Skip to contentSkip to conversation

dt-bindings: input: touchscreen: edt-ft5x06: Use generic node name

PATCH In review Fabio Estevam 3 participants 3 messages Aug 29, 2024 – Sep 5, 2024

Subsystems (3)
lore
Share & tools
lore
#0 lore raw

PATCH 1/1 dt-bindings: input: touchscreen: edt-ft5x06: Use generic node name

From: Fabio Estevam <[email protected]>

Node names should be generic.

Improve the binding example by using 'touchscreen' as the node name.

---
 .../devicetree/bindings/input/touchscreen/edt-ft5x06.yaml       | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
Documentation/devicetree/bindings/input/touchscreen/edt-ft5x06.yaml +1 -1
index 51d48d4130d3..70a922e213f2 100644
@@ -126,7 +126,7 @@ examples:
     i2c {
       #address-cells = <1>;
       #size-cells = <0>;
-      edt-ft5x06@38 {
+      touchscreen@38 {
         compatible = "edt,edt-ft5406";
         reg = <0x38>;
         interrupt-parent = <&gpio2>;
Signature · 1 line
2.34.1
#2 lore raw
In reply to Fabio Estevam
Quoted 8 lines · Fabio Estevam

From: Fabio Estevam <[email protected]>

Node names should be generic.

Improve the binding example by using 'touchscreen' as the node name.

---

There are other files in touschscreen with the same issue. This is trivial, non-functional change so do not do it one file per patch. It's way too much churn. Fix everything or just don't touch.

Best regards,
Krzysztof