riscv: spacemit: bananapi_f3: add support for Banana Pi F3 board
Subsystems (2)
v2 cover riscv: spacemit: bananapi_f3: add support for Banana Pi F3 board
Banana Pi F3 board is a industrial grade RISC-V development board, it design with SpacemiT K1 8 core RISC-V chip, CPU integrates 2.0 TOPs AI computing power. 4G DDR and 16G eMMC onboard.2x GbE Ethernet prot, 4x USB 3.0 and PCIe for M.2 interface, support HDMI and Dual MIPI-CSI Camera.
This patch introduces fundamental support for the Banana Pi F3 board, encompassing UART, CPU, and PLIC support. This ensures that U-Boot can operate in serial console mode.
Changes in v2:
- Change license to GPL-2.0-or-later
- Add memory node for dts
- Add ft_board_setup function for kernel memory init
- Use default prompt
Kongyang Liu (2):
riscv: spacemit: bananapi_f3: initial support added
doc: spacemit: bananapi_f3: document Banana Pi F3 board
arch/riscv/Kconfig | 5 + arch/riscv/cpu/k1/Kconfig | 18 ++ arch/riscv/cpu/k1/Makefile | 6 + arch/riscv/cpu/k1/cpu.c | 9 + arch/riscv/cpu/k1/dram.c | 54 ++++ arch/riscv/dts/Makefile | 1 + arch/riscv/dts/k1-bananapi-f3.dts | 25 ++ arch/riscv/dts/k1.dtsi | 375 +++++++++++++++++++++++++ board/spacemit/bananapi_f3/Kconfig | 25 ++ board/spacemit/bananapi_f3/MAINTAINERS | 6 + board/spacemit/bananapi_f3/Makefile | 5 + board/spacemit/bananapi_f3/board.c | 9 + configs/bananapi_f3_defconfig | 20 ++ doc/board/index.rst | 1 + doc/board/spacemit/bananapi_f3.rst | 78 +++++ doc/board/spacemit/index.rst | 8 + include/configs/bananapi_f3.h | 15 + 17 files changed, 660 insertions(+) create mode 100644 arch/riscv/cpu/k1/Kconfig create mode 100644 arch/riscv/cpu/k1/Makefile create mode 100644 arch/riscv/cpu/k1/cpu.c create mode 100644 arch/riscv/cpu/k1/dram.c create mode 100644 arch/riscv/dts/k1-bananapi-f3.dts create mode 100644 arch/riscv/dts/k1.dtsi create mode 100644 board/spacemit/bananapi_f3/Kconfig create mode 100644 board/spacemit/bananapi_f3/MAINTAINERS create mode 100644 board/spacemit/bananapi_f3/Makefile create mode 100644 board/spacemit/bananapi_f3/board.c create mode 100644 configs/bananapi_f3_defconfig create mode 100644 doc/board/spacemit/bananapi_f3.rst create mode 100644 doc/board/spacemit/index.rst create mode 100644 include/configs/bananapi_f3.h
Signature · 1 line
2.41.0
PATCH v2 1/2 riscv: spacemit: bananapi_f3: initial support added
Add basic support for SpacemiT's Banana Pi F3 board
---
Changes in v2:
- Change license to GPL-2.0-or-later
- Add memory node for dts
- Add ft_board_setup function for kernel memory init
- Use default prompt
arch/riscv/Kconfig | 5 + arch/riscv/cpu/k1/Kconfig | 18 ++ arch/riscv/cpu/k1/Makefile | 6 + arch/riscv/cpu/k1/cpu.c | 9 + arch/riscv/cpu/k1/dram.c | 54 ++++ arch/riscv/dts/Makefile | 1 + arch/riscv/dts/k1-bananapi-f3.dts | 25 ++ arch/riscv/dts/k1.dtsi | 375 +++++++++++++++++++++++++ board/spacemit/bananapi_f3/Kconfig | 25 ++ board/spacemit/bananapi_f3/MAINTAINERS | 6 + board/spacemit/bananapi_f3/Makefile | 5 + board/spacemit/bananapi_f3/board.c | 9 + configs/bananapi_f3_defconfig | 20 ++ include/configs/bananapi_f3.h | 15 + 14 files changed, 573 insertions(+) create mode 100644 arch/riscv/cpu/k1/Kconfig create mode 100644 arch/riscv/cpu/k1/Makefile create mode 100644 arch/riscv/cpu/k1/cpu.c create mode 100644 arch/riscv/cpu/k1/dram.c create mode 100644 arch/riscv/dts/k1-bananapi-f3.dts create mode 100644 arch/riscv/dts/k1.dtsi create mode 100644 board/spacemit/bananapi_f3/Kconfig create mode 100644 board/spacemit/bananapi_f3/MAINTAINERS create mode 100644 board/spacemit/bananapi_f3/Makefile create mode 100644 board/spacemit/bananapi_f3/board.c create mode 100644 configs/bananapi_f3_defconfig create mode 100644 include/configs/bananapi_f3.h
arch/riscv/Kconfig +5 -0
@@ -11,6 +11,9 @@ choice config TARGET_ANDES_AE350 bool "Support Andes ae350" +config TARGET_BANANAPI_F3 + bool "Support BananaPi F3 Board" + config TARGET_MICROCHIP_ICICLE bool "Support Microchip PolarFire-SoC Icicle Board"
@@ -88,6 +91,7 @@ source "board/sifive/unleashed/Kconfig" source "board/sifive/unmatched/Kconfig" source "board/sipeed/maix/Kconfig" source "board/sophgo/milkv_duo/Kconfig" +source "board/spacemit/bananapi_f3/Kconfig" source "board/starfive/visionfive2/Kconfig" source "board/thead/th1520_lpi4a/Kconfig" source "board/xilinx/mbv/Kconfig"
@@ -99,6 +103,7 @@ source "arch/riscv/cpu/fu540/Kconfig" source "arch/riscv/cpu/fu740/Kconfig" source "arch/riscv/cpu/generic/Kconfig" source "arch/riscv/cpu/jh7110/Kconfig" +source "arch/riscv/cpu/k1/Kconfig" # architecture-specific options below
arch/riscv/cpu/k1/Kconfig new file +18 -0
@@ -0,0 +1,18 @@ +# SPDX-License-Identifier: GPL-2.0-or-later +# +# Copyright (C) 2024, Kongyang Liu <[email protected]> + +config SPACEMIT_K1 + bool + select BINMAN + select ARCH_EARLY_INIT_R + select SYS_CACHE_SHIFT_6 + imply CPU + imply CPU_RISCV + imply RISCV_TIMER if (RISCV_SMODE || SPL_RISCV_SMODE) + imply RISCV_ACLINT if RISCV_MMODE + imply SPL_RISCV_ACLINT if SPL_RISCV_MMODE + imply CMD_CPU + imply SPL_CPU + imply SPL_OPENSBI + imply SPL_LOAD_FIT
arch/riscv/cpu/k1/Makefile new file +6 -0
@@ -0,0 +1,6 @@ +# SPDX-License-Identifier: GPL-2.0-or-later +# +# Copyright (c) 2024, Kongyang Liu <[email protected]> + +obj-y += dram.o +obj-y += cpu.o
arch/riscv/cpu/k1/cpu.c new file +9 -0
@@ -0,0 +1,9 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* +* Copyright (c) 2024, Kongyang Liu <[email protected]> +*/ + +int cleanup_before_linux (void ) +{ +return 0 ; +}
arch/riscv/cpu/k1/dram.c new file +54 -0
54 lines not on this page · raw message
arch/riscv/dts/Makefile +1 -0
@@ -1,6 +1,7 @@ # SPDX-License-Identifier: GPL-2.0+ dtb-$(CONFIG_TARGET_ANDES_AE350) += ae350_32.dtb ae350_64.dtb +dtb-$(CONFIG_TARGET_BANANAPI_F3) += k1-bananapi-f3.dtb dtb-$(CONFIG_TARGET_MICROCHIP_ICICLE) += mpfs-icicle-kit.dtb dtb-$(CONFIG_TARGET_MILKV_DUO) += cv1800b-milkv-duo.dtb dtb-$(CONFIG_TARGET_QEMU_VIRT) += qemu-virt32.dtb qemu-virt64.dtb
arch/riscv/dts/k1-bananapi-f3.dts new file +25 -0
@@ -0,0 +1,25 @@ +// SPDX-License-Identifier: GPL-2.0 OR MIT +/* + * Copyright (C) 2024 Yangyu Chen <[email protected]> + */ + +#include "k1.dtsi" +#include "binman.dtsi" + +/ { + model = "Banana Pi BPI-F3"; + compatible = "bananapi,bpi-f3", "spacemit,k1"; + + chosen { + stdout-path = "serial0"; + }; + + memory@0 { + device_type = "memory"; + reg = <0x00000000 0x00000000 0x00000000 0x80000000>; + }; +}; + +&uart0 { + status = "okay"; +};
arch/riscv/dts/k1.dtsi new file +375 -0
375 lines not on this page · raw message
board/spacemit/bananapi_f3/Kconfig new file +25 -0
@@ -0,0 +1,25 @@ +if TARGET_BANANAPI_F3 + +config SYS_BOARD + default "bananapi_f3" + +config SYS_VENDOR + default "spacemit" + +config SYS_CPU + default "k1" + +config SYS_CONFIG_NAME + default "bananapi_f3" + +config TEXT_BASE + default 0x00200000 + +config SPL_OPENSBI_LOAD_ADDR + default 0x00000000 + +config BOARD_SPECIFIC_OPTIONS + def_bool y + select SPACEMIT_K1 + +endif
board/spacemit/bananapi_f3/MAINTAINERS new file +6 -0
@@ -0,0 +1,6 @@ +BananaPi F3 +M: Kongyang Liu <[email protected]> +S: Maintained +F: board/spacemit/bananapi_f3/ +F: configs/bananapi_f3_defconfig +F: doc/board/spacemit/bananapi_f3.rst
board/spacemit/bananapi_f3/Makefile new file +5 -0
@@ -0,0 +1,5 @@ +# SPDX-License-Identifier: GPL-2.0-or-later +# +# Copyright (c) 2024, Kongyang Liu <[email protected]> + +obj-y := board.o
board/spacemit/bananapi_f3/board.c new file +9 -0
@@ -0,0 +1,9 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* +* Copyright (c) 2024, Kongyang Liu <[email protected]> +*/ + +int board_init (void ) +{ +return 0 ; +}
configs/bananapi_f3_defconfig new file +20 -0
@@ -0,0 +1,20 @@ +CONFIG_RISCV=y +CONFIG_SYS_MALLOC_LEN=0x1000000 +CONFIG_NR_DRAM_BANKS=2 +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x1000000 +CONFIG_DEFAULT_DEVICE_TREE="k1-bananapi-f3" +CONFIG_SYS_LOAD_ADDR=0x200000 +CONFIG_TARGET_BANANAPI_F3=y +CONFIG_ARCH_RV64I=y +CONFIG_RISCV_SMODE=y +CONFIG_FIT=y +CONFIG_SYS_BOOTM_LEN=0xa000000 +CONFIG_SUPPORT_RAW_INITRD=y +CONFIG_OF_BOARD_SETUP=y +CONFIG_SYS_CBSIZE=256 +CONFIG_SYS_PBSIZE=276 +CONFIG_HUSH_PARSER=y +CONFIG_ENV_OVERWRITE=y +CONFIG_SYS_NS16550=y +CONFIG_SYS_NS16550_MEM32=y
include/configs/bananapi_f3.h new file +15 -0
@@ -0,0 +1,15 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ +/* +* Copyright (c) 2024, Kongyang Liu <[email protected]> +* +*/ + +#ifndef __CONFIG_H +#define __CONFIG_H + +#include <linux/serial_reg.h> + +#define CFG_SYS_SDRAM_BASE 0x0 +#define CFG_SYS_NS16550_IER UART_IER_UUE + +#endif /* __CONFIG_H */
Signature · 1 line
2.41.0
Re: [PATCH v2 1/2] riscv: spacemit: bananapi_f3: initial support added
Quoted 30 lines · Kongyang Liu
Add basic support for SpacemiT's Banana Pi F3 board
Signed-off-by Kongyang Liu <[email protected]>---
Changes in v2:
- Change license to GPL-2.0-or-later
- Add memory node for dts
- Addft_board_setupfunction for kernel memory init
- Use default promptarch/riscv/Kconfig | 5 + arch/riscv/cpu/k1/Kconfig | 18 ++ arch/riscv/cpu/k1/Makefile | 6 + arch/riscv/cpu/k1/cpu.c | 9 + arch/riscv/cpu/k1/dram.c | 54 ++++ arch/riscv/dts/Makefile | 1 + arch/riscv/dts/k1-bananapi-f3.dts | 25 ++ arch/riscv/dts/k1.dtsi | 375 +++++++++++++++++++++++++ board/spacemit/bananapi_f3/Kconfig | 25 ++ board/spacemit/bananapi_f3/MAINTAINERS | 6 + board/spacemit/bananapi_f3/Makefile | 5 + board/spacemit/bananapi_f3/board.c | 9 + configs/bananapi_f3_defconfig | 20 ++ include/configs/bananapi_f3.h | 15 + 14 files changed, 573 insertions(+) create mode 100644 arch/riscv/cpu/k1/Kconfig create mode 100644 arch/riscv/cpu/k1/Makefile create mode 100644 arch/riscv/cpu/k1/cpu.c create mode 100644 arch/riscv/cpu/k1/dram.c
Quoted 8 lines
create mode 100644 arch/riscv/dts/k1-bananapi-f3.dts create mode 100644 arch/riscv/dts/k1.dtsi create mode 100644 board/spacemit/bananapi_f3/Kconfig create mode 100644 board/spacemit/bananapi_f3/MAINTAINERS create mode 100644 board/spacemit/bananapi_f3/Makefile create mode 100644 board/spacemit/bananapi_f3/board.c create mode 100644 configs/bananapi_f3_defconfig create mode 100644 include/configs/bananapi_f3.h
Re: [PATCH v2 1/2] riscv: spacemit: bananapi_f3: initial support added
In reply to Kongyang LiuQuoted 31 lines · Kongyang Liu
Add basic support for SpacemiT's Banana Pi F3 board
Signed-off-by Kongyang Liu <[email protected]>Reviewed-by Leo Yu-Chi Liang <[email protected]>---
Changes in v2:
- Change license to GPL-2.0-or-later
- Add memory node for dts
- Addft_board_setupfunction for kernel memory init
- Use default promptarch/riscv/Kconfig | 5 + arch/riscv/cpu/k1/Kconfig | 18 ++ arch/riscv/cpu/k1/Makefile | 6 + arch/riscv/cpu/k1/cpu.c | 9 + arch/riscv/cpu/k1/dram.c | 54 ++++ arch/riscv/dts/Makefile | 1 + arch/riscv/dts/k1-bananapi-f3.dts | 25 ++ arch/riscv/dts/k1.dtsi | 375 +++++++++++++++++++++++++ board/spacemit/bananapi_f3/Kconfig | 25 ++ board/spacemit/bananapi_f3/MAINTAINERS | 6 + board/spacemit/bananapi_f3/Makefile | 5 + board/spacemit/bananapi_f3/board.c | 9 + configs/bananapi_f3_defconfig | 20 ++ include/configs/bananapi_f3.h | 15 + 14 files changed, 573 insertions(+) create mode 100644 arch/riscv/cpu/k1/Kconfig create mode 100644 arch/riscv/cpu/k1/Makefile create mode 100644 arch/riscv/cpu/k1/cpu.c create mode 100644 arch/riscv/cpu/k1/dram.c
Quoted 8 lines
create mode 100644 arch/riscv/dts/k1-bananapi-f3.dts create mode 100644 arch/riscv/dts/k1.dtsi create mode 100644 board/spacemit/bananapi_f3/Kconfig create mode 100644 board/spacemit/bananapi_f3/MAINTAINERS create mode 100644 board/spacemit/bananapi_f3/Makefile create mode 100644 board/spacemit/bananapi_f3/board.c create mode 100644 configs/bananapi_f3_defconfig create mode 100644 include/configs/bananapi_f3.h
Hi Kongyang,
$ make bananapi_f3_defconfig && make produces the following warning.
In file included from drivers/serial/ns16550.c:13:include/ns16550.h:205:9: warning: "UART_IIR_ID" redefined
205 | #define UART_IIR_ID 0x06 /* Mask for the interrupt ID */
| ^~~~~~~~~~~
In file included from include/configs/bananapi_f3.h:10,
from include/config.h:3,
from drivers/serial/ns16550.c:8:
include/linux/serial_reg.h:33:9: note: this is the location of the previous definition
33 | #define UART_IIR_ID 0x0e /* Mask for the interrupt ID */
| ^~~~~~~~~~~There seems to be Macro redefinition.
Could you please take a look?
Best regards,
Leo
Quoted 47 lines
configs/bananapi_f3_defconfig new file +20
-0@@ -0,0 +1,20 @@ +CONFIG_RISCV=y +CONFIG_SYS_MALLOC_LEN=0x1000000 +CONFIG_NR_DRAM_BANKS=2 +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x1000000 +CONFIG_DEFAULT_DEVICE_TREE="k1-bananapi-f3" +CONFIG_SYS_LOAD_ADDR=0x200000 +CONFIG_TARGET_BANANAPI_F3=y +CONFIG_ARCH_RV64I=y +CONFIG_RISCV_SMODE=y +CONFIG_FIT=y +CONFIG_SYS_BOOTM_LEN=0xa000000 +CONFIG_SUPPORT_RAW_INITRD=y +CONFIG_OF_BOARD_SETUP=y +CONFIG_SYS_CBSIZE=256 +CONFIG_SYS_PBSIZE=276 +CONFIG_HUSH_PARSER=y +CONFIG_ENV_OVERWRITE=y +CONFIG_SYS_NS16550=y +CONFIG_SYS_NS16550_MEM32=yinclude/configs/bananapi_f3.h new file +15
-0@@ -0,0 +1,15 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ +/* +* Copyright (c) 2024, Kongyang Liu <[email protected]> +* +*/ + +#ifndef __CONFIG_H +#define __CONFIG_H + +#include <linux/serial_reg.h> + +#define CFG_SYS_SDRAM_BASE 0x0 +#define CFG_SYS_NS16550_IER UART_IER_UUE + +#endif /* __CONFIG_H */
Re: [PATCH v2 1/2] riscv: spacemit: bananapi_f3: initial support added
In reply to Kongyang LiuQuoted 55 lines · Kongyang Liu
Add basic support for SpacemiT's Banana Pi F3 board
Signed-off-by Kongyang Liu <[email protected]>---
Changes in v2:
- Change license to GPL-2.0-or-later
- Add memory node for dts
- Addft_board_setupfunction for kernel memory init
- Use default promptarch/riscv/Kconfig | 5 + arch/riscv/cpu/k1/Kconfig | 18 ++ arch/riscv/cpu/k1/Makefile | 6 + arch/riscv/cpu/k1/cpu.c | 9 + arch/riscv/cpu/k1/dram.c | 54 ++++ arch/riscv/dts/Makefile | 1 + arch/riscv/dts/k1-bananapi-f3.dts | 25 ++ arch/riscv/dts/k1.dtsi | 375 +++++++++++++++++++++++++ board/spacemit/bananapi_f3/Kconfig | 25 ++ board/spacemit/bananapi_f3/MAINTAINERS | 6 + board/spacemit/bananapi_f3/Makefile | 5 + board/spacemit/bananapi_f3/board.c | 9 + configs/bananapi_f3_defconfig | 20 ++ include/configs/bananapi_f3.h | 15 +
14 files changed, 573 insertions(+)create mode 100644
arch/riscv/cpu/k1/Kconfigcreate mode 100644arch/riscv/cpu/k1/Makefilecreate mode 100644arch/riscv/cpu/k1/cpu.ccreate mode 100644arch/riscv/cpu/k1/dram.ccreate mode 100644arch/riscv/dts/k1-bananapi-f3.dtscreate mode 100644arch/riscv/dts/k1.dtsi
create mode 100644 board/spacemit/bananapi_f3/Kconfig create mode 100644 board/spacemit/bananapi_f3/MAINTAINERS create mode 100644 board/spacemit/bananapi_f3/Makefile create mode 100644board/spacemit/bananapi_f3/board.ccreate mode 100644 configs/bananapi_f3_defconfig create mode 100644include/configs/bananapi_f3.harch/riscv/Kconfig +0
-0@@ -11,6 +11,9 @@ choiceconfig
TARGET_ANDES_AE350
bool "Support Andes ae350"arch/riscv/Kconfig +3
-0+config TARGET_BANANAPI_F3 + bool "Support BananaPi F3 Board" +config
TARGET_MICROCHIP_ICICLE
bool "Support Microchip PolarFire-SoC Icicle Board"arch/riscv/Kconfig +0
-0@@ -88,6 +91,7 @@ source "board/sifive/unleashed/Kconfig"
Quoted 4 lines
source "board/sifive/unmatched/Kconfig"
source "board/sipeed/maix/Kconfig"
source "board/sophgo/milkv_duo/Kconfig"
+source "board/spacemit/bananapi_f3/Kconfig"
Other Banana Pi stuff already upstream uses dash rather than underscore:
user@host:~/u-boot.git$ find doc/board/ -name '*banana*' doc/board/amlogic/bananapi-cm4io.rst doc/board/amlogic/bananapi-m2pro.rst doc/board/amlogic/bananapi-m2s.rst doc/board/amlogic/bananapi-m5.rst doc/board/spacemit/bananapi_f3.rst
Quoted 140 lines
source "board/starfive/visionfive2/Kconfig"
source "board/thead/th1520_lpi4a/Kconfig"
source "board/xilinx/mbv/Kconfig"arch/riscv/Kconfig +0
-0@@ -99,6 +103,7 @@ source "arch/riscv/cpu/fu540/Kconfig"source "
arch/riscv/cpu/fu740/Kconfig"
source "arch/riscv/cpu/generic/Kconfig"
source "arch/riscv/cpu/jh7110/Kconfig"
+source "arch/riscv/cpu/k1/Kconfig"# architecture-specific options belowarch/riscv/cpu/k1/Kconfig new file +18
-0@@ -0,0 +1,18 @@ +# SPDX-License-Identifier: GPL-2.0-or-later +# +# Copyright (C) 2024, Kongyang Liu <[email protected]> + +config SPACEMIT_K1 + bool + select BINMAN + select ARCH_EARLY_INIT_R + select SYS_CACHE_SHIFT_6 + imply CPU + imply CPU_RISCV + imply RISCV_TIMER if (RISCV_SMODE || SPL_RISCV_SMODE) + imply RISCV_ACLINT if RISCV_MMODE + imply SPL_RISCV_ACLINT if SPL_RISCV_MMODE + imply CMD_CPU + imply SPL_CPU + imply SPL_OPENSBI + imply SPL_LOAD_FITarch/riscv/cpu/k1/Makefile new file +6
-0@@ -0,0 +1,6 @@ +# SPDX-License-Identifier: GPL-2.0-or-later +# +# Copyright (c) 2024, Kongyang Liu <[email protected]> + +obj-y += dram.o +obj-y += cpu.oarch/riscv/cpu/k1/cpu.c new file +9
-0@@ -0,0 +1,9 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* +* Copyright (c) 2024, Kongyang Liu <[email protected]> +*/ + +int cleanup_before_linux (void ) +{ +return 0 ; +}arch/riscv/cpu/k1/dram.c new file +54
-0@@ -0,0 +1,54 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* +* Copyright (c) 2024, Kongyang Liu <[email protected]> +*/ + +#include <asm/global_data.h> +#include <config.h> +#include <fdt_support.h> +#include <linux/sizes.h> + +DECLARE_GLOBAL_DATA_PTR ; + +int dram_init (void ) +{ + gd->ram_base =CFG_SYS_SDRAM_BASE ; +/* TODO get ram size from ddr controller */ + gd->ram_size =SZ_4G ; +return 0 ; +} + +int dram_init_banksize (void ) +{ + gd->bd->bi_dram[0 ].start =CFG_SYS_SDRAM_BASE ; + gd->bd->bi_dram[0 ].size =min_t (phys_size_t, gd->ram_size,SZ_2G ); + +if (gd->ram_size >SZ_2G &&CONFIG_NR_DRAM_BANKS >1 ) { + gd->bd->bi_dram[1 ].start =0x100000000 ; + gd->bd->bi_dram[1 ].size = gd->ram_size -SZ_2G ; + } + +return 0 ; +} + +phys_addr_t board_get_usable_ram_top (phys_size_t total_size) +{ +if (gd->ram_size >SZ_2G ) +return SZ_2G ; + +return gd->ram_size; +} + +int ft_board_setup (void *blob,struct bd_info *bd) +{ +u64 start[CONFIG_NR_DRAM_BANKS ]; +u64 size[CONFIG_NR_DRAM_BANKS ]; +int i; + +for (i =0 ; i <CONFIG_NR_DRAM_BANKS ; i++) { + start[i] = gd->bd->bi_dram[i].start; + size[i] = gd->bd->bi_dram[i].size; + } + +return fdt_fixup_memory_banks (blob, start, size,CONFIG_NR_DRAM_BANKS ); +}arch/riscv/dts/Makefile +0
-0@@ -1,6 +1,7 @@ # SPDX-License-Identifier: GPL-2.0+
dtb-$(CONFIG_TARGET_ANDES_AE350) += ae350_32.dtb ae350_64.dtb +dtb-$(CONFIG_TARGET_BANANAPI_F3) += k1-bananapi-f3.dtb dtb-$(CONFIG_TARGET_MICROCHIP_ICICLE) += mpfs-icicle-kit.dtb dtb-$(CONFIG_TARGET_MILKV_DUO) += cv1800b-milkv-duo.dtb dtb-$(CONFIG_TARGET_QEMU_VIRT) += qemu-virt32.dtb qemu-virt64.dtbarch/riscv/dts/k1-bananapi-f3.dts new file +0
-0
arch/riscv/dts/k1-bananapi-f3.dts line 1
Quoted 1 line
arch/riscv/dts/k1-bananapi-f3.dts new file +1
-0@@ -0,0 +1,25 @@ +// SPDX-License-Identifier: GPL-2.0 OR MIT
Usually device tree sources use: GPL-2.0-or-later OR MIT
Quoted 30 lines
arch/riscv/dts/k1-bananapi-f3.dts new file +24
-0+/* + * Copyright (C) 2024 Yangyu Chen <[email protected]> + */ + +#include "k1.dtsi" +#include "binman.dtsi" + +/ { + model = "Banana Pi BPI-F3"; + compatible = "bananapi,bpi-f3", "spacemit,k1"; + + chosen { + stdout-path = "serial0"; + }; + + memory@0 { + device_type = "memory"; + reg = <0x00000000 0x00000000 0x00000000 0x80000000>; + }; +}; + +&uart0 { + status = "okay"; +};arch/riscv/dts/k1.dtsi new file +0
-0
arch/riscv/dts/k1.dtsi line 1
Quoted 1 line
arch/riscv/dts/k1.dtsi new file +1
-0@@ -0,0 +1,375 @@ +// SPDX-License-Identifier: GPL-2.0 OR MIT
Ditto.
Quoted 4 lines
arch/riscv/dts/k1.dtsi new file +4
-0+/* + * Copyright (C) 2024 Yangyu Chen <[email protected]> + */ +
arch/riscv/dts/k1.dtsi line 15
Quoted 10 lines
arch/riscv/dts/k1.dtsi new file +10
-0+/dts-v1/; +/ { + #address-cells = <2>; + #size-cells = <2>; + model = "SpacemiT K1"; + compatible = "spacemit,k1"; + + aliases { + serial0 = &uart0; + serial1 = &uart2;
Intentional to skip uart1?
board/spacemit/bananapi_f3/Kconfig
Quoted 377 lines
arch/riscv/dts/k1.dtsi new file +51
-0+ serial2 = &uart3; + serial3 = &uart4; + serial4 = &uart5; + serial5 = &uart6; + serial6 = &uart7; + serial7 = &uart8; + serial8 = &uart9; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + timebase-frequency = <24000000>; + + cpu-map { + cluster0 { + core0 { + cpu = <&cpu_0>; + }; + core1 { + cpu = <&cpu_1>; + }; + core2 { + cpu = <&cpu_2>; + }; + core3 { + cpu = <&cpu_3>; + }; + }; + + cluster1 { + core0 { + cpu = <&cpu_4>; + }; + core1 { + cpu = <&cpu_5>; + }; + core2 { + cpu = <&cpu_6>; + }; + core3 { + cpu = <&cpu_7>; + }; + }; + }; + + cpu_0: cpu@0 { + compatible = "spacemit,x60", "riscv"; + device_type = "cpu"; + reg = <0>; + riscv,isa ="
rv64imafdcv_zicbom_zicbop_zicboz_zicntr_zicond_zicsr_zifencei_zihintpause_zihpm_zfh_zba_zbb_zbc_zbs_zkt_zvfh_zvkt_sscofpmf_sstc_svinval_svnapot_svpbmt";arch/riscv/dts/k1.dtsi new file +23
-0+ riscv,isa-base = "rv64i"; + riscv,isa-extensions = "i", "m", "a", "f", "d", "c", "v", "zicbom", + "zicbop", "zicboz", "zicntr", "zicond", "zicsr", + "zifencei", "zihintpause", "zihpm", "zfh", "zba", + "zbb", "zbc", "zbs", "zkt", "zvfh", "zvkt", + "sscofpmf", "sstc", "svinval", "svnapot", "svpbmt"; + riscv,cbom-block-size = <64>; + riscv,cbop-block-size = <64>; + riscv,cboz-block-size = <64>; + mmu-type = "riscv,sv39"; + + cpu0_intc: interrupt-controller { + compatible = "riscv,cpu-intc"; + interrupt-controller; + #interrupt-cells = <1>; + }; + }; + + cpu_1: cpu@1 { + compatible = "spacemit,x60", "riscv"; + device_type = "cpu"; + reg = <1>; + riscv,isa ="
rv64imafdcv_zicbom_zicbop_zicboz_zicntr_zicond_zicsr_zifencei_zihintpause_zihpm_zfh_zba_zbb_zbc_zbs_zkt_zvfh_zvkt_sscofpmf_sstc_svinval_svnapot_svpbmt";arch/riscv/dts/k1.dtsi new file +23
-0+ riscv,isa-base = "rv64i"; + riscv,isa-extensions = "i", "m", "a", "f", "d", "c", "v", "zicbom", + "zicbop", "zicboz", "zicntr", "zicond", "zicsr", + "zifencei", "zihintpause", "zihpm", "zfh", "zba", + "zbb", "zbc", "zbs", "zkt", "zvfh", "zvkt", + "sscofpmf", "sstc", "svinval", "svnapot", "svpbmt"; + riscv,cbom-block-size = <64>; + riscv,cbop-block-size = <64>; + riscv,cboz-block-size = <64>; + mmu-type = "riscv,sv39"; + + cpu1_intc: interrupt-controller { + compatible = "riscv,cpu-intc"; + interrupt-controller; + #interrupt-cells = <1>; + }; + }; + + cpu_2: cpu@2 { + compatible = "spacemit,x60", "riscv"; + device_type = "cpu"; + reg = <2>; + riscv,isa ="
rv64imafdcv_zicbom_zicbop_zicboz_zicntr_zicond_zicsr_zifencei_zihintpause_zihpm_zfh_zba_zbb_zbc_zbs_zkt_zvfh_zvkt_sscofpmf_sstc_svinval_svnapot_svpbmt";arch/riscv/dts/k1.dtsi new file +23
-0+ riscv,isa-base = "rv64i"; + riscv,isa-extensions = "i", "m", "a", "f", "d", "c", "v", "zicbom", + "zicbop", "zicboz", "zicntr", "zicond", "zicsr", + "zifencei", "zihintpause", "zihpm", "zfh", "zba", + "zbb", "zbc", "zbs", "zkt", "zvfh", "zvkt", + "sscofpmf", "sstc", "svinval", "svnapot", "svpbmt"; + riscv,cbom-block-size = <64>; + riscv,cbop-block-size = <64>; + riscv,cboz-block-size = <64>; + mmu-type = "riscv,sv39"; + + cpu2_intc: interrupt-controller { + compatible = "riscv,cpu-intc"; + interrupt-controller; + #interrupt-cells = <1>; + }; + }; + + cpu_3: cpu@3 { + compatible = "spacemit,x60", "riscv"; + device_type = "cpu"; + reg = <3>; + riscv,isa ="
rv64imafdcv_zicbom_zicbop_zicboz_zicntr_zicond_zicsr_zifencei_zihintpause_zihpm_zfh_zba_zbb_zbc_zbs_zkt_zvfh_zvkt_sscofpmf_sstc_svinval_svnapot_svpbmt";arch/riscv/dts/k1.dtsi new file +23
-0+ riscv,isa-base = "rv64i"; + riscv,isa-extensions = "i", "m", "a", "f", "d", "c", "v", "zicbom", + "zicbop", "zicboz", "zicntr", "zicond", "zicsr", + "zifencei", "zihintpause", "zihpm", "zfh", "zba", + "zbb", "zbc", "zbs", "zkt", "zvfh", "zvkt", + "sscofpmf", "sstc", "svinval", "svnapot", "svpbmt"; + riscv,cbom-block-size = <64>; + riscv,cbop-block-size = <64>; + riscv,cboz-block-size = <64>; + mmu-type = "riscv,sv39"; + + cpu3_intc: interrupt-controller { + compatible = "riscv,cpu-intc"; + interrupt-controller; + #interrupt-cells = <1>; + }; + }; + + cpu_4: cpu@4 { + compatible = "spacemit,x60", "riscv"; + device_type = "cpu"; + reg = <4>; + riscv,isa ="
rv64imafdcv_zicbom_zicbop_zicboz_zicntr_zicond_zicsr_zifencei_zihintpause_zihpm_zfh_zba_zbb_zbc_zbs_zkt_zvfh_zvkt_sscofpmf_sstc_svinval_svnapot_svpbmt";arch/riscv/dts/k1.dtsi new file +23
-0+ riscv,isa-base = "rv64i"; + riscv,isa-extensions = "i", "m", "a", "f", "d", "c", "v", "zicbom", + "zicbop", "zicboz", "zicntr", "zicond", "zicsr", + "zifencei", "zihintpause", "zihpm", "zfh", "zba", + "zbb", "zbc", "zbs", "zkt", "zvfh", "zvkt", + "sscofpmf", "sstc", "svinval", "svnapot", "svpbmt"; + riscv,cbom-block-size = <64>; + riscv,cbop-block-size = <64>; + riscv,cboz-block-size = <64>; + mmu-type = "riscv,sv39"; + + cpu4_intc: interrupt-controller { + compatible = "riscv,cpu-intc"; + interrupt-controller; + #interrupt-cells = <1>; + }; + }; + + cpu_5: cpu@5 { + compatible = "spacemit,x60", "riscv"; + device_type = "cpu"; + reg = <5>; + riscv,isa ="
rv64imafdcv_zicbom_zicbop_zicboz_zicntr_zicond_zicsr_zifencei_zihintpause_zihpm_zfh_zba_zbb_zbc_zbs_zkt_zvfh_zvkt_sscofpmf_sstc_svinval_svnapot_svpbmt";arch/riscv/dts/k1.dtsi new file +23
-0+ riscv,isa-base = "rv64i"; + riscv,isa-extensions = "i", "m", "a", "f", "d", "c", "v", "zicbom", + "zicbop", "zicboz", "zicntr", "zicond", "zicsr", + "zifencei", "zihintpause", "zihpm", "zfh", "zba", + "zbb", "zbc", "zbs", "zkt", "zvfh", "zvkt", + "sscofpmf", "sstc", "svinval", "svnapot", "svpbmt"; + riscv,cbom-block-size = <64>; + riscv,cbop-block-size = <64>; + riscv,cboz-block-size = <64>; + mmu-type = "riscv,sv39"; + + cpu5_intc: interrupt-controller { + compatible = "riscv,cpu-intc"; + interrupt-controller; + #interrupt-cells = <1>; + }; + }; + + cpu_6: cpu@6 { + compatible = "spacemit,x60", "riscv"; + device_type = "cpu"; + reg = <6>; + riscv,isa ="
rv64imafdcv_zicbom_zicbop_zicboz_zicntr_zicond_zicsr_zifencei_zihintpause_zihpm_zfh_zba_zbb_zbc_zbs_zkt_zvfh_zvkt_sscofpmf_sstc_svinval_svnapot_svpbmt";arch/riscv/dts/k1.dtsi new file +23
-0+ riscv,isa-base = "rv64i"; + riscv,isa-extensions = "i", "m", "a", "f", "d", "c", "v", "zicbom", + "zicbop", "zicboz", "zicntr", "zicond", "zicsr", + "zifencei", "zihintpause", "zihpm", "zfh", "zba", + "zbb", "zbc", "zbs", "zkt", "zvfh", "zvkt", + "sscofpmf", "sstc", "svinval", "svnapot", "svpbmt"; + riscv,cbom-block-size = <64>; + riscv,cbop-block-size = <64>; + riscv,cboz-block-size = <64>; + mmu-type = "riscv,sv39"; + + cpu6_intc: interrupt-controller { + compatible = "riscv,cpu-intc"; + interrupt-controller; + #interrupt-cells = <1>; + }; + }; + + cpu_7: cpu@7 { + compatible = "spacemit,x60", "riscv"; + device_type = "cpu"; + reg = <7>; + riscv,isa ="
rv64imafdcv_zicbom_zicbop_zicboz_zicntr_zicond_zicsr_zifencei_zihintpause_zihpm_zfh_zba_zbb_zbc_zbs_zkt_zvfh_zvkt_sscofpmf_sstc_svinval_svnapot_svpbmt";arch/riscv/dts/k1.dtsi new file +148
-0+ riscv,isa-base = "rv64i"; + riscv,isa-extensions = "i", "m", "a", "f", "d", "c", "v", "zicbom", + "zicbop", "zicboz", "zicntr", "zicond", "zicsr", + "zifencei", "zihintpause", "zihpm", "zfh", "zba", + "zbb", "zbc", "zbs", "zkt", "zvfh", "zvkt", + "sscofpmf", "sstc", "svinval", "svnapot", "svpbmt"; + riscv,cbom-block-size = <64>; + riscv,cbop-block-size = <64>; + riscv,cboz-block-size = <64>; + mmu-type = "riscv,sv39"; + + cpu7_intc: interrupt-controller { + compatible = "riscv,cpu-intc"; + interrupt-controller; + #interrupt-cells = <1>; + }; + }; + }; + + soc { + compatible = "simple-bus"; + interrupt-parent = <&plic>; + #address-cells = <2>; + #size-cells = <2>; + dma-noncoherent; + ranges; + + uart0: serial@d4017000 { + compatible = "spacemit,k1-uart", "snps,dw-apb-uart"; + reg = <0x0 0xd4017000 0x0 0x100>; + interrupts = <42>; + clock-frequency = <14857000>; + reg-shift = <2>; + reg-io-width = <4>; + status = "disabled"; + }; + + uart2: serial@d4017100 { + compatible = "spacemit,k1-uart", "snps,dw-apb-uart"; + reg = <0x0 0xd4017100 0x0 0x100>; + interrupts = <44>; + clock-frequency = <14857000>; + reg-shift = <2>; + reg-io-width = <4>; + status = "disabled"; + }; + + uart3: serial@d4017200 { + compatible = "spacemit,k1-uart", "snps,dw-apb-uart"; + reg = <0x0 0xd4017200 0x0 0x100>; + interrupts = <45>; + clock-frequency = <14857000>; + reg-shift = <2>; + reg-io-width = <4>; + status = "disabled"; + }; + + uart4: serial@d4017300 { + compatible = "spacemit,k1-uart", "snps,dw-apb-uart"; + reg = <0x0 0xd4017300 0x0 0x100>; + interrupts = <46>; + clock-frequency = <14857000>; + reg-shift = <2>; + reg-io-width = <4>; + status = "disabled"; + }; + + uart5: serial@d4017400 { + compatible = "spacemit,k1-uart", "snps,dw-apb-uart"; + reg = <0x0 0xd4017400 0x0 0x100>; + interrupts = <47>; + clock-frequency = <14857000>; + reg-shift = <2>; + reg-io-width = <4>; + status = "disabled"; + }; + + uart6: serial@d4017500 { + compatible = "spacemit,k1-uart", "snps,dw-apb-uart"; + reg = <0x0 0xd4017500 0x0 0x100>; + interrupts = <48>; + clock-frequency = <14857000>; + reg-shift = <2>; + reg-io-width = <4>; + status = "disabled"; + }; + + uart7: serial@d4017600 { + compatible = "spacemit,k1-uart", "snps,dw-apb-uart"; + reg = <0x0 0xd4017600 0x0 0x100>; + interrupts = <49>; + clock-frequency = <14857000>; + reg-shift = <2>; + reg-io-width = <4>; + status = "disabled"; + }; + + uart8: serial@d4017700 { + compatible = "spacemit,k1-uart", "snps,dw-apb-uart"; + reg = <0x0 0xd4017700 0x0 0x100>; + interrupts = <50>; + clock-frequency = <14857000>; + reg-shift = <2>; + reg-io-width = <4>; + status = "disabled"; + }; + + uart9: serial@d4017800 { + compatible = "spacemit,k1-uart", "snps,dw-apb-uart"; + reg = <0x0 0xd4017800 0x0 0x100>; + interrupts = <51>; + clock-frequency = <14857000>; + reg-shift = <2>; + reg-io-width = <4>; + status = "disabled"; + }; + + plic: interrupt-controller@e0000000 { + compatible = "spacemit,k1-plic", "sifive,plic-1.0.0"; + reg = <0x0 0xe0000000 0x0 0x4000000>; + interrupts-extended = <&cpu0_intc 11>, <&cpu0_intc 9>, + <&cpu1_intc 11>, <&cpu1_intc 9>, + <&cpu2_intc 11>, <&cpu2_intc 9>, + <&cpu3_intc 11>, <&cpu3_intc 9>, + <&cpu4_intc 11>, <&cpu4_intc 9>, + <&cpu5_intc 11>, <&cpu5_intc 9>, + <&cpu6_intc 11>, <&cpu6_intc 9>, + <&cpu7_intc 11>, <&cpu7_intc 9>; + interrupt-controller; + #address-cells = <0>; + #interrupt-cells = <1>; + riscv,ndev = <159>; + }; + + clint: timer@e4000000 { + compatible = "spacemit,k1-clint", "sifive,clint0"; + reg = <0x0 0xe4000000 0x0 0x10000>; + interrupts-extended = <&cpu0_intc 3>, <&cpu0_intc 7>, + <&cpu1_intc 3>, <&cpu1_intc 7>, + <&cpu2_intc 3>, <&cpu2_intc 7>, + <&cpu3_intc 3>, <&cpu3_intc 7>, + <&cpu4_intc 3>, <&cpu4_intc 7>, + <&cpu5_intc 3>, <&cpu5_intc 7>, + <&cpu6_intc 3>, <&cpu6_intc 7>, + <&cpu7_intc 3>, <&cpu7_intc 7>; + }; + }; +};board/spacemit/bananapi_f3/Kconfig +0
-0
Ditto with the underscore vs. dash in the file resp. folder name.
configs/bananapi_f3_defconfig
Quoted 69 lines
new file mode 100644
index 0000000000..0082a0d2afboard/spacemit/bananapi_f3/Kconfig new file +25
-0@@ -0,0 +1,25 @@ +if TARGET_BANANAPI_F3 + +config SYS_BOARD + default "bananapi_f3" + +config SYS_VENDOR + default "spacemit" + +config SYS_CPU + default "k1" + +config SYS_CONFIG_NAME + default "bananapi_f3" + +config TEXT_BASE + default 0x00200000 + +config SPL_OPENSBI_LOAD_ADDR + default 0x00000000 + +config BOARD_SPECIFIC_OPTIONS + def_bool y + select SPACEMIT_K1 + +endifboard/spacemit/bananapi_f3/MAINTAINERS new file +6
-0@@ -0,0 +1,6 @@ +BananaPi F3 +M: Kongyang Liu <[email protected]> +S: Maintained +F: board/spacemit/bananapi_f3/ +F: configs/bananapi_f3_defconfig +F: doc/board/spacemit/bananapi_f3.rstboard/spacemit/bananapi_f3/Makefile new file +5
-0@@ -0,0 +1,5 @@ +# SPDX-License-Identifier: GPL-2.0-or-later +# +# Copyright (c) 2024, Kongyang Liu <[email protected]> + +obj-y := board.oboard/spacemit/bananapi_f3/board.c new file +9
-0@@ -0,0 +1,9 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* +* Copyright (c) 2024, Kongyang Liu <[email protected]> +*/ + +int board_init (void ) +{ +return 0 ; +}configs/bananapi_f3_defconfig +0
-0
do.
include/configs/bananapi_f3.h
Quoted 26 lines
new file mode 100644
index 0000000000..6363620208configs/bananapi_f3_defconfig new file +20
-0@@ -0,0 +1,20 @@ +CONFIG_RISCV=y +CONFIG_SYS_MALLOC_LEN=0x1000000 +CONFIG_NR_DRAM_BANKS=2 +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x1000000 +CONFIG_DEFAULT_DEVICE_TREE="k1-bananapi-f3" +CONFIG_SYS_LOAD_ADDR=0x200000 +CONFIG_TARGET_BANANAPI_F3=y +CONFIG_ARCH_RV64I=y +CONFIG_RISCV_SMODE=y +CONFIG_FIT=y +CONFIG_SYS_BOOTM_LEN=0xa000000 +CONFIG_SUPPORT_RAW_INITRD=y +CONFIG_OF_BOARD_SETUP=y +CONFIG_SYS_CBSIZE=256 +CONFIG_SYS_PBSIZE=276 +CONFIG_HUSH_PARSER=y +CONFIG_ENV_OVERWRITE=y +CONFIG_SYS_NS16550=y +CONFIG_SYS_NS16550_MEM32=yinclude/configs/bananapi_f3.h +0
-0
do.
Quoted 20 lines
new file mode 100644
index 0000000000..723bbaab69include/configs/bananapi_f3.h new file +15
-0@@ -0,0 +1,15 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ +/* +* Copyright (c) 2024, Kongyang Liu <[email protected]> +* +*/ + +#ifndef __CONFIG_H +#define __CONFIG_H + +#include <linux/serial_reg.h> + +#define CFG_SYS_SDRAM_BASE 0x0 +#define CFG_SYS_NS16550_IER UART_IER_UUE + +#endif /* __CONFIG_H */
PATCH v2 2/2 doc: spacemit: bananapi_f3: document Banana Pi F3 board
In reply to Kongyang LiuAdd document for Banana Pi F3 board which based on SpacemiT's K1 SoC.
---
(no changes since v1)
doc/board/index.rst | 1 + doc/board/spacemit/bananapi_f3.rst | 78 ++++++++++++++++++++++++++++++ doc/board/spacemit/index.rst | 8 +++ 3 files changed, 87 insertions(+) create mode 100644 doc/board/spacemit/bananapi_f3.rst create mode 100644 doc/board/spacemit/index.rst
doc/board/index.rst +1 -0
@@ -51,6 +51,7 @@ Board-specific doc sipeed/index socionext/index sophgo/index + spacemit/index st/index starfive/index ste/index
doc/board/spacemit/bananapi_f3.rst new file +78 -0
78 lines not on this page · raw message
doc/board/spacemit/index.rst new file +8 -0
@@ -0,0 +1,8 @@ +.. SPDX-License-Identifier: GPL-2.0-or-later + +SpacemiT +======== +.. toctree:: + :maxdepth: 1 + + bananapi_f3
Signature · 1 line
2.41.0
Re: [PATCH v2 2/2] doc: spacemit: bananapi_f3: document Banana Pi F3 board
Quoted 5 lines · Kongyang Liu
Add document for Banana Pi F3 board which based on SpacemiT's K1 SoC.
Signed-off-by Kongyang Liu <[email protected]>---
Quoted 8 lines
(no changes since v1)
doc/board/index.rst | 1 + doc/board/spacemit/bananapi_f3.rst | 78 ++++++++++++++++++++++++++++++ doc/board/spacemit/index.rst | 8 +++ 3 files changed, 87 insertions(+) create mode 100644 doc/board/spacemit/bananapi_f3.rst create mode 100644 doc/board/spacemit/index.rst
Re: [PATCH v2 2/2] doc: spacemit: bananapi_f3: document Banana Pi F3 board
In reply to Kongyang LiuQuoted 32 lines · Kongyang Liu
Add document for Banana Pi F3 board which based on SpacemiT's K1 SoC.
Signed-off-by Kongyang Liu <[email protected]>---
(no changes since v1)
doc/board/index.rst | 1 +
doc/board/spacemit/bananapi_f3.rst| 78 ++++++++++++++++++++++++++++++ doc/board/spacemit/index.rst | 8 +++3 files changed, 87 insertions(+)create mode 100644
doc/board/spacemit/bananapi_f3.rstcreate mode 100644doc/board/spacemit/index.rstdoc/board/index.rst +0
-0@@ -51,6 +51,7 @@ Board-specific docsipeed/index
socionext/index
sophgo/index
+ spacemit/index
st/index
starfive/index
ste/indexdoc/board/spacemit/bananapi_f3.rst new file +0
-0
doc/board/spacemit/bananapi_f3.rst line 10
Quoted 10 lines
doc/board/spacemit/bananapi_f3.rst new file +10
-0@@ -0,0 +1,78 @@ +.. SPDX-License-Identifier: GPL-2.0-or-later + +Banana Pi F3 +============ + +About This +---------- +Banana Pi F3 board is a industrial grade RISC-V development board, it +design with SpacemiT K1 8 core RISC-V chip, CPU integrates 2.0 TOPs AI +computing power. 4G DDR and 16G eMMC onboard.2x GbE Ethernet prot, 4x USB
do. missing space before 2x and port rather than prot
Quoted 26 lines
doc/board/spacemit/bananapi_f3.rst new file +26
-0+3.0 and PCIe for M.2 interface, support HDMI and Dual MIPI-CSI Camera. + +Building +~~~~~~~~ +1. Add the RISC-V toolchain to your PATH. +2. Setup ARCH & cross compilation environment variable: + +.. code-block:: console + + export CROSS_COMPILE=<riscv64 toolchain prefix> + +3. Before building U-Boot, OpenSBI should be built first. OpenSBI can be +built for SpacemiT K1 SoC as below: + +.. code-block:: console + + git clone https://github.com/cyyself/opensbi -b k1-opensbi + cd opensbi + make PLATFORM=generic + +4. Then build U-Boot as following: + +.. code-block:: console + + cd <U-Boot-dir> + make bananapi_f3_defconfig
doc/board/spacemit/bananapi_f3.rst line 46
Quoted 10 lines
doc/board/spacemit/bananapi_f3.rst new file +10
-0+ make OPENSBI=<OpenSBI-dir>/build/platform/generic/firmware/fw_dynamic.bin + +This will generate u-boot.itb + +Booting +~~~~~~~ +Currently, we use a modified vendor's U-Boot SPL to load a FIT image that +includes OpenSBI and U-Boot. Fully describing how to boot into U-Boot is a +challenging task. And the booting method will be added after the SPL +support is available.
Hm, would be great if one could at least test it somehow on real hardware. We do have boards available BTW (;- p).
Quoted 38 lines
doc/board/spacemit/bananapi_f3.rst new file +32
-0+ +Sample boot log from Banana Pi F3 board +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +.. code-block:: none + + U-Boot 2024.07-00686-g608f2d51760c (Jul 08 2024 - 14:53:51 +0800) + + DRAM: 4 GiB + Core: 18 devices, 7 uclasses, devicetree: separate + Loading Environment from nowhere... OK + In: serial@d4017000 + Out: serial@d4017000 + Err: serial@d4017000 + Net: No ethernet found. + bananapi_f3# cpu detail + 0: cpu@0 spacemit,x60 + ID = 0, freq = 0 Hz: MMU + 1: cpu@1 spacemit,x60 + ID = 1, freq = 0 Hz: MMU + 2: cpu@2 spacemit,x60 + ID = 2, freq = 0 Hz: MMU + 3: cpu@3 spacemit,x60 + ID = 3, freq = 0 Hz: MMU + 4: cpu@4 spacemit,x60 + ID = 4, freq = 0 Hz: MMU + 5: cpu@5 spacemit,x60 + ID = 5, freq = 0 Hz: MMU + 6: cpu@6 spacemit,x60 + ID = 6, freq = 0 Hz: MMU + 7: cpu@7 spacemit,x60 + ID = 7, freq = 0 Hz: MMU + bananapi_f3#doc/board/spacemit/index.rst new file +0
-0
doc/board/spacemit/index.rst line 8
Quoted 8 lines
doc/board/spacemit/index.rst new file +8
-0@@ -0,0 +1,8 @@ +.. SPDX-License-Identifier: GPL-2.0-or-later + +SpacemiT +======== +.. toctree:: + :maxdepth: 1 + + bananapi_f3
do.
Quoted 3 lines · Kongyang Liu
Banana Pi F3 board is a industrial grade RISC-V development board, it design with SpacemiT K1 8 core RISC-V chip, CPU integrates 2.0 TOPs AI computing power. 4G DDR and 16G eMMC onboard.2x GbE Ethernet prot, 4x USB
missing space before 2x and port rather than prot
Quoted 48 lines
3.0 and PCIe for M.2 interface, support HDMI and Dual MIPI-CSI Camera.
This patch introduces fundamental support for the Banana Pi F3 board, encompassing UART, CPU, and PLIC support. This ensures that U-Boot can operate in serial console mode.
Changes in v2:
- Change license to GPL-2.0-or-later
- Add memory node for dts
- Addft_board_setupfunction for kernel memory init
- Use default promptKongyang Liu (2):
riscv: spacemit:bananapi_f3: initial support added
doc: spacemit:bananapi_f3: document Banana Pi F3 boardarch/riscv/Kconfig | 5 + arch/riscv/cpu/k1/Kconfig | 18 ++ arch/riscv/cpu/k1/Makefile | 6 + arch/riscv/cpu/k1/cpu.c | 9 + arch/riscv/cpu/k1/dram.c | 54 ++++ arch/riscv/dts/Makefile | 1 + arch/riscv/dts/k1-bananapi-f3.dts | 25 ++ arch/riscv/dts/k1.dtsi | 375 +++++++++++++++++++++++++ board/spacemit/bananapi_f3/Kconfig | 25 ++ board/spacemit/bananapi_f3/MAINTAINERS | 6 + board/spacemit/bananapi_f3/Makefile | 5 + board/spacemit/bananapi_f3/board.c | 9 + configs/bananapi_f3_defconfig | 20 ++ doc/board/index.rst | 1 + doc/board/spacemit/bananapi_f3.rst | 78 +++++ doc/board/spacemit/index.rst | 8 + include/configs/bananapi_f3.h | 15 +
17 files changed, 660 insertions(+)create mode 100644
arch/riscv/cpu/k1/Kconfigcreate mode 100644arch/riscv/cpu/k1/Makefilecreate mode 100644arch/riscv/cpu/k1/cpu.ccreate mode 100644arch/riscv/cpu/k1/dram.ccreate mode 100644arch/riscv/dts/k1-bananapi-f3.dtscreate mode 100644arch/riscv/dts/k1.dtsi
create mode 100644 board/spacemit/bananapi_f3/Kconfig create mode 100644 board/spacemit/bananapi_f3/MAINTAINERS create mode 100644 board/spacemit/bananapi_f3/Makefile create mode 100644board/spacemit/bananapi_f3/board.ccreate mode 100644 configs/bananapi_f3_defconfig create mode 100644doc/board/spacemit/bananapi_f3.rstcreate mode 100644doc/board/spacemit/index.rstcreate mode 100644include/configs/bananapi_f3.h