Skip to contentSkip to conversation

arm64: dts: rockchip: Use PWM to drive blue LED on ROCK 5A/5C

PATCH New FUKAUMI Naoki 1 participant 1 message Dec 16, 2024

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

PATCH v3 1/1 arm64: dts: rockchip: Use PWM to drive blue LED on ROCK 5A/5C

The pin connected to the blue LED, GPIO3_D5, is not only a GPIO but also has a PWM function. Using PWM, the user can change the brightness of the LED.

Convert blue LED from "gpio-leds" to "pwm-leds" and enable related PWM.

---
this patch depends on [1] which depends on [2].

[1] https://patchwork.kernel.org/project/linux-rockchip/cover/[email protected]/
[2] https://patchwork.kernel.org/project/linux-rockchip/cover/[email protected]/
---
Changes in v3:
- Reword subject
Changes in v2:
- Reword commit message

---
 .../boot/dts/rockchip/rk3588s-rock-5.dtsi     | 34 ++++++++++++-------
 1 file changed, 22 insertions(+), 12 deletions(-)
arch/arm64/boot/dts/rockchip/rk3588s-rock-5.dtsi +22 -12
index d0b9513d56a7..d72314d917da 100644
@@ -46,7 +46,7 @@ hdmi0_con_in: endpoint {
 	leds {
 		compatible = "gpio-leds";
 		pinctrl-names = "default";
-		pinctrl-0 = <&led_pins>;
+		pinctrl-0 = <&led_pin>;
 
 		led-0 {
 			color = <LED_COLOR_ID_GREEN>;
@@ -54,14 +54,6 @@ led-0 {
 			function = LED_FUNCTION_POWER;
 			gpios = <&gpio3 RK_PC4 GPIO_ACTIVE_HIGH>;
 		};
-
-		led-1 {
-			color = <LED_COLOR_ID_BLUE>;
-			default-state = "on";
-			function = LED_FUNCTION_STATUS;
-			gpios = <&gpio3 RK_PD5 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "heartbeat";
-		};
 	};
 
 	fan: pwm-fan {
@@ -72,6 +64,19 @@ fan: pwm-fan {
 		pwms = <&pwm3 0 60000 0>;
 	};
 
+	pwm-leds {
+		compatible = "pwm-leds";
+
+		led-1 {
+			color = <LED_COLOR_ID_BLUE>;
+			default-state = "on";
+			function = LED_FUNCTION_STATUS;
+			linux,default-trigger = "heartbeat";
+			pwms = <&pwm11 0 1000000 0>;
+			max-brightness = <255>;
+		};
+	};
+
 	vbus_typec: regulator-vbus-typec {
 		compatible = "regulator-fixed";
 		regulator-name = "vbus_typec";
@@ -422,9 +427,8 @@ &pcie2x1l2 {
 
 &pinctrl {
 	leds {
-		led_pins: led-pins {
-			rockchip,pins = <3 RK_PC4 RK_FUNC_GPIO &pcfg_pull_none>,
-					<3 RK_PD5 RK_FUNC_GPIO &pcfg_pull_none>;
+		led_pin: led-pin {
+			rockchip,pins = <3 RK_PC4 RK_FUNC_GPIO &pcfg_pull_none>;
 		};
 	};
 
@@ -467,6 +471,12 @@ &pwm3 {
 	status = "okay";
 };
 
+&pwm11 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pwm11m3_pins>;
+	status = "okay";
+};
+
 &saradc {
 	vref-supply = <&vcca_1v8_s0>;
 	status = "okay";
Signature · 1 line
2.43.0