HW rotations like ODM 2to1, 3to1 and 4to1, and has different issues depending on angle of HW rotations.
[HOW]
Fixed these issues so to work properly when ODM is used with HW rotations.
--- .../amd/display/dc/dpp/dcn401/dcn401_dpp_cm.c | 50 ------- .../amd/display/dc/hubp/dcn401/dcn401_hubp.c | 38 ----- .../amd/display/dc/hwss/dcn401/dcn401_hwseq.c | 135 +++--------------- 3 files changed, 19 insertions(+), 204 deletions(-)
drivers/gpu/drm/amd/display/dc/dpp/dcn401/dcn401_dpp_cm.c +0 -50
@@ -153,58 +153,8 @@ void dpp401_set_cursor_position( uint32_t height) {struct dcn401_dpp *dpp =TO_DCN401_DPP (dpp_base); -int x_pos = pos->x - param->recout.x; -int y_pos = pos->y - param->recout.y; -int x_hotspot = pos->x_hotspot; -int y_hotspot = pos->y_hotspot; -int rec_x_offset = x_pos - pos->x_hotspot; -int rec_y_offset = y_pos - pos->y_hotspot; -int cursor_height = (int )height; -int cursor_width = (int )width;uint32_t cur_en = pos->enable ?1 :0 ; -// Transform cursor width / height and hotspots for offset calculations -if (param->rotation ==ROTATION_ANGLE_90 || param->rotation ==ROTATION_ANGLE_270 ) { -swap (cursor_height, cursor_width); -swap (x_hotspot, y_hotspot); - -if (param->rotation ==ROTATION_ANGLE_90 ) { -// hotspot = (-y, x) - rec_x_offset = x_pos - (cursor_width - x_hotspot); - rec_y_offset = y_pos - y_hotspot; - }else if (param->rotation ==ROTATION_ANGLE_270 ) { -// hotspot = (y, -x) - rec_x_offset = x_pos - x_hotspot; - rec_y_offset = y_pos - (cursor_height - y_hotspot); - } - }else if (param->rotation ==ROTATION_ANGLE_180 ) { -// hotspot = (-x, -y) -if (!param->mirror) - rec_x_offset = x_pos - (cursor_width - x_hotspot); - - rec_y_offset = y_pos - (cursor_height - y_hotspot); - } - -if (param->rotation ==ROTATION_ANGLE_0 && !param->mirror) { -if (rec_x_offset >= (int )param->recout.width) - cur_en =0 ;/* not visible beyond right edge*/ - -if (rec_y_offset >= (int )param->recout.height) - cur_en =0 ;/* not visible beyond bottom edge*/ - }else { -if (rec_x_offset > (int )param->recout.width) - cur_en =0 ;/* not visible beyond right edge*/ - -if (rec_y_offset > (int )param->recout.height) - cur_en =0 ;/* not visible beyond bottom edge*/ - } - -if (rec_x_offset + cursor_width <=0 ) - cur_en =0 ;/* not visible beyond left edge*/ - -if (rec_y_offset + cursor_height <=0 ) - cur_en =0 ;/* not visible beyond top edge*/ -REG_UPDATE (CURSOR0_CONTROL ,CUR0_ENABLE , cur_en); dpp_base->pos.cur0_ctl.bits.cur0_enable = cur_en;
drivers/gpu/drm/amd/display/dc/hubp/dcn401/dcn401_hubp.c +0 -38
@@ -654,12 +654,8 @@ void hubp401_cursor_set_position(struct dcn20_hubp *hubp2 =TO_DCN20_HUBP (hubp);int x_pos = pos->x - param->recout.x;int y_pos = pos->y - param->recout.y; -int x_hotspot = pos->x_hotspot; -int y_hotspot = pos->y_hotspot;int rec_x_offset = x_pos - pos->x_hotspot;int rec_y_offset = y_pos - pos->y_hotspot; -int cursor_height = (int )hubp->curs_attr.height; -int cursor_width = (int )hubp->curs_attr.width;uint32_t dst_x_offset;uint32_t cur_en = pos->enable ?1 :0 ;
@@ -672,28 +668,6 @@ void hubp401_cursor_set_position(if (hubp->curs_attr.address.quad_part ==0 )return ; -// Transform cursor width / height and hotspots for offset calculations -if (param->rotation ==ROTATION_ANGLE_90 || param->rotation ==ROTATION_ANGLE_270 ) { -swap (cursor_height, cursor_width); -swap (x_hotspot, y_hotspot); - -if (param->rotation ==ROTATION_ANGLE_90 ) { -// hotspot = (-y, x) - rec_x_offset = x_pos - (cursor_width - x_hotspot); - rec_y_offset = y_pos - y_hotspot; - }else if (param->rotation ==ROTATION_ANGLE_270 ) { -// hotspot = (y, -x) - rec_x_offset = x_pos - x_hotspot; - rec_y_offset = y_pos - (cursor_height - y_hotspot); - } - }else if (param->rotation ==ROTATION_ANGLE_180 ) { -// hotspot = (-x, -y) -if (!param->mirror) - rec_x_offset = x_pos - (cursor_width - x_hotspot); - - rec_y_offset = y_pos - (cursor_height - y_hotspot); - } - dst_x_offset = (rec_x_offset >=0 ) ? rec_x_offset :0 ; dst_x_offset *= param->ref_clk_khz; dst_x_offset /= param->pixel_clk_khz;
@@ -705,18 +679,6 @@ void hubp401_cursor_set_position(dc_fixpt_from_int (dst_x_offset), param->h_scale_ratio)); -if (rec_x_offset >= (int )param->recout.width) - cur_en =0 ;/* not visible beyond right edge*/ - -if (rec_x_offset + cursor_width <=0 ) - cur_en =0 ;/* not visible beyond left edge*/ - -if (rec_y_offset >= (int )param->recout.height) - cur_en =0 ;/* not visible beyond bottom edge*/ - -if (rec_y_offset + cursor_height <=0 ) - cur_en =0 ;/* not visible beyond top edge*/ -if (cur_en &®_READ (CURSOR_SURFACE_ADDRESS ) ==0 ) hubp->funcs->set_cursor_attributes (hubp, &hubp->curs_attr);
drivers/gpu/drm/amd/display/dc/hwss/dcn401/dcn401_hwseq.c +19 -116
182 lines not on this page · raw message
Signature · 1 line
2.34.1
PATCH 6/39 drm/amd/display: Send DP_TOTAL_LTTPR_CNT during detection if LTTPR is present
In reply to Alex HungFrom: Michael Strauss <[email protected]>
[WHY]
New register field added in DP2.1 SCR, needed for auxless ALPM
[HOW]
Echo value read from 0xF0007 back to sink
--- .../amd/display/dc/link/protocols/link_dp_capability.c | 10 +++++++++- drivers/gpu/drm/amd/display/include/dpcd_defs.h | 5 +++++ 2 files changed, 14 insertions(+), 1 deletion(-)
drivers/gpu/drm/amd/display/dc/link/protocols/link_dp_capability.c +9 -1
@@ -1605,9 +1605,17 @@ static bool retrieve_link_cap(struct dc_link *link)return false; } -if (dp_is_lttpr_present (link)) +if (dp_is_lttpr_present (link)) {configure_lttpr_mode_transparent (link); +// Echo TOTAL_LTTPR_CNT back downstream +core_link_write_dpcd ( + link, +DP_TOTAL_LTTPR_CNT , + &link->dpcd_caps.lttpr_caps.phy_repeater_cnt, +sizeof (link->dpcd_caps.lttpr_caps.phy_repeater_cnt)); + } +/* Read DP tunneling information. */ status =dpcd_get_tunneling_device_data (link);
drivers/gpu/drm/amd/display/include/dpcd_defs.h +5 -0
@@ -177,4 +177,9 @@ enum dpcd_psr_sink_states {#define DP_SINK_PR_PIXEL_DEVIATION_PER_LINE 0x379#define DP_SINK_PR_MAX_NUMBER_OF_DEVIATION_LINE 0x37A +/* Remove once drm_dp_helper.h is updated upstream */ +#ifndef DP_TOTAL_LTTPR_CNT +#define DP_TOTAL_LTTPR_CNT 0xF000A/* 2.1 */ +#endif +#endif /* __DAL_DPCD_DEFS_H__ */
Signature · 1 line
2.34.1
PATCH 7/39 drm/amd/display: Remove redundant checks for pipe_ctx->stream
In reply to Alex Hung[WHAT & HOW]
The null checks for pipe_ctx->stream and pipe_ctx->stream_res.tg are redundant as they were already dereferenced previously, as reported by Coverity; therefore the null checks are removed.
This fixes 6 REVERSE_INULL issues reported by Coverity.
--- drivers/gpu/drm/amd/display/dc/hwss/dcn20/dcn20_hwseq.c | 7 +++---- drivers/gpu/drm/amd/display/dc/hwss/dcn401/dcn401_hwseq.c | 4 ++-- .../gpu/drm/amd/display/dc/link/accessories/link_dp_cts.c | 2 +- 3 files changed, 6 insertions(+), 7 deletions(-)
drivers/gpu/drm/amd/display/dc/hwss/dcn20/dcn20_hwseq.c +3 -4
@@ -974,8 +974,8 @@ enum dc_status dcn20_enable_stream_timing(/* TODO enable stream if timing changed */ /* TODO unblank stream if DP */ -if (pipe_ctx->stream &&dc_state_get_pipe_subvp_type (context, pipe_ctx) ==SUBVP_PHANTOM ) { -if (pipe_ctx->stream_res.tg && pipe_ctx->stream_res.tg->funcs->phantom_crtc_post_enable) +if (dc_state_get_pipe_subvp_type (context, pipe_ctx) ==SUBVP_PHANTOM ) { +if (pipe_ctx->stream_res.tg->funcs->phantom_crtc_post_enable) pipe_ctx->stream_res.tg->funcs->phantom_crtc_post_enable (pipe_ctx->stream_res.tg); }
@@ -1827,8 +1827,7 @@ static void dcn20_update_dchubp_dpp(if (pipe_ctx->update_flags.bits.enable) hubp->funcs->set_blank (hubp, false);/* If the stream paired with this plane is phantom, the plane is also phantom */ -if (pipe_ctx->stream && pipe_mall_type ==SUBVP_PHANTOM - && hubp->funcs->phantom_hubp_post_enable) +if (pipe_mall_type ==SUBVP_PHANTOM && hubp->funcs->phantom_hubp_post_enable) hubp->funcs->phantom_hubp_post_enable (hubp); }
drivers/gpu/drm/amd/display/dc/hwss/dcn401/dcn401_hwseq.c +2 -2
@@ -916,8 +916,8 @@ enum dc_status dcn401_enable_stream_timing(/* TODO enable stream if timing changed */ /* TODO unblank stream if DP */ -if (pipe_ctx->stream &&dc_state_get_pipe_subvp_type (context, pipe_ctx) ==SUBVP_PHANTOM ) { -if (pipe_ctx->stream_res.tg && pipe_ctx->stream_res.tg->funcs->phantom_crtc_post_enable) +if (dc_state_get_pipe_subvp_type (context, pipe_ctx) ==SUBVP_PHANTOM ) { +if (pipe_ctx->stream_res.tg->funcs->phantom_crtc_post_enable) pipe_ctx->stream_res.tg->funcs->phantom_crtc_post_enable (pipe_ctx->stream_res.tg); }
drivers/gpu/drm/amd/display/dc/link/accessories/link_dp_cts.c +1 -1
@@ -853,7 +853,7 @@ bool dp_set_test_pattern( CRTC_STATE_VACTIVE);if (pipe_ctx->stream_res.tg->funcs->lock_doublebuffer_disable) { -if (pipe_ctx->stream &&should_use_dmub_lock (pipe_ctx->stream->link)) { +if (should_use_dmub_lock (pipe_ctx->stream->link)) {union dmub_hw_lock_flags hw_locks = {0 };struct dmub_hw_lock_inst_flags inst_flags = {0 };
Signature · 1 line
2.34.1
PATCH 8/39 drm/amd/display: Run DC_LOG_DC after checking link->link_enc
In reply to Alex Hung[WHAT]
The DC_LOG_DC should be run after link->link_enc is checked, not before.
This fixes 1 REVERSE_INULL issue reported by Coverity.
--- drivers/gpu/drm/amd/display/dc/link/link_factory.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-)
drivers/gpu/drm/amd/display/dc/link/link_factory.c +3 -3
@@ -610,14 +610,14 @@ static bool construct_phy(struct dc_link *link, link->link_enc = link->dc->res_pool->funcs->link_enc_create (dc_ctx, &enc_init_data); -DC_LOG_DC ("BIOS object table - DP_IS_USB_C: %d" , link->link_enc->features.flags.bits.DP_IS_USB_C); -DC_LOG_DC ("BIOS object table - IS_DP2_CAPABLE: %d" , link->link_enc->features.flags.bits.IS_DP2_CAPABLE); -if (!link->link_enc) {DC_ERROR ("Failed to create link encoder!\n" ); goto link_enc_create_fail; } +DC_LOG_DC ("BIOS object table - DP_IS_USB_C: %d" , link->link_enc->features.flags.bits.DP_IS_USB_C); +DC_LOG_DC ("BIOS object table - IS_DP2_CAPABLE: %d" , link->link_enc->features.flags.bits.IS_DP2_CAPABLE); +/* Update link encoder tracking variables. These are used for the dynamic * assignment of link encoders to streams. */
Signature · 1 line
2.34.1
PATCH 9/39 drm/amd/display: Fix cursor size issues
In reply to Alex HungFrom: Nevenko Stupar <[email protected]>
[WHY & HOW]
Fix the cursor size between ODM slices.
--- .../drm/amd/display/dc/hwss/dcn401/dcn401_hwseq.c | 14 ++++++++++++++ 1 file changed, 14 insertions(+)
drivers/gpu/drm/amd/display/dc/hwss/dcn401/dcn401_hwseq.c +14 -0
@@ -1169,6 +1169,20 @@ void dcn401_set_cursor_position(struct pipe_ctx *pipe_ctx) x_pos -= (prev_odm_width + prev_odm_offset); } +/* If the position is negative then we need to add to the hotspot +* to fix cursor size between ODM slices +*/ + +if (x_pos <0 ) { + pos_cpy.x_hotspot -= x_pos; + x_pos =0 ; + } + +if (y_pos <0 ) { + pos_cpy.y_hotspot -= y_pos; + y_pos =0 ; + } + pos_cpy.x = (uint32_t )x_pos; pos_cpy.y = (uint32_t )y_pos;
Signature · 1 line
2.34.1
PATCH 10/39 drm/amd/display: Fix uninitialized variables in dcn401
In reply to Alex Hung[WHAT & HOW]
surf_linear_128_l/c are used in CalculateBytePerPixelAndBlockSizes before they are assigned, so initializing them before passing them into the function.
This fixes 2 UNINIT issues reported by Coverity.
--- .../dc/dml2/dml21/src/dml2_core/dml2_core_dcn4_calcs.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
drivers/gpu/drm/amd/display/dc/dml2/dml21/src/dml2_core/dml2_core_dcn4_calcs.c +2 -2
@@ -11521,8 +11521,8 @@ void dml2_core_calcs_get_dpte_row_height(unsigned int MacroTileWidthC;unsigned int MacroTileHeightY;unsigned int MacroTileHeightC; -bool surf_linear_128_l; -bool surf_linear_128_c; +bool surf_linear_128_l = false; +bool surf_linear_128_c = false; CalculateBytePerPixelAndBlockSizes( SourcePixelFormat,
Signature · 1 line
2.34.1
PATCH 11/39 drm/amd/display: Remove useless function call
In reply to Alex Hung[WHAT & HOW]clk_mgr_helper_get_active_display_cnt returns display count and itself alone has no use.
This fixes 1 CHECKED_RETURN issue reported by Coverity.
--- drivers/gpu/drm/amd/display/dc/clk_mgr/dcn201/dcn201_clk_mgr.c | 2 -- 1 file changed, 2 deletions(-)
drivers/gpu/drm/amd/display/dc/clk_mgr/dcn201/dcn201_clk_mgr.c +0 -2
@@ -113,8 +113,6 @@ static void dcn201_update_clocks(struct clk_mgr *clk_mgr_base,dcn2_read_clocks_from_hw_dentist (clk_mgr_base); } -clk_mgr_helper_get_active_display_cnt (dc, context); -if (should_set_clock (safe_to_lower, new_clocks->phyclk_khz, clk_mgr_base->clks.phyclk_khz)) clk_mgr_base->clks.phyclk_khz = new_clocks->phyclk_khz;
Signature · 1 line
2.34.1
PATCH 12/39 drm/amd/display: Check and log for function error codes
In reply to Alex Hung[WHAT & HOW]BIOS_CMD_TABLE_REVISION and link_transmitter_control can return error codes and errors should be reported.
This fixes 3 CHECKED_RETURN issues reported by Coverity.
--- drivers/gpu/drm/amd/display/dc/bios/command_table2.c | 3 ++- drivers/gpu/drm/amd/display/dc/dce/dce_link_encoder.c | 5 ++++- drivers/gpu/drm/amd/display/dc/dcn10/dcn10_link_encoder.c | 8 +++++++- 3 files changed, 13 insertions(+), 3 deletions(-)
drivers/gpu/drm/amd/display/dc/bios/command_table2.c +2 -1
@@ -227,7 +227,8 @@ static void init_transmitter_control(struct bios_parser *bp)uint8_t frev;uint8_t crev =0 ; -BIOS_CMD_TABLE_REVISION (dig1transmittercontrol, frev, crev); +if (!BIOS_CMD_TABLE_REVISION (dig1transmittercontrol, frev, crev)) +BREAK_TO_DEBUGGER ();switch (crev) {case 6 :
drivers/gpu/drm/amd/display/dc/dce/dce_link_encoder.c +4 -1
@@ -1361,7 +1361,10 @@ void dce110_link_encoder_dp_set_lane_settings( cntl.lane_settings = training_lane_set.raw;/* call VBIOS table to set voltage swing and pre-emphasis */ -link_transmitter_control (enc110, &cntl); +if (link_transmitter_control (enc110, &cntl) !=BP_RESULT_OK ) { +DC_LOG_ERROR ("%s: Failed to execute VBIOS command table!\n" , __func__); +BREAK_TO_DEBUGGER (); + } } }
drivers/gpu/drm/amd/display/dc/dcn10/dcn10_link_encoder.c +7 -1
@@ -1104,6 +1104,7 @@ void dcn10_link_encoder_dp_set_lane_settings(union dpcd_training_lane_set training_lane_set = { {0 } };int32_t lane =0 ;struct bp_transmitter_control cntl = {0 }; +enum bp_result result;if (!link_settings) {BREAK_TO_DEBUGGER ();
@@ -1138,7 +1139,12 @@ void dcn10_link_encoder_dp_set_lane_settings( cntl.lane_settings = training_lane_set.raw;/* call VBIOS table to set voltage swing and pre-emphasis */ -link_transmitter_control (enc10, &cntl); + result =link_transmitter_control (enc10, &cntl); + +if (result !=BP_RESULT_OK ) { +DC_LOG_ERROR ("%s: Failed to execute VBIOS command table!\n" , __func__); +BREAK_TO_DEBUGGER (); + } } }
Signature · 1 line
2.34.1
PATCH 13/39 drm/amd/display: Check and log for function error codes
In reply to Alex Hung[WHAT & HOW]dm_dmub_hw_init and drm_dp_mst_topology_mgr_set_mst can return error codes and errors should be reported.
This fixes 2 CHECKED_RETURN issues reported by Coverity.
--- drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c | 5 ++++- drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_debugfs.c | 5 ++++- 2 files changed, 8 insertions(+), 2 deletions(-)
drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c +4 -1
@@ -1302,6 +1302,7 @@ static void dm_dmub_hw_resume(struct amdgpu_device *adev)struct dmub_srv *dmub_srv = adev->dm.dmub_srv;enum dmub_status status;bool init; +int r;if (!dmub_srv) {/* DMUB isn't supported on the ASIC. */
@@ -1319,7 +1320,9 @@ static void dm_dmub_hw_resume(struct amdgpu_device *adev)DRM_WARN ("Wait for DMUB auto-load failed: %d\n" , status); }else {/* Perform the full hardware initialization. */ -dm_dmub_hw_init (adev); + r =dm_dmub_hw_init (adev); +if (r) +DRM_ERROR ("DMUB interface failed to initialize: status=%d\n" , r); } }
drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_debugfs.c +4 -1
@@ -3795,6 +3795,7 @@ static int trigger_hpd_mst_set(void *data, u64 val)struct amdgpu_dm_connector *aconnector;struct drm_connector *connector;struct dc_link *link =NULL ; +int ret;if (val ==1 ) {drm_connector_list_iter_begin (dev, &iter);
@@ -3806,7 +3807,9 @@ static int trigger_hpd_mst_set(void *data, u64 val)dc_link_detect (aconnector->dc_link,DETECT_REASON_HPD );mutex_unlock (&adev->dm.dc_lock); -drm_dp_mst_topology_mgr_set_mst (&aconnector->mst_mgr, true); + ret =drm_dp_mst_topology_mgr_set_mst (&aconnector->mst_mgr, true); +if (ret <0 ) +DRM_ERROR ("DM_MST: Failed to set the device into MST mode!" ); } } }else if (val ==0 ) {
Signature · 1 line
2.34.1
PATCH 14/39 drm/amd/display: Check HDCP returned status
In reply to Alex Hung[WHAT & HOW]
Check mod_hdcp_execute_and_set() return values in authenticated_dp.
This fixes 3 CHECKED_RETURN issues reported by Coverity.
--- .../amd/display/modules/hdcp/hdcp1_execution.c | 15 +++++++++------ 1 file changed, 9 insertions(+), 6 deletions(-)
drivers/gpu/drm/amd/display/modules/hdcp/hdcp1_execution.c +9 -6
@@ -433,17 +433,20 @@ static enum mod_hdcp_status authenticated_dp(struct mod_hdcp *hdcp, }if (status ==MOD_HDCP_STATUS_SUCCESS ) -mod_hdcp_execute_and_set (mod_hdcp_read_bstatus, +if (!mod_hdcp_execute_and_set (mod_hdcp_read_bstatus, &input->bstatus_read, &status, - hdcp,"bstatus_read" ); + hdcp,"bstatus_read" )) + goto out;if (status ==MOD_HDCP_STATUS_SUCCESS ) -mod_hdcp_execute_and_set (check_link_integrity_dp, +if (!mod_hdcp_execute_and_set (check_link_integrity_dp, &input->link_integrity_check, &status, - hdcp,"link_integrity_check" ); + hdcp,"link_integrity_check" )) + goto out;if (status ==MOD_HDCP_STATUS_SUCCESS ) -mod_hdcp_execute_and_set (check_no_reauthentication_request_dp, +if (!mod_hdcp_execute_and_set (check_no_reauthentication_request_dp, &input->reauth_request_check, &status, - hdcp,"reauth_request_check" ); + hdcp,"reauth_request_check" )) + goto out; out:return status; }
Signature · 1 line
2.34.1
PATCH 15/39 drm/amd/display: Add Replay general cmd
In reply to Alex HungFrom: Joan Lee <[email protected]>
[WHY & HOW]
Driver side adding replay general cmd interface.
Replay general command will config at most two uint_32 parameters, with a replay general command subtype to set relative configurations.
--- drivers/gpu/drm/amd/display/dc/dc_types.h | 1 + .../gpu/drm/amd/display/dc/dce/dmub_replay.c | 18 +++++++++++++++++- 2 files changed, 18 insertions(+), 1 deletion(-)
drivers/gpu/drm/amd/display/dc/dc_types.h +1 -0
@@ -1036,6 +1036,7 @@ enum replay_FW_Message_type { Replay_Set_Residency_Frameupdate_Timer, Replay_Set_Pseudo_VTotal, Replay_Disabled_Adaptive_Sync_SDP, + Replay_Set_General_Cmd, }; union replay_error_status {
drivers/gpu/drm/amd/display/dc/dce/dmub_replay.c +17 -1
@@ -346,13 +346,29 @@ static void dmub_replay_send_cmd(struct dmub_replay *dmub, cmd.replay_disabled_adaptive_sync_sdp.header.sub_type =DMUB_CMD__REPLAY_DISABLED_ADAPTIVE_SYNC_SDP ; cmd.replay_disabled_adaptive_sync_sdp.header.payload_bytes = -sizeof (struct dmub_rb_cmd_replay_set_pseudo_vtotal ); +sizeof (struct dmub_rb_cmd_replay_disabled_adaptive_sync_sdp );//Cmd Body cmd.replay_disabled_adaptive_sync_sdp.data.panel_inst = cmd_element->disabled_adaptive_sync_sdp_data.panel_inst; cmd.replay_disabled_adaptive_sync_sdp.data.force_disabled = cmd_element->disabled_adaptive_sync_sdp_data.force_disabled;break ; +case Replay_Set_General_Cmd: +//Header + cmd.replay_set_general_cmd.header.sub_type = +DMUB_CMD__REPLAY_SET_GENERAL_CMD ; + cmd.replay_set_general_cmd.header.payload_bytes = +sizeof (struct dmub_rb_cmd_replay_set_general_cmd ); +//Cmd Body + cmd.replay_set_general_cmd.data.panel_inst = + cmd_element->set_general_cmd_data.panel_inst; + cmd.replay_set_general_cmd.data.subtype = + cmd_element->set_general_cmd_data.subtype; + cmd.replay_set_general_cmd.data.param1 = + cmd_element->set_general_cmd_data.param1; + cmd.replay_set_general_cmd.data.param2 = + cmd_element->set_general_cmd_data.param2; +break ;case Replay_Msg_Not_Support:default :return ;
Signature · 1 line
2.34.1
PATCH 16/39 drm/amd/display: Use sw cursor for DCN401 with rotation
In reply to Alex HungFrom: Aurabindo Pillai <[email protected]>
[WHAT & HOW]
On DCN401, the cursor composition to the plane happens after scaler. So the cursor isn't stretched with the rest of the surface. Temporarily disable hardware cursor in case when hardware rotation is enabled such that userspace falls back to software cursor.
--- .../gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c | 34 ++++++++++++++++--- 1 file changed, 29 insertions(+), 5 deletions(-)
drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c +29 -5
@@ -11093,8 +11093,12 @@ static int dm_crtc_get_cursor_mode(struct amdgpu_device *adev,int cursor_scale_w, cursor_scale_h;int i; -/* Overlay cursor not supported on HW before DCN */ -if (amdgpu_ip_version (adev,DCE_HWIP ,0 ) ==0 ) { +/* Overlay cursor not supported on HW before DCN +* DCN401 does not have the cursor-on-scaled-plane or cursor-on-yuv-plane restrictions +* as previous DCN generations, so enable native mode on DCN401 in addition to DCE +*/ +if (amdgpu_ip_version (adev,DCE_HWIP ,0 ) ==0 || +amdgpu_ip_version (adev,DCE_HWIP ,0 ) ==IP_VERSION (4 ,0 ,1 )) { *cursor_mode =DM_CURSOR_NATIVE_MODE ;return 0 ; }
@@ -11237,7 +11241,7 @@ static int amdgpu_dm_atomic_check(struct drm_device *dev,struct drm_crtc *crtc;struct drm_crtc_state *old_crtc_state, *new_crtc_state;struct drm_plane *plane; -struct drm_plane_state *old_plane_state, *new_plane_state; +struct drm_plane_state *old_plane_state, *new_plane_state, *new_cursor_state;enum dc_status status;int ret, i;bool lock_and_validation_needed = false;
@@ -11465,19 +11469,39 @@ static int amdgpu_dm_atomic_check(struct drm_device *dev,drm_dbg_atomic (dev,"MPO enablement requested on crtc:[%p]\n" , crtc); } -/* Check cursor planes restrictions */ +/* Check cursor restrictions */ for_each_new_crtc_in_state (state, crtc, new_crtc_state, i) {enum amdgpu_dm_cursor_mode required_cursor_mode; +int is_rotated, is_scaled;/* Overlay cusor not subject to native cursor restrictions */ dm_new_crtc_state =to_dm_crtc_state (new_crtc_state);if (dm_new_crtc_state->cursor_mode ==DM_CURSOR_OVERLAY_MODE )continue ; +/* Check if rotation or scaling is enabled on DCN401 */ +if ((drm_plane_mask (crtc->cursor) & new_crtc_state->plane_mask) && +amdgpu_ip_version (adev,DCE_HWIP ,0 ) ==IP_VERSION (4 ,0 ,1 )) { + new_cursor_state =drm_atomic_get_new_plane_state (state, crtc->cursor); + + is_rotated = new_cursor_state && + ((new_cursor_state->rotation &DRM_MODE_ROTATE_MASK ) !=DRM_MODE_ROTATE_0 ); + is_scaled = new_cursor_state && ((new_cursor_state->src_w >>16 != new_cursor_state->crtc_w) || + (new_cursor_state->src_h >>16 != new_cursor_state->crtc_h)); + +if (is_rotated || is_scaled) { +drm_dbg_driver ( + crtc->dev, +"[CRTC:%d:%s] cannot enable hardware cursor due to rotation/scaling\n" , + crtc->base.id, crtc->name); + ret = -EINVAL ; + goto fail; + } + } +/* If HW can only do native cursor, check restrictions again */ ret =dm_crtc_get_cursor_mode (adev, state, dm_new_crtc_state, &required_cursor_mode); -if (ret) { drm_dbg_driver(crtc->dev, "[CRTC:%d:%s] Checking cursor mode failed\n",
Signature · 1 line
2.34.1
PATCH 17/39 drm/amd/display: Always enable HPO for DCN4 dGPU
In reply to Alex HungFrom: "Leo (Hanghong) Ma" <[email protected]>
[WHY && HOW]
Some DP EDID CTS tests fail due to HPO disable, and we should keep it enable on DCN4 dGPU.
--- drivers/gpu/drm/amd/display/dc/hwss/dcn401/dcn401_hwseq.c | 2 ++ drivers/gpu/drm/amd/display/dc/hwss/dcn401/dcn401_init.c | 1 - 2 files changed, 2 insertions(+), 1 deletion(-)
drivers/gpu/drm/amd/display/dc/hwss/dcn401/dcn401_hwseq.c +2 -0
@@ -408,6 +408,8 @@ void dcn401_init_hw(struct dc *dc)REG_UPDATE (DCFCLK_CNTL ,DCFCLK_GATE_DIS ,0 ); } +dcn401_setup_hpo_hw_control (hws, true); +if (!dcb->funcs->is_accelerated_mode (dcb) && dc->res_pool->hubbub->funcs->init_watermarks) dc->res_pool->hubbub->funcs->init_watermarks (dc->res_pool->hubbub);
drivers/gpu/drm/amd/display/dc/hwss/dcn401/dcn401_init.c +0 -1
@@ -137,7 +137,6 @@ static const struct hwseq_private_funcs dcn401_private_funcs = { .program_mall_pipe_config = dcn32_program_mall_pipe_config, .update_force_pstate = dcn32_update_force_pstate, .update_mall_sel = dcn32_update_mall_sel, - .setup_hpo_hw_control = dcn401_setup_hpo_hw_control, .calculate_dccg_k1_k2_values = NULL, .apply_single_controller_ctx_to_hw = dce110_apply_single_controller_ctx_to_hw, .reset_back_end_for_pipe = dcn20_reset_back_end_for_pipe,
Signature · 1 line
2.34.1
PATCH 18/39 drm/amd/display: resync OTG after DIO FIFO resync
In reply to Alex HungFrom: TungYu Lu <[email protected]>
[WHY]
Tiled displays showed not aligned on 8K60hz when system resumed from S3/S4.
[HOW]
Do dc_trigger_sync to re-sync pipes to ensure OTG become synced.
--- drivers/gpu/drm/amd/display/dc/hwss/dcn32/dcn32_hwseq.c | 2 ++ 1 file changed, 2 insertions(+)
drivers/gpu/drm/amd/display/dc/hwss/dcn32/dcn32_hwseq.c +2 -0
@@ -1254,6 +1254,8 @@ void dcn32_resync_fifo_dccg_dio(struct dce_hwseq *hws, struct dc *dc, struct dc_ pipe->stream_res.tg->funcs->enable_crtc (pipe->stream_res.tg); } } + +dc_trigger_sync (dc, dc->current_state); } void dcn32_unblank_stream(struct pipe_ctx *pipe_ctx,
Signature · 1 line
2.34.1
PATCH 19/39 drm/amd/display: Call dpmm when checking mode support
In reply to Alex HungFrom: George Shen <[email protected]>
[WHY]
In check_mode_supported, we should validate that the required clocks can be successfully mapped to DPM levels.
This ensures we only apply dynamic ODM optimizations to modes that are supported without dynamic ODM optimizations to begin with.
[HOW]
Call dpmm to check that the display config can successfully be mapped to a DPM level.
--- .../amd/display/dc/dml2/dml21/dml21_wrapper.c | 1 + .../dc/dml2/dml21/src/dml2_top/dml_top.c | 17 +++++++++++++++++ .../dml21/src/inc/dml2_internal_shared_types.h | 1 + 3 files changed, 19 insertions(+)
drivers/gpu/drm/amd/display/dc/dml2/dml21/dml21_wrapper.c +1 -0
@@ -257,6 +257,7 @@ static bool dml21_check_mode_support(const struct dc *in_dc, struct dc_state *co mode_support->dml2_instance = dml_init->dml2_instance;dml21_map_dc_state_into_dml_display_cfg (in_dc, context, dml_ctx); + dml_ctx->v21.mode_programming.dml2_instance->scratch.build_mode_programming_locals.mode_programming_params.programming = dml_ctx->v21.mode_programming.programming; is_supported =dml2_check_mode_supported (mode_support);if (!is_supported)return false;
drivers/gpu/drm/amd/display/dc/dml2/dml21/src/dml2_top/dml_top.c +17 -0
@@ -96,10 +96,15 @@ bool dml2_check_mode_supported(struct dml2_check_mode_supported_in_out *in_out) {struct dml2_instance *dml = (struct dml2_instance *)in_out->dml2_instance;struct dml2_check_mode_supported_locals *l = &dml->scratch.check_mode_supported_locals; +/* Borrow the build_mode_programming_locals programming struct for DPMM call. */ +struct dml2_display_cfg_programming *dpmm_programming = dml->scratch.build_mode_programming_locals.mode_programming_params.programming;bool result = false;bool mcache_success = false; +if (dpmm_programming) +memset (dpmm_programming,0 ,sizeof (struct dml2_display_cfg_programming )); +setup_unoptimized_display_config_with_meta (dml, &l->base_display_config_with_meta, in_out->display_config); l->mode_support_params.instance = &dml->core_instance;
@@ -122,6 +127,18 @@ bool dml2_check_mode_supported(struct dml2_check_mode_supported_in_out *in_out) mcache_success =dml2_top_optimization_perform_optimization_phase (&l->optimization_phase_locals, &mcache_phase); } +/* +* Call DPMM to map all requirements to minimum clock state +*/ +if (result && dpmm_programming) { + l->dppm_map_mode_params.min_clk_table = &dml->min_clk_table; + l->dppm_map_mode_params.display_cfg = &l->base_display_config_with_meta; + l->dppm_map_mode_params.programming = dpmm_programming; + l->dppm_map_mode_params.soc_bb = &dml->soc_bbox; + l->dppm_map_mode_params.ip = &dml->core_instance.clean_me_up.mode_lib.ip; + result = dml->dpmm_instance.map_mode_to_soc_dpm (&l->dppm_map_mode_params); + } + in_out->is_supported = mcache_success; result = result && in_out->is_supported;
drivers/gpu/drm/amd/display/dc/dml2/dml21/src/inc/dml2_internal_shared_types.h +1 -0
@@ -870,6 +870,7 @@ struct dml2_check_mode_supported_locals {struct dml2_optimization_phase_locals optimization_phase_locals;struct display_configuation_with_meta base_display_config_with_meta;struct display_configuation_with_meta optimized_display_config_with_meta; +struct dml2_dpmm_map_mode_to_soc_dpm_params_in_out dppm_map_mode_params; };struct optimization_init_function_params {
Signature · 1 line
2.34.1
PATCH 20/39 drm/amd/display: Add workaround to restrict max frac urgent for DPM0
In reply to Alex HungFrom: Sung-huai Wang <[email protected]>
[WHY]
Underflow occurs on some platforms when urgent BW is close to the maximum in DPM0.
[HOW]
It does not occur at DPM1, so as a workaround restrict the maximum amount and increase the lowest state index for clock states until we're out of DPM0.
Adds DML2 config options to specify this pe platform as required.
--- .../gpu/drm/amd/display/dc/dml2/dml2_wrapper.c | 15 +++++++++++++++ .../gpu/drm/amd/display/dc/dml2/dml2_wrapper.h | 2 ++ .../display/dc/resource/dcn35/dcn35_resource.c | 3 ++- 3 files changed, 19 insertions(+), 1 deletion(-)
drivers/gpu/drm/amd/display/dc/dml2/dml2_wrapper.c +15 -0
@@ -628,6 +628,21 @@ static bool dml2_validate_and_build_resource(const struct dc *in_dc, struct dc_sif (result) {unsigned int lowest_state_idx = s->mode_support_params.out_lowest_state_idx; +double min_fclk_mhz_for_urgent_workaround = (double )dml2->config.min_fclk_for_urgent_workaround_khz /1000.0 ; +double max_frac_urgent = (double )dml2->config.max_frac_urgent_for_min_fclk_x1000 /1000.0 ; + +if (min_fclk_mhz_for_urgent_workaround >0.0 && max_frac_urgent >0.0 && + (dml2->v20.dml_core_ctx.mp.FractionOfUrgentBandwidth > max_frac_urgent || + dml2->v20.dml_core_ctx.mp.FractionOfUrgentBandwidthImmediateFlip > max_frac_urgent)) { +unsigned int forced_lowest_state_idx = lowest_state_idx; + +while (forced_lowest_state_idx < dml2->v20.dml_core_ctx.states.num_states && + dml2->v20.dml_core_ctx.states.state_array[forced_lowest_state_idx].fabricclk_mhz <= min_fclk_mhz_for_urgent_workaround) { + forced_lowest_state_idx +=1 ; + } + lowest_state_idx = forced_lowest_state_idx; + } + out_clks.dispclk_khz = (unsigned int )dml2->v20.dml_core_ctx.mp.Dispclk_calculated *1000 ; out_clks.p_state_supported = s->mode_support_info.DRAMClockChangeSupport[0 ] != dml_dram_clock_change_unsupported; if (in_dc->config.use_default_clock_table &&
drivers/gpu/drm/amd/display/dc/dml2/dml2_wrapper.h +2 -0
@@ -237,6 +237,8 @@ struct dml2_configuration_options {bool use_clock_dc_limits;bool gpuvm_enable;struct dml2_soc_bb *bb_from_dmub; +int max_frac_urgent_for_min_fclk_x1000; +int min_fclk_for_urgent_workaround_khz; };/*
drivers/gpu/drm/amd/display/dc/resource/dcn35/dcn35_resource.c +2 -1
@@ -2152,8 +2152,9 @@ static bool dcn35_resource_construct( dc->dml2_options.callbacks.can_support_mclk_switch_using_fw_based_vblank_stretch = &dcn30_can_support_mclk_switch_using_fw_based_vblank_stretch; dc->dml2_options.max_segments_per_hubp =24 ; - dc->dml2_options.det_segment_size =DCN3_2_DET_SEG_SIZE ;/*todo*/ + dc->dml2_options.max_frac_urgent_for_min_fclk_x1000 =900 ; + dc->dml2_options.min_fclk_for_urgent_workaround_khz =400 *1000 ;if (dc->config.sdpif_request_limit_words_per_umc ==0 ) dc->config.sdpif_request_limit_words_per_umc =16 ;/*todo*/
Signature · 1 line
2.34.1
PATCH 21/39 drm/amd/display: Make DML2.1 P-State method force per stream
In reply to Alex HungFrom: Dillon Varone <[email protected]>
[WHY & HOW]
Currently the force only works for a single display, make it so it can be forced per stream.
--- drivers/gpu/drm/amd/display/dc/dc.h | 2 +- .../drm/amd/display/dc/dml2/dml21/dml21_translation_helper.c | 2 +- drivers/gpu/drm/amd/display/dc/dml2/dml21/dml21_wrapper.c | 3 ++- drivers/gpu/drm/amd/display/dc/dml2/dml2_wrapper.h | 2 +- 4 files changed, 5 insertions(+), 4 deletions(-)
drivers/gpu/drm/amd/display/dc/dc.h +1 -1
@@ -1038,7 +1038,7 @@ struct dc_debug_options {bool force_chroma_subsampling_1tap;bool disable_422_left_edge_pixel;bool dml21_force_pstate_method; -uint32_t dml21_force_pstate_method_value; +uint32_t dml21_force_pstate_method_values[MAX_PIPES ];uint32_t dml21_disable_pstate_method_mask;union dmub_fams2_global_feature_config fams2_config;bool enable_legacy_clock_update;
drivers/gpu/drm/amd/display/dc/dml2/dml21/dml21_translation_helper.c +1 -1
@@ -1000,7 +1000,7 @@ bool dml21_map_dc_state_into_dml_display_cfg(const struct dc *in_dc, struct dc_s/* apply forced pstate policy */ if (dml_ctx->config.pmo.force_pstate_method_enable) { dml_dispcfg->plane_descriptors[disp_cfg_plane_location].overrides.uclk_pstate_change_strategy = -dml21_force_pstate_method_to_uclk_state_change_strategy (dml_ctx->config.pmo.force_pstate_method_value); +dml21_force_pstate_method_to_uclk_state_change_strategy (dml_ctx->config.pmo.force_pstate_method_values[stream_index]); } } }
drivers/gpu/drm/amd/display/dc/dml2/dml21/dml21_wrapper.c +2 -1
@@ -47,7 +47,8 @@ static void dml21_apply_debug_options(const struct dc *in_dc, struct dml2_contex/* UCLK P-State options */ if (in_dc->debug.dml21_force_pstate_method) { dml_ctx->config.pmo.force_pstate_method_enable = true; - dml_ctx->config.pmo.force_pstate_method_value = in_dc->debug.dml21_force_pstate_method_value; +for (int i =0 ; i <MAX_PIPES ; i++) + dml_ctx->config.pmo.force_pstate_method_values[i] = in_dc->debug.dml21_force_pstate_method_values[i]; }else { dml_ctx->config.pmo.force_pstate_method_enable = false; }
drivers/gpu/drm/amd/display/dc/dml2/dml2_wrapper.h +1 -1
@@ -230,7 +230,7 @@ struct dml2_configuration_options {struct socbb_ip_params_external *external_socbb_ip_params;struct {bool force_pstate_method_enable; -enum dml2_force_pstate_methods force_pstate_method_value; +enum dml2_force_pstate_methods force_pstate_method_values[MAX_PIPES ]; } pmo;bool map_dc_pipes_with_callbacks;
Signature · 1 line
2.34.1
Greg KH
maintainerRe: [PATCH 21/39] drm/amd/display: Make DML2.1 P-State method force per stream
Quoted 6 lines · Alex Hung
From: Dillon Varone <[email protected]>
[WHY & HOW]
Currently the force only works for a single display, make it so it can be forced per stream.
Quoted 6 lines
Reviewed-by Alvin Lee <[email protected]>Cc Mario Limonciello <[email protected]>Cc Alex Deucher <[email protected]>Acked-by Alex Hung <[email protected]>Signed-off-by Dillon Varone <[email protected]>
When submitting patches from others, you too have to sign-off on the patch. Read the DCO in the documentation for details.
thanks,
greg k-h
PATCH 22/39 drm/amd/display: Fix reduced resolution and refresh rate
In reply to Alex HungFrom: Daniel Sa <[email protected]>
[WHY]
Some monitors are forced to a lower resolution and refresh rate after system restarts.
[HOW]
Some monitors may give invalid LTTPR information when queried such as indicating they have one DP lane instead of 4. If given an invalid DPCD version, skip over getting lttpr link rate and lane counts.
--- .../dc/link/protocols/link_dp_capability.c | 21 ++++++++++--------- 1 file changed, 11 insertions(+), 10 deletions(-)
drivers/gpu/drm/amd/display/dc/link/protocols/link_dp_capability.c +11 -10
@@ -409,9 +409,6 @@ static enum dc_link_rate get_lttpr_max_link_rate(struct dc_link *link)case LINK_RATE_HIGH3 : lttpr_max_link_rate = link->dpcd_caps.lttpr_caps.max_link_rate;break ; -default : -// Assume all LTTPRs support up to HBR3 to improve misbehaving sink interop - lttpr_max_link_rate =LINK_RATE_HIGH3 ; }if (link->dpcd_caps.lttpr_caps.supported_128b_132b_rates.bits.UHBR20)
@@ -2137,15 +2134,19 @@ struct dc_link_settings dp_get_max_link_cap(struct dc_link *link)* notes: repeaters do not snoop in the DPRX Capabilities addresses (3.6.3). */ if (dp_is_lttpr_present (link)) { -if (link->dpcd_caps.lttpr_caps.max_lane_count < max_link_cap.lane_count) - max_link_cap.lane_count = link->dpcd_caps.lttpr_caps.max_lane_count; - lttpr_max_link_rate =get_lttpr_max_link_rate (link); -if (lttpr_max_link_rate < max_link_cap.link_rate) - max_link_cap.link_rate = lttpr_max_link_rate; +/* Some LTTPR devices do not report valid DPCD revisions, if so, do not take it's link cap into consideration. */ +if (link->dpcd_caps.lttpr_caps.revision.raw >=DPCD_REV_14 ) { +if (link->dpcd_caps.lttpr_caps.max_lane_count < max_link_cap.lane_count) + max_link_cap.lane_count = link->dpcd_caps.lttpr_caps.max_lane_count; + lttpr_max_link_rate =get_lttpr_max_link_rate (link); -if (!link->dpcd_caps.lttpr_caps.supported_128b_132b_rates.bits.UHBR13_5) - is_uhbr13_5_supported = false; +if (lttpr_max_link_rate < max_link_cap.link_rate) + max_link_cap.link_rate = lttpr_max_link_rate; + +if (!link->dpcd_caps.lttpr_caps.supported_128b_132b_rates.bits.UHBR13_5) + is_uhbr13_5_supported = false; + } DC_LOG_HW_LINK_TRAINING("%s\n Training with LTTPR, max_lane count %d max_link rate %d \n", __func__,
Signature · 1 line
2.34.1
PATCH 23/39 drm/amd/display: Add null checks before accessing struct elements
In reply to Alex Hung[WHAT]
1. is_pwrseq0 needs to check link before accessing link->link_index.
2. context is checked before accessing its bw_ctx.dml2
3. clk_mgr_base->bw_params is checked before clk_table.num_entries_per_cl
This fixes 4 REVERSE_INULL issues reported by Coverity.
--- .../drm/amd/display/dc/clk_mgr/dcn32/dcn32_clk_mgr.c | 10 ++++++---- .../drm/amd/display/dc/clk_mgr/dcn401/dcn401_clk_mgr.c | 10 ++++++---- drivers/gpu/drm/amd/display/dc/dml/dcn20/dcn20_fpu.c | 2 +- drivers/gpu/drm/amd/display/dc/dml2/dml2_wrapper.c | 4 +++- 4 files changed, 16 insertions(+), 10 deletions(-)
drivers/gpu/drm/amd/display/dc/clk_mgr/dcn32/dcn32_clk_mgr.c +6 -4
@@ -163,9 +163,14 @@ void dcn32_init_clocks(struct clk_mgr *clk_mgr_base) {struct clk_mgr_internal *clk_mgr =TO_CLK_MGR_INTERNAL (clk_mgr_base);unsigned int num_levels; -struct clk_limit_num_entries *num_entries_per_clk = &clk_mgr_base->bw_params->clk_table.num_entries_per_clk; +struct clk_limit_num_entries *num_entries_per_clk;unsigned int i; +if (!clk_mgr_base->bw_params) +return ; + + num_entries_per_clk = &clk_mgr_base->bw_params->clk_table.num_entries_per_clk; +memset (&(clk_mgr_base->clks),0 ,sizeof (struct dc_clocks )); clk_mgr_base->clks.p_state_change_support = true; clk_mgr_base->clks.prev_p_state_change_support = true;
@@ -173,9 +178,6 @@ void dcn32_init_clocks(struct clk_mgr *clk_mgr_base) clk_mgr->smu_present = false; clk_mgr->dpm_present = false; -if (!clk_mgr_base->bw_params) -return ; -if (!clk_mgr_base->force_smu_not_present &&dcn30_smu_get_smu_version (clk_mgr, &clk_mgr->smu_ver)) clk_mgr->smu_present = true;
drivers/gpu/drm/amd/display/dc/clk_mgr/dcn401/dcn401_clk_mgr.c +6 -4
@@ -207,9 +207,14 @@ static void dcn401_build_wm_range_table(struct clk_mgr *clk_mgr)void dcn401_init_clocks (struct clk_mgr *clk_mgr_base) {struct clk_mgr_internal *clk_mgr =TO_CLK_MGR_INTERNAL (clk_mgr_base); -struct clk_limit_num_entries *num_entries_per_clk = &clk_mgr_base->bw_params->clk_table.num_entries_per_clk; +struct clk_limit_num_entries *num_entries_per_clk;unsigned int i; +if (!clk_mgr_base->bw_params) +return ; + + num_entries_per_clk = &clk_mgr_base->bw_params->clk_table.num_entries_per_clk; +memset (&(clk_mgr_base->clks),0 ,sizeof (struct dc_clocks )); clk_mgr_base->clks.p_state_change_support = true; clk_mgr_base->clks.prev_p_state_change_support = true;
@@ -217,9 +222,6 @@ void dcn401_init_clocks(struct clk_mgr *clk_mgr_base) clk_mgr->smu_present = false; clk_mgr->dpm_present = false; -if (!clk_mgr_base->bw_params) -return ; -if (!clk_mgr_base->force_smu_not_present &&dcn30_smu_get_smu_version (clk_mgr, &clk_mgr->smu_ver)) clk_mgr->smu_present = true;
drivers/gpu/drm/amd/display/dc/dml/dcn20/dcn20_fpu.c +1 -1
@@ -1084,7 +1084,7 @@ static enum dcn_zstate_support_state decide_zstate_support(struct dc *dc, strucstruct dc_stream_status *stream_status = &context->stream_status[0 ];int minmum_z8_residency = dc->debug.minimum_z8_residency_time >0 ? dc->debug.minimum_z8_residency_time :1000 ;bool allow_z8 = context->bw_ctx.dml.vba.StutterPeriod > (double )minmum_z8_residency; -bool is_pwrseq0 = link->link_index ==0 ; +bool is_pwrseq0 = (link && link->link_index ==0 );bool is_psr = (link && (link->psr_settings.psr_version ==DC_PSR_VERSION_1 || link->psr_settings.psr_version ==DC_PSR_VERSION_SU_1 ) && !link->panel_config.psr.disable_psr);bool is_replay = link && link->replay_settings.replay_feature_enabled;
drivers/gpu/drm/amd/display/dc/dml2/dml2_wrapper.c +3 -1
@@ -687,12 +687,14 @@ static bool dml2_validate_and_build_resource(const struct dc *in_dc, struct dc_sstatic bool dml2_validate_only (struct dc_state *context) { -struct dml2_context *dml2 = context->bw_ctx.dml2; +struct dml2_context *dml2;unsigned int result =0 ;if (!context || context->stream_count ==0 )return true; + dml2 = context->bw_ctx.dml2; +/* Zero out before each call before proceeding */ memset (&dml2->v20.scratch,0 ,sizeof (struct dml2_wrapper_scratch ));memset (&dml2->v20.dml_core_ctx.policy,0 ,sizeof (struct dml_mode_eval_policy_st ));
Signature · 1 line
2.34.1
PATCH 24/39 drm/amd/display: Program CURSOR_DST_X_OFFSET in viewport space
In reply to Alex HungFrom: Alvin Lee <[email protected]>
[WHAT & HOW]
According to register specifications, the CURSOR_DST_X_OFFSET is relative to the start of the data viewport, not RECOUT space. In this case we must transform the cursor coordinates passed to hubp401_cursor_set_position into viewport space to program this register. This fixes an underflow issue that occurs in scaled mode with low refresh rate.
--- .../gpu/drm/amd/display/dc/hubp/dcn401/dcn401_hubp.c | 12 ++++++++++-- 1 file changed, 10 insertions(+), 2 deletions(-)
drivers/gpu/drm/amd/display/dc/hubp/dcn401/dcn401_hubp.c +10 -2
@@ -656,7 +656,9 @@ void hubp401_cursor_set_position(int y_pos = pos->y - param->recout.y;int rec_x_offset = x_pos - pos->x_hotspot;int rec_y_offset = y_pos - pos->y_hotspot; -uint32_t dst_x_offset; +int dst_x_offset; +int x_pos_viewport = x_pos * param->viewport.width / param->recout.width; +int x_hot_viewport = pos->x_hotspot * param->viewport.width / param->recout.width;uint32_t cur_en = pos->enable ?1 :0 ; hubp->curs_pos = *pos;
@@ -668,7 +670,13 @@ void hubp401_cursor_set_position(if (hubp->curs_attr.address.quad_part ==0 )return ; - dst_x_offset = (rec_x_offset >=0 ) ? rec_x_offset :0 ; +/* Translate the x position of the cursor from rect +* space into viewport space. CURSOR_DST_X_OFFSET +* is the offset relative to viewport start position. +*/ + dst_x_offset = x_pos_viewport - x_hot_viewport * + (1 + hubp->curs_attr.attribute_flags.bits.ENABLE_MAGNIFICATION); + dst_x_offset = (dst_x_offset >=0 ) ? dst_x_offset :0 ; dst_x_offset *= param->ref_clk_khz; dst_x_offset /= param->pixel_clk_khz;
Signature · 1 line
2.34.1
PATCH 25/39 drm/amd/display: Reset DSC memory status
In reply to Alex HungFrom: Duncan Ma <[email protected]>
[WHY]
When system exits idle state followed by enabling the display, DSC memory may still be forced in a deep sleep or shutdown state.
Intermittent DSC corruption is seen when display is visible.
[HOW]
When DSC is enabled, reset dsc memory to force and disable status.
--- .../drm/amd/display/dc/dsc/dcn20/dcn20_dsc.c | 24 +++----- .../drm/amd/display/dc/dsc/dcn20/dcn20_dsc.h | 9 +++ .../drm/amd/display/dc/dsc/dcn35/dcn35_dsc.c | 58 ++++++++++++++++++- 3 files changed, 71 insertions(+), 20 deletions(-)
drivers/gpu/drm/amd/display/dc/dsc/dcn20/dcn20_dsc.c +7 -17
@@ -32,16 +32,6 @@static void dsc_write_to_registers (struct display_stream_compressor *dsc,const struct dsc_reg_values *reg_vals); -/* Object I/F functions */ -static void dsc2_read_state (struct display_stream_compressor *dsc,struct dcn_dsc_state *s); -static bool dsc2_validate_stream (struct display_stream_compressor *dsc,const struct dsc_config *dsc_cfg); -static void dsc2_set_config (struct display_stream_compressor *dsc,const struct dsc_config *dsc_cfg, -struct dsc_optc_config *dsc_optc_cfg); -static void dsc2_enable (struct display_stream_compressor *dsc,int opp_pipe); -static void dsc2_disable (struct display_stream_compressor *dsc); -static void dsc2_disconnect (struct display_stream_compressor *dsc); -static void dsc2_wait_disconnect_pending_clear (struct display_stream_compressor *dsc); -static const struct dsc_funcs dcn20_dsc_funcs = { .dsc_get_enc_caps = dsc2_get_enc_caps, .dsc_read_state = dsc2_read_state,
@@ -156,7 +146,7 @@ void dsc2_get_enc_caps(struct dsc_enc_caps *dsc_enc_caps, int pixel_clock_100Hz)/* this function read dsc related register fields to be logged later in dcn10_log_hw_state * into a dcn_dsc_state struct. */ -static void dsc2_read_state (struct display_stream_compressor *dsc,struct dcn_dsc_state *s) +void dsc2_read_state (struct display_stream_compressor *dsc,struct dcn_dsc_state *s) {struct dcn20_dsc *dsc20 =TO_DCN20_DSC (dsc);
@@ -173,7 +163,7 @@ static void dsc2_read_state(struct display_stream_compressor *dsc, struct dcn_ds } -static bool dsc2_validate_stream (struct display_stream_compressor *dsc,const struct dsc_config *dsc_cfg) +bool dsc2_validate_stream (struct display_stream_compressor *dsc,const struct dsc_config *dsc_cfg) {struct dsc_optc_config dsc_optc_cfg;struct dcn20_dsc *dsc20 =TO_DCN20_DSC (dsc);
@@ -196,7 +186,7 @@ void dsc_config_log(struct display_stream_compressor *dsc, const struct dsc_confDC_LOG_DSC ("\tcolor_depth %d" , config->color_depth); } -static void dsc2_set_config (struct display_stream_compressor *dsc,const struct dsc_config *dsc_cfg, +void dsc2_set_config (struct display_stream_compressor *dsc,const struct dsc_config *dsc_cfg,struct dsc_optc_config *dsc_optc_cfg) {bool is_config_ok;
@@ -233,7 +223,7 @@ bool dsc2_get_packed_pps(struct display_stream_compressor *dsc, const struct dsc } -static void dsc2_enable (struct display_stream_compressor *dsc,int opp_pipe) +void dsc2_enable (struct display_stream_compressor *dsc,int opp_pipe) {struct dcn20_dsc *dsc20 =TO_DCN20_DSC (dsc);int dsc_clock_en;
@@ -258,7 +248,7 @@ static void dsc2_enable(struct display_stream_compressor *dsc, int opp_pipe) } -static void dsc2_disable (struct display_stream_compressor *dsc) +void dsc2_disable (struct display_stream_compressor *dsc) {struct dcn20_dsc *dsc20 =TO_DCN20_DSC (dsc);int dsc_clock_en;
@@ -277,14 +267,14 @@ static void dsc2_disable(struct display_stream_compressor *dsc) DSC_CLOCK_EN, 0); } -static void dsc2_wait_disconnect_pending_clear (struct display_stream_compressor *dsc) +void dsc2_wait_disconnect_pending_clear (struct display_stream_compressor *dsc) {struct dcn20_dsc *dsc20 =TO_DCN20_DSC (dsc);REG_WAIT (DSCRM_DSC_FORWARD_CONFIG ,DSCRM_DSC_DOUBLE_BUFFER_REG_UPDATE_PENDING ,0 ,2 ,50000 ); } -static void dsc2_disconnect (struct display_stream_compressor *dsc) +void dsc2_disconnect (struct display_stream_compressor *dsc) {struct dcn20_dsc *dsc20 =TO_DCN20_DSC (dsc);
drivers/gpu/drm/amd/display/dc/dsc/dcn20/dcn20_dsc.h +9 -0
@@ -597,5 +597,14 @@ bool dsc2_get_packed_pps(struct display_stream_compressor *dsc,const struct dsc_config *dsc_cfg, uint8_t *dsc_packed_pps); +void dsc2_read_state (struct display_stream_compressor *dsc,struct dcn_dsc_state *s); +bool dsc2_validate_stream (struct display_stream_compressor *dsc,const struct dsc_config *dsc_cfg); +void dsc2_set_config (struct display_stream_compressor *dsc,const struct dsc_config *dsc_cfg, +struct dsc_optc_config *dsc_optc_cfg); +void dsc2_enable (struct display_stream_compressor *dsc,int opp_pipe); +void dsc2_disable (struct display_stream_compressor *dsc); +void dsc2_disconnect (struct display_stream_compressor *dsc); +void dsc2_wait_disconnect_pending_clear (struct display_stream_compressor *dsc); +#endif
drivers/gpu/drm/amd/display/dc/dsc/dcn35/dcn35_dsc.c +55 -3
70 lines not on this page · raw message
Signature · 1 line
2.34.1
PATCH 26/39 drm/amd/display: Wait for double buffer update on ODM changes
In reply to Alex HungFrom: Alvin Lee <[email protected]>
[WHAT & HOW]
We must wait for ODM double buffer updates to complete before exiting the pipe update sequence or we may reduce DISPCLK and hit some transient underflow (pixel rate is reduced before the pipes have ODM enabled).
--- .../amd/display/dc/hwss/dcn20/dcn20_hwseq.c | 23 +++++++++++++++++++ .../amd/display/dc/inc/hw/timing_generator.h | 1 + .../amd/display/dc/optc/dcn10/dcn10_optc.h | 3 ++- .../amd/display/dc/optc/dcn32/dcn32_optc.c | 13 +++++++++++ .../amd/display/dc/optc/dcn32/dcn32_optc.h | 2 ++ .../amd/display/dc/optc/dcn401/dcn401_optc.c | 1 + .../amd/display/dc/optc/dcn401/dcn401_optc.h | 1 + 7 files changed, 43 insertions(+), 1 deletion(-)
drivers/gpu/drm/amd/display/dc/hwss/dcn20/dcn20_hwseq.c +23 -0
@@ -2227,6 +2227,29 @@ void dcn20_post_unlock_program_front_end( } } +for (i =0 ; i < dc->res_pool->pipe_count; i++) { +struct pipe_ctx *pipe = &context->res_ctx.pipe_ctx[i]; +struct pipe_ctx *old_pipe = &dc->current_state->res_ctx.pipe_ctx[i]; + +/* When going from a smaller ODM slice count to larger, we must ensure double +* buffer update completes before we return to ensure we don't reduce DISPCLK +* before we've transitioned to 2:1 or 4:1 +*/ +if (resource_is_pipe_type (old_pipe,OTG_MASTER ) &&resource_is_pipe_type (pipe,OTG_MASTER ) && +resource_get_odm_slice_count (old_pipe) <resource_get_odm_slice_count (pipe) && +dc_state_get_pipe_subvp_type (context, pipe) !=SUBVP_PHANTOM ) { +int j =0 ; +struct timing_generator *tg = pipe->stream_res.tg; + + +if (tg->funcs->get_double_buffer_pending) { +for (j =0 ; j <TIMEOUT_FOR_PIPE_ENABLE_US / polling_interval_us + && tg->funcs->get_double_buffer_pending (tg); j++) +udelay (polling_interval_us); + } + } + } +if (dc->res_pool->hubbub->funcs->force_pstate_change_control) dc->res_pool->hubbub->funcs->force_pstate_change_control ( dc->res_pool->hubbub, false, false);
drivers/gpu/drm/amd/display/dc/inc/hw/timing_generator.h +1 -0
@@ -340,6 +340,7 @@ struct timing_generator_funcs {void (*wait_drr_doublebuffer_pending_clear)(struct timing_generator *tg);void (*set_long_vtotal)(struct timing_generator *optc,const struct long_vtotal_params *params);void (*wait_odm_doublebuffer_pending_clear)(struct timing_generator *tg); + bool (*get_double_buffer_pending)(struct timing_generator *tg); };#endif
drivers/gpu/drm/amd/display/dc/optc/dcn10/dcn10_optc.h +2 -1
@@ -562,7 +562,8 @@ struct dcn_optc_registers {type OTG_CRC_DATA_FORMAT ;\type OTG_V_TOTAL_LAST_USED_BY_DRR ;\type OTG_DRR_TIMING_DBUF_UPDATE_PENDING ;\ -type OTG_H_TIMING_DIV_MODE_DB_UPDATE_PENDING ; +type OTG_H_TIMING_DIV_MODE_DB_UPDATE_PENDING ;\ +type OPTC_DOUBLE_BUFFER_PENDING ;\#define TG_REG_FIELD_LIST_DCN3_2 (type) \ type OTG_H_TIMING_DIV_MODE_MANUAL;
drivers/gpu/drm/amd/display/dc/optc/dcn32/dcn32_optc.c +13 -0
@@ -297,6 +297,18 @@ static void optc32_set_drr(optc32_setup_manual_trigger (optc); } +bool optc32_get_double_buffer_pending (struct timing_generator *optc) +{ +struct optc *optc1 =DCN10TG_FROM_TG (optc); +uint32_t update_pending =0 ; + +REG_GET (OPTC_INPUT_GLOBAL_CONTROL , +OPTC_DOUBLE_BUFFER_PENDING , + &update_pending); + +return (update_pending ==1 ); +} +static struct timing_generator_funcs dcn32_tg_funcs = { .validate_timing = optc1_validate_timing, .program_timing = optc1_program_timing,
@@ -361,6 +373,7 @@ static struct timing_generator_funcs dcn32_tg_funcs = { .setup_manual_trigger = optc2_setup_manual_trigger, .get_hw_timing = optc1_get_hw_timing, .is_two_pixels_per_container = optc1_is_two_pixels_per_container, + .get_double_buffer_pending = optc32_get_double_buffer_pending, };void dcn32_timing_generator_init (struct optc *optc1)
drivers/gpu/drm/amd/display/dc/optc/dcn32/dcn32_optc.h +2 -0
@@ -116,6 +116,7 @@SF (ODM0_OPTC_INPUT_CLOCK_CONTROL ,OPTC_INPUT_CLK_GATE_DIS , mask_sh),\SF (ODM0_OPTC_INPUT_GLOBAL_CONTROL ,OPTC_UNDERFLOW_OCCURRED_STATUS , mask_sh),\SF (ODM0_OPTC_INPUT_GLOBAL_CONTROL ,OPTC_UNDERFLOW_CLEAR , mask_sh),\ +SF (ODM0_OPTC_INPUT_GLOBAL_CONTROL ,OPTC_DOUBLE_BUFFER_PENDING , mask_sh),\SF (VTG0_CONTROL ,VTG0_ENABLE , mask_sh),\SF (VTG0_CONTROL ,VTG0_FP2 , mask_sh),\ SF(VTG0_CONTROL, VTG0_VCOUNT_INIT, mask_sh),\
@@ -184,5 +185,6 @@ void optc32_get_odm_combine_segments(struct timing_generator *tg, int *odm_combivoid optc32_set_odm_bypass (struct timing_generator *optc,const struct dc_crtc_timing *dc_crtc_timing);void optc32_wait_odm_doublebuffer_pending_clear (struct timing_generator *tg); +bool optc32_get_double_buffer_pending (struct timing_generator *optc);#endif /* __DC_OPTC_DCN32_H__ */
drivers/gpu/drm/amd/display/dc/optc/dcn401/dcn401_optc.c +1 -0
@@ -459,6 +459,7 @@ static struct timing_generator_funcs dcn401_tg_funcs = { .setup_manual_trigger = optc2_setup_manual_trigger, .get_hw_timing = optc1_get_hw_timing, .is_two_pixels_per_container = optc1_is_two_pixels_per_container, + .get_double_buffer_pending = optc32_get_double_buffer_pending, };void dcn401_timing_generator_init (struct optc *optc1)
drivers/gpu/drm/amd/display/dc/optc/dcn401/dcn401_optc.h +1 -0
@@ -94,6 +94,7 @@SF (ODM0_OPTC_INPUT_CLOCK_CONTROL ,OPTC_INPUT_CLK_ON , mask_sh),\SF (ODM0_OPTC_INPUT_CLOCK_CONTROL ,OPTC_INPUT_CLK_GATE_DIS , mask_sh),\SF (ODM0_OPTC_INPUT_GLOBAL_CONTROL ,OPTC_UNDERFLOW_OCCURRED_STATUS , mask_sh),\ +SF (ODM0_OPTC_INPUT_GLOBAL_CONTROL ,OPTC_DOUBLE_BUFFER_PENDING , mask_sh),\SF (ODM0_OPTC_INPUT_GLOBAL_CONTROL ,OPTC_UNDERFLOW_CLEAR , mask_sh),\SF (VTG0_CONTROL ,VTG0_ENABLE , mask_sh),\ SF(VTG0_CONTROL, VTG0_FP2, mask_sh),\
Signature · 1 line
2.34.1
PATCH 27/39 drm/amd/display: Fix cursor issues with ODMs and magnification
In reply to Alex HungFrom: Nevenko Stupar <[email protected]>
[WHY & HOW]
Adjust hot spot positions between ODM slices when cursor magnification is used.
--- .../gpu/drm/amd/display/dc/hwss/dcn401/dcn401_hwseq.c | 9 +++++++++ 1 file changed, 9 insertions(+)
drivers/gpu/drm/amd/display/dc/hwss/dcn401/dcn401_hwseq.c +9 -0
@@ -1177,6 +1177,15 @@ void dcn401_set_cursor_position(struct pipe_ctx *pipe_ctx)if (x_pos <0 ) { pos_cpy.x_hotspot -= x_pos; +if ((odm_combine_on) && (hubp->curs_attr.attribute_flags.bits.ENABLE_MAGNIFICATION)) { +if (hubp->curs_attr.width <=128 ) { + pos_cpy.x_hotspot /=2 ; + pos_cpy.x_hotspot +=1 ; + }else { + pos_cpy.x_hotspot /=2 ; + pos_cpy.x_hotspot +=2 ; + } + } x_pos =0 ; }
Signature · 1 line
2.34.1
PATCH 28/39 drm/amd/display: Add HW cursor visual confirm
In reply to Alex HungFrom: Ryan Seto <[email protected]>
[WHY]
Added HW cursor visual confirm
[HOW]
Added visual confirm logic when programming cursor positions. HW is programmed on cursor updates since cursor can change without flips.
--- .../gpu/drm/amd/display/dc/core/dc_stream.c | 29 +++++++++++++++++++ drivers/gpu/drm/amd/display/dc/dc.h | 1 + 2 files changed, 30 insertions(+)
drivers/gpu/drm/amd/display/dc/core/dc_stream.c +29 -0
@@ -416,6 +416,35 @@ bool dc_stream_program_cursor_position(if (reset_idle_optimizations && !dc->debug.disable_dmub_reallow_idle)dc_allow_idle_optimizations (dc, true); +/* apply/update visual confirm */ +if (dc->debug.visual_confirm ==VISUAL_CONFIRM_HW_CURSOR ) { +/* update software state */ +uint32_t color_value =MAX_TG_COLOR_VALUE ; +int i; + +for (i =0 ; i < dc->res_pool->pipe_count; i++) { +struct pipe_ctx *pipe_ctx = &dc->current_state->res_ctx.pipe_ctx[i]; + +/* adjust visual confirm color for all pipes with current stream */ +if (stream == pipe_ctx->stream) { +if (stream->cursor_position.enable) { + pipe_ctx->visual_confirm_color.color_r_cr = color_value; + pipe_ctx->visual_confirm_color.color_g_y =0 ; + pipe_ctx->visual_confirm_color.color_b_cb =0 ; + }else { + pipe_ctx->visual_confirm_color.color_r_cr =0 ; + pipe_ctx->visual_confirm_color.color_g_y =0 ; + pipe_ctx->visual_confirm_color.color_b_cb = color_value; + } + +/* programming hardware */ +if (pipe_ctx->plane_state) + dc->hwss.update_visual_confirm_color (dc, pipe_ctx, + pipe_ctx->plane_res.hubp->mpcc_id); + } + } + } +return true; }
drivers/gpu/drm/amd/display/dc/dc.h +1 -0
@@ -476,6 +476,7 @@ enum visual_confirm {VISUAL_CONFIRM_SUBVP =14 ,VISUAL_CONFIRM_MCLK_SWITCH =16 ,VISUAL_CONFIRM_FAMS2 =19 , + VISUAL_CONFIRM_HW_CURSOR = 20, }; enum dc_psr_power_opts {
Signature · 1 line
2.34.1
PATCH 29/39 drm/amd/display: Remove a redundant check in authenticated_dp
In reply to Alex HungFrom: Wenjing Liu <[email protected]>
[WHY]mod_hdcp_execute_and_set returns (*status == MOD_HDCP_STATUS_SUCCESS). When it return 0, it is guaranteed that status == MOD_HDCP_STATUS_SUCCESS will be evaluated as false. Since now we are using goto out already, all 3 if (status == MOD_HDCP_STATUS_SUCCESS) clauses are guaranteed to enter. Therefore we are removing the if statements due to redundancy.
--- .../display/modules/hdcp/hdcp1_execution.c | 27 +++++++++---------- 1 file changed, 12 insertions(+), 15 deletions(-)
drivers/gpu/drm/amd/display/modules/hdcp/hdcp1_execution.c +12 -15
@@ -432,21 +432,18 @@ static enum mod_hdcp_status authenticated_dp(struct mod_hdcp *hdcp, goto out; } -if (status ==MOD_HDCP_STATUS_SUCCESS ) -if (!mod_hdcp_execute_and_set (mod_hdcp_read_bstatus, - &input->bstatus_read, &status, - hdcp,"bstatus_read" )) - goto out; -if (status ==MOD_HDCP_STATUS_SUCCESS ) -if (!mod_hdcp_execute_and_set (check_link_integrity_dp, - &input->link_integrity_check, &status, - hdcp,"link_integrity_check" )) - goto out; -if (status ==MOD_HDCP_STATUS_SUCCESS ) -if (!mod_hdcp_execute_and_set (check_no_reauthentication_request_dp, - &input->reauth_request_check, &status, - hdcp,"reauth_request_check" )) - goto out; +if (!mod_hdcp_execute_and_set (mod_hdcp_read_bstatus, + &input->bstatus_read, &status, + hdcp,"bstatus_read" )) + goto out; +if (!mod_hdcp_execute_and_set (check_link_integrity_dp, + &input->link_integrity_check, &status, + hdcp,"link_integrity_check" )) + goto out; +if (!mod_hdcp_execute_and_set (check_no_reauthentication_request_dp, + &input->reauth_request_check, &status, + hdcp,"reauth_request_check" )) + goto out; out:return status; }
Signature · 1 line
2.34.1
PATCH 30/39 drm/amd/display: Adjust reg field for DSC wait for disconnect
In reply to Alex HungFrom: Ryan Seto <[email protected]>
[WHY]
DSC was waiting for the wrong field to disconnect cleanly.
[HOW]
Changed field the DSC disconnect was waiting on.
--- drivers/gpu/drm/amd/display/dc/dsc/dcn20/dcn20_dsc.h | 4 +++- drivers/gpu/drm/amd/display/dc/dsc/dcn401/dcn401_dsc.c | 2 +- drivers/gpu/drm/amd/display/dc/dsc/dcn401/dcn401_dsc.h | 3 ++- 3 files changed, 6 insertions(+), 3 deletions(-)
drivers/gpu/drm/amd/display/dc/dsc/dcn20/dcn20_dsc.h +3 -1
@@ -454,7 +454,9 @@type DSCCIF_UPDATE_TAKEN_ACK ; \type DSCRM_DSC_FORWARD_EN ; \type DSCRM_DSC_OPP_PIPE_SOURCE ; \ - type DSCRM_DSC_DOUBLE_BUFFER_REG_UPDATE_PENDING +type DSCRM_DSC_DOUBLE_BUFFER_REG_UPDATE_PENDING ; \ + type DSCRM_DSC_FORWARD_EN_STATUS +struct dcn20_dsc_registers {uint32_t DSC_TOP_CONTROL;
drivers/gpu/drm/amd/display/dc/dsc/dcn401/dcn401_dsc.c +1 -1
@@ -208,7 +208,7 @@ static void dsc401_wait_disconnect_pending_clear(struct display_stream_compresso {struct dcn401_dsc *dsc401 =TO_DCN401_DSC (dsc); -REG_WAIT (DSCRM_DSC_FORWARD_CONFIG ,DSCRM_DSC_DOUBLE_BUFFER_REG_UPDATE_PENDING ,0 ,2 ,50000 ); +REG_WAIT (DSCRM_DSC_FORWARD_CONFIG ,DSCRM_DSC_FORWARD_EN_STATUS ,0 ,2 ,50000 ); }static void dsc401_disconnect (struct display_stream_compressor *dsc)
drivers/gpu/drm/amd/display/dc/dsc/dcn401/dcn401_dsc.h +2 -1
@@ -196,7 +196,8 @@DSC2_SF (DSCCIF0 ,DSCCIF_CONFIG0__BITS_PER_COMPONENT , mask_sh), \DSC_SF (DSCCIF0_DSCCIF_CONFIG0 ,DOUBLE_BUFFER_REG_UPDATE_PENDING , mask_sh), \DSC_SF (DSCRM0_DSCRM_DSC_FORWARD_CONFIG ,DSCRM_DSC_FORWARD_EN , mask_sh), \ - DSC_SF(DSCRM0_DSCRM_DSC_FORWARD_CONFIG, DSCRM_DSC_OPP_PIPE_SOURCE, mask_sh) +DSC_SF (DSCRM0_DSCRM_DSC_FORWARD_CONFIG ,DSCRM_DSC_OPP_PIPE_SOURCE , mask_sh), \ + DSC_SF(DSCRM0_DSCRM_DSC_FORWARD_CONFIG, DSCRM_DSC_FORWARD_EN_STATUS, mask_sh)struct dcn401_dsc_registers {uint32_t DSC_TOP_CONTROL;
Signature · 1 line
2.34.1
PATCH 31/39 drm/amd/display: Fix 1DLUT setting for NL SDR blending
In reply to Alex HungFrom: Relja Vojvodic <[email protected]>
[WHY]
Enabling NL SDR blending caused the 1D LUTs to be set/populated in two different functions. This caused flickering as the LUT was set differently by the two functions, one of which should only have been modifying the 1D LUT if 3D LUT was enabled.
[HOW]
Added check to only modify the 1D LUT in populate_mcm if 3D LUT was enabled.
Added blend_tf function update for non-main planes if the 3D LUT path was taken.
--- drivers/gpu/drm/amd/display/dc/hwss/dcn401/dcn401_hwseq.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
drivers/gpu/drm/amd/display/dc/hwss/dcn401/dcn401_hwseq.c +2 -2
@@ -502,7 +502,7 @@ void dcn401_populate_mcm_luts(struct dc *dc,dcn401_get_mcm_lut_xable_from_pipe_ctx (dc, pipe_ctx, &shaper_xable, &lut3d_xable, &lut1d_xable);/* 1D LUT */ -if (mcm_luts.lut1d_func) { +if (mcm_luts.lut1d_func && lut3d_xable !=MCM_LUT_DISABLE ) {memset (&m_lut_params,0 ,sizeof (m_lut_params));if (mcm_luts.lut1d_func->type ==TF_TYPE_HWPWL ) m_lut_params.pwl = &mcm_luts.lut1d_func->pwl;
@@ -674,7 +674,7 @@ bool dcn401_set_mcm_luts(struct pipe_ctx *pipe_ctx, mpc->funcs->set_movable_cm_location (mpc,MPCC_MOVABLE_CM_LOCATION_BEFORE , mpcc_id); pipe_ctx->plane_state->mcm_location =MPCC_MOVABLE_CM_LOCATION_BEFORE ;// 1D LUT -if (!plane_state->mcm_lut1d_enable) { +if (plane_state->mcm_shaper_3dlut_setting ==DC_CM2_SHAPER_3DLUT_SETTING_BYPASS_ALL ) {if (plane_state->blend_tf.type ==TF_TYPE_HWPWL ) lut_params = &plane_state->blend_tf.pwl;else if (plane_state->blend_tf.type ==TF_TYPE_DISTRIBUTED_POINTS ) {
Signature · 1 line
2.34.1
PATCH 32/39 drm/amd/display: Use periodic detection for ipx/headless
In reply to Alex HungFrom: Roman Li <[email protected]>
[WHY]
Hotplug is not detected in headless (no eDP) mode on dcn35x. With no display dcn35x goes to IPS2 powersaving state where HPD interrupt is not handled.
[HOW]
Use idle worker thread for periodic detection of HPD in headless mode.
--- .../gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.h | 3 ++ .../amd/display/amdgpu_dm/amdgpu_dm_crtc.c | 48 +++++++++++++++---- .../amd/display/amdgpu_dm/amdgpu_dm_helpers.c | 5 +- 3 files changed, 46 insertions(+), 10 deletions(-)
drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.h +3 -0
@@ -989,4 +989,7 @@ void *dm_allocate_gpu_mem(struct amdgpu_device *adev,enum dc_gpu_mem_alloc_type type, size_t size, long long *addr); + +bool amdgpu_dm_is_headless (struct amdgpu_device *adev); +#endif /* __AMDGPU_DM_H__ */
drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_crtc.c +39 -9
72 lines not on this page · raw message
drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_helpers.c +4 -1
@@ -1239,8 +1239,11 @@ void dm_helpers_enable_periodic_detection(struct dc_context *ctx, bool enable) {struct amdgpu_device *adev = ctx->driver_context; -if (adev->dm.idle_workqueue) +if (adev->dm.idle_workqueue) { adev->dm.idle_workqueue->enable = enable; +if (enable && !adev->dm.idle_workqueue->running &&amdgpu_dm_is_headless (adev)) +schedule_work (&adev->dm.idle_workqueue->work); + } } void dm_helpers_dp_mst_update_branch_bandwidth(
Signature · 1 line
2.34.1
PATCH 33/39 drm/amd/display: Ensure curve to hw translation succeed
In reply to Alex Hung[WHAT & HOW]
Check cm3_helper_translate_curve_to_hw_format runs successfully so the regamma_params is valid and can be used.
Also revmoed two result assignments.
This fixes 2 CHECKED_RETURN UNUSED_VALUE issues reported by Coverity.
--- drivers/gpu/drm/amd/display/dc/hwss/dcn30/dcn30_hwseq.c | 5 ++++- drivers/gpu/drm/amd/display/dc/hwss/dcn32/dcn32_hwseq.c | 9 ++++++--- 2 files changed, 10 insertions(+), 4 deletions(-)
drivers/gpu/drm/amd/display/dc/hwss/dcn30/dcn30_hwseq.c +4 -1
@@ -228,8 +228,11 @@ bool dcn30_set_blend_lut(if (plane_state->blend_tf.type ==TF_TYPE_HWPWL ) blend_lut = &plane_state->blend_tf.pwl;else if (plane_state->blend_tf.type ==TF_TYPE_DISTRIBUTED_POINTS ) { -cm3_helper_translate_curve_to_hw_format ( + result =cm3_helper_translate_curve_to_hw_format ( &plane_state->blend_tf, &dpp_base->regamma_params, false); +if (!result) +return result; + blend_lut = &dpp_base->regamma_params; } result = dpp_base->funcs->dpp_program_blnd_lut (dpp_base, blend_lut);
drivers/gpu/drm/amd/display/dc/hwss/dcn32/dcn32_hwseq.c +6 -3
@@ -483,11 +483,14 @@ bool dcn32_set_mcm_luts(if (plane_state->blend_tf.type ==TF_TYPE_HWPWL ) lut_params = &plane_state->blend_tf.pwl;else if (plane_state->blend_tf.type ==TF_TYPE_DISTRIBUTED_POINTS ) { -cm3_helper_translate_curve_to_hw_format (&plane_state->blend_tf, + result =cm3_helper_translate_curve_to_hw_format (&plane_state->blend_tf, &dpp_base->regamma_params, false); +if (!result) +return result; + lut_params = &dpp_base->regamma_params; } - result = mpc->funcs->program_1dlut (mpc, lut_params, mpcc_id); + mpc->funcs->program_1dlut (mpc, lut_params, mpcc_id); lut_params =NULL ;// Shaper
@@ -501,7 +504,7 @@ bool dcn32_set_mcm_luts( lut_params = &dpp_base->shaper_params; } - result = mpc->funcs->program_shaper (mpc, lut_params, mpcc_id); + mpc->funcs->program_shaper (mpc, lut_params, mpcc_id);// 3D if (plane_state->lut3d_func.state.bits.initialized ==1 )
Signature · 1 line
2.34.1
PATCH 34/39 drm/amd/display: Validate function returns
In reply to Alex Hung[WHAT & HOW]
Function return values must be checked before data can be used in subsequent functions.
This fixes 4 CHECKED_RETURN issues reported by Coverity.
--- drivers/gpu/drm/amd/display/dc/dc_dmub_srv.c | 7 +++++-- drivers/gpu/drm/amd/display/dc/hubbub/dcn20/dcn20_hubbub.c | 3 ++- .../drm/amd/display/dc/link/protocols/link_dp_training.c | 3 +-- 3 files changed, 8 insertions(+), 5 deletions(-)
drivers/gpu/drm/amd/display/dc/dc_dmub_srv.c +5 -2
@@ -245,7 +245,9 @@ bool dc_dmub_srv_cmd_run_list(struct dc_dmub_srv *dc_dmub_srv, unsigned int counif (status ==DMUB_STATUS_POWER_STATE_D3 )return false; -dmub_srv_wait_for_idle (dmub,100000 ); + status =dmub_srv_wait_for_idle (dmub,100000 ); +if (status !=DMUB_STATUS_OK ) +return false;/* Requeue the command. */ status =dmub_srv_cmd_queue (dmub, &cmd_list[i]);
@@ -517,7 +519,8 @@ void dc_dmub_srv_get_visual_confirm_color_cmd(struct dc *dc, struct pipe_ctx *piunion dmub_rb_cmd cmd = {0 };unsigned int panel_inst =0 ; -dc_get_edp_link_panel_inst (dc, pipe_ctx->stream->link, &panel_inst); +if (!dc_get_edp_link_panel_inst (dc, pipe_ctx->stream->link, &panel_inst)) +return ;memset (&cmd,0 ,sizeof (cmd));
drivers/gpu/drm/amd/display/dc/hubbub/dcn20/dcn20_hubbub.c +2 -1
@@ -616,7 +616,8 @@ static bool hubbub2_program_watermarks( hubbub1->base.ctx->dc->clk_mgr->clks.p_state_change_support == false) safe_to_lower = true; -hubbub1_program_pstate_watermarks (hubbub, watermarks, refclk_mhz, safe_to_lower); +if (hubbub1_program_pstate_watermarks (hubbub, watermarks, refclk_mhz, safe_to_lower)) + wm_pending = true;REG_SET (DCHUBBUB_ARB_SAT_LEVEL ,0 ,DCHUBBUB_ARB_SAT_LEVEL ,60 * refclk_mhz);
drivers/gpu/drm/amd/display/dc/link/protocols/link_dp_training.c +1 -2
@@ -1663,8 +1663,7 @@ bool perform_link_training_with_retries(if (status ==LINK_TRAINING_ABORT ) {enum dc_connection_type type = dc_connection_none; -link_detect_connection_type (link, &type); -if (type == dc_connection_none) { +if (link_detect_connection_type (link, &type) && type == dc_connection_none) {DC_LOG_HW_LINK_TRAINING ("%s: Aborting training because sink unplugged\n" , __func__);break ; }
Signature · 1 line
2.34.1
PATCH 35/39 drm/amd/display: Remove always true condition
In reply to Alex Hung[WHAT & HOW]advanced_pstate_switching was initialized to false and never assigned to another value; as a result !advanced_pstate_switching is always true and should be removed.
This fixes 2 DEADCODE issues reported by Coverity.
--- drivers/gpu/drm/amd/display/dc/dml2/dml2_wrapper.c | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-)
drivers/gpu/drm/amd/display/dc/dml2/dml2_wrapper.c +1 -3
@@ -442,7 +442,6 @@ static bool optimize_pstate_with_svp_and_drr(struct dml2_context *dml2, struct dbool result = false;int drr_display_index =0 , non_svp_streams =0 ;bool force_svp = dml2->config.svp_pstate.force_enable_subvp; -bool advanced_pstate_switching = false; display_state->bw_ctx.bw.dcn.clk.fw_based_mclk_switching = false; display_state->bw_ctx.bw.dcn.legacy_svp_drr_stream_index_valid = false;
@@ -451,8 +450,7 @@ static bool optimize_pstate_with_svp_and_drr(struct dml2_context *dml2, struct dif (!result) { pstate_optimization_done = true; - }else if (!advanced_pstate_switching || - (s->mode_support_info.DRAMClockChangeSupport[0 ] != dml_dram_clock_change_unsupported && !force_svp)) { + }else if (s->mode_support_info.DRAMClockChangeSupport[0 ] != dml_dram_clock_change_unsupported && !force_svp) { pstate_optimization_success = true; pstate_optimization_done = true; }
Signature · 1 line
2.34.1
PATCH 36/39 drm/amd/display: Remove duplicate null check
In reply to Alex Hung[WHAT & HOW]
The same display null check was a few lines above.
This fixes 1 DEADCODE issue reported by Coverity.
--- drivers/gpu/drm/amd/display/modules/hdcp/hdcp_psp.c | 3 --- 1 file changed, 3 deletions(-)
drivers/gpu/drm/amd/display/modules/hdcp/hdcp_psp.c +0 -3
@@ -513,9 +513,6 @@ enum mod_hdcp_status mod_hdcp_hdcp2_create_session(struct mod_hdcp *hdcp) hdcp_cmd = (struct ta_hdcp_shared_memory *)psp->hdcp_context.context.mem_context.shared_buf;memset (hdcp_cmd,0 ,sizeof (struct ta_hdcp_shared_memory )); -if (!display) -return MOD_HDCP_STATUS_DISPLAY_NOT_FOUND ; - hdcp_cmd->in_msg.hdcp2_create_session_v2.display_handle = display->index;if (hdcp->connection.link.adjust.hdcp2.force_type ==MOD_HDCP_FORCE_TYPE_0 )
Signature · 1 line
2.34.1
PATCH 37/39 drm/amd: Add reg definitions for DCN401 DCC
In reply to Alex HungFrom: Aurabindo Pillai <[email protected]>
[WHAT]
Add the necessary register definitions to enable DCC on DCN4x
--- .../include/asic_reg/dcn/dcn_4_1_0_sh_mask.h | 110 ++++++++++++++++++ 1 file changed, 110 insertions(+)
drivers/gpu/drm/amd/include/asic_reg/dcn/dcn_4_1_0_sh_mask.h +110 -0
@@ -6430,6 +6430,28 @@//DCHUBBUB_SDPIF_MEM_PWR_STATUS #define DCHUBBUB_SDPIF_MEM_PWR_STATUS__DCHUBBUB_SDPIF_MEM_PWR_STATE__SHIFT 0x0#define DCHUBBUB_SDPIF_MEM_PWR_STATUS__DCHUBBUB_SDPIF_MEM_PWR_STATE_MASK 0x00000003L +//DCHUBBUB_SDPIF_MCACHE_INVALIDATION_CTL +#define DCHUBBUB_SDPIF_MCACHE_INVALIDATION_CTL__DCHUBBUB_SDPIF_FLIP_AWAY_MISSING_PIPE0__SHIFT 0x0 +#define DCHUBBUB_SDPIF_MCACHE_INVALIDATION_CTL__DCHUBBUB_SDPIF_FLIP_AWAY_MISSING_PIPE1__SHIFT 0x1 +#define DCHUBBUB_SDPIF_MCACHE_INVALIDATION_CTL__DCHUBBUB_SDPIF_FLIP_AWAY_MISSING_PIPE2__SHIFT 0x2 +#define DCHUBBUB_SDPIF_MCACHE_INVALIDATION_CTL__DCHUBBUB_SDPIF_FLIP_AWAY_MISSING_PIPE3__SHIFT 0x3 +#define DCHUBBUB_SDPIF_MCACHE_INVALIDATION_CTL__DCHUBBUB_SDPIF_MCACHEID_INV_ERR_CLEAR_PIPE0__SHIFT 0xc +#define DCHUBBUB_SDPIF_MCACHE_INVALIDATION_CTL__DCHUBBUB_SDPIF_MCACHEID_INV_ERR_CLEAR_PIPE1__SHIFT 0xd +#define DCHUBBUB_SDPIF_MCACHE_INVALIDATION_CTL__DCHUBBUB_SDPIF_MCACHEID_INV_ERR_CLEAR_PIPE2__SHIFT 0xe +#define DCHUBBUB_SDPIF_MCACHE_INVALIDATION_CTL__DCHUBBUB_SDPIF_MCACHEID_INV_ERR_CLEAR_PIPE3__SHIFT 0xf +#define DCHUBBUB_SDPIF_MCACHE_INVALIDATION_CTL__DCHUBBUB_SDPIF_MCACHEID_INV_ERR_ENABLE__SHIFT 0x1c +#define DCHUBBUB_SDPIF_MCACHE_INVALIDATION_CTL__DCHUBBUB_SDPIF_MCACHEID_INV_VREADY_MODE__SHIFT 0x1f +#define DCHUBBUB_SDPIF_MCACHE_INVALIDATION_CTL__DCHUBBUB_SDPIF_FLIP_AWAY_MISSING_PIPE0_MASK 0x00000001L +#define DCHUBBUB_SDPIF_MCACHE_INVALIDATION_CTL__DCHUBBUB_SDPIF_FLIP_AWAY_MISSING_PIPE1_MASK 0x00000002L +#define DCHUBBUB_SDPIF_MCACHE_INVALIDATION_CTL__DCHUBBUB_SDPIF_FLIP_AWAY_MISSING_PIPE2_MASK 0x00000004L +#define DCHUBBUB_SDPIF_MCACHE_INVALIDATION_CTL__DCHUBBUB_SDPIF_FLIP_AWAY_MISSING_PIPE3_MASK 0x00000008L +#define DCHUBBUB_SDPIF_MCACHE_INVALIDATION_CTL__DCHUBBUB_SDPIF_MCACHEID_INV_ERR_CLEAR_PIPE0_MASK 0x00001000L +#define DCHUBBUB_SDPIF_MCACHE_INVALIDATION_CTL__DCHUBBUB_SDPIF_MCACHEID_INV_ERR_CLEAR_PIPE1_MASK 0x00002000L +#define DCHUBBUB_SDPIF_MCACHE_INVALIDATION_CTL__DCHUBBUB_SDPIF_MCACHEID_INV_ERR_CLEAR_PIPE2_MASK 0x00004000L +#define DCHUBBUB_SDPIF_MCACHE_INVALIDATION_CTL__DCHUBBUB_SDPIF_MCACHEID_INV_ERR_CLEAR_PIPE3_MASK 0x00008000L +#define DCHUBBUB_SDPIF_MCACHE_INVALIDATION_CTL__DCHUBBUB_SDPIF_MCACHEID_INV_ERR_ENABLE_MASK 0x10000000L +#define DCHUBBUB_SDPIF_MCACHE_INVALIDATION_CTL__DCHUBBUB_SDPIF_MCACHEID_INV_VREADY_MODE_MASK 0x80000000L +// addressBlock: dcn_dcec_dchubbubl_hubbub_ret_path_dispdec
@@ -7084,6 +7106,11 @@#define HUBP0_DCSURF_PRI_VIEWPORT_START__PRI_VIEWPORT_Y_START__SHIFT 0x10#define HUBP0_DCSURF_PRI_VIEWPORT_START__PRI_VIEWPORT_X_START_MASK 0x0000FFFFL#define HUBP0_DCSURF_PRI_VIEWPORT_START__PRI_VIEWPORT_Y_START_MASK 0xFFFF0000L +//HUBP0_DCSURF_VIEWPORT_MCACHE_SPLIT_COORDINATE +#define HUBP0_DCSURF_VIEWPORT_MCACHE_SPLIT_COORDINATE__VIEWPORT_MCACHE_SPLIT_COORDINATE__SHIFT 0x0 +#define HUBP0_DCSURF_VIEWPORT_MCACHE_SPLIT_COORDINATE__VIEWPORT_MCACHE_SPLIT_COORDINATE_C__SHIFT 0x10 +#define HUBP0_DCSURF_VIEWPORT_MCACHE_SPLIT_COORDINATE__VIEWPORT_MCACHE_SPLIT_COORDINATE_MASK 0x0000FFFFL +#define HUBP0_DCSURF_VIEWPORT_MCACHE_SPLIT_COORDINATE__VIEWPORT_MCACHE_SPLIT_COORDINATE_C_MASK 0xFFFF0000L//HUBP0_DCSURF_PRI_VIEWPORT_DIMENSION #define HUBP0_DCSURF_PRI_VIEWPORT_DIMENSION__PRI_VIEWPORT_WIDTH__SHIFT 0x0#define HUBP0_DCSURF_PRI_VIEWPORT_DIMENSION__PRI_VIEWPORT_HEIGHT__SHIFT 0x10
@@ -7244,6 +7271,23 @@#define HUBP0_DCHUBP_MALL_SUB_VP2__SUB_VP_HEIGHT_NEXT_S1__SHIFT 0xc#define HUBP0_DCHUBP_MALL_SUB_VP2__SUB_VP_HEIGHT_CURR_S1_MASK 0x00000FFFL#define HUBP0_DCHUBP_MALL_SUB_VP2__SUB_VP_HEIGHT_NEXT_S1_MASK 0x00FFF000L +//HUBP0_DCHUBP_MCACHEID_CONFIG +#define HUBP0_DCHUBP_MCACHEID_CONFIG__MCACHEID_REG_READ_1H_P0__SHIFT 0x0 +#define HUBP0_DCHUBP_MCACHEID_CONFIG__MCACHEID_REG_READ_2H_P0__SHIFT 0x4 +#define HUBP0_DCHUBP_MCACHEID_CONFIG__MCACHEID_REG_READ_1H_P1__SHIFT 0x8 +#define HUBP0_DCHUBP_MCACHEID_CONFIG__MCACHEID_REG_READ_2H_P1__SHIFT 0xc +#define HUBP0_DCHUBP_MCACHEID_CONFIG__MCACHEID_MALL_PREF_1H_P0__SHIFT 0x10 +#define HUBP0_DCHUBP_MCACHEID_CONFIG__MCACHEID_MALL_PREF_2H_P0__SHIFT 0x14 +#define HUBP0_DCHUBP_MCACHEID_CONFIG__MCACHEID_MALL_PREF_1H_P1__SHIFT 0x18 +#define HUBP0_DCHUBP_MCACHEID_CONFIG__MCACHEID_MALL_PREF_2H_P1__SHIFT 0x1c +#define HUBP0_DCHUBP_MCACHEID_CONFIG__MCACHEID_REG_READ_1H_P0_MASK 0x0000000FL +#define HUBP0_DCHUBP_MCACHEID_CONFIG__MCACHEID_REG_READ_2H_P0_MASK 0x000000F0L +#define HUBP0_DCHUBP_MCACHEID_CONFIG__MCACHEID_REG_READ_1H_P1_MASK 0x00000F00L +#define HUBP0_DCHUBP_MCACHEID_CONFIG__MCACHEID_REG_READ_2H_P1_MASK 0x0000F000L +#define HUBP0_DCHUBP_MCACHEID_CONFIG__MCACHEID_MALL_PREF_1H_P0_MASK 0x000F0000L +#define HUBP0_DCHUBP_MCACHEID_CONFIG__MCACHEID_MALL_PREF_2H_P0_MASK 0x00F00000L +#define HUBP0_DCHUBP_MCACHEID_CONFIG__MCACHEID_MALL_PREF_1H_P1_MASK 0x0F000000L +#define HUBP0_DCHUBP_MCACHEID_CONFIG__MCACHEID_MALL_PREF_2H_P1_MASK 0xF0000000L//HUBP0_HUBP_MEASURE_WIN_CTRL_DCFCLK #define HUBP0_HUBP_MEASURE_WIN_CTRL_DCFCLK__HUBP_MEASURE_WIN_EN_DCFCLK__SHIFT 0x0#define HUBP0_HUBP_MEASURE_WIN_CTRL_DCFCLK__HUBP_MEASURE_WIN_PERIOD_M1_DCFCLK__SHIFT 0x4
@@ -8013,6 +8057,11 @@#define HUBP1_DCSURF_PRI_VIEWPORT_START__PRI_VIEWPORT_Y_START__SHIFT 0x10#define HUBP1_DCSURF_PRI_VIEWPORT_START__PRI_VIEWPORT_X_START_MASK 0x0000FFFFL#define HUBP1_DCSURF_PRI_VIEWPORT_START__PRI_VIEWPORT_Y_START_MASK 0xFFFF0000L +//HUBP1_DCSURF_VIEWPORT_MCACHE_SPLIT_COORDINATE +#define HUBP1_DCSURF_VIEWPORT_MCACHE_SPLIT_COORDINATE__VIEWPORT_MCACHE_SPLIT_COORDINATE__SHIFT 0x0 +#define HUBP1_DCSURF_VIEWPORT_MCACHE_SPLIT_COORDINATE__VIEWPORT_MCACHE_SPLIT_COORDINATE_C__SHIFT 0x10 +#define HUBP1_DCSURF_VIEWPORT_MCACHE_SPLIT_COORDINATE__VIEWPORT_MCACHE_SPLIT_COORDINATE_MASK 0x0000FFFFL +#define HUBP1_DCSURF_VIEWPORT_MCACHE_SPLIT_COORDINATE__VIEWPORT_MCACHE_SPLIT_COORDINATE_C_MASK 0xFFFF0000L//HUBP1_DCSURF_PRI_VIEWPORT_DIMENSION #define HUBP1_DCSURF_PRI_VIEWPORT_DIMENSION__PRI_VIEWPORT_WIDTH__SHIFT 0x0#define HUBP1_DCSURF_PRI_VIEWPORT_DIMENSION__PRI_VIEWPORT_HEIGHT__SHIFT 0x10
@@ -8173,6 +8222,23 @@#define HUBP1_DCHUBP_MALL_SUB_VP2__SUB_VP_HEIGHT_NEXT_S1__SHIFT 0xc#define HUBP1_DCHUBP_MALL_SUB_VP2__SUB_VP_HEIGHT_CURR_S1_MASK 0x00000FFFL#define HUBP1_DCHUBP_MALL_SUB_VP2__SUB_VP_HEIGHT_NEXT_S1_MASK 0x00FFF000L +//HUBP1_DCHUBP_MCACHEID_CONFIG +#define HUBP1_DCHUBP_MCACHEID_CONFIG__MCACHEID_REG_READ_1H_P0__SHIFT 0x0 +#define HUBP1_DCHUBP_MCACHEID_CONFIG__MCACHEID_REG_READ_2H_P0__SHIFT 0x4 +#define HUBP1_DCHUBP_MCACHEID_CONFIG__MCACHEID_REG_READ_1H_P1__SHIFT 0x8 +#define HUBP1_DCHUBP_MCACHEID_CONFIG__MCACHEID_REG_READ_2H_P1__SHIFT 0xc +#define HUBP1_DCHUBP_MCACHEID_CONFIG__MCACHEID_MALL_PREF_1H_P0__SHIFT 0x10 +#define HUBP1_DCHUBP_MCACHEID_CONFIG__MCACHEID_MALL_PREF_2H_P0__SHIFT 0x14 +#define HUBP1_DCHUBP_MCACHEID_CONFIG__MCACHEID_MALL_PREF_1H_P1__SHIFT 0x18 +#define HUBP1_DCHUBP_MCACHEID_CONFIG__MCACHEID_MALL_PREF_2H_P1__SHIFT 0x1c +#define HUBP1_DCHUBP_MCACHEID_CONFIG__MCACHEID_REG_READ_1H_P0_MASK 0x0000000FL +#define HUBP1_DCHUBP_MCACHEID_CONFIG__MCACHEID_REG_READ_2H_P0_MASK 0x000000F0L +#define HUBP1_DCHUBP_MCACHEID_CONFIG__MCACHEID_REG_READ_1H_P1_MASK 0x00000F00L +#define HUBP1_DCHUBP_MCACHEID_CONFIG__MCACHEID_REG_READ_2H_P1_MASK 0x0000F000L +#define HUBP1_DCHUBP_MCACHEID_CONFIG__MCACHEID_MALL_PREF_1H_P0_MASK 0x000F0000L +#define HUBP1_DCHUBP_MCACHEID_CONFIG__MCACHEID_MALL_PREF_2H_P0_MASK 0x00F00000L +#define HUBP1_DCHUBP_MCACHEID_CONFIG__MCACHEID_MALL_PREF_1H_P1_MASK 0x0F000000L +#define HUBP1_DCHUBP_MCACHEID_CONFIG__MCACHEID_MALL_PREF_2H_P1_MASK 0xF0000000L//HUBP1_HUBP_MEASURE_WIN_CTRL_DCFCLK #define HUBP1_HUBP_MEASURE_WIN_CTRL_DCFCLK__HUBP_MEASURE_WIN_EN_DCFCLK__SHIFT 0x0#define HUBP1_HUBP_MEASURE_WIN_CTRL_DCFCLK__HUBP_MEASURE_WIN_PERIOD_M1_DCFCLK__SHIFT 0x4
@@ -8942,6 +9008,11 @@#define HUBP2_DCSURF_PRI_VIEWPORT_START__PRI_VIEWPORT_Y_START__SHIFT 0x10#define HUBP2_DCSURF_PRI_VIEWPORT_START__PRI_VIEWPORT_X_START_MASK 0x0000FFFFL#define HUBP2_DCSURF_PRI_VIEWPORT_START__PRI_VIEWPORT_Y_START_MASK 0xFFFF0000L +//HUBP2_DCSURF_VIEWPORT_MCACHE_SPLIT_COORDINATE +#define HUBP2_DCSURF_VIEWPORT_MCACHE_SPLIT_COORDINATE__VIEWPORT_MCACHE_SPLIT_COORDINATE__SHIFT 0x0 +#define HUBP2_DCSURF_VIEWPORT_MCACHE_SPLIT_COORDINATE__VIEWPORT_MCACHE_SPLIT_COORDINATE_C__SHIFT 0x10 +#define HUBP2_DCSURF_VIEWPORT_MCACHE_SPLIT_COORDINATE__VIEWPORT_MCACHE_SPLIT_COORDINATE_MASK 0x0000FFFFL +#define HUBP2_DCSURF_VIEWPORT_MCACHE_SPLIT_COORDINATE__VIEWPORT_MCACHE_SPLIT_COORDINATE_C_MASK 0xFFFF0000L//HUBP2_DCSURF_PRI_VIEWPORT_DIMENSION #define HUBP2_DCSURF_PRI_VIEWPORT_DIMENSION__PRI_VIEWPORT_WIDTH__SHIFT 0x0#define HUBP2_DCSURF_PRI_VIEWPORT_DIMENSION__PRI_VIEWPORT_HEIGHT__SHIFT 0x10
@@ -9102,6 +9173,23 @@#define HUBP2_DCHUBP_MALL_SUB_VP2__SUB_VP_HEIGHT_NEXT_S1__SHIFT 0xc#define HUBP2_DCHUBP_MALL_SUB_VP2__SUB_VP_HEIGHT_CURR_S1_MASK 0x00000FFFL#define HUBP2_DCHUBP_MALL_SUB_VP2__SUB_VP_HEIGHT_NEXT_S1_MASK 0x00FFF000L +//HUBP2_DCHUBP_MCACHEID_CONFIG +#define HUBP2_DCHUBP_MCACHEID_CONFIG__MCACHEID_REG_READ_1H_P0__SHIFT 0x0 +#define HUBP2_DCHUBP_MCACHEID_CONFIG__MCACHEID_REG_READ_2H_P0__SHIFT 0x4 +#define HUBP2_DCHUBP_MCACHEID_CONFIG__MCACHEID_REG_READ_1H_P1__SHIFT 0x8 +#define HUBP2_DCHUBP_MCACHEID_CONFIG__MCACHEID_REG_READ_2H_P1__SHIFT 0xc +#define HUBP2_DCHUBP_MCACHEID_CONFIG__MCACHEID_MALL_PREF_1H_P0__SHIFT 0x10 +#define HUBP2_DCHUBP_MCACHEID_CONFIG__MCACHEID_MALL_PREF_2H_P0__SHIFT 0x14 +#define HUBP2_DCHUBP_MCACHEID_CONFIG__MCACHEID_MALL_PREF_1H_P1__SHIFT 0x18 +#define HUBP2_DCHUBP_MCACHEID_CONFIG__MCACHEID_MALL_PREF_2H_P1__SHIFT 0x1c +#define HUBP2_DCHUBP_MCACHEID_CONFIG__MCACHEID_REG_READ_1H_P0_MASK 0x0000000FL +#define HUBP2_DCHUBP_MCACHEID_CONFIG__MCACHEID_REG_READ_2H_P0_MASK 0x000000F0L +#define HUBP2_DCHUBP_MCACHEID_CONFIG__MCACHEID_REG_READ_1H_P1_MASK 0x00000F00L +#define HUBP2_DCHUBP_MCACHEID_CONFIG__MCACHEID_REG_READ_2H_P1_MASK 0x0000F000L +#define HUBP2_DCHUBP_MCACHEID_CONFIG__MCACHEID_MALL_PREF_1H_P0_MASK 0x000F0000L +#define HUBP2_DCHUBP_MCACHEID_CONFIG__MCACHEID_MALL_PREF_2H_P0_MASK 0x00F00000L +#define HUBP2_DCHUBP_MCACHEID_CONFIG__MCACHEID_MALL_PREF_1H_P1_MASK 0x0F000000L +#define HUBP2_DCHUBP_MCACHEID_CONFIG__MCACHEID_MALL_PREF_2H_P1_MASK 0xF0000000L//HUBP2_HUBP_MEASURE_WIN_CTRL_DCFCLK #define HUBP2_HUBP_MEASURE_WIN_CTRL_DCFCLK__HUBP_MEASURE_WIN_EN_DCFCLK__SHIFT 0x0#define HUBP2_HUBP_MEASURE_WIN_CTRL_DCFCLK__HUBP_MEASURE_WIN_PERIOD_M1_DCFCLK__SHIFT 0x4
@@ -9871,6 +9959,11 @@#define HUBP3_DCSURF_PRI_VIEWPORT_START__PRI_VIEWPORT_Y_START__SHIFT 0x10#define HUBP3_DCSURF_PRI_VIEWPORT_START__PRI_VIEWPORT_X_START_MASK 0x0000FFFFL#define HUBP3_DCSURF_PRI_VIEWPORT_START__PRI_VIEWPORT_Y_START_MASK 0xFFFF0000L +//HUBP3_DCSURF_VIEWPORT_MCACHE_SPLIT_COORDINATE +#define HUBP3_DCSURF_VIEWPORT_MCACHE_SPLIT_COORDINATE__VIEWPORT_MCACHE_SPLIT_COORDINATE__SHIFT 0x0 +#define HUBP3_DCSURF_VIEWPORT_MCACHE_SPLIT_COORDINATE__VIEWPORT_MCACHE_SPLIT_COORDINATE_C__SHIFT 0x10 +#define HUBP3_DCSURF_VIEWPORT_MCACHE_SPLIT_COORDINATE__VIEWPORT_MCACHE_SPLIT_COORDINATE_MASK 0x0000FFFFL +#define HUBP3_DCSURF_VIEWPORT_MCACHE_SPLIT_COORDINATE__VIEWPORT_MCACHE_SPLIT_COORDINATE_C_MASK 0xFFFF0000L//HUBP3_DCSURF_PRI_VIEWPORT_DIMENSION #define HUBP3_DCSURF_PRI_VIEWPORT_DIMENSION__PRI_VIEWPORT_WIDTH__SHIFT 0x0#define HUBP3_DCSURF_PRI_VIEWPORT_DIMENSION__PRI_VIEWPORT_HEIGHT__SHIFT 0x10
@@ -10031,6 +10124,23 @@#define HUBP3_DCHUBP_MALL_SUB_VP2__SUB_VP_HEIGHT_NEXT_S1__SHIFT 0xc#define HUBP3_DCHUBP_MALL_SUB_VP2__SUB_VP_HEIGHT_CURR_S1_MASK 0x00000FFFL#define HUBP3_DCHUBP_MALL_SUB_VP2__SUB_VP_HEIGHT_NEXT_S1_MASK 0x00FFF000L +//HUBP3_DCHUBP_MCACHEID_CONFIG +#define HUBP3_DCHUBP_MCACHEID_CONFIG__MCACHEID_REG_READ_1H_P0__SHIFT 0x0 +#define HUBP3_DCHUBP_MCACHEID_CONFIG__MCACHEID_REG_READ_2H_P0__SHIFT 0x4 +#define HUBP3_DCHUBP_MCACHEID_CONFIG__MCACHEID_REG_READ_1H_P1__SHIFT 0x8 +#define HUBP3_DCHUBP_MCACHEID_CONFIG__MCACHEID_REG_READ_2H_P1__SHIFT 0xc +#define HUBP3_DCHUBP_MCACHEID_CONFIG__MCACHEID_MALL_PREF_1H_P0__SHIFT 0x10 +#define HUBP3_DCHUBP_MCACHEID_CONFIG__MCACHEID_MALL_PREF_2H_P0__SHIFT 0x14 +#define HUBP3_DCHUBP_MCACHEID_CONFIG__MCACHEID_MALL_PREF_1H_P1__SHIFT 0x18 +#define HUBP3_DCHUBP_MCACHEID_CONFIG__MCACHEID_MALL_PREF_2H_P1__SHIFT 0x1c +#define HUBP3_DCHUBP_MCACHEID_CONFIG__MCACHEID_REG_READ_1H_P0_MASK 0x0000000FL +#define HUBP3_DCHUBP_MCACHEID_CONFIG__MCACHEID_REG_READ_2H_P0_MASK 0x000000F0L +#define HUBP3_DCHUBP_MCACHEID_CONFIG__MCACHEID_REG_READ_1H_P1_MASK 0x00000F00L +#define HUBP3_DCHUBP_MCACHEID_CONFIG__MCACHEID_REG_READ_2H_P1_MASK 0x0000F000L +#define HUBP3_DCHUBP_MCACHEID_CONFIG__MCACHEID_MALL_PREF_1H_P0_MASK 0x000F0000L +#define HUBP3_DCHUBP_MCACHEID_CONFIG__MCACHEID_MALL_PREF_2H_P0_MASK 0x00F00000L +#define HUBP3_DCHUBP_MCACHEID_CONFIG__MCACHEID_MALL_PREF_1H_P1_MASK 0x0F000000L +#define HUBP3_DCHUBP_MCACHEID_CONFIG__MCACHEID_MALL_PREF_2H_P1_MASK 0xF0000000L//HUBP3_HUBP_MEASURE_WIN_CTRL_DCFCLK #define HUBP3_HUBP_MEASURE_WIN_CTRL_DCFCLK__HUBP_MEASURE_WIN_EN_DCFCLK__SHIFT 0x0#define HUBP3_HUBP_MEASURE_WIN_CTRL_DCFCLK__HUBP_MEASURE_WIN_PERIOD_M1_DCFCLK__SHIFT 0x4
Signature · 1 line
2.34.1
PATCH 38/39 drm/amd/display: Enable DCC on DCN401
In reply to Alex HungFrom: Aurabindo Pillai <[email protected]>
[WHAT]
Add registers and entry points to enable DCC on DCN4x
--- drivers/gpu/drm/amd/display/dc/core/dc.c | 12 + .../drm/amd/display/dc/core/dc_hw_sequencer.c | 11 + drivers/gpu/drm/amd/display/dc/dc.h | 4 + .../drm/amd/display/dc/dml2/dml2_wrapper.c | 6 + .../drm/amd/display/dc/dml2/dml2_wrapper.h | 2 +- .../display/dc/hubbub/dcn30/dcn30_hubbub.c | 3 + .../display/dc/hubbub/dcn31/dcn31_hubbub.c | 3 + .../display/dc/hubbub/dcn401/dcn401_hubbub.c | 280 ++++++++++++++++++ .../display/dc/hubbub/dcn401/dcn401_hubbub.h | 5 + .../amd/display/dc/hubp/dcn20/dcn20_hubp.h | 14 + .../amd/display/dc/hubp/dcn401/dcn401_hubp.c | 21 ++ .../amd/display/dc/hubp/dcn401/dcn401_hubp.h | 14 +- .../amd/display/dc/hwss/dcn20/dcn20_hwseq.c | 4 + .../amd/display/dc/hwss/dcn401/dcn401_hwseq.c | 25 ++ .../amd/display/dc/hwss/dcn401/dcn401_hwseq.h | 2 + .../amd/display/dc/hwss/dcn401/dcn401_init.c | 1 + .../drm/amd/display/dc/hwss/hw_sequencer.h | 9 + .../gpu/drm/amd/display/dc/inc/core_types.h | 3 + .../gpu/drm/amd/display/dc/inc/hw/dchubbub.h | 4 + drivers/gpu/drm/amd/display/dc/inc/hw/hubp.h | 1 + .../dc/resource/dcn401/dcn401_resource.c | 9 + .../dc/resource/dcn401/dcn401_resource.h | 2 + 22 files changed, 433 insertions(+), 2 deletions(-)
drivers/gpu/drm/amd/display/dc/core/dc.c +12 -0
@@ -1264,6 +1264,9 @@ static void disable_dangling_plane(struct dc *dc, struct dc_state *context)apply_ctx_interdependent_lock (dc, dc->current_state, old_stream, false); dc->hwss.post_unlock_program_front_end (dc, dangling_context); } + +if (dc->res_pool->funcs->prepare_mcache_programming) + dc->res_pool->funcs->prepare_mcache_programming (dc, dangling_context);if (dc->hwss.program_front_end_for_ctx) { dc->hwss.interdependent_update_lock (dc, dc->current_state, true); dc->hwss.program_front_end_for_ctx (dc, dangling_context);
@@ -2037,6 +2040,8 @@ static enum dc_status dc_commit_state_no_check(struct dc *dc, struct dc_state *c }/* Program all planes within new context*/ +if (dc->res_pool->funcs->prepare_mcache_programming) + dc->res_pool->funcs->prepare_mcache_programming (dc, context);if (dc->hwss.program_front_end_for_ctx) { dc->hwss.interdependent_update_lock (dc, context, true); dc->hwss.program_front_end_for_ctx (dc, context);
@@ -3884,6 +3889,9 @@ static void commit_planes_for_stream(struct dc *dc, odm_pipe->ttu_regs.min_ttu_vblank =MAX_TTU ; } +if (update_type !=UPDATE_TYPE_FAST && dc->res_pool->funcs->prepare_mcache_programming) + dc->res_pool->funcs->prepare_mcache_programming (dc, context); +if ((update_type !=UPDATE_TYPE_FAST ) && stream->update_flags.bits.dsc_changed)if (top_pipe_to_program && top_pipe_to_program->stream_res.tg->funcs->lock_doublebuffer_enable) {
@@ -3903,6 +3911,10 @@ static void commit_planes_for_stream(struct dc *dc, top_pipe_to_program->stream_res.tg); } +if (dc->hwss.wait_for_dcc_meta_propagation) { + dc->hwss.wait_for_dcc_meta_propagation (dc, top_pipe_to_program); + } +if (should_lock_all_pipes && dc->hwss.interdependent_update_lock) {if (dc->hwss.subvp_pipe_control_lock) dc->hwss.subvp_pipe_control_lock (dc, context, true, should_lock_all_pipes,NULL , subvp_prev_use);
drivers/gpu/drm/amd/display/dc/core/dc_hw_sequencer.c +11 -0
@@ -595,6 +595,12 @@ void hwss_build_fast_sequence(struct dc *dc,if (!plane || !stream)return ; +if (dc->hwss.wait_for_dcc_meta_propagation) { + block_sequence[*num_steps].params.wait_for_dcc_meta_propagation_params.dc = dc; + block_sequence[*num_steps].params.wait_for_dcc_meta_propagation_params.top_pipe_to_program = pipe_ctx; + block_sequence[*num_steps].func =HUBP_WAIT_FOR_DCC_META_PROP ; + (*num_steps)++; + }if (dc->hwss.subvp_pipe_control_lock_fast) { block_sequence[*num_steps].params.subvp_pipe_control_lock_fast_params.dc = dc; block_sequence[*num_steps].params.subvp_pipe_control_lock_fast_params.lock = true;
@@ -835,6 +841,11 @@ void hwss_execute_sequence(struct dc *dc,case DMUB_SUBVP_SAVE_SURF_ADDR :hwss_subvp_save_surf_addr (params);break ; +case HUBP_WAIT_FOR_DCC_META_PROP : + dc->hwss.wait_for_dcc_meta_propagation ( + params->wait_for_dcc_meta_propagation_params.dc, + params->wait_for_dcc_meta_propagation_params.top_pipe_to_program); +break ;case DMUB_FAMS2_GLOBAL_CONTROL_LOCK_FAST : dc->hwss.fams2_global_control_lock_fast (params);break ;
drivers/gpu/drm/amd/display/dc/dc.h +4 -0
@@ -333,6 +333,9 @@ struct dc_dcc_setting { uint32_t dcc_128_128_uncontrained : 1; //available in ASICs before DCN 3.0 uint32_t dcc_256_128_128 : 1; //available starting with DCN 3.0 uint32_t dcc_256_256_unconstrained : 1; //available in ASICs before DCN 3.0 (the best compression case) + uint32_t dcc_256_256 : 1; //available in ASICs starting with DCN 4.0x (the best compression case) + uint32_t dcc_256_128 : 1; //available in ASICs starting with DCN 4.0x + uint32_t dcc_256_64 : 1; //available in ASICs starting with DCN 4.0x (the worst compression case) } dcc_controls; };
@@ -1037,6 +1040,7 @@ struct dc_debug_options {unsigned int static_screen_wait_frames;uint32_t pwm_freq;bool force_chroma_subsampling_1tap; +unsigned int dcc_meta_propagation_delay_us;bool disable_422_left_edge_pixel;bool dml21_force_pstate_method;uint32_t dml21_force_pstate_method_values[MAX_PIPES ];
drivers/gpu/drm/amd/display/dc/dml2/dml2_wrapper.c +6 -0
@@ -821,6 +821,12 @@ void dml2_extract_dram_and_fclk_change_support(struct dml2_context *dml2, *dram_clk_change_support = (unsigned int ) dml2->v20.dml_core_ctx.ms.support.DRAMClockChangeSupport[0 ]; } +void dml2_prepare_mcache_programming (struct dc *in_dc,struct dc_state *context,struct dml2_context *dml2) +{ +if (dml2->architecture == dml2_architecture_21) +dml21_prepare_mcache_programming (in_dc, context, dml2); +} +void dml2_copy (struct dml2_context *dst_dml2,struct dml2_context *src_dml2) {
drivers/gpu/drm/amd/display/dc/dml2/dml2_wrapper.h +1 -1
@@ -303,5 +303,5 @@ bool dml2_validate(const struct dc *in_dc,*/ void dml2_extract_dram_and_fclk_change_support (struct dml2_context *dml2,unsigned int *fclk_change_support,unsigned int *dram_clk_change_support); - +void dml2_prepare_mcache_programming (struct dc *in_dc,struct dc_state *context,struct dml2_context *dml2);#endif //_DML2_WRAPPER_H_
drivers/gpu/drm/amd/display/dc/hubbub/dcn30/dcn30_hubbub.c +3 -0
@@ -339,6 +339,7 @@ bool hubbub3_get_dcc_compression_cap(struct hubbub *hubbub,return false;switch (dcc_control) { +case dcc_control__256_256:case dcc_control__256_256_xxx: output->grph.rgb.max_uncompressed_blk_size =256 ; output->grph.rgb.max_compressed_blk_size =256 ;
@@ -346,6 +347,7 @@ bool hubbub3_get_dcc_compression_cap(struct hubbub *hubbub, output->grph.rgb.dcc_controls.dcc_256_256_unconstrained =1 ; output->grph.rgb.dcc_controls.dcc_256_128_128 =1 ;break ; +case dcc_control__256_128:case dcc_control__128_128_xxx: output->grph.rgb.max_uncompressed_blk_size =128 ; output->grph.rgb.max_compressed_blk_size =128 ;
@@ -353,6 +355,7 @@ bool hubbub3_get_dcc_compression_cap(struct hubbub *hubbub, output->grph.rgb.dcc_controls.dcc_128_128_uncontrained =1 ; output->grph.rgb.dcc_controls.dcc_256_128_128 =1 ;break ; +case dcc_control__256_64:case dcc_control__256_64_64: output->grph.rgb.max_uncompressed_blk_size =256 ; output->grph.rgb.max_compressed_blk_size =64 ;
drivers/gpu/drm/amd/display/dc/hubbub/dcn31/dcn31_hubbub.c +3 -0
@@ -866,6 +866,7 @@ static bool hubbub31_get_dcc_compression_cap(struct hubbub *hubbub,return false;switch (dcc_control) { +case dcc_control__256_256:case dcc_control__256_256_xxx: output->grph.rgb.max_uncompressed_blk_size =256 ; output->grph.rgb.max_compressed_blk_size =256 ;
@@ -881,12 +882,14 @@ static bool hubbub31_get_dcc_compression_cap(struct hubbub *hubbub, output->grph.rgb.dcc_controls.dcc_256_128_128 =1 ;break ;case dcc_control__256_64_64: +case dcc_control__256_64: output->grph.rgb.max_uncompressed_blk_size =256 ; output->grph.rgb.max_compressed_blk_size =64 ; output->grph.rgb.independent_64b_blks = true; output->grph.rgb.dcc_controls.dcc_256_64_64 =1 ;break ;case dcc_control__256_128_128: +case dcc_control__256_128: output->grph.rgb.max_uncompressed_blk_size =256 ; output->grph.rgb.max_compressed_blk_size =128 ; output->grph.rgb.independent_64b_blks = false;
drivers/gpu/drm/amd/display/dc/hubbub/dcn401/dcn401_hubbub.c +280 -0
292 lines not on this page · raw message
drivers/gpu/drm/amd/display/dc/hubbub/dcn401/dcn401_hubbub.h +5 -0
@@ -180,6 +180,11 @@ void hubbub401_det_request_size(bool *p0_req128_vert_wc, bool *p1_req128_horz_wc, bool *p1_req128_vert_wc); +bool hubbub401_get_dcc_compression_cap ( +struct hubbub *hubbub, +const struct dc_dcc_surface_param *input, +struct dc_surface_dcc_cap *output); + void hubbub401_construct(struct dcn20_hubbub *hubbub2, struct dc_context *ctx, const struct dcn_hubbub_registers *hubbub_regs,
drivers/gpu/drm/amd/display/dc/hubp/dcn20/dcn20_hubp.h +14 -0
@@ -175,6 +175,8 @@uint32_t HUBP_3DLUT_ADDRESS_LOW ;\uint32_t HUBP_3DLUT_CONTROL ;\uint32_t HUBP_3DLUT_DLG_PARAM ;\ +uint32_t DCSURF_VIEWPORT_MCACHE_SPLIT_COORDINATE ;\ + uint32_t DCHUBP_MCACHEID_CONFIG#define DCN2_HUBP_REG_FIELD_VARIABLE_LIST (type) \ DCN_HUBP_REG_FIELD_BASE_LIST(type); \
@@ -269,6 +271,18 @@type HUBP_3DLUT_ADDRESS_HIGH ;\type HUBP_3DLUT_ADDRESS_LOW ;\type REFCYC_PER_3DLUT_GROUP ;\ +type VIEWPORT_MCACHE_SPLIT_COORDINATE ;\ +type VIEWPORT_MCACHE_SPLIT_COORDINATE_C ;\ +type MCACHEID_REG_READ_1H_P0 ;\ +type MCACHEID_REG_READ_2H_P0 ;\ +type MCACHEID_REG_READ_1H_P1 ;\ +type MCACHEID_REG_READ_2H_P1 ;\ +type MCACHEID_MALL_PREF_1H_P0 ;\ +type MCACHEID_MALL_PREF_2H_P0 ;\ +type MCACHEID_MALL_PREF_1H_P1 ;\ + type MCACHEID_MALL_PREF_2H_P1 + +struct dcn_hubp2_registers {DCN401_HUBP_REG_COMMON_VARIABLE_LIST ;
drivers/gpu/drm/amd/display/dc/hubp/dcn401/dcn401_hubp.c +21 -0
@@ -626,6 +626,26 @@ void hubp401_set_viewport( SEC_VIEWPORT_Y_START_C, viewport_c->y); } +void hubp401_program_mcache_id_and_split_coordinate ( +struct hubp *hubp, +struct dml2_hubp_pipe_mcache_regs *mcache_regs) +{ +struct dcn20_hubp *hubp2 =TO_DCN20_HUBP (hubp); + +REG_SET_8 (DCHUBP_MCACHEID_CONFIG ,0 , +MCACHEID_REG_READ_1H_P0 , mcache_regs->main.p0.mcache_id_first, +MCACHEID_REG_READ_2H_P0 , mcache_regs->main.p0.mcache_id_second, +MCACHEID_REG_READ_1H_P1 , mcache_regs->main.p1.mcache_id_first, +MCACHEID_REG_READ_2H_P1 , mcache_regs->main.p1.mcache_id_second, +MCACHEID_MALL_PREF_1H_P0 , mcache_regs->mall.p0.mcache_id_first, +MCACHEID_MALL_PREF_2H_P0 , mcache_regs->mall.p0.mcache_id_second, +MCACHEID_MALL_PREF_1H_P1 , mcache_regs->mall.p1.mcache_id_first, +MCACHEID_MALL_PREF_2H_P1 , mcache_regs->mall.p1.mcache_id_second); + +REG_SET_2 (DCSURF_VIEWPORT_MCACHE_SPLIT_COORDINATE ,0 , +VIEWPORT_MCACHE_SPLIT_COORDINATE , mcache_regs->main.p0.split_location, +VIEWPORT_MCACHE_SPLIT_COORDINATE_C , mcache_regs->main.p1.split_location); +}void hubp401_set_flip_int (struct hubp *hubp) {struct dcn20_hubp *hubp2 =TO_DCN20_HUBP (hubp);
@@ -963,6 +983,7 @@ static struct hubp_funcs dcn401_hubp_funcs = { .phantom_hubp_post_enable = hubp32_phantom_hubp_post_enable, .hubp_update_mall_sel = hubp401_update_mall_sel, .hubp_prepare_subvp_buffering = hubp32_prepare_subvp_buffering, + .hubp_program_mcache_id_and_split_coordinate = hubp401_program_mcache_id_and_split_coordinate, .hubp_update_3dlut_fl_bias_scale = hubp401_update_3dlut_fl_bias_scale, .hubp_program_3dlut_fl_mode = hubp401_program_3dlut_fl_mode, .hubp_program_3dlut_fl_format = hubp401_program_3dlut_fl_format,
drivers/gpu/drm/amd/display/dc/hubp/dcn401/dcn401_hubp.h +13 -1
@@ -243,6 +243,16 @@HUBP_SF (CURSOR0_0_HUBP_3DLUT_ADDRESS_HIGH ,HUBP_3DLUT_ADDRESS_HIGH , mask_sh),\HUBP_SF (CURSOR0_0_HUBP_3DLUT_ADDRESS_LOW ,HUBP_3DLUT_ADDRESS_LOW , mask_sh),\HUBP_SF (CURSOR0_0_HUBP_3DLUT_DLG_PARAM ,REFCYC_PER_3DLUT_GROUP , mask_sh),\ +HUBP_SF (HUBP0_DCSURF_VIEWPORT_MCACHE_SPLIT_COORDINATE ,VIEWPORT_MCACHE_SPLIT_COORDINATE , mask_sh),\ +HUBP_SF (HUBP0_DCSURF_VIEWPORT_MCACHE_SPLIT_COORDINATE ,VIEWPORT_MCACHE_SPLIT_COORDINATE_C , mask_sh),\ +HUBP_SF (HUBP0_DCHUBP_MCACHEID_CONFIG ,MCACHEID_REG_READ_1H_P0 , mask_sh),\ +HUBP_SF (HUBP0_DCHUBP_MCACHEID_CONFIG ,MCACHEID_REG_READ_2H_P0 , mask_sh),\ +HUBP_SF (HUBP0_DCHUBP_MCACHEID_CONFIG ,MCACHEID_REG_READ_1H_P1 , mask_sh),\ +HUBP_SF (HUBP0_DCHUBP_MCACHEID_CONFIG ,MCACHEID_REG_READ_2H_P1 , mask_sh),\ +HUBP_SF (HUBP0_DCHUBP_MCACHEID_CONFIG ,MCACHEID_MALL_PREF_1H_P0 , mask_sh),\ +HUBP_SF (HUBP0_DCHUBP_MCACHEID_CONFIG ,MCACHEID_MALL_PREF_2H_P0 , mask_sh),\ +HUBP_SF (HUBP0_DCHUBP_MCACHEID_CONFIG ,MCACHEID_MALL_PREF_1H_P1 , mask_sh),\ + HUBP_SF(HUBP0_DCHUBP_MCACHEID_CONFIG, MCACHEID_MALL_PREF_2H_P1, mask_sh) void hubp401_update_mall_sel(struct hubp *hubp, uint32_t mall_sel, bool c_cursor);
@@ -302,7 +312,9 @@ void hubp401_program_surface_config(void hubp401_set_viewport (struct hubp *hubp,const struct rect *viewport,const struct rect *viewport_c); - +void hubp401_program_mcache_id_and_split_coordinate ( +struct hubp *hubp, +struct dml2_hubp_pipe_mcache_regs *mcache_regs);void hubp401_set_flip_int (struct hubp *hubp);bool hubp401_in_blank (struct hubp *hubp);
drivers/gpu/drm/amd/display/dc/hwss/dcn20/dcn20_hwseq.c +4 -0
@@ -1753,6 +1753,10 @@ static void dcn20_update_dchubp_dpp( &pipe_ctx->plane_res.scl_data.viewport_c); viewport_changed = true; } +if (hubp->funcs->hubp_program_mcache_id_and_split_coordinate) + hubp->funcs->hubp_program_mcache_id_and_split_coordinate ( + hubp, + &pipe_ctx->mcache_regs);/* Any updates are handled in dc interface, just need to apply existing for plane enable */ if ((pipe_ctx->update_flags.bits.enable || pipe_ctx->update_flags.bits.opp_changed ||
drivers/gpu/drm/amd/display/dc/hwss/dcn401/dcn401_hwseq.c +25 -0
@@ -1336,6 +1336,31 @@ bool dcn401_apply_idle_power_optimizations(struct dc *dc, bool enable)return true; } +void dcn401_wait_for_dcc_meta_propagation (const struct dc *dc, +const struct pipe_ctx *top_pipe) +{ +bool is_wait_needed = false; +const struct pipe_ctx *pipe_ctx = top_pipe; + +/* check if any surfaces are updating address while using flip immediate and dcc */ +while (pipe_ctx !=NULL ) { +if (pipe_ctx->plane_state && + pipe_ctx->plane_state->dcc.enable && + pipe_ctx->plane_state->flip_immediate && + pipe_ctx->plane_state->update_flags.bits.addr_update) { + is_wait_needed = true; +break ; + } + +/* check next pipe */ + pipe_ctx = pipe_ctx->bottom_pipe; + } + +if (is_wait_needed && dc->debug.dcc_meta_propagation_delay_us >0 ) { +udelay (dc->debug.dcc_meta_propagation_delay_us); + } +} +void dcn401_prepare_bandwidth (struct dc *dc,struct dc_state *context) {
drivers/gpu/drm/amd/display/dc/hwss/dcn401/dcn401_hwseq.h +2 -0
@@ -61,6 +61,8 @@ bool dcn401_apply_idle_power_optimizations(struct dc *dc, bool enable);struct ips_ono_region_state dcn401_read_ono_state (struct dc *dc,uint8_t region); +void dcn401_wait_for_dcc_meta_propagation (const struct dc *dc, +const struct pipe_ctx *top_pipe_to_program);void dcn401_prepare_bandwidth (struct dc *dc,struct dc_state *context);
drivers/gpu/drm/amd/display/dc/hwss/dcn401/dcn401_init.c +1 -0
@@ -94,6 +94,7 @@ static const struct hw_sequencer_funcs dcn401_funcs = { .update_dsc_pg = dcn32_update_dsc_pg, .apply_update_flags_for_phantom = dcn32_apply_update_flags_for_phantom, .blank_phantom = dcn32_blank_phantom, + .wait_for_dcc_meta_propagation = dcn401_wait_for_dcc_meta_propagation, .is_pipe_topology_transition_seamless = dcn32_is_pipe_topology_transition_seamless, .fams2_global_control_lock = dcn401_fams2_global_control_lock, .fams2_update_config = dcn401_fams2_update_config,
drivers/gpu/drm/amd/display/dc/hwss/hw_sequencer.h +9 -0
@@ -141,6 +141,11 @@ struct subvp_save_surf_addr {uint8_t subvp_index; }; +struct wait_for_dcc_meta_propagation_params { +const struct dc *dc; +const struct pipe_ctx *top_pipe_to_program; +}; +struct fams2_global_control_lock_fast_params {struct dc *dc;bool is_required;
@@ -165,6 +170,7 @@ union block_sequence_params {struct set_output_csc_params set_output_csc_params;struct set_ocsc_default_params set_ocsc_default_params;struct subvp_save_surf_addr subvp_save_surf_addr; +struct wait_for_dcc_meta_propagation_params wait_for_dcc_meta_propagation_params;struct fams2_global_control_lock_fast_params fams2_global_control_lock_fast_params; };
@@ -186,6 +192,7 @@ enum block_sequence_func {MPC_SET_OUTPUT_CSC ,MPC_SET_OCSC_DEFAULT ,DMUB_SUBVP_SAVE_SURF_ADDR , +HUBP_WAIT_FOR_DCC_META_PROP , DMUB_FAMS2_GLOBAL_CONTROL_LOCK_FAST, };
@@ -443,6 +450,8 @@ struct hw_sequencer_funcs {bool (*is_pipe_topology_transition_seamless)(struct dc *dc,const struct dc_state *cur_ctx,const struct dc_state *new_ctx); +void (*wait_for_dcc_meta_propagation)(const struct dc *dc, +const struct pipe_ctx *top_pipe_to_program);void (*fams2_global_control_lock)(struct dc *dc,struct dc_state *context,bool lock);
drivers/gpu/drm/amd/display/dc/inc/core_types.h +3 -0
@@ -97,6 +97,9 @@ struct resource_funcs {unsigned int (*calculate_mall_ways_from_bytes)(const struct dc *dc,unsigned int total_size_in_mall_bytes); +void (*prepare_mcache_programming)( +struct dc *dc, +struct dc_state *context);/** * @populate_dml_pipes - Populate pipe data struct *
drivers/gpu/drm/amd/display/dc/inc/hw/dchubbub.h +4 -0
@@ -40,6 +40,10 @@ enum dcc_control { dcc_control__128_128_xxx, dcc_control__256_64_64, dcc_control__256_128_128, + dcc_control__256_256, + dcc_control__256_128, + dcc_control__256_64, + }; enum segment_order {
drivers/gpu/drm/amd/display/dc/inc/hw/hubp.h +1 -0
@@ -257,6 +257,7 @@ struct hubp_funcs { unsigned int min_dst_y_next_start_optimized);void (*hubp_wait_pipe_read_start)(struct hubp *hubp); +void (*hubp_program_mcache_id_and_split_coordinate)(struct hubp *hubp,struct dml2_hubp_pipe_mcache_regs *mcache_regs);void (*hubp_update_3dlut_fl_bias_scale)(struct hubp *hubp,uint16_t bias,uint16_t scale);void (*hubp_program_3dlut_fl_mode)(struct hubp *hubp,enum hubp_3dlut_fl_mode mode);
drivers/gpu/drm/amd/display/dc/resource/dcn401/dcn401_resource.c +9 -0
@@ -1617,6 +1617,14 @@ bool dcn401_validate_bandwidth(struct dc *dc,return out; } +void dcn401_prepare_mcache_programming (struct dc *dc, +struct dc_state *context) +{ +if (dc->debug.using_dml21) +dml2_prepare_mcache_programming (dc, context, + context->power_source ==DC_POWER_SOURCE_DC ? context->bw_ctx.dml2_dc_power_source : context->bw_ctx.dml2); +} +static void dcn401_build_pipe_pix_clk_params (struct pipe_ctx *pipe_ctx) {const struct dc_stream_state *stream = pipe_ctx->stream;
@@ -1699,6 +1707,7 @@ static struct resource_funcs dcn401_res_pool_funcs = { .patch_unknown_plane_state = dcn401_patch_unknown_plane_state, .update_soc_for_wm_a = dcn30_update_soc_for_wm_a, .add_phantom_pipes = dcn32_add_phantom_pipes, + .prepare_mcache_programming = dcn401_prepare_mcache_programming, .build_pipe_pix_clk_params = dcn401_build_pipe_pix_clk_params, .calculate_mall_ways_from_bytes = dcn32_calculate_mall_ways_from_bytes, };
drivers/gpu/drm/amd/display/dc/resource/dcn401/dcn401_resource.h +2 -0
@@ -26,6 +26,8 @@ bool dcn401_validate_bandwidth(struct dc *dc,struct dc_state *context, bool fast_validate); +void dcn401_prepare_mcache_programming (struct dc *dc,struct dc_state *context); +/* Following are definitions for run time init of reg offsets */ /* HUBP */
Signature · 1 line
2.34.1
PATCH 39/39 drm/amd/display: 3.2.290
In reply to Alex HungFrom: Aric Cyr <[email protected]>
This version brings along the following:
- Enable DCC on DCN401
- Add reg definitions for DCN401 DCC
- Remove duplicate null check
- Remove always true condition
- Validate function returns
- Ensure curve to hw translation succeed
- Use periodic detection for ipx/headless
- Fix 1DLUT setting for NL SDR blending
- Adjust reg field for DSC wait for disconnect
- Remove a redundant check in authenticated_dp
- Add HW cursor visual confirm
- Fix cursor issues with ODMs and magnification
- Wait for double buffer update on ODM changes
- Reset DSC memory status
- Program CURSOR_DST_X_OFFSET in viewport space
- Add null checks before accessing struct elements
- Fix reduced resolution and refresh rate
- Make DML2.1 P-State method force per stream
- Add workaround to restrict max frac urgent for DPM0
- Call dpmm when checking mode support
- resync OTG after DIO FIFO resync
- Always enable HPO for DCN4 dGPU
- Use sw cursor for DCN401 with rotation
- Add Replay general cmd
- Check HDCP returned status
- Check and log for function error codes
- Check and log for function error codes
- Remove useless function call
- Fix uninitialized variables in dcn401
- Fix cursor size issues
- Run DC_LOG_DC after checking link->link_enc
- Remove redundant checks for pipe_ctx->stream
- Send DP_TOTAL_LTTPR_CNT during detection if LTTPR is present
- Fix cursor issues with ODMs and HW rotations
- Remove unnecessary variable
- Remove redundant var from display_rq_dig_calc in dml
- Refactor dccg401_get_other_enable_symclk_fe
--- drivers/gpu/drm/amd/display/dc/dc.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/gpu/drm/amd/display/dc/dc.h +1 -1
@@ -55,7 +55,7 @@ struct aux_payload;struct set_config_cmd_payload ;struct dmub_notification ; -#define DC_VER "3.2.289" +#define DC_VER "3.2.290"#define MAX_SURFACES 3#define MAX_PLANES 6
Signature · 1 line
2.34.1
[AMD Official Use Only - AMD Internal Distribution Only]
Hi all,
This week this patchset was tested on the following systems:
* Lenovo ThinkBook T13s Gen4 with AMD Ryzen 5 6600U
* MSI Gaming X Trio RX 6800
* Gigabyte Gaming OC RX 7900 XTX
These systems were tested on the following display/connection types:
* eDP, (1080p 60hz [5650U]) (1920x1200 60hz [6600U]) (2560x1600 120hz[6600U])
* VGA and DVI (1680x1050 60hz [DP to VGA/DVI, USB-C to VGA/DVI])
* DP/HDMI/USB-C (1440p 170hz, 4k 60hz, 4k 144hz, 4k 240hz [Includes USB-C to DP/HDMI adapters])
* Thunderbolt (LG Ultrafine 5k)
* MST (Startech MST14DP123DP [DP to 3x DP] and 2x 4k 60Hz displays)
* DSC (with Cable Matters 101075 [DP to 3x DP] with 3x 4k60 displays, and HP Hook G2 with 1 4k60 display)
* USB 4 (Kensington SD5700T and 1x 4k 60Hz display)
* PCON (Club3D CAC-1085 and 1x 4k 144Hz display [at 4k 120HZ, as that is the max the adapter supports])
The testing is a mix of automated and manual tests. Manual testing includes (but is not limited to):
* Changing display configurations and settings
* Benchmark testing
* Feature testing (Freesync, etc.)
Automated testing includes (but is not limited to):
* Script testing (scripts to automate some of the manual checks)
* IGT testing
The patchset consists of the amd-staging-drm-next branch (Head commit - f79aa6503388717045d02f0d268a8c59b3f005fb -> drm/amdgpu: remove amdgpu_mes_fence_wait_polling()) with new patches added on top of it.
Tested on Ubuntu 22.04.3, on Wayland and X11, using KDE Plasma and Gnome.
Thank you,
Dan Wheeler
Sr. Technologist | AMD
SW Display
------------------------------------------------------------------------------------------------------------------
1 Commerce Valley Dr E, Thornhill, ON L3T 7X6
amd.com
-----Original Message-----
From: Hung, Alex <[email protected]>
Sent: Thursday, June 20, 2024 12:11 PM
To: [email protected]
Cc: Wentland, Harry <[email protected]>; Li, Sun peng (Leo) <[email protected]>; Siqueira, Rodrigo <[email protected]>; Pillai, Aurabindo <[email protected]>; Li, Roman <[email protected]>; Lin, Wayne <[email protected]>; Gutierrez, Agustin <[email protected]>; Chung, ChiaHsuan (Tom) <[email protected]>; Zuo, Jerry <[email protected]>; Hung, Alex <[email protected]>; Wheeler, Daniel <[email protected]>
Subject: [PATCH 00/39] DC Patches June 20, 2024
This DC patchset brings improvements in multiple areas. In summary, we highlight:
* Enable DCC on DCN401
* Fix cursor issues
* Misc Coverity fixes
Alex Hung (12):
drm/amd/display: Remove redundant checks for pipe_ctx->stream drm/amd/display: Run DC_LOG_DC after checking link->link_enc drm/amd/display: Fix uninitialized variables in dcn401 drm/amd/display: Remove useless function call drm/amd/display: Check and log for function error codes drm/amd/display: Check and log for function error codes drm/amd/display: Check HDCP returned status drm/amd/display: Add null checks before accessing struct elements drm/amd/display: Ensure curve to hw translation succeed drm/amd/display: Validate function returns drm/amd/display: Remove always true condition drm/amd/display: Remove duplicate null check
Alvin Lee (2):
drm/amd/display: Program CURSOR_DST_X_OFFSET in viewport space drm/amd/display: Wait for double buffer update on ODM changes
Aric Cyr (1):
drm/amd/display: 3.2.290
Aurabindo Pillai (3):
drm/amd/display: Use sw cursor for DCN401 with rotation drm/amd: Add reg definitions for DCN401 DCC drm/amd/display: Enable DCC on DCN401
Daniel Sa (1):
drm/amd/display: Fix reduced resolution and refresh rate
Dillon Varone (1):
drm/amd/display: Make DML2.1 P-State method force per stream
Duncan Ma (1):
drm/amd/display: Reset DSC memory status
George Shen (1):
drm/amd/display: Call dpmm when checking mode support
Ivan Lipski (2):
drm/amd/display: Remove redundant var from display_rq_dig_calc in dml drm/amd/display: Remove unnecessary variable
Joan Lee (1):
drm/amd/display: Add Replay general cmd
Leo (Hanghong) Ma (1):
drm/amd/display: Always enable HPO for DCN4 dGPU
Michael Strauss (1):
drm/amd/display: Send DP_TOTAL_LTTPR_CNT during detection if LTTPR is
present
Nevenko Stupar (3):
drm/amd/display: Fix cursor issues with ODMs and HW rotations drm/amd/display: Fix cursor size issues drm/amd/display: Fix cursor issues with ODMs and magnification
Nicholas Susanto (1):
drm/amd/display: Temporarily disable HPO PG on DCN35
Relja Vojvodic (2):
drm/amd/display: Refactor dccg401_get_other_enable_symclk_fe drm/amd/display: Fix 1DLUT setting for NL SDR blending
Roman Li (1):
drm/amd/display: Use periodic detection for ipx/headless
Ryan Seto (2):
drm/amd/display: Add HW cursor visual confirm drm/amd/display: Adjust reg field for DSC wait for disconnect
Sung-huai Wang (1):
drm/amd/display: Add workaround to restrict max frac urgent for DPM0
TungYu Lu (1):
drm/amd/display: resync OTG after DIO FIFO resync
Wenjing Liu (1):
drm/amd/display: Remove a redundant check in authenticated_dp
.../gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c | 39 ++- .../gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.h | 3 + .../amd/display/amdgpu_dm/amdgpu_dm_crtc.c | 48 ++- .../amd/display/amdgpu_dm/amdgpu_dm_debugfs.c | 5 +- .../amd/display/amdgpu_dm/amdgpu_dm_helpers.c | 5 +- .../drm/amd/display/dc/bios/command_table2.c | 3 +- .../dc/clk_mgr/dcn201/dcn201_clk_mgr.c | 2 - .../display/dc/clk_mgr/dcn32/dcn32_clk_mgr.c | 10 +- .../dc/clk_mgr/dcn401/dcn401_clk_mgr.c | 10 +- drivers/gpu/drm/amd/display/dc/core/dc.c | 12 + .../drm/amd/display/dc/core/dc_hw_sequencer.c | 11 + .../gpu/drm/amd/display/dc/core/dc_stream.c | 29 ++ drivers/gpu/drm/amd/display/dc/dc.h | 9 +- drivers/gpu/drm/amd/display/dc/dc_dmub_srv.c | 7 +- drivers/gpu/drm/amd/display/dc/dc_types.h | 1 + .../amd/display/dc/dccg/dcn401/dcn401_dccg.c | 57 ++-- .../drm/amd/display/dc/dce/dce_link_encoder.c | 5 +- .../gpu/drm/amd/display/dc/dce/dmub_replay.c | 18 +- .../amd/display/dc/dcn10/dcn10_link_encoder.c | 8 +- .../drm/amd/display/dc/dml/dcn20/dcn20_fpu.c | 2 +- .../dc/dml/dcn20/display_rq_dlg_calc_20.c | 14 +- .../dc/dml/dcn20/display_rq_dlg_calc_20v2.c | 14 +- .../dc/dml/dcn21/display_rq_dlg_calc_21.c | 14 +- .../dc/dml/dcn30/display_rq_dlg_calc_30.c | 14 +- .../dc/dml/dcn31/display_rq_dlg_calc_31.c | 14 +- .../dc/dml/dcn314/display_rq_dlg_calc_314.c | 14 +- .../dc/dml2/dml21/dml21_translation_helper.c | 2 +- .../amd/display/dc/dml2/dml21/dml21_wrapper.c | 4 +- .../src/dml2_core/dml2_core_dcn4_calcs.c | 4 +- .../dc/dml2/dml21/src/dml2_top/dml_top.c | 17 ++ .../src/inc/dml2_internal_shared_types.h | 1 + .../drm/amd/display/dc/dml2/dml2_wrapper.c | 29 +- .../drm/amd/display/dc/dml2/dml2_wrapper.h | 6 +- .../amd/display/dc/dpp/dcn401/dcn401_dpp_cm.c | 50 ---- .../drm/amd/display/dc/dsc/dcn20/dcn20_dsc.c | 24 +- .../drm/amd/display/dc/dsc/dcn20/dcn20_dsc.h | 13 +- .../drm/amd/display/dc/dsc/dcn35/dcn35_dsc.c | 58 +++- .../amd/display/dc/dsc/dcn401/dcn401_dsc.c | 2 +- .../amd/display/dc/dsc/dcn401/dcn401_dsc.h | 3 +- .../display/dc/hubbub/dcn20/dcn20_hubbub.c | 3 +- .../display/dc/hubbub/dcn30/dcn30_hubbub.c | 3 + .../display/dc/hubbub/dcn31/dcn31_hubbub.c | 3 + .../display/dc/hubbub/dcn401/dcn401_hubbub.c | 280 ++++++++++++++++++ .../display/dc/hubbub/dcn401/dcn401_hubbub.h | 5 + .../amd/display/dc/hubp/dcn20/dcn20_hubp.h | 14 + .../amd/display/dc/hubp/dcn401/dcn401_hubp.c | 71 ++--- .../amd/display/dc/hubp/dcn401/dcn401_hubp.h | 14 +- .../amd/display/dc/hwss/dcn10/dcn10_hwseq.c | 17 -- .../amd/display/dc/hwss/dcn20/dcn20_hwseq.c | 34 ++- .../amd/display/dc/hwss/dcn30/dcn30_hwseq.c | 5 +- .../amd/display/dc/hwss/dcn32/dcn32_hwseq.c | 11 +- .../amd/display/dc/hwss/dcn401/dcn401_hwseq.c | 169 ++++------- .../amd/display/dc/hwss/dcn401/dcn401_hwseq.h | 2 + .../amd/display/dc/hwss/dcn401/dcn401_init.c | 2 +- .../drm/amd/display/dc/hwss/hw_sequencer.h | 9 + .../gpu/drm/amd/display/dc/inc/core_types.h | 3 + .../gpu/drm/amd/display/dc/inc/hw/dchubbub.h | 4 + drivers/gpu/drm/amd/display/dc/inc/hw/hubp.h | 1 + .../amd/display/dc/inc/hw/timing_generator.h | 1 + .../display/dc/link/accessories/link_dp_cts.c | 2 +- .../drm/amd/display/dc/link/link_factory.c | 6 +- .../dc/link/protocols/link_dp_capability.c | 31 +- .../dc/link/protocols/link_dp_training.c | 3 +- .../amd/display/dc/optc/dcn10/dcn10_optc.h | 3 +- .../amd/display/dc/optc/dcn32/dcn32_optc.c | 13 + .../amd/display/dc/optc/dcn32/dcn32_optc.h | 2 + .../amd/display/dc/optc/dcn401/dcn401_optc.c | 1 + .../amd/display/dc/optc/dcn401/dcn401_optc.h | 1 + .../dc/resource/dcn35/dcn35_resource.c | 5 +- .../dc/resource/dcn401/dcn401_resource.c | 9 + .../dc/resource/dcn401/dcn401_resource.h | 2 + .../gpu/drm/amd/display/include/dpcd_defs.h | 5 + .../display/modules/hdcp/hdcp1_execution.c | 24 +- .../drm/amd/display/modules/hdcp/hdcp_psp.c | 3 - .../include/asic_reg/dcn/dcn_4_1_0_sh_mask.h | 110 +++++++ 75 files changed, 1021 insertions(+), 431 deletions(-)
--
2.34.1