dt-bindings: input: touchscreen: edt-ft5x06: Use generic node name
Subsystems (3)
PATCH 1/1 dt-bindings: input: touchscreen: edt-ft5x06: Use generic node name
From: Fabio Estevam <[email protected]>
Node names should be generic.
Improve the binding example by using 'touchscreen' as the node name.
Signed-off-by Fabio Estevam <[email protected]>
--- .../devicetree/bindings/input/touchscreen/edt-ft5x06.yaml | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
Documentation/devicetree/bindings/input/touchscreen/edt-ft5x06.yaml +1 -1
@@ -126,7 +126,7 @@ examples: i2c { #address-cells = <1>; #size-cells = <0>; - edt-ft5x06@38 { + touchscreen@38 { compatible = "edt,edt-ft5406"; reg = <0x38>; interrupt-parent = <&gpio2>;
Signature · 1 line
2.34.1
Quoted 11 lines · Fabio Estevam
From: Fabio Estevam <[email protected]>
Node names should be generic.
Improve the binding example by using 'touchscreen' as the node name.
Signed-off-by Fabio Estevam <[email protected]>--- .../devicetree/bindings/input/touchscreen/edt-ft5x06.yaml | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
Could be squashed with the others...
Quoted 8 lines · Fabio Estevam
From: Fabio Estevam <[email protected]>
Node names should be generic.
Improve the binding example by using 'touchscreen' as the node name.
Signed-off-by Fabio Estevam <[email protected]>---
There are other files in touschscreen with the same issue. This is trivial, non-functional change so do not do it one file per patch. It's way too much churn. Fix everything or just don't touch.
Best regards,
Krzysztof