Skip to contentSkip to conversation

rockchip: Add support for Radxa ROCK 5C

PATCH Superseded FUKAUMI Naoki 3 participants 15 messages Dec 11, 2024 – Jan 3, 2025

Subsystems (3)

v3 of 5 Superseded Latest is v5 →

lore
Share & tools
lore
#0 lore raw

v3 cover rockchip: Add support for Radxa ROCK 5C

Radxa ROCK 5C is a Rockchip RK3588S2 based single board computer.

Cristian Ciocaltea (1):
arm64: dts: rockchip: Add HDMI0 node to rk3588

FUKAUMI Naoki (3):
arm64: dts: rockchip: enable PCIe on M.2 E key for Radxa ROCK 5A
arm64: dts: rockchip: add Radxa ROCK 5C
rockchip: Add support for Radxa ROCK 5C

Sam Edwards (1):
arm64: dts: rockchip: Split up RK3588's PCIe pinctrls

 arch/arm/dts/rk3588s-rock-5-u-boot.dtsi       |  16 +
 arch/arm/dts/rk3588s-rock-5c-u-boot.dtsi      |   6 +
 arch/arm/mach-rockchip/rk3588/Kconfig         |   7 +
 board/radxa/rock-5-rk3588s/Kconfig            |  12 +
 board/radxa/rock-5-rk3588s/MAINTAINERS        |   8 +
 board/radxa/rock-5-rk3588s/Makefile           |   3 +
 board/radxa/rock-5-rk3588s/rock-5-rk3588s.c   |  77 ++
 configs/rock-5-rk3588s_defconfig              |  94 ++
 doc/board/rockchip/rockchip.rst               |   1 +
 .../arm64/rockchip/rk3588-base-pinctrl.dtsi   | 271 +++++-
 .../src/arm64/rockchip/rk3588-base.dtsi       |  41 +
 .../src/arm64/rockchip/rk3588s-rock-5a.dts    |  34 +
 .../src/arm64/rockchip/rk3588s-rock-5c.dts    | 920 ++++++++++++++++++
 include/configs/rock-5-rk3588s.h              |  15 +
 14 files changed, 1457 insertions(+), 48 deletions(-)
 create mode 100644 arch/arm/dts/rk3588s-rock-5-u-boot.dtsi
 create mode 100644 arch/arm/dts/rk3588s-rock-5c-u-boot.dtsi
 create mode 100644 board/radxa/rock-5-rk3588s/Kconfig
 create mode 100644 board/radxa/rock-5-rk3588s/MAINTAINERS
 create mode 100644 board/radxa/rock-5-rk3588s/Makefile
 create mode 100644 board/radxa/rock-5-rk3588s/rock-5-rk3588s.c
 create mode 100644 configs/rock-5-rk3588s_defconfig
 create mode 100644 dts/upstream/src/arm64/rockchip/rk3588s-rock-5c.dts
 create mode 100644 include/configs/rock-5-rk3588s.h
Signature · 1 line
2.43.0
#1 lore raw

PATCH v3 1/5 arm64: dts: rockchip: enable PCIe on M.2 E key for Radxa ROCK 5A

Enable pcie2x1l2 and related combphy/regulator routed to M.2 E key connector on Radxa ROCK 5A.

Tested with Radxa Wireless Module A8:

$ lspci
0004:40:00.0 PCI bridge: Rockchip Electronics Co., Ltd RK3588 (rev 01)
0004:41:00.0 Network controller: Realtek Semiconductor Co., Ltd. RTL8852BE PCIe 802.11ax Wireless Network Controller
$ ip l
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN mode DEFAULT group default qlen 1000
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
2: end0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP mode DEFAULT group default qlen 1000
    link/ether c2:58:fc:70:55:86 brd ff:ff:ff:ff:ff:ff
3: wlP4p65s0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN mode DEFAULT group default qlen 1000
    link/ether 2c:05:47:65:5b:ed brd ff:ff:ff:ff:ff:ff
$ lsusb
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 002: ID 1a40:0101 Terminus Technology Inc. Hub
Bus 001 Device 003: ID 0bda:b85b Realtek Semiconductor Corp. Bluetooth Radio
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 005 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 006 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 006 Device 002: ID 0789:0336 Logitec Corp. LMD USB Device
Bus 007 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 008 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
$ hciconfig
hci0:	Type: Primary  Bus: USB
	BD Address: 2C:05:47:65:5B:EE  ACL MTU: 1021:6  SCO MTU: 255:12
	UP RUNNING
	RX bytes:2698 acl:0 sco:0 events:329 errors:0
	TX bytes:69393 acl:0 sco:0 commands:329 errors:0
(cherry picked from commit b728d4c51f0ce9207daf502f3a85073785c46319)
---
 .../src/arm64/rockchip/rk3588s-rock-5a.dts    | 30 +++++++++++++++++++
 1 file changed, 30 insertions(+)
dts/upstream/src/arm64/rockchip/rk3588s-rock-5a.dts +30 -0
index 03ed48246d36..a385e0991990 100644
@@ -65,6 +65,18 @@
 		regulator-max-microvolt = <12000000>;
 	};
 
+	vcc3v3_wf: vcc3v3-wf-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v3_wf";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		enable-active-high;
+		gpio = <&gpio0 RK_PC5 GPIO_ACTIVE_HIGH>;
+		pinctrl-0 = <&pow_en>;
+		pinctrl-names = "default";
+		vin-supply = <&vcc5v0_sys>;
+	};
+
 	vcc5v0_host: vcc5v0-host-regulator {
 		compatible = "regulator-fixed";
 		regulator-name = "vcc5v0_host";
@@ -114,6 +126,10 @@
 	};
 };
 
+&combphy0_ps {
+	status = "okay";
+};
+
 &combphy2_psu {
 	status = "okay";
 };
@@ -293,6 +309,14 @@
 	};
 };
 
+&pcie2x1l2 {
+	pinctrl-0 = <&pcie20x1m0_pins>;
+	pinctrl-names = "default";
+	reset-gpios = <&gpio3 RK_PD1 GPIO_ACTIVE_HIGH>;
+	vpcie3v3-supply = <&vcc3v3_wf>;
+	status = "okay";
+};
+
 &pinctrl {
 	leds {
 		io_led: io-led {
@@ -300,6 +324,12 @@
 		};
 	};
 
+	pcie {
+		pow_en: pow-en {
+			rockchip,pins = <0 RK_PC5 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
 	power {
 		vcc_5v0_en: vcc-5v0-en {
 			rockchip,pins = <4 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>;
Signature · 1 line
2.43.0
#2 lore raw

PATCH v3 2/5 arm64: dts: rockchip: Split up RK3588's PCIe pinctrls

In reply to FUKAUMI Naoki

From: Sam Edwards <[email protected]>

These pinctrls manage the low-speed PCIe signals:
- CLKREQ#: An output on the RK3588 (both RC or EP modes), used to request that external clock-generation circuitry provide a clock.
- PERST#: An input on the RK3588 in EP mode, used to detect a reset signal from the RC. In RC mode, the hardware does not use this signal:
Linux itself generates it by putting the pin in GPIO mode.
- WAKE#: In EP mode, this is an output; in RC mode, this is an input.

Each of these signals serves a distinct purpose, and more importantly, PERST# should not be muxed when the RK3588 is in the RC role. Bundling them together in pinctrl groups prevents proper use: indeed, almost none of the current board-specific .dts files make any use of them. (Exception: Rock 5A recently had a patch land that misuses _pins; this
patch corrects that.)

However, on some RK3588 boards, the PCIe 3 controller will indefinitely stall the boot if CLKREQ# is not muxed (details in the next patch). This patch unbundles the signals to allow them to be used.

(cherry picked from commit 4294e32111781b3de4d73b944cbd1bc1662a9a7a)
---
 .../arm64/rockchip/rk3588-base-pinctrl.dtsi   | 271 ++++++++++++++----
 .../src/arm64/rockchip/rk3588s-rock-5a.dts    |   6 +-
 2 files changed, 228 insertions(+), 49 deletions(-)
dts/upstream/src/arm64/rockchip/rk3588-base-pinctrl.dtsi +223 -48
index 30db12c4fc82..b12562e9a985 100644
@@ -1612,23 +1612,43 @@
 
 	pcie20x1 {
 		/omit-if-no-ref/
-		pcie20x1m0_pins: pcie20x1m0-pins {
+		pcie20x1m0_clkreqn: pcie20x1m0-clkreqn {
 			rockchip,pins =
 				/* pcie20x1_2_clkreqn_m0 */
-				<3 RK_PC7 4 &pcfg_pull_none>,
+				<3 RK_PC7 4 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		pcie20x1m0_perstn: pcie20x1m0-perstn {
+			rockchip,pins =
 				/* pcie20x1_2_perstn_m0 */
-				<3 RK_PD1 4 &pcfg_pull_none>,
+				<3 RK_PD1 4 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		pcie20x1m0_waken: pcie20x1m0-waken {
+			rockchip,pins =
 				/* pcie20x1_2_waken_m0 */
 				<3 RK_PD0 4 &pcfg_pull_none>;
 		};
 
 		/omit-if-no-ref/
-		pcie20x1m1_pins: pcie20x1m1-pins {
+		pcie20x1m1_clkreqn: pcie20x1m1-clkreqn {
 			rockchip,pins =
 				/* pcie20x1_2_clkreqn_m1 */
-				<4 RK_PB7 4 &pcfg_pull_none>,
+				<4 RK_PB7 4 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		pcie20x1m1_perstn: pcie20x1m1-perstn {
+			rockchip,pins =
 				/* pcie20x1_2_perstn_m1 */
-				<4 RK_PC1 4 &pcfg_pull_none>,
+				<4 RK_PC1 4 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		pcie20x1m1_waken: pcie20x1m1-waken {
+			rockchip,pins =
 				/* pcie20x1_2_waken_m1 */
 				<4 RK_PC0 4 &pcfg_pull_none>;
 		};
@@ -1654,52 +1674,127 @@
 
 	pcie30x1 {
 		/omit-if-no-ref/
-		pcie30x1m0_pins: pcie30x1m0-pins {
+		pcie30x1m0_0_clkreqn: pcie30x1m0-0-clkreqn {
 			rockchip,pins =
 				/* pcie30x1_0_clkreqn_m0 */
-				<0 RK_PC0 12 &pcfg_pull_none>,
+				<0 RK_PC0 12 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		pcie30x1m0_0_perstn: pcie30x1m0-0-perstn {
+			rockchip,pins =
 				/* pcie30x1_0_perstn_m0 */
-				<0 RK_PC5 12 &pcfg_pull_none>,
+				<0 RK_PC5 12 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		pcie30x1m0_0_waken: pcie30x1m0-0-waken {
+			rockchip,pins =
 				/* pcie30x1_0_waken_m0 */
-				<0 RK_PC4 12 &pcfg_pull_none>,
+				<0 RK_PC4 12 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		pcie30x1m0_1_clkreqn: pcie30x1m0-1-clkreqn {
+			rockchip,pins =
 				/* pcie30x1_1_clkreqn_m0 */
-				<0 RK_PB5 12 &pcfg_pull_none>,
+				<0 RK_PB5 12 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		pcie30x1m0_1_perstn: pcie30x1m0-1-perstn {
+			rockchip,pins =
 				/* pcie30x1_1_perstn_m0 */
-				<0 RK_PB7 12 &pcfg_pull_none>,
+				<0 RK_PB7 12 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		pcie30x1m0_1_waken: pcie30x1m0-1-waken {
+			rockchip,pins =
 				/* pcie30x1_1_waken_m0 */
 				<0 RK_PB6 12 &pcfg_pull_none>;
 		};
 
 		/omit-if-no-ref/
-		pcie30x1m1_pins: pcie30x1m1-pins {
+		pcie30x1m1_0_clkreqn: pcie30x1m1-0-clkreqn {
 			rockchip,pins =
 				/* pcie30x1_0_clkreqn_m1 */
-				<4 RK_PA3 4 &pcfg_pull_none>,
+				<4 RK_PA3 4 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		pcie30x1m1_0_perstn: pcie30x1m1-0-perstn {
+			rockchip,pins =
 				/* pcie30x1_0_perstn_m1 */
-				<4 RK_PA5 4 &pcfg_pull_none>,
+				<4 RK_PA5 4 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		pcie30x1m1_0_waken: pcie30x1m1-0-waken {
+			rockchip,pins =
 				/* pcie30x1_0_waken_m1 */
-				<4 RK_PA4 4 &pcfg_pull_none>,
+				<4 RK_PA4 4 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		pcie30x1m1_1_clkreqn: pcie30x1m1-1-clkreqn {
+			rockchip,pins =
 				/* pcie30x1_1_clkreqn_m1 */
-				<4 RK_PA0 4 &pcfg_pull_none>,
+				<4 RK_PA0 4 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		pcie30x1m1_1_perstn: pcie30x1m1-1-perstn {
+			rockchip,pins =
 				/* pcie30x1_1_perstn_m1 */
-				<4 RK_PA2 4 &pcfg_pull_none>,
+				<4 RK_PA2 4 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		pcie30x1m1_1_waken: pcie30x1m1-1-waken {
+			rockchip,pins =
 				/* pcie30x1_1_waken_m1 */
 				<4 RK_PA1 4 &pcfg_pull_none>;
 		};
 
 		/omit-if-no-ref/
-		pcie30x1m2_pins: pcie30x1m2-pins {
+		pcie30x1m2_0_clkreqn: pcie30x1m2-0-clkreqn {
 			rockchip,pins =
 				/* pcie30x1_0_clkreqn_m2 */
-				<1 RK_PB5 4 &pcfg_pull_none>,
+				<1 RK_PB5 4 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		pcie30x1m2_0_perstn: pcie30x1m2-0-perstn {
+			rockchip,pins =
 				/* pcie30x1_0_perstn_m2 */
-				<1 RK_PB4 4 &pcfg_pull_none>,
+				<1 RK_PB4 4 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		pcie30x1m2_0_waken: pcie30x1m2-0-waken {
+			rockchip,pins =
 				/* pcie30x1_0_waken_m2 */
-				<1 RK_PB3 4 &pcfg_pull_none>,
+				<1 RK_PB3 4 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		pcie30x1m2_1_clkreqn: pcie30x1m2-1-clkreqn {
+			rockchip,pins =
 				/* pcie30x1_1_clkreqn_m2 */
-				<1 RK_PA0 4 &pcfg_pull_none>,
+				<1 RK_PA0 4 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		pcie30x1m2_1_perstn: pcie30x1m2-1-perstn {
+			rockchip,pins =
 				/* pcie30x1_1_perstn_m2 */
-				<1 RK_PA7 4 &pcfg_pull_none>,
+				<1 RK_PA7 4 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		pcie30x1m2_1_waken: pcie30x1m2-1-waken {
+			rockchip,pins =
 				/* pcie30x1_1_waken_m2 */
 				<1 RK_PA1 4 &pcfg_pull_none>;
 		};
@@ -1721,45 +1816,85 @@
 
 	pcie30x2 {
 		/omit-if-no-ref/
-		pcie30x2m0_pins: pcie30x2m0-pins {
+		pcie30x2m0_clkreqn: pcie30x2m0-clkreqn {
 			rockchip,pins =
 				/* pcie30x2_clkreqn_m0 */
-				<0 RK_PD1 12 &pcfg_pull_none>,
+				<0 RK_PD1 12 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		pcie30x2m0_perstn: pcie30x2m0-perstn {
+			rockchip,pins =
 				/* pcie30x2_perstn_m0 */
-				<0 RK_PD4 12 &pcfg_pull_none>,
+				<0 RK_PD4 12 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		pcie30x2m0_waken: pcie30x2m0-waken {
+			rockchip,pins =
 				/* pcie30x2_waken_m0 */
 				<0 RK_PD2 12 &pcfg_pull_none>;
 		};
 
 		/omit-if-no-ref/
-		pcie30x2m1_pins: pcie30x2m1-pins {
+		pcie30x2m1_clkreqn: pcie30x2m1-clkreqn {
 			rockchip,pins =
 				/* pcie30x2_clkreqn_m1 */
-				<4 RK_PA6 4 &pcfg_pull_none>,
+				<4 RK_PA6 4 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		pcie30x2m1_perstn: pcie30x2m1-perstn {
+			rockchip,pins =
 				/* pcie30x2_perstn_m1 */
-				<4 RK_PB0 4 &pcfg_pull_none>,
+				<4 RK_PB0 4 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		pcie30x2m1_waken: pcie30x2m1-waken {
+			rockchip,pins =
 				/* pcie30x2_waken_m1 */
 				<4 RK_PA7 4 &pcfg_pull_none>;
 		};
 
 		/omit-if-no-ref/
-		pcie30x2m2_pins: pcie30x2m2-pins {
+		pcie30x2m2_clkreqn: pcie30x2m2-clkreqn {
 			rockchip,pins =
 				/* pcie30x2_clkreqn_m2 */
-				<3 RK_PD2 4 &pcfg_pull_none>,
+				<3 RK_PD2 4 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		pcie30x2m2_perstn: pcie30x2m2-perstn {
+			rockchip,pins =
 				/* pcie30x2_perstn_m2 */
-				<3 RK_PD4 4 &pcfg_pull_none>,
+				<3 RK_PD4 4 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		pcie30x2m2_waken: pcie30x2m2-waken {
+			rockchip,pins =
 				/* pcie30x2_waken_m2 */
 				<3 RK_PD3 4 &pcfg_pull_none>;
 		};
 
 		/omit-if-no-ref/
-		pcie30x2m3_pins: pcie30x2m3-pins {
+		pcie30x2m3_clkreqn: pcie30x2m3-clkreqn {
 			rockchip,pins =
 				/* pcie30x2_clkreqn_m3 */
-				<1 RK_PD7 4 &pcfg_pull_none>,
+				<1 RK_PD7 4 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		pcie30x2m3_perstn: pcie30x2m3-perstn {
+			rockchip,pins =
 				/* pcie30x2_perstn_m3 */
-				<1 RK_PB7 4 &pcfg_pull_none>,
+				<1 RK_PB7 4 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		pcie30x2m3_waken: pcie30x2m3-waken {
+			rockchip,pins =
 				/* pcie30x2_waken_m3 */
 				<1 RK_PB6 4 &pcfg_pull_none>;
 		};
@@ -1774,45 +1909,85 @@
 
 	pcie30x4 {
 		/omit-if-no-ref/
-		pcie30x4m0_pins: pcie30x4m0-pins {
+		pcie30x4m0_clkreqn: pcie30x4m0-clkreqn {
 			rockchip,pins =
 				/* pcie30x4_clkreqn_m0 */
-				<0 RK_PC6 12 &pcfg_pull_none>,
+				<0 RK_PC6 12 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		pcie30x4m0_perstn: pcie30x4m0-perstn {
+			rockchip,pins =
 				/* pcie30x4_perstn_m0 */
-				<0 RK_PD0 12 &pcfg_pull_none>,
+				<0 RK_PD0 12 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		pcie30x4m0_waken: pcie30x4m0-waken {
+			rockchip,pins =
 				/* pcie30x4_waken_m0 */
 				<0 RK_PC7 12 &pcfg_pull_none>;
 		};
 
 		/omit-if-no-ref/
-		pcie30x4m1_pins: pcie30x4m1-pins {
+		pcie30x4m1_clkreqn: pcie30x4m1-clkreqn {
 			rockchip,pins =
 				/* pcie30x4_clkreqn_m1 */
-				<4 RK_PB4 4 &pcfg_pull_none>,
+				<4 RK_PB4 4 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		pcie30x4m1_perstn: pcie30x4m1-perstn {
+			rockchip,pins =
 				/* pcie30x4_perstn_m1 */
-				<4 RK_PB6 4 &pcfg_pull_none>,
+				<4 RK_PB6 4 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		pcie30x4m1_waken: pcie30x4m1-waken {
+			rockchip,pins =
 				/* pcie30x4_waken_m1 */
 				<4 RK_PB5 4 &pcfg_pull_none>;
 		};
 
 		/omit-if-no-ref/
-		pcie30x4m2_pins: pcie30x4m2-pins {
+		pcie30x4m2_clkreqn: pcie30x4m2-clkreqn {
 			rockchip,pins =
 				/* pcie30x4_clkreqn_m2 */
-				<3 RK_PC4 4 &pcfg_pull_none>,
+				<3 RK_PC4 4 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		pcie30x4m2_perstn: pcie30x4m2-perstn {
+			rockchip,pins =
 				/* pcie30x4_perstn_m2 */
-				<3 RK_PC6 4 &pcfg_pull_none>,
+				<3 RK_PC6 4 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		pcie30x4m2_waken: pcie30x4m2-waken {
+			rockchip,pins =
 				/* pcie30x4_waken_m2 */
 				<3 RK_PC5 4 &pcfg_pull_none>;
 		};
 
 		/omit-if-no-ref/
-		pcie30x4m3_pins: pcie30x4m3-pins {
+		pcie30x4m3_clkreqn: pcie30x4m3-clkreqn {
 			rockchip,pins =
 				/* pcie30x4_clkreqn_m3 */
-				<1 RK_PB0 4 &pcfg_pull_none>,
+				<1 RK_PB0 4 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		pcie30x4m3_perstn: pcie30x4m3-perstn {
+			rockchip,pins =
 				/* pcie30x4_perstn_m3 */
-				<1 RK_PB2 4 &pcfg_pull_none>,
+				<1 RK_PB2 4 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		pcie30x4m3_waken: pcie30x4m3-waken {
+			rockchip,pins =
 				/* pcie30x4_waken_m3 */
 				<1 RK_PB1 4 &pcfg_pull_none>;
 		};
dts/upstream/src/arm64/rockchip/rk3588s-rock-5a.dts +5 -1
index a385e0991990..d6a0b559edca 100644
@@ -310,7 +310,7 @@
 };
 
 &pcie2x1l2 {
-	pinctrl-0 = <&pcie20x1m0_pins>;
+	pinctrl-0 = <&pcie2_reset>, <&pcie20x1m0_clkreqn>, <&pcie20x1m0_waken>;
 	pinctrl-names = "default";
 	reset-gpios = <&gpio3 RK_PD1 GPIO_ACTIVE_HIGH>;
 	vpcie3v3-supply = <&vcc3v3_wf>;
@@ -328,6 +328,10 @@
 		pow_en: pow-en {
 			rockchip,pins = <0 RK_PC5 RK_FUNC_GPIO &pcfg_pull_none>;
 		};
+
+		pcie2_reset: pcie2-reset {
+			rockchip,pins = <3 RK_PD1 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
 	};
 
 	power {
Signature · 1 line
2.43.0
#3 lore raw

PATCH v3 3/5 arm64: dts: rockchip: Add HDMI0 node to rk3588

In reply to FUKAUMI Naoki

From: Cristian Ciocaltea <[email protected]>

Add support for the HDMI0 output port found on RK3588 SoC.

(cherry picked from commit d7bb71e69f58c1b3665a9f926bf8d3855111bf8e)
---
 .../src/arm64/rockchip/rk3588-base.dtsi       | 41 +++++++++++++++++++
 1 file changed, 41 insertions(+)
dts/upstream/src/arm64/rockchip/rk3588-base.dtsi +41 -0
index ee99166ebd46..3064ecf1e22a 100644
@@ -1254,6 +1254,47 @@
 		status = "disabled";
 	};
 
+	hdmi0: hdmi@fde80000 {
+		compatible = "rockchip,rk3588-dw-hdmi-qp";
+		reg = <0x0 0xfde80000 0x0 0x20000>;
+		clocks = <&cru PCLK_HDMITX0>,
+			 <&cru CLK_HDMITX0_EARC>,
+			 <&cru CLK_HDMITX0_REF>,
+			 <&cru MCLK_I2S5_8CH_TX>,
+			 <&cru CLK_HDMIHDP0>,
+			 <&cru HCLK_VO1>;
+		clock-names = "pclk", "earc", "ref", "aud", "hdp", "hclk_vo1";
+		interrupts = <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 171 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 172 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 360 IRQ_TYPE_LEVEL_HIGH 0>;
+		interrupt-names = "avp", "cec", "earc", "main", "hpd";
+		phys = <&hdptxphy_hdmi0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&hdmim0_tx0_cec &hdmim0_tx0_hpd
+			     &hdmim0_tx0_scl &hdmim0_tx0_sda>;
+		power-domains = <&power RK3588_PD_VO1>;
+		resets = <&cru SRST_HDMITX0_REF>, <&cru SRST_HDMIHDP0>;
+		reset-names = "ref", "hdp";
+		rockchip,grf = <&sys_grf>;
+		rockchip,vo-grf = <&vo1_grf>;
+		status = "disabled";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			hdmi0_in: port@0 {
+				reg = <0>;
+			};
+
+			hdmi0_out: port@1 {
+				reg = <1>;
+			};
+		};
+	};
+
 	qos_gpu_m0: qos@fdf35000 {
 		compatible = "rockchip,rk3588-qos", "syscon";
 		reg = <0x0 0xfdf35000 0x0 0x20>;
Signature · 1 line
2.43.0
#4 lore raw

PATCH v3 4/5 arm64: dts: rockchip: add Radxa ROCK 5C

In reply to FUKAUMI Naoki

Radxa ROCK 5C is a 8K computer for everything[1] using the Rockchip RK3588S2 chip:

- Rockchip RK3588S2
- Quad A76 and Quad A55 CPU
- 6 TOPS NPU
- up to 32GB LPDDR4x RAM
- eMMC / SPI flash connector
- Micro SD Card slot
- Gigabit ethernet port (supports PoE with add-on PoE HAT)
- WiFi6 / BT5.4
- 1x USB 3.0 Type-A HOST port
- 1x USB 3.0 Type-A OTG port
- 2x USB 2.0 Type-A HOST port
- 1x USB Type-C 5V power port

[1] https://radxa.com/products/rock5/5c

[ upstream commit: 3ddf5cdb77e6efd6fe9b70f36dec935e324a3cd2 ]

(cherry picked from commit f80689fcef4b9b07a97b629b4075cc1a4c21a68e)

---
 .../src/arm64/rockchip/rk3588s-rock-5c.dts    | 920 ++++++++++++++++++
 1 file changed, 920 insertions(+)
 create mode 100644 dts/upstream/src/arm64/rockchip/rk3588s-rock-5c.dts
dts/upstream/src/arm64/rockchip/rk3588s-rock-5c.dts new file +920 -0
new file mode 100644
index 000000000000..9b14d5383cdc
@@ -0,0 +1,920 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2024 Radxa Computer (Shenzhen) Co., Ltd.
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/pinctrl/rockchip.h>
+#include <dt-bindings/soc/rockchip,vop2.h>
+#include "rk3588s.dtsi"
+
+/ {
+	model = "Radxa ROCK 5C";
+	compatible = "radxa,rock-5c", "rockchip,rk3588s";
+
+	aliases {
+		ethernet0 = &gmac1;
+		mmc0 = &sdhci;
+		mmc1 = &sdmmc;
+	};
+
+	chosen {
+		stdout-path = "serial2:1500000n8";
+	};
+
+	analog-sound {
+		compatible = "audio-graph-card";
+		label = "rk3588-es8316";
+		dais = <&i2s0_8ch_p0>;
+		routing = "MIC2", "Mic Jack",
+			  "Headphones", "HPOL",
+			  "Headphones", "HPOR";
+		widgets = "Microphone", "Mic Jack",
+			  "Headphone", "Headphones";
+	};
+
+	hdmi0-con {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi0_con_in: endpoint {
+				remote-endpoint = <&hdmi0_out_con>;
+			};
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&led_pins>;
+
+		led-0 {
+			color = <LED_COLOR_ID_GREEN>;
+			default-state = "on";
+			function = LED_FUNCTION_POWER;
+			gpios = <&gpio3 RK_PC4 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-1 {
+			color = <LED_COLOR_ID_BLUE>;
+			default-state = "on";
+			function = LED_FUNCTION_HEARTBEAT;
+			gpios = <&gpio3 RK_PD5 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	fan {
+		compatible = "pwm-fan";
+		#cooling-cells = <2>;
+		cooling-levels = <0 64 128 192 255>;
+		fan-supply = <&vcc_5v0>;
+		pwms = <&pwm3 0 10000 0>;
+	};
+
+	pcie2x1l2_3v3: regulator-pcie2x1l2-3v3 {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio0 RK_PC5 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pow_en>;
+		regulator-name = "pcie2x1l2_3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vcc_sysin>;
+	};
+
+	vcc5v_dcin: regulator-vcc5v-dcin {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v_dcin";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	vcc5v0_usb_host: regulator-vcc5v0-usb-host {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio4 RK_PB5 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&usb_host_pwren_h>;
+		regulator-name = "vcc5v0_usb_host";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vcc_sysin>;
+	};
+
+	vcc5v0_usb_otg0: regulator-vcc5v0-usb-otg0 {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio0 RK_PD4 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&usb_otg_pwren_h>;
+		regulator-name = "vcc5v0_usb_otg0";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vcc_sysin>;
+	};
+
+	vcc_1v1_nldo_s3: regulator-vcc-1v1-nldo-s3 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_1v1_nldo_s3";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <1100000>;
+		regulator-max-microvolt = <1100000>;
+		vin-supply = <&vcc_sysin>;
+	};
+
+	vcc_3v3_pmu: regulator-vcc-3v3-pmu {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_3v3_pmu";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vcc_3v3_s3>;
+	};
+
+	vcc_3v3_s0: regulator-vcc-3v3-s0 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_3v3_s0";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vcc_1v8_s0>;
+	};
+
+	vcc_5v0: regulator-vcc-5v0 {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio4 RK_PA3 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&vcc_5v0_pwren_h>;
+		regulator-name = "vcc_5v0";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vcc_sysin>;
+	};
+
+	vcc_sysin: regulator-vcc-sysin {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_sysin";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vcc5v_dcin>;
+	};
+
+	vcca: regulator-vcca {
+		compatible = "regulator-fixed";
+		regulator-name = "vcca";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <4000000>;
+		regulator-max-microvolt = <4000000>;
+		vin-supply = <&vcc_sysin>;
+	};
+
+	vdd_3v3: regulator-vdd-3v3 {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio0 RK_PA0 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&usb_wifi_pwr>;
+		regulator-name = "vdd_3v3";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vcc_3v3_s3>;
+	};
+};
+
+&combphy0_ps {
+	status = "okay";
+};
+
+&combphy2_psu {
+	status = "okay";
+};
+
+&cpu_b0 {
+	cpu-supply = <&vdd_cpu_big0_s0>;
+};
+
+&cpu_b1 {
+	cpu-supply = <&vdd_cpu_big0_s0>;
+};
+
+&cpu_b2 {
+	cpu-supply = <&vdd_cpu_big1_s0>;
+};
+
+&cpu_b3 {
+	cpu-supply = <&vdd_cpu_big1_s0>;
+};
+
+&cpu_l0 {
+	cpu-supply = <&vdd_cpu_lit_s0>;
+};
+
+&cpu_l1 {
+	cpu-supply = <&vdd_cpu_lit_s0>;
+};
+
+&cpu_l2 {
+	cpu-supply = <&vdd_cpu_lit_s0>;
+};
+
+&cpu_l3 {
+	cpu-supply = <&vdd_cpu_lit_s0>;
+};
+
+&gmac1 {
+	phy-handle = <&rgmii_phy1>;
+	phy-mode = "rgmii-id";
+	phy-supply = <&vcc_3v3_s0>;
+	pinctrl-0 = <&gmac1_miim
+		     &gmac1_tx_bus2
+		     &gmac1_rx_bus2
+		     &gmac1_rgmii_clk
+		     &gmac1_rgmii_bus
+		     &gmac1_clkinout>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&gpu {
+	mali-supply = <&vdd_gpu_s0>;
+	status = "okay";
+};
+
+&hdmi0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&hdmim0_tx0_cec
+		     &hdmim1_tx0_hpd
+		     &hdmim0_tx0_scl
+		     &hdmim0_tx0_sda>;
+	status = "okay";
+};
+
+&hdmi0_in {
+	hdmi0_in_vp0: endpoint {
+		remote-endpoint = <&vp0_out_hdmi0>;
+	};
+};
+
+&hdmi0_out {
+	hdmi0_out_con: endpoint {
+		remote-endpoint = <&hdmi0_con_in>;
+	};
+};
+
+&hdptxphy_hdmi0 {
+	status = "okay";
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0m2_xfer>;
+	status = "okay";
+
+	vdd_cpu_big0_s0: regulator@42 {
+		compatible = "rockchip,rk8602";
+		reg = <0x42>;
+		fcs,suspend-voltage-selector = <1>;
+		regulator-name = "vdd_cpu_big0_s0";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <550000>;
+		regulator-max-microvolt = <1050000>;
+		regulator-ramp-delay = <2300>;
+		vin-supply = <&vcc_sysin>;
+
+		regulator-state-mem {
+			regulator-off-in-suspend;
+		};
+	};
+
+	vdd_cpu_big1_s0: regulator@43 {
+		compatible = "rockchip,rk8603", "rockchip,rk8602";
+		reg = <0x43>;
+		fcs,suspend-voltage-selector = <1>;
+		regulator-name = "vdd_cpu_big1_s0";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <550000>;
+		regulator-max-microvolt = <1050000>;
+		regulator-ramp-delay = <2300>;
+		vin-supply = <&vcc_sysin>;
+
+		regulator-state-mem {
+			regulator-off-in-suspend;
+		};
+	};
+
+	eeprom@50 {
+		compatible = "belling,bl24c16a", "atmel,24c16";
+		reg = <0x50>;
+		pagesize = <16>;
+		vcc-supply = <&vcc_3v3_pmu>;
+	};
+};
+
+&i2c2 {
+	status = "okay";
+
+	vdd_npu_s0: regulator@42 {
+		compatible = "rockchip,rk8602";
+		reg = <0x42>;
+		fcs,suspend-voltage-selector = <1>;
+		regulator-name = "vdd_npu_s0";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <550000>;
+		regulator-max-microvolt = <950000>;
+		regulator-ramp-delay = <2300>;
+		vin-supply = <&vcc_sysin>;
+
+		regulator-state-mem {
+			regulator-off-in-suspend;
+		};
+	};
+};
+
+&i2c5 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c5m2_xfer>;
+	status = "okay";
+
+	rtc@51 {
+		compatible = "haoyu,hym8563";
+		reg = <0x51>;
+		#clock-cells = <0>;
+		clock-output-names = "rtcic_32kout";
+		interrupt-parent = <&gpio0>;
+		interrupts = <RK_PB0 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&rtc_int_l>;
+	};
+};
+
+&i2c7 {
+	status = "okay";
+
+	audio-codec@11 {
+		compatible = "everest,es8316";
+		reg = <0x11>;
+		assigned-clocks = <&cru I2S0_8CH_MCLKOUT>;
+		assigned-clock-rates = <12288000>;
+		clocks = <&cru I2S0_8CH_MCLKOUT>;
+		clock-names = "mclk";
+		#sound-dai-cells = <0>;
+
+		port {
+			es8316_p0_0: endpoint {
+				remote-endpoint = <&i2s0_8ch_p0_0>;
+			};
+		};
+	};
+};
+
+&i2s0_8ch {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2s0_lrck
+		     &i2s0_mclk
+		     &i2s0_sclk
+		     &i2s0_sdi0
+		     &i2s0_sdo0>;
+	status = "okay";
+
+	i2s0_8ch_p0: port {
+		i2s0_8ch_p0_0: endpoint {
+			dai-format = "i2s";
+			mclk-fs = <256>;
+			remote-endpoint = <&es8316_p0_0>;
+		};
+	};
+};
+
+&mdio1 {
+	rgmii_phy1: ethernet-phy@1 {
+		compatible = "ethernet-phy-id001c.c916";
+		reg = <1>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&gmac1_rstn>;
+		reset-assert-us = <20000>;
+		reset-deassert-us = <100000>;
+		reset-gpios = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&pcie2x1l2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pcie20x1_2_perstn_m0>;
+	reset-gpios = <&gpio3 RK_PD1 GPIO_ACTIVE_HIGH>;
+	vpcie3v3-supply = <&pcie2x1l2_3v3>;
+	status = "okay";
+};
+
+&pinctrl {
+	leds {
+		led_pins: led-pins {
+			rockchip,pins = <3 RK_PC4 RK_FUNC_GPIO &pcfg_pull_none>,
+					<3 RK_PD5 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	mdio {
+		gmac1_rstn: gmac1-rstn {
+			rockchip,pins = <3 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	pcie {
+		pcie20x1_2_perstn_m0: pcie20x1-2-perstn-m0 {
+			rockchip,pins = <3 RK_PD1 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		pow_en: pow-en {
+			rockchip,pins = <0 RK_PC5 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	rtc {
+		rtc_int_l: rtc-int-l {
+			rockchip,pins = <0 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	usb {
+		usb_host_pwren_h: usb-host-pwren-h {
+			rockchip,pins = <4 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		usb_otg_pwren_h: usb-otg-pwren-h {
+			rockchip,pins = <0 RK_PD4 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		usb_wifi_pwr: usb-wifi-pwr {
+			rockchip,pins = <0 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		vcc_5v0_pwren_h: vcc-5v0-pwren-h {
+			rockchip,pins = <4 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+};
+
+&pwm3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pwm3m1_pins>;
+	status = "okay";
+};
+
+&saradc {
+	vref-supply = <&vcca_1v8_s0>;
+	status = "okay";
+};
+
+&sdhci {
+	bus-width = <8>;
+	mmc-hs400-1_8v;
+	mmc-hs400-enhanced-strobe;
+	no-sdio;
+	no-sd;
+	non-removable;
+	status = "okay";
+};
+
+&sdmmc {
+	bus-width = <4>;
+	cap-mmc-highspeed;
+	cap-sd-highspeed;
+	disable-wp;
+	no-sdio;
+	no-mmc;
+	sd-uhs-sdr104;
+	vmmc-supply = <&vcc_3v3_s3>;
+	vqmmc-supply = <&vccio_sd_s0>;
+	status = "okay";
+};
+
+&sfc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&fspim0_pins>;
+
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <104000000>;
+		spi-rx-bus-width = <4>;
+		spi-tx-bus-width = <1>;
+	};
+};
+
+&spi2 {
+	status = "okay";
+	assigned-clocks = <&cru CLK_SPI2>;
+	assigned-clock-rates = <200000000>;
+	num-cs = <1>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi2m2_cs0 &spi2m2_pins>;
+
+	pmic@0 {
+		compatible = "rockchip,rk806";
+		reg = <0>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <7 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pmic_pins>, <&rk806_dvs1_null>,
+			    <&rk806_dvs2_null>, <&rk806_dvs3_null>;
+		spi-max-frequency = <1000000>;
+		system-power-controller;
+
+		vcc1-supply = <&vcc_sysin>;
+		vcc2-supply = <&vcc_sysin>;
+		vcc3-supply = <&vcc_sysin>;
+		vcc4-supply = <&vcc_sysin>;
+		vcc5-supply = <&vcc_sysin>;
+		vcc6-supply = <&vcc_sysin>;
+		vcc7-supply = <&vcc_sysin>;
+		vcc8-supply = <&vcc_sysin>;
+		vcc9-supply = <&vcc_sysin>;
+		vcc10-supply = <&vcc_sysin>;
+		vcc11-supply = <&vcc_2v0_pldo_s3>;
+		vcc12-supply = <&vcc_sysin>;
+		vcc13-supply = <&vcc_1v1_nldo_s3>;
+		vcc14-supply = <&vcc_1v1_nldo_s3>;
+		vcca-supply = <&vcca>;
+
+		rk806_dvs1_null: dvs1-null-pins {
+			pins = "gpio_pwrctrl1";
+			function = "pin_fun0";
+		};
+
+		rk806_dvs2_null: dvs2-null-pins {
+			pins = "gpio_pwrctrl2";
+			function = "pin_fun0";
+		};
+
+		rk806_dvs3_null: dvs3-null-pins {
+			pins = "gpio_pwrctrl3";
+			function = "pin_fun0";
+		};
+
+		regulators {
+			vdd_gpu_s0: dcdc-reg1 {
+				regulator-name = "vdd_gpu_s0";
+				regulator-boot-on;
+				regulator-min-microvolt = <550000>;
+				regulator-max-microvolt = <950000>;
+				regulator-ramp-delay = <12500>;
+				regulator-enable-ramp-delay = <400>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_cpu_lit_s0: dcdc-reg2 {
+				regulator-name = "vdd_cpu_lit_s0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <550000>;
+				regulator-max-microvolt = <950000>;
+				regulator-ramp-delay = <12500>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_logic_s0: dcdc-reg3 {
+				regulator-name = "vdd_logic_s0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <675000>;
+				regulator-max-microvolt = <750000>;
+				regulator-ramp-delay = <12500>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <750000>;
+				};
+			};
+
+			vdd_vdenc_s0: dcdc-reg4 {
+				regulator-name = "vdd_vdenc_s0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <550000>;
+				regulator-max-microvolt = <950000>;
+				regulator-ramp-delay = <12500>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_ddr_s0: dcdc-reg5 {
+				regulator-name = "vdd_ddr_s0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <675000>;
+				regulator-max-microvolt = <900000>;
+				regulator-ramp-delay = <12500>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+					regulator-suspend-microvolt = <850000>;
+				};
+			};
+
+			vdd2_ddr_s3: dcdc-reg6 {
+				regulator-name = "vdd2_ddr_s3";
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			vcc_2v0_pldo_s3: dcdc-reg7 {
+				regulator-name = "vdd_2v0_pldo_s3";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <2000000>;
+				regulator-max-microvolt = <2000000>;
+				regulator-ramp-delay = <12500>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <2000000>;
+				};
+			};
+
+			vcc_3v3_s3: dcdc-reg8 {
+				regulator-name = "vcc_3v3_s3";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+				};
+			};
+
+			vddq_ddr_s0: dcdc-reg9 {
+				regulator-name = "vddq_ddr_s0";
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc1v8_pmu_ddr_s3: dcdc-reg10 {
+				regulator-name = "vcc1v8_pmu_ddr_s3";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vcc_1v8_s0: pldo-reg1 {
+				regulator-name = "vcc_1v8_s0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vcca_1v8_s0: pldo-reg2 {
+				regulator-name = "vcca_1v8_s0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vdda_1v2_s0: pldo-reg3 {
+				regulator-name = "vdda_1v2_s0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcca_3v3_s0: pldo-reg4 {
+				regulator-name = "vcca_3v3_s0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+				};
+			};
+
+			vccio_sd_s0: pldo-reg5 {
+				regulator-name = "vccio_sd_s0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			pldo6_s3: pldo-reg6 {
+				regulator-name = "pldo6_s3";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vdd_0v75_s3: nldo-reg1 {
+				regulator-name = "vdd_0v75_s3";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <750000>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <750000>;
+				};
+			};
+
+			vdda_ddr_pll_s0: nldo-reg2 {
+				regulator-name = "vdda_ddr_pll_s0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <850000>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <850000>;
+				};
+			};
+
+			vdda_0v75_s0: nldo-reg3 {
+				regulator-name = "vdda_0v75_s0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <750000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdda_0v85_s0: nldo-reg4 {
+				regulator-name = "vdda_0v85_s0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <850000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_0v75_s0: nldo-reg5 {
+				regulator-name = "vdd_0v75_s0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <750000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+		};
+	};
+};
+
+&tsadc {
+	status = "okay";
+};
+
+&u2phy0 {
+	status = "okay";
+};
+
+&u2phy0_otg {
+	phy-supply = <&vcc5v0_usb_otg0>;
+	status = "okay";
+};
+
+&u2phy2 {
+	status = "okay";
+};
+
+&u2phy2_host {
+	/* connected to USB hub, which is powered by vcc_5v0 */
+	phy-supply = <&vcc_5v0>;
+	status = "okay";
+};
+
+&u2phy3 {
+	status = "okay";
+};
+
+&u2phy3_host {
+	phy-supply = <&vcc5v0_usb_host>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-0 = <&uart2m0_xfer>;
+	status = "okay";
+};
+
+&usbdp_phy0 {
+	status = "okay";
+};
+
+&usb_host0_ehci {
+	status = "okay";
+};
+
+&usb_host0_xhci {
+	dr_mode = "host";
+	status = "okay";
+};
+
+&usb_host1_ehci {
+	status = "okay";
+};
+
+&usb_host1_ohci {
+	status = "okay";
+};
+
+&usb_host2_xhci {
+	status = "okay";
+};
+
+&vop_mmu {
+	status = "okay";
+};
+
+&vop {
+	status = "okay";
+};
+
+&vp0 {
+	vp0_out_hdmi0: endpoint@ROCKCHIP_VOP2_EP_HDMI0 {
+		reg = <ROCKCHIP_VOP2_EP_HDMI0>;
+		remote-endpoint = <&hdmi0_in_vp0>;
+	};
+};
Signature · 1 line
2.43.0
#5 lore raw

PATCH v3 5/5 rockchip: Add support for Radxa ROCK 5C

In reply to FUKAUMI Naoki

Radxa ROCK 5C[1] is a Rockchip RK3588S2 based single board computer.

[1] https://radxa.com/products/rock5/5c

---
Changes in v3:
- fix compile error
Changes in v2:
- arch/arm/dts/rk3588s-rock-5-u-boot.dtsi: remove unused node
- include/configs/rock-5-rk3588s.h: fix include order

---
 arch/arm/dts/rk3588s-rock-5-u-boot.dtsi     | 16 ++++
 arch/arm/dts/rk3588s-rock-5c-u-boot.dtsi    |  6 ++
 arch/arm/mach-rockchip/rk3588/Kconfig       |  7 ++
 board/radxa/rock-5-rk3588s/Kconfig          | 12 +++
 board/radxa/rock-5-rk3588s/MAINTAINERS      |  8 ++
 board/radxa/rock-5-rk3588s/Makefile         |  3 +
 board/radxa/rock-5-rk3588s/rock-5-rk3588s.c | 77 +++++++++++++++++
 configs/rock-5-rk3588s_defconfig            | 94 +++++++++++++++++++++
 doc/board/rockchip/rockchip.rst             |  1 +
 include/configs/rock-5-rk3588s.h            | 15 ++++
 10 files changed, 239 insertions(+)
 create mode 100644 arch/arm/dts/rk3588s-rock-5-u-boot.dtsi
 create mode 100644 arch/arm/dts/rk3588s-rock-5c-u-boot.dtsi
 create mode 100644 board/radxa/rock-5-rk3588s/Kconfig
 create mode 100644 board/radxa/rock-5-rk3588s/MAINTAINERS
 create mode 100644 board/radxa/rock-5-rk3588s/Makefile
 create mode 100644 board/radxa/rock-5-rk3588s/rock-5-rk3588s.c
 create mode 100644 configs/rock-5-rk3588s_defconfig
 create mode 100644 include/configs/rock-5-rk3588s.h
arch/arm/dts/rk3588s-rock-5-u-boot.dtsi new file +16 -0
new file mode 100644
index 000000000000..be1a2f9ae7bb
@@ -0,0 +1,16 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2024 Radxa Computer (Shenzhen) Co., Ltd.
+ */
+
+#include "rk3588s-u-boot.dtsi"
+
+&saradc {
+	bootph-pre-ram;
+	vdd-microvolts = <1800000>;
+};
+
+&sdhci {
+	cap-mmc-highspeed;
+	mmc-hs200-1_8v;
+};
arch/arm/dts/rk3588s-rock-5c-u-boot.dtsi new file +6 -0
new file mode 100644
index 000000000000..bb1cc9e4a279
@@ -0,0 +1,6 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2024 Radxa Computer (Shenzhen) Co., Ltd.
+ */
+
+#include "rk3588s-rock-5-u-boot.dtsi"
arch/arm/mach-rockchip/rk3588/Kconfig +7 -0
index b5a0e624a532..e1487ecb0464 100644
@@ -260,6 +260,12 @@ config TARGET_ROCK_5_ITX_RK3588
 	  Front-panel connectors for audio and case-power, -leds
 	  Powered by either 12V, ATX power-supply or PoE
 
+config TARGET_ROCK_5_RK3588S
+	bool "Radxa ROCK 5C RK3588S2 board"
+	select BOARD_LATE_INIT
+	help
+	  Radxa ROCK 5C is a Rockchip RK3588S2 based single board computer.
+
 config TARGET_SIGE7_RK3588
 	bool "ArmSoM Sige7 RK3588 board"
 	select BOARD_LATE_INIT
@@ -398,6 +404,7 @@ source "board/turing/turing-rk1-rk3588/Kconfig"
 source "board/radxa/rock5a-rk3588s/Kconfig"
 source "board/radxa/rock5b-rk3588/Kconfig"
 source "board/radxa/rock-5-itx-rk3588/Kconfig"
+source "board/radxa/rock-5-rk3588s/Kconfig"
 source "board/rockchip/evb_rk3588/Kconfig"
 source "board/rockchip/toybrick_rk3588/Kconfig"
 source "board/theobroma-systems/jaguar_rk3588/Kconfig"
board/radxa/rock-5-rk3588s/Kconfig new file +12 -0
new file mode 100644
index 000000000000..86830be1eeca
@@ -0,0 +1,12 @@
+if TARGET_ROCK_5_RK3588S
+
+config SYS_BOARD
+	default "rock-5-rk3588s"
+
+config SYS_VENDOR
+	default "radxa"
+
+config SYS_CONFIG_NAME
+	default "rock-5-rk3588s"
+
+endif
board/radxa/rock-5-rk3588s/MAINTAINERS new file +8 -0
new file mode 100644
index 000000000000..ead6356131c1
@@ -0,0 +1,8 @@
+ROCK-5-RK3588S
+M:	FUKAUMI Naoki <[email protected]>
+S:	Maintained
+F:	arch/arm/dts/rk3588s-rock-5-u-boot.dtsi
+F:	arch/arm/dts/rk3588s-rock-5c-u-boot.dtsi
+F:	board/radxa/rock-5-rk3588s/
+F:	configs/rock-5-rk3588s_defconfig
+F:	include/configs/rock-5-rk3588s.h
board/radxa/rock-5-rk3588s/Makefile new file +3 -0
new file mode 100644
index 000000000000..d9be0f42e6b9
@@ -0,0 +1,3 @@
+# SPDX-License-Identifier: GPL-2.0+
+
+obj-y += rock-5-rk3588s.o
board/radxa/rock-5-rk3588s/rock-5-rk3588s.c new file +77 -0

77 lines not on this page · raw message

configs/rock-5-rk3588s_defconfig new file +94 -0

94 lines not on this page · raw message

doc/board/rockchip/rockchip.rst +1 -0
index 9bab86d23479..6b952654cb3d 100644
@@ -141,6 +141,7 @@ List of mainline supported Rockchip boards:
      - Radxa ROCK 5 ITX (rock-5-itx-rk3588)
      - Radxa ROCK 5A (rock5a-rk3588s)
      - Radxa ROCK 5B (rock5b-rk3588)
+     - Radxa ROCK 5C (rock-5-rk3588s)
      - Rockchip Toybrick TB-RK3588X (toybrick-rk3588)
      - Theobroma Systems RK3588-SBC Jaguar (jaguar-rk3588)
      - Theobroma Systems SOM-RK3588-Q7 - Tiger (tiger-rk3588)
include/configs/rock-5-rk3588s.h new file +15 -0
new file mode 100644
index 000000000000..8020177d7585
@@ -0,0 +1,15 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (c) 2024 Radxa Computer (Shenzhen) Co., Ltd.
+ */
+
+#ifndef __ROCK_5_RK3588S_H
+#define __ROCK_5_RK3588S_H
+
+#define ROCKCHIP_DEVICE_SETTINGS \
+		"stdout=serial,vidconsole\0" \
+		"stderr=serial,vidconsole\0"
+
+#include <configs/rk3588_common.h>
+
+#endif /* __ROCK_5_RK3588S_H */
Signature · 1 line
2.43.0
#6 lore raw

Hi Naoki,

Quoted 71 lines · FUKAUMI Naoki

Radxa ROCK 5C[1] is a Rockchip RK3588S2 based single board computer.

[1] https://radxa.com/products/rock5/5c

---
Changes in v3:
- fix compile error
Changes in v2:
- arch/arm/dts/rk3588s-rock-5-u-boot.dtsi: remove unused node
- include/configs/rock-5-rk3588s.h: fix include order

---
  arch/arm/dts/rk3588s-rock-5-u-boot.dtsi     | 16 ++++
  arch/arm/dts/rk3588s-rock-5c-u-boot.dtsi    |  6 ++
  arch/arm/mach-rockchip/rk3588/Kconfig       |  7 ++
  board/radxa/rock-5-rk3588s/Kconfig          | 12 +++
  board/radxa/rock-5-rk3588s/MAINTAINERS      |  8 ++
  board/radxa/rock-5-rk3588s/Makefile         |  3 +
  board/radxa/rock-5-rk3588s/rock-5-rk3588s.c | 77 +++++++++++++++++
  configs/rock-5-rk3588s_defconfig            | 94 +++++++++++++++++++++
  doc/board/rockchip/rockchip.rst             |  1 +
  include/configs/rock-5-rk3588s.h            | 15 ++++
  10 files changed, 239 insertions(+)

create mode 100644 arch/arm/dts/rk3588s-rock-5-u-boot.dtsi create mode 100644 arch/arm/dts/rk3588s-rock-5c-u-boot.dtsi create mode 100644 board/radxa/rock-5-rk3588s/Kconfig create mode 100644 board/radxa/rock-5-rk3588s/MAINTAINERS create mode 100644 board/radxa/rock-5-rk3588s/Makefile create mode 100644 board/radxa/rock-5-rk3588s/rock-5-rk3588s.c create mode 100644 configs/rock-5-rk3588s_defconfig create mode 100644 include/configs/rock-5-rk3588s.h

arch/arm/dts/rk3588s-rock-5-u-boot.dtsi new file +16 -0
new file mode 100644
index 000000000000..be1a2f9ae7bb
@@ -0,0 +1,16 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2024 Radxa Computer (Shenzhen) Co., Ltd.
+ */
+
+#include "rk3588s-u-boot.dtsi"
+
+&saradc {
+	bootph-pre-ram;
+	vdd-microvolts = <1800000>;
+};
+
+&sdhci {
+	cap-mmc-highspeed;
+	mmc-hs200-1_8v;
+};
arch/arm/dts/rk3588s-rock-5c-u-boot.dtsi new file +6 -0
new file mode 100644
index 000000000000..bb1cc9e4a279
@@ -0,0 +1,6 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2024 Radxa Computer (Shenzhen) Co., Ltd.
+ */
+
+#include "rk3588s-rock-5-u-boot.dtsi"
arch/arm/mach-rockchip/rk3588/Kconfig +0 -0
index b5a0e624a532..e1487ecb0464 100644

arch/arm/mach-rockchip/rk3588/Kconfig config TARGET_ROCK_5_ITX_RK3588 · line 263

Quoted 4 lines
arch/arm/mach-rockchip/rk3588/Kconfig +1 -0
@@ -260,6 +260,12 @@ config TARGET_ROCK_5_ITX_RK3588
  	  Front-panel connectors for audio and case-power, -leds
  	  Powered by either 12V, ATX power-supply or PoE
 
+config TARGET_ROCK_5_RK3588S

This should be TARGET_ROCK_5C_RK3588S?

arch/arm/mach-rockchip/rk3588/Kconfig source "board/turing/turing-rk1-rk3588/Kconfig" · line 407

Quoted 13 lines
arch/arm/mach-rockchip/rk3588/Kconfig +6 -0
+	bool "Radxa ROCK 5C RK3588S2 board"
+	select BOARD_LATE_INIT
+	help
+	  Radxa ROCK 5C is a Rockchip RK3588S2 based single board computer.
+
  config TARGET_SIGE7_RK3588
  	bool "ArmSoM Sige7 RK3588 board"
  	select BOARD_LATE_INIT
@@ -398,6 +404,7 @@ source "board/turing/turing-rk1-rk3588/Kconfig"
  source "board/radxa/rock5a-rk3588s/Kconfig"
  source "board/radxa/rock5b-rk3588/Kconfig"
  source "board/radxa/rock-5-itx-rk3588/Kconfig"
+source "board/radxa/rock-5-rk3588s/Kconfig"

Where's the c gone?

Quoted 27 lines
arch/arm/mach-rockchip/rk3588/Kconfig +0 -0
  source "board/rockchip/evb_rk3588/Kconfig"
  source "board/rockchip/toybrick_rk3588/Kconfig"
  source "board/theobroma-systems/jaguar_rk3588/Kconfig"
board/radxa/rock-5-rk3588s/Kconfig new file +12 -0
new file mode 100644
index 000000000000..86830be1eeca
@@ -0,0 +1,12 @@
+if TARGET_ROCK_5_RK3588S
+
+config SYS_BOARD
+	default "rock-5-rk3588s"
+
+config SYS_VENDOR
+	default "radxa"
+
+config SYS_CONFIG_NAME
+	default "rock-5-rk3588s"
+
+endif
board/radxa/rock-5-rk3588s/MAINTAINERS new file +0 -0
new file mode 100644
index 000000000000..ead6356131c1

board/radxa/rock-5-rk3588s/MAINTAINERS line 8

Quoted 8 lines
board/radxa/rock-5-rk3588s/MAINTAINERS new file +8 -0
@@ -0,0 +1,8 @@
+ROCK-5-RK3588S
+M:	FUKAUMI Naoki <[email protected]>
+S:	Maintained
+F:	arch/arm/dts/rk3588s-rock-5-u-boot.dtsi
+F:	arch/arm/dts/rk3588s-rock-5c-u-boot.dtsi
+F:	board/radxa/rock-5-rk3588s/
+F:	configs/rock-5-rk3588s_defconfig
+F:	include/configs/rock-5-rk3588s.h

Why are all those files missing the c character?

Quoted 29 lines
board/radxa/rock-5-rk3588s/Makefile new file +3 -0
new file mode 100644
index 000000000000..d9be0f42e6b9
@@ -0,0 +1,3 @@
+# SPDX-License-Identifier: GPL-2.0+
+
+obj-y += rock-5-rk3588s.o
board/radxa/rock-5-rk3588s/rock-5-rk3588s.c new file +14 -0
new file mode 100644
index 000000000000..a840ca7698d4
@@ -0,0 +1,77 @@
+// SPDX-License-Identifier: GPL-2.0+
+
+#include <linux/errno.h>
+#include <linux/kernel.h>
+#include <adc.h>
+#include <env.h>
+
+#define BOARD_ID	5
+
+struct board_model {
+	unsigned int low;
+	unsigned int high;
+	const char *board;
+	const char *board_name;

board/radxa/rock-5-rk3588s/rock-5-rk3588s.c line 24

Quoted 10 lines
board/radxa/rock-5-rk3588s/rock-5-rk3588s.c new file +10 -0
+	const char *fdtfile;
+};
+
+static const struct board_model board_models[] = {
+	{
+		0,
+		50,
+		"rock-5a-rk3588s",
+		"Radxa ROCK 5A",
+		"rockchip/rk3588s-rock-5a.dtb",

We already have a config and board files for the rock-5a... There should probably something to be done to merge them together or remove this part?

Quoted 70 lines
board/radxa/rock-5-rk3588s/rock-5-rk3588s.c new file +53 -0
+	},
+	{
+		2375,
+		2425,
+		"rock-5c-rk3588s",
+		"Radxa ROCK 5C",
+		"rockchip/rk3588s-rock-5c.dtb"
+	},
+};
+
+static const struct board_model *get_board_model(void)
+{
+	unsigned int val;
+	int i, ret;
+
+	ret = adc_channel_single_shot("adc@fec10000", BOARD_ID, &val);
+	debug("adc_channel_single_shot ret %d val %u\n", ret, val);
+	if (ret)
+		return NULL;
+
+	for (i = 0; i < ARRAY_SIZE(board_models); i++) {
+		unsigned int min = board_models[i].low;
+		unsigned int max = board_models[i].high;
+
+		if (min <= val && val <= max)
+			return &board_models[i];
+	}
+
+	return NULL;
+}
+
+int rk_board_late_init(void)
+{
+	const struct board_model *model = get_board_model();
+
+	if (model) {
+		env_set("board", model->board);
+		env_set("board_name", model->board_name);
+		env_set("fdtfile", model->fdtfile);
+	}
+
+	return 0;
+}
+
+int board_fit_config_name_match(const char *name)
+{
+	const struct board_model *model = get_board_model();
+
+	if (model && !strcmp(name, model->fdtfile))
+		return 0;
+
+	return -ENOENT;
+}
configs/rock-5-rk3588s_defconfig new file +11 -0
new file mode 100644
index 000000000000..54043264de48
@@ -0,0 +1,94 @@
+CONFIG_ARM=y
+CONFIG_SKIP_LOWLEVEL_INIT=y
+CONFIG_SYS_HAS_NONCACHED_MEMORY=y
+CONFIG_COUNTER_FREQUENCY=24000000
+CONFIG_ARCH_ROCKCHIP=y
+CONFIG_DEFAULT_DEVICE_TREE="rockchip/rk3588s-rock-5a"
+CONFIG_ROCKCHIP_RK3588=y
+CONFIG_SPL_SERIAL=y
+CONFIG_TARGET_ROCK_5_RK3588S=y
+CONFIG_SYS_LOAD_ADDR=0xc00800
+CONFIG_DEBUG_UART_BASE=0xFEB50000

configs/rock-5-rk3588s_defconfig line 21

Quoted 10 lines
configs/rock-5-rk3588s_defconfig new file +10 -0
+CONFIG_DEBUG_UART_CLOCK=24000000
+CONFIG_PCI=y
+CONFIG_DEBUG_UART=y
+CONFIG_AHCI=y
+CONFIG_FIT=y
+CONFIG_FIT_VERBOSE=y
+CONFIG_SPL_FIT_SIGNATURE=y
+CONFIG_SPL_LOAD_FIT=y
+CONFIG_LEGACY_IMAGE_FORMAT=y
+CONFIG_DEFAULT_FDT_FILE="rockchip/rk3588s-rock-5a.dtb"

And now we default to ROCK 5A DTB... This is all very confusing with this little explained in the commit log.

Cheers,
Quentin

#7 lore raw

Hi Quentin,

Thank you very much for your review!

Quoted 71 lines · Quentin Schulz

Hi Naoki,

Quoted 68 lines · FUKAUMI Naoki

Radxa ROCK 5C[1] is a Rockchip RK3588S2 based single board computer.

[1] https://radxa.com/products/rock5/5c

---
Changes in v3:
- fix compile error
Changes in v2:
- arch/arm/dts/rk3588s-rock-5-u-boot.dtsi: remove unused node
- include/configs/rock-5-rk3588s.h: fix include order
---
  arch/arm/dts/rk3588s-rock-5-u-boot.dtsi     | 16 ++++ arch/arm/dts/rk3588s-rock-5c-u-boot.dtsi    |  6 ++ arch/arm/mach-rockchip/rk3588/Kconfig       |  7 ++ board/radxa/rock-5-rk3588s/Kconfig          | 12 +++ board/radxa/rock-5-rk3588s/MAINTAINERS      |  8 ++ board/radxa/rock-5-rk3588s/Makefile         |  3 + board/radxa/rock-5-rk3588s/rock-5-rk3588s.c | 77 +++++++++++++++++ configs/rock-5-rk3588s_defconfig            | 94 +++++++++++++++++++++ doc/board/rockchip/rockchip.rst             |  1 + include/configs/rock-5-rk3588s.h            | 15 ++++

  10 files changed, 239 insertions(+)

  create mode 100644 arch/arm/dts/rk3588s-rock-5-u-boot.dtsi create mode 100644 arch/arm/dts/rk3588s-rock-5c-u-boot.dtsi create mode 100644 board/radxa/rock-5-rk3588s/Kconfig create mode 100644 board/radxa/rock-5-rk3588s/MAINTAINERS create mode 100644 board/radxa/rock-5-rk3588s/Makefile create mode 100644 board/radxa/rock-5-rk3588s/rock-5-rk3588s.c create mode 100644 configs/rock-5-rk3588s_defconfig create mode 100644 include/configs/rock-5-rk3588s.h

arch/arm/dts/rk3588s-rock-5-u-boot.dtsi new file +16 -0
new file mode 100644
index 000000000000..be1a2f9ae7bb
@@ -0,0 +1,16 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2024 Radxa Computer (Shenzhen) Co., Ltd.
+ */
+
+#include "rk3588s-u-boot.dtsi"
+
+&saradc {
+    bootph-pre-ram;
+    vdd-microvolts = <1800000>;
+};
+
+&sdhci {
+    cap-mmc-highspeed;
+    mmc-hs200-1_8v;
+};
arch/arm/dts/rk3588s-rock-5c-u-boot.dtsi new file +6 -0
new file mode 100644
index 000000000000..bb1cc9e4a279
@@ -0,0 +1,6 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2024 Radxa Computer (Shenzhen) Co., Ltd.
+ */
+
+#include "rk3588s-rock-5-u-boot.dtsi"
arch/arm/mach- rockchip/rk3588/Kconfig renamed from arch/arm/mach-rockchip/rk3588/Kconfig +0 -0
index b5a0e624a532..e1487ecb0464 100644
Quoted 8 lines
Quoted 6 lines
arch/arm/mach-rockchip/rk3588/Kconfig +0 -0
@@ -260,6 +260,12 @@ config TARGET_ROCK_5_ITX_RK3588

        Front-panel connectors for audio and case-power, -leds Powered by either 12V, ATX power-supply or PoE +config TARGET_ROCK_5_RK3588S

This should be TARGET_ROCK_5C_RK3588S?

rock-pi-4-rk3399_defconfig uses CONFIG_TARGET_ROCKPI4_RK3399. I'm doing same thing.

Quoted 7 lines
Quoted 7 lines

+    bool "Radxa ROCK 5C RK3588S2 board"
+    select BOARD_LATE_INIT
+    help
+      Radxa ROCK 5C is a Rockchip RK3588S2 based single board computer. +
  config TARGET_SIGE7_RK3588
      bool "ArmSoM Sige7 RK3588 board"

Quoted 8 lines
Quoted 6 lines

      select BOARD_LATE_INIT

arch/arm/mach-rockchip/rk3588/Kconfig +0 -0
@@ -398,6 +404,7 @@ source "board/turing/turing-rk1-rk3588/Kconfig"

  source "board/radxa/rock5a-rk3588s/Kconfig"
  source "board/radxa/rock5b-rk3588/Kconfig"
  source "board/radxa/rock-5-itx-rk3588/Kconfig"
+source "board/radxa/rock-5-rk3588s/Kconfig"

Where's the c gone?

There is board/radxa/rockpi4-rk3399/.

Quoted 29 lines
Quoted 29 lines

  source "board/rockchip/evb_rk3588/Kconfig" source "board/rockchip/toybrick_rk3588/Kconfig" source "board/theobroma-systems/jaguar_rk3588/Kconfig"

board/radxa/rock-5-rk3588s/Kconfig new file +12 -0
new file mode 100644
index 000000000000..86830be1eeca
@@ -0,0 +1,12 @@
+if TARGET_ROCK_5_RK3588S
+
+config SYS_BOARD
+    default "rock-5-rk3588s"
+
+config SYS_VENDOR
+    default "radxa"
+
+config SYS_CONFIG_NAME
+    default "rock-5-rk3588s"
+
+endif
board/radxa/rock-5-rk3588s/MAINTAINERS new file +2 -0
new file mode 100644
index 000000000000..ead6356131c1
@@ -0,0 +1,8 @@
+ROCK-5-RK3588S
+M:    FUKAUMI Naoki <[email protected]>
Quoted 8 lines

board/radxa/rock-5-rk3588s/MAINTAINERS line 8

Quoted 6 lines
board/radxa/rock-5-rk3588s/MAINTAINERS new file +6 -0
+S:    Maintained
+F:    arch/arm/dts/rk3588s-rock-5-u-boot.dtsi
+F:    arch/arm/dts/rk3588s-rock-5c-u-boot.dtsi
+F:    board/radxa/rock-5-rk3588s/
+F:    configs/rock-5-rk3588s_defconfig
+F:    include/configs/rock-5-rk3588s.h

Why are all those files missing the c character?

Same reason as above.

Quoted 33 lines
Quoted 33 lines
board/radxa/rock-5-rk3588s/Makefile new file +3 -0
new file mode 100644
index 000000000000..d9be0f42e6b9
@@ -0,0 +1,3 @@
+# SPDX-License-Identifier: GPL-2.0+
+
+obj-y += rock-5-rk3588s.o
board/radxa/rock-5-rk3588s/rock-5-rk3588s.c new file +18 -0
new file mode 100644
index 000000000000..a840ca7698d4
@@ -0,0 +1,77 @@
+// SPDX-License-Identifier: GPL-2.0+
+
+#include <linux/errno.h>
+#include <linux/kernel.h>
+#include <adc.h>
+#include <env.h>
+
+#define BOARD_ID    5
+
+struct board_model {
+    unsigned int low;
+    unsigned int high;
+    const char *board;
+    const char *board_name;
+    const char *fdtfile;
+};
+
+static const struct board_model board_models[] = {
Quoted 8 lines

board/radxa/rock-5-rk3588s/rock-5-rk3588s.c line 24

Quoted 6 lines
board/radxa/rock-5-rk3588s/rock-5-rk3588s.c new file +6 -0
+    {
+        0,
+        50,
+        "rock-5a-rk3588s",
+        "Radxa ROCK 5A",
+        "rockchip/rk3588s-rock-5a.dtb",

We already have a config and board files for the rock-5a... There should probably something to be done to merge them together or remove this part?

I'll drop this part from this patch.

Quoted 74 lines
Quoted 74 lines
board/radxa/rock-5-rk3588s/rock-5-rk3588s.c new file +53 -0
+    },
+    {
+        2375,
+        2425,
+        "rock-5c-rk3588s",
+        "Radxa ROCK 5C",
+        "rockchip/rk3588s-rock-5c.dtb"
+    },
+};
+
+static const struct board_model *get_board_model(void)
+{
+    unsigned int val;
+    int i, ret;
+
+    ret = adc_channel_single_shot("adc@fec10000", BOARD_ID, &val);
+    debug("adc_channel_single_shot ret %d val %u\n", ret, val);
+    if (ret)
+        return NULL;
+
+    for (i = 0; i < ARRAY_SIZE(board_models); i++) {
+        unsigned int min = board_models[i].low;
+        unsigned int max = board_models[i].high;
+
+        if (min <= val && val <= max)
+            return &board_models[i];
+    }
+
+    return NULL;
+}
+
+int rk_board_late_init(void)
+{
+    const struct board_model *model = get_board_model();
+
+    if (model) {
+        env_set("board", model->board);
+        env_set("board_name", model->board_name);
+        env_set("fdtfile", model->fdtfile);
+    }
+
+    return 0;
+}
+
+int board_fit_config_name_match(const char *name)
+{
+    const struct board_model *model = get_board_model();
+
+    if (model && !strcmp(name, model->fdtfile))
+        return 0;
+
+    return -ENOENT;
+}
configs/rock-5-rk3588s_defconfig new file +15 -0
new file mode 100644
index 000000000000..54043264de48
@@ -0,0 +1,94 @@
+CONFIG_ARM=y
+CONFIG_SKIP_LOWLEVEL_INIT=y
+CONFIG_SYS_HAS_NONCACHED_MEMORY=y
+CONFIG_COUNTER_FREQUENCY=24000000
+CONFIG_ARCH_ROCKCHIP=y
+CONFIG_DEFAULT_DEVICE_TREE="rockchip/rk3588s-rock-5a"
+CONFIG_ROCKCHIP_RK3588=y
+CONFIG_SPL_SERIAL=y
+CONFIG_TARGET_ROCK_5_RK3588S=y
+CONFIG_SYS_LOAD_ADDR=0xc00800
+CONFIG_DEBUG_UART_BASE=0xFEB50000
+CONFIG_DEBUG_UART_CLOCK=24000000
+CONFIG_PCI=y
+CONFIG_DEBUG_UART=y
+CONFIG_AHCI=y
Quoted 8 lines

configs/rock-5-rk3588s_defconfig line 21

Quoted 6 lines
configs/rock-5-rk3588s_defconfig new file +6 -0
+CONFIG_FIT=y
+CONFIG_FIT_VERBOSE=y
+CONFIG_SPL_FIT_SIGNATURE=y
+CONFIG_SPL_LOAD_FIT=y
+CONFIG_LEGACY_IMAGE_FORMAT=y
+CONFIG_DEFAULT_FDT_FILE="rockchip/rk3588s-rock-5a.dtb"

And now we default to ROCK 5A DTB... This is all very confusing with this little explained in the commit log.

Same as rock-pi-4-rk3399_defconfig, but I'll change them.

Best regards,

--
FUKAUMI Naoki
Radxa Computer (Shenzhen) Co., Ltd.

Quoted 3 lines

Cheers,
Quentin

#8 lore raw

Hi Naoki,

Quoted 85 lines · FUKAUMI Naoki

Hi Quentin,

Thank you very much for your review!

Quoted 71 lines · Quentin Schulz

Hi Naoki,

Quoted 68 lines · FUKAUMI Naoki

Radxa ROCK 5C[1] is a Rockchip RK3588S2 based single board computer.

[1] https://eur02.safelinks.protection.outlook.com/? url=https%3A%2F%2Fradxa.com%2Fproducts%2Frock5%2F5c&data=05%7C02%7Cquentin.schulz%40cherry.de%7Cbe7d810ae88f4203af8208dd1ca921c6%7C5e0e1b5221b54e7b83bb514ec460677e%7C0%7C0%7C638698234938145886%7CUnknown%7CTWFpbGZsb3d8eyJFbXB0eU1hcGkiOnRydWUsIlYiOiIwLjAuMDAwMCIsIlAiOiJXaW4zMiIsIkFOIjoiTWFpbCIsIldUIjoyfQ%3D%3D%7C0%7C%7C%7C&sdata=8TcHBC2dV1LzouPSR8%2FICOBVshq9RndgMQS3m3XLwFs%3D&reserved=0

---
Changes in v3:
- fix compile error
Changes in v2:
- arch/arm/dts/rk3588s-rock-5-u-boot.dtsi: remove unused node
- include/configs/rock-5-rk3588s.h: fix include order
---
  arch/arm/dts/rk3588s-rock-5-u-boot.dtsi     | 16 ++++ arch/arm/dts/rk3588s-rock-5c-u-boot.dtsi    |  6 ++ arch/arm/mach-rockchip/rk3588/Kconfig       |  7 ++ board/radxa/rock-5-rk3588s/Kconfig          | 12 +++ board/radxa/rock-5-rk3588s/MAINTAINERS      |  8 ++ board/radxa/rock-5-rk3588s/Makefile         |  3 + board/radxa/rock-5-rk3588s/rock-5-rk3588s.c | 77 +++++++++++++++++ configs/rock-5-rk3588s_defconfig            | 94 +++++++++++++++++++++ doc/board/rockchip/rockchip.rst             |  1 + include/configs/rock-5-rk3588s.h            | 15 ++++

  10 files changed, 239 insertions(+)

  create mode 100644 arch/arm/dts/rk3588s-rock-5-u-boot.dtsi create mode 100644 arch/arm/dts/rk3588s-rock-5c-u-boot.dtsi create mode 100644 board/radxa/rock-5-rk3588s/Kconfig create mode 100644 board/radxa/rock-5-rk3588s/MAINTAINERS create mode 100644 board/radxa/rock-5-rk3588s/Makefile create mode 100644 board/radxa/rock-5-rk3588s/rock-5-rk3588s.c create mode 100644 configs/rock-5-rk3588s_defconfig create mode 100644 include/configs/rock-5-rk3588s.h

arch/arm/dts/rk3588s-rock-5-u-boot.dtsi new file +16 -0
new file mode 100644
index 000000000000..be1a2f9ae7bb
@@ -0,0 +1,16 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2024 Radxa Computer (Shenzhen) Co., Ltd.
+ */
+
+#include "rk3588s-u-boot.dtsi"
+
+&saradc {
+    bootph-pre-ram;
+    vdd-microvolts = <1800000>;
+};
+
+&sdhci {
+    cap-mmc-highspeed;
+    mmc-hs200-1_8v;
+};
arch/arm/dts/rk3588s-rock-5c-u-boot.dtsi new file +6 -0
new file mode 100644
index 000000000000..bb1cc9e4a279
@@ -0,0 +1,6 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2024 Radxa Computer (Shenzhen) Co., Ltd.
+ */
+
+#include "rk3588s-rock-5-u-boot.dtsi"
arch/arm/mach- rockchip/rk3588/Kconfig renamed from arch/arm/mach-rockchip/rk3588/Kconfig +0 -0
index b5a0e624a532..e1487ecb0464 100644
Quoted 8 lines
Quoted 6 lines
arch/arm/mach-rockchip/rk3588/Kconfig +0 -0
@@ -260,6 +260,12 @@ config TARGET_ROCK_5_ITX_RK3588

        Front-panel connectors for audio and case-power, -leds Powered by either 12V, ATX power-supply or PoE +config TARGET_ROCK_5_RK3588S

This should be TARGET_ROCK_5C_RK3588S?

Quoted 3 lines

rock-pi-4-rk3399_defconfig uses CONFIG_TARGET_ROCKPI4_RK3399. I'm doing same thing.

config TARGET_ROCKPI4_RK3399
help
Support for ROCK Pi 4 board family by Radxa.

Here you say this option is for ROCK 5C only.

While this could be a good idea, anything odd needs to be justified in the commit log so that we can follow your train of thoughts.

This patch series only adds support for the ROCK 5C so nothing hints at this being usable/used for other boards from Radxa. Which boards are you planning to support with this option? If the ROCK 5B/ROCK 5 ITX aren't going to be part of it, why and how do I know which of the ROCK 5 is supported by this option?

This could also be started with a "normal" config option which is named after the board and for the next board support you want to reuse this config option for, you rename it to something more appropriate. In any case, please document the reasons for doing that :)

Cheers,
Quentin

#9 lore raw

Hi Quentin,

Quoted 93 lines · Quentin Schulz

Hi Naoki,

Quoted 86 lines · FUKAUMI Naoki

Hi Quentin,

Thank you very much for your review!

Quoted 72 lines · Quentin Schulz

Hi Naoki,

Quoted 69 lines · FUKAUMI Naoki

Radxa ROCK 5C[1] is a Rockchip RK3588S2 based single board computer.

[1] https://eur02.safelinks.protection.outlook.com/? url=https%3A%2F%2Fradxa.com%2Fproducts%2Frock5%2F5c&data=05%7C02%7Cquentin.schulz%40cherry.de%7Cbe7d810ae88f4203af8208dd1ca921c6%7C5e0e1b5221b54e7b83bb514ec460677e%7C0%7C0%7C638698234938145886%7CUnknown%7CTWFpbGZsb3d8eyJFbXB0eU1hcGkiOnRydWUsIlYiOiIwLjAuMDAwMCIsIlAiOiJXaW4zMiIsIkFOIjoiTWFpbCIsIldUIjoyfQ%3D%3D%7C0%7C%7C%7C&sdata=8TcHBC2dV1LzouPSR8%2FICOBVshq9RndgMQS3m3XLwFs%3D&reserved=0

---
Changes in v3:
- fix compile error
Changes in v2:
- arch/arm/dts/rk3588s-rock-5-u-boot.dtsi: remove unused node
- include/configs/rock-5-rk3588s.h: fix include order
---
  arch/arm/dts/rk3588s-rock-5-u-boot.dtsi     | 16 ++++ arch/arm/dts/rk3588s-rock-5c-u-boot.dtsi    |  6 ++ arch/arm/mach-rockchip/rk3588/Kconfig       |  7 ++ board/radxa/rock-5-rk3588s/Kconfig          | 12 +++ board/radxa/rock-5-rk3588s/MAINTAINERS      |  8 ++ board/radxa/rock-5-rk3588s/Makefile         |  3 + board/radxa/rock-5-rk3588s/rock-5-rk3588s.c | 77 +++++++++++++++++ configs/rock-5-rk3588s_defconfig            | 94 +++++++++++++++++
++++
  doc/board/rockchip/rockchip.rst             |  1 + include/configs/rock-5-rk3588s.h            | 15 ++++

  10 files changed, 239 insertions(+)

  create mode 100644 arch/arm/dts/rk3588s-rock-5-u-boot.dtsi create mode 100644 arch/arm/dts/rk3588s-rock-5c-u-boot.dtsi create mode 100644 board/radxa/rock-5-rk3588s/Kconfig create mode 100644 board/radxa/rock-5-rk3588s/MAINTAINERS create mode 100644 board/radxa/rock-5-rk3588s/Makefile create mode 100644 board/radxa/rock-5-rk3588s/rock-5-rk3588s.c create mode 100644 configs/rock-5-rk3588s_defconfig create mode 100644 include/configs/rock-5-rk3588s.h

arch/arm/dts/rk3588s-rock-5-u-boot.dtsi new file +16 -0
new file mode 100644
index 000000000000..be1a2f9ae7bb
@@ -0,0 +1,16 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2024 Radxa Computer (Shenzhen) Co., Ltd.
+ */
+
+#include "rk3588s-u-boot.dtsi"
+
+&saradc {
+    bootph-pre-ram;
+    vdd-microvolts = <1800000>;
+};
+
+&sdhci {
+    cap-mmc-highspeed;
+    mmc-hs200-1_8v;
+};
arch/arm/dts/rk3588s-rock-5c-u-boot.dtsi new file +6 -0
new file mode 100644
index 000000000000..bb1cc9e4a279
@@ -0,0 +1,6 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2024 Radxa Computer (Shenzhen) Co., Ltd.
+ */
+
+#include "rk3588s-rock-5-u-boot.dtsi"
arch/arm/mach- rockchip/rk3588/Kconfig renamed from arch/arm/mach-rockchip/rk3588/Kconfig +0 -0
index b5a0e624a532..e1487ecb0464 100644
Quoted 8 lines
Quoted 6 lines
arch/arm/mach-rockchip/rk3588/Kconfig +0 -0
@@ -260,6 +260,12 @@ config TARGET_ROCK_5_ITX_RK3588

        Front-panel connectors for audio and case-power, -leds Powered by either 12V, ATX power-supply or PoE +config TARGET_ROCK_5_RK3588S

This should be TARGET_ROCK_5C_RK3588S?

Quoted 3 lines

rock-pi-4-rk3399_defconfig uses CONFIG_TARGET_ROCKPI4_RK3399. I'm doing same thing.

Quoted 5 lines

config TARGET_ROCKPI4_RK3399
   help
     Support for ROCK Pi 4 board family by Radxa.

Here you say this option is for ROCK 5C only.

Because this is first patch which adds support for ROCK 5C.

Quoted 3 lines

While this could be a good idea, anything odd needs to be justified in the commit log so that we can follow your train of thoughts.

This patch series only adds support for the ROCK 5C so nothing hints at this being usable/used for other boards from Radxa. Which boards are you planning to support with this option? If the ROCK 5B/ROCK 5 ITX aren't going to be part of it, why and how do I know which of the ROCK 5 is supported by this option?

It's possible to add support for ROCK 5A (RK3588S).

For RK3588 boards, I have another patch which adds rock-5-rk3588.

Quoted 1 line

This could also be started with a "normal" config option which is named after the board and for the next board support you want to reuse this config option for, you rename it to something more appropriate. In any case, please document the reasons for doing that :)

Sorry for my poor explanation...

Best regards,

--
FUKAUMI Naoki
Radxa Computer (Shenzhen) Co., Ltd.

Quoted 3 lines

Cheers,
Quentin

#10 lore raw

Hi Naoki,

Quoted 96 lines · FUKAUMI Naoki

Hi Quentin,

Quoted 93 lines · Quentin Schulz

Hi Naoki,

Quoted 89 lines · FUKAUMI Naoki

Hi Quentin,

Thank you very much for your review!

Quoted 72 lines · Quentin Schulz

Hi Naoki,

Quoted 69 lines · FUKAUMI Naoki

Radxa ROCK 5C[1] is a Rockchip RK3588S2 based single board computer.

[1] https://eur02.safelinks.protection.outlook.com/? url=https%3A%2F%2Fradxa.com%2Fproducts%2Frock5%2F5c&data=05%7C02%7Cquentin.schulz%40cherry.de%7Cbe7d810ae88f4203af8208dd1ca921c6%7C5e0e1b5221b54e7b83bb514ec460677e%7C0%7C0%7C638698234938145886%7CUnknown%7CTWFpbGZsb3d8eyJFbXB0eU1hcGkiOnRydWUsIlYiOiIwLjAuMDAwMCIsIlAiOiJXaW4zMiIsIkFOIjoiTWFpbCIsIldUIjoyfQ%3D%3D%7C0%7C%7C%7C&sdata=8TcHBC2dV1LzouPSR8%2FICOBVshq9RndgMQS3m3XLwFs%3D&reserved=0

---
Changes in v3:
- fix compile error
Changes in v2:
- arch/arm/dts/rk3588s-rock-5-u-boot.dtsi: remove unused node
- include/configs/rock-5-rk3588s.h: fix include order
---
  arch/arm/dts/rk3588s-rock-5-u-boot.dtsi     | 16 ++++ arch/arm/dts/rk3588s-rock-5c-u-boot.dtsi    |  6 ++ arch/arm/mach-rockchip/rk3588/Kconfig       |  7 ++ board/radxa/rock-5-rk3588s/Kconfig          | 12 +++ board/radxa/rock-5-rk3588s/MAINTAINERS      |  8 ++ board/radxa/rock-5-rk3588s/Makefile         |  3 + board/radxa/rock-5-rk3588s/rock-5-rk3588s.c | 77 +++++++++++++++++ configs/rock-5-rk3588s_defconfig            | 94 ++++++++++++++++
+ ++++
  doc/board/rockchip/rockchip.rst             |  1 + include/configs/rock-5-rk3588s.h            | 15 ++++

  10 files changed, 239 insertions(+)

  create mode 100644 arch/arm/dts/rk3588s-rock-5-u-boot.dtsi create mode 100644 arch/arm/dts/rk3588s-rock-5c-u-boot.dtsi create mode 100644 board/radxa/rock-5-rk3588s/Kconfig create mode 100644 board/radxa/rock-5-rk3588s/MAINTAINERS create mode 100644 board/radxa/rock-5-rk3588s/Makefile create mode 100644 board/radxa/rock-5-rk3588s/rock-5-rk3588s.c create mode 100644 configs/rock-5-rk3588s_defconfig create mode 100644 include/configs/rock-5-rk3588s.h

arch/arm/dts/rk3588s-rock-5-u-boot.dtsi new file +16 -0
new file mode 100644
index 000000000000..be1a2f9ae7bb
@@ -0,0 +1,16 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2024 Radxa Computer (Shenzhen) Co., Ltd.
+ */
+
+#include "rk3588s-u-boot.dtsi"
+
+&saradc {
+    bootph-pre-ram;
+    vdd-microvolts = <1800000>;
+};
+
+&sdhci {
+    cap-mmc-highspeed;
+    mmc-hs200-1_8v;
+};
arch/arm/dts/rk3588s-rock-5c-u-boot.dtsi new file +6 -0
new file mode 100644
index 000000000000..bb1cc9e4a279
@@ -0,0 +1,6 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2024 Radxa Computer (Shenzhen) Co., Ltd.
+ */
+
+#include "rk3588s-rock-5-u-boot.dtsi"
arch/arm/mach- rockchip/rk3588/Kconfig renamed from arch/arm/mach-rockchip/rk3588/Kconfig +0 -0
index b5a0e624a532..e1487ecb0464 100644
Quoted 8 lines
Quoted 6 lines
arch/arm/mach-rockchip/rk3588/Kconfig +0 -0
@@ -260,6 +260,12 @@ config TARGET_ROCK_5_ITX_RK3588

        Front-panel connectors for audio and case-power, -leds Powered by either 12V, ATX power-supply or PoE +config TARGET_ROCK_5_RK3588S

This should be TARGET_ROCK_5C_RK3588S?

rock-pi-4-rk3399_defconfig uses CONFIG_TARGET_ROCKPI4_RK3399. I'm doing same thing.

Quoted 8 lines
Quoted 5 lines

config TARGET_ROCKPI4_RK3399
    help
      Support for ROCK Pi 4 board family by Radxa.

Here you say this option is for ROCK 5C only.

Because this is first patch which adds support for ROCK 5C.

That's fine, you could say something like:

Support for ROCK 5 board family by Radxa.
Currently supports: ROCK 5C

And then we can extend this list whenever someone adds support for a new board of that family, which would make it easy to find with a grep if the board is supported and via which target option.

Quoted 6 lines
Quoted 3 lines

While this could be a good idea, anything odd needs to be justified in the commit log so that we can follow your train of thoughts.

This patch series only adds support for the ROCK 5C so nothing hints at this being usable/used for other boards from Radxa. Which boards are you planning to support with this option? If the ROCK 5B/ROCK 5 ITX aren't going to be part of it, why and how do I know which of the ROCK 5 is supported by this option?

It's possible to add support for ROCK 5A (RK3588S).

Since it seems you're planning on supporting ROCK 5A with the same target option and we already support ROCK 5A, maybe start this way instead of adding support for ROCK 5C and then migrate ROCK 5A to that?

i.e. adapt ROCK 5A so that it can be reused for ROCK 5C easily, and then add ROCK 5C using the mechanism you would introduce in the ROCK 5A adaptation commit(s)?

What do you think?

Is the ROCK 5T going to be supported by that common target, defconfig and board file as well? What are your plans :)?

Cheers,
Quentin

#11 lore raw

Hi Quentin,

Quoted 103 lines · Quentin Schulz

Hi Naoki,

Quoted 100 lines · FUKAUMI Naoki

Hi Quentin,

Quoted 97 lines · Quentin Schulz

Hi Naoki,

Quoted 86 lines · FUKAUMI Naoki

Hi Quentin,

Thank you very much for your review!

Quoted 72 lines · Quentin Schulz

Hi Naoki,

Quoted 69 lines · FUKAUMI Naoki

Radxa ROCK 5C[1] is a Rockchip RK3588S2 based single board computer.

[1] https://eur02.safelinks.protection.outlook.com/? url=https%3A%2F%2Fradxa.com%2Fproducts%2Frock5%2F5c&data=05%7C02%7Cquentin.schulz%40cherry.de%7Cbe7d810ae88f4203af8208dd1ca921c6%7C5e0e1b5221b54e7b83bb514ec460677e%7C0%7C0%7C638698234938145886%7CUnknown%7CTWFpbGZsb3d8eyJFbXB0eU1hcGkiOnRydWUsIlYiOiIwLjAuMDAwMCIsIlAiOiJXaW4zMiIsIkFOIjoiTWFpbCIsIldUIjoyfQ%3D%3D%7C0%7C%7C%7C&sdata=8TcHBC2dV1LzouPSR8%2FICOBVshq9RndgMQS3m3XLwFs%3D&reserved=0

---
Changes in v3:
- fix compile error
Changes in v2:
- arch/arm/dts/rk3588s-rock-5-u-boot.dtsi: remove unused node
- include/configs/rock-5-rk3588s.h: fix include order
---
  arch/arm/dts/rk3588s-rock-5-u-boot.dtsi     | 16 ++++ arch/arm/dts/rk3588s-rock-5c-u-boot.dtsi    |  6 ++ arch/arm/mach-rockchip/rk3588/Kconfig       |  7 ++ board/radxa/rock-5-rk3588s/Kconfig          | 12 +++ board/radxa/rock-5-rk3588s/MAINTAINERS      |  8 ++ board/radxa/rock-5-rk3588s/Makefile         |  3 + board/radxa/rock-5-rk3588s/rock-5-rk3588s.c | 77 +++++++++++++++++ configs/rock-5-rk3588s_defconfig            | 94 +++++++++++++++
+ + ++++
  doc/board/rockchip/rockchip.rst             |  1 + include/configs/rock-5-rk3588s.h            | 15 ++++

  10 files changed, 239 insertions(+)

  create mode 100644 arch/arm/dts/rk3588s-rock-5-u-boot.dtsi create mode 100644 arch/arm/dts/rk3588s-rock-5c-u-boot.dtsi create mode 100644 board/radxa/rock-5-rk3588s/Kconfig create mode 100644 board/radxa/rock-5-rk3588s/MAINTAINERS create mode 100644 board/radxa/rock-5-rk3588s/Makefile create mode 100644 board/radxa/rock-5-rk3588s/rock-5-rk3588s.c create mode 100644 configs/rock-5-rk3588s_defconfig create mode 100644 include/configs/rock-5-rk3588s.h

arch/arm/dts/rk3588s-rock-5-u-boot.dtsi new file +16 -0
new file mode 100644
index 000000000000..be1a2f9ae7bb
@@ -0,0 +1,16 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2024 Radxa Computer (Shenzhen) Co., Ltd.
+ */
+
+#include "rk3588s-u-boot.dtsi"
+
+&saradc {
+    bootph-pre-ram;
+    vdd-microvolts = <1800000>;
+};
+
+&sdhci {
+    cap-mmc-highspeed;
+    mmc-hs200-1_8v;
+};
arch/arm/dts/rk3588s-rock-5c-u-boot.dtsi new file +6 -0
new file mode 100644
index 000000000000..bb1cc9e4a279
@@ -0,0 +1,6 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2024 Radxa Computer (Shenzhen) Co., Ltd.
+ */
+
+#include "rk3588s-rock-5-u-boot.dtsi"
arch/arm/ mach- rockchip/rk3588/Kconfig renamed from arch/arm/mach-rockchip/rk3588/Kconfig +0 -0
index b5a0e624a532..e1487ecb0464 100644
Quoted 8 lines
Quoted 6 lines
arch/arm/mach-rockchip/rk3588/Kconfig +0 -0
@@ -260,6 +260,12 @@ config TARGET_ROCK_5_ITX_RK3588

        Front-panel connectors for audio and case-power, -leds Powered by either 12V, ATX power-supply or PoE +config TARGET_ROCK_5_RK3588S

This should be TARGET_ROCK_5C_RK3588S?

Quoted 3 lines

rock-pi-4-rk3399_defconfig uses CONFIG_TARGET_ROCKPI4_RK3399. I'm doing same thing.

config TARGET_ROCKPI4_RK3399
    help
      Support for ROCK Pi 4 board family by Radxa.

Quoted 8 lines
Quoted 4 lines
Quoted 1 line

Here you say this option is for ROCK 5C only.

Because this is first patch which adds support for ROCK 5C.

That's fine, you could say something like:

Support for ROCK 5 board family by Radxa.

More accurately, "RK3588S based ROCK 5" for now. I'm not sure both RK3588 and RK3588S based boards can be supported.

Quoted 8 lines

Currently supports: ROCK 5C

And then we can extend this list whenever someone adds support for a new board of that family, which would make it easy to find with a grep if the board is supported and via which target option.

Quoted 4 lines
Quoted 3 lines

While this could be a good idea, anything odd needs to be justified in the commit log so that we can follow your train of thoughts.

This patch series only adds support for the ROCK 5C so nothing hints at this being usable/used for other boards from Radxa. Which boards are you planning to support with this option? If the ROCK 5B/ROCK 5 ITX aren't going to be part of it, why and how do I know which of the ROCK 5 is supported by this option?

Quoted 8 lines
Quoted 2 lines

It's possible to add support for ROCK 5A (RK3588S).

Since it seems you're planning on supporting ROCK 5A with the same target option and we already support ROCK 5A, maybe start this way instead of adding support for ROCK 5C and then migrate ROCK 5A to that?

i.e. adapt ROCK 5A so that it can be reused for ROCK 5C easily, and then add ROCK 5C using the mechanism you would introduce in the ROCK 5A adaptation commit(s)?

What do you think?

I just wanted to add ROCK 5C because dts was added in upstream. But it's okay to do "Adapt ROCK 5A then add ROCK 5C".

Quoted 1 line

Is the ROCK 5T going to be supported by that common target, defconfig and board file as well? What are your plans :)?

I'm thinking to add support for 5B+ and 5T too. But for making single target, it needs "check SoC variant" code in addition to check "Board ID". I guess following code may be used:

https://patchwork.ozlabs.org/project/uboot/patch/[email protected]/

BTW, unfortunately, Board ID (ADC value) for ROCK 5B is not fixed...

Best regards,

--
FUKAUMI Naoki
Radxa Computer (Shenzhen) Co., Ltd.

Quoted 3 lines

Cheers,
Quentin

#12 lore raw

Hi Naoki,

Quoted 108 lines · FUKAUMI Naoki

Hi Quentin,

Quoted 105 lines · Quentin Schulz

Hi Naoki,

Quoted 102 lines · FUKAUMI Naoki

Hi Quentin,

Quoted 98 lines · Quentin Schulz

Hi Naoki,

Quoted 86 lines · FUKAUMI Naoki

Hi Quentin,

Thank you very much for your review!

Quoted 72 lines · Quentin Schulz

Hi Naoki,

Quoted 69 lines · FUKAUMI Naoki

Radxa ROCK 5C[1] is a Rockchip RK3588S2 based single board computer.

[1] https://eur02.safelinks.protection.outlook.com/? url=https%3A%2F%2Fradxa.com%2Fproducts%2Frock5%2F5c&data=05%7C02%7Cquentin.schulz%40cherry.de%7Cbe7d810ae88f4203af8208dd1ca921c6%7C5e0e1b5221b54e7b83bb514ec460677e%7C0%7C0%7C638698234938145886%7CUnknown%7CTWFpbGZsb3d8eyJFbXB0eU1hcGkiOnRydWUsIlYiOiIwLjAuMDAwMCIsIlAiOiJXaW4zMiIsIkFOIjoiTWFpbCIsIldUIjoyfQ%3D%3D%7C0%7C%7C%7C&sdata=8TcHBC2dV1LzouPSR8%2FICOBVshq9RndgMQS3m3XLwFs%3D&reserved=0

---
Changes in v3:
- fix compile error
Changes in v2:
- arch/arm/dts/rk3588s-rock-5-u-boot.dtsi: remove unused node
- include/configs/rock-5-rk3588s.h: fix include order
---
  arch/arm/dts/rk3588s-rock-5-u-boot.dtsi     | 16 ++++ arch/arm/dts/rk3588s-rock-5c-u-boot.dtsi    |  6 ++ arch/arm/mach-rockchip/rk3588/Kconfig       |  7 ++ board/radxa/rock-5-rk3588s/Kconfig          | 12 +++ board/radxa/rock-5-rk3588s/MAINTAINERS      |  8 ++ board/radxa/rock-5-rk3588s/Makefile         |  3 + board/radxa/rock-5-rk3588s/rock-5-rk3588s.c | 77 +++++++++++++++++ configs/rock-5-rk3588s_defconfig            | 94 ++++++++++++++
+ + + ++++
  doc/board/rockchip/rockchip.rst             |  1 + include/configs/rock-5-rk3588s.h            | 15 ++++

  10 files changed, 239 insertions(+)

  create mode 100644 arch/arm/dts/rk3588s-rock-5-u-boot.dtsi create mode 100644 arch/arm/dts/rk3588s-rock-5c-u-boot.dtsi create mode 100644 board/radxa/rock-5-rk3588s/Kconfig create mode 100644 board/radxa/rock-5-rk3588s/MAINTAINERS create mode 100644 board/radxa/rock-5-rk3588s/Makefile create mode 100644 board/radxa/rock-5-rk3588s/rock-5-rk3588s.c create mode 100644 configs/rock-5-rk3588s_defconfig create mode 100644 include/configs/rock-5-rk3588s.h

arch/arm/dts/rk3588s-rock-5-u-boot.dtsi new file +16 -0
new file mode 100644
index 000000000000..be1a2f9ae7bb
@@ -0,0 +1,16 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2024 Radxa Computer (Shenzhen) Co., Ltd.
+ */
+
+#include "rk3588s-u-boot.dtsi"
+
+&saradc {
+    bootph-pre-ram;
+    vdd-microvolts = <1800000>;
+};
+
+&sdhci {
+    cap-mmc-highspeed;
+    mmc-hs200-1_8v;
+};
arch/arm/dts/rk3588s-rock-5c-u-boot.dtsi new file +6 -0
new file mode 100644
index 000000000000..bb1cc9e4a279
@@ -0,0 +1,6 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2024 Radxa Computer (Shenzhen) Co., Ltd.
+ */
+
+#include "rk3588s-rock-5-u-boot.dtsi"
arch/arm/ mach- rockchip/rk3588/Kconfig renamed from arch/arm/mach-rockchip/rk3588/Kconfig +0 -0
index b5a0e624a532..e1487ecb0464 100644
Quoted 8 lines
Quoted 6 lines
arch/arm/mach-rockchip/rk3588/Kconfig +0 -0
@@ -260,6 +260,12 @@ config TARGET_ROCK_5_ITX_RK3588

        Front-panel connectors for audio and case-power, -leds Powered by either 12V, ATX power-supply or PoE +config TARGET_ROCK_5_RK3588S

This should be TARGET_ROCK_5C_RK3588S?

Quoted 3 lines

rock-pi-4-rk3399_defconfig uses CONFIG_TARGET_ROCKPI4_RK3399. I'm doing same thing.

config TARGET_ROCKPI4_RK3399
    help
      Support for ROCK Pi 4 board family by Radxa.

Here you say this option is for ROCK 5C only.

Quoted 9 lines
Quoted 6 lines
Quoted 2 lines

Because this is first patch which adds support for ROCK 5C.

That's fine, you could say something like:

Support for ROCK 5 board family by Radxa.

More accurately, "RK3588S based ROCK 5" for now. I'm not sure both RK3588 and RK3588S based boards can be supported.

Sounds good to me.

[...]

Quoted 3 lines
Quoted 1 line

Is the ROCK 5T going to be supported by that common target, defconfig and board file as well? What are your plans :)?

I'm thinking to add support for 5B+ and 5T too. But for making single

Are you planning to use TARGET_ROCK_5_RK3588S for 5B+ and 5T too?

Quoted 5 lines

target, it needs "check SoC variant" code in addition to check "Board ID". I guess following code may be used:

 https://eur02.safelinks.protection.outlook.com/?
url=https%3A%2F%2Fpatchwork.ozlabs.org%2Fproject%2Fuboot%2Fpatch%2F20241110005622.1515100-3-jonas%40kwiboo.se%2F&data=05%7C02%7Cquentin.schulz%40cherry.de%7C204a757d4a3045d900a008dd1dd52129%7C5e0e1b5221b54e7b83bb514ec460677e%7C0%7C0%7C638699523428166461%7CUnknown%7CTWFpbGZsb3d8eyJFbXB0eU1hcGkiOnRydWUsIlYiOiIwLjAuMDAwMCIsIlAiOiJXaW4zMiIsIkFOIjoiTWFpbCIsIldUIjoyfQ%3D%3D%7C0%7C%7C%7C&sdata=CLTAcH08Qzmu00q9KH1PuJuUxnAuFcRKobLhnhFR3nI%3D&reserved=0

or just directly reading the OTP value you're interested in. But yes, that could be an option too. You could also have a target for all RK3588S Radxa boards that you can support with the same code, and another one for RK3588 Radxa boards that can be supported with the same code. You can have common codes in a different directory if you want, we use this for Theobroma boards for example, c.f. https://elixir.bootlin.com/u-boot/v2024.10/source/board/theobroma-systems/common. Plenty of options :)

Quoted 2 lines

BTW, unfortunately, Board ID (ADC value) for ROCK 5B is not fixed...

Does this include the ROCK 5B+ as well? It seems SARADC_VIN5_EVB_HW_ID is pulled high for that one though?

Cheers,
Quentin

#13 lore raw
In reply to FUKAUMI Naoki

Hi Naoki,

Quoted 11 lines · FUKAUMI Naoki

Radxa ROCK 5C[1] is a Rockchip RK3588S2 based single board computer.

[1] https://radxa.com/products/rock5/5c

---
Changes in v3:
- fix compile error
Changes in v2:
- arch/arm/dts/rk3588s-rock-5-u-boot.dtsi: remove unused node
- include/configs/rock-5-rk3588s.h: fix include order

Quoted 9 lines
---
  arch/arm/dts/rk3588s-rock-5-u-boot.dtsi     | 16 ++++
  arch/arm/dts/rk3588s-rock-5c-u-boot.dtsi    |  6 ++
  arch/arm/mach-rockchip/rk3588/Kconfig       |  7 ++
  board/radxa/rock-5-rk3588s/Kconfig          | 12 +++
  board/radxa/rock-5-rk3588s/MAINTAINERS      |  8 ++
  board/radxa/rock-5-rk3588s/Makefile         |  3 +
  board/radxa/rock-5-rk3588s/rock-5-rk3588s.c | 77 +++++++++++++++++
  configs/rock-5-rk3588s_defconfig            | 94 +++++++++++++++++++++

I have go through the discuss between you and Quentin.

First, please make it clear which boards do you want to support in this config;

Second, I would like you to use rock5/rock5c-rk3588 like all other boards instead of rock-5-rk3588.

Thanks,

- Kever

Quoted 328 lines
  doc/board/rockchip/rockchip.rst             |  1 +
  include/configs/rock-5-rk3588s.h            | 15 ++++
  10 files changed, 239 insertions(+)

create mode 100644 arch/arm/dts/rk3588s-rock-5-u-boot.dtsi create mode 100644 arch/arm/dts/rk3588s-rock-5c-u-boot.dtsi create mode 100644 board/radxa/rock-5-rk3588s/Kconfig create mode 100644 board/radxa/rock-5-rk3588s/MAINTAINERS create mode 100644 board/radxa/rock-5-rk3588s/Makefile create mode 100644 board/radxa/rock-5-rk3588s/rock-5-rk3588s.c create mode 100644 configs/rock-5-rk3588s_defconfig create mode 100644 include/configs/rock-5-rk3588s.h

arch/arm/dts/rk3588s-rock-5-u-boot.dtsi new file +16 -0
new file mode 100644
index 000000000000..be1a2f9ae7bb
@@ -0,0 +1,16 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2024 Radxa Computer (Shenzhen) Co., Ltd.
+ */
+
+#include "rk3588s-u-boot.dtsi"
+
+&saradc {
+	bootph-pre-ram;
+	vdd-microvolts = <1800000>;
+};
+
+&sdhci {
+	cap-mmc-highspeed;
+	mmc-hs200-1_8v;
+};
arch/arm/dts/rk3588s-rock-5c-u-boot.dtsi new file +6 -0
new file mode 100644
index 000000000000..bb1cc9e4a279
@@ -0,0 +1,6 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2024 Radxa Computer (Shenzhen) Co., Ltd.
+ */
+
+#include "rk3588s-rock-5-u-boot.dtsi"
arch/arm/mach-rockchip/rk3588/Kconfig +7 -0
index b5a0e624a532..e1487ecb0464 100644
@@ -260,6 +260,12 @@ config TARGET_ROCK_5_ITX_RK3588
  	  Front-panel connectors for audio and case-power, -leds
  	  Powered by either 12V, ATX power-supply or PoE
 
+config TARGET_ROCK_5_RK3588S
+	bool "Radxa ROCK 5C RK3588S2 board"
+	select BOARD_LATE_INIT
+	help
+	  Radxa ROCK 5C is a Rockchip RK3588S2 based single board computer.
+
  config TARGET_SIGE7_RK3588
  	bool "ArmSoM Sige7 RK3588 board"
  	select BOARD_LATE_INIT
@@ -398,6 +404,7 @@ source "board/turing/turing-rk1-rk3588/Kconfig"
  source "board/radxa/rock5a-rk3588s/Kconfig"
  source "board/radxa/rock5b-rk3588/Kconfig"
  source "board/radxa/rock-5-itx-rk3588/Kconfig"
+source "board/radxa/rock-5-rk3588s/Kconfig"
  source "board/rockchip/evb_rk3588/Kconfig"
  source "board/rockchip/toybrick_rk3588/Kconfig"
  source "board/theobroma-systems/jaguar_rk3588/Kconfig"
board/radxa/rock-5-rk3588s/Kconfig new file +12 -0
new file mode 100644
index 000000000000..86830be1eeca
@@ -0,0 +1,12 @@
+if TARGET_ROCK_5_RK3588S
+
+config SYS_BOARD
+	default "rock-5-rk3588s"
+
+config SYS_VENDOR
+	default "radxa"
+
+config SYS_CONFIG_NAME
+	default "rock-5-rk3588s"
+
+endif
board/radxa/rock-5-rk3588s/MAINTAINERS new file +8 -0
new file mode 100644
index 000000000000..ead6356131c1
@@ -0,0 +1,8 @@
+ROCK-5-RK3588S
+M:	FUKAUMI Naoki <[email protected]>
+S:	Maintained
+F:	arch/arm/dts/rk3588s-rock-5-u-boot.dtsi
+F:	arch/arm/dts/rk3588s-rock-5c-u-boot.dtsi
+F:	board/radxa/rock-5-rk3588s/
+F:	configs/rock-5-rk3588s_defconfig
+F:	include/configs/rock-5-rk3588s.h
board/radxa/rock-5-rk3588s/Makefile new file +3 -0
new file mode 100644
index 000000000000..d9be0f42e6b9
@@ -0,0 +1,3 @@
+# SPDX-License-Identifier: GPL-2.0+
+
+obj-y += rock-5-rk3588s.o
board/radxa/rock-5-rk3588s/rock-5-rk3588s.c new file +77 -0
new file mode 100644
index 000000000000..a840ca7698d4
@@ -0,0 +1,77 @@
+// SPDX-License-Identifier: GPL-2.0+
+
+#include <linux/errno.h>
+#include <linux/kernel.h>
+#include <adc.h>
+#include <env.h>
+
+#define BOARD_ID	5
+
+struct board_model {
+	unsigned int low;
+	unsigned int high;
+	const char *board;
+	const char *board_name;
+	const char *fdtfile;
+};
+
+static const struct board_model board_models[] = {
+	{
+		0,
+		50,
+		"rock-5a-rk3588s",
+		"Radxa ROCK 5A",
+		"rockchip/rk3588s-rock-5a.dtb",
+	},
+	{
+		2375,
+		2425,
+		"rock-5c-rk3588s",
+		"Radxa ROCK 5C",
+		"rockchip/rk3588s-rock-5c.dtb"
+	},
+};
+
+static const struct board_model *get_board_model(void)
+{
+	unsigned int val;
+	int i, ret;
+
+	ret = adc_channel_single_shot("adc@fec10000", BOARD_ID, &val);
+	debug("adc_channel_single_shot ret %d val %u\n", ret, val);
+	if (ret)
+		return NULL;
+
+	for (i = 0; i < ARRAY_SIZE(board_models); i++) {
+		unsigned int min = board_models[i].low;
+		unsigned int max = board_models[i].high;
+
+		if (min <= val && val <= max)
+			return &board_models[i];
+	}
+
+	return NULL;
+}
+
+int rk_board_late_init(void)
+{
+	const struct board_model *model = get_board_model();
+
+	if (model) {
+		env_set("board", model->board);
+		env_set("board_name", model->board_name);
+		env_set("fdtfile", model->fdtfile);
+	}
+
+	return 0;
+}
+
+int board_fit_config_name_match(const char *name)
+{
+	const struct board_model *model = get_board_model();
+
+	if (model && !strcmp(name, model->fdtfile))
+		return 0;
+
+	return -ENOENT;
+}
configs/rock-5-rk3588s_defconfig new file +94 -0
new file mode 100644
index 000000000000..54043264de48
@@ -0,0 +1,94 @@
+CONFIG_ARM=y
+CONFIG_SKIP_LOWLEVEL_INIT=y
+CONFIG_SYS_HAS_NONCACHED_MEMORY=y
+CONFIG_COUNTER_FREQUENCY=24000000
+CONFIG_ARCH_ROCKCHIP=y
+CONFIG_DEFAULT_DEVICE_TREE="rockchip/rk3588s-rock-5a"
+CONFIG_ROCKCHIP_RK3588=y
+CONFIG_SPL_SERIAL=y
+CONFIG_TARGET_ROCK_5_RK3588S=y
+CONFIG_SYS_LOAD_ADDR=0xc00800
+CONFIG_DEBUG_UART_BASE=0xFEB50000
+CONFIG_DEBUG_UART_CLOCK=24000000
+CONFIG_PCI=y
+CONFIG_DEBUG_UART=y
+CONFIG_AHCI=y
+CONFIG_FIT=y
+CONFIG_FIT_VERBOSE=y
+CONFIG_SPL_FIT_SIGNATURE=y
+CONFIG_SPL_LOAD_FIT=y
+CONFIG_LEGACY_IMAGE_FORMAT=y
+CONFIG_DEFAULT_FDT_FILE="rockchip/rk3588s-rock-5a.dtb"
+# CONFIG_DISPLAY_CPUINFO is not set
+CONFIG_DISPLAY_BOARDINFO_LATE=y
+CONFIG_SPL_MAX_SIZE=0x40000
+CONFIG_SPL_PAD_TO=0x7f8000
+# CONFIG_SPL_RAW_IMAGE_SUPPORT is not set
+CONFIG_SPL_ATF=y
+CONFIG_CMD_ADC=y
+CONFIG_CMD_GPIO=y
+CONFIG_CMD_PWM=y
+CONFIG_CMD_GPT=y
+CONFIG_CMD_I2C=y
+CONFIG_CMD_MMC=y
+CONFIG_CMD_PCI=y
+CONFIG_CMD_USB=y
+# CONFIG_CMD_SETEXPR is not set
+CONFIG_CMD_PMIC=y
+CONFIG_CMD_REGULATOR=y
+# CONFIG_SPL_DOS_PARTITION is not set
+CONFIG_SPL_OF_CONTROL=y
+CONFIG_OF_LIVE=y
+CONFIG_OF_LIST="rockchip/rk3588s-rock-5a rockchip/rk3588s-rock-5c"
+CONFIG_OF_SPL_REMOVE_PROPS="clock-names interrupt-parent assigned-clocks assigned-clock-rates assigned-clock-parents"
+CONFIG_SYS_RELOC_GD_ENV_ADDR=y
+CONFIG_SPL_DM_SEQ_ALIAS=y
+CONFIG_SPL_REGMAP=y
+CONFIG_SPL_SYSCON=y
+CONFIG_SPL_ADC=y
+CONFIG_SCSI_AHCI=y
+CONFIG_AHCI_PCI=y
+CONFIG_SPL_CLK=y
+CONFIG_ROCKCHIP_GPIO=y
+CONFIG_SYS_I2C_ROCKCHIP=y
+CONFIG_LED=y
+CONFIG_LED_PWM=y
+CONFIG_LED_GPIO=y
+CONFIG_MISC=y
+CONFIG_SUPPORT_EMMC_RPMB=y
+CONFIG_MMC_DW=y
+CONFIG_MMC_DW_ROCKCHIP=y
+CONFIG_MMC_SDHCI=y
+CONFIG_MMC_SDHCI_SDMA=y
+CONFIG_MMC_SDHCI_ROCKCHIP=y
+CONFIG_PHY_REALTEK=y
+CONFIG_DWC_ETH_QOS=y
+CONFIG_DWC_ETH_QOS_ROCKCHIP=y
+CONFIG_RTL8169=y
+CONFIG_NVME_PCI=y
+CONFIG_PCIE_DW_ROCKCHIP=y
+CONFIG_PHY_ROCKCHIP_INNO_USB2=y
+CONFIG_PHY_ROCKCHIP_NANENG_COMBOPHY=y
+CONFIG_PHY_ROCKCHIP_USBDP=y
+CONFIG_SPL_PINCTRL=y
+CONFIG_DM_PMIC=y
+CONFIG_PMIC_RK8XX=y
+CONFIG_REGULATOR_RK8XX=y
+CONFIG_PWM_ROCKCHIP=y
+CONFIG_SPL_RAM=y
+CONFIG_SCSI=y
+CONFIG_BAUDRATE=1500000
+CONFIG_DEBUG_UART_SHIFT=2
+CONFIG_SYS_NS16550_MEM32=y
+CONFIG_ROCKCHIP_SPI=y
+CONFIG_SYSRESET=y
+CONFIG_SYSRESET_PSCI=y
+CONFIG_USB=y
+CONFIG_USB_XHCI_HCD=y
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_EHCI_GENERIC=y
+CONFIG_USB_OHCI_HCD=y
+CONFIG_USB_OHCI_GENERIC=y
+CONFIG_USB_DWC3=y
+CONFIG_USB_DWC3_GENERIC=y
+CONFIG_ERRNO_STR=y
doc/board/rockchip/rockchip.rst +1 -0
index 9bab86d23479..6b952654cb3d 100644
@@ -141,6 +141,7 @@ List of mainline supported Rockchip boards:
       - Radxa ROCK 5 ITX (rock-5-itx-rk3588)
       - Radxa ROCK 5A (rock5a-rk3588s)
       - Radxa ROCK 5B (rock5b-rk3588)
+     - Radxa ROCK 5C (rock-5-rk3588s)
       - Rockchip Toybrick TB-RK3588X (toybrick-rk3588)
       - Theobroma Systems RK3588-SBC Jaguar (jaguar-rk3588)
       - Theobroma Systems SOM-RK3588-Q7 - Tiger (tiger-rk3588)
include/configs/rock-5-rk3588s.h new file +15 -0
new file mode 100644
index 000000000000..8020177d7585
@@ -0,0 +1,15 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (c) 2024 Radxa Computer (Shenzhen) Co., Ltd.
+ */
+
+#ifndef __ROCK_5_RK3588S_H
+#define __ROCK_5_RK3588S_H
+
+#define ROCKCHIP_DEVICE_SETTINGS \
+		"stdout=serial,vidconsole\0" \
+		"stderr=serial,vidconsole\0"
+
+#include <configs/rk3588_common.h>
+
+#endif /* __ROCK_5_RK3588S_H */
#14 lore raw

Hi Kever,

Quoted 24 lines · Kever Yang

Hi Naoki,

Quoted 5 lines · FUKAUMI Naoki

Radxa ROCK 5C[1] is a Rockchip RK3588S2 based single board computer.

[1] https://radxa.com/products/rock5/5c

Quoted 15 lines

---
Changes in v3:
- fix compile error
Changes in v2:
- arch/arm/dts/rk3588s-rock-5-u-boot.dtsi: remove unused node
- include/configs/rock-5-rk3588s.h: fix include order
---
  arch/arm/dts/rk3588s-rock-5-u-boot.dtsi     | 16 ++++ arch/arm/dts/rk3588s-rock-5c-u-boot.dtsi    |  6 ++ arch/arm/mach-rockchip/rk3588/Kconfig       |  7 ++ board/radxa/rock-5-rk3588s/Kconfig          | 12 +++ board/radxa/rock-5-rk3588s/MAINTAINERS      |  8 ++ board/radxa/rock-5-rk3588s/Makefile         |  3 + board/radxa/rock-5-rk3588s/rock-5-rk3588s.c | 77 +++++++++++++++++ configs/rock-5-rk3588s_defconfig            | 94 +++++++++++++++++++++

Quoted 1 line

I have go through the discuss between you and Quentin.

Thanks.

Quoted 1 line

First, please make it clear which boards do you want to support in this config;

Radxa ROCK 5C only. Currently updating patch.

Quoted 1 line

Second, I would like you to use rock5/rock5c-rk3588 like all other boards instead of rock-5-rk3588.

All other Radxa ROCK boards (except ROCK 5A and ROCK 5B) use the rock- prefix (e.g. ROCK 5 ITX uses rock-5-itx), so I would like to use rock-5c.

There is a space(" ") between ROCK and 5.

Best regards,

--
FUKAUMI Naoki
Radxa Computer (Shenzhen) Co., Ltd.

Quoted 333 lines

Thanks,

- Kever

Quoted 328 lines

  doc/board/rockchip/rockchip.rst             |  1 + include/configs/rock-5-rk3588s.h            | 15 ++++

  10 files changed, 239 insertions(+)

  create mode 100644 arch/arm/dts/rk3588s-rock-5-u-boot.dtsi create mode 100644 arch/arm/dts/rk3588s-rock-5c-u-boot.dtsi create mode 100644 board/radxa/rock-5-rk3588s/Kconfig create mode 100644 board/radxa/rock-5-rk3588s/MAINTAINERS create mode 100644 board/radxa/rock-5-rk3588s/Makefile create mode 100644 board/radxa/rock-5-rk3588s/rock-5-rk3588s.c create mode 100644 configs/rock-5-rk3588s_defconfig create mode 100644 include/configs/rock-5-rk3588s.h

arch/arm/dts/rk3588s-rock-5-u-boot.dtsi new file +16 -0
new file mode 100644
index 000000000000..be1a2f9ae7bb
@@ -0,0 +1,16 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2024 Radxa Computer (Shenzhen) Co., Ltd.
+ */
+
+#include "rk3588s-u-boot.dtsi"
+
+&saradc {
+    bootph-pre-ram;
+    vdd-microvolts = <1800000>;
+};
+
+&sdhci {
+    cap-mmc-highspeed;
+    mmc-hs200-1_8v;
+};
arch/arm/dts/rk3588s-rock-5c-u-boot.dtsi new file +6 -0
new file mode 100644
index 000000000000..bb1cc9e4a279
@@ -0,0 +1,6 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2024 Radxa Computer (Shenzhen) Co., Ltd.
+ */
+
+#include "rk3588s-rock-5-u-boot.dtsi"
arch/arm/mach-rockchip/rk3588/Kconfig +0 -0
index b5a0e624a532..e1487ecb0464 100644
@@ -260,6 +260,12 @@ config TARGET_ROCK_5_ITX_RK3588

        Front-panel connectors for audio and case-power, -leds Powered by either 12V, ATX power-supply or PoE

arch/arm/mach-rockchip/rk3588/Kconfig +6 -0
+config TARGET_ROCK_5_RK3588S
+    bool "Radxa ROCK 5C RK3588S2 board"
+    select BOARD_LATE_INIT
+    help
+      Radxa ROCK 5C is a Rockchip RK3588S2 based single board computer.
+

  config TARGET_SIGE7_RK3588
      bool "ArmSoM Sige7 RK3588 board"
      select BOARD_LATE_INIT

arch/arm/mach-rockchip/rk3588/Kconfig +0 -0
@@ -398,6 +404,7 @@ source "board/turing/turing-rk1-rk3588/Kconfig"

  source "board/radxa/rock5a-rk3588s/Kconfig" source "board/radxa/rock5b-rk3588/Kconfig" source "board/radxa/rock-5-itx-rk3588/Kconfig" +source "board/radxa/rock-5-rk3588s/Kconfig" source "board/rockchip/evb_rk3588/Kconfig" source "board/rockchip/toybrick_rk3588/Kconfig" source "board/theobroma-systems/jaguar_rk3588/Kconfig"

board/radxa/rock-5-rk3588s/Kconfig new file +12 -0
new file mode 100644
index 000000000000..86830be1eeca
@@ -0,0 +1,12 @@
+if TARGET_ROCK_5_RK3588S
+
+config SYS_BOARD
+    default "rock-5-rk3588s"
+
+config SYS_VENDOR
+    default "radxa"
+
+config SYS_CONFIG_NAME
+    default "rock-5-rk3588s"
+
+endif
board/radxa/rock-5-rk3588s/MAINTAINERS new file +8 -0
new file mode 100644
index 000000000000..ead6356131c1
@@ -0,0 +1,8 @@
+ROCK-5-RK3588S
+M:    FUKAUMI Naoki <[email protected]>
+S:    Maintained
+F:    arch/arm/dts/rk3588s-rock-5-u-boot.dtsi
+F:    arch/arm/dts/rk3588s-rock-5c-u-boot.dtsi
+F:    board/radxa/rock-5-rk3588s/
+F:    configs/rock-5-rk3588s_defconfig
+F:    include/configs/rock-5-rk3588s.h
board/radxa/rock-5-rk3588s/Makefile new file +3 -0
new file mode 100644
index 000000000000..d9be0f42e6b9
@@ -0,0 +1,3 @@
+# SPDX-License-Identifier: GPL-2.0+
+
+obj-y += rock-5-rk3588s.o
board/radxa/rock-5-rk3588s/rock-5-rk3588s.c new file +77 -0
new file mode 100644
index 000000000000..a840ca7698d4
@@ -0,0 +1,77 @@
+// SPDX-License-Identifier: GPL-2.0+
+
+#include <linux/errno.h>
+#include <linux/kernel.h>
+#include <adc.h>
+#include <env.h>
+
+#define BOARD_ID    5
+
+struct board_model {
+    unsigned int low;
+    unsigned int high;
+    const char *board;
+    const char *board_name;
+    const char *fdtfile;
+};
+
+static const struct board_model board_models[] = {
+    {
+        0,
+        50,
+        "rock-5a-rk3588s",
+        "Radxa ROCK 5A",
+        "rockchip/rk3588s-rock-5a.dtb",
+    },
+    {
+        2375,
+        2425,
+        "rock-5c-rk3588s",
+        "Radxa ROCK 5C",
+        "rockchip/rk3588s-rock-5c.dtb"
+    },
+};
+
+static const struct board_model *get_board_model(void)
+{
+    unsigned int val;
+    int i, ret;
+
+    ret = adc_channel_single_shot("adc@fec10000", BOARD_ID, &val);
+    debug("adc_channel_single_shot ret %d val %u\n", ret, val);
+    if (ret)
+        return NULL;
+
+    for (i = 0; i < ARRAY_SIZE(board_models); i++) {
+        unsigned int min = board_models[i].low;
+        unsigned int max = board_models[i].high;
+
+        if (min <= val && val <= max)
+            return &board_models[i];
+    }
+
+    return NULL;
+}
+
+int rk_board_late_init(void)
+{
+    const struct board_model *model = get_board_model();
+
+    if (model) {
+        env_set("board", model->board);
+        env_set("board_name", model->board_name);
+        env_set("fdtfile", model->fdtfile);
+    }
+
+    return 0;
+}
+
+int board_fit_config_name_match(const char *name)
+{
+    const struct board_model *model = get_board_model();
+
+    if (model && !strcmp(name, model->fdtfile))
+        return 0;
+
+    return -ENOENT;
+}
configs/rock-5-rk3588s_defconfig new file +43 -0
new file mode 100644
index 000000000000..54043264de48
@@ -0,0 +1,94 @@
+CONFIG_ARM=y
+CONFIG_SKIP_LOWLEVEL_INIT=y
+CONFIG_SYS_HAS_NONCACHED_MEMORY=y
+CONFIG_COUNTER_FREQUENCY=24000000
+CONFIG_ARCH_ROCKCHIP=y
+CONFIG_DEFAULT_DEVICE_TREE="rockchip/rk3588s-rock-5a"
+CONFIG_ROCKCHIP_RK3588=y
+CONFIG_SPL_SERIAL=y
+CONFIG_TARGET_ROCK_5_RK3588S=y
+CONFIG_SYS_LOAD_ADDR=0xc00800
+CONFIG_DEBUG_UART_BASE=0xFEB50000
+CONFIG_DEBUG_UART_CLOCK=24000000
+CONFIG_PCI=y
+CONFIG_DEBUG_UART=y
+CONFIG_AHCI=y
+CONFIG_FIT=y
+CONFIG_FIT_VERBOSE=y
+CONFIG_SPL_FIT_SIGNATURE=y
+CONFIG_SPL_LOAD_FIT=y
+CONFIG_LEGACY_IMAGE_FORMAT=y
+CONFIG_DEFAULT_FDT_FILE="rockchip/rk3588s-rock-5a.dtb"
+# CONFIG_DISPLAY_CPUINFO is not set
+CONFIG_DISPLAY_BOARDINFO_LATE=y
+CONFIG_SPL_MAX_SIZE=0x40000
+CONFIG_SPL_PAD_TO=0x7f8000
+# CONFIG_SPL_RAW_IMAGE_SUPPORT is not set
+CONFIG_SPL_ATF=y
+CONFIG_CMD_ADC=y
+CONFIG_CMD_GPIO=y
+CONFIG_CMD_PWM=y
+CONFIG_CMD_GPT=y
+CONFIG_CMD_I2C=y
+CONFIG_CMD_MMC=y
+CONFIG_CMD_PCI=y
+CONFIG_CMD_USB=y
+# CONFIG_CMD_SETEXPR is not set
+CONFIG_CMD_PMIC=y
+CONFIG_CMD_REGULATOR=y
+# CONFIG_SPL_DOS_PARTITION is not set
+CONFIG_SPL_OF_CONTROL=y
+CONFIG_OF_LIVE=y
+CONFIG_OF_LIST="rockchip/rk3588s-rock-5a rockchip/rk3588s-rock-5c"
+CONFIG_OF_SPL_REMOVE_PROPS="clock-names interrupt-parent assigned- 

clocks assigned-clock-rates assigned-clock-parents"

configs/rock-5-rk3588s_defconfig new file +51 -0
+CONFIG_SYS_RELOC_GD_ENV_ADDR=y
+CONFIG_SPL_DM_SEQ_ALIAS=y
+CONFIG_SPL_REGMAP=y
+CONFIG_SPL_SYSCON=y
+CONFIG_SPL_ADC=y
+CONFIG_SCSI_AHCI=y
+CONFIG_AHCI_PCI=y
+CONFIG_SPL_CLK=y
+CONFIG_ROCKCHIP_GPIO=y
+CONFIG_SYS_I2C_ROCKCHIP=y
+CONFIG_LED=y
+CONFIG_LED_PWM=y
+CONFIG_LED_GPIO=y
+CONFIG_MISC=y
+CONFIG_SUPPORT_EMMC_RPMB=y
+CONFIG_MMC_DW=y
+CONFIG_MMC_DW_ROCKCHIP=y
+CONFIG_MMC_SDHCI=y
+CONFIG_MMC_SDHCI_SDMA=y
+CONFIG_MMC_SDHCI_ROCKCHIP=y
+CONFIG_PHY_REALTEK=y
+CONFIG_DWC_ETH_QOS=y
+CONFIG_DWC_ETH_QOS_ROCKCHIP=y
+CONFIG_RTL8169=y
+CONFIG_NVME_PCI=y
+CONFIG_PCIE_DW_ROCKCHIP=y
+CONFIG_PHY_ROCKCHIP_INNO_USB2=y
+CONFIG_PHY_ROCKCHIP_NANENG_COMBOPHY=y
+CONFIG_PHY_ROCKCHIP_USBDP=y
+CONFIG_SPL_PINCTRL=y
+CONFIG_DM_PMIC=y
+CONFIG_PMIC_RK8XX=y
+CONFIG_REGULATOR_RK8XX=y
+CONFIG_PWM_ROCKCHIP=y
+CONFIG_SPL_RAM=y
+CONFIG_SCSI=y
+CONFIG_BAUDRATE=1500000
+CONFIG_DEBUG_UART_SHIFT=2
+CONFIG_SYS_NS16550_MEM32=y
+CONFIG_ROCKCHIP_SPI=y
+CONFIG_SYSRESET=y
+CONFIG_SYSRESET_PSCI=y
+CONFIG_USB=y
+CONFIG_USB_XHCI_HCD=y
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_EHCI_GENERIC=y
+CONFIG_USB_OHCI_HCD=y
+CONFIG_USB_OHCI_GENERIC=y
+CONFIG_USB_DWC3=y
+CONFIG_USB_DWC3_GENERIC=y
+CONFIG_ERRNO_STR=y
doc/board/rockchip/rockchip.rst +1 -0
index 9bab86d23479..6b952654cb3d 100644
@@ -141,6 +141,7 @@ List of mainline supported Rockchip boards:
        - Radxa ROCK 5 ITX (rock-5-itx-rk3588)
        - Radxa ROCK 5A (rock5a-rk3588s)
        - Radxa ROCK 5B (rock5b-rk3588)
+     - Radxa ROCK 5C (rock-5-rk3588s)
        - Rockchip Toybrick TB-RK3588X (toybrick-rk3588)
        - Theobroma Systems RK3588-SBC Jaguar (jaguar-rk3588)
        - Theobroma Systems SOM-RK3588-Q7 - Tiger (tiger-rk3588)
include/configs/rock-5-rk3588s.h new file +15 -0
new file mode 100644
index 000000000000..8020177d7585
@@ -0,0 +1,15 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (c) 2024 Radxa Computer (Shenzhen) Co., Ltd.
+ */
+
+#ifndef __ROCK_5_RK3588S_H
+#define __ROCK_5_RK3588S_H
+
+#define ROCKCHIP_DEVICE_SETTINGS \
+        "stdout=serial,vidconsole\0" \
+        "stderr=serial,vidconsole\0"
+
+#include <configs/rk3588_common.h>
+
+#endif /* __ROCK_5_RK3588S_H */