vdpa: support set mac address from vdpa tool
Subsystems (4)
v8 cover vdpa: support set mac address from vdpa tool
Add support for setting the MAC address using the VDPA tool. This feature will allow setting the MAC address using the VDPA tool. For example, in vdpa_sim_net, the implementation sets the MAC address to the config space. However, for other drivers, they can implement their own function, not limited to the config space.
Changelog v2
- Changed the function name to prevent misunderstanding
- Added check for blk device
- Addressed the comments
Changelog v3
- Split the function of the net device from vdpa_nl_cmd_dev_attr_set_doit
- Add a lock for the network device's dev_set_attr operation
- Address the comments
Changelog v4
- Address the comments
- Add a lock for the vdap_sim?_net device's dev_set_attr operation
Changelog v5
- Address the comments
Changelog v6
- Replace all the memcpy of mac address with ether_addr_copy()
- Remove the check for VIRTIO_NET_F_MAC in vdpa_dev_net_device_attr_set
- Remove unnecessary check
- Enhance the error log
Changelog v7
- change the code to reverse-xmas tree style
- make all patches pass the check of ./scripts/checkpatch.pl --strict
- Address other comments
Changelog v8
- Change the fail return value to -EOPNOTSUPP
- Improve the error log
- remove the unnecessary memcpy
Cindy Lu (3):
vdpa: support set mac address from vdpa tool
vdpa_sim_net: Add the support of set mac address vdpa/mlx5: Add the support of set mac address
drivers/vdpa/mlx5/net/mlx5_vnet.c | 28 ++++++++++ drivers/vdpa/vdpa.c | 79 ++++++++++++++++++++++++++++ drivers/vdpa/vdpa_sim/vdpa_sim_net.c | 21 +++++++- include/linux/vdpa.h | 9 ++++ include/uapi/linux/vdpa.h | 1 + 5 files changed, 137 insertions(+), 1 deletion(-)
Signature · 1 line
2.45.0
PATCH v8 1/3 vdpa: support set mac address from vdpa tool
Add new UAPI to support the mac address from vdpa tool Function vdpa_nl_cmd_dev_attr_set_doit() will get the new MAC address from the vdpa tool and then set it to the device.
The usage is: vdpa dev set name vdpa_name mac **:**:**:**:**:**
Here is example:
root@L1# vdpa -jp dev config show vdpa0
{
"config": {
"vdpa0": {
"mac": "82:4d:e9:5d:d7:e6",
"link ": "up",
"link_announce ": false,
"mtu": 1500
}
}
}root@L1# vdpa dev set name vdpa0 mac 00:11:22:33:44:55
root@L1# vdpa -jp dev config show vdpa0
{
"config": {
"vdpa0": {
"mac": "00:11:22:33:44:55",
"link ": "up",
"link_announce ": false,
"mtu": 1500
}
}
}--- drivers/vdpa/vdpa.c | 79 +++++++++++++++++++++++++++++++++++++++ include/linux/vdpa.h | 9 +++++ include/uapi/linux/vdpa.h | 1 + 3 files changed, 89 insertions(+)
drivers/vdpa/vdpa.c +79 -0
@@ -1361,6 +1361,80 @@ static int vdpa_nl_cmd_dev_config_get_doit(struct sk_buff *skb, struct genl_inforeturn err; } +static int vdpa_dev_net_device_attr_set (struct vdpa_device *vdev, +struct genl_info *info) +{ +struct vdpa_dev_set_config set_config = {}; +struct vdpa_mgmt_dev *mdev = vdev->mdev; +struct nlattr **nl_attrs = info->attrs; +const u8 *macaddr; +int err = -EOPNOTSUPP ; + +down_write (&vdev->cf_lock); +if (nl_attrs[VDPA_ATTR_DEV_NET_CFG_MACADDR ]) { + set_config.mask |=BIT_ULL (VDPA_ATTR_DEV_NET_CFG_MACADDR ); + macaddr =nla_data (nl_attrs[VDPA_ATTR_DEV_NET_CFG_MACADDR ]); + +if (is_valid_ether_addr (macaddr)) { +ether_addr_copy (set_config.net.mac, macaddr); +if (mdev->ops->dev_set_attr) { + err = mdev->ops->dev_set_attr (mdev, vdev, + &set_config); + }else { +NL_SET_ERR_MSG_FMT_MOD (info->extack, +"Operation not supported by the device." ); + } + }else { +NL_SET_ERR_MSG_FMT_MOD (info->extack, +"Invalid MAC address" ); + } + } +up_write (&vdev->cf_lock); +return err; +} + +static int vdpa_nl_cmd_dev_attr_set_doit (struct sk_buff *skb, +struct genl_info *info) +{ +struct vdpa_device *vdev; +struct device *dev; +const char *name; +u64 classes; +int err =0 ; + +if (!info->attrs[VDPA_ATTR_DEV_NAME ]) +return -EINVAL ; + + name =nla_data (info->attrs[VDPA_ATTR_DEV_NAME ]); + +down_write (&vdpa_dev_lock); + dev =bus_find_device (&vdpa_bus,NULL , name, vdpa_name_match); +if (!dev) { +NL_SET_ERR_MSG_MOD (info->extack,"device not found" ); + err = -ENODEV ; + goto dev_err; + } + vdev = container_of(dev, struct vdpa_device, dev); +if (!vdev->mdev) { +NL_SET_ERR_MSG_MOD (info->extack,"unmanaged vdpa device" ); + err = -EINVAL ; + goto mdev_err; + } + classes =vdpa_mgmtdev_get_classes (vdev->mdev,NULL ); +if (classes &BIT_ULL (VIRTIO_ID_NET )) { + err =vdpa_dev_net_device_attr_set (vdev, info); + }else { +NL_SET_ERR_MSG_FMT_MOD (info->extack,"%s device not supported" , + name); + } + +mdev_err: +put_device (dev); +dev_err: +up_write (&vdpa_dev_lock); +return err; +} +static int vdpa_dev_config_dump (struct device *dev,void *data) { struct vdpa_device *vdev = container_of(dev, struct vdpa_device, dev);
@@ -1497,6 +1571,11 @@ static const struct genl_ops vdpa_nl_ops[] = { .doit = vdpa_nl_cmd_dev_stats_get_doit, .flags = GENL_ADMIN_PERM, }, + { + .cmd = VDPA_CMD_DEV_ATTR_SET, + .doit = vdpa_nl_cmd_dev_attr_set_doit, + .flags = GENL_ADMIN_PERM, + }, };static struct genl_family vdpa_nl_family__ro_after_init = {
include/linux/vdpa.h +9 -0
@@ -582,11 +582,20 @@ void vdpa_set_status(struct vdpa_device *vdev, u8 status);* @dev: vdpa device to remove * Driver need to remove the specified device by calling * _vdpa_unregister_device(). +* @dev_set_attr: change a vdpa device's attr after it was create +* @mdev: parent device to use for device +* @dev: vdpa device structure +* @config:Attributes to be set for the device. +* The driver needs to check the mask of the structure and then set +* the related information to the vdpa device. The driver must return 0 +* if set successfully. */ struct vdpa_mgmtdev_ops {int (*dev_add)(struct vdpa_mgmt_dev *mdev,const char *name,const struct vdpa_dev_set_config *config);void (*dev_del)(struct vdpa_mgmt_dev *mdev,struct vdpa_device *dev); +int (*dev_set_attr)(struct vdpa_mgmt_dev *mdev,struct vdpa_device *dev, +const struct vdpa_dev_set_config *config); };/**
include/uapi/linux/vdpa.h +1 -0
@@ -19,6 +19,7 @@ enum vdpa_command {VDPA_CMD_DEV_GET ,/* can dump */ VDPA_CMD_DEV_CONFIG_GET ,/* can dump */ VDPA_CMD_DEV_VSTATS_GET , + VDPA_CMD_DEV_ATTR_SET, }; enum vdpa_attr {
Signature · 1 line
2.45.0
Quoted 34 lines · Cindy Lu
Add new UAPI to support the mac address from vdpa tool Function
vdpa_nl_cmd_dev_attr_set_doit()will get the new MAC address from the vdpa tool and then set it to the device.The usage is: vdpa dev set name
vdpa_namemac **:**:**:**:**:**Here is example:
root@L1# vdpa -jp dev config show vdpa0 { "config": { "vdpa0": { "mac": "82:4d:e9:5d:d7:e6", "link ": "up", "link_announce ": false, "mtu": 1500 } } }root@L1# vdpa dev set name vdpa0 mac 00:11:22:33:44:55root@L1# vdpa -jp dev config show vdpa0 { "config": { "vdpa0": { "mac": "00:11:22:33:44:55", "link ": "up", "link_announce ": false, "mtu": 1500 } } }
Quoted 2 lines
Signed-off-by Cindy Lu <[email protected]>---
Thanks
PATCH v8 2/3 vdpa_sim_net: Add the support of set mac address
In reply to Cindy LuAdd the function to support setting the MAC address. For vdpa_sim_net, the driver will write the MAC address to the config space, and other devices can implement their own functions to support this.
--- drivers/vdpa/vdpa_sim/vdpa_sim_net.c | 21 ++++++++++++++++++++- 1 file changed, 20 insertions(+), 1 deletion(-)
drivers/vdpa/vdpa_sim/vdpa_sim_net.c +20 -1
@@ -414,6 +414,24 @@ static void vdpasim_net_get_config(struct vdpasim *vdpasim, void *config) net_config->status =cpu_to_vdpasim16 (vdpasim,VIRTIO_NET_S_LINK_UP ); } +static int vdpasim_net_set_attr (struct vdpa_mgmt_dev *mdev,struct vdpa_device *dev, +const struct vdpa_dev_set_config *config) +{ + struct vdpasim *vdpasim = container_of(dev, struct vdpasim, vdpa); +struct virtio_net_config *vio_config = vdpasim->config; + +mutex_lock (&vdpasim->mutex); + +if (config->mask & (1 <<VDPA_ATTR_DEV_NET_CFG_MACADDR )) { +ether_addr_copy (vio_config->mac, config->net.mac); +mutex_unlock (&vdpasim->mutex); +return 0 ; + } + +mutex_unlock (&vdpasim->mutex); +return -EOPNOTSUPP ; +} +static void vdpasim_net_setup_config (struct vdpasim *vdpasim,const struct vdpa_dev_set_config *config) {
@@ -510,7 +528,8 @@ static void vdpasim_net_dev_del(struct vdpa_mgmt_dev *mdev,static const struct vdpa_mgmtdev_ops vdpasim_net_mgmtdev_ops = { .dev_add = vdpasim_net_dev_add, - .dev_del = vdpasim_net_dev_del + .dev_del = vdpasim_net_dev_del, + .dev_set_attr = vdpasim_net_set_attr };static struct virtio_device_id id_table[] = {
Signature · 1 line
2.45.0
Re: [PATCH v8 2/3] vdpa_sim_net: Add the support of set mac address
Quoted 8 lines · Cindy Lu
Add the function to support setting the MAC address. For
vdpa_sim_net, the driver will write the MAC address to the config space, and other devices can implement their own functions to support this.Signed-off-by Cindy Lu <[email protected]>---
Thanks
PATCH v8 3/3 vdpa/mlx5: Add the support of set mac address
In reply to Cindy LuAdd the function to support setting the MAC address. For vdpa/mlx5, the function will use mlx5_mpfs_add_mac to set the mac address
Tested in ConnectX-6 Dx device
--- drivers/vdpa/mlx5/net/mlx5_vnet.c | 28 ++++++++++++++++++++++++++++ 1 file changed, 28 insertions(+)
drivers/vdpa/mlx5/net/mlx5_vnet.c +28 -0
@@ -3786,9 +3786,37 @@ static void mlx5_vdpa_dev_del(struct vdpa_mgmt_dev *v_mdev, struct vdpa_device * mgtdev->ndev =NULL ; } +static int mlx5_vdpa_set_attr (struct vdpa_mgmt_dev *v_mdev,struct vdpa_device *dev, +const struct vdpa_dev_set_config *add_config) +{ +struct virtio_net_config *config; +struct mlx5_core_dev *pfmdev; +struct mlx5_vdpa_dev *mvdev; +struct mlx5_vdpa_net *ndev; +struct mlx5_core_dev *mdev; +int err = -EOPNOTSUPP ; + + mvdev =to_mvdev (dev); + ndev =to_mlx5_vdpa_ndev (mvdev); + mdev = mvdev->mdev; + config = &ndev->config; + +down_write (&ndev->reslock); +if (add_config->mask & (1 <<VDPA_ATTR_DEV_NET_CFG_MACADDR )) { + pfmdev =pci_get_drvdata (pci_physfn (mdev->pdev)); + err =mlx5_mpfs_add_mac (pfmdev, config->mac); +if (!err) +ether_addr_copy (config->mac, add_config->net.mac); + } + +up_write (&ndev->reslock); +return err; +} +static const struct vdpa_mgmtdev_ops mdev_ops = { .dev_add = mlx5_vdpa_dev_add, .dev_del = mlx5_vdpa_dev_del, + .dev_set_attr = mlx5_vdpa_set_attr, };static struct virtio_device_id id_table[] = {
Signature · 1 line
2.45.0
Re: [PATCH v8 3/3] vdpa/mlx5: Add the support of set mac address
Quoted 9 lines · Cindy Lu
Add the function to support setting the MAC address. For vdpa/mlx5, the function will use
mlx5_mpfs_add_macto set the mac addressTested in ConnectX-6 Dx device
Signed-off-by Cindy Lu <[email protected]>---
Thanks