Skip to contentSkip to conversation

Prepare GHES driver to support error injection

PATCH Superseded Mauro Carvalho Chehab 3 participants 27 messages Dec 4, 2024 – Dec 9, 2024 KVM

v5 of 7 Superseded Latest is v7 →

lore
Share & tools
lore
#0 lore raw

v5 cover Prepare GHES driver to support error injection

During the development of a patch series meant to allow GHESv2 error injections, it was requested a change on how CPER offsets are calculated, by adding a new BIOS pointer and reworking the GHES logic. See:

https://lore.kernel.org/qemu-devel/[email protected]/

Such change ended being a big patch, so several intermediate steps are needed, together with several cleanups and renames.

As agreed during v10 review, I'll be splitting the big patch series into separate pull requests, starting with the cleanup series. This is the first patch set, containing only such preparation patches.

The next series will contain the shift to use offsets from the location of the HEST table, together with a migration logic to make it compatible with 9.1.

---

v5:
- added a new patch:
acpi/ghes: don't check if physical_address is not zero
- removed a duplicated le64_to_cpu();
- changed a comment about writing 1 to read ack register.

v4:
- merged a patch renaming the function which calculate offsets to:
get_hw_error_offsets(), to avoid the need of such change at the next patch series;
- removed a functional change at the logic which makes
the GHES record generation more generic;
- a couple of trivial changes on patch descriptions and line break cleanups.

v3:
- improved some patch descriptions;
- some patches got reordered to better reflect the changes;
- patch v2 08/15: acpi/ghes: Prepare to support multiple sources on ghes was split on two patches. The first one is in this cleanup series:
acpi/ghes: Change ghes fill logic to work with only one source
contains just the simplification logic. The actual preparation will be moved to this series:

     https://lore.kernel.org/qemu-devel/[email protected]/

v2:
- some indentation fixes;
- some description improvements;
- fixed a badly-solved merge conflict that ended renaming a parameter.

Mauro Carvalho Chehab (16):
acpi/ghes: get rid of ACPI_HEST_SRC_ID_RESERVED acpi/ghes: simplify acpi_ghes_record_errors() code acpi/ghes: simplify the per-arch caller to build HEST table acpi/ghes: better handle source_id and notification acpi/ghes: Fix acpi_ghes_record_errors() argument acpi/ghes: Remove a duplicated out of bounds check acpi/ghes: Change the type for source_id
acpi/ghes: don't check if physical_address is not zero acpi/ghes: make the GHES record generation more generic acpi/ghes: better name GHES memory error function acpi/ghes: don't crash QEMU if ghes GED is not found acpi/ghes: rename etc/hardware_error file macros acpi/ghes: better name the offset of the hardware error firmware acpi/ghes: move offset calculus to a separate function acpi/ghes: Change ghes fill logic to work with only one source
docs: acpi_hest_ghes: fix documentation for CPER size

 docs/specs/acpi_hest_ghes.rst  |   6 +-
 hw/acpi/generic_event_device.c |   4 +-
 hw/acpi/ghes-stub.c            |   2 +-
 hw/acpi/ghes.c                 | 259 +++++++++++++++++++--------------
 hw/arm/virt-acpi-build.c       |   5 +-
 include/hw/acpi/ghes.h         |  16 +-
 target/arm/kvm.c               |   2 +-
 7 files changed, 169 insertions(+), 125 deletions(-)
Signature · 1 line
2.47.1
#1 lore raw

PATCH v5 1/16 acpi/ghes: get rid of ACPI_HEST_SRC_ID_RESERVED

This is just duplicating ACPI_GHES_ERROR_SOURCE_COUNT, which has a better name. So, drop the duplication.

---
 hw/acpi/ghes.c         | 7 ++-----
 include/hw/acpi/ghes.h | 3 ++-
 2 files changed, 4 insertions(+), 6 deletions(-)
hw/acpi/ghes.c +2 -5
index e9511d9b8f71..dc217694deb9 100644
@@ -34,9 +34,6 @@
 /* The max size in bytes for one error block */
 #define ACPI_GHES_MAX_RAW_DATA_LENGTH   (1 * KiB)
 
-/* Now only support ARMv8 SEA notification type error source */
-#define ACPI_GHES_ERROR_SOURCE_COUNT        1
-
 /* Generic Hardware Error Source version 2 */
 #define ACPI_GHES_SOURCE_GENERIC_ERROR_V2   10
 
@@ -396,7 +393,7 @@ int acpi_ghes_record_errors(uint8_t source_id, uint64_t physical_address)
     AcpiGedState *acpi_ged_state;
     AcpiGhesState *ags;
 
-    assert(source_id < ACPI_HEST_SRC_ID_RESERVED);
+    assert(source_id < ACPI_GHES_ERROR_SOURCE_COUNT);
 
     acpi_ged_state = ACPI_GED(object_resolve_path_type("", TYPE_ACPI_GED,
                                                        NULL));
@@ -407,7 +404,7 @@ int acpi_ghes_record_errors(uint8_t source_id, uint64_t physical_address)
 
     if (physical_address) {
 
-        if (source_id < ACPI_HEST_SRC_ID_RESERVED) {
+        if (source_id < ACPI_GHES_ERROR_SOURCE_COUNT) {
             start_addr += source_id * sizeof(uint64_t);
         }
 
include/hw/acpi/ghes.h +2 -1
index 674f6958e905..59e3b8fb24b9 100644
@@ -59,7 +59,8 @@ enum AcpiGhesNotifyType {
 enum {
     ACPI_HEST_SRC_ID_SEA = 0,
     /* future ids go here */
-    ACPI_HEST_SRC_ID_RESERVED,
+
+    ACPI_GHES_ERROR_SOURCE_COUNT
 };
 
 typedef struct AcpiGhesState {
Signature · 1 line
2.47.1
#2 lore raw

PATCH v5 2/16 acpi/ghes: simplify acpi_ghes_record_errors() code

In reply to Mauro Carvalho Chehab

Reduce the ident of the function and prepares it for the next changes.

No functional changes.

---
 hw/acpi/ghes.c | 56 ++++++++++++++++++++++++++------------------------
 1 file changed, 29 insertions(+), 27 deletions(-)
hw/acpi/ghes.c +29 -27
index dc217694deb9..e66f3be1502b 100644
@@ -402,40 +402,42 @@ int acpi_ghes_record_errors(uint8_t source_id, uint64_t physical_address)
 
     start_addr = le64_to_cpu(ags->ghes_addr_le);
 
-    if (physical_address) {
+    if (!physical_address) {
+        return -1;
+    }
 
-        if (source_id < ACPI_GHES_ERROR_SOURCE_COUNT) {
-            start_addr += source_id * sizeof(uint64_t);
-        }
+    if (source_id < ACPI_GHES_ERROR_SOURCE_COUNT) {
+        start_addr += source_id * sizeof(uint64_t);
+    }
 
-        cpu_physical_memory_read(start_addr, &error_block_addr,
-                                 sizeof(error_block_addr));
+    cpu_physical_memory_read(start_addr, &error_block_addr,
+                             sizeof(error_block_addr));
 
-        error_block_addr = le64_to_cpu(error_block_addr);
+    error_block_addr = le64_to_cpu(error_block_addr);
 
-        read_ack_register_addr = start_addr +
-            ACPI_GHES_ERROR_SOURCE_COUNT * sizeof(uint64_t);
+    read_ack_register_addr = start_addr +
+                             ACPI_GHES_ERROR_SOURCE_COUNT * sizeof(uint64_t);
 
-        cpu_physical_memory_read(read_ack_register_addr,
-                                 &read_ack_register, sizeof(read_ack_register));
+    cpu_physical_memory_read(read_ack_register_addr,
+                             &read_ack_register, sizeof(read_ack_register));
 
-        /* zero means OSPM does not acknowledge the error */
-        if (!read_ack_register) {
-            error_report("OSPM does not acknowledge previous error,"
-                " so can not record CPER for current error anymore");
-        } else if (error_block_addr) {
-            read_ack_register = cpu_to_le64(0);
-            /*
-             * Clear the Read Ack Register, OSPM will write it to 1 when
-             * it acknowledges this error.
-             */
-            cpu_physical_memory_write(read_ack_register_addr,
-                &read_ack_register, sizeof(uint64_t));
+    /* zero means OSPM does not acknowledge the error */
+    if (!read_ack_register) {
+        error_report("OSPM does not acknowledge previous error,"
+                     " so can not record CPER for current error anymore");
+    } else if (error_block_addr) {
+        read_ack_register = cpu_to_le64(0);
+        /*
+         * Clear the Read Ack Register, OSPM will write it to 1 when
+         * it acknowledges this error.
+         */
+        cpu_physical_memory_write(read_ack_register_addr,
+                                  &read_ack_register, sizeof(uint64_t));
 
-            ret = acpi_ghes_record_mem_error(error_block_addr,
-                                             physical_address);
-        } else
-            error_report("can not find Generic Error Status Block");
+        ret = acpi_ghes_record_mem_error(error_block_addr,
+                                         physical_address);
+    } else {
+        error_report("can not find Generic Error Status Block");
     }
 
     return ret;
Signature · 1 line
2.47.1
#3 lore raw

PATCH v5 3/16 acpi/ghes: simplify the per-arch caller to build HEST table

In reply to Mauro Carvalho Chehab

The GHES driver requires not only a HEST table, but also a separate firmware file to store Error Structure records. It can't do one without the other.

Simplify the caller logic for it to require one function.

No functional changes.

---

Changes from v10:
- Removed the logic which associates notification and source ID. This will be placed on a separate patch.

Changes from v8:
- Non-rename/cleanup changes merged altogether;
- source ID is now more generic, defined per guest target. That should make easier to add support for 86.

---
 hw/acpi/ghes.c           | 7 +++++--
 hw/arm/virt-acpi-build.c | 5 ++---
 include/hw/acpi/ghes.h   | 4 ++--
 3 files changed, 9 insertions(+), 7 deletions(-)
hw/acpi/ghes.c +5 -2
index e66f3be1502b..4a6c45bcb4be 100644
@@ -233,7 +233,7 @@ static int acpi_ghes_record_mem_error(uint64_t error_block_address,
  * Initialize "etc/hardware_errors" and "etc/hardware_errors_addr" fw_cfg blobs.
  * See docs/specs/acpi_hest_ghes.rst for blobs format.
  */
-void build_ghes_error_table(GArray *hardware_errors, BIOSLinker *linker)
+static void build_ghes_error_table(GArray *hardware_errors, BIOSLinker *linker)
 {
     int i, error_status_block_offset;
 
@@ -356,12 +356,15 @@ static void build_ghes_v2(GArray *table_data, int source_id, BIOSLinker *linker)
 }
 
 /* Build Hardware Error Source Table */
-void acpi_build_hest(GArray *table_data, BIOSLinker *linker,
+void acpi_build_hest(GArray *table_data, GArray *hardware_errors,
+                     BIOSLinker *linker,
                      const char *oem_id, const char *oem_table_id)
 {
     AcpiTable table = { .sig = "HEST", .rev = 1,
                         .oem_id = oem_id, .oem_table_id = oem_table_id };
 
+    build_ghes_error_table(hardware_errors, linker);
+
     acpi_table_begin(&table, table_data);
 
     /* Error Source Count */
hw/arm/virt-acpi-build.c +2 -3
index 620992c92c12..e059317b002e 100644
@@ -942,10 +942,9 @@ void virt_acpi_build(VirtMachineState *vms, AcpiBuildTables *tables)
     build_dbg2(tables_blob, tables->linker, vms);
 
     if (vms->ras) {
-        build_ghes_error_table(tables->hardware_errors, tables->linker);
         acpi_add_table(table_offsets, tables_blob);
-        acpi_build_hest(tables_blob, tables->linker, vms->oem_id,
-                        vms->oem_table_id);
+        acpi_build_hest(tables_blob, tables->hardware_errors, tables->linker,
+                        vms->oem_id, vms->oem_table_id);
     }
 
     if (ms->numa_state->num_nodes > 0) {
include/hw/acpi/ghes.h +2 -2
index 59e3b8fb24b9..20016c226d1f 100644
@@ -68,8 +68,8 @@ typedef struct AcpiGhesState {
     bool present; /* True if GHES is present at all on this board */
 } AcpiGhesState;
 
-void build_ghes_error_table(GArray *hardware_errors, BIOSLinker *linker);
-void acpi_build_hest(GArray *table_data, BIOSLinker *linker,
+void acpi_build_hest(GArray *table_data, GArray *hardware_errors,
+                     BIOSLinker *linker,
                      const char *oem_id, const char *oem_table_id);
 void acpi_ghes_add_fw_cfg(AcpiGhesState *vms, FWCfgState *s,
                           GArray *hardware_errors);
Signature · 1 line
2.47.1
#4 lore raw

PATCH v5 4/16 acpi/ghes: better handle source_id and notification

In reply to Mauro Carvalho Chehab

GHES has two fields that are stored on HEST error source blocks associated with notifications:

- notification type, which is a number defined at the ACPI spec containing several arch-specific synchronous and assynchronous types;
- source id, which is a HW/FW defined number, used to distinguish between different implemented sources.

There could be several sources with the same notification type, which is dependent of the way each architecture maps notifications.

Right now, build_ghes_v2() hardcodes a 1:1 mapping between such fields. Move it to two independent parameters, allowing the caller function to fill both.

---

Chenges from v10:

- Some changes got moved to the previous patch.

Changes from v8:
- Non-rename/cleanup changes merged altogether;
- source ID is now more generic, defined per guest target. That should make easier to add support for 86.

---
 hw/acpi/ghes.c | 23 +++++++++--------------
 1 file changed, 9 insertions(+), 14 deletions(-)
hw/acpi/ghes.c +9 -14
index 4a6c45bcb4be..29cd7e4d8171 100644
@@ -284,9 +284,13 @@ static void build_ghes_error_table(GArray *hardware_errors, BIOSLinker *linker)
 }
 
 /* Build Generic Hardware Error Source version 2 (GHESv2) */
-static void build_ghes_v2(GArray *table_data, int source_id, BIOSLinker *linker)
+static void build_ghes_v2(GArray *table_data,
+                          BIOSLinker *linker,
+                          enum AcpiGhesNotifyType notify,
+                          uint16_t source_id)
 {
     uint64_t address_offset;
+
     /*
      * Type:
      * Generic Hardware Error Source version 2(GHESv2 - Type 10)
@@ -316,18 +320,8 @@ static void build_ghes_v2(GArray *table_data, int source_id, BIOSLinker *linker)
         address_offset + GAS_ADDR_OFFSET, sizeof(uint64_t),
         ACPI_GHES_ERRORS_FW_CFG_FILE, source_id * sizeof(uint64_t));
 
-    switch (source_id) {
-    case ACPI_HEST_SRC_ID_SEA:
-        /*
-         * Notification Structure
-         * Now only enable ARMv8 SEA notification type
-         */
-        build_ghes_hw_error_notification(table_data, ACPI_GHES_NOTIFY_SEA);
-        break;
-    default:
-        error_report("Not support this error source");
-        abort();
-    }
+    /* Notification Structure */
+    build_ghes_hw_error_notification(table_data, notify);
 
     /* Error Status Block Length */
     build_append_int_noprefix(table_data, ACPI_GHES_MAX_RAW_DATA_LENGTH, 4);
@@ -369,7 +363,8 @@ void acpi_build_hest(GArray *table_data, GArray *hardware_errors,
 
     /* Error Source Count */
     build_append_int_noprefix(table_data, ACPI_GHES_ERROR_SOURCE_COUNT, 4);
-    build_ghes_v2(table_data, ACPI_HEST_SRC_ID_SEA, linker);
+    build_ghes_v2(table_data, linker,
+                  ACPI_GHES_NOTIFY_SEA, ACPI_HEST_SRC_ID_SEA);
 
     acpi_table_end(linker, &table);
 }
Signature · 1 line
2.47.1
#5 lore raw

PATCH v5 5/16 acpi/ghes: Fix acpi_ghes_record_errors() argument

In reply to Mauro Carvalho Chehab

Align the header file with the actual implementation of this function, as the first argument is source ID and not notification type.

---

Changes from v8:
- Non-rename/cleanup changes merged altogether;
- source ID is now more generic, defined per guest target. That should make easier to add support for 86.

---
 include/hw/acpi/ghes.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
include/hw/acpi/ghes.h +1 -1
index 20016c226d1f..50e3a25ea384 100644
@@ -73,7 +73,7 @@ void acpi_build_hest(GArray *table_data, GArray *hardware_errors,
                      const char *oem_id, const char *oem_table_id);
 void acpi_ghes_add_fw_cfg(AcpiGhesState *vms, FWCfgState *s,
                           GArray *hardware_errors);
-int acpi_ghes_record_errors(uint8_t notify, uint64_t error_physical_addr);
+int acpi_ghes_record_errors(uint8_t source_id, uint64_t error_physical_addr);
 
 /**
  * acpi_ghes_present: Report whether ACPI GHES table is present
Signature · 1 line
2.47.1
#6 lore raw

PATCH v5 6/16 acpi/ghes: Remove a duplicated out of bounds check

In reply to Mauro Carvalho Chehab

acpi_ghes_record_errors() has an assert() at the beginning to ensure that source_id will be lower than ACPI_GHES_ERROR_SOURCE_COUNT. Remove a duplicated check.

---
 hw/acpi/ghes.c | 4 +---
 1 file changed, 1 insertion(+), 3 deletions(-)
hw/acpi/ghes.c +1 -3
index 29cd7e4d8171..5f67322bf0f2 100644
@@ -404,9 +404,7 @@ int acpi_ghes_record_errors(uint8_t source_id, uint64_t physical_address)
         return -1;
     }
 
-    if (source_id < ACPI_GHES_ERROR_SOURCE_COUNT) {
-        start_addr += source_id * sizeof(uint64_t);
-    }
+    start_addr += source_id * sizeof(uint64_t);
 
     cpu_physical_memory_read(start_addr, &error_block_addr,
                              sizeof(error_block_addr));
Signature · 1 line
2.47.1
#7 lore raw

PATCH v5 7/16 acpi/ghes: Change the type for source_id

In reply to Mauro Carvalho Chehab

As described at: ACPI 6.5 spec at:

	18.3.2. ACPI Error Source

In particular at GHES/GHESv2 table:
Table 18.10 Generic Hardware Error Source Structure

HEST source ID is actually a 16-bit value.

---
 hw/acpi/ghes-stub.c    | 2 +-
 hw/acpi/ghes.c         | 2 +-
 include/hw/acpi/ghes.h | 2 +-
 3 files changed, 3 insertions(+), 3 deletions(-)
hw/acpi/ghes-stub.c +1 -1
index c315de1802d6..2b64cbd2819a 100644
@@ -11,7 +11,7 @@
 #include "qemu/osdep.h"
 #include "hw/acpi/ghes.h"
 
-int acpi_ghes_record_errors(uint8_t source_id, uint64_t physical_address)
+int acpi_ghes_record_errors(uint16_t source_id, uint64_t physical_address)
 {
     return -1;
 }
hw/acpi/ghes.c +1 -1
index 5f67322bf0f2..edc74c38bf8a 100644
@@ -383,7 +383,7 @@ void acpi_ghes_add_fw_cfg(AcpiGhesState *ags, FWCfgState *s,
     ags->present = true;
 }
 
-int acpi_ghes_record_errors(uint8_t source_id, uint64_t physical_address)
+int acpi_ghes_record_errors(uint16_t source_id, uint64_t physical_address)
 {
     uint64_t error_block_addr, read_ack_register_addr, read_ack_register = 0;
     uint64_t start_addr;
include/hw/acpi/ghes.h +1 -1
index 50e3a25ea384..9295e46be25e 100644
@@ -73,7 +73,7 @@ void acpi_build_hest(GArray *table_data, GArray *hardware_errors,
                      const char *oem_id, const char *oem_table_id);
 void acpi_ghes_add_fw_cfg(AcpiGhesState *vms, FWCfgState *s,
                           GArray *hardware_errors);
-int acpi_ghes_record_errors(uint8_t source_id, uint64_t error_physical_addr);
+int acpi_ghes_record_errors(uint16_t source_id, uint64_t error_physical_addr);
 
 /**
  * acpi_ghes_present: Report whether ACPI GHES table is present
Signature · 1 line
2.47.1
#8 lore raw

PATCH v5 8/16 acpi/ghes: don't check if physical_address is not zero

In reply to Mauro Carvalho Chehab

The 'physical_address' value is a faulty page. As such, 0 is as valid as any other value.

---
 hw/acpi/ghes.c | 4 ----
 1 file changed, 4 deletions(-)
hw/acpi/ghes.c +0 -4
index edc74c38bf8a..a3dffd78b012 100644
@@ -400,10 +400,6 @@ int acpi_ghes_record_errors(uint16_t source_id, uint64_t physical_address)
 
     start_addr = le64_to_cpu(ags->ghes_addr_le);
 
-    if (!physical_address) {
-        return -1;
-    }
-
     start_addr += source_id * sizeof(uint64_t);
 
     cpu_physical_memory_read(start_addr, &error_block_addr,
Signature · 1 line
2.47.1
Reviewed-by on v5 8/16
#9 lore raw

Re: [PATCH v5 08/16] acpi/ghes: don't check if physical_address is not zero

Quoted 5 lines · On Wed, 4 Dec 2024 08:41:16 +0100 Mauro Carvalho Chehab…

The 'physical_address' value is a faulty page. As such, 0 is as valid as any other value.

Quoted 19 lines
---
 hw/acpi/ghes.c | 4 ----
 1 file changed, 4 deletions(-)
hw/acpi/ghes.c +0 -4
index edc74c38bf8a..a3dffd78b012 100644
@@ -400,10 +400,6 @@ int acpi_ghes_record_errors(uint16_t source_id, uint64_t physical_address)
 
     start_addr = le64_to_cpu(ags->ghes_addr_le);
 
-    if (!physical_address) {
-        return -1;
-    }
-
     start_addr += source_id * sizeof(uint64_t);
 
     cpu_physical_memory_read(start_addr, &error_block_addr,
Reviewed-by
#10 lore raw

Re: [PATCH v5 08/16] acpi/ghes: don't check if physical_address is not zero

Quoted 5 lines · On Wed, 4 Dec 2024 14:12:46 +0100 Igor Mammedov <[email protected]> wrote:
Quoted 2 lines · On Wed, 4 Dec 2024 08:41:16 +0100 Mauro Carvalho Chehab…

The 'physical_address' value is a faulty page. As such, 0 is as valid as any other value.

I'm not sure what a 'faulty page' is. but code looks fine.

Quoted 27 lines
Quoted 3 lines
Quoted 19 lines
---
 hw/acpi/ghes.c | 4 ----
 1 file changed, 4 deletions(-)
hw/acpi/ghes.c +0 -4
index edc74c38bf8a..a3dffd78b012 100644
@@ -400,10 +400,6 @@ int acpi_ghes_record_errors(uint16_t source_id, uint64_t physical_address)
 
     start_addr = le64_to_cpu(ags->ghes_addr_le);
 
-    if (!physical_address) {
-        return -1;
-    }
-
     start_addr += source_id * sizeof(uint64_t);
 
     cpu_physical_memory_read(start_addr, &error_block_addr,  
#11 lore raw

PATCH v5 9/16 acpi/ghes: make the GHES record generation more generic

In reply to Mauro Carvalho Chehab

Split the code into separate functions to allow using the common CPER filling code by different error sources.

The generic code was moved to ghes_record_cper_errors(), and ghes_gen_err_data_uncorrectable_recoverable() now contains only a logic to fill the Generic Error Data part of the record, as described at:

	ACPI 6.2: 18.3.2.7.1 Generic Error Data

The remaining code to generate a memory error now belongs to acpi_ghes_record_errors() function.

A further patch will give it a better name.

# Conflicts:
# roms/edk2

---
 hw/acpi/ghes.c         | 121 ++++++++++++++++++++++++-----------------
 include/hw/acpi/ghes.h |   3 +
 2 files changed, 73 insertions(+), 51 deletions(-)
hw/acpi/ghes.c +70 -51
index a3dffd78b012..4b5332f8c667 100644
@@ -181,51 +181,24 @@ static void acpi_ghes_build_append_mem_cper(GArray *table,
     build_append_int_noprefix(table, 0, 7);
 }
 
-static int acpi_ghes_record_mem_error(uint64_t error_block_address,
-                                      uint64_t error_physical_addr)
+static void
+ghes_gen_err_data_uncorrectable_recoverable(GArray *block,
+                                            const uint8_t *section_type,
+                                            int data_length)
 {
-    GArray *block;
-
-    /* Memory Error Section Type */
-    const uint8_t uefi_cper_mem_sec[] =
-          UUID_LE(0xA5BC1114, 0x6F64, 0x4EDE, 0xB8, 0x63, 0x3E, 0x83, \
-                  0xED, 0x7C, 0x83, 0xB1);
-
     /* invalid fru id: ACPI 4.0: 17.3.2.6.1 Generic Error Data,
      * Table 17-13 Generic Error Data Entry
      */
     QemuUUID fru_id = {};
-    uint32_t data_length;
-
-    block = g_array_new(false, true /* clear */, 1);
-
-    /* This is the length if adding a new generic error data entry*/
-    data_length = ACPI_GHES_DATA_LENGTH + ACPI_GHES_MEM_CPER_LENGTH;
-    /*
-     * It should not run out of the preallocated memory if adding a new generic
-     * error data entry
-     */
-    assert((data_length + ACPI_GHES_GESB_SIZE) <=
-            ACPI_GHES_MAX_RAW_DATA_LENGTH);
 
     /* Build the new generic error status block header */
     acpi_ghes_generic_error_status(block, ACPI_GEBS_UNCORRECTABLE,
         0, 0, data_length, ACPI_CPER_SEV_RECOVERABLE);
 
     /* Build this new generic error data entry header */
-    acpi_ghes_generic_error_data(block, uefi_cper_mem_sec,
+    acpi_ghes_generic_error_data(block, section_type,
         ACPI_CPER_SEV_RECOVERABLE, 0, 0,
         ACPI_GHES_MEM_CPER_LENGTH, fru_id, 0);
-
-    /* Build the memory section CPER for above new generic error data entry */
-    acpi_ghes_build_append_mem_cper(block, error_physical_addr);
-
-    /* Write the generic error data entry into guest memory */
-    cpu_physical_memory_write(error_block_address, block->data, block->len);
-
-    g_array_free(block, true);
-
-    return 0;
 }
 
 /*
@@ -383,15 +356,18 @@ void acpi_ghes_add_fw_cfg(AcpiGhesState *ags, FWCfgState *s,
     ags->present = true;
 }
 
-int acpi_ghes_record_errors(uint16_t source_id, uint64_t physical_address)
+void ghes_record_cper_errors(const void *cper, size_t len,
+                             uint16_t source_id, Error **errp)
 {
     uint64_t error_block_addr, read_ack_register_addr, read_ack_register = 0;
     uint64_t start_addr;
-    bool ret = -1;
     AcpiGedState *acpi_ged_state;
     AcpiGhesState *ags;
 
-    assert(source_id < ACPI_GHES_ERROR_SOURCE_COUNT);
+    if (len > ACPI_GHES_MAX_RAW_DATA_LENGTH) {
+        error_setg(errp, "GHES CPER record is too big: %ld", len);
+        return;
+    }
 
     acpi_ged_state = ACPI_GED(object_resolve_path_type("", TYPE_ACPI_GED,
                                                        NULL));
@@ -406,6 +382,10 @@ int acpi_ghes_record_errors(uint16_t source_id, uint64_t physical_address)
                              sizeof(error_block_addr));
 
     error_block_addr = le64_to_cpu(error_block_addr);
+    if (!error_block_addr) {
+        error_setg(errp, "can not find Generic Error Status Block");
+        return;
+    }
 
     read_ack_register_addr = start_addr +
                              ACPI_GHES_ERROR_SOURCE_COUNT * sizeof(uint64_t);
@@ -415,24 +395,63 @@ int acpi_ghes_record_errors(uint16_t source_id, uint64_t physical_address)
 
     /* zero means OSPM does not acknowledge the error */
     if (!read_ack_register) {
-        error_report("OSPM does not acknowledge previous error,"
-                     " so can not record CPER for current error anymore");
-    } else if (error_block_addr) {
-        read_ack_register = cpu_to_le64(0);
-        /*
-         * Clear the Read Ack Register, OSPM will write it to 1 when
-         * it acknowledges this error.
-         */
-        cpu_physical_memory_write(read_ack_register_addr,
-                                  &read_ack_register, sizeof(uint64_t));
-
-        ret = acpi_ghes_record_mem_error(error_block_addr,
-                                         physical_address);
-    } else {
-        error_report("can not find Generic Error Status Block");
+        error_setg(errp,
+                   "OSPM does not acknowledge previous error,"
+                   " so can not record CPER for current error anymore");
+        return;
     }
 
-    return ret;
+    read_ack_register = cpu_to_le64(0);
+    /*
+     * Clear the Read Ack Register, OSPM will write 1 to this register when
+     * it acknowledges the error.
+     */
+    cpu_physical_memory_write(read_ack_register_addr,
+        &read_ack_register, sizeof(uint64_t));
+
+    /* Write the generic error data entry into guest memory */
+    cpu_physical_memory_write(error_block_addr, cper, len);
+
+    return;
+}
+
+int acpi_ghes_record_errors(uint16_t source_id, uint64_t physical_address)
+{
+    /* Memory Error Section Type */
+    const uint8_t guid[] =
+          UUID_LE(0xA5BC1114, 0x6F64, 0x4EDE, 0xB8, 0x63, 0x3E, 0x83, \
+                  0xED, 0x7C, 0x83, 0xB1);
+    Error *errp = NULL;
+    int data_length;
+    GArray *block;
+
+    block = g_array_new(false, true /* clear */, 1);
+
+    data_length = ACPI_GHES_DATA_LENGTH + ACPI_GHES_MEM_CPER_LENGTH;
+    /*
+     * It should not run out of the preallocated memory if adding a new generic
+     * error data entry
+     */
+    assert((data_length + ACPI_GHES_GESB_SIZE) <=
+            ACPI_GHES_MAX_RAW_DATA_LENGTH);
+
+    ghes_gen_err_data_uncorrectable_recoverable(block, guid,
+                                                data_length);
+
+    /* Build the memory section CPER for above new generic error data entry */
+    acpi_ghes_build_append_mem_cper(block, physical_address);
+
+    /* Report the error */
+    ghes_record_cper_errors(block->data, block->len, source_id, &errp);
+
+    g_array_free(block, true);
+
+    if (errp) {
+        error_report_err(errp);
+        return -1;
+    }
+
+    return 0;
 }
 
 bool acpi_ghes_present(void)
include/hw/acpi/ghes.h +3 -0
index 9295e46be25e..8859346af51a 100644
@@ -23,6 +23,7 @@
 #define ACPI_GHES_H
 
 #include "hw/acpi/bios-linker-loader.h"
+#include "qapi/error.h"
 
 /*
  * Values for Hardware Error Notification Type field
@@ -73,6 +74,8 @@ void acpi_build_hest(GArray *table_data, GArray *hardware_errors,
                      const char *oem_id, const char *oem_table_id);
 void acpi_ghes_add_fw_cfg(AcpiGhesState *vms, FWCfgState *s,
                           GArray *hardware_errors);
+void ghes_record_cper_errors(const void *cper, size_t len,
+                             uint16_t source_id, Error **errp);
 int acpi_ghes_record_errors(uint16_t source_id, uint64_t error_physical_addr);
 
 /**
Signature · 1 line
2.47.1
Reviewed-by on v5 9/16
#12 lore raw

Re: [PATCH v5 09/16] acpi/ghes: make the GHES record generation more generic

Quoted 8 lines · On Wed, 4 Dec 2024 08:41:17 +0100 Mauro Carvalho Chehab…

Split the code into separate functions to allow using the common CPER filling code by different error sources.

The generic code was moved to ghes_record_cper_errors(), and ghes_gen_err_data_uncorrectable_recoverable() now contains only a logic to fill the Generic Error Data part of the record, as described at:

Quoted 8 lines
	ACPI 6.2: 18.3.2.7.1 Generic Error Data

The remaining code to generate a memory error now belongs to acpi_ghes_record_errors() function.

A further patch will give it a better name.

Quoted 203 lines

# Conflicts:
# roms/edk2

---
 hw/acpi/ghes.c         | 121 ++++++++++++++++++++++++-----------------
 include/hw/acpi/ghes.h |   3 +
 2 files changed, 73 insertions(+), 51 deletions(-)
hw/acpi/ghes.c +70 -51
index a3dffd78b012..4b5332f8c667 100644
@@ -181,51 +181,24 @@ static void acpi_ghes_build_append_mem_cper(GArray *table,
     build_append_int_noprefix(table, 0, 7);
 }
 
-static int acpi_ghes_record_mem_error(uint64_t error_block_address,
-                                      uint64_t error_physical_addr)
+static void
+ghes_gen_err_data_uncorrectable_recoverable(GArray *block,
+                                            const uint8_t *section_type,
+                                            int data_length)
 {
-    GArray *block;
-
-    /* Memory Error Section Type */
-    const uint8_t uefi_cper_mem_sec[] =
-          UUID_LE(0xA5BC1114, 0x6F64, 0x4EDE, 0xB8, 0x63, 0x3E, 0x83, \
-                  0xED, 0x7C, 0x83, 0xB1);
-
     /* invalid fru id: ACPI 4.0: 17.3.2.6.1 Generic Error Data,
      * Table 17-13 Generic Error Data Entry
      */
     QemuUUID fru_id = {};
-    uint32_t data_length;
-
-    block = g_array_new(false, true /* clear */, 1);
-
-    /* This is the length if adding a new generic error data entry*/
-    data_length = ACPI_GHES_DATA_LENGTH + ACPI_GHES_MEM_CPER_LENGTH;
-    /*
-     * It should not run out of the preallocated memory if adding a new generic
-     * error data entry
-     */
-    assert((data_length + ACPI_GHES_GESB_SIZE) <=
-            ACPI_GHES_MAX_RAW_DATA_LENGTH);
 
     /* Build the new generic error status block header */
     acpi_ghes_generic_error_status(block, ACPI_GEBS_UNCORRECTABLE,
         0, 0, data_length, ACPI_CPER_SEV_RECOVERABLE);
 
     /* Build this new generic error data entry header */
-    acpi_ghes_generic_error_data(block, uefi_cper_mem_sec,
+    acpi_ghes_generic_error_data(block, section_type,
         ACPI_CPER_SEV_RECOVERABLE, 0, 0,
         ACPI_GHES_MEM_CPER_LENGTH, fru_id, 0);
-
-    /* Build the memory section CPER for above new generic error data entry */
-    acpi_ghes_build_append_mem_cper(block, error_physical_addr);
-
-    /* Write the generic error data entry into guest memory */
-    cpu_physical_memory_write(error_block_address, block->data, block->len);
-
-    g_array_free(block, true);
-
-    return 0;
 }
 
 /*
@@ -383,15 +356,18 @@ void acpi_ghes_add_fw_cfg(AcpiGhesState *ags, FWCfgState *s,
     ags->present = true;
 }
 
-int acpi_ghes_record_errors(uint16_t source_id, uint64_t physical_address)
+void ghes_record_cper_errors(const void *cper, size_t len,
+                             uint16_t source_id, Error **errp)
 {
     uint64_t error_block_addr, read_ack_register_addr, read_ack_register = 0;
     uint64_t start_addr;
-    bool ret = -1;
     AcpiGedState *acpi_ged_state;
     AcpiGhesState *ags;
 
-    assert(source_id < ACPI_GHES_ERROR_SOURCE_COUNT);
+    if (len > ACPI_GHES_MAX_RAW_DATA_LENGTH) {
+        error_setg(errp, "GHES CPER record is too big: %ld", len);
+        return;
+    }
 
     acpi_ged_state = ACPI_GED(object_resolve_path_type("", TYPE_ACPI_GED,
                                                        NULL));
@@ -406,6 +382,10 @@ int acpi_ghes_record_errors(uint16_t source_id, uint64_t physical_address)
                              sizeof(error_block_addr));
 
     error_block_addr = le64_to_cpu(error_block_addr);
+    if (!error_block_addr) {
+        error_setg(errp, "can not find Generic Error Status Block");
+        return;
+    }
 
     read_ack_register_addr = start_addr +
                              ACPI_GHES_ERROR_SOURCE_COUNT * sizeof(uint64_t);
@@ -415,24 +395,63 @@ int acpi_ghes_record_errors(uint16_t source_id, uint64_t physical_address)
 
     /* zero means OSPM does not acknowledge the error */
     if (!read_ack_register) {
-        error_report("OSPM does not acknowledge previous error,"
-                     " so can not record CPER for current error anymore");
-    } else if (error_block_addr) {
-        read_ack_register = cpu_to_le64(0);
-        /*
-         * Clear the Read Ack Register, OSPM will write it to 1 when
-         * it acknowledges this error.
-         */
-        cpu_physical_memory_write(read_ack_register_addr,
-                                  &read_ack_register, sizeof(uint64_t));
-
-        ret = acpi_ghes_record_mem_error(error_block_addr,
-                                         physical_address);
-    } else {
-        error_report("can not find Generic Error Status Block");
+        error_setg(errp,
+                   "OSPM does not acknowledge previous error,"
+                   " so can not record CPER for current error anymore");
+        return;
     }
 
-    return ret;
+    read_ack_register = cpu_to_le64(0);
+    /*
+     * Clear the Read Ack Register, OSPM will write 1 to this register when
+     * it acknowledges the error.
+     */
+    cpu_physical_memory_write(read_ack_register_addr,
+        &read_ack_register, sizeof(uint64_t));
+
+    /* Write the generic error data entry into guest memory */
+    cpu_physical_memory_write(error_block_addr, cper, len);
+
+    return;
+}
+
+int acpi_ghes_record_errors(uint16_t source_id, uint64_t physical_address)
+{
+    /* Memory Error Section Type */
+    const uint8_t guid[] =
+          UUID_LE(0xA5BC1114, 0x6F64, 0x4EDE, 0xB8, 0x63, 0x3E, 0x83, \
+                  0xED, 0x7C, 0x83, 0xB1);
+    Error *errp = NULL;
+    int data_length;
+    GArray *block;
+
+    block = g_array_new(false, true /* clear */, 1);
+
+    data_length = ACPI_GHES_DATA_LENGTH + ACPI_GHES_MEM_CPER_LENGTH;
+    /*
+     * It should not run out of the preallocated memory if adding a new generic
+     * error data entry
+     */
+    assert((data_length + ACPI_GHES_GESB_SIZE) <=
+            ACPI_GHES_MAX_RAW_DATA_LENGTH);
+
+    ghes_gen_err_data_uncorrectable_recoverable(block, guid,
+                                                data_length);
+
+    /* Build the memory section CPER for above new generic error data entry */
+    acpi_ghes_build_append_mem_cper(block, physical_address);
+
+    /* Report the error */
+    ghes_record_cper_errors(block->data, block->len, source_id, &errp);
+
+    g_array_free(block, true);
+
+    if (errp) {
+        error_report_err(errp);
+        return -1;
+    }
+
+    return 0;
 }
 
 bool acpi_ghes_present(void)
include/hw/acpi/ghes.h +3 -0
index 9295e46be25e..8859346af51a 100644
@@ -23,6 +23,7 @@
 #define ACPI_GHES_H
 
 #include "hw/acpi/bios-linker-loader.h"
+#include "qapi/error.h"
 
 /*
  * Values for Hardware Error Notification Type field
@@ -73,6 +74,8 @@ void acpi_build_hest(GArray *table_data, GArray *hardware_errors,
                      const char *oem_id, const char *oem_table_id);
 void acpi_ghes_add_fw_cfg(AcpiGhesState *vms, FWCfgState *s,
                           GArray *hardware_errors);
+void ghes_record_cper_errors(const void *cper, size_t len,
+                             uint16_t source_id, Error **errp);
 int acpi_ghes_record_errors(uint16_t source_id, uint64_t error_physical_addr);
 
 /**
#13 lore raw

PATCH v5 10/16 acpi/ghes: better name GHES memory error function

In reply to Mauro Carvalho Chehab

The current function used to generate GHES data is specific for memory errors. Give a better name for it, as we now have a generic function as well.

---
 hw/acpi/ghes-stub.c    | 2 +-
 hw/acpi/ghes.c         | 2 +-
 include/hw/acpi/ghes.h | 4 ++--
 target/arm/kvm.c       | 2 +-
 4 files changed, 5 insertions(+), 5 deletions(-)
hw/acpi/ghes-stub.c +1 -1
index 2b64cbd2819a..7cec1812dad9 100644
@@ -11,7 +11,7 @@
 #include "qemu/osdep.h"
 #include "hw/acpi/ghes.h"
 
-int acpi_ghes_record_errors(uint16_t source_id, uint64_t physical_address)
+int acpi_ghes_memory_errors(uint16_t source_id, uint64_t physical_address)
 {
     return -1;
 }
hw/acpi/ghes.c +1 -1
index 4b5332f8c667..414a4a1ee00e 100644
@@ -415,7 +415,7 @@ void ghes_record_cper_errors(const void *cper, size_t len,
     return;
 }
 
-int acpi_ghes_record_errors(uint16_t source_id, uint64_t physical_address)
+int acpi_ghes_memory_errors(uint16_t source_id, uint64_t physical_address)
 {
     /* Memory Error Section Type */
     const uint8_t guid[] =
include/hw/acpi/ghes.h +2 -2
index 8859346af51a..21666a4bcc8b 100644
@@ -74,15 +74,15 @@ void acpi_build_hest(GArray *table_data, GArray *hardware_errors,
                      const char *oem_id, const char *oem_table_id);
 void acpi_ghes_add_fw_cfg(AcpiGhesState *vms, FWCfgState *s,
                           GArray *hardware_errors);
+int acpi_ghes_memory_errors(uint16_t source_id, uint64_t error_physical_addr);
 void ghes_record_cper_errors(const void *cper, size_t len,
                              uint16_t source_id, Error **errp);
-int acpi_ghes_record_errors(uint16_t source_id, uint64_t error_physical_addr);
 
 /**
  * acpi_ghes_present: Report whether ACPI GHES table is present
  *
  * Returns: true if the system has an ACPI GHES table and it is
- * safe to call acpi_ghes_record_errors() to record a memory error.
+ * safe to call acpi_ghes_memory_errors() to record a memory error.
  */
 bool acpi_ghes_present(void);
 #endif
target/arm/kvm.c +1 -1
index 7b6812c0de2e..b4260467f8b9 100644
@@ -2387,7 +2387,7 @@ void kvm_arch_on_sigbus_vcpu(CPUState *c, int code, void *addr)
              */
             if (code == BUS_MCEERR_AR) {
                 kvm_cpu_synchronize_state(c);
-                if (!acpi_ghes_record_errors(ACPI_HEST_SRC_ID_SEA, paddr)) {
+                if (!acpi_ghes_memory_errors(ACPI_HEST_SRC_ID_SEA, paddr)) {
                     kvm_inject_arm_sea(c);
                 } else {
                     error_report("failed to record the error");
Signature · 1 line
2.47.1
#14 lore raw

Re: [PATCH v5 10/16] acpi/ghes: better name GHES memory error function

Quoted 7 lines · On Wed, 4 Dec 2024 08:41:18 +0100 Mauro Carvalho Chehab…

The current function used to generate GHES data is specific for memory errors. Give a better name for it, as we now have a generic function as well.

not that it matters but for FYI
Sign off of author goes 1st and then after it other tags that were added later

Quoted 68 lines
---
 hw/acpi/ghes-stub.c    | 2 +-
 hw/acpi/ghes.c         | 2 +-
 include/hw/acpi/ghes.h | 4 ++--
 target/arm/kvm.c       | 2 +-
 4 files changed, 5 insertions(+), 5 deletions(-)
hw/acpi/ghes-stub.c +1 -1
index 2b64cbd2819a..7cec1812dad9 100644
@@ -11,7 +11,7 @@
 #include "qemu/osdep.h"
 #include "hw/acpi/ghes.h"
 
-int acpi_ghes_record_errors(uint16_t source_id, uint64_t physical_address)
+int acpi_ghes_memory_errors(uint16_t source_id, uint64_t physical_address)
 {
     return -1;
 }
hw/acpi/ghes.c +1 -1
index 4b5332f8c667..414a4a1ee00e 100644
@@ -415,7 +415,7 @@ void ghes_record_cper_errors(const void *cper, size_t len,
     return;
 }
 
-int acpi_ghes_record_errors(uint16_t source_id, uint64_t physical_address)
+int acpi_ghes_memory_errors(uint16_t source_id, uint64_t physical_address)
 {
     /* Memory Error Section Type */
     const uint8_t guid[] =
include/hw/acpi/ghes.h +2 -2
index 8859346af51a..21666a4bcc8b 100644
@@ -74,15 +74,15 @@ void acpi_build_hest(GArray *table_data, GArray *hardware_errors,
                      const char *oem_id, const char *oem_table_id);
 void acpi_ghes_add_fw_cfg(AcpiGhesState *vms, FWCfgState *s,
                           GArray *hardware_errors);
+int acpi_ghes_memory_errors(uint16_t source_id, uint64_t error_physical_addr);
 void ghes_record_cper_errors(const void *cper, size_t len,
                              uint16_t source_id, Error **errp);
-int acpi_ghes_record_errors(uint16_t source_id, uint64_t error_physical_addr);
 
 /**
  * acpi_ghes_present: Report whether ACPI GHES table is present
  *
  * Returns: true if the system has an ACPI GHES table and it is
- * safe to call acpi_ghes_record_errors() to record a memory error.
+ * safe to call acpi_ghes_memory_errors() to record a memory error.
  */
 bool acpi_ghes_present(void);
 #endif
target/arm/kvm.c +1 -1
index 7b6812c0de2e..b4260467f8b9 100644
@@ -2387,7 +2387,7 @@ void kvm_arch_on_sigbus_vcpu(CPUState *c, int code, void *addr)
              */
             if (code == BUS_MCEERR_AR) {
                 kvm_cpu_synchronize_state(c);
-                if (!acpi_ghes_record_errors(ACPI_HEST_SRC_ID_SEA, paddr)) {
+                if (!acpi_ghes_memory_errors(ACPI_HEST_SRC_ID_SEA, paddr)) {
                     kvm_inject_arm_sea(c);
                 } else {
                     error_report("failed to record the error");
#15 lore raw

Re: [PATCH v5 10/16] acpi/ghes: better name GHES memory error function

Em Wed, 4 Dec 2024 17:40:25 +0100
Igor Mammedov <[email protected]> escreveu:

Quoted 7 lines
Quoted 4 lines · On Wed, 4 Dec 2024 08:41:18 +0100 Mauro Carvalho Chehab…

The current function used to generate GHES data is specific for memory errors. Give a better name for it, as we now have a generic function as well.

Quoted 7 lines
Quoted 3 lines

not that it matters but for FYI
Sign off of author goes 1st and then after it other tags that were added later

Yes, that's what I usually do, when I'm using my developer's hat. Placing reviews before SoB is what I do with my maintainer's hat at the Kernel :-)

I'll address it for the next (and hopefully final) version.

Quoted 61 lines
Quoted 61 lines
---
 hw/acpi/ghes-stub.c    | 2 +-
 hw/acpi/ghes.c         | 2 +-
 include/hw/acpi/ghes.h | 4 ++--
 target/arm/kvm.c       | 2 +-
 4 files changed, 5 insertions(+), 5 deletions(-)
hw/acpi/ghes-stub.c +1 -1
index 2b64cbd2819a..7cec1812dad9 100644
@@ -11,7 +11,7 @@
 #include "qemu/osdep.h"
 #include "hw/acpi/ghes.h"
 
-int acpi_ghes_record_errors(uint16_t source_id, uint64_t physical_address)
+int acpi_ghes_memory_errors(uint16_t source_id, uint64_t physical_address)
 {
     return -1;
 }
hw/acpi/ghes.c +1 -1
index 4b5332f8c667..414a4a1ee00e 100644
@@ -415,7 +415,7 @@ void ghes_record_cper_errors(const void *cper, size_t len,
     return;
 }
 
-int acpi_ghes_record_errors(uint16_t source_id, uint64_t physical_address)
+int acpi_ghes_memory_errors(uint16_t source_id, uint64_t physical_address)
 {
     /* Memory Error Section Type */
     const uint8_t guid[] =
include/hw/acpi/ghes.h +2 -2
index 8859346af51a..21666a4bcc8b 100644
@@ -74,15 +74,15 @@ void acpi_build_hest(GArray *table_data, GArray *hardware_errors,
                      const char *oem_id, const char *oem_table_id);
 void acpi_ghes_add_fw_cfg(AcpiGhesState *vms, FWCfgState *s,
                           GArray *hardware_errors);
+int acpi_ghes_memory_errors(uint16_t source_id, uint64_t error_physical_addr);
 void ghes_record_cper_errors(const void *cper, size_t len,
                              uint16_t source_id, Error **errp);
-int acpi_ghes_record_errors(uint16_t source_id, uint64_t error_physical_addr);
 
 /**
  * acpi_ghes_present: Report whether ACPI GHES table is present
  *
  * Returns: true if the system has an ACPI GHES table and it is
- * safe to call acpi_ghes_record_errors() to record a memory error.
+ * safe to call acpi_ghes_memory_errors() to record a memory error.
  */
 bool acpi_ghes_present(void);
 #endif
target/arm/kvm.c +0 -0
index 7b6812c0de2e..b4260467f8b9 100644
@@ -2387,7 +2387,7 @@ void kvm_arch_on_sigbus_vcpu(CPUState *c, int code, void *addr)
Quoted 9 lines

target/arm/kvm.c void kvm_arch_on_sigbus_vcpu(CPUState *c, int code, void *addr) · line 2393

Quoted 8 lines
target/arm/kvm.c +1 -1
              */
             if (code == BUS_MCEERR_AR) {
                 kvm_cpu_synchronize_state(c);
-                if (!acpi_ghes_record_errors(ACPI_HEST_SRC_ID_SEA, paddr)) {
+                if (!acpi_ghes_memory_errors(ACPI_HEST_SRC_ID_SEA, paddr)) {
                     kvm_inject_arm_sea(c);
                 } else {
                     error_report("failed to record the error");  

Thanks,
Mauro

#16 lore raw

PATCH v5 11/16 acpi/ghes: don't crash QEMU if ghes GED is not found

In reply to Mauro Carvalho Chehab

Make error handling within ghes_record_cper_errors() consistent, i.e. instead abort just print a error in case ghes GED is not found.

---
 hw/acpi/ghes.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)
hw/acpi/ghes.c +4 -1
index 414a4a1ee00e..2df5ddf68a13 100644
@@ -371,7 +371,10 @@ void ghes_record_cper_errors(const void *cper, size_t len,
 
     acpi_ged_state = ACPI_GED(object_resolve_path_type("", TYPE_ACPI_GED,
                                                        NULL));
-    g_assert(acpi_ged_state);
+    if (!acpi_ged_state) {
+        error_setg(errp, "Can't find ACPI_GED object");
+        return;
+    }
     ags = &acpi_ged_state->ghes_state;
 
     start_addr = le64_to_cpu(ags->ghes_addr_le);
Signature · 1 line
2.47.1
#17 lore raw

PATCH v5 12/16 acpi/ghes: rename etc/hardware_error file macros

In reply to Mauro Carvalho Chehab

Now that we have also have a file to store HEST data location, which is part of GHES, better name the file where CPER records are stored.

No functional changes.

---
 hw/acpi/ghes.c | 38 +++++++++++++++++++++++---------------
 1 file changed, 23 insertions(+), 15 deletions(-)
hw/acpi/ghes.c +23 -15
index 2df5ddf68a13..52c2b69d3664 100644
@@ -28,8 +28,8 @@
 #include "hw/nvram/fw_cfg.h"
 #include "qemu/uuid.h"
 
-#define ACPI_GHES_ERRORS_FW_CFG_FILE        "etc/hardware_errors"
-#define ACPI_GHES_DATA_ADDR_FW_CFG_FILE     "etc/hardware_errors_addr"
+#define ACPI_HW_ERROR_FW_CFG_FILE           "etc/hardware_errors"
+#define ACPI_HW_ERROR_ADDR_FW_CFG_FILE      "etc/hardware_errors_addr"
 
 /* The max size in bytes for one error block */
 #define ACPI_GHES_MAX_RAW_DATA_LENGTH   (1 * KiB)
@@ -234,7 +234,7 @@ static void build_ghes_error_table(GArray *hardware_errors, BIOSLinker *linker)
         ACPI_GHES_MAX_RAW_DATA_LENGTH * ACPI_GHES_ERROR_SOURCE_COUNT);
 
     /* Tell guest firmware to place hardware_errors blob into RAM */
-    bios_linker_loader_alloc(linker, ACPI_GHES_ERRORS_FW_CFG_FILE,
+    bios_linker_loader_alloc(linker, ACPI_HW_ERROR_FW_CFG_FILE,
                              hardware_errors, sizeof(uint64_t), false);
 
     for (i = 0; i < ACPI_GHES_ERROR_SOURCE_COUNT; i++) {
@@ -243,17 +243,21 @@ static void build_ghes_error_table(GArray *hardware_errors, BIOSLinker *linker)
          * corresponding "Generic Error Status Block"
          */
         bios_linker_loader_add_pointer(linker,
-            ACPI_GHES_ERRORS_FW_CFG_FILE, sizeof(uint64_t) * i,
-            sizeof(uint64_t), ACPI_GHES_ERRORS_FW_CFG_FILE,
-            error_status_block_offset + i * ACPI_GHES_MAX_RAW_DATA_LENGTH);
+                                       ACPI_HW_ERROR_FW_CFG_FILE,
+                                       sizeof(uint64_t) * i,
+                                       sizeof(uint64_t),
+                                       ACPI_HW_ERROR_FW_CFG_FILE,
+                                       error_status_block_offset +
+                                       i * ACPI_GHES_MAX_RAW_DATA_LENGTH);
     }
 
     /*
      * tell firmware to write hardware_errors GPA into
      * hardware_errors_addr fw_cfg, once the former has been initialized.
      */
-    bios_linker_loader_write_pointer(linker, ACPI_GHES_DATA_ADDR_FW_CFG_FILE,
-        0, sizeof(uint64_t), ACPI_GHES_ERRORS_FW_CFG_FILE, 0);
+    bios_linker_loader_write_pointer(linker, ACPI_HW_ERROR_ADDR_FW_CFG_FILE, 0,
+                                     sizeof(uint64_t),
+                                     ACPI_HW_ERROR_FW_CFG_FILE, 0);
 }
 
 /* Build Generic Hardware Error Source version 2 (GHESv2) */
@@ -290,8 +294,10 @@ static void build_ghes_v2(GArray *table_data,
     build_append_gas(table_data, AML_AS_SYSTEM_MEMORY, 0x40, 0,
                      4 /* QWord access */, 0);
     bios_linker_loader_add_pointer(linker, ACPI_BUILD_TABLE_FILE,
-        address_offset + GAS_ADDR_OFFSET, sizeof(uint64_t),
-        ACPI_GHES_ERRORS_FW_CFG_FILE, source_id * sizeof(uint64_t));
+                                   address_offset + GAS_ADDR_OFFSET,
+                                   sizeof(uint64_t),
+                                   ACPI_HW_ERROR_FW_CFG_FILE,
+                                   source_id * sizeof(uint64_t));
 
     /* Notification Structure */
     build_ghes_hw_error_notification(table_data, notify);
@@ -308,9 +314,11 @@ static void build_ghes_v2(GArray *table_data,
     build_append_gas(table_data, AML_AS_SYSTEM_MEMORY, 0x40, 0,
                      4 /* QWord access */, 0);
     bios_linker_loader_add_pointer(linker, ACPI_BUILD_TABLE_FILE,
-        address_offset + GAS_ADDR_OFFSET,
-        sizeof(uint64_t), ACPI_GHES_ERRORS_FW_CFG_FILE,
-        (ACPI_GHES_ERROR_SOURCE_COUNT + source_id) * sizeof(uint64_t));
+                                   address_offset + GAS_ADDR_OFFSET,
+                                   sizeof(uint64_t),
+                                   ACPI_HW_ERROR_FW_CFG_FILE,
+                                   (ACPI_GHES_ERROR_SOURCE_COUNT + source_id)
+                                   * sizeof(uint64_t));
 
     /*
      * Read Ack Preserve field
@@ -346,11 +354,11 @@ void acpi_ghes_add_fw_cfg(AcpiGhesState *ags, FWCfgState *s,
                           GArray *hardware_error)
 {
     /* Create a read-only fw_cfg file for GHES */
-    fw_cfg_add_file(s, ACPI_GHES_ERRORS_FW_CFG_FILE, hardware_error->data,
+    fw_cfg_add_file(s, ACPI_HW_ERROR_FW_CFG_FILE, hardware_error->data,
                     hardware_error->len);
 
     /* Create a read-write fw_cfg file for Address */
-    fw_cfg_add_file_callback(s, ACPI_GHES_DATA_ADDR_FW_CFG_FILE, NULL, NULL,
+    fw_cfg_add_file_callback(s, ACPI_HW_ERROR_ADDR_FW_CFG_FILE, NULL, NULL,
         NULL, &(ags->ghes_addr_le), sizeof(ags->ghes_addr_le), false);
 
     ags->present = true;
Signature · 1 line
2.47.1
#18 lore raw

PATCH v5 13/16 acpi/ghes: better name the offset of the hardware error firmware

In reply to Mauro Carvalho Chehab

The hardware error firmware is where HEST error structures are stored. Those can be GHESv2, but they can also be other types.

Better name the location of the hardware error.

No functional changes.

---
 hw/acpi/generic_event_device.c | 4 ++--
 hw/acpi/ghes.c                 | 4 ++--
 include/hw/acpi/ghes.h         | 2 +-
 3 files changed, 5 insertions(+), 5 deletions(-)
hw/acpi/generic_event_device.c +2 -2
index 663d9cb09380..17baf36132a8 100644
@@ -364,7 +364,7 @@ static const VMStateDescription vmstate_ghes = {
     .version_id = 1,
     .minimum_version_id = 1,
     .fields = (const VMStateField[]) {
-        VMSTATE_UINT64(ghes_addr_le, AcpiGhesState),
+        VMSTATE_UINT64(hw_error_le, AcpiGhesState),
         VMSTATE_END_OF_LIST()
     },
 };
@@ -372,7 +372,7 @@ static const VMStateDescription vmstate_ghes = {
 static bool ghes_needed(void *opaque)
 {
     AcpiGedState *s = opaque;
-    return s->ghes_state.ghes_addr_le;
+    return s->ghes_state.hw_error_le;
 }
 
 static const VMStateDescription vmstate_ghes_state = {
hw/acpi/ghes.c +2 -2
index 52c2b69d3664..90d76b9c2d8c 100644
@@ -359,7 +359,7 @@ void acpi_ghes_add_fw_cfg(AcpiGhesState *ags, FWCfgState *s,
 
     /* Create a read-write fw_cfg file for Address */
     fw_cfg_add_file_callback(s, ACPI_HW_ERROR_ADDR_FW_CFG_FILE, NULL, NULL,
-        NULL, &(ags->ghes_addr_le), sizeof(ags->ghes_addr_le), false);
+        NULL, &(ags->hw_error_le), sizeof(ags->hw_error_le), false);
 
     ags->present = true;
 }
@@ -385,7 +385,7 @@ void ghes_record_cper_errors(const void *cper, size_t len,
     }
     ags = &acpi_ged_state->ghes_state;
 
-    start_addr = le64_to_cpu(ags->ghes_addr_le);
+    start_addr = le64_to_cpu(ags->hw_error_le);
 
     start_addr += source_id * sizeof(uint64_t);
 
include/hw/acpi/ghes.h +1 -1
index 21666a4bcc8b..39619a2457cb 100644
@@ -65,7 +65,7 @@ enum {
 };
 
 typedef struct AcpiGhesState {
-    uint64_t ghes_addr_le;
+    uint64_t hw_error_le;
     bool present; /* True if GHES is present at all on this board */
 } AcpiGhesState;
 
Signature · 1 line
2.47.1
#19 lore raw

Re: [PATCH v5 13/16] acpi/ghes: better name the offset of the hardware error firmware

Quoted 1 line · On Wed, 4 Dec 2024 08:41:21 +0100 Mauro Carvalho Chehab…

The hardware error firmware is where HEST error structures are

      ^^^^^^^^^^^^^^^^^^^^^^^ I can't parse this, suspect you've meant something else here
Quoted 72 lines

stored. Those can be GHESv2, but they can also be other types.

Better name the location of the hardware error.

No functional changes.

---
 hw/acpi/generic_event_device.c | 4 ++--
 hw/acpi/ghes.c                 | 4 ++--
 include/hw/acpi/ghes.h         | 2 +-
 3 files changed, 5 insertions(+), 5 deletions(-)
hw/acpi/generic_event_device.c +2 -2
index 663d9cb09380..17baf36132a8 100644
@@ -364,7 +364,7 @@ static const VMStateDescription vmstate_ghes = {
     .version_id = 1,
     .minimum_version_id = 1,
     .fields = (const VMStateField[]) {
-        VMSTATE_UINT64(ghes_addr_le, AcpiGhesState),
+        VMSTATE_UINT64(hw_error_le, AcpiGhesState),
         VMSTATE_END_OF_LIST()
     },
 };
@@ -372,7 +372,7 @@ static const VMStateDescription vmstate_ghes = {
 static bool ghes_needed(void *opaque)
 {
     AcpiGedState *s = opaque;
-    return s->ghes_state.ghes_addr_le;
+    return s->ghes_state.hw_error_le;
 }
 
 static const VMStateDescription vmstate_ghes_state = {
hw/acpi/ghes.c +2 -2
index 52c2b69d3664..90d76b9c2d8c 100644
@@ -359,7 +359,7 @@ void acpi_ghes_add_fw_cfg(AcpiGhesState *ags, FWCfgState *s,
 
     /* Create a read-write fw_cfg file for Address */
     fw_cfg_add_file_callback(s, ACPI_HW_ERROR_ADDR_FW_CFG_FILE, NULL, NULL,
-        NULL, &(ags->ghes_addr_le), sizeof(ags->ghes_addr_le), false);
+        NULL, &(ags->hw_error_le), sizeof(ags->hw_error_le), false);
 
     ags->present = true;
 }
@@ -385,7 +385,7 @@ void ghes_record_cper_errors(const void *cper, size_t len,
     }
     ags = &acpi_ged_state->ghes_state;
 
-    start_addr = le64_to_cpu(ags->ghes_addr_le);
+    start_addr = le64_to_cpu(ags->hw_error_le);
 
     start_addr += source_id * sizeof(uint64_t);
 
include/hw/acpi/ghes.h +1 -1
index 21666a4bcc8b..39619a2457cb 100644
@@ -65,7 +65,7 @@ enum {
 };
 
 typedef struct AcpiGhesState {
-    uint64_t ghes_addr_le;
+    uint64_t hw_error_le;
     bool present; /* True if GHES is present at all on this board */
 } AcpiGhesState;
 
#20 lore raw

Re: [PATCH v5 13/16] acpi/ghes: better name the offset of the hardware error firmware

Em Wed, 4 Dec 2024 17:37:59 +0100
Igor Mammedov <[email protected]> escreveu:

Quoted 11 lines
Quoted 1 line · On Wed, 4 Dec 2024 08:41:21 +0100 Mauro Carvalho Chehab…

The hardware error firmware is where HEST error structures are

      ^^^^^^^^^^^^^^^^^^^^^^^ I can't parse this, suspect you've meant something else here
Quoted 5 lines

stored. Those can be GHESv2, but they can also be other types.

Better name the location of the hardware error.

No functional changes.

I meant this fw_cfg file:
#define ACPI_HW_ERROR_FW_CFG_FILE "etc/hardware_errors"
#define ACPI_HW_ERROR_ADDR_FW_CFG_FILE "etc/hardware_errors_addr"

What about changing description to:

The etc/hardware_errors fw_cfg file is where the HEST error source structures are stored. Those can be GHESv2, but they can also be other types.

For more details about error source structure, see:
https://uefi.org/specs/ACPI/6.5/18_Platform_Error_Interfaces.html#acpi-error-source

Better name the address variable from ghes_error_le to hw_error_le to better reflect that.

No functional changes.

Quoted 61 lines
Quoted 61 lines
---
 hw/acpi/generic_event_device.c | 4 ++--
 hw/acpi/ghes.c                 | 4 ++--
 include/hw/acpi/ghes.h         | 2 +-
 3 files changed, 5 insertions(+), 5 deletions(-)
hw/acpi/generic_event_device.c +2 -2
index 663d9cb09380..17baf36132a8 100644
@@ -364,7 +364,7 @@ static const VMStateDescription vmstate_ghes = {
     .version_id = 1,
     .minimum_version_id = 1,
     .fields = (const VMStateField[]) {
-        VMSTATE_UINT64(ghes_addr_le, AcpiGhesState),
+        VMSTATE_UINT64(hw_error_le, AcpiGhesState),
         VMSTATE_END_OF_LIST()
     },
 };
@@ -372,7 +372,7 @@ static const VMStateDescription vmstate_ghes = {
 static bool ghes_needed(void *opaque)
 {
     AcpiGedState *s = opaque;
-    return s->ghes_state.ghes_addr_le;
+    return s->ghes_state.hw_error_le;
 }
 
 static const VMStateDescription vmstate_ghes_state = {
hw/acpi/ghes.c +2 -2
index 52c2b69d3664..90d76b9c2d8c 100644
@@ -359,7 +359,7 @@ void acpi_ghes_add_fw_cfg(AcpiGhesState *ags, FWCfgState *s,
 
     /* Create a read-write fw_cfg file for Address */
     fw_cfg_add_file_callback(s, ACPI_HW_ERROR_ADDR_FW_CFG_FILE, NULL, NULL,
-        NULL, &(ags->ghes_addr_le), sizeof(ags->ghes_addr_le), false);
+        NULL, &(ags->hw_error_le), sizeof(ags->hw_error_le), false);
 
     ags->present = true;
 }
@@ -385,7 +385,7 @@ void ghes_record_cper_errors(const void *cper, size_t len,
     }
     ags = &acpi_ged_state->ghes_state;
 
-    start_addr = le64_to_cpu(ags->ghes_addr_le);
+    start_addr = le64_to_cpu(ags->hw_error_le);
 
     start_addr += source_id * sizeof(uint64_t);
 
include/hw/acpi/ghes.h +0 -0
index 21666a4bcc8b..39619a2457cb 100644
@@ -65,7 +65,7 @@ enum {
 };
 
Quoted 7 lines

include/hw/acpi/ghes.h enum { · line 71

Quoted 6 lines
include/hw/acpi/ghes.h +1 -1
 typedef struct AcpiGhesState {
-    uint64_t ghes_addr_le;
+    uint64_t hw_error_le;
     bool present; /* True if GHES is present at all on this board */
 } AcpiGhesState;
 

Thanks,
Mauro

#21 lore raw

Re: [PATCH v5 13/16] acpi/ghes: better name the offset of the hardware error firmware

Quoted 19 lines · On Thu, 5 Dec 2024 08:59:59 +0100 Mauro Carvalho Chehab…

Em Wed, 4 Dec 2024 17:37:59 +0100
Igor Mammedov <[email protected]> escreveu:

Quoted 11 lines
Quoted 1 line · On Wed, 4 Dec 2024 08:41:21 +0100 Mauro Carvalho Chehab…

The hardware error firmware is where HEST error structures are

      ^^^^^^^^^^^^^^^^^^^^^^^ I can't parse this, suspect you've meant something else here
Quoted 5 lines

stored. Those can be GHESv2, but they can also be other types.

Better name the location of the hardware error.

No functional changes.

I meant this fw_cfg file:
#define ACPI_HW_ERROR_FW_CFG_FILE "etc/hardware_errors"
#define ACPI_HW_ERROR_ADDR_FW_CFG_FILE "etc/hardware_errors_addr"

Quoted 5 lines

What about changing description to:

The etc/hardware_errors fw_cfg file is where the HEST error source structures are stored. Those can be GHESv2, but they can also be other types.

As I understand it, etc/hardware_errors is a blob
for '18.3.2.7.1. Generic Error Data' with some extra fields to accommodate GHESv2 handling (i.e. err addr indirection and ack reg).

While error sources are described in HEST (and only GHES ones would reference etc/hardware_errors via error status addr/read ack register addr)

Quoted 83 lines

For more details about error source structure, see:
https://uefi.org/specs/ACPI/6.5/18_Platform_Error_Interfaces.html#acpi-error-source

Better name the address variable from ghes_error_le to hw_error_le to better reflect that.

No functional changes.

Quoted 61 lines
Quoted 61 lines
---
 hw/acpi/generic_event_device.c | 4 ++--
 hw/acpi/ghes.c                 | 4 ++--
 include/hw/acpi/ghes.h         | 2 +-
 3 files changed, 5 insertions(+), 5 deletions(-)
hw/acpi/generic_event_device.c +2 -2
index 663d9cb09380..17baf36132a8 100644
@@ -364,7 +364,7 @@ static const VMStateDescription vmstate_ghes = {
     .version_id = 1,
     .minimum_version_id = 1,
     .fields = (const VMStateField[]) {
-        VMSTATE_UINT64(ghes_addr_le, AcpiGhesState),
+        VMSTATE_UINT64(hw_error_le, AcpiGhesState),
         VMSTATE_END_OF_LIST()
     },
 };
@@ -372,7 +372,7 @@ static const VMStateDescription vmstate_ghes = {
 static bool ghes_needed(void *opaque)
 {
     AcpiGedState *s = opaque;
-    return s->ghes_state.ghes_addr_le;
+    return s->ghes_state.hw_error_le;
 }
 
 static const VMStateDescription vmstate_ghes_state = {
hw/acpi/ghes.c +2 -2
index 52c2b69d3664..90d76b9c2d8c 100644
@@ -359,7 +359,7 @@ void acpi_ghes_add_fw_cfg(AcpiGhesState *ags, FWCfgState *s,
 
     /* Create a read-write fw_cfg file for Address */
     fw_cfg_add_file_callback(s, ACPI_HW_ERROR_ADDR_FW_CFG_FILE, NULL, NULL,
-        NULL, &(ags->ghes_addr_le), sizeof(ags->ghes_addr_le), false);
+        NULL, &(ags->hw_error_le), sizeof(ags->hw_error_le), false);
 
     ags->present = true;
 }
@@ -385,7 +385,7 @@ void ghes_record_cper_errors(const void *cper, size_t len,
     }
     ags = &acpi_ged_state->ghes_state;
 
-    start_addr = le64_to_cpu(ags->ghes_addr_le);
+    start_addr = le64_to_cpu(ags->hw_error_le);
 
     start_addr += source_id * sizeof(uint64_t);
 
include/hw/acpi/ghes.h +0 -0
index 21666a4bcc8b..39619a2457cb 100644
@@ -65,7 +65,7 @@ enum {
 };
 
Quoted 7 lines

include/hw/acpi/ghes.h enum { · line 71

Quoted 6 lines
include/hw/acpi/ghes.h +1 -1
 typedef struct AcpiGhesState {
-    uint64_t ghes_addr_le;
+    uint64_t hw_error_le;
     bool present; /* True if GHES is present at all on this board */
 } AcpiGhesState;
 

Thanks,
Mauro

#22 lore raw

Re: [PATCH v5 13/16] acpi/ghes: better name the offset of the hardware error firmware

Em Thu, 5 Dec 2024 10:22:19 +0100
Igor Mammedov <[email protected]> escreveu:

Quoted 28 lines
Quoted 19 lines · On Thu, 5 Dec 2024 08:59:59 +0100 Mauro Carvalho Chehab…

Em Wed, 4 Dec 2024 17:37:59 +0100
Igor Mammedov <[email protected]> escreveu:

Quoted 11 lines
Quoted 1 line · On Wed, 4 Dec 2024 08:41:21 +0100 Mauro Carvalho Chehab…

The hardware error firmware is where HEST error structures are

      ^^^^^^^^^^^^^^^^^^^^^^^ I can't parse this, suspect you've meant something else here
Quoted 5 lines

stored. Those can be GHESv2, but they can also be other types.

Better name the location of the hardware error.

No functional changes.

I meant this fw_cfg file:
#define ACPI_HW_ERROR_FW_CFG_FILE "etc/hardware_errors"
#define ACPI_HW_ERROR_ADDR_FW_CFG_FILE "etc/hardware_errors_addr"

Quoted 5 lines

What about changing description to:

The etc/hardware_errors fw_cfg file is where the HEST error source structures are stored. Those can be GHESv2, but they can also be other types.

Quoted 6 lines

As I understand it, etc/hardware_errors is a blob
for '18.3.2.7.1. Generic Error Data' with some extra fields to accommodate GHESv2 handling (i.e. err addr indirection and ack reg).

While error sources are described in HEST (and only GHES ones would reference etc/hardware_errors via error status addr/read ack register addr)

Yeah, what it is stored there is not the error source structures themselves, but the additional address data they contain. For GHESv2, such data is the Error Status Address (where CPER data is stored) and the Read Ack Register.

Currently, only GHES (type 9) and GHESv2 (type 10) have those Generic Address Structure stored there.

What about then:

The etc/hardware_errors fw_cfg file is where the HEST error source structures store registers pointed by Generic Address Structures, as defined at:

https://uefi.org/specs/ACPI/6.5/18_Platform_Error_Interfaces.html#generic-error-data-entry

and

https://uefi.org/specs/ACPI/6.5/18_Platform_Error_Interfaces.html#generic-hardware-error-source-version-2-ghesv2-structure

As the name of the firmware file is hardware_errors, better name the variable where the offset pointing to it will be stored from ghes_error_le to hw_error_le.

No functional changes.

Regards,
Mauro

Quoted 81 lines
Quoted 81 lines

For more details about error source structure, see:
https://uefi.org/specs/ACPI/6.5/18_Platform_Error_Interfaces.html#acpi-error-source

Better name the address variable from ghes_error_le to hw_error_le to better reflect that.

No functional changes.

Quoted 68 lines
Quoted 67 lines
---
 hw/acpi/generic_event_device.c | 4 ++--
 hw/acpi/ghes.c                 | 4 ++--
 include/hw/acpi/ghes.h         | 2 +-
 3 files changed, 5 insertions(+), 5 deletions(-)
hw/acpi/generic_event_device.c +2 -2
index 663d9cb09380..17baf36132a8 100644
@@ -364,7 +364,7 @@ static const VMStateDescription vmstate_ghes = {
     .version_id = 1,
     .minimum_version_id = 1,
     .fields = (const VMStateField[]) {
-        VMSTATE_UINT64(ghes_addr_le, AcpiGhesState),
+        VMSTATE_UINT64(hw_error_le, AcpiGhesState),
         VMSTATE_END_OF_LIST()
     },
 };
@@ -372,7 +372,7 @@ static const VMStateDescription vmstate_ghes = {
 static bool ghes_needed(void *opaque)
 {
     AcpiGedState *s = opaque;
-    return s->ghes_state.ghes_addr_le;
+    return s->ghes_state.hw_error_le;
 }
 
 static const VMStateDescription vmstate_ghes_state = {
hw/acpi/ghes.c +2 -2
index 52c2b69d3664..90d76b9c2d8c 100644
@@ -359,7 +359,7 @@ void acpi_ghes_add_fw_cfg(AcpiGhesState *ags, FWCfgState *s,
 
     /* Create a read-write fw_cfg file for Address */
     fw_cfg_add_file_callback(s, ACPI_HW_ERROR_ADDR_FW_CFG_FILE, NULL, NULL,
-        NULL, &(ags->ghes_addr_le), sizeof(ags->ghes_addr_le), false);
+        NULL, &(ags->hw_error_le), sizeof(ags->hw_error_le), false);
 
     ags->present = true;
 }
@@ -385,7 +385,7 @@ void ghes_record_cper_errors(const void *cper, size_t len,
     }
     ags = &acpi_ged_state->ghes_state;
 
-    start_addr = le64_to_cpu(ags->ghes_addr_le);
+    start_addr = le64_to_cpu(ags->hw_error_le);
 
     start_addr += source_id * sizeof(uint64_t);
 
include/hw/acpi/ghes.h +1 -1
index 21666a4bcc8b..39619a2457cb 100644
@@ -65,7 +65,7 @@ enum {
 };
 
 typedef struct AcpiGhesState {
-    uint64_t ghes_addr_le;
+    uint64_t hw_error_le;
     bool present; /* True if GHES is present at all on this board */
 } AcpiGhesState;
 
Quoted 4 lines
Quoted 3 lines

Thanks,
Mauro

Thanks,
Mauro

#23 lore raw

PATCH v5 14/16 acpi/ghes: move offset calculus to a separate function

In reply to Mauro Carvalho Chehab

Currently, CPER address location is calculated as an offset of the hardware_errors table. It is also badly named, as the offset actually used is the address where the CPER data starts, and not the beginning of the error source.

Move the logic which calculates such offset to a separate function, in preparation for a patch that will be changing the logic to calculate it from the HEST table.

While here, properly name the variable which stores the cper address.

---
 hw/acpi/ghes.c | 40 +++++++++++++++++++++++++++++++---------
 1 file changed, 31 insertions(+), 9 deletions(-)
hw/acpi/ghes.c +31 -9
index 90d76b9c2d8c..a4453ee357bc 100644
@@ -364,10 +364,37 @@ void acpi_ghes_add_fw_cfg(AcpiGhesState *ags, FWCfgState *s,
     ags->present = true;
 }
 
+static void get_hw_error_offsets(uint64_t ghes_addr,
+                                 uint64_t *cper_addr,
+                                 uint64_t *read_ack_register_addr)
+{
+    if (!ghes_addr) {
+        return;
+    }
+
+    /*
+     * non-HEST version supports only one source, so no need to change
+     * the start offset based on the source ID. Also, we can't validate
+     * the source ID, as it is stored inside the HEST table.
+     */
+
+    cpu_physical_memory_read(ghes_addr, cper_addr,
+                             sizeof(*cper_addr));
+
+    *cper_addr = le64_to_cpu(*cper_addr);
+
+    /*
+     * As the current version supports only one source, the ack offset is
+     * just sizeof(uint64_t).
+     */
+    *read_ack_register_addr = ghes_addr +
+			      ACPI_GHES_ERROR_SOURCE_COUNT * sizeof(uint64_t);
+}
+
 void ghes_record_cper_errors(const void *cper, size_t len,
                              uint16_t source_id, Error **errp)
 {
-    uint64_t error_block_addr, read_ack_register_addr, read_ack_register = 0;
+    uint64_t cper_addr = 0, read_ack_register_addr = 0, read_ack_register;
     uint64_t start_addr;
     AcpiGedState *acpi_ged_state;
     AcpiGhesState *ags;
@@ -389,18 +416,13 @@ void ghes_record_cper_errors(const void *cper, size_t len,
 
     start_addr += source_id * sizeof(uint64_t);
 
-    cpu_physical_memory_read(start_addr, &error_block_addr,
-                             sizeof(error_block_addr));
+    get_hw_error_offsets(start_addr, &cper_addr, &read_ack_register_addr);
 
-    error_block_addr = le64_to_cpu(error_block_addr);
-    if (!error_block_addr) {
+    if (!cper_addr) {
         error_setg(errp, "can not find Generic Error Status Block");
         return;
     }
 
-    read_ack_register_addr = start_addr +
-                             ACPI_GHES_ERROR_SOURCE_COUNT * sizeof(uint64_t);
-
     cpu_physical_memory_read(read_ack_register_addr,
                              &read_ack_register, sizeof(read_ack_register));
 
@@ -421,7 +443,7 @@ void ghes_record_cper_errors(const void *cper, size_t len,
         &read_ack_register, sizeof(uint64_t));
 
     /* Write the generic error data entry into guest memory */
-    cpu_physical_memory_write(error_block_addr, cper, len);
+    cpu_physical_memory_write(cper_addr, cper, len);
 
     return;
 }
Signature · 1 line
2.47.1
Reviewed-by on v5 14/16
#24 lore raw

Re: [PATCH v5 14/16] acpi/ghes: move offset calculus to a separate function

Quoted 9 lines · On Wed, 4 Dec 2024 08:41:22 +0100 Mauro Carvalho Chehab…

Currently, CPER address location is calculated as an offset of the hardware_errors table. It is also badly named, as the offset actually used is the address where the CPER data starts, and not the beginning of the error source.

Move the logic which calculates such offset to a separate function, in preparation for a patch that will be changing the logic to calculate it from the HEST table.

Quoted 5 lines

While here, properly name the variable which stores the cper address.

Quoted 77 lines
---
 hw/acpi/ghes.c | 40 +++++++++++++++++++++++++++++++---------
 1 file changed, 31 insertions(+), 9 deletions(-)
hw/acpi/ghes.c +31 -9
index 90d76b9c2d8c..a4453ee357bc 100644
@@ -364,10 +364,37 @@ void acpi_ghes_add_fw_cfg(AcpiGhesState *ags, FWCfgState *s,
     ags->present = true;
 }
 
+static void get_hw_error_offsets(uint64_t ghes_addr,
+                                 uint64_t *cper_addr,
+                                 uint64_t *read_ack_register_addr)
+{
+    if (!ghes_addr) {
+        return;
+    }
+
+    /*
+     * non-HEST version supports only one source, so no need to change
+     * the start offset based on the source ID. Also, we can't validate
+     * the source ID, as it is stored inside the HEST table.
+     */
+
+    cpu_physical_memory_read(ghes_addr, cper_addr,
+                             sizeof(*cper_addr));
+
+    *cper_addr = le64_to_cpu(*cper_addr);
+
+    /*
+     * As the current version supports only one source, the ack offset is
+     * just sizeof(uint64_t).
+     */
+    *read_ack_register_addr = ghes_addr +
+			      ACPI_GHES_ERROR_SOURCE_COUNT * sizeof(uint64_t);
+}
+
 void ghes_record_cper_errors(const void *cper, size_t len,
                              uint16_t source_id, Error **errp)
 {
-    uint64_t error_block_addr, read_ack_register_addr, read_ack_register = 0;
+    uint64_t cper_addr = 0, read_ack_register_addr = 0, read_ack_register;
     uint64_t start_addr;
     AcpiGedState *acpi_ged_state;
     AcpiGhesState *ags;
@@ -389,18 +416,13 @@ void ghes_record_cper_errors(const void *cper, size_t len,
 
     start_addr += source_id * sizeof(uint64_t);
 
-    cpu_physical_memory_read(start_addr, &error_block_addr,
-                             sizeof(error_block_addr));
+    get_hw_error_offsets(start_addr, &cper_addr, &read_ack_register_addr);
 
-    error_block_addr = le64_to_cpu(error_block_addr);
-    if (!error_block_addr) {
+    if (!cper_addr) {
         error_setg(errp, "can not find Generic Error Status Block");
         return;
     }
 
-    read_ack_register_addr = start_addr +
-                             ACPI_GHES_ERROR_SOURCE_COUNT * sizeof(uint64_t);
-
     cpu_physical_memory_read(read_ack_register_addr,
                              &read_ack_register, sizeof(read_ack_register));
 
@@ -421,7 +443,7 @@ void ghes_record_cper_errors(const void *cper, size_t len,
         &read_ack_register, sizeof(uint64_t));
 
     /* Write the generic error data entry into guest memory */
-    cpu_physical_memory_write(error_block_addr, cper, len);
+    cpu_physical_memory_write(cper_addr, cper, len);
 
     return;
 }
#25 lore raw

PATCH v5 15/16 acpi/ghes: Change ghes fill logic to work with only one source

In reply to Mauro Carvalho Chehab

Extending to multiple sources require a BIOS pointer to the beginning of the HEST table, which in turn requires a backward-compatible code.

So, the current code supports only one source. Ensure that and simplify the code.

---
 hw/acpi/ghes.c | 12 ++++--------
 1 file changed, 4 insertions(+), 8 deletions(-)
hw/acpi/ghes.c +4 -8
index a4453ee357bc..5efa50413af3 100644
@@ -387,15 +387,13 @@ static void get_hw_error_offsets(uint64_t ghes_addr,
      * As the current version supports only one source, the ack offset is
      * just sizeof(uint64_t).
      */
-    *read_ack_register_addr = ghes_addr +
-			      ACPI_GHES_ERROR_SOURCE_COUNT * sizeof(uint64_t);
+    *read_ack_register_addr = ghes_addr + sizeof(uint64_t);
 }
 
 void ghes_record_cper_errors(const void *cper, size_t len,
                              uint16_t source_id, Error **errp)
 {
     uint64_t cper_addr = 0, read_ack_register_addr = 0, read_ack_register;
-    uint64_t start_addr;
     AcpiGedState *acpi_ged_state;
     AcpiGhesState *ags;
 
@@ -412,11 +410,9 @@ void ghes_record_cper_errors(const void *cper, size_t len,
     }
     ags = &acpi_ged_state->ghes_state;
 
-    start_addr = le64_to_cpu(ags->hw_error_le);
-
-    start_addr += source_id * sizeof(uint64_t);
-
-    get_hw_error_offsets(start_addr, &cper_addr, &read_ack_register_addr);
+    assert(ACPI_GHES_ERROR_SOURCE_COUNT == 1);
+    get_hw_error_offsets(le64_to_cpu(ags->hw_error_le),
+                         &cper_addr, &read_ack_register_addr);
 
     if (!cper_addr) {
         error_setg(errp, "can not find Generic Error Status Block");
Signature · 1 line
2.47.1
#26 lore raw

PATCH v5 16/16 docs: acpi_hest_ghes: fix documentation for CPER size

In reply to Mauro Carvalho Chehab

While the spec defines a CPER size of 4KiB for each record, currently it is set to 1KiB. Fix the documentation and add a pointer to the macro name there, as this may help to keep it updated.

---
 docs/specs/acpi_hest_ghes.rst | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)
docs/specs/acpi_hest_ghes.rst +4 -2
index 68f1fbe0a4af..c3e9f8d9a702 100644
@@ -67,8 +67,10 @@ Design Details
 (3) The address registers table contains N Error Block Address entries
     and N Read Ack Register entries. The size for each entry is 8-byte.
     The Error Status Data Block table contains N Error Status Data Block
-    entries. The size for each entry is 4096(0x1000) bytes. The total size
-    for the "etc/hardware_errors" fw_cfg blob is (N * 8 * 2 + N * 4096) bytes.
+    entries. The size for each entry is defined at the source code as
+    ACPI_GHES_MAX_RAW_DATA_LENGTH (currently 1024 bytes). The total size
+    for the "etc/hardware_errors" fw_cfg blob is
+    (N * 8 * 2 + N * ACPI_GHES_MAX_RAW_DATA_LENGTH) bytes.
     N is the number of the kinds of hardware error sources.
 
 (4) QEMU generates the ACPI linker/loader script for the firmware. The
Signature · 1 line
2.47.1