Disable Clk-gate_tests for s390
PATCH 1/1 Disable Clk-gate_tests for s390
Currently clk-gate tests for s390 fail as the tests create a pretend clk-gate and use a "fake_reg" to emulate the expected behavior of the clk_gate->reg. I added some debug statements to the driver and noticed that the reg changes after initialization to -1, which is coming from an error coming from zpci_load(). This is likely because the test is using fake iomem and the s390 architecture likely isn't designed to handle that. Turn off the clk-gate tests for s390 for now as there is no clear work around for this problem as discussed in upstream conversation [1].
[1] https://lore.kernel.org/all/[email protected]/T/#t
--- drivers/clk/Kconfig | 1 + 1 file changed, 1 insertion(+)
drivers/clk/Kconfig +1 -0
@@ -514,6 +514,7 @@ config CLK_KUNIT_TEST config CLK_GATE_KUNIT_TEST tristate "Basic gate type Kunit test" if !KUNIT_ALL_TESTS depends on KUNIT + depends on !S390 default KUNIT_ALL_TESTS help Kunit test for the basic clk gate type.
Signature · 1 line
2.44.0
Quoting Audra Mitchell (2024-07-02 05:55:39)
Quoted 10 lines
Currently clk-gate tests for s390 fail as the tests create a pretend clk-gate and use a "
fake_reg" to emulate the expected behavior of theclk_gate->reg. I added some debug statements to the driver and noticed that the reg changes after initialization to -1, which is coming from an error coming fromzpci_load(). This is likely because the test is using fake iomem and the s390 architecture likely isn't designed to handle that. Turn off the clk-gate tests for s390 for now as there is no clear work around for this problem as discussed in upstream conversation [1].
Quoted 4 lines
[1] https://lore.kernel.org/all/[email protected]/T/#t
Signed-off-by Audra Mitchell <[email protected]>---
Applied to clk-next