dt-bindings: watchdog: convert ziirave-wdt.txt to yaml
Frank Li
maintainerPATCH v2 1/1 dt-bindings: watchdog: convert ziirave-wdt.txt to yaml
Convert ziirave-wdt.txt to yaml format.
Additional change:
- Add i2c node in example.
- Add ref to watchdog.yaml
Fix below warning:arch/arm64/boot/dts/freescale/imx8mq-zii-ultra-rmb3.dtb: /soc@0/bus@30800000/i2c@30a40000/watchdog@38:
failed to match any schema with compatible: ['zii,rave-wdt']
---
Change from v1 to v2
- add ref watchdog.yaml
- Remove timeout-sec
--- .../bindings/watchdog/zii,rave-wdt.yaml | 47 +++++++++++++++++++ .../bindings/watchdog/ziirave-wdt.txt | 19 -------- 2 files changed, 47 insertions(+), 19 deletions(-) create mode 100644 Documentation/devicetree/bindings/watchdog/zii,rave-wdt.yaml delete mode 100644 Documentation/devicetree/bindings/watchdog/ziirave-wdt.txt
Documentation/devicetree/bindings/watchdog/zii,rave-wdt.yaml new file +47 -0
@@ -0,0 +1,47 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/watchdog/zii,rave-wdt.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Zodiac RAVE Watchdog Timer + +maintainers: + - Frank Li <[email protected]> + +properties: + compatible: + const: zii,rave-wdt + + reg: + maxItems: 1 + description: i2c slave address of device, usually 0x38 + + reset-duration-ms: + description: + Duration of the pulse generated when the watchdog times + out. Value in milliseconds. + +required: + - compatible + - reg + +allOf: + - $ref: watchdog.yaml# + +unevaluatedProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + watchdog@38 { + compatible = "zii,rave-wdt"; + reg = <0x38>; + timeout-sec = <30>; + reset-duration-ms = <30>; + }; + }; +
Documentation/devicetree/bindings/watchdog/ziirave-wdt.txt deleted +0 -19
@@ -1,19 +0,0 @@ -Zodiac RAVE Watchdog Timer - -Required properties: -- compatible: must be "zii,rave-wdt" -- reg: i2c slave address of device, usually 0x38 - -Optional Properties: -- timeout-sec: Watchdog timeout value in seconds. -- reset-duration-ms: Duration of the pulse generated when the watchdog times - out. Value in milliseconds. - -Example: - - watchdog@38 { - compatible = "zii,rave-wdt"; - reg = <0x38>; - timeout-sec = <30>; - reset-duration-ms = <30>; - };
--
2.34.1
Quoted 28 lines · Frank Li
Convert ziirave-wdt.txt to yaml format.
Additional change:
- Add i2c node in example.
- Add ref towatchdog.yamlFix below warning:
arch/arm64/boot/dts/freescale/imx8mq-zii-ultra-rmb3.dtb: /soc@0/bus@30800000/i2c@30a40000/watchdog@38:
failed to match any schema with compatible: ['zii,rave-wdt']Signed-off-by Frank Li <[email protected]>---
Change from v1 to v2
- add refwatchdog.yaml
- Remove timeout-sec--- .../bindings/watchdog/zii,rave-wdt.yaml | 47 +++++++++++++++++++ .../bindings/watchdog/ziirave-wdt.txt | 19 -------- 2 files changed, 47 insertions(+), 19 deletions(-) create mode 100644 Documentation/devicetree/bindings/watchdog/zii,rave-wdt.yaml delete mode 100644 Documentation/devicetree/bindings/watchdog/ziirave-wdt.txtDocumentation/devicetree/bindings/watchdog/zii,rave-wdt.yaml new file +0
-0
Documentation/devicetree/bindings/watchdog/zii,rave-wdt.yaml line 10
Quoted 10 lines
Documentation/devicetree/bindings/watchdog/zii,rave-wdt.yaml new file +10
-0@@ -0,0 +1,47 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/watchdog/zii,rave-wdt.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Zodiac RAVE Watchdog Timer + +maintainers: + - Frank Li <[email protected]>
When you're converting bindings, listing yourself as the maintainer only really makes sense if you know/care about the hardware IMO.
Documentation/devicetree/bindings/watchdog/zii,rave-wdt.yaml line 23
Quoted 13 lines
Documentation/devicetree/bindings/watchdog/zii,rave-wdt.yaml new file +13
-0+ +properties: + compatible: + const: zii,rave-wdt + + reg: + maxItems: 1 + description: i2c slave address of device, usually 0x38 + + reset-duration-ms: + description: + Duration of the pulse generated when the watchdog times + out. Value in milliseconds.
^^^^^^^^^^^^^^^^^^^^^
This is obvious, and could have been dropped. Keep an eye out for things like that while doing conversions.
Thanks,
Conor.
Quoted 53 lines
Documentation/devicetree/bindings/watchdog/zii,rave-wdt.yaml new file +24
-0+ +required: + - compatible + - reg + +allOf: + - $ref: watchdog.yaml# + +unevaluatedProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + watchdog@38 { + compatible = "zii,rave-wdt"; + reg = <0x38>; + timeout-sec = <30>; + reset-duration-ms = <30>; + }; + }; +Documentation/devicetree/bindings/watchdog/ziirave-wdt.txt deleted +0
-20@@ -1,19 +0,0 @@ -Zodiac RAVE Watchdog Timer - -Required properties: -- compatible: must be "zii,rave-wdt" -- reg: i2c slave address of device, usually 0x38 - -Optional Properties: -- timeout-sec: Watchdog timeout value in seconds. -- reset-duration-ms: Duration of the pulse generated when the watchdog times - out. Value in milliseconds. - -Example: - - watchdog@38 { - compatible = "zii,rave-wdt"; - reg = <0x38>; - timeout-sec = <30>; - reset-duration-ms = <30>; - }; --2.34.1
Frank Li
maintainerQuoted 34 lines · Conor Dooley
Quoted 33 lines · Frank Li
Convert ziirave-wdt.txt to yaml format.
Additional change:
- Add i2c node in example.
- Add ref towatchdog.yamlFix below warning:
arch/arm64/boot/dts/freescale/imx8mq-zii-ultra-rmb3.dtb: /soc@0/bus@30800000/i2c@30a40000/watchdog@38:
failed to match any schema with compatible: ['zii,rave-wdt']Signed-off-by Frank Li <[email protected]>---
Change from v1 to v2
- add refwatchdog.yaml
- Remove timeout-sec--- .../bindings/watchdog/zii,rave-wdt.yaml | 47 +++++++++++++++++++ .../bindings/watchdog/ziirave-wdt.txt | 19 -------- 2 files changed, 47 insertions(+), 19 deletions(-) create mode 100644 Documentation/devicetree/bindings/watchdog/zii,rave-wdt.yaml delete mode 100644 Documentation/devicetree/bindings/watchdog/ziirave-wdt.txtDocumentation/devicetree/bindings/watchdog/zii,rave-wdt.yaml new file +5
-0@@ -0,0 +1,47 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/watchdog/zii,rave-wdt.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml#
Quoted 8 lines
Documentation/devicetree/bindings/watchdog/zii,rave-wdt.yaml line 10
Quoted 5 lines
Documentation/devicetree/bindings/watchdog/zii,rave-wdt.yaml new file +5
-0+ +title: Zodiac RAVE Watchdog Timer + +maintainers: + - Frank Li <[email protected]>When you're converting bindings, listing yourself as the maintainer only really makes sense if you know/care about the hardware IMO.
I faced this problem. I am not sure who I can put as maintainer. How to decide binding doc maintainer? same as driver maintainer?
Frank
Quoted 76 lines
Quoted 4 lines
Documentation/devicetree/bindings/watchdog/zii,rave-wdt.yaml new file +3
-0+ +properties: + compatible:Documentation/devicetree/bindings/watchdog/zii,rave-wdt.yaml line 23
Quoted 10 lines
Documentation/devicetree/bindings/watchdog/zii,rave-wdt.yaml new file +10
-0+ const: zii,rave-wdt + + reg: + maxItems: 1 + description: i2c slave address of device, usually 0x38 + + reset-duration-ms: + description: + Duration of the pulse generated when the watchdog times + out. Value in milliseconds.^^^^^^^^^^^^^^^^^^^^^This is obvious, and could have been dropped. Keep an eye out for things like that while doing conversions.
Reviewed-by Conor Dooley <[email protected]>Thanks,
Conor.Quoted 53 lines
Documentation/devicetree/bindings/watchdog/zii,rave-wdt.yaml new file +24
-0+ +required: + - compatible + - reg + +allOf: + - $ref: watchdog.yaml# + +unevaluatedProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + watchdog@38 { + compatible = "zii,rave-wdt"; + reg = <0x38>; + timeout-sec = <30>; + reset-duration-ms = <30>; + }; + }; +Documentation/devicetree/bindings/watchdog/ziirave-wdt.txt deleted +0
-20@@ -1,19 +0,0 @@ -Zodiac RAVE Watchdog Timer - -Required properties: -- compatible: must be "zii,rave-wdt" -- reg: i2c slave address of device, usually 0x38 - -Optional Properties: -- timeout-sec: Watchdog timeout value in seconds. -- reset-duration-ms: Duration of the pulse generated when the watchdog times - out. Value in milliseconds. - -Example: - - watchdog@38 { - compatible = "zii,rave-wdt"; - reg = <0x38>; - timeout-sec = <30>; - reset-duration-ms = <30>; - }; --2.34.1
Quoted 44 lines · Frank Li
Quoted 34 lines · Conor Dooley
Quoted 33 lines · Frank Li
Convert ziirave-wdt.txt to yaml format.
Additional change:
- Add i2c node in example.
- Add ref towatchdog.yamlFix below warning:
arch/arm64/boot/dts/freescale/imx8mq-zii-ultra-rmb3.dtb: /soc@0/bus@30800000/i2c@30a40000/watchdog@38:
failed to match any schema with compatible: ['zii,rave-wdt']Signed-off-by Frank Li <[email protected]>---
Change from v1 to v2
- add refwatchdog.yaml
- Remove timeout-sec--- .../bindings/watchdog/zii,rave-wdt.yaml | 47 +++++++++++++++++++ .../bindings/watchdog/ziirave-wdt.txt | 19 -------- 2 files changed, 47 insertions(+), 19 deletions(-) create mode 100644 Documentation/devicetree/bindings/watchdog/zii,rave-wdt.yaml delete mode 100644 Documentation/devicetree/bindings/watchdog/ziirave-wdt.txtDocumentation/devicetree/bindings/watchdog/zii,rave-wdt.yaml new file +5
-0@@ -0,0 +1,47 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/watchdog/zii,rave-wdt.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml#Quoted 8 lines
Documentation/devicetree/bindings/watchdog/zii,rave-wdt.yaml line 10
Quoted 5 lines
Documentation/devicetree/bindings/watchdog/zii,rave-wdt.yaml new file +5
-0+ +title: Zodiac RAVE Watchdog Timer + +maintainers: + - Frank Li <[email protected]>When you're converting bindings, listing yourself as the maintainer only really makes sense if you know/care about the hardware IMO.
Quoted 2 lines
I faced this problem. I am not sure who I can put as maintainer. How to decide binding doc maintainer? same as driver maintainer?
Same as the driver maintainer is usually the way to go, yeah.