flow_dissector: Dissect UDP encapsulation protocols
Subsystems (10)
v2 cover flow_dissector: Dissect UDP encapsulation protocols
Add support in flow_dissector for dissecting into UDP encapsulations like VXLAN. __skb_flow_dissect_udp is called for IPPROTO_UDP. The flag FLOW_DISSECTOR_F_PARSE_UDP_ENCAPS enables parsing of UDP encapsulations. If the flag is set when parsing a UDP packet then a socket lookup is performed. The offset of the base network header, either an IPv4 or IPv6 header, is tracked and passed to __skb_flow_dissect_udp so that it can perform the socket lookup. If a socket is found and it's for a UDP encapsulation (encap_type is set in the UDP socket) then a switch is performed on the encap_type value (cases are UDP_ENCAP_* values)
Changes in the patch set:
- Unconstantify struct net argument in flowdis functions so we can call UDP socket lookup functions
- Dissect ETH_P_TEB in main flow dissector loop, move ETH_P_TEB check out of __skb_flow_dissect_gre and process it in main loop
- Add UDP_ENCAP constants for tipc, fou, gue, sctp, rxe, pfcp, wireguard, bareudp, vxlan, vxlan_gpe, geneve, and amt
- For the various UDP encapsulation protocols, Instead of just setting UDP tunnel encap type to 1, set it to the corresponding UDP_ENCAP constant. This allows identify the encapsulation protocol for a UDP socket by the encap_type
- Add function __skb_flow_dissect_udp in flow_dissector and call it for UDP packets. If a UDP encapsulation is present then the function returns either FLOW_DISSECT_RET_PROTO_AGAIN or FLOW_DISSECT_RET_IPPROTO_AGAIN
- Add flag FLOW_DISSECTOR_F_PARSE_UDP_ENCAPS that indicates UDP encapsulations should be dissected
- Add __skb_flow_dissect_vxlan which is called when encap_type is UDP_ENCAP_VXLAN or UDP_ENCAP_VXLAN_GPE. Dissect VXLAN and return a next protocol and offset
- Add __skb_flow_dissect_fou which is called when encap_type is UDP_ENCAP_FOU. Dissect FOU and return a next protocol and offset
- Add support for ESP, L2TP, and SCTP in UDP in __skb_flow_dissect_udp. All we need to do is return FLOW_DISSECT_RET_IPPROTO_AGAIN and the corresponding IP protocol number
- Add __skb_flow_dissect_geneve which is called when encap_type is UDP_ENCAP_GENEVE. Dissect geneve and return a next protocol and offset
- Add __skb_flow_dissect_gue which is called when encap_type is UDP_ENCAP_GUE. Dissect gue and return a next protocol and offset
- Add __skb_flow_dissect_gtp which is called when encap_type is UDP_ENCAP_GTP. Dissect gtp and return a next protocol and offset
Tested: Verified fou, gue, vxlan, and geneve are properly dissected for IPv4 and IPv6 cases. This includes testing ETH_P_TEB case
v2:
- Add #if IS_ENABLED(CONFIG_IPV6) around IPv6 cases when dissecting UDP. Also, c all ipv6_bpf_stub->udp6_lib_lookup instead of udp6_lib_lookup directly since udp6_lib_lookup in the IPv6 module
- Drop patch to unconstantify struct net argument in flowdis functions, edumazet added const to ne argument in UDP socket lookup functions
- As support in flowdis ipproto switch for no-next-hdr. Just exit flowdis on good result when this is seen
- Merge patches that move TEB processing out of GRE and moved into main protocol switch
- Rename bpoff in UDP flow dissector functions to be base_nhoff for clarity
- Parse GTPv1 extension headers (part of this is moving gtp_parse_exthdrs to a header file
- Exit flowdis on good result if NPDU or SEQ GTPv1 flags are set
Tom Herbert (12):
flow_dissector: Parse ETH_P_TEB and move out of GRE
udp_encaps: Add new UDP_ENCAP constants
udp_encaps: Set proper UDP_ENCAP types in tunnel setup
flow_dissector: UDP encap infrastructure
flow_dissector: Parse vxlan in UDP
flow_dissector: Parse foo-over-udp (FOU)
flow_dissector: Parse ESP, L2TP, and SCTP in UDP
flow_dissector: Parse Geneve in UDP
flow_dissector: Parse GUE in UDP
gtp: Move gtp_parse_exthdrs into net/gtp.h
flow_dissector: Parse gtp in UDP
flow_dissector: Add case in ipproto switch for NEXTHDR_NONE
drivers/infiniband/sw/rxe/rxe_net.c | 2 +- drivers/net/amt.c | 2 +- drivers/net/bareudp.c | 2 +- drivers/net/geneve.c | 2 +- drivers/net/gtp.c | 37 --- drivers/net/pfcp.c | 2 +- drivers/net/vxlan/vxlan_core.c | 3 +- drivers/net/wireguard/socket.c | 2 +- include/net/flow_dissector.h | 1 + include/net/fou.h | 16 + include/net/gtp.h | 38 +++ include/uapi/linux/udp.h | 13 + net/core/flow_dissector.c | 448 ++++++++++++++++++++++++++-- net/ipv4/fou_core.c | 19 +- net/sctp/protocol.c | 2 +- net/tipc/udp_media.c | 2 +- 16 files changed, 502 insertions(+), 89 deletions(-)
Signature · 1 line
2.34.1
PATCH v2 1/12 flow_dissector: Parse ETH_P_TEB and move out of GRE
ETH_P_TEB (Trans Ether Bridging) is the EtherType to carry a plain Etherent frame. Add case in skb_flow_dissect to parse packets of this type
If the GRE protocol is ETH_P_TEB then just process that as any another EtherType since it's now supported in the main loop
--- net/core/flow_dissector.c | 57 +++++++++++++++++++++------------------ 1 file changed, 31 insertions(+), 26 deletions(-)
net/core/flow_dissector.c +31 -26
@@ -654,7 +654,7 @@ __skb_flow_dissect_gre(const struct sk_buff *skb,struct flow_dissector_key_control *key_control, struct flow_dissector *flow_dissector, void *target_container, const void *data, - __be16 *p_proto, int *p_nhoff, int *p_hlen, + __be16 *p_proto, int *p_nhoff, int hlen, unsigned int flags) { struct flow_dissector_key_keyid *key_keyid;
@@ -663,7 +663,7 @@ __skb_flow_dissect_gre(const struct sk_buff *skb,u16 gre_ver; hdr =__skb_header_pointer (skb, *p_nhoff,sizeof (_hdr), - data, *p_hlen, &_hdr); + data, hlen, &_hdr);if (!hdr)return FLOW_DISSECT_RET_OUT_BAD ;
@@ -695,7 +695,7 @@ __skb_flow_dissect_gre(const struct sk_buff *skb, keyid =__skb_header_pointer (skb, *p_nhoff + offset,sizeof (_keyid), - data, *p_hlen, &_keyid); + data, hlen, &_keyid);if (!keyid)return FLOW_DISSECT_RET_OUT_BAD ;
@@ -715,27 +715,11 @@ __skb_flow_dissect_gre(const struct sk_buff *skb,if (hdr->flags &GRE_SEQ ) offset += sizeof_field(struct pptp_gre_header, seq); -if (gre_ver ==0 ) { -if (*p_proto ==htons (ETH_P_TEB )) { -const struct ethhdr *eth; -struct ethhdr _eth; - - eth =__skb_header_pointer (skb, *p_nhoff + offset, -sizeof (_eth), - data, *p_hlen, &_eth); -if (!eth) -return FLOW_DISSECT_RET_OUT_BAD ; - *p_proto = eth->h_proto; - offset +=sizeof (*eth); - -/* Cap headers that we access via pointers at the -* end of the Ethernet header as our maximum alignment -* at that point is only 2 bytes. -*/ -if (NET_IP_ALIGN ) - *p_hlen = *p_nhoff + offset; - } - }else {/* version 1, must be PPTP */ +/* For GRE version 0 p_proto is already correctly set (including if +* it is ETH_P_TEB) +*/ + +if (gre_ver ==1 ) {/* Version 1 is PPP */ u8 _ppp_hdr[PPP_HDRLEN ];u8 *ppp_hdr;
@@ -744,7 +728,7 @@ __skb_flow_dissect_gre(const struct sk_buff *skb, ppp_hdr =__skb_header_pointer (skb, *p_nhoff + offset,sizeof (_ppp_hdr), - data, *p_hlen, _ppp_hdr); + data, hlen, _ppp_hdr);if (!ppp_hdr)return FLOW_DISSECT_RET_OUT_BAD ;
@@ -1284,6 +1268,27 @@ bool __skb_flow_dissect(const struct net *net,break ; } +case htons (ETH_P_TEB ): { +const struct ethhdr *eth; +struct ethhdr _eth; + + eth =__skb_header_pointer (skb, nhoff,sizeof (_eth), + data, hlen, &_eth); +if (!eth) + goto out_bad; + + proto = eth->h_proto; + nhoff +=sizeof (*eth); + +/* Cap headers that we access via pointers at the +* end of the Ethernet header as our maximum alignment +* at that point is only 2 bytes. +*/ +if (NET_IP_ALIGN ) + hlen = nhoff; + + goto proto_again; + }case htons (ETH_P_8021AD ):case htons (ETH_P_8021Q ): {const struct vlan_hdr *vlan =NULL ;
@@ -1531,7 +1536,7 @@ bool __skb_flow_dissect(const struct net *net, fdret =__skb_flow_dissect_gre (skb, key_control, flow_dissector, target_container, data, - &proto, &nhoff, &hlen, flags); + &proto, &nhoff, hlen, flags);break ;case NEXTHDR_HOP :
Signature · 1 line
2.34.1
Re: [PATCH net-next v2 01/12] flow_dissector: Parse ETH_P_TEB and move out of GRE
Quoted 8 lines · Tom Herbert
ETH_P_TEB(Trans Ether Bridging) is the EtherType to carry a plain Etherent frame. Add case inskb_flow_dissectto parse packets of this typeIf the GRE protocol is
ETH_P_TEBthen just process that as any another EtherType since it's now supported in the main loopSigned-off-by Tom Herbert <[email protected]>
Quoted 34 lines
net/core/flow_dissector.c +8
-21-if (gre_ver ==0 ) { -if (*p_proto ==htons (ETH_P_TEB )) { -const struct ethhdr *eth; -struct ethhdr _eth; - - eth =__skb_header_pointer (skb, *p_nhoff + offset, -sizeof (_eth), - data, *p_hlen, &_eth); -if (!eth) -return FLOW_DISSECT_RET_OUT_BAD ; - *p_proto = eth->h_proto; - offset +=sizeof (*eth); - -/* Cap headers that we access via pointers at the -* end of the Ethernet header as our maximum alignment -* at that point is only 2 bytes. -*/ -if (NET_IP_ALIGN ) - *p_hlen = *p_nhoff + offset; - } - }else {/* version 1, must be PPTP */ @@ -1284,6 +1268,27 @@ bool __skb_flow_dissect(const struct net *net,break ; } +case htons (ETH_P_TEB ): { +const struct ethhdr *eth; +struct ethhdr _eth; + + eth =__skb_header_pointer (skb, nhoff,sizeof (_eth), + data, hlen, &_eth); +if (!eth) + goto out_bad;
net/core/flow_dissector.c bool __skb_flow_dissect(const struct net *net, · line 1288
Quoted 10 lines
net/core/flow_dissector.c +10
-0+ + proto = eth->h_proto; + nhoff +=sizeof (*eth); + +/* Cap headers that we access via pointers at the +* end of the Ethernet header as our maximum alignment +* at that point is only 2 bytes. +*/ +if (NET_IP_ALIGN ) + hlen = nhoff;
I wonder why this exists. But besides the point of this move.
Quoted 3 lines
net/core/flow_dissector.c +3
-0+ + goto proto_again; + }
Re: [PATCH net-next v2 01/12] flow_dissector: Parse ETH_P_TEB and move out of GRE
Quoted 51 lines · Willem de Bruijn
Quoted 8 lines · Tom Herbert
ETH_P_TEB(Trans Ether Bridging) is the EtherType to carry a plain Etherent frame. Add case inskb_flow_dissectto parse packets of this typeIf the GRE protocol is
ETH_P_TEBthen just process that as any another EtherType since it's now supported in the main loopSigned-off-by Tom Herbert <[email protected]>Reviewed-by Willem de Bruijn <[email protected]>Quoted 38 lines
net/core/flow_dissector.c +12
-21-if (gre_ver ==0 ) { -if (*p_proto ==htons (ETH_P_TEB )) { -const struct ethhdr *eth; -struct ethhdr _eth; - - eth =__skb_header_pointer (skb, *p_nhoff + offset, -sizeof (_eth), - data, *p_hlen, &_eth); -if (!eth) -return FLOW_DISSECT_RET_OUT_BAD ; - *p_proto = eth->h_proto; - offset +=sizeof (*eth); - -/* Cap headers that we access via pointers at the -* end of the Ethernet header as our maximum alignment -* at that point is only 2 bytes. -*/ -if (NET_IP_ALIGN ) - *p_hlen = *p_nhoff + offset; - } - }else {/* version 1, must be PPTP */ @@ -1284,6 +1268,27 @@ bool __skb_flow_dissect(const struct net *net,break ; } +case htons (ETH_P_TEB ): { +const struct ethhdr *eth; +struct ethhdr _eth; + + eth =__skb_header_pointer (skb, nhoff,sizeof (_eth), + data, hlen, &_eth); +if (!eth) + goto out_bad; + + proto = eth->h_proto; + nhoff +=sizeof (*eth); +
Quoted 8 lines
net/core/flow_dissector.c bool __skb_flow_dissect(const struct net *net, · line 1288
Quoted 6 lines
net/core/flow_dissector.c +6
-0+/* Cap headers that we access via pointers at the +* end of the Ethernet header as our maximum alignment +* at that point is only 2 bytes. +*/ +if (NET_IP_ALIGN ) + hlen = nhoff;I wonder why this exists. But besides the point of this move.
Willem,
Ethernet header breaks 4-byte alignment of encapsulated protocols since it's 14 bytes, so the NET_IP_ALIGN can be used on architectures that don't like unaligned loads.
Tom
Quoted 5 lines
Quoted 4 lines
net/core/flow_dissector.c +3
-0+ + goto proto_again; + }
Willem de Bruijn
maintainerRe: [PATCH net-next v2 01/12] flow_dissector: Parse ETH_P_TEB and move out of GRE
Quoted 62 lines · Tom Herbert
Quoted 51 lines · Willem de Bruijn
Quoted 8 lines · Tom Herbert
ETH_P_TEB(Trans Ether Bridging) is the EtherType to carry a plain Etherent frame. Add case inskb_flow_dissectto parse packets of this typeIf the GRE protocol is
ETH_P_TEBthen just process that as any another EtherType since it's now supported in the main loopSigned-off-by Tom Herbert <[email protected]>Reviewed-by Willem de Bruijn <[email protected]>Quoted 38 lines
net/core/flow_dissector.c +12
-21-if (gre_ver ==0 ) { -if (*p_proto ==htons (ETH_P_TEB )) { -const struct ethhdr *eth; -struct ethhdr _eth; - - eth =__skb_header_pointer (skb, *p_nhoff + offset, -sizeof (_eth), - data, *p_hlen, &_eth); -if (!eth) -return FLOW_DISSECT_RET_OUT_BAD ; - *p_proto = eth->h_proto; - offset +=sizeof (*eth); - -/* Cap headers that we access via pointers at the -* end of the Ethernet header as our maximum alignment -* at that point is only 2 bytes. -*/ -if (NET_IP_ALIGN ) - *p_hlen = *p_nhoff + offset; - } - }else {/* version 1, must be PPTP */ @@ -1284,6 +1268,27 @@ bool __skb_flow_dissect(const struct net *net,break ; } +case htons (ETH_P_TEB ): { +const struct ethhdr *eth; +struct ethhdr _eth; + + eth =__skb_header_pointer (skb, nhoff,sizeof (_eth), + data, hlen, &_eth); +if (!eth) + goto out_bad; + + proto = eth->h_proto; + nhoff +=sizeof (*eth); +Quoted 8 lines
net/core/flow_dissector.c bool __skb_flow_dissect(const struct net *net, · line 1288
Quoted 6 lines
net/core/flow_dissector.c +6
-0+/* Cap headers that we access via pointers at the +* end of the Ethernet header as our maximum alignment +* at that point is only 2 bytes. +*/ +if (NET_IP_ALIGN ) + hlen = nhoff;I wonder why this exists. But besides the point of this move.
Quoted 5 lines
Willem,
Ethernet header breaks 4-byte alignment of encapsulated protocols since it's 14 bytes, so the
NET_IP_ALIGNcan be used on architectures that don't like unaligned loads.
I understand how NET_IP_ALIGN is used by drivers.
I don't understand its use here in the flow dissector. Why is hlen capped if it is set?
Re: [PATCH net-next v2 01/12] flow_dissector: Parse ETH_P_TEB and move out of GRE
Quoted 66 lines · Willem de Bruijn
Quoted 64 lines · Tom Herbert
Quoted 51 lines · Willem de Bruijn
Quoted 8 lines · Tom Herbert
ETH_P_TEB(Trans Ether Bridging) is the EtherType to carry a plain Etherent frame. Add case inskb_flow_dissectto parse packets of this typeIf the GRE protocol is
ETH_P_TEBthen just process that as any another EtherType since it's now supported in the main loopSigned-off-by Tom Herbert <[email protected]>Reviewed-by Willem de Bruijn <[email protected]>Quoted 38 lines
net/core/flow_dissector.c +12
-21-if (gre_ver ==0 ) { -if (*p_proto ==htons (ETH_P_TEB )) { -const struct ethhdr *eth; -struct ethhdr _eth; - - eth =__skb_header_pointer (skb, *p_nhoff + offset, -sizeof (_eth), - data, *p_hlen, &_eth); -if (!eth) -return FLOW_DISSECT_RET_OUT_BAD ; - *p_proto = eth->h_proto; - offset +=sizeof (*eth); - -/* Cap headers that we access via pointers at the -* end of the Ethernet header as our maximum alignment -* at that point is only 2 bytes. -*/ -if (NET_IP_ALIGN ) - *p_hlen = *p_nhoff + offset; - } - }else {/* version 1, must be PPTP */ @@ -1284,6 +1268,27 @@ bool __skb_flow_dissect(const struct net *net,break ; } +case htons (ETH_P_TEB ): { +const struct ethhdr *eth; +struct ethhdr _eth; + + eth =__skb_header_pointer (skb, nhoff,sizeof (_eth), + data, hlen, &_eth); +if (!eth) + goto out_bad; + + proto = eth->h_proto; + nhoff +=sizeof (*eth); +Quoted 8 lines
net/core/flow_dissector.c bool __skb_flow_dissect(const struct net *net, · line 1288
Quoted 6 lines
net/core/flow_dissector.c +6
-0+/* Cap headers that we access via pointers at the +* end of the Ethernet header as our maximum alignment +* at that point is only 2 bytes. +*/ +if (NET_IP_ALIGN ) + hlen = nhoff;I wonder why this exists. But besides the point of this move.
Willem,
Quoted 8 lines
Quoted 3 lines
Ethernet header breaks 4-byte alignment of encapsulated protocols since it's 14 bytes, so the
NET_IP_ALIGNcan be used on architectures that don't like unaligned loads.I understand how
NET_IP_ALIGNis used by drivers.I don't understand its use here in the flow dissector. Why is hlen capped if it is set?
Willem,
For the real Ethernet header the receive skbuf is offset by two so that device places the packet such that the Ethernet payload, i.e. IP header, is aligned to four bytes (14+2=16 which will be offset of IP header). When a packets contains an encapsulated Ethernet header, the offset of the header is aligned to four bytes which means the payload of that Ethernet header, i.e. an encapsulated IP header, is not four byte aligned and neither are any subsequent headers (TCP, UDP, etc.). On some architectures, performing unaligned loads is expensive compared to aligned loads, so hlen is being capped here to avoid having flow dissector do that on unaligned headers after the Ethernet header. It's a tradeoff between performance and deeper flow dissection.
Tom
Willem de Bruijn
maintainerRe: [PATCH net-next v2 01/12] flow_dissector: Parse ETH_P_TEB and move out of GRE
Quoted 30 lines
Quoted 11 lines
Quoted 11 lines
Quoted 8 lines
net/core/flow_dissector.c bool __skb_flow_dissect(const struct net *net, · line 1288
Quoted 6 lines
net/core/flow_dissector.c +6
-0+/* Cap headers that we access via pointers at the +* end of the Ethernet header as our maximum alignment +* at that point is only 2 bytes. +*/ +if (NET_IP_ALIGN ) + hlen = nhoff;I wonder why this exists. But besides the point of this move.
Willem,
Quoted 8 lines
Quoted 3 lines
Ethernet header breaks 4-byte alignment of encapsulated protocols since it's 14 bytes, so the
NET_IP_ALIGNcan be used on architectures that don't like unaligned loads.I understand how
NET_IP_ALIGNis used by drivers.I don't understand its use here in the flow dissector. Why is hlen capped if it is set?
Willem,
For the real Ethernet header the receive skbuf is offset by two so that device places the packet such that the Ethernet payload, i.e. IP header, is aligned to four bytes (14+2=16 which will be offset of IP header). When a packets contains an encapsulated Ethernet header, the offset of the header is aligned to four bytes which means the payload of that Ethernet header, i.e. an encapsulated IP header, is not four byte aligned and neither are any subsequent headers (TCP, UDP, etc.).
Quoted 5 lines
On some architectures, performing unaligned loads is expensive compared to aligned loads, so hlen is being capped here to avoid having flow dissector do that on unaligned headers after the Ethernet header. It's a tradeoff between performance and deeper flow dissection.
Thanks Tom. That explains.
So flow dissector behavior differs in this subtle way depending on platform.
Maybe this is a good opportunity to add a comment. This thread alone also already documents it to some extent.
PATCH v2 2/12 udp_encaps: Add new UDP_ENCAP constants
In reply to Tom HerbertAdd constants for various UDP encapsulations that are supported
--- include/uapi/linux/udp.h | 13 +++++++++++++ 1 file changed, 13 insertions(+)
include/uapi/linux/udp.h +13 -0
@@ -36,6 +36,7 @@ struct udphdr {#define UDP_GRO 104/* This socket can receive UDP GRO packets */ /* UDP encapsulation types */ +#define UDP_ENCAP_NONE 0#define UDP_ENCAP_ESPINUDP_NON_IKE 1/* unused draft-ietf-ipsec-nat-t-ike-00/01 */ #define UDP_ENCAP_ESPINUDP 2/* draft-ietf-ipsec-udp-encaps-06 */ #define UDP_ENCAP_L2TPINUDP 3/* rfc2661 */
@@ -43,5 +44,17 @@ struct udphdr {#define UDP_ENCAP_GTP1U 5/* 3GPP TS 29.060 */ #define UDP_ENCAP_RXRPC 6#define TCP_ENCAP_ESPINTCP 7/* Yikes, this is really xfrm encap types. */ +#define UDP_ENCAP_TIPC 8 +#define UDP_ENCAP_FOU 9 +#define UDP_ENCAP_GUE 10 +#define UDP_ENCAP_SCTP 11 +#define UDP_ENCAP_RXE 12 +#define UDP_ENCAP_PFCP 13 +#define UDP_ENCAP_WIREGUARD 14 +#define UDP_ENCAP_BAREUDP 15 +#define UDP_ENCAP_VXLAN 16 +#define UDP_ENCAP_VXLAN_GPE 17 +#define UDP_ENCAP_GENEVE 18 +#define UDP_ENCAP_AMT 19#endif /* _UAPI_LINUX_UDP_H */
Signature · 1 line
2.34.1
Re: [PATCH net-next v2 02/12] udp_encaps: Add new UDP_ENCAP constants
Quoted 3 lines · Tom Herbert
Add constants for various UDP encapsulations that are supported
Signed-off-by Tom Herbert <[email protected]>
If a v3 is needed, maybe add to the comment your response on why we think this is UAPI to begin with: for BPF.
PATCH v2 3/12 udp_encaps: Set proper UDP_ENCAP types in tunnel setup
In reply to Tom HerbertInstead of just setting UDP tunnel config encap_type to 1, use the appropriate constat for the tunnel type. This value can be used to determine the encapsulated protocol in UDP by looking at the socket
--- drivers/infiniband/sw/rxe/rxe_net.c | 2 +- drivers/net/amt.c | 2 +- drivers/net/bareudp.c | 2 +- drivers/net/geneve.c | 2 +- drivers/net/pfcp.c | 2 +- drivers/net/vxlan/vxlan_core.c | 3 ++- drivers/net/wireguard/socket.c | 2 +- net/ipv4/fou_core.c | 3 ++- net/sctp/protocol.c | 2 +- net/tipc/udp_media.c | 2 +- 10 files changed, 12 insertions(+), 10 deletions(-)
drivers/infiniband/sw/rxe/rxe_net.c +1 -1
@@ -193,7 +193,7 @@ static struct socket *rxe_setup_udp_tunnel(struct net *net, __be16 port,if (err <0 )return ERR_PTR (err); - tnl_cfg.encap_type =1 ; + tnl_cfg.encap_type =UDP_ENCAP_RXE ; tnl_cfg.encap_rcv = rxe_udp_encap_recv;/* Setup UDP tunnel */
drivers/net/amt.c +1 -1
@@ -2970,7 +2970,7 @@ static int amt_socket_create(struct amt_dev *amt)/* Mark socket as an encapsulation socket */ memset (&tunnel_cfg,0 ,sizeof (tunnel_cfg)); tunnel_cfg.sk_user_data = amt; - tunnel_cfg.encap_type =1 ; + tunnel_cfg.encap_type =UDP_ENCAP_AMT ; tunnel_cfg.encap_rcv = amt_rcv; tunnel_cfg.encap_err_lookup = amt_err_lookup; tunnel_cfg.encap_destroy =NULL ;
drivers/net/bareudp.c +1 -1
@@ -248,7 +248,7 @@ static int bareudp_socket_create(struct bareudp_dev *bareudp, __be16 port)/* Mark socket as an encapsulation socket */ memset (&tunnel_cfg,0 ,sizeof (tunnel_cfg)); tunnel_cfg.sk_user_data = bareudp; - tunnel_cfg.encap_type =1 ; + tunnel_cfg.encap_type =UDP_ENCAP_BAREUDP ; tunnel_cfg.encap_rcv = bareudp_udp_encap_recv; tunnel_cfg.encap_err_lookup = bareudp_err_lookup; tunnel_cfg.encap_destroy =NULL ;
drivers/net/geneve.c +1 -1
@@ -611,7 +611,7 @@ static struct geneve_sock *geneve_socket_create(struct net *net, __be16 port,/* Mark socket as an encapsulation socket */ memset (&tunnel_cfg,0 ,sizeof (tunnel_cfg)); tunnel_cfg.sk_user_data = gs; - tunnel_cfg.encap_type =1 ; + tunnel_cfg.encap_type =UDP_ENCAP_GENEVE ; tunnel_cfg.gro_receive = geneve_gro_receive; tunnel_cfg.gro_complete = geneve_gro_complete; tunnel_cfg.encap_rcv = geneve_udp_encap_recv;
drivers/net/pfcp.c +1 -1
@@ -170,7 +170,7 @@ static struct socket *pfcp_create_sock(struct pfcp_dev *pfcp) tuncfg.sk_user_data = pfcp; tuncfg.encap_rcv = pfcp_encap_recv; - tuncfg.encap_type =1 ; + tuncfg.encap_type =UDP_ENCAP_PFCP ;setup_udp_tunnel_sock (net, sock, &tuncfg);
drivers/net/vxlan/vxlan_core.c +2 -1
@@ -3572,7 +3572,8 @@ static struct vxlan_sock *vxlan_socket_create(struct net *net, bool ipv6,/* Mark socket as an encapsulation socket. */ memset (&tunnel_cfg,0 ,sizeof (tunnel_cfg)); tunnel_cfg.sk_user_data = vs; - tunnel_cfg.encap_type =1 ; + tunnel_cfg.encap_type = vs->flags &VXLAN_F_GPE ? +UDP_ENCAP_VXLAN_GPE :UDP_ENCAP_VXLAN ; tunnel_cfg.encap_rcv = vxlan_rcv; tunnel_cfg.encap_err_lookup = vxlan_err_lookup; tunnel_cfg.encap_destroy =NULL ;
drivers/net/wireguard/socket.c +1 -1
@@ -352,7 +352,7 @@ int wg_socket_init(struct wg_device *wg, u16 port)int ret;struct udp_tunnel_sock_cfg cfg = { .sk_user_data = wg, - .encap_type =1 , + .encap_type =UDP_ENCAP_WIREGUARD , .encap_rcv = wg_receive };struct socket *new4 =NULL , *new6 =NULL ;
net/ipv4/fou_core.c +2 -1
@@ -578,19 +578,20 @@ static int fou_create(struct net *net, struct fou_cfg *cfg, fou->sock = sock;memset (&tunnel_cfg,0 ,sizeof (tunnel_cfg)); - tunnel_cfg.encap_type =1 ; tunnel_cfg.sk_user_data = fou; tunnel_cfg.encap_destroy =NULL ;/* Initial for fou type */ switch (cfg->type) {case FOU_ENCAP_DIRECT : + tunnel_cfg.encap_type =UDP_ENCAP_FOU ; tunnel_cfg.encap_rcv = fou_udp_recv; tunnel_cfg.gro_receive = fou_gro_receive; tunnel_cfg.gro_complete = fou_gro_complete; fou->protocol = cfg->protocol;break ;case FOU_ENCAP_GUE : + tunnel_cfg.encap_type =UDP_ENCAP_GUE ; tunnel_cfg.encap_rcv = gue_udp_recv; tunnel_cfg.gro_receive = gue_gro_receive; tunnel_cfg.gro_complete = gue_gro_complete;
net/sctp/protocol.c +1 -1
@@ -876,7 +876,7 @@ int sctp_udp_sock_start(struct net *net)return err; } - tuncfg.encap_type =1 ; + tuncfg.encap_type =UDP_ENCAP_SCTP ; tuncfg.encap_rcv = sctp_udp_rcv; tuncfg.encap_err_lookup = sctp_udp_v4_err;setup_udp_tunnel_sock (net, sock, &tuncfg);
net/tipc/udp_media.c +1 -1
@@ -771,7 +771,7 @@ static int tipc_udp_enable(struct net *net, struct tipc_bearer *b,if (err) goto err; tuncfg.sk_user_data = ub; - tuncfg.encap_type =1 ; + tuncfg.encap_type =UDP_ENCAP_TIPC ; tuncfg.encap_rcv = tipc_udp_recv; tuncfg.encap_destroy =NULL ;setup_udp_tunnel_sock (net, ub->ubsock, &tuncfg);
Signature · 1 line
2.34.1
PATCH v2 4/12 flow_dissector: UDP encap infrastructure
In reply to Tom HerbertAdd infrastructure for parsing into UDP encapsulations
Add function __skb_flow_dissect_udp that is called for IPPROTO_UDP. The flag FLOW_DISSECTOR_F_PARSE_UDP_ENCAPS enables parsing of UDP encapsulations. If the flag is set when parsing a UDP packet then a socket lookup is performed. The offset of the base network header, either an IPv4 or IPv6 header, is tracked and passed to __skb_flow_dissect_udp so that it can perform the socket lookup
If a socket is found and it's for a UDP encapsulation (encap_type is set in the UDP socket) then a switch is performed on the encap_type value (cases are UDP_ENCAP_* values)
An encapsulated packet in UDP can either be indicated by an EtherType or IP protocol. The processing for dissecting a UDP encap protocol returns a flow dissector return code. If FLOW_DISSECT_RET_PROTO_AGAIN or FLOW_DISSECT_RET_IPPROTO_AGAIN is returned then the corresponding encapsulated protocol is dissected. The nhoff is set to point to the header to process. In the case FLOW_DISSECT_RET_PROTO_AGAIN the EtherType protocol is returned and the IP protocol is set to zero. In the case of FLOW_DISSECT_RET_IPPROTO_AGAIN, the IP protocol is returned and the EtherType protocol is returned unchanged
--- include/net/flow_dissector.h | 1 + net/core/flow_dissector.c | 121 +++++++++++++++++++++++++++++++++++ 2 files changed, 122 insertions(+)
include/net/flow_dissector.h +1 -0
@@ -384,6 +384,7 @@ enum flow_dissector_key_id {#define FLOW_DISSECTOR_F_STOP_AT_FLOW_LABEL BIT(1)#define FLOW_DISSECTOR_F_STOP_AT_ENCAP BIT(2)#define FLOW_DISSECTOR_F_STOP_BEFORE_ENCAP BIT(3) +#define FLOW_DISSECTOR_F_PARSE_UDP_ENCAPS BIT(4)struct flow_dissector_key {enum flow_dissector_key_id key_id;
net/core/flow_dissector.c +121 -0
151 lines not on this page · raw message
Signature · 1 line
2.34.1
Willem de Bruijn
maintainerRe: [PATCH net-next v2 04/12] flow_dissector: UDP encap infrastructure
Quoted 117 lines · Tom Herbert
Add infrastructure for parsing into UDP encapsulations
Add function
__skb_flow_dissect_udpthat is called forIPPROTO_UDP. The flagFLOW_DISSECTOR_F_PARSE_UDP_ENCAPSenables parsing of UDP encapsulations. If the flag is set when parsing a UDP packet then a socket lookup is performed. The offset of the base network header, either an IPv4 or IPv6 header, is tracked and passed to__skb_flow_dissect_udpso that it can perform the socket lookupIf a socket is found and it's for a UDP encapsulation (
encap_typeis set in the UDP socket) then a switch is performed on theencap_typevalue (cases are UDP_ENCAP_* values)An encapsulated packet in UDP can either be indicated by an EtherType or IP protocol. The processing for dissecting a UDP encap protocol returns a flow dissector return code. If
FLOW_DISSECT_RET_PROTO_AGAINorFLOW_DISSECT_RET_IPPROTO_AGAINis returned then the corresponding encapsulated protocol is dissected. The nhoff is set to point to the header to process. In the caseFLOW_DISSECT_RET_PROTO_AGAINthe EtherType protocol is returned and the IP protocol is set to zero. In the case ofFLOW_DISSECT_RET_IPPROTO_AGAIN, the IP protocol is returned and the EtherType protocol is returned unchangedSigned-off-by Tom Herbert <[email protected]>--- include/net/flow_dissector.h | 1 + net/core/flow_dissector.c | 121 +++++++++++++++++++++++++++++++++++ 2 files changed, 122 insertions(+)include/net/flow_dissector.h +1
-0@@ -384,6 +384,7 @@ enum flow_dissector_key_id {#define FLOW_DISSECTOR_F_STOP_AT_FLOW_LABEL BIT(1)#define FLOW_DISSECTOR_F_STOP_AT_ENCAP BIT(2)#define FLOW_DISSECTOR_F_STOP_BEFORE_ENCAP BIT(3) +#define FLOW_DISSECTOR_F_PARSE_UDP_ENCAPS BIT(4)struct flow_dissector_key {enum flow_dissector_key_id key_id;net/core/flow_dissector.c +60
-0@@ -13,6 +13,7 @@#include <net/gre.h> #include <net/pptp.h> #include <net/tipc.h> +#include <net/udp.h> #include <linux/igmp.h> #include <linux/icmp.h> #include <linux/sctp.h> @@ -806,6 +807,117 @@ __skb_flow_dissect_batadv(const struct sk_buff *skb,return FLOW_DISSECT_RET_PROTO_AGAIN ; } +static enum flow_dissect_ret +__skb_flow_dissect_udp (const struct sk_buff *skb,const struct net *net, +struct flow_dissector *flow_dissector, +void *target_container,const void *data, +int *p_nhoff,int hlen,__be16 *p_proto, +u8 *p_ip_proto,int base_nhoff,unsigned int flags) +{ +enum flow_dissect_ret ret; +const struct udphdr *udph; +struct udphdr _udph; +struct sock *sk; +__u8 encap_type; +int nhoff; + +if (!(flags &FLOW_DISSECTOR_F_PARSE_UDP_ENCAPS )) +return FLOW_DISSECT_RET_OUT_GOOD ; + +switch (*p_proto) { +case htons (ETH_P_IP ): { +const struct iphdr *iph; +struct iphdr _iph; + + iph =__skb_header_pointer (skb, base_nhoff,sizeof (_iph), data, + hlen, &_iph); +if (!iph) +return FLOW_DISSECT_RET_OUT_BAD ; + + udph =__skb_header_pointer (skb, *p_nhoff,sizeof (_udph), data, + hlen, &_udph); +if (!udph) +return FLOW_DISSECT_RET_OUT_BAD ; + +rcu_read_lock (); +/* Look up the UDPv4 socket and get the encap_type */ + sk =__udp4_lib_lookup (net, iph->saddr, udph->source, + iph->daddr, udph->dest, +inet_iif (skb),inet_sdif (skb), + net->ipv4.udp_table,NULL ); +if (!sk || !udp_sk (sk)->encap_type) { +rcu_read_unlock (); +return FLOW_DISSECT_RET_OUT_GOOD ; + } + + encap_type =udp_sk (sk)->encap_type; +rcu_read_unlock (); + +break ; + } +#if IS_ENABLED (CONFIG_IPV6 ) +case htons (ETH_P_IPV6 ): { +const struct ipv6hdr *iph; +struct ipv6hdr _iph; + +if (!likely (ipv6_bpf_stub)) +return FLOW_DISSECT_RET_OUT_GOOD ; + + iph =__skb_header_pointer (skb, base_nhoff,sizeof (_iph), data, + hlen, &_iph); +if (!iph)
net/core/flow_dissector.c __skb_flow_dissect_batadv(const struct sk_buff *skb, · line 878
Quoted 10 lines
net/core/flow_dissector.c +10
-0+return FLOW_DISSECT_RET_OUT_BAD ; + + udph =__skb_header_pointer (skb, *p_nhoff,sizeof (_udph), data, + hlen, &_udph); +if (!udph) +return FLOW_DISSECT_RET_OUT_BAD ; + +rcu_read_lock (); +/* Look up the UDPv6 socket and get the encap_type */ + sk = ipv6_bpf_stub->udp6_lib_lookup(net,
Should this use ipv6_stub?
Quoted 11 lines
net/core/flow_dissector.c +11
-0+ &iph->saddr, udph->source, + &iph->daddr, udph->dest, +inet_iif (skb),inet_sdif (skb), + net->ipv4.udp_table, NULL); + +if (!sk || !udp_sk (sk)->encap_type) { +rcu_read_unlock (); +return FLOW_DISSECT_RET_OUT_GOOD ; + } + + encap_type =udp_sk (sk)->encap_type;
net/core/flow_dissector.c __skb_flow_dissect_batadv(const struct sk_buff *skb, · line 899
Quoted 10 lines
net/core/flow_dissector.c +10
-0+rcu_read_unlock (); + + break; + } +#endif /* CONFIG_IPV6 */ +default : +return FLOW_DISSECT_RET_OUT_GOOD ; + } + + nhoff = *p_nhoff +sizeof (struct udphdr );
maybe sizeof(_udph) for consistency
Quoted 21 lines
net/core/flow_dissector.c +21
-0+ ret =FLOW_DISSECT_RET_OUT_GOOD ; + +switch (encap_type) { +default : +break ; + } + +switch (ret) { +case FLOW_DISSECT_RET_PROTO_AGAIN : + *p_ip_proto =0 ; + fallthrough; +case FLOW_DISSECT_RET_IPPROTO_AGAIN : + *p_nhoff = nhoff; +break ; +default : +break ; + } + +return ret; +} +
kernel test robot
build botRe: [PATCH net-next v2 04/12] flow_dissector: UDP encap infrastructure
In reply to Tom Herbertkernel test robot noticed the following build errors:
Hi Tom,
kernel test robot noticed the following build errors:
[auto build test ERROR on net-next/main]
url: https://github.com/intel-lab-lkp/linux/commits/Tom-Herbert/flow_dissector-Parse-ETH_P_TEB-and-move-out-of-GRE/20240816-102659 base: net-next/main patch link: https://lore.kernel.org/r/20240815214527.2100137-5-tom%40herbertland.com patch subject: [PATCH net-next v2 04/12] flow_dissector: UDP encap infrastructure config: loongarch-randconfig-002-20240817 (https://download.01.org/0day-ci/archive/20240817/[email protected]/config) compiler: loongarch64-linux-gcc (GCC) 14.1.0 reproduce (this is a W=1 build): (https://download.01.org/0day-ci/archive/20240817/[email protected]/reproduce)
If you fix the issue in a separate patch/commit (i.e. not just a new version of the same patch/commit), kindly add following tags
| Reported-by: kernel test robot <[email protected]>
| Closes: https://lore.kernel.org/oe-kbuild-all/[email protected]/
All errors (new ones prefixed by >>):
loongarch64-linux-ld: net/core/flow_dissector.o: in function `__skb_flow_dissect_udp':
>> net/core/flow_dissector.c:844:(.text+0x13e8): undefined reference to `__udp4_lib_lookup'
vim +844 net/core/flow_dissector.c
809
810 static enum flow_dissect_ret
811 __skb_flow_dissect_udp(const struct sk_buff *skb, const struct net *net,
812 struct flow_dissector *flow_dissector,
813 void *target_container, const void *data,
814 int *p_nhoff, int hlen, __be16 *p_proto,
815 u8 *p_ip_proto, int base_nhoff, unsigned int flags)
816 {
817 enum flow_dissect_ret ret;
818 const struct udphdr *udph;
819 struct udphdr _udph;
820 struct sock *sk;
821 __u8 encap_type;
822 int nhoff;
823
824 if (!(flags & FLOW_DISSECTOR_F_PARSE_UDP_ENCAPS))
825 return FLOW_DISSECT_RET_OUT_GOOD;
826
827 switch (*p_proto) {
828 case htons(ETH_P_IP): {
829 const struct iphdr *iph;
830 struct iphdr _iph;
831
832 iph = __skb_header_pointer(skb, base_nhoff, sizeof(_iph), data,
833 hlen, &_iph);
834 if (!iph)
835 return FLOW_DISSECT_RET_OUT_BAD;
836
837 udph = __skb_header_pointer(skb, *p_nhoff, sizeof(_udph), data,
838 hlen, &_udph);
839 if (!udph)
840 return FLOW_DISSECT_RET_OUT_BAD;
841
842 rcu_read_lock();
843 /* Look up the UDPv4 socket and get the encap_type */
> 844 sk = __udp4_lib_lookup(net, iph->saddr, udph->source,
845 iph->daddr, udph->dest,
846 inet_iif(skb), inet_sdif(skb),
847 net->ipv4.udp_table, NULL);
848 if (!sk || !udp_sk(sk)->encap_type) { 849 rcu_read_unlock();
850 return FLOW_DISSECT_RET_OUT_GOOD;
851 }
852
853 encap_type = udp_sk(sk)->encap_type;
854 rcu_read_unlock();
855
856 break;
857 }
858 #if IS_ENABLED(CONFIG_IPV6)
859 case htons(ETH_P_IPV6): {
860 const struct ipv6hdr *iph;
861 struct ipv6hdr _iph;
862
863 if (!likely(ipv6_bpf_stub))
864 return FLOW_DISSECT_RET_OUT_GOOD;
865
866 iph = __skb_header_pointer(skb, base_nhoff, sizeof(_iph), data,
867 hlen, &_iph);
868 if (!iph)
869 return FLOW_DISSECT_RET_OUT_BAD;
870
871 udph = __skb_header_pointer(skb, *p_nhoff, sizeof(_udph), data,
872 hlen, &_udph);
873 if (!udph)
874 return FLOW_DISSECT_RET_OUT_BAD;
875
876 rcu_read_lock();
877 /* Look up the UDPv6 socket and get the encap_type */
878 sk = ipv6_bpf_stub->udp6_lib_lookup(net,
879 &iph->saddr, udph->source,
880 &iph->daddr, udph->dest,
881 inet_iif(skb), inet_sdif(skb),
882 net->ipv4.udp_table, NULL);
883
884 if (!sk || !udp_sk(sk)->encap_type) {
885 rcu_read_unlock();
886 return FLOW_DISSECT_RET_OUT_GOOD;
887 }
888
889 encap_type = udp_sk(sk)->encap_type;
890 rcu_read_unlock();
891
892 break;
893 }
894 #endif /* CONFIG_IPV6 */
895 default:
896 return FLOW_DISSECT_RET_OUT_GOOD;
897 }
898
899 nhoff = *p_nhoff + sizeof(struct udphdr);
900 ret = FLOW_DISSECT_RET_OUT_GOOD;
901
902 switch (encap_type) {
903 default:
904 break;
905 }
906
907 switch (ret) {
908 case FLOW_DISSECT_RET_PROTO_AGAIN:
909 *p_ip_proto = 0;
910 fallthrough;
911 case FLOW_DISSECT_RET_IPPROTO_AGAIN:
912 *p_nhoff = nhoff;
913 break;
914 default:
915 break;
916 }
917
918 return ret;
919 }
920
Signature · 2 lines
0-DAY CI Kernel Test Service https://github.com/intel/lkp-tests/wiki
Re: [PATCH net-next v2 04/12] flow_dissector: UDP encap infrastructure
In reply to Tom HerbertQuoted 25 lines · Tom Herbert
Add infrastructure for parsing into UDP encapsulations
Add function
__skb_flow_dissect_udpthat is called forIPPROTO_UDP. The flagFLOW_DISSECTOR_F_PARSE_UDP_ENCAPSenables parsing of UDP encapsulations. If the flag is set when parsing a UDP packet then a socket lookup is performed. The offset of the base network header, either an IPv4 or IPv6 header, is tracked and passed to__skb_flow_dissect_udpso that it can perform the socket lookupIf a socket is found and it's for a UDP encapsulation (
encap_typeis set in the UDP socket) then a switch is performed on theencap_typevalue (cases are UDP_ENCAP_* values)An encapsulated packet in UDP can either be indicated by an EtherType or IP protocol. The processing for dissecting a UDP encap protocol returns a flow dissector return code. If
FLOW_DISSECT_RET_PROTO_AGAINorFLOW_DISSECT_RET_IPPROTO_AGAINis returned then the corresponding encapsulated protocol is dissected. The nhoff is set to point to the header to process. In the caseFLOW_DISSECT_RET_PROTO_AGAINthe EtherType protocol is returned and the IP protocol is set to zero. In the case ofFLOW_DISSECT_RET_IPPROTO_AGAIN, the IP protocol is returned and the EtherType protocol is returned unchanged
Quoted 1 line
Signed-off-by Tom Herbert <[email protected]>
I am a bit confused.
How is this series netns ready ?
tunnel decap devices can be in different netns from the lower device.
socket lookups need the correct net pointer.
Re: [PATCH net-next v2 04/12] flow_dissector: UDP encap infrastructure
Quoted 29 lines · Eric Dumazet
Quoted 25 lines · Tom Herbert
Add infrastructure for parsing into UDP encapsulations
Add function
__skb_flow_dissect_udpthat is called forIPPROTO_UDP. The flagFLOW_DISSECTOR_F_PARSE_UDP_ENCAPSenables parsing of UDP encapsulations. If the flag is set when parsing a UDP packet then a socket lookup is performed. The offset of the base network header, either an IPv4 or IPv6 header, is tracked and passed to__skb_flow_dissect_udpso that it can perform the socket lookupIf a socket is found and it's for a UDP encapsulation (
encap_typeis set in the UDP socket) then a switch is performed on theencap_typevalue (cases are UDP_ENCAP_* values)An encapsulated packet in UDP can either be indicated by an EtherType or IP protocol. The processing for dissecting a UDP encap protocol returns a flow dissector return code. If
FLOW_DISSECT_RET_PROTO_AGAINorFLOW_DISSECT_RET_IPPROTO_AGAINis returned then the corresponding encapsulated protocol is dissected. The nhoff is set to point to the header to process. In the caseFLOW_DISSECT_RET_PROTO_AGAINthe EtherType protocol is returned and the IP protocol is set to zero. In the case ofFLOW_DISSECT_RET_IPPROTO_AGAIN, the IP protocol is returned and the EtherType protocol is returned unchangedQuoted 1 line
Signed-off-by Tom Herbert <[email protected]>
Quoted 7 lines
I am a bit confused.
How is this series netns ready ?
tunnel decap devices can be in different netns from the lower device.
socket lookups need the correct net pointer.
Hi Eric,
How would we know what the correct net pointer is? Seems like there could be multiple choices if netns were nested. Maybe best effort is sufficient here?
Tom
PATCH v2 5/12 flow_dissector: Parse vxlan in UDP
In reply to Tom HerbertParse vxlan in a UDP encapsulation
--- net/core/flow_dissector.c | 57 +++++++++++++++++++++++++++++++++++++++ 1 file changed, 57 insertions(+)
net/core/flow_dissector.c +57 -0
@@ -13,7 +13,9 @@#include <net/gre.h> #include <net/pptp.h> #include <net/tipc.h> +#include <net/tun_proto.h> #include <net/udp.h> +#include <net/vxlan.h> #include <linux/igmp.h> #include <linux/icmp.h> #include <linux/sctp.h>
@@ -756,6 +758,55 @@ __skb_flow_dissect_gre(const struct sk_buff *skb,return FLOW_DISSECT_RET_PROTO_AGAIN ; } +static enum flow_dissect_ret +__skb_flow_dissect_vxlan (const struct sk_buff *skb, +struct flow_dissector *flow_dissector, +void *target_container,const void *data, +__be16 *p_proto,int *p_nhoff,int hlen, +unsigned int flags) +{ +struct vxlanhdr *hdr, _hdr; +__be16 protocol; + + hdr =__skb_header_pointer (skb, *p_nhoff,sizeof (_hdr), data, hlen, + &_hdr); +if (!hdr) +return FLOW_DISSECT_RET_OUT_BAD ; + +/* VNI flag always required to be set */ +if (!(hdr->vx_flags &VXLAN_HF_VNI )) +return FLOW_DISSECT_RET_OUT_BAD ; + +if (hdr->vx_flags &VXLAN_F_GPE ) { +struct vxlanhdr_gpe *gpe = (struct vxlanhdr_gpe *)hdr; + +/* Need to have Next Protocol set for interfaces in GPE mode. */ +if (!gpe->np_applied) +return FLOW_DISSECT_RET_OUT_BAD ; + +/* The initial version is 0 */ +if (gpe->version !=0 ) +return FLOW_DISSECT_RET_OUT_GOOD ; + +/* "When the O bit is set to 1, the packet is an OAM packet and +* OAM so ignore +*/ +if (gpe->oam_flag) +return FLOW_DISSECT_RET_OUT_GOOD ; + + protocol =tun_p_to_eth_p (gpe->next_protocol); +if (!protocol) +return FLOW_DISSECT_RET_OUT_GOOD ; + }else { + protocol =htons (ETH_P_TEB ); + } + + *p_nhoff +=sizeof (struct vxlanhdr ); + *p_proto = protocol; + +return FLOW_DISSECT_RET_PROTO_AGAIN ; +} +/** * __skb_flow_dissect_batadv() - dissect batman-adv header * @skb: sk_buff to with the batman-adv header
@@ -900,6 +951,12 @@ __skb_flow_dissect_udp(const struct sk_buff *skb, const struct net *net, ret =FLOW_DISSECT_RET_OUT_GOOD ;switch (encap_type) { +case UDP_ENCAP_VXLAN : +case UDP_ENCAP_VXLAN_GPE : + ret =__skb_flow_dissect_vxlan (skb, flow_dissector, + target_container, data, + p_proto, &nhoff, hlen, flags); +break ;default :break ; }
Signature · 1 line
2.34.1
Re: [PATCH net-next v2 05/12] flow_dissector: Parse vxlan in UDP
Quoted 3 lines · Tom Herbert
Parse vxlan in a UDP encapsulation
Signed-off-by Tom Herbert <[email protected]>
(not very familiar with VXLAN)
Jakub Kicinski
maintainerRe: [PATCH net-next v2 05/12] flow_dissector: Parse vxlan in UDP
In reply to Tom Herbertnet/core/flow_dissector.c __skb_flow_dissect_gre(const struct sk_buff *skb, · line 780
Quoted 1 line · On Thu, 15 Aug 2024 14:45:20 -0700 Tom Herbert wrote:
net/core/flow_dissector.c +1
-0+if (hdr->vx_flags &VXLAN_F_GPE ) {
sparse points out that VXLAN_F_GPE needs to be byte swapped
not 100% sure I'm following the scheme but it appears _F_ flags are in CPU byte order, and _HF_ flags are in network
Signature · 1 line
pw-bot: cr
Re: [PATCH net-next v2 05/12] flow_dissector: Parse vxlan in UDP
Quoted 8 lines · Jakub Kicinski
Quoted 1 line · On Thu, 15 Aug 2024 14:45:20 -0700 Tom Herbert wrote:
+ if (
hdr->vx_flags&VXLAN_F_GPE) {sparse points out that
VXLAN_F_GPEneeds to be byte swappednot 100% sure I'm following the scheme but it appears _F_ flags are in CPU byte order, and _HF_ flags are in network
Hmmm, VXLAN does seem to be a bit squirrely :-) AFAICT, a VXLAN-GPE packet isn't self identifying but requires a VNI lookup which is what the vxlan driver. We don't have access to that table in flow dissector, but I think we can safely infer a VXLAN-GPE packet if the next proto-applied flag bit is set (it's always set for VXLAN-GPE, never for VXLAN).
Tom
Quoted 2 lines
--
pw-bot: cr
PATCH v2 6/12 flow_dissector: Parse foo-over-udp (FOU)
In reply to Tom HerbertParse FOU by getting the FOU protocol from the matching socket. This includes moving "struct fou" and "fou_from_sock" to fou.h
--- include/net/fou.h | 16 ++++++++++++++++ net/core/flow_dissector.c | 13 ++++++++++++- net/ipv4/fou_core.c | 16 ---------------- 3 files changed, 28 insertions(+), 17 deletions(-)
include/net/fou.h +16 -0
@@ -17,6 +17,22 @@ int __fou_build_header(struct sk_buff *skb, struct ip_tunnel_encap *e,int __gue_build_header (struct sk_buff *skb,struct ip_tunnel_encap *e,u8 *protocol,__be16 *sport,int type); +struct fou { +struct socket *sock; +u8 protocol; +u8 flags; +__be16 port; +u8 family; +u16 type; +struct list_head list; +struct rcu_head rcu; +}; + +static inline struct fou *fou_from_sock (struct sock *sk) +{ +return sk->sk_user_data; +} +int register_fou_bpf (void );#endif
net/core/flow_dissector.c +12 -1
@@ -8,6 +8,7 @@#include <linux/filter.h> #include <net/dsa.h> #include <net/dst_metadata.h> +#include <net/fou.h> #include <net/ip.h> #include <net/ipv6.h> #include <net/gre.h>
@@ -865,11 +866,11 @@ __skb_flow_dissect_udp(const struct sk_buff *skb, const struct net *net, int *p_nhoff, int hlen, __be16 *p_proto, u8 *p_ip_proto, int base_nhoff, unsigned int flags) { + __u8 encap_type, fou_protocol;enum flow_dissect_ret ret;const struct udphdr *udph;struct udphdr _udph;struct sock *sk; -__u8 encap_type;int nhoff;if (!(flags &FLOW_DISSECTOR_F_PARSE_UDP_ENCAPS ))
@@ -902,6 +903,9 @@ __skb_flow_dissect_udp(const struct sk_buff *skb, const struct net *net, } encap_type =udp_sk (sk)->encap_type; +if (encap_type ==UDP_ENCAP_FOU ) + fou_protocol =fou_from_sock (sk)->protocol; +rcu_read_unlock ();break ;
@@ -938,6 +942,9 @@ __skb_flow_dissect_udp(const struct sk_buff *skb, const struct net *net, } encap_type =udp_sk (sk)->encap_type; +if (encap_type ==UDP_ENCAP_FOU ) + fou_protocol =fou_from_sock (sk)->protocol; +rcu_read_unlock ();break ;
@@ -951,6 +958,10 @@ __skb_flow_dissect_udp(const struct sk_buff *skb, const struct net *net, ret =FLOW_DISSECT_RET_OUT_GOOD ;switch (encap_type) { +case UDP_ENCAP_FOU : + *p_ip_proto = fou_protocol; + ret =FLOW_DISSECT_RET_IPPROTO_AGAIN ; +break ;case UDP_ENCAP_VXLAN :case UDP_ENCAP_VXLAN_GPE : ret = __skb_flow_dissect_vxlan(skb, flow_dissector,
net/ipv4/fou_core.c +0 -16
@@ -21,17 +21,6 @@#include "fou_nl.h" -struct fou { -struct socket *sock; -u8 protocol; -u8 flags; -__be16 port; -u8 family; -u16 type; -struct list_head list; -struct rcu_head rcu; -}; -#define FOU_F_REMCSUM_NOPARTIAL BIT(0)struct fou_cfg {
@@ -48,11 +37,6 @@ struct fou_net {struct mutex fou_lock; }; -static inline struct fou *fou_from_sock (struct sock *sk) -{ -return sk->sk_user_data; -} -static int fou_recv_pull (struct sk_buff *skb,struct fou *fou,size_t len) {/* Remove 'len' bytes from the packet (UDP header and
Signature · 1 line
2.34.1
PATCH v2 7/12 flow_dissector: Parse ESP, L2TP, and SCTP in UDP
In reply to Tom HerbertThese don't have an encapsulation header so it's fairly easy to support them
--- net/core/flow_dissector.c | 13 +++++++++++++ 1 file changed, 13 insertions(+)
net/core/flow_dissector.c +13 -0
@@ -958,10 +958,23 @@ __skb_flow_dissect_udp(const struct sk_buff *skb, const struct net *net, ret =FLOW_DISSECT_RET_OUT_GOOD ;switch (encap_type) { +case UDP_ENCAP_ESPINUDP_NON_IKE : +case UDP_ENCAP_ESPINUDP : + *p_ip_proto =IPPROTO_ESP ; + ret =FLOW_DISSECT_RET_IPPROTO_AGAIN ; +break ; +case UDP_ENCAP_L2TPINUDP : + *p_ip_proto =IPPROTO_L2TP ; + ret =FLOW_DISSECT_RET_IPPROTO_AGAIN ; +break ;case UDP_ENCAP_FOU : *p_ip_proto = fou_protocol; ret =FLOW_DISSECT_RET_IPPROTO_AGAIN ;break ; +case UDP_ENCAP_SCTP : + *p_ip_proto =IPPROTO_SCTP ; + ret =FLOW_DISSECT_RET_IPPROTO_AGAIN ; +break ;case UDP_ENCAP_VXLAN :case UDP_ENCAP_VXLAN_GPE : ret = __skb_flow_dissect_vxlan(skb, flow_dissector,
Signature · 1 line
2.34.1
Re: [PATCH net-next v2 07/12] flow_dissector: Parse ESP, L2TP, and SCTP in UDP
Quoted 4 lines · Tom Herbert
These don't have an encapsulation header so it's fairly easy to support them
Signed-off-by Tom Herbert <[email protected]>
PATCH v2 8/12 flow_dissector: Parse Geneve in UDP
In reply to Tom HerbertParse Geneve in a UDP encapsulation
--- net/core/flow_dissector.c | 29 +++++++++++++++++++++++++++++ 1 file changed, 29 insertions(+)
net/core/flow_dissector.c +29 -0
@@ -11,6 +11,7 @@#include <net/fou.h> #include <net/ip.h> #include <net/ipv6.h> +#include <net/geneve.h> #include <net/gre.h> #include <net/pptp.h> #include <net/tipc.h>
@@ -808,6 +809,29 @@ __skb_flow_dissect_vxlan(const struct sk_buff *skb,return FLOW_DISSECT_RET_PROTO_AGAIN ; } +static enum flow_dissect_ret +__skb_flow_dissect_geneve (const struct sk_buff *skb, +struct flow_dissector *flow_dissector, +void *target_container,const void *data, +__be16 *p_proto,int *p_nhoff,int hlen, +unsigned int flags) +{ +struct genevehdr *hdr, _hdr; + + hdr =__skb_header_pointer (skb, *p_nhoff,sizeof (_hdr), data, hlen, + &_hdr); +if (!hdr) +return FLOW_DISSECT_RET_OUT_BAD ; + +if (hdr->ver !=0 ) +return FLOW_DISSECT_RET_OUT_GOOD ; + + *p_proto = hdr->proto_type; + *p_nhoff +=sizeof (struct genevehdr ) + (hdr->opt_len *4 ); + +return FLOW_DISSECT_RET_PROTO_AGAIN ; +} +/** * __skb_flow_dissect_batadv() - dissect batman-adv header * @skb: sk_buff to with the batman-adv header
@@ -981,6 +1005,11 @@ __skb_flow_dissect_udp(const struct sk_buff *skb, const struct net *net, target_container, data, p_proto, &nhoff, hlen, flags);break ; +case UDP_ENCAP_GENEVE : + ret =__skb_flow_dissect_geneve (skb, flow_dissector, + target_container, data, + p_proto, &nhoff, hlen, flags); +break ;default :break ; }
Signature · 1 line
2.34.1
Re: [PATCH net-next v2 08/12] flow_dissector: Parse Geneve in UDP
Quoted 3 lines · Tom Herbert
Parse Geneve in a UDP encapsulation
Signed-off-by Tom Herbert <[email protected]>
PATCH v2 9/12 flow_dissector: Parse GUE in UDP
In reply to Tom HerbertParse both version 0 and 1 of GUE encapsulated in UDP. Add helper function __skb_direct_ip_dissect to convert an IP header to IPPROTO_IPIP or IPPROTO_IPV6 (by looking just at the version number)
--- net/core/flow_dissector.c | 60 +++++++++++++++++++++++++++++++++++++++ 1 file changed, 60 insertions(+)
net/core/flow_dissector.c +60 -0
@@ -832,6 +832,61 @@ __skb_flow_dissect_geneve(const struct sk_buff *skb,return FLOW_DISSECT_RET_PROTO_AGAIN ; } +static __u8 +__skb_direct_ip_dissect (void *hdr) +{ +/* Direct encapsulation of IPv4 or IPv6 */ + +switch (((struct iphdr *)hdr)->version) { +case 4 : +return IPPROTO_IPIP ; +case 6 : +return IPPROTO_IPV6 ; +default : +return 0 ; + } +} + +static enum flow_dissect_ret +__skb_flow_dissect_gue (const struct sk_buff *skb, +struct flow_dissector *flow_dissector, +void *target_container,const void *data, +__u8 *p_ip_proto,int *p_nhoff, +int hlen,unsigned int flags) +{ +struct guehdr *hdr, _hdr; +__u8 proto; + + hdr =__skb_header_pointer (skb, *p_nhoff,sizeof (_hdr), data, hlen, + &_hdr); +if (!hdr) +return FLOW_DISSECT_RET_OUT_BAD ; + +switch (hdr->version) { +case 0 : +if (unlikely (hdr->control)) +return FLOW_DISSECT_RET_OUT_GOOD ; + + *p_nhoff +=sizeof (struct guehdr ) + (hdr->hlen <<2 ); + *p_ip_proto = hdr->proto_ctype; + +break ; +case 1 : +/* Direct encapsulation of IPv4 or IPv6 */ + + proto =__skb_direct_ip_dissect (hdr); +if (proto) { + *p_ip_proto = proto; +break ; + } + fallthrough; +default : +return FLOW_DISSECT_RET_OUT_GOOD ; + } + +return FLOW_DISSECT_RET_IPPROTO_AGAIN ; +} +/** * __skb_flow_dissect_batadv() - dissect batman-adv header * @skb: sk_buff to with the batman-adv header
@@ -995,6 +1050,11 @@ __skb_flow_dissect_udp(const struct sk_buff *skb, const struct net *net, *p_ip_proto = fou_protocol; ret =FLOW_DISSECT_RET_IPPROTO_AGAIN ;break ; +case UDP_ENCAP_GUE : + ret =__skb_flow_dissect_gue (skb, flow_dissector, + target_container, data, + p_ip_proto, p_nhoff, hlen, flags); +break ;case UDP_ENCAP_SCTP : *p_ip_proto =IPPROTO_SCTP ; ret =FLOW_DISSECT_RET_IPPROTO_AGAIN ;
Signature · 1 line
2.34.1
Re: [PATCH net-next v2 09/12] flow_dissector: Parse GUE in UDP
Quoted 6 lines · Tom Herbert
Parse both version 0 and 1 of GUE encapsulated in UDP. Add helper function
__skb_direct_ip_dissectto convert an IP header toIPPROTO_IPIPorIPPROTO_IPV6(by looking just at the version number)Signed-off-by Tom Herbert <[email protected]>
PATCH v2 10/12 gtp: Move gtp_parse_exthdrs into net/gtp.h
In reply to Tom Herbertgtp_parse_exthdrs is a generic function, move into a header file so we can call it outside of the GTP driver (specifically, we can call it from flow dissector)
--- drivers/net/gtp.c | 37 ------------------------------------- include/net/gtp.h | 38 ++++++++++++++++++++++++++++++++++++++ 2 files changed, 38 insertions(+), 37 deletions(-)
drivers/net/gtp.c +0 -37
@@ -742,43 +742,6 @@ static int gtp1u_handle_echo_resp(struct gtp_dev *gtp, struct sk_buff *skb) msg, 0, GTP_GENL_MCGRP, GFP_ATOMIC); } -static int gtp_parse_exthdrs (struct sk_buff *skb,unsigned int *hdrlen) -{ -struct gtp_ext_hdr *gtp_exthdr, _gtp_exthdr; -unsigned int offset = *hdrlen; -__u8 *next_type, _next_type; - -/* From 29.060: "The Extension Header Length field specifies the length -* of the particular Extension header in 4 octets units." -* -* This length field includes length field size itself (1 byte), -* payload (variable length) and next type (1 byte). The extension -* header is aligned to to 4 bytes. -*/ - -do { - gtp_exthdr =skb_header_pointer (skb, offset,sizeof (*gtp_exthdr), - &_gtp_exthdr); -if (!gtp_exthdr || !gtp_exthdr->len) -return -1 ; - - offset += gtp_exthdr->len *4 ; - -/* From 29.060: "If no such Header follows, then the value of -* the Next Extension Header Type shall be 0." -*/ - next_type =skb_header_pointer (skb, offset -1 , -sizeof (_next_type), &_next_type); -if (!next_type) -return -1 ; - - }while (*next_type !=0 ); - - *hdrlen = offset; - -return 0 ; -} -static int gtp1u_udp_encap_recv (struct gtp_dev *gtp,struct sk_buff *skb) { unsigned int hdrlen = sizeof(struct udphdr) +
include/net/gtp.h +38 -0
@@ -83,4 +83,42 @@ struct gtp_ext_hdr { __u8 data[]; }; +static inline int gtp_parse_exthdrs (const struct sk_buff *skb, +unsigned int *hdrlen) +{ +struct gtp_ext_hdr *gtp_exthdr, _gtp_exthdr; +unsigned int offset = *hdrlen; +__u8 *next_type, _next_type; + +/* From 29.060: "The Extension Header Length field specifies the length +* of the particular Extension header in 4 octets units." +* +* This length field includes length field size itself (1 byte), +* payload (variable length) and next type (1 byte). The extension +* header is aligned to 4 bytes. +*/ + +do { + gtp_exthdr =skb_header_pointer (skb, offset,sizeof (*gtp_exthdr), + &_gtp_exthdr); +if (!gtp_exthdr || !gtp_exthdr->len) +return -1 ; + + offset += gtp_exthdr->len *4 ; + +/* From 29.060: "If no such Header follows, then the value of +* the Next Extension Header Type shall be 0." +*/ + next_type =skb_header_pointer (skb, offset -1 , +sizeof (_next_type), &_next_type); +if (!next_type) +return -1 ; + + }while (*next_type !=0 ); + + *hdrlen = offset; + +return 0 ; +} +#endif
Signature · 1 line
2.34.1
Re: [PATCH net-next v2 10/12] gtp: Move gtp_parse_exthdrs into net/gtp.h
Quoted 5 lines · Tom Herbert
gtp_parse_exthdrsis a generic function, move into a header file so we can call it outside of the GTP driver (specifically, we can call it from flow dissector)Signed-off-by Tom Herbert <[email protected]>
For this and next patch probably directly Cc: the GTP maintainers.
That said,
PATCH v2 11/12 flow_dissector: Parse gtp in UDP
In reply to Tom HerbertParse both version 0 and 1. Call __skb_direct_ip_dissect to determine IP version of the encapsulated packet
--- net/core/flow_dissector.c | 97 +++++++++++++++++++++++++++++++++++++++ 1 file changed, 97 insertions(+)
net/core/flow_dissector.c +97 -0
@@ -9,6 +9,7 @@#include <net/dsa.h> #include <net/dst_metadata.h> #include <net/fou.h> +#include <net/gtp.h> #include <net/ip.h> #include <net/ipv6.h> #include <net/geneve.h>
@@ -35,6 +36,7 @@#include <net/pkt_cls.h> #include <scsi/fc/fc_fcoe.h> #include <uapi/linux/batadv_packet.h> +#include <uapi/linux/gtp.h> #include <linux/bpf.h> #if IS_ENABLED (CONFIG_NF_CONNTRACK )#include <net/netfilter/nf_conntrack_core.h>
@@ -887,6 +889,91 @@ __skb_flow_dissect_gue(const struct sk_buff *skb,return FLOW_DISSECT_RET_IPPROTO_AGAIN ; } +static enum flow_dissect_ret +__skb_flow_dissect_gtp0 (const struct sk_buff *skb, +struct flow_dissector *flow_dissector, +void *target_container,const void *data, +__u8 *p_ip_proto,int *p_nhoff,int hlen, +unsigned int flags) +{ +__u8 *ip_version, _ip_version, proto; +struct gtp0_header *hdr, _hdr; + + hdr =__skb_header_pointer (skb, *p_nhoff,sizeof (_hdr), data, hlen, + &_hdr); +if (!hdr) +return FLOW_DISSECT_RET_OUT_BAD ; + +if ((hdr->flags >>5 ) !=GTP_V0 ) +return FLOW_DISSECT_RET_OUT_GOOD ; + + ip_version =skb_header_pointer (skb, *p_nhoff +sizeof (_hdr), +sizeof (*ip_version), + &_ip_version); +if (!ip_version) +return FLOW_DISSECT_RET_OUT_BAD ; + + proto =__skb_direct_ip_dissect (ip_version); +if (!proto) +return FLOW_DISSECT_RET_OUT_GOOD ; + + *p_ip_proto = proto; + *p_nhoff +=sizeof (struct gtp0_header ); + +return FLOW_DISSECT_RET_IPPROTO_AGAIN ; +} + +static enum flow_dissect_ret +__skb_flow_dissect_gtp1u (const struct sk_buff *skb, +struct flow_dissector *flow_dissector, +void *target_container,const void *data, +__u8 *p_ip_proto,int *p_nhoff,int hlen, +unsigned int flags) +{ +__u8 *ip_version, _ip_version, proto; +struct gtp1_header *hdr, _hdr; +int hdrlen =sizeof (_hdr); + + hdr =__skb_header_pointer (skb, *p_nhoff,sizeof (_hdr), data, hlen, + &_hdr); +if (!hdr) +return FLOW_DISSECT_RET_OUT_BAD ; + +if ((hdr->flags >>5 ) !=GTP_V1 ) +return FLOW_DISSECT_RET_OUT_GOOD ; + +if (hdr->type !=GTP_TPDU ) +return FLOW_DISSECT_RET_OUT_GOOD ; + +if (hdr->flags >P1_F_MASK ) + hdrlen +=4 ; + +/* Skip over GTP extension headers if they are present */ +if (hdr->flags >P1_F_EXTHDR && +gtp_parse_exthdrs (skb, &hdrlen) <0 ) +return FLOW_DISSECT_RET_OUT_BAD ; + +/* Exit if either NPDU or SEQ glags are set */ +if (hdr->flags >P1_F_NPDU || + hdr->flags >P1_F_SEQ ) +return FLOW_DISSECT_RET_OUT_GOOD ; + + ip_version =skb_header_pointer (skb, *p_nhoff + hdrlen, +sizeof (*ip_version), + &_ip_version); +if (!ip_version) +return FLOW_DISSECT_RET_OUT_GOOD ; + + proto =__skb_direct_ip_dissect (ip_version); +if (!proto) +return FLOW_DISSECT_RET_OUT_GOOD ; + + *p_ip_proto = proto; + *p_nhoff += hdrlen; + +return FLOW_DISSECT_RET_IPPROTO_AGAIN ; +} +/** * __skb_flow_dissect_batadv() - dissect batman-adv header * @skb: sk_buff to with the batman-adv header
@@ -1046,6 +1133,16 @@ __skb_flow_dissect_udp(const struct sk_buff *skb, const struct net *net, *p_ip_proto =IPPROTO_L2TP ; ret =FLOW_DISSECT_RET_IPPROTO_AGAIN ;break ; +case UDP_ENCAP_GTP0 : + ret =__skb_flow_dissect_gtp0 (skb, flow_dissector, + target_container, data, + p_ip_proto, &nhoff, hlen, flags); +break ; +case UDP_ENCAP_GTP1U : + ret =__skb_flow_dissect_gtp1u (skb, flow_dissector, + target_container, data, + p_ip_proto, &nhoff, hlen, flags); +break ;case UDP_ENCAP_FOU : *p_ip_proto = fou_protocol; ret =FLOW_DISSECT_RET_IPPROTO_AGAIN ;
Signature · 1 line
2.34.1
PATCH v2 12/12 flow_dissector: Add case in ipproto switch for NEXTHDR_NONE
In reply to Tom HerbertProtocol number 59 (no-next-header) means nothing follows the IP header, break out of the flow dissector loop on FLOW_DISSECT_RET_OUT_GOOD when encountered in a packet
--- net/core/flow_dissector.c | 3 +++ 1 file changed, 3 insertions(+)
net/core/flow_dissector.c +3 -0
@@ -1971,6 +1971,9 @@ bool __skb_flow_dissect(const struct net *net, fdret =FLOW_DISSECT_RET_OUT_GOOD ;break ; } +case NEXTHDR_NONE : + fdret =FLOW_DISSECT_RET_OUT_GOOD ; +break ;case IPPROTO_IPIP :if (flags &FLOW_DISSECTOR_F_STOP_BEFORE_ENCAP ) { fdret =FLOW_DISSECT_RET_OUT_GOOD ;
Signature · 1 line
2.34.1
Re: [PATCH net-next v2 12/12] flow_dissector: Add case in ipproto switch for NEXTHDR_NONE
Quoted 5 lines · Tom Herbert
Protocol number 59 (no-next-header) means nothing follows the IP header, break out of the flow dissector loop on
FLOW_DISSECT_RET_OUT_GOODwhen encountered in a packetSigned-off-by Tom Herbert <[email protected]>
Willem de Bruijn
maintainerQuoted 44 lines · Tom Herbert
Add support in
flow_dissectorfor dissecting into UDP encapsulations like VXLAN.__skb_flow_dissect_udpis called forIPPROTO_UDP. The flagFLOW_DISSECTOR_F_PARSE_UDP_ENCAPSenables parsing of UDP encapsulations. If the flag is set when parsing a UDP packet then a socket lookup is performed. The offset of the base network header, either an IPv4 or IPv6 header, is tracked and passed to__skb_flow_dissect_udpso that it can perform the socket lookup. If a socket is found and it's for a UDP encapsulation (encap_typeis set in the UDP socket) then a switch is performed on theencap_typevalue (cases are UDP_ENCAP_* values)Changes in the patch set:
- Unconstantify struct net argument in flowdis functions so we can call UDP socket lookup functions
- DissectETH_P_TEBin main flow dissector loop, moveETH_P_TEBcheck out of__skb_flow_dissect_greand process it in main loop
- AddUDP_ENCAPconstants for tipc, fou, gue, sctp, rxe, pfcp, wireguard, bareudp, vxlan,vxlan_gpe, geneve, and amt
- For the various UDP encapsulation protocols, Instead of just setting UDP tunnel encap type to 1, set it to the correspondingUDP_ENCAPconstant. This allows identify the encapsulation protocol for a UDP socket by theencap_type
- Add function__skb_flow_dissect_udpinflow_dissectorand call it for UDP packets. If a UDP encapsulation is present then the function returns eitherFLOW_DISSECT_RET_PROTO_AGAINorFLOW_DISSECT_RET_IPPROTO_AGAIN
- Add flagFLOW_DISSECTOR_F_PARSE_UDP_ENCAPSthat indicates UDP encapsulations should be dissected
- Add__skb_flow_dissect_vxlanwhich is called whenencap_typeisUDP_ENCAP_VXLANorUDP_ENCAP_VXLAN_GPE. Dissect VXLAN and return a next protocol and offset
- Add__skb_flow_dissect_fouwhich is called whenencap_typeisUDP_ENCAP_FOU. Dissect FOU and return a next protocol and offset
- Add support for ESP, L2TP, and SCTP in UDP in__skb_flow_dissect_udp. All we need to do is returnFLOW_DISSECT_RET_IPPROTO_AGAINand the corresponding IP protocol number
- Add__skb_flow_dissect_genevewhich is called whenencap_typeisUDP_ENCAP_GENEVE. Dissect geneve and return a next protocol and offset
- Add__skb_flow_dissect_guewhich is called whenencap_typeisUDP_ENCAP_GUE. Dissect gue and return a next protocol and offset
- Add__skb_flow_dissect_gtpwhich is called whenencap_typeisUDP_ENCAP_GTP. Dissect gtp and return a next protocol and offset
Quoted 2 lines
Tested: Verified fou, gue, vxlan, and geneve are properly dissected for IPv4 and IPv6 cases. This includes testing
ETH_P_TEBcase
On our conversation in v1 that this is manual:
Would be really nice to have some test coverage for flow dissection. We only have this for BPF flow dissection. This seems like a suitable candidate for KUNIT. Like gso_test_func. Don't mean to put you on the spot per se to add this coverage.
Quoted 49 lines · Willem de Bruijn
Quoted 44 lines · Tom Herbert
Add support in
flow_dissectorfor dissecting into UDP encapsulations like VXLAN.__skb_flow_dissect_udpis called forIPPROTO_UDP. The flagFLOW_DISSECTOR_F_PARSE_UDP_ENCAPSenables parsing of UDP encapsulations. If the flag is set when parsing a UDP packet then a socket lookup is performed. The offset of the base network header, either an IPv4 or IPv6 header, is tracked and passed to__skb_flow_dissect_udpso that it can perform the socket lookup. If a socket is found and it's for a UDP encapsulation (encap_typeis set in the UDP socket) then a switch is performed on theencap_typevalue (cases are UDP_ENCAP_* values)Changes in the patch set:
- Unconstantify struct net argument in flowdis functions so we can call UDP socket lookup functions
- DissectETH_P_TEBin main flow dissector loop, moveETH_P_TEBcheck out of__skb_flow_dissect_greand process it in main loop
- AddUDP_ENCAPconstants for tipc, fou, gue, sctp, rxe, pfcp, wireguard, bareudp, vxlan,vxlan_gpe, geneve, and amt
- For the various UDP encapsulation protocols, Instead of just setting UDP tunnel encap type to 1, set it to the correspondingUDP_ENCAPconstant. This allows identify the encapsulation protocol for a UDP socket by theencap_type
- Add function__skb_flow_dissect_udpinflow_dissectorand call it for UDP packets. If a UDP encapsulation is present then the function returns eitherFLOW_DISSECT_RET_PROTO_AGAINorFLOW_DISSECT_RET_IPPROTO_AGAIN
- Add flagFLOW_DISSECTOR_F_PARSE_UDP_ENCAPSthat indicates UDP encapsulations should be dissected
- Add__skb_flow_dissect_vxlanwhich is called whenencap_typeisUDP_ENCAP_VXLANorUDP_ENCAP_VXLAN_GPE. Dissect VXLAN and return a next protocol and offset
- Add__skb_flow_dissect_fouwhich is called whenencap_typeisUDP_ENCAP_FOU. Dissect FOU and return a next protocol and offset
- Add support for ESP, L2TP, and SCTP in UDP in__skb_flow_dissect_udp. All we need to do is returnFLOW_DISSECT_RET_IPPROTO_AGAINand the corresponding IP protocol number
- Add__skb_flow_dissect_genevewhich is called whenencap_typeisUDP_ENCAP_GENEVE. Dissect geneve and return a next protocol and offset
- Add__skb_flow_dissect_guewhich is called whenencap_typeisUDP_ENCAP_GUE. Dissect gue and return a next protocol and offset
- Add__skb_flow_dissect_gtpwhich is called whenencap_typeisUDP_ENCAP_GTP. Dissect gtp and return a next protocol and offsetQuoted 2 lines
Tested: Verified fou, gue, vxlan, and geneve are properly dissected for IPv4 and IPv6 cases. This includes testing
ETH_P_TEBcase
Quoted 6 lines
On our conversation in v1 that this is manual:
Would be really nice to have some test coverage for flow dissection. We only have this for BPF flow dissection. This seems like a suitable candidate for KUNIT. Like
gso_test_func. Don't mean to put you on the spot per se to add this coverage.
Sure. We'll add a KUNIT test for flow dissector (it sorely needs that!)
Tom