Skip to content

ARM: dts: qcom-msm8226-samsung-ms013g: Add initial device tree

Raymond Hackley linux-arm-msm linux-devicetree lkml phone-devel 3 versions – Applied

Status from this message: Applied, thanks!

Get series with b4
b4 am [email protected]

Versions newest first · linked by author and title

  1. v3 Latest2 patches 3 repliesApplied
  2. v22 patches 4 repliesSuperseded
  3. v12 patches 3 repliesSuperseded

Patches in v3 Applied

#Subject and filesSizeRepliesApplied
1/2dt-bindings: arm: qcom: Document samsung,ms013gDocumentation/devicetree/bindings/arm/qcom.yaml+1 -01 reply
2/2ARM: dts: qcom-msm8226-samsung-ms013g: Add initial device treearch/arm/boot/dts/qcom/Makefile arch/arm/boot/dts/qcom/qcom-msm8226-samsung-ms013g.dts+387 -00 replies

Reviews trailers per patch

1 of 2 patches has a Reviewed-by or Acked-by.

PatchLuca WeissKonrad Dybcio
1/2
2/2R-b R-b

Trailers given in replies are filled; those carried in the patches from earlier versions are outlined with dashes.

Read the v3 thread

Cover letter [PATCH v3 0/2] ARM: dts: qcom-msm8226-samsung-ms013g: Add initial device tree

Samsung Galaxy Grand 2 is a phone based on MSM8226. It's similar to the other Samsung devices based on MSM8226 with only a few minor differences.

The device trees contain initial support with:
- GPIO keys
- Regulator haptic
- SDHCI (internal and external storage)
- UART (on USB connector via the TI TSU6721 MUIC)
- Regulators
- Touchscreen
- Accelerometer

---
v2: Adjust l3, l15, l22 and l27 regulator voltages. Sort nodes.
Set regulator-allow-set-load for vqmmc supplies.
v3: Rename node haptic to vibrator.