arm64: dts: rockchip: Use PWM to drive blue LED on ROCK 5A/5C
Subsystems (2)
PATCH v3 1/1 arm64: dts: rockchip: Use PWM to drive blue LED on ROCK 5A/5C
The pin connected to the blue LED, GPIO3_D5, is not only a GPIO but also has a PWM function. Using PWM, the user can change the brightness of the LED.
Convert blue LED from "gpio-leds" to "pwm-leds" and enable related PWM.
Acked-by Dragan Simic <[email protected]>
Signed-off-by FUKAUMI Naoki <[email protected]>
---
this patch depends on [1] which depends on [2].
[1] https://patchwork.kernel.org/project/linux-rockchip/cover/[email protected]/
[2] https://patchwork.kernel.org/project/linux-rockchip/cover/[email protected]/
---
Changes in v3:
- Reword subject
Changes in v2:
- Reword commit message
--- .../boot/dts/rockchip/rk3588s-rock-5.dtsi | 34 ++++++++++++------- 1 file changed, 22 insertions(+), 12 deletions(-)
arch/arm64/boot/dts/rockchip/rk3588s-rock-5.dtsi +22 -12
@@ -46,7 +46,7 @@ hdmi0_con_in: endpoint { leds { compatible = "gpio-leds"; pinctrl-names = "default"; - pinctrl-0 = <&led_pins>; + pinctrl-0 = <&led_pin>; led-0 { color = <LED_COLOR_ID_GREEN>;
@@ -54,14 +54,6 @@ led-0 { function = LED_FUNCTION_POWER; gpios = <&gpio3 RK_PC4 GPIO_ACTIVE_HIGH>; }; - - led-1 { - color = <LED_COLOR_ID_BLUE>; - default-state = "on"; - function = LED_FUNCTION_STATUS; - gpios = <&gpio3 RK_PD5 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "heartbeat"; - }; }; fan: pwm-fan {
@@ -72,6 +64,19 @@ fan: pwm-fan { pwms = <&pwm3 0 60000 0>; }; + pwm-leds { + compatible = "pwm-leds"; + + led-1 { + color = <LED_COLOR_ID_BLUE>; + default-state = "on"; + function = LED_FUNCTION_STATUS; + linux,default-trigger = "heartbeat"; + pwms = <&pwm11 0 1000000 0>; + max-brightness = <255>; + }; + }; + vbus_typec: regulator-vbus-typec { compatible = "regulator-fixed"; regulator-name = "vbus_typec";
@@ -422,9 +427,8 @@ &pcie2x1l2 { &pinctrl { leds { - led_pins: led-pins { - rockchip,pins = <3 RK_PC4 RK_FUNC_GPIO &pcfg_pull_none>, - <3 RK_PD5 RK_FUNC_GPIO &pcfg_pull_none>; + led_pin: led-pin { + rockchip,pins = <3 RK_PC4 RK_FUNC_GPIO &pcfg_pull_none>; }; };
@@ -467,6 +471,12 @@ &pwm3 { status = "okay"; }; +&pwm11 { + pinctrl-names = "default"; + pinctrl-0 = <&pwm11m3_pins>; + status = "okay"; +}; + &saradc { vref-supply = <&vcca_1v8_s0>; status = "okay";
Signature · 1 line
2.43.0