ARM: dts: qcom-msm8226-samsung-ms013g: Add initial device tree
v3 cover ARM: dts: qcom-msm8226-samsung-ms013g: Add initial device tree
Samsung Galaxy Grand 2 is a phone based on MSM8226. It's similar to the other Samsung devices based on MSM8226 with only a few minor differences.
The device trees contain initial support with:
- GPIO keys
- Regulator haptic
- SDHCI (internal and external storage)
- UART (on USB connector via the TI TSU6721 MUIC)
- Regulators
- Touchscreen
- Accelerometer
---
v2: Adjust l3, l15, l22 and l27 regulator voltages. Sort nodes.
Set regulator-allow-set-load for vqmmc supplies.
v3: Rename node haptic to vibrator.
PATCH v3 1/2 dt-bindings: arm: qcom: Document samsung,ms013g
Document samsung,ms013g for Galaxy Grand 2.
--- Documentation/devicetree/bindings/arm/qcom.yaml | 1 + 1 file changed, 1 insertion(+)
Documentation/devicetree/bindings/arm/qcom.yaml +1 -0
@@ -141,6 +141,7 @@ properties: - microsoft,makepeace - microsoft,moneypenny - motorola,falcon + - samsung,ms013g - samsung,s3ve3g - const: qcom,msm8226
Signature · 1 line
2.39.2
Re: [PATCH v3 1/2] dt-bindings: arm: qcom: Document samsung,ms013g
Quoted 3 lines · Raymond Hackley
Document samsung,ms013g for Galaxy Grand 2.
Signed-off-by Raymond Hackley <[email protected]>
<form letter>
This is a friendly reminder during the review process.
It looks like you received a tag and forgot to add it.
If you do not know the process, here is a short explanation:
Please add Acked-by/Reviewed-by/Tested-by tags when posting new versions, under or above your Signed-off-by tag. Tag is "received", when provided in a message replied to you on the mailing list. Tools like b4 can help here. However, there's no need to repost patches *only* to add the tags. The upstream maintainer will do that for tags received on the version they apply.
https://elixir.bootlin.com/linux/v6.5-rc3/source/Documentation/process/submitting-patches.rst#L577
If a tag was not added on purpose, please state why and what changed. </form letter>
Best regards,
Krzysztof
PATCH v3 2/2 ARM: dts: qcom-msm8226-samsung-ms013g: Add initial device tree
In reply to Raymond HackleySamsung Galaxy Grand 2 is a phone based on MSM8226. It's similar to the other Samsung devices based on MSM8226 with only a few minor differences.
The device trees contain initial support with:
- GPIO keys
- Regulator haptic
- SDHCI (internal and external storage)
- UART (on USB connector via the TI TSU6721 MUIC)
- Regulators
- Touchscreen
- Accelerometer
--- arch/arm/boot/dts/qcom/Makefile | 1 + .../dts/qcom/qcom-msm8226-samsung-ms013g.dts | 386 ++++++++++++++++++ 2 files changed, 387 insertions(+) create mode 100644 arch/arm/boot/dts/qcom/qcom-msm8226-samsung-ms013g.dts
arch/arm/boot/dts/qcom/Makefile +1 -0
@@ -28,6 +28,7 @@ dtb-$(CONFIG_ARCH_QCOM) += \ qcom-msm8226-microsoft-dempsey.dtb \ qcom-msm8226-microsoft-makepeace.dtb \ qcom-msm8226-microsoft-moneypenny.dtb \ + qcom-msm8226-samsung-ms013g.dtb \ qcom-msm8226-samsung-s3ve3g.dtb \ qcom-msm8660-surf.dtb \ qcom-msm8916-samsung-e5.dtb \
arch/arm/boot/dts/qcom/qcom-msm8226-samsung-ms013g.dts new file +386 -0
386 lines not on this page · raw message
Signature · 1 line
2.39.2
Rob Herring (Arm)
maintainerQuoted 12 lines · Raymond Hackley
Samsung Galaxy Grand 2 is a phone based on MSM8226. It's similar to the other Samsung devices based on MSM8226 with only a few minor differences.
The device trees contain initial support with:
- GPIO keys
- Regulator haptic
- SDHCI (internal and external storage)
- UART (on USB connector via the TI TSU6721 MUIC)
- Regulators
- Touchscreen
- Accelerometer
Quoted 7 lines
---
v2: Adjust l3, l15, l22 and l27 regulator voltages. Sort nodes.
Set regulator-allow-set-load for vqmmc supplies.
v3: Rename node haptic to vibrator.
My bot found new DTB warnings on the .dts files added or changed in this series.
Some warnings may be from an existing SoC .dtsi. Or perhaps the warnings are fixed by another series. Ultimately, it is up to the platform maintainer whether these warnings are acceptable or not. No need to reply unless the platform maintainer has comments.
If you already ran DT checks and didn't see these error(s), then make sure dt-schema is up to date:
pip3 install dtschema --upgrade
New warnings running 'make CHECK_DTBS=y qcom/qcom-msm8226-samsung-ms013g.dtb' for [email protected]:
arch/arm/boot/dts/qcom/qcom-msm8226-samsung-ms013g.dtb: syscon@f9011000: compatible: ['syscon'] is too short
from schema $id: http://devicetree.org/schemas/mfd/syscon-common.yaml#
Re: (subset) [PATCH v3 0/2] ARM: dts: qcom-msm8226-samsung-ms013g: Add initial device tree
In reply to Raymond HackleyQuoted 12 lines · Raymond Hackley
Samsung Galaxy Grand 2 is a phone based on MSM8226. It's similar to the other Samsung devices based on MSM8226 with only a few minor differences.
The device trees contain initial support with:
- GPIO keys
- Regulator haptic
- SDHCI (internal and external storage)
- UART (on USB connector via the TI TSU6721 MUIC)
- Regulators
- Touchscreen
- Accelerometer
Quoted 1 line
[...]
Applied, thanks!
[2/2] ARM: dts: qcom-msm8226-samsung-ms013g: Add initial device tree
commit: 2a5454d0fe5684855581f8ad958afbcdc476fd64
Best regards,
Signature · 1 line
Bjorn Andersson <[email protected]>