lib/igt_kms: add enum for link rate and lane count
Subsystems (2)
A message that is not in the archive (sent off-list or not yet received): [email protected]
PATCH 1/14 lib/igt_kms: add enum for link rate and lane count
add enums for link rate, lane count
--- lib/igt_kms.h | 23 +++++++++++++++++++++++ 1 file changed, 23 insertions(+)
lib/igt_kms.h +23 -0
@@ -258,6 +258,29 @@ enum intel_broadcast_rgb_mode {BROADCAST_RGB_16_235 }; +enum dp_link_rate { +DP_LINK_RATE_162000 =162000 , +DP_LINK_RATE_216000 =216000 , +DP_LINK_RATE_243000 =243000 , +DP_LINK_RATE_270000 =270000 , +DP_LINK_RATE_324000 =324000 , +DP_LINK_RATE_432000 =432000 , +DP_LINK_RATE_540000 =540000 , +DP_LINK_RATE_675000 =675000 , +DP_LINK_RATE_810000 =810000 , +DP_LINK_RATE_1000000 =1000000 , +DP_LINK_RATE_1350000 =1350000 , +DP_LINK_RATE_2000000 =2000000 +}; + +#define DP_MAX_LINK_RATE_COUNT 12 + +enum dp_lane_count { +DP_LANE_COUNT_1 =1 , +DP_LANE_COUNT_2 =2 , +DP_LANE_COUNT_4 =4 +}; +struct edid ; bool kmstest_force_connector(int fd, drmModeConnector *connector,
Signature · 1 line
2.34.1
Quoted 9 lines
-----Original Message-----
From: igt-dev <[email protected]> On Behalf Of Kunal Joshi
Sent: Monday, August 26, 2024 1:36 AM
To: [email protected]
Cc: Joshi, Kunal1 <[email protected]>
Subject: [PATCH i-g-t 01/14]lib/igt_kms: add enum for link rate and lane count
Quoted 3 lines
add enums for link rate, lane count
Signed-off-by Kunal Joshi <[email protected]>
LGTM.
Quoted 40 lines
--- lib/igt_kms.h | 23 +++++++++++++++++++++++ 1 file changed, 23 insertions(+)lib/igt_kms.h index 25ba50916..999921f9f renamed from lib/igt_kms.h +0
-0100644
lib/igt_kms.h +23
-1@@ -258,6 +258,29 @@ enum intel_broadcast_rgb_mode {BROADCAST_RGB_16_235 }; +enum dp_link_rate { +DP_LINK_RATE_162000 =162000 , +DP_LINK_RATE_216000 =216000 , +DP_LINK_RATE_243000 =243000 , +DP_LINK_RATE_270000 =270000 , +DP_LINK_RATE_324000 =324000 , +DP_LINK_RATE_432000 =432000 , +DP_LINK_RATE_540000 =540000 , +DP_LINK_RATE_675000 =675000 , +DP_LINK_RATE_810000 =810000 , +DP_LINK_RATE_1000000 =1000000 , +DP_LINK_RATE_1350000 =1350000 , +DP_LINK_RATE_2000000 =2000000 +}; + +#define DP_MAX_LINK_RATE_COUNT 12 + +enum dp_lane_count { +DP_LANE_COUNT_1 =1 , +DP_LANE_COUNT_2 =2 , +DP_LANE_COUNT_4 =4 +}; +struct edid ; bool kmstest_force_connector(int fd, drmModeConnector *connector, --2.34.1
Quoted 19 lines · Kunal Joshi
add enums for link rate, lane count
Signed-off-by Kunal Joshi <[email protected]>--- lib/igt_kms.h | 23 +++++++++++++++++++++++ 1 file changed, 23 insertions(+)lib/igt_kms.h +4
-0@@ -258,6 +258,29 @@ enum intel_broadcast_rgb_mode {BROADCAST_RGB_16_235 }; +enum dp_link_rate { +DP_LINK_RATE_162000 =162000 , +DP_LINK_RATE_216000 =216000 , +DP_LINK_RATE_243000 =243000 ,
lib/igt_kms.h enum intel_broadcast_rgb_mode { · line 274
Quoted 10 lines
lib/igt_kms.h +10
-0+DP_LINK_RATE_270000 =270000 , +DP_LINK_RATE_324000 =324000 , +DP_LINK_RATE_432000 =432000 , +DP_LINK_RATE_540000 =540000 , +DP_LINK_RATE_675000 =675000 , +DP_LINK_RATE_810000 =810000 , +DP_LINK_RATE_1000000 =1000000 , +DP_LINK_RATE_1350000 =1350000 , +DP_LINK_RATE_2000000 =2000000 +};
Imo, there is no point to define enums for the rates or lane counts.
lib/igt_kms.h enum intel_broadcast_rgb_mode { · line 276
Quoted 2 lines
lib/igt_kms.h +2
-0+ +#define DP_MAX_LINK_RATE_COUNT 12
This is not used.
Quoted 13 lines
lib/igt_kms.h +7
-0+ +enum dp_lane_count { +DP_LANE_COUNT_1 =1 , +DP_LANE_COUNT_2 =2 , +DP_LANE_COUNT_4 =4 +}; +struct edid ; bool kmstest_force_connector(int fd, drmModeConnector *connector,Signature · 1 line
2.34.1
Hello Imre,
-----Original Message-----
From: Deak, Imre <[email protected]>
Sent: Tuesday, September 3, 2024 6:23 PM
To: Joshi, Kunal1 <[email protected]>
Cc: [email protected]
Subject: Re: [PATCH i-g-t 01/14] lib/igt_kms: add enum for link rate and lane count
Quoted 19 lines · Kunal Joshi
add enums for link rate, lane count
Signed-off-by Kunal Joshi <[email protected]>--- lib/igt_kms.h | 23 +++++++++++++++++++++++ 1 file changed, 23 insertions(+)lib/igt_kms.h index 25ba50916..999921f9f renamed from lib/igt_kms.h +0
-0100644
lib/igt_kms.h +4
-0@@ -258,6 +258,29 @@ enum intel_broadcast_rgb_mode {BROADCAST_RGB_16_235 }; +enum dp_link_rate { +DP_LINK_RATE_162000 =162000 , +DP_LINK_RATE_216000 =216000 , +DP_LINK_RATE_243000 =243000 ,
lib/igt_kms.h enum intel_broadcast_rgb_mode { · line 274
Quoted 10 lines
lib/igt_kms.h +10
-0+DP_LINK_RATE_270000 =270000 , +DP_LINK_RATE_324000 =324000 , +DP_LINK_RATE_432000 =432000 , +DP_LINK_RATE_540000 =540000 , +DP_LINK_RATE_675000 =675000 , +DP_LINK_RATE_810000 =810000 , +DP_LINK_RATE_1000000 =1000000 , +DP_LINK_RATE_1350000 =1350000 , +DP_LINK_RATE_2000000 =2000000 +};
Imo, there is no point to define enums for the rates or lane counts.
----------------------------------------------------------------------------------------------
Sure, will remove this.
lib/igt_kms.h enum intel_broadcast_rgb_mode { · line 276
Quoted 2 lines
lib/igt_kms.h +2
-0+ +#define DP_MAX_LINK_RATE_COUNT 12
This is not used.
----------------------------------------------------------------------------------------------
This too.
Quoted 11 lines
lib/igt_kms.h +7
-1+ +enum dp_lane_count { +DP_LANE_COUNT_1 =1 , +DP_LANE_COUNT_2 =2 , +DP_LANE_COUNT_4 =4 +}; +struct edid ; bool kmstest_force_connector(int fd, drmModeConnector *connector, --
Quoted 2 lines
2.34.1
Thanks and Regards
Kunal Joshi
PATCH 2/14 lib/igt_kms: add helper to get current link rate/ lane count for connector
In reply to a message not in the archivei915_dp_force_(lane_count/link_rate) debugfs files expoose current link rate/lane count for connector.add helper to get current link rate/ lane count for connector
--- lib/igt_kms.c | 58 +++++++++++++++++++++++++++++++++++++++++++++++++++ lib/igt_kms.h | 2 ++ 2 files changed, 60 insertions(+)
lib/igt_kms.c +58 -0
@@ -6705,3 +6705,61 @@ int get_num_scalers(igt_display_t *display, enum pipe pipe)return num_scalers; } + +/** +* igt_get_dp_link_rate_set_for_output: +* @drm_fd: A drm file descriptor +* @output: Target output +* +* Returns: Link rate set for the output. +*/ +enum dp_link_rate igt_get_dp_link_rate_set_for_output (int drm_fd,igt_output_t *output) +{ +char buf[512 ]; +int dir, res; +int link_rate; + +igt_require_f (output->name,"Invalid output" ); + dir =igt_debugfs_connector_dir (drm_fd, output->name,O_RDONLY ); +igt_assert_f (dir >=0 ,"Failed to open debugfs dir for connector %s\n" , +igt_output_name (output)); + res =igt_debugfs_simple_read (dir,"i915_dp_force_link_rate" , buf,sizeof (buf)); +close (dir); +igt_require (res >0 ); + +if (strstr (buf,"[auto]" )) +igt_assert (sscanf (strstr (buf,"*" ) -6 ,"%d" , &link_rate) ==1 ); +else +igt_assert (sscanf (strstr (buf,"[" ) +1 ,"%d" , &link_rate) ==1 ); + +return link_rate; +} + +/** +* igt_get_dp_lane_count_set_for_output: +* @drm_fd: A drm file descriptor +* @output: Target output +* +* Returns: Lane count set for the output. +*/ +enum dp_lane_count igt_get_dp_lane_count_set_for_output (int drm_fd,igt_output_t *output) +{ +char buf[512 ]; +int dir, res; +int lane_count; + +igt_require_f (output->name,"Invalid output" ); + dir =igt_debugfs_connector_dir (drm_fd, output->name,O_RDONLY ); +igt_assert_f (dir >=0 ,"Failed to open debugfs dir for connector %s\n" , +igt_output_name (output)); + res =igt_debugfs_simple_read (dir,"i915_dp_force_lane_count" , buf,sizeof (buf)); +close (dir); +igt_require (res >0 ); + +if (strstr (buf,"[auto]" )) +igt_assert (sscanf (strstr (buf,"*" ) -2 ,"%d" , &lane_count) ==1 ); +else +igt_assert (sscanf (strstr (buf,"[" ) +1 ,"%d" , &lane_count) ==1 ); + +return lane_count; +}
lib/igt_kms.h +2 -0
@@ -1247,5 +1247,7 @@ bool intel_pipe_output_combo_valid(igt_display_t *display);bool igt_check_output_is_dp_mst (igt_output_t *output);int igt_get_dp_mst_connector_id (igt_output_t *output);int get_num_scalers (igt_display_t *display,enum pipe pipe); +enum dp_link_rate igt_get_dp_link_rate_set_for_output (int drm_fd,igt_output_t *output); +enum dp_lane_count igt_get_dp_lane_count_set_for_output (int drm_fd,igt_output_t *output);#endif /* __IGT_KMS_H__ */
Signature · 1 line
2.34.1
RE: [PATCH i-g-t 02/14] lib/igt_kms: add helper to get current link rate/ lane count for connector
Quoted 10 lines
-----Original Message-----
From: igt-dev <[email protected]> On Behalf Of Kunal Joshi
Sent: Monday, August 26, 2024 1:36 AM
To: [email protected]
Cc: Joshi, Kunal1 <[email protected]>
Subject: [PATCH i-g-t 02/14]lib/igt_kms: add helper to get current link rate/ lane count for connector
i915_dp_force_(lane_count/link_rate)debugfs files expoose current link
Fix typo /expoose /Expose
Quoted 101 lines
rate/lane count for connector.add helper to get current link rate/ lane count for connector
Signed-off-by Kunal Joshi <[email protected]>--- lib/igt_kms.c | 58 +++++++++++++++++++++++++++++++++++++++++++++++++++ lib/igt_kms.h | 2 ++ 2 files changed, 60 insertions(+)lib/igt_kms.c index dd530dbab..4ef7f4d7f renamed from lib/igt_kms.c +0
-0100644
lib/igt_kms.c +16
-0@@ -6705,3 +6705,61 @@ int get_num_scalers(igt_display_t *display, enum pipe pipe)return num_scalers; } + +/** +* igt_get_dp_link_rate_set_for_output: +* @drm_fd: A drm file descriptor +* @output: Target output +* +* Returns: Link rate set for the output. +*/ +enum dp_link_rate igt_get_dp_link_rate_set_for_output (int drm_fd, +igt_output_t *output) { +char buf[512 ]; +int dir, res; +int link_rate; + +igt_require_f (output->name,"Invalid output" ); + dir = igt_debugfs_connector_dir(drm_fd, output->name,
O_RDONLY);lib/igt_kms.c +1
-0+ igt_assert_f(dir >= 0, "Failed to open debugfs dir for connector%s\n",
lib/igt_kms.c +2
-0+ igt_output_name(output)); + res = igt_debugfs_simple_read(dir, "i915_dp_force_link_rate", buf,sizeof(buf));
lib/igt_kms.c +26
-0+close (dir); +igt_require (res >0 ); + +if (strstr (buf,"[auto]" )) +igt_assert (sscanf (strstr (buf,"*" ) -6 ,"%d" , &link_rate) ==1 ); +else +igt_assert (sscanf (strstr (buf,"[" ) +1 ,"%d" , &link_rate) ==1 ); + +return link_rate; +} + +/** +* igt_get_dp_lane_count_set_for_output: +* @drm_fd: A drm file descriptor +* @output: Target output +* +* Returns: Lane count set for the output. +*/ +enum dp_lane_count igt_get_dp_lane_count_set_for_output (int drm_fd, +igt_output_t *output) { +char buf[512 ]; +int dir, res; +int lane_count; + +igt_require_f (output->name,"Invalid output" ); + dir = igt_debugfs_connector_dir(drm_fd, output->name,
O_RDONLY);lib/igt_kms.c +1
-0+ igt_assert_f(dir >= 0, "Failed to open debugfs dir for connector%s\n",
lib/igt_kms.c +2
-0+ igt_output_name(output)); + res = igt_debugfs_simple_read(dir, "i915_dp_force_lane_count", buf,sizeof(buf));
lib/igt_kms.c +5
-0+close (dir); +igt_require (res >0 ); + +if (strstr (buf,"[auto]" )) + igt_assert(sscanf(strstr(buf, "*") - 2, "%d", &lane_count) ==1);
lib/igt_kms.c +2
-0+else + igt_assert(sscanf(strstr(buf, "[") + 1, "%d", &lane_count) ==1);
lib/igt_kms.c +3
-0+ +return lane_count; +}lib/igt_kms.h index 999921f9f..9d42a2b35 renamed from lib/igt_kms.h +0
-0100644
lib/igt_kms.h +0
-0@@ -1247,5 +1247,7 @@ bool
intel_pipe_output_combo_valid(igt_display_t *display); booligt_check_output_is_dp_mst(igt_output_t *output); intigt_get_dp_mst_connector_id(igt_output_t *output); intget_num_scalers(igt_display_t *display, enum pipe pipe);lib/igt_kms.h +3
-1+enum dp_link_rate igt_get_dp_link_rate_set_for_output (int drm_fd, +igt_output_t *output);enum dp_lane_count +igt_get_dp_lane_count_set_for_output (int drm_fd,igt_output_t *output);#endif /* __IGT_KMS_H__ */ --2.34.1
Re: [PATCH i-g-t 02/14] lib/igt_kms: add helper to get current link rate/ lane count for connector
In reply to Kunal JoshiQuoted 23 lines · Kunal Joshi
i915_dp_force_(lane_count/link_rate)debugfs files expoose current link rate/lane count for connector.add helper to get current link rate/ lane count for connectorSigned-off-by Kunal Joshi <[email protected]>--- lib/igt_kms.c | 58 +++++++++++++++++++++++++++++++++++++++++++++++++++ lib/igt_kms.h | 2 ++ 2 files changed, 60 insertions(+)lib/igt_kms.c +5
-0@@ -6705,3 +6705,61 @@ int get_num_scalers(igt_display_t *display, enum pipe pipe)return num_scalers; } + +/** +* igt_get_dp_link_rate_set_for_output: +* @drm_fd: A drm file descriptor +* @output: Target output
lib/igt_kms.c int get_num_scalers(igt_display_t *display, enum pipe pipe) · line 6722
Quoted 10 lines
lib/igt_kms.c +10
-0+* +* Returns: Link rate set for the output. +*/ +enum dp_link_rate igt_get_dp_link_rate_set_for_output (int drm_fd,igt_output_t *output) +{ +char buf[512 ]; +int dir, res; +int link_rate; + +igt_require_f (output->name,"Invalid output" );
It's strange to check this in these library functions. I'd think the caller should make sure already that it's a valid output, how can it become invalid in the test this patchset adds?
lib/igt_kms.c int get_num_scalers(igt_display_t *display, enum pipe pipe) · line 6728
Quoted 6 lines
lib/igt_kms.c +6
-0+ dir =igt_debugfs_connector_dir (drm_fd, output->name,O_RDONLY ); +igt_assert_f (dir >=0 ,"Failed to open debugfs dir for connector %s\n" , +igt_output_name (output)); + res =igt_debugfs_simple_read (dir,"i915_dp_force_link_rate" , buf,sizeof (buf)); +close (dir); +igt_require (res >0 );
res == 0 is also valid.
lib/igt_kms.c int get_num_scalers(igt_display_t *display, enum pipe pipe) · line 6733
Quoted 5 lines
lib/igt_kms.c +5
-0+ +if (strstr (buf,"[auto]" )) +igt_assert (sscanf (strstr (buf,"*" ) -6 ,"%d" , &link_rate) ==1 ); +else +igt_assert (sscanf (strstr (buf,"[" ) +1 ,"%d" , &link_rate) ==1 );
I suppose this should return the rate used for an active output. It should be the one with the '*' marker, regardless if the rate is getting selected automatically or forced. In case it's forced the selected rate could be different than the target with the '[]' markers (if the sink doesn't support the target rate). So I think this should return the one marked with '*' or an error if such is not found (when the output is disabled).
Quoted 19 lines
lib/igt_kms.c +19
-0+ +return link_rate; +} + +/** +* igt_get_dp_lane_count_set_for_output: +* @drm_fd: A drm file descriptor +* @output: Target output +* +* Returns: Lane count set for the output. +*/ +enum dp_lane_count igt_get_dp_lane_count_set_for_output (int drm_fd,igt_output_t *output) +{ +char buf[512 ]; +int dir, res; +int lane_count; + +igt_require_f (output->name,"Invalid output" ); + dir =igt_debugfs_connector_dir (drm_fd, output->name,O_RDONLY );
lib/igt_kms.c int get_num_scalers(igt_display_t *display, enum pipe pipe) · line 6762
Quoted 10 lines
lib/igt_kms.c +10
-0+igt_assert_f (dir >=0 ,"Failed to open debugfs dir for connector %s\n" , +igt_output_name (output)); + res =igt_debugfs_simple_read (dir,"i915_dp_force_lane_count" , buf,sizeof (buf)); +close (dir); +igt_require (res >0 ); + +if (strstr (buf,"[auto]" )) +igt_assert (sscanf (strstr (buf,"*" ) -2 ,"%d" , &lane_count) ==1 ); +else +igt_assert (sscanf (strstr (buf,"[" ) +1 ,"%d" , &lane_count) ==1 );
The same as above apply in this function too.
Quoted 18 lines
lib/igt_kms.c +3
-0+ +return lane_count; +}lib/igt_kms.h +2
-0@@ -1247,5 +1247,7 @@ bool intel_pipe_output_combo_valid(igt_display_t *display);bool igt_check_output_is_dp_mst (igt_output_t *output);int igt_get_dp_mst_connector_id (igt_output_t *output);int get_num_scalers (igt_display_t *display,enum pipe pipe); +enum dp_link_rate igt_get_dp_link_rate_set_for_output (int drm_fd,igt_output_t *output); +enum dp_lane_count igt_get_dp_lane_count_set_for_output (int drm_fd,igt_output_t *output);#endif /* __IGT_KMS_H__ */ Signature · 1 line
2.34.1
RE: [PATCH i-g-t 02/14] lib/igt_kms: add helper to get current link rate/ lane count for connector
Hello Imre,
-----Original Message-----
From: Deak, Imre <[email protected]>
Sent: Tuesday, September 3, 2024 6:39 PM
To: Joshi, Kunal1 <[email protected]>
Cc: [email protected]
Subject: Re: [PATCH i-g-t 02/14] lib/igt_kms: add helper to get current link rate/ lane count for connector
Quoted 25 lines · Kunal Joshi
i915_dp_force_(lane_count/link_rate)debugfs files expoose current link rate/lane count for connector.add helper to get current link rate/ lane count for connectorSigned-off-by Kunal Joshi <[email protected]>--- lib/igt_kms.c | 58 +++++++++++++++++++++++++++++++++++++++++++++++++++ lib/igt_kms.h | 2 ++ 2 files changed, 60 insertions(+)lib/igt_kms.c index dd530dbab..4ef7f4d7f renamed from lib/igt_kms.c +0
-0100644
lib/igt_kms.c +5
-0@@ -6705,3 +6705,61 @@ int get_num_scalers(igt_display_t *display, enum pipe pipe)return num_scalers; } + +/** +* igt_get_dp_link_rate_set_for_output: +* @drm_fd: A drm file descriptor +* @output: Target output
lib/igt_kms.c int get_num_scalers(igt_display_t *display, · line 6722
Quoted 10 lines
lib/igt_kms.c +10
-0+* +* Returns: Link rate set for the output. +*/ +enum dp_link_rate igt_get_dp_link_rate_set_for_output (int drm_fd, +igt_output_t *output) { +char buf[512 ]; +int dir, res; +int link_rate; + +igt_require_f (output->name,"Invalid output" );
It's strange to check this in these library functions. I'd think the caller should make sure already that it's a valid output, how can it become invalid in the test this patchset adds?
----------------------------------------------------------------------------------------------
Was extra precautious that some using this API's may pass NULL in case,
but will remove this check in the next revision
lib/igt_kms.c int get_num_scalers(igt_display_t *display, enum pipe pipe) · line 6728
Quoted 6 lines
lib/igt_kms.c +6
-0+ dir =igt_debugfs_connector_dir (drm_fd, output->name,O_RDONLY ); +igt_assert_f (dir >=0 ,"Failed to open debugfs dir for connector %s\n" , +igt_output_name (output)); + res =igt_debugfs_simple_read (dir,"i915_dp_force_link_rate" , buf,sizeof (buf)); +close (dir); +igt_require (res >0 );
res == 0 is also valid.
----------------------------------------------------------------------------------------------
Thanks for the catch, will fix it in next revision.
lib/igt_kms.c int get_num_scalers(igt_display_t *display, enum pipe pipe) · line 6733
Quoted 5 lines
lib/igt_kms.c +5
-0+ +if (strstr (buf,"[auto]" )) +igt_assert (sscanf (strstr (buf,"*" ) -6 ,"%d" , &link_rate) ==1 ); +else +igt_assert (sscanf (strstr (buf,"[" ) +1 ,"%d" , &link_rate) ==1 );
I suppose this should return the rate used for an active output. It should be the one with the '*' marker, regardless if the rate is getting selected automatically or forced. In case it's forced the selected rate could be different than the target with the '[]' markers (if the sink doesn't support the target rate). So I think this should return the one marked with '*' or an error if such is not found (when the output is disabled).
----------------------------------------------------------------------------------------------
Ok thanks for clearing, my understanding was a bit different.
Will modify as suggested in next revision.
Quoted 19 lines
lib/igt_kms.c +19
-0+ +return link_rate; +} + +/** +* igt_get_dp_lane_count_set_for_output: +* @drm_fd: A drm file descriptor +* @output: Target output +* +* Returns: Lane count set for the output. +*/ +enum dp_lane_count igt_get_dp_lane_count_set_for_output (int drm_fd, +igt_output_t *output) { +char buf[512 ]; +int dir, res; +int lane_count; + +igt_require_f (output->name,"Invalid output" ); + dir =igt_debugfs_connector_dir (drm_fd, output->name,O_RDONLY );
lib/igt_kms.c int get_num_scalers(igt_display_t *display, enum pipe pipe) · line 6762
Quoted 10 lines
lib/igt_kms.c +10
-0+igt_assert_f (dir >=0 ,"Failed to open debugfs dir for connector %s\n" , +igt_output_name (output)); + res =igt_debugfs_simple_read (dir,"i915_dp_force_lane_count" , buf,sizeof (buf)); +close (dir); +igt_require (res >0 ); + +if (strstr (buf,"[auto]" )) +igt_assert (sscanf (strstr (buf,"*" ) -2 ,"%d" , &lane_count) ==1 ); +else +igt_assert (sscanf (strstr (buf,"[" ) +1 ,"%d" , &lane_count) ==1 );
The same as above apply in this function too.
----------------------------------------------------------------------------------------------
Sure
Thanks and Regards
Kunal Joshi
Quoted 20 lines
lib/igt_kms.c +3
-0+ +return lane_count; +}lib/igt_kms.h index 999921f9f..9d42a2b35 renamed from lib/igt_kms.h +0
-0100644
lib/igt_kms.h +0
-0@@ -1247,5 +1247,7 @@ bool intel_pipe_output_combo_valid(igt_display_t *display); bool igt_check_output_is_dp_mst(igt_output_t *output);int
igt_get_dp_mst_connector_id(igt_output_t *output); intget_num_scalers(igt_display_t *display, enum pipe pipe);lib/igt_kms.h +4
-1+enum dp_link_rate igt_get_dp_link_rate_set_for_output (int drm_fd, +igt_output_t *output);enum dp_lane_count +igt_get_dp_lane_count_set_for_output (int drm_fd,igt_output_t +*output);#endif /* __IGT_KMS_H__ */ --2.34.1
PATCH 3/14 lib/igt_kms: add function to get max link rate/lane count
In reply to a message not in the archivei915_dp_max_(lane_count/link_rate) debugfs files expose max link rate/lane count for connector.add function to get max link rate/lane lane count for connector
--- lib/igt_kms.c | 58 +++++++++++++++++++++++++++++++++++++++++++++++++++ lib/igt_kms.h | 2 ++ 2 files changed, 60 insertions(+)
lib/igt_kms.c +58 -0
@@ -6763,3 +6763,61 @@ enum dp_lane_count igt_get_dp_lane_count_set_for_output(int drm_fd, igt_output_treturn lane_count; } + +/** +* igt_get_dp_max_link_rate: +* @drm_fd: A drm file descriptor +* @output: The output to query +* +* Get the max link rate supported by the sink. +* +* Returns: Max link rate supported by the sink. +*/ +enum dp_link_rate igt_get_dp_max_link_rate (int drm_fd,igt_output_t *output) +{ +char buf[512 ]; +int dir, res; +int max_link_rate; + +igt_require_f (output->name,"Invalid output" ); + dir =igt_debugfs_connector_dir (drm_fd, output->name,O_DIRECTORY ); +igt_assert_f (dir >=0 ,"Failed to open debugfs dir for connector %s\n" , +igt_output_name (output)); + res =igt_debugfs_simple_read (dir,"i915_dp_max_link_rate" , + buf,sizeof (buf)); +close (dir); +igt_require_f (res >0 ,"Couldn't read i915_dp_max_link_rate" ); + +igt_assert (sscanf (buf,"%d" , &max_link_rate) ==1 ); + +return max_link_rate; +} + +/** +* igt_get_dp_max_lane_count: +* @drm_fd: A drm file descriptor +* @output: The output to query +* +* Get the max lane count supported by the sink. +* +* Returns: Max lane count supported by the sink. +*/ +enum dp_lane_count igt_get_dp_max_lane_count (int drm_fd,igt_output_t *output) +{ +char buf[512 ]; +int dir, res; +int max_lane_count; + +igt_require_f (output->name,"Invalid output" ); + dir =igt_debugfs_connector_dir (drm_fd, output->name,O_RDONLY ); +igt_assert_f (dir >=0 ,"Failed to open debugfs dir for connector %s\n" , +igt_output_name (output)); + res =igt_debugfs_simple_read (dir,"i915_dp_max_lane_count" , + buf,sizeof (buf)); +close (dir); +igt_require (res >0 ); + +igt_assert (sscanf (buf,"%d" , &max_lane_count) ==1 ); + +return max_lane_count; +}
lib/igt_kms.h +2 -0
@@ -1249,5 +1249,7 @@ int igt_get_dp_mst_connector_id(igt_output_t *output);int get_num_scalers (igt_display_t *display,enum pipe pipe);enum dp_link_rate igt_get_dp_link_rate_set_for_output (int drm_fd,igt_output_t *output);enum dp_lane_count igt_get_dp_lane_count_set_for_output (int drm_fd,igt_output_t *output); +enum dp_link_rate igt_get_dp_max_link_rate (int drm_fd,igt_output_t *output); +enum dp_lane_count igt_get_dp_max_lane_count (int drm_fd,igt_output_t *output);#endif /* __IGT_KMS_H__ */
Signature · 1 line
2.34.1
RE: [PATCH i-g-t 03/14] lib/igt_kms: add function to get max link rate/lane count
Quoted 26 lines
-----Original Message-----
From: igt-dev <[email protected]> On Behalf Of Kunal Joshi
Sent: Monday, August 26, 2024 1:36 AM
To: [email protected]
Cc: Joshi, Kunal1 <[email protected]>
Subject: [PATCH i-g-t 03/14]lib/igt_kms: add function to get max link rate/lane count
i915_dp_max_(lane_count/link_rate)debugfs files expose max link rate/lane count for connector.add function to get max link rate/lane lane count for connectorSigned-off-by Kunal Joshi <[email protected]>--- lib/igt_kms.c | 58 +++++++++++++++++++++++++++++++++++++++++++++++++++ lib/igt_kms.h | 2 ++ 2 files changed, 60 insertions(+)lib/igt_kms.c +0
-0@@ -6763,3 +6763,61 @@ enum dp_lane_countigt_get_dp_lane_count_set_for_output(int
drm_fd,igt_output_t
lib/igt_kms.c enum dp_lane_count igt_get_dp_lane_count_set_for_output(int drm_fd, igt_output_t · line 6766
Quoted 3 lines
lib/igt_kms.c +1
-0return lane_count; } +
Is it possible to reuse the function igt_get_dp_link_rate_set_for_output & igt_get_dp_lane_count_set_for_output To get max rate using some logic.
Quoted 80 lines
lib/igt_kms.c +17
-0+/** +* igt_get_dp_max_link_rate: +* @drm_fd: A drm file descriptor +* @output: The output to query +* +* Get the max link rate supported by the sink. +* +* Returns: Max link rate supported by the sink. +*/ +enum dp_link_rate igt_get_dp_max_link_rate (int drm_fd,igt_output_t +*output) { +char buf[512 ]; +int dir, res; +int max_link_rate; + +igt_require_f (output->name,"Invalid output" ); + dir = igt_debugfs_connector_dir(drm_fd, output->name,
O_DIRECTORY);lib/igt_kms.c +1
-0+ igt_assert_f(dir >= 0, "Failed to open debugfs dir for connector%s\n",
lib/igt_kms.c +3
-0+ igt_output_name(output)); + res = igt_debugfs_simple_read(dir, "i915_dp_max_link_rate", + buf,sizeof(buf));
lib/igt_kms.c +18
-0+close (dir); +igt_require_f (res >0 ,"Couldn't read i915_dp_max_link_rate" ); + +igt_assert (sscanf (buf,"%d" , &max_link_rate) ==1 ); + +return max_link_rate; +} + +/** +* igt_get_dp_max_lane_count: +* @drm_fd: A drm file descriptor +* @output: The output to query +* +* Get the max lane count supported by the sink. +* +* Returns: Max lane count supported by the sink. +*/ +enum dp_lane_count igt_get_dp_max_lane_count(int drm_fd,
igt_output_tlib/igt_kms.c +7
-0+*output) { +char buf[512 ]; +int dir, res; +int max_lane_count; + +igt_require_f (output->name,"Invalid output" ); + dir = igt_debugfs_connector_dir(drm_fd, output->name,
O_RDONLY);lib/igt_kms.c +1
-0+ igt_assert_f(dir >= 0, "Failed to open debugfs dir for connector%s\n",
lib/igt_kms.c +3
-0+ igt_output_name(output)); + res = igt_debugfs_simple_read(dir, "i915_dp_max_lane_count", + buf,sizeof(buf));
lib/igt_kms.c +7
-0+close (dir); +igt_require (res >0 ); + +igt_assert (sscanf (buf,"%d" , &max_lane_count) ==1 ); + +return max_lane_count; +}lib/igt_kms.h index 9d42a2b35..1d3226c5c renamed from lib/igt_kms.h +0
-0100644
lib/igt_kms.h +0
-0@@ -1249,5 +1249,7 @@ int igt_get_dp_mst_connector_id(igt_output_t *output); int get_num_scalers(igt_display_t *display, enum pipe pipe); enum dp_link_rate igt_get_dp_link_rate_set_for_output(int drm_fd,
igt_output_t*output); enumdp_lane_countigt_get_dp_lane_count_set_for_output(int drm_fd, igt_output_t *output);lib/igt_kms.h +3
-1+enum dp_link_rate igt_get_dp_max_link_rate (int drm_fd,igt_output_t +*output);enum dp_lane_count igt_get_dp_max_lane_count (int drm_fd, +igt_output_t *output);#endif /* __IGT_KMS_H__ */ --2.34.1
Re: [PATCH i-g-t 03/14] lib/igt_kms: add function to get max link rate/lane count
In reply to Kunal JoshiQuoted 37 lines · Kunal Joshi
i915_dp_max_(lane_count/link_rate)debugfs files expose max link rate/lane count for connector.add function to get max link rate/lane lane count for connectorSigned-off-by Kunal Joshi <[email protected]>--- lib/igt_kms.c | 58 +++++++++++++++++++++++++++++++++++++++++++++++++++ lib/igt_kms.h | 2 ++ 2 files changed, 60 insertions(+)lib/igt_kms.c +19
-0@@ -6763,3 +6763,61 @@ enum dp_lane_count igt_get_dp_lane_count_set_for_output(int drm_fd, igt_output_treturn lane_count; } + +/** +* igt_get_dp_max_link_rate: +* @drm_fd: A drm file descriptor +* @output: The output to query +* +* Get the max link rate supported by the sink. +* +* Returns: Max link rate supported by the sink. +*/ +enum dp_link_rate igt_get_dp_max_link_rate (int drm_fd,igt_output_t *output) +{ +char buf[512 ]; +int dir, res; +int max_link_rate; + +igt_require_f (output->name,"Invalid output" ); + dir =igt_debugfs_connector_dir (drm_fd, output->name,O_DIRECTORY ); + igt_assert_f(dir >= 0, "Failed to open debugfs dir for connector %s\n",
lib/igt_kms.c enum dp_lane_count igt_get_dp_lane_count_set_for_output(int drm_fd, igt_output_t · line 6794
Quoted 10 lines
lib/igt_kms.c +10
-0+ igt_output_name(output)); + res =igt_debugfs_simple_read (dir,"i915_dp_max_link_rate" , + buf,sizeof (buf)); +close (dir); +igt_require_f (res >0 ,"Couldn't read i915_dp_max_link_rate" ); + +igt_assert (sscanf (buf,"%d" , &max_link_rate) ==1 ); + +return max_link_rate; +}
The comments from the previous patch apply here too. This makes me wonder if it'd make more sense to add all these DP link training debugfs entries from one patch.
Quoted 44 lines
lib/igt_kms.c +29
-0+ +/** +* igt_get_dp_max_lane_count: +* @drm_fd: A drm file descriptor +* @output: The output to query +* +* Get the max lane count supported by the sink. +* +* Returns: Max lane count supported by the sink. +*/ +enum dp_lane_count igt_get_dp_max_lane_count (int drm_fd,igt_output_t *output) +{ +char buf[512 ]; +int dir, res; +int max_lane_count; + +igt_require_f (output->name,"Invalid output" ); + dir =igt_debugfs_connector_dir (drm_fd, output->name,O_RDONLY ); +igt_assert_f (dir >=0 ,"Failed to open debugfs dir for connector %s\n" , +igt_output_name (output)); + res =igt_debugfs_simple_read (dir,"i915_dp_max_lane_count" , + buf,sizeof (buf)); +close (dir); +igt_require (res >0 ); + +igt_assert (sscanf (buf,"%d" , &max_lane_count) ==1 ); + +return max_lane_count; +}lib/igt_kms.h +2
-0@@ -1249,5 +1249,7 @@ int igt_get_dp_mst_connector_id(igt_output_t *output);int get_num_scalers (igt_display_t *display,enum pipe pipe);enum dp_link_rate igt_get_dp_link_rate_set_for_output (int drm_fd,igt_output_t *output);enum dp_lane_count igt_get_dp_lane_count_set_for_output (int drm_fd,igt_output_t *output); +enum dp_link_rate igt_get_dp_max_link_rate (int drm_fd,igt_output_t *output); +enum dp_lane_count igt_get_dp_max_lane_count (int drm_fd,igt_output_t *output);#endif /* __IGT_KMS_H__ */ Signature · 1 line
2.34.1
RE: [PATCH i-g-t 03/14] lib/igt_kms: add function to get max link rate/lane count
Hello Imre,
-----Original Message-----
From: Deak, Imre <[email protected]>
Sent: Tuesday, September 3, 2024 6:42 PM
To: Joshi, Kunal1 <[email protected]>
Cc: [email protected]
Subject: Re: [PATCH i-g-t 03/14] lib/igt_kms: add function to get max link rate/lane count
Quoted 39 lines · Kunal Joshi
i915_dp_max_(lane_count/link_rate)debugfs files expose max link rate/lane count for connector.add function to get max link rate/lane lane count for connectorSigned-off-by Kunal Joshi <[email protected]>--- lib/igt_kms.c | 58 +++++++++++++++++++++++++++++++++++++++++++++++++++ lib/igt_kms.h | 2 ++ 2 files changed, 60 insertions(+)lib/igt_kms.c index 4ef7f4d7f..21ea8550c renamed from lib/igt_kms.c +0
-0100644
lib/igt_kms.c +0
-0@@ -6763,3 +6763,61 @@ enum dp_lane_countigt_get_dp_lane_count_set_for_output(int
drm_fd,igt_output_tlib/igt_kms.c +19
-0return lane_count; } + +/** +* igt_get_dp_max_link_rate: +* @drm_fd: A drm file descriptor +* @output: The output to query +* +* Get the max link rate supported by the sink. +* +* Returns: Max link rate supported by the sink. +*/ +enum dp_link_rate igt_get_dp_max_link_rate (int drm_fd,igt_output_t +*output) { +char buf[512 ]; +int dir, res; +int max_link_rate; + +igt_require_f (output->name,"Invalid output" ); + dir =igt_debugfs_connector_dir (drm_fd, output->name,O_DIRECTORY ); + igt_assert_f(dir >= 0, "Failed to open debugfs dir for connector %s\n",
lib/igt_kms.c enum dp_lane_count igt_get_dp_lane_count_set_for_output(int drm_fd, igt_output_t · line 6794
Quoted 10 lines
lib/igt_kms.c +10
-0+ igt_output_name(output)); + res =igt_debugfs_simple_read (dir,"i915_dp_max_link_rate" , + buf,sizeof (buf)); +close (dir); +igt_require_f (res >0 ,"Couldn't read i915_dp_max_link_rate" ); + +igt_assert (sscanf (buf,"%d" , &max_link_rate) ==1 ); + +return max_link_rate; +}
The comments from the previous patch apply here too. This makes me wonder if it'd make more sense to add all these DP link training debugfs entries from one patch.
----------------------------------------------------------------------------------------------
Ok sure let me combine all in 1
Thanks and Regards
Kunal Joshi
Quoted 47 lines
lib/igt_kms.c +29
-0+ +/** +* igt_get_dp_max_lane_count: +* @drm_fd: A drm file descriptor +* @output: The output to query +* +* Get the max lane count supported by the sink. +* +* Returns: Max lane count supported by the sink. +*/ +enum dp_lane_count igt_get_dp_max_lane_count (int drm_fd,igt_output_t +*output) { +char buf[512 ]; +int dir, res; +int max_lane_count; + +igt_require_f (output->name,"Invalid output" ); + dir =igt_debugfs_connector_dir (drm_fd, output->name,O_RDONLY ); +igt_assert_f (dir >=0 ,"Failed to open debugfs dir for connector %s\n" , +igt_output_name (output)); + res =igt_debugfs_simple_read (dir,"i915_dp_max_lane_count" , + buf,sizeof (buf)); +close (dir); +igt_require (res >0 ); + +igt_assert (sscanf (buf,"%d" , &max_lane_count) ==1 ); + +return max_lane_count; +}lib/igt_kms.h index 9d42a2b35..1d3226c5c renamed from lib/igt_kms.h +0
-0100644
lib/igt_kms.h +0
-0@@ -1249,5 +1249,7 @@ int igt_get_dp_mst_connector_id(igt_output_t *output); int get_num_scalers(igt_display_t *display, enum pipepipe); enum
dp_link_rateigt_get_dp_link_rate_set_for_output(int drm_fd, igt_output_t *output); enumdp_lane_countigt_get_dp_lane_count_set_for_output(int drm_fd, igt_output_t *output);lib/igt_kms.h +3
-1+enum dp_link_rate igt_get_dp_max_link_rate (int drm_fd,igt_output_t +*output);enum dp_lane_count igt_get_dp_max_lane_count (int drm_fd, +igt_output_t *output);#endif /* __IGT_KMS_H__ */ --2.34.1
PATCH 4/14 lib/igt_kms: add function to force link retrain
In reply to a message not in the archivei915_dp_force_link_retrain debugfs allow forcing retraing on the connector. add a helper to write given retraining count to the same.
--- lib/igt_kms.c | 22 ++++++++++++++++++++++ lib/igt_kms.h | 1 + 2 files changed, 23 insertions(+)
lib/igt_kms.c +22 -0
@@ -6821,3 +6821,25 @@ enum dp_lane_count igt_get_dp_max_lane_count(int drm_fd, igt_output_t *output)return max_lane_count; } + +/** +* igt_force_link_retrain: +* @drm_fd: A drm file descriptor +* @output: Target output +* @retrain_count: number of retraining required +* +* Force link retrain on the output. +*/ +void igt_force_link_retrain (int drm_fd,igt_output_t *output,int retrain_count) +{ +int dir; +char value[2 ]; + +snprintf (value,sizeof (value),"%d" , retrain_count); +igt_require_f (output->name,"Invalid output" ); + dir =igt_debugfs_connector_dir (drm_fd, output->name,O_RDONLY ); +igt_assert_f (dir >=0 ,"Failed to open debugfs dir for connector %s\n" , +igt_output_name (output)); +igt_sysfs_write (dir,"i915_dp_force_link_retrain" , value,sizeof (value)); +close (dir); +}
lib/igt_kms.h +1 -0
@@ -1251,5 +1251,6 @@ enum dp_link_rate igt_get_dp_link_rate_set_for_output(int drm_fd, igt_output_t *enum dp_lane_count igt_get_dp_lane_count_set_for_output (int drm_fd,igt_output_t *output);enum dp_link_rate igt_get_dp_max_link_rate (int drm_fd,igt_output_t *output);enum dp_lane_count igt_get_dp_max_lane_count (int drm_fd,igt_output_t *output); +void igt_force_link_retrain (int drm_fd,igt_output_t *output,int retrain_count);#endif /* __IGT_KMS_H__ */
Signature · 1 line
2.34.1
PATCH 5/14 lib/igt_kms: add function to force link training failure
In reply to a message not in the archivei915_dp_force_link_training_failure debugfs
file is used to force link training failure.
add a function to force link training failure.
--- lib/igt_kms.c | 26 ++++++++++++++++++++++++++ lib/igt_kms.h | 1 + 2 files changed, 27 insertions(+)
lib/igt_kms.c +26 -0
@@ -6843,3 +6843,29 @@ void igt_force_link_retrain(int drm_fd, igt_output_t *output, int retrain_count)igt_sysfs_write (dir,"i915_dp_force_link_retrain" , value,sizeof (value));close (dir); } + +/** +* igt_force_lt_failure: +* @drm_fd: A drm file descriptor +* @output: Target output +* @failure_count: 1 for same link param and +* 2 for reduced link params +* +* Force link training failure on the output. +* @failure_count: 1 for retraining with same link params +* 2 for retraining with reduced link params +*/ +void igt_force_lt_failure (int drm_fd,igt_output_t *output,int failure_count) +{ +int dir; +char value[2 ]; + +snprintf (value,sizeof (value),"%d" , failure_count); +igt_require_f (output->name,"Invalid output" ); + dir =igt_debugfs_connector_dir (drm_fd, output->name,O_RDONLY ); +igt_assert_f (dir >=0 ,"Failed to open debugfs dir for connector %s\n" , +igt_output_name (output)); +igt_sysfs_write (dir,"i915_dp_force_link_training_failure" , + value,sizeof (value)); +close (dir); +}
lib/igt_kms.h +1 -0
@@ -1252,5 +1252,6 @@ enum dp_lane_count igt_get_dp_lane_count_set_for_output(int drm_fd, igt_output_tenum dp_link_rate igt_get_dp_max_link_rate (int drm_fd,igt_output_t *output);enum dp_lane_count igt_get_dp_max_lane_count (int drm_fd,igt_output_t *output);void igt_force_link_retrain (int drm_fd,igt_output_t *output,int retrain_count); +void igt_force_lt_failure (int drm_fd,igt_output_t *output,int failure_count);#endif /* __IGT_KMS_H__ */
Signature · 1 line
2.34.1
PATCH 6/14 lib/igt_kms: add function to check if retrain disabled
In reply to a message not in the archiveadd helper to check if retraining is disabled, retraining will be disable if we are at the lowest link parameters or the lowest mode supported on a panel
--- lib/igt_kms.c | 24 ++++++++++++++++++++++++ lib/igt_kms.h | 1 + 2 files changed, 25 insertions(+)
lib/igt_kms.c +24 -0
@@ -6869,3 +6869,27 @@ void igt_force_lt_failure(int drm_fd, igt_output_t *output, int failure_count) value, sizeof(value));close (dir); } + +/** +* igt_get_dp_link_retrain_disabled: +* @drm_fd: A drm file descriptor +* @output: Target output +* +* Returns: True if link retrain disabled, false otherwise +*/ +bool igt_get_dp_link_retrain_disabled (int drm_fd,igt_output_t *output) +{ +int dir, res; +char buf[512 ]; + +igt_require_f (output->name,"Invalid output" ); + dir =igt_debugfs_connector_dir (drm_fd, output->name,O_RDONLY ); +igt_assert_f (dir >=0 ,"Failed to open debugfs dir for connector %s\n" , +igt_output_name (output)); + res =igt_debugfs_simple_read (dir, +"i915_dp_link_retrain_disabled" , + buf,sizeof (buf)); +close (dir); +igt_require (res >0 ); +return strstr (buf,"yes" ); +}
lib/igt_kms.h +1 -0
@@ -1253,5 +1253,6 @@ enum dp_link_rate igt_get_dp_max_link_rate(int drm_fd, igt_output_t *output);enum dp_lane_count igt_get_dp_max_lane_count (int drm_fd,igt_output_t *output);void igt_force_link_retrain (int drm_fd,igt_output_t *output,int retrain_count);void igt_force_lt_failure (int drm_fd,igt_output_t *output,int failure_count); +bool igt_get_dp_link_retrain_disabled (int drm_fd,igt_output_t *output);#endif /* __IGT_KMS_H__ */
Signature · 1 line
2.34.1
PATCH 7/14 lib/igt_kms: add function to check force link training failure support
In reply to a message not in the archiveadd helper to check if platform support forcing
link training failures
--- lib/igt_kms.c | 25 +++++++++++++++++++++++++ lib/igt_kms.h | 1 + 2 files changed, 26 insertions(+)
lib/igt_kms.c +25 -0
@@ -6893,3 +6893,28 @@ bool igt_get_dp_link_retrain_disabled(int drm_fd, igt_output_t *output)igt_require (res >0 );return strstr (buf,"yes" ); } + +/** +* Checks if the force link training failure debugfs +* is available for a specific output. +* +* @drmfd: file descriptor of the DRM device. +* @output: output to check. +* Returns: +* true if the debugfs is available, false otherwise. +*/ +bool igt_has_force_link_training_failure_debugfs (int drmfd,igt_output_t *output) +{ +int debugfs_fd, ret; +char buf[512 ]; + +igt_assert_f (output->name,"Invalid output\n" ); + debugfs_fd =igt_debugfs_connector_dir (drmfd, output->name,O_RDONLY ); +if (debugfs_fd <0 ) +return false; + ret =igt_debugfs_simple_read (debugfs_fd, +"i915_dp_force_link_training_failure" , + buf,sizeof (buf)); +close (debugfs_fd); +return ret >=0 ; +}
lib/igt_kms.h +1 -0
@@ -1254,5 +1254,6 @@ enum dp_lane_count igt_get_dp_max_lane_count(int drm_fd, igt_output_t *output);void igt_force_link_retrain (int drm_fd,igt_output_t *output,int retrain_count);void igt_force_lt_failure (int drm_fd,igt_output_t *output,int failure_count);bool igt_get_dp_link_retrain_disabled (int drm_fd,igt_output_t *output); +bool igt_has_force_link_training_failure_debugfs (int drmfd,igt_output_t *output);#endif /* __IGT_KMS_H__ */
Signature · 1 line
2.34.1
RE: [PATCH i-g-t 07/14] lib/igt_kms: add function to check force link training failure support
Quoted 10 lines
-----Original Message-----
From: igt-dev <[email protected]> On Behalf Of Kunal Joshi
Sent: Monday, August 26, 2024 1:36 AM
To: [email protected]
Cc: Joshi, Kunal1 <[email protected]>
Subject: [PATCH i-g-t 07/14]lib/igt_kms: add function to check force link training failure support
Quoted 3 lines
add helper to check if platform support forcing link training failures
Signed-off-by Kunal Joshi <[email protected]>
LGTM.
Quoted 52 lines
--- lib/igt_kms.c | 25 +++++++++++++++++++++++++ lib/igt_kms.h | 1 + 2 files changed, 26 insertions(+)lib/igt_kms.c +17
-0@@ -6893,3 +6893,28 @@ bool igt_get_dp_link_retrain_disabled(int drm_fd, igt_output_t *output) igt_require(res > 0);return strstr (buf,"yes" ); } + +/** +* Checks if the force link training failure debugfs +* is available for a specific output. +* +* @drmfd: file descriptor of the DRM device. +* @output: output to check. +* Returns: +* true if the debugfs is available, false otherwise. +*/ +bool igt_has_force_link_training_failure_debugfs (int drmfd, +igt_output_t *output) { +int debugfs_fd, ret; +char buf[512 ]; + +igt_assert_f (output->name,"Invalid output\n" ); + debugfs_fd = igt_debugfs_connector_dir(drmfd, output->name,
O_RDONLY);lib/igt_kms.c +8
-0+if (debugfs_fd <0 ) +return false; + ret =igt_debugfs_simple_read (debugfs_fd, +"i915_dp_force_link_training_failure" , + buf,sizeof (buf)); +close (debugfs_fd); +return ret >=0 ; +}lib/igt_kms.h +0
-0@@ -1254,5 +1254,6 @@ enum dp_lane_count igt_get_dp_max_lane_count(int drm_fd, igt_output_t *output); void igt_force_link_retrain(int drm_fd, igt_output_t *output, int retrain_count); void igt_force_lt_failure(int drm_fd,
igt_output_t*output, intfailure_count); booligt_get_dp_link_retrain_disabled(int drm_fd, igt_output_t *output);lib/igt_kms.h +2
-1+bool igt_has_force_link_training_failure_debugfs (int drmfd, +igt_output_t *output);#endif /* __IGT_KMS_H__ */ --2.34.1
PATCH 8/14 lib/igt_kms: add helper to get pending lt failures
In reply to a message not in the archivei915_dp_force_link_training_failure can be written to written to trigger link trainig failures on retrain. add helper to get pending link training failure count.
--- lib/igt_kms.c | 23 +++++++++++++++++++++++ lib/igt_kms.h | 1 + 2 files changed, 24 insertions(+)
lib/igt_kms.c +23 -0
@@ -6918,3 +6918,26 @@ bool igt_has_force_link_training_failure_debugfs(int drmfd, igt_output_t *outputclose (debugfs_fd);return ret >=0 ; } + +/** +* igt_get_dp_pending_lt_failures: +* @drm_fd: A drm file descriptor +* @output: Target output +* +* Returns: Number of pending link training failures. +*/ +int igt_get_dp_pending_lt_failures (int drm_fd,igt_output_t *output) +{ +int dir, res, ret; +char buf[512 ]; + +igt_require_f (output->name,"Invalid output" ); + dir =igt_debugfs_connector_dir (drm_fd, output->name,O_RDONLY ); +igt_assert_f (dir >=0 ,"Failed to open debugfs dir for connector %s\n" , +igt_output_name (output)); + res =igt_debugfs_simple_read (dir,"i915_dp_force_link_training_failure" , buf,sizeof (buf)); +close (dir); +igt_require (res >0 ); +sscanf (buf,"%d" , &ret); +return ret; +}
lib/igt_kms.h +1 -0
@@ -1255,5 +1255,6 @@ void igt_force_link_retrain(int drm_fd, igt_output_t *output, int retrain_count)void igt_force_lt_failure (int drm_fd,igt_output_t *output,int failure_count);bool igt_get_dp_link_retrain_disabled (int drm_fd,igt_output_t *output);bool igt_has_force_link_training_failure_debugfs (int drmfd,igt_output_t *output); +int igt_get_dp_pending_lt_failures (int drm_fd,igt_output_t *output);#endif /* __IGT_KMS_H__ */
Signature · 1 line
2.34.1
PATCH 9/14 lib/igt_kms: add helper to get pending retrain count
In reply to a message not in the archivei915_dp_force_link_retrain can be written to trigger link retraining. add helper to get pending retrainig failure count.
--- lib/igt_kms.c | 23 +++++++++++++++++++++++ lib/igt_kms.h | 1 + 2 files changed, 24 insertions(+)
lib/igt_kms.c +23 -0
@@ -6941,3 +6941,26 @@ int igt_get_dp_pending_lt_failures(int drm_fd, igt_output_t *output)sscanf (buf,"%d" , &ret);return ret; } + +/** +* igt_dp_pending_retrain: +* @drm_fd: A drm file descriptor +* @output: Target output +* +* Returns: Number of pending link retrains. +*/ +int igt_get_dp_pending_retrain (int drm_fd,igt_output_t *output) +{ +int dir, res, ret; +char buf[512 ]; + +igt_require_f (output->name,"Invalid output" ); + dir =igt_debugfs_connector_dir (drm_fd, output->name,O_RDONLY ); +igt_assert_f (dir >=0 ,"Failed to open debugfs dir for connector %s\n" , +igt_output_name (output)); + res =igt_debugfs_simple_read (dir,"i915_dp_force_link_retrain" , buf,sizeof (buf)); +close (dir); +igt_require (res >0 ); +sscanf (buf,"%d" , &ret); +return ret; +}
lib/igt_kms.h +1 -0
@@ -1256,5 +1256,6 @@ void igt_force_lt_failure(int drm_fd, igt_output_t *output, int failure_count);bool igt_get_dp_link_retrain_disabled (int drm_fd,igt_output_t *output);bool igt_has_force_link_training_failure_debugfs (int drmfd,igt_output_t *output);int igt_get_dp_pending_lt_failures (int drm_fd,igt_output_t *output); +int igt_get_dp_pending_retrain (int drm_fd,igt_output_t *output);#endif /* __IGT_KMS_H__ */
Signature · 1 line
2.34.1
PATCH 10/14 lib/igt_kms: add helper to set connector link status
In reply to a message not in the archiveadd helper to set connector's link status property
--- lib/igt_kms.c | 36 ++++++++++++++++++++++++++++++++++++ lib/igt_kms.h | 2 ++ 2 files changed, 38 insertions(+)
lib/igt_kms.c +36 -0
@@ -2213,6 +2213,42 @@ void kmstest_set_connector_dpms(int fd, drmModeConnector *connector, int mode) dpms, mode) == 0); } +/** +* kmstest_set_connector_link_status +* @drm_fd: drm file descriptor +* @connector: libdrm connector +* @link_status: DRM link status value +* +* This function sets the link status of @connector to @link_status. +*/ +void kmstest_set_connector_link_status (int drm_fd,drmModeConnector *connector, +int link_status) +{ +int i, link_status_prop =0 ; +bool found_it = false; + +for (i =0 ; i < connector->count_props; i++) { +struct drm_mode_get_property prop = { + .prop_id = connector->props[i], + }; + +if (drmIoctl (drm_fd,DRM_IOCTL_MODE_GETPROPERTY , &prop)) +continue ; + +if (strcmp (prop.name,"link-status" )) +continue ; + + link_status_prop = prop.prop_id; + found_it = true; +break ; + } +igt_assert_f (found_it,"LINK_STATUS property not found on %d\n" , + connector->connector_id); + +igt_assert (drmModeConnectorSetProperty (drm_fd, connector->connector_id, + link_status_prop, link_status) ==0 ); +} +/** * kmstest_get_property: * @drm_fd: drm file descriptor
lib/igt_kms.h +2 -0
@@ -301,6 +301,8 @@ bool kmstest_probe_connector_config(int drm_fd, uint32_t connector_id,void kmstest_free_connector_config (struct kmstest_connector_config *config);void kmstest_set_connector_dpms (int fd,drmModeConnector *connector,int mode); +void kmstest_set_connector_link_status (int drm_fd,drmModeConnector *connector, +int link_status);bool kmstest_get_property (int drm_fd,uint32_t object_id,uint32_t object_type,const char *name,uint32_t *prop_id,uint64_t *value,drmModePropertyPtr *prop);
Signature · 1 line
2.34.1
Re: [PATCH i-g-t 10/14] lib/igt_kms: add helper to set connector link status
Quoted 18 lines · Kunal Joshi
add helper to set connector's link status property
Signed-off-by Kunal Joshi <[email protected]>--- lib/igt_kms.c | 36 ++++++++++++++++++++++++++++++++++++ lib/igt_kms.h | 2 ++ 2 files changed, 38 insertions(+)lib/igt_kms.c +2
-0@@ -2213,6 +2213,42 @@ void kmstest_set_connector_dpms(int fd, drmModeConnector *connector, int mode) dpms, mode) == 0); } +/** +* kmstest_set_connector_link_status
lib/igt_kms.c void kmstest_set_connector_dpms(int fd, drmModeConnector *connector, int mode) · line 2227
Quoted 10 lines
lib/igt_kms.c +10
-0+* @drm_fd: drm file descriptor +* @connector: libdrm connector +* @link_status: DRM link status value +* +* This function sets the link status of @connector to @link_status. +*/ +void kmstest_set_connector_link_status (int drm_fd,drmModeConnector *connector, +int link_status) +{ +int i, link_status_prop =0 ;
The property ID's type is uint32_t.
lib/igt_kms.c void kmstest_set_connector_dpms(int fd, drmModeConnector *connector, int mode) · line 2238
Quoted 11 lines
lib/igt_kms.c +11
-0+bool found_it = false; + +for (i =0 ; i < connector->count_props; i++) { +struct drm_mode_get_property prop = { + .prop_id = connector->props[i], + }; + +if (drmIoctl (drm_fd,DRM_IOCTL_MODE_GETPROPERTY , &prop)) +continue ; + +if (strcmp (prop.name,"link-status" ))
Maybe better looking up the name from igt_connector_prop_names[]. Looks like the property ID is also already cached in igt_output_t::props[IGT_IGT_CONNECTOR_LINK_STATUS], but looking it up again here matches the related DPMS helper, so for now it's ok to do the same.
Quoted 32 lines
lib/igt_kms.c +13
-0+continue ; + + link_status_prop = prop.prop_id; + found_it = true; +break ; + } +igt_assert_f (found_it,"LINK_STATUS property not found on %d\n" , + connector->connector_id); + +igt_assert (drmModeConnectorSetProperty (drm_fd, connector->connector_id, + link_status_prop, link_status) ==0 ); +} +/** * kmstest_get_property: * @drm_fd: drm file descriptor lib/igt_kms.h +2
-0@@ -301,6 +301,8 @@ bool kmstest_probe_connector_config(int drm_fd, uint32_t connector_id,void kmstest_free_connector_config (struct kmstest_connector_config *config);void kmstest_set_connector_dpms (int fd,drmModeConnector *connector,int mode); +void kmstest_set_connector_link_status (int drm_fd,drmModeConnector *connector, +int link_status);bool kmstest_get_property (int drm_fd,uint32_t object_id,uint32_t object_type,const char *name,uint32_t *prop_id,uint64_t *value,drmModePropertyPtr *prop);Signature · 1 line
2.34.1
RE: [PATCH i-g-t 10/14] lib/igt_kms: add helper to set connector link status
Hello Imre,
-----Original Message-----
From: Deak, Imre <[email protected]>
Sent: Tuesday, September 3, 2024 7:26 PM
To: Joshi, Kunal1 <[email protected]>
Cc: [email protected]
Subject: Re: [PATCH i-g-t 10/14] lib/igt_kms: add helper to set connector link status
Quoted 18 lines · Kunal Joshi
add helper to set connector's link status property
Signed-off-by Kunal Joshi <[email protected]>--- lib/igt_kms.c | 36 ++++++++++++++++++++++++++++++++++++ lib/igt_kms.h | 2 ++ 2 files changed, 38 insertions(+)lib/igt_kms.c index 91f75243d..e0533f6ae renamed from lib/igt_kms.c +0
-0100644
lib/igt_kms.c +2
-0@@ -2213,6 +2213,42 @@ void kmstest_set_connector_dpms(int fd, drmModeConnector *connector, int mode) dpms, mode) == 0); } +/** +* kmstest_set_connector_link_status
lib/igt_kms.c void kmstest_set_connector_dpms(int fd, drmModeConnector *connector, int mode) · line 2227
Quoted 10 lines
lib/igt_kms.c +10
-0+* @drm_fd: drm file descriptor +* @connector: libdrm connector +* @link_status: DRM link status value +* +* This function sets the link status of @connector to @link_status. +*/ +void kmstest_set_connector_link_status (int drm_fd,drmModeConnector *connector, +int link_status) +{ +int i, link_status_prop =0 ;
The property ID's type is uint32_t.[Joshi, Kunal1
PATCH 11/14 lib/igt_kms: add function to reset link params
In reply to a message not in the archiveWriting auto to i915_dp_force_(link_rate/lane_count) and retraing afterwards sets max link param's supported by sink.Reset link rate and lane count to auto, also installs exit handler to set link rate and lane count to auto on exit
--- lib/igt_kms.c | 36 ++++++++++++++++++++++++++++++++++++ lib/igt_kms.h | 1 + 2 files changed, 37 insertions(+)
lib/igt_kms.c +36 -0
@@ -7000,3 +7000,39 @@ int igt_get_dp_pending_retrain(int drm_fd, igt_output_t *output)sscanf (buf,"%d" , &ret);return ret; } + +/** +* igt_reset_link_params: +* @drm_fd: A drm file descriptor +* @output: Target output +* +* Reset link rate and lane count to auto, also installs exit handler +* to set link rate and lane count to auto on exit +*/ +void igt_reset_link_params (int drm_fd,igt_output_t *output) +{ +bool valid; +drmModeConnector *temp; + +igt_require_f (output->name,"Invalid output" ); + valid = true; + valid = valid &&connector_attr_set_debugfs (drm_fd, output->config.connector, +"i915_dp_force_link_rate" , +"auto" ,"auto" ); + valid = valid &&connector_attr_set_debugfs (drm_fd, output->config.connector, +"i915_dp_force_lane_count" , +"auto" ,"auto" ); + valid = valid &&connector_attr_set_debugfs (drm_fd, output->config.connector, +"i915_dp_force_link_retrain" , +"1" ,"1" ); +igt_assert_f (valid,"Unable to set attr or install exit handler\n" ); +dump_connector_attrs (); +igt_install_exit_handler (reset_connectors_at_exit); + +/* +* To allow callers to always use GetConnectorCurrent we need to force a +* redetection here. +*/ + temp =drmModeGetConnector (drm_fd, output->config.connector->connector_id); +drmModeFreeConnector (temp); +}
lib/igt_kms.h +1 -0
@@ -1259,5 +1259,6 @@ bool igt_get_dp_link_retrain_disabled(int drm_fd, igt_output_t *output);bool igt_has_force_link_training_failure_debugfs (int drmfd,igt_output_t *output);int igt_get_dp_pending_lt_failures (int drm_fd,igt_output_t *output);int igt_get_dp_pending_retrain (int drm_fd,igt_output_t *output); +void igt_reset_link_params (int drm_fd,igt_output_t *output);#endif /* __IGT_KMS_H__ */
Signature · 1 line
2.34.1
Re: [PATCH i-g-t 11/14] lib/igt_kms: add function to reset link params
Quoted 29 lines · Kunal Joshi
Writing auto to
i915_dp_force_(link_rate/lane_count)and retraing afterwards sets max link param's supported by sink.Reset link rate and lane count to auto, also installs exit handler to set link rate and lane count to auto on exit--- lib/igt_kms.c | 36 ++++++++++++++++++++++++++++++++++++ lib/igt_kms.h | 1 + 2 files changed, 37 insertions(+)lib/igt_kms.c +12
-0@@ -7000,3 +7000,39 @@ int igt_get_dp_pending_retrain(int drm_fd, igt_output_t *output)sscanf (buf,"%d" , &ret);return ret; } + +/** +* igt_reset_link_params: +* @drm_fd: A drm file descriptor +* @output: Target output +* +* Reset link rate and lane count to auto, also installs exit handler +* to set link rate and lane count to auto on exit +*/ +void igt_reset_link_params (int drm_fd,igt_output_t *output) +{ +bool valid;
lib/igt_kms.c int igt_get_dp_pending_retrain(int drm_fd, igt_output_t *output) · line 7024
Quoted 10 lines
lib/igt_kms.c +10
-0+drmModeConnector *temp; + +igt_require_f (output->name,"Invalid output" ); + valid = true; + valid = valid &&connector_attr_set_debugfs (drm_fd, output->config.connector, +"i915_dp_force_link_rate" , +"auto" ,"auto" ); + valid = valid &&connector_attr_set_debugfs (drm_fd, output->config.connector, +"i915_dp_force_lane_count" , +"auto" ,"auto" );
Couldn't the above use the corresponding helpers added? I don't see those used elsewhere.
lib/igt_kms.c int igt_get_dp_pending_retrain(int drm_fd, igt_output_t *output) · line 7027
Quoted 3 lines
lib/igt_kms.c +3
-0+ valid = valid &&connector_attr_set_debugfs (drm_fd, output->config.connector, +"i915_dp_force_link_retrain" , +"1" ,"1" );
Not sure if this is needed, if the link params are reset before a modeset. The latter does a link training anyway if needed.
Quoted 25 lines
lib/igt_kms.c +11
-0+igt_assert_f (valid,"Unable to set attr or install exit handler\n" ); +dump_connector_attrs (); +igt_install_exit_handler (reset_connectors_at_exit); + +/* +* To allow callers to always use GetConnectorCurrent we need to force a +* redetection here. +*/ + temp =drmModeGetConnector (drm_fd, output->config.connector->connector_id); +drmModeFreeConnector (temp); +}lib/igt_kms.h +1
-0@@ -1259,5 +1259,6 @@ bool igt_get_dp_link_retrain_disabled(int drm_fd, igt_output_t *output);bool igt_has_force_link_training_failure_debugfs (int drmfd,igt_output_t *output);int igt_get_dp_pending_lt_failures (int drm_fd,igt_output_t *output);int igt_get_dp_pending_retrain (int drm_fd,igt_output_t *output); +void igt_reset_link_params (int drm_fd,igt_output_t *output);#endif /* __IGT_KMS_H__ */ Signature · 1 line
2.34.1
RE: [PATCH i-g-t 11/14] lib/igt_kms: add function to reset link params
Hello Imre,
-----Original Message-----
From: Deak, Imre <[email protected]>
Sent: Tuesday, September 3, 2024 7:56 PM
To: Joshi, Kunal1 <[email protected]>
Cc: [email protected]
Subject: Re: [PATCH i-g-t 11/14] lib/igt_kms: add function to reset link params
Quoted 27 lines · Kunal Joshi
Writing auto to
i915_dp_force_(link_rate/lane_count)and retraing afterwards sets max link param's supported by sink.Reset link rate and lane count to auto, also installs exit handler to set link rate and lane count to auto on exit--- lib/igt_kms.c | 36 ++++++++++++++++++++++++++++++++++++ lib/igt_kms.h | 1 + 2 files changed, 37 insertions(+)lib/igt_kms.c index e0533f6ae..b7511ccfc renamed from lib/igt_kms.c +0
-0100644
lib/igt_kms.c +10
-0@@ -7000,3 +7000,39 @@ int igt_get_dp_pending_retrain(int drm_fd, igt_output_t *output)sscanf (buf,"%d" , &ret);return ret; } + +/** +* igt_reset_link_params: +* @drm_fd: A drm file descriptor +* @output: Target output +* +* Reset link rate and lane count to auto, also installs exit handler +* to set link rate and lane count to auto on exit */ void +igt_reset_link_params (int drm_fd,igt_output_t *output) { +bool valid;
lib/igt_kms.c int igt_get_dp_pending_retrain(int drm_fd, igt_output_t *output) · line 7022
Quoted 10 lines
lib/igt_kms.c +10
-0+drmModeConnector *temp; + +igt_require_f (output->name,"Invalid output" ); + valid = true; + valid = valid &&connector_attr_set_debugfs (drm_fd, output->config.connector, +"i915_dp_force_link_rate" , +"auto" ,"auto" ); + valid = valid &&connector_attr_set_debugfs (drm_fd, output->config.connector, +"i915_dp_force_lane_count" , +"auto" ,"auto" );
Couldn't the above use the corresponding helpers added? I don't see those used elsewhere.[Joshi, Kunal1
PATCH 12/14 lib/igt_kms: allow set and reset value to be same
In reply to a message not in the archiveallow set and reset value to be same, let the caller handle this scenario instead.
example scenario where this is required. i915_dp_force_link_rate should be auto before starting test should be auto at exit
--- lib/igt_kms.c | 3 --- 1 file changed, 3 deletions(-)
lib/igt_kms.c +0 -3
@@ -1572,9 +1572,6 @@ static bool connector_attr_set(int idx, drmModeConnector *connector,return false; } -if (!strcmp (c->value, c->reset_value)) -connector_attr_free (c); -return true; }
Signature · 1 line
2.34.1
Re: [PATCH i-g-t 12/14] lib/igt_kms: allow set and reset value to be same
Quoted 17 lines · Kunal Joshi
allow set and reset value to be same, let the caller handle this scenario instead.
example scenario where this is required.
i915_dp_force_link_rateshould be auto before starting test should be auto at exitSigned-off-by Kunal Joshi <[email protected]>--- lib/igt_kms.c | 3 --- 1 file changed, 3 deletions(-)lib/igt_kms.c +0
-0
lib/igt_kms.c static bool connector_attr_set(int idx, drmModeConnector *connector, · line 1577
Quoted 6 lines
lib/igt_kms.c +0
-3@@ -1572,9 +1572,6 @@ static bool connector_attr_set(int idx, drmModeConnector *connector,return false; } -if (!strcmp (c->value, c->reset_value)) -connector_attr_free (c); -
But it's not handled now by the caller. I agree it's better to keep the behavior for existing users, maybe adding a separate function for this (named *force_reset() or similar).
Quoted 6 lines
lib/igt_kms.c +0
-0return true; }Signature · 1 line
2.34.1
RE: [PATCH i-g-t 12/14] lib/igt_kms: allow set and reset value to be same
Hello Imre,
-----Original Message-----
From: Deak, Imre <[email protected]>
Sent: Tuesday, September 3, 2024 7:59 PM
To: Joshi, Kunal1 <[email protected]>
Cc: [email protected]
Subject: Re: [PATCH i-g-t 12/14] lib/igt_kms: allow set and reset value to be same
Quoted 17 lines · Kunal Joshi
allow set and reset value to be same, let the caller handle this scenario instead.
example scenario where this is required.
i915_dp_force_link_rateshould be auto before starting test should be auto at exitSigned-off-by Kunal Joshi <[email protected]>--- lib/igt_kms.c | 3 --- 1 file changed, 3 deletions(-)lib/igt_kms.c index b7511ccfc..5427a849e renamed from lib/igt_kms.c +0
-0100644
lib/igt_kms.c static bool connector_attr_set(int idx, drmModeConnector *connector, · line 1577
Quoted 6 lines
lib/igt_kms.c +0
-3@@ -1572,9 +1572,6 @@ static bool connector_attr_set(int idx, drmModeConnector *connector,return false; } -if (!strcmp (c->value, c->reset_value)) -connector_attr_free (c); -
But it's not handled now by the caller. I agree it's better to keep the behavior for existing users, maybe adding a separate function for this (named *force_reset() or similar).
----------------------------------------------------------------------------------------------
Will add parameter to allow similar set and reset_value if allow_eqaul_set_reset is true
And handle this wherever we have used this.
Thanks and Regards
Kunal Joshi
Quoted 6 lines
lib/igt_kms.c +0
-1return true; } --2.34.1
PATCH 13/14 tests/intel/kms_dp_fallback: add test for validating fallback
In reply to a message not in the archiveadd test to valdiate fallback for DP connector,
eDP subtest will be added later.
How does test validates fallback?
- test start by doing initial modeset on default mode (if connector is DP then we enable just that connector, if its DP-MST we enable all on the same topology)
- force link training failures and retrain until we reach lowest param or retrain is disabled
- expect hotplug and link-status to turn bad
- expect link params reduce after fallback
v2: add test for mst (imre)
refresh mode list (imre)
monitor got hotplugs (imre)
check link parameter are reduced (imre)
v3: call check_fn (Santosh)
v4: handle buggy lg monitor (Imre)
remove reset in between (Imre)
v5: fit modes wrt to bw in non-mst case as well
--- tests/intel/kms_fallback.c | 515 +++++++++++++++++++++++++++++++++++++ tests/meson.build | 1 + 2 files changed, 516 insertions(+) create mode 100644 tests/intel/kms_fallback.c
tests/intel/kms_fallback.c new file +515 -0
@@ -0,0 +1,515 @@ +/* SPDX-License-Identifier: MIT */ +/* +* Copyright © 2024 Intel Corporation +*/ + +/** +* TEST: kms fallback +* Category: Display +* Description: Test link training fallback for eDP/DP connectors +* Driver requirement: i915, xe +* Functionality: link training +* Mega feature: General Display Features +* Test category: functionality test +*/ + +#include <sys/types.h> + +#include "igt.h" +#include "igt_psr.h" + +/** +* SUBTEST: dp-fallback +* Description: Test fallback on DP connectors +*/ + +#define RETRAIN_COUNT 1 +#define LT_FAILURE_SAME_CAPS 1 +#define LT_FAILURE_REDUCED_CAPS 2 +#define SPURIOUS_HPD_RETRY 3 + +static int traversed_mst_outputs[IGT_MAX_PIPES ]; +static int traversed_mst_output_count; +typedef struct { +int drm_fd; +igt_display_t display; +drmModeModeInfo *mode; +igt_output_t *output; +enum pipe pipe; +struct igt_fb fb; +struct igt_plane *primary; +int n_pipes; +}data_t ; + +typedef int (*condition_check_fn )(int drm_fd,igt_output_t *output); + +IGT_TEST_DESCRIPTION ("Test link training fallback" ); + +static const char *str_link_rate (enum dp_link_rate link_rate) +{ +switch (link_rate) { +case DP_LINK_RATE_162000 : +return "1.62 Gbps" ; +case DP_LINK_RATE_216000 : +return "2.16 Gbps" ; +case DP_LINK_RATE_243000 : +return "2.43 Gbps" ; +case DP_LINK_RATE_270000 : +return "2.70 Gbps" ; +case DP_LINK_RATE_324000 : +return "3.24 Gbps" ; +case DP_LINK_RATE_432000 : +return "4.32 Gbps" ; +case DP_LINK_RATE_540000 : +return "5.40 Gbps" ; +case DP_LINK_RATE_675000 : +return "6.75 Gbps" ; +case DP_LINK_RATE_810000 : +return "8.10 Gbps" ; +case DP_LINK_RATE_1000000 : +return "10.00 Gbps" ; +case DP_LINK_RATE_1350000 : +return "13.50 Gbps" ; +case DP_LINK_RATE_2000000 : +return "20.00 Gbps" ; +default : +igt_assert_f (0 ,"Invalid link rate %d\n" , link_rate); + } +} + +static const char *str_lane_count (enum dp_lane_count lane_count) +{ +switch (lane_count) { +case DP_LANE_COUNT_1 : +return "1" ; +case DP_LANE_COUNT_2 : +return "2" ; +case DP_LANE_COUNT_4 : +return "4" ; +default : +igt_assert_f (0 ,"Invalid lane count %d\n" , lane_count); + } +} + +static void find_mst_outputs (int drm_fd,data_t *data, +igt_output_t *output, +igt_output_t **mst_outputs, +int *num_mst_outputs) +{ +bool is_output_mst; +uint64_t path_blob_id; +igt_output_t *connector_output; +drmModePropertyPtr path_prop =NULL ; +drmModePropertyPtr connector_path_prop =NULL ; + +igt_assert_f (output,"Invalid output\n" ); + +/* +* Check if given output is MST by checking if it has PATH property +*/ + is_output_mst =kmstest_get_property (drm_fd, + output->config.connector->connector_id, +DRM_MODE_OBJECT_CONNECTOR ,"PATH" ,NULL , + &path_blob_id, &path_prop); + +if (!is_output_mst) +return ; + +/* +* If output is MST check all other connected output which shares +* same path and fill mst_outputs and num_mst_outputs +*/ +for_each_connected_output (&data->display, connector_output) { + + connector_path_prop =NULL ; + +kmstest_get_property (drm_fd, + connector_output->config.connector->connector_id, +DRM_MODE_OBJECT_CONNECTOR ,"PATH" , +NULL , &path_blob_id, + &connector_path_prop); + +if (connector_path_prop && path_prop && + connector_path_prop->prop_id == path_prop->prop_id) + mst_outputs[(*num_mst_outputs)++] = connector_output; + +if (connector_path_prop) +drmModeFreeProperty (connector_path_prop); + } +if (path_prop) +drmModeFreeProperty (path_prop); +} + +static bool setup_mst_outputs (data_t *data,igt_output_t *mst_output[], +int *dp_mst_outputs) +{ +int i; +igt_output_t *output; + +igt_require_f (igt_check_output_is_dp_mst (data->output), +"Not a valid MST connector\n" ); + +/* +* Check if this is already traversed +*/ +for (i =0 ; i < traversed_mst_output_count; i++) +if (traversed_mst_outputs[i] == data->output->config.connector->connector_id) +return false; + +find_mst_outputs (data->drm_fd, data, data->output, + mst_output, dp_mst_outputs); + +for (i =0 ; i < *dp_mst_outputs; i++) { + output = mst_output[i]; + traversed_mst_outputs[traversed_mst_output_count++] = output->config.connector->connector_id; +igt_info ("Output %s is in same topology as %s\n" , +igt_output_name (output), +igt_output_name (data->output)); + } + +return true; +} + +static void setup_pipe_on_mst_outputs (data_t *data, +igt_output_t *mst_output[], +int *dp_mst_outputs) +{ +int i =0 ; + +igt_require_f (data->n_pipes >= *dp_mst_outputs, +"Need %d pipes to assign to %d MST outputs\n" , + data->n_pipes, *dp_mst_outputs); + +for_each_pipe (&data->display, data->pipe) { +if (i >= *dp_mst_outputs) +break ; +igt_info ("Setting pipe %s on output %s\n" , +kmstest_pipe_name (data->pipe), +igt_output_name (mst_output[i])); +igt_output_set_pipe (mst_output[i++], data->pipe); + } +} + +static void setup_modeset_on_mst_outputs (data_t *data, +igt_output_t *mst_output[], +int *dp_mst_outputs, +drmModeModeInfo *mode[], +struct igt_fb fb[], +struct igt_plane *primary[]) +{ +int i; + +for (i =0 ; i < *dp_mst_outputs; i++) { + mst_output[i]->force_reprobe = true; +igt_output_refresh (mst_output[i]); + mode[i] =igt_output_get_mode (mst_output[i]); +igt_info ("Mode %dx%d@%d on output %s\n" , + mode[i]->hdisplay, mode[i]->vdisplay, + mode[i]->vrefresh, +igt_output_name (mst_output[i])); + primary[i] =igt_output_get_plane_type (mst_output[i], +DRM_PLANE_TYPE_PRIMARY ); +igt_create_color_fb (data->drm_fd, + mode[i]->hdisplay, + mode[i]->vdisplay, +DRM_FORMAT_XRGB8888 , +DRM_FORMAT_MOD_LINEAR ,0.0 ,1.0 ,0.0 , + &fb[i]); +igt_plane_set_fb (primary[i], &fb[i]); + } +} + +static bool fit_modes_in_bw (data_t *data) +{ +bool found; +int ret; + +if (!igt_display_try_commit2 (&data->display,COMMIT_ATOMIC )) { +igt_info ("Modes overridden\n" ); + found =igt_override_all_active_output_modes_to_fit_bw (&data->display); +igt_require_f (found, +"No valid mode combo found for MST modeset\n" ); + ret =igt_display_try_commit2 (&data->display,COMMIT_ATOMIC ); +igt_require_f (ret ==0 , +"Commit failure during MST modeset\n" ); + } +return true; +} + +static bool validate_modeset_mst_output (data_t *data, +igt_output_t *mst_output[], +int *dp_mst_outputs, +drmModeModeInfo *mode[], +struct igt_fb fb[], +struct igt_plane *primary[]) +{ + +igt_require_f (*dp_mst_outputs >0 ,"No MST outputs found\n" ); +setup_pipe_on_mst_outputs (data, mst_output, dp_mst_outputs); +setup_modeset_on_mst_outputs (data, mst_output, + dp_mst_outputs, + mode, fb, primary); +igt_assert_f (fit_modes_in_bw (data),"Unable to fit modes in bw\n" ); +return true; +} + +static bool setup_mst (data_t *data,bool is_mst, +igt_output_t *mst_output[], +int *dp_mst_outputs,drmModeModeInfo *mode[], +struct igt_fb fb[],struct igt_plane *primary[]) +{ +bool ret; + + *dp_mst_outputs =0 ; + ret =setup_mst_outputs (data, mst_output, dp_mst_outputs); +if (!ret) { +igt_info ("Skipping MST output %s as already tested\n" , +igt_output_name (data->output)); +return false; + } + + ret =validate_modeset_mst_output (data, mst_output, + dp_mst_outputs, mode, + fb, primary); +if (!ret) { +igt_info ("Skipping MST output %s as validpipe/output combo not found\n" , +igt_output_name (data->output)); +return false; + } + +igt_display_commit2 (&data->display,COMMIT_ATOMIC ); +return true; +} + +static int check_condition_with_timeout (int drm_fd,igt_output_t *output, +condition_check_fn check_fn, +double interval,double timeout) +{ +struct timespec start_time, current_time; +double elapsed_time; + +clock_gettime (CLOCK_MONOTONIC , &start_time); + +while (1 ) { +if (check_fn (drm_fd, output) ==0 ) { +return 0 ; + } + +clock_gettime (CLOCK_MONOTONIC , ¤t_time); + elapsed_time = (current_time.tv_sec - start_time.tv_sec) + + (current_time.tv_nsec - start_time.tv_nsec) /1e9 ; + +if (elapsed_time >= timeout) { +return -1 ; + } + +usleep ((useconds_t)(interval *1000000 )); + } +} + +static void test_fallback (data_t *data,bool is_mst) +{ +int dp_mst_outputs, retries; +igt_output_t *mst_outputs[IGT_MAX_PIPES ]; +enum dp_link_rate max_link_rate, curr_link_rate, prev_link_rate; +enum dp_lane_count max_lane_count, curr_lane_count, prev_lane_count; +uint32_t link_status_prop_id; +uint64_t link_status_value; +drmModeModeInfo *mst_modes[IGT_MAX_PIPES ], *mode; +drmModePropertyPtr link_status_prop; +struct igt_fb mst_fbs[IGT_MAX_PIPES ], fb; +struct igt_plane *mst_primarys[IGT_MAX_PIPES ], *primary; +struct udev_monitor *mon; + +igt_display_reset (&data->display); + retries =SPURIOUS_HPD_RETRY ; + +if (is_mst) { +if (!setup_mst (data, is_mst, mst_outputs, + &dp_mst_outputs, mst_modes, mst_fbs, + mst_primarys)) +return ; + }else { + data->pipe =PIPE_A ; +igt_output_set_pipe (data->output, data->pipe); + mode =igt_output_get_mode (data->output); + primary =igt_output_get_plane_type (data->output, +DRM_PLANE_TYPE_PRIMARY ); +igt_create_color_fb (data->drm_fd, + mode->hdisplay, mode->vdisplay, +DRM_FORMAT_XRGB8888 , +DRM_FORMAT_MOD_LINEAR ,0.0 ,1.0 ,0.0 , + &fb); +igt_plane_set_fb (primary, &fb); +igt_display_commit2 (&data->display,COMMIT_ATOMIC ); + } + +igt_info ("Testing link training fallback on %s\n" , +igt_output_name (data->output)); + +igt_reset_link_params (data->drm_fd, data->output); +igt_assert_eq (check_condition_with_timeout (data->drm_fd, + data->output, + igt_get_dp_pending_retrain, +1.0 ,20.0 ),0 ); + + max_link_rate =igt_get_dp_max_link_rate (data->drm_fd, data->output); + max_lane_count =igt_get_dp_max_lane_count (data->drm_fd, data->output); + +while (!igt_get_dp_link_retrain_disabled (data->drm_fd, + data->output)) { + + prev_link_rate =igt_get_dp_link_rate_set_for_output (data->drm_fd, data->output); + prev_lane_count =igt_get_dp_lane_count_set_for_output (data->drm_fd, data->output); + +igt_info ("Current link rate: %s, Current lane count: %s\n" , +str_link_rate (prev_link_rate), +str_lane_count (prev_lane_count)); + mon =igt_watch_uevents (); +igt_force_lt_failure (data->drm_fd, data->output, +LT_FAILURE_REDUCED_CAPS ); +igt_force_link_retrain (data->drm_fd, data->output, +RETRAIN_COUNT ); + +igt_assert_eq (check_condition_with_timeout (data->drm_fd, + data->output, + igt_get_dp_pending_retrain, +1.0 ,20.0 ),0 ); +igt_assert_eq (check_condition_with_timeout (data->drm_fd, + data->output, + igt_get_dp_pending_lt_failures, +1.0 ,20.0 ),0 ); + +if (igt_get_dp_link_retrain_disabled (data->drm_fd, + data->output)) { +igt_reset_connectors (); +return ; + } + +igt_assert_f (igt_hotplug_detected (mon,20 ), +"Didn't get hotplug for force link training failure\n" ); + +kmstest_get_property (data->drm_fd, + data->output->config.connector->connector_id, +DRM_MODE_OBJECT_CONNECTOR ,"link-status" , + &link_status_prop_id, &link_status_value, + &link_status_prop); + +igt_assert_eq (link_status_value,DRM_MODE_LINK_STATUS_BAD ); + +igt_flush_uevents (mon); + +if (is_mst) { +igt_assert_f (validate_modeset_mst_output (data, + mst_outputs, + &dp_mst_outputs, + mst_modes, + mst_fbs, + mst_primarys), +"MST modeset failed\n" ); + }else { + data->output->force_reprobe = true; +igt_output_refresh (data->output); + data->pipe =PIPE_A ; +igt_assert_f (fit_modes_in_bw (data), +"Unable to fit modes in bw\n" ); + +igt_output_set_pipe (data->output, data->pipe); + mode =igt_output_get_mode (data->output); +igt_info ("Mode %dx%d@%d on output %s\n" , + mode->hdisplay, mode->vdisplay, + mode->vrefresh, +igt_output_name (data->output)); + primary =igt_output_get_plane_type (data->output, +DRM_PLANE_TYPE_PRIMARY ); +igt_create_color_fb (data->drm_fd, + mode->hdisplay, + mode->vdisplay, +DRM_FORMAT_XRGB8888 , +DRM_FORMAT_MOD_LINEAR , +0.0 ,1.0 ,0.0 , &fb); +igt_plane_set_fb (primary, &fb); + } + +kmstest_set_connector_link_status (data->drm_fd, + data->output->config.connector, +DRM_MODE_LINK_STATUS_GOOD ); +igt_display_commit2 (&data->display,COMMIT_ATOMIC ); + +kmstest_get_property (data->drm_fd, + data->output->config.connector->connector_id, +DRM_MODE_OBJECT_CONNECTOR ,"link-status" , + &link_status_prop_id, &link_status_value, + &link_status_prop); +igt_assert_eq (link_status_value,DRM_MODE_LINK_STATUS_GOOD ); + + curr_link_rate =igt_get_dp_link_rate_set_for_output (data->drm_fd, data->output); + curr_lane_count =igt_get_dp_lane_count_set_for_output (data->drm_fd, data->output); + +igt_assert_f ((curr_link_rate < prev_link_rate || + curr_lane_count < prev_lane_count) || + ((curr_link_rate == max_link_rate && curr_lane_count == max_lane_count) && --retries), +"Fallback unsuccessful\n" ); + + prev_link_rate = curr_link_rate; + prev_lane_count = curr_lane_count; + } +} + +igt_main +{ +data_t data = {}; + + igt_fixture { + data.drm_fd =drm_open_driver_master (DRIVER_INTEL | +DRIVER_XE ); +kmstest_set_vt_graphics_mode (); +igt_display_require (&data.display, data.drm_fd); +igt_display_require_output (&data.display); +for_each_pipe (&data.display, data.pipe) { + data.n_pipes++; + } + } + + igt_subtest("dp-fallback") { +bool ran = false; +igt_output_t *output; + +for_each_connected_output (&data.display, output) { + + data.output = output; +if (!igt_has_force_link_training_failure_debugfs (data.drm_fd, + data.output)) { +igt_info ("Output %s unsupported\n" ,igt_output_name (data.output)); +continue ; + } + +if (output->config.connector->connector_type != DRM_MODE_CONNECTOR_DisplayPort) { +igt_info ("Skipping output %s as it's not DP\n" , output->name); +continue ; + } + + ran = true; + +/* +* Check output is MST +*/ +if (igt_check_output_is_dp_mst (data.output)) { +igt_info ("Testing MST output %s\n" , +igt_output_name (data.output)); +test_fallback (&data, true); + }else { +igt_info ("Testing DP output %s\n" , +igt_output_name (data.output)); +test_fallback (&data, false); + } + } +igt_require_f (ran,"No output supports fallback\n" ); + } + + igt_fixture { +igt_remove_fb (data.drm_fd, &data.fb); +igt_display_fini (&data.display); +close (data.drm_fd); + } +}
tests/meson.build +1 -0
@@ -249,6 +249,7 @@ intel_kms_progs = [ 'kms_dirtyfb', 'kms_draw_crc', 'kms_dsc', + 'kms_fallback', 'kms_fb_coherency', 'kms_fbcon_fbt', 'kms_fence_pin_leak',
Signature · 1 line
2.34.1
RE: [PATCH i-g-t 13/14] tests/intel/kms_dp_fallback: add test for validating fallback
Quoted 554 lines
-----Original Message-----
From: igt-dev <[email protected]> On Behalf Of Kunal Joshi
Sent: Monday, August 26, 2024 1:36 AM
To: [email protected]
Cc: Joshi, Kunal1 <[email protected]>; Deak, Imre <[email protected]>
Subject: [PATCH i-g-t 13/14] tests/intel/kms_dp_fallback: add test for validating fallbackadd test to valdiate fallback for DP connector, eDP subtest will be added later.
How does test validates fallback?
- test start by doing initial modeset on default mode (if connector is DP then we enable just that connector, if its DP-MST we enable all on the same topology)
- force link training failures and retrain until we reach lowest param or retrain is disabled
- expect hotplug and link-status to turn bad
- expect link params reduce after fallbackv2: add test for mst (imre)
refresh mode list (imre)
monitor got hotplugs (imre)
check link parameter are reduced (imre)v3: call
check_fn(Santosh)v4: handle buggy lg monitor (Imre)
remove reset in between (Imre)v5: fit modes wrt to bw in non-mst case as well
Cc Imre Deak <[email protected]>Signed-off-by Kunal Joshi <[email protected]>Suggested-by Imre Deak <[email protected]>--- tests/intel/kms_fallback.c | 515 +++++++++++++++++++++++++++++++++++++ tests/meson.build | 1 + 2 files changed, 516 insertions(+) create mode 100644 tests/intel/kms_fallback.ctests/intel/kms_fallback.c new file mode renamed from tests/intel/kms_fallback.c +0
-0100644 index 000000000..e97300c08
tests/intel/kms_fallback.c new file +124
-0@@ -0,0 +1,515 @@ +/* SPDX-License-Identifier: MIT */ +/* +* Copyright © 2024 Intel Corporation +*/ + +/** +* TEST: kms fallback +* Category: Display +* Description: Test link training fallback for eDP/DP connectors +* Driver requirement: i915, xe +* Functionality: link training +* Mega feature: General Display Features +* Test category: functionality test +*/ + +#include <sys/types.h> + +#include "igt.h" +#include "igt_psr.h" + +/** +* SUBTEST: dp-fallback +* Description: Test fallback on DP connectors */ + +#define RETRAIN_COUNT 1 +#define LT_FAILURE_SAME_CAPS 1 +#define LT_FAILURE_REDUCED_CAPS 2 +#define SPURIOUS_HPD_RETRY 3 + +static int traversed_mst_outputs[IGT_MAX_PIPES ]; +static int traversed_mst_output_count; +typedef struct { +int drm_fd; +igt_display_t display; +drmModeModeInfo *mode; +igt_output_t *output; +enum pipe pipe; +struct igt_fb fb; +struct igt_plane *primary; +int n_pipes; +}data_t ; + +typedef int (*condition_check_fn )(int drm_fd,igt_output_t *output); + +IGT_TEST_DESCRIPTION ("Test link training fallback" ); + +static const char *str_link_rate (enum dp_link_rate link_rate) { +switch (link_rate) { +case DP_LINK_RATE_162000 : +return "1.62 Gbps" ; +case DP_LINK_RATE_216000 : +return "2.16 Gbps" ; +case DP_LINK_RATE_243000 : +return "2.43 Gbps" ; +case DP_LINK_RATE_270000 : +return "2.70 Gbps" ; +case DP_LINK_RATE_324000 : +return "3.24 Gbps" ; +case DP_LINK_RATE_432000 : +return "4.32 Gbps" ; +case DP_LINK_RATE_540000 : +return "5.40 Gbps" ; +case DP_LINK_RATE_675000 : +return "6.75 Gbps" ; +case DP_LINK_RATE_810000 : +return "8.10 Gbps" ; +case DP_LINK_RATE_1000000 : +return "10.00 Gbps" ; +case DP_LINK_RATE_1350000 : +return "13.50 Gbps" ; +case DP_LINK_RATE_2000000 : +return "20.00 Gbps" ; +default : +igt_assert_f (0 ,"Invalid link rate %d\n" , link_rate); + } +} + +static const char *str_lane_count (enum dp_lane_count lane_count) { +switch (lane_count) { +case DP_LANE_COUNT_1 : +return "1" ; +case DP_LANE_COUNT_2 : +return "2" ; +case DP_LANE_COUNT_4 : +return "4" ; +default : +igt_assert_f (0 ,"Invalid lane count %d\n" , lane_count); + } +} + +static void find_mst_outputs (int drm_fd,data_t *data, +igt_output_t *output, +igt_output_t **mst_outputs, +int *num_mst_outputs) +{ +bool is_output_mst; +uint64_t path_blob_id; +igt_output_t *connector_output; +drmModePropertyPtr path_prop =NULL ; +drmModePropertyPtr connector_path_prop =NULL ; + +igt_assert_f (output,"Invalid output\n" ); + +/* +* Check if given output is MST by checking if it has PATH property +*/ + is_output_mst =kmstest_get_property (drm_fd, + output->config.connector->connector_id, +DRM_MODE_OBJECT_CONNECTOR ,"PATH" ,NULL , + &path_blob_id, &path_prop); + +if (!is_output_mst) +return ; + +/* +* If output is MST check all other connected output which shares +* same path and fill mst_outputs and num_mst_outputs +*/ +for_each_connected_output (&data->display, connector_output) { + + connector_path_prop =NULL ; + + kmstest_get_property(drm_fd, + connector_output->config.connector-Quoted 1 line
connector_id,tests/intel/kms_fallback.c new file +7
-0+DRM_MODE_OBJECT_CONNECTOR ,"PATH" , +NULL , &path_blob_id, + &connector_path_prop); + +if (connector_path_prop && path_prop && + connector_path_prop->prop_id == path_prop->prop_id) + mst_outputs[(*num_mst_outputs)++] =
connector_output;tests/intel/kms_fallback.c new file +22
-0+ +if (connector_path_prop) +drmModeFreeProperty (connector_path_prop); + } +if (path_prop) +drmModeFreeProperty (path_prop); +} + +static bool setup_mst_outputs(data_t *data, igt_output_t *mst_output[], + int *dp_mst_outputs) +{ + int i; + igt_output_t *output; + + igt_require_f(igt_check_output_is_dp_mst(data->output), + "Not a valid MST connector\n"); + + /* + * Check if this is already traversed + */ + for (i = 0; i < traversed_mst_output_count; i++) + if (traversed_mst_outputs[i] == data->output->config.connector-Quoted 1 line
connector_id)tests/intel/kms_fallback.c new file +8
-0+return false; + +find_mst_outputs (data->drm_fd, data, data->output, + mst_output, dp_mst_outputs); + +for (i =0 ; i < *dp_mst_outputs; i++) { + output = mst_output[i]; + traversed_mst_outputs[traversed_mst_output_count++] =
output->config.connector->connector_id;tests/intel/kms_fallback.c new file +47
-0+igt_info ("Output %s is in same topology as %s\n" , +igt_output_name (output), +igt_output_name (data->output)); + } + +return true; +} + +static void setup_pipe_on_mst_outputs (data_t *data, +igt_output_t *mst_output[], +int *dp_mst_outputs) +{ +int i =0 ; + +igt_require_f (data->n_pipes >= *dp_mst_outputs, +"Need %d pipes to assign to %d MST outputs\n" , + data->n_pipes, *dp_mst_outputs); + +for_each_pipe (&data->display, data->pipe) { +if (i >= *dp_mst_outputs) +break ; +igt_info ("Setting pipe %s on output %s\n" , +kmstest_pipe_name (data->pipe), +igt_output_name (mst_output[i])); +igt_output_set_pipe (mst_output[i++], data->pipe); + } +} + +static void setup_modeset_on_mst_outputs (data_t *data, +igt_output_t *mst_output[], +int *dp_mst_outputs, +drmModeModeInfo *mode[], +struct igt_fb fb[], +struct igt_plane *primary[]) +{ +int i; + +for (i =0 ; i < *dp_mst_outputs; i++) { + mst_output[i]->force_reprobe = true; +igt_output_refresh (mst_output[i]); + mode[i] =igt_output_get_mode (mst_output[i]); +igt_info ("Mode %dx%d@%d on output %s\n" , + mode[i]->hdisplay, mode[i]->vdisplay, + mode[i]->vrefresh, +igt_output_name (mst_output[i])); + primary[i] = igt_output_get_plane_type(mst_output[i], +DRM_PLANE_TYPE_PRIMARY);tests/intel/kms_fallback.c new file +17
-0+igt_create_color_fb (data->drm_fd, + mode[i]->hdisplay, + mode[i]->vdisplay, +DRM_FORMAT_XRGB8888 , +DRM_FORMAT_MOD_LINEAR ,0.0 ,1.0 ,0.0 , + &fb[i]); +igt_plane_set_fb (primary[i], &fb[i]); + } +} + +static bool fit_modes_in_bw (data_t *data) { +bool found; +int ret; + +if (!igt_display_try_commit2 (&data->display,COMMIT_ATOMIC )) { +igt_info ("Modes overridden\n" ); + found =
igt_override_all_active_output_modes_to_fit_bw(&data->display);tests/intel/kms_fallback.c new file +45
-0+igt_require_f (found, +"No valid mode combo found for MST modeset\n" ); + ret =igt_display_try_commit2 (&data->display,COMMIT_ATOMIC ); +igt_require_f (ret ==0 , +"Commit failure during MST modeset\n" ); + } +return true; +} + +static bool validate_modeset_mst_output (data_t *data, +igt_output_t *mst_output[], +int *dp_mst_outputs, +drmModeModeInfo *mode[], +struct igt_fb fb[], +struct igt_plane *primary[]) +{ + +igt_require_f (*dp_mst_outputs >0 ,"No MST outputs found\n" ); +setup_pipe_on_mst_outputs (data, mst_output, dp_mst_outputs); +setup_modeset_on_mst_outputs (data, mst_output, + dp_mst_outputs, + mode, fb, primary); +igt_assert_f (fit_modes_in_bw (data),"Unable to fit modes in bw\n" ); +return true; +} + +static bool setup_mst (data_t *data,bool is_mst, +igt_output_t *mst_output[], +int *dp_mst_outputs,drmModeModeInfo *mode[], +struct igt_fb fb[],struct igt_plane *primary[]) { +bool ret; + + *dp_mst_outputs =0 ; + ret =setup_mst_outputs (data, mst_output, dp_mst_outputs); +if (!ret) { +igt_info ("Skipping MST output %s as already tested\n" , +igt_output_name (data->output)); +return false; + } + + ret =validate_modeset_mst_output (data, mst_output, + dp_mst_outputs, mode, + fb, primary); +if (!ret) { + igt_info("Skipping MST output %s as validpipe/output combo notfound\n",
tests/intel/kms_fallback.c new file +39
-0+ igt_output_name(data->output)); +return false; + } + +igt_display_commit2 (&data->display,COMMIT_ATOMIC ); +return true; +} + +static int check_condition_with_timeout (int drm_fd,igt_output_t *output, +condition_check_fn check_fn, +double interval,double timeout) +{ +struct timespec start_time, current_time; +double elapsed_time; + +clock_gettime (CLOCK_MONOTONIC , &start_time); + +while (1 ) { +if (check_fn (drm_fd, output) ==0 ) { +return 0 ; + } + +clock_gettime (CLOCK_MONOTONIC , ¤t_time); + elapsed_time = (current_time.tv_sec - start_time.tv_sec) + + (current_time.tv_nsec - start_time.tv_nsec) /1e9 ; + +if (elapsed_time >= timeout) { +return -1 ; + } + +usleep ((useconds_t)(interval *1000000 )); + } +} + +static void test_fallback (data_t *data,bool is_mst) { +int dp_mst_outputs, retries; +igt_output_t *mst_outputs[IGT_MAX_PIPES ]; +enum dp_link_rate max_link_rate, curr_link_rate, prev_link_rate; + enum dp_lane_count max_lane_count, curr_lane_count,
prev_lane_count;tests/intel/kms_fallback.c new file +22
-0+uint32_t link_status_prop_id; +uint64_t link_status_value; +drmModeModeInfo *mst_modes[IGT_MAX_PIPES ], *mode; +drmModePropertyPtr link_status_prop; +struct igt_fb mst_fbs[IGT_MAX_PIPES ], fb; +struct igt_plane *mst_primarys[IGT_MAX_PIPES ], *primary; +struct udev_monitor *mon; + +igt_display_reset (&data->display); + retries =SPURIOUS_HPD_RETRY ; + +if (is_mst) { +if (!setup_mst (data, is_mst, mst_outputs, + &dp_mst_outputs, mst_modes, mst_fbs, + mst_primarys)) +return ; + }else { + data->pipe =PIPE_A ; +igt_output_set_pipe (data->output, data->pipe); + mode =igt_output_get_mode (data->output); + primary = igt_output_get_plane_type(data->output, +
DRM_PLANE_TYPE_PRIMARY);tests/intel/kms_fallback.c new file +26
-0+igt_create_color_fb (data->drm_fd, + mode->hdisplay, mode->vdisplay, +DRM_FORMAT_XRGB8888 , +DRM_FORMAT_MOD_LINEAR ,0.0 ,1.0 ,0.0 , + &fb); +igt_plane_set_fb (primary, &fb); +igt_display_commit2 (&data->display,COMMIT_ATOMIC ); + } + +igt_info ("Testing link training fallback on %s\n" , +igt_output_name (data->output)); + +igt_reset_link_params (data->drm_fd, data->output); +igt_assert_eq (check_condition_with_timeout (data->drm_fd, + data->output, + igt_get_dp_pending_retrain, +1.0 ,20.0 ),0 ); + + max_link_rate =igt_get_dp_max_link_rate (data->drm_fd, data->output); + max_lane_count =igt_get_dp_max_lane_count (data->drm_fd, +data->output); + +while (!igt_get_dp_link_retrain_disabled (data->drm_fd, + data->output)) { + + prev_link_rate = igt_get_dp_link_rate_set_for_output(data-Quoted 1 line
drm_fd,data->output);tests/intel/kms_fallback.c new file +1
-0+ prev_lane_count = igt_get_dp_lane_count_set_for_output(data-Quoted 1 line
drm_fd,tests/intel/kms_fallback.c new file +14
-0+data->output); + +igt_info ("Current link rate: %s, Current lane count: %s\n" , +str_link_rate (prev_link_rate), +str_lane_count (prev_lane_count)); + mon =igt_watch_uevents (); +igt_force_lt_failure (data->drm_fd, data->output, +LT_FAILURE_REDUCED_CAPS ); +igt_force_link_retrain (data->drm_fd, data->output, +RETRAIN_COUNT ); + + igt_assert_eq(check_condition_with_timeout(data->drm_fd, + data->output, +
igt_get_dp_pending_retrain,tests/intel/kms_fallback.c new file +4
-0+ 1.0, 20.0), 0); + igt_assert_eq(check_condition_with_timeout(data->drm_fd, + data->output, +
igt_get_dp_pending_lt_failures,tests/intel/kms_fallback.c new file +14
-0+ 1.0, 20.0), 0); + +if (igt_get_dp_link_retrain_disabled (data->drm_fd, + data->output)) { +igt_reset_connectors (); +return ; + } + +igt_assert_f (igt_hotplug_detected (mon,20 ), +"Didn't get hotplug for force link training failure\n" ); + + kmstest_get_property(data->drm_fd, + data->output->config.connector->connector_id, + DRM_MODE_OBJECT_CONNECTOR, "link-status",
tests/intel/kms_fallback.c new file +4
-0+ &link_status_prop_id, &link_status_value, + &link_status_prop); + + igt_assert_eq(link_status_value,
DRM_MODE_LINK_STATUS_BAD);tests/intel/kms_fallback.c new file +7
-0+ +igt_flush_uevents (mon); + +if (is_mst) { + igt_assert_f(validate_modeset_mst_output(data, + mst_outputs, +
&dp_mst_outputs,tests/intel/kms_fallback.c new file +3
-0+ mst_modes, + mst_fbs, +
mst_primarys),tests/intel/kms_fallback.c new file +16
-0+ "MST modeset failed\n"); + }else { + data->output->force_reprobe = true; +igt_output_refresh (data->output); + data->pipe =PIPE_A ; +igt_assert_f (fit_modes_in_bw (data), +"Unable to fit modes in bw\n" ); + +igt_output_set_pipe (data->output, data->pipe); + mode =igt_output_get_mode (data->output); +igt_info ("Mode %dx%d@%d on output %s\n" , + mode->hdisplay, mode->vdisplay, + mode->vrefresh, +igt_output_name (data->output)); + primary = igt_output_get_plane_type(data->output, +
DRM_PLANE_TYPE_PRIMARY);tests/intel/kms_fallback.c new file +11
-0+igt_create_color_fb (data->drm_fd, + mode->hdisplay, + mode->vdisplay, +DRM_FORMAT_XRGB8888 , +DRM_FORMAT_MOD_LINEAR , +0.0 ,1.0 ,0.0 , &fb); +igt_plane_set_fb (primary, &fb); + } + + kmstest_set_connector_link_status(data->drm_fd, + data->output-Quoted 1 line
config.connector,
+
DRM_MODE_LINK_STATUS_GOOD);tests/intel/kms_fallback.c new file +5
-0+igt_display_commit2 (&data->display,COMMIT_ATOMIC ); + + kmstest_get_property(data->drm_fd, + data->output->config.connector->connector_id, + DRM_MODE_OBJECT_CONNECTOR, "link-status",
tests/intel/kms_fallback.c new file +3
-0+ &link_status_prop_id, &link_status_value, + &link_status_prop); + igt_assert_eq(link_status_value,
DRM_MODE_LINK_STATUS_GOOD);tests/intel/kms_fallback.c new file +2
-0+ + curr_link_rate = igt_get_dp_link_rate_set_for_output(data-Quoted 1 line
drm_fd,data->output);tests/intel/kms_fallback.c new file +1
-0+ curr_lane_count = igt_get_dp_lane_count_set_for_output(data-Quoted 1 line
drm_fd,tests/intel/kms_fallback.c new file +5
-0+data->output); + + igt_assert_f((curr_link_rate < prev_link_rate || + curr_lane_count < prev_lane_count) || + ((curr_link_rate == max_link_rate &&
curr_lane_count==max_lane_count) && --retries),tests/intel/kms_fallback.c new file +30
-0+ "Fallback unsuccessful\n"); + + prev_link_rate = curr_link_rate; + prev_lane_count = curr_lane_count; + } +} + +igt_main +{ +data_t data = {}; + + igt_fixture { + data.drm_fd =drm_open_driver_master (DRIVER_INTEL | +DRIVER_XE ); +kmstest_set_vt_graphics_mode (); +igt_display_require (&data.display, data.drm_fd); +igt_display_require_output (&data.display); +for_each_pipe (&data.display, data.pipe) { + data.n_pipes++; + } + } + + igt_subtest("dp-fallback") { +bool ran = false; +igt_output_t *output; + +for_each_connected_output (&data.display, output) { + + data.output = output; + if(!igt_has_force_link_training_failure_debugfs(data.drm_fd, +
data.output)) {tests/intel/kms_fallback.c new file +1
-0+ igt_info("Output %s unsupported\n",
Quoted 1 line
igt_output_name(data.output));
If possible, we can convert this message to a more user-friendly way.
Igt_info("Output %s doesn't support force link training failure\n" Or anything similar.
Regards,
Pranay Samala
Quoted 48 lines
tests/intel/kms_fallback.c new file +4
-0+continue ; + } + + if (output->config.connector->connector_type !=
DRM_MODE_CONNECTOR_DisplayPort) {tests/intel/kms_fallback.c new file +1
-0+ igt_info("Skipping output %s as it's not DP\n",
output->name);tests/intel/kms_fallback.c new file +27
-0+continue ; + } + + ran = true; + +/* +* Check output is MST +*/ +if (igt_check_output_is_dp_mst (data.output)) { +igt_info ("Testing MST output %s\n" , +igt_output_name (data.output)); +test_fallback (&data, true); + }else { +igt_info ("Testing DP output %s\n" , +igt_output_name (data.output)); +test_fallback (&data, false); + } + } +igt_require_f (ran,"No output supports fallback\n" ); + } + + igt_fixture { +igt_remove_fb (data.drm_fd, &data.fb); +igt_display_fini (&data.display); +close (data.drm_fd); + } +}tests/meson.build index 00556c9d6..86fab423b renamed from tests/meson.build +0
-0100644
tests/meson.build +1
-1@@ -249,6 +249,7 @@ intel_kms_progs = [ 'kms_dirtyfb', 'kms_draw_crc', 'kms_dsc', + 'kms_fallback', 'kms_fb_coherency', 'kms_fbcon_fbt', 'kms_fence_pin_leak', --2.34.1
Re: [PATCH i-g-t 13/14] tests/intel/kms_dp_fallback: add test for validating fallback
In reply to Kunal JoshiQuoted 56 lines · Kunal Joshi
add test to valdiate fallback for DP connector,
eDP subtest will be added later.How does test validates fallback?
- test start by doing initial modeset on default mode (if connector is DP then we enable just that connector, if its DP-MST we enable all on the same topology)
- force link training failures and retrain until we reach lowest param or retrain is disabled
- expect hotplug and link-status to turn bad
- expect link params reduce after fallbackv2: add test for mst (imre)
refresh mode list (imre)
monitor got hotplugs (imre)
check link parameter are reduced (imre)v3: call
check_fn(Santosh)v4: handle buggy lg monitor (Imre)
remove reset in between (Imre)v5: fit modes wrt to bw in non-mst case as well
Cc Imre Deak <[email protected]>Signed-off-by Kunal Joshi <[email protected]>Suggested-by Imre Deak <[email protected]>--- tests/intel/kms_fallback.c | 515 +++++++++++++++++++++++++++++++++++++ tests/meson.build | 1 + 2 files changed, 516 insertions(+) create mode 100644 tests/intel/kms_fallback.ctests/intel/kms_fallback.c new file +17
-0@@ -0,0 +1,515 @@ +/* SPDX-License-Identifier: MIT */ +/* +* Copyright © 2024 Intel Corporation +*/ + +/** +* TEST: kms fallback +* Category: Display +* Description: Test link training fallback for eDP/DP connectors +* Driver requirement: i915, xe +* Functionality: link training +* Mega feature: General Display Features +* Test category: functionality test +*/ + +#include <sys/types.h> +
tests/intel/kms_fallback.c line 27
Quoted 10 lines
tests/intel/kms_fallback.c new file +10
-0+#include "igt.h" +#include "igt_psr.h" + +/** +* SUBTEST: dp-fallback +* Description: Test fallback on DP connectors +*/ + +#define RETRAIN_COUNT 1 +#define LT_FAILURE_SAME_CAPS 1
This is not used. Maybe add a comment instead why 2 LT failure will lead to reducing the link params?
Quoted 308 lines
tests/intel/kms_fallback.c new file +308
-0+#define LT_FAILURE_REDUCED_CAPS 2 +#define SPURIOUS_HPD_RETRY 3 + +static int traversed_mst_outputs[IGT_MAX_PIPES ]; +static int traversed_mst_output_count; +typedef struct { +int drm_fd; +igt_display_t display; +drmModeModeInfo *mode; +igt_output_t *output; +enum pipe pipe; +struct igt_fb fb; +struct igt_plane *primary; +int n_pipes; +}data_t ; + +typedef int (*condition_check_fn )(int drm_fd,igt_output_t *output); + +IGT_TEST_DESCRIPTION ("Test link training fallback" ); + +static const char *str_link_rate (enum dp_link_rate link_rate) +{ +switch (link_rate) { +case DP_LINK_RATE_162000 : +return "1.62 Gbps" ; +case DP_LINK_RATE_216000 : +return "2.16 Gbps" ; +case DP_LINK_RATE_243000 : +return "2.43 Gbps" ; +case DP_LINK_RATE_270000 : +return "2.70 Gbps" ; +case DP_LINK_RATE_324000 : +return "3.24 Gbps" ; +case DP_LINK_RATE_432000 : +return "4.32 Gbps" ; +case DP_LINK_RATE_540000 : +return "5.40 Gbps" ; +case DP_LINK_RATE_675000 : +return "6.75 Gbps" ; +case DP_LINK_RATE_810000 : +return "8.10 Gbps" ; +case DP_LINK_RATE_1000000 : +return "10.00 Gbps" ; +case DP_LINK_RATE_1350000 : +return "13.50 Gbps" ; +case DP_LINK_RATE_2000000 : +return "20.00 Gbps" ; +default : +igt_assert_f (0 ,"Invalid link rate %d\n" , link_rate); + } +} + +static const char *str_lane_count (enum dp_lane_count lane_count) +{ +switch (lane_count) { +case DP_LANE_COUNT_1 : +return "1" ; +case DP_LANE_COUNT_2 : +return "2" ; +case DP_LANE_COUNT_4 : +return "4" ; +default : +igt_assert_f (0 ,"Invalid lane count %d\n" , lane_count); + } +} + +static void find_mst_outputs (int drm_fd,data_t *data, +igt_output_t *output, +igt_output_t **mst_outputs, +int *num_mst_outputs) +{ +bool is_output_mst; +uint64_t path_blob_id; +igt_output_t *connector_output; +drmModePropertyPtr path_prop =NULL ; +drmModePropertyPtr connector_path_prop =NULL ; + +igt_assert_f (output,"Invalid output\n" ); + +/* +* Check if given output is MST by checking if it has PATH property +*/ + is_output_mst =kmstest_get_property (drm_fd, + output->config.connector->connector_id, +DRM_MODE_OBJECT_CONNECTOR ,"PATH" ,NULL , + &path_blob_id, &path_prop); + +if (!is_output_mst) +return ; + +/* +* If output is MST check all other connected output which shares +* same path and fill mst_outputs and num_mst_outputs +*/ +for_each_connected_output (&data->display, connector_output) { + + connector_path_prop =NULL ; + +kmstest_get_property (drm_fd, + connector_output->config.connector->connector_id, +DRM_MODE_OBJECT_CONNECTOR ,"PATH" , +NULL , &path_blob_id, + &connector_path_prop); + +if (connector_path_prop && path_prop && + connector_path_prop->prop_id == path_prop->prop_id) + mst_outputs[(*num_mst_outputs)++] = connector_output; + +if (connector_path_prop) +drmModeFreeProperty (connector_path_prop); + } +if (path_prop) +drmModeFreeProperty (path_prop); +} + +static bool setup_mst_outputs (data_t *data,igt_output_t *mst_output[], +int *dp_mst_outputs) +{ +int i; +igt_output_t *output; + +igt_require_f (igt_check_output_is_dp_mst (data->output), +"Not a valid MST connector\n" ); + +/* +* Check if this is already traversed +*/ +for (i =0 ; i < traversed_mst_output_count; i++) +if (traversed_mst_outputs[i] == data->output->config.connector->connector_id) +return false; + +find_mst_outputs (data->drm_fd, data, data->output, + mst_output, dp_mst_outputs); + +for (i =0 ; i < *dp_mst_outputs; i++) { + output = mst_output[i]; + traversed_mst_outputs[traversed_mst_output_count++] = output->config.connector->connector_id; +igt_info ("Output %s is in same topology as %s\n" , +igt_output_name (output), +igt_output_name (data->output)); + } + +return true; +} + +static void setup_pipe_on_mst_outputs (data_t *data, +igt_output_t *mst_output[], +int *dp_mst_outputs) +{ +int i =0 ; + +igt_require_f (data->n_pipes >= *dp_mst_outputs, +"Need %d pipes to assign to %d MST outputs\n" , + data->n_pipes, *dp_mst_outputs); + +for_each_pipe (&data->display, data->pipe) { +if (i >= *dp_mst_outputs) +break ; +igt_info ("Setting pipe %s on output %s\n" , +kmstest_pipe_name (data->pipe), +igt_output_name (mst_output[i])); +igt_output_set_pipe (mst_output[i++], data->pipe); + } +} + +static void setup_modeset_on_mst_outputs (data_t *data, +igt_output_t *mst_output[], +int *dp_mst_outputs, +drmModeModeInfo *mode[], +struct igt_fb fb[], +struct igt_plane *primary[]) +{ +int i; + +for (i =0 ; i < *dp_mst_outputs; i++) { + mst_output[i]->force_reprobe = true; +igt_output_refresh (mst_output[i]); + mode[i] =igt_output_get_mode (mst_output[i]); +igt_info ("Mode %dx%d@%d on output %s\n" , + mode[i]->hdisplay, mode[i]->vdisplay, + mode[i]->vrefresh, +igt_output_name (mst_output[i])); + primary[i] =igt_output_get_plane_type (mst_output[i], +DRM_PLANE_TYPE_PRIMARY ); +igt_create_color_fb (data->drm_fd, + mode[i]->hdisplay, + mode[i]->vdisplay, +DRM_FORMAT_XRGB8888 , +DRM_FORMAT_MOD_LINEAR ,0.0 ,1.0 ,0.0 , + &fb[i]); +igt_plane_set_fb (primary[i], &fb[i]); + } +} + +static bool fit_modes_in_bw (data_t *data) +{ +bool found; +int ret; + +if (!igt_display_try_commit2 (&data->display,COMMIT_ATOMIC )) { +igt_info ("Modes overridden\n" ); + found =igt_override_all_active_output_modes_to_fit_bw (&data->display); +igt_require_f (found, +"No valid mode combo found for MST modeset\n" ); + ret =igt_display_try_commit2 (&data->display,COMMIT_ATOMIC ); +igt_require_f (ret ==0 , +"Commit failure during MST modeset\n" ); + } +return true; +} + +static bool validate_modeset_mst_output (data_t *data, +igt_output_t *mst_output[], +int *dp_mst_outputs, +drmModeModeInfo *mode[], +struct igt_fb fb[], +struct igt_plane *primary[]) +{ + +igt_require_f (*dp_mst_outputs >0 ,"No MST outputs found\n" ); +setup_pipe_on_mst_outputs (data, mst_output, dp_mst_outputs); +setup_modeset_on_mst_outputs (data, mst_output, + dp_mst_outputs, + mode, fb, primary); +igt_assert_f (fit_modes_in_bw (data),"Unable to fit modes in bw\n" ); +return true; +} + +static bool setup_mst (data_t *data,bool is_mst, +igt_output_t *mst_output[], +int *dp_mst_outputs,drmModeModeInfo *mode[], +struct igt_fb fb[],struct igt_plane *primary[]) +{ +bool ret; + + *dp_mst_outputs =0 ; + ret =setup_mst_outputs (data, mst_output, dp_mst_outputs); +if (!ret) { +igt_info ("Skipping MST output %s as already tested\n" , +igt_output_name (data->output)); +return false; + } + + ret =validate_modeset_mst_output (data, mst_output, + dp_mst_outputs, mode, + fb, primary); +if (!ret) { +igt_info ("Skipping MST output %s as validpipe/output combo not found\n" , +igt_output_name (data->output)); +return false; + } + +igt_display_commit2 (&data->display,COMMIT_ATOMIC ); +return true; +} + +static int check_condition_with_timeout (int drm_fd,igt_output_t *output, +condition_check_fn check_fn, +double interval,double timeout) +{ +struct timespec start_time, current_time; +double elapsed_time; + +clock_gettime (CLOCK_MONOTONIC , &start_time); + +while (1 ) { +if (check_fn (drm_fd, output) ==0 ) { +return 0 ; + } + +clock_gettime (CLOCK_MONOTONIC , ¤t_time); + elapsed_time = (current_time.tv_sec - start_time.tv_sec) + + (current_time.tv_nsec - start_time.tv_nsec) /1e9 ; + +if (elapsed_time >= timeout) { +return -1 ; + } + +usleep ((useconds_t)(interval *1000000 )); + } +} + +static void test_fallback (data_t *data,bool is_mst) +{ +int dp_mst_outputs, retries; +igt_output_t *mst_outputs[IGT_MAX_PIPES ]; +enum dp_link_rate max_link_rate, curr_link_rate, prev_link_rate; +enum dp_lane_count max_lane_count, curr_lane_count, prev_lane_count; +uint32_t link_status_prop_id; +uint64_t link_status_value; +drmModeModeInfo *mst_modes[IGT_MAX_PIPES ], *mode; +drmModePropertyPtr link_status_prop; +struct igt_fb mst_fbs[IGT_MAX_PIPES ], fb; +struct igt_plane *mst_primarys[IGT_MAX_PIPES ], *primary; +struct udev_monitor *mon; + +igt_display_reset (&data->display); + retries =SPURIOUS_HPD_RETRY ; + +if (is_mst) { +if (!setup_mst (data, is_mst, mst_outputs, + &dp_mst_outputs, mst_modes, mst_fbs, + mst_primarys)) +return ; + }else { + data->pipe =PIPE_A ; +igt_output_set_pipe (data->output, data->pipe); + mode =igt_output_get_mode (data->output);
tests/intel/kms_fallback.c line 345
Quoted 10 lines
tests/intel/kms_fallback.c new file +10
-0+ primary =igt_output_get_plane_type (data->output, +DRM_PLANE_TYPE_PRIMARY ); +igt_create_color_fb (data->drm_fd, + mode->hdisplay, mode->vdisplay, +DRM_FORMAT_XRGB8888 , +DRM_FORMAT_MOD_LINEAR ,0.0 ,1.0 ,0.0 , + &fb); +igt_plane_set_fb (primary, &fb); +igt_display_commit2 (&data->display,COMMIT_ATOMIC ); + }
Would be better to have a separate function for the above and make dp_mst_outputs more generic, also used for the non-MST case (adding to the array then only a single output).
tests/intel/kms_fallback.c line 350
Quoted 5 lines
tests/intel/kms_fallback.c new file +5
-0+ +igt_info ("Testing link training fallback on %s\n" , +igt_output_name (data->output)); + +igt_reset_link_params (data->drm_fd, data->output);
Could this be done before the above setup part? Then the modes chosen there should be based already on the updated link params and the commit would also retrain the link if needed.
tests/intel/kms_fallback.c line 361
Quoted 11 lines
tests/intel/kms_fallback.c new file +11
-0+igt_assert_eq (check_condition_with_timeout (data->drm_fd, + data->output, + igt_get_dp_pending_retrain, +1.0 ,20.0 ),0 ); + + max_link_rate =igt_get_dp_max_link_rate (data->drm_fd, data->output); + max_lane_count =igt_get_dp_max_lane_count (data->drm_fd, data->output); + +while (!igt_get_dp_link_retrain_disabled (data->drm_fd, + data->output)) { +
Extra w/s.
tests/intel/kms_fallback.c line 363
Quoted 2 lines
tests/intel/kms_fallback.c new file +2
-0+ prev_link_rate =igt_get_dp_link_rate_set_for_output (data->drm_fd, data->output); + prev_lane_count =igt_get_dp_lane_count_set_for_output (data->drm_fd, data->output);
Moving these before the loop would avoid the duplication wrt. setting them at the end of the loop.
Quoted 59 lines
tests/intel/kms_fallback.c new file +59
-0+ +igt_info ("Current link rate: %s, Current lane count: %s\n" , +str_link_rate (prev_link_rate), +str_lane_count (prev_lane_count)); + mon =igt_watch_uevents (); +igt_force_lt_failure (data->drm_fd, data->output, +LT_FAILURE_REDUCED_CAPS ); +igt_force_link_retrain (data->drm_fd, data->output, +RETRAIN_COUNT ); + +igt_assert_eq (check_condition_with_timeout (data->drm_fd, + data->output, + igt_get_dp_pending_retrain, +1.0 ,20.0 ),0 ); +igt_assert_eq (check_condition_with_timeout (data->drm_fd, + data->output, + igt_get_dp_pending_lt_failures, +1.0 ,20.0 ),0 ); + +if (igt_get_dp_link_retrain_disabled (data->drm_fd, + data->output)) { +igt_reset_connectors (); +return ; + } + +igt_assert_f (igt_hotplug_detected (mon,20 ), +"Didn't get hotplug for force link training failure\n" ); + +kmstest_get_property (data->drm_fd, + data->output->config.connector->connector_id, +DRM_MODE_OBJECT_CONNECTOR ,"link-status" , + &link_status_prop_id, &link_status_value, + &link_status_prop); + +igt_assert_eq (link_status_value,DRM_MODE_LINK_STATUS_BAD ); + +igt_flush_uevents (mon); + +if (is_mst) { +igt_assert_f (validate_modeset_mst_output (data, + mst_outputs, + &dp_mst_outputs, + mst_modes, + mst_fbs, + mst_primarys), +"MST modeset failed\n" ); + }else { + data->output->force_reprobe = true; +igt_output_refresh (data->output); + data->pipe =PIPE_A ; +igt_assert_f (fit_modes_in_bw (data), +"Unable to fit modes in bw\n" ); + +igt_output_set_pipe (data->output, data->pipe); + mode =igt_output_get_mode (data->output); +igt_info ("Mode %dx%d@%d on output %s\n" , + mode->hdisplay, mode->vdisplay, + mode->vrefresh, +igt_output_name (data->output));
tests/intel/kms_fallback.c line 432
Quoted 10 lines
tests/intel/kms_fallback.c new file +10
-0+ primary =igt_output_get_plane_type (data->output, +DRM_PLANE_TYPE_PRIMARY ); +igt_create_color_fb (data->drm_fd, + mode->hdisplay, + mode->vdisplay, +DRM_FORMAT_XRGB8888 , +DRM_FORMAT_MOD_LINEAR , +0.0 ,1.0 ,0.0 , &fb); +igt_plane_set_fb (primary, &fb); + }
The above would be better in a separate function and make the MST and non-MST cases more unified. For instance setup_modeset_on_mst_outputs() looks quite similar to the above non-MST setup.
tests/intel/kms_fallback.c line 441
Quoted 9 lines
tests/intel/kms_fallback.c new file +9
-0+ +kmstest_set_connector_link_status (data->drm_fd, + data->output->config.connector, +DRM_MODE_LINK_STATUS_GOOD ); +igt_display_commit2 (&data->display,COMMIT_ATOMIC ); + + kmstest_get_property(data->drm_fd, + data->output->config.connector->connector_id, + DRM_MODE_OBJECT_CONNECTOR, "link-status",
Could use the cached property name here instead of hard-coding it.
tests/intel/kms_fallback.c line 452
Quoted 11 lines
tests/intel/kms_fallback.c new file +11
-0+ &link_status_prop_id, &link_status_value, + &link_status_prop); +igt_assert_eq (link_status_value,DRM_MODE_LINK_STATUS_GOOD ); + + curr_link_rate =igt_get_dp_link_rate_set_for_output (data->drm_fd, data->output); + curr_lane_count =igt_get_dp_lane_count_set_for_output (data->drm_fd, data->output); + +igt_assert_f ((curr_link_rate < prev_link_rate || + curr_lane_count < prev_lane_count) || + ((curr_link_rate == max_link_rate && curr_lane_count == max_lane_count) && --retries), +"Fallback unsuccessful\n" );
I wonder if having separate asserts would make it easier to parse the logs.
Quoted 7 lines
tests/intel/kms_fallback.c new file +7
-0+ + prev_link_rate = curr_link_rate; + prev_lane_count = curr_lane_count; + } +} + +igt_main
tests/intel/kms_fallback.c line 469
Quoted 10 lines
tests/intel/kms_fallback.c new file +10
-0+{ +data_t data = {}; + + igt_fixture { + data.drm_fd =drm_open_driver_master (DRIVER_INTEL | +DRIVER_XE ); +kmstest_set_vt_graphics_mode (); +igt_display_require (&data.display, data.drm_fd); +igt_display_require_output (&data.display); +for_each_pipe (&data.display, data.pipe) {
One liners don't the { }.
tests/intel/kms_fallback.c line 479
Quoted 10 lines
tests/intel/kms_fallback.c new file +10
-0+ data.n_pipes++; + } + } + + igt_subtest("dp-fallback") { +bool ran = false; +igt_output_t *output; + +for_each_connected_output (&data.display, output) { +
Extra w/s.
Quoted 18 lines
tests/intel/kms_fallback.c new file +18
-0+ data.output = output; +if (!igt_has_force_link_training_failure_debugfs (data.drm_fd, + data.output)) { +igt_info ("Output %s unsupported\n" ,igt_output_name (data.output)); +continue ; + } + +if (output->config.connector->connector_type != DRM_MODE_CONNECTOR_DisplayPort) { +igt_info ("Skipping output %s as it's not DP\n" , output->name); +continue ; + } + + ran = true; + +/* +* Check output is MST +*/ +if (igt_check_output_is_dp_mst (data.output)) {
tests/intel/kms_fallback.c line 507
Quoted 10 lines
tests/intel/kms_fallback.c new file +10
-0+igt_info ("Testing MST output %s\n" , +igt_output_name (data.output)); +test_fallback (&data, true); + }else { +igt_info ("Testing DP output %s\n" , +igt_output_name (data.output)); +test_fallback (&data, false); + } + } +igt_require_f (ran,"No output supports fallback\n" );
Would be better to have a separate function for the above.
Quoted 23 lines
tests/intel/kms_fallback.c new file +8
-0+ } + + igt_fixture { +igt_remove_fb (data.drm_fd, &data.fb); +igt_display_fini (&data.display); +close (data.drm_fd); + } +}tests/meson.build +1
-0@@ -249,6 +249,7 @@ intel_kms_progs = [ 'kms_dirtyfb', 'kms_draw_crc', 'kms_dsc', + 'kms_fallback', 'kms_fb_coherency', 'kms_fbcon_fbt', 'kms_fence_pin_leak',Signature · 1 line
2.34.1
RE: [PATCH i-g-t 13/14] tests/intel/kms_dp_fallback: add test for validating fallback
Hello Imre,
-----Original Message-----
From: Deak, Imre <[email protected]>
Sent: Tuesday, September 3, 2024 8:25 PM
To: Joshi, Kunal1 <[email protected]>
Cc: [email protected]
Subject: Re: [PATCH i-g-t 13/14] tests/intel/kms_dp_fallback: add test for validating fallback
Quoted 53 lines · Kunal Joshi
add test to valdiate fallback for DP connector, eDP subtest will be added later.
How does test validates fallback?
- test start by doing initial modeset on default mode (if connector is DP then we enable just that connector, if its DP-MST we enable all on the same topology)
- force link training failures and retrain until we reach lowest param or retrain is disabled
- expect hotplug and link-status to turn bad
- expect link params reduce after fallbackv2: add test for mst (imre)
refresh mode list (imre)
monitor got hotplugs (imre)
check link parameter are reduced (imre)v3: call
check_fn(Santosh)v4: handle buggy lg monitor (Imre)
remove reset in between (Imre)v5: fit modes wrt to bw in non-mst case as well
Cc Imre Deak <[email protected]>Signed-off-by Kunal Joshi <[email protected]>Suggested-by Imre Deak <[email protected]>--- tests/intel/kms_fallback.c | 515 +++++++++++++++++++++++++++++++++++++ tests/meson.build | 1 + 2 files changed, 516 insertions(+) create mode 100644 tests/intel/kms_fallback.ctests/intel/kms_fallback.c new file +15
-0@@ -0,0 +1,515 @@ +/* SPDX-License-Identifier: MIT */ +/* +* Copyright (c) 2024 Intel Corporation */ + +/** +* TEST: kms fallback +* Category: Display +* Description: Test link training fallback for eDP/DP connectors +* Driver requirement: i915, xe +* Functionality: link training +* Mega feature: General Display Features +* Test category: functionality test +*/ + +#include <sys/types.h>
tests/intel/kms_fallback.c line 25
Quoted 10 lines
tests/intel/kms_fallback.c new file +10
-0+ +#include "igt.h" +#include "igt_psr.h" + +/** +* SUBTEST: dp-fallback +* Description: Test fallback on DP connectors */ + +#define RETRAIN_COUNT 1 +#define LT_FAILURE_SAME_CAPS 1
This is not used. Maybe add a comment instead why 2 LT failure will lead to reducing the link params?
----------------------------------------------------------------------------------------------
Ok will remove LT_FAILURE_SAME_CAPS and add a comment for LT_FAILURE_REDUCED_CAPS
Quoted 301 lines
tests/intel/kms_fallback.c new file +301
-0+#define LT_FAILURE_REDUCED_CAPS 2 +#define SPURIOUS_HPD_RETRY 3 + +static int traversed_mst_outputs[IGT_MAX_PIPES ]; +static int traversed_mst_output_count;typedef struct { +int drm_fd; +igt_display_t display; +drmModeModeInfo *mode; +igt_output_t *output; +enum pipe pipe; +struct igt_fb fb; +struct igt_plane *primary; +int n_pipes; +}data_t ; + +typedef int (*condition_check_fn )(int drm_fd,igt_output_t *output); + +IGT_TEST_DESCRIPTION ("Test link training fallback" ); + +static const char *str_link_rate (enum dp_link_rate link_rate) { +switch (link_rate) { +case DP_LINK_RATE_162000 : +return "1.62 Gbps" ; +case DP_LINK_RATE_216000 : +return "2.16 Gbps" ; +case DP_LINK_RATE_243000 : +return "2.43 Gbps" ; +case DP_LINK_RATE_270000 : +return "2.70 Gbps" ; +case DP_LINK_RATE_324000 : +return "3.24 Gbps" ; +case DP_LINK_RATE_432000 : +return "4.32 Gbps" ; +case DP_LINK_RATE_540000 : +return "5.40 Gbps" ; +case DP_LINK_RATE_675000 : +return "6.75 Gbps" ; +case DP_LINK_RATE_810000 : +return "8.10 Gbps" ; +case DP_LINK_RATE_1000000 : +return "10.00 Gbps" ; +case DP_LINK_RATE_1350000 : +return "13.50 Gbps" ; +case DP_LINK_RATE_2000000 : +return "20.00 Gbps" ; +default : +igt_assert_f (0 ,"Invalid link rate %d\n" , link_rate); + } +} + +static const char *str_lane_count (enum dp_lane_count lane_count) { +switch (lane_count) { +case DP_LANE_COUNT_1 : +return "1" ; +case DP_LANE_COUNT_2 : +return "2" ; +case DP_LANE_COUNT_4 : +return "4" ; +default : +igt_assert_f (0 ,"Invalid lane count %d\n" , lane_count); + } +} + +static void find_mst_outputs (int drm_fd,data_t *data, +igt_output_t *output, +igt_output_t **mst_outputs, +int *num_mst_outputs) +{ +bool is_output_mst; +uint64_t path_blob_id; +igt_output_t *connector_output; +drmModePropertyPtr path_prop =NULL ; +drmModePropertyPtr connector_path_prop =NULL ; + +igt_assert_f (output,"Invalid output\n" ); + +/* +* Check if given output is MST by checking if it has PATH property +*/ + is_output_mst =kmstest_get_property (drm_fd, + output->config.connector->connector_id, +DRM_MODE_OBJECT_CONNECTOR ,"PATH" ,NULL , + &path_blob_id, &path_prop); + +if (!is_output_mst) +return ; + +/* +* If output is MST check all other connected output which shares +* same path and fill mst_outputs and num_mst_outputs +*/ +for_each_connected_output (&data->display, connector_output) { + + connector_path_prop =NULL ; + +kmstest_get_property (drm_fd, + connector_output->config.connector->connector_id, +DRM_MODE_OBJECT_CONNECTOR ,"PATH" , +NULL , &path_blob_id, + &connector_path_prop); + +if (connector_path_prop && path_prop && + connector_path_prop->prop_id == path_prop->prop_id) + mst_outputs[(*num_mst_outputs)++] = connector_output; + +if (connector_path_prop) +drmModeFreeProperty (connector_path_prop); + } +if (path_prop) +drmModeFreeProperty (path_prop); +} + +static bool setup_mst_outputs (data_t *data,igt_output_t *mst_output[], +int *dp_mst_outputs) +{ +int i; +igt_output_t *output; + +igt_require_f (igt_check_output_is_dp_mst (data->output), +"Not a valid MST connector\n" ); + +/* +* Check if this is already traversed +*/ +for (i =0 ; i < traversed_mst_output_count; i++) +if (traversed_mst_outputs[i] == data->output->config.connector->connector_id) +return false; + +find_mst_outputs (data->drm_fd, data, data->output, + mst_output, dp_mst_outputs); + +for (i =0 ; i < *dp_mst_outputs; i++) { + output = mst_output[i]; + traversed_mst_outputs[traversed_mst_output_count++] = output->config.connector->connector_id; +igt_info ("Output %s is in same topology as %s\n" , +igt_output_name (output), +igt_output_name (data->output)); + } + +return true; +} + +static void setup_pipe_on_mst_outputs (data_t *data, +igt_output_t *mst_output[], +int *dp_mst_outputs) +{ +int i =0 ; + +igt_require_f (data->n_pipes >= *dp_mst_outputs, +"Need %d pipes to assign to %d MST outputs\n" , + data->n_pipes, *dp_mst_outputs); + +for_each_pipe (&data->display, data->pipe) { +if (i >= *dp_mst_outputs) +break ; +igt_info ("Setting pipe %s on output %s\n" , +kmstest_pipe_name (data->pipe), +igt_output_name (mst_output[i])); +igt_output_set_pipe (mst_output[i++], data->pipe); + } +} + +static void setup_modeset_on_mst_outputs (data_t *data, +igt_output_t *mst_output[], +int *dp_mst_outputs, +drmModeModeInfo *mode[], +struct igt_fb fb[], +struct igt_plane *primary[]) +{ +int i; + +for (i =0 ; i < *dp_mst_outputs; i++) { + mst_output[i]->force_reprobe = true; +igt_output_refresh (mst_output[i]); + mode[i] =igt_output_get_mode (mst_output[i]); +igt_info ("Mode %dx%d@%d on output %s\n" , + mode[i]->hdisplay, mode[i]->vdisplay, + mode[i]->vrefresh, +igt_output_name (mst_output[i])); + primary[i] =igt_output_get_plane_type (mst_output[i], +DRM_PLANE_TYPE_PRIMARY ); +igt_create_color_fb (data->drm_fd, + mode[i]->hdisplay, + mode[i]->vdisplay, +DRM_FORMAT_XRGB8888 , +DRM_FORMAT_MOD_LINEAR ,0.0 ,1.0 ,0.0 , + &fb[i]); +igt_plane_set_fb (primary[i], &fb[i]); + } +} + +static bool fit_modes_in_bw (data_t *data) { +bool found; +int ret; + +if (!igt_display_try_commit2 (&data->display,COMMIT_ATOMIC )) { +igt_info ("Modes overridden\n" ); + found =igt_override_all_active_output_modes_to_fit_bw (&data->display); +igt_require_f (found, +"No valid mode combo found for MST modeset\n" ); + ret =igt_display_try_commit2 (&data->display,COMMIT_ATOMIC ); +igt_require_f (ret ==0 , +"Commit failure during MST modeset\n" ); + } +return true; +} + +static bool validate_modeset_mst_output (data_t *data, +igt_output_t *mst_output[], +int *dp_mst_outputs, +drmModeModeInfo *mode[], +struct igt_fb fb[], +struct igt_plane *primary[]) +{ + +igt_require_f (*dp_mst_outputs >0 ,"No MST outputs found\n" ); +setup_pipe_on_mst_outputs (data, mst_output, dp_mst_outputs); +setup_modeset_on_mst_outputs (data, mst_output, + dp_mst_outputs, + mode, fb, primary); +igt_assert_f (fit_modes_in_bw (data),"Unable to fit modes in bw\n" ); +return true; +} + +static bool setup_mst (data_t *data,bool is_mst, +igt_output_t *mst_output[], +int *dp_mst_outputs,drmModeModeInfo *mode[], +struct igt_fb fb[],struct igt_plane *primary[]) { +bool ret; + + *dp_mst_outputs =0 ; + ret =setup_mst_outputs (data, mst_output, dp_mst_outputs); +if (!ret) { +igt_info ("Skipping MST output %s as already tested\n" , +igt_output_name (data->output)); +return false; + } + + ret =validate_modeset_mst_output (data, mst_output, + dp_mst_outputs, mode, + fb, primary); +if (!ret) { +igt_info ("Skipping MST output %s as validpipe/output combo not found\n" , +igt_output_name (data->output)); +return false; + } + +igt_display_commit2 (&data->display,COMMIT_ATOMIC ); +return true; +} + +static int check_condition_with_timeout (int drm_fd,igt_output_t *output, +condition_check_fn check_fn, +double interval,double timeout) { +struct timespec start_time, current_time; +double elapsed_time; + +clock_gettime (CLOCK_MONOTONIC , &start_time); + +while (1 ) { +if (check_fn (drm_fd, output) ==0 ) { +return 0 ; + } + +clock_gettime (CLOCK_MONOTONIC , ¤t_time); + elapsed_time = (current_time.tv_sec - start_time.tv_sec) + + (current_time.tv_nsec - start_time.tv_nsec) /1e9 ; + +if (elapsed_time >= timeout) { +return -1 ; + } + +usleep ((useconds_t)(interval *1000000 )); + } +} + +static void test_fallback (data_t *data,bool is_mst) { +int dp_mst_outputs, retries; +igt_output_t *mst_outputs[IGT_MAX_PIPES ]; +enum dp_link_rate max_link_rate, curr_link_rate, prev_link_rate; +enum dp_lane_count max_lane_count, curr_lane_count, prev_lane_count; +uint32_t link_status_prop_id; +uint64_t link_status_value; +drmModeModeInfo *mst_modes[IGT_MAX_PIPES ], *mode; +drmModePropertyPtr link_status_prop; +struct igt_fb mst_fbs[IGT_MAX_PIPES ], fb; +struct igt_plane *mst_primarys[IGT_MAX_PIPES ], *primary; +struct udev_monitor *mon; + +igt_display_reset (&data->display); + retries =SPURIOUS_HPD_RETRY ; + +if (is_mst) { +if (!setup_mst (data, is_mst, mst_outputs, + &dp_mst_outputs, mst_modes, mst_fbs, + mst_primarys)) +return ; + }else { + data->pipe =PIPE_A ; +igt_output_set_pipe (data->output, data->pipe); + mode =igt_output_get_mode (data->output);
tests/intel/kms_fallback.c line 345
Quoted 10 lines
tests/intel/kms_fallback.c new file +10
-0+ primary =igt_output_get_plane_type (data->output, +DRM_PLANE_TYPE_PRIMARY ); +igt_create_color_fb (data->drm_fd, + mode->hdisplay, mode->vdisplay, +DRM_FORMAT_XRGB8888 , +DRM_FORMAT_MOD_LINEAR ,0.0 ,1.0 ,0.0 , + &fb); +igt_plane_set_fb (primary, &fb); +igt_display_commit2 (&data->display,COMMIT_ATOMIC ); + }
Would be better to have a separate function for the above and make dp_mst_outputs more generic, also used for the non-MST case (adding to the array then only a single output).
----------------------------------------------------------------------------------------------
Ok sure will reuse the mst functions after renaming them
tests/intel/kms_fallback.c line 350
Quoted 5 lines
tests/intel/kms_fallback.c new file +5
-0+ +igt_info ("Testing link training fallback on %s\n" , +igt_output_name (data->output)); + +igt_reset_link_params (data->drm_fd, data->output);
Could this be done before the above setup part? Then the modes chosen there should be based already on the updated link params and the commit would also retrain the link if needed.
----------------------------------------------------------------------------------------------
Ok sure will do as suggested
tests/intel/kms_fallback.c line 361
Quoted 12 lines
tests/intel/kms_fallback.c new file +12
-0+igt_assert_eq (check_condition_with_timeout (data->drm_fd, + data->output, + igt_get_dp_pending_retrain, +1.0 ,20.0 ),0 ); + + max_link_rate =igt_get_dp_max_link_rate (data->drm_fd, data->output); + max_lane_count =igt_get_dp_max_lane_count (data->drm_fd, +data->output); + +while (!igt_get_dp_link_retrain_disabled (data->drm_fd, + data->output)) { +
Extra w/s.
----------------------------------------------------------------------------------------------
Noted
tests/intel/kms_fallback.c line 356
Quoted 3 lines
tests/intel/kms_fallback.c new file +3
-0+ prev_link_rate =igt_get_dp_link_rate_set_for_output (data->drm_fd, data->output); + prev_lane_count = +igt_get_dp_lane_count_set_for_output (data->drm_fd, data->output);
Moving these before the loop would avoid the duplication wrt. setting them at the end of the loop.
----------------------------------------------------------------------------------------------
Right will move this out of the loop
Quoted 59 lines
tests/intel/kms_fallback.c new file +59
-0+ +igt_info ("Current link rate: %s, Current lane count: %s\n" , +str_link_rate (prev_link_rate), +str_lane_count (prev_lane_count)); + mon =igt_watch_uevents (); +igt_force_lt_failure (data->drm_fd, data->output, +LT_FAILURE_REDUCED_CAPS ); +igt_force_link_retrain (data->drm_fd, data->output, +RETRAIN_COUNT ); + +igt_assert_eq (check_condition_with_timeout (data->drm_fd, + data->output, + igt_get_dp_pending_retrain, +1.0 ,20.0 ),0 ); +igt_assert_eq (check_condition_with_timeout (data->drm_fd, + data->output, + igt_get_dp_pending_lt_failures, +1.0 ,20.0 ),0 ); + +if (igt_get_dp_link_retrain_disabled (data->drm_fd, + data->output)) { +igt_reset_connectors (); +return ; + } + +igt_assert_f (igt_hotplug_detected (mon,20 ), +"Didn't get hotplug for force link training failure\n" ); + +kmstest_get_property (data->drm_fd, + data->output->config.connector->connector_id, +DRM_MODE_OBJECT_CONNECTOR ,"link-status" , + &link_status_prop_id, &link_status_value, + &link_status_prop); + +igt_assert_eq (link_status_value,DRM_MODE_LINK_STATUS_BAD ); + +igt_flush_uevents (mon); + +if (is_mst) { +igt_assert_f (validate_modeset_mst_output (data, + mst_outputs, + &dp_mst_outputs, + mst_modes, + mst_fbs, + mst_primarys), +"MST modeset failed\n" ); + }else { + data->output->force_reprobe = true; +igt_output_refresh (data->output); + data->pipe =PIPE_A ; +igt_assert_f (fit_modes_in_bw (data), +"Unable to fit modes in bw\n" ); + +igt_output_set_pipe (data->output, data->pipe); + mode =igt_output_get_mode (data->output); +igt_info ("Mode %dx%d@%d on output %s\n" , + mode->hdisplay, mode->vdisplay, + mode->vrefresh, +igt_output_name (data->output));
tests/intel/kms_fallback.c line 432
Quoted 10 lines
tests/intel/kms_fallback.c new file +10
-0+ primary =igt_output_get_plane_type (data->output, +DRM_PLANE_TYPE_PRIMARY ); +igt_create_color_fb (data->drm_fd, + mode->hdisplay, + mode->vdisplay, +DRM_FORMAT_XRGB8888 , +DRM_FORMAT_MOD_LINEAR , +0.0 ,1.0 ,0.0 , &fb); +igt_plane_set_fb (primary, &fb); + }
The above would be better in a separate function and make the MST and non-MST cases more unified. For instance setup_modeset_on_mst_outputs() looks quite similar to the above non-MST setup.[Joshi, Kunal1
PATCH 14/14 HAX: Do not merge
In reply to a message not in the archive--- tests/intel-ci/fast-feedback.testlist | 1 + tests/intel-ci/xe-fast-feedback.testlist | 2 ++ 2 files changed, 3 insertions(+)
tests/intel-ci/fast-feedback.testlist +1 -0
@@ -1,6 +1,7 @@ # Try to load the driver if it's not available yet. igt@i915_module_load@load +igt@kms_fallback@dp-fallback # Keep alphabetically sorted by default igt@core_auth@basic-auth igt@debugfs_test@read_all_entries
tests/intel-ci/xe-fast-feedback.testlist +2 -0
@@ -1,6 +1,8 @@ # Should be the first test igt@xe_module_load@load +igt@kms_fallback@dp-fallback + igt@fbdev@eof igt@fbdev@info igt@fbdev@nullptr
Signature · 1 line
2.34.1
Patchwork
CI✗ CI.xeBAT: failure for series starting with [i-g-t,01/14] lib/igt_kms: add enum for link rate and lane count
In reply to a message not in the archive== Series Details ==
== Series Details ==
Series: series starting with [i-g-t,01/14] lib/igt_kms: add enum for link rate and lane count
URL : https://patchwork.freedesktop.org/series/137761/
State : failure
== Summary ==
CI Bug Log - changes from XEIGT_7990_BAT -> XEIGTPW_11633_BAT
====================================================
Summary
-------
**FAILURE**
Serious unknown changes coming with XEIGTPW_11633_BAT absolutely need to be verified manually.
If you think the reported changes have nothing to do with the changes
introduced in XEIGTPW_11633_BAT, please notify your bug team ([email protected]) to allow them to document this new failure mode, which will reduce false positives in CI.
Participating hosts (9 -> 9)
------------------------------
No changes in participating hosts
Possible new issues
-------------------
Here are the unknown changes that may have been introduced in XEIGTPW_11633_BAT:
### IGT changes ###
#### Possible regressions ####
* igt@kms_fallback@dp-fallback (NEW):
- {bat-bmg-2}: NOTRUN -> [SKIP][1]
[1]: https://intel-gfx-ci.01.org/tree/intel-xe/IGTPW_11633/bat-bmg-2/igt@[email protected]
- bat-adlp-7: NOTRUN -> [SKIP][2]
[2]: https://intel-gfx-ci.01.org/tree/intel-xe/IGTPW_11633/bat-adlp-7/igt@[email protected]
- bat-bmg-1: NOTRUN -> [SKIP][3]
[3]: https://intel-gfx-ci.01.org/tree/intel-xe/IGTPW_11633/bat-bmg-1/igt@[email protected]
- bat-lnl-2: NOTRUN -> [SKIP][4]
[4]: https://intel-gfx-ci.01.org/tree/intel-xe/IGTPW_11633/bat-lnl-2/igt@[email protected]
- bat-adlp-vf: NOTRUN -> [SKIP][5]
[5]: https://intel-gfx-ci.01.org/tree/intel-xe/IGTPW_11633/bat-adlp-vf/igt@[email protected]
- bat-lnl-1: NOTRUN -> [SKIP][6]
[6]: https://intel-gfx-ci.01.org/tree/intel-xe/IGTPW_11633/bat-lnl-1/igt@[email protected]
New tests
---------
New tests have been introduced between XEIGT_7990_BAT and XEIGTPW_11633_BAT:
### New IGT tests (1) ###
* igt@kms_fallback@dp-fallback:
- Statuses : 1 pass(s) 8 skip(s)
- Exec time: [0.0, 11.87] s
Known issues
------------
Here are the changes found in XEIGTPW_11633_BAT that come from known issues:
### IGT changes ###
#### Issues hit ####
* igt@kms_fallback@dp-fallback (NEW):
- bat-atsm-2: NOTRUN -> [SKIP][7] ([Intel XE#1024])
[7]: https://intel-gfx-ci.01.org/tree/intel-xe/IGTPW_11633/bat-atsm-2/igt@[email protected]
- bat-pvc-2: NOTRUN -> [SKIP][8] ([Intel XE#1024])
[8]: https://intel-gfx-ci.01.org/tree/intel-xe/IGTPW_11633/bat-pvc-2/igt@[email protected]
{name}: This element is suppressed. This means it is ignored when computing
the status of the difference (SUCCESS, WARNING, or FAILURE).
[Intel XE#1024]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/1024
Build changes
-------------
* IGT: IGT_7990 -> IGTPW_11633
* Linux: xe-1822-411a047925bb7e169a075a2ddfb63ba96f26a8c8 -> xe-1823-5626fe5d6eeb0949727861375b27d67ee71feaa7
IGTPW_11633: 11633
IGT_7990: 9ca5ff0afa3636478b6ba5a97e5ba440cfb2e55e @ https://gitlab.freedesktop.org/drm/igt-gpu-tools.git
xe-1822-411a047925bb7e169a075a2ddfb63ba96f26a8c8: 411a047925bb7e169a075a2ddfb63ba96f26a8c8 xe-1823-5626fe5d6eeb0949727861375b27d67ee71feaa7: 5626fe5d6eeb0949727861375b27d67ee71feaa7
== Logs ==
For more details see: https://intel-gfx-ci.01.org/tree/intel-xe/IGTPW_11633/index.html
Patchwork
CI✗ Fi.CI.BAT: failure for series starting with [i-g-t,01/14] lib/igt_kms: add enum for link rate and lane count
In reply to a message not in the archive== Series Details ==
== Series Details ==
Series: series starting with [i-g-t,01/14] lib/igt_kms: add enum for link rate and lane count
URL : https://patchwork.freedesktop.org/series/137761/
State : failure
== Summary ==
CI Bug Log - changes from CI_DRM_15288 -> IGTPW_11633
====================================================
Summary
-------
**FAILURE**
Serious unknown changes coming with IGTPW_11633 absolutely need to be verified manually.
If you think the reported changes have nothing to do with the changes
introduced in IGTPW_11633, please notify your bug team ([email protected]) to allow them to document this new failure mode, which will reduce false positives in CI.
External URL: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_11633/index.html
Participating hosts (38 -> 38)
------------------------------
Additional (3): fi-kbl-8809g fi-cfl-8109u fi-elk-e7500
Missing (3): fi-blb-e6850 bat-dg2-11 fi-snb-2520m
Possible new issues
-------------------
Here are the unknown changes that may have been introduced in IGTPW_11633:
### IGT changes ###
#### Possible regressions ####
* igt@kms_fallback@dp-fallback (NEW):
- fi-rkl-11600: NOTRUN -> [SKIP][1]
[1]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_11633/fi-rkl-11600/igt@[email protected]
- fi-tgl-1115g4: NOTRUN -> [SKIP][2]
[2]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_11633/fi-tgl-1115g4/igt@[email protected]
- bat-arls-2: NOTRUN -> [SKIP][3]
[3]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_11633/bat-arls-2/igt@[email protected]
- bat-mtlp-8: NOTRUN -> [SKIP][4]
[4]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_11633/bat-mtlp-8/igt@[email protected]
- bat-jsl-1: NOTRUN -> [SKIP][5]
[5]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_11633/bat-jsl-1/igt@[email protected]
- bat-arls-1: NOTRUN -> [SKIP][6]
[6]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_11633/bat-arls-1/igt@[email protected]
- bat-arlh-2: NOTRUN -> [SKIP][7]
[7]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_11633/bat-arlh-2/igt@[email protected]
- bat-dg1-7: NOTRUN -> [SKIP][8]
[8]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_11633/bat-dg1-7/igt@[email protected]
- bat-twl-2: NOTRUN -> [SKIP][9]
[9]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_11633/bat-twl-2/igt@[email protected]
- bat-rpls-4: NOTRUN -> [SKIP][10]
[10]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_11633/bat-rpls-4/igt@[email protected]
- bat-twl-1: NOTRUN -> [SKIP][11]
[11]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_11633/bat-twl-1/igt@[email protected]
- bat-dg2-14: NOTRUN -> [SKIP][12]
[12]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_11633/bat-dg2-14/igt@[email protected]
- bat-rplp-1: NOTRUN -> [SKIP][13]
[13]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_11633/bat-rplp-1/igt@[email protected]
New tests
---------
New tests have been introduced between CI_DRM_15288 and IGTPW_11633:
### New IGT tests (1) ###
* igt@kms_fallback@dp-fallback:
- Statuses : 8 pass(s) 29 skip(s)
- Exec time: [0.0, 16.34] s
Known issues
------------
Here are the changes found in IGTPW_11633 that come from known issues:
### IGT changes ###
#### Issues hit ####
* igt@gem_huc_copy@huc-copy:
- fi-cfl-8109u: NOTRUN -> [SKIP][14] ([i915#2190])
[14]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_11633/fi-cfl-8109u/igt@[email protected]
- fi-kbl-8809g: NOTRUN -> [SKIP][15] ([i915#2190])
[15]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_11633/fi-kbl-8809g/igt@[email protected]
* igt@gem_lmem_swapping@basic:
- fi-kbl-8809g: NOTRUN -> [SKIP][16] ([i915#4613]) +3 other tests skip
[16]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_11633/fi-kbl-8809g/igt@[email protected]
* igt@gem_lmem_swapping@verify-random:
- fi-cfl-8109u: NOTRUN -> [SKIP][17] ([i915#4613]) +3 other tests skip
[17]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_11633/fi-cfl-8109u/igt@[email protected]
* igt@i915_selftest@live@hangcheck:
- bat-arls-2: [PASS][18] -> [DMESG-WARN][19] ([i915#11349])
[18]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_15288/bat-arls-2/igt@i915_selftest@[email protected]
[19]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_11633/bat-arls-2/igt@i915_selftest@[email protected]
* igt@kms_fallback@dp-fallback (NEW):
- fi-cfl-guc: NOTRUN -> [SKIP][20]
[20]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_11633/fi-cfl-guc/igt@[email protected]
- bat-mtlp-6: NOTRUN -> [SKIP][21] ([i915#9792])
[21]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_11633/bat-mtlp-6/igt@[email protected]
- bat-dg2-9: NOTRUN -> [SKIP][22] ([i915#9197])
[22]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_11633/bat-dg2-9/igt@[email protected]
- fi-kbl-x1275: NOTRUN -> [SKIP][23]
[23]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_11633/fi-kbl-x1275/igt@[email protected]
- bat-adlp-11: NOTRUN -> [SKIP][24] ([i915#10470])
[24]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_11633/bat-adlp-11/igt@[email protected]
- fi-ivb-3770: NOTRUN -> [SKIP][25]
[25]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_11633/fi-ivb-3770/igt@[email protected]
- fi-kbl-guc: NOTRUN -> [SKIP][26]
[26]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_11633/fi-kbl-guc/igt@[email protected]
- fi-ilk-650: NOTRUN -> [SKIP][27]
[27]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_11633/fi-ilk-650/igt@[email protected]
- fi-bsw-n3050: NOTRUN -> [SKIP][28]
[28]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_11633/fi-bsw-n3050/igt@[email protected]
- fi-pnv-d510: NOTRUN -> [SKIP][29]
[29]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_11633/fi-pnv-d510/igt@[email protected]
- fi-glk-j4005: NOTRUN -> [SKIP][30]
[30]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_11633/fi-glk-j4005/igt@[email protected]
- fi-cfl-8700k: NOTRUN -> [SKIP][31]
[31]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_11633/fi-cfl-8700k/igt@[email protected]
- bat-kbl-2: NOTRUN -> [SKIP][32]
[32]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_11633/bat-kbl-2/igt@[email protected]
- bat-adlm-1: NOTRUN -> [SKIP][33] ([i915#9900])
[33]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_11633/bat-adlm-1/igt@[email protected]
* igt@kms_force_connector_basic@force-load-detect:
- fi-kbl-8809g: NOTRUN -> [SKIP][34] +31 other tests skip
[34]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_11633/fi-kbl-8809g/igt@[email protected]
* igt@kms_pm_backlight@basic-brightness:
- fi-cfl-8109u: NOTRUN -> [SKIP][35] +11 other tests skip
[35]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_11633/fi-cfl-8109u/igt@[email protected]
* igt@kms_pm_rpm@basic-pci-d3-state:
- fi-elk-e7500: NOTRUN -> [SKIP][36] +25 other tests skip
[36]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_11633/fi-elk-e7500/igt@[email protected]
[i915#10470]: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/10470
[i915#11349]: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/11349
[i915#2190]: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/2190
[i915#4613]: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/4613
[i915#9197]: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/9197
[i915#9792]: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/9792
[i915#9900]: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/9900
Build changes
-------------
* CI: CI-20190529 -> None
* IGT: IGT_7990 -> IGTPW_11633
CI-20190529: 20190529
CI_DRM_15288: 5626fe5d6eeb0949727861375b27d67ee71feaa7 @ git://anongit.freedesktop.org/gfx-ci/linux
IGTPW_11633: 11633
IGT_7990: 9ca5ff0afa3636478b6ba5a97e5ba440cfb2e55e @ https://gitlab.freedesktop.org/drm/igt-gpu-tools.git
== Logs ==
For more details see: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_11633/index.html
Patchwork
CI✗ CI.xeFULL: failure for series starting with [i-g-t,01/14] lib/igt_kms: add enum for link rate and lane count
In reply to a message not in the archive== Series Details ==
== Series Details ==
Series: series starting with [i-g-t,01/14] lib/igt_kms: add enum for link rate and lane count
URL : https://patchwork.freedesktop.org/series/137761/
State : failure
== Summary ==
CI Bug Log - changes from XEIGT_7990_full -> XEIGTPW_11633_full
====================================================
Summary
-------
**FAILURE**
Serious unknown changes coming with XEIGTPW_11633_full absolutely need to be verified manually.
If you think the reported changes have nothing to do with the changes
introduced in XEIGTPW_11633_full, please notify your bug team ([email protected]) to allow them to document this new failure mode, which will reduce false positives in CI.
Participating hosts (4 -> 4)
------------------------------
No changes in participating hosts
Possible new issues
-------------------
Here are the unknown changes that may have been introduced in XEIGTPW_11633_full:
### IGT changes ###
#### Possible regressions ####
* igt@kms_fallback@dp-fallback (NEW):
- shard-lnl: NOTRUN -> [SKIP][1]
[1]: https://intel-gfx-ci.01.org/tree/intel-xe/IGTPW_11633/shard-lnl-6/igt@[email protected]
* igt@xe_drm_fdinfo@drm-most-busy-idle-check-all:
- shard-lnl: [PASS][2] -> [FAIL][3]
[2]: https://intel-gfx-ci.01.org/tree/intel-xe/IGT_7990/shard-lnl-6/igt@[email protected]
[3]: https://intel-gfx-ci.01.org/tree/intel-xe/IGTPW_11633/shard-lnl-4/igt@[email protected]
- shard-dg2-set2: [PASS][4] -> [FAIL][5]
[4]: https://intel-gfx-ci.01.org/tree/intel-xe/IGT_7990/shard-dg2-434/igt@[email protected]
[5]: https://intel-gfx-ci.01.org/tree/intel-xe/IGTPW_11633/shard-dg2-432/igt@[email protected]
#### Warnings ####
* igt@kms_ccs@bad-rotation-90-4-tiled-lnl-ccs:
- shard-dg2-set2: [SKIP][6] ([Intel XE#1201]) -> [SKIP][7] +2 other tests skip
[6]: https://intel-gfx-ci.01.org/tree/intel-xe/IGT_7990/shard-dg2-436/igt@[email protected]
[7]: https://intel-gfx-ci.01.org/tree/intel-xe/IGTPW_11633/shard-dg2-432/igt@[email protected]
#### Suppressed ####
The following results come from untrusted machines, tests, or statuses. They do not affect the overall result.
* igt@kms_async_flips@crc@pipe-a-dp-2:
- {shard-bmg}: [FAIL][8] ([Intel XE#1656]) -> [DMESG-FAIL][9]
[8]: https://intel-gfx-ci.01.org/tree/intel-xe/IGT_7990/shard-bmg-1/igt@kms_async_flips@[email protected]
[9]: https://intel-gfx-ci.01.org/tree/intel-xe/IGTPW_11633/shard-bmg-7/igt@kms_async_flips@[email protected]
* igt@kms_flip@2x-flip-vs-absolute-wf_vblank:
- {shard-bmg}: [PASS][10] -> [INCOMPLETE][11] +1 other test incomplete
[10]: https://intel-gfx-ci.01.org/tree/intel-xe/IGT_7990/shard-bmg-1/igt@kms_flip@2x-flip-vs-absolute-wf_vblank.html
[11]: https://intel-gfx-ci.01.org/tree/intel-xe/IGTPW_11633/shard-bmg-7/igt@kms_flip@2x-flip-vs-absolute-wf_vblank.html
New tests
---------
New tests have been introduced between XEIGT_7990_full and XEIGTPW_11633_full:
### New IGT tests (1) ###
* igt@kms_fallback@dp-fallback:
- Statuses : 2 pass(s) 1 skip(s)
- Exec time: [0.0, 11.46] s
Known issues
------------
Here are the changes found in XEIGTPW_11633_full that come from known issues:
### IGT changes ###
#### Issues hit ####
* igt@kms_addfb_basic@addfb25-y-tiled-small-legacy:
- shard-lnl: NOTRUN -> [SKIP][12] ([Intel XE#1466])
[12]: https://intel-gfx-ci.01.org/tree/intel-xe/IGTPW_11633/shard-lnl-4/igt@[email protected]
* igt@kms_async_flips@async-flip-with-page-flip-events@pipe-a-edp-1-linear:
- shard-lnl: [PASS][13] -> [FAIL][14] ([Intel XE#911]) +3 other tests fail
[13]: https://intel-gfx-ci.01.org/tree/intel-xe/IGT_7990/shard-lnl-8/igt@kms_async_flips@[email protected]
[14]: https://intel-gfx-ci.01.org/tree/intel-xe/IGTPW_11633/shard-lnl-6/igt@kms_async_flips@[email protected]
* igt@kms_atomic_transition@plane-all-modeset-transition-internal-panels@pipe-a-edp-1:
- shard-lnl: [PASS][15] -> [FAIL][16] ([Intel XE#1426]) +1 other test fail
[15]: https://intel-gfx-ci.01.org/tree/intel-xe/IGT_7990/shard-lnl-4/igt@kms_atomic_transition@[email protected]
[16]: https://intel-gfx-ci.01.org/tree/intel-xe/IGTPW_11633/shard-lnl-1/igt@kms_atomic_transition@[email protected]
* igt@kms_big_fb@4-tiled-64bpp-rotate-180:
- shard-lnl: [PASS][17] -> [FAIL][18] ([Intel XE#1659])
[17]: https://intel-gfx-ci.01.org/tree/intel-xe/IGT_7990/shard-lnl-8/igt@[email protected]
[18]: https://intel-gfx-ci.01.org/tree/intel-xe/IGTPW_11633/shard-lnl-5/igt@[email protected]
* igt@kms_big_fb@linear-64bpp-rotate-0:
- shard-lnl: NOTRUN -> [DMESG-WARN][19] ([Intel XE#1725])
[19]: https://intel-gfx-ci.01.org/tree/intel-xe/IGTPW_11633/shard-lnl-8/igt@[email protected]
* igt@kms_big_fb@linear-64bpp-rotate-270:
- shard-dg2-set2: NOTRUN -> [SKIP][20] ([Intel XE#1201] / [Intel XE#316])
[20]: https://intel-gfx-ci.01.org/tree/intel-xe/IGTPW_11633/shard-dg2-435/igt@[email protected]
* igt@kms_big_fb@x-tiled-64bpp-rotate-90:
- shard-lnl: NOTRUN -> [SKIP][21] ([Intel XE#1407])
[21]: https://intel-gfx-ci.01.org/tree/intel-xe/IGTPW_11633/shard-lnl-4/igt@[email protected]
* igt@kms_big_fb@yf-tiled-max-hw-stride-64bpp-rotate-0-async-flip:
- shard-lnl: NOTRUN -> [SKIP][22] ([Intel XE#1124]) +6 other tests skip
[22]: https://intel-gfx-ci.01.org/tree/intel-xe/IGTPW_11633/shard-lnl-1/igt@[email protected]
* igt@kms_big_joiner@invalid-modeset:
- shard-lnl: NOTRUN -> [SKIP][23] ([Intel XE#346])
[23]: https://intel-gfx-ci.01.org/tree/intel-xe/IGTPW_11633/shard-lnl-6/igt@[email protected]
* igt@kms_bw@linear-tiling-2-displays-2160x1440p:
- shard-lnl: NOTRUN -> [SKIP][24] ([Intel XE#367]) +1 other test skip
[24]: https://intel-gfx-ci.01.org/tree/intel-xe/IGTPW_11633/shard-lnl-4/igt@[email protected]
* igt@kms_ccs@bad-aux-stride-y-tiled-gen12-mc-ccs:
- shard-dg2-set2: NOTRUN -> [SKIP][25] ([Intel XE#1201] / [Intel XE#455] / [Intel XE#787]) +5 other tests skip
[25]: https://intel-gfx-ci.01.org/tree/intel-xe/IGTPW_11633/shard-dg2-436/igt@[email protected]
* igt@kms_ccs@bad-aux-stride-y-tiled-gen12-mc-ccs@pipe-c-hdmi-a-6:
- shard-dg2-set2: NOTRUN -> [SKIP][26] ([Intel XE#1201] / [Intel XE#787]) +20 other tests skip
[26]: https://intel-gfx-ci.01.org/tree/intel-xe/IGTPW_11633/shard-dg2-436/igt@kms_ccs@[email protected]
* igt@kms_ccs@random-ccs-data-4-tiled-mtl-rc-ccs:
- shard-lnl: NOTRUN -> [SKIP][27] ([Intel XE#1399]) +9 other tests skip
[27]: https://intel-gfx-ci.01.org/tree/intel-xe/IGTPW_11633/shard-lnl-1/igt@[email protected]
* igt@kms_cdclk@mode-transition-all-outputs:
- shard-lnl: NOTRUN -> [SKIP][28] ([Intel XE#314])
[28]: https://intel-gfx-ci.01.org/tree/intel-xe/IGTPW_11633/shard-lnl-2/igt@[email protected]
* igt@kms_chamelium_hpd@hdmi-hpd:
- shard-dg2-set2: NOTRUN -> [SKIP][29] ([Intel XE#1201] / [Intel XE#373]) +1 other test skip
[29]: https://intel-gfx-ci.01.org/tree/intel-xe/IGTPW_11633/shard-dg2-436/igt@[email protected]
* igt@kms_chamelium_hpd@hdmi-hpd-storm:
- shard-lnl: NOTRUN -> [SKIP][30] ([Intel XE#373]) +4 other tests skip
[30]: https://intel-gfx-ci.01.org/tree/intel-xe/IGTPW_11633/shard-lnl-3/igt@[email protected]
* igt@kms_cursor_crc@cursor-onscreen-32x10:
- shard-lnl: NOTRUN -> [SKIP][31] ([Intel XE#1424])
[31]: https://intel-gfx-ci.01.org/tree/intel-xe/IGTPW_11633/shard-lnl-5/igt@[email protected]
* igt@kms_cursor_crc@cursor-random-32x10:
- shard-dg2-set2: NOTRUN -> [SKIP][32] ([Intel XE#1201] / [Intel XE#455])
[32]: https://intel-gfx-ci.01.org/tree/intel-xe/IGTPW_11633/shard-dg2-433/igt@[email protected]
* igt@kms_cursor_legacy@cursora-vs-flipb-varying-size:
- shard-lnl: NOTRUN -> [SKIP][33] ([Intel XE#309])
[33]: https://intel-gfx-ci.01.org/tree/intel-xe/IGTPW_11633/shard-lnl-5/igt@[email protected]
* igt@kms_feature_discovery@chamelium:
- shard-lnl: NOTRUN -> [SKIP][34] ([Intel XE#701])
[34]: https://intel-gfx-ci.01.org/tree/intel-xe/IGTPW_11633/shard-lnl-3/igt@[email protected]
* igt@kms_flip@2x-plain-flip-fb-recreate-interruptible:
- shard-lnl: NOTRUN -> [SKIP][35] ([Intel XE#1421]) +3 other tests skip
[35]: https://intel-gfx-ci.01.org/tree/intel-xe/IGTPW_11633/shard-lnl-2/igt@[email protected]
* igt@kms_flip_scaled_crc@flip-32bpp-4tile-to-64bpp-4tile-downscaling:
- shard-lnl: NOTRUN -> [SKIP][36] ([Intel XE#1397] / [Intel XE#1745])
[36]: https://intel-gfx-ci.01.org/tree/intel-xe/IGTPW_11633/shard-lnl-3/igt@kms_flip_scaled_crc@flip-32bpp-4tile-to-64bpp-4tile-downscaling.html
* igt@kms_flip_scaled_crc@flip-32bpp-4tile-to-64bpp-4tile-downscaling@pipe-a-default-mode:
- shard-lnl: NOTRUN -> [SKIP][37] ([Intel XE#1397])
[37]: https://intel-gfx-ci.01.org/tree/intel-xe/IGTPW_11633/shard-lnl-3/igt@kms_flip_scaled_crc@flip-32bpp-4tile-to-64bpp-4tile-downscaling@pipe-a-default-mode.html
* igt@kms_flip_scaled_crc@flip-32bpp-ytile-to-64bpp-ytile-downscaling:
- shard-lnl: NOTRUN -> [SKIP][38] ([Intel XE#1401] / [Intel XE#1745]) +1 other test skip
[38]: https://intel-gfx-ci.01.org/tree/intel-xe/IGTPW_11633/shard-lnl-7/igt@kms_flip_scaled_crc@flip-32bpp-ytile-to-64bpp-ytile-downscaling.html
* igt@kms_flip_scaled_crc@flip-32bpp-ytile-to-64bpp-ytile-downscaling@pipe-a-default-mode:
- shard-lnl: NOTRUN -> [SKIP][39] ([Intel XE#1401]) +1 other test skip
[39]: https://intel-gfx-ci.01.org/tree/intel-xe/IGTPW_11633/shard-lnl-7/igt@kms_flip_scaled_crc@flip-32bpp-ytile-to-64bpp-ytile-downscaling@pipe-a-default-mode.html
* igt@kms_frontbuffer_tracking@drrs-suspend:
- shard-dg2-set2: NOTRUN -> [SKIP][40] ([Intel XE#1201] / [Intel XE#651]) +3 other tests skip
[40]: https://intel-gfx-ci.01.org/tree/intel-xe/IGTPW_11633/shard-dg2-435/igt@[email protected]
* igt@kms_frontbuffer_tracking@fbcdrrs-rgb101010-draw-mmap-wc:
- shard-lnl: NOTRUN -> [SKIP][41] ([Intel XE#651]) +10 other tests skip
[41]: https://intel-gfx-ci.01.org/tree/intel-xe/IGTPW_11633/shard-lnl-1/igt@[email protected]
* igt@kms_frontbuffer_tracking@fbcpsr-1p-primscrn-indfb-pgflip-blt:
- shard-dg2-set2: NOTRUN -> [SKIP][42] ([Intel XE#1201] / [Intel XE#653]) +1 other test skip
[42]: https://intel-gfx-ci.01.org/tree/intel-xe/IGTPW_11633/shard-dg2-434/igt@kms_frontbuffer_tracking@fbcpsr-1p-primscrn-indfb-pgflip-blt.html
* igt@kms_frontbuffer_tracking@psr-2p-scndscrn-pri-indfb-draw-render:
- shard-lnl: NOTRUN -> [SKIP][43] ([Intel XE#656]) +26 other tests skip
[43]: https://intel-gfx-ci.01.org/tree/intel-xe/IGTPW_11633/shard-lnl-2/igt@kms_frontbuffer_tracking@psr-2p-scndscrn-pri-indfb-draw-render.html
* igt@kms_getfb@getfb-reject-ccs:
- shard-lnl: NOTRUN -> [SKIP][44] ([Intel XE#605])
[44]: https://intel-gfx-ci.01.org/tree/intel-xe/IGTPW_11633/shard-lnl-6/igt@[email protected]
* igt@kms_plane@plane-position-hole-dpms@pipe-a-plane-1:
- shard-lnl: [PASS][45] -> [DMESG-WARN][46] ([Intel XE#324]) +2 other tests dmesg-warn
[45]: https://intel-gfx-ci.01.org/tree/intel-xe/IGT_7990/shard-lnl-1/igt@kms_plane@[email protected]
[46]: https://intel-gfx-ci.01.org/tree/intel-xe/IGTPW_11633/shard-lnl-4/igt@kms_plane@[email protected]
* igt@kms_plane_scaling@intel-max-src-size@pipe-a-hdmi-a-6:
- shard-dg2-set2: [PASS][47] -> [FAIL][48] ([Intel XE#361]) +2 other tests fail
[47]: https://intel-gfx-ci.01.org/tree/intel-xe/IGT_7990/shard-dg2-435/igt@kms_plane_scaling@[email protected]
[48]: https://intel-gfx-ci.01.org/tree/intel-xe/IGTPW_11633/shard-dg2-436/igt@kms_plane_scaling@[email protected]
* igt@kms_plane_scaling@plane-downscale-factor-0-5-with-rotation@pipe-b-edp-1:
- shard-lnl: NOTRUN -> [SKIP][49] ([Intel XE#498]) +3 other tests skip
[49]: https://intel-gfx-ci.01.org/tree/intel-xe/IGTPW_11633/shard-lnl-6/igt@kms_plane_scaling@[email protected]
* igt@kms_plane_scaling@planes-upscale-20x20-downscale-factor-0-5@pipe-b-edp-1:
- shard-lnl: NOTRUN -> [SKIP][50] ([Intel XE#2318]) +3 other tests skip
[50]: https://intel-gfx-ci.01.org/tree/intel-xe/IGTPW_11633/shard-lnl-1/igt@kms_plane_scaling@[email protected]
* igt@kms_pm_dc@dc3co-vpb-simulation:
- shard-lnl: NOTRUN -> [SKIP][51] ([Intel XE#736])
[51]: https://intel-gfx-ci.01.org/tree/intel-xe/IGTPW_11633/shard-lnl-5/igt@[email protected]
* igt@kms_pm_dc@dc5-psr:
- shard-lnl: [PASS][52] -> [FAIL][53] ([Intel XE#718])
[52]: https://intel-gfx-ci.01.org/tree/intel-xe/IGT_7990/shard-lnl-7/igt@[email protected]
[53]: https://intel-gfx-ci.01.org/tree/intel-xe/IGTPW_11633/shard-lnl-8/igt@[email protected]
* igt@kms_pm_rpm@modeset-non-lpsp-stress:
- shard-lnl: NOTRUN -> [SKIP][54] ([Intel XE#1439])
[54]: https://intel-gfx-ci.01.org/tree/intel-xe/IGTPW_11633/shard-lnl-5/igt@[email protected]
* igt@kms_psr2_sf@overlay-primary-update-sf-dmg-area:
- shard-dg2-set2: NOTRUN -> [SKIP][55] ([Intel XE#1489])
[55]: https://intel-gfx-ci.01.org/tree/intel-xe/IGTPW_11633/shard-dg2-432/igt@[email protected]
* igt@kms_psr2_su@page_flip-nv12:
- shard-dg2-set2: NOTRUN -> [SKIP][56] ([Intel XE#1122] / [Intel XE#1201])
[56]: https://intel-gfx-ci.01.org/tree/intel-xe/IGTPW_11633/shard-dg2-434/igt@kms_psr2_su@page_flip-nv12.html
* igt@kms_psr2_su@page_flip-xrgb8888:
- shard-lnl: NOTRUN -> [SKIP][57] ([Intel XE#1128])
[57]: https://intel-gfx-ci.01.org/tree/intel-xe/IGTPW_11633/shard-lnl-6/igt@kms_psr2_su@page_flip-xrgb8888.html
* igt@kms_psr@pr-sprite-plane-move:
- shard-lnl: NOTRUN -> [SKIP][58] ([Intel XE#1406]) +2 other tests skip
[58]: https://intel-gfx-ci.01.org/tree/intel-xe/IGTPW_11633/shard-lnl-8/igt@[email protected]
* igt@kms_psr@psr-cursor-blt:
- shard-dg2-set2: NOTRUN -> [SKIP][59] ([Intel XE#1201] / [Intel XE#929])
[59]: https://intel-gfx-ci.01.org/tree/intel-xe/IGTPW_11633/shard-dg2-434/igt@[email protected]
* igt@kms_rotation_crc@sprite-rotation-90-pos-100-0:
- shard-lnl: NOTRUN -> [SKIP][60] ([Intel XE#1437])
[60]: https://intel-gfx-ci.01.org/tree/intel-xe/IGTPW_11633/shard-lnl-2/igt@[email protected]
* igt@kms_scaling_modes@scaling-mode-none:
- shard-lnl: NOTRUN -> [SKIP][61] ([Intel XE#374] / [Intel XE#599])
[61]: https://intel-gfx-ci.01.org/tree/intel-xe/IGTPW_11633/shard-lnl-8/igt@[email protected]
* igt@kms_scaling_modes@scaling-mode-none@pipe-a-edp-1:
- shard-lnl: NOTRUN -> [SKIP][62] ([Intel XE#374]) +2 other tests skip
[62]: https://intel-gfx-ci.01.org/tree/intel-xe/IGTPW_11633/shard-lnl-8/igt@kms_scaling_modes@[email protected]
* igt@kms_universal_plane@cursor-fb-leak@pipe-c-hdmi-a-6:
- shard-dg2-set2: [PASS][63] -> [FAIL][64] ([Intel XE#899])
[63]: https://intel-gfx-ci.01.org/tree/intel-xe/IGT_7990/shard-dg2-433/igt@kms_universal_plane@[email protected]
[64]: https://intel-gfx-ci.01.org/tree/intel-xe/IGTPW_11633/shard-dg2-463/igt@kms_universal_plane@[email protected]
* igt@kms_vrr@flip-basic:
- shard-lnl: NOTRUN -> [FAIL][65] ([Intel XE#2443]) +1 other test fail
[65]: https://intel-gfx-ci.01.org/tree/intel-xe/IGTPW_11633/shard-lnl-3/igt@[email protected]
* igt@kms_vrr@negative-basic:
- shard-lnl: NOTRUN -> [SKIP][66] ([Intel XE#1499] / [Intel XE#599])
[66]: https://intel-gfx-ci.01.org/tree/intel-xe/IGTPW_11633/shard-lnl-6/igt@[email protected]
* igt@sriov_basic@enable-vfs-autoprobe-off:
- shard-dg2-set2: NOTRUN -> [SKIP][67] ([Intel XE#1091] / [Intel XE#1201])
[67]: https://intel-gfx-ci.01.org/tree/intel-xe/IGTPW_11633/shard-dg2-434/igt@[email protected]
* igt@xe_evict@evict-beng-threads-large-multi-vm:
- shard-lnl: NOTRUN -> [SKIP][68] ([Intel XE#688]) +5 other tests skip
[68]: https://intel-gfx-ci.01.org/tree/intel-xe/IGTPW_11633/shard-lnl-3/igt@[email protected]
* igt@xe_exec_basic@multigpu-many-execqueues-many-vm-bindexecqueue-userptr-rebind:
- shard-lnl: NOTRUN -> [SKIP][69] ([Intel XE#1392]) +4 other tests skip
[69]: https://intel-gfx-ci.01.org/tree/intel-xe/IGTPW_11633/shard-lnl-3/igt@xe_exec_basic@multigpu-many-execqueues-many-vm-bindexecqueue-userptr-rebind.html
* igt@xe_exec_fault_mode@many-execqueues-invalid-userptr-fault:
- shard-dg2-set2: NOTRUN -> [SKIP][70] ([Intel XE#1201] / [Intel XE#288]) +1 other test skip
[70]: https://intel-gfx-ci.01.org/tree/intel-xe/IGTPW_11633/shard-dg2-435/igt@[email protected]
* igt@xe_live_ktest@xe_migrate@xe_validate_ccs_kunit:
- shard-lnl: NOTRUN -> [SKIP][71] ([Intel XE#2229])
[71]: https://intel-gfx-ci.01.org/tree/intel-xe/IGTPW_11633/shard-lnl-6/igt@xe_live_ktest@xe_migrate@xe_validate_ccs_kunit.html
* igt@xe_oa@closed-fd-and-unmapped-access:
- shard-dg2-set2: NOTRUN -> [SKIP][72] ([Intel XE#1201] / [Intel XE#2541]) +1 other test skip
[72]: https://intel-gfx-ci.01.org/tree/intel-xe/IGTPW_11633/shard-dg2-463/igt@[email protected]
* igt@xe_pat@pat-index-xelp:
- shard-lnl: NOTRUN -> [SKIP][73] ([Intel XE#977])
[73]: https://intel-gfx-ci.01.org/tree/intel-xe/IGTPW_11633/shard-lnl-4/igt@[email protected]
* igt@xe_pm@d3hot-mmap-vram:
- shard-lnl: NOTRUN -> [SKIP][74] ([Intel XE#1948])
[74]: https://intel-gfx-ci.01.org/tree/intel-xe/IGTPW_11633/shard-lnl-2/igt@[email protected]
* igt@xe_pm@s3-d3hot-basic-exec:
- shard-dg2-set2: [PASS][75] -> [DMESG-WARN][76] ([Intel XE#1551] / [Intel XE#569])
[75]: https://intel-gfx-ci.01.org/tree/intel-xe/IGT_7990/shard-dg2-432/igt@[email protected]
[76]: https://intel-gfx-ci.01.org/tree/intel-xe/IGTPW_11633/shard-dg2-436/igt@[email protected]
* igt@xe_pm@s4-basic:
- shard-dg2-set2: [PASS][77] -> [DMESG-WARN][78] ([Intel XE#2019]) +1 other test dmesg-warn
[77]: https://intel-gfx-ci.01.org/tree/intel-xe/IGT_7990/shard-dg2-466/igt@[email protected]
[78]: https://intel-gfx-ci.01.org/tree/intel-xe/IGTPW_11633/shard-dg2-434/igt@[email protected]
* igt@xe_pm@s4-mocs:
- shard-dg2-set2: [PASS][79] -> [DMESG-WARN][80] ([Intel XE#2280])
[79]: https://intel-gfx-ci.01.org/tree/intel-xe/IGT_7990/shard-dg2-434/igt@[email protected]
[80]: https://intel-gfx-ci.01.org/tree/intel-xe/IGTPW_11633/shard-dg2-466/igt@[email protected]
* igt@xe_query@multigpu-query-invalid-size:
- shard-lnl: NOTRUN -> [SKIP][81] ([Intel XE#944]) +1 other test skip
[81]: https://intel-gfx-ci.01.org/tree/intel-xe/IGTPW_11633/shard-lnl-4/igt@[email protected]
#### Possible fixes ####
* igt@kms_atomic_transition@plane-all-modeset-transition@pipe-a-hdmi-a-6:
- shard-dg2-set2: [FAIL][82] ([Intel XE#1426]) -> [PASS][83] +1 other test pass
[82]: https://intel-gfx-ci.01.org/tree/intel-xe/IGT_7990/shard-dg2-436/igt@kms_atomic_transition@[email protected]
[83]: https://intel-gfx-ci.01.org/tree/intel-xe/IGTPW_11633/shard-dg2-433/igt@kms_atomic_transition@[email protected]
* igt@kms_big_fb@4-tiled-max-hw-stride-64bpp-rotate-0-hflip:
- shard-lnl: [FAIL][84] ([Intel XE#1659]) -> [PASS][85]
[84]: https://intel-gfx-ci.01.org/tree/intel-xe/IGT_7990/shard-lnl-5/igt@[email protected]
[85]: https://intel-gfx-ci.01.org/tree/intel-xe/IGTPW_11633/shard-lnl-4/igt@[email protected]
* igt@kms_ccs@crc-sprite-planes-basic-4-tiled-bmg-ccs:
- {shard-bmg}: [FAIL][86] ([Intel XE#2436]) -> [PASS][87] +1 other test pass
[86]: https://intel-gfx-ci.01.org/tree/intel-xe/IGT_7990/shard-bmg-3/igt@[email protected]
[87]: https://intel-gfx-ci.01.org/tree/intel-xe/IGTPW_11633/shard-bmg-3/igt@[email protected]
* igt@kms_ccs@crc-sprite-planes-basic-4-tiled-bmg-ccs@pipe-c-dp-2:
- {shard-bmg}: [FAIL][88] -> [PASS][89]
[88]: https://intel-gfx-ci.01.org/tree/intel-xe/IGT_7990/shard-bmg-3/igt@kms_ccs@[email protected]
[89]: https://intel-gfx-ci.01.org/tree/intel-xe/IGTPW_11633/shard-bmg-3/igt@kms_ccs@[email protected]
* igt@kms_cursor_crc@cursor-suspend:
- shard-dg2-set2: [DMESG-WARN][90] ([Intel XE#1551]) -> [PASS][91] +1 other test pass
[90]: https://intel-gfx-ci.01.org/tree/intel-xe/IGT_7990/shard-dg2-435/igt@[email protected]
[91]: https://intel-gfx-ci.01.org/tree/intel-xe/IGTPW_11633/shard-dg2-436/igt@[email protected]
* igt@kms_flip@2x-flip-vs-panning-interruptible@cd-dp2-hdmi-a3:
- {shard-bmg}: [DMESG-WARN][92] ([Intel XE#877]) -> [PASS][93] +6 other tests pass
[92]: https://intel-gfx-ci.01.org/tree/intel-xe/IGT_7990/shard-bmg-6/igt@kms_flip@[email protected]
[93]: https://intel-gfx-ci.01.org/tree/intel-xe/IGTPW_11633/shard-bmg-4/igt@kms_flip@[email protected]
* igt@kms_flip@flip-vs-absolute-wf_vblank:
- shard-lnl: [FAIL][94] ([Intel XE#886]) -> [PASS][95] +2 other tests pass
[94]: https://intel-gfx-ci.01.org/tree/intel-xe/IGT_7990/shard-lnl-3/igt@kms_flip@flip-vs-absolute-wf_vblank.html
[95]: https://intel-gfx-ci.01.org/tree/intel-xe/IGTPW_11633/shard-lnl-8/igt@kms_flip@flip-vs-absolute-wf_vblank.html
* igt@kms_flip@flip-vs-absolute-wf_vblank@c-hdmi-a3:
- {shard-bmg}: [INCOMPLETE][96] -> [PASS][97] +2 other tests pass
[96]: https://intel-gfx-ci.01.org/tree/intel-xe/IGT_7990/shard-bmg-5/igt@kms_flip@[email protected]
[97]: https://intel-gfx-ci.01.org/tree/intel-xe/IGTPW_11633/shard-bmg-8/igt@kms_flip@[email protected]
* igt@kms_hdr@invalid-hdr:
- {shard-bmg}: [SKIP][98] ([Intel XE#1503]) -> [PASS][99]
[98]: https://intel-gfx-ci.01.org/tree/intel-xe/IGT_7990/shard-bmg-1/igt@[email protected]
[99]: https://intel-gfx-ci.01.org/tree/intel-xe/IGTPW_11633/shard-bmg-3/igt@[email protected]
* igt@kms_plane_cursor@overlay:
- shard-dg2-set2: [INCOMPLETE][100] ([Intel XE#1195]) -> [PASS][101] +2 other tests pass
[100]: https://intel-gfx-ci.01.org/tree/intel-xe/IGT_7990/shard-dg2-435/igt@[email protected]
[101]: https://intel-gfx-ci.01.org/tree/intel-xe/IGTPW_11633/shard-dg2-432/igt@[email protected]
* igt@kms_psr@fbc-psr-suspend:
- shard-lnl: [INCOMPLETE][102] -> [PASS][103]
[102]: https://intel-gfx-ci.01.org/tree/intel-xe/IGT_7990/shard-lnl-4/igt@[email protected]
[103]: https://intel-gfx-ci.01.org/tree/intel-xe/IGTPW_11633/shard-lnl-2/igt@[email protected]
* igt@kms_psr@fbc-psr-suspend@edp-1:
- shard-lnl: [INCOMPLETE][104] ([Intel XE#2497]) -> [PASS][105]
[104]: https://intel-gfx-ci.01.org/tree/intel-xe/IGT_7990/shard-lnl-4/igt@kms_psr@[email protected]
[105]: https://intel-gfx-ci.01.org/tree/intel-xe/IGTPW_11633/shard-lnl-2/igt@kms_psr@[email protected]
* igt@kms_psr@psr2-cursor-plane-move@edp-1:
- shard-lnl: [FAIL][106] ([Intel XE#1649]) -> [PASS][107] +1 other test pass
[106]: https://intel-gfx-ci.01.org/tree/intel-xe/IGT_7990/shard-lnl-5/igt@kms_psr@[email protected]
[107]: https://intel-gfx-ci.01.org/tree/intel-xe/IGTPW_11633/shard-lnl-7/igt@kms_psr@[email protected]
* igt@kms_universal_plane@cursor-fb-leak:
- {shard-bmg}: [FAIL][108] ([Intel XE#899]) -> [PASS][109] +2 other tests pass
[108]: https://intel-gfx-ci.01.org/tree/intel-xe/IGT_7990/shard-bmg-5/igt@[email protected]
[109]: https://intel-gfx-ci.01.org/tree/intel-xe/IGTPW_11633/shard-bmg-5/igt@[email protected]
* igt@kms_universal_plane@cursor-fb-leak@pipe-d-hdmi-a-6:
- shard-dg2-set2: [FAIL][110] ([Intel XE#899]) -> [PASS][111]
[110]: https://intel-gfx-ci.01.org/tree/intel-xe/IGT_7990/shard-dg2-433/igt@kms_universal_plane@[email protected]
[111]: https://intel-gfx-ci.01.org/tree/intel-xe/IGTPW_11633/shard-dg2-463/igt@kms_universal_plane@[email protected]
* igt@kms_vrr@max-min:
- shard-lnl: [FAIL][112] ([Intel XE#2443]) -> [PASS][113] +1 other test pass
[112]: https://intel-gfx-ci.01.org/tree/intel-xe/IGT_7990/shard-lnl-1/igt@[email protected]
[113]: https://intel-gfx-ci.01.org/tree/intel-xe/IGTPW_11633/shard-lnl-1/igt@[email protected]
* igt@xe_evict@evict-beng-threads-large:
- {shard-bmg}: [TIMEOUT][114] ([Intel XE#1473]) -> [PASS][115] +1 other test pass
[114]: https://intel-gfx-ci.01.org/tree/intel-xe/IGT_7990/shard-bmg-1/igt@[email protected]
[115]: https://intel-gfx-ci.01.org/tree/intel-xe/IGTPW_11633/shard-bmg-7/igt@[email protected]
- shard-dg2-set2: [TIMEOUT][116] ([Intel XE#1473]) -> [PASS][117]
[116]: https://intel-gfx-ci.01.org/tree/intel-xe/IGT_7990/shard-dg2-432/igt@[email protected]
[117]: https://intel-gfx-ci.01.org/tree/intel-xe/IGTPW_11633/shard-dg2-463/igt@[email protected]
* igt@xe_exec_reset@parallel-gt-reset:
- {shard-bmg}: [TIMEOUT][118] ([Intel XE#2105]) -> [PASS][119]
[118]: https://intel-gfx-ci.01.org/tree/intel-xe/IGT_7990/shard-bmg-2/igt@[email protected]
[119]: https://intel-gfx-ci.01.org/tree/intel-xe/IGTPW_11633/shard-bmg-1/igt@[email protected]
- shard-dg2-set2: [TIMEOUT][120] ([Intel XE#2105]) -> [PASS][121]
[120]: https://intel-gfx-ci.01.org/tree/intel-xe/IGT_7990/shard-dg2-436/igt@[email protected]
[121]: https://intel-gfx-ci.01.org/tree/intel-xe/IGTPW_11633/shard-dg2-433/igt@[email protected]
* igt@xe_live_ktest@xe_bo:
- shard-dg2-set2: [SKIP][122] ([Intel XE#1192]) -> [PASS][123]
[122]: https://intel-gfx-ci.01.org/tree/intel-xe/IGT_7990/shard-dg2-432/igt@xe_live_ktest@xe_bo.html
[123]: https://intel-gfx-ci.01.org/tree/intel-xe/IGTPW_11633/shard-dg2-432/igt@xe_live_ktest@xe_bo.html
* igt@xe_oa@oa-regs-whitelisted:
- {shard-bmg}: [FAIL][124] ([Intel XE#2514]) -> [PASS][125]
[124]: https://intel-gfx-ci.01.org/tree/intel-xe/IGT_7990/shard-bmg-4/igt@[email protected]
[125]: https://intel-gfx-ci.01.org/tree/intel-xe/IGTPW_11633/shard-bmg-3/igt@[email protected]
* igt@xe_pm@s4-basic-exec:
- shard-lnl: [ABORT][126] ([Intel XE#1358] / [Intel XE#1607] / [Intel XE#1794]) -> [PASS][127] +1 other test pass
[126]: https://intel-gfx-ci.01.org/tree/intel-xe/IGT_7990/shard-lnl-2/igt@[email protected]
[127]: https://intel-gfx-ci.01.org/tree/intel-xe/IGTPW_11633/shard-lnl-7/igt@[email protected]
* igt@xe_pm@s4-d3hot-basic-exec:
- shard-dg2-set2: [DMESG-WARN][128] ([Intel XE#2019]) -> [PASS][129]
[128]: https://intel-gfx-ci.01.org/tree/intel-xe/IGT_7990/shard-dg2-435/igt@[email protected]
[129]: https://intel-gfx-ci.01.org/tree/intel-xe/IGTPW_11633/shard-dg2-435/igt@[email protected]
* igt@xe_pm@s4-vm-bind-unbind-all:
- shard-lnl: [ABORT][130] ([Intel XE#1794]) -> [PASS][131]
[130]: https://intel-gfx-ci.01.org/tree/intel-xe/IGT_7990/shard-lnl-2/igt@[email protected]
[131]: https://intel-gfx-ci.01.org/tree/intel-xe/IGTPW_11633/shard-lnl-7/igt@[email protected]
* igt@xe_pm_residency@toggle-gt-c6:
- shard-lnl: [FAIL][132] ([Intel XE#958]) -> [PASS][133]
[132]: https://intel-gfx-ci.01.org/tree/intel-xe/IGT_7990/shard-lnl-8/igt@[email protected]
[133]: https://intel-gfx-ci.01.org/tree/intel-xe/IGTPW_11633/shard-lnl-5/igt@[email protected]
#### Warnings ####
* igt@kms_big_fb@4-tiled-32bpp-rotate-90:
- shard-dg2-set2: [SKIP][134] ([Intel XE#1201] / [Intel XE#316]) -> [SKIP][135] ([Intel XE#316]) +1 other test skip
[134]: https://intel-gfx-ci.01.org/tree/intel-xe/IGT_7990/shard-dg2-434/igt@[email protected]
[135]: https://intel-gfx-ci.01.org/tree/intel-xe/IGTPW_11633/shard-dg2-432/igt@[email protected]
* igt@kms_big_fb@linear-32bpp-rotate-90:
- shard-dg2-set2: [SKIP][136] ([Intel XE#316]) -> [SKIP][137] ([Intel XE#1201] / [Intel XE#316]) +2 other tests skip
[136]: https://intel-gfx-ci.01.org/tree/intel-xe/IGT_7990/shard-dg2-432/igt@[email protected]
[137]: https://intel-gfx-ci.01.org/tree/intel-xe/IGTPW_11633/shard-dg2-433/igt@[email protected]
* igt@kms_big_fb@y-tiled-addfb:
- shard-dg2-set2: [SKIP][138] ([Intel XE#1201] / [Intel XE#619]) -> [SKIP][139] ([Intel XE#619])
[138]: https://intel-gfx-ci.01.org/tree/intel-xe/IGT_7990/shard-dg2-463/igt@[email protected]
[139]: https://intel-gfx-ci.01.org/tree/intel-xe/IGTPW_11633/shard-dg2-432/igt@[email protected]
* igt@kms_big_fb@yf-tiled-32bpp-rotate-180:
- shard-dg2-set2: [SKIP][140] ([Intel XE#1124]) -> [SKIP][141] ([Intel XE#1124] / [Intel XE#1201]) +7 other tests skip
[140]: https://intel-gfx-ci.01.org/tree/intel-xe/IGT_7990/shard-dg2-432/igt@[email protected]
[141]: https://intel-gfx-ci.01.org/tree/intel-xe/IGTPW_11633/shard-dg2-435/igt@[email protected]
* igt@kms_big_fb@yf-tiled-64bpp-rotate-180:
- shard-dg2-set2: [SKIP][142] ([Intel XE#1124] / [Intel XE#1201]) -> [SKIP][143] ([Intel XE#1124]) +9 other tests skip
[142]: https://intel-gfx-ci.01.org/tree/intel-xe/IGT_7990/shard-dg2-435/igt@[email protected]
[143]: https://intel-gfx-ci.01.org/tree/intel-xe/IGTPW_11633/shard-dg2-432/igt@[email protected]
* igt@kms_big_fb@yf-tiled-addfb-size-offset-overflow:
- shard-dg2-set2: [SKIP][144] ([Intel XE#607]) -> [SKIP][145] ([Intel XE#1201] / [Intel XE#607])
[144]: https://intel-gfx-ci.01.org/tree/intel-xe/IGT_7990/shard-dg2-432/igt@[email protected]
[145]: https://intel-gfx-ci.01.org/tree/intel-xe/IGTPW_11633/shard-dg2-466/igt@[email protected]
* igt@kms_big_joiner@invalid-modeset:
- shard-dg2-set2: [SKIP][146] ([Intel XE#1201] / [Intel XE#346]) -> [SKIP][147] ([Intel XE#346])
[146]: https://intel-gfx-ci.01.org/tree/intel-xe/IGT_7990/shard-dg2-466/igt@[email protected]
[147]: https://intel-gfx-ci.01.org/tree/intel-xe/IGTPW_11633/shard-dg2-432/igt@[email protected]
* igt@kms_bw@connected-linear-tiling-3-displays-1920x1080p:
- shard-dg2-set2: [SKIP][148] ([Intel XE#1201] / [Intel XE#2191]) -> [SKIP][149] ([Intel XE#2191])
[148]: https://intel-gfx-ci.01.org/tree/intel-xe/IGT_7990/shard-dg2-434/igt@[email protected]
[149]: https://intel-gfx-ci.01.org/tree/intel-xe/IGTPW_11633/shard-dg2-432/igt@[email protected]
* igt@kms_bw@connected-linear-tiling-4-displays-1920x1080p:
- shard-dg2-set2: [SKIP][150] ([Intel XE#2191]) -> [SKIP][151] ([Intel XE#1201] / [Intel XE#2191])
[150]: https://intel-gfx-ci.01.org/tree/intel-xe/IGT_7990/shard-dg2-432/igt@[email protected]
[151]: https://intel-gfx-ci.01.org/tree/intel-xe/IGTPW_11633/shard-dg2-436/igt@[email protected]
* igt@kms_bw@linear-tiling-1-displays-2160x1440p:
- shard-dg2-set2: [SKIP][152] ([Intel XE#367]) -> [SKIP][153] ([Intel XE#1201] / [Intel XE#367])
[152]: https://intel-gfx-ci.01.org/tree/intel-xe/IGT_7990/shard-dg2-432/igt@[email protected]
[153]: https://intel-gfx-ci.01.org/tree/intel-xe/IGTPW_11633/shard-dg2-435/igt@[email protected]
* igt@kms_bw@linear-tiling-4-displays-2560x1440p:
- shard-dg2-set2: [SKIP][154] ([Intel XE#1201] / [Intel XE#367]) -> [SKIP][155] ([Intel XE#367]) +2 other tests skip
[154]: https://intel-gfx-ci.01.org/tree/intel-xe/IGT_7990/shard-dg2-435/igt@[email protected]
[155]: https://intel-gfx-ci.01.org/tree/intel-xe/IGTPW_11633/shard-dg2-432/igt@[email protected]
* igt@kms_ccs@bad-rotation-90-y-tiled-gen12-mc-ccs@pipe-d-dp-4:
- shard-dg2-set2: [SKIP][156] ([Intel XE#455] / [Intel XE#787]) -> [SKIP][157] ([Intel XE#1201] / [Intel XE#455] / [Intel XE#787]) +13 other tests skip
[156]: https://intel-gfx-ci.01.org/tree/intel-xe/IGT_7990/shard-dg2-432/igt@kms_ccs@[email protected]
[157]: https://intel-gfx-ci.01.org/tree/intel-xe/IGTPW_11633/shard-dg2-466/igt@kms_ccs@[email protected]
* igt@kms_ccs@crc-primary-basic-y-tiled-gen12-rc-ccs-cc@pipe-a-dp-4:
- shard-dg2-set2: [SKIP][158] ([Intel XE#787]) -> [SKIP][159] ([Intel XE#1201] / [Intel XE#787]) +48 other tests skip
[158]: https://intel-gfx-ci.01.org/tree/intel-xe/IGT_7990/shard-dg2-432/igt@kms_ccs@[email protected]
[159]: https://intel-gfx-ci.01.org/tree/intel-xe/IGTPW_11633/shard-dg2-435/igt@kms_ccs@[email protected]
* igt@kms_ccs@crc-sprite-planes-basic-4-tiled-mtl-rc-ccs-cc@pipe-c-hdmi-a-6:
- shard-dg2-set2: [SKIP][160] ([Intel XE#1201] / [Intel XE#787]) -> [SKIP][161] ([Intel XE#787]) +48 other tests skip
[160]: https://intel-gfx-ci.01.org/tree/intel-xe/IGT_7990/shard-dg2-466/igt@kms_ccs@crc-sprite-planes-basic-4-tiled-mtl-rc-ccs-cc@pipe-c-hdmi-a-6.html
[161]: https://intel-gfx-ci.01.org/tree/intel-xe/IGTPW_11633/shard-dg2-432/igt@kms_ccs@crc-sprite-planes-basic-4-tiled-mtl-rc-ccs-cc@pipe-c-hdmi-a-6.html
* igt@kms_ccs@random-ccs-data-4-tiled-mtl-mc-ccs:
- shard-dg2-set2: [SKIP][162] ([Intel XE#1201] / [Intel XE#455] / [Intel XE#787]) -> [SKIP][163] ([Intel XE#455] / [Intel XE#787]) +13 other tests skip
[162]: https://intel-gfx-ci.01.org/tree/intel-xe/IGT_7990/shard-dg2-436/igt@[email protected]
[163]: https://intel-gfx-ci.01.org/tree/intel-xe/IGTPW_11633/shard-dg2-432/igt@[email protected]
* igt@kms_cdclk@mode-transition@pipe-d-dp-4:
- shard-dg2-set2: [SKIP][164] ([Intel XE#314]) -> [SKIP][165] ([Intel XE#1201] / [Intel XE#314]) +3 other tests skip
[164]: https://intel-gfx-ci.01.org/tree/intel-xe/IGT_7990/shard-dg2-432/igt@kms_cdclk@[email protected]
[165]: https://intel-gfx-ci.01.org/tree/intel-xe/IGTPW_11633/shard-dg2-466/igt@kms_cdclk@[email protected]
* igt@kms_chamelium_audio@dp-audio:
- shard-dg2-set2: [SKIP][166] ([Intel XE#1201] / [Intel XE#373]) -> [SKIP][167] ([Intel XE#373]) +7 other tests skip
[166]: https://intel-gfx-ci.01.org/tree/intel-xe/IGT_7990/shard-dg2-434/igt@[email protected]
[167]: https://intel-gfx-ci.01.org/tree/intel-xe/IGTPW_11633/shard-dg2-432/igt@[email protected]
* igt@kms_chamelium_color@ctm-red-to-blue:
- shard-dg2-set2: [SKIP][168] ([Intel XE#1201] / [Intel XE#306]) -> [SKIP][169] ([Intel XE#306]) +1 other test skip
[168]: https://intel-gfx-ci.01.org/tree/intel-xe/IGT_7990/shard-dg2-463/igt@[email protected]
[169]: https://intel-gfx-ci.01.org/tree/intel-xe/IGTPW_11633/shard-dg2-432/igt@[email protected]
* igt@kms_chamelium_edid@hdmi-edid-stress-resolution-4k:
- shard-dg2-set2: [SKIP][170] ([Intel XE#373]) -> [SKIP][171] ([Intel XE#1201] / [Intel XE#373]) +6 other tests skip
[170]: https://intel-gfx-ci.01.org/tree/intel-xe/IGT_7990/shard-dg2-432/igt@[email protected]
[171]: https://intel-gfx-ci.01.org/tree/intel-xe/IGTPW_11633/shard-dg2-436/igt@[email protected]
* igt@kms_cursor_crc@cursor-onscreen-512x512:
- shard-dg2-set2: [SKIP][172] ([Intel XE#1201] / [Intel XE#308]) -> [SKIP][173] ([Intel XE#308]) +1 other test skip
[172]: https://intel-gfx-ci.01.org/tree/intel-xe/IGT_7990/shard-dg2-436/igt@[email protected]
[173]: https://intel-gfx-ci.01.org/tree/intel-xe/IGTPW_11633/shard-dg2-432/igt@[email protected]
* igt@kms_cursor_legacy@basic-busy-flip-before-cursor-varying-size:
- shard-dg2-set2: [SKIP][174] ([Intel XE#1201] / [Intel XE#323]) -> [SKIP][175] ([Intel XE#323]) +1 other test skip
[174]: https://intel-gfx-ci.01.org/tree/intel-xe/IGT_7990/shard-dg2-436/igt@kms_cursor_legacy@basic-busy-flip-before-cursor-varying-size.html
[175]: https://intel-gfx-ci.01.org/tree/intel-xe/IGTPW_11633/shard-dg2-432/igt@kms_cursor_legacy@basic-busy-flip-before-cursor-varying-size.html
* igt@kms_feature_discovery@chamelium:
- shard-dg2-set2: [SKIP][176] ([Intel XE#1201] / [Intel XE#701]) -> [SKIP][177] ([Intel XE#701])
[176]: https://intel-gfx-ci.01.org/tree/intel-xe/IGT_7990/shard-dg2-466/igt@[email protected]
[177]: https://intel-gfx-ci.01.org/tree/intel-xe/IGTPW_11633/shard-dg2-432/igt@[email protected]
* igt@kms_feature_discovery@display-3x:
- shard-dg2-set2: [SKIP][178] ([Intel XE#703]) -> [SKIP][179] ([Intel XE#1201] / [Intel XE#703])
[178]: https://intel-gfx-ci.01.org/tree/intel-xe/IGT_7990/shard-dg2-432/igt@[email protected]
[179]: https://intel-gfx-ci.01.org/tree/intel-xe/IGTPW_11633/shard-dg2-433/igt@[email protected]
* igt@kms_feature_discovery@dp-mst:
- shard-dg2-set2: [SKIP][180] ([Intel XE#1137] / [Intel XE#1201]) -> [SKIP][181] ([Intel XE#1137])
[180]: https://intel-gfx-ci.01.org/tree/intel-xe/IGT_7990/shard-dg2-435/igt@[email protected]
[181]: https://intel-gfx-ci.01.org/tree/intel-xe/IGTPW_11633/shard-dg2-432/igt@[email protected]
* igt@kms_flip_scaled_crc@flip-32bpp-yftileccs-to-64bpp-yftile-upscaling:
- shard-dg2-set2: [SKIP][182] ([Intel XE#455]) -> [SKIP][183] ([Intel XE#1201] / [Intel XE#455]) +4 other tests skip
[182]: https://intel-gfx-ci.01.org/tree/intel-xe/IGT_7990/shard-dg2-432/igt@kms_flip_scaled_crc@flip-32bpp-yftileccs-to-64bpp-yftile-upscaling.html
[183]: https://intel-gfx-ci.01.org/tree/intel-xe/IGTPW_11633/shard-dg2-463/igt@kms_flip_scaled_crc@flip-32bpp-yftileccs-to-64bpp-yftile-upscaling.html
* igt@kms_flip_scaled_crc@flip-64bpp-ytile-to-32bpp-ytilegen12rcccs-upscaling:
- shard-dg2-set2: [SKIP][184] ([Intel XE#1201] / [Intel XE#455]) -> [SKIP][185] ([Intel XE#455]) +21 other tests skip
[184]: https://intel-gfx-ci.01.org/tree/intel-xe/IGT_7990/shard-dg2-433/igt@kms_flip_scaled_crc@flip-64bpp-ytile-to-32bpp-ytilegen12rcccs-upscaling.html
[185]: https://intel-gfx-ci.01.org/tree/intel-xe/IGTPW_11633/shard-dg2-432/igt@kms_flip_scaled_crc@flip-64bpp-ytile-to-32bpp-ytilegen12rcccs-upscaling.html
* igt@kms_frontbuffer_tracking@fbcdrrs-2p-scndscrn-shrfb-pgflip-blt:
- shard-dg2-set2: [SKIP][186] ([Intel XE#651]) -> [SKIP][187] ([Intel XE#1201] / [Intel XE#651]) +16 other tests skip
[186]: https://intel-gfx-ci.01.org/tree/intel-xe/IGT_7990/shard-dg2-432/igt@kms_frontbuffer_tracking@fbcdrrs-2p-scndscrn-shrfb-pgflip-blt.html
[187]: https://intel-gfx-ci.01.org/tree/intel-xe/IGTPW_11633/shard-dg2-436/igt@kms_frontbuffer_tracking@fbcdrrs-2p-scndscrn-shrfb-pgflip-blt.html
* igt@kms_frontbuffer_tracking@fbcdrrs-rgb101010-draw-mmap-wc:
- shard-dg2-set2: [SKIP][188] ([Intel XE#1201] / [Intel XE#651]) -> [SKIP][189] ([Intel XE#651]) +24 other tests skip
[188]: https://intel-gfx-ci.01.org/tree/intel-xe/IGT_7990/shard-dg2-466/igt@[email protected]
[189]: https://intel-gfx-ci.01.org/tree/intel-xe/IGTPW_11633/shard-dg2-432/igt@[email protected]
* igt@kms_frontbuffer_tracking@fbcdrrs-tiling-y:
- shard-dg2-set2: [SKIP][190] ([Intel XE#658]) -> [SKIP][191] ([Intel XE#1201] / [Intel XE#658])
[190]: https://intel-gfx-ci.01.org/tree/intel-xe/IGT_7990/shard-dg2-432/igt@[email protected]
[191]: https://intel-gfx-ci.01.org/tree/intel-xe/IGTPW_11633/shard-dg2-433/igt@[email protected]
* igt@kms_frontbuffer_tracking@psr-1p-primscrn-pri-shrfb-draw-mmap-wc:
- shard-dg2-set2: [SKIP][192] ([Intel XE#653]) -> [SKIP][193] ([Intel XE#1201] / [Intel XE#653]) +17 other tests skip
[192]: https://intel-gfx-ci.01.org/tree/intel-xe/IGT_7990/shard-dg2-432/igt@kms_frontbuffer_tracking@psr-1p-primscrn-pri-shrfb-draw-mmap-wc.html
[193]: https://intel-gfx-ci.01.org/tree/intel-xe/IGTPW_11633/shard-dg2-463/igt@kms_frontbuffer_tracking@psr-1p-primscrn-pri-shrfb-draw-mmap-wc.html
* igt@kms_frontbuffer_tracking@psr-2p-primscrn-shrfb-msflip-blt:
- shard-dg2-set2: [SKIP][194] ([Intel XE#1201] / [Intel XE#653]) -> [SKIP][195] ([Intel XE#653]) +25 other tests skip
[194]: https://intel-gfx-ci.01.org/tree/intel-xe/IGT_7990/shard-dg2-434/igt@[email protected]
[195]: https://intel-gfx-ci.01.org/tree/intel-xe/IGTPW_11633/shard-dg2-432/igt@[email protected]
* igt@kms_plane_scaling@plane-downscale-factor-0-25-with-pixel-format:
- shard-dg2-set2: [SKIP][196] ([Intel XE#455] / [Intel XE#498]) -> [SKIP][197] ([Intel XE#1201] / [Intel XE#455] / [Intel XE#498]) +1 other test skip
[196]: https://intel-gfx-ci.01.org/tree/intel-xe/IGT_7990/shard-dg2-432/igt@kms_plane_scaling@plane-downscale-factor-0-25-with-pixel-format.html
[197]: https://intel-gfx-ci.01.org/tree/intel-xe/IGTPW_11633/shard-dg2-433/igt@kms_plane_scaling@plane-downscale-factor-0-25-with-pixel-format.html
* igt@kms_plane_scaling@plane-downscale-factor-0-25-with-pixel-format@pipe-c-hdmi-a-6:
- shard-dg2-set2: [SKIP][198] ([Intel XE#498]) -> [SKIP][199] ([Intel XE#1201] / [Intel XE#498]) +2 other tests skip
[198]: https://intel-gfx-ci.01.org/tree/intel-xe/IGT_7990/shard-dg2-432/igt@kms_plane_scaling@plane-downscale-factor-0-25-with-pixel-format@pipe-c-hdmi-a-6.html
[199]: https://intel-gfx-ci.01.org/tree/intel-xe/IGTPW_11633/shard-dg2-433/igt@kms_plane_scaling@plane-downscale-factor-0-25-with-pixel-format@pipe-c-hdmi-a-6.html
* igt@kms_plane_scaling@planes-downscale-factor-0-25-upscale-factor-0-25:
- shard-dg2-set2: [SKIP][200] ([Intel XE#1201] / [Intel XE#2318] / [Intel XE#455]) -> [SKIP][201] ([Intel XE#2318] / [Intel XE#455]) +1 other test skip
[200]: https://intel-gfx-ci.01.org/tree/intel-xe/IGT_7990/shard-dg2-434/igt@kms_plane_scaling@planes-downscale-factor-0-25-upscale-factor-0-25.html
[201]: https://intel-gfx-ci.01.org/tree/intel-xe/IGTPW_11633/shard-dg2-432/igt@kms_plane_scaling@planes-downscale-factor-0-25-upscale-factor-0-25.html
* igt@kms_plane_scaling@planes-downscale-factor-0-25-upscale-factor-0-25@pipe-c-hdmi-a-6:
- shard-dg2-set2: [SKIP][202] ([Intel XE#1201] / [Intel XE#2318]) -> [SKIP][203] ([Intel XE#2318]) +2 other tests skip
[202]: https://intel-gfx-ci.01.org/tree/intel-xe/IGT_7990/shard-dg2-434/igt@kms_plane_scaling@planes-downscale-factor-0-25-upscale-factor-0-25@pipe-c-hdmi-a-6.html
[203]: https://intel-gfx-ci.01.org/tree/intel-xe/IGTPW_11633/shard-dg2-432/igt@kms_plane_scaling@planes-downscale-factor-0-25-upscale-factor-0-25@pipe-c-hdmi-a-6.html
* igt@kms_plane_scaling@planes-unity-scaling-downscale-factor-0-25@pipe-a-hdmi-a-6:
- shard-dg2-set2: [SKIP][204] ([Intel XE#2318]) -> [SKIP][205] ([Intel XE#1201] / [Intel XE#2318]) +2 other tests skip
[204]: https://intel-gfx-ci.01.org/tree/intel-xe/IGT_7990/shard-dg2-432/igt@kms_plane_scaling@[email protected]
[205]: https://intel-gfx-ci.01.org/tree/intel-xe/IGTPW_11633/shard-dg2-433/igt@kms_plane_scaling@[email protected]
* igt@kms_plane_scaling@planes-unity-scaling-downscale-factor-0-25@pipe-d-hdmi-a-6:
- shard-dg2-set2: [SKIP][206] ([Intel XE#2318] / [Intel XE#455]) -> [SKIP][207] ([Intel XE#1201] / [Intel XE#2318] / [Intel XE#455]) +1 other test skip
[206]: https://intel-gfx-ci.01.org/tree/intel-xe/IGT_7990/shard-dg2-432/igt@kms_plane_scaling@[email protected]
[207]: https://intel-gfx-ci.01.org/tree/intel-xe/IGTPW_11633/shard-dg2-433/igt@kms_plane_scaling@[email protected]
* igt@kms_pm_backlight@bad-brightness:
- shard-dg2-set2: [SKIP][208] ([Intel XE#870]) -> [SKIP][209] ([Intel XE#1201] / [Intel XE#870])
[208]: https://intel-gfx-ci.01.org/tree/intel-xe/IGT_7990/shard-dg2-432/igt@[email protected]
[209]: https://intel-gfx-ci.01.org/tree/intel-xe/IGTPW_11633/shard-dg2-466/igt@[email protected]
* igt@kms_pm_dc@dc5-psr:
- shard-dg2-set2: [SKIP][210] ([Intel XE#1129]) -> [SKIP][211] ([Intel XE#1129] / [Intel XE#1201])
[210]: https://intel-gfx-ci.01.org/tree/intel-xe/IGT_7990/shard-dg2-432/igt@[email protected]
[211]: https://intel-gfx-ci.01.org/tree/intel-xe/IGTPW_11633/shard-dg2-433/igt@[email protected]
* igt@kms_pm_dc@dc6-dpms:
- shard-dg2-set2: [SKIP][212] ([Intel XE#1201] / [Intel XE#908]) -> [SKIP][213] ([Intel XE#908])
[212]: https://intel-gfx-ci.01.org/tree/intel-xe/IGT_7990/shard-dg2-433/igt@[email protected]
[213]: https://intel-gfx-ci.01.org/tree/intel-xe/IGTPW_11633/shard-dg2-432/igt@[email protected]
* igt@kms_psr2_sf@fbc-overlay-primary-update-sf-dmg-area:
- shard-dg2-set2: [SKIP][214] ([Intel XE#1201] / [Intel XE#1489]) -> [SKIP][215] ([Intel XE#1489]) +2 other tests skip
[214]: https://intel-gfx-ci.01.org/tree/intel-xe/IGT_7990/shard-dg2-433/igt@[email protected]
[215]: https://intel-gfx-ci.01.org/tree/intel-xe/IGTPW_11633/shard-dg2-432/igt@[email protected]
* igt@kms_psr2_sf@primary-plane-update-sf-dmg-area-big-fb:
- shard-dg2-set2: [SKIP][216] ([Intel XE#1489]) -> [SKIP][217] ([Intel XE#1201] / [Intel XE#1489]) +3 other tests skip
[216]: https://intel-gfx-ci.01.org/tree/intel-xe/IGT_7990/shard-dg2-432/igt@[email protected]
[217]: https://intel-gfx-ci.01.org/tree/intel-xe/IGTPW_11633/shard-dg2-433/igt@[email protected]
* igt@kms_psr2_su@frontbuffer-xrgb8888:
- shard-dg2-set2: [SKIP][218] ([Intel XE#1122] / [Intel XE#1201]) -> [SKIP][219] ([Intel XE#1122])
[218]: https://intel-gfx-ci.01.org/tree/intel-xe/IGT_7990/shard-dg2-433/igt@[email protected]
[219]: https://intel-gfx-ci.01.org/tree/intel-xe/IGTPW_11633/shard-dg2-432/igt@[email protected]
* igt@kms_psr@fbc-psr-sprite-render:
- shard-dg2-set2: [SKIP][220] ([Intel XE#1201] / [Intel XE#929]) -> [SKIP][221] ([Intel XE#929]) +13 other tests skip
[220]: https://intel-gfx-ci.01.org/tree/intel-xe/IGT_7990/shard-dg2-436/igt@[email protected]
[221]: https://intel-gfx-ci.01.org/tree/intel-xe/IGTPW_11633/shard-dg2-432/igt@[email protected]
* igt@kms_psr@fbc-psr2-sprite-plane-move:
- shard-dg2-set2: [SKIP][222] ([Intel XE#929]) -> [SKIP][223] ([Intel XE#1201] / [Intel XE#929]) +9 other tests skip
[222]: https://intel-gfx-ci.01.org/tree/intel-xe/IGT_7990/shard-dg2-432/igt@[email protected]
[223]: https://intel-gfx-ci.01.org/tree/intel-xe/IGTPW_11633/shard-dg2-433/igt@[email protected]
* igt@kms_rotation_crc@bad-tiling:
- shard-dg2-set2: [SKIP][224] ([Intel XE#1201] / [Intel XE#327]) -> [SKIP][225] ([Intel XE#327])
[224]: https://intel-gfx-ci.01.org/tree/intel-xe/IGT_7990/shard-dg2-435/igt@[email protected]
[225]: https://intel-gfx-ci.01.org/tree/intel-xe/IGTPW_11633/shard-dg2-432/igt@[email protected]
* igt@kms_rotation_crc@primary-y-tiled-reflect-x-90:
- shard-dg2-set2: [SKIP][226] ([Intel XE#327]) -> [SKIP][227] ([Intel XE#1201] / [Intel XE#327])
[226]: https://intel-gfx-ci.01.org/tree/intel-xe/IGT_7990/shard-dg2-432/igt@[email protected]
[227]: https://intel-gfx-ci.01.org/tree/intel-xe/IGTPW_11633/shard-dg2-436/igt@[email protected]
* igt@kms_rotation_crc@primary-yf-tiled-reflect-x-0:
- shard-dg2-set2: [SKIP][228] ([Intel XE#1127] / [Intel XE#1201]) -> [SKIP][229] ([Intel XE#1127])
[228]: https://intel-gfx-ci.01.org/tree/intel-xe/IGT_7990/shard-dg2-436/igt@[email protected]
[229]: https://intel-gfx-ci.01.org/tree/intel-xe/IGTPW_11633/shard-dg2-432/igt@[email protected]
* igt@kms_tv_load_detect@load-detect:
- shard-dg2-set2: [SKIP][230] ([Intel XE#1201] / [Intel XE#330]) -> [SKIP][231] ([Intel XE#330])
[230]: https://intel-gfx-ci.01.org/tree/intel-xe/IGT_7990/shard-dg2-435/igt@[email protected]
[231]: https://intel-gfx-ci.01.org/tree/intel-xe/IGTPW_11633/shard-dg2-432/igt@[email protected]
* igt@kms_vrr@lobf:
- shard-dg2-set2: [SKIP][232] ([Intel XE#1201] / [Intel XE#2168]) -> [SKIP][233] ([Intel XE#2168])
[232]: https://intel-gfx-ci.01.org/tree/intel-xe/IGT_7990/shard-dg2-435/igt@[email protected]
[233]: https://intel-gfx-ci.01.org/tree/intel-xe/IGTPW_11633/shard-dg2-432/igt@[email protected]
* igt@kms_writeback@writeback-fb-id:
- shard-dg2-set2: [SKIP][234] ([Intel XE#1201] / [Intel XE#756]) -> [SKIP][235] ([Intel XE#756]) +1 other test skip
[234]: https://intel-gfx-ci.01.org/tree/intel-xe/IGT_7990/shard-dg2-433/igt@[email protected]
[235]: https://intel-gfx-ci.01.org/tree/intel-xe/IGTPW_11633/shard-dg2-432/igt@[email protected]
* igt@sriov_basic@enable-vfs-bind-unbind-each-numvfs-all:
- shard-dg2-set2: [SKIP][236] ([Intel XE#1091]) -> [SKIP][237] ([Intel XE#1091] / [Intel XE#1201])
[236]: https://intel-gfx-ci.01.org/tree/intel-xe/IGT_7990/shard-dg2-432/igt@[email protected]
[237]: https://intel-gfx-ci.01.org/tree/intel-xe/IGTPW_11633/shard-dg2-466/igt@[email protected]
* igt@xe_compute_preempt@compute-preempt:
- shard-dg2-set2: [SKIP][238] ([Intel XE#1280] / [Intel XE#455]) -> [SKIP][239] ([Intel XE#1201] / [Intel XE#1280] / [Intel XE#455]) +1 other test skip
[238]: https://intel-gfx-ci.01.org/tree/intel-xe/IGT_7990/shard-dg2-432/igt@[email protected]
[239]: https://intel-gfx-ci.01.org/tree/intel-xe/IGTPW_11633/shard-dg2-433/igt@[email protected]
* igt@xe_compute_preempt@compute-threadgroup-preempt@engine-drm_xe_engine_class_compute:
- shard-dg2-set2: [SKIP][240] ([Intel XE#1201] / [Intel XE#1280] / [Intel XE#455]) -> [SKIP][241] ([Intel XE#1280] / [Intel XE#455]) +1 other test skip
[240]: https://intel-gfx-ci.01.org/tree/intel-xe/IGT_7990/shard-dg2-435/igt@xe_compute_preempt@compute-threadgroup-preempt@engine-drm_xe_engine_class_compute.html
[241]: https://intel-gfx-ci.01.org/tree/intel-xe/IGTPW_11633/shard-dg2-432/igt@xe_compute_preempt@compute-threadgroup-preempt@engine-drm_xe_engine_class_compute.html
* igt@xe_copy_basic@mem-copy-linear-0x3fff:
- shard-dg2-set2: [SKIP][242] ([Intel XE#1123] / [Intel XE#1201]) -> [SKIP][243] ([Intel XE#1123])
[242]: https://intel-gfx-ci.01.org/tree/intel-xe/IGT_7990/shard-dg2-436/igt@[email protected]
[243]: https://intel-gfx-ci.01.org/tree/intel-xe/IGTPW_11633/shard-dg2-432/igt@[email protected]
* igt@xe_copy_basic@mem-set-linear-0xfffe:
- shard-dg2-set2: [SKIP][244] ([Intel XE#1126] / [Intel XE#1201]) -> [SKIP][245] ([Intel XE#1126])
[244]: https://intel-gfx-ci.01.org/tree/intel-xe/IGT_7990/shard-dg2-434/igt@[email protected]
[245]: https://intel-gfx-ci.01.org/tree/intel-xe/IGTPW_11633/shard-dg2-432/igt@[email protected]
* igt@xe_exec_fault_mode@once-bindexecqueue-imm:
- shard-dg2-set2: [SKIP][246] ([Intel XE#288]) -> [SKIP][247] ([Intel XE#1201] / [Intel XE#288]) +14 other tests skip
[246]: https://intel-gfx-ci.01.org/tree/intel-xe/IGT_7990/shard-dg2-432/igt@[email protected]
[247]: https://intel-gfx-ci.01.org/tree/intel-xe/IGTPW_11633/shard-dg2-463/igt@[email protected]
* igt@xe_exec_fault_mode@twice-userptr-invalidate-race:
- shard-dg2-set2: [SKIP][248] ([Intel XE#1201] / [Intel XE#288]) -> [SKIP][249] ([Intel XE#288]) +22 other tests skip
[248]: https://intel-gfx-ci.01.org/tree/intel-xe/IGT_7990/shard-dg2-433/igt@[email protected]
[249]: https://intel-gfx-ci.01.org/tree/intel-xe/IGTPW_11633/shard-dg2-432/igt@[email protected]
* igt@xe_live_ktest@xe_migrate@xe_validate_ccs_kunit:
- shard-dg2-set2: [SKIP][250] ([Intel XE#1201] / [Intel XE#2229]) -> [SKIP][251] ([Intel XE#2229])
[250]: https://intel-gfx-ci.01.org/tree/intel-xe/IGT_7990/shard-dg2-466/igt@xe_live_ktest@xe_migrate@xe_validate_ccs_kunit.html
[251]: https://intel-gfx-ci.01.org/tree/intel-xe/IGTPW_11633/shard-dg2-432/igt@xe_live_ktest@xe_migrate@xe_validate_ccs_kunit.html
* igt@xe_module_load@force-load:
- shard-dg2-set2: [SKIP][252] ([Intel XE#1201] / [Intel XE#378]) -> [SKIP][253] ([Intel XE#378])
[252]: https://intel-gfx-ci.01.org/tree/intel-xe/IGT_7990/shard-dg2-435/igt@[email protected]
[253]: https://intel-gfx-ci.01.org/tree/intel-xe/IGTPW_11633/shard-dg2-432/igt@[email protected]
* igt@xe_oa@oa-unit-exclusive-stream-sample-oa:
- shard-dg2-set2: [SKIP][254] ([Intel XE#1201] / [Intel XE#2541]) -> [SKIP][255] ([Intel XE#2541]) +4 other tests skip
[254]: https://intel-gfx-ci.01.org/tree/intel-xe/IGT_7990/shard-dg2-436/igt@[email protected]
[255]: https://intel-gfx-ci.01.org/tree/intel-xe/IGTPW_11633/shard-dg2-432/igt@[email protected]
* igt@xe_oa@polling-small-buf:
- shard-dg2-set2: [SKIP][256] ([Intel XE#2541]) -> [SKIP][257] ([Intel XE#1201] / [Intel XE#2541]) +2 other tests skip
[256]: https://intel-gfx-ci.01.org/tree/intel-xe/IGT_7990/shard-dg2-432/igt@[email protected]
[257]: https://intel-gfx-ci.01.org/tree/intel-xe/IGTPW_11633/shard-dg2-463/igt@[email protected]
* igt@xe_pat@pat-index-xe2:
- shard-dg2-set2: [SKIP][258] ([Intel XE#977]) -> [SKIP][259] ([Intel XE#1201] / [Intel XE#977])
[258]: https://intel-gfx-ci.01.org/tree/intel-xe/IGT_7990/shard-dg2-432/igt@[email protected]
[259]: https://intel-gfx-ci.01.org/tree/intel-xe/IGTPW_11633/shard-dg2-463/igt@[email protected]
* igt@xe_pat@pat-index-xehpc:
- shard-dg2-set2: [SKIP][260] ([Intel XE#1201] / [Intel XE#979]) -> [SKIP][261] ([Intel XE#979])
[260]: https://intel-gfx-ci.01.org/tree/intel-xe/IGT_7990/shard-dg2-433/igt@[email protected]
[261]: https://intel-gfx-ci.01.org/tree/intel-xe/IGTPW_11633/shard-dg2-432/igt@[email protected]
* igt@xe_pat@pat-index-xelpg:
- shard-dg2-set2: [SKIP][262] ([Intel XE#979]) -> [SKIP][263] ([Intel XE#1201] / [Intel XE#979])
[262]: https://intel-gfx-ci.01.org/tree/intel-xe/IGT_7990/shard-dg2-432/igt@[email protected]
[263]: https://intel-gfx-ci.01.org/tree/intel-xe/IGTPW_11633/shard-dg2-435/igt@[email protected]
* igt@xe_pm@d3cold-basic-exec:
- shard-dg2-set2: [SKIP][264] ([Intel XE#1201] / [Intel XE#2284] / [Intel XE#366]) -> [SKIP][265] ([Intel XE#2284] / [Intel XE#366]) +1 other test skip
[264]: https://intel-gfx-ci.01.org/tree/intel-xe/IGT_7990/shard-dg2-436/igt@[email protected]
[265]: https://intel-gfx-ci.01.org/tree/intel-xe/IGTPW_11633/shard-dg2-432/igt@[email protected]
* igt@xe_query@multigpu-query-engines:
- shard-dg2-set2: [SKIP][266] ([Intel XE#1201] / [Intel XE#944]) -> [SKIP][267] ([Intel XE#944]) +1 other test skip
[266]: https://intel-gfx-ci.01.org/tree/intel-xe/IGT_7990/shard-dg2-436/igt@[email protected]
[267]: https://intel-gfx-ci.01.org/tree/intel-xe/IGTPW_11633/shard-dg2-432/igt@[email protected]
* igt@xe_query@multigpu-query-oa-units:
- shard-dg2-set2: [SKIP][268] ([Intel XE#944]) -> [SKIP][269] ([Intel XE#1201] / [Intel XE#944]) +2 other tests skip
[268]: https://intel-gfx-ci.01.org/tree/intel-xe/IGT_7990/shard-dg2-432/igt@[email protected]
[269]: https://intel-gfx-ci.01.org/tree/intel-xe/IGTPW_11633/shard-dg2-466/igt@[email protected]
* igt@xe_wedged@wedged-at-any-timeout:
- shard-dg2-set2: [DMESG-WARN][270] ([Intel XE#1760]) -> [INCOMPLETE][271] ([Intel XE#1195] / [Intel XE#1760])
[270]: https://intel-gfx-ci.01.org/tree/intel-xe/IGT_7990/shard-dg2-433/igt@[email protected]
[271]: https://intel-gfx-ci.01.org/tree/intel-xe/IGTPW_11633/shard-dg2-435/igt@[email protected]
{name}: This element is suppressed. This means it is ignored when computing
the status of the difference (SUCCESS, WARNING, or FAILURE).
[Intel XE#1091]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/1091
[Intel XE#1122]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/1122
[Intel XE#1123]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/1123
[Intel XE#1124]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/1124
[Intel XE#1126]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/1126
[Intel XE#1127]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/1127
[Intel XE#1128]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/1128
[Intel XE#1129]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/1129
[Intel XE#1137]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/1137
[Intel XE#1188]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/1188
[Intel XE#1192]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/1192
[Intel XE#1195]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/1195
[Intel XE#1201]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/1201
[Intel XE#1280]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/1280
[Intel XE#1358]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/1358
[Intel XE#1392]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/1392
[Intel XE#1397]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/1397
[Intel XE#1399]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/1399
[Intel XE#1401]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/1401
[Intel XE#1406]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/1406
[Intel XE#1407]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/1407
[Intel XE#1421]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/1421
[Intel XE#1424]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/1424
[Intel XE#1426]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/1426
[Intel XE#1437]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/1437
[Intel XE#1439]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/1439
[Intel XE#1466]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/1466
[Intel XE#1473]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/1473
[Intel XE#1489]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/1489
[Intel XE#1499]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/1499
[Intel XE#1503]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/1503
[Intel XE#1551]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/1551
[Intel XE#1607]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/1607
[Intel XE#1649]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/1649
[Intel XE#1656]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/1656
[Intel XE#1659]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/1659
[Intel XE#1695]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/1695
[Intel XE#1725]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/1725
[Intel XE#1729]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/1729
[Intel XE#1745]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/1745
[Intel XE#1760]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/1760
[Intel XE#1794]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/1794
[Intel XE#1948]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/1948
[Intel XE#2019]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/2019
[Intel XE#2105]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/2105
[Intel XE#2168]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/2168
[Intel XE#2191]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/2191
[Intel XE#2229]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/2229
[Intel XE#2234]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/2234
[Intel XE#2251]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/2251
[Intel XE#2252]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/2252
[Intel XE#2280]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/2280
[Intel XE#2284]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/2284
[Intel XE#2311]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/2311
[Intel XE#2313]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/2313
[Intel XE#2318]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/2318
[Intel XE#2320]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/2320
[Intel XE#2322]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/2322
[Intel XE#2327]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/2327
[Intel XE#2333]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/2333
[Intel XE#2357]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/2357
[Intel XE#2426]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/2426
[Intel XE#2436]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/2436
[Intel XE#2443]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/2443
[Intel XE#2472]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/2472
[Intel XE#2497]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/2497
[Intel XE#2509]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/2509
[Intel XE#2514]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/2514
[Intel XE#2541]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/2541
[Intel XE#2597]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/2597
[Intel XE#288]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/288
[Intel XE#306]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/306
[Intel XE#308]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/308
[Intel XE#309]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/309
[Intel XE#314]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/314
[Intel XE#316]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/316
[Intel XE#323]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/323
[Intel XE#324]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/324
[Intel XE#327]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/327
[Intel XE#330]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/330
[Intel XE#346]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/346
[Intel XE#361]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/361
[Intel XE#366]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/366
[Intel XE#367]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/367
[Intel XE#373]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/373
[Intel XE#374]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/374
[Intel XE#378]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/378
[Intel XE#455]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/455
[Intel XE#498]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/498
[Intel XE#569]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/569
[Intel XE#599]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/599
[Intel XE#605]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/605
[Intel XE#607]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/607
[Intel XE#619]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/619
[Intel XE#651]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/651
[Intel XE#653]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/653
[Intel XE#656]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/656
[Intel XE#658]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/658
[Intel XE#688]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/688
[Intel XE#701]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/701
[Intel XE#703]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/703
[Intel XE#718]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/718
[Intel XE#736]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/736
[Intel XE#756]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/756
[Intel XE#787]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/787
[Intel XE#870]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/870
[Intel XE#877]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/877
[Intel XE#886]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/886
[Intel XE#899]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/899
[Intel XE#908]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/908
[Intel XE#911]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/911
[Intel XE#929]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/929
[Intel XE#944]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/944
[Intel XE#958]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/958
[Intel XE#977]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/977
[Intel XE#979]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/979
Build changes
-------------
* IGT: IGT_7990 -> IGTPW_11633
* Linux: xe-1822-411a047925bb7e169a075a2ddfb63ba96f26a8c8 -> xe-1823-5626fe5d6eeb0949727861375b27d67ee71feaa7
IGTPW_11633: 11633
IGT_7990: 9ca5ff0afa3636478b6ba5a97e5ba440cfb2e55e @ https://gitlab.freedesktop.org/drm/igt-gpu-tools.git
xe-1822-411a047925bb7e169a075a2ddfb63ba96f26a8c8: 411a047925bb7e169a075a2ddfb63ba96f26a8c8 xe-1823-5626fe5d6eeb0949727861375b27d67ee71feaa7: 5626fe5d6eeb0949727861375b27d67ee71feaa7
== Logs ==
For more details see: https://intel-gfx-ci.01.org/tree/intel-xe/IGTPW_11633/index.html