Skip to contentSkip to conversation

mfd: twl: Add clock for TWL6030

PATCH Superseded Andreas Kemnade 2 participants 7 messages Oct 2, 2024

Subsystems (3)

v2 of 5 Superseded Latest is v5 →

lore
Share & tools
lore

Andreas Kemnade

author maintainer
#0 lore raw

v2 cover mfd: twl: Add clock for TWL6030

Previously the clock support for only implemented for TWL6032 so add it also for the TWL6030. There are devices out there where especially WLAN only works if these clocks are enabled by some patched U-Boot. This allows to explicitly specify the clock requirements.

Andreas Kemnade (3):
mfd: twl-core: Add a clock subdevice for the TWL6030
clk: twl: remove is_prepared
clk: twl: add TWL6030 support

 drivers/clk/Kconfig    |  2 +-
 drivers/clk/clk-twl.c  | 71 +++++++++++++++++++++++++-----------------
 drivers/mfd/twl-core.c | 32 +++++++++++++------
 3 files changed, 65 insertions(+), 40 deletions(-)
Signature · 1 line
2.39.5
author maintainer
#1 lore raw

PATCH v2 1/3 mfd: twl-core: Add a clock subdevice for the TWL6030

Also the TWL6030 has some clocks, so add a subdevice for that.

---
 drivers/mfd/twl-core.c | 32 ++++++++++++++++++++++----------
 1 file changed, 22 insertions(+), 10 deletions(-)
drivers/mfd/twl-core.c +22 -10
index c130ffef182f..c981922f62d5 100644
@@ -711,6 +711,10 @@ static struct of_dev_auxdata twl_auxdata_lookup[] = {
 	{ /* sentinel */ },
 };
 
+static const struct mfd_cell twl6030_cells[] = {
+	{ .name = "twl6030-clk" },
+};
+
 static const struct mfd_cell twl6032_cells[] = {
 	{ .name = "twl6032-clk" },
 };
@@ -861,17 +865,25 @@ twl_probe(struct i2c_client *client)
 				 TWL4030_DCDC_GLOBAL_CFG);
 	}
 
-	if (id->driver_data == (TWL6030_CLASS | TWL6032_SUBCLASS)) {
-		status = devm_mfd_add_devices(&client->dev,
-					      PLATFORM_DEVID_NONE,
-					      twl6032_cells,
-					      ARRAY_SIZE(twl6032_cells),
-					      NULL, 0, NULL);
-		if (status < 0)
-			goto free;
-	}
-
 	if (twl_class_is_6030()) {
+		if (id->driver_data & TWL6032_SUBCLASS) {
+			status = devm_mfd_add_devices(&client->dev,
+						      PLATFORM_DEVID_NONE,
+						      twl6032_cells,
+						      ARRAY_SIZE(twl6032_cells),
+						      NULL, 0, NULL);
+			if (status < 0)
+				goto free;
+		} else {
+			status = devm_mfd_add_devices(&client->dev,
+						      PLATFORM_DEVID_NONE,
+						      twl6030_cells,
+						      ARRAY_SIZE(twl6030_cells),
+						      NULL, 0, NULL);
+			if (status < 0)
+				goto free;
+		}
+
 		if (of_device_is_system_power_controller(node)) {
 			if (!pm_power_off)
 				pm_power_off = twl6030_power_off;
Signature · 1 line
2.39.5
author maintainer
#2 lore raw

PATCH v2 2/3 clk: twl: remove is_prepared

In reply to Andreas Kemnade

Remave is_prepared to simplify adding of TWL6030 support. The default implementation should be enough.

---
 drivers/clk/clk-twl.c | 17 -----------------
 1 file changed, 17 deletions(-)
drivers/clk/clk-twl.c +0 -17
index eab9d3c8ed8a..1d684b358401 100644
@@ -77,26 +77,9 @@ static void twl6032_clks_unprepare(struct clk_hw *hw)
 		dev_err(cinfo->dev, "clk unprepare failed\n");
 }
 
-static int twl6032_clks_is_prepared(struct clk_hw *hw)
-{
-	struct twl_clock_info *cinfo = to_twl_clks_info(hw);
-	int val;
-
-	val = twlclk_read(cinfo, TWL_MODULE_PM_RECEIVER, VREG_STATE);
-	if (val < 0) {
-		dev_err(cinfo->dev, "clk read failed\n");
-		return val;
-	}
-
-	val &= TWL6030_CFG_STATE_MASK;
-
-	return val == TWL6030_CFG_STATE_ON;
-}
-
 static const struct clk_ops twl6032_clks_ops = {
 	.prepare	= twl6032_clks_prepare,
 	.unprepare	= twl6032_clks_unprepare,
-	.is_prepared	= twl6032_clks_is_prepared,
 	.recalc_rate	= twl_clks_recalc_rate,
 };
 
Signature · 1 line
2.39.5
author maintainer
#4 lore raw

PATCH v2 3/3 clk: twl: add TWL6030 support

In reply to Andreas Kemnade

The TWL6030 has similar clocks, so add support for it. Take care of the resource grouping handling needed.

---
 drivers/clk/Kconfig   |  2 +-
 drivers/clk/clk-twl.c | 54 +++++++++++++++++++++++++++++++++----------
 2 files changed, 43 insertions(+), 13 deletions(-)
drivers/clk/Kconfig +1 -1
index 299bc678ed1b..82ec12f9b82c 100644
@@ -291,7 +291,7 @@ config CLK_TWL
 	help
 	  Enable support for controlling the clock resources on TWL family
 	  PMICs. These devices have some 32K clock outputs which can be
-	  controlled by software. For now, only the TWL6032 clocks are
+	  controlled by software. For now, the TWL6032 and TWL6030 clocks are
 	  supported.
 
 config CLK_TWL6040
drivers/clk/clk-twl.c +42 -12

93 lines not on this page · raw message

Signature · 1 line
2.39.5
maintainer
#5 lore raw

Re: [PATCH v2 3/3] clk: twl: add TWL6030 support

Quoted 38 lines · Andreas Kemnade

The TWL6030 has similar clocks, so add support for it. Take care of the resource grouping handling needed.

---
 drivers/clk/Kconfig   |  2 +-
 drivers/clk/clk-twl.c | 54 +++++++++++++++++++++++++++++++++----------
 2 files changed, 43 insertions(+), 13 deletions(-)
drivers/clk/Kconfig +1 -1
index 299bc678ed1b..82ec12f9b82c 100644
@@ -291,7 +291,7 @@ config CLK_TWL
 	help
 	  Enable support for controlling the clock resources on TWL family
 	  PMICs. These devices have some 32K clock outputs which can be
-	  controlled by software. For now, only the TWL6032 clocks are
+	  controlled by software. For now, the TWL6032 and TWL6030 clocks are
 	  supported.
 
 config CLK_TWL6040
drivers/clk/clk-twl.c +4 -1
index 1d684b358401..f3a52f568887 100644
@@ -11,13 +11,26 @@
 #include <linux/platform_device.h>
 #include <linux/slab.h>
 
-#define VREG_STATE              2
+#define VREG_STATE		2
+#define VREG_GRP		0
 #define TWL6030_CFG_STATE_OFF   0x00
 #define TWL6030_CFG_STATE_ON    0x01
 #define TWL6030_CFG_STATE_MASK  0x03
+#define TWL6030_CFG_STATE_GRP_SHIFT	5
+#define TWL6030_CFG_STATE_APP_SHIFT	2

drivers/clk/clk-twl.c line 30

Quoted 10 lines
drivers/clk/clk-twl.c +10 -0
+#define TWL6030_CFG_STATE_APP_MASK	(0x03 << TWL6030_CFG_STATE_APP_SHIFT)
+#define TWL6030_CFG_STATE_APP(v)	(((v) & TWL6030_CFG_STATE_APP_MASK) >>\
+						TWL6030_CFG_STATE_APP_SHIFT)
+#define P1_GRP BIT(0) /* processor power group */
+#define P2_GRP BIT(1)
+#define P3_GRP BIT(2)
+#define ALL_GRP (P1_GRP | P2_GRP | P3_GRP)
+
+#define DRIVER_DATA_TWL6030 0
+#define DRIVER_DATA_TWL6032 1

how about using enum here?

enum twl_type {
	TWL_TYPE_6030,
	TWL_TYPE_6032,
};

drivers/clk/clk-twl.c line 33

Quoted 4 lines
drivers/clk/clk-twl.c +1 -1
 struct twl_clock_info {
-	struct device *dev;
+	struct platform_device *pdev;

I wouldn't change this.
Instead, you can add twl_type member here and initialize it in probe.

	enum twl_type type;
Quoted 4 lines
drivers/clk/clk-twl.c +0 -0
 	u8 base;
 	struct clk_hw hw;
 };

drivers/clk/clk-twl.c static unsigned long twl_clks_recalc_rate(struct clk_hw *hw, · line 73

Quoted 10 lines
drivers/clk/clk-twl.c +1 -5
@@ -56,14 +69,21 @@ static unsigned long twl_clks_recalc_rate(struct clk_hw *hw,
 static int twl6032_clks_prepare(struct clk_hw *hw)
 {
 	struct twl_clock_info *cinfo = to_twl_clks_info(hw);
-	int ret;
 
-	ret = twlclk_write(cinfo, TWL_MODULE_PM_RECEIVER, VREG_STATE,
-			   TWL6030_CFG_STATE_ON);
-	if (ret < 0)
-		dev_err(cinfo->dev, "clk prepare failed\n");
+	if (platform_get_device_id(cinfo->pdev)->driver_data == DRIVER_DATA_TWL6030) {

this changes to

	if (cinfo->type == TWL_TYPE_6030)
Quoted 18 lines
drivers/clk/clk-twl.c +12 -1
+		int grp;
 
-	return ret;
+		grp = twlclk_read(cinfo, TWL_MODULE_PM_RECEIVER, VREG_GRP);
+		if (grp < 0)
+			return grp;
+
+		return twlclk_write(cinfo, TWL_MODULE_PM_RECEIVER, VREG_STATE,
+				    grp << TWL6030_CFG_STATE_GRP_SHIFT |
+				    TWL6030_CFG_STATE_ON);
+	}
+
+	return twlclk_write(cinfo, TWL_MODULE_PM_RECEIVER, VREG_STATE,
+			    TWL6030_CFG_STATE_ON);
 }
 
 static void twl6032_clks_unprepare(struct clk_hw *hw)

drivers/clk/clk-twl.c static void twl6032_clks_unprepare(struct clk_hw *hw) · line 94

Quoted 6 lines
drivers/clk/clk-twl.c +1 -2
@@ -71,10 +91,16 @@ static void twl6032_clks_unprepare(struct clk_hw *hw)
 	struct twl_clock_info *cinfo = to_twl_clks_info(hw);
 	int ret;
 
-	ret = twlclk_write(cinfo, TWL_MODULE_PM_RECEIVER, VREG_STATE,
-			   TWL6030_CFG_STATE_OFF);
+	if (platform_get_device_id(cinfo->pdev)->driver_data == DRIVER_DATA_TWL6030)

here too.

Quoted 14 lines
drivers/clk/clk-twl.c +8 -1
+		ret = twlclk_write(cinfo, TWL_MODULE_PM_RECEIVER, VREG_STATE,
+				   ALL_GRP << TWL6030_CFG_STATE_GRP_SHIFT |
+				   TWL6030_CFG_STATE_OFF);
+	else
+		ret = twlclk_write(cinfo, TWL_MODULE_PM_RECEIVER, VREG_STATE,
+				   TWL6030_CFG_STATE_OFF);
+
 	if (ret < 0)
-		dev_err(cinfo->dev, "clk unprepare failed\n");
+		dev_err(&cinfo->pdev->dev, "clk unprepare failed\n");
 }
 
 static const struct clk_ops twl6032_clks_ops = {

drivers/clk/clk-twl.c static int twl_clks_probe(struct platform_device *pdev) · line 166

Quoted 5 lines
drivers/clk/clk-twl.c +1 -1
@@ -137,7 +163,7 @@ static int twl_clks_probe(struct platform_device *pdev)
 
 	for (i = 0; i < count; i++) {
 		cinfo[i].base = hw_data[i].base;
-		cinfo[i].dev = &pdev->dev;
+		cinfo[i].pdev = pdev;

here we can initialize twl type like so.

		cinfo[i].type = platform_get_device_id(pdev)->driver_data;

drivers/clk/clk-twl.c static int twl_clks_probe(struct platform_device *pdev) · line 189

Quoted 9 lines
drivers/clk/clk-twl.c +2 -0
 		cinfo[i].hw.init = &hw_data[i].init;
 		ret = devm_clk_hw_register(&pdev->dev, &cinfo[i].hw);
 		if (ret) {
@@ -159,7 +185,11 @@ static int twl_clks_probe(struct platform_device *pdev)
 
 static const struct platform_device_id twl_clks_id[] = {
 	{
+		.name = "twl6030-clk",
+		.driver_data = DRIVER_DATA_TWL6030,

TWL_TYPE_6030

drivers/clk/clk-twl.c static int twl_clks_probe(struct platform_device *pdev) · line 192

Quoted 3 lines
drivers/clk/clk-twl.c +2 -0
+	}, {
 		.name = "twl6032-clk",
+		.driver_data = DRIVER_DATA_TWL6032,

TWL_TYPE_6032

Quoted 3 lines
drivers/clk/clk-twl.c +0 -0
 	}, {
 		/* sentinel */
 	}
Signature · 2 lines
cheers,
-roger
author maintainer
#6 lore raw
In reply to Andreas Kemnade

Am Wed, 2 Oct 2024 13:07:15 +0200
schrieb Andreas Kemnade <[email protected]>:

Quoted 5 lines

Previously the clock support for only implemented for TWL6032 so add it also for the TWL6030. There are devices out there where especially WLAN only works if these clocks are enabled by some patched U-Boot. This allows to explicitly specify the clock requirements.

oh, forgotten the changelog:
Changes in V2:
- cleanup some defines
- no separate ops for 6030
- remove is_prepared()
- update Kconfig

Regards,
Andreas