Simplify the UFS driver initialization code
Subsystems (2)
Bart Van Assche
reviewerv4 cover Simplify the UFS driver initialization code
Hi Martin,
This patch series addresses the following issues in the UFS driver initialization code:
* The legacy and MCQ scsi_add_host() calls occur in different functions. This patch series reduces the number of scsi_add_host() calls from two to one and hence makes the UFS driver easier to maintain.
* Two functions have a boolean 'init_dev_params' argument. This patch series removes that argument from both functions by splitting functions and by pushing some function calls from caller into callee.
Please consider this patch series for the next merge window.
Thanks,
Bart.
Changes compared to v3:
- Split patch "Move the MCQ scsi_add_host() call" into two patches to make it easier for reviewers.
Changes compared to v2:
- Improved several patch descriptions.
- Moved one source code comment.
Changes compared to v1:
- Fixed a compiler warning reported by the kernel build robot.
- Improved patch descriptions.
Bart Van Assche (10):
scsi: ufs: core: Introduce ufshcd_add_scsi_host()
scsi: ufs: core: Introduce ufshcd_activate_link()
scsi: ufs: core: Introduce ufshcd_post_device_init()
scsi: ufs: core: Call ufshcd_add_scsi_host() later
scsi: ufs: core: Move the ufshcd_device_init() call
scsi: ufs: core: Move the ufshcd_device_init(hba, true) call
scsi: ufs: core: Expand the ufshcd_device_init(hba, true) call
scsi: ufs: core: Move the MCQ scsi_add_host() call
scsi: ufs: core: Move code out of an if-statement
scsi: ufs: core: Remove the second argument of ufshcd_device_init()
drivers/ufs/core/ufshcd.c | 268 ++++++++++++++++++++++---------------- 1 file changed, 153 insertions(+), 115 deletions(-)
Bart Van Assche
reviewerPATCH v4 1/10 scsi: ufs: core: Introduce ufshcd_add_scsi_host()
Move the code for adding a SCSI host and also the code for managing TMF tags from ufshcd_init() into a new function called ufshcd_add_scsi_host(). This patch prepares for combining the two scsi_add_host() calls into a single call. No functionality has been changed.
--- drivers/ufs/core/ufshcd.c | 84 ++++++++++++++++++++++++--------------- 1 file changed, 53 insertions(+), 31 deletions(-)
drivers/ufs/core/ufshcd.c +53 -31
@@ -10357,6 +10357,56 @@ static const struct blk_mq_ops ufshcd_tmf_ops = { .queue_rq = ufshcd_queue_tmf, }; +static int ufshcd_add_scsi_host (struct ufs_hba *hba) +{ +int err; + +if (!is_mcq_supported (hba)) { + err =scsi_add_host (hba->host, hba->dev); +if (err) { +dev_err (hba->dev,"scsi_add_host failed\n" ); +return err; + } + hba->scsi_host_added = true; + } + + hba->tmf_tag_set = (struct blk_mq_tag_set ) { + .nr_hw_queues =1 , + .queue_depth = hba->nutmrs, + .ops = &ufshcd_tmf_ops, + .flags =BLK_MQ_F_NO_SCHED , + }; + err =blk_mq_alloc_tag_set (&hba->tmf_tag_set); +if (err <0 ) + goto remove_scsi_host; + hba->tmf_queue =blk_mq_alloc_queue (&hba->tmf_tag_set,NULL ,NULL ); +if (IS_ERR (hba->tmf_queue)) { + err =PTR_ERR (hba->tmf_queue); + goto free_tmf_tag_set; + } + hba->tmf_rqs =devm_kcalloc (hba->dev, hba->nutmrs, +sizeof (*hba->tmf_rqs),GFP_KERNEL ); +if (!hba->tmf_rqs) { + err = -ENOMEM ; + goto free_tmf_queue; + } + +return 0 ; + +free_tmf_queue: +blk_mq_destroy_queue (hba->tmf_queue); +blk_put_queue (hba->tmf_queue); + +free_tmf_tag_set: +blk_mq_free_tag_set (&hba->tmf_tag_set); + +remove_scsi_host: +if (hba->scsi_host_added) +scsi_remove_host (hba->host); + +return err; +} +/** * ufshcd_init - Driver initialization routine * @hba: per-adapter instance
@@ -10488,35 +10538,9 @@ int ufshcd_init(struct ufs_hba *hba, void __iomem *mmio_base, unsigned int irq) hba->is_irq_enabled = true; } -if (!is_mcq_supported (hba)) { - err =scsi_add_host (host, hba->dev); -if (err) { -dev_err (hba->dev,"scsi_add_host failed\n" ); - goto out_disable; - } - hba->scsi_host_added = true; - } - - hba->tmf_tag_set = (struct blk_mq_tag_set ) { - .nr_hw_queues =1 , - .queue_depth = hba->nutmrs, - .ops = &ufshcd_tmf_ops, - .flags =BLK_MQ_F_NO_SCHED , - }; - err =blk_mq_alloc_tag_set (&hba->tmf_tag_set); -if (err <0 ) - goto out_remove_scsi_host; - hba->tmf_queue =blk_mq_alloc_queue (&hba->tmf_tag_set,NULL ,NULL ); -if (IS_ERR (hba->tmf_queue)) { - err =PTR_ERR (hba->tmf_queue); - goto free_tmf_tag_set; - } - hba->tmf_rqs =devm_kcalloc (hba->dev, hba->nutmrs, -sizeof (*hba->tmf_rqs),GFP_KERNEL ); -if (!hba->tmf_rqs) { - err = -ENOMEM ; - goto free_tmf_queue; - } + err =ufshcd_add_scsi_host (hba); +if (err) + goto out_disable;/* Reset the attached device */ ufshcd_device_reset (hba);
@@ -10574,9 +10598,7 @@ int ufshcd_init(struct ufs_hba *hba, void __iomem *mmio_base, unsigned int irq) free_tmf_queue:blk_mq_destroy_queue (hba->tmf_queue);blk_put_queue (hba->tmf_queue); -free_tmf_tag_set:blk_mq_free_tag_set (&hba->tmf_tag_set); -out_remove_scsi_host:if (hba->scsi_host_added)scsi_remove_host (hba->host); out_disable:
Re: [PATCH v4 01/10] scsi: ufs: core: Introduce ufshcd_add_scsi_host()
Quoted 6 lines · Bart Van Assche
Move the code for adding a SCSI host and also the code for managing TMF tags from
ufshcd_init()into a new function calledufshcd_add_scsi_host(). This patch prepares for combining the twoscsi_add_host()calls into a single call. No functionality has been changed.
Thanks, Bao
Bart Van Assche
reviewerPATCH v4 2/10 scsi: ufs: core: Introduce ufshcd_activate_link()
In reply to Bart Van AsschePrepare for introducing a second caller by moving the code for activating the link between UFS controller and device into a new function. No functionality has been changed.
--- drivers/ufs/core/ufshcd.c | 15 +++++++++++++-- 1 file changed, 13 insertions(+), 2 deletions(-)
drivers/ufs/core/ufshcd.c +13 -2
@@ -8709,10 +8709,9 @@ static void ufshcd_config_mcq(struct ufs_hba *hba) hba->nutrs); } -static int ufshcd_device_init (struct ufs_hba *hba,bool init_dev_params) +static int ufshcd_activate_link (struct ufs_hba *hba) {int ret; -struct Scsi_Host *host = hba->host; hba->ufshcd_state =UFSHCD_STATE_RESET ;
@@ -8729,6 +8728,18 @@ static int ufshcd_device_init(struct ufs_hba *hba, bool init_dev_params)/* UniPro link is active now */ ufshcd_set_link_active (hba); +return 0 ; +} + +static int ufshcd_device_init (struct ufs_hba *hba,bool init_dev_params) +{ +struct Scsi_Host *host = hba->host; +int ret; + + ret =ufshcd_activate_link (hba); +if (ret) +return ret; +/* Reconfigure MCQ upon reset */ if (hba->mcq_enabled && !init_dev_params) {ufshcd_config_mcq (hba);
Re: [PATCH v4 02/10] scsi: ufs: core: Introduce ufshcd_activate_link()
Quoted 33 lines · Bart Van Assche
Prepare for introducing a second caller by moving the code for activating the link between UFS controller and device into a new function. No functionality has been changed.
Reviewed-by Avri Altman <[email protected]>Reviewed-by Manivannan Sadhasivam <[email protected]>Reviewed-by Bean Huo <[email protected]>Signed-off-by Bart Van Assche <[email protected]>--- drivers/ufs/core/ufshcd.c | 15 +++++++++++++-- 1 file changed, 13 insertions(+), 2 deletions(-)drivers/ufs/core/ufshcd.c +2
-2@@ -8709,10 +8709,9 @@ static void ufshcd_config_mcq(struct ufs_hba *hba) hba->nutrs); } -static int ufshcd_device_init (struct ufs_hba *hba,bool init_dev_params) +static int ufshcd_activate_link (struct ufs_hba *hba) {int ret; -struct Scsi_Host *host = hba->host; hba->ufshcd_state =UFSHCD_STATE_RESET ;@@ -8729,6 +8728,18 @@ static int ufshcd_device_init(struct ufs_hba *hba, bool init_dev_params)/* UniPro link is active now */ ufshcd_set_link_active (hba); +return 0 ;
drivers/ufs/core/ufshcd.c static int ufshcd_device_init(struct ufs_hba *hba, bool init_dev_params) · line 8741
Quoted 10 lines
drivers/ufs/core/ufshcd.c +10
-0+} + +static int ufshcd_device_init (struct ufs_hba *hba,bool init_dev_params) +{ +struct Scsi_Host *host = hba->host; +int ret; + + ret =ufshcd_activate_link (hba); +if (ret) +return ret;
Hi Bart,
There may be a problem in this patch.
In the original code, if UFSHCD_QUIRK_SKIP_PH_CONFIGURATION is set, ufshcd_device_init() would exit early. However, in this patch, if UFSHCD_QUIRK_SKIP_PH_CONFIGURATION is set, the new function ufshcd_activate_link() would return 0 which would cause the ufshcd_device_init() to continue further down. As a result, the ufshcd_device_init() would fail to handle the UFSHCD_QUIRK_SKIP_PH_CONFIGURATION flag as its original intention, right?
Thanks, Bao
Quoted 5 lines
drivers/ufs/core/ufshcd.c +1
-0+/* Reconfigure MCQ upon reset */ if (hba->mcq_enabled && !init_dev_params) {ufshcd_config_mcq (hba);
Bart Van Assche
reviewerRe: [PATCH v4 02/10] scsi: ufs: core: Introduce ufshcd_activate_link()
Quoted 1 line · Bao D. Nguyen
In the original code, if
UFSHCD_QUIRK_SKIP_PH_CONFIGURATIONis set,ufshcd_device_init()would exit early. However, in this patch, ifUFSHCD_QUIRK_SKIP_PH_CONFIGURATIONis set, the new functionufshcd_activate_link()would return 0 which would cause theufshcd_device_init()to continue further down. As a result, theufshcd_device_init()would fail to handle theUFSHCD_QUIRK_SKIP_PH_CONFIGURATIONflag as its original intention, right?
Hi Bao,
I was assuming that UFSHCD_STATE_RESET != 0 but apparently it is zero. I will fix this patch before I repost this patch series.
Thanks,
Bart.
Bart Van Assche
reviewerPATCH v4 3/10 scsi: ufs: core: Introduce ufshcd_post_device_init()
In reply to Bart Van AsschePrepare for introducing a second caller by moving more code from ufshcd_device_init() into a new function.
--- drivers/ufs/core/ufshcd.c | 63 ++++++++++++++++++++++----------------- 1 file changed, 36 insertions(+), 27 deletions(-)
drivers/ufs/core/ufshcd.c +36 -27
@@ -8731,6 +8731,41 @@ static int ufshcd_activate_link(struct ufs_hba *hba)return 0 ; } +static int ufshcd_post_device_init (struct ufs_hba *hba) +{ +int ret; + +ufshcd_tune_unipro_params (hba); + +/* UFS device is also active now */ +ufshcd_set_ufs_dev_active (hba); +ufshcd_force_reset_auto_bkops (hba); + +ufshcd_set_timestamp_attr (hba); +schedule_delayed_work (&hba->ufs_rtc_update_work, +msecs_to_jiffies (UFS_RTC_UPDATE_INTERVAL_MS )); + +if (!hba->max_pwr_info.is_valid) +return 0 ; + +/* +* Set the right value to bRefClkFreq before attempting to +* switch to HS gears. +*/ +if (hba->dev_ref_clk_freq !=REF_CLK_FREQ_INVAL ) +ufshcd_set_dev_ref_clk (hba); +/* Gear up to HS gear. */ + ret =ufshcd_config_pwr_mode (hba, &hba->max_pwr_info.info); +if (ret) { +dev_err (hba->dev, +"%s: Failed setting power mode, err = %d\n" , + __func__, ret); +return ret; + } + +return 0 ; +} +static int ufshcd_device_init (struct ufs_hba *hba,bool init_dev_params) {struct Scsi_Host *host = hba->host;
@@ -8789,33 +8824,7 @@ static int ufshcd_device_init(struct ufs_hba *hba, bool init_dev_params) } } -ufshcd_tune_unipro_params (hba); - -/* UFS device is also active now */ -ufshcd_set_ufs_dev_active (hba); -ufshcd_force_reset_auto_bkops (hba); - -ufshcd_set_timestamp_attr (hba); -schedule_delayed_work (&hba->ufs_rtc_update_work, -msecs_to_jiffies (UFS_RTC_UPDATE_INTERVAL_MS )); - -/* Gear up to HS gear if supported */ -if (hba->max_pwr_info.is_valid) { -/* -* Set the right value to bRefClkFreq before attempting to -* switch to HS gears. -*/ -if (hba->dev_ref_clk_freq !=REF_CLK_FREQ_INVAL ) -ufshcd_set_dev_ref_clk (hba); - ret =ufshcd_config_pwr_mode (hba, &hba->max_pwr_info.info); -if (ret) { -dev_err (hba->dev,"%s: Failed setting power mode, err = %d\n" , - __func__, ret); -return ret; - } - } - -return 0 ; +return ufshcd_post_device_init (hba); }/**
Re: [PATCH v4 03/10] scsi: ufs: core: Introduce ufshcd_post_device_init()
drivers/ufs/core/ufshcd.c static int ufshcd_activate_link(struct ufs_hba *hba) · line 8760
Quoted 3 lines · Bart Van Assche
drivers/ufs/core/ufshcd.c +3
-0+ ret =ufshcd_config_pwr_mode (hba, &hba->max_pwr_info.info); +if (ret) { + dev_err(hba->dev,
Nit picking. A line break here is not necessary. The original code fits the message fine.
drivers/ufs/core/ufshcd.c static int ufshcd_activate_link(struct ufs_hba *hba) · line 8764
Quoted 4 lines
drivers/ufs/core/ufshcd.c +4
-0+"%s: Failed setting power mode, err = %d\n" , + __func__, ret); +return ret; + }
Bart Van Assche
reviewerPATCH v4 4/10 scsi: ufs: core: Call ufshcd_add_scsi_host() later
In reply to Bart Van AsscheCall ufshcd_add_scsi_host() after host controller initialization has completed. This is possible because no code between the old and new ufshcd_add_scsi_host() call site depends on the scsi_add_host() call.
--- drivers/ufs/core/ufshcd.c | 16 +++++----------- 1 file changed, 5 insertions(+), 11 deletions(-)
drivers/ufs/core/ufshcd.c +5 -11
@@ -10558,10 +10558,6 @@ int ufshcd_init(struct ufs_hba *hba, void __iomem *mmio_base, unsigned int irq) hba->is_irq_enabled = true; } - err =ufshcd_add_scsi_host (hba); -if (err) - goto out_disable; -/* Reset the attached device */ ufshcd_device_reset (hba);
@@ -10573,7 +10569,7 @@ int ufshcd_init(struct ufs_hba *hba, void __iomem *mmio_base, unsigned int irq)dev_err (hba->dev,"Host controller enable failed\n" );ufshcd_print_evt_hist (hba);ufshcd_print_host_state (hba); - goto free_tmf_queue; + goto out_disable; }/*
@@ -10608,6 +10604,10 @@ int ufshcd_init(struct ufs_hba *hba, void __iomem *mmio_base, unsigned int irq)*/ ufshcd_set_ufs_dev_active (hba); + err =ufshcd_add_scsi_host (hba); +if (err) + goto out_disable; +async_schedule (ufshcd_async_scan, hba);ufs_sysfs_add_nodes (hba->dev);
@@ -10615,12 +10615,6 @@ int ufshcd_init(struct ufs_hba *hba, void __iomem *mmio_base, unsigned int irq)ufshcd_pm_qos_init (hba);return 0 ; -free_tmf_queue: -blk_mq_destroy_queue (hba->tmf_queue); -blk_put_queue (hba->tmf_queue); -blk_mq_free_tag_set (&hba->tmf_tag_set); -if (hba->scsi_host_added) -scsi_remove_host (hba->host); out_disable: hba->is_irq_enabled = false;ufshcd_hba_exit (hba);
Re: [PATCH v4 04/10] scsi: ufs: core: Call ufshcd_add_scsi_host() later
Quoted 7 lines · Bart Van Assche
Call
ufshcd_add_scsi_host()after host controller initialization has completed. This is possible because no code between the old and newufshcd_add_scsi_host()call site depends on thescsi_add_host()call.Reviewed-by Manivannan Sadhasivam <[email protected]>Reviewed-by Bean Huo <[email protected]>Signed-off-by Bart Van Assche <[email protected]>
Bart Van Assche
reviewerPATCH v4 5/10 scsi: ufs: core: Move the ufshcd_device_init() call
In reply to Bart Van AsscheMove the ufshcd_device_init() call to the ufshcd_probe_hba() callers and remove the 'init_dev_params' argument of ufshcd_probe_hba(). This change refactors the code without modifying the behavior of the UFSHCI driver. This change prepares for moving one ufshcd_device_init() call into ufshcd_init().
--- drivers/ufs/core/ufshcd.c | 25 +++++++++++++------------ 1 file changed, 13 insertions(+), 12 deletions(-)
drivers/ufs/core/ufshcd.c +13 -12
@@ -298,7 +298,8 @@ static int ufshcd_reset_and_restore(struct ufs_hba *hba);static int ufshcd_eh_host_reset_handler (struct scsi_cmnd *cmd);static int ufshcd_clear_tm_cmd (struct ufs_hba *hba,int tag);static void ufshcd_hba_exit (struct ufs_hba *hba); -static int ufshcd_probe_hba (struct ufs_hba *hba,bool init_dev_params); +static int ufshcd_device_init (struct ufs_hba *hba,bool init_dev_params); +static int ufshcd_probe_hba (struct ufs_hba *hba);static int ufshcd_setup_clocks (struct ufs_hba *hba,bool on);static inline void ufshcd_add_delay_before_dme_cmd (struct ufs_hba *hba);static int ufshcd_host_reset_and_restore (struct ufs_hba *hba);
@@ -7693,8 +7694,11 @@ static int ufshcd_host_reset_and_restore(struct ufs_hba *hba) err =ufshcd_hba_enable (hba);/* Establish the link again and restore the device */ -if (!err) - err =ufshcd_probe_hba (hba, false); +if (!err) { + err =ufshcd_device_init (hba,/*init_dev_params=*/ false); +if (!err) + err =ufshcd_probe_hba (hba); + }if (err)dev_err (hba->dev,"%s: Host init failed %d\n" , __func__, err);
@@ -8830,21 +8834,16 @@ static int ufshcd_device_init(struct ufs_hba *hba, bool init_dev_params)/** * ufshcd_probe_hba - probe hba to detect device and initialize it * @hba: per-adapter instance -* @init_dev_params: whether or not to call ufshcd_device_params_init(). * * Execute link-startup and verify device initialization * * Return: 0 upon success; < 0 upon failure. */ -static int ufshcd_probe_hba (struct ufs_hba *hba,bool init_dev_params) +static int ufshcd_probe_hba (struct ufs_hba *hba) {ktime_t start =ktime_get ();unsigned long flags; -int ret; - - ret =ufshcd_device_init (hba, init_dev_params); -if (ret) - goto out; +int ret =0 ;if (!hba->pm_op_in_progress && (hba->quirks &UFSHCD_QUIRK_REINIT_AFTER_MAX_GEAR_SWITCH )) {
@@ -8862,7 +8861,7 @@ static int ufshcd_probe_hba(struct ufs_hba *hba, bool init_dev_params) }/* Reinit the device */ - ret =ufshcd_device_init (hba, init_dev_params); + ret =ufshcd_device_init (hba,/*init_dev_params=*/ false);if (ret) goto out; }
@@ -8910,7 +8909,9 @@ static void ufshcd_async_scan(void *data, async_cookie_t cookie)down (&hba->host_sem);/* Initialize hba, detect and initialize UFS device */ - ret =ufshcd_probe_hba (hba, true); + ret =ufshcd_device_init (hba,/*init_dev_params=*/ true); +if (ret ==0 ) + ret =ufshcd_probe_hba (hba);up (&hba->host_sem);if (ret) goto out;
Re: [PATCH v4 05/10] scsi: ufs: core: Move the ufshcd_device_init() call
Quoted 26 lines · Bart Van Assche
Move the
ufshcd_device_init()call to theufshcd_probe_hba()callers and remove the 'init_dev_params' argument ofufshcd_probe_hba(). This change refactors the code without modifying the behavior of the UFSHCI driver. This change prepares for moving oneufshcd_device_init()call intoufshcd_init().Signed-off-by Bart Van Assche <[email protected]>--- drivers/ufs/core/ufshcd.c | 25 +++++++++++++------------ 1 file changed, 13 insertions(+), 12 deletions(-)drivers/ufs/core/ufshcd.c +2
-1@@ -298,7 +298,8 @@ static int ufshcd_reset_and_restore(struct ufs_hba *hba);static int ufshcd_eh_host_reset_handler (struct scsi_cmnd *cmd);static int ufshcd_clear_tm_cmd (struct ufs_hba *hba,int tag);static void ufshcd_hba_exit (struct ufs_hba *hba); -static int ufshcd_probe_hba (struct ufs_hba *hba,bool init_dev_params); +static int ufshcd_device_init (struct ufs_hba *hba,bool init_dev_params); +static int ufshcd_probe_hba (struct ufs_hba *hba);static int ufshcd_setup_clocks (struct ufs_hba *hba,bool on);static inline void ufshcd_add_delay_before_dme_cmd (struct ufs_hba *hba);static int ufshcd_host_reset_and_restore (struct ufs_hba *hba);
drivers/ufs/core/ufshcd.c static int ufshcd_host_reset_and_restore(struct ufs_hba *hba) · line 7697
Quoted 5 lines
drivers/ufs/core/ufshcd.c +0
-2@@ -7693,8 +7694,11 @@ static int ufshcd_host_reset_and_restore(struct ufs_hba *hba) err =ufshcd_hba_enable (hba);/* Establish the link again and restore the device */ -if (!err) - err =ufshcd_probe_hba (hba, false);
In the original code, if ufshcd_probe_hba()->ufshcd_device_init() fails, the hba->ufshcd_state is updated to UFSHCD_STATE_ERROR;
drivers/ufs/core/ufshcd.c static int ufshcd_host_reset_and_restore(struct ufs_hba *hba) · line 7698
Quoted 2 lines
drivers/ufs/core/ufshcd.c +2
-0+if (!err) { + err =ufshcd_device_init (hba,/*init_dev_params=*/ false);
Calling ufshcd_device_init() here changes the behavior of the code slightly. If the ufshcd_device_init() fails, it exits without updating the hba->ufshcd_state to UFSHCD_STATE_ERROR.
Quoted 31 lines
drivers/ufs/core/ufshcd.c +5
-7+if (!err) + err =ufshcd_probe_hba (hba); + }if (err)dev_err (hba->dev,"%s: Host init failed %d\n" , __func__, err);@@ -8830,21 +8834,16 @@ static int ufshcd_device_init(struct ufs_hba *hba, bool init_dev_params)/** * ufshcd_probe_hba - probe hba to detect device and initialize it * @hba: per-adapter instance -* @init_dev_params: whether or not to call ufshcd_device_params_init(). * * Execute link-startup and verify device initialization * * Return: 0 upon success; < 0 upon failure. */ -static int ufshcd_probe_hba (struct ufs_hba *hba,bool init_dev_params) +static int ufshcd_probe_hba (struct ufs_hba *hba) {ktime_t start =ktime_get ();unsigned long flags; -int ret; - - ret =ufshcd_device_init (hba, init_dev_params); -if (ret) - goto out; +int ret =0 ;if (!hba->pm_op_in_progress && (hba->quirks &UFSHCD_QUIRK_REINIT_AFTER_MAX_GEAR_SWITCH )) {
drivers/ufs/core/ufshcd.c static int ufshcd_probe_hba(struct ufs_hba *hba, bool init_dev_params) · line 8864
Quoted 5 lines
drivers/ufs/core/ufshcd.c +1
-1@@ -8862,7 +8861,7 @@ static int ufshcd_probe_hba(struct ufs_hba *hba, bool init_dev_params) }/* Reinit the device */ - ret =ufshcd_device_init (hba, init_dev_params); + ret =ufshcd_device_init (hba,/*init_dev_params=*/ false);
Originally, the ufshcd_async_scan()->ufshcd_probe_hba() has the init_dev_params = true. However the init_dev_params is updated to false here for the ufshcd_async_scan()->ufshcd_probe_hba() path.
drivers/ufs/core/ufshcd.c static void ufshcd_async_scan(void *data, async_cookie_t cookie) · line 8912
Quoted 9 lines
drivers/ufs/core/ufshcd.c +1
-1if (ret) goto out; }@@ -8910,7 +8909,9 @@ static void ufshcd_async_scan(void *data, async_cookie_t cookie)down (&hba->host_sem);/* Initialize hba, detect and initialize UFS device */ - ret =ufshcd_probe_hba (hba, true); + ret =ufshcd_device_init (hba,/*init_dev_params=*/ true);
Same issue as mentioned earlier. If ufshcd_device_init() fails here, the hba->ufshcd_state is not updated to UFSHCD_STATE_ERROR. Compared to the original ufshcd_probe_hba()->ufshcd_device_init() failure would update hba->ufshcd_state.
Thanks, Bao
Quoted 6 lines
drivers/ufs/core/ufshcd.c +2
-0+if (ret ==0 ) + ret =ufshcd_probe_hba (hba);up (&hba->host_sem);if (ret) goto out;
Bart Van Assche
reviewerPATCH v4 6/10 scsi: ufs: core: Move the ufshcd_device_init(hba, true) call
In reply to Bart Van AsscheMove the ufshcd_device_init(hba, true) call from ufshcd_async_scan() into ufshcd_init(). This patch prepares for moving both scsi_add_host() calls into ufshcd_add_scsi_host(). Calling ufshcd_device_init() from ufshcd_init() without holding hba->host_sem is safe. This is safe because hba->host_sem serializes core code and sysfs callbacks. The ufshcd_device_init() call is moved before the scsi_add_host() call and hence happens before any SCSI sysfs attributes are created.
--- drivers/ufs/core/ufshcd.c | 9 +++++---- 1 file changed, 5 insertions(+), 4 deletions(-)
drivers/ufs/core/ufshcd.c +5 -4
@@ -8908,10 +8908,7 @@ static void ufshcd_async_scan(void *data, async_cookie_t cookie)int ret;down (&hba->host_sem); -/* Initialize hba, detect and initialize UFS device */ - ret =ufshcd_device_init (hba,/*init_dev_params=*/ true); -if (ret ==0 ) - ret =ufshcd_probe_hba (hba); + ret =ufshcd_probe_hba (hba);up (&hba->host_sem);if (ret) goto out;
@@ -10605,6 +10602,10 @@ int ufshcd_init(struct ufs_hba *hba, void __iomem *mmio_base, unsigned int irq)*/ ufshcd_set_ufs_dev_active (hba); + err =ufshcd_device_init (hba,/*init_dev_params=*/ true); +if (err) + goto out_disable; + err =ufshcd_add_scsi_host (hba);if (err) goto out_disable;
Re: [PATCH v4 06/10] scsi: ufs: core: Move the ufshcd_device_init(hba, true) call
Quoted 30 lines · Bart Van Assche
Move the
ufshcd_device_init(hba, true)call fromufshcd_async_scan()intoufshcd_init(). This patch prepares for moving bothscsi_add_host()calls intoufshcd_add_scsi_host(). Callingufshcd_device_init()fromufshcd_init()without holdinghba->host_semis safe. This is safe becausehba->host_semserializes core code and sysfs callbacks. Theufshcd_device_init()call is moved before thescsi_add_host()call and hence happens before any SCSI sysfs attributes are created.Signed-off-by Bart Van Assche <[email protected]>--- drivers/ufs/core/ufshcd.c | 9 +++++---- 1 file changed, 5 insertions(+), 4 deletions(-)drivers/ufs/core/ufshcd.c +1
-4@@ -8908,10 +8908,7 @@ static void ufshcd_async_scan(void *data, async_cookie_t cookie)int ret;down (&hba->host_sem); -/* Initialize hba, detect and initialize UFS device */ - ret =ufshcd_device_init (hba,/*init_dev_params=*/ true); -if (ret ==0 ) - ret =ufshcd_probe_hba (hba); + ret =ufshcd_probe_hba (hba);up (&hba->host_sem);if (ret) goto out;
drivers/ufs/core/ufshcd.c int ufshcd_init(struct ufs_hba *hba, void __iomem *mmio_base, unsigned int irq) · line 10608
Quoted 7 lines
drivers/ufs/core/ufshcd.c +4
-0@@ -10605,6 +10602,10 @@ int ufshcd_init(struct ufs_hba *hba, void __iomem *mmio_base, unsigned int irq)*/ ufshcd_set_ufs_dev_active (hba); + err =ufshcd_device_init (hba,/*init_dev_params=*/ true); +if (err) + goto out_disable; +
In SDB mode, the order of execution for these two functions changed by this patch. In the original code, the scsi_add_host() happens first, then the code within ufshcd_post_device_init(). Here it is the opposite. However, it seems the order can be swapped without any issue.
Quoted 4 lines
drivers/ufs/core/ufshcd.c +0
-0err =ufshcd_add_scsi_host (hba);if (err) goto out_disable;
Bart Van Assche
reviewerPATCH v4 7/10 scsi: ufs: core: Expand the ufshcd_device_init(hba, true) call
In reply to Bart Van AsscheExpand the ufshcd_device_init(hba, true) call and remove all code that depends on init_dev_params == false. This change prepares for combining the two scsi_add_host() calls.
--- drivers/ufs/core/ufshcd.c | 43 ++++++++++++++++++++++++++++++++++++++- 1 file changed, 42 insertions(+), 1 deletion(-)
drivers/ufs/core/ufshcd.c +42 -1
@@ -10602,7 +10602,48 @@ int ufshcd_init(struct ufs_hba *hba, void __iomem *mmio_base, unsigned int irq)*/ ufshcd_set_ufs_dev_active (hba); - err =ufshcd_device_init (hba,/*init_dev_params=*/ true); + err =ufshcd_activate_link (hba); +if (err) + goto out_disable; + +/* Verify device initialization by sending NOP OUT UPIU. */ + err =ufshcd_verify_dev_init (hba); +if (err) + goto out_disable; + +/* Initiate UFS initialization and waiting for completion. */ + err =ufshcd_complete_dev_init (hba); +if (err) + goto out_disable; + +/* +* Initialize UFS device parameters used by driver, these +* parameters are associated with UFS descriptors. +*/ + err =ufshcd_device_params_init (hba); +if (err) + goto out_disable; +if (is_mcq_supported (hba)) { +ufshcd_mcq_enable (hba); + err =ufshcd_alloc_mcq (hba); +if (!err) { +ufshcd_config_mcq (hba); + }else { +/* Continue with SDB mode */ +ufshcd_mcq_disable (hba); + use_mcq_mode = false; +dev_err (hba->dev,"MCQ mode is disabled, err=%d\n" , + err); + } + err =scsi_add_host (host, hba->dev); +if (err) { +dev_err (hba->dev,"scsi_add_host failed\n" ); + goto out_disable; + } + hba->scsi_host_added = true; + } + + err =ufshcd_post_device_init (hba);if (err) goto out_disable;
Re: [PATCH v4 07/10] scsi: ufs: core: Expand the ufshcd_device_init(hba, true) call
Quoted 38 lines · Bart Van Assche
Expand the
ufshcd_device_init(hba, true)call and remove all code that depends oninit_dev_params== false. This change prepares for combining the twoscsi_add_host()calls.Signed-off-by Bart Van Assche <[email protected]>--- drivers/ufs/core/ufshcd.c | 43 ++++++++++++++++++++++++++++++++++++++- 1 file changed, 42 insertions(+), 1 deletion(-)drivers/ufs/core/ufshcd.c +20
-1@@ -10602,7 +10602,48 @@ int ufshcd_init(struct ufs_hba *hba, void __iomem *mmio_base, unsigned int irq)*/ ufshcd_set_ufs_dev_active (hba); - err =ufshcd_device_init (hba,/*init_dev_params=*/ true); + err =ufshcd_activate_link (hba); +if (err) + goto out_disable; + +/* Verify device initialization by sending NOP OUT UPIU. */ + err =ufshcd_verify_dev_init (hba); +if (err) + goto out_disable; + +/* Initiate UFS initialization and waiting for completion. */ + err =ufshcd_complete_dev_init (hba); +if (err) + goto out_disable; + +/* +* Initialize UFS device parameters used by driver, these +* parameters are associated with UFS descriptors. +*/ + err =ufshcd_device_params_init (hba); +if (err)
drivers/ufs/core/ufshcd.c int ufshcd_init(struct ufs_hba *hba, void __iomem *mmio_base, unsigned int irq) · line 10634
Quoted 10 lines
drivers/ufs/core/ufshcd.c +10
-0+ goto out_disable; +if (is_mcq_supported (hba)) { +ufshcd_mcq_enable (hba); + err =ufshcd_alloc_mcq (hba); +if (!err) { +ufshcd_config_mcq (hba); + }else { +/* Continue with SDB mode */ +ufshcd_mcq_disable (hba); + use_mcq_mode = false;
If ufshcd_alloc_mcq() fails here, sdb mode is used. The scsi_add_host() is also called for sdb mode. Later on, when the ufshcd_add_scsi_host() function is called, we will call scsi_add_host() again for sdb mode. Therefore, scsi_add_host() would be called twice.
Quoted 16 lines
drivers/ufs/core/ufshcd.c +12
-0+dev_err (hba->dev,"MCQ mode is disabled, err=%d\n" , + err); + } + err =scsi_add_host (host, hba->dev); +if (err) { +dev_err (hba->dev,"scsi_add_host failed\n" ); + goto out_disable; + } + hba->scsi_host_added = true; + } + + err =ufshcd_post_device_init (hba);if (err) goto out_disable;
Bart Van Assche
reviewerPATCH v4 8/10 scsi: ufs: core: Move the MCQ scsi_add_host() call
In reply to Bart Van AsscheWhether or not MCQ is used, call scsi_add_host from ufshcd_add_scsi_host(). For MCQ this patch swaps the order of the scsi_add_host() and ufshcd_post_device_init() calls. This patch also prepares for moving both scsi_add_host() calls into ufshcd_add_scsi_host().
--- drivers/ufs/core/ufshcd.c | 39 +++++++++++++++++++-------------------- 1 file changed, 19 insertions(+), 20 deletions(-)
drivers/ufs/core/ufshcd.c +19 -20
@@ -10379,7 +10379,25 @@ static int ufshcd_add_scsi_host(struct ufs_hba *hba) {int err; -if (!is_mcq_supported (hba)) { +if (is_mcq_supported (hba)) { +ufshcd_mcq_enable (hba); + err =ufshcd_alloc_mcq (hba); +if (!err) { +ufshcd_config_mcq (hba); + }else { +/* Continue with SDB mode */ +ufshcd_mcq_disable (hba); + use_mcq_mode = false; +dev_err (hba->dev,"MCQ mode is disabled, err=%d\n" , + err); + } + err =scsi_add_host (hba->host, hba->dev); +if (err) { +dev_err (hba->dev,"scsi_add_host failed\n" ); +return err; + } + hba->scsi_host_added = true; + }else { err =scsi_add_host (hba->host, hba->dev);if (err) {dev_err (hba->dev,"scsi_add_host failed\n" );
@@ -10623,25 +10641,6 @@ int ufshcd_init(struct ufs_hba *hba, void __iomem *mmio_base, unsigned int irq) err =ufshcd_device_params_init (hba);if (err) goto out_disable; -if (is_mcq_supported (hba)) { -ufshcd_mcq_enable (hba); - err =ufshcd_alloc_mcq (hba); -if (!err) { -ufshcd_config_mcq (hba); - }else { -/* Continue with SDB mode */ -ufshcd_mcq_disable (hba); - use_mcq_mode = false; -dev_err (hba->dev,"MCQ mode is disabled, err=%d\n" , - err); - } - err =scsi_add_host (host, hba->dev); -if (err) { -dev_err (hba->dev,"scsi_add_host failed\n" ); - goto out_disable; - } - hba->scsi_host_added = true; - } err =ufshcd_post_device_init (hba);if (err)
Re: [PATCH v4 08/10] scsi: ufs: core: Move the MCQ scsi_add_host() call
Quoted 4 lines · Bart Van Assche
Whether or not MCQ is used, call
scsi_add_hostfromufshcd_add_scsi_host(). For MCQ this patch swaps the order of thescsi_add_host()andufshcd_post_device_init()calls. This patch also prepares for moving bothscsi_add_host()calls intoufshcd_add_scsi_host().
This patch fixes the issue about scsi_add_host() being called twice introduced in patch #7. It also acknowledged the order swap I mentioned in patch #6.
Quoted 64 lines
Signed-off-by Bart Van Assche <[email protected]>--- drivers/ufs/core/ufshcd.c | 39 +++++++++++++++++++-------------------- 1 file changed, 19 insertions(+), 20 deletions(-)drivers/ufs/core/ufshcd.c +19
-20@@ -10379,7 +10379,25 @@ static int ufshcd_add_scsi_host(struct ufs_hba *hba) {int err; -if (!is_mcq_supported (hba)) { +if (is_mcq_supported (hba)) { +ufshcd_mcq_enable (hba); + err =ufshcd_alloc_mcq (hba); +if (!err) { +ufshcd_config_mcq (hba); + }else { +/* Continue with SDB mode */ +ufshcd_mcq_disable (hba); + use_mcq_mode = false; +dev_err (hba->dev,"MCQ mode is disabled, err=%d\n" , + err); + } + err =scsi_add_host (hba->host, hba->dev); +if (err) { +dev_err (hba->dev,"scsi_add_host failed\n" ); +return err; + } + hba->scsi_host_added = true; + }else { err =scsi_add_host (hba->host, hba->dev);if (err) {dev_err (hba->dev,"scsi_add_host failed\n" );@@ -10623,25 +10641,6 @@ int ufshcd_init(struct ufs_hba *hba, void __iomem *mmio_base, unsigned int irq) err =ufshcd_device_params_init (hba);if (err) goto out_disable; -if (is_mcq_supported (hba)) { -ufshcd_mcq_enable (hba); - err =ufshcd_alloc_mcq (hba); -if (!err) { -ufshcd_config_mcq (hba); - }else { -/* Continue with SDB mode */ -ufshcd_mcq_disable (hba); - use_mcq_mode = false; -dev_err (hba->dev,"MCQ mode is disabled, err=%d\n" , - err); - } - err =scsi_add_host (host, hba->dev); -if (err) { -dev_err (hba->dev,"scsi_add_host failed\n" ); - goto out_disable; - } - hba->scsi_host_added = true; - } err =ufshcd_post_device_init (hba);if (err)
Bart Van Assche
reviewerPATCH v4 9/10 scsi: ufs: core: Move code out of an if-statement
In reply to Bart Van AsscheThe previous patch in this series introduced identical code in both branches of an if-statement. Move that code outside the if-statement.
--- drivers/ufs/core/ufshcd.c | 20 +++++++------------- 1 file changed, 7 insertions(+), 13 deletions(-)
drivers/ufs/core/ufshcd.c +7 -13
@@ -10391,21 +10391,15 @@ static int ufshcd_add_scsi_host(struct ufs_hba *hba)dev_err (hba->dev,"MCQ mode is disabled, err=%d\n" , err); } - err =scsi_add_host (hba->host, hba->dev); -if (err) { -dev_err (hba->dev,"scsi_add_host failed\n" ); -return err; - } - hba->scsi_host_added = true; - }else { - err =scsi_add_host (hba->host, hba->dev); -if (err) { -dev_err (hba->dev,"scsi_add_host failed\n" ); -return err; - } - hba->scsi_host_added = true; } + err =scsi_add_host (hba->host, hba->dev); +if (err) { +dev_err (hba->dev,"scsi_add_host failed\n" ); +return err; + } + hba->scsi_host_added = true; + hba->tmf_tag_set = (struct blk_mq_tag_set ) { .nr_hw_queues =1 , .queue_depth = hba->nutmrs,
Re: [PATCH v4 09/10] scsi: ufs: core: Move code out of an if-statement
Quoted 4 lines · Bart Van Assche
The previous patch in this series introduced identical code in both branches of an if-statement. Move that code outside the if-statement.
Signed-off-by Bart Van Assche <[email protected]>
Bart Van Assche
reviewerPATCH v4 10/10 scsi: ufs: core: Remove the second argument of ufshcd_device_init()
In reply to Bart Van AsscheBoth ufshcd_device_init() callers pass 'false' as second argument. Hence, remove that second argument.
--- drivers/ufs/core/ufshcd.c | 44 +++++---------------------------------- 1 file changed, 5 insertions(+), 39 deletions(-)
drivers/ufs/core/ufshcd.c +5 -39
@@ -298,7 +298,7 @@ static int ufshcd_reset_and_restore(struct ufs_hba *hba);static int ufshcd_eh_host_reset_handler (struct scsi_cmnd *cmd);static int ufshcd_clear_tm_cmd (struct ufs_hba *hba,int tag);static void ufshcd_hba_exit (struct ufs_hba *hba); -static int ufshcd_device_init (struct ufs_hba *hba,bool init_dev_params); +static int ufshcd_device_init (struct ufs_hba *hba);static int ufshcd_probe_hba (struct ufs_hba *hba);static int ufshcd_setup_clocks (struct ufs_hba *hba,bool on);static inline void ufshcd_add_delay_before_dme_cmd (struct ufs_hba *hba);
@@ -7695,7 +7695,7 @@ static int ufshcd_host_reset_and_restore(struct ufs_hba *hba)/* Establish the link again and restore the device */ if (!err) { - err =ufshcd_device_init (hba,/*init_dev_params=*/ false); + err =ufshcd_device_init (hba);if (!err) err =ufshcd_probe_hba (hba); }
@@ -8770,9 +8770,8 @@ static int ufshcd_post_device_init(struct ufs_hba *hba)return 0 ; } -static int ufshcd_device_init (struct ufs_hba *hba,bool init_dev_params) +static int ufshcd_device_init (struct ufs_hba *hba) { -struct Scsi_Host *host = hba->host;int ret; ret =ufshcd_activate_link (hba);
@@ -8780,7 +8779,7 @@ static int ufshcd_device_init(struct ufs_hba *hba, bool init_dev_params)return ret;/* Reconfigure MCQ upon reset */ -if (hba->mcq_enabled && !init_dev_params) { +if (hba->mcq_enabled) {ufshcd_config_mcq (hba);ufshcd_mcq_enable (hba); }
@@ -8795,39 +8794,6 @@ static int ufshcd_device_init(struct ufs_hba *hba, bool init_dev_params)if (ret)return ret; -/* -* Initialize UFS device parameters used by driver, these -* parameters are associated with UFS descriptors. -*/ -if (init_dev_params) { - ret =ufshcd_device_params_init (hba); -if (ret) -return ret; -if (is_mcq_supported (hba) && !hba->scsi_host_added) { -ufshcd_mcq_enable (hba); - ret =ufshcd_alloc_mcq (hba); -if (!ret) { -ufshcd_config_mcq (hba); - }else { -/* Continue with SDB mode */ -ufshcd_mcq_disable (hba); - use_mcq_mode = false; -dev_err (hba->dev,"MCQ mode is disabled, err=%d\n" , - ret); - } - ret =scsi_add_host (host, hba->dev); -if (ret) { -dev_err (hba->dev,"scsi_add_host failed\n" ); -return ret; - } - hba->scsi_host_added = true; - }else if (is_mcq_supported (hba)) { -/* UFSHCD_QUIRK_REINIT_AFTER_MAX_GEAR_SWITCH is set */ -ufshcd_config_mcq (hba); -ufshcd_mcq_enable (hba); - } - } -return ufshcd_post_device_init (hba); }
@@ -8861,7 +8827,7 @@ static int ufshcd_probe_hba(struct ufs_hba *hba) }/* Reinit the device */ - ret =ufshcd_device_init (hba,/*init_dev_params=*/ false); + ret =ufshcd_device_init (hba);if (ret) goto out; }