Skip to contentSkip to conversation

alienware-wmi driver rework

PATCH Superseded Kurt Borja 2 participants 61 messages Dec 21, 2024 – Dec 29, 2024

Subsystems (2)

v1 of 10 Superseded Latest is v10 →

lore
Share & tools
lore

Kurt Borja

author maintainer
#0 lore raw

cover alienware-wmi driver rework

Hi :)

Hopefully these series are quite complete now. Your feedback is much appreciated!

Previous discussions:

[1] https://lore.kernel.org/platform-driver-x86/6m66cuivkzhcsvpjv4nunjyddqhr42bmjdhptu4bqm6rm7fvxf@qjwove4hg6gb/
[2] https://lore.kernel.org/platform-driver-x86/[email protected]/

Comments
========

Patches 14 and 20 are proposals. Feel free to NACK them.

~ Kurt

---
Changes since RFC:
- Incorporated comments from Ilpo which include style and organization issues
- Instead of splitting functionallity blocks, split WMI drivers (Due to Armin's comments)
- Replaced most of the patches near the end because of the above change
- Some patches were squashed into eachother where it made sense
- Rebased on top of recent platform_profile changes!

Kurt Borja (20):
alienware-wmi: Remove unnecessary check at module exit
alienware-wmi: Move Lighting Control State
alienware-wmi: Modify parse_rgb() signature
alienware-wmi: Improve hdmi_mux, amplifier and deepslp group creation
alienware-wmi: Improve rgb-zones group creation
alienware_wmi: Clean variable declaration in thermal methods
alienware-wmi: Add a state container for LED control feature
alienware-wmi: Add WMI Drivers
alienware-wmi: Add a state container for thermal control methods
alienware-wmi: Refactor LED control methods
alienware-wmi: Refactor hdmi, amplifier, deepslp methods
alienware-wmi: Refactor thermal control methods
alienware-wmi: Split DMI table
MAINTAINERS: Update ALIENWARE WMI DRIVER entry platform/x86: Rename alienware-wmi.c
platform/x86: Add alienware-wmi.h
platform-x86: Split the alienware-wmi driver
platform/x86: dell: Modify Makefile alignment platform/x86: Update alienware-wmi config entries
alienware-wmi: Update header and module information

 MAINTAINERS                                   |    4 +-
 drivers/platform/x86/dell/Kconfig             |   30 +-
 drivers/platform/x86/dell/Makefile            |   45 +-
 .../platform/x86/dell/alienware-wmi-base.c    |  721 ++++++++++
 .../platform/x86/dell/alienware-wmi-legacy.c  |   89 ++
 .../platform/x86/dell/alienware-wmi-wmax.c    |  526 +++++++
 drivers/platform/x86/dell/alienware-wmi.c     | 1269 -----------------
 drivers/platform/x86/dell/alienware-wmi.h     |  103 ++
 8 files changed, 1491 insertions(+), 1296 deletions(-)
 create mode 100644 drivers/platform/x86/dell/alienware-wmi-base.c
 create mode 100644 drivers/platform/x86/dell/alienware-wmi-legacy.c
 create mode 100644 drivers/platform/x86/dell/alienware-wmi-wmax.c
 delete mode 100644 drivers/platform/x86/dell/alienware-wmi.c
 create mode 100644 drivers/platform/x86/dell/alienware-wmi.h
Signature · 1 line
2.47.1
author maintainer
#1 lore raw

PATCH 1/20 alienware-wmi: Remove unnecessary check at module exit

Module initialization fails if platform device fails to register so it's always not NULL at exit.

---
 drivers/platform/x86/dell/alienware-wmi.c | 12 +++++-------
 1 file changed, 5 insertions(+), 7 deletions(-)
drivers/platform/x86/dell/alienware-wmi.c +5 -7
index e95d22c7b60c..ed66720260ab 100644
@@ -1257,13 +1257,11 @@ module_init(alienware_wmi_init);
 
 static void __exit alienware_wmi_exit(void)
 {
-	if (platform_device) {
-		alienware_zone_exit(platform_device);
-		remove_hdmi(platform_device);
-		remove_thermal_profile();
-		platform_device_unregister(platform_device);
-		platform_driver_unregister(&platform_driver);
-	}
+	alienware_zone_exit(platform_device);
+	remove_hdmi(platform_device);
+	remove_thermal_profile();
+	platform_device_unregister(platform_device);
+	platform_driver_unregister(&platform_driver);
 }
 
 module_exit(alienware_wmi_exit);
Signature · 1 line
2.47.1
Reviewed-by on v1 1/20
#2 lore raw

Re: [PATCH 01/20] alienware-wmi: Remove unnecessary check at module exit

Am 21.12.24 um 06:58 schrieb Kurt Borja:

Quoted 2 lines

Module initialization fails if platform device fails to register so it's always not NULL at exit.

Quoted 30 lines
---
  drivers/platform/x86/dell/alienware-wmi.c | 12 +++++-------
  1 file changed, 5 insertions(+), 7 deletions(-)
drivers/platform/x86/dell/alienware-wmi.c +5 -7
index e95d22c7b60c..ed66720260ab 100644
@@ -1257,13 +1257,11 @@ module_init(alienware_wmi_init);
 
  static void __exit alienware_wmi_exit(void)
  {
-	if (platform_device) {
-		alienware_zone_exit(platform_device);
-		remove_hdmi(platform_device);
-		remove_thermal_profile();
-		platform_device_unregister(platform_device);
-		platform_driver_unregister(&platform_driver);
-	}
+	alienware_zone_exit(platform_device);
+	remove_hdmi(platform_device);
+	remove_thermal_profile();
+	platform_device_unregister(platform_device);
+	platform_driver_unregister(&platform_driver);
  }
 
  module_exit(alienware_wmi_exit);
author maintainer
#3 lore raw

PATCH 2/20 alienware-wmi: Move Lighting Control State

In reply to Kurt Borja

Place Lighting Control State logic next to other attributes of the same sysfs group.

While at it, rename:

store_control_state() -> lighting_control_state_store()
show_control_state() -> lighting_control_state_show()

Replace DEVICE_ATTR_RW() with DEVICE_ATTR() and do a general style cleanup.

---
 drivers/platform/x86/dell/alienware-wmi.c | 74 ++++++++++++-----------
 1 file changed, 39 insertions(+), 35 deletions(-)
drivers/platform/x86/dell/alienware-wmi.c +39 -35
index ed66720260ab..c5ad0f95c442 100644
@@ -545,6 +545,45 @@ static ssize_t zone_set(struct device *dev, struct device_attribute *attr,
 	return ret ? ret : count;
 }
 
+/*
+ * Lighting control state device attribute (Global)
+ */
+static ssize_t lighting_control_state_show(struct device *dev,
+					   struct device_attribute *attr,
+					   char *buf)
+{
+	if (lighting_control_state == LEGACY_BOOTING)
+		return sysfs_emit(buf, "[booting] running suspend\n");
+	else if (lighting_control_state == LEGACY_SUSPEND)
+		return sysfs_emit(buf, "booting running [suspend]\n");
+
+	return sysfs_emit(buf, "booting [running] suspend\n");
+}
+
+static ssize_t lighting_control_state_store(struct device *dev,
+					    struct device_attribute *attr,
+					    const char *buf, size_t count)
+{
+	u8 val;
+
+	if (strcmp(buf, "booting\n") == 0)
+		val = LEGACY_BOOTING;
+	else if (strcmp(buf, "suspend\n") == 0)
+		val = LEGACY_SUSPEND;
+	else if (interface == LEGACY)
+		val = LEGACY_RUNNING;
+	else
+		val = WMAX_RUNNING;
+
+	lighting_control_state = val;
+	pr_debug("alienware-wmi: updated control state to %d\n",
+		 lighting_control_state);
+
+	return count;
+}
+
+static DEVICE_ATTR_RW(lighting_control_state);
+
 /*
  * LED Brightness (Global)
  */
@@ -589,41 +628,6 @@ static struct led_classdev global_led = {
 	.name = "alienware::global_brightness",
 };
 
-/*
- * Lighting control state device attribute (Global)
- */
-static ssize_t show_control_state(struct device *dev,
-				  struct device_attribute *attr, char *buf)
-{
-	if (lighting_control_state == LEGACY_BOOTING)
-		return sysfs_emit(buf, "[booting] running suspend\n");
-	else if (lighting_control_state == LEGACY_SUSPEND)
-		return sysfs_emit(buf, "booting running [suspend]\n");
-	return sysfs_emit(buf, "booting [running] suspend\n");
-}
-
-static ssize_t store_control_state(struct device *dev,
-				   struct device_attribute *attr,
-				   const char *buf, size_t count)
-{
-	long unsigned int val;
-	if (strcmp(buf, "booting\n") == 0)
-		val = LEGACY_BOOTING;
-	else if (strcmp(buf, "suspend\n") == 0)
-		val = LEGACY_SUSPEND;
-	else if (interface == LEGACY)
-		val = LEGACY_RUNNING;
-	else
-		val = WMAX_RUNNING;
-	lighting_control_state = val;
-	pr_debug("alienware-wmi: updated control state to %d\n",
-		 lighting_control_state);
-	return count;
-}
-
-static DEVICE_ATTR(lighting_control_state, 0644, show_control_state,
-		   store_control_state);
-
 static int alienware_zone_init(struct platform_device *dev)
 {
 	u8 zone;
Signature · 1 line
2.47.1
Reviewed-by on v1 2/20
#4 lore raw

Re: [PATCH 02/20] alienware-wmi: Move Lighting Control State

Am 21.12.24 um 06:58 schrieb Kurt Borja:

Quoted 10 lines

Place Lighting Control State logic next to other attributes of the same sysfs group.

While at it, rename:

store_control_state() -> lighting_control_state_store()
show_control_state() -> lighting_control_state_show()

Replace DEVICE_ATTR_RW() with DEVICE_ATTR() and do a general style cleanup.

I think you mixed-up DEVICE_ATTR_RW() and DEVICE_ATTR() here. Other than that:

Quoted 98 lines
---
  drivers/platform/x86/dell/alienware-wmi.c | 74 ++++++++++++-----------
  1 file changed, 39 insertions(+), 35 deletions(-)
drivers/platform/x86/dell/alienware-wmi.c +39 -35
index ed66720260ab..c5ad0f95c442 100644
@@ -545,6 +545,45 @@ static ssize_t zone_set(struct device *dev, struct device_attribute *attr,
  	return ret ? ret : count;
  }
 
+/*
+ * Lighting control state device attribute (Global)
+ */
+static ssize_t lighting_control_state_show(struct device *dev,
+					   struct device_attribute *attr,
+					   char *buf)
+{
+	if (lighting_control_state == LEGACY_BOOTING)
+		return sysfs_emit(buf, "[booting] running suspend\n");
+	else if (lighting_control_state == LEGACY_SUSPEND)
+		return sysfs_emit(buf, "booting running [suspend]\n");
+
+	return sysfs_emit(buf, "booting [running] suspend\n");
+}
+
+static ssize_t lighting_control_state_store(struct device *dev,
+					    struct device_attribute *attr,
+					    const char *buf, size_t count)
+{
+	u8 val;
+
+	if (strcmp(buf, "booting\n") == 0)
+		val = LEGACY_BOOTING;
+	else if (strcmp(buf, "suspend\n") == 0)
+		val = LEGACY_SUSPEND;
+	else if (interface == LEGACY)
+		val = LEGACY_RUNNING;
+	else
+		val = WMAX_RUNNING;
+
+	lighting_control_state = val;
+	pr_debug("alienware-wmi: updated control state to %d\n",
+		 lighting_control_state);
+
+	return count;
+}
+
+static DEVICE_ATTR_RW(lighting_control_state);
+
  /*
   * LED Brightness (Global)
   */
@@ -589,41 +628,6 @@ static struct led_classdev global_led = {
  	.name = "alienware::global_brightness",
  };
 
-/*
- * Lighting control state device attribute (Global)
- */
-static ssize_t show_control_state(struct device *dev,
-				  struct device_attribute *attr, char *buf)
-{
-	if (lighting_control_state == LEGACY_BOOTING)
-		return sysfs_emit(buf, "[booting] running suspend\n");
-	else if (lighting_control_state == LEGACY_SUSPEND)
-		return sysfs_emit(buf, "booting running [suspend]\n");
-	return sysfs_emit(buf, "booting [running] suspend\n");
-}
-
-static ssize_t store_control_state(struct device *dev,
-				   struct device_attribute *attr,
-				   const char *buf, size_t count)
-{
-	long unsigned int val;
-	if (strcmp(buf, "booting\n") == 0)
-		val = LEGACY_BOOTING;
-	else if (strcmp(buf, "suspend\n") == 0)
-		val = LEGACY_SUSPEND;
-	else if (interface == LEGACY)
-		val = LEGACY_RUNNING;
-	else
-		val = WMAX_RUNNING;
-	lighting_control_state = val;
-	pr_debug("alienware-wmi: updated control state to %d\n",
-		 lighting_control_state);
-	return count;
-}
-
-static DEVICE_ATTR(lighting_control_state, 0644, show_control_state,
-		   store_control_state);
-
  static int alienware_zone_init(struct platform_device *dev)
  {
  	u8 zone;
author maintainer
#5 lore raw

Re: [PATCH 02/20] alienware-wmi: Move Lighting Control State

Quoted 7 lines · Armin Wolf

Am 21.12.24 um 06:58 schrieb Kurt Borja:

Quoted 5 lines

Place Lighting Control State logic next to other attributes of the same sysfs group.

While at it, rename:

Quoted 8 lines
Quoted 5 lines

store_control_state() -> lighting_control_state_store()
show_control_state() -> lighting_control_state_show()

Replace DEVICE_ATTR_RW() with DEVICE_ATTR() and do a general style cleanup.

I think you mixed-up DEVICE_ATTR_RW() and DEVICE_ATTR() here. Other than that:

Fixed in v2!

Quoted 101 lines
Quoted 98 lines
---
  drivers/platform/x86/dell/alienware-wmi.c | 74 ++++++++++++-----------
  1 file changed, 39 insertions(+), 35 deletions(-)
drivers/platform/x86/dell/alienware-wmi.c +39 -35
index ed66720260ab..c5ad0f95c442 100644
@@ -545,6 +545,45 @@ static ssize_t zone_set(struct device *dev, struct device_attribute *attr,
  	return ret ? ret : count;
  }
 
+/*
+ * Lighting control state device attribute (Global)
+ */
+static ssize_t lighting_control_state_show(struct device *dev,
+					   struct device_attribute *attr,
+					   char *buf)
+{
+	if (lighting_control_state == LEGACY_BOOTING)
+		return sysfs_emit(buf, "[booting] running suspend\n");
+	else if (lighting_control_state == LEGACY_SUSPEND)
+		return sysfs_emit(buf, "booting running [suspend]\n");
+
+	return sysfs_emit(buf, "booting [running] suspend\n");
+}
+
+static ssize_t lighting_control_state_store(struct device *dev,
+					    struct device_attribute *attr,
+					    const char *buf, size_t count)
+{
+	u8 val;
+
+	if (strcmp(buf, "booting\n") == 0)
+		val = LEGACY_BOOTING;
+	else if (strcmp(buf, "suspend\n") == 0)
+		val = LEGACY_SUSPEND;
+	else if (interface == LEGACY)
+		val = LEGACY_RUNNING;
+	else
+		val = WMAX_RUNNING;
+
+	lighting_control_state = val;
+	pr_debug("alienware-wmi: updated control state to %d\n",
+		 lighting_control_state);
+
+	return count;
+}
+
+static DEVICE_ATTR_RW(lighting_control_state);
+
  /*
   * LED Brightness (Global)
   */
@@ -589,41 +628,6 @@ static struct led_classdev global_led = {
  	.name = "alienware::global_brightness",
  };
 
-/*
- * Lighting control state device attribute (Global)
- */
-static ssize_t show_control_state(struct device *dev,
-				  struct device_attribute *attr, char *buf)
-{
-	if (lighting_control_state == LEGACY_BOOTING)
-		return sysfs_emit(buf, "[booting] running suspend\n");
-	else if (lighting_control_state == LEGACY_SUSPEND)
-		return sysfs_emit(buf, "booting running [suspend]\n");
-	return sysfs_emit(buf, "booting [running] suspend\n");
-}
-
-static ssize_t store_control_state(struct device *dev,
-				   struct device_attribute *attr,
-				   const char *buf, size_t count)
-{
-	long unsigned int val;
-	if (strcmp(buf, "booting\n") == 0)
-		val = LEGACY_BOOTING;
-	else if (strcmp(buf, "suspend\n") == 0)
-		val = LEGACY_SUSPEND;
-	else if (interface == LEGACY)
-		val = LEGACY_RUNNING;
-	else
-		val = WMAX_RUNNING;
-	lighting_control_state = val;
-	pr_debug("alienware-wmi: updated control state to %d\n",
-		 lighting_control_state);
-	return count;
-}
-
-static DEVICE_ATTR(lighting_control_state, 0644, show_control_state,
-		   store_control_state);
-
  static int alienware_zone_init(struct platform_device *dev)
  {
  	u8 zone;
author maintainer
#6 lore raw

PATCH 3/20 alienware-wmi: Modify parse_rgb() signature

In reply to Kurt Borja

parse_rgb() now takes struct color_platform instead of struct platform_zone to support upcoming refactor.

---
 drivers/platform/x86/dell/alienware-wmi.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)
drivers/platform/x86/dell/alienware-wmi.c +3 -3
index c5ad0f95c442..273ce9b10765 100644
@@ -434,7 +434,7 @@ static u8 global_brightness;
 /*
  * Helpers used for zone control
  */
-static int parse_rgb(const char *buf, struct platform_zone *zone)
+static int parse_rgb(const char *buf, struct color_platform *colors)
 {
 	long unsigned int rgb;
 	int ret;
@@ -454,7 +454,7 @@ static int parse_rgb(const char *buf, struct platform_zone *zone)
 	repackager.package = rgb & 0x0f0f0f0f;
 	pr_debug("alienware-wmi: r: %d g:%d b: %d\n",
 		 repackager.cp.red, repackager.cp.green, repackager.cp.blue);
-	zone->colors = repackager.cp;
+	*colors = repackager.cp;
 	return 0;
 }
 
@@ -538,7 +538,7 @@ static ssize_t zone_set(struct device *dev, struct device_attribute *attr,
 		pr_err("alienware-wmi: invalid target zone\n");
 		return 1;
 	}
-	ret = parse_rgb(buf, target_zone);
+	ret = parse_rgb(buf, &target_zone->colors);
 	if (ret)
 		return ret;
 	ret = alienware_update_led(target_zone);
Signature · 1 line
2.47.1
Reviewed-by on v1 3/20
#7 lore raw

Re: [PATCH 03/20] alienware-wmi: Modify parse_rgb() signature

Am 21.12.24 um 06:59 schrieb Kurt Borja:

Quoted 2 lines

parse_rgb() now takes struct color_platform instead of struct platform_zone to support upcoming refactor.

Quoted 36 lines
---
  drivers/platform/x86/dell/alienware-wmi.c | 6 +++---
  1 file changed, 3 insertions(+), 3 deletions(-)
drivers/platform/x86/dell/alienware-wmi.c +3 -3
index c5ad0f95c442..273ce9b10765 100644
@@ -434,7 +434,7 @@ static u8 global_brightness;
  /*
   * Helpers used for zone control
   */
-static int parse_rgb(const char *buf, struct platform_zone *zone)
+static int parse_rgb(const char *buf, struct color_platform *colors)
  {
  	long unsigned int rgb;
  	int ret;
@@ -454,7 +454,7 @@ static int parse_rgb(const char *buf, struct platform_zone *zone)
  	repackager.package = rgb & 0x0f0f0f0f;
  	pr_debug("alienware-wmi: r: %d g:%d b: %d\n",
  		 repackager.cp.red, repackager.cp.green, repackager.cp.blue);
-	zone->colors = repackager.cp;
+	*colors = repackager.cp;
  	return 0;
  }
 
@@ -538,7 +538,7 @@ static ssize_t zone_set(struct device *dev, struct device_attribute *attr,
  		pr_err("alienware-wmi: invalid target zone\n");
  		return 1;
  	}
-	ret = parse_rgb(buf, target_zone);
+	ret = parse_rgb(buf, &target_zone->colors);
  	if (ret)
  		return ret;
  	ret = alienware_update_led(target_zone);
author maintainer
#8 lore raw

PATCH 4/20 alienware-wmi: Improve hdmi_mux, amplifier and deepslp group creation

In reply to Kurt Borja

Devices with hdmi_mux, amplifier or deepslp quirks create a sysfs group for each available feature. To accomplish this, helper create/remove functions were called on module init, but they had the following problems:

- Create helpers called remove helpers on failure, which in turn tried to remove the sysfs group that failed to be created
- If group creation failed mid way, previous successfully created groups were not cleaned up
- Module exit only removed hdmi_mux group

To improve this, drop all helpers and let the platform driver manage these sysfs groups, while controlling visibility with their respective quirks.

---
 drivers/platform/x86/dell/alienware-wmi.c | 114 ++++++++--------------
 1 file changed, 38 insertions(+), 76 deletions(-)
drivers/platform/x86/dell/alienware-wmi.c +38 -76
index 273ce9b10765..e010c94555e8 100644
@@ -417,12 +417,6 @@ static struct platform_zone *zone_data;
 static struct platform_profile_handler pp_handler;
 static enum wmax_thermal_mode supported_thermal_profiles[PLATFORM_PROFILE_LAST];
 
-static struct platform_driver platform_driver = {
-	.driver = {
-		.name = "alienware-wmi",
-	}
-};
-
 static struct attribute_group zone_attribute_group = {
 	.name = "rgb_zones",
 };
@@ -804,6 +798,12 @@ static DEVICE_ATTR(cable, S_IRUGO, show_hdmi_cable, NULL);
 static DEVICE_ATTR(source, S_IRUGO | S_IWUSR, show_hdmi_source,
 		   toggle_hdmi_source);
 
+static bool hdmi_group_visible(struct kobject *kobj)
+{
+	return quirks->hdmi_mux;
+}
+DEFINE_SIMPLE_SYSFS_GROUP_VISIBLE(hdmi);
+
 static struct attribute *hdmi_attrs[] = {
 	&dev_attr_cable.attr,
 	&dev_attr_source.attr,
@@ -812,25 +812,10 @@ static struct attribute *hdmi_attrs[] = {
 
 static const struct attribute_group hdmi_attribute_group = {
 	.name = "hdmi",
+	.is_visible = SYSFS_GROUP_VISIBLE(hdmi),
 	.attrs = hdmi_attrs,
 };
 
-static void remove_hdmi(struct platform_device *dev)
-{
-	if (quirks->hdmi_mux > 0)
-		sysfs_remove_group(&dev->dev.kobj, &hdmi_attribute_group);
-}
-
-static int create_hdmi(struct platform_device *dev)
-{
-	int ret;
-
-	ret = sysfs_create_group(&dev->dev.kobj, &hdmi_attribute_group);
-	if (ret)
-		remove_hdmi(dev);
-	return ret;
-}
-
 /*
  * Alienware GFX amplifier support
  * - Currently supports reading cable status
@@ -859,6 +844,12 @@ static ssize_t show_amplifier_status(struct device *dev,
 
 static DEVICE_ATTR(status, S_IRUGO, show_amplifier_status, NULL);
 
+static bool amplifier_group_visible(struct kobject *kobj)
+{
+	return quirks->amplifier;
+}
+DEFINE_SIMPLE_SYSFS_GROUP_VISIBLE(amplifier);
+
 static struct attribute *amplifier_attrs[] = {
 	&dev_attr_status.attr,
 	NULL,
@@ -866,25 +857,10 @@ static struct attribute *amplifier_attrs[] = {
 
 static const struct attribute_group amplifier_attribute_group = {
 	.name = "amplifier",
+	.is_visible = SYSFS_GROUP_VISIBLE(amplifier),
 	.attrs = amplifier_attrs,
 };
 
-static void remove_amplifier(struct platform_device *dev)
-{
-	if (quirks->amplifier > 0)
-		sysfs_remove_group(&dev->dev.kobj, &amplifier_attribute_group);
-}
-
-static int create_amplifier(struct platform_device *dev)
-{
-	int ret;
-
-	ret = sysfs_create_group(&dev->dev.kobj, &amplifier_attribute_group);
-	if (ret)
-		remove_amplifier(dev);
-	return ret;
-}
-
 /*
  * Deep Sleep Control support
  * - Modifies BIOS setting for deep sleep control allowing extra wakeup events
@@ -937,6 +913,12 @@ static ssize_t toggle_deepsleep(struct device *dev,
 
 static DEVICE_ATTR(deepsleep, S_IRUGO | S_IWUSR, show_deepsleep_status, toggle_deepsleep);
 
+static bool deepsleep_group_visible(struct kobject *kobj)
+{
+	return quirks->deepslp;
+}
+DEFINE_SIMPLE_SYSFS_GROUP_VISIBLE(deepsleep);
+
 static struct attribute *deepsleep_attrs[] = {
 	&dev_attr_deepsleep.attr,
 	NULL,
@@ -944,25 +926,10 @@ static struct attribute *deepsleep_attrs[] = {
 
 static const struct attribute_group deepsleep_attribute_group = {
 	.name = "deepsleep",
+	.is_visible = SYSFS_GROUP_VISIBLE(deepsleep),
 	.attrs = deepsleep_attrs,
 };
 
-static void remove_deepsleep(struct platform_device *dev)
-{
-	if (quirks->deepslp > 0)
-		sysfs_remove_group(&dev->dev.kobj, &deepsleep_attribute_group);
-}
-
-static int create_deepsleep(struct platform_device *dev)
-{
-	int ret;
-
-	ret = sysfs_create_group(&dev->dev.kobj, &deepsleep_attribute_group);
-	if (ret)
-		remove_deepsleep(dev);
-	return ret;
-}
-
 /*
  * Thermal Profile control
  *  - Provides thermal profile control through the Platform Profile API
@@ -1172,6 +1139,23 @@ static void remove_thermal_profile(void)
 		platform_profile_remove(&pp_handler);
 }
 
+/*
+ * Platform Driver
+ */
+static const struct attribute_group *alienfx_groups[] = {
+	&hdmi_attribute_group,
+	&amplifier_attribute_group,
+	&deepsleep_attribute_group,
+	NULL
+};
+
+static struct platform_driver platform_driver = {
+	.driver = {
+		.name = "alienware-wmi",
+		.dev_groups = alienfx_groups,
+	},
+};
+
 static int __init alienware_wmi_init(void)
 {
 	int ret;
@@ -1211,24 +1195,6 @@ static int __init alienware_wmi_init(void)
 	if (ret)
 		goto fail_platform_device2;
 
-	if (quirks->hdmi_mux > 0) {
-		ret = create_hdmi(platform_device);
-		if (ret)
-			goto fail_prep_hdmi;
-	}
-
-	if (quirks->amplifier > 0) {
-		ret = create_amplifier(platform_device);
-		if (ret)
-			goto fail_prep_amplifier;
-	}
-
-	if (quirks->deepslp > 0) {
-		ret = create_deepsleep(platform_device);
-		if (ret)
-			goto fail_prep_deepsleep;
-	}
-
 	if (quirks->thermal) {
 		ret = create_thermal_profile(platform_device);
 		if (ret)
@@ -1245,9 +1211,6 @@ static int __init alienware_wmi_init(void)
 	alienware_zone_exit(platform_device);
 	remove_thermal_profile();
 fail_prep_thermal_profile:
-fail_prep_deepsleep:
-fail_prep_amplifier:
-fail_prep_hdmi:
 	platform_device_del(platform_device);
 fail_platform_device2:
 	platform_device_put(platform_device);
@@ -1262,7 +1225,6 @@ module_init(alienware_wmi_init);
 static void __exit alienware_wmi_exit(void)
 {
 	alienware_zone_exit(platform_device);
-	remove_hdmi(platform_device);
 	remove_thermal_profile();
 	platform_device_unregister(platform_device);
 	platform_driver_unregister(&platform_driver);
Signature · 1 line
2.47.1
Reviewed-by on v1 4/20
#9 lore raw

Re: [PATCH 04/20] alienware-wmi: Improve hdmi_mux, amplifier and deepslp group creation

Am 21.12.24 um 06:59 schrieb Kurt Borja:

Quoted 5 lines

Devices with hdmi_mux, amplifier or deepslp quirks create a sysfs group for each available feature. To accomplish this, helper create/remove functions were called on module init, but they had the following problems:

Quoted 8 lines

- Create helpers called remove helpers on failure, which in turn tried to remove the sysfs group that failed to be created
- If group creation failed mid way, previous successfully created groups were not cleaned up
- Module exit only removed hdmi_mux group

To improve this, drop all helpers and let the platform driver manage these sysfs groups, while controlling visibility with their respective quirks.

Quoted 210 lines
---
  drivers/platform/x86/dell/alienware-wmi.c | 114 ++++++++--------------
  1 file changed, 38 insertions(+), 76 deletions(-)
drivers/platform/x86/dell/alienware-wmi.c +38 -76
index 273ce9b10765..e010c94555e8 100644
@@ -417,12 +417,6 @@ static struct platform_zone *zone_data;
  static struct platform_profile_handler pp_handler;
  static enum wmax_thermal_mode supported_thermal_profiles[PLATFORM_PROFILE_LAST];
 
-static struct platform_driver platform_driver = {
-	.driver = {
-		.name = "alienware-wmi",
-	}
-};
-
  static struct attribute_group zone_attribute_group = {
  	.name = "rgb_zones",
  };
@@ -804,6 +798,12 @@ static DEVICE_ATTR(cable, S_IRUGO, show_hdmi_cable, NULL);
  static DEVICE_ATTR(source, S_IRUGO | S_IWUSR, show_hdmi_source,
  		   toggle_hdmi_source);
 
+static bool hdmi_group_visible(struct kobject *kobj)
+{
+	return quirks->hdmi_mux;
+}
+DEFINE_SIMPLE_SYSFS_GROUP_VISIBLE(hdmi);
+
  static struct attribute *hdmi_attrs[] = {
  	&dev_attr_cable.attr,
  	&dev_attr_source.attr,
@@ -812,25 +812,10 @@ static struct attribute *hdmi_attrs[] = {
 
  static const struct attribute_group hdmi_attribute_group = {
  	.name = "hdmi",
+	.is_visible = SYSFS_GROUP_VISIBLE(hdmi),
  	.attrs = hdmi_attrs,
  };
 
-static void remove_hdmi(struct platform_device *dev)
-{
-	if (quirks->hdmi_mux > 0)
-		sysfs_remove_group(&dev->dev.kobj, &hdmi_attribute_group);
-}
-
-static int create_hdmi(struct platform_device *dev)
-{
-	int ret;
-
-	ret = sysfs_create_group(&dev->dev.kobj, &hdmi_attribute_group);
-	if (ret)
-		remove_hdmi(dev);
-	return ret;
-}
-
  /*
   * Alienware GFX amplifier support
   * - Currently supports reading cable status
@@ -859,6 +844,12 @@ static ssize_t show_amplifier_status(struct device *dev,
 
  static DEVICE_ATTR(status, S_IRUGO, show_amplifier_status, NULL);
 
+static bool amplifier_group_visible(struct kobject *kobj)
+{
+	return quirks->amplifier;
+}
+DEFINE_SIMPLE_SYSFS_GROUP_VISIBLE(amplifier);
+
  static struct attribute *amplifier_attrs[] = {
  	&dev_attr_status.attr,
  	NULL,
@@ -866,25 +857,10 @@ static struct attribute *amplifier_attrs[] = {
 
  static const struct attribute_group amplifier_attribute_group = {
  	.name = "amplifier",
+	.is_visible = SYSFS_GROUP_VISIBLE(amplifier),
  	.attrs = amplifier_attrs,
  };
 
-static void remove_amplifier(struct platform_device *dev)
-{
-	if (quirks->amplifier > 0)
-		sysfs_remove_group(&dev->dev.kobj, &amplifier_attribute_group);
-}
-
-static int create_amplifier(struct platform_device *dev)
-{
-	int ret;
-
-	ret = sysfs_create_group(&dev->dev.kobj, &amplifier_attribute_group);
-	if (ret)
-		remove_amplifier(dev);
-	return ret;
-}
-
  /*
   * Deep Sleep Control support
   * - Modifies BIOS setting for deep sleep control allowing extra wakeup events
@@ -937,6 +913,12 @@ static ssize_t toggle_deepsleep(struct device *dev,
 
  static DEVICE_ATTR(deepsleep, S_IRUGO | S_IWUSR, show_deepsleep_status, toggle_deepsleep);
 
+static bool deepsleep_group_visible(struct kobject *kobj)
+{
+	return quirks->deepslp;
+}
+DEFINE_SIMPLE_SYSFS_GROUP_VISIBLE(deepsleep);
+
  static struct attribute *deepsleep_attrs[] = {
  	&dev_attr_deepsleep.attr,
  	NULL,
@@ -944,25 +926,10 @@ static struct attribute *deepsleep_attrs[] = {
 
  static const struct attribute_group deepsleep_attribute_group = {
  	.name = "deepsleep",
+	.is_visible = SYSFS_GROUP_VISIBLE(deepsleep),
  	.attrs = deepsleep_attrs,
  };
 
-static void remove_deepsleep(struct platform_device *dev)
-{
-	if (quirks->deepslp > 0)
-		sysfs_remove_group(&dev->dev.kobj, &deepsleep_attribute_group);
-}
-
-static int create_deepsleep(struct platform_device *dev)
-{
-	int ret;
-
-	ret = sysfs_create_group(&dev->dev.kobj, &deepsleep_attribute_group);
-	if (ret)
-		remove_deepsleep(dev);
-	return ret;
-}
-
  /*
   * Thermal Profile control
   *  - Provides thermal profile control through the Platform Profile API
@@ -1172,6 +1139,23 @@ static void remove_thermal_profile(void)
  		platform_profile_remove(&pp_handler);
  }
 
+/*
+ * Platform Driver
+ */
+static const struct attribute_group *alienfx_groups[] = {
+	&hdmi_attribute_group,
+	&amplifier_attribute_group,
+	&deepsleep_attribute_group,
+	NULL
+};
+
+static struct platform_driver platform_driver = {
+	.driver = {
+		.name = "alienware-wmi",
+		.dev_groups = alienfx_groups,
+	},
+};
+
  static int __init alienware_wmi_init(void)
  {
  	int ret;
@@ -1211,24 +1195,6 @@ static int __init alienware_wmi_init(void)
  	if (ret)
  		goto fail_platform_device2;
 
-	if (quirks->hdmi_mux > 0) {
-		ret = create_hdmi(platform_device);
-		if (ret)
-			goto fail_prep_hdmi;
-	}
-
-	if (quirks->amplifier > 0) {
-		ret = create_amplifier(platform_device);
-		if (ret)
-			goto fail_prep_amplifier;
-	}
-
-	if (quirks->deepslp > 0) {
-		ret = create_deepsleep(platform_device);
-		if (ret)
-			goto fail_prep_deepsleep;
-	}
-
  	if (quirks->thermal) {
  		ret = create_thermal_profile(platform_device);
  		if (ret)
@@ -1245,9 +1211,6 @@ static int __init alienware_wmi_init(void)
  	alienware_zone_exit(platform_device);
  	remove_thermal_profile();
  fail_prep_thermal_profile:
-fail_prep_deepsleep:
-fail_prep_amplifier:
-fail_prep_hdmi:
  	platform_device_del(platform_device);
  fail_platform_device2:
  	platform_device_put(platform_device);
@@ -1262,7 +1225,6 @@ module_init(alienware_wmi_init);
  static void __exit alienware_wmi_exit(void)
  {
  	alienware_zone_exit(platform_device);
-	remove_hdmi(platform_device);
  	remove_thermal_profile();
  	platform_device_unregister(platform_device);
  	platform_driver_unregister(&platform_driver);
author maintainer
#10 lore raw

PATCH 5/20 alienware-wmi: Improve rgb-zones group creation

In reply to Kurt Borja

Define zone_attrs statically with the use of helper macros and initialize the zone_attribute_group with driver's .dev_groups.

Drop match_zone() and instead pass a location argument to previous show/store methods to access the correct zone LED state. On top of that rename zone_set() -> zone_store() to be more consistent with sysfs conventions.

---
 drivers/platform/x86/dell/alienware-wmi.c | 179 +++++++++-------------
 1 file changed, 72 insertions(+), 107 deletions(-)
drivers/platform/x86/dell/alienware-wmi.c +72 -107
index e010c94555e8..a431b1fec9fb 100644
@@ -376,12 +376,6 @@ struct color_platform {
 	u8 red;
 } __packed;
 
-struct platform_zone {
-	u8 location;
-	struct device_attribute *attr;
-	struct color_platform colors;
-};
-
 struct wmax_brightness_args {
 	u32 led_mask;
 	u32 percentage;
@@ -411,16 +405,10 @@ struct wmax_u32_args {
 };
 
 static struct platform_device *platform_device;
-static struct device_attribute *zone_dev_attrs;
-static struct attribute **zone_attrs;
-static struct platform_zone *zone_data;
+static struct color_platform colors[4];
 static struct platform_profile_handler pp_handler;
 static enum wmax_thermal_mode supported_thermal_profiles[PLATFORM_PROFILE_LAST];
 
-static struct attribute_group zone_attribute_group = {
-	.name = "rgb_zones",
-};
-
 static u8 interface;
 static u8 lighting_control_state;
 static u8 global_brightness;
@@ -452,24 +440,10 @@ static int parse_rgb(const char *buf, struct color_platform *colors)
 	return 0;
 }
 
-static struct platform_zone *match_zone(struct device_attribute *attr)
-{
-	u8 zone;
-
-	for (zone = 0; zone < quirks->num_zones; zone++) {
-		if ((struct device_attribute *)zone_data[zone].attr == attr) {
-			pr_debug("alienware-wmi: matched zone location: %d\n",
-				 zone_data[zone].location);
-			return &zone_data[zone];
-		}
-	}
-	return NULL;
-}
-
 /*
  * Individual RGB zone control
  */
-static int alienware_update_led(struct platform_zone *zone)
+static int alienware_update_led(u8 location)
 {
 	int method_id;
 	acpi_status status;
@@ -478,8 +452,8 @@ static int alienware_update_led(struct platform_zone *zone)
 	struct legacy_led_args legacy_args;
 	struct wmax_led_args wmax_basic_args;
 	if (interface == WMAX) {
-		wmax_basic_args.led_mask = 1 << zone->location;
-		wmax_basic_args.colors = zone->colors;
+		wmax_basic_args.led_mask = 1 << location;
+		wmax_basic_args.colors = colors[location];
 		wmax_basic_args.state = lighting_control_state;
 		guid = WMAX_CONTROL_GUID;
 		method_id = WMAX_METHOD_ZONE_CONTROL;
@@ -487,7 +461,7 @@ static int alienware_update_led(struct platform_zone *zone)
 		input.length = sizeof(wmax_basic_args);
 		input.pointer = &wmax_basic_args;
 	} else {
-		legacy_args.colors = zone->colors;
+		legacy_args.colors = colors[location];
 		legacy_args.brightness = global_brightness;
 		legacy_args.state = 0;
 		if (lighting_control_state == LEGACY_BOOTING ||
@@ -496,7 +470,7 @@ static int alienware_update_led(struct platform_zone *zone)
 			legacy_args.state = lighting_control_state;
 		} else
 			guid = LEGACY_CONTROL_GUID;
-		method_id = zone->location + 1;
+		method_id = location + 1;
 
 		input.length = sizeof(legacy_args);
 		input.pointer = &legacy_args;
@@ -510,35 +484,54 @@ static int alienware_update_led(struct platform_zone *zone)
 }
 
 static ssize_t zone_show(struct device *dev, struct device_attribute *attr,
-			 char *buf)
+			 char *buf, u8 location)
 {
-	struct platform_zone *target_zone;
-	target_zone = match_zone(attr);
-	if (target_zone == NULL)
-		return sprintf(buf, "red: -1, green: -1, blue: -1\n");
 	return sprintf(buf, "red: %d, green: %d, blue: %d\n",
-		       target_zone->colors.red,
-		       target_zone->colors.green, target_zone->colors.blue);
+		       colors[location].red, colors[location].green,
+		       colors[location].blue);
 
 }
 
-static ssize_t zone_set(struct device *dev, struct device_attribute *attr,
-			const char *buf, size_t count)
+static ssize_t zone_store(struct device *dev, struct device_attribute *attr,
+			  const char *buf, size_t count, u8 location)
 {
-	struct platform_zone *target_zone;
 	int ret;
-	target_zone = match_zone(attr);
-	if (target_zone == NULL) {
-		pr_err("alienware-wmi: invalid target zone\n");
-		return 1;
-	}
-	ret = parse_rgb(buf, &target_zone->colors);
+
+	ret = parse_rgb(buf, &colors[location]);
 	if (ret)
 		return ret;
-	ret = alienware_update_led(target_zone);
+
+	ret = alienware_update_led(location);
+
 	return ret ? ret : count;
 }
 
+#define ALIENWARE_ZONE_SHOW_FUNC(_num)					\
+	static ssize_t zone0##_num##_show(struct device *dev,		\
+					struct device_attribute *attr,	\
+					char *buf)			\
+	{								\
+		return zone_show(dev, attr, buf, _num);			\
+	}
+
+#define ALIENWARE_ZONE_STORE_FUNC(_num)					\
+	static ssize_t zone0##_num##_store(struct device *dev,		\
+					struct device_attribute *attr,	\
+					const char *buf, size_t count)	\
+	{								\
+		return zone_store(dev, attr, buf, count, _num);		\
+	}
+
+#define ALIENWARE_ZONE_ATTR(_num)					\
+	ALIENWARE_ZONE_SHOW_FUNC(_num)					\
+	ALIENWARE_ZONE_STORE_FUNC(_num)					\
+	static DEVICE_ATTR_RW(zone0##_num)
+
+ALIENWARE_ZONE_ATTR(0);
+ALIENWARE_ZONE_ATTR(1);
+ALIENWARE_ZONE_ATTR(2);
+ALIENWARE_ZONE_ATTR(3);
+
 /*
  * Lighting control state device attribute (Global)
  */
@@ -578,6 +571,33 @@ static ssize_t lighting_control_state_store(struct device *dev,
 
 static DEVICE_ATTR_RW(lighting_control_state);
 
+static umode_t zone_attr_visible(struct kobject *kobj,
+				 struct attribute *attr, int n)
+{
+	return n < quirks->num_zones + 1 ? 0644 : 0;
+}
+
+static bool zone_group_visible(struct kobject *kobj)
+{
+	return quirks->num_zones > 0;
+}
+DEFINE_SYSFS_GROUP_VISIBLE(zone);
+
+static struct attribute *zone_attrs[] = {
+	&dev_attr_lighting_control_state.attr,
+	&dev_attr_zone00.attr,
+	&dev_attr_zone01.attr,
+	&dev_attr_zone02.attr,
+	&dev_attr_zone03.attr,
+	NULL
+};
+
+static struct attribute_group zone_attribute_group = {
+	.name = "rgb_zones",
+	.is_visible = SYSFS_GROUP_VISIBLE(zone),
+	.attrs = zone_attrs,
+};
+
 /*
  * LED Brightness (Global)
  */
@@ -606,7 +626,7 @@ static void global_led_set(struct led_classdev *led_cdev,
 	if (interface == WMAX)
 		ret = wmax_brightness(brightness);
 	else
-		ret = alienware_update_led(&zone_data[0]);
+		ret = alienware_update_led(0);
 	if (ret)
 		pr_err("LED brightness update failed\n");
 }
@@ -624,9 +644,6 @@ static struct led_classdev global_led = {
 
 static int alienware_zone_init(struct platform_device *dev)
 {
-	u8 zone;
-	char *name;
-
 	if (interface == WMAX) {
 		lighting_control_state = WMAX_RUNNING;
 	} else if (interface == LEGACY) {
@@ -635,65 +652,12 @@ static int alienware_zone_init(struct platform_device *dev)
 	global_led.max_brightness = 0x0F;
 	global_brightness = global_led.max_brightness;
 
-	/*
-	 *      - zone_dev_attrs num_zones + 1 is for individual zones and then
-	 *        null terminated
-	 *      - zone_attrs num_zones + 2 is for all attrs in zone_dev_attrs +
-	 *        the lighting control + null terminated
-	 *      - zone_data num_zones is for the distinct zones
-	 */
-	zone_dev_attrs =
-	    kcalloc(quirks->num_zones + 1, sizeof(struct device_attribute),
-		    GFP_KERNEL);
-	if (!zone_dev_attrs)
-		return -ENOMEM;
-
-	zone_attrs =
-	    kcalloc(quirks->num_zones + 2, sizeof(struct attribute *),
-		    GFP_KERNEL);
-	if (!zone_attrs)
-		return -ENOMEM;
-
-	zone_data =
-	    kcalloc(quirks->num_zones, sizeof(struct platform_zone),
-		    GFP_KERNEL);
-	if (!zone_data)
-		return -ENOMEM;
-
-	for (zone = 0; zone < quirks->num_zones; zone++) {
-		name = kasprintf(GFP_KERNEL, "zone%02hhX", zone);
-		if (name == NULL)
-			return 1;
-		sysfs_attr_init(&zone_dev_attrs[zone].attr);
-		zone_dev_attrs[zone].attr.name = name;
-		zone_dev_attrs[zone].attr.mode = 0644;
-		zone_dev_attrs[zone].show = zone_show;
-		zone_dev_attrs[zone].store = zone_set;
-		zone_data[zone].location = zone;
-		zone_attrs[zone] = &zone_dev_attrs[zone].attr;
-		zone_data[zone].attr = &zone_dev_attrs[zone];
-	}
-	zone_attrs[quirks->num_zones] = &dev_attr_lighting_control_state.attr;
-	zone_attribute_group.attrs = zone_attrs;
-
-	led_classdev_register(&dev->dev, &global_led);
-
-	return sysfs_create_group(&dev->dev.kobj, &zone_attribute_group);
+	return led_classdev_register(&dev->dev, &global_led);
 }
 
 static void alienware_zone_exit(struct platform_device *dev)
 {
-	u8 zone;
-
-	sysfs_remove_group(&dev->dev.kobj, &zone_attribute_group);
 	led_classdev_unregister(&global_led);
-	if (zone_dev_attrs) {
-		for (zone = 0; zone < quirks->num_zones; zone++)
-			kfree(zone_dev_attrs[zone].attr.name);
-	}
-	kfree(zone_dev_attrs);
-	kfree(zone_data);
-	kfree(zone_attrs);
 }
 
 static acpi_status alienware_wmax_command(void *in_args, size_t in_size,
@@ -1143,6 +1107,7 @@ static void remove_thermal_profile(void)
  * Platform Driver
  */
 static const struct attribute_group *alienfx_groups[] = {
+	&zone_attribute_group,
 	&hdmi_attribute_group,
 	&amplifier_attribute_group,
 	&deepsleep_attribute_group,
Signature · 1 line
2.47.1
#11 lore raw

Re: [PATCH 05/20] alienware-wmi: Improve rgb-zones group creation

Am 21.12.24 um 06:59 schrieb Kurt Borja:

Quoted 161 lines

Define zone_attrs statically with the use of helper macros and initialize the zone_attribute_group with driver's .dev_groups.

Drop match_zone() and instead pass a location argument to previous show/store methods to access the correct zone LED state. On top of that rename zone_set() -> zone_store() to be more consistent with sysfs conventions.

---
  drivers/platform/x86/dell/alienware-wmi.c | 179 +++++++++-------------
  1 file changed, 72 insertions(+), 107 deletions(-)
drivers/platform/x86/dell/alienware-wmi.c +31 -49
index e010c94555e8..a431b1fec9fb 100644
@@ -376,12 +376,6 @@ struct color_platform {
  	u8 red;
  } __packed;
 
-struct platform_zone {
-	u8 location;
-	struct device_attribute *attr;
-	struct color_platform colors;
-};
-
  struct wmax_brightness_args {
  	u32 led_mask;
  	u32 percentage;
@@ -411,16 +405,10 @@ struct wmax_u32_args {
  };
 
  static struct platform_device *platform_device;
-static struct device_attribute *zone_dev_attrs;
-static struct attribute **zone_attrs;
-static struct platform_zone *zone_data;
+static struct color_platform colors[4];
  static struct platform_profile_handler pp_handler;
  static enum wmax_thermal_mode supported_thermal_profiles[PLATFORM_PROFILE_LAST];
 
-static struct attribute_group zone_attribute_group = {
-	.name = "rgb_zones",
-};
-
  static u8 interface;
  static u8 lighting_control_state;
  static u8 global_brightness;
@@ -452,24 +440,10 @@ static int parse_rgb(const char *buf, struct color_platform *colors)
  	return 0;
  }
 
-static struct platform_zone *match_zone(struct device_attribute *attr)
-{
-	u8 zone;
-
-	for (zone = 0; zone < quirks->num_zones; zone++) {
-		if ((struct device_attribute *)zone_data[zone].attr == attr) {
-			pr_debug("alienware-wmi: matched zone location: %d\n",
-				 zone_data[zone].location);
-			return &zone_data[zone];
-		}
-	}
-	return NULL;
-}
-
  /*
   * Individual RGB zone control
   */
-static int alienware_update_led(struct platform_zone *zone)
+static int alienware_update_led(u8 location)
  {
  	int method_id;
  	acpi_status status;
@@ -478,8 +452,8 @@ static int alienware_update_led(struct platform_zone *zone)
  	struct legacy_led_args legacy_args;
  	struct wmax_led_args wmax_basic_args;
  	if (interface == WMAX) {
-		wmax_basic_args.led_mask = 1 << zone->location;
-		wmax_basic_args.colors = zone->colors;
+		wmax_basic_args.led_mask = 1 << location;
+		wmax_basic_args.colors = colors[location];
  		wmax_basic_args.state = lighting_control_state;
  		guid = WMAX_CONTROL_GUID;
  		method_id = WMAX_METHOD_ZONE_CONTROL;
@@ -487,7 +461,7 @@ static int alienware_update_led(struct platform_zone *zone)
  		input.length = sizeof(wmax_basic_args);
  		input.pointer = &wmax_basic_args;
  	} else {
-		legacy_args.colors = zone->colors;
+		legacy_args.colors = colors[location];
  		legacy_args.brightness = global_brightness;
  		legacy_args.state = 0;
  		if (lighting_control_state == LEGACY_BOOTING ||
@@ -496,7 +470,7 @@ static int alienware_update_led(struct platform_zone *zone)
  			legacy_args.state = lighting_control_state;
  		} else
  			guid = LEGACY_CONTROL_GUID;
-		method_id = zone->location + 1;
+		method_id = location + 1;
 
  		input.length = sizeof(legacy_args);
  		input.pointer = &legacy_args;
@@ -510,35 +484,54 @@ static int alienware_update_led(struct platform_zone *zone)
  }
 
  static ssize_t zone_show(struct device *dev, struct device_attribute *attr,
-			 char *buf)
+			 char *buf, u8 location)
  {
-	struct platform_zone *target_zone;
-	target_zone = match_zone(attr);
-	if (target_zone == NULL)
-		return sprintf(buf, "red: -1, green: -1, blue: -1\n");
  	return sprintf(buf, "red: %d, green: %d, blue: %d\n",
-		       target_zone->colors.red,
-		       target_zone->colors.green, target_zone->colors.blue);
+		       colors[location].red, colors[location].green,
+		       colors[location].blue);
 
  }
 
-static ssize_t zone_set(struct device *dev, struct device_attribute *attr,
-			const char *buf, size_t count)
+static ssize_t zone_store(struct device *dev, struct device_attribute *attr,
+			  const char *buf, size_t count, u8 location)
  {
-	struct platform_zone *target_zone;
  	int ret;
-	target_zone = match_zone(attr);
-	if (target_zone == NULL) {
-		pr_err("alienware-wmi: invalid target zone\n");
-		return 1;
-	}
-	ret = parse_rgb(buf, &target_zone->colors);
+
+	ret = parse_rgb(buf, &colors[location]);
  	if (ret)
  		return ret;
-	ret = alienware_update_led(target_zone);
+
+	ret = alienware_update_led(location);
+
  	return ret ? ret : count;
  }
 
+#define ALIENWARE_ZONE_SHOW_FUNC(_num)					\
+	static ssize_t zone0##_num##_show(struct device *dev,		\
+					struct device_attribute *attr,	\
+					char *buf)			\
+	{								\
+		return zone_show(dev, attr, buf, _num);			\
+	}
+
+#define ALIENWARE_ZONE_STORE_FUNC(_num)					\
+	static ssize_t zone0##_num##_store(struct device *dev,		\
+					struct device_attribute *attr,	\
+					const char *buf, size_t count)	\
+	{								\
+		return zone_store(dev, attr, buf, count, _num);		\
+	}

drivers/platform/x86/dell/alienware-wmi.c static int alienware_update_led(struct platform_zone *zone) · line 533

Quoted 10 lines
drivers/platform/x86/dell/alienware-wmi.c +10 -0
+
+#define ALIENWARE_ZONE_ATTR(_num)					\
+	ALIENWARE_ZONE_SHOW_FUNC(_num)					\
+	ALIENWARE_ZONE_STORE_FUNC(_num)					\
+	static DEVICE_ATTR_RW(zone0##_num)
+
+ALIENWARE_ZONE_ATTR(0);
+ALIENWARE_ZONE_ATTR(1);
+ALIENWARE_ZONE_ATTR(2);
+ALIENWARE_ZONE_ATTR(3);

I know that this will result in a bit of boilerplate code, but please do not use such macros. They have a habit of confusing static code analysis tools.

drivers/platform/x86/dell/alienware-wmi.c static ssize_t lighting_control_state_store(struct device *dev, · line 577

Quoted 12 lines
drivers/platform/x86/dell/alienware-wmi.c +5 -0
+
  /*
   * Lighting control state device attribute (Global)
   */
@@ -578,6 +571,33 @@ static ssize_t lighting_control_state_store(struct device *dev,
 
  static DEVICE_ATTR_RW(lighting_control_state);
 
+static umode_t zone_attr_visible(struct kobject *kobj,
+				 struct attribute *attr, int n)
+{
+	return n < quirks->num_zones + 1 ? 0644 : 0;

Where is this function used?

Thanks,
Armin Wolf

Quoted 120 lines
drivers/platform/x86/dell/alienware-wmi.c +26 -58
+}
+
+static bool zone_group_visible(struct kobject *kobj)
+{
+	return quirks->num_zones > 0;
+}
+DEFINE_SYSFS_GROUP_VISIBLE(zone);
+
+static struct attribute *zone_attrs[] = {
+	&dev_attr_lighting_control_state.attr,
+	&dev_attr_zone00.attr,
+	&dev_attr_zone01.attr,
+	&dev_attr_zone02.attr,
+	&dev_attr_zone03.attr,
+	NULL
+};
+
+static struct attribute_group zone_attribute_group = {
+	.name = "rgb_zones",
+	.is_visible = SYSFS_GROUP_VISIBLE(zone),
+	.attrs = zone_attrs,
+};
+
  /*
   * LED Brightness (Global)
   */
@@ -606,7 +626,7 @@ static void global_led_set(struct led_classdev *led_cdev,
  	if (interface == WMAX)
  		ret = wmax_brightness(brightness);
  	else
-		ret = alienware_update_led(&zone_data[0]);
+		ret = alienware_update_led(0);
  	if (ret)
  		pr_err("LED brightness update failed\n");
  }
@@ -624,9 +644,6 @@ static struct led_classdev global_led = {
 
  static int alienware_zone_init(struct platform_device *dev)
  {
-	u8 zone;
-	char *name;
-
  	if (interface == WMAX) {
  		lighting_control_state = WMAX_RUNNING;
  	} else if (interface == LEGACY) {
@@ -635,65 +652,12 @@ static int alienware_zone_init(struct platform_device *dev)
  	global_led.max_brightness = 0x0F;
  	global_brightness = global_led.max_brightness;
 
-	/*
-	 *      - zone_dev_attrs num_zones + 1 is for individual zones and then
-	 *        null terminated
-	 *      - zone_attrs num_zones + 2 is for all attrs in zone_dev_attrs +
-	 *        the lighting control + null terminated
-	 *      - zone_data num_zones is for the distinct zones
-	 */
-	zone_dev_attrs =
-	    kcalloc(quirks->num_zones + 1, sizeof(struct device_attribute),
-		    GFP_KERNEL);
-	if (!zone_dev_attrs)
-		return -ENOMEM;
-
-	zone_attrs =
-	    kcalloc(quirks->num_zones + 2, sizeof(struct attribute *),
-		    GFP_KERNEL);
-	if (!zone_attrs)
-		return -ENOMEM;
-
-	zone_data =
-	    kcalloc(quirks->num_zones, sizeof(struct platform_zone),
-		    GFP_KERNEL);
-	if (!zone_data)
-		return -ENOMEM;
-
-	for (zone = 0; zone < quirks->num_zones; zone++) {
-		name = kasprintf(GFP_KERNEL, "zone%02hhX", zone);
-		if (name == NULL)
-			return 1;
-		sysfs_attr_init(&zone_dev_attrs[zone].attr);
-		zone_dev_attrs[zone].attr.name = name;
-		zone_dev_attrs[zone].attr.mode = 0644;
-		zone_dev_attrs[zone].show = zone_show;
-		zone_dev_attrs[zone].store = zone_set;
-		zone_data[zone].location = zone;
-		zone_attrs[zone] = &zone_dev_attrs[zone].attr;
-		zone_data[zone].attr = &zone_dev_attrs[zone];
-	}
-	zone_attrs[quirks->num_zones] = &dev_attr_lighting_control_state.attr;
-	zone_attribute_group.attrs = zone_attrs;
-
-	led_classdev_register(&dev->dev, &global_led);
-
-	return sysfs_create_group(&dev->dev.kobj, &zone_attribute_group);
+	return led_classdev_register(&dev->dev, &global_led);
  }
 
  static void alienware_zone_exit(struct platform_device *dev)
  {
-	u8 zone;
-
-	sysfs_remove_group(&dev->dev.kobj, &zone_attribute_group);
  	led_classdev_unregister(&global_led);
-	if (zone_dev_attrs) {
-		for (zone = 0; zone < quirks->num_zones; zone++)
-			kfree(zone_dev_attrs[zone].attr.name);
-	}
-	kfree(zone_dev_attrs);
-	kfree(zone_data);
-	kfree(zone_attrs);
  }
 
  static acpi_status alienware_wmax_command(void *in_args, size_t in_size,
@@ -1143,6 +1107,7 @@ static void remove_thermal_profile(void)
   * Platform Driver
   */
  static const struct attribute_group *alienfx_groups[] = {
+	&zone_attribute_group,
  	&hdmi_attribute_group,
  	&amplifier_attribute_group,
  	&deepsleep_attribute_group,
author maintainer
#12 lore raw

Re: [PATCH 05/20] alienware-wmi: Improve rgb-zones group creation

Quoted 168 lines · Armin Wolf

Am 21.12.24 um 06:59 schrieb Kurt Borja:

Quoted 166 lines

Define zone_attrs statically with the use of helper macros and initialize the zone_attribute_group with driver's .dev_groups.

Drop match_zone() and instead pass a location argument to previous show/store methods to access the correct zone LED state. On top of that rename zone_set() -> zone_store() to be more consistent with sysfs conventions.

---
  drivers/platform/x86/dell/alienware-wmi.c | 179 +++++++++-------------
  1 file changed, 72 insertions(+), 107 deletions(-)
drivers/platform/x86/dell/alienware-wmi.c +36 -49
index e010c94555e8..a431b1fec9fb 100644
@@ -376,12 +376,6 @@ struct color_platform {
  	u8 red;
  } __packed;
 
-struct platform_zone {
-	u8 location;
-	struct device_attribute *attr;
-	struct color_platform colors;
-};
-
  struct wmax_brightness_args {
  	u32 led_mask;
  	u32 percentage;
@@ -411,16 +405,10 @@ struct wmax_u32_args {
  };
 
  static struct platform_device *platform_device;
-static struct device_attribute *zone_dev_attrs;
-static struct attribute **zone_attrs;
-static struct platform_zone *zone_data;
+static struct color_platform colors[4];
  static struct platform_profile_handler pp_handler;
  static enum wmax_thermal_mode supported_thermal_profiles[PLATFORM_PROFILE_LAST];
 
-static struct attribute_group zone_attribute_group = {
-	.name = "rgb_zones",
-};
-
  static u8 interface;
  static u8 lighting_control_state;
  static u8 global_brightness;
@@ -452,24 +440,10 @@ static int parse_rgb(const char *buf, struct color_platform *colors)
  	return 0;
  }
 
-static struct platform_zone *match_zone(struct device_attribute *attr)
-{
-	u8 zone;
-
-	for (zone = 0; zone < quirks->num_zones; zone++) {
-		if ((struct device_attribute *)zone_data[zone].attr == attr) {
-			pr_debug("alienware-wmi: matched zone location: %d\n",
-				 zone_data[zone].location);
-			return &zone_data[zone];
-		}
-	}
-	return NULL;
-}
-
  /*
   * Individual RGB zone control
   */
-static int alienware_update_led(struct platform_zone *zone)
+static int alienware_update_led(u8 location)
  {
  	int method_id;
  	acpi_status status;
@@ -478,8 +452,8 @@ static int alienware_update_led(struct platform_zone *zone)
  	struct legacy_led_args legacy_args;
  	struct wmax_led_args wmax_basic_args;
  	if (interface == WMAX) {
-		wmax_basic_args.led_mask = 1 << zone->location;
-		wmax_basic_args.colors = zone->colors;
+		wmax_basic_args.led_mask = 1 << location;
+		wmax_basic_args.colors = colors[location];
  		wmax_basic_args.state = lighting_control_state;
  		guid = WMAX_CONTROL_GUID;
  		method_id = WMAX_METHOD_ZONE_CONTROL;
@@ -487,7 +461,7 @@ static int alienware_update_led(struct platform_zone *zone)
  		input.length = sizeof(wmax_basic_args);
  		input.pointer = &wmax_basic_args;
  	} else {
-		legacy_args.colors = zone->colors;
+		legacy_args.colors = colors[location];
  		legacy_args.brightness = global_brightness;
  		legacy_args.state = 0;
  		if (lighting_control_state == LEGACY_BOOTING ||
@@ -496,7 +470,7 @@ static int alienware_update_led(struct platform_zone *zone)
  			legacy_args.state = lighting_control_state;
  		} else
  			guid = LEGACY_CONTROL_GUID;
-		method_id = zone->location + 1;
+		method_id = location + 1;
 
  		input.length = sizeof(legacy_args);
  		input.pointer = &legacy_args;
@@ -510,35 +484,54 @@ static int alienware_update_led(struct platform_zone *zone)
  }
 
  static ssize_t zone_show(struct device *dev, struct device_attribute *attr,
-			 char *buf)
+			 char *buf, u8 location)
  {
-	struct platform_zone *target_zone;
-	target_zone = match_zone(attr);
-	if (target_zone == NULL)
-		return sprintf(buf, "red: -1, green: -1, blue: -1\n");
  	return sprintf(buf, "red: %d, green: %d, blue: %d\n",
-		       target_zone->colors.red,
-		       target_zone->colors.green, target_zone->colors.blue);
+		       colors[location].red, colors[location].green,
+		       colors[location].blue);
 
  }
 
-static ssize_t zone_set(struct device *dev, struct device_attribute *attr,
-			const char *buf, size_t count)
+static ssize_t zone_store(struct device *dev, struct device_attribute *attr,
+			  const char *buf, size_t count, u8 location)
  {
-	struct platform_zone *target_zone;
  	int ret;
-	target_zone = match_zone(attr);
-	if (target_zone == NULL) {
-		pr_err("alienware-wmi: invalid target zone\n");
-		return 1;
-	}
-	ret = parse_rgb(buf, &target_zone->colors);
+
+	ret = parse_rgb(buf, &colors[location]);
  	if (ret)
  		return ret;
-	ret = alienware_update_led(target_zone);
+
+	ret = alienware_update_led(location);
+
  	return ret ? ret : count;
  }
 
+#define ALIENWARE_ZONE_SHOW_FUNC(_num)					\
+	static ssize_t zone0##_num##_show(struct device *dev,		\
+					struct device_attribute *attr,	\
+					char *buf)			\
+	{								\
+		return zone_show(dev, attr, buf, _num);			\
+	}
+
+#define ALIENWARE_ZONE_STORE_FUNC(_num)					\
+	static ssize_t zone0##_num##_store(struct device *dev,		\
+					struct device_attribute *attr,	\
+					const char *buf, size_t count)	\
+	{								\
+		return zone_store(dev, attr, buf, count, _num);		\
+	}
+
+#define ALIENWARE_ZONE_ATTR(_num)					\
+	ALIENWARE_ZONE_SHOW_FUNC(_num)					\
+	ALIENWARE_ZONE_STORE_FUNC(_num)					\
+	static DEVICE_ATTR_RW(zone0##_num)
Quoted 8 lines

drivers/platform/x86/dell/alienware-wmi.c static int alienware_update_led(struct platform_zone *zone) · line 533

Quoted 5 lines
drivers/platform/x86/dell/alienware-wmi.c +5 -0
+
+ALIENWARE_ZONE_ATTR(0);
+ALIENWARE_ZONE_ATTR(1);
+ALIENWARE_ZONE_ATTR(2);
+ALIENWARE_ZONE_ATTR(3);

I know that this will result in a bit of boilerplate code, but please do not use such macros. They have a habit of confusing static code analysis tools.

Ack.

I'll drop this macros, checkpatch also hates the last one.

Quoted 7 lines
Quoted 7 lines
drivers/platform/x86/dell/alienware-wmi.c +1 -0
+
  /*
   * Lighting control state device attribute (Global)
   */
@@ -578,6 +571,33 @@ static ssize_t lighting_control_state_store(struct device *dev,
 
Quoted 8 lines

drivers/platform/x86/dell/alienware-wmi.c static ssize_t lighting_control_state_store(struct device *dev, · line 577

Quoted 6 lines
drivers/platform/x86/dell/alienware-wmi.c +4 -0
  static DEVICE_ATTR_RW(lighting_control_state);
 
+static umode_t zone_attr_visible(struct kobject *kobj,
+				 struct attribute *attr, int n)
+{
+	return n < quirks->num_zones + 1 ? 0644 : 0;

Where is this function used?

It gets picked up by DEFINE_SYSFS_GROUP_VISIBLE to manage individual attributes permissions.

Quoted 124 lines

Thanks,
Armin Wolf

Quoted 120 lines
drivers/platform/x86/dell/alienware-wmi.c +26 -58
+}
+
+static bool zone_group_visible(struct kobject *kobj)
+{
+	return quirks->num_zones > 0;
+}
+DEFINE_SYSFS_GROUP_VISIBLE(zone);
+
+static struct attribute *zone_attrs[] = {
+	&dev_attr_lighting_control_state.attr,
+	&dev_attr_zone00.attr,
+	&dev_attr_zone01.attr,
+	&dev_attr_zone02.attr,
+	&dev_attr_zone03.attr,
+	NULL
+};
+
+static struct attribute_group zone_attribute_group = {
+	.name = "rgb_zones",
+	.is_visible = SYSFS_GROUP_VISIBLE(zone),
+	.attrs = zone_attrs,
+};
+
  /*
   * LED Brightness (Global)
   */
@@ -606,7 +626,7 @@ static void global_led_set(struct led_classdev *led_cdev,
  	if (interface == WMAX)
  		ret = wmax_brightness(brightness);
  	else
-		ret = alienware_update_led(&zone_data[0]);
+		ret = alienware_update_led(0);
  	if (ret)
  		pr_err("LED brightness update failed\n");
  }
@@ -624,9 +644,6 @@ static struct led_classdev global_led = {
 
  static int alienware_zone_init(struct platform_device *dev)
  {
-	u8 zone;
-	char *name;
-
  	if (interface == WMAX) {
  		lighting_control_state = WMAX_RUNNING;
  	} else if (interface == LEGACY) {
@@ -635,65 +652,12 @@ static int alienware_zone_init(struct platform_device *dev)
  	global_led.max_brightness = 0x0F;
  	global_brightness = global_led.max_brightness;
 
-	/*
-	 *      - zone_dev_attrs num_zones + 1 is for individual zones and then
-	 *        null terminated
-	 *      - zone_attrs num_zones + 2 is for all attrs in zone_dev_attrs +
-	 *        the lighting control + null terminated
-	 *      - zone_data num_zones is for the distinct zones
-	 */
-	zone_dev_attrs =
-	    kcalloc(quirks->num_zones + 1, sizeof(struct device_attribute),
-		    GFP_KERNEL);
-	if (!zone_dev_attrs)
-		return -ENOMEM;
-
-	zone_attrs =
-	    kcalloc(quirks->num_zones + 2, sizeof(struct attribute *),
-		    GFP_KERNEL);
-	if (!zone_attrs)
-		return -ENOMEM;
-
-	zone_data =
-	    kcalloc(quirks->num_zones, sizeof(struct platform_zone),
-		    GFP_KERNEL);
-	if (!zone_data)
-		return -ENOMEM;
-
-	for (zone = 0; zone < quirks->num_zones; zone++) {
-		name = kasprintf(GFP_KERNEL, "zone%02hhX", zone);
-		if (name == NULL)
-			return 1;
-		sysfs_attr_init(&zone_dev_attrs[zone].attr);
-		zone_dev_attrs[zone].attr.name = name;
-		zone_dev_attrs[zone].attr.mode = 0644;
-		zone_dev_attrs[zone].show = zone_show;
-		zone_dev_attrs[zone].store = zone_set;
-		zone_data[zone].location = zone;
-		zone_attrs[zone] = &zone_dev_attrs[zone].attr;
-		zone_data[zone].attr = &zone_dev_attrs[zone];
-	}
-	zone_attrs[quirks->num_zones] = &dev_attr_lighting_control_state.attr;
-	zone_attribute_group.attrs = zone_attrs;
-
-	led_classdev_register(&dev->dev, &global_led);
-
-	return sysfs_create_group(&dev->dev.kobj, &zone_attribute_group);
+	return led_classdev_register(&dev->dev, &global_led);
  }
 
  static void alienware_zone_exit(struct platform_device *dev)
  {
-	u8 zone;
-
-	sysfs_remove_group(&dev->dev.kobj, &zone_attribute_group);
  	led_classdev_unregister(&global_led);
-	if (zone_dev_attrs) {
-		for (zone = 0; zone < quirks->num_zones; zone++)
-			kfree(zone_dev_attrs[zone].attr.name);
-	}
-	kfree(zone_dev_attrs);
-	kfree(zone_data);
-	kfree(zone_attrs);
  }
 
  static acpi_status alienware_wmax_command(void *in_args, size_t in_size,
@@ -1143,6 +1107,7 @@ static void remove_thermal_profile(void)
   * Platform Driver
   */
  static const struct attribute_group *alienfx_groups[] = {
+	&zone_attribute_group,
  	&hdmi_attribute_group,
  	&amplifier_attribute_group,
  	&deepsleep_attribute_group,
#13 lore raw

Re: [PATCH 05/20] alienware-wmi: Improve rgb-zones group creation

Am 27.12.24 um 05:37 schrieb Kurt Borja:

Quoted 188 lines · Armin Wolf
Quoted 167 lines

Am 21.12.24 um 06:59 schrieb Kurt Borja:

Quoted 165 lines

Define zone_attrs statically with the use of helper macros and initialize the zone_attribute_group with driver's .dev_groups.

Drop match_zone() and instead pass a location argument to previous show/store methods to access the correct zone LED state. On top of that rename zone_set() -> zone_store() to be more consistent with sysfs conventions.

---
   drivers/platform/x86/dell/alienware-wmi.c | 179 +++++++++-------------
   1 file changed, 72 insertions(+), 107 deletions(-)
drivers/platform/x86/dell/alienware-wmi.c +35 -49
index e010c94555e8..a431b1fec9fb 100644
@@ -376,12 +376,6 @@ struct color_platform {
   	u8 red;
   } __packed;
 
-struct platform_zone {
-	u8 location;
-	struct device_attribute *attr;
-	struct color_platform colors;
-};
-
   struct wmax_brightness_args {
   	u32 led_mask;
   	u32 percentage;
@@ -411,16 +405,10 @@ struct wmax_u32_args {
   };
 
   static struct platform_device *platform_device;
-static struct device_attribute *zone_dev_attrs;
-static struct attribute **zone_attrs;
-static struct platform_zone *zone_data;
+static struct color_platform colors[4];
   static struct platform_profile_handler pp_handler;
   static enum wmax_thermal_mode supported_thermal_profiles[PLATFORM_PROFILE_LAST];
 
-static struct attribute_group zone_attribute_group = {
-	.name = "rgb_zones",
-};
-
   static u8 interface;
   static u8 lighting_control_state;
   static u8 global_brightness;
@@ -452,24 +440,10 @@ static int parse_rgb(const char *buf, struct color_platform *colors)
   	return 0;
   }
 
-static struct platform_zone *match_zone(struct device_attribute *attr)
-{
-	u8 zone;
-
-	for (zone = 0; zone < quirks->num_zones; zone++) {
-		if ((struct device_attribute *)zone_data[zone].attr == attr) {
-			pr_debug("alienware-wmi: matched zone location: %d\n",
-				 zone_data[zone].location);
-			return &zone_data[zone];
-		}
-	}
-	return NULL;
-}
-
   /*
    * Individual RGB zone control
    */
-static int alienware_update_led(struct platform_zone *zone)
+static int alienware_update_led(u8 location)
   {
   	int method_id;
   	acpi_status status;
@@ -478,8 +452,8 @@ static int alienware_update_led(struct platform_zone *zone)
   	struct legacy_led_args legacy_args;
   	struct wmax_led_args wmax_basic_args;
   	if (interface == WMAX) {
-		wmax_basic_args.led_mask = 1 << zone->location;
-		wmax_basic_args.colors = zone->colors;
+		wmax_basic_args.led_mask = 1 << location;
+		wmax_basic_args.colors = colors[location];
   		wmax_basic_args.state = lighting_control_state;
   		guid = WMAX_CONTROL_GUID;
   		method_id = WMAX_METHOD_ZONE_CONTROL;
@@ -487,7 +461,7 @@ static int alienware_update_led(struct platform_zone *zone)
   		input.length = sizeof(wmax_basic_args);
   		input.pointer = &wmax_basic_args;
   	} else {
-		legacy_args.colors = zone->colors;
+		legacy_args.colors = colors[location];
   		legacy_args.brightness = global_brightness;
   		legacy_args.state = 0;
   		if (lighting_control_state == LEGACY_BOOTING ||
@@ -496,7 +470,7 @@ static int alienware_update_led(struct platform_zone *zone)
   			legacy_args.state = lighting_control_state;
   		} else
   			guid = LEGACY_CONTROL_GUID;
-		method_id = zone->location + 1;
+		method_id = location + 1;
 
   		input.length = sizeof(legacy_args);
   		input.pointer = &legacy_args;
@@ -510,35 +484,54 @@ static int alienware_update_led(struct platform_zone *zone)
   }
 
   static ssize_t zone_show(struct device *dev, struct device_attribute *attr,
-			 char *buf)
+			 char *buf, u8 location)
   {
-	struct platform_zone *target_zone;
-	target_zone = match_zone(attr);
-	if (target_zone == NULL)
-		return sprintf(buf, "red: -1, green: -1, blue: -1\n");
   	return sprintf(buf, "red: %d, green: %d, blue: %d\n",
-		       target_zone->colors.red,
-		       target_zone->colors.green, target_zone->colors.blue);
+		       colors[location].red, colors[location].green,
+		       colors[location].blue);
 
   }
 
-static ssize_t zone_set(struct device *dev, struct device_attribute *attr,
-			const char *buf, size_t count)
+static ssize_t zone_store(struct device *dev, struct device_attribute *attr,
+			  const char *buf, size_t count, u8 location)
   {
-	struct platform_zone *target_zone;
   	int ret;
-	target_zone = match_zone(attr);
-	if (target_zone == NULL) {
-		pr_err("alienware-wmi: invalid target zone\n");
-		return 1;
-	}
-	ret = parse_rgb(buf, &target_zone->colors);
+
+	ret = parse_rgb(buf, &colors[location]);
   	if (ret)
   		return ret;
-	ret = alienware_update_led(target_zone);
+
+	ret = alienware_update_led(location);
+
   	return ret ? ret : count;
   }
 
+#define ALIENWARE_ZONE_SHOW_FUNC(_num)					\
+	static ssize_t zone0##_num##_show(struct device *dev,		\
+					struct device_attribute *attr,	\
+					char *buf)			\
+	{								\
+		return zone_show(dev, attr, buf, _num);			\
+	}
+
+#define ALIENWARE_ZONE_STORE_FUNC(_num)					\
+	static ssize_t zone0##_num##_store(struct device *dev,		\
+					struct device_attribute *attr,	\
+					const char *buf, size_t count)	\
+	{								\
+		return zone_store(dev, attr, buf, count, _num);		\
+	}
+
+#define ALIENWARE_ZONE_ATTR(_num)					\
+	ALIENWARE_ZONE_SHOW_FUNC(_num)					\
+	ALIENWARE_ZONE_STORE_FUNC(_num)					\
Quoted 8 lines

drivers/platform/x86/dell/alienware-wmi.c static int alienware_update_led(struct platform_zone *zone) · line 533

Quoted 6 lines
drivers/platform/x86/dell/alienware-wmi.c +6 -0
+	static DEVICE_ATTR_RW(zone0##_num)
+
+ALIENWARE_ZONE_ATTR(0);
+ALIENWARE_ZONE_ATTR(1);
+ALIENWARE_ZONE_ATTR(2);
+ALIENWARE_ZONE_ATTR(3);

I know that this will result in a bit of boilerplate code, but please do not use such macros. They have a habit of confusing static code analysis tools.

Ack.

I'll drop this macros, checkpatch also hates the last one.

Quoted 8 lines
Quoted 8 lines
drivers/platform/x86/dell/alienware-wmi.c +1 -0
+
   /*
    * Lighting control state device attribute (Global)
    */
@@ -578,6 +571,33 @@ static ssize_t lighting_control_state_store(struct device *dev,
 
   static DEVICE_ATTR_RW(lighting_control_state);
 
Quoted 7 lines
Quoted 5 lines

drivers/platform/x86/dell/alienware-wmi.c static ssize_t lighting_control_state_store(struct device *dev, · line 577

Quoted 4 lines
drivers/platform/x86/dell/alienware-wmi.c +4 -0
+static umode_t zone_attr_visible(struct kobject *kobj,
+				 struct attribute *attr, int n)
+{
+	return n < quirks->num_zones + 1 ? 0644 : 0;

Where is this function used?

It gets picked up by DEFINE_SYSFS_GROUP_VISIBLE to manage individual attributes permissions.

I see, nice.

Thanks,
Armin Wolf

Quoted 123 lines
Quoted 123 lines

Thanks,
Armin Wolf

Quoted 120 lines
drivers/platform/x86/dell/alienware-wmi.c +26 -58
+}
+
+static bool zone_group_visible(struct kobject *kobj)
+{
+	return quirks->num_zones > 0;
+}
+DEFINE_SYSFS_GROUP_VISIBLE(zone);
+
+static struct attribute *zone_attrs[] = {
+	&dev_attr_lighting_control_state.attr,
+	&dev_attr_zone00.attr,
+	&dev_attr_zone01.attr,
+	&dev_attr_zone02.attr,
+	&dev_attr_zone03.attr,
+	NULL
+};
+
+static struct attribute_group zone_attribute_group = {
+	.name = "rgb_zones",
+	.is_visible = SYSFS_GROUP_VISIBLE(zone),
+	.attrs = zone_attrs,
+};
+
   /*
    * LED Brightness (Global)
    */
@@ -606,7 +626,7 @@ static void global_led_set(struct led_classdev *led_cdev,
   	if (interface == WMAX)
   		ret = wmax_brightness(brightness);
   	else
-		ret = alienware_update_led(&zone_data[0]);
+		ret = alienware_update_led(0);
   	if (ret)
   		pr_err("LED brightness update failed\n");
   }
@@ -624,9 +644,6 @@ static struct led_classdev global_led = {
 
   static int alienware_zone_init(struct platform_device *dev)
   {
-	u8 zone;
-	char *name;
-
   	if (interface == WMAX) {
   		lighting_control_state = WMAX_RUNNING;
   	} else if (interface == LEGACY) {
@@ -635,65 +652,12 @@ static int alienware_zone_init(struct platform_device *dev)
   	global_led.max_brightness = 0x0F;
   	global_brightness = global_led.max_brightness;
 
-	/*
-	 *      - zone_dev_attrs num_zones + 1 is for individual zones and then
-	 *        null terminated
-	 *      - zone_attrs num_zones + 2 is for all attrs in zone_dev_attrs +
-	 *        the lighting control + null terminated
-	 *      - zone_data num_zones is for the distinct zones
-	 */
-	zone_dev_attrs =
-	    kcalloc(quirks->num_zones + 1, sizeof(struct device_attribute),
-		    GFP_KERNEL);
-	if (!zone_dev_attrs)
-		return -ENOMEM;
-
-	zone_attrs =
-	    kcalloc(quirks->num_zones + 2, sizeof(struct attribute *),
-		    GFP_KERNEL);
-	if (!zone_attrs)
-		return -ENOMEM;
-
-	zone_data =
-	    kcalloc(quirks->num_zones, sizeof(struct platform_zone),
-		    GFP_KERNEL);
-	if (!zone_data)
-		return -ENOMEM;
-
-	for (zone = 0; zone < quirks->num_zones; zone++) {
-		name = kasprintf(GFP_KERNEL, "zone%02hhX", zone);
-		if (name == NULL)
-			return 1;
-		sysfs_attr_init(&zone_dev_attrs[zone].attr);
-		zone_dev_attrs[zone].attr.name = name;
-		zone_dev_attrs[zone].attr.mode = 0644;
-		zone_dev_attrs[zone].show = zone_show;
-		zone_dev_attrs[zone].store = zone_set;
-		zone_data[zone].location = zone;
-		zone_attrs[zone] = &zone_dev_attrs[zone].attr;
-		zone_data[zone].attr = &zone_dev_attrs[zone];
-	}
-	zone_attrs[quirks->num_zones] = &dev_attr_lighting_control_state.attr;
-	zone_attribute_group.attrs = zone_attrs;
-
-	led_classdev_register(&dev->dev, &global_led);
-
-	return sysfs_create_group(&dev->dev.kobj, &zone_attribute_group);
+	return led_classdev_register(&dev->dev, &global_led);
   }
 
   static void alienware_zone_exit(struct platform_device *dev)
   {
-	u8 zone;
-
-	sysfs_remove_group(&dev->dev.kobj, &zone_attribute_group);
   	led_classdev_unregister(&global_led);
-	if (zone_dev_attrs) {
-		for (zone = 0; zone < quirks->num_zones; zone++)
-			kfree(zone_dev_attrs[zone].attr.name);
-	}
-	kfree(zone_dev_attrs);
-	kfree(zone_data);
-	kfree(zone_attrs);
   }
 
   static acpi_status alienware_wmax_command(void *in_args, size_t in_size,
@@ -1143,6 +1107,7 @@ static void remove_thermal_profile(void)
    * Platform Driver
    */
   static const struct attribute_group *alienfx_groups[] = {
+	&zone_attribute_group,
   	&hdmi_attribute_group,
   	&amplifier_attribute_group,
   	&deepsleep_attribute_group,
author maintainer
#14 lore raw

PATCH 6/20 alienware_wmi: Clean variable declaration in thermal methods

In reply to Kurt Borja

Reorder variable declaration from longest to shortest.

---
 drivers/platform/x86/dell/alienware-wmi.c | 12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)
drivers/platform/x86/dell/alienware-wmi.c +6 -6
index a431b1fec9fb..67cf376df0f5 100644
@@ -923,13 +923,13 @@ static bool is_wmax_thermal_code(u32 code)
 
 static int wmax_thermal_information(u8 operation, u8 arg, u32 *out_data)
 {
-	acpi_status status;
 	struct wmax_u32_args in_args = {
 		.operation = operation,
 		.arg1 = arg,
 		.arg2 = 0,
 		.arg3 = 0,
 	};
+	acpi_status status;
 
 	status = alienware_wmax_command(&in_args, sizeof(in_args),
 					WMAX_METHOD_THERMAL_INFORMATION,
@@ -946,13 +946,13 @@ static int wmax_thermal_information(u8 operation, u8 arg, u32 *out_data)
 
 static int wmax_thermal_control(u8 profile)
 {
-	acpi_status status;
 	struct wmax_u32_args in_args = {
 		.operation = WMAX_OPERATION_ACTIVATE_PROFILE,
 		.arg1 = profile,
 		.arg2 = 0,
 		.arg3 = 0,
 	};
+	acpi_status status;
 	u32 out_data;
 
 	status = alienware_wmax_command(&in_args, sizeof(in_args),
@@ -970,13 +970,13 @@ static int wmax_thermal_control(u8 profile)
 
 static int wmax_game_shift_status(u8 operation, u32 *out_data)
 {
-	acpi_status status;
 	struct wmax_u32_args in_args = {
 		.operation = operation,
 		.arg1 = 0,
 		.arg2 = 0,
 		.arg3 = 0,
 	};
+	acpi_status status;
 
 	status = alienware_wmax_command(&in_args, sizeof(in_args),
 					WMAX_METHOD_GAME_SHIFT_STATUS,
@@ -1045,11 +1045,11 @@ static int thermal_profile_set(struct platform_profile_handler *pprof,
 
 static int create_thermal_profile(struct platform_device *platform_device)
 {
-	u32 out_data;
+	enum platform_profile_option profile;
+	enum wmax_thermal_mode mode;
 	u8 sys_desc[4];
 	u32 first_mode;
-	enum wmax_thermal_mode mode;
-	enum platform_profile_option profile;
+	u32 out_data;
 	int ret;
 
 	ret = wmax_thermal_information(WMAX_OPERATION_SYS_DESCRIPTION,
Signature · 1 line
2.47.1
Reviewed-by on v1 6/20
#15 lore raw

Re: [PATCH 06/20] alienware_wmi: Clean variable declaration in thermal methods

Am 21.12.24 um 06:59 schrieb Kurt Borja:

Quoted 1 line

Reorder variable declaration from longest to shortest.

Quoted 70 lines
---
  drivers/platform/x86/dell/alienware-wmi.c | 12 ++++++------
  1 file changed, 6 insertions(+), 6 deletions(-)
drivers/platform/x86/dell/alienware-wmi.c +6 -6
index a431b1fec9fb..67cf376df0f5 100644
@@ -923,13 +923,13 @@ static bool is_wmax_thermal_code(u32 code)
 
  static int wmax_thermal_information(u8 operation, u8 arg, u32 *out_data)
  {
-	acpi_status status;
  	struct wmax_u32_args in_args = {
  		.operation = operation,
  		.arg1 = arg,
  		.arg2 = 0,
  		.arg3 = 0,
  	};
+	acpi_status status;
 
  	status = alienware_wmax_command(&in_args, sizeof(in_args),
  					WMAX_METHOD_THERMAL_INFORMATION,
@@ -946,13 +946,13 @@ static int wmax_thermal_information(u8 operation, u8 arg, u32 *out_data)
 
  static int wmax_thermal_control(u8 profile)
  {
-	acpi_status status;
  	struct wmax_u32_args in_args = {
  		.operation = WMAX_OPERATION_ACTIVATE_PROFILE,
  		.arg1 = profile,
  		.arg2 = 0,
  		.arg3 = 0,
  	};
+	acpi_status status;
  	u32 out_data;
 
  	status = alienware_wmax_command(&in_args, sizeof(in_args),
@@ -970,13 +970,13 @@ static int wmax_thermal_control(u8 profile)
 
  static int wmax_game_shift_status(u8 operation, u32 *out_data)
  {
-	acpi_status status;
  	struct wmax_u32_args in_args = {
  		.operation = operation,
  		.arg1 = 0,
  		.arg2 = 0,
  		.arg3 = 0,
  	};
+	acpi_status status;
 
  	status = alienware_wmax_command(&in_args, sizeof(in_args),
  					WMAX_METHOD_GAME_SHIFT_STATUS,
@@ -1045,11 +1045,11 @@ static int thermal_profile_set(struct platform_profile_handler *pprof,
 
  static int create_thermal_profile(struct platform_device *platform_device)
  {
-	u32 out_data;
+	enum platform_profile_option profile;
+	enum wmax_thermal_mode mode;
  	u8 sys_desc[4];
  	u32 first_mode;
-	enum wmax_thermal_mode mode;
-	enum platform_profile_option profile;
+	u32 out_data;
  	int ret;
 
  	ret = wmax_thermal_information(WMAX_OPERATION_SYS_DESCRIPTION,
author maintainer
#16 lore raw

PATCH 7/20 alienware-wmi: Add a state container for LED control feature

In reply to Kurt Borja

Add a state container for the "alienware-wmi" platform device and initialize it on the new alienfx_probe(). Migrate all LED control functions to use this state container.

Additionally move the led_classdev registration to the platform driver probe and make it device managed.

Drop alienware_zone_init() and alienware_zone_exit() because they are no longer needed.

---
 drivers/platform/x86/dell/alienware-wmi.c | 128 +++++++++++++---------
 1 file changed, 76 insertions(+), 52 deletions(-)
drivers/platform/x86/dell/alienware-wmi.c +76 -52
index 67cf376df0f5..4b68d64bd742 100644
@@ -404,14 +404,19 @@ struct wmax_u32_args {
 	u8 arg3;
 };
 
+struct alienfx_priv {
+	struct platform_device *pdev;
+	struct led_classdev global_led;
+	struct color_platform colors[4];
+	u8 global_brightness;
+	u8 lighting_control_state;
+};
+
 static struct platform_device *platform_device;
-static struct color_platform colors[4];
 static struct platform_profile_handler pp_handler;
 static enum wmax_thermal_mode supported_thermal_profiles[PLATFORM_PROFILE_LAST];
 
 static u8 interface;
-static u8 lighting_control_state;
-static u8 global_brightness;
 
 /*
  * Helpers used for zone control
@@ -443,7 +448,7 @@ static int parse_rgb(const char *buf, struct color_platform *colors)
 /*
  * Individual RGB zone control
  */
-static int alienware_update_led(u8 location)
+static int alienware_update_led(struct alienfx_priv *priv, u8 location)
 {
 	int method_id;
 	acpi_status status;
@@ -453,21 +458,21 @@ static int alienware_update_led(u8 location)
 	struct wmax_led_args wmax_basic_args;
 	if (interface == WMAX) {
 		wmax_basic_args.led_mask = 1 << location;
-		wmax_basic_args.colors = colors[location];
-		wmax_basic_args.state = lighting_control_state;
+		wmax_basic_args.colors = priv->colors[location];
+		wmax_basic_args.state = priv->lighting_control_state;
 		guid = WMAX_CONTROL_GUID;
 		method_id = WMAX_METHOD_ZONE_CONTROL;
 
 		input.length = sizeof(wmax_basic_args);
 		input.pointer = &wmax_basic_args;
 	} else {
-		legacy_args.colors = colors[location];
-		legacy_args.brightness = global_brightness;
+		legacy_args.colors = priv->colors[location];
+		legacy_args.brightness = priv->global_brightness;
 		legacy_args.state = 0;
-		if (lighting_control_state == LEGACY_BOOTING ||
-		    lighting_control_state == LEGACY_SUSPEND) {
+		if (priv->lighting_control_state == LEGACY_BOOTING ||
+		    priv->lighting_control_state == LEGACY_SUSPEND) {
 			guid = LEGACY_POWER_CONTROL_GUID;
-			legacy_args.state = lighting_control_state;
+			legacy_args.state = priv->lighting_control_state;
 		} else
 			guid = LEGACY_CONTROL_GUID;
 		method_id = location + 1;
@@ -486,22 +491,32 @@ static int alienware_update_led(u8 location)
 static ssize_t zone_show(struct device *dev, struct device_attribute *attr,
 			 char *buf, u8 location)
 {
+	struct color_platform *colors;
+	struct alienfx_priv *priv;
+
+	priv = dev_get_drvdata(dev);
+	colors = &priv->colors[location];
+
 	return sprintf(buf, "red: %d, green: %d, blue: %d\n",
-		       colors[location].red, colors[location].green,
-		       colors[location].blue);
+		       colors->red, colors->green, colors->blue);
 
 }
 
 static ssize_t zone_store(struct device *dev, struct device_attribute *attr,
 			  const char *buf, size_t count, u8 location)
 {
+	struct color_platform *colors;
+	struct alienfx_priv *priv;
 	int ret;
 
-	ret = parse_rgb(buf, &colors[location]);
+	priv = dev_get_drvdata(dev);
+	colors = &priv->colors[location];
+
+	ret = parse_rgb(buf, colors);
 	if (ret)
 		return ret;
 
-	ret = alienware_update_led(location);
+	ret = alienware_update_led(priv, location);
 
 	return ret ? ret : count;
 }
@@ -539,9 +554,13 @@ static ssize_t lighting_control_state_show(struct device *dev,
 					   struct device_attribute *attr,
 					   char *buf)
 {
-	if (lighting_control_state == LEGACY_BOOTING)
+	struct alienfx_priv *priv;
+
+	priv = dev_get_drvdata(dev);
+
+	if (priv->lighting_control_state == LEGACY_BOOTING)
 		return sysfs_emit(buf, "[booting] running suspend\n");
-	else if (lighting_control_state == LEGACY_SUSPEND)
+	else if (priv->lighting_control_state == LEGACY_SUSPEND)
 		return sysfs_emit(buf, "booting running [suspend]\n");
 
 	return sysfs_emit(buf, "booting [running] suspend\n");
@@ -551,8 +570,11 @@ static ssize_t lighting_control_state_store(struct device *dev,
 					    struct device_attribute *attr,
 					    const char *buf, size_t count)
 {
+	struct alienfx_priv *priv;
 	u8 val;
 
+	priv = dev_get_drvdata(dev);
+
 	if (strcmp(buf, "booting\n") == 0)
 		val = LEGACY_BOOTING;
 	else if (strcmp(buf, "suspend\n") == 0)
@@ -562,9 +584,9 @@ static ssize_t lighting_control_state_store(struct device *dev,
 	else
 		val = WMAX_RUNNING;
 
-	lighting_control_state = val;
+	priv->lighting_control_state = val;
 	pr_debug("alienware-wmi: updated control state to %d\n",
-		 lighting_control_state);
+		 priv->lighting_control_state);
 
 	return count;
 }
@@ -621,43 +643,26 @@ static int wmax_brightness(int brightness)
 static void global_led_set(struct led_classdev *led_cdev,
 			   enum led_brightness brightness)
 {
+	struct alienfx_priv *priv;
 	int ret;
-	global_brightness = brightness;
+
+	priv = container_of(led_cdev, struct alienfx_priv, global_led);
+	priv->global_brightness = brightness;
 	if (interface == WMAX)
 		ret = wmax_brightness(brightness);
 	else
-		ret = alienware_update_led(0);
+		ret = alienware_update_led(priv, 0);
 	if (ret)
 		pr_err("LED brightness update failed\n");
 }
 
 static enum led_brightness global_led_get(struct led_classdev *led_cdev)
 {
-	return global_brightness;
-}
-
-static struct led_classdev global_led = {
-	.brightness_set = global_led_set,
-	.brightness_get = global_led_get,
-	.name = "alienware::global_brightness",
-};
-
-static int alienware_zone_init(struct platform_device *dev)
-{
-	if (interface == WMAX) {
-		lighting_control_state = WMAX_RUNNING;
-	} else if (interface == LEGACY) {
-		lighting_control_state = LEGACY_RUNNING;
-	}
-	global_led.max_brightness = 0x0F;
-	global_brightness = global_led.max_brightness;
+	struct alienfx_priv *priv;
 
-	return led_classdev_register(&dev->dev, &global_led);
-}
+	priv = container_of(led_cdev, struct alienfx_priv, global_led);
 
-static void alienware_zone_exit(struct platform_device *dev)
-{
-	led_classdev_unregister(&global_led);
+	return priv->global_brightness;
 }
 
 static acpi_status alienware_wmax_command(void *in_args, size_t in_size,
@@ -1106,6 +1111,32 @@ static void remove_thermal_profile(void)
 /*
  * Platform Driver
  */
+static int alienfx_probe(struct platform_device *pdev)
+{
+	struct alienfx_priv *priv;
+	struct led_classdev *leds;
+
+	priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
+	platform_set_drvdata(pdev, priv);
+
+	priv->pdev = pdev;
+
+	if (interface == WMAX)
+		priv->lighting_control_state = WMAX_RUNNING;
+	else if (interface == LEGACY)
+		priv->lighting_control_state = LEGACY_RUNNING;
+
+	leds = &priv->global_led;
+	leds->name = "alienware::global_brightness";
+	leds->brightness_set = global_led_set;
+	leds->brightness_get = global_led_get;
+	leds->max_brightness = 0x0F;
+
+	priv->global_brightness = priv->global_led.max_brightness;
+
+	return devm_led_classdev_register(&pdev->dev, &priv->global_led);
+}
+
 static const struct attribute_group *alienfx_groups[] = {
 	&zone_attribute_group,
 	&hdmi_attribute_group,
@@ -1119,6 +1150,7 @@ static struct platform_driver platform_driver = {
 		.name = "alienware-wmi",
 		.dev_groups = alienfx_groups,
 	},
+	.probe = alienfx_probe,
 };
 
 static int __init alienware_wmi_init(void)
@@ -1166,15 +1198,8 @@ static int __init alienware_wmi_init(void)
 			goto fail_prep_thermal_profile;
 	}
 
-	ret = alienware_zone_init(platform_device);
-	if (ret)
-		goto fail_prep_zones;
-
 	return 0;
 
-fail_prep_zones:
-	alienware_zone_exit(platform_device);
-	remove_thermal_profile();
 fail_prep_thermal_profile:
 	platform_device_del(platform_device);
 fail_platform_device2:
@@ -1189,7 +1214,6 @@ module_init(alienware_wmi_init);
 
 static void __exit alienware_wmi_exit(void)
 {
-	alienware_zone_exit(platform_device);
 	remove_thermal_profile();
 	platform_device_unregister(platform_device);
 	platform_driver_unregister(&platform_driver);
Signature · 1 line
2.47.1
#17 lore raw

Re: [PATCH 07/20] alienware-wmi: Add a state container for LED control feature

Am 21.12.24 um 06:59 schrieb Kurt Borja:

Quoted 81 lines

Add a state container for the "alienware-wmi" platform device and initialize it on the new alienfx_probe(). Migrate all LED control functions to use this state container.

Additionally move the led_classdev registration to the platform driver probe and make it device managed.

Drop alienware_zone_init() and alienware_zone_exit() because they are no longer needed.

---
  drivers/platform/x86/dell/alienware-wmi.c | 128 +++++++++++++---------
  1 file changed, 76 insertions(+), 52 deletions(-)
drivers/platform/x86/dell/alienware-wmi.c +16 -11
index 67cf376df0f5..4b68d64bd742 100644
@@ -404,14 +404,19 @@ struct wmax_u32_args {
  	u8 arg3;
  };
 
+struct alienfx_priv {
+	struct platform_device *pdev;
+	struct led_classdev global_led;
+	struct color_platform colors[4];
+	u8 global_brightness;
+	u8 lighting_control_state;
+};
+
  static struct platform_device *platform_device;
-static struct color_platform colors[4];
  static struct platform_profile_handler pp_handler;
  static enum wmax_thermal_mode supported_thermal_profiles[PLATFORM_PROFILE_LAST];
 
  static u8 interface;
-static u8 lighting_control_state;
-static u8 global_brightness;
 
  /*
   * Helpers used for zone control
@@ -443,7 +448,7 @@ static int parse_rgb(const char *buf, struct color_platform *colors)
  /*
   * Individual RGB zone control
   */
-static int alienware_update_led(u8 location)
+static int alienware_update_led(struct alienfx_priv *priv, u8 location)
  {
  	int method_id;
  	acpi_status status;
@@ -453,21 +458,21 @@ static int alienware_update_led(u8 location)
  	struct wmax_led_args wmax_basic_args;
  	if (interface == WMAX) {
  		wmax_basic_args.led_mask = 1 << location;
-		wmax_basic_args.colors = colors[location];
-		wmax_basic_args.state = lighting_control_state;
+		wmax_basic_args.colors = priv->colors[location];
+		wmax_basic_args.state = priv->lighting_control_state;
  		guid = WMAX_CONTROL_GUID;
  		method_id = WMAX_METHOD_ZONE_CONTROL;
 
  		input.length = sizeof(wmax_basic_args);
  		input.pointer = &wmax_basic_args;
  	} else {
-		legacy_args.colors = colors[location];
-		legacy_args.brightness = global_brightness;
+		legacy_args.colors = priv->colors[location];
+		legacy_args.brightness = priv->global_brightness;
  		legacy_args.state = 0;
-		if (lighting_control_state == LEGACY_BOOTING ||
-		    lighting_control_state == LEGACY_SUSPEND) {
+		if (priv->lighting_control_state == LEGACY_BOOTING ||
+		    priv->lighting_control_state == LEGACY_SUSPEND) {
  			guid = LEGACY_POWER_CONTROL_GUID;
-			legacy_args.state = lighting_control_state;
+			legacy_args.state = priv->lighting_control_state;
  		} else
  			guid = LEGACY_CONTROL_GUID;
  		method_id = location + 1;

drivers/platform/x86/dell/alienware-wmi.c static int alienware_update_led(u8 location) · line 497

Quoted 7 lines
drivers/platform/x86/dell/alienware-wmi.c +4 -0
@@ -486,22 +491,32 @@ static int alienware_update_led(u8 location)
  static ssize_t zone_show(struct device *dev, struct device_attribute *attr,
  			 char *buf, u8 location)
  {
+	struct color_platform *colors;
+	struct alienfx_priv *priv;
+
+	priv = dev_get_drvdata(dev);

Please use "struct color_platform *colors = dev_get_drvdata(dev);" in such cases.

Quoted 8 lines
drivers/platform/x86/dell/alienware-wmi.c +3 -2
+	colors = &priv->colors[location];
+
  	return sprintf(buf, "red: %d, green: %d, blue: %d\n",
-		       colors[location].red, colors[location].green,
-		       colors[location].blue);
+		       colors->red, colors->green, colors->blue);
 
  }

drivers/platform/x86/dell/alienware-wmi.c static int alienware_update_led(u8 location) · line 512

Quoted 10 lines
drivers/platform/x86/dell/alienware-wmi.c +3 -1
 
  static ssize_t zone_store(struct device *dev, struct device_attribute *attr,
  			  const char *buf, size_t count, u8 location)
  {
+	struct color_platform *colors;
+	struct alienfx_priv *priv;
  	int ret;
 
-	ret = parse_rgb(buf, &colors[location]);
+	priv = dev_get_drvdata(dev);

Same as above.

Quoted 12 lines
drivers/platform/x86/dell/alienware-wmi.c +4 -1
+	colors = &priv->colors[location];
+
+	ret = parse_rgb(buf, colors);
  	if (ret)
  		return ret;
 
-	ret = alienware_update_led(location);
+	ret = alienware_update_led(priv, location);
 
  	return ret ? ret : count;
  }

drivers/platform/x86/dell/alienware-wmi.c static ssize_t lighting_control_state_show(struct device *dev, · line 559

Quoted 7 lines
drivers/platform/x86/dell/alienware-wmi.c +3 -1
@@ -539,9 +554,13 @@ static ssize_t lighting_control_state_show(struct device *dev,
  					   struct device_attribute *attr,
  					   char *buf)
  {
-	if (lighting_control_state == LEGACY_BOOTING)
+	struct alienfx_priv *priv;
+
+	priv = dev_get_drvdata(dev);

Same as above.

Quoted 9 lines
drivers/platform/x86/dell/alienware-wmi.c +3 -1
+
+	if (priv->lighting_control_state == LEGACY_BOOTING)
  		return sysfs_emit(buf, "[booting] running suspend\n");
-	else if (lighting_control_state == LEGACY_SUSPEND)
+	else if (priv->lighting_control_state == LEGACY_SUSPEND)
  		return sysfs_emit(buf, "booting running [suspend]\n");
 
  	return sysfs_emit(buf, "booting [running] suspend\n");

drivers/platform/x86/dell/alienware-wmi.c static ssize_t lighting_control_state_store(struct device *dev, · line 576

Quoted 7 lines
drivers/platform/x86/dell/alienware-wmi.c +2 -0
@@ -551,8 +570,11 @@ static ssize_t lighting_control_state_store(struct device *dev,
  					    struct device_attribute *attr,
  					    const char *buf, size_t count)
  {
+	struct alienfx_priv *priv;
  	u8 val;
 
+	priv = dev_get_drvdata(dev);

Same as above.

Quoted 17 lines
drivers/platform/x86/dell/alienware-wmi.c +3 -2
+
  	if (strcmp(buf, "booting\n") == 0)
  		val = LEGACY_BOOTING;
  	else if (strcmp(buf, "suspend\n") == 0)
@@ -562,9 +584,9 @@ static ssize_t lighting_control_state_store(struct device *dev,
  	else
  		val = WMAX_RUNNING;
 
-	lighting_control_state = val;
+	priv->lighting_control_state = val;
  	pr_debug("alienware-wmi: updated control state to %d\n",
-		 lighting_control_state);
+		 priv->lighting_control_state);
 
  	return count;
  }

drivers/platform/x86/dell/alienware-wmi.c static int wmax_brightness(int brightness) · line 649

Quoted 8 lines
drivers/platform/x86/dell/alienware-wmi.c +3 -1
@@ -621,43 +643,26 @@ static int wmax_brightness(int brightness)
  static void global_led_set(struct led_classdev *led_cdev,
  			   enum led_brightness brightness)
  {
+	struct alienfx_priv *priv;
  	int ret;
-	global_brightness = brightness;
+
+	priv = container_of(led_cdev, struct alienfx_priv, global_led);

Same as above, but with container_of().

Quoted 25 lines
drivers/platform/x86/dell/alienware-wmi.c +2 -14
+	priv->global_brightness = brightness;
  	if (interface == WMAX)
  		ret = wmax_brightness(brightness);
  	else
-		ret = alienware_update_led(0);
+		ret = alienware_update_led(priv, 0);
  	if (ret)
  		pr_err("LED brightness update failed\n");
  }
 
  static enum led_brightness global_led_get(struct led_classdev *led_cdev)
  {
-	return global_brightness;
-}
-
-static struct led_classdev global_led = {
-	.brightness_set = global_led_set,
-	.brightness_get = global_led_get,
-	.name = "alienware::global_brightness",
-};
-
-static int alienware_zone_init(struct platform_device *dev)
-{
-	if (interface == WMAX) {
-		lighting_control_state = WMAX_RUNNING;

drivers/platform/x86/dell/alienware-wmi.c static int wmax_brightness(int brightness) · line 663

Quoted 10 lines
drivers/platform/x86/dell/alienware-wmi.c +2 -7
-	} else if (interface == LEGACY) {
-		lighting_control_state = LEGACY_RUNNING;
-	}
-	global_led.max_brightness = 0x0F;
-	global_brightness = global_led.max_brightness;
+	struct alienfx_priv *priv;
 
-	return led_classdev_register(&dev->dev, &global_led);
-}
+	priv = container_of(led_cdev, struct alienfx_priv, global_led);

Same as above.

Quoted 9 lines
drivers/platform/x86/dell/alienware-wmi.c +1 -3
-static void alienware_zone_exit(struct platform_device *dev)
-{
-	led_classdev_unregister(&global_led);
+	return priv->global_brightness;
  }
 
  static acpi_status alienware_wmax_command(void *in_args, size_t in_size,

drivers/platform/x86/dell/alienware-wmi.c static void remove_thermal_profile(void) · line 1119

Quoted 9 lines
drivers/platform/x86/dell/alienware-wmi.c +6 -0
@@ -1106,6 +1111,32 @@ static void remove_thermal_profile(void)
  /*
   * Platform Driver
   */
+static int alienfx_probe(struct platform_device *pdev)
+{
+	struct alienfx_priv *priv;
+	struct led_classdev *leds;
+
+	priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);

Missing error handling.

drivers/platform/x86/dell/alienware-wmi.c static void remove_thermal_profile(void) · line 1129

Quoted 10 lines
drivers/platform/x86/dell/alienware-wmi.c +10 -0
+	platform_set_drvdata(pdev, priv);
+
+	priv->pdev = pdev;
+
+	if (interface == WMAX)
+		priv->lighting_control_state = WMAX_RUNNING;
+	else if (interface == LEGACY)
+		priv->lighting_control_state = LEGACY_RUNNING;
+
+	leds = &priv->global_led;

I do not think that "leds" has any real benefit here, please use "priv->global_led" directly.

Thanks,
Armin Wolf

Quoted 45 lines
drivers/platform/x86/dell/alienware-wmi.c +11 -8
+	leds->name = "alienware::global_brightness";
+	leds->brightness_set = global_led_set;
+	leds->brightness_get = global_led_get;
+	leds->max_brightness = 0x0F;
+
+	priv->global_brightness = priv->global_led.max_brightness;
+
+	return devm_led_classdev_register(&pdev->dev, &priv->global_led);
+}
+
  static const struct attribute_group *alienfx_groups[] = {
  	&zone_attribute_group,
  	&hdmi_attribute_group,
@@ -1119,6 +1150,7 @@ static struct platform_driver platform_driver = {
  		.name = "alienware-wmi",
  		.dev_groups = alienfx_groups,
  	},
+	.probe = alienfx_probe,
  };
 
  static int __init alienware_wmi_init(void)
@@ -1166,15 +1198,8 @@ static int __init alienware_wmi_init(void)
  			goto fail_prep_thermal_profile;
  	}
 
-	ret = alienware_zone_init(platform_device);
-	if (ret)
-		goto fail_prep_zones;
-
  	return 0;
 
-fail_prep_zones:
-	alienware_zone_exit(platform_device);
-	remove_thermal_profile();
  fail_prep_thermal_profile:
  	platform_device_del(platform_device);
  fail_platform_device2:
@@ -1189,7 +1214,6 @@ module_init(alienware_wmi_init);
 
  static void __exit alienware_wmi_exit(void)
  {
-	alienware_zone_exit(platform_device);
  	remove_thermal_profile();
  	platform_device_unregister(platform_device);
  	platform_driver_unregister(&platform_driver);
author maintainer
#18 lore raw

Re: [PATCH 07/20] alienware-wmi: Add a state container for LED control feature

Quoted 215 lines · Armin Wolf

Am 21.12.24 um 06:59 schrieb Kurt Borja:

Quoted 81 lines

Add a state container for the "alienware-wmi" platform device and initialize it on the new alienfx_probe(). Migrate all LED control functions to use this state container.

Additionally move the led_classdev registration to the platform driver probe and make it device managed.

Drop alienware_zone_init() and alienware_zone_exit() because they are no longer needed.

---
  drivers/platform/x86/dell/alienware-wmi.c | 128 +++++++++++++---------
  1 file changed, 76 insertions(+), 52 deletions(-)
drivers/platform/x86/dell/alienware-wmi.c +16 -11
index 67cf376df0f5..4b68d64bd742 100644
@@ -404,14 +404,19 @@ struct wmax_u32_args {
  	u8 arg3;
  };
 
+struct alienfx_priv {
+	struct platform_device *pdev;
+	struct led_classdev global_led;
+	struct color_platform colors[4];
+	u8 global_brightness;
+	u8 lighting_control_state;
+};
+
  static struct platform_device *platform_device;
-static struct color_platform colors[4];
  static struct platform_profile_handler pp_handler;
  static enum wmax_thermal_mode supported_thermal_profiles[PLATFORM_PROFILE_LAST];
 
  static u8 interface;
-static u8 lighting_control_state;
-static u8 global_brightness;
 
  /*
   * Helpers used for zone control
@@ -443,7 +448,7 @@ static int parse_rgb(const char *buf, struct color_platform *colors)
  /*
   * Individual RGB zone control
   */
-static int alienware_update_led(u8 location)
+static int alienware_update_led(struct alienfx_priv *priv, u8 location)
  {
  	int method_id;
  	acpi_status status;
@@ -453,21 +458,21 @@ static int alienware_update_led(u8 location)
  	struct wmax_led_args wmax_basic_args;
  	if (interface == WMAX) {
  		wmax_basic_args.led_mask = 1 << location;
-		wmax_basic_args.colors = colors[location];
-		wmax_basic_args.state = lighting_control_state;
+		wmax_basic_args.colors = priv->colors[location];
+		wmax_basic_args.state = priv->lighting_control_state;
  		guid = WMAX_CONTROL_GUID;
  		method_id = WMAX_METHOD_ZONE_CONTROL;
 
  		input.length = sizeof(wmax_basic_args);
  		input.pointer = &wmax_basic_args;
  	} else {
-		legacy_args.colors = colors[location];
-		legacy_args.brightness = global_brightness;
+		legacy_args.colors = priv->colors[location];
+		legacy_args.brightness = priv->global_brightness;
  		legacy_args.state = 0;
-		if (lighting_control_state == LEGACY_BOOTING ||
-		    lighting_control_state == LEGACY_SUSPEND) {
+		if (priv->lighting_control_state == LEGACY_BOOTING ||
+		    priv->lighting_control_state == LEGACY_SUSPEND) {
  			guid = LEGACY_POWER_CONTROL_GUID;
-			legacy_args.state = lighting_control_state;
+			legacy_args.state = priv->lighting_control_state;
  		} else
  			guid = LEGACY_CONTROL_GUID;
  		method_id = location + 1;

drivers/platform/x86/dell/alienware-wmi.c static int alienware_update_led(u8 location) · line 497

Quoted 7 lines
drivers/platform/x86/dell/alienware-wmi.c +4 -0
@@ -486,22 +491,32 @@ static int alienware_update_led(u8 location)
  static ssize_t zone_show(struct device *dev, struct device_attribute *attr,
  			 char *buf, u8 location)
  {
+	struct color_platform *colors;
+	struct alienfx_priv *priv;
+
+	priv = dev_get_drvdata(dev);

Please use "struct color_platform *colors = dev_get_drvdata(dev);" in such cases.

Quoted 8 lines
drivers/platform/x86/dell/alienware-wmi.c +3 -2
+	colors = &priv->colors[location];
+
  	return sprintf(buf, "red: %d, green: %d, blue: %d\n",
-		       colors[location].red, colors[location].green,
-		       colors[location].blue);
+		       colors->red, colors->green, colors->blue);
 
  }

drivers/platform/x86/dell/alienware-wmi.c static int alienware_update_led(u8 location) · line 512

Quoted 10 lines
drivers/platform/x86/dell/alienware-wmi.c +3 -1
 
  static ssize_t zone_store(struct device *dev, struct device_attribute *attr,
  			  const char *buf, size_t count, u8 location)
  {
+	struct color_platform *colors;
+	struct alienfx_priv *priv;
  	int ret;
 
-	ret = parse_rgb(buf, &colors[location]);
+	priv = dev_get_drvdata(dev);

Same as above.

Quoted 12 lines
drivers/platform/x86/dell/alienware-wmi.c +4 -1
+	colors = &priv->colors[location];
+
+	ret = parse_rgb(buf, colors);
  	if (ret)
  		return ret;
 
-	ret = alienware_update_led(location);
+	ret = alienware_update_led(priv, location);
 
  	return ret ? ret : count;
  }

drivers/platform/x86/dell/alienware-wmi.c static ssize_t lighting_control_state_show(struct device *dev, · line 559

Quoted 7 lines
drivers/platform/x86/dell/alienware-wmi.c +3 -1
@@ -539,9 +554,13 @@ static ssize_t lighting_control_state_show(struct device *dev,
  					   struct device_attribute *attr,
  					   char *buf)
  {
-	if (lighting_control_state == LEGACY_BOOTING)
+	struct alienfx_priv *priv;
+
+	priv = dev_get_drvdata(dev);

Same as above.

Quoted 9 lines
drivers/platform/x86/dell/alienware-wmi.c +3 -1
+
+	if (priv->lighting_control_state == LEGACY_BOOTING)
  		return sysfs_emit(buf, "[booting] running suspend\n");
-	else if (lighting_control_state == LEGACY_SUSPEND)
+	else if (priv->lighting_control_state == LEGACY_SUSPEND)
  		return sysfs_emit(buf, "booting running [suspend]\n");
 
  	return sysfs_emit(buf, "booting [running] suspend\n");

drivers/platform/x86/dell/alienware-wmi.c static ssize_t lighting_control_state_store(struct device *dev, · line 576

Quoted 7 lines
drivers/platform/x86/dell/alienware-wmi.c +2 -0
@@ -551,8 +570,11 @@ static ssize_t lighting_control_state_store(struct device *dev,
  					    struct device_attribute *attr,
  					    const char *buf, size_t count)
  {
+	struct alienfx_priv *priv;
  	u8 val;
 
+	priv = dev_get_drvdata(dev);

Same as above.

Quoted 17 lines
drivers/platform/x86/dell/alienware-wmi.c +3 -2
+
  	if (strcmp(buf, "booting\n") == 0)
  		val = LEGACY_BOOTING;
  	else if (strcmp(buf, "suspend\n") == 0)
@@ -562,9 +584,9 @@ static ssize_t lighting_control_state_store(struct device *dev,
  	else
  		val = WMAX_RUNNING;
 
-	lighting_control_state = val;
+	priv->lighting_control_state = val;
  	pr_debug("alienware-wmi: updated control state to %d\n",
-		 lighting_control_state);
+		 priv->lighting_control_state);
 
  	return count;
  }

drivers/platform/x86/dell/alienware-wmi.c static int wmax_brightness(int brightness) · line 649

Quoted 8 lines
drivers/platform/x86/dell/alienware-wmi.c +3 -1
@@ -621,43 +643,26 @@ static int wmax_brightness(int brightness)
  static void global_led_set(struct led_classdev *led_cdev,
  			   enum led_brightness brightness)
  {
+	struct alienfx_priv *priv;
  	int ret;
-	global_brightness = brightness;
+
+	priv = container_of(led_cdev, struct alienfx_priv, global_led);

Same as above, but with container_of().

Quoted 32 lines
drivers/platform/x86/dell/alienware-wmi.c +3 -19
+	priv->global_brightness = brightness;
  	if (interface == WMAX)
  		ret = wmax_brightness(brightness);
  	else
-		ret = alienware_update_led(0);
+		ret = alienware_update_led(priv, 0);
  	if (ret)
  		pr_err("LED brightness update failed\n");
  }
 
  static enum led_brightness global_led_get(struct led_classdev *led_cdev)
  {
-	return global_brightness;
-}
-
-static struct led_classdev global_led = {
-	.brightness_set = global_led_set,
-	.brightness_get = global_led_get,
-	.name = "alienware::global_brightness",
-};
-
-static int alienware_zone_init(struct platform_device *dev)
-{
-	if (interface == WMAX) {
-		lighting_control_state = WMAX_RUNNING;
-	} else if (interface == LEGACY) {
-		lighting_control_state = LEGACY_RUNNING;
-	}
-	global_led.max_brightness = 0x0F;
-	global_brightness = global_led.max_brightness;
+	struct alienfx_priv *priv;
 
Quoted 5 lines

drivers/platform/x86/dell/alienware-wmi.c static int wmax_brightness(int brightness) · line 663

Quoted 3 lines
drivers/platform/x86/dell/alienware-wmi.c +1 -2
-	return led_classdev_register(&dev->dev, &global_led);
-}
+	priv = container_of(led_cdev, struct alienfx_priv, global_led);

Same as above.

Ack all of these.

Quoted 8 lines
Quoted 8 lines
drivers/platform/x86/dell/alienware-wmi.c +1 -3
-static void alienware_zone_exit(struct platform_device *dev)
-{
-	led_classdev_unregister(&global_led);
+	return priv->global_brightness;
  }
 
Quoted 13 lines

drivers/platform/x86/dell/alienware-wmi.c static void remove_thermal_profile(void) · line 1119

Quoted 11 lines
drivers/platform/x86/dell/alienware-wmi.c +6 -0
  static acpi_status alienware_wmax_command(void *in_args, size_t in_size,
@@ -1106,6 +1111,32 @@ static void remove_thermal_profile(void)
  /*
   * Platform Driver
   */
+static int alienfx_probe(struct platform_device *pdev)
+{
+	struct alienfx_priv *priv;
+	struct led_classdev *leds;
+
+	priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);

Missing error handling.

Thanks!

Quoted 13 lines

drivers/platform/x86/dell/alienware-wmi.c static void remove_thermal_profile(void) · line 1129

Quoted 11 lines
drivers/platform/x86/dell/alienware-wmi.c +10 -0
+	platform_set_drvdata(pdev, priv);
+
+	priv->pdev = pdev;
+
+	if (interface == WMAX)
+		priv->lighting_control_state = WMAX_RUNNING;
+	else if (interface == LEGACY)
+		priv->lighting_control_state = LEGACY_RUNNING;
+
+	leds = &priv->global_led;

I do not think that "leds" has any real benefit here, please use "priv->global_led" directly.

Removed.

Quoted 49 lines

Thanks,
Armin Wolf

Quoted 45 lines
drivers/platform/x86/dell/alienware-wmi.c +11 -8
+	leds->name = "alienware::global_brightness";
+	leds->brightness_set = global_led_set;
+	leds->brightness_get = global_led_get;
+	leds->max_brightness = 0x0F;
+
+	priv->global_brightness = priv->global_led.max_brightness;
+
+	return devm_led_classdev_register(&pdev->dev, &priv->global_led);
+}
+
  static const struct attribute_group *alienfx_groups[] = {
  	&zone_attribute_group,
  	&hdmi_attribute_group,
@@ -1119,6 +1150,7 @@ static struct platform_driver platform_driver = {
  		.name = "alienware-wmi",
  		.dev_groups = alienfx_groups,
  	},
+	.probe = alienfx_probe,
  };
 
  static int __init alienware_wmi_init(void)
@@ -1166,15 +1198,8 @@ static int __init alienware_wmi_init(void)
  			goto fail_prep_thermal_profile;
  	}
 
-	ret = alienware_zone_init(platform_device);
-	if (ret)
-		goto fail_prep_zones;
-
  	return 0;
 
-fail_prep_zones:
-	alienware_zone_exit(platform_device);
-	remove_thermal_profile();
  fail_prep_thermal_profile:
  	platform_device_del(platform_device);
  fail_platform_device2:
@@ -1189,7 +1214,6 @@ module_init(alienware_wmi_init);
 
  static void __exit alienware_wmi_exit(void)
  {
-	alienware_zone_exit(platform_device);
  	remove_thermal_profile();
  	platform_device_unregister(platform_device);
  	platform_driver_unregister(&platform_driver);
author maintainer
#19 lore raw

PATCH 8/20 alienware-wmi: Add WMI Drivers

In reply to Kurt Borja

Add WMI drivers for LEGACY and WMAX devices.

This involves moving platform driver and device registration to a helper function, which is now called from the driver's preferred WMI device driver probe. However this is only done if !quirks->thermal because newer WMAX interface doesn't support any of the features exposed by this device.

Only one driver is registered on module initialization to prevent registering duplicate platform driver and device.

Aditionally, create_thermal_profile() now takes wmi_device * instead of platform_device *.

---
 drivers/platform/x86/dell/alienware-wmi.c | 186 +++++++++++++++++-----
 1 file changed, 146 insertions(+), 40 deletions(-)
drivers/platform/x86/dell/alienware-wmi.c +146 -40
index 4b68d64bd742..f2f6842e27e6 100644
@@ -15,6 +15,7 @@
 #include <linux/platform_profile.h>
 #include <linux/dmi.h>
 #include <linux/leds.h>
+#include <linux/wmi.h>
 
 #define LEGACY_CONTROL_GUID		"A90597CE-A997-11DA-B012-B622A1EF5492"
 #define LEGACY_POWER_CONTROL_GUID	"A80593CE-A997-11DA-B012-B622A1EF5492"
@@ -39,8 +40,6 @@
 MODULE_AUTHOR("Mario Limonciello <[email protected]>");
 MODULE_DESCRIPTION("Alienware special feature control");
 MODULE_LICENSE("GPL");
-MODULE_ALIAS("wmi:" LEGACY_CONTROL_GUID);
-MODULE_ALIAS("wmi:" WMAX_CONTROL_GUID);
 
 static bool force_platform_profile;
 module_param_unsafe(force_platform_profile, bool, 0);
@@ -412,7 +411,10 @@ struct alienfx_priv {
 	u8 lighting_control_state;
 };
 
-static struct platform_device *platform_device;
+struct alienfx_platdata {
+	struct wmi_device *wdev;
+};
+
 static struct platform_profile_handler pp_handler;
 static enum wmax_thermal_mode supported_thermal_profiles[PLATFORM_PROFILE_LAST];
 
@@ -1048,7 +1050,7 @@ static int thermal_profile_set(struct platform_profile_handler *pprof,
 	return wmax_thermal_control(supported_thermal_profiles[profile]);
 }
 
-static int create_thermal_profile(struct platform_device *platform_device)
+static int create_thermal_profile(struct wmi_device *wdev)
 {
 	enum platform_profile_option profile;
 	enum wmax_thermal_mode mode;
@@ -1097,7 +1099,7 @@ static int create_thermal_profile(struct platform_device *platform_device)
 	pp_handler.profile_get = thermal_profile_get;
 	pp_handler.profile_set = thermal_profile_set;
 	pp_handler.name = "alienware-wmi";
-	pp_handler.dev = &platform_device->dev;
+	pp_handler.dev = &wdev->dev;
 
 	return platform_profile_register(&pp_handler);
 }
@@ -1153,19 +1155,138 @@ static struct platform_driver platform_driver = {
 	.probe = alienfx_probe,
 };
 
-static int __init alienware_wmi_init(void)
+static int alienware_alienfx_setup(struct alienfx_platdata *pdata)
 {
+	struct platform_device *pdev;
 	int ret;
 
-	if (wmi_has_guid(LEGACY_CONTROL_GUID))
-		interface = LEGACY;
-	else if (wmi_has_guid(WMAX_CONTROL_GUID))
-		interface = WMAX;
-	else {
-		pr_warn("alienware-wmi: No known WMI GUID found\n");
-		return -ENODEV;
+	ret = platform_driver_register(&platform_driver);
+	if (ret < 0)
+		return ret;
+
+	pdev = platform_device_register_data(NULL, "alienware-wmi",
+					     PLATFORM_DEVID_NONE, pdata,
+					     sizeof(*pdata));
+
+	if (IS_ERR(pdev)) {
+		platform_driver_unregister(&platform_driver);
+		return PTR_ERR(pdev);
 	}
 
+	dev_set_drvdata(&pdata->wdev->dev, pdev);
+
+	return 0;
+}
+
+static void alienware_alienfx_exit(struct wmi_device *wdev)
+{
+	struct platform_device *pdev;
+
+	pdev = dev_get_drvdata(&wdev->dev);
+
+	platform_device_unregister(pdev);
+	platform_driver_unregister(&platform_driver);
+}
+
+/*
+ * Legacy WMI driver
+ */
+static int legacy_wmi_probe(struct wmi_device *wdev, const void *context)
+{
+	struct alienfx_platdata pdata = {
+		.wdev = wdev,
+	};
+
+	return alienware_alienfx_setup(&pdata);
+}
+
+static void legacy_wmi_remove(struct wmi_device *wdev)
+{
+	alienware_alienfx_exit(wdev);
+}
+
+static struct wmi_device_id alienware_legacy_device_id_table[] = {
+	{ LEGACY_CONTROL_GUID, NULL },
+	{ },
+};
+MODULE_DEVICE_TABLE(wmi, alienware_legacy_device_id_table);
+
+static struct wmi_driver alienware_legacy_wmi_driver = {
+	.driver = {
+		.name = "alienware-wmi-alienfx",
+		.probe_type = PROBE_PREFER_ASYNCHRONOUS,
+	},
+	.id_table = alienware_legacy_device_id_table,
+	.probe = legacy_wmi_probe,
+	.remove = legacy_wmi_remove,
+};
+
+static int __init alienware_legacy_wmi_init(void)
+{
+	return wmi_driver_register(&alienware_legacy_wmi_driver);
+}
+
+static void __exit alienware_legacy_wmi_exit(void)
+{
+	wmi_driver_unregister(&alienware_legacy_wmi_driver);
+}
+
+/*
+ * WMAX WMI driver
+ */
+static int wmax_wmi_probe(struct wmi_device *wdev, const void *context)
+{
+	struct alienfx_platdata pdata = {
+		.wdev = wdev,
+	};
+	int ret = 0;
+
+	if (quirks->thermal)
+		ret = create_thermal_profile(wdev);
+	else
+		ret = alienware_alienfx_setup(&pdata);
+
+	return ret;
+}
+
+static void wmax_wmi_remove(struct wmi_device *wdev)
+{
+	if (quirks->thermal)
+		remove_thermal_profile();
+	else
+		alienware_alienfx_exit(wdev);
+}
+
+static struct wmi_device_id alienware_wmax_device_id_table[] = {
+	{ WMAX_CONTROL_GUID, NULL },
+	{ },
+};
+MODULE_DEVICE_TABLE(wmi, alienware_wmax_device_id_table);
+
+static struct wmi_driver alienware_wmax_wmi_driver = {
+	.driver = {
+		.name = "alienware-wmi-wmax",
+		.probe_type = PROBE_PREFER_ASYNCHRONOUS,
+	},
+	.id_table = alienware_wmax_device_id_table,
+	.probe = wmax_wmi_probe,
+	.remove = wmax_wmi_remove,
+};
+
+static int __init alienware_wmax_wmi_init(void)
+{
+	return wmi_driver_register(&alienware_wmax_wmi_driver);
+}
+
+static void __exit alienware_wmax_wmi_exit(void)
+{
+	wmi_driver_unregister(&alienware_wmax_wmi_driver);
+}
+
+static int __init alienware_wmi_init(void)
+{
+	int ret;
+
 	dmi_check_system(alienware_quirks);
 	if (quirks == NULL)
 		quirks = &quirk_unknown;
@@ -1180,43 +1301,28 @@ static int __init alienware_wmi_init(void)
 			pr_warn("force_gmode requires platform profile support\n");
 	}
 
-	ret = platform_driver_register(&platform_driver);
-	if (ret)
-		goto fail_platform_driver;
-	platform_device = platform_device_alloc("alienware-wmi", PLATFORM_DEVID_NONE);
-	if (!platform_device) {
-		ret = -ENOMEM;
-		goto fail_platform_device1;
+	if (wmi_has_guid(WMAX_CONTROL_GUID)) {
+		interface = WMAX;
+		ret = alienware_wmax_wmi_init();
+	} else {
+		interface = LEGACY;
+		ret = alienware_legacy_wmi_init();
 	}
-	ret = platform_device_add(platform_device);
-	if (ret)
-		goto fail_platform_device2;
 
-	if (quirks->thermal) {
-		ret = create_thermal_profile(platform_device);
-		if (ret)
-			goto fail_prep_thermal_profile;
-	}
+	if (ret < 0)
+		return ret;
 
 	return 0;
-
-fail_prep_thermal_profile:
-	platform_device_del(platform_device);
-fail_platform_device2:
-	platform_device_put(platform_device);
-fail_platform_device1:
-	platform_driver_unregister(&platform_driver);
-fail_platform_driver:
-	return ret;
 }
 
 module_init(alienware_wmi_init);
 
 static void __exit alienware_wmi_exit(void)
 {
-	remove_thermal_profile();
-	platform_device_unregister(platform_device);
-	platform_driver_unregister(&platform_driver);
+	if (interface == WMAX)
+		alienware_wmax_wmi_exit();
+	else
+		alienware_legacy_wmi_exit();
 }
 
 module_exit(alienware_wmi_exit);
Signature · 1 line
2.47.1
#20 lore raw

Re: [PATCH 08/20] alienware-wmi: Add WMI Drivers

Am 21.12.24 um 06:59 schrieb Kurt Borja:

Quoted 8 lines

Add WMI drivers for LEGACY and WMAX devices.

This involves moving platform driver and device registration to a helper function, which is now called from the driver's preferred WMI device driver probe. However this is only done if !quirks->thermal because newer WMAX interface doesn't support any of the features exposed by this device.

Quoted 5 lines

Only one driver is registered on module initialization to prevent registering duplicate platform driver and device.

Aditionally, create_thermal_profile() now takes wmi_device * instead of platform_device *.

Since the HDMI, Amplifier and deepslp groups depend on the WMAX interface i would register them inside wmax_wmi_probe() using device_add_groups() (you might need to rework alienware_alienfx_setup() for that).

In the end the only code shared between both drivers should be related to the LED handling. Everything else AFAIK depends on the WMAX interface and should therefore be inside the WMAX driver.

Thanks,
Armin Wolf

Quoted 260 lines
---
  drivers/platform/x86/dell/alienware-wmi.c | 186 +++++++++++++++++-----
  1 file changed, 146 insertions(+), 40 deletions(-)
drivers/platform/x86/dell/alienware-wmi.c +146 -40
index 4b68d64bd742..f2f6842e27e6 100644
@@ -15,6 +15,7 @@
  #include <linux/platform_profile.h>
  #include <linux/dmi.h>
  #include <linux/leds.h>
+#include <linux/wmi.h>
 
  #define LEGACY_CONTROL_GUID		"A90597CE-A997-11DA-B012-B622A1EF5492"
  #define LEGACY_POWER_CONTROL_GUID	"A80593CE-A997-11DA-B012-B622A1EF5492"
@@ -39,8 +40,6 @@
  MODULE_AUTHOR("Mario Limonciello <[email protected]>");
  MODULE_DESCRIPTION("Alienware special feature control");
  MODULE_LICENSE("GPL");
-MODULE_ALIAS("wmi:" LEGACY_CONTROL_GUID);
-MODULE_ALIAS("wmi:" WMAX_CONTROL_GUID);
 
  static bool force_platform_profile;
  module_param_unsafe(force_platform_profile, bool, 0);
@@ -412,7 +411,10 @@ struct alienfx_priv {
  	u8 lighting_control_state;
  };
 
-static struct platform_device *platform_device;
+struct alienfx_platdata {
+	struct wmi_device *wdev;
+};
+
  static struct platform_profile_handler pp_handler;
  static enum wmax_thermal_mode supported_thermal_profiles[PLATFORM_PROFILE_LAST];
 
@@ -1048,7 +1050,7 @@ static int thermal_profile_set(struct platform_profile_handler *pprof,
  	return wmax_thermal_control(supported_thermal_profiles[profile]);
  }
 
-static int create_thermal_profile(struct platform_device *platform_device)
+static int create_thermal_profile(struct wmi_device *wdev)
  {
  	enum platform_profile_option profile;
  	enum wmax_thermal_mode mode;
@@ -1097,7 +1099,7 @@ static int create_thermal_profile(struct platform_device *platform_device)
  	pp_handler.profile_get = thermal_profile_get;
  	pp_handler.profile_set = thermal_profile_set;
  	pp_handler.name = "alienware-wmi";
-	pp_handler.dev = &platform_device->dev;
+	pp_handler.dev = &wdev->dev;
 
  	return platform_profile_register(&pp_handler);
  }
@@ -1153,19 +1155,138 @@ static struct platform_driver platform_driver = {
  	.probe = alienfx_probe,
  };
 
-static int __init alienware_wmi_init(void)
+static int alienware_alienfx_setup(struct alienfx_platdata *pdata)
  {
+	struct platform_device *pdev;
  	int ret;
 
-	if (wmi_has_guid(LEGACY_CONTROL_GUID))
-		interface = LEGACY;
-	else if (wmi_has_guid(WMAX_CONTROL_GUID))
-		interface = WMAX;
-	else {
-		pr_warn("alienware-wmi: No known WMI GUID found\n");
-		return -ENODEV;
+	ret = platform_driver_register(&platform_driver);
+	if (ret < 0)
+		return ret;
+
+	pdev = platform_device_register_data(NULL, "alienware-wmi",
+					     PLATFORM_DEVID_NONE, pdata,
+					     sizeof(*pdata));
+
+	if (IS_ERR(pdev)) {
+		platform_driver_unregister(&platform_driver);
+		return PTR_ERR(pdev);
  	}
 
+	dev_set_drvdata(&pdata->wdev->dev, pdev);
+
+	return 0;
+}
+
+static void alienware_alienfx_exit(struct wmi_device *wdev)
+{
+	struct platform_device *pdev;
+
+	pdev = dev_get_drvdata(&wdev->dev);
+
+	platform_device_unregister(pdev);
+	platform_driver_unregister(&platform_driver);
+}
+
+/*
+ * Legacy WMI driver
+ */
+static int legacy_wmi_probe(struct wmi_device *wdev, const void *context)
+{
+	struct alienfx_platdata pdata = {
+		.wdev = wdev,
+	};
+
+	return alienware_alienfx_setup(&pdata);
+}
+
+static void legacy_wmi_remove(struct wmi_device *wdev)
+{
+	alienware_alienfx_exit(wdev);
+}
+
+static struct wmi_device_id alienware_legacy_device_id_table[] = {
+	{ LEGACY_CONTROL_GUID, NULL },
+	{ },
+};
+MODULE_DEVICE_TABLE(wmi, alienware_legacy_device_id_table);
+
+static struct wmi_driver alienware_legacy_wmi_driver = {
+	.driver = {
+		.name = "alienware-wmi-alienfx",
+		.probe_type = PROBE_PREFER_ASYNCHRONOUS,
+	},
+	.id_table = alienware_legacy_device_id_table,
+	.probe = legacy_wmi_probe,
+	.remove = legacy_wmi_remove,
+};
+
+static int __init alienware_legacy_wmi_init(void)
+{
+	return wmi_driver_register(&alienware_legacy_wmi_driver);
+}
+
+static void __exit alienware_legacy_wmi_exit(void)
+{
+	wmi_driver_unregister(&alienware_legacy_wmi_driver);
+}
+
+/*
+ * WMAX WMI driver
+ */
+static int wmax_wmi_probe(struct wmi_device *wdev, const void *context)
+{
+	struct alienfx_platdata pdata = {
+		.wdev = wdev,
+	};
+	int ret = 0;
+
+	if (quirks->thermal)
+		ret = create_thermal_profile(wdev);
+	else
+		ret = alienware_alienfx_setup(&pdata);
+
+	return ret;
+}
+
+static void wmax_wmi_remove(struct wmi_device *wdev)
+{
+	if (quirks->thermal)
+		remove_thermal_profile();
+	else
+		alienware_alienfx_exit(wdev);
+}
+
+static struct wmi_device_id alienware_wmax_device_id_table[] = {
+	{ WMAX_CONTROL_GUID, NULL },
+	{ },
+};
+MODULE_DEVICE_TABLE(wmi, alienware_wmax_device_id_table);
+
+static struct wmi_driver alienware_wmax_wmi_driver = {
+	.driver = {
+		.name = "alienware-wmi-wmax",
+		.probe_type = PROBE_PREFER_ASYNCHRONOUS,
+	},
+	.id_table = alienware_wmax_device_id_table,
+	.probe = wmax_wmi_probe,
+	.remove = wmax_wmi_remove,
+};
+
+static int __init alienware_wmax_wmi_init(void)
+{
+	return wmi_driver_register(&alienware_wmax_wmi_driver);
+}
+
+static void __exit alienware_wmax_wmi_exit(void)
+{
+	wmi_driver_unregister(&alienware_wmax_wmi_driver);
+}
+
+static int __init alienware_wmi_init(void)
+{
+	int ret;
+
  	dmi_check_system(alienware_quirks);
  	if (quirks == NULL)
  		quirks = &quirk_unknown;
@@ -1180,43 +1301,28 @@ static int __init alienware_wmi_init(void)
  			pr_warn("force_gmode requires platform profile support\n");
  	}
 
-	ret = platform_driver_register(&platform_driver);
-	if (ret)
-		goto fail_platform_driver;
-	platform_device = platform_device_alloc("alienware-wmi", PLATFORM_DEVID_NONE);
-	if (!platform_device) {
-		ret = -ENOMEM;
-		goto fail_platform_device1;
+	if (wmi_has_guid(WMAX_CONTROL_GUID)) {
+		interface = WMAX;
+		ret = alienware_wmax_wmi_init();
+	} else {
+		interface = LEGACY;
+		ret = alienware_legacy_wmi_init();
  	}
-	ret = platform_device_add(platform_device);
-	if (ret)
-		goto fail_platform_device2;
 
-	if (quirks->thermal) {
-		ret = create_thermal_profile(platform_device);
-		if (ret)
-			goto fail_prep_thermal_profile;
-	}
+	if (ret < 0)
+		return ret;
 
  	return 0;
-
-fail_prep_thermal_profile:
-	platform_device_del(platform_device);
-fail_platform_device2:
-	platform_device_put(platform_device);
-fail_platform_device1:
-	platform_driver_unregister(&platform_driver);
-fail_platform_driver:
-	return ret;
  }
 
  module_init(alienware_wmi_init);
 
  static void __exit alienware_wmi_exit(void)
  {
-	remove_thermal_profile();
-	platform_device_unregister(platform_device);
-	platform_driver_unregister(&platform_driver);
+	if (interface == WMAX)
+		alienware_wmax_wmi_exit();
+	else
+		alienware_legacy_wmi_exit();
  }
 
  module_exit(alienware_wmi_exit);
author maintainer
#21 lore raw

Re: [PATCH 08/20] alienware-wmi: Add WMI Drivers

Quoted 16 lines · Armin Wolf

Am 21.12.24 um 06:59 schrieb Kurt Borja:

Quoted 8 lines

Add WMI drivers for LEGACY and WMAX devices.

This involves moving platform driver and device registration to a helper function, which is now called from the driver's preferred WMI device driver probe. However this is only done if !quirks->thermal because newer WMAX interface doesn't support any of the features exposed by this device.

Quoted 5 lines

Only one driver is registered on module initialization to prevent registering duplicate platform driver and device.

Aditionally, create_thermal_profile() now takes wmi_device * instead of platform_device *.

Quoted 7 lines

Since the HDMI, Amplifier and deepslp groups depend on the WMAX interface i would register them inside wmax_wmi_probe() using device_add_groups() (you might need to rework alienware_alienfx_setup() for that).

In the end the only code shared between both drivers should be related to the LED handling. Everything else AFAIK depends on the WMAX interface and should therefore be inside the WMAX driver.

Unfortunately this breaks old user-space interface, as the path to this attributes would change :(. This is why I can't even set a parent dev for the platform_device.

I only know of one project which interefaces with this driver [1], and it does use the /sys/devices/platform/alienware-wmi path. Maybe I could send a pull req, but it would still break old unknown projects and scripts.

[1] https://crates.io/crates/alienware

Quoted 264 lines

Thanks,
Armin Wolf

Quoted 260 lines
---
  drivers/platform/x86/dell/alienware-wmi.c | 186 +++++++++++++++++-----
  1 file changed, 146 insertions(+), 40 deletions(-)
drivers/platform/x86/dell/alienware-wmi.c +146 -40
index 4b68d64bd742..f2f6842e27e6 100644
@@ -15,6 +15,7 @@
  #include <linux/platform_profile.h>
  #include <linux/dmi.h>
  #include <linux/leds.h>
+#include <linux/wmi.h>
 
  #define LEGACY_CONTROL_GUID		"A90597CE-A997-11DA-B012-B622A1EF5492"
  #define LEGACY_POWER_CONTROL_GUID	"A80593CE-A997-11DA-B012-B622A1EF5492"
@@ -39,8 +40,6 @@
  MODULE_AUTHOR("Mario Limonciello <[email protected]>");
  MODULE_DESCRIPTION("Alienware special feature control");
  MODULE_LICENSE("GPL");
-MODULE_ALIAS("wmi:" LEGACY_CONTROL_GUID);
-MODULE_ALIAS("wmi:" WMAX_CONTROL_GUID);
 
  static bool force_platform_profile;
  module_param_unsafe(force_platform_profile, bool, 0);
@@ -412,7 +411,10 @@ struct alienfx_priv {
  	u8 lighting_control_state;
  };
 
-static struct platform_device *platform_device;
+struct alienfx_platdata {
+	struct wmi_device *wdev;
+};
+
  static struct platform_profile_handler pp_handler;
  static enum wmax_thermal_mode supported_thermal_profiles[PLATFORM_PROFILE_LAST];
 
@@ -1048,7 +1050,7 @@ static int thermal_profile_set(struct platform_profile_handler *pprof,
  	return wmax_thermal_control(supported_thermal_profiles[profile]);
  }
 
-static int create_thermal_profile(struct platform_device *platform_device)
+static int create_thermal_profile(struct wmi_device *wdev)
  {
  	enum platform_profile_option profile;
  	enum wmax_thermal_mode mode;
@@ -1097,7 +1099,7 @@ static int create_thermal_profile(struct platform_device *platform_device)
  	pp_handler.profile_get = thermal_profile_get;
  	pp_handler.profile_set = thermal_profile_set;
  	pp_handler.name = "alienware-wmi";
-	pp_handler.dev = &platform_device->dev;
+	pp_handler.dev = &wdev->dev;
 
  	return platform_profile_register(&pp_handler);
  }
@@ -1153,19 +1155,138 @@ static struct platform_driver platform_driver = {
  	.probe = alienfx_probe,
  };
 
-static int __init alienware_wmi_init(void)
+static int alienware_alienfx_setup(struct alienfx_platdata *pdata)
  {
+	struct platform_device *pdev;
  	int ret;
 
-	if (wmi_has_guid(LEGACY_CONTROL_GUID))
-		interface = LEGACY;
-	else if (wmi_has_guid(WMAX_CONTROL_GUID))
-		interface = WMAX;
-	else {
-		pr_warn("alienware-wmi: No known WMI GUID found\n");
-		return -ENODEV;
+	ret = platform_driver_register(&platform_driver);
+	if (ret < 0)
+		return ret;
+
+	pdev = platform_device_register_data(NULL, "alienware-wmi",
+					     PLATFORM_DEVID_NONE, pdata,
+					     sizeof(*pdata));
+
+	if (IS_ERR(pdev)) {
+		platform_driver_unregister(&platform_driver);
+		return PTR_ERR(pdev);
  	}
 
+	dev_set_drvdata(&pdata->wdev->dev, pdev);
+
+	return 0;
+}
+
+static void alienware_alienfx_exit(struct wmi_device *wdev)
+{
+	struct platform_device *pdev;
+
+	pdev = dev_get_drvdata(&wdev->dev);
+
+	platform_device_unregister(pdev);
+	platform_driver_unregister(&platform_driver);
+}
+
+/*
+ * Legacy WMI driver
+ */
+static int legacy_wmi_probe(struct wmi_device *wdev, const void *context)
+{
+	struct alienfx_platdata pdata = {
+		.wdev = wdev,
+	};
+
+	return alienware_alienfx_setup(&pdata);
+}
+
+static void legacy_wmi_remove(struct wmi_device *wdev)
+{
+	alienware_alienfx_exit(wdev);
+}
+
+static struct wmi_device_id alienware_legacy_device_id_table[] = {
+	{ LEGACY_CONTROL_GUID, NULL },
+	{ },
+};
+MODULE_DEVICE_TABLE(wmi, alienware_legacy_device_id_table);
+
+static struct wmi_driver alienware_legacy_wmi_driver = {
+	.driver = {
+		.name = "alienware-wmi-alienfx",
+		.probe_type = PROBE_PREFER_ASYNCHRONOUS,
+	},
+	.id_table = alienware_legacy_device_id_table,
+	.probe = legacy_wmi_probe,
+	.remove = legacy_wmi_remove,
+};
+
+static int __init alienware_legacy_wmi_init(void)
+{
+	return wmi_driver_register(&alienware_legacy_wmi_driver);
+}
+
+static void __exit alienware_legacy_wmi_exit(void)
+{
+	wmi_driver_unregister(&alienware_legacy_wmi_driver);
+}
+
+/*
+ * WMAX WMI driver
+ */
+static int wmax_wmi_probe(struct wmi_device *wdev, const void *context)
+{
+	struct alienfx_platdata pdata = {
+		.wdev = wdev,
+	};
+	int ret = 0;
+
+	if (quirks->thermal)
+		ret = create_thermal_profile(wdev);
+	else
+		ret = alienware_alienfx_setup(&pdata);
+
+	return ret;
+}
+
+static void wmax_wmi_remove(struct wmi_device *wdev)
+{
+	if (quirks->thermal)
+		remove_thermal_profile();
+	else
+		alienware_alienfx_exit(wdev);
+}
+
+static struct wmi_device_id alienware_wmax_device_id_table[] = {
+	{ WMAX_CONTROL_GUID, NULL },
+	{ },
+};
+MODULE_DEVICE_TABLE(wmi, alienware_wmax_device_id_table);
+
+static struct wmi_driver alienware_wmax_wmi_driver = {
+	.driver = {
+		.name = "alienware-wmi-wmax",
+		.probe_type = PROBE_PREFER_ASYNCHRONOUS,
+	},
+	.id_table = alienware_wmax_device_id_table,
+	.probe = wmax_wmi_probe,
+	.remove = wmax_wmi_remove,
+};
+
+static int __init alienware_wmax_wmi_init(void)
+{
+	return wmi_driver_register(&alienware_wmax_wmi_driver);
+}
+
+static void __exit alienware_wmax_wmi_exit(void)
+{
+	wmi_driver_unregister(&alienware_wmax_wmi_driver);
+}
+
+static int __init alienware_wmi_init(void)
+{
+	int ret;
+
  	dmi_check_system(alienware_quirks);
  	if (quirks == NULL)
  		quirks = &quirk_unknown;
@@ -1180,43 +1301,28 @@ static int __init alienware_wmi_init(void)
  			pr_warn("force_gmode requires platform profile support\n");
  	}
 
-	ret = platform_driver_register(&platform_driver);
-	if (ret)
-		goto fail_platform_driver;
-	platform_device = platform_device_alloc("alienware-wmi", PLATFORM_DEVID_NONE);
-	if (!platform_device) {
-		ret = -ENOMEM;
-		goto fail_platform_device1;
+	if (wmi_has_guid(WMAX_CONTROL_GUID)) {
+		interface = WMAX;
+		ret = alienware_wmax_wmi_init();
+	} else {
+		interface = LEGACY;
+		ret = alienware_legacy_wmi_init();
  	}
-	ret = platform_device_add(platform_device);
-	if (ret)
-		goto fail_platform_device2;
 
-	if (quirks->thermal) {
-		ret = create_thermal_profile(platform_device);
-		if (ret)
-			goto fail_prep_thermal_profile;
-	}
+	if (ret < 0)
+		return ret;
 
  	return 0;
-
-fail_prep_thermal_profile:
-	platform_device_del(platform_device);
-fail_platform_device2:
-	platform_device_put(platform_device);
-fail_platform_device1:
-	platform_driver_unregister(&platform_driver);
-fail_platform_driver:
-	return ret;
  }
 
  module_init(alienware_wmi_init);
 
  static void __exit alienware_wmi_exit(void)
  {
-	remove_thermal_profile();
-	platform_device_unregister(platform_device);
-	platform_driver_unregister(&platform_driver);
+	if (interface == WMAX)
+		alienware_wmax_wmi_exit();
+	else
+		alienware_legacy_wmi_exit();
  }
 
  module_exit(alienware_wmi_exit);
author maintainer
#22 lore raw

Re: [PATCH 08/20] alienware-wmi: Add WMI Drivers

Quoted 29 lines · Kurt Borja
Quoted 16 lines · Armin Wolf

Am 21.12.24 um 06:59 schrieb Kurt Borja:

Quoted 8 lines

Add WMI drivers for LEGACY and WMAX devices.

This involves moving platform driver and device registration to a helper function, which is now called from the driver's preferred WMI device driver probe. However this is only done if !quirks->thermal because newer WMAX interface doesn't support any of the features exposed by this device.

Quoted 5 lines

Only one driver is registered on module initialization to prevent registering duplicate platform driver and device.

Aditionally, create_thermal_profile() now takes wmi_device * instead of platform_device *.

Quoted 7 lines

Since the HDMI, Amplifier and deepslp groups depend on the WMAX interface i would register them inside wmax_wmi_probe() using device_add_groups() (you might need to rework alienware_alienfx_setup() for that).

In the end the only code shared between both drivers should be related to the LED handling. Everything else AFAIK depends on the WMAX interface and should therefore be inside the WMAX driver.

Unfortunately this breaks old user-space interface, as the path to this attributes would change :(. This is why I can't even set a parent dev for the platform_device.

Quoted 6 lines

I only know of one project which interefaces with this driver [1], and it does use the /sys/devices/platform/alienware-wmi path. Maybe I could send a pull req, but it would still break old unknown projects and scripts.

[1] https://crates.io/crates/alienware

Nevermind this, I thought you said .dev_groups xd. I will do this on v2.

Quoted 265 lines
Quoted 265 lines

Thanks,
Armin Wolf

Quoted 260 lines
---
  drivers/platform/x86/dell/alienware-wmi.c | 186 +++++++++++++++++-----
  1 file changed, 146 insertions(+), 40 deletions(-)
drivers/platform/x86/dell/alienware-wmi.c +146 -40
index 4b68d64bd742..f2f6842e27e6 100644
@@ -15,6 +15,7 @@
  #include <linux/platform_profile.h>
  #include <linux/dmi.h>
  #include <linux/leds.h>
+#include <linux/wmi.h>
 
  #define LEGACY_CONTROL_GUID		"A90597CE-A997-11DA-B012-B622A1EF5492"
  #define LEGACY_POWER_CONTROL_GUID	"A80593CE-A997-11DA-B012-B622A1EF5492"
@@ -39,8 +40,6 @@
  MODULE_AUTHOR("Mario Limonciello <[email protected]>");
  MODULE_DESCRIPTION("Alienware special feature control");
  MODULE_LICENSE("GPL");
-MODULE_ALIAS("wmi:" LEGACY_CONTROL_GUID);
-MODULE_ALIAS("wmi:" WMAX_CONTROL_GUID);
 
  static bool force_platform_profile;
  module_param_unsafe(force_platform_profile, bool, 0);
@@ -412,7 +411,10 @@ struct alienfx_priv {
  	u8 lighting_control_state;
  };
 
-static struct platform_device *platform_device;
+struct alienfx_platdata {
+	struct wmi_device *wdev;
+};
+
  static struct platform_profile_handler pp_handler;
  static enum wmax_thermal_mode supported_thermal_profiles[PLATFORM_PROFILE_LAST];
 
@@ -1048,7 +1050,7 @@ static int thermal_profile_set(struct platform_profile_handler *pprof,
  	return wmax_thermal_control(supported_thermal_profiles[profile]);
  }
 
-static int create_thermal_profile(struct platform_device *platform_device)
+static int create_thermal_profile(struct wmi_device *wdev)
  {
  	enum platform_profile_option profile;
  	enum wmax_thermal_mode mode;
@@ -1097,7 +1099,7 @@ static int create_thermal_profile(struct platform_device *platform_device)
  	pp_handler.profile_get = thermal_profile_get;
  	pp_handler.profile_set = thermal_profile_set;
  	pp_handler.name = "alienware-wmi";
-	pp_handler.dev = &platform_device->dev;
+	pp_handler.dev = &wdev->dev;
 
  	return platform_profile_register(&pp_handler);
  }
@@ -1153,19 +1155,138 @@ static struct platform_driver platform_driver = {
  	.probe = alienfx_probe,
  };
 
-static int __init alienware_wmi_init(void)
+static int alienware_alienfx_setup(struct alienfx_platdata *pdata)
  {
+	struct platform_device *pdev;
  	int ret;
 
-	if (wmi_has_guid(LEGACY_CONTROL_GUID))
-		interface = LEGACY;
-	else if (wmi_has_guid(WMAX_CONTROL_GUID))
-		interface = WMAX;
-	else {
-		pr_warn("alienware-wmi: No known WMI GUID found\n");
-		return -ENODEV;
+	ret = platform_driver_register(&platform_driver);
+	if (ret < 0)
+		return ret;
+
+	pdev = platform_device_register_data(NULL, "alienware-wmi",
+					     PLATFORM_DEVID_NONE, pdata,
+					     sizeof(*pdata));
+
+	if (IS_ERR(pdev)) {
+		platform_driver_unregister(&platform_driver);
+		return PTR_ERR(pdev);
  	}
 
+	dev_set_drvdata(&pdata->wdev->dev, pdev);
+
+	return 0;
+}
+
+static void alienware_alienfx_exit(struct wmi_device *wdev)
+{
+	struct platform_device *pdev;
+
+	pdev = dev_get_drvdata(&wdev->dev);
+
+	platform_device_unregister(pdev);
+	platform_driver_unregister(&platform_driver);
+}
+
+/*
+ * Legacy WMI driver
+ */
+static int legacy_wmi_probe(struct wmi_device *wdev, const void *context)
+{
+	struct alienfx_platdata pdata = {
+		.wdev = wdev,
+	};
+
+	return alienware_alienfx_setup(&pdata);
+}
+
+static void legacy_wmi_remove(struct wmi_device *wdev)
+{
+	alienware_alienfx_exit(wdev);
+}
+
+static struct wmi_device_id alienware_legacy_device_id_table[] = {
+	{ LEGACY_CONTROL_GUID, NULL },
+	{ },
+};
+MODULE_DEVICE_TABLE(wmi, alienware_legacy_device_id_table);
+
+static struct wmi_driver alienware_legacy_wmi_driver = {
+	.driver = {
+		.name = "alienware-wmi-alienfx",
+		.probe_type = PROBE_PREFER_ASYNCHRONOUS,
+	},
+	.id_table = alienware_legacy_device_id_table,
+	.probe = legacy_wmi_probe,
+	.remove = legacy_wmi_remove,
+};
+
+static int __init alienware_legacy_wmi_init(void)
+{
+	return wmi_driver_register(&alienware_legacy_wmi_driver);
+}
+
+static void __exit alienware_legacy_wmi_exit(void)
+{
+	wmi_driver_unregister(&alienware_legacy_wmi_driver);
+}
+
+/*
+ * WMAX WMI driver
+ */
+static int wmax_wmi_probe(struct wmi_device *wdev, const void *context)
+{
+	struct alienfx_platdata pdata = {
+		.wdev = wdev,
+	};
+	int ret = 0;
+
+	if (quirks->thermal)
+		ret = create_thermal_profile(wdev);
+	else
+		ret = alienware_alienfx_setup(&pdata);
+
+	return ret;
+}
+
+static void wmax_wmi_remove(struct wmi_device *wdev)
+{
+	if (quirks->thermal)
+		remove_thermal_profile();
+	else
+		alienware_alienfx_exit(wdev);
+}
+
+static struct wmi_device_id alienware_wmax_device_id_table[] = {
+	{ WMAX_CONTROL_GUID, NULL },
+	{ },
+};
+MODULE_DEVICE_TABLE(wmi, alienware_wmax_device_id_table);
+
+static struct wmi_driver alienware_wmax_wmi_driver = {
+	.driver = {
+		.name = "alienware-wmi-wmax",
+		.probe_type = PROBE_PREFER_ASYNCHRONOUS,
+	},
+	.id_table = alienware_wmax_device_id_table,
+	.probe = wmax_wmi_probe,
+	.remove = wmax_wmi_remove,
+};
+
+static int __init alienware_wmax_wmi_init(void)
+{
+	return wmi_driver_register(&alienware_wmax_wmi_driver);
+}
+
+static void __exit alienware_wmax_wmi_exit(void)
+{
+	wmi_driver_unregister(&alienware_wmax_wmi_driver);
+}
+
+static int __init alienware_wmi_init(void)
+{
+	int ret;
+
  	dmi_check_system(alienware_quirks);
  	if (quirks == NULL)
  		quirks = &quirk_unknown;
@@ -1180,43 +1301,28 @@ static int __init alienware_wmi_init(void)
  			pr_warn("force_gmode requires platform profile support\n");
  	}
 
-	ret = platform_driver_register(&platform_driver);
-	if (ret)
-		goto fail_platform_driver;
-	platform_device = platform_device_alloc("alienware-wmi", PLATFORM_DEVID_NONE);
-	if (!platform_device) {
-		ret = -ENOMEM;
-		goto fail_platform_device1;
+	if (wmi_has_guid(WMAX_CONTROL_GUID)) {
+		interface = WMAX;
+		ret = alienware_wmax_wmi_init();
+	} else {
+		interface = LEGACY;
+		ret = alienware_legacy_wmi_init();
  	}
-	ret = platform_device_add(platform_device);
-	if (ret)
-		goto fail_platform_device2;
 
-	if (quirks->thermal) {
-		ret = create_thermal_profile(platform_device);
-		if (ret)
-			goto fail_prep_thermal_profile;
-	}
+	if (ret < 0)
+		return ret;
 
  	return 0;
-
-fail_prep_thermal_profile:
-	platform_device_del(platform_device);
-fail_platform_device2:
-	platform_device_put(platform_device);
-fail_platform_device1:
-	platform_driver_unregister(&platform_driver);
-fail_platform_driver:
-	return ret;
  }
 
  module_init(alienware_wmi_init);
 
  static void __exit alienware_wmi_exit(void)
  {
-	remove_thermal_profile();
-	platform_device_unregister(platform_device);
-	platform_driver_unregister(&platform_driver);
+	if (interface == WMAX)
+		alienware_wmax_wmi_exit();
+	else
+		alienware_legacy_wmi_exit();
  }
 
  module_exit(alienware_wmi_exit);
#23 lore raw

Re: [PATCH 08/20] alienware-wmi: Add WMI Drivers

In reply to Kurt Borja

Am 27.12.24 um 05:44 schrieb Kurt Borja:

Quoted 27 lines · Armin Wolf
Quoted 15 lines

Am 21.12.24 um 06:59 schrieb Kurt Borja:

Quoted 8 lines

Add WMI drivers for LEGACY and WMAX devices.

This involves moving platform driver and device registration to a helper function, which is now called from the driver's preferred WMI device driver probe. However this is only done if !quirks->thermal because newer WMAX interface doesn't support any of the features exposed by this device.

Quoted 5 lines

Only one driver is registered on module initialization to prevent registering duplicate platform driver and device.

Aditionally, create_thermal_profile() now takes wmi_device * instead of platform_device *.

Quoted 7 lines

Since the HDMI, Amplifier and deepslp groups depend on the WMAX interface i would register them inside wmax_wmi_probe() using device_add_groups() (you might need to rework alienware_alienfx_setup() for that).

In the end the only code shared between both drivers should be related to the LED handling. Everything else AFAIK depends on the WMAX interface and should therefore be inside the WMAX driver.

Unfortunately this breaks old user-space interface, as the path to this attributes would change :(. This is why I can't even set a parent dev for the platform_device.

Quoted 6 lines

I only know of one project which interefaces with this driver [1], and it does use the /sys/devices/platform/alienware-wmi path. Maybe I could send a pull req, but it would still break old unknown projects and scripts.

[1] https://crates.io/crates/alienware

I meant that you use device_add_groups() on the platform device, not on the WMI device itself. Since alienware_alienfx_setup() stores a pointer to the platform device using dev_set_drvdata() the WMI driver can use dev_get_drvdata() to access the platform device.

Thanks,
Armin Wolf

Quoted 262 lines
Quoted 262 lines

Thanks,
Armin Wolf

Quoted 259 lines
---
   drivers/platform/x86/dell/alienware-wmi.c | 186 +++++++++++++++++-----
   1 file changed, 146 insertions(+), 40 deletions(-)
drivers/platform/x86/dell/alienware-wmi.c +146 -40
index 4b68d64bd742..f2f6842e27e6 100644
@@ -15,6 +15,7 @@
   #include <linux/platform_profile.h>
   #include <linux/dmi.h>
   #include <linux/leds.h>
+#include <linux/wmi.h>
 
   #define LEGACY_CONTROL_GUID		"A90597CE-A997-11DA-B012-B622A1EF5492"
   #define LEGACY_POWER_CONTROL_GUID	"A80593CE-A997-11DA-B012-B622A1EF5492"
@@ -39,8 +40,6 @@
   MODULE_AUTHOR("Mario Limonciello <[email protected]>");
   MODULE_DESCRIPTION("Alienware special feature control");
   MODULE_LICENSE("GPL");
-MODULE_ALIAS("wmi:" LEGACY_CONTROL_GUID);
-MODULE_ALIAS("wmi:" WMAX_CONTROL_GUID);
 
   static bool force_platform_profile;
   module_param_unsafe(force_platform_profile, bool, 0);
@@ -412,7 +411,10 @@ struct alienfx_priv {
   	u8 lighting_control_state;
   };
 
-static struct platform_device *platform_device;
+struct alienfx_platdata {
+	struct wmi_device *wdev;
+};
+
   static struct platform_profile_handler pp_handler;
   static enum wmax_thermal_mode supported_thermal_profiles[PLATFORM_PROFILE_LAST];
 
@@ -1048,7 +1050,7 @@ static int thermal_profile_set(struct platform_profile_handler *pprof,
   	return wmax_thermal_control(supported_thermal_profiles[profile]);
   }
 
-static int create_thermal_profile(struct platform_device *platform_device)
+static int create_thermal_profile(struct wmi_device *wdev)
   {
   	enum platform_profile_option profile;
   	enum wmax_thermal_mode mode;
@@ -1097,7 +1099,7 @@ static int create_thermal_profile(struct platform_device *platform_device)
   	pp_handler.profile_get = thermal_profile_get;
   	pp_handler.profile_set = thermal_profile_set;
   	pp_handler.name = "alienware-wmi";
-	pp_handler.dev = &platform_device->dev;
+	pp_handler.dev = &wdev->dev;
 
   	return platform_profile_register(&pp_handler);
   }
@@ -1153,19 +1155,138 @@ static struct platform_driver platform_driver = {
   	.probe = alienfx_probe,
   };
 
-static int __init alienware_wmi_init(void)
+static int alienware_alienfx_setup(struct alienfx_platdata *pdata)
   {
+	struct platform_device *pdev;
   	int ret;
 
-	if (wmi_has_guid(LEGACY_CONTROL_GUID))
-		interface = LEGACY;
-	else if (wmi_has_guid(WMAX_CONTROL_GUID))
-		interface = WMAX;
-	else {
-		pr_warn("alienware-wmi: No known WMI GUID found\n");
-		return -ENODEV;
+	ret = platform_driver_register(&platform_driver);
+	if (ret < 0)
+		return ret;
+
+	pdev = platform_device_register_data(NULL, "alienware-wmi",
+					     PLATFORM_DEVID_NONE, pdata,
+					     sizeof(*pdata));
+
+	if (IS_ERR(pdev)) {
+		platform_driver_unregister(&platform_driver);
+		return PTR_ERR(pdev);
   	}
 
+	dev_set_drvdata(&pdata->wdev->dev, pdev);
+
+	return 0;
+}
+
+static void alienware_alienfx_exit(struct wmi_device *wdev)
+{
+	struct platform_device *pdev;
+
+	pdev = dev_get_drvdata(&wdev->dev);
+
+	platform_device_unregister(pdev);
+	platform_driver_unregister(&platform_driver);
+}
+
+/*
+ * Legacy WMI driver
+ */
+static int legacy_wmi_probe(struct wmi_device *wdev, const void *context)
+{
+	struct alienfx_platdata pdata = {
+		.wdev = wdev,
+	};
+
+	return alienware_alienfx_setup(&pdata);
+}
+
+static void legacy_wmi_remove(struct wmi_device *wdev)
+{
+	alienware_alienfx_exit(wdev);
+}
+
+static struct wmi_device_id alienware_legacy_device_id_table[] = {
+	{ LEGACY_CONTROL_GUID, NULL },
+	{ },
+};
+MODULE_DEVICE_TABLE(wmi, alienware_legacy_device_id_table);
+
+static struct wmi_driver alienware_legacy_wmi_driver = {
+	.driver = {
+		.name = "alienware-wmi-alienfx",
+		.probe_type = PROBE_PREFER_ASYNCHRONOUS,
+	},
+	.id_table = alienware_legacy_device_id_table,
+	.probe = legacy_wmi_probe,
+	.remove = legacy_wmi_remove,
+};
+
+static int __init alienware_legacy_wmi_init(void)
+{
+	return wmi_driver_register(&alienware_legacy_wmi_driver);
+}
+
+static void __exit alienware_legacy_wmi_exit(void)
+{
+	wmi_driver_unregister(&alienware_legacy_wmi_driver);
+}
+
+/*
+ * WMAX WMI driver
+ */
+static int wmax_wmi_probe(struct wmi_device *wdev, const void *context)
+{
+	struct alienfx_platdata pdata = {
+		.wdev = wdev,
+	};
+	int ret = 0;
+
+	if (quirks->thermal)
+		ret = create_thermal_profile(wdev);
+	else
+		ret = alienware_alienfx_setup(&pdata);
+
+	return ret;
+}
+
+static void wmax_wmi_remove(struct wmi_device *wdev)
+{
+	if (quirks->thermal)
+		remove_thermal_profile();
+	else
+		alienware_alienfx_exit(wdev);
+}
+
+static struct wmi_device_id alienware_wmax_device_id_table[] = {
+	{ WMAX_CONTROL_GUID, NULL },
+	{ },
+};
+MODULE_DEVICE_TABLE(wmi, alienware_wmax_device_id_table);
+
+static struct wmi_driver alienware_wmax_wmi_driver = {
+	.driver = {
+		.name = "alienware-wmi-wmax",
+		.probe_type = PROBE_PREFER_ASYNCHRONOUS,
+	},
+	.id_table = alienware_wmax_device_id_table,
+	.probe = wmax_wmi_probe,
+	.remove = wmax_wmi_remove,
+};
+
+static int __init alienware_wmax_wmi_init(void)
+{
+	return wmi_driver_register(&alienware_wmax_wmi_driver);
+}
+
+static void __exit alienware_wmax_wmi_exit(void)
+{
+	wmi_driver_unregister(&alienware_wmax_wmi_driver);
+}
+
+static int __init alienware_wmi_init(void)
+{
+	int ret;
+
   	dmi_check_system(alienware_quirks);
   	if (quirks == NULL)
   		quirks = &quirk_unknown;
@@ -1180,43 +1301,28 @@ static int __init alienware_wmi_init(void)
   			pr_warn("force_gmode requires platform profile support\n");
   	}
 
-	ret = platform_driver_register(&platform_driver);
-	if (ret)
-		goto fail_platform_driver;
-	platform_device = platform_device_alloc("alienware-wmi", PLATFORM_DEVID_NONE);
-	if (!platform_device) {
-		ret = -ENOMEM;
-		goto fail_platform_device1;
+	if (wmi_has_guid(WMAX_CONTROL_GUID)) {
+		interface = WMAX;
+		ret = alienware_wmax_wmi_init();
+	} else {
+		interface = LEGACY;
+		ret = alienware_legacy_wmi_init();
   	}
-	ret = platform_device_add(platform_device);
-	if (ret)
-		goto fail_platform_device2;
 
-	if (quirks->thermal) {
-		ret = create_thermal_profile(platform_device);
-		if (ret)
-			goto fail_prep_thermal_profile;
-	}
+	if (ret < 0)
+		return ret;
 
   	return 0;
-
-fail_prep_thermal_profile:
-	platform_device_del(platform_device);
-fail_platform_device2:
-	platform_device_put(platform_device);
-fail_platform_device1:
-	platform_driver_unregister(&platform_driver);
-fail_platform_driver:
-	return ret;
   }
 
   module_init(alienware_wmi_init);
 
   static void __exit alienware_wmi_exit(void)
   {
-	remove_thermal_profile();
-	platform_device_unregister(platform_device);
-	platform_driver_unregister(&platform_driver);
+	if (interface == WMAX)
+		alienware_wmax_wmi_exit();
+	else
+		alienware_legacy_wmi_exit();
   }
 
   module_exit(alienware_wmi_exit);
author maintainer
#24 lore raw

PATCH 9/20 alienware-wmi: Add a state container for thermal control methods

In reply to Kurt Borja

Refactor all thermal control methods to use the newly defined awcc_priv state container instead of global variables.

---
 drivers/platform/x86/dell/alienware-wmi.c | 71 +++++++++++++++++------
 1 file changed, 52 insertions(+), 19 deletions(-)
drivers/platform/x86/dell/alienware-wmi.c +52 -19
index f2f6842e27e6..c4ca141d628e 100644
@@ -403,6 +403,12 @@ struct wmax_u32_args {
 	u8 arg3;
 };
 
+struct awcc_priv {
+	struct wmi_device *wdev;
+	struct platform_profile_handler pp_handler;
+	enum wmax_thermal_mode supported_thermal_profiles[PLATFORM_PROFILE_LAST];
+};
+
 struct alienfx_priv {
 	struct platform_device *pdev;
 	struct led_classdev global_led;
@@ -415,9 +421,6 @@ struct alienfx_platdata {
 	struct wmi_device *wdev;
 };
 
-static struct platform_profile_handler pp_handler;
-static enum wmax_thermal_mode supported_thermal_profiles[PLATFORM_PROFILE_LAST];
-
 static u8 interface;
 
 /*
@@ -1027,6 +1030,10 @@ static int thermal_profile_get(struct platform_profile_handler *pprof,
 static int thermal_profile_set(struct platform_profile_handler *pprof,
 			       enum platform_profile_option profile)
 {
+	struct awcc_priv *priv;
+
+	priv = container_of(pprof, struct awcc_priv, pp_handler);
+
 	if (quirks->gmode) {
 		u32 gmode_status;
 		int ret;
@@ -1047,18 +1054,21 @@ static int thermal_profile_set(struct platform_profile_handler *pprof,
 		}
 	}
 
-	return wmax_thermal_control(supported_thermal_profiles[profile]);
+	return wmax_thermal_control(priv->supported_thermal_profiles[profile]);
 }
 
 static int create_thermal_profile(struct wmi_device *wdev)
 {
 	enum platform_profile_option profile;
 	enum wmax_thermal_mode mode;
+	struct awcc_priv *priv;
 	u8 sys_desc[4];
 	u32 first_mode;
 	u32 out_data;
 	int ret;
 
+	priv = dev_get_drvdata(&wdev->dev);
+
 	ret = wmax_thermal_information(WMAX_OPERATION_SYS_DESCRIPTION,
 				       0, (u32 *) &sys_desc);
 	if (ret < 0)
@@ -1081,33 +1091,56 @@ static int create_thermal_profile(struct wmi_device *wdev)
 
 		mode = out_data & WMAX_THERMAL_MODE_MASK;
 		profile = wmax_mode_to_platform_profile[mode];
-		supported_thermal_profiles[profile] = out_data;
+		priv->supported_thermal_profiles[profile] = out_data;
 
-		set_bit(profile, pp_handler.choices);
+		set_bit(profile, priv->pp_handler.choices);
 	}
 
-	if (bitmap_empty(pp_handler.choices, PLATFORM_PROFILE_LAST))
+	if (bitmap_empty(priv->pp_handler.choices, PLATFORM_PROFILE_LAST))
 		return -ENODEV;
 
 	if (quirks->gmode) {
-		supported_thermal_profiles[PLATFORM_PROFILE_PERFORMANCE] =
+		priv->supported_thermal_profiles[PLATFORM_PROFILE_PERFORMANCE] =
 			WMAX_THERMAL_MODE_GMODE;
 
-		set_bit(PLATFORM_PROFILE_PERFORMANCE, pp_handler.choices);
+		set_bit(PLATFORM_PROFILE_PERFORMANCE, priv->pp_handler.choices);
 	}
 
-	pp_handler.profile_get = thermal_profile_get;
-	pp_handler.profile_set = thermal_profile_set;
-	pp_handler.name = "alienware-wmi";
-	pp_handler.dev = &wdev->dev;
+	priv->pp_handler.profile_get = thermal_profile_get;
+	priv->pp_handler.profile_set = thermal_profile_set;
+	priv->pp_handler.name = "alienware-wmi";
+	priv->pp_handler.dev = &wdev->dev;
 
-	return platform_profile_register(&pp_handler);
+	return platform_profile_register(&priv->pp_handler);
 }
 
-static void remove_thermal_profile(void)
+static int alienware_awcc_setup(struct wmi_device *wdev)
 {
-	if (quirks->thermal)
-		platform_profile_remove(&pp_handler);
+	struct awcc_priv *priv;
+	int ret;
+
+	priv = devm_kzalloc(&wdev->dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	dev_set_drvdata(&wdev->dev, priv);
+
+	priv->wdev = wdev;
+
+	ret = create_thermal_profile(wdev);
+	if (ret < 0)
+		return ret;
+
+	return 0;
+}
+
+static void alienware_awcc_exit(struct wmi_device *wdev)
+{
+	struct awcc_priv *priv;
+
+	priv = dev_get_drvdata(&wdev->dev);
+
+	platform_profile_remove(&priv->pp_handler);
 }
 
 /*
@@ -1242,7 +1275,7 @@ static int wmax_wmi_probe(struct wmi_device *wdev, const void *context)
 	int ret = 0;
 
 	if (quirks->thermal)
-		ret = create_thermal_profile(wdev);
+		ret = alienware_awcc_setup(wdev);
 	else
 		ret = alienware_alienfx_setup(&pdata);
 
@@ -1252,7 +1285,7 @@ static int wmax_wmi_probe(struct wmi_device *wdev, const void *context)
 static void wmax_wmi_remove(struct wmi_device *wdev)
 {
 	if (quirks->thermal)
-		remove_thermal_profile();
+		alienware_awcc_exit(wdev);
 	else
 		alienware_alienfx_exit(wdev);
 }
Signature · 1 line
2.47.1
Reviewed-by on v1 9/20
#25 lore raw

Re: [PATCH 09/20] alienware-wmi: Add a state container for thermal control methods

Am 21.12.24 um 06:59 schrieb Kurt Borja:

Quoted 36 lines

Refactor all thermal control methods to use the newly defined awcc_priv state container instead of global variables.

---
  drivers/platform/x86/dell/alienware-wmi.c | 71 +++++++++++++++++------
  1 file changed, 52 insertions(+), 19 deletions(-)
drivers/platform/x86/dell/alienware-wmi.c +6 -3
index f2f6842e27e6..c4ca141d628e 100644
@@ -403,6 +403,12 @@ struct wmax_u32_args {
  	u8 arg3;
  };
 
+struct awcc_priv {
+	struct wmi_device *wdev;
+	struct platform_profile_handler pp_handler;
+	enum wmax_thermal_mode supported_thermal_profiles[PLATFORM_PROFILE_LAST];
+};
+
  struct alienfx_priv {
  	struct platform_device *pdev;
  	struct led_classdev global_led;
@@ -415,9 +421,6 @@ struct alienfx_platdata {
  	struct wmi_device *wdev;
  };
 
-static struct platform_profile_handler pp_handler;
-static enum wmax_thermal_mode supported_thermal_profiles[PLATFORM_PROFILE_LAST];
-
  static u8 interface;
 
  /*

drivers/platform/x86/dell/alienware-wmi.c static int thermal_profile_get(struct platform_profile_handler *pprof, · line 1035

Quoted 6 lines
drivers/platform/x86/dell/alienware-wmi.c +3 -0
@@ -1027,6 +1030,10 @@ static int thermal_profile_get(struct platform_profile_handler *pprof,
  static int thermal_profile_set(struct platform_profile_handler *pprof,
  			       enum platform_profile_option profile)
  {
+	struct awcc_priv *priv;
+
+	priv = container_of(pprof, struct awcc_priv, pp_handler);

Please merge those two statements.

Quoted 13 lines
drivers/platform/x86/dell/alienware-wmi.c +2 -1
+
  	if (quirks->gmode) {
  		u32 gmode_status;
  		int ret;
@@ -1047,18 +1054,21 @@ static int thermal_profile_set(struct platform_profile_handler *pprof,
  		}
  	}
 
-	return wmax_thermal_control(supported_thermal_profiles[profile]);
+	return wmax_thermal_control(priv->supported_thermal_profiles[profile]);
  }
 
  static int create_thermal_profile(struct wmi_device *wdev)

drivers/platform/x86/dell/alienware-wmi.c static int thermal_profile_set(struct platform_profile_handler *pprof, · line 1070

Quoted 10 lines
drivers/platform/x86/dell/alienware-wmi.c +2 -0
  {
  	enum platform_profile_option profile;
  	enum wmax_thermal_mode mode;
+	struct awcc_priv *priv;
  	u8 sys_desc[4];
  	u32 first_mode;
  	u32 out_data;
  	int ret;
 
+	priv = dev_get_drvdata(&wdev->dev);

Same as above.

Quoted 52 lines
drivers/platform/x86/dell/alienware-wmi.c +18 -13
+
  	ret = wmax_thermal_information(WMAX_OPERATION_SYS_DESCRIPTION,
  				       0, (u32 *) &sys_desc);
  	if (ret < 0)
@@ -1081,33 +1091,56 @@ static int create_thermal_profile(struct wmi_device *wdev)
 
  		mode = out_data & WMAX_THERMAL_MODE_MASK;
  		profile = wmax_mode_to_platform_profile[mode];
-		supported_thermal_profiles[profile] = out_data;
+		priv->supported_thermal_profiles[profile] = out_data;
 
-		set_bit(profile, pp_handler.choices);
+		set_bit(profile, priv->pp_handler.choices);
  	}
 
-	if (bitmap_empty(pp_handler.choices, PLATFORM_PROFILE_LAST))
+	if (bitmap_empty(priv->pp_handler.choices, PLATFORM_PROFILE_LAST))
  		return -ENODEV;
 
  	if (quirks->gmode) {
-		supported_thermal_profiles[PLATFORM_PROFILE_PERFORMANCE] =
+		priv->supported_thermal_profiles[PLATFORM_PROFILE_PERFORMANCE] =
  			WMAX_THERMAL_MODE_GMODE;
 
-		set_bit(PLATFORM_PROFILE_PERFORMANCE, pp_handler.choices);
+		set_bit(PLATFORM_PROFILE_PERFORMANCE, priv->pp_handler.choices);
  	}
 
-	pp_handler.profile_get = thermal_profile_get;
-	pp_handler.profile_set = thermal_profile_set;
-	pp_handler.name = "alienware-wmi";
-	pp_handler.dev = &wdev->dev;
+	priv->pp_handler.profile_get = thermal_profile_get;
+	priv->pp_handler.profile_set = thermal_profile_set;
+	priv->pp_handler.name = "alienware-wmi";
+	priv->pp_handler.dev = &wdev->dev;
 
-	return platform_profile_register(&pp_handler);
+	return platform_profile_register(&priv->pp_handler);
  }
 
-static void remove_thermal_profile(void)
+static int alienware_awcc_setup(struct wmi_device *wdev)
  {
-	if (quirks->thermal)
-		platform_profile_remove(&pp_handler);
+	struct awcc_priv *priv;
+	int ret;
+
+	priv = devm_kzalloc(&wdev->dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;

drivers/platform/x86/dell/alienware-wmi.c static int create_thermal_profile(struct wmi_device *wdev) · line 1134

Quoted 10 lines
drivers/platform/x86/dell/alienware-wmi.c +10 -0
+
+	dev_set_drvdata(&wdev->dev, priv);
+
+	priv->wdev = wdev;
+
+	ret = create_thermal_profile(wdev);
+	if (ret < 0)
+		return ret;
+
+	return 0;

Just directly return the result of create_thermal_profile() here.

With those minor issues being fixed:

drivers/platform/x86/dell/alienware-wmi.c static int create_thermal_profile(struct wmi_device *wdev) · line 1141

Quoted 7 lines
drivers/platform/x86/dell/alienware-wmi.c +7 -0
+}
+
+static void alienware_awcc_exit(struct wmi_device *wdev)
+{
+	struct awcc_priv *priv;
+
+	priv = dev_get_drvdata(&wdev->dev);

Please merge both statements.

Quoted 23 lines
drivers/platform/x86/dell/alienware-wmi.c +4 -2
+
+	platform_profile_remove(&priv->pp_handler);
  }
 
  /*
@@ -1242,7 +1275,7 @@ static int wmax_wmi_probe(struct wmi_device *wdev, const void *context)
  	int ret = 0;
 
  	if (quirks->thermal)
-		ret = create_thermal_profile(wdev);
+		ret = alienware_awcc_setup(wdev);
  	else
  		ret = alienware_alienfx_setup(&pdata);
 
@@ -1252,7 +1285,7 @@ static int wmax_wmi_probe(struct wmi_device *wdev, const void *context)
  static void wmax_wmi_remove(struct wmi_device *wdev)
  {
  	if (quirks->thermal)
-		remove_thermal_profile();
+		alienware_awcc_exit(wdev);
  	else
  		alienware_alienfx_exit(wdev);
  }
author maintainer
#26 lore raw

Re: [PATCH 09/20] alienware-wmi: Add a state container for thermal control methods

Quoted 36 lines · Armin Wolf

Am 21.12.24 um 06:59 schrieb Kurt Borja:

Quoted 34 lines

Refactor all thermal control methods to use the newly defined awcc_priv state container instead of global variables.

---
  drivers/platform/x86/dell/alienware-wmi.c | 71 +++++++++++++++++------
  1 file changed, 52 insertions(+), 19 deletions(-)
drivers/platform/x86/dell/alienware-wmi.c +6 -3
index f2f6842e27e6..c4ca141d628e 100644
@@ -403,6 +403,12 @@ struct wmax_u32_args {
  	u8 arg3;
  };
 
+struct awcc_priv {
+	struct wmi_device *wdev;
+	struct platform_profile_handler pp_handler;
+	enum wmax_thermal_mode supported_thermal_profiles[PLATFORM_PROFILE_LAST];
+};
+
  struct alienfx_priv {
  	struct platform_device *pdev;
  	struct led_classdev global_led;
@@ -415,9 +421,6 @@ struct alienfx_platdata {
  	struct wmi_device *wdev;
  };
 
-static struct platform_profile_handler pp_handler;
-static enum wmax_thermal_mode supported_thermal_profiles[PLATFORM_PROFILE_LAST];
-
  static u8 interface;
 
Quoted 10 lines

drivers/platform/x86/dell/alienware-wmi.c static int thermal_profile_get(struct platform_profile_handler *pprof, · line 1035

Quoted 8 lines
drivers/platform/x86/dell/alienware-wmi.c +3 -0
  /*
@@ -1027,6 +1030,10 @@ static int thermal_profile_get(struct platform_profile_handler *pprof,
  static int thermal_profile_set(struct platform_profile_handler *pprof,
  			       enum platform_profile_option profile)
  {
+	struct awcc_priv *priv;
+
+	priv = container_of(pprof, struct awcc_priv, pp_handler);

Please merge those two statements.

Ack.

Quoted 23 lines
Quoted 23 lines
drivers/platform/x86/dell/alienware-wmi.c +3 -1
+
  	if (quirks->gmode) {
  		u32 gmode_status;
  		int ret;
@@ -1047,18 +1054,21 @@ static int thermal_profile_set(struct platform_profile_handler *pprof,
  		}
  	}
 
-	return wmax_thermal_control(supported_thermal_profiles[profile]);
+	return wmax_thermal_control(priv->supported_thermal_profiles[profile]);
  }
 
  static int create_thermal_profile(struct wmi_device *wdev)
  {
  	enum platform_profile_option profile;
  	enum wmax_thermal_mode mode;
+	struct awcc_priv *priv;
  	u8 sys_desc[4];
  	u32 first_mode;
  	u32 out_data;
  	int ret;
 
Quoted 3 lines

drivers/platform/x86/dell/alienware-wmi.c static int thermal_profile_set(struct platform_profile_handler *pprof, · line 1070

Quoted 1 line
drivers/platform/x86/dell/alienware-wmi.c +1 -0
+	priv = dev_get_drvdata(&wdev->dev);

Same as above.

Ack.

Quoted 57 lines
Quoted 57 lines
drivers/platform/x86/dell/alienware-wmi.c +22 -13
+
  	ret = wmax_thermal_information(WMAX_OPERATION_SYS_DESCRIPTION,
  				       0, (u32 *) &sys_desc);
  	if (ret < 0)
@@ -1081,33 +1091,56 @@ static int create_thermal_profile(struct wmi_device *wdev)
 
  		mode = out_data & WMAX_THERMAL_MODE_MASK;
  		profile = wmax_mode_to_platform_profile[mode];
-		supported_thermal_profiles[profile] = out_data;
+		priv->supported_thermal_profiles[profile] = out_data;
 
-		set_bit(profile, pp_handler.choices);
+		set_bit(profile, priv->pp_handler.choices);
  	}
 
-	if (bitmap_empty(pp_handler.choices, PLATFORM_PROFILE_LAST))
+	if (bitmap_empty(priv->pp_handler.choices, PLATFORM_PROFILE_LAST))
  		return -ENODEV;
 
  	if (quirks->gmode) {
-		supported_thermal_profiles[PLATFORM_PROFILE_PERFORMANCE] =
+		priv->supported_thermal_profiles[PLATFORM_PROFILE_PERFORMANCE] =
  			WMAX_THERMAL_MODE_GMODE;
 
-		set_bit(PLATFORM_PROFILE_PERFORMANCE, pp_handler.choices);
+		set_bit(PLATFORM_PROFILE_PERFORMANCE, priv->pp_handler.choices);
  	}
 
-	pp_handler.profile_get = thermal_profile_get;
-	pp_handler.profile_set = thermal_profile_set;
-	pp_handler.name = "alienware-wmi";
-	pp_handler.dev = &wdev->dev;
+	priv->pp_handler.profile_get = thermal_profile_get;
+	priv->pp_handler.profile_set = thermal_profile_set;
+	priv->pp_handler.name = "alienware-wmi";
+	priv->pp_handler.dev = &wdev->dev;
 
-	return platform_profile_register(&pp_handler);
+	return platform_profile_register(&priv->pp_handler);
  }
 
-static void remove_thermal_profile(void)
+static int alienware_awcc_setup(struct wmi_device *wdev)
  {
-	if (quirks->thermal)
-		platform_profile_remove(&pp_handler);
+	struct awcc_priv *priv;
+	int ret;
+
+	priv = devm_kzalloc(&wdev->dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	dev_set_drvdata(&wdev->dev, priv);
+
+	priv->wdev = wdev;
Quoted 8 lines

drivers/platform/x86/dell/alienware-wmi.c static int create_thermal_profile(struct wmi_device *wdev) · line 1134

Quoted 6 lines
drivers/platform/x86/dell/alienware-wmi.c +6 -0
+
+	ret = create_thermal_profile(wdev);
+	if (ret < 0)
+		return ret;
+
+	return 0;

Just directly return the result of create_thermal_profile() here.

Ack.

Quoted 4 lines

With those minor issues being fixed:

Thanks!

Quoted 34 lines

drivers/platform/x86/dell/alienware-wmi.c static int create_thermal_profile(struct wmi_device *wdev) · line 1141

Quoted 8 lines
drivers/platform/x86/dell/alienware-wmi.c +7 -0
+}
+
+static void alienware_awcc_exit(struct wmi_device *wdev)
+{
+	struct awcc_priv *priv;
+
+	priv = dev_get_drvdata(&wdev->dev);

Please merge both statements.

Quoted 23 lines
drivers/platform/x86/dell/alienware-wmi.c +4 -2
+
+	platform_profile_remove(&priv->pp_handler);
  }
 
  /*
@@ -1242,7 +1275,7 @@ static int wmax_wmi_probe(struct wmi_device *wdev, const void *context)
  	int ret = 0;
 
  	if (quirks->thermal)
-		ret = create_thermal_profile(wdev);
+		ret = alienware_awcc_setup(wdev);
  	else
  		ret = alienware_alienfx_setup(&pdata);
 
@@ -1252,7 +1285,7 @@ static int wmax_wmi_probe(struct wmi_device *wdev, const void *context)
  static void wmax_wmi_remove(struct wmi_device *wdev)
  {
  	if (quirks->thermal)
-		remove_thermal_profile();
+		alienware_awcc_exit(wdev);
  	else
  		alienware_alienfx_exit(wdev);
  }
author maintainer
#27 lore raw

PATCH 10/20 alienware-wmi: Refactor LED control methods

In reply to Kurt Borja

Both WMI devices handled by this module specify a distinct interface for LED control. Previously this module handled this by dynamically adapting arguments passed to wmi_evaluate_method() based on the interface global variable.

To avoid the use of global variables, and enable the migration to non-deprecated WMI methods, let the WMI drivers define upd_led and upd_brightness operations, which completely replace alienware_update_led() and wmax_brightness().

Also define alienware_wmi_command(), which serves as a wrapper for wmidev_evaluate_method(). This new method is very similar to alienware_wmax_command() but is WMI device agnostic.

---
 drivers/platform/x86/dell/alienware-wmi.c | 180 ++++++++++++++--------
 1 file changed, 118 insertions(+), 62 deletions(-)
drivers/platform/x86/dell/alienware-wmi.c +118 -62
index c4ca141d628e..bcf3b2f80dfd 100644
@@ -417,12 +417,46 @@ struct alienfx_priv {
 	u8 lighting_control_state;
 };
 
+struct alienfx_ops {
+	int (*upd_led)(struct alienfx_priv *priv, struct wmi_device *wdev,
+		       u8 location);
+	int (*upd_brightness)(struct alienfx_priv *priv, struct wmi_device *wdev,
+			      u8 brightness);
+};
+
 struct alienfx_platdata {
 	struct wmi_device *wdev;
+	struct alienfx_ops ops;
 };
 
 static u8 interface;
 
+static acpi_status alienware_wmi_command(struct wmi_device *wdev, u32 method_id,
+					 void *in_args, size_t in_size, u32 *out_data)
+{
+	struct acpi_buffer out = {ACPI_ALLOCATE_BUFFER, NULL};
+	struct acpi_buffer in = {in_size, in_args};
+	union acpi_object *obj;
+	acpi_status ret;
+
+	if (out_data) {
+		ret = wmidev_evaluate_method(wdev, 0, method_id, &in, &out);
+		if (ACPI_FAILURE(ret))
+			goto out_free_ptr;
+
+		obj = (union acpi_object *)out.pointer;
+
+		if (obj && obj->type == ACPI_TYPE_INTEGER)
+			*out_data = (u32)obj->integer.value;
+	} else {
+		ret = wmidev_evaluate_method(wdev, 0, method_id, &in, NULL);
+	}
+
+out_free_ptr:
+	kfree(out.pointer);
+	return ret;
+}
+
 /*
  * Helpers used for zone control
  */
@@ -453,46 +487,6 @@ static int parse_rgb(const char *buf, struct color_platform *colors)
 /*
  * Individual RGB zone control
  */
-static int alienware_update_led(struct alienfx_priv *priv, u8 location)
-{
-	int method_id;
-	acpi_status status;
-	char *guid;
-	struct acpi_buffer input;
-	struct legacy_led_args legacy_args;
-	struct wmax_led_args wmax_basic_args;
-	if (interface == WMAX) {
-		wmax_basic_args.led_mask = 1 << location;
-		wmax_basic_args.colors = priv->colors[location];
-		wmax_basic_args.state = priv->lighting_control_state;
-		guid = WMAX_CONTROL_GUID;
-		method_id = WMAX_METHOD_ZONE_CONTROL;
-
-		input.length = sizeof(wmax_basic_args);
-		input.pointer = &wmax_basic_args;
-	} else {
-		legacy_args.colors = priv->colors[location];
-		legacy_args.brightness = priv->global_brightness;
-		legacy_args.state = 0;
-		if (priv->lighting_control_state == LEGACY_BOOTING ||
-		    priv->lighting_control_state == LEGACY_SUSPEND) {
-			guid = LEGACY_POWER_CONTROL_GUID;
-			legacy_args.state = priv->lighting_control_state;
-		} else
-			guid = LEGACY_CONTROL_GUID;
-		method_id = location + 1;
-
-		input.length = sizeof(legacy_args);
-		input.pointer = &legacy_args;
-	}
-	pr_debug("alienware-wmi: guid %s method %d\n", guid, method_id);
-
-	status = wmi_evaluate_method(guid, 0, method_id, &input, NULL);
-	if (ACPI_FAILURE(status))
-		pr_err("alienware-wmi: zone set failure: %u\n", status);
-	return ACPI_FAILURE(status);
-}
-
 static ssize_t zone_show(struct device *dev, struct device_attribute *attr,
 			 char *buf, u8 location)
 {
@@ -510,18 +504,20 @@ static ssize_t zone_show(struct device *dev, struct device_attribute *attr,
 static ssize_t zone_store(struct device *dev, struct device_attribute *attr,
 			  const char *buf, size_t count, u8 location)
 {
+	struct alienfx_platdata *pdata;
 	struct color_platform *colors;
 	struct alienfx_priv *priv;
 	int ret;
 
 	priv = dev_get_drvdata(dev);
+	pdata = dev_get_platdata(dev);
 	colors = &priv->colors[location];
 
 	ret = parse_rgb(buf, colors);
 	if (ret)
 		return ret;
 
-	ret = alienware_update_led(priv, location);
+	ret = pdata->ops.upd_led(priv, pdata->wdev, location);
 
 	return ret ? ret : count;
 }
@@ -628,35 +624,19 @@ static struct attribute_group zone_attribute_group = {
 /*
  * LED Brightness (Global)
  */
-static int wmax_brightness(int brightness)
-{
-	acpi_status status;
-	struct acpi_buffer input;
-	struct wmax_brightness_args args = {
-		.led_mask = 0xFF,
-		.percentage = brightness,
-	};
-	input.length = sizeof(args);
-	input.pointer = &args;
-	status = wmi_evaluate_method(WMAX_CONTROL_GUID, 0,
-				     WMAX_METHOD_BRIGHTNESS, &input, NULL);
-	if (ACPI_FAILURE(status))
-		pr_err("alienware-wmi: brightness set failure: %u\n", status);
-	return ACPI_FAILURE(status);
-}
-
 static void global_led_set(struct led_classdev *led_cdev,
 			   enum led_brightness brightness)
 {
+	struct alienfx_platdata *pdata;
 	struct alienfx_priv *priv;
 	int ret;
 
 	priv = container_of(led_cdev, struct alienfx_priv, global_led);
+	pdata = dev_get_platdata(&priv->pdev->dev);
+
 	priv->global_brightness = brightness;
-	if (interface == WMAX)
-		ret = wmax_brightness(brightness);
-	else
-		ret = alienware_update_led(priv, 0);
+
+	ret = pdata->ops.upd_brightness(priv, pdata->wdev, brightness);
 	if (ret)
 		pr_err("LED brightness update failed\n");
 }
@@ -1224,10 +1204,47 @@ static void alienware_alienfx_exit(struct wmi_device *wdev)
 /*
  * Legacy WMI driver
  */
+static int legacy_wmi_update_led(struct alienfx_priv *priv,
+				 struct wmi_device *wdev, u8 location)
+{
+	struct legacy_led_args legacy_args;
+	struct acpi_buffer input;
+	acpi_status status;
+
+	legacy_args.colors = priv->colors[location];
+	legacy_args.brightness = priv->global_brightness;
+	legacy_args.state = priv->lighting_control_state;
+
+	input.length = sizeof(legacy_args);
+	input.pointer = &legacy_args;
+
+	if (legacy_args.state == LEGACY_RUNNING)
+		status = alienware_wmi_command(wdev, location + 1, &legacy_args,
+					       sizeof(legacy_args), NULL);
+	else
+		status = wmi_evaluate_method(LEGACY_POWER_CONTROL_GUID, 0,
+					     location + 1, &input, NULL);
+
+	if (ACPI_FAILURE(status))
+		return -EIO;
+
+	return 0;
+}
+
+static int legacy_wmi_update_brightness(struct alienfx_priv *priv,
+					struct wmi_device *wdev, u8 brightness)
+{
+	return legacy_wmi_update_led(priv, wdev, 0);
+}
+
 static int legacy_wmi_probe(struct wmi_device *wdev, const void *context)
 {
 	struct alienfx_platdata pdata = {
 		.wdev = wdev,
+		.ops = {
+			.upd_led = legacy_wmi_update_led,
+			.upd_brightness = legacy_wmi_update_brightness,
+		},
 	};
 
 	return alienware_alienfx_setup(&pdata);
@@ -1267,10 +1284,49 @@ static void __exit alienware_legacy_wmi_exit(void)
 /*
  * WMAX WMI driver
  */
+static int wmax_wmi_update_led(struct alienfx_priv *priv,
+			       struct wmi_device *wdev, u8 location)
+{
+	struct wmax_led_args in_args = {
+		.led_mask = 1 << location,
+		.colors = priv->colors[location],
+		.state = priv->lighting_control_state,
+	};
+	acpi_status status;
+
+	status = alienware_wmi_command(wdev, WMAX_METHOD_ZONE_CONTROL,
+				       &in_args, sizeof(in_args), NULL);
+	if (ACPI_FAILURE(status))
+		return -EIO;
+
+	return 0;
+}
+
+static int wmax_wmi_update_brightness(struct alienfx_priv *priv,
+				      struct wmi_device *wdev, u8 brightness)
+{
+	struct wmax_brightness_args in_args = {
+		.led_mask = 0xFF,
+		.percentage = brightness,
+	};
+	acpi_status status;
+
+	status = alienware_wmi_command(wdev, WMAX_METHOD_BRIGHTNESS, &in_args,
+				       sizeof(in_args), NULL);
+	if (ACPI_FAILURE(status))
+		return -EIO;
+
+	return 0;
+}
+
 static int wmax_wmi_probe(struct wmi_device *wdev, const void *context)
 {
 	struct alienfx_platdata pdata = {
 		.wdev = wdev,
+		.ops = {
+			.upd_led = wmax_wmi_update_led,
+			.upd_brightness = wmax_wmi_update_brightness,
+		},
 	};
 	int ret = 0;
 
Signature · 1 line
2.47.1
#28 lore raw

Re: [PATCH 10/20] alienware-wmi: Refactor LED control methods

Am 21.12.24 um 06:59 schrieb Kurt Borja:

Quoted 33 lines

Both WMI devices handled by this module specify a distinct interface for LED control. Previously this module handled this by dynamically adapting arguments passed to wmi_evaluate_method() based on the interface global variable.

To avoid the use of global variables, and enable the migration to non-deprecated WMI methods, let the WMI drivers define upd_led and upd_brightness operations, which completely replace alienware_update_led() and wmax_brightness().

Also define alienware_wmi_command(), which serves as a wrapper for wmidev_evaluate_method(). This new method is very similar to alienware_wmax_command() but is WMI device agnostic.

---
  drivers/platform/x86/dell/alienware-wmi.c | 180 ++++++++++++++--------
  1 file changed, 118 insertions(+), 62 deletions(-)
drivers/platform/x86/dell/alienware-wmi.c +6 -0
index c4ca141d628e..bcf3b2f80dfd 100644
@@ -417,12 +417,46 @@ struct alienfx_priv {
  	u8 lighting_control_state;
  };
 
+struct alienfx_ops {
+	int (*upd_led)(struct alienfx_priv *priv, struct wmi_device *wdev,
+		       u8 location);
+	int (*upd_brightness)(struct alienfx_priv *priv, struct wmi_device *wdev,
+			      u8 brightness);
+};

drivers/platform/x86/dell/alienware-wmi.c struct alienfx_priv { · line 435

Quoted 10 lines
drivers/platform/x86/dell/alienware-wmi.c +4 -0
+
  struct alienfx_platdata {
  	struct wmi_device *wdev;
+	struct alienfx_ops ops;
  };
 
  static u8 interface;
 
+static acpi_status alienware_wmi_command(struct wmi_device *wdev, u32 method_id,
+					 void *in_args, size_t in_size, u32 *out_data)

Please return a errno here instead of acpi_status.

drivers/platform/x86/dell/alienware-wmi.c struct alienfx_priv { · line 445

Quoted 10 lines
drivers/platform/x86/dell/alienware-wmi.c +10 -0
+{
+	struct acpi_buffer out = {ACPI_ALLOCATE_BUFFER, NULL};
+	struct acpi_buffer in = {in_size, in_args};
+	union acpi_object *obj;
+	acpi_status ret;
+
+	if (out_data) {
+		ret = wmidev_evaluate_method(wdev, 0, method_id, &in, &out);
+		if (ACPI_FAILURE(ret))
+			goto out_free_ptr;

Just return -EIO here as out.pointer will contain no valid data in this case.

drivers/platform/x86/dell/alienware-wmi.c struct alienfx_priv { · line 447

Quoted 2 lines
drivers/platform/x86/dell/alienware-wmi.c +2 -0
+
+		obj = (union acpi_object *)out.pointer;

Unnecessary cast.

drivers/platform/x86/dell/alienware-wmi.c struct alienfx_priv { · line 450

Quoted 3 lines
drivers/platform/x86/dell/alienware-wmi.c +3 -0
+
+		if (obj && obj->type == ACPI_TYPE_INTEGER)
+			*out_data = (u32)obj->integer.value;

Please move the code for freeing "obj" to this line.

Quoted 126 lines
drivers/platform/x86/dell/alienware-wmi.c +17 -62
+	} else {
+		ret = wmidev_evaluate_method(wdev, 0, method_id, &in, NULL);
+	}
+
+out_free_ptr:
+	kfree(out.pointer);
+	return ret;
+}
+
  /*
   * Helpers used for zone control
   */
@@ -453,46 +487,6 @@ static int parse_rgb(const char *buf, struct color_platform *colors)
  /*
   * Individual RGB zone control
   */
-static int alienware_update_led(struct alienfx_priv *priv, u8 location)
-{
-	int method_id;
-	acpi_status status;
-	char *guid;
-	struct acpi_buffer input;
-	struct legacy_led_args legacy_args;
-	struct wmax_led_args wmax_basic_args;
-	if (interface == WMAX) {
-		wmax_basic_args.led_mask = 1 << location;
-		wmax_basic_args.colors = priv->colors[location];
-		wmax_basic_args.state = priv->lighting_control_state;
-		guid = WMAX_CONTROL_GUID;
-		method_id = WMAX_METHOD_ZONE_CONTROL;
-
-		input.length = sizeof(wmax_basic_args);
-		input.pointer = &wmax_basic_args;
-	} else {
-		legacy_args.colors = priv->colors[location];
-		legacy_args.brightness = priv->global_brightness;
-		legacy_args.state = 0;
-		if (priv->lighting_control_state == LEGACY_BOOTING ||
-		    priv->lighting_control_state == LEGACY_SUSPEND) {
-			guid = LEGACY_POWER_CONTROL_GUID;
-			legacy_args.state = priv->lighting_control_state;
-		} else
-			guid = LEGACY_CONTROL_GUID;
-		method_id = location + 1;
-
-		input.length = sizeof(legacy_args);
-		input.pointer = &legacy_args;
-	}
-	pr_debug("alienware-wmi: guid %s method %d\n", guid, method_id);
-
-	status = wmi_evaluate_method(guid, 0, method_id, &input, NULL);
-	if (ACPI_FAILURE(status))
-		pr_err("alienware-wmi: zone set failure: %u\n", status);
-	return ACPI_FAILURE(status);
-}
-
  static ssize_t zone_show(struct device *dev, struct device_attribute *attr,
  			 char *buf, u8 location)
  {
@@ -510,18 +504,20 @@ static ssize_t zone_show(struct device *dev, struct device_attribute *attr,
  static ssize_t zone_store(struct device *dev, struct device_attribute *attr,
  			  const char *buf, size_t count, u8 location)
  {
+	struct alienfx_platdata *pdata;
  	struct color_platform *colors;
  	struct alienfx_priv *priv;
  	int ret;
 
  	priv = dev_get_drvdata(dev);
+	pdata = dev_get_platdata(dev);
  	colors = &priv->colors[location];
 
  	ret = parse_rgb(buf, colors);
  	if (ret)
  		return ret;
 
-	ret = alienware_update_led(priv, location);
+	ret = pdata->ops.upd_led(priv, pdata->wdev, location);
 
  	return ret ? ret : count;
  }
@@ -628,35 +624,19 @@ static struct attribute_group zone_attribute_group = {
  /*
   * LED Brightness (Global)
   */
-static int wmax_brightness(int brightness)
-{
-	acpi_status status;
-	struct acpi_buffer input;
-	struct wmax_brightness_args args = {
-		.led_mask = 0xFF,
-		.percentage = brightness,
-	};
-	input.length = sizeof(args);
-	input.pointer = &args;
-	status = wmi_evaluate_method(WMAX_CONTROL_GUID, 0,
-				     WMAX_METHOD_BRIGHTNESS, &input, NULL);
-	if (ACPI_FAILURE(status))
-		pr_err("alienware-wmi: brightness set failure: %u\n", status);
-	return ACPI_FAILURE(status);
-}
-
  static void global_led_set(struct led_classdev *led_cdev,
  			   enum led_brightness brightness)
  {
+	struct alienfx_platdata *pdata;
  	struct alienfx_priv *priv;
  	int ret;
 
  	priv = container_of(led_cdev, struct alienfx_priv, global_led);
+	pdata = dev_get_platdata(&priv->pdev->dev);
+
  	priv->global_brightness = brightness;
-	if (interface == WMAX)
-		ret = wmax_brightness(brightness);
-	else
-		ret = alienware_update_led(priv, 0);
+
+	ret = pdata->ops.upd_brightness(priv, pdata->wdev, brightness);
  	if (ret)
  		pr_err("LED brightness update failed\n");
  }
@@ -1224,10 +1204,47 @@ static void alienware_alienfx_exit(struct wmi_device *wdev)
  /*
   * Legacy WMI driver
   */

drivers/platform/x86/dell/alienware-wmi.c static void alienware_alienfx_exit(struct wmi_device *wdev) · line 1216

Quoted 10 lines
drivers/platform/x86/dell/alienware-wmi.c +10 -0
+static int legacy_wmi_update_led(struct alienfx_priv *priv,
+				 struct wmi_device *wdev, u8 location)
+{
+	struct legacy_led_args legacy_args;
+	struct acpi_buffer input;
+	acpi_status status;
+
+	legacy_args.colors = priv->colors[location];
+	legacy_args.brightness = priv->global_brightness;
+	legacy_args.state = priv->lighting_control_state;

The original code set "legacy_args.state" to "0" if "priv->lighting_control_state" was "LEGACY_RUNNING". Please keep this behavior.

Thanks,
Armin Wolf

Quoted 84 lines
drivers/platform/x86/dell/alienware-wmi.c +66 -0
+
+	input.length = sizeof(legacy_args);
+	input.pointer = &legacy_args;
+
+	if (legacy_args.state == LEGACY_RUNNING)
+		status = alienware_wmi_command(wdev, location + 1, &legacy_args,
+					       sizeof(legacy_args), NULL);
+	else
+		status = wmi_evaluate_method(LEGACY_POWER_CONTROL_GUID, 0,
+					     location + 1, &input, NULL);
+
+	if (ACPI_FAILURE(status))
+		return -EIO;
+
+	return 0;
+}
+
+static int legacy_wmi_update_brightness(struct alienfx_priv *priv,
+					struct wmi_device *wdev, u8 brightness)
+{
+	return legacy_wmi_update_led(priv, wdev, 0);
+}
+
  static int legacy_wmi_probe(struct wmi_device *wdev, const void *context)
  {
  	struct alienfx_platdata pdata = {
  		.wdev = wdev,
+		.ops = {
+			.upd_led = legacy_wmi_update_led,
+			.upd_brightness = legacy_wmi_update_brightness,
+		},
  	};
 
  	return alienware_alienfx_setup(&pdata);
@@ -1267,10 +1284,49 @@ static void __exit alienware_legacy_wmi_exit(void)
  /*
   * WMAX WMI driver
   */
+static int wmax_wmi_update_led(struct alienfx_priv *priv,
+			       struct wmi_device *wdev, u8 location)
+{
+	struct wmax_led_args in_args = {
+		.led_mask = 1 << location,
+		.colors = priv->colors[location],
+		.state = priv->lighting_control_state,
+	};
+	acpi_status status;
+
+	status = alienware_wmi_command(wdev, WMAX_METHOD_ZONE_CONTROL,
+				       &in_args, sizeof(in_args), NULL);
+	if (ACPI_FAILURE(status))
+		return -EIO;
+
+	return 0;
+}
+
+static int wmax_wmi_update_brightness(struct alienfx_priv *priv,
+				      struct wmi_device *wdev, u8 brightness)
+{
+	struct wmax_brightness_args in_args = {
+		.led_mask = 0xFF,
+		.percentage = brightness,
+	};
+	acpi_status status;
+
+	status = alienware_wmi_command(wdev, WMAX_METHOD_BRIGHTNESS, &in_args,
+				       sizeof(in_args), NULL);
+	if (ACPI_FAILURE(status))
+		return -EIO;
+
+	return 0;
+}
+
  static int wmax_wmi_probe(struct wmi_device *wdev, const void *context)
  {
  	struct alienfx_platdata pdata = {
  		.wdev = wdev,
+		.ops = {
+			.upd_led = wmax_wmi_update_led,
+			.upd_brightness = wmax_wmi_update_brightness,
+		},
  	};
  	int ret = 0;
 
author maintainer
#29 lore raw

Re: [PATCH 10/20] alienware-wmi: Refactor LED control methods

Quoted 41 lines · Armin Wolf

Am 21.12.24 um 06:59 schrieb Kurt Borja:

Quoted 39 lines

Both WMI devices handled by this module specify a distinct interface for LED control. Previously this module handled this by dynamically adapting arguments passed to wmi_evaluate_method() based on the interface global variable.

To avoid the use of global variables, and enable the migration to non-deprecated WMI methods, let the WMI drivers define upd_led and upd_brightness operations, which completely replace alienware_update_led() and wmax_brightness().

Also define alienware_wmi_command(), which serves as a wrapper for wmidev_evaluate_method(). This new method is very similar to alienware_wmax_command() but is WMI device agnostic.

---
  drivers/platform/x86/dell/alienware-wmi.c | 180 ++++++++++++++--------
  1 file changed, 118 insertions(+), 62 deletions(-)
drivers/platform/x86/dell/alienware-wmi.c +8 -0
index c4ca141d628e..bcf3b2f80dfd 100644
@@ -417,12 +417,46 @@ struct alienfx_priv {
  	u8 lighting_control_state;
  };
 
+struct alienfx_ops {
+	int (*upd_led)(struct alienfx_priv *priv, struct wmi_device *wdev,
+		       u8 location);
+	int (*upd_brightness)(struct alienfx_priv *priv, struct wmi_device *wdev,
+			      u8 brightness);
+};
+
  struct alienfx_platdata {
  	struct wmi_device *wdev;
+	struct alienfx_ops ops;
  };
 
Quoted 6 lines

drivers/platform/x86/dell/alienware-wmi.c struct alienfx_priv { · line 435

Quoted 4 lines
drivers/platform/x86/dell/alienware-wmi.c +2 -0
  static u8 interface;
 
+static acpi_status alienware_wmi_command(struct wmi_device *wdev, u32 method_id,
+					 void *in_args, size_t in_size, u32 *out_data)

Please return a errno here instead of acpi_status.

Ack!

Quoted 13 lines

drivers/platform/x86/dell/alienware-wmi.c struct alienfx_priv { · line 445

Quoted 11 lines
drivers/platform/x86/dell/alienware-wmi.c +10 -0
+{
+	struct acpi_buffer out = {ACPI_ALLOCATE_BUFFER, NULL};
+	struct acpi_buffer in = {in_size, in_args};
+	union acpi_object *obj;
+	acpi_status ret;
+
+	if (out_data) {
+		ret = wmidev_evaluate_method(wdev, 0, method_id, &in, &out);
+		if (ACPI_FAILURE(ret))
+			goto out_free_ptr;

Just return -EIO here as out.pointer will contain no valid data in this case.

I wasn't sure of this. Thanks.

Quoted 5 lines

drivers/platform/x86/dell/alienware-wmi.c struct alienfx_priv { · line 447

Quoted 3 lines
drivers/platform/x86/dell/alienware-wmi.c +2 -0
+
+		obj = (union acpi_object *)out.pointer;

Unnecessary cast.

Ack.

Quoted 6 lines

drivers/platform/x86/dell/alienware-wmi.c struct alienfx_priv { · line 450

Quoted 4 lines
drivers/platform/x86/dell/alienware-wmi.c +3 -0
+
+		if (obj && obj->type == ACPI_TYPE_INTEGER)
+			*out_data = (u32)obj->integer.value;

Please move the code for freeing "obj" to this line.

Ack.

Quoted 132 lines
Quoted 132 lines
drivers/platform/x86/dell/alienware-wmi.c +22 -62
+	} else {
+		ret = wmidev_evaluate_method(wdev, 0, method_id, &in, NULL);
+	}
+
+out_free_ptr:
+	kfree(out.pointer);
+	return ret;
+}
+
  /*
   * Helpers used for zone control
   */
@@ -453,46 +487,6 @@ static int parse_rgb(const char *buf, struct color_platform *colors)
  /*
   * Individual RGB zone control
   */
-static int alienware_update_led(struct alienfx_priv *priv, u8 location)
-{
-	int method_id;
-	acpi_status status;
-	char *guid;
-	struct acpi_buffer input;
-	struct legacy_led_args legacy_args;
-	struct wmax_led_args wmax_basic_args;
-	if (interface == WMAX) {
-		wmax_basic_args.led_mask = 1 << location;
-		wmax_basic_args.colors = priv->colors[location];
-		wmax_basic_args.state = priv->lighting_control_state;
-		guid = WMAX_CONTROL_GUID;
-		method_id = WMAX_METHOD_ZONE_CONTROL;
-
-		input.length = sizeof(wmax_basic_args);
-		input.pointer = &wmax_basic_args;
-	} else {
-		legacy_args.colors = priv->colors[location];
-		legacy_args.brightness = priv->global_brightness;
-		legacy_args.state = 0;
-		if (priv->lighting_control_state == LEGACY_BOOTING ||
-		    priv->lighting_control_state == LEGACY_SUSPEND) {
-			guid = LEGACY_POWER_CONTROL_GUID;
-			legacy_args.state = priv->lighting_control_state;
-		} else
-			guid = LEGACY_CONTROL_GUID;
-		method_id = location + 1;
-
-		input.length = sizeof(legacy_args);
-		input.pointer = &legacy_args;
-	}
-	pr_debug("alienware-wmi: guid %s method %d\n", guid, method_id);
-
-	status = wmi_evaluate_method(guid, 0, method_id, &input, NULL);
-	if (ACPI_FAILURE(status))
-		pr_err("alienware-wmi: zone set failure: %u\n", status);
-	return ACPI_FAILURE(status);
-}
-
  static ssize_t zone_show(struct device *dev, struct device_attribute *attr,
  			 char *buf, u8 location)
  {
@@ -510,18 +504,20 @@ static ssize_t zone_show(struct device *dev, struct device_attribute *attr,
  static ssize_t zone_store(struct device *dev, struct device_attribute *attr,
  			  const char *buf, size_t count, u8 location)
  {
+	struct alienfx_platdata *pdata;
  	struct color_platform *colors;
  	struct alienfx_priv *priv;
  	int ret;
 
  	priv = dev_get_drvdata(dev);
+	pdata = dev_get_platdata(dev);
  	colors = &priv->colors[location];
 
  	ret = parse_rgb(buf, colors);
  	if (ret)
  		return ret;
 
-	ret = alienware_update_led(priv, location);
+	ret = pdata->ops.upd_led(priv, pdata->wdev, location);
 
  	return ret ? ret : count;
  }
@@ -628,35 +624,19 @@ static struct attribute_group zone_attribute_group = {
  /*
   * LED Brightness (Global)
   */
-static int wmax_brightness(int brightness)
-{
-	acpi_status status;
-	struct acpi_buffer input;
-	struct wmax_brightness_args args = {
-		.led_mask = 0xFF,
-		.percentage = brightness,
-	};
-	input.length = sizeof(args);
-	input.pointer = &args;
-	status = wmi_evaluate_method(WMAX_CONTROL_GUID, 0,
-				     WMAX_METHOD_BRIGHTNESS, &input, NULL);
-	if (ACPI_FAILURE(status))
-		pr_err("alienware-wmi: brightness set failure: %u\n", status);
-	return ACPI_FAILURE(status);
-}
-
  static void global_led_set(struct led_classdev *led_cdev,
  			   enum led_brightness brightness)
  {
+	struct alienfx_platdata *pdata;
  	struct alienfx_priv *priv;
  	int ret;
 
  	priv = container_of(led_cdev, struct alienfx_priv, global_led);
+	pdata = dev_get_platdata(&priv->pdev->dev);
+
  	priv->global_brightness = brightness;
-	if (interface == WMAX)
-		ret = wmax_brightness(brightness);
-	else
-		ret = alienware_update_led(priv, 0);
+
+	ret = pdata->ops.upd_brightness(priv, pdata->wdev, brightness);
  	if (ret)
  		pr_err("LED brightness update failed\n");
  }
@@ -1224,10 +1204,47 @@ static void alienware_alienfx_exit(struct wmi_device *wdev)
  /*
   * Legacy WMI driver
   */
+static int legacy_wmi_update_led(struct alienfx_priv *priv,
+				 struct wmi_device *wdev, u8 location)
+{
+	struct legacy_led_args legacy_args;
+	struct acpi_buffer input;
Quoted 8 lines

drivers/platform/x86/dell/alienware-wmi.c static void alienware_alienfx_exit(struct wmi_device *wdev) · line 1216

Quoted 5 lines
drivers/platform/x86/dell/alienware-wmi.c +5 -0
+	acpi_status status;
+
+	legacy_args.colors = priv->colors[location];
+	legacy_args.brightness = priv->global_brightness;
+	legacy_args.state = priv->lighting_control_state;

The original code set "legacy_args.state" to "0" if "priv->lighting_control_state" was "LEGACY_RUNNING". Please keep this behavior.

I missed this. Thanks.

Quoted 88 lines

Thanks,
Armin Wolf

Quoted 84 lines
drivers/platform/x86/dell/alienware-wmi.c +66 -0
+
+	input.length = sizeof(legacy_args);
+	input.pointer = &legacy_args;
+
+	if (legacy_args.state == LEGACY_RUNNING)
+		status = alienware_wmi_command(wdev, location + 1, &legacy_args,
+					       sizeof(legacy_args), NULL);
+	else
+		status = wmi_evaluate_method(LEGACY_POWER_CONTROL_GUID, 0,
+					     location + 1, &input, NULL);
+
+	if (ACPI_FAILURE(status))
+		return -EIO;
+
+	return 0;
+}
+
+static int legacy_wmi_update_brightness(struct alienfx_priv *priv,
+					struct wmi_device *wdev, u8 brightness)
+{
+	return legacy_wmi_update_led(priv, wdev, 0);
+}
+
  static int legacy_wmi_probe(struct wmi_device *wdev, const void *context)
  {
  	struct alienfx_platdata pdata = {
  		.wdev = wdev,
+		.ops = {
+			.upd_led = legacy_wmi_update_led,
+			.upd_brightness = legacy_wmi_update_brightness,
+		},
  	};
 
  	return alienware_alienfx_setup(&pdata);
@@ -1267,10 +1284,49 @@ static void __exit alienware_legacy_wmi_exit(void)
  /*
   * WMAX WMI driver
   */
+static int wmax_wmi_update_led(struct alienfx_priv *priv,
+			       struct wmi_device *wdev, u8 location)
+{
+	struct wmax_led_args in_args = {
+		.led_mask = 1 << location,
+		.colors = priv->colors[location],
+		.state = priv->lighting_control_state,
+	};
+	acpi_status status;
+
+	status = alienware_wmi_command(wdev, WMAX_METHOD_ZONE_CONTROL,
+				       &in_args, sizeof(in_args), NULL);
+	if (ACPI_FAILURE(status))
+		return -EIO;
+
+	return 0;
+}
+
+static int wmax_wmi_update_brightness(struct alienfx_priv *priv,
+				      struct wmi_device *wdev, u8 brightness)
+{
+	struct wmax_brightness_args in_args = {
+		.led_mask = 0xFF,
+		.percentage = brightness,
+	};
+	acpi_status status;
+
+	status = alienware_wmi_command(wdev, WMAX_METHOD_BRIGHTNESS, &in_args,
+				       sizeof(in_args), NULL);
+	if (ACPI_FAILURE(status))
+		return -EIO;
+
+	return 0;
+}
+
  static int wmax_wmi_probe(struct wmi_device *wdev, const void *context)
  {
  	struct alienfx_platdata pdata = {
  		.wdev = wdev,
+		.ops = {
+			.upd_led = wmax_wmi_update_led,
+			.upd_brightness = wmax_wmi_update_brightness,
+		},
  	};
  	int ret = 0;
 
author maintainer
#30 lore raw

PATCH 11/20 alienware-wmi: Refactor hdmi, amplifier, deepslp methods

In reply to Kurt Borja

Refactor show/store methods for hdmi, amplifier, deepslp sysfs groups to use alienware_wmi_command() instead of alienware_wmax_command() which uses deprecated WMI methods.

---
 drivers/platform/x86/dell/alienware-wmi.c | 51 ++++++++++++++++-------
 1 file changed, 36 insertions(+), 15 deletions(-)
drivers/platform/x86/dell/alienware-wmi.c +36 -15
index bcf3b2f80dfd..b9da5fe657a9 100644
@@ -685,14 +685,18 @@ static acpi_status alienware_wmax_command(void *in_args, size_t in_size,
 static ssize_t show_hdmi_cable(struct device *dev,
 			       struct device_attribute *attr, char *buf)
 {
+	struct alienfx_platdata *pdata;
 	acpi_status status;
 	u32 out_data;
 	struct wmax_basic_args in_args = {
 		.arg = 0,
 	};
-	status =
-	    alienware_wmax_command(&in_args, sizeof(in_args),
-				   WMAX_METHOD_HDMI_CABLE, &out_data);
+
+	pdata = dev_get_platdata(dev);
+
+	status = alienware_wmi_command(pdata->wdev, WMAX_METHOD_HDMI_CABLE,
+				       &in_args, sizeof(in_args), &out_data);
+
 	if (ACPI_SUCCESS(status)) {
 		if (out_data == 0)
 			return sysfs_emit(buf, "[unconnected] connected unknown\n");
@@ -706,14 +710,17 @@ static ssize_t show_hdmi_cable(struct device *dev,
 static ssize_t show_hdmi_source(struct device *dev,
 				struct device_attribute *attr, char *buf)
 {
+	struct alienfx_platdata *pdata;
 	acpi_status status;
 	u32 out_data;
 	struct wmax_basic_args in_args = {
 		.arg = 0,
 	};
-	status =
-	    alienware_wmax_command(&in_args, sizeof(in_args),
-				   WMAX_METHOD_HDMI_STATUS, &out_data);
+
+	pdata = dev_get_platdata(dev);
+
+	status = alienware_wmi_command(pdata->wdev, WMAX_METHOD_HDMI_STATUS,
+				       &in_args, sizeof(in_args), &out_data);
 
 	if (ACPI_SUCCESS(status)) {
 		if (out_data == 1)
@@ -729,8 +736,12 @@ static ssize_t toggle_hdmi_source(struct device *dev,
 				  struct device_attribute *attr,
 				  const char *buf, size_t count)
 {
+	struct alienfx_platdata *pdata;
 	acpi_status status;
 	struct wmax_basic_args args;
+
+	pdata = dev_get_platdata(dev);
+
 	if (strcmp(buf, "gpu\n") == 0)
 		args.arg = 1;
 	else if (strcmp(buf, "input\n") == 0)
@@ -739,8 +750,8 @@ static ssize_t toggle_hdmi_source(struct device *dev,
 		args.arg = 3;
 	pr_debug("alienware-wmi: setting hdmi to %d : %s", args.arg, buf);
 
-	status = alienware_wmax_command(&args, sizeof(args),
-					WMAX_METHOD_HDMI_SOURCE, NULL);
+	status = alienware_wmi_command(pdata->wdev, WMAX_METHOD_HDMI_SOURCE,
+				       &args, sizeof(args), NULL);
 
 	if (ACPI_FAILURE(status))
 		pr_err("alienware-wmi: HDMI toggle failed: results: %u\n",
@@ -778,14 +789,17 @@ static const struct attribute_group hdmi_attribute_group = {
 static ssize_t show_amplifier_status(struct device *dev,
 				     struct device_attribute *attr, char *buf)
 {
+	struct alienfx_platdata *pdata;
 	acpi_status status;
 	u32 out_data;
 	struct wmax_basic_args in_args = {
 		.arg = 0,
 	};
-	status =
-	    alienware_wmax_command(&in_args, sizeof(in_args),
-				   WMAX_METHOD_AMPLIFIER_CABLE, &out_data);
+
+	pdata = dev_get_platdata(dev);
+
+	status = alienware_wmi_command(pdata->wdev, WMAX_METHOD_AMPLIFIER_CABLE,
+				       &in_args, sizeof(in_args), &out_data);
 	if (ACPI_SUCCESS(status)) {
 		if (out_data == 0)
 			return sysfs_emit(buf, "[unconnected] connected unknown\n");
@@ -822,13 +836,17 @@ static const struct attribute_group amplifier_attribute_group = {
 static ssize_t show_deepsleep_status(struct device *dev,
 				     struct device_attribute *attr, char *buf)
 {
+	struct alienfx_platdata *pdata;
 	acpi_status status;
 	u32 out_data;
 	struct wmax_basic_args in_args = {
 		.arg = 0,
 	};
-	status = alienware_wmax_command(&in_args, sizeof(in_args),
-					WMAX_METHOD_DEEP_SLEEP_STATUS, &out_data);
+
+	pdata = dev_get_platdata(dev);
+
+	status = alienware_wmi_command(pdata->wdev, WMAX_METHOD_DEEP_SLEEP_STATUS,
+				       &in_args, sizeof(in_args), &out_data);
 	if (ACPI_SUCCESS(status)) {
 		if (out_data == 0)
 			return sysfs_emit(buf, "[disabled] s5 s5_s4\n");
@@ -845,9 +863,12 @@ static ssize_t toggle_deepsleep(struct device *dev,
 				struct device_attribute *attr,
 				const char *buf, size_t count)
 {
+	struct alienfx_platdata *pdata;
 	acpi_status status;
 	struct wmax_basic_args args;
 
+	pdata = dev_get_platdata(dev);
+
 	if (strcmp(buf, "disabled\n") == 0)
 		args.arg = 0;
 	else if (strcmp(buf, "s5\n") == 0)
@@ -856,8 +877,8 @@ static ssize_t toggle_deepsleep(struct device *dev,
 		args.arg = 2;
 	pr_debug("alienware-wmi: setting deep sleep to %d : %s", args.arg, buf);
 
-	status = alienware_wmax_command(&args, sizeof(args),
-					WMAX_METHOD_DEEP_SLEEP_CONTROL, NULL);
+	status = alienware_wmi_command(pdata->wdev, WMAX_METHOD_DEEP_SLEEP_CONTROL,
+				       &args, sizeof(args), NULL);
 
 	if (ACPI_FAILURE(status))
 		pr_err("alienware-wmi: deep sleep control failed: results: %u\n",
Signature · 1 line
2.47.1
Reviewed-by on v1 11/20
#31 lore raw

Re: [PATCH 11/20] alienware-wmi: Refactor hdmi, amplifier, deepslp methods

Am 21.12.24 um 06:59 schrieb Kurt Borja:

Quoted 3 lines

Refactor show/store methods for hdmi, amplifier, deepslp sysfs groups to use alienware_wmi_command() instead of alienware_wmax_command() which uses deprecated WMI methods.

Quoted 142 lines
---
  drivers/platform/x86/dell/alienware-wmi.c | 51 ++++++++++++++++-------
  1 file changed, 36 insertions(+), 15 deletions(-)
drivers/platform/x86/dell/alienware-wmi.c +36 -15
index bcf3b2f80dfd..b9da5fe657a9 100644
@@ -685,14 +685,18 @@ static acpi_status alienware_wmax_command(void *in_args, size_t in_size,
  static ssize_t show_hdmi_cable(struct device *dev,
  			       struct device_attribute *attr, char *buf)
  {
+	struct alienfx_platdata *pdata;
  	acpi_status status;
  	u32 out_data;
  	struct wmax_basic_args in_args = {
  		.arg = 0,
  	};
-	status =
-	    alienware_wmax_command(&in_args, sizeof(in_args),
-				   WMAX_METHOD_HDMI_CABLE, &out_data);
+
+	pdata = dev_get_platdata(dev);
+
+	status = alienware_wmi_command(pdata->wdev, WMAX_METHOD_HDMI_CABLE,
+				       &in_args, sizeof(in_args), &out_data);
+
  	if (ACPI_SUCCESS(status)) {
  		if (out_data == 0)
  			return sysfs_emit(buf, "[unconnected] connected unknown\n");
@@ -706,14 +710,17 @@ static ssize_t show_hdmi_cable(struct device *dev,
  static ssize_t show_hdmi_source(struct device *dev,
  				struct device_attribute *attr, char *buf)
  {
+	struct alienfx_platdata *pdata;
  	acpi_status status;
  	u32 out_data;
  	struct wmax_basic_args in_args = {
  		.arg = 0,
  	};
-	status =
-	    alienware_wmax_command(&in_args, sizeof(in_args),
-				   WMAX_METHOD_HDMI_STATUS, &out_data);
+
+	pdata = dev_get_platdata(dev);
+
+	status = alienware_wmi_command(pdata->wdev, WMAX_METHOD_HDMI_STATUS,
+				       &in_args, sizeof(in_args), &out_data);
 
  	if (ACPI_SUCCESS(status)) {
  		if (out_data == 1)
@@ -729,8 +736,12 @@ static ssize_t toggle_hdmi_source(struct device *dev,
  				  struct device_attribute *attr,
  				  const char *buf, size_t count)
  {
+	struct alienfx_platdata *pdata;
  	acpi_status status;
  	struct wmax_basic_args args;
+
+	pdata = dev_get_platdata(dev);
+
  	if (strcmp(buf, "gpu\n") == 0)
  		args.arg = 1;
  	else if (strcmp(buf, "input\n") == 0)
@@ -739,8 +750,8 @@ static ssize_t toggle_hdmi_source(struct device *dev,
  		args.arg = 3;
  	pr_debug("alienware-wmi: setting hdmi to %d : %s", args.arg, buf);
 
-	status = alienware_wmax_command(&args, sizeof(args),
-					WMAX_METHOD_HDMI_SOURCE, NULL);
+	status = alienware_wmi_command(pdata->wdev, WMAX_METHOD_HDMI_SOURCE,
+				       &args, sizeof(args), NULL);
 
  	if (ACPI_FAILURE(status))
  		pr_err("alienware-wmi: HDMI toggle failed: results: %u\n",
@@ -778,14 +789,17 @@ static const struct attribute_group hdmi_attribute_group = {
  static ssize_t show_amplifier_status(struct device *dev,
  				     struct device_attribute *attr, char *buf)
  {
+	struct alienfx_platdata *pdata;
  	acpi_status status;
  	u32 out_data;
  	struct wmax_basic_args in_args = {
  		.arg = 0,
  	};
-	status =
-	    alienware_wmax_command(&in_args, sizeof(in_args),
-				   WMAX_METHOD_AMPLIFIER_CABLE, &out_data);
+
+	pdata = dev_get_platdata(dev);
+
+	status = alienware_wmi_command(pdata->wdev, WMAX_METHOD_AMPLIFIER_CABLE,
+				       &in_args, sizeof(in_args), &out_data);
  	if (ACPI_SUCCESS(status)) {
  		if (out_data == 0)
  			return sysfs_emit(buf, "[unconnected] connected unknown\n");
@@ -822,13 +836,17 @@ static const struct attribute_group amplifier_attribute_group = {
  static ssize_t show_deepsleep_status(struct device *dev,
  				     struct device_attribute *attr, char *buf)
  {
+	struct alienfx_platdata *pdata;
  	acpi_status status;
  	u32 out_data;
  	struct wmax_basic_args in_args = {
  		.arg = 0,
  	};
-	status = alienware_wmax_command(&in_args, sizeof(in_args),
-					WMAX_METHOD_DEEP_SLEEP_STATUS, &out_data);
+
+	pdata = dev_get_platdata(dev);
+
+	status = alienware_wmi_command(pdata->wdev, WMAX_METHOD_DEEP_SLEEP_STATUS,
+				       &in_args, sizeof(in_args), &out_data);
  	if (ACPI_SUCCESS(status)) {
  		if (out_data == 0)
  			return sysfs_emit(buf, "[disabled] s5 s5_s4\n");
@@ -845,9 +863,12 @@ static ssize_t toggle_deepsleep(struct device *dev,
  				struct device_attribute *attr,
  				const char *buf, size_t count)
  {
+	struct alienfx_platdata *pdata;
  	acpi_status status;
  	struct wmax_basic_args args;
 
+	pdata = dev_get_platdata(dev);
+
  	if (strcmp(buf, "disabled\n") == 0)
  		args.arg = 0;
  	else if (strcmp(buf, "s5\n") == 0)
@@ -856,8 +877,8 @@ static ssize_t toggle_deepsleep(struct device *dev,
  		args.arg = 2;
  	pr_debug("alienware-wmi: setting deep sleep to %d : %s", args.arg, buf);
 
-	status = alienware_wmax_command(&args, sizeof(args),
-					WMAX_METHOD_DEEP_SLEEP_CONTROL, NULL);
+	status = alienware_wmi_command(pdata->wdev, WMAX_METHOD_DEEP_SLEEP_CONTROL,
+				       &args, sizeof(args), NULL);
 
  	if (ACPI_FAILURE(status))
  		pr_err("alienware-wmi: deep sleep control failed: results: %u\n",
author maintainer
#32 lore raw

PATCH 12/20 alienware-wmi: Refactor thermal control methods

In reply to Kurt Borja

Refactor thermal control methods to use alienware_wmi_command() instead of alienware_wmax_command().

Drop alienware_wmax_command() as there is no more users left.

---
 drivers/platform/x86/dell/alienware-wmi.c | 69 ++++++++---------------
 1 file changed, 23 insertions(+), 46 deletions(-)
drivers/platform/x86/dell/alienware-wmi.c +23 -46
index b9da5fe657a9..0a0b72dc61ea 100644
@@ -650,34 +650,6 @@ static enum led_brightness global_led_get(struct led_classdev *led_cdev)
 	return priv->global_brightness;
 }
 
-static acpi_status alienware_wmax_command(void *in_args, size_t in_size,
-					  u32 command, u32 *out_data)
-{
-	acpi_status status;
-	union acpi_object *obj;
-	struct acpi_buffer input;
-	struct acpi_buffer output;
-
-	input.length = in_size;
-	input.pointer = in_args;
-	if (out_data) {
-		output.length = ACPI_ALLOCATE_BUFFER;
-		output.pointer = NULL;
-		status = wmi_evaluate_method(WMAX_CONTROL_GUID, 0,
-					     command, &input, &output);
-		if (ACPI_SUCCESS(status)) {
-			obj = (union acpi_object *)output.pointer;
-			if (obj && obj->type == ACPI_TYPE_INTEGER)
-				*out_data = (u32)obj->integer.value;
-		}
-		kfree(output.pointer);
-	} else {
-		status = wmi_evaluate_method(WMAX_CONTROL_GUID, 0,
-					     command, &input, NULL);
-	}
-	return status;
-}
-
 /*
  *	The HDMI mux sysfs node indicates the status of the HDMI input mux.
  *	It can toggle between standard system GPU output and HDMI input.
@@ -932,7 +904,8 @@ static bool is_wmax_thermal_code(u32 code)
 	return false;
 }
 
-static int wmax_thermal_information(u8 operation, u8 arg, u32 *out_data)
+static int wmax_thermal_information(struct wmi_device *wdev, u8 operation,
+				    u8 arg, u32 *out_data)
 {
 	struct wmax_u32_args in_args = {
 		.operation = operation,
@@ -942,9 +915,8 @@ static int wmax_thermal_information(u8 operation, u8 arg, u32 *out_data)
 	};
 	acpi_status status;
 
-	status = alienware_wmax_command(&in_args, sizeof(in_args),
-					WMAX_METHOD_THERMAL_INFORMATION,
-					out_data);
+	status = alienware_wmi_command(wdev, WMAX_METHOD_THERMAL_INFORMATION,
+				       &in_args, sizeof(in_args), out_data);
 
 	if (ACPI_FAILURE(status))
 		return -EIO;
@@ -955,7 +927,7 @@ static int wmax_thermal_information(u8 operation, u8 arg, u32 *out_data)
 	return 0;
 }
 
-static int wmax_thermal_control(u8 profile)
+static int wmax_thermal_control(struct wmi_device *wdev, u8 profile)
 {
 	struct wmax_u32_args in_args = {
 		.operation = WMAX_OPERATION_ACTIVATE_PROFILE,
@@ -966,9 +938,8 @@ static int wmax_thermal_control(u8 profile)
 	acpi_status status;
 	u32 out_data;
 
-	status = alienware_wmax_command(&in_args, sizeof(in_args),
-					WMAX_METHOD_THERMAL_CONTROL,
-					&out_data);
+	status = alienware_wmi_command(wdev, WMAX_METHOD_THERMAL_CONTROL,
+				       &in_args, sizeof(in_args), &out_data);
 
 	if (ACPI_FAILURE(status))
 		return -EIO;
@@ -979,7 +950,8 @@ static int wmax_thermal_control(u8 profile)
 	return 0;
 }
 
-static int wmax_game_shift_status(u8 operation, u32 *out_data)
+static int wmax_game_shift_status(struct wmi_device *wdev, u8 operation,
+				  u32 *out_data)
 {
 	struct wmax_u32_args in_args = {
 		.operation = operation,
@@ -989,9 +961,8 @@ static int wmax_game_shift_status(u8 operation, u32 *out_data)
 	};
 	acpi_status status;
 
-	status = alienware_wmax_command(&in_args, sizeof(in_args),
-					WMAX_METHOD_GAME_SHIFT_STATUS,
-					out_data);
+	status = alienware_wmi_command(wdev, WMAX_METHOD_GAME_SHIFT_STATUS,
+				       &in_args, sizeof(in_args), out_data);
 
 	if (ACPI_FAILURE(status))
 		return -EIO;
@@ -1005,10 +976,13 @@ static int wmax_game_shift_status(u8 operation, u32 *out_data)
 static int thermal_profile_get(struct platform_profile_handler *pprof,
 			       enum platform_profile_option *profile)
 {
+	struct awcc_priv *priv;
 	u32 out_data;
 	int ret;
 
-	ret = wmax_thermal_information(WMAX_OPERATION_CURRENT_PROFILE,
+	priv = container_of(pprof, struct awcc_priv, pp_handler);
+
+	ret = wmax_thermal_information(priv->wdev, WMAX_OPERATION_CURRENT_PROFILE,
 				       0, &out_data);
 
 	if (ret < 0)
@@ -1039,7 +1013,8 @@ static int thermal_profile_set(struct platform_profile_handler *pprof,
 		u32 gmode_status;
 		int ret;
 
-		ret = wmax_game_shift_status(WMAX_OPERATION_GET_GAME_SHIFT_STATUS,
+		ret = wmax_game_shift_status(priv->wdev,
+					     WMAX_OPERATION_GET_GAME_SHIFT_STATUS,
 					     &gmode_status);
 
 		if (ret < 0)
@@ -1047,7 +1022,8 @@ static int thermal_profile_set(struct platform_profile_handler *pprof,
 
 		if ((profile == PLATFORM_PROFILE_PERFORMANCE && !gmode_status) ||
 		    (profile != PLATFORM_PROFILE_PERFORMANCE && gmode_status)) {
-			ret = wmax_game_shift_status(WMAX_OPERATION_TOGGLE_GAME_SHIFT,
+			ret = wmax_game_shift_status(priv->wdev,
+						     WMAX_OPERATION_TOGGLE_GAME_SHIFT,
 						     &gmode_status);
 
 			if (ret < 0)
@@ -1055,7 +1031,8 @@ static int thermal_profile_set(struct platform_profile_handler *pprof,
 		}
 	}
 
-	return wmax_thermal_control(priv->supported_thermal_profiles[profile]);
+	return wmax_thermal_control(priv->wdev,
+				    priv->supported_thermal_profiles[profile]);
 }
 
 static int create_thermal_profile(struct wmi_device *wdev)
@@ -1070,7 +1047,7 @@ static int create_thermal_profile(struct wmi_device *wdev)
 
 	priv = dev_get_drvdata(&wdev->dev);
 
-	ret = wmax_thermal_information(WMAX_OPERATION_SYS_DESCRIPTION,
+	ret = wmax_thermal_information(wdev, WMAX_OPERATION_SYS_DESCRIPTION,
 				       0, (u32 *) &sys_desc);
 	if (ret < 0)
 		return ret;
@@ -1078,7 +1055,7 @@ static int create_thermal_profile(struct wmi_device *wdev)
 	first_mode = sys_desc[0] + sys_desc[1];
 
 	for (u32 i = 0; i < sys_desc[3]; i++) {
-		ret = wmax_thermal_information(WMAX_OPERATION_LIST_IDS,
+		ret = wmax_thermal_information(wdev, WMAX_OPERATION_LIST_IDS,
 					       i + first_mode, &out_data);
 
 		if (ret == -EIO)
Signature · 1 line
2.47.1
Reviewed-by on v1 12/20
#33 lore raw

Re: [PATCH 12/20] alienware-wmi: Refactor thermal control methods

Am 21.12.24 um 06:59 schrieb Kurt Borja:

Quoted 4 lines

Refactor thermal control methods to use alienware_wmi_command() instead of alienware_wmax_command().

Drop alienware_wmax_command() as there is no more users left.

Quoted 173 lines
---
  drivers/platform/x86/dell/alienware-wmi.c | 69 ++++++++---------------
  1 file changed, 23 insertions(+), 46 deletions(-)
drivers/platform/x86/dell/alienware-wmi.c +23 -46
index b9da5fe657a9..0a0b72dc61ea 100644
@@ -650,34 +650,6 @@ static enum led_brightness global_led_get(struct led_classdev *led_cdev)
  	return priv->global_brightness;
  }
 
-static acpi_status alienware_wmax_command(void *in_args, size_t in_size,
-					  u32 command, u32 *out_data)
-{
-	acpi_status status;
-	union acpi_object *obj;
-	struct acpi_buffer input;
-	struct acpi_buffer output;
-
-	input.length = in_size;
-	input.pointer = in_args;
-	if (out_data) {
-		output.length = ACPI_ALLOCATE_BUFFER;
-		output.pointer = NULL;
-		status = wmi_evaluate_method(WMAX_CONTROL_GUID, 0,
-					     command, &input, &output);
-		if (ACPI_SUCCESS(status)) {
-			obj = (union acpi_object *)output.pointer;
-			if (obj && obj->type == ACPI_TYPE_INTEGER)
-				*out_data = (u32)obj->integer.value;
-		}
-		kfree(output.pointer);
-	} else {
-		status = wmi_evaluate_method(WMAX_CONTROL_GUID, 0,
-					     command, &input, NULL);
-	}
-	return status;
-}
-
  /*
   *	The HDMI mux sysfs node indicates the status of the HDMI input mux.
   *	It can toggle between standard system GPU output and HDMI input.
@@ -932,7 +904,8 @@ static bool is_wmax_thermal_code(u32 code)
  	return false;
  }
 
-static int wmax_thermal_information(u8 operation, u8 arg, u32 *out_data)
+static int wmax_thermal_information(struct wmi_device *wdev, u8 operation,
+				    u8 arg, u32 *out_data)
  {
  	struct wmax_u32_args in_args = {
  		.operation = operation,
@@ -942,9 +915,8 @@ static int wmax_thermal_information(u8 operation, u8 arg, u32 *out_data)
  	};
  	acpi_status status;
 
-	status = alienware_wmax_command(&in_args, sizeof(in_args),
-					WMAX_METHOD_THERMAL_INFORMATION,
-					out_data);
+	status = alienware_wmi_command(wdev, WMAX_METHOD_THERMAL_INFORMATION,
+				       &in_args, sizeof(in_args), out_data);
 
  	if (ACPI_FAILURE(status))
  		return -EIO;
@@ -955,7 +927,7 @@ static int wmax_thermal_information(u8 operation, u8 arg, u32 *out_data)
  	return 0;
  }
 
-static int wmax_thermal_control(u8 profile)
+static int wmax_thermal_control(struct wmi_device *wdev, u8 profile)
  {
  	struct wmax_u32_args in_args = {
  		.operation = WMAX_OPERATION_ACTIVATE_PROFILE,
@@ -966,9 +938,8 @@ static int wmax_thermal_control(u8 profile)
  	acpi_status status;
  	u32 out_data;
 
-	status = alienware_wmax_command(&in_args, sizeof(in_args),
-					WMAX_METHOD_THERMAL_CONTROL,
-					&out_data);
+	status = alienware_wmi_command(wdev, WMAX_METHOD_THERMAL_CONTROL,
+				       &in_args, sizeof(in_args), &out_data);
 
  	if (ACPI_FAILURE(status))
  		return -EIO;
@@ -979,7 +950,8 @@ static int wmax_thermal_control(u8 profile)
  	return 0;
  }
 
-static int wmax_game_shift_status(u8 operation, u32 *out_data)
+static int wmax_game_shift_status(struct wmi_device *wdev, u8 operation,
+				  u32 *out_data)
  {
  	struct wmax_u32_args in_args = {
  		.operation = operation,
@@ -989,9 +961,8 @@ static int wmax_game_shift_status(u8 operation, u32 *out_data)
  	};
  	acpi_status status;
 
-	status = alienware_wmax_command(&in_args, sizeof(in_args),
-					WMAX_METHOD_GAME_SHIFT_STATUS,
-					out_data);
+	status = alienware_wmi_command(wdev, WMAX_METHOD_GAME_SHIFT_STATUS,
+				       &in_args, sizeof(in_args), out_data);
 
  	if (ACPI_FAILURE(status))
  		return -EIO;
@@ -1005,10 +976,13 @@ static int wmax_game_shift_status(u8 operation, u32 *out_data)
  static int thermal_profile_get(struct platform_profile_handler *pprof,
  			       enum platform_profile_option *profile)
  {
+	struct awcc_priv *priv;
  	u32 out_data;
  	int ret;
 
-	ret = wmax_thermal_information(WMAX_OPERATION_CURRENT_PROFILE,
+	priv = container_of(pprof, struct awcc_priv, pp_handler);
+
+	ret = wmax_thermal_information(priv->wdev, WMAX_OPERATION_CURRENT_PROFILE,
  				       0, &out_data);
 
  	if (ret < 0)
@@ -1039,7 +1013,8 @@ static int thermal_profile_set(struct platform_profile_handler *pprof,
  		u32 gmode_status;
  		int ret;
 
-		ret = wmax_game_shift_status(WMAX_OPERATION_GET_GAME_SHIFT_STATUS,
+		ret = wmax_game_shift_status(priv->wdev,
+					     WMAX_OPERATION_GET_GAME_SHIFT_STATUS,
  					     &gmode_status);
 
  		if (ret < 0)
@@ -1047,7 +1022,8 @@ static int thermal_profile_set(struct platform_profile_handler *pprof,
 
  		if ((profile == PLATFORM_PROFILE_PERFORMANCE && !gmode_status) ||
  		    (profile != PLATFORM_PROFILE_PERFORMANCE && gmode_status)) {
-			ret = wmax_game_shift_status(WMAX_OPERATION_TOGGLE_GAME_SHIFT,
+			ret = wmax_game_shift_status(priv->wdev,
+						     WMAX_OPERATION_TOGGLE_GAME_SHIFT,
  						     &gmode_status);
 
  			if (ret < 0)
@@ -1055,7 +1031,8 @@ static int thermal_profile_set(struct platform_profile_handler *pprof,
  		}
  	}
 
-	return wmax_thermal_control(priv->supported_thermal_profiles[profile]);
+	return wmax_thermal_control(priv->wdev,
+				    priv->supported_thermal_profiles[profile]);
  }
 
  static int create_thermal_profile(struct wmi_device *wdev)
@@ -1070,7 +1047,7 @@ static int create_thermal_profile(struct wmi_device *wdev)
 
  	priv = dev_get_drvdata(&wdev->dev);
 
-	ret = wmax_thermal_information(WMAX_OPERATION_SYS_DESCRIPTION,
+	ret = wmax_thermal_information(wdev, WMAX_OPERATION_SYS_DESCRIPTION,
  				       0, (u32 *) &sys_desc);
  	if (ret < 0)
  		return ret;
@@ -1078,7 +1055,7 @@ static int create_thermal_profile(struct wmi_device *wdev)
  	first_mode = sys_desc[0] + sys_desc[1];
 
  	for (u32 i = 0; i < sys_desc[3]; i++) {
-		ret = wmax_thermal_information(WMAX_OPERATION_LIST_IDS,
+		ret = wmax_thermal_information(wdev, WMAX_OPERATION_LIST_IDS,
  					       i + first_mode, &out_data);
 
  		if (ret == -EIO)
author maintainer
#34 lore raw

PATCH 13/20 alienware-wmi: Split DMI table

In reply to Kurt Borja

Split thermal features into a new DMI table to support upcoming file split.

---
 drivers/platform/x86/dell/alienware-wmi.c | 163 +++++++++-------------
 1 file changed, 69 insertions(+), 94 deletions(-)
drivers/platform/x86/dell/alienware-wmi.c +69 -94
index 0a0b72dc61ea..8ea08f5f8810 100644
@@ -118,8 +118,6 @@ struct quirk_entry {
 	u8 hdmi_mux;
 	u8 amplifier;
 	u8 deepslp;
-	bool thermal;
-	bool gmode;
 };
 
 static struct quirk_entry *quirks;
@@ -130,8 +128,6 @@ static struct quirk_entry quirk_inspiron5675 = {
 	.hdmi_mux = 0,
 	.amplifier = 0,
 	.deepslp = 0,
-	.thermal = false,
-	.gmode = false,
 };
 
 static struct quirk_entry quirk_unknown = {
@@ -139,8 +135,6 @@ static struct quirk_entry quirk_unknown = {
 	.hdmi_mux = 0,
 	.amplifier = 0,
 	.deepslp = 0,
-	.thermal = false,
-	.gmode = false,
 };
 
 static struct quirk_entry quirk_x51_r1_r2 = {
@@ -148,8 +142,6 @@ static struct quirk_entry quirk_x51_r1_r2 = {
 	.hdmi_mux = 0,
 	.amplifier = 0,
 	.deepslp = 0,
-	.thermal = false,
-	.gmode = false,
 };
 
 static struct quirk_entry quirk_x51_r3 = {
@@ -157,8 +149,6 @@ static struct quirk_entry quirk_x51_r3 = {
 	.hdmi_mux = 0,
 	.amplifier = 1,
 	.deepslp = 0,
-	.thermal = false,
-	.gmode = false,
 };
 
 static struct quirk_entry quirk_asm100 = {
@@ -166,8 +156,6 @@ static struct quirk_entry quirk_asm100 = {
 	.hdmi_mux = 1,
 	.amplifier = 0,
 	.deepslp = 0,
-	.thermal = false,
-	.gmode = false,
 };
 
 static struct quirk_entry quirk_asm200 = {
@@ -175,8 +163,6 @@ static struct quirk_entry quirk_asm200 = {
 	.hdmi_mux = 1,
 	.amplifier = 0,
 	.deepslp = 1,
-	.thermal = false,
-	.gmode = false,
 };
 
 static struct quirk_entry quirk_asm201 = {
@@ -184,26 +170,6 @@ static struct quirk_entry quirk_asm201 = {
 	.hdmi_mux = 1,
 	.amplifier = 1,
 	.deepslp = 1,
-	.thermal = false,
-	.gmode = false,
-};
-
-static struct quirk_entry quirk_g_series = {
-	.num_zones = 2,
-	.hdmi_mux = 0,
-	.amplifier = 0,
-	.deepslp = 0,
-	.thermal = true,
-	.gmode = true,
-};
-
-static struct quirk_entry quirk_x_series = {
-	.num_zones = 2,
-	.hdmi_mux = 0,
-	.amplifier = 0,
-	.deepslp = 0,
-	.thermal = true,
-	.gmode = false,
 };
 
 static int __init dmi_matched(const struct dmi_system_id *dmi)
@@ -242,133 +208,140 @@ static const struct dmi_system_id alienware_quirks[] __initconst = {
 	},
 	{
 		.callback = dmi_matched,
-		.ident = "Alienware m17 R5",
+		.ident = "Alienware X51 R1",
 		.matches = {
 			DMI_MATCH(DMI_SYS_VENDOR, "Alienware"),
-			DMI_MATCH(DMI_PRODUCT_NAME, "Alienware m17 R5 AMD"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "Alienware X51"),
 		},
-		.driver_data = &quirk_x_series,
+		.driver_data = &quirk_x51_r1_r2,
 	},
 	{
 		.callback = dmi_matched,
-		.ident = "Alienware m18 R2",
+		.ident = "Alienware X51 R2",
 		.matches = {
 			DMI_MATCH(DMI_SYS_VENDOR, "Alienware"),
-			DMI_MATCH(DMI_PRODUCT_NAME, "Alienware m18 R2"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "Alienware X51 R2"),
 		},
-		.driver_data = &quirk_x_series,
+		.driver_data = &quirk_x51_r1_r2,
 	},
 	{
 		.callback = dmi_matched,
-		.ident = "Alienware x15 R1",
+		.ident = "Alienware X51 R3",
 		.matches = {
 			DMI_MATCH(DMI_SYS_VENDOR, "Alienware"),
-			DMI_MATCH(DMI_PRODUCT_NAME, "Alienware x15 R1"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "Alienware X51 R3"),
 		},
-		.driver_data = &quirk_x_series,
+		.driver_data = &quirk_x51_r3,
 	},
 	{
 		.callback = dmi_matched,
-		.ident = "Alienware x17 R2",
+		.ident = "Dell Inc. Inspiron 5675",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
+			DMI_MATCH(DMI_PRODUCT_NAME, "Inspiron 5675"),
+		},
+		.driver_data = &quirk_inspiron5675,
+	},
+	{}
+};
+
+struct awcc_features {
+	bool gmode;
+};
+
+static struct awcc_features g_series_features = {
+	.gmode = true,
+};
+
+static struct awcc_features x_series_features = {
+	.gmode = false,
+};
+
+static const struct dmi_system_id awcc_dmi_table[] __initconst = {
+	{
+		.ident = "Alienware m17 R5",
 		.matches = {
 			DMI_MATCH(DMI_SYS_VENDOR, "Alienware"),
-			DMI_MATCH(DMI_PRODUCT_NAME, "Alienware x17 R2"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "Alienware m17 R5 AMD"),
 		},
-		.driver_data = &quirk_x_series,
+		.driver_data = &x_series_features,
 	},
 	{
-		.callback = dmi_matched,
-		.ident = "Alienware X51 R1",
+		.ident = "Alienware m18 R2",
 		.matches = {
 			DMI_MATCH(DMI_SYS_VENDOR, "Alienware"),
-			DMI_MATCH(DMI_PRODUCT_NAME, "Alienware X51"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "Alienware m18 R2"),
 		},
-		.driver_data = &quirk_x51_r1_r2,
+		.driver_data = &x_series_features,
 	},
 	{
-		.callback = dmi_matched,
-		.ident = "Alienware X51 R2",
+		.ident = "Alienware x15 R1",
 		.matches = {
 			DMI_MATCH(DMI_SYS_VENDOR, "Alienware"),
-			DMI_MATCH(DMI_PRODUCT_NAME, "Alienware X51 R2"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "Alienware x15 R1"),
 		},
-		.driver_data = &quirk_x51_r1_r2,
+		.driver_data = &x_series_features,
 	},
 	{
-		.callback = dmi_matched,
-		.ident = "Alienware X51 R3",
+		.ident = "Alienware x17 R2",
 		.matches = {
 			DMI_MATCH(DMI_SYS_VENDOR, "Alienware"),
-			DMI_MATCH(DMI_PRODUCT_NAME, "Alienware X51 R3"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "Alienware x17 R2"),
 		},
-		.driver_data = &quirk_x51_r3,
+		.driver_data = &x_series_features,
 	},
 	{
-		.callback = dmi_matched,
 		.ident = "Dell Inc. G15 5510",
 		.matches = {
 			DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
 			DMI_MATCH(DMI_PRODUCT_NAME, "Dell G15 5510"),
 		},
-		.driver_data = &quirk_g_series,
+		.driver_data = &g_series_features,
 	},
 	{
-		.callback = dmi_matched,
 		.ident = "Dell Inc. G15 5511",
 		.matches = {
 			DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
 			DMI_MATCH(DMI_PRODUCT_NAME, "Dell G15 5511"),
 		},
-		.driver_data = &quirk_g_series,
+		.driver_data = &g_series_features,
 	},
 	{
-		.callback = dmi_matched,
 		.ident = "Dell Inc. G15 5515",
 		.matches = {
 			DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
 			DMI_MATCH(DMI_PRODUCT_NAME, "Dell G15 5515"),
 		},
-		.driver_data = &quirk_g_series,
+		.driver_data = &g_series_features,
 	},
 	{
-		.callback = dmi_matched,
 		.ident = "Dell Inc. G3 3500",
 		.matches = {
 			DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
 			DMI_MATCH(DMI_PRODUCT_NAME, "G3 3500"),
 		},
-		.driver_data = &quirk_g_series,
+		.driver_data = &g_series_features,
 	},
 	{
-		.callback = dmi_matched,
 		.ident = "Dell Inc. G3 3590",
 		.matches = {
 			DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
 			DMI_MATCH(DMI_PRODUCT_NAME, "G3 3590"),
 		},
-		.driver_data = &quirk_g_series,
+		.driver_data = &g_series_features,
 	},
 	{
-		.callback = dmi_matched,
 		.ident = "Dell Inc. G5 5500",
 		.matches = {
 			DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
 			DMI_MATCH(DMI_PRODUCT_NAME, "G5 5500"),
 		},
-		.driver_data = &quirk_g_series,
-	},
-	{
-		.callback = dmi_matched,
-		.ident = "Dell Inc. Inspiron 5675",
-		.matches = {
-			DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
-			DMI_MATCH(DMI_PRODUCT_NAME, "Inspiron 5675"),
-		},
-		.driver_data = &quirk_inspiron5675,
+		.driver_data = &g_series_features,
 	},
-	{}
 };
 
+struct awcc_features *awcc;
+
 struct color_platform {
 	u8 blue;
 	u8 green;
@@ -1009,7 +982,7 @@ static int thermal_profile_set(struct platform_profile_handler *pprof,
 
 	priv = container_of(pprof, struct awcc_priv, pp_handler);
 
-	if (quirks->gmode) {
+	if (awcc->gmode) {
 		u32 gmode_status;
 		int ret;
 
@@ -1077,7 +1050,7 @@ static int create_thermal_profile(struct wmi_device *wdev)
 	if (bitmap_empty(priv->pp_handler.choices, PLATFORM_PROFILE_LAST))
 		return -ENODEV;
 
-	if (quirks->gmode) {
+	if (awcc->gmode) {
 		priv->supported_thermal_profiles[PLATFORM_PROFILE_PERFORMANCE] =
 			WMAX_THERMAL_MODE_GMODE;
 
@@ -1328,7 +1301,7 @@ static int wmax_wmi_probe(struct wmi_device *wdev, const void *context)
 	};
 	int ret = 0;
 
-	if (quirks->thermal)
+	if (awcc)
 		ret = alienware_awcc_setup(wdev);
 	else
 		ret = alienware_alienfx_setup(&pdata);
@@ -1338,7 +1311,7 @@ static int wmax_wmi_probe(struct wmi_device *wdev, const void *context)
 
 static void wmax_wmi_remove(struct wmi_device *wdev)
 {
-	if (quirks->thermal)
+	if (awcc)
 		alienware_awcc_exit(wdev);
 	else
 		alienware_alienfx_exit(wdev);
@@ -1362,6 +1335,18 @@ static struct wmi_driver alienware_wmax_wmi_driver = {
 
 static int __init alienware_wmax_wmi_init(void)
 {
+	const struct dmi_system_id *id;
+
+	id = dmi_first_match(awcc_dmi_table);
+	if (id)
+		awcc = id->driver_data;
+
+	if (force_platform_profile)
+		awcc = &x_series_features;
+
+	if (force_gmode)
+		awcc = &g_series_features;
+
 	return wmi_driver_register(&alienware_wmax_wmi_driver);
 }
 
@@ -1378,16 +1363,6 @@ static int __init alienware_wmi_init(void)
 	if (quirks == NULL)
 		quirks = &quirk_unknown;
 
-	if (force_platform_profile)
-		quirks->thermal = true;
-
-	if (force_gmode) {
-		if (quirks->thermal)
-			quirks->gmode = true;
-		else
-			pr_warn("force_gmode requires platform profile support\n");
-	}
-
 	if (wmi_has_guid(WMAX_CONTROL_GUID)) {
 		interface = WMAX;
 		ret = alienware_wmax_wmi_init();
Signature · 1 line
2.47.1
#35 lore raw

Re: [PATCH 13/20] alienware-wmi: Split DMI table

Am 21.12.24 um 06:59 schrieb Kurt Borja:

Quoted 2 lines

Split thermal features into a new DMI table to support upcoming file split.

Could it be that you also decided to reorder the quirk entries?

Thanks,
Armin WOlf

Quoted 359 lines
---
  drivers/platform/x86/dell/alienware-wmi.c | 163 +++++++++-------------
  1 file changed, 69 insertions(+), 94 deletions(-)
drivers/platform/x86/dell/alienware-wmi.c +69 -94
index 0a0b72dc61ea..8ea08f5f8810 100644
@@ -118,8 +118,6 @@ struct quirk_entry {
  	u8 hdmi_mux;
  	u8 amplifier;
  	u8 deepslp;
-	bool thermal;
-	bool gmode;
  };
 
  static struct quirk_entry *quirks;
@@ -130,8 +128,6 @@ static struct quirk_entry quirk_inspiron5675 = {
  	.hdmi_mux = 0,
  	.amplifier = 0,
  	.deepslp = 0,
-	.thermal = false,
-	.gmode = false,
  };
 
  static struct quirk_entry quirk_unknown = {
@@ -139,8 +135,6 @@ static struct quirk_entry quirk_unknown = {
  	.hdmi_mux = 0,
  	.amplifier = 0,
  	.deepslp = 0,
-	.thermal = false,
-	.gmode = false,
  };
 
  static struct quirk_entry quirk_x51_r1_r2 = {
@@ -148,8 +142,6 @@ static struct quirk_entry quirk_x51_r1_r2 = {
  	.hdmi_mux = 0,
  	.amplifier = 0,
  	.deepslp = 0,
-	.thermal = false,
-	.gmode = false,
  };
 
  static struct quirk_entry quirk_x51_r3 = {
@@ -157,8 +149,6 @@ static struct quirk_entry quirk_x51_r3 = {
  	.hdmi_mux = 0,
  	.amplifier = 1,
  	.deepslp = 0,
-	.thermal = false,
-	.gmode = false,
  };
 
  static struct quirk_entry quirk_asm100 = {
@@ -166,8 +156,6 @@ static struct quirk_entry quirk_asm100 = {
  	.hdmi_mux = 1,
  	.amplifier = 0,
  	.deepslp = 0,
-	.thermal = false,
-	.gmode = false,
  };
 
  static struct quirk_entry quirk_asm200 = {
@@ -175,8 +163,6 @@ static struct quirk_entry quirk_asm200 = {
  	.hdmi_mux = 1,
  	.amplifier = 0,
  	.deepslp = 1,
-	.thermal = false,
-	.gmode = false,
  };
 
  static struct quirk_entry quirk_asm201 = {
@@ -184,26 +170,6 @@ static struct quirk_entry quirk_asm201 = {
  	.hdmi_mux = 1,
  	.amplifier = 1,
  	.deepslp = 1,
-	.thermal = false,
-	.gmode = false,
-};
-
-static struct quirk_entry quirk_g_series = {
-	.num_zones = 2,
-	.hdmi_mux = 0,
-	.amplifier = 0,
-	.deepslp = 0,
-	.thermal = true,
-	.gmode = true,
-};
-
-static struct quirk_entry quirk_x_series = {
-	.num_zones = 2,
-	.hdmi_mux = 0,
-	.amplifier = 0,
-	.deepslp = 0,
-	.thermal = true,
-	.gmode = false,
  };
 
  static int __init dmi_matched(const struct dmi_system_id *dmi)
@@ -242,133 +208,140 @@ static const struct dmi_system_id alienware_quirks[] __initconst = {
  	},
  	{
  		.callback = dmi_matched,
-		.ident = "Alienware m17 R5",
+		.ident = "Alienware X51 R1",
  		.matches = {
  			DMI_MATCH(DMI_SYS_VENDOR, "Alienware"),
-			DMI_MATCH(DMI_PRODUCT_NAME, "Alienware m17 R5 AMD"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "Alienware X51"),
  		},
-		.driver_data = &quirk_x_series,
+		.driver_data = &quirk_x51_r1_r2,
  	},
  	{
  		.callback = dmi_matched,
-		.ident = "Alienware m18 R2",
+		.ident = "Alienware X51 R2",
  		.matches = {
  			DMI_MATCH(DMI_SYS_VENDOR, "Alienware"),
-			DMI_MATCH(DMI_PRODUCT_NAME, "Alienware m18 R2"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "Alienware X51 R2"),
  		},
-		.driver_data = &quirk_x_series,
+		.driver_data = &quirk_x51_r1_r2,
  	},
  	{
  		.callback = dmi_matched,
-		.ident = "Alienware x15 R1",
+		.ident = "Alienware X51 R3",
  		.matches = {
  			DMI_MATCH(DMI_SYS_VENDOR, "Alienware"),
-			DMI_MATCH(DMI_PRODUCT_NAME, "Alienware x15 R1"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "Alienware X51 R3"),
  		},
-		.driver_data = &quirk_x_series,
+		.driver_data = &quirk_x51_r3,
  	},
  	{
  		.callback = dmi_matched,
-		.ident = "Alienware x17 R2",
+		.ident = "Dell Inc. Inspiron 5675",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
+			DMI_MATCH(DMI_PRODUCT_NAME, "Inspiron 5675"),
+		},
+		.driver_data = &quirk_inspiron5675,
+	},
+	{}
+};
+
+struct awcc_features {
+	bool gmode;
+};
+
+static struct awcc_features g_series_features = {
+	.gmode = true,
+};
+
+static struct awcc_features x_series_features = {
+	.gmode = false,
+};
+
+static const struct dmi_system_id awcc_dmi_table[] __initconst = {
+	{
+		.ident = "Alienware m17 R5",
  		.matches = {
  			DMI_MATCH(DMI_SYS_VENDOR, "Alienware"),
-			DMI_MATCH(DMI_PRODUCT_NAME, "Alienware x17 R2"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "Alienware m17 R5 AMD"),
  		},
-		.driver_data = &quirk_x_series,
+		.driver_data = &x_series_features,
  	},
  	{
-		.callback = dmi_matched,
-		.ident = "Alienware X51 R1",
+		.ident = "Alienware m18 R2",
  		.matches = {
  			DMI_MATCH(DMI_SYS_VENDOR, "Alienware"),
-			DMI_MATCH(DMI_PRODUCT_NAME, "Alienware X51"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "Alienware m18 R2"),
  		},
-		.driver_data = &quirk_x51_r1_r2,
+		.driver_data = &x_series_features,
  	},
  	{
-		.callback = dmi_matched,
-		.ident = "Alienware X51 R2",
+		.ident = "Alienware x15 R1",
  		.matches = {
  			DMI_MATCH(DMI_SYS_VENDOR, "Alienware"),
-			DMI_MATCH(DMI_PRODUCT_NAME, "Alienware X51 R2"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "Alienware x15 R1"),
  		},
-		.driver_data = &quirk_x51_r1_r2,
+		.driver_data = &x_series_features,
  	},
  	{
-		.callback = dmi_matched,
-		.ident = "Alienware X51 R3",
+		.ident = "Alienware x17 R2",
  		.matches = {
  			DMI_MATCH(DMI_SYS_VENDOR, "Alienware"),
-			DMI_MATCH(DMI_PRODUCT_NAME, "Alienware X51 R3"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "Alienware x17 R2"),
  		},
-		.driver_data = &quirk_x51_r3,
+		.driver_data = &x_series_features,
  	},
  	{
-		.callback = dmi_matched,
  		.ident = "Dell Inc. G15 5510",
  		.matches = {
  			DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
  			DMI_MATCH(DMI_PRODUCT_NAME, "Dell G15 5510"),
  		},
-		.driver_data = &quirk_g_series,
+		.driver_data = &g_series_features,
  	},
  	{
-		.callback = dmi_matched,
  		.ident = "Dell Inc. G15 5511",
  		.matches = {
  			DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
  			DMI_MATCH(DMI_PRODUCT_NAME, "Dell G15 5511"),
  		},
-		.driver_data = &quirk_g_series,
+		.driver_data = &g_series_features,
  	},
  	{
-		.callback = dmi_matched,
  		.ident = "Dell Inc. G15 5515",
  		.matches = {
  			DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
  			DMI_MATCH(DMI_PRODUCT_NAME, "Dell G15 5515"),
  		},
-		.driver_data = &quirk_g_series,
+		.driver_data = &g_series_features,
  	},
  	{
-		.callback = dmi_matched,
  		.ident = "Dell Inc. G3 3500",
  		.matches = {
  			DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
  			DMI_MATCH(DMI_PRODUCT_NAME, "G3 3500"),
  		},
-		.driver_data = &quirk_g_series,
+		.driver_data = &g_series_features,
  	},
  	{
-		.callback = dmi_matched,
  		.ident = "Dell Inc. G3 3590",
  		.matches = {
  			DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
  			DMI_MATCH(DMI_PRODUCT_NAME, "G3 3590"),
  		},
-		.driver_data = &quirk_g_series,
+		.driver_data = &g_series_features,
  	},
  	{
-		.callback = dmi_matched,
  		.ident = "Dell Inc. G5 5500",
  		.matches = {
  			DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
  			DMI_MATCH(DMI_PRODUCT_NAME, "G5 5500"),
  		},
-		.driver_data = &quirk_g_series,
-	},
-	{
-		.callback = dmi_matched,
-		.ident = "Dell Inc. Inspiron 5675",
-		.matches = {
-			DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
-			DMI_MATCH(DMI_PRODUCT_NAME, "Inspiron 5675"),
-		},
-		.driver_data = &quirk_inspiron5675,
+		.driver_data = &g_series_features,
  	},
-	{}
  };
 
+struct awcc_features *awcc;
+
  struct color_platform {
  	u8 blue;
  	u8 green;
@@ -1009,7 +982,7 @@ static int thermal_profile_set(struct platform_profile_handler *pprof,
 
  	priv = container_of(pprof, struct awcc_priv, pp_handler);
 
-	if (quirks->gmode) {
+	if (awcc->gmode) {
  		u32 gmode_status;
  		int ret;
 
@@ -1077,7 +1050,7 @@ static int create_thermal_profile(struct wmi_device *wdev)
  	if (bitmap_empty(priv->pp_handler.choices, PLATFORM_PROFILE_LAST))
  		return -ENODEV;
 
-	if (quirks->gmode) {
+	if (awcc->gmode) {
  		priv->supported_thermal_profiles[PLATFORM_PROFILE_PERFORMANCE] =
  			WMAX_THERMAL_MODE_GMODE;
 
@@ -1328,7 +1301,7 @@ static int wmax_wmi_probe(struct wmi_device *wdev, const void *context)
  	};
  	int ret = 0;
 
-	if (quirks->thermal)
+	if (awcc)
  		ret = alienware_awcc_setup(wdev);
  	else
  		ret = alienware_alienfx_setup(&pdata);
@@ -1338,7 +1311,7 @@ static int wmax_wmi_probe(struct wmi_device *wdev, const void *context)
 
  static void wmax_wmi_remove(struct wmi_device *wdev)
  {
-	if (quirks->thermal)
+	if (awcc)
  		alienware_awcc_exit(wdev);
  	else
  		alienware_alienfx_exit(wdev);
@@ -1362,6 +1335,18 @@ static struct wmi_driver alienware_wmax_wmi_driver = {
 
  static int __init alienware_wmax_wmi_init(void)
  {
+	const struct dmi_system_id *id;
+
+	id = dmi_first_match(awcc_dmi_table);
+	if (id)
+		awcc = id->driver_data;
+
+	if (force_platform_profile)
+		awcc = &x_series_features;
+
+	if (force_gmode)
+		awcc = &g_series_features;
+
  	return wmi_driver_register(&alienware_wmax_wmi_driver);
  }
 
@@ -1378,16 +1363,6 @@ static int __init alienware_wmi_init(void)
  	if (quirks == NULL)
  		quirks = &quirk_unknown;
 
-	if (force_platform_profile)
-		quirks->thermal = true;
-
-	if (force_gmode) {
-		if (quirks->thermal)
-			quirks->gmode = true;
-		else
-			pr_warn("force_gmode requires platform profile support\n");
-	}
-
  	if (wmi_has_guid(WMAX_CONTROL_GUID)) {
  		interface = WMAX;
  		ret = alienware_wmax_wmi_init();
author maintainer
#36 lore raw

Re: [PATCH 13/20] alienware-wmi: Split DMI table

Quoted 6 lines · Armin Wolf

Am 21.12.24 um 06:59 schrieb Kurt Borja:

Quoted 2 lines

Split thermal features into a new DMI table to support upcoming file split.

Could it be that you also decided to reorder the quirk entries?

No. I'll make this split lower in the file, so it doesn't mess up the diff.

If I did reorder it by accident I will fix it.

Quoted 363 lines

Thanks,
Armin WOlf

Quoted 359 lines
---
  drivers/platform/x86/dell/alienware-wmi.c | 163 +++++++++-------------
  1 file changed, 69 insertions(+), 94 deletions(-)
drivers/platform/x86/dell/alienware-wmi.c +69 -94
index 0a0b72dc61ea..8ea08f5f8810 100644
@@ -118,8 +118,6 @@ struct quirk_entry {
  	u8 hdmi_mux;
  	u8 amplifier;
  	u8 deepslp;
-	bool thermal;
-	bool gmode;
  };
 
  static struct quirk_entry *quirks;
@@ -130,8 +128,6 @@ static struct quirk_entry quirk_inspiron5675 = {
  	.hdmi_mux = 0,
  	.amplifier = 0,
  	.deepslp = 0,
-	.thermal = false,
-	.gmode = false,
  };
 
  static struct quirk_entry quirk_unknown = {
@@ -139,8 +135,6 @@ static struct quirk_entry quirk_unknown = {
  	.hdmi_mux = 0,
  	.amplifier = 0,
  	.deepslp = 0,
-	.thermal = false,
-	.gmode = false,
  };
 
  static struct quirk_entry quirk_x51_r1_r2 = {
@@ -148,8 +142,6 @@ static struct quirk_entry quirk_x51_r1_r2 = {
  	.hdmi_mux = 0,
  	.amplifier = 0,
  	.deepslp = 0,
-	.thermal = false,
-	.gmode = false,
  };
 
  static struct quirk_entry quirk_x51_r3 = {
@@ -157,8 +149,6 @@ static struct quirk_entry quirk_x51_r3 = {
  	.hdmi_mux = 0,
  	.amplifier = 1,
  	.deepslp = 0,
-	.thermal = false,
-	.gmode = false,
  };
 
  static struct quirk_entry quirk_asm100 = {
@@ -166,8 +156,6 @@ static struct quirk_entry quirk_asm100 = {
  	.hdmi_mux = 1,
  	.amplifier = 0,
  	.deepslp = 0,
-	.thermal = false,
-	.gmode = false,
  };
 
  static struct quirk_entry quirk_asm200 = {
@@ -175,8 +163,6 @@ static struct quirk_entry quirk_asm200 = {
  	.hdmi_mux = 1,
  	.amplifier = 0,
  	.deepslp = 1,
-	.thermal = false,
-	.gmode = false,
  };
 
  static struct quirk_entry quirk_asm201 = {
@@ -184,26 +170,6 @@ static struct quirk_entry quirk_asm201 = {
  	.hdmi_mux = 1,
  	.amplifier = 1,
  	.deepslp = 1,
-	.thermal = false,
-	.gmode = false,
-};
-
-static struct quirk_entry quirk_g_series = {
-	.num_zones = 2,
-	.hdmi_mux = 0,
-	.amplifier = 0,
-	.deepslp = 0,
-	.thermal = true,
-	.gmode = true,
-};
-
-static struct quirk_entry quirk_x_series = {
-	.num_zones = 2,
-	.hdmi_mux = 0,
-	.amplifier = 0,
-	.deepslp = 0,
-	.thermal = true,
-	.gmode = false,
  };
 
  static int __init dmi_matched(const struct dmi_system_id *dmi)
@@ -242,133 +208,140 @@ static const struct dmi_system_id alienware_quirks[] __initconst = {
  	},
  	{
  		.callback = dmi_matched,
-		.ident = "Alienware m17 R5",
+		.ident = "Alienware X51 R1",
  		.matches = {
  			DMI_MATCH(DMI_SYS_VENDOR, "Alienware"),
-			DMI_MATCH(DMI_PRODUCT_NAME, "Alienware m17 R5 AMD"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "Alienware X51"),
  		},
-		.driver_data = &quirk_x_series,
+		.driver_data = &quirk_x51_r1_r2,
  	},
  	{
  		.callback = dmi_matched,
-		.ident = "Alienware m18 R2",
+		.ident = "Alienware X51 R2",
  		.matches = {
  			DMI_MATCH(DMI_SYS_VENDOR, "Alienware"),
-			DMI_MATCH(DMI_PRODUCT_NAME, "Alienware m18 R2"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "Alienware X51 R2"),
  		},
-		.driver_data = &quirk_x_series,
+		.driver_data = &quirk_x51_r1_r2,
  	},
  	{
  		.callback = dmi_matched,
-		.ident = "Alienware x15 R1",
+		.ident = "Alienware X51 R3",
  		.matches = {
  			DMI_MATCH(DMI_SYS_VENDOR, "Alienware"),
-			DMI_MATCH(DMI_PRODUCT_NAME, "Alienware x15 R1"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "Alienware X51 R3"),
  		},
-		.driver_data = &quirk_x_series,
+		.driver_data = &quirk_x51_r3,
  	},
  	{
  		.callback = dmi_matched,
-		.ident = "Alienware x17 R2",
+		.ident = "Dell Inc. Inspiron 5675",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
+			DMI_MATCH(DMI_PRODUCT_NAME, "Inspiron 5675"),
+		},
+		.driver_data = &quirk_inspiron5675,
+	},
+	{}
+};
+
+struct awcc_features {
+	bool gmode;
+};
+
+static struct awcc_features g_series_features = {
+	.gmode = true,
+};
+
+static struct awcc_features x_series_features = {
+	.gmode = false,
+};
+
+static const struct dmi_system_id awcc_dmi_table[] __initconst = {
+	{
+		.ident = "Alienware m17 R5",
  		.matches = {
  			DMI_MATCH(DMI_SYS_VENDOR, "Alienware"),
-			DMI_MATCH(DMI_PRODUCT_NAME, "Alienware x17 R2"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "Alienware m17 R5 AMD"),
  		},
-		.driver_data = &quirk_x_series,
+		.driver_data = &x_series_features,
  	},
  	{
-		.callback = dmi_matched,
-		.ident = "Alienware X51 R1",
+		.ident = "Alienware m18 R2",
  		.matches = {
  			DMI_MATCH(DMI_SYS_VENDOR, "Alienware"),
-			DMI_MATCH(DMI_PRODUCT_NAME, "Alienware X51"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "Alienware m18 R2"),
  		},
-		.driver_data = &quirk_x51_r1_r2,
+		.driver_data = &x_series_features,
  	},
  	{
-		.callback = dmi_matched,
-		.ident = "Alienware X51 R2",
+		.ident = "Alienware x15 R1",
  		.matches = {
  			DMI_MATCH(DMI_SYS_VENDOR, "Alienware"),
-			DMI_MATCH(DMI_PRODUCT_NAME, "Alienware X51 R2"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "Alienware x15 R1"),
  		},
-		.driver_data = &quirk_x51_r1_r2,
+		.driver_data = &x_series_features,
  	},
  	{
-		.callback = dmi_matched,
-		.ident = "Alienware X51 R3",
+		.ident = "Alienware x17 R2",
  		.matches = {
  			DMI_MATCH(DMI_SYS_VENDOR, "Alienware"),
-			DMI_MATCH(DMI_PRODUCT_NAME, "Alienware X51 R3"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "Alienware x17 R2"),
  		},
-		.driver_data = &quirk_x51_r3,
+		.driver_data = &x_series_features,
  	},
  	{
-		.callback = dmi_matched,
  		.ident = "Dell Inc. G15 5510",
  		.matches = {
  			DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
  			DMI_MATCH(DMI_PRODUCT_NAME, "Dell G15 5510"),
  		},
-		.driver_data = &quirk_g_series,
+		.driver_data = &g_series_features,
  	},
  	{
-		.callback = dmi_matched,
  		.ident = "Dell Inc. G15 5511",
  		.matches = {
  			DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
  			DMI_MATCH(DMI_PRODUCT_NAME, "Dell G15 5511"),
  		},
-		.driver_data = &quirk_g_series,
+		.driver_data = &g_series_features,
  	},
  	{
-		.callback = dmi_matched,
  		.ident = "Dell Inc. G15 5515",
  		.matches = {
  			DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
  			DMI_MATCH(DMI_PRODUCT_NAME, "Dell G15 5515"),
  		},
-		.driver_data = &quirk_g_series,
+		.driver_data = &g_series_features,
  	},
  	{
-		.callback = dmi_matched,
  		.ident = "Dell Inc. G3 3500",
  		.matches = {
  			DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
  			DMI_MATCH(DMI_PRODUCT_NAME, "G3 3500"),
  		},
-		.driver_data = &quirk_g_series,
+		.driver_data = &g_series_features,
  	},
  	{
-		.callback = dmi_matched,
  		.ident = "Dell Inc. G3 3590",
  		.matches = {
  			DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
  			DMI_MATCH(DMI_PRODUCT_NAME, "G3 3590"),
  		},
-		.driver_data = &quirk_g_series,
+		.driver_data = &g_series_features,
  	},
  	{
-		.callback = dmi_matched,
  		.ident = "Dell Inc. G5 5500",
  		.matches = {
  			DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
  			DMI_MATCH(DMI_PRODUCT_NAME, "G5 5500"),
  		},
-		.driver_data = &quirk_g_series,
-	},
-	{
-		.callback = dmi_matched,
-		.ident = "Dell Inc. Inspiron 5675",
-		.matches = {
-			DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
-			DMI_MATCH(DMI_PRODUCT_NAME, "Inspiron 5675"),
-		},
-		.driver_data = &quirk_inspiron5675,
+		.driver_data = &g_series_features,
  	},
-	{}
  };
 
+struct awcc_features *awcc;
+
  struct color_platform {
  	u8 blue;
  	u8 green;
@@ -1009,7 +982,7 @@ static int thermal_profile_set(struct platform_profile_handler *pprof,
 
  	priv = container_of(pprof, struct awcc_priv, pp_handler);
 
-	if (quirks->gmode) {
+	if (awcc->gmode) {
  		u32 gmode_status;
  		int ret;
 
@@ -1077,7 +1050,7 @@ static int create_thermal_profile(struct wmi_device *wdev)
  	if (bitmap_empty(priv->pp_handler.choices, PLATFORM_PROFILE_LAST))
  		return -ENODEV;
 
-	if (quirks->gmode) {
+	if (awcc->gmode) {
  		priv->supported_thermal_profiles[PLATFORM_PROFILE_PERFORMANCE] =
  			WMAX_THERMAL_MODE_GMODE;
 
@@ -1328,7 +1301,7 @@ static int wmax_wmi_probe(struct wmi_device *wdev, const void *context)
  	};
  	int ret = 0;
 
-	if (quirks->thermal)
+	if (awcc)
  		ret = alienware_awcc_setup(wdev);
  	else
  		ret = alienware_alienfx_setup(&pdata);
@@ -1338,7 +1311,7 @@ static int wmax_wmi_probe(struct wmi_device *wdev, const void *context)
 
  static void wmax_wmi_remove(struct wmi_device *wdev)
  {
-	if (quirks->thermal)
+	if (awcc)
  		alienware_awcc_exit(wdev);
  	else
  		alienware_alienfx_exit(wdev);
@@ -1362,6 +1335,18 @@ static struct wmi_driver alienware_wmax_wmi_driver = {
 
  static int __init alienware_wmax_wmi_init(void)
  {
+	const struct dmi_system_id *id;
+
+	id = dmi_first_match(awcc_dmi_table);
+	if (id)
+		awcc = id->driver_data;
+
+	if (force_platform_profile)
+		awcc = &x_series_features;
+
+	if (force_gmode)
+		awcc = &g_series_features;
+
  	return wmi_driver_register(&alienware_wmax_wmi_driver);
  }
 
@@ -1378,16 +1363,6 @@ static int __init alienware_wmi_init(void)
  	if (quirks == NULL)
  		quirks = &quirk_unknown;
 
-	if (force_platform_profile)
-		quirks->thermal = true;
-
-	if (force_gmode) {
-		if (quirks->thermal)
-			quirks->gmode = true;
-		else
-			pr_warn("force_gmode requires platform profile support\n");
-	}
-
  	if (wmi_has_guid(WMAX_CONTROL_GUID)) {
  		interface = WMAX;
  		ret = alienware_wmax_wmi_init();
#37 lore raw

Re: [PATCH 13/20] alienware-wmi: Split DMI table

Am 27.12.24 um 05:55 schrieb Kurt Borja:

Quoted 10 lines · Armin Wolf
Quoted 5 lines

Am 21.12.24 um 06:59 schrieb Kurt Borja:

Quoted 2 lines

Split thermal features into a new DMI table to support upcoming file split.

Could it be that you also decided to reorder the quirk entries?

No. I'll make this split lower in the file, so it doesn't mess up the diff.

If I did reorder it by accident I will fix it.

OK, having a clear diff would make it easier to verify that no quirk entries have been changed.

Thanks,
Armin Wolf

Quoted 362 lines
Quoted 362 lines

Thanks,
Armin WOlf

Quoted 358 lines
---
   drivers/platform/x86/dell/alienware-wmi.c | 163 +++++++++-------------
   1 file changed, 69 insertions(+), 94 deletions(-)
drivers/platform/x86/dell/alienware-wmi.c +69 -94
index 0a0b72dc61ea..8ea08f5f8810 100644
@@ -118,8 +118,6 @@ struct quirk_entry {
   	u8 hdmi_mux;
   	u8 amplifier;
   	u8 deepslp;
-	bool thermal;
-	bool gmode;
   };
 
   static struct quirk_entry *quirks;
@@ -130,8 +128,6 @@ static struct quirk_entry quirk_inspiron5675 = {
   	.hdmi_mux = 0,
   	.amplifier = 0,
   	.deepslp = 0,
-	.thermal = false,
-	.gmode = false,
   };
 
   static struct quirk_entry quirk_unknown = {
@@ -139,8 +135,6 @@ static struct quirk_entry quirk_unknown = {
   	.hdmi_mux = 0,
   	.amplifier = 0,
   	.deepslp = 0,
-	.thermal = false,
-	.gmode = false,
   };
 
   static struct quirk_entry quirk_x51_r1_r2 = {
@@ -148,8 +142,6 @@ static struct quirk_entry quirk_x51_r1_r2 = {
   	.hdmi_mux = 0,
   	.amplifier = 0,
   	.deepslp = 0,
-	.thermal = false,
-	.gmode = false,
   };
 
   static struct quirk_entry quirk_x51_r3 = {
@@ -157,8 +149,6 @@ static struct quirk_entry quirk_x51_r3 = {
   	.hdmi_mux = 0,
   	.amplifier = 1,
   	.deepslp = 0,
-	.thermal = false,
-	.gmode = false,
   };
 
   static struct quirk_entry quirk_asm100 = {
@@ -166,8 +156,6 @@ static struct quirk_entry quirk_asm100 = {
   	.hdmi_mux = 1,
   	.amplifier = 0,
   	.deepslp = 0,
-	.thermal = false,
-	.gmode = false,
   };
 
   static struct quirk_entry quirk_asm200 = {
@@ -175,8 +163,6 @@ static struct quirk_entry quirk_asm200 = {
   	.hdmi_mux = 1,
   	.amplifier = 0,
   	.deepslp = 1,
-	.thermal = false,
-	.gmode = false,
   };
 
   static struct quirk_entry quirk_asm201 = {
@@ -184,26 +170,6 @@ static struct quirk_entry quirk_asm201 = {
   	.hdmi_mux = 1,
   	.amplifier = 1,
   	.deepslp = 1,
-	.thermal = false,
-	.gmode = false,
-};
-
-static struct quirk_entry quirk_g_series = {
-	.num_zones = 2,
-	.hdmi_mux = 0,
-	.amplifier = 0,
-	.deepslp = 0,
-	.thermal = true,
-	.gmode = true,
-};
-
-static struct quirk_entry quirk_x_series = {
-	.num_zones = 2,
-	.hdmi_mux = 0,
-	.amplifier = 0,
-	.deepslp = 0,
-	.thermal = true,
-	.gmode = false,
   };
 
   static int __init dmi_matched(const struct dmi_system_id *dmi)
@@ -242,133 +208,140 @@ static const struct dmi_system_id alienware_quirks[] __initconst = {
   	},
   	{
   		.callback = dmi_matched,
-		.ident = "Alienware m17 R5",
+		.ident = "Alienware X51 R1",
   		.matches = {
   			DMI_MATCH(DMI_SYS_VENDOR, "Alienware"),
-			DMI_MATCH(DMI_PRODUCT_NAME, "Alienware m17 R5 AMD"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "Alienware X51"),
   		},
-		.driver_data = &quirk_x_series,
+		.driver_data = &quirk_x51_r1_r2,
   	},
   	{
   		.callback = dmi_matched,
-		.ident = "Alienware m18 R2",
+		.ident = "Alienware X51 R2",
   		.matches = {
   			DMI_MATCH(DMI_SYS_VENDOR, "Alienware"),
-			DMI_MATCH(DMI_PRODUCT_NAME, "Alienware m18 R2"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "Alienware X51 R2"),
   		},
-		.driver_data = &quirk_x_series,
+		.driver_data = &quirk_x51_r1_r2,
   	},
   	{
   		.callback = dmi_matched,
-		.ident = "Alienware x15 R1",
+		.ident = "Alienware X51 R3",
   		.matches = {
   			DMI_MATCH(DMI_SYS_VENDOR, "Alienware"),
-			DMI_MATCH(DMI_PRODUCT_NAME, "Alienware x15 R1"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "Alienware X51 R3"),
   		},
-		.driver_data = &quirk_x_series,
+		.driver_data = &quirk_x51_r3,
   	},
   	{
   		.callback = dmi_matched,
-		.ident = "Alienware x17 R2",
+		.ident = "Dell Inc. Inspiron 5675",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
+			DMI_MATCH(DMI_PRODUCT_NAME, "Inspiron 5675"),
+		},
+		.driver_data = &quirk_inspiron5675,
+	},
+	{}
+};
+
+struct awcc_features {
+	bool gmode;
+};
+
+static struct awcc_features g_series_features = {
+	.gmode = true,
+};
+
+static struct awcc_features x_series_features = {
+	.gmode = false,
+};
+
+static const struct dmi_system_id awcc_dmi_table[] __initconst = {
+	{
+		.ident = "Alienware m17 R5",
   		.matches = {
   			DMI_MATCH(DMI_SYS_VENDOR, "Alienware"),
-			DMI_MATCH(DMI_PRODUCT_NAME, "Alienware x17 R2"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "Alienware m17 R5 AMD"),
   		},
-		.driver_data = &quirk_x_series,
+		.driver_data = &x_series_features,
   	},
   	{
-		.callback = dmi_matched,
-		.ident = "Alienware X51 R1",
+		.ident = "Alienware m18 R2",
   		.matches = {
   			DMI_MATCH(DMI_SYS_VENDOR, "Alienware"),
-			DMI_MATCH(DMI_PRODUCT_NAME, "Alienware X51"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "Alienware m18 R2"),
   		},
-		.driver_data = &quirk_x51_r1_r2,
+		.driver_data = &x_series_features,
   	},
   	{
-		.callback = dmi_matched,
-		.ident = "Alienware X51 R2",
+		.ident = "Alienware x15 R1",
   		.matches = {
   			DMI_MATCH(DMI_SYS_VENDOR, "Alienware"),
-			DMI_MATCH(DMI_PRODUCT_NAME, "Alienware X51 R2"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "Alienware x15 R1"),
   		},
-		.driver_data = &quirk_x51_r1_r2,
+		.driver_data = &x_series_features,
   	},
   	{
-		.callback = dmi_matched,
-		.ident = "Alienware X51 R3",
+		.ident = "Alienware x17 R2",
   		.matches = {
   			DMI_MATCH(DMI_SYS_VENDOR, "Alienware"),
-			DMI_MATCH(DMI_PRODUCT_NAME, "Alienware X51 R3"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "Alienware x17 R2"),
   		},
-		.driver_data = &quirk_x51_r3,
+		.driver_data = &x_series_features,
   	},
   	{
-		.callback = dmi_matched,
   		.ident = "Dell Inc. G15 5510",
   		.matches = {
   			DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
   			DMI_MATCH(DMI_PRODUCT_NAME, "Dell G15 5510"),
   		},
-		.driver_data = &quirk_g_series,
+		.driver_data = &g_series_features,
   	},
   	{
-		.callback = dmi_matched,
   		.ident = "Dell Inc. G15 5511",
   		.matches = {
   			DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
   			DMI_MATCH(DMI_PRODUCT_NAME, "Dell G15 5511"),
   		},
-		.driver_data = &quirk_g_series,
+		.driver_data = &g_series_features,
   	},
   	{
-		.callback = dmi_matched,
   		.ident = "Dell Inc. G15 5515",
   		.matches = {
   			DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
   			DMI_MATCH(DMI_PRODUCT_NAME, "Dell G15 5515"),
   		},
-		.driver_data = &quirk_g_series,
+		.driver_data = &g_series_features,
   	},
   	{
-		.callback = dmi_matched,
   		.ident = "Dell Inc. G3 3500",
   		.matches = {
   			DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
   			DMI_MATCH(DMI_PRODUCT_NAME, "G3 3500"),
   		},
-		.driver_data = &quirk_g_series,
+		.driver_data = &g_series_features,
   	},
   	{
-		.callback = dmi_matched,
   		.ident = "Dell Inc. G3 3590",
   		.matches = {
   			DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
   			DMI_MATCH(DMI_PRODUCT_NAME, "G3 3590"),
   		},
-		.driver_data = &quirk_g_series,
+		.driver_data = &g_series_features,
   	},
   	{
-		.callback = dmi_matched,
   		.ident = "Dell Inc. G5 5500",
   		.matches = {
   			DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
   			DMI_MATCH(DMI_PRODUCT_NAME, "G5 5500"),
   		},
-		.driver_data = &quirk_g_series,
-	},
-	{
-		.callback = dmi_matched,
-		.ident = "Dell Inc. Inspiron 5675",
-		.matches = {
-			DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
-			DMI_MATCH(DMI_PRODUCT_NAME, "Inspiron 5675"),
-		},
-		.driver_data = &quirk_inspiron5675,
+		.driver_data = &g_series_features,
   	},
-	{}
   };
 
+struct awcc_features *awcc;
+
   struct color_platform {
   	u8 blue;
   	u8 green;
@@ -1009,7 +982,7 @@ static int thermal_profile_set(struct platform_profile_handler *pprof,
 
   	priv = container_of(pprof, struct awcc_priv, pp_handler);
 
-	if (quirks->gmode) {
+	if (awcc->gmode) {
   		u32 gmode_status;
   		int ret;
 
@@ -1077,7 +1050,7 @@ static int create_thermal_profile(struct wmi_device *wdev)
   	if (bitmap_empty(priv->pp_handler.choices, PLATFORM_PROFILE_LAST))
   		return -ENODEV;
 
-	if (quirks->gmode) {
+	if (awcc->gmode) {
   		priv->supported_thermal_profiles[PLATFORM_PROFILE_PERFORMANCE] =
   			WMAX_THERMAL_MODE_GMODE;
 
@@ -1328,7 +1301,7 @@ static int wmax_wmi_probe(struct wmi_device *wdev, const void *context)
   	};
   	int ret = 0;
 
-	if (quirks->thermal)
+	if (awcc)
   		ret = alienware_awcc_setup(wdev);
   	else
   		ret = alienware_alienfx_setup(&pdata);
@@ -1338,7 +1311,7 @@ static int wmax_wmi_probe(struct wmi_device *wdev, const void *context)
 
   static void wmax_wmi_remove(struct wmi_device *wdev)
   {
-	if (quirks->thermal)
+	if (awcc)
   		alienware_awcc_exit(wdev);
   	else
   		alienware_alienfx_exit(wdev);
@@ -1362,6 +1335,18 @@ static struct wmi_driver alienware_wmax_wmi_driver = {
 
   static int __init alienware_wmax_wmi_init(void)
   {
+	const struct dmi_system_id *id;
+
+	id = dmi_first_match(awcc_dmi_table);
+	if (id)
+		awcc = id->driver_data;
+
+	if (force_platform_profile)
+		awcc = &x_series_features;
+
+	if (force_gmode)
+		awcc = &g_series_features;
+
   	return wmi_driver_register(&alienware_wmax_wmi_driver);
   }
 
@@ -1378,16 +1363,6 @@ static int __init alienware_wmi_init(void)
   	if (quirks == NULL)
   		quirks = &quirk_unknown;
 
-	if (force_platform_profile)
-		quirks->thermal = true;
-
-	if (force_gmode) {
-		if (quirks->thermal)
-			quirks->gmode = true;
-		else
-			pr_warn("force_gmode requires platform profile support\n");
-	}
-
   	if (wmi_has_guid(WMAX_CONTROL_GUID)) {
   		interface = WMAX;
   		ret = alienware_wmax_wmi_init();
author maintainer
#38 lore raw

PATCH 14/20 MAINTAINERS: Update ALIENWARE WMI DRIVER entry

In reply to Kurt Borja

Dell has been inactive in its maintainership role of this driver since around 2021. Due to this, add myself as a maintainer.

---
 MAINTAINERS | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)
MAINTAINERS +3 -1
index 3809931b9240..596c6a46478c 100644
@@ -784,10 +784,12 @@ F:	Documentation/admin-guide/perf/alibaba_pmu.rst
 F:	drivers/perf/alibaba_uncore_drw_pmu.c
 
 ALIENWARE WMI DRIVER
+M:	Kurt Borja <[email protected]>
+L:	[email protected]
 L:	[email protected]
 S:	Maintained
 F:	Documentation/wmi/devices/alienware-wmi.rst
-F:	drivers/platform/x86/dell/alienware-wmi.c
+F:	drivers/platform/x86/dell/alienware-wmi*
 
 ALLEGRO DVT VIDEO IP CORE DRIVER
 M:	Michael Tretter <[email protected]>
Signature · 1 line
2.47.1
Reviewed-by on v1 14/20
#39 lore raw

Re: [PATCH 14/20] MAINTAINERS: Update ALIENWARE WMI DRIVER entry

Am 21.12.24 um 06:59 schrieb Kurt Borja:

Quoted 2 lines

Dell has been inactive in its maintainership role of this driver since around 2021. Due to this, add myself as a maintainer.

Quoted 24 lines
---
  MAINTAINERS | 4 +++-
  1 file changed, 3 insertions(+), 1 deletion(-)
MAINTAINERS +3 -1
index 3809931b9240..596c6a46478c 100644
@@ -784,10 +784,12 @@ F:	Documentation/admin-guide/perf/alibaba_pmu.rst
  F:	drivers/perf/alibaba_uncore_drw_pmu.c
 
  ALIENWARE WMI DRIVER
+M:	Kurt Borja <[email protected]>
+L:	[email protected]
  L:	[email protected]
  S:	Maintained
  F:	Documentation/wmi/devices/alienware-wmi.rst
-F:	drivers/platform/x86/dell/alienware-wmi.c
+F:	drivers/platform/x86/dell/alienware-wmi*
 
  ALLEGRO DVT VIDEO IP CORE DRIVER
  M:	Michael Tretter <[email protected]>
author maintainer
#40 lore raw

PATCH 15/20 platform/x86: Rename alienware-wmi.c

In reply to Kurt Borja

Rename alienware-wmi to support upcoming split.

---
 drivers/platform/x86/dell/Makefile                               | 1 +
 .../platform/x86/dell/{alienware-wmi.c => alienware-wmi-base.c}  | 0
 2 files changed, 1 insertion(+)
 rename drivers/platform/x86/dell/{alienware-wmi.c => alienware-wmi-base.c} (100%)
drivers/platform/x86/dell/Makefile +1 -0
index bb3cbd470a46..f8aec8502c2f 100644
@@ -5,6 +5,7 @@
 #
 
 obj-$(CONFIG_ALIENWARE_WMI)		+= alienware-wmi.o
+alienware-wmi-objs			:= alienware-wmi-base.o
 obj-$(CONFIG_DCDBAS)			+= dcdbas.o
 obj-$(CONFIG_DELL_LAPTOP)		+= dell-laptop.o
 obj-$(CONFIG_DELL_RBTN)			+= dell-rbtn.o
drivers/platform/x86/dell/alienware-wmi-base.c renamed from drivers/platform/x86/dell/alienware-wmi.c +0 -0
similarity index 100%
rename from drivers/platform/x86/dell/alienware-wmi.c
rename to drivers/platform/x86/dell/alienware-wmi-base.c
Signature · 1 line
2.47.1
Reviewed-by on v1 15/20
#41 lore raw

Re: [PATCH 15/20] platform/x86: Rename alienware-wmi.c

Am 21.12.24 um 06:59 schrieb Kurt Borja:

Quoted 1 line

Rename alienware-wmi to support upcoming split.

Quoted 24 lines
---
  drivers/platform/x86/dell/Makefile                               | 1 +
  .../platform/x86/dell/{alienware-wmi.c => alienware-wmi-base.c}  | 0
  2 files changed, 1 insertion(+)

rename drivers/platform/x86/dell/{alienware-wmi.c => alienware-wmi-base.c} (100%)

drivers/platform/x86/dell/Makefile +1 -0
index bb3cbd470a46..f8aec8502c2f 100644
@@ -5,6 +5,7 @@
  #
 
  obj-$(CONFIG_ALIENWARE_WMI)		+= alienware-wmi.o
+alienware-wmi-objs			:= alienware-wmi-base.o
  obj-$(CONFIG_DCDBAS)			+= dcdbas.o
  obj-$(CONFIG_DELL_LAPTOP)		+= dell-laptop.o
  obj-$(CONFIG_DELL_RBTN)			+= dell-rbtn.o
drivers/platform/x86/dell/alienware-wmi-base.c renamed from drivers/platform/x86/dell/alienware-wmi.c +0 -0
similarity index 100%
rename from drivers/platform/x86/dell/alienware-wmi.c
rename to drivers/platform/x86/dell/alienware-wmi-base.c
author maintainer
#42 lore raw

PATCH 16/20 platform/x86: Add alienware-wmi.h

In reply to Kurt Borja

Add a header file for alienware-wmi with shared resources to support the upcoming file split.

---
 .../platform/x86/dell/alienware-wmi-base.c    |  93 ++--------------
 drivers/platform/x86/dell/alienware-wmi.h     | 103 ++++++++++++++++++
 2 files changed, 112 insertions(+), 84 deletions(-)
 create mode 100644 drivers/platform/x86/dell/alienware-wmi.h
drivers/platform/x86/dell/alienware-wmi-base.c +9 -84
index 8ea08f5f8810..e8d470bbb608 100644
@@ -16,26 +16,7 @@
 #include <linux/dmi.h>
 #include <linux/leds.h>
 #include <linux/wmi.h>
-
-#define LEGACY_CONTROL_GUID		"A90597CE-A997-11DA-B012-B622A1EF5492"
-#define LEGACY_POWER_CONTROL_GUID	"A80593CE-A997-11DA-B012-B622A1EF5492"
-#define WMAX_CONTROL_GUID		"A70591CE-A997-11DA-B012-B622A1EF5492"
-
-#define WMAX_METHOD_HDMI_SOURCE		0x1
-#define WMAX_METHOD_HDMI_STATUS		0x2
-#define WMAX_METHOD_BRIGHTNESS		0x3
-#define WMAX_METHOD_ZONE_CONTROL	0x4
-#define WMAX_METHOD_HDMI_CABLE		0x5
-#define WMAX_METHOD_AMPLIFIER_CABLE	0x6
-#define WMAX_METHOD_DEEP_SLEEP_CONTROL	0x0B
-#define WMAX_METHOD_DEEP_SLEEP_STATUS	0x0C
-#define WMAX_METHOD_THERMAL_INFORMATION	0x14
-#define WMAX_METHOD_THERMAL_CONTROL	0x15
-#define WMAX_METHOD_GAME_SHIFT_STATUS	0x25
-
-#define WMAX_THERMAL_MODE_GMODE		0xAB
-
-#define WMAX_FAILURE_CODE		0xFFFFFFFF
+#include "alienware-wmi.h"
 
 MODULE_AUTHOR("Mario Limonciello <[email protected]>");
 MODULE_DESCRIPTION("Alienware special feature control");
@@ -54,18 +35,6 @@ enum INTERFACE_FLAGS {
 	WMAX,
 };
 
-enum LEGACY_CONTROL_STATES {
-	LEGACY_RUNNING = 1,
-	LEGACY_BOOTING = 0,
-	LEGACY_SUSPEND = 3,
-};
-
-enum WMAX_CONTROL_STATES {
-	WMAX_RUNNING = 0xFF,
-	WMAX_BOOTING = 0,
-	WMAX_SUSPEND = 3,
-};
-
 enum WMAX_THERMAL_INFORMATION_OPERATIONS {
 	WMAX_OPERATION_SYS_DESCRIPTION		= 0x02,
 	WMAX_OPERATION_LIST_IDS			= 0x03,
@@ -122,7 +91,6 @@ struct quirk_entry {
 
 static struct quirk_entry *quirks;
 
-
 static struct quirk_entry quirk_inspiron5675 = {
 	.num_zones = 2,
 	.hdmi_mux = 0,
@@ -342,33 +310,10 @@ static const struct dmi_system_id awcc_dmi_table[] __initconst = {
 
 struct awcc_features *awcc;
 
-struct color_platform {
-	u8 blue;
-	u8 green;
-	u8 red;
-} __packed;
-
-struct wmax_brightness_args {
-	u32 led_mask;
-	u32 percentage;
-};
-
 struct wmax_basic_args {
 	u8 arg;
 };
 
-struct legacy_led_args {
-	struct color_platform colors;
-	u8 brightness;
-	u8 state;
-} __packed;
-
-struct wmax_led_args {
-	u32 led_mask;
-	struct color_platform colors;
-	u8 state;
-} __packed;
-
 struct wmax_u32_args {
 	u8 operation;
 	u8 arg1;
@@ -382,30 +327,10 @@ struct awcc_priv {
 	enum wmax_thermal_mode supported_thermal_profiles[PLATFORM_PROFILE_LAST];
 };
 
-struct alienfx_priv {
-	struct platform_device *pdev;
-	struct led_classdev global_led;
-	struct color_platform colors[4];
-	u8 global_brightness;
-	u8 lighting_control_state;
-};
-
-struct alienfx_ops {
-	int (*upd_led)(struct alienfx_priv *priv, struct wmi_device *wdev,
-		       u8 location);
-	int (*upd_brightness)(struct alienfx_priv *priv, struct wmi_device *wdev,
-			      u8 brightness);
-};
-
-struct alienfx_platdata {
-	struct wmi_device *wdev;
-	struct alienfx_ops ops;
-};
-
 static u8 interface;
 
-static acpi_status alienware_wmi_command(struct wmi_device *wdev, u32 method_id,
-					 void *in_args, size_t in_size, u32 *out_data)
+acpi_status alienware_wmi_command(struct wmi_device *wdev, u32 method_id,
+				  void *in_args, size_t in_size, u32 *out_data)
 {
 	struct acpi_buffer out = {ACPI_ALLOCATE_BUFFER, NULL};
 	struct acpi_buffer in = {in_size, in_args};
@@ -1139,7 +1064,7 @@ static struct platform_driver platform_driver = {
 	.probe = alienfx_probe,
 };
 
-static int alienware_alienfx_setup(struct alienfx_platdata *pdata)
+int alienware_alienfx_setup(struct alienfx_platdata *pdata)
 {
 	struct platform_device *pdev;
 	int ret;
@@ -1162,7 +1087,7 @@ static int alienware_alienfx_setup(struct alienfx_platdata *pdata)
 	return 0;
 }
 
-static void alienware_alienfx_exit(struct wmi_device *wdev)
+void alienware_alienfx_exit(struct wmi_device *wdev)
 {
 	struct platform_device *pdev;
 
@@ -1242,12 +1167,12 @@ static struct wmi_driver alienware_legacy_wmi_driver = {
 	.remove = legacy_wmi_remove,
 };
 
-static int __init alienware_legacy_wmi_init(void)
+int __init alienware_legacy_wmi_init(void)
 {
 	return wmi_driver_register(&alienware_legacy_wmi_driver);
 }
 
-static void __exit alienware_legacy_wmi_exit(void)
+void __exit alienware_legacy_wmi_exit(void)
 {
 	wmi_driver_unregister(&alienware_legacy_wmi_driver);
 }
@@ -1333,7 +1258,7 @@ static struct wmi_driver alienware_wmax_wmi_driver = {
 	.remove = wmax_wmi_remove,
 };
 
-static int __init alienware_wmax_wmi_init(void)
+int __init alienware_wmax_wmi_init(void)
 {
 	const struct dmi_system_id *id;
 
@@ -1350,7 +1275,7 @@ static int __init alienware_wmax_wmi_init(void)
 	return wmi_driver_register(&alienware_wmax_wmi_driver);
 }
 
-static void __exit alienware_wmax_wmi_exit(void)
+void __exit alienware_wmax_wmi_exit(void)
 {
 	wmi_driver_unregister(&alienware_wmax_wmi_driver);
 }
drivers/platform/x86/dell/alienware-wmi.h new file +103 -0

103 lines not on this page · raw message

Signature · 1 line
2.47.1
#43 lore raw

Re: [PATCH 16/20] platform/x86: Add alienware-wmi.h

Am 21.12.24 um 06:59 schrieb Kurt Borja:

Quoted 2 lines

Add a header file for alienware-wmi with shared resources to support the upcoming file split.

I am OK with this, but only common definitions should be moved inside this header file. Definitions only used by a single driver should remain inside the driver file.

Thanks,
Armin Wolf

Quoted 293 lines
---
  .../platform/x86/dell/alienware-wmi-base.c    |  93 ++--------------
  drivers/platform/x86/dell/alienware-wmi.h     | 103 ++++++++++++++++++
  2 files changed, 112 insertions(+), 84 deletions(-)

create mode 100644 drivers/platform/x86/dell/alienware-wmi.h

drivers/platform/x86/dell/alienware-wmi-base.c +9 -84
index 8ea08f5f8810..e8d470bbb608 100644
@@ -16,26 +16,7 @@
  #include <linux/dmi.h>
  #include <linux/leds.h>
  #include <linux/wmi.h>
-
-#define LEGACY_CONTROL_GUID		"A90597CE-A997-11DA-B012-B622A1EF5492"
-#define LEGACY_POWER_CONTROL_GUID	"A80593CE-A997-11DA-B012-B622A1EF5492"
-#define WMAX_CONTROL_GUID		"A70591CE-A997-11DA-B012-B622A1EF5492"
-
-#define WMAX_METHOD_HDMI_SOURCE		0x1
-#define WMAX_METHOD_HDMI_STATUS		0x2
-#define WMAX_METHOD_BRIGHTNESS		0x3
-#define WMAX_METHOD_ZONE_CONTROL	0x4
-#define WMAX_METHOD_HDMI_CABLE		0x5
-#define WMAX_METHOD_AMPLIFIER_CABLE	0x6
-#define WMAX_METHOD_DEEP_SLEEP_CONTROL	0x0B
-#define WMAX_METHOD_DEEP_SLEEP_STATUS	0x0C
-#define WMAX_METHOD_THERMAL_INFORMATION	0x14
-#define WMAX_METHOD_THERMAL_CONTROL	0x15
-#define WMAX_METHOD_GAME_SHIFT_STATUS	0x25
-
-#define WMAX_THERMAL_MODE_GMODE		0xAB
-
-#define WMAX_FAILURE_CODE		0xFFFFFFFF
+#include "alienware-wmi.h"
 
  MODULE_AUTHOR("Mario Limonciello <[email protected]>");
  MODULE_DESCRIPTION("Alienware special feature control");
@@ -54,18 +35,6 @@ enum INTERFACE_FLAGS {
  	WMAX,
  };
 
-enum LEGACY_CONTROL_STATES {
-	LEGACY_RUNNING = 1,
-	LEGACY_BOOTING = 0,
-	LEGACY_SUSPEND = 3,
-};
-
-enum WMAX_CONTROL_STATES {
-	WMAX_RUNNING = 0xFF,
-	WMAX_BOOTING = 0,
-	WMAX_SUSPEND = 3,
-};
-
  enum WMAX_THERMAL_INFORMATION_OPERATIONS {
  	WMAX_OPERATION_SYS_DESCRIPTION		= 0x02,
  	WMAX_OPERATION_LIST_IDS			= 0x03,
@@ -122,7 +91,6 @@ struct quirk_entry {
 
  static struct quirk_entry *quirks;
 
-
  static struct quirk_entry quirk_inspiron5675 = {
  	.num_zones = 2,
  	.hdmi_mux = 0,
@@ -342,33 +310,10 @@ static const struct dmi_system_id awcc_dmi_table[] __initconst = {
 
  struct awcc_features *awcc;
 
-struct color_platform {
-	u8 blue;
-	u8 green;
-	u8 red;
-} __packed;
-
-struct wmax_brightness_args {
-	u32 led_mask;
-	u32 percentage;
-};
-
  struct wmax_basic_args {
  	u8 arg;
  };
 
-struct legacy_led_args {
-	struct color_platform colors;
-	u8 brightness;
-	u8 state;
-} __packed;
-
-struct wmax_led_args {
-	u32 led_mask;
-	struct color_platform colors;
-	u8 state;
-} __packed;
-
  struct wmax_u32_args {
  	u8 operation;
  	u8 arg1;
@@ -382,30 +327,10 @@ struct awcc_priv {
  	enum wmax_thermal_mode supported_thermal_profiles[PLATFORM_PROFILE_LAST];
  };
 
-struct alienfx_priv {
-	struct platform_device *pdev;
-	struct led_classdev global_led;
-	struct color_platform colors[4];
-	u8 global_brightness;
-	u8 lighting_control_state;
-};
-
-struct alienfx_ops {
-	int (*upd_led)(struct alienfx_priv *priv, struct wmi_device *wdev,
-		       u8 location);
-	int (*upd_brightness)(struct alienfx_priv *priv, struct wmi_device *wdev,
-			      u8 brightness);
-};
-
-struct alienfx_platdata {
-	struct wmi_device *wdev;
-	struct alienfx_ops ops;
-};
-
  static u8 interface;
 
-static acpi_status alienware_wmi_command(struct wmi_device *wdev, u32 method_id,
-					 void *in_args, size_t in_size, u32 *out_data)
+acpi_status alienware_wmi_command(struct wmi_device *wdev, u32 method_id,
+				  void *in_args, size_t in_size, u32 *out_data)
  {
  	struct acpi_buffer out = {ACPI_ALLOCATE_BUFFER, NULL};
  	struct acpi_buffer in = {in_size, in_args};
@@ -1139,7 +1064,7 @@ static struct platform_driver platform_driver = {
  	.probe = alienfx_probe,
  };
 
-static int alienware_alienfx_setup(struct alienfx_platdata *pdata)
+int alienware_alienfx_setup(struct alienfx_platdata *pdata)
  {
  	struct platform_device *pdev;
  	int ret;
@@ -1162,7 +1087,7 @@ static int alienware_alienfx_setup(struct alienfx_platdata *pdata)
  	return 0;
  }
 
-static void alienware_alienfx_exit(struct wmi_device *wdev)
+void alienware_alienfx_exit(struct wmi_device *wdev)
  {
  	struct platform_device *pdev;
 
@@ -1242,12 +1167,12 @@ static struct wmi_driver alienware_legacy_wmi_driver = {
  	.remove = legacy_wmi_remove,
  };
 
-static int __init alienware_legacy_wmi_init(void)
+int __init alienware_legacy_wmi_init(void)
  {
  	return wmi_driver_register(&alienware_legacy_wmi_driver);
  }
 
-static void __exit alienware_legacy_wmi_exit(void)
+void __exit alienware_legacy_wmi_exit(void)
  {
  	wmi_driver_unregister(&alienware_legacy_wmi_driver);
  }
@@ -1333,7 +1258,7 @@ static struct wmi_driver alienware_wmax_wmi_driver = {
  	.remove = wmax_wmi_remove,
  };
 
-static int __init alienware_wmax_wmi_init(void)
+int __init alienware_wmax_wmi_init(void)
  {
  	const struct dmi_system_id *id;
 
@@ -1350,7 +1275,7 @@ static int __init alienware_wmax_wmi_init(void)
  	return wmi_driver_register(&alienware_wmax_wmi_driver);
  }
 
-static void __exit alienware_wmax_wmi_exit(void)
+void __exit alienware_wmax_wmi_exit(void)
  {
  	wmi_driver_unregister(&alienware_wmax_wmi_driver);
  }
drivers/platform/x86/dell/alienware-wmi.h new file +103 -0
new file mode 100644
index 000000000000..78ac10122155
@@ -0,0 +1,103 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/*
+ * Alienware WMI special features driver
+ *
+ * Copyright (C) 2014 Dell Inc <[email protected]>
+ * Copyright (C) 2024 Kurt Borja <[email protected]>
+ */
+
+#ifndef _ALIENWARE_WMI_H_
+#define _ALIENWARE_WMI_H_
+
+#include <linux/leds.h>
+#include <linux/platform_device.h>
+#include <linux/wmi.h>
+
+#define LEGACY_CONTROL_GUID		"A90597CE-A997-11DA-B012-B622A1EF5492"
+#define LEGACY_POWER_CONTROL_GUID	"A80593CE-A997-11DA-B012-B622A1EF5492"
+#define WMAX_CONTROL_GUID		"A70591CE-A997-11DA-B012-B622A1EF5492"
+
+#define WMAX_METHOD_HDMI_SOURCE			0x1
+#define WMAX_METHOD_HDMI_STATUS			0x2
+#define WMAX_METHOD_BRIGHTNESS			0x3
+#define WMAX_METHOD_ZONE_CONTROL		0x4
+#define WMAX_METHOD_HDMI_CABLE			0x5
+#define WMAX_METHOD_AMPLIFIER_CABLE		0x6
+#define WMAX_METHOD_DEEP_SLEEP_CONTROL		0x0B
+#define WMAX_METHOD_DEEP_SLEEP_STATUS		0x0C
+#define WMAX_METHOD_THERMAL_INFORMATION		0x14
+#define WMAX_METHOD_THERMAL_CONTROL		0x15
+#define WMAX_METHOD_GAME_SHIFT_STATUS		0x25
+
+#define WMAX_THERMAL_MODE_GMODE			0xAB
+
+#define WMAX_FAILURE_CODE			0xFFFFFFFF
+
+enum LEGACY_CONTROL_STATES {
+	LEGACY_RUNNING = 1,
+	LEGACY_BOOTING = 0,
+	LEGACY_SUSPEND = 3,
+};
+
+enum WMAX_CONTROL_STATES {
+	WMAX_RUNNING = 0xFF,
+	WMAX_BOOTING = 0,
+	WMAX_SUSPEND = 3,
+};
+
+struct color_platform {
+	u8 blue;
+	u8 green;
+	u8 red;
+} __packed;
+
+struct wmax_brightness_args {
+	u32 led_mask;
+	u32 percentage;
+};
+
+struct legacy_led_args {
+	struct color_platform colors;
+	u8 brightness;
+	u8 state;
+} __packed;
+
+struct wmax_led_args {
+	u32 led_mask;
+	struct color_platform colors;
+	u8 state;
+} __packed;
+
+struct alienfx_priv {
+	struct platform_device *pdev;
+	struct led_classdev global_led;
+	struct color_platform colors[4];
+	u8 global_brightness;
+	u8 lighting_control_state;
+};
+
+struct alienfx_ops {
+	int (*upd_led)(struct alienfx_priv *priv, struct wmi_device *wdev,
+		       u8 location);
+	int (*upd_brightness)(struct alienfx_priv *priv, struct wmi_device *wdev,
+			      u8 brightness);
+};
+
+struct alienfx_platdata {
+	struct wmi_device *wdev;
+	struct alienfx_ops ops;
+};
+
+acpi_status alienware_wmi_command(struct wmi_device *wdev, u32 method_id,
+				  void *in_args, size_t in_size, u32 *out_data);
+
+int alienware_alienfx_setup(struct alienfx_platdata *pdata);
+void alienware_alienfx_exit(struct wmi_device *wdev);
+
+int __init alienware_legacy_wmi_init(void);
+void __exit alienware_legacy_wmi_exit(void);
+
+int __init alienware_wmax_wmi_init(void);
+void __exit alienware_wmax_wmi_exit(void);
+
+#endif
author maintainer
#44 lore raw

Re: [PATCH 16/20] platform/x86: Add alienware-wmi.h

Quoted 7 lines · Armin Wolf

Am 21.12.24 um 06:59 schrieb Kurt Borja:

Quoted 2 lines

Add a header file for alienware-wmi with shared resources to support the upcoming file split.

I am OK with this, but only common definitions should be moved inside this header file. Definitions only used by a single driver should remain inside the driver file.

Ack.

Quoted 297 lines

Thanks,
Armin Wolf

Quoted 293 lines
---
  .../platform/x86/dell/alienware-wmi-base.c    |  93 ++--------------
  drivers/platform/x86/dell/alienware-wmi.h     | 103 ++++++++++++++++++
  2 files changed, 112 insertions(+), 84 deletions(-)

create mode 100644 drivers/platform/x86/dell/alienware-wmi.h

drivers/platform/x86/dell/alienware-wmi-base.c +9 -84
index 8ea08f5f8810..e8d470bbb608 100644
@@ -16,26 +16,7 @@
  #include <linux/dmi.h>
  #include <linux/leds.h>
  #include <linux/wmi.h>
-
-#define LEGACY_CONTROL_GUID		"A90597CE-A997-11DA-B012-B622A1EF5492"
-#define LEGACY_POWER_CONTROL_GUID	"A80593CE-A997-11DA-B012-B622A1EF5492"
-#define WMAX_CONTROL_GUID		"A70591CE-A997-11DA-B012-B622A1EF5492"
-
-#define WMAX_METHOD_HDMI_SOURCE		0x1
-#define WMAX_METHOD_HDMI_STATUS		0x2
-#define WMAX_METHOD_BRIGHTNESS		0x3
-#define WMAX_METHOD_ZONE_CONTROL	0x4
-#define WMAX_METHOD_HDMI_CABLE		0x5
-#define WMAX_METHOD_AMPLIFIER_CABLE	0x6
-#define WMAX_METHOD_DEEP_SLEEP_CONTROL	0x0B
-#define WMAX_METHOD_DEEP_SLEEP_STATUS	0x0C
-#define WMAX_METHOD_THERMAL_INFORMATION	0x14
-#define WMAX_METHOD_THERMAL_CONTROL	0x15
-#define WMAX_METHOD_GAME_SHIFT_STATUS	0x25
-
-#define WMAX_THERMAL_MODE_GMODE		0xAB
-
-#define WMAX_FAILURE_CODE		0xFFFFFFFF
+#include "alienware-wmi.h"
 
  MODULE_AUTHOR("Mario Limonciello <[email protected]>");
  MODULE_DESCRIPTION("Alienware special feature control");
@@ -54,18 +35,6 @@ enum INTERFACE_FLAGS {
  	WMAX,
  };
 
-enum LEGACY_CONTROL_STATES {
-	LEGACY_RUNNING = 1,
-	LEGACY_BOOTING = 0,
-	LEGACY_SUSPEND = 3,
-};
-
-enum WMAX_CONTROL_STATES {
-	WMAX_RUNNING = 0xFF,
-	WMAX_BOOTING = 0,
-	WMAX_SUSPEND = 3,
-};
-
  enum WMAX_THERMAL_INFORMATION_OPERATIONS {
  	WMAX_OPERATION_SYS_DESCRIPTION		= 0x02,
  	WMAX_OPERATION_LIST_IDS			= 0x03,
@@ -122,7 +91,6 @@ struct quirk_entry {
 
  static struct quirk_entry *quirks;
 
-
  static struct quirk_entry quirk_inspiron5675 = {
  	.num_zones = 2,
  	.hdmi_mux = 0,
@@ -342,33 +310,10 @@ static const struct dmi_system_id awcc_dmi_table[] __initconst = {
 
  struct awcc_features *awcc;
 
-struct color_platform {
-	u8 blue;
-	u8 green;
-	u8 red;
-} __packed;
-
-struct wmax_brightness_args {
-	u32 led_mask;
-	u32 percentage;
-};
-
  struct wmax_basic_args {
  	u8 arg;
  };
 
-struct legacy_led_args {
-	struct color_platform colors;
-	u8 brightness;
-	u8 state;
-} __packed;
-
-struct wmax_led_args {
-	u32 led_mask;
-	struct color_platform colors;
-	u8 state;
-} __packed;
-
  struct wmax_u32_args {
  	u8 operation;
  	u8 arg1;
@@ -382,30 +327,10 @@ struct awcc_priv {
  	enum wmax_thermal_mode supported_thermal_profiles[PLATFORM_PROFILE_LAST];
  };
 
-struct alienfx_priv {
-	struct platform_device *pdev;
-	struct led_classdev global_led;
-	struct color_platform colors[4];
-	u8 global_brightness;
-	u8 lighting_control_state;
-};
-
-struct alienfx_ops {
-	int (*upd_led)(struct alienfx_priv *priv, struct wmi_device *wdev,
-		       u8 location);
-	int (*upd_brightness)(struct alienfx_priv *priv, struct wmi_device *wdev,
-			      u8 brightness);
-};
-
-struct alienfx_platdata {
-	struct wmi_device *wdev;
-	struct alienfx_ops ops;
-};
-
  static u8 interface;
 
-static acpi_status alienware_wmi_command(struct wmi_device *wdev, u32 method_id,
-					 void *in_args, size_t in_size, u32 *out_data)
+acpi_status alienware_wmi_command(struct wmi_device *wdev, u32 method_id,
+				  void *in_args, size_t in_size, u32 *out_data)
  {
  	struct acpi_buffer out = {ACPI_ALLOCATE_BUFFER, NULL};
  	struct acpi_buffer in = {in_size, in_args};
@@ -1139,7 +1064,7 @@ static struct platform_driver platform_driver = {
  	.probe = alienfx_probe,
  };
 
-static int alienware_alienfx_setup(struct alienfx_platdata *pdata)
+int alienware_alienfx_setup(struct alienfx_platdata *pdata)
  {
  	struct platform_device *pdev;
  	int ret;
@@ -1162,7 +1087,7 @@ static int alienware_alienfx_setup(struct alienfx_platdata *pdata)
  	return 0;
  }
 
-static void alienware_alienfx_exit(struct wmi_device *wdev)
+void alienware_alienfx_exit(struct wmi_device *wdev)
  {
  	struct platform_device *pdev;
 
@@ -1242,12 +1167,12 @@ static struct wmi_driver alienware_legacy_wmi_driver = {
  	.remove = legacy_wmi_remove,
  };
 
-static int __init alienware_legacy_wmi_init(void)
+int __init alienware_legacy_wmi_init(void)
  {
  	return wmi_driver_register(&alienware_legacy_wmi_driver);
  }
 
-static void __exit alienware_legacy_wmi_exit(void)
+void __exit alienware_legacy_wmi_exit(void)
  {
  	wmi_driver_unregister(&alienware_legacy_wmi_driver);
  }
@@ -1333,7 +1258,7 @@ static struct wmi_driver alienware_wmax_wmi_driver = {
  	.remove = wmax_wmi_remove,
  };
 
-static int __init alienware_wmax_wmi_init(void)
+int __init alienware_wmax_wmi_init(void)
  {
  	const struct dmi_system_id *id;
 
@@ -1350,7 +1275,7 @@ static int __init alienware_wmax_wmi_init(void)
  	return wmi_driver_register(&alienware_wmax_wmi_driver);
  }
 
-static void __exit alienware_wmax_wmi_exit(void)
+void __exit alienware_wmax_wmi_exit(void)
  {
  	wmi_driver_unregister(&alienware_wmax_wmi_driver);
  }
drivers/platform/x86/dell/alienware-wmi.h new file +103 -0
new file mode 100644
index 000000000000..78ac10122155
@@ -0,0 +1,103 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/*
+ * Alienware WMI special features driver
+ *
+ * Copyright (C) 2014 Dell Inc <[email protected]>
+ * Copyright (C) 2024 Kurt Borja <[email protected]>
+ */
+
+#ifndef _ALIENWARE_WMI_H_
+#define _ALIENWARE_WMI_H_
+
+#include <linux/leds.h>
+#include <linux/platform_device.h>
+#include <linux/wmi.h>
+
+#define LEGACY_CONTROL_GUID		"A90597CE-A997-11DA-B012-B622A1EF5492"
+#define LEGACY_POWER_CONTROL_GUID	"A80593CE-A997-11DA-B012-B622A1EF5492"
+#define WMAX_CONTROL_GUID		"A70591CE-A997-11DA-B012-B622A1EF5492"
+
+#define WMAX_METHOD_HDMI_SOURCE			0x1
+#define WMAX_METHOD_HDMI_STATUS			0x2
+#define WMAX_METHOD_BRIGHTNESS			0x3
+#define WMAX_METHOD_ZONE_CONTROL		0x4
+#define WMAX_METHOD_HDMI_CABLE			0x5
+#define WMAX_METHOD_AMPLIFIER_CABLE		0x6
+#define WMAX_METHOD_DEEP_SLEEP_CONTROL		0x0B
+#define WMAX_METHOD_DEEP_SLEEP_STATUS		0x0C
+#define WMAX_METHOD_THERMAL_INFORMATION		0x14
+#define WMAX_METHOD_THERMAL_CONTROL		0x15
+#define WMAX_METHOD_GAME_SHIFT_STATUS		0x25
+
+#define WMAX_THERMAL_MODE_GMODE			0xAB
+
+#define WMAX_FAILURE_CODE			0xFFFFFFFF
+
+enum LEGACY_CONTROL_STATES {
+	LEGACY_RUNNING = 1,
+	LEGACY_BOOTING = 0,
+	LEGACY_SUSPEND = 3,
+};
+
+enum WMAX_CONTROL_STATES {
+	WMAX_RUNNING = 0xFF,
+	WMAX_BOOTING = 0,
+	WMAX_SUSPEND = 3,
+};
+
+struct color_platform {
+	u8 blue;
+	u8 green;
+	u8 red;
+} __packed;
+
+struct wmax_brightness_args {
+	u32 led_mask;
+	u32 percentage;
+};
+
+struct legacy_led_args {
+	struct color_platform colors;
+	u8 brightness;
+	u8 state;
+} __packed;
+
+struct wmax_led_args {
+	u32 led_mask;
+	struct color_platform colors;
+	u8 state;
+} __packed;
+
+struct alienfx_priv {
+	struct platform_device *pdev;
+	struct led_classdev global_led;
+	struct color_platform colors[4];
+	u8 global_brightness;
+	u8 lighting_control_state;
+};
+
+struct alienfx_ops {
+	int (*upd_led)(struct alienfx_priv *priv, struct wmi_device *wdev,
+		       u8 location);
+	int (*upd_brightness)(struct alienfx_priv *priv, struct wmi_device *wdev,
+			      u8 brightness);
+};
+
+struct alienfx_platdata {
+	struct wmi_device *wdev;
+	struct alienfx_ops ops;
+};
+
+acpi_status alienware_wmi_command(struct wmi_device *wdev, u32 method_id,
+				  void *in_args, size_t in_size, u32 *out_data);
+
+int alienware_alienfx_setup(struct alienfx_platdata *pdata);
+void alienware_alienfx_exit(struct wmi_device *wdev);
+
+int __init alienware_legacy_wmi_init(void);
+void __exit alienware_legacy_wmi_exit(void);
+
+int __init alienware_wmax_wmi_init(void);
+void __exit alienware_wmax_wmi_exit(void);
+
+#endif
author maintainer
#45 lore raw

PATCH 17/20 platform-x86: Split the alienware-wmi driver

In reply to Kurt Borja

Split alienware-wmi WMI drivers into different files. This is done seamlessly by copying and pasting.

---
 drivers/platform/x86/dell/Makefile            |   2 +
 .../platform/x86/dell/alienware-wmi-base.c    | 596 ------------------
 .../platform/x86/dell/alienware-wmi-legacy.c  |  89 +++
 .../platform/x86/dell/alienware-wmi-wmax.c    | 526 ++++++++++++++++
 4 files changed, 617 insertions(+), 596 deletions(-)
 create mode 100644 drivers/platform/x86/dell/alienware-wmi-legacy.c
 create mode 100644 drivers/platform/x86/dell/alienware-wmi-wmax.c
drivers/platform/x86/dell/Makefile +2 -0
index f8aec8502c2f..03ba459f3d31 100644
@@ -6,6 +6,8 @@
 
 obj-$(CONFIG_ALIENWARE_WMI)		+= alienware-wmi.o
 alienware-wmi-objs			:= alienware-wmi-base.o
+alienware-wmi-y				+= alienware-wmi-legacy.o
+alienware-wmi-y				+= alienware-wmi-wmax.o
 obj-$(CONFIG_DCDBAS)			+= dcdbas.o
 obj-$(CONFIG_DELL_LAPTOP)		+= dell-laptop.o
 obj-$(CONFIG_DELL_RBTN)			+= dell-rbtn.o
drivers/platform/x86/dell/alienware-wmi-base.c +0 -596

639 lines not on this page · raw message

drivers/platform/x86/dell/alienware-wmi-legacy.c new file +89 -0

89 lines not on this page · raw message

drivers/platform/x86/dell/alienware-wmi-wmax.c new file +526 -0

526 lines not on this page · raw message

Signature · 1 line
2.47.1
Reviewed-by on v1 17/20
#46 lore raw

Re: [PATCH 17/20] platform-x86: Split the alienware-wmi driver

Am 21.12.24 um 06:59 schrieb Kurt Borja:

Quoted 2 lines

Split alienware-wmi WMI drivers into different files. This is done seamlessly by copying and pasting.

Quoted 1,298 lines
---
  drivers/platform/x86/dell/Makefile            |   2 +
  .../platform/x86/dell/alienware-wmi-base.c    | 596 ------------------
  .../platform/x86/dell/alienware-wmi-legacy.c  |  89 +++
  .../platform/x86/dell/alienware-wmi-wmax.c    | 526 ++++++++++++++++
  4 files changed, 617 insertions(+), 596 deletions(-)

create mode 100644 drivers/platform/x86/dell/alienware-wmi-legacy.c create mode 100644 drivers/platform/x86/dell/alienware-wmi-wmax.c

drivers/platform/x86/dell/Makefile +2 -0
index f8aec8502c2f..03ba459f3d31 100644
@@ -6,6 +6,8 @@
 
  obj-$(CONFIG_ALIENWARE_WMI)		+= alienware-wmi.o
  alienware-wmi-objs			:= alienware-wmi-base.o
+alienware-wmi-y				+= alienware-wmi-legacy.o
+alienware-wmi-y				+= alienware-wmi-wmax.o
  obj-$(CONFIG_DCDBAS)			+= dcdbas.o
  obj-$(CONFIG_DELL_LAPTOP)		+= dell-laptop.o
  obj-$(CONFIG_DELL_RBTN)			+= dell-rbtn.o
drivers/platform/x86/dell/alienware-wmi-base.c +0 -596
index e8d470bbb608..450ba0a48004 100644
@@ -8,80 +8,21 @@
  #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
 
  #include <linux/acpi.h>
-#include <linux/bitfield.h>
-#include <linux/bits.h>
  #include <linux/module.h>
  #include <linux/platform_device.h>
-#include <linux/platform_profile.h>
  #include <linux/dmi.h>
  #include <linux/leds.h>
-#include <linux/wmi.h>
  #include "alienware-wmi.h"
 
  MODULE_AUTHOR("Mario Limonciello <[email protected]>");
  MODULE_DESCRIPTION("Alienware special feature control");
  MODULE_LICENSE("GPL");
 
-static bool force_platform_profile;
-module_param_unsafe(force_platform_profile, bool, 0);
-MODULE_PARM_DESC(force_platform_profile, "Forces auto-detecting thermal profiles without checking if WMI thermal backend is available");
-
-static bool force_gmode;
-module_param_unsafe(force_gmode, bool, 0);
-MODULE_PARM_DESC(force_gmode, "Forces G-Mode when performance profile is selected");
-
  enum INTERFACE_FLAGS {
  	LEGACY,
  	WMAX,
  };
 
-enum WMAX_THERMAL_INFORMATION_OPERATIONS {
-	WMAX_OPERATION_SYS_DESCRIPTION		= 0x02,
-	WMAX_OPERATION_LIST_IDS			= 0x03,
-	WMAX_OPERATION_CURRENT_PROFILE		= 0x0B,
-};
-
-enum WMAX_THERMAL_CONTROL_OPERATIONS {
-	WMAX_OPERATION_ACTIVATE_PROFILE		= 0x01,
-};
-
-enum WMAX_GAME_SHIFT_STATUS_OPERATIONS {
-	WMAX_OPERATION_TOGGLE_GAME_SHIFT	= 0x01,
-	WMAX_OPERATION_GET_GAME_SHIFT_STATUS	= 0x02,
-};
-
-enum WMAX_THERMAL_TABLES {
-	WMAX_THERMAL_TABLE_BASIC		= 0x90,
-	WMAX_THERMAL_TABLE_USTT			= 0xA0,
-};
-
-enum wmax_thermal_mode {
-	THERMAL_MODE_USTT_BALANCED,
-	THERMAL_MODE_USTT_BALANCED_PERFORMANCE,
-	THERMAL_MODE_USTT_COOL,
-	THERMAL_MODE_USTT_QUIET,
-	THERMAL_MODE_USTT_PERFORMANCE,
-	THERMAL_MODE_USTT_LOW_POWER,
-	THERMAL_MODE_BASIC_QUIET,
-	THERMAL_MODE_BASIC_BALANCED,
-	THERMAL_MODE_BASIC_BALANCED_PERFORMANCE,
-	THERMAL_MODE_BASIC_PERFORMANCE,
-	THERMAL_MODE_LAST,
-};
-
-static const enum platform_profile_option wmax_mode_to_platform_profile[THERMAL_MODE_LAST] = {
-	[THERMAL_MODE_USTT_BALANCED]			= PLATFORM_PROFILE_BALANCED,
-	[THERMAL_MODE_USTT_BALANCED_PERFORMANCE]	= PLATFORM_PROFILE_BALANCED_PERFORMANCE,
-	[THERMAL_MODE_USTT_COOL]			= PLATFORM_PROFILE_COOL,
-	[THERMAL_MODE_USTT_QUIET]			= PLATFORM_PROFILE_QUIET,
-	[THERMAL_MODE_USTT_PERFORMANCE]			= PLATFORM_PROFILE_PERFORMANCE,
-	[THERMAL_MODE_USTT_LOW_POWER]			= PLATFORM_PROFILE_LOW_POWER,
-	[THERMAL_MODE_BASIC_QUIET]			= PLATFORM_PROFILE_QUIET,
-	[THERMAL_MODE_BASIC_BALANCED]			= PLATFORM_PROFILE_BALANCED,
-	[THERMAL_MODE_BASIC_BALANCED_PERFORMANCE]	= PLATFORM_PROFILE_BALANCED_PERFORMANCE,
-	[THERMAL_MODE_BASIC_PERFORMANCE]		= PLATFORM_PROFILE_PERFORMANCE,
-};
-
  struct quirk_entry {
  	u8 num_zones;
  	u8 hdmi_mux;
@@ -213,120 +154,10 @@ static const struct dmi_system_id alienware_quirks[] __initconst = {
  	{}
  };
 
-struct awcc_features {
-	bool gmode;
-};
-
-static struct awcc_features g_series_features = {
-	.gmode = true,
-};
-
-static struct awcc_features x_series_features = {
-	.gmode = false,
-};
-
-static const struct dmi_system_id awcc_dmi_table[] __initconst = {
-	{
-		.ident = "Alienware m17 R5",
-		.matches = {
-			DMI_MATCH(DMI_SYS_VENDOR, "Alienware"),
-			DMI_MATCH(DMI_PRODUCT_NAME, "Alienware m17 R5 AMD"),
-		},
-		.driver_data = &x_series_features,
-	},
-	{
-		.ident = "Alienware m18 R2",
-		.matches = {
-			DMI_MATCH(DMI_SYS_VENDOR, "Alienware"),
-			DMI_MATCH(DMI_PRODUCT_NAME, "Alienware m18 R2"),
-		},
-		.driver_data = &x_series_features,
-	},
-	{
-		.ident = "Alienware x15 R1",
-		.matches = {
-			DMI_MATCH(DMI_SYS_VENDOR, "Alienware"),
-			DMI_MATCH(DMI_PRODUCT_NAME, "Alienware x15 R1"),
-		},
-		.driver_data = &x_series_features,
-	},
-	{
-		.ident = "Alienware x17 R2",
-		.matches = {
-			DMI_MATCH(DMI_SYS_VENDOR, "Alienware"),
-			DMI_MATCH(DMI_PRODUCT_NAME, "Alienware x17 R2"),
-		},
-		.driver_data = &x_series_features,
-	},
-	{
-		.ident = "Dell Inc. G15 5510",
-		.matches = {
-			DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
-			DMI_MATCH(DMI_PRODUCT_NAME, "Dell G15 5510"),
-		},
-		.driver_data = &g_series_features,
-	},
-	{
-		.ident = "Dell Inc. G15 5511",
-		.matches = {
-			DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
-			DMI_MATCH(DMI_PRODUCT_NAME, "Dell G15 5511"),
-		},
-		.driver_data = &g_series_features,
-	},
-	{
-		.ident = "Dell Inc. G15 5515",
-		.matches = {
-			DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
-			DMI_MATCH(DMI_PRODUCT_NAME, "Dell G15 5515"),
-		},
-		.driver_data = &g_series_features,
-	},
-	{
-		.ident = "Dell Inc. G3 3500",
-		.matches = {
-			DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
-			DMI_MATCH(DMI_PRODUCT_NAME, "G3 3500"),
-		},
-		.driver_data = &g_series_features,
-	},
-	{
-		.ident = "Dell Inc. G3 3590",
-		.matches = {
-			DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
-			DMI_MATCH(DMI_PRODUCT_NAME, "G3 3590"),
-		},
-		.driver_data = &g_series_features,
-	},
-	{
-		.ident = "Dell Inc. G5 5500",
-		.matches = {
-			DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
-			DMI_MATCH(DMI_PRODUCT_NAME, "G5 5500"),
-		},
-		.driver_data = &g_series_features,
-	},
-};
-
-struct awcc_features *awcc;
-
  struct wmax_basic_args {
  	u8 arg;
  };
 
-struct wmax_u32_args {
-	u8 operation;
-	u8 arg1;
-	u8 arg2;
-	u8 arg3;
-};
-
-struct awcc_priv {
-	struct wmi_device *wdev;
-	struct platform_profile_handler pp_handler;
-	enum wmax_thermal_mode supported_thermal_profiles[PLATFORM_PROFILE_LAST];
-};
-
  static u8 interface;
 
  acpi_status alienware_wmi_command(struct wmi_device *wdev, u32 method_id,
@@ -775,250 +606,6 @@ static const struct attribute_group deepsleep_attribute_group = {
  	.attrs = deepsleep_attrs,
  };
 
-/*
- * Thermal Profile control
- *  - Provides thermal profile control through the Platform Profile API
- */
-#define WMAX_THERMAL_TABLE_MASK		GENMASK(7, 4)
-#define WMAX_THERMAL_MODE_MASK		GENMASK(3, 0)
-#define WMAX_SENSOR_ID_MASK		BIT(8)
-
-static bool is_wmax_thermal_code(u32 code)
-{
-	if (code & WMAX_SENSOR_ID_MASK)
-		return false;
-
-	if ((code & WMAX_THERMAL_MODE_MASK) >= THERMAL_MODE_LAST)
-		return false;
-
-	if ((code & WMAX_THERMAL_TABLE_MASK) == WMAX_THERMAL_TABLE_BASIC &&
-	    (code & WMAX_THERMAL_MODE_MASK) >= THERMAL_MODE_BASIC_QUIET)
-		return true;
-
-	if ((code & WMAX_THERMAL_TABLE_MASK) == WMAX_THERMAL_TABLE_USTT &&
-	    (code & WMAX_THERMAL_MODE_MASK) <= THERMAL_MODE_USTT_LOW_POWER)
-		return true;
-
-	return false;
-}
-
-static int wmax_thermal_information(struct wmi_device *wdev, u8 operation,
-				    u8 arg, u32 *out_data)
-{
-	struct wmax_u32_args in_args = {
-		.operation = operation,
-		.arg1 = arg,
-		.arg2 = 0,
-		.arg3 = 0,
-	};
-	acpi_status status;
-
-	status = alienware_wmi_command(wdev, WMAX_METHOD_THERMAL_INFORMATION,
-				       &in_args, sizeof(in_args), out_data);
-
-	if (ACPI_FAILURE(status))
-		return -EIO;
-
-	if (*out_data == WMAX_FAILURE_CODE)
-		return -EBADRQC;
-
-	return 0;
-}
-
-static int wmax_thermal_control(struct wmi_device *wdev, u8 profile)
-{
-	struct wmax_u32_args in_args = {
-		.operation = WMAX_OPERATION_ACTIVATE_PROFILE,
-		.arg1 = profile,
-		.arg2 = 0,
-		.arg3 = 0,
-	};
-	acpi_status status;
-	u32 out_data;
-
-	status = alienware_wmi_command(wdev, WMAX_METHOD_THERMAL_CONTROL,
-				       &in_args, sizeof(in_args), &out_data);
-
-	if (ACPI_FAILURE(status))
-		return -EIO;
-
-	if (out_data == WMAX_FAILURE_CODE)
-		return -EBADRQC;
-
-	return 0;
-}
-
-static int wmax_game_shift_status(struct wmi_device *wdev, u8 operation,
-				  u32 *out_data)
-{
-	struct wmax_u32_args in_args = {
-		.operation = operation,
-		.arg1 = 0,
-		.arg2 = 0,
-		.arg3 = 0,
-	};
-	acpi_status status;
-
-	status = alienware_wmi_command(wdev, WMAX_METHOD_GAME_SHIFT_STATUS,
-				       &in_args, sizeof(in_args), out_data);
-
-	if (ACPI_FAILURE(status))
-		return -EIO;
-
-	if (*out_data == WMAX_FAILURE_CODE)
-		return -EOPNOTSUPP;
-
-	return 0;
-}
-
-static int thermal_profile_get(struct platform_profile_handler *pprof,
-			       enum platform_profile_option *profile)
-{
-	struct awcc_priv *priv;
-	u32 out_data;
-	int ret;
-
-	priv = container_of(pprof, struct awcc_priv, pp_handler);
-
-	ret = wmax_thermal_information(priv->wdev, WMAX_OPERATION_CURRENT_PROFILE,
-				       0, &out_data);
-
-	if (ret < 0)
-		return ret;
-
-	if (out_data == WMAX_THERMAL_MODE_GMODE) {
-		*profile = PLATFORM_PROFILE_PERFORMANCE;
-		return 0;
-	}
-
-	if (!is_wmax_thermal_code(out_data))
-		return -ENODATA;
-
-	out_data &= WMAX_THERMAL_MODE_MASK;
-	*profile = wmax_mode_to_platform_profile[out_data];
-
-	return 0;
-}
-
-static int thermal_profile_set(struct platform_profile_handler *pprof,
-			       enum platform_profile_option profile)
-{
-	struct awcc_priv *priv;
-
-	priv = container_of(pprof, struct awcc_priv, pp_handler);
-
-	if (awcc->gmode) {
-		u32 gmode_status;
-		int ret;
-
-		ret = wmax_game_shift_status(priv->wdev,
-					     WMAX_OPERATION_GET_GAME_SHIFT_STATUS,
-					     &gmode_status);
-
-		if (ret < 0)
-			return ret;
-
-		if ((profile == PLATFORM_PROFILE_PERFORMANCE && !gmode_status) ||
-		    (profile != PLATFORM_PROFILE_PERFORMANCE && gmode_status)) {
-			ret = wmax_game_shift_status(priv->wdev,
-						     WMAX_OPERATION_TOGGLE_GAME_SHIFT,
-						     &gmode_status);
-
-			if (ret < 0)
-				return ret;
-		}
-	}
-
-	return wmax_thermal_control(priv->wdev,
-				    priv->supported_thermal_profiles[profile]);
-}
-
-static int create_thermal_profile(struct wmi_device *wdev)
-{
-	enum platform_profile_option profile;
-	enum wmax_thermal_mode mode;
-	struct awcc_priv *priv;
-	u8 sys_desc[4];
-	u32 first_mode;
-	u32 out_data;
-	int ret;
-
-	priv = dev_get_drvdata(&wdev->dev);
-
-	ret = wmax_thermal_information(wdev, WMAX_OPERATION_SYS_DESCRIPTION,
-				       0, (u32 *) &sys_desc);
-	if (ret < 0)
-		return ret;
-
-	first_mode = sys_desc[0] + sys_desc[1];
-
-	for (u32 i = 0; i < sys_desc[3]; i++) {
-		ret = wmax_thermal_information(wdev, WMAX_OPERATION_LIST_IDS,
-					       i + first_mode, &out_data);
-
-		if (ret == -EIO)
-			return ret;
-
-		if (ret == -EBADRQC)
-			break;
-
-		if (!is_wmax_thermal_code(out_data))
-			continue;
-
-		mode = out_data & WMAX_THERMAL_MODE_MASK;
-		profile = wmax_mode_to_platform_profile[mode];
-		priv->supported_thermal_profiles[profile] = out_data;
-
-		set_bit(profile, priv->pp_handler.choices);
-	}
-
-	if (bitmap_empty(priv->pp_handler.choices, PLATFORM_PROFILE_LAST))
-		return -ENODEV;
-
-	if (awcc->gmode) {
-		priv->supported_thermal_profiles[PLATFORM_PROFILE_PERFORMANCE] =
-			WMAX_THERMAL_MODE_GMODE;
-
-		set_bit(PLATFORM_PROFILE_PERFORMANCE, priv->pp_handler.choices);
-	}
-
-	priv->pp_handler.profile_get = thermal_profile_get;
-	priv->pp_handler.profile_set = thermal_profile_set;
-	priv->pp_handler.name = "alienware-wmi";
-	priv->pp_handler.dev = &wdev->dev;
-
-	return platform_profile_register(&priv->pp_handler);
-}
-
-static int alienware_awcc_setup(struct wmi_device *wdev)
-{
-	struct awcc_priv *priv;
-	int ret;
-
-	priv = devm_kzalloc(&wdev->dev, sizeof(*priv), GFP_KERNEL);
-	if (!priv)
-		return -ENOMEM;
-
-	dev_set_drvdata(&wdev->dev, priv);
-
-	priv->wdev = wdev;
-
-	ret = create_thermal_profile(wdev);
-	if (ret < 0)
-		return ret;
-
-	return 0;
-}
-
-static void alienware_awcc_exit(struct wmi_device *wdev)
-{
-	struct awcc_priv *priv;
-
-	priv = dev_get_drvdata(&wdev->dev);
-
-	platform_profile_remove(&priv->pp_handler);
-}
-
  /*
   * Platform Driver
   */
@@ -1097,189 +684,6 @@ void alienware_alienfx_exit(struct wmi_device *wdev)
  	platform_driver_unregister(&platform_driver);
  }
 
-/*
- * Legacy WMI driver
- */
-static int legacy_wmi_update_led(struct alienfx_priv *priv,
-				 struct wmi_device *wdev, u8 location)
-{
-	struct legacy_led_args legacy_args;
-	struct acpi_buffer input;
-	acpi_status status;
-
-	legacy_args.colors = priv->colors[location];
-	legacy_args.brightness = priv->global_brightness;
-	legacy_args.state = priv->lighting_control_state;
-
-	input.length = sizeof(legacy_args);
-	input.pointer = &legacy_args;
-
-	if (legacy_args.state == LEGACY_RUNNING)
-		status = alienware_wmi_command(wdev, location + 1, &legacy_args,
-					       sizeof(legacy_args), NULL);
-	else
-		status = wmi_evaluate_method(LEGACY_POWER_CONTROL_GUID, 0,
-					     location + 1, &input, NULL);
-
-	if (ACPI_FAILURE(status))
-		return -EIO;
-
-	return 0;
-}
-
-static int legacy_wmi_update_brightness(struct alienfx_priv *priv,
-					struct wmi_device *wdev, u8 brightness)
-{
-	return legacy_wmi_update_led(priv, wdev, 0);
-}
-
-static int legacy_wmi_probe(struct wmi_device *wdev, const void *context)
-{
-	struct alienfx_platdata pdata = {
-		.wdev = wdev,
-		.ops = {
-			.upd_led = legacy_wmi_update_led,
-			.upd_brightness = legacy_wmi_update_brightness,
-		},
-	};
-
-	return alienware_alienfx_setup(&pdata);
-}
-
-static void legacy_wmi_remove(struct wmi_device *wdev)
-{
-	alienware_alienfx_exit(wdev);
-}
-
-static struct wmi_device_id alienware_legacy_device_id_table[] = {
-	{ LEGACY_CONTROL_GUID, NULL },
-	{ },
-};
-MODULE_DEVICE_TABLE(wmi, alienware_legacy_device_id_table);
-
-static struct wmi_driver alienware_legacy_wmi_driver = {
-	.driver = {
-		.name = "alienware-wmi-alienfx",
-		.probe_type = PROBE_PREFER_ASYNCHRONOUS,
-	},
-	.id_table = alienware_legacy_device_id_table,
-	.probe = legacy_wmi_probe,
-	.remove = legacy_wmi_remove,
-};
-
-int __init alienware_legacy_wmi_init(void)
-{
-	return wmi_driver_register(&alienware_legacy_wmi_driver);
-}
-
-void __exit alienware_legacy_wmi_exit(void)
-{
-	wmi_driver_unregister(&alienware_legacy_wmi_driver);
-}
-
-/*
- * WMAX WMI driver
- */
-static int wmax_wmi_update_led(struct alienfx_priv *priv,
-			       struct wmi_device *wdev, u8 location)
-{
-	struct wmax_led_args in_args = {
-		.led_mask = 1 << location,
-		.colors = priv->colors[location],
-		.state = priv->lighting_control_state,
-	};
-	acpi_status status;
-
-	status = alienware_wmi_command(wdev, WMAX_METHOD_ZONE_CONTROL,
-				       &in_args, sizeof(in_args), NULL);
-	if (ACPI_FAILURE(status))
-		return -EIO;
-
-	return 0;
-}
-
-static int wmax_wmi_update_brightness(struct alienfx_priv *priv,
-				      struct wmi_device *wdev, u8 brightness)
-{
-	struct wmax_brightness_args in_args = {
-		.led_mask = 0xFF,
-		.percentage = brightness,
-	};
-	acpi_status status;
-
-	status = alienware_wmi_command(wdev, WMAX_METHOD_BRIGHTNESS, &in_args,
-				       sizeof(in_args), NULL);
-	if (ACPI_FAILURE(status))
-		return -EIO;
-
-	return 0;
-}
-
-static int wmax_wmi_probe(struct wmi_device *wdev, const void *context)
-{
-	struct alienfx_platdata pdata = {
-		.wdev = wdev,
-		.ops = {
-			.upd_led = wmax_wmi_update_led,
-			.upd_brightness = wmax_wmi_update_brightness,
-		},
-	};
-	int ret = 0;
-
-	if (awcc)
-		ret = alienware_awcc_setup(wdev);
-	else
-		ret = alienware_alienfx_setup(&pdata);
-
-	return ret;
-}
-
-static void wmax_wmi_remove(struct wmi_device *wdev)
-{
-	if (awcc)
-		alienware_awcc_exit(wdev);
-	else
-		alienware_alienfx_exit(wdev);
-}
-
-static struct wmi_device_id alienware_wmax_device_id_table[] = {
-	{ WMAX_CONTROL_GUID, NULL },
-	{ },
-};
-MODULE_DEVICE_TABLE(wmi, alienware_wmax_device_id_table);
-
-static struct wmi_driver alienware_wmax_wmi_driver = {
-	.driver = {
-		.name = "alienware-wmi-wmax",
-		.probe_type = PROBE_PREFER_ASYNCHRONOUS,
-	},
-	.id_table = alienware_wmax_device_id_table,
-	.probe = wmax_wmi_probe,
-	.remove = wmax_wmi_remove,
-};
-
-int __init alienware_wmax_wmi_init(void)
-{
-	const struct dmi_system_id *id;
-
-	id = dmi_first_match(awcc_dmi_table);
-	if (id)
-		awcc = id->driver_data;
-
-	if (force_platform_profile)
-		awcc = &x_series_features;
-
-	if (force_gmode)
-		awcc = &g_series_features;
-
-	return wmi_driver_register(&alienware_wmax_wmi_driver);
-}
-
-void __exit alienware_wmax_wmi_exit(void)
-{
-	wmi_driver_unregister(&alienware_wmax_wmi_driver);
-}
-
  static int __init alienware_wmi_init(void)
  {
  	int ret;
drivers/platform/x86/dell/alienware-wmi-legacy.c new file +89 -0
new file mode 100644
index 000000000000..38dd2a602f34
@@ -0,0 +1,89 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Alienware LEGACY WMI device driver
+ *
+ * Copyright (C) 2024 Kurt Borja <[email protected]>
+ */
+
+#include <linux/wmi.h>
+#include "alienware-wmi.h"
+
+/*
+ * Legacy WMI driver
+ */
+static int legacy_wmi_update_led(struct alienfx_priv *priv,
+				 struct wmi_device *wdev, u8 location)
+{
+	struct legacy_led_args legacy_args;
+	struct acpi_buffer input;
+	acpi_status status;
+
+	legacy_args.colors = priv->colors[location];
+	legacy_args.brightness = priv->global_brightness;
+	legacy_args.state = priv->lighting_control_state;
+
+	input.length = sizeof(legacy_args);
+	input.pointer = &legacy_args;
+
+	if (legacy_args.state == LEGACY_RUNNING)
+		status = alienware_wmi_command(wdev, location + 1, &legacy_args,
+					       sizeof(legacy_args), NULL);
+	else
+		status = wmi_evaluate_method(LEGACY_POWER_CONTROL_GUID, 0,
+					     location + 1, &input, NULL);
+
+	if (ACPI_FAILURE(status))
+		return -EIO;
+
+	return 0;
+}
+
+static int legacy_wmi_update_brightness(struct alienfx_priv *priv,
+					struct wmi_device *wdev, u8 brightness)
+{
+	return legacy_wmi_update_led(priv, wdev, 0);
+}
+
+static int legacy_wmi_probe(struct wmi_device *wdev, const void *context)
+{
+	struct alienfx_platdata pdata = {
+		.wdev = wdev,
+		.ops = {
+			.upd_led = legacy_wmi_update_led,
+			.upd_brightness = legacy_wmi_update_brightness,
+		},
+	};
+
+	return alienware_alienfx_setup(&pdata);
+}
+
+static void legacy_wmi_remove(struct wmi_device *wdev)
+{
+	alienware_alienfx_exit(wdev);
+}
+
+static struct wmi_device_id alienware_legacy_device_id_table[] = {
+	{ LEGACY_CONTROL_GUID, NULL },
+	{ },
+};
+MODULE_DEVICE_TABLE(wmi, alienware_legacy_device_id_table);
+
+static struct wmi_driver alienware_legacy_wmi_driver = {
+	.driver = {
+		.name = "alienware-wmi-alienfx",
+		.probe_type = PROBE_PREFER_ASYNCHRONOUS,
+	},
+	.id_table = alienware_legacy_device_id_table,
+	.probe = legacy_wmi_probe,
+	.remove = legacy_wmi_remove,
+};
+
+int __init alienware_legacy_wmi_init(void)
+{
+	return wmi_driver_register(&alienware_legacy_wmi_driver);
+}
+
+void __exit alienware_legacy_wmi_exit(void)
+{
+	wmi_driver_unregister(&alienware_legacy_wmi_driver);
+}
drivers/platform/x86/dell/alienware-wmi-wmax.c new file +526 -0
new file mode 100644
index 000000000000..75b9a1f029b2
@@ -0,0 +1,526 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Alienware WMAX WMI device driver
+ *
+ * Copyright (C) 2024 Kurt Borja <[email protected]>
+ */
+
+#include <linux/dmi.h>
+#include <linux/bitfield.h>
+#include <linux/bits.h>
+#include <linux/moduleparam.h>
+#include <linux/platform_profile.h>
+#include <linux/wmi.h>
+#include "alienware-wmi.h"
+
+#define WMAX_THERMAL_TABLE_MASK		GENMASK(7, 4)
+#define WMAX_THERMAL_MODE_MASK		GENMASK(3, 0)
+#define WMAX_SENSOR_ID_MASK		BIT(8)
+
+static bool force_platform_profile;
+module_param_unsafe(force_platform_profile, bool, 0);
+MODULE_PARM_DESC(force_platform_profile, "Forces auto-detecting thermal profiles without checking if WMI thermal backend is available");
+
+static bool force_gmode;
+module_param_unsafe(force_gmode, bool, 0);
+MODULE_PARM_DESC(force_gmode, "Forces G-Mode when performance profile is selected");
+
+enum WMAX_THERMAL_INFORMATION_OPERATIONS {
+	WMAX_OPERATION_SYS_DESCRIPTION		= 0x02,
+	WMAX_OPERATION_LIST_IDS			= 0x03,
+	WMAX_OPERATION_CURRENT_PROFILE		= 0x0B,
+};
+
+enum WMAX_THERMAL_CONTROL_OPERATIONS {
+	WMAX_OPERATION_ACTIVATE_PROFILE		= 0x01,
+};
+
+enum WMAX_GAME_SHIFT_STATUS_OPERATIONS {
+	WMAX_OPERATION_TOGGLE_GAME_SHIFT	= 0x01,
+	WMAX_OPERATION_GET_GAME_SHIFT_STATUS	= 0x02,
+};
+
+enum WMAX_THERMAL_TABLES {
+	WMAX_THERMAL_TABLE_BASIC		= 0x90,
+	WMAX_THERMAL_TABLE_USTT			= 0xA0,
+};
+
+enum wmax_thermal_mode {
+	THERMAL_MODE_USTT_BALANCED,
+	THERMAL_MODE_USTT_BALANCED_PERFORMANCE,
+	THERMAL_MODE_USTT_COOL,
+	THERMAL_MODE_USTT_QUIET,
+	THERMAL_MODE_USTT_PERFORMANCE,
+	THERMAL_MODE_USTT_LOW_POWER,
+	THERMAL_MODE_BASIC_QUIET,
+	THERMAL_MODE_BASIC_BALANCED,
+	THERMAL_MODE_BASIC_BALANCED_PERFORMANCE,
+	THERMAL_MODE_BASIC_PERFORMANCE,
+	THERMAL_MODE_LAST,
+};
+
+struct wmax_u32_args {
+	u8 operation;
+	u8 arg1;
+	u8 arg2;
+	u8 arg3;
+};
+
+struct awcc_priv {
+	struct wmi_device *wdev;
+	struct platform_profile_handler pp_handler;
+	enum wmax_thermal_mode supported_thermal_profiles[PLATFORM_PROFILE_LAST];
+};
+
+struct awcc_features {
+	bool gmode;
+};
+
+static struct awcc_features g_series_features = {
+	.gmode = true,
+};
+
+static struct awcc_features x_series_features = {
+	.gmode = false,
+};
+
+static const struct dmi_system_id awcc_dmi_table[] __initconst = {
+	{
+		.ident = "Alienware m17 R5",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Alienware"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "Alienware m17 R5 AMD"),
+		},
+		.driver_data = &x_series_features,
+	},
+	{
+		.ident = "Alienware m18 R2",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Alienware"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "Alienware m18 R2"),
+		},
+		.driver_data = &x_series_features,
+	},
+	{
+		.ident = "Alienware x15 R1",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Alienware"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "Alienware x15 R1"),
+		},
+		.driver_data = &x_series_features,
+	},
+	{
+		.ident = "Alienware x17 R2",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Alienware"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "Alienware x17 R2"),
+		},
+		.driver_data = &x_series_features,
+	},
+	{
+		.ident = "Dell Inc. G15 5510",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
+			DMI_MATCH(DMI_PRODUCT_NAME, "Dell G15 5510"),
+		},
+		.driver_data = &g_series_features,
+	},
+	{
+		.ident = "Dell Inc. G15 5511",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
+			DMI_MATCH(DMI_PRODUCT_NAME, "Dell G15 5511"),
+		},
+		.driver_data = &g_series_features,
+	},
+	{
+		.ident = "Dell Inc. G15 5515",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
+			DMI_MATCH(DMI_PRODUCT_NAME, "Dell G15 5515"),
+		},
+		.driver_data = &g_series_features,
+	},
+	{
+		.ident = "Dell Inc. G3 3500",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
+			DMI_MATCH(DMI_PRODUCT_NAME, "G3 3500"),
+		},
+		.driver_data = &g_series_features,
+	},
+	{
+		.ident = "Dell Inc. G3 3590",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
+			DMI_MATCH(DMI_PRODUCT_NAME, "G3 3590"),
+		},
+		.driver_data = &g_series_features,
+	},
+	{
+		.ident = "Dell Inc. G5 5500",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
+			DMI_MATCH(DMI_PRODUCT_NAME, "G5 5500"),
+		},
+		.driver_data = &g_series_features,
+	},
+};
+
+static const enum platform_profile_option wmax_mode_to_platform_profile[THERMAL_MODE_LAST] = {
+	[THERMAL_MODE_USTT_BALANCED]			= PLATFORM_PROFILE_BALANCED,
+	[THERMAL_MODE_USTT_BALANCED_PERFORMANCE]	= PLATFORM_PROFILE_BALANCED_PERFORMANCE,
+	[THERMAL_MODE_USTT_COOL]			= PLATFORM_PROFILE_COOL,
+	[THERMAL_MODE_USTT_QUIET]			= PLATFORM_PROFILE_QUIET,
+	[THERMAL_MODE_USTT_PERFORMANCE]			= PLATFORM_PROFILE_PERFORMANCE,
+	[THERMAL_MODE_USTT_LOW_POWER]			= PLATFORM_PROFILE_LOW_POWER,
+	[THERMAL_MODE_BASIC_QUIET]			= PLATFORM_PROFILE_QUIET,
+	[THERMAL_MODE_BASIC_BALANCED]			= PLATFORM_PROFILE_BALANCED,
+	[THERMAL_MODE_BASIC_BALANCED_PERFORMANCE]	= PLATFORM_PROFILE_BALANCED_PERFORMANCE,
+	[THERMAL_MODE_BASIC_PERFORMANCE]		= PLATFORM_PROFILE_PERFORMANCE,
+};
+
+struct awcc_features *awcc;
+
+/*
+ * Thermal Profile control
+ *  - Provides thermal profile control through the Platform Profile API
+ */
+static bool is_wmax_thermal_code(u32 code)
+{
+	if (code & WMAX_SENSOR_ID_MASK)
+		return false;
+
+	if ((code & WMAX_THERMAL_MODE_MASK) >= THERMAL_MODE_LAST)
+		return false;
+
+	if ((code & WMAX_THERMAL_TABLE_MASK) == WMAX_THERMAL_TABLE_BASIC &&
+	    (code & WMAX_THERMAL_MODE_MASK) >= THERMAL_MODE_BASIC_QUIET)
+		return true;
+
+	if ((code & WMAX_THERMAL_TABLE_MASK) == WMAX_THERMAL_TABLE_USTT &&
+	    (code & WMAX_THERMAL_MODE_MASK) <= THERMAL_MODE_USTT_LOW_POWER)
+		return true;
+
+	return false;
+}
+
+static int wmax_thermal_information(struct wmi_device *wdev, u8 operation,
+				    u8 arg, u32 *out_data)
+{
+	struct wmax_u32_args in_args = {
+		.operation = operation,
+		.arg1 = arg,
+		.arg2 = 0,
+		.arg3 = 0,
+	};
+	acpi_status status;
+
+	status = alienware_wmi_command(wdev, WMAX_METHOD_THERMAL_INFORMATION,
+				       &in_args, sizeof(in_args), out_data);
+
+	if (ACPI_FAILURE(status))
+		return -EIO;
+
+	if (*out_data == WMAX_FAILURE_CODE)
+		return -EBADRQC;
+
+	return 0;
+}
+
+static int wmax_thermal_control(struct wmi_device *wdev, u8 profile)
+{
+	struct wmax_u32_args in_args = {
+		.operation = WMAX_OPERATION_ACTIVATE_PROFILE,
+		.arg1 = profile,
+		.arg2 = 0,
+		.arg3 = 0,
+	};
+	acpi_status status;
+	u32 out_data;
+
+	status = alienware_wmi_command(wdev, WMAX_METHOD_THERMAL_CONTROL,
+				       &in_args, sizeof(in_args), &out_data);
+
+	if (ACPI_FAILURE(status))
+		return -EIO;
+
+	if (out_data == WMAX_FAILURE_CODE)
+		return -EBADRQC;
+
+	return 0;
+}
+
+static int wmax_game_shift_status(struct wmi_device *wdev, u8 operation,
+				  u32 *out_data)
+{
+	struct wmax_u32_args in_args = {
+		.operation = operation,
+		.arg1 = 0,
+		.arg2 = 0,
+		.arg3 = 0,
+	};
+	acpi_status status;
+
+	status = alienware_wmi_command(wdev, WMAX_METHOD_GAME_SHIFT_STATUS,
+				       &in_args, sizeof(in_args), out_data);
+
+	if (ACPI_FAILURE(status))
+		return -EIO;
+
+	if (*out_data == WMAX_FAILURE_CODE)
+		return -EOPNOTSUPP;
+
+	return 0;
+}
+
+static int thermal_profile_get(struct platform_profile_handler *pprof,
+			       enum platform_profile_option *profile)
+{
+	struct awcc_priv *priv;
+	u32 out_data;
+	int ret;
+
+	priv = container_of(pprof, struct awcc_priv, pp_handler);
+
+	ret = wmax_thermal_information(priv->wdev, WMAX_OPERATION_CURRENT_PROFILE,
+				       0, &out_data);
+
+	if (ret < 0)
+		return ret;
+
+	if (out_data == WMAX_THERMAL_MODE_GMODE) {
+		*profile = PLATFORM_PROFILE_PERFORMANCE;
+		return 0;
+	}
+
+	if (!is_wmax_thermal_code(out_data))
+		return -ENODATA;
+
+	out_data &= WMAX_THERMAL_MODE_MASK;
+	*profile = wmax_mode_to_platform_profile[out_data];
+
+	return 0;
+}
+
+static int thermal_profile_set(struct platform_profile_handler *pprof,
+			       enum platform_profile_option profile)
+{
+	struct awcc_priv *priv;
+
+	priv = container_of(pprof, struct awcc_priv, pp_handler);
+
+	if (awcc->gmode) {
+		u32 gmode_status;
+		int ret;
+
+		ret = wmax_game_shift_status(priv->wdev,
+					     WMAX_OPERATION_GET_GAME_SHIFT_STATUS,
+					     &gmode_status);
+
+		if (ret < 0)
+			return ret;
+
+		if ((profile == PLATFORM_PROFILE_PERFORMANCE && !gmode_status) ||
+		    (profile != PLATFORM_PROFILE_PERFORMANCE && gmode_status)) {
+			ret = wmax_game_shift_status(priv->wdev,
+						     WMAX_OPERATION_TOGGLE_GAME_SHIFT,
+						     &gmode_status);
+
+			if (ret < 0)
+				return ret;
+		}
+	}
+
+	return wmax_thermal_control(priv->wdev,
+				    priv->supported_thermal_profiles[profile]);
+}
+
+static int create_thermal_profile(struct wmi_device *wdev)
+{
+	enum platform_profile_option profile;
+	enum wmax_thermal_mode mode;
+	struct awcc_priv *priv;
+	u8 sys_desc[4];
+	u32 first_mode;
+	u32 out_data;
+	int ret;
+
+	priv = dev_get_drvdata(&wdev->dev);
+
+	ret = wmax_thermal_information(wdev, WMAX_OPERATION_SYS_DESCRIPTION,
+				       0, (u32 *) &sys_desc);
+	if (ret < 0)
+		return ret;
+
+	first_mode = sys_desc[0] + sys_desc[1];
+
+	for (u32 i = 0; i < sys_desc[3]; i++) {
+		ret = wmax_thermal_information(wdev, WMAX_OPERATION_LIST_IDS,
+					       i + first_mode, &out_data);
+
+		if (ret == -EIO)
+			return ret;
+
+		if (ret == -EBADRQC)
+			break;
+
+		if (!is_wmax_thermal_code(out_data))
+			continue;
+
+		mode = out_data & WMAX_THERMAL_MODE_MASK;
+		profile = wmax_mode_to_platform_profile[mode];
+		priv->supported_thermal_profiles[profile] = out_data;
+
+		set_bit(profile, priv->pp_handler.choices);
+	}
+
+	if (bitmap_empty(priv->pp_handler.choices, PLATFORM_PROFILE_LAST))
+		return -ENODEV;
+
+	if (awcc->gmode) {
+		priv->supported_thermal_profiles[PLATFORM_PROFILE_PERFORMANCE] =
+			WMAX_THERMAL_MODE_GMODE;
+
+		set_bit(PLATFORM_PROFILE_PERFORMANCE, priv->pp_handler.choices);
+	}
+
+	priv->pp_handler.profile_get = thermal_profile_get;
+	priv->pp_handler.profile_set = thermal_profile_set;
+	priv->pp_handler.name = "alienware-wmi";
+	priv->pp_handler.dev = &wdev->dev;
+
+	return platform_profile_register(&priv->pp_handler);
+}
+
+static int alienware_awcc_setup(struct wmi_device *wdev)
+{
+	struct awcc_priv *priv;
+	int ret;
+
+	priv = devm_kzalloc(&wdev->dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	dev_set_drvdata(&wdev->dev, priv);
+
+	priv->wdev = wdev;
+
+	ret = create_thermal_profile(wdev);
+	if (ret < 0)
+		return ret;
+
+	return 0;
+}
+
+static void alienware_awcc_exit(struct wmi_device *wdev)
+{
+	struct awcc_priv *priv;
+
+	priv = dev_get_drvdata(&wdev->dev);
+
+	platform_profile_remove(&priv->pp_handler);
+}
+
+/*
+ * WMAX WMI driver
+ */
+static int wmax_wmi_update_led(struct alienfx_priv *priv,
+			       struct wmi_device *wdev, u8 location)
+{
+	struct wmax_led_args in_args = {
+		.led_mask = 1 << location,
+		.colors = priv->colors[location],
+		.state = priv->lighting_control_state,
+	};
+	acpi_status status;
+
+	status = alienware_wmi_command(wdev, WMAX_METHOD_ZONE_CONTROL,
+				       &in_args, sizeof(in_args), NULL);
+	if (ACPI_FAILURE(status))
+		return -EIO;
+
+	return 0;
+}
+
+static int wmax_wmi_update_brightness(struct alienfx_priv *priv,
+				      struct wmi_device *wdev, u8 brightness)
+{
+	struct wmax_brightness_args in_args = {
+		.led_mask = 0xFF,
+		.percentage = brightness,
+	};
+	acpi_status status;
+
+	status = alienware_wmi_command(wdev, WMAX_METHOD_BRIGHTNESS, &in_args,
+				       sizeof(in_args), NULL);
+	if (ACPI_FAILURE(status))
+		return -EIO;
+
+	return 0;
+}
+
+static int wmax_wmi_probe(struct wmi_device *wdev, const void *context)
+{
+	struct alienfx_platdata pdata = {
+		.wdev = wdev,
+		.ops = {
+			.upd_led = wmax_wmi_update_led,
+			.upd_brightness = wmax_wmi_update_brightness,
+		},
+	};
+	int ret = 0;
+
+	if (awcc)
+		ret = alienware_awcc_setup(wdev);
+	else
+		ret = alienware_alienfx_setup(&pdata);
+
+	return ret;
+}
+
+static void wmax_wmi_remove(struct wmi_device *wdev)
+{
+	if (awcc)
+		alienware_awcc_exit(wdev);
+	else
+		alienware_alienfx_exit(wdev);
+}
+
+static struct wmi_device_id alienware_wmax_device_id_table[] = {
+	{ WMAX_CONTROL_GUID, NULL },
+	{ },
+};
+MODULE_DEVICE_TABLE(wmi, alienware_wmax_device_id_table);
+
+static struct wmi_driver alienware_wmax_wmi_driver = {
+	.driver = {
+		.name = "alienware-wmi-wmax",
+		.probe_type = PROBE_PREFER_ASYNCHRONOUS,
+	},
+	.id_table = alienware_wmax_device_id_table,
+	.probe = wmax_wmi_probe,
+	.remove = wmax_wmi_remove,
+};
+
+int __init alienware_wmax_wmi_init(void)
+{
+	const struct dmi_system_id *id;
+
+	id = dmi_first_match(awcc_dmi_table);
+	if (id)
+		awcc = id->driver_data;
+
+	if (force_platform_profile)
+		awcc = &x_series_features;
+
+	if (force_gmode)
+		awcc = &g_series_features;
+
+	return wmi_driver_register(&alienware_wmax_wmi_driver);
+}
+
+void __exit alienware_wmax_wmi_exit(void)
+{
+	wmi_driver_unregister(&alienware_wmax_wmi_driver);
+}
author maintainer
#47 lore raw

PATCH 18/20 platform/x86: dell: Modify Makefile alignment

In reply to Kurt Borja

Add one more TAB to each line to support upcoming changes.

---
 drivers/platform/x86/dell/Makefile | 48 +++++++++++++++---------------
 1 file changed, 24 insertions(+), 24 deletions(-)
drivers/platform/x86/dell/Makefile +24 -24
index 03ba459f3d31..d5718ef34c48 100644
@@ -4,27 +4,27 @@
 # Dell x86 Platform-Specific Drivers
 #
 
-obj-$(CONFIG_ALIENWARE_WMI)		+= alienware-wmi.o
-alienware-wmi-objs			:= alienware-wmi-base.o
-alienware-wmi-y				+= alienware-wmi-legacy.o
-alienware-wmi-y				+= alienware-wmi-wmax.o
-obj-$(CONFIG_DCDBAS)			+= dcdbas.o
-obj-$(CONFIG_DELL_LAPTOP)		+= dell-laptop.o
-obj-$(CONFIG_DELL_RBTN)			+= dell-rbtn.o
-obj-$(CONFIG_DELL_RBU)			+= dell_rbu.o
-obj-$(CONFIG_DELL_PC)			+= dell-pc.o
-obj-$(CONFIG_DELL_SMBIOS)		+= dell-smbios.o
-dell-smbios-objs			:= dell-smbios-base.o
-dell-smbios-$(CONFIG_DELL_SMBIOS_WMI)	+= dell-smbios-wmi.o
-dell-smbios-$(CONFIG_DELL_SMBIOS_SMM)	+= dell-smbios-smm.o
-obj-$(CONFIG_DELL_SMO8800)		+= dell-smo8800.o
-obj-$(CONFIG_DELL_SMO8800)		+= dell-lis3lv02d.o
-obj-$(CONFIG_DELL_UART_BACKLIGHT)	+= dell-uart-backlight.o
-obj-$(CONFIG_DELL_WMI)			+= dell-wmi.o
-dell-wmi-objs				:= dell-wmi-base.o
-dell-wmi-$(CONFIG_DELL_WMI_PRIVACY)	+= dell-wmi-privacy.o
-obj-$(CONFIG_DELL_WMI_AIO)		+= dell-wmi-aio.o
-obj-$(CONFIG_DELL_WMI_DESCRIPTOR)	+= dell-wmi-descriptor.o
-obj-$(CONFIG_DELL_WMI_DDV)		+= dell-wmi-ddv.o
-obj-$(CONFIG_DELL_WMI_LED)		+= dell-wmi-led.o
-obj-$(CONFIG_DELL_WMI_SYSMAN)		+= dell-wmi-sysman/
+obj-$(CONFIG_ALIENWARE_WMI)			+= alienware-wmi.o
+alienware-wmi-objs				:= alienware-wmi-base.o
+alienware-wmi-y					+= alienware-wmi-legacy.o
+alienware-wmi-y					+= alienware-wmi-wmax.o
+obj-$(CONFIG_DCDBAS)				+= dcdbas.o
+obj-$(CONFIG_DELL_LAPTOP)			+= dell-laptop.o
+obj-$(CONFIG_DELL_RBTN)				+= dell-rbtn.o
+obj-$(CONFIG_DELL_RBU)				+= dell_rbu.o
+obj-$(CONFIG_DELL_PC)				+= dell-pc.o
+obj-$(CONFIG_DELL_SMBIOS)			+= dell-smbios.o
+dell-smbios-objs				:= dell-smbios-base.o
+dell-smbios-$(CONFIG_DELL_SMBIOS_WMI)		+= dell-smbios-wmi.o
+dell-smbios-$(CONFIG_DELL_SMBIOS_SMM)		+= dell-smbios-smm.o
+obj-$(CONFIG_DELL_SMO8800)			+= dell-smo8800.o
+obj-$(CONFIG_DELL_SMO8800)			+= dell-lis3lv02d.o
+obj-$(CONFIG_DELL_UART_BACKLIGHT)		+= dell-uart-backlight.o
+obj-$(CONFIG_DELL_WMI)				+= dell-wmi.o
+dell-wmi-objs					:= dell-wmi-base.o
+dell-wmi-$(CONFIG_DELL_WMI_PRIVACY)		+= dell-wmi-privacy.o
+obj-$(CONFIG_DELL_WMI_AIO)			+= dell-wmi-aio.o
+obj-$(CONFIG_DELL_WMI_DESCRIPTOR)		+= dell-wmi-descriptor.o
+obj-$(CONFIG_DELL_WMI_DDV)			+= dell-wmi-ddv.o
+obj-$(CONFIG_DELL_WMI_LED)			+= dell-wmi-led.o
+obj-$(CONFIG_DELL_WMI_SYSMAN)			+= dell-wmi-sysman/
Signature · 1 line
2.47.1
#48 lore raw

Re: [PATCH 18/20] platform/x86: dell: Modify Makefile alignment

Am 21.12.24 um 06:59 schrieb Kurt Borja:

Quoted 1 line

Add one more TAB to each line to support upcoming changes.

Please merge this with patch 19.

Thanks,
Armin Wolf

Quoted 62 lines
---
  drivers/platform/x86/dell/Makefile | 48 +++++++++++++++---------------
  1 file changed, 24 insertions(+), 24 deletions(-)
drivers/platform/x86/dell/Makefile +24 -24
index 03ba459f3d31..d5718ef34c48 100644
@@ -4,27 +4,27 @@
  # Dell x86 Platform-Specific Drivers
  #
 
-obj-$(CONFIG_ALIENWARE_WMI)		+= alienware-wmi.o
-alienware-wmi-objs			:= alienware-wmi-base.o
-alienware-wmi-y				+= alienware-wmi-legacy.o
-alienware-wmi-y				+= alienware-wmi-wmax.o
-obj-$(CONFIG_DCDBAS)			+= dcdbas.o
-obj-$(CONFIG_DELL_LAPTOP)		+= dell-laptop.o
-obj-$(CONFIG_DELL_RBTN)			+= dell-rbtn.o
-obj-$(CONFIG_DELL_RBU)			+= dell_rbu.o
-obj-$(CONFIG_DELL_PC)			+= dell-pc.o
-obj-$(CONFIG_DELL_SMBIOS)		+= dell-smbios.o
-dell-smbios-objs			:= dell-smbios-base.o
-dell-smbios-$(CONFIG_DELL_SMBIOS_WMI)	+= dell-smbios-wmi.o
-dell-smbios-$(CONFIG_DELL_SMBIOS_SMM)	+= dell-smbios-smm.o
-obj-$(CONFIG_DELL_SMO8800)		+= dell-smo8800.o
-obj-$(CONFIG_DELL_SMO8800)		+= dell-lis3lv02d.o
-obj-$(CONFIG_DELL_UART_BACKLIGHT)	+= dell-uart-backlight.o
-obj-$(CONFIG_DELL_WMI)			+= dell-wmi.o
-dell-wmi-objs				:= dell-wmi-base.o
-dell-wmi-$(CONFIG_DELL_WMI_PRIVACY)	+= dell-wmi-privacy.o
-obj-$(CONFIG_DELL_WMI_AIO)		+= dell-wmi-aio.o
-obj-$(CONFIG_DELL_WMI_DESCRIPTOR)	+= dell-wmi-descriptor.o
-obj-$(CONFIG_DELL_WMI_DDV)		+= dell-wmi-ddv.o
-obj-$(CONFIG_DELL_WMI_LED)		+= dell-wmi-led.o
-obj-$(CONFIG_DELL_WMI_SYSMAN)		+= dell-wmi-sysman/
+obj-$(CONFIG_ALIENWARE_WMI)			+= alienware-wmi.o
+alienware-wmi-objs				:= alienware-wmi-base.o
+alienware-wmi-y					+= alienware-wmi-legacy.o
+alienware-wmi-y					+= alienware-wmi-wmax.o
+obj-$(CONFIG_DCDBAS)				+= dcdbas.o
+obj-$(CONFIG_DELL_LAPTOP)			+= dell-laptop.o
+obj-$(CONFIG_DELL_RBTN)				+= dell-rbtn.o
+obj-$(CONFIG_DELL_RBU)				+= dell_rbu.o
+obj-$(CONFIG_DELL_PC)				+= dell-pc.o
+obj-$(CONFIG_DELL_SMBIOS)			+= dell-smbios.o
+dell-smbios-objs				:= dell-smbios-base.o
+dell-smbios-$(CONFIG_DELL_SMBIOS_WMI)		+= dell-smbios-wmi.o
+dell-smbios-$(CONFIG_DELL_SMBIOS_SMM)		+= dell-smbios-smm.o
+obj-$(CONFIG_DELL_SMO8800)			+= dell-smo8800.o
+obj-$(CONFIG_DELL_SMO8800)			+= dell-lis3lv02d.o
+obj-$(CONFIG_DELL_UART_BACKLIGHT)		+= dell-uart-backlight.o
+obj-$(CONFIG_DELL_WMI)				+= dell-wmi.o
+dell-wmi-objs					:= dell-wmi-base.o
+dell-wmi-$(CONFIG_DELL_WMI_PRIVACY)		+= dell-wmi-privacy.o
+obj-$(CONFIG_DELL_WMI_AIO)			+= dell-wmi-aio.o
+obj-$(CONFIG_DELL_WMI_DESCRIPTOR)		+= dell-wmi-descriptor.o
+obj-$(CONFIG_DELL_WMI_DDV)			+= dell-wmi-ddv.o
+obj-$(CONFIG_DELL_WMI_LED)			+= dell-wmi-led.o
+obj-$(CONFIG_DELL_WMI_SYSMAN)			+= dell-wmi-sysman/
author maintainer
#49 lore raw

Re: [PATCH 18/20] platform/x86: dell: Modify Makefile alignment

Quoted 5 lines · Armin Wolf

Am 21.12.24 um 06:59 schrieb Kurt Borja:

Quoted 1 line

Add one more TAB to each line to support upcoming changes.

Please merge this with patch 19.

I'm almost certain I read an email in the lists, in which a maintainer asked these to be separate changes.

I have no problem with stashing them tho.

Quoted 66 lines

Thanks,
Armin Wolf

Quoted 62 lines
---
  drivers/platform/x86/dell/Makefile | 48 +++++++++++++++---------------
  1 file changed, 24 insertions(+), 24 deletions(-)
drivers/platform/x86/dell/Makefile +24 -24
index 03ba459f3d31..d5718ef34c48 100644
@@ -4,27 +4,27 @@
  # Dell x86 Platform-Specific Drivers
  #
 
-obj-$(CONFIG_ALIENWARE_WMI)		+= alienware-wmi.o
-alienware-wmi-objs			:= alienware-wmi-base.o
-alienware-wmi-y				+= alienware-wmi-legacy.o
-alienware-wmi-y				+= alienware-wmi-wmax.o
-obj-$(CONFIG_DCDBAS)			+= dcdbas.o
-obj-$(CONFIG_DELL_LAPTOP)		+= dell-laptop.o
-obj-$(CONFIG_DELL_RBTN)			+= dell-rbtn.o
-obj-$(CONFIG_DELL_RBU)			+= dell_rbu.o
-obj-$(CONFIG_DELL_PC)			+= dell-pc.o
-obj-$(CONFIG_DELL_SMBIOS)		+= dell-smbios.o
-dell-smbios-objs			:= dell-smbios-base.o
-dell-smbios-$(CONFIG_DELL_SMBIOS_WMI)	+= dell-smbios-wmi.o
-dell-smbios-$(CONFIG_DELL_SMBIOS_SMM)	+= dell-smbios-smm.o
-obj-$(CONFIG_DELL_SMO8800)		+= dell-smo8800.o
-obj-$(CONFIG_DELL_SMO8800)		+= dell-lis3lv02d.o
-obj-$(CONFIG_DELL_UART_BACKLIGHT)	+= dell-uart-backlight.o
-obj-$(CONFIG_DELL_WMI)			+= dell-wmi.o
-dell-wmi-objs				:= dell-wmi-base.o
-dell-wmi-$(CONFIG_DELL_WMI_PRIVACY)	+= dell-wmi-privacy.o
-obj-$(CONFIG_DELL_WMI_AIO)		+= dell-wmi-aio.o
-obj-$(CONFIG_DELL_WMI_DESCRIPTOR)	+= dell-wmi-descriptor.o
-obj-$(CONFIG_DELL_WMI_DDV)		+= dell-wmi-ddv.o
-obj-$(CONFIG_DELL_WMI_LED)		+= dell-wmi-led.o
-obj-$(CONFIG_DELL_WMI_SYSMAN)		+= dell-wmi-sysman/
+obj-$(CONFIG_ALIENWARE_WMI)			+= alienware-wmi.o
+alienware-wmi-objs				:= alienware-wmi-base.o
+alienware-wmi-y					+= alienware-wmi-legacy.o
+alienware-wmi-y					+= alienware-wmi-wmax.o
+obj-$(CONFIG_DCDBAS)				+= dcdbas.o
+obj-$(CONFIG_DELL_LAPTOP)			+= dell-laptop.o
+obj-$(CONFIG_DELL_RBTN)				+= dell-rbtn.o
+obj-$(CONFIG_DELL_RBU)				+= dell_rbu.o
+obj-$(CONFIG_DELL_PC)				+= dell-pc.o
+obj-$(CONFIG_DELL_SMBIOS)			+= dell-smbios.o
+dell-smbios-objs				:= dell-smbios-base.o
+dell-smbios-$(CONFIG_DELL_SMBIOS_WMI)		+= dell-smbios-wmi.o
+dell-smbios-$(CONFIG_DELL_SMBIOS_SMM)		+= dell-smbios-smm.o
+obj-$(CONFIG_DELL_SMO8800)			+= dell-smo8800.o
+obj-$(CONFIG_DELL_SMO8800)			+= dell-lis3lv02d.o
+obj-$(CONFIG_DELL_UART_BACKLIGHT)		+= dell-uart-backlight.o
+obj-$(CONFIG_DELL_WMI)				+= dell-wmi.o
+dell-wmi-objs					:= dell-wmi-base.o
+dell-wmi-$(CONFIG_DELL_WMI_PRIVACY)		+= dell-wmi-privacy.o
+obj-$(CONFIG_DELL_WMI_AIO)			+= dell-wmi-aio.o
+obj-$(CONFIG_DELL_WMI_DESCRIPTOR)		+= dell-wmi-descriptor.o
+obj-$(CONFIG_DELL_WMI_DDV)			+= dell-wmi-ddv.o
+obj-$(CONFIG_DELL_WMI_LED)			+= dell-wmi-led.o
+obj-$(CONFIG_DELL_WMI_SYSMAN)			+= dell-wmi-sysman/
Reviewed-by
#50 lore raw

Re: [PATCH 18/20] platform/x86: dell: Modify Makefile alignment

Am 27.12.24 um 05:57 schrieb Kurt Borja:

Quoted 9 lines · Armin Wolf
Quoted 4 lines

Am 21.12.24 um 06:59 schrieb Kurt Borja:

Quoted 1 line

Add one more TAB to each line to support upcoming changes.

Please merge this with patch 19.

I'm almost certain I read an email in the lists, in which a maintainer asked these to be separate changes.

I have no problem with stashing them tho.

I was not aware of that email.

In this case:

Quoted 64 lines
Quoted 64 lines

Thanks,
Armin Wolf

Quoted 61 lines
---
   drivers/platform/x86/dell/Makefile | 48 +++++++++++++++---------------
   1 file changed, 24 insertions(+), 24 deletions(-)
drivers/platform/x86/dell/Makefile +24 -24
index 03ba459f3d31..d5718ef34c48 100644
@@ -4,27 +4,27 @@
   # Dell x86 Platform-Specific Drivers
   #
 
-obj-$(CONFIG_ALIENWARE_WMI)		+= alienware-wmi.o
-alienware-wmi-objs			:= alienware-wmi-base.o
-alienware-wmi-y				+= alienware-wmi-legacy.o
-alienware-wmi-y				+= alienware-wmi-wmax.o
-obj-$(CONFIG_DCDBAS)			+= dcdbas.o
-obj-$(CONFIG_DELL_LAPTOP)		+= dell-laptop.o
-obj-$(CONFIG_DELL_RBTN)			+= dell-rbtn.o
-obj-$(CONFIG_DELL_RBU)			+= dell_rbu.o
-obj-$(CONFIG_DELL_PC)			+= dell-pc.o
-obj-$(CONFIG_DELL_SMBIOS)		+= dell-smbios.o
-dell-smbios-objs			:= dell-smbios-base.o
-dell-smbios-$(CONFIG_DELL_SMBIOS_WMI)	+= dell-smbios-wmi.o
-dell-smbios-$(CONFIG_DELL_SMBIOS_SMM)	+= dell-smbios-smm.o
-obj-$(CONFIG_DELL_SMO8800)		+= dell-smo8800.o
-obj-$(CONFIG_DELL_SMO8800)		+= dell-lis3lv02d.o
-obj-$(CONFIG_DELL_UART_BACKLIGHT)	+= dell-uart-backlight.o
-obj-$(CONFIG_DELL_WMI)			+= dell-wmi.o
-dell-wmi-objs				:= dell-wmi-base.o
-dell-wmi-$(CONFIG_DELL_WMI_PRIVACY)	+= dell-wmi-privacy.o
-obj-$(CONFIG_DELL_WMI_AIO)		+= dell-wmi-aio.o
-obj-$(CONFIG_DELL_WMI_DESCRIPTOR)	+= dell-wmi-descriptor.o
-obj-$(CONFIG_DELL_WMI_DDV)		+= dell-wmi-ddv.o
-obj-$(CONFIG_DELL_WMI_LED)		+= dell-wmi-led.o
-obj-$(CONFIG_DELL_WMI_SYSMAN)		+= dell-wmi-sysman/
+obj-$(CONFIG_ALIENWARE_WMI)			+= alienware-wmi.o
+alienware-wmi-objs				:= alienware-wmi-base.o
+alienware-wmi-y					+= alienware-wmi-legacy.o
+alienware-wmi-y					+= alienware-wmi-wmax.o
+obj-$(CONFIG_DCDBAS)				+= dcdbas.o
+obj-$(CONFIG_DELL_LAPTOP)			+= dell-laptop.o
+obj-$(CONFIG_DELL_RBTN)				+= dell-rbtn.o
+obj-$(CONFIG_DELL_RBU)				+= dell_rbu.o
+obj-$(CONFIG_DELL_PC)				+= dell-pc.o
+obj-$(CONFIG_DELL_SMBIOS)			+= dell-smbios.o
+dell-smbios-objs				:= dell-smbios-base.o
+dell-smbios-$(CONFIG_DELL_SMBIOS_WMI)		+= dell-smbios-wmi.o
+dell-smbios-$(CONFIG_DELL_SMBIOS_SMM)		+= dell-smbios-smm.o
+obj-$(CONFIG_DELL_SMO8800)			+= dell-smo8800.o
+obj-$(CONFIG_DELL_SMO8800)			+= dell-lis3lv02d.o
+obj-$(CONFIG_DELL_UART_BACKLIGHT)		+= dell-uart-backlight.o
+obj-$(CONFIG_DELL_WMI)				+= dell-wmi.o
+dell-wmi-objs					:= dell-wmi-base.o
+dell-wmi-$(CONFIG_DELL_WMI_PRIVACY)		+= dell-wmi-privacy.o
+obj-$(CONFIG_DELL_WMI_AIO)			+= dell-wmi-aio.o
+obj-$(CONFIG_DELL_WMI_DESCRIPTOR)		+= dell-wmi-descriptor.o
+obj-$(CONFIG_DELL_WMI_DDV)			+= dell-wmi-ddv.o
+obj-$(CONFIG_DELL_WMI_LED)			+= dell-wmi-led.o
+obj-$(CONFIG_DELL_WMI_SYSMAN)			+= dell-wmi-sysman/
author maintainer
#51 lore raw

PATCH 19/20 platform/x86: Update alienware-wmi config entries

In reply to Kurt Borja

Add config entries for each WMI driver managed by the alienware-wmi module to be able to conditionally compile them.

---
 drivers/platform/x86/dell/Kconfig         | 30 +++++++++++++++++++----
 drivers/platform/x86/dell/Makefile        |  4 +--
 drivers/platform/x86/dell/alienware-wmi.h | 23 +++++++++++++++++
 3 files changed, 50 insertions(+), 7 deletions(-)
drivers/platform/x86/dell/Kconfig +25 -5
index d09060aedd3f..f8a0dffcaab7 100644
@@ -18,15 +18,35 @@ config ALIENWARE_WMI
 	tristate "Alienware Special feature control"
 	default m
 	depends on ACPI
+	depends on ACPI_WMI
+	depends on DMI
 	depends on LEDS_CLASS
 	depends on NEW_LEDS
-	depends on ACPI_WMI
+	help
+	 This is a driver for controlling Alienware WMI driven features.
+
+	 On legacy devices, it exposes an interface for controlling the AlienFX
+	 zones on Alienware machines that don't contain a dedicated
+	 AlienFX USB MCU such as the X51 and X51-R2.
+
+	 On newer devices, it exposes the AWCC thermal control interface through
+	 known Kernel APIs.
+
+config ALIENWARE_WMI_LEGACY
+	bool "Alienware Legacy WMI device driver"
+	default y
+	depends on ALIENWARE_WMI
+	help
+	 Legacy Alienware WMI driver with AlienFX LED control capabilities.
+
+config ALIENWARE_WMI_WMAX
+	bool "Alienware WMAX WMI device driver"
+	default y
+	depends on ALIENWARE_WMI
 	select ACPI_PLATFORM_PROFILE
 	help
-	 This is a driver for controlling Alienware BIOS driven
-	 features.  It exposes an interface for controlling the AlienFX
-	 zones on Alienware machines that don't contain a dedicated AlienFX
-	 USB MCU such as the X51 and X51-R2.
+	 Alienware WMI driver with AlienFX LED, HDMI, amplifier, deep sleep and
+	 AWCC thermal control capabilities.
 
 config DCDBAS
 	tristate "Dell Systems Management Base Driver"
drivers/platform/x86/dell/Makefile +2 -2
index d5718ef34c48..8ac9a933c770 100644
@@ -6,8 +6,8 @@
 
 obj-$(CONFIG_ALIENWARE_WMI)			+= alienware-wmi.o
 alienware-wmi-objs				:= alienware-wmi-base.o
-alienware-wmi-y					+= alienware-wmi-legacy.o
-alienware-wmi-y					+= alienware-wmi-wmax.o
+alienware-wmi-$(CONFIG_ALIENWARE_WMI_LEGACY)	+= alienware-wmi-legacy.o
+alienware-wmi-$(CONFIG_ALIENWARE_WMI_WMAX)	+= alienware-wmi-wmax.o
 obj-$(CONFIG_DCDBAS)				+= dcdbas.o
 obj-$(CONFIG_DELL_LAPTOP)			+= dell-laptop.o
 obj-$(CONFIG_DELL_RBTN)				+= dell-rbtn.o
drivers/platform/x86/dell/alienware-wmi.h +23 -0
index 78ac10122155..97b52e51cd7d 100644
@@ -94,10 +94,33 @@ acpi_status alienware_wmi_command(struct wmi_device *wdev, u32 method_id,
 int alienware_alienfx_setup(struct alienfx_platdata *pdata);
 void alienware_alienfx_exit(struct wmi_device *wdev);
 
+#if IS_ENABLED(CONFIG_ALIENWARE_WMI_LEGACY)
 int __init alienware_legacy_wmi_init(void);
 void __exit alienware_legacy_wmi_exit(void);
+#else
+int __init alienware_legacy_wmi_init(void)
+{
+	return 0;
+}
+
+void __exit alienware_legacy_wmi_exit(void)
+{
+}
+#endif
 
+#if IS_ENABLED(CONFIG_ALIENWARE_WMI_WMAX)
 int __init alienware_wmax_wmi_init(void);
 void __exit alienware_wmax_wmi_exit(void);
+#else
+int __init alienware_wmax_wmi_init(void)
+{
+	return 0;
+}
+
+
+void __exit alienware_wmax_wmi_exit(void)
+{
+}
+#endif
 
 #endif
Signature · 1 line
2.47.1
#52 lore raw

Re: [PATCH 19/20] platform/x86: Update alienware-wmi config entries

Am 21.12.24 um 06:59 schrieb Kurt Borja:

Quoted 75 lines

Add config entries for each WMI driver managed by the alienware-wmi module to be able to conditionally compile them.

---
  drivers/platform/x86/dell/Kconfig         | 30 +++++++++++++++++++----
  drivers/platform/x86/dell/Makefile        |  4 +--
  drivers/platform/x86/dell/alienware-wmi.h | 23 +++++++++++++++++
  3 files changed, 50 insertions(+), 7 deletions(-)
drivers/platform/x86/dell/Kconfig +25 -5
index d09060aedd3f..f8a0dffcaab7 100644
@@ -18,15 +18,35 @@ config ALIENWARE_WMI
  	tristate "Alienware Special feature control"
  	default m
  	depends on ACPI
+	depends on ACPI_WMI
+	depends on DMI
  	depends on LEDS_CLASS
  	depends on NEW_LEDS
-	depends on ACPI_WMI
+	help
+	 This is a driver for controlling Alienware WMI driven features.
+
+	 On legacy devices, it exposes an interface for controlling the AlienFX
+	 zones on Alienware machines that don't contain a dedicated
+	 AlienFX USB MCU such as the X51 and X51-R2.
+
+	 On newer devices, it exposes the AWCC thermal control interface through
+	 known Kernel APIs.
+
+config ALIENWARE_WMI_LEGACY
+	bool "Alienware Legacy WMI device driver"
+	default y
+	depends on ALIENWARE_WMI
+	help
+	 Legacy Alienware WMI driver with AlienFX LED control capabilities.
+
+config ALIENWARE_WMI_WMAX
+	bool "Alienware WMAX WMI device driver"
+	default y
+	depends on ALIENWARE_WMI
  	select ACPI_PLATFORM_PROFILE
  	help
-	 This is a driver for controlling Alienware BIOS driven
-	 features.  It exposes an interface for controlling the AlienFX
-	 zones on Alienware machines that don't contain a dedicated AlienFX
-	 USB MCU such as the X51 and X51-R2.
+	 Alienware WMI driver with AlienFX LED, HDMI, amplifier, deep sleep and
+	 AWCC thermal control capabilities.
 
  config DCDBAS
  	tristate "Dell Systems Management Base Driver"
drivers/platform/x86/dell/Makefile +2 -2
index d5718ef34c48..8ac9a933c770 100644
@@ -6,8 +6,8 @@
 
  obj-$(CONFIG_ALIENWARE_WMI)			+= alienware-wmi.o
  alienware-wmi-objs				:= alienware-wmi-base.o
-alienware-wmi-y					+= alienware-wmi-legacy.o
-alienware-wmi-y					+= alienware-wmi-wmax.o
+alienware-wmi-$(CONFIG_ALIENWARE_WMI_LEGACY)	+= alienware-wmi-legacy.o
+alienware-wmi-$(CONFIG_ALIENWARE_WMI_WMAX)	+= alienware-wmi-wmax.o
  obj-$(CONFIG_DCDBAS)				+= dcdbas.o
  obj-$(CONFIG_DELL_LAPTOP)			+= dell-laptop.o
  obj-$(CONFIG_DELL_RBTN)				+= dell-rbtn.o
drivers/platform/x86/dell/alienware-wmi.h +0 -0
index 78ac10122155..97b52e51cd7d 100644

drivers/platform/x86/dell/alienware-wmi.h acpi_status alienware_wmi_command(struct wmi_device *wdev, u32 method_id, · line 103

Quoted 10 lines
drivers/platform/x86/dell/alienware-wmi.h +5 -0
@@ -94,10 +94,33 @@ acpi_status alienware_wmi_command(struct wmi_device *wdev, u32 method_id,
  int alienware_alienfx_setup(struct alienfx_platdata *pdata);
  void alienware_alienfx_exit(struct wmi_device *wdev);
 
+#if IS_ENABLED(CONFIG_ALIENWARE_WMI_LEGACY)
  int __init alienware_legacy_wmi_init(void);
  void __exit alienware_legacy_wmi_exit(void);
+#else
+int __init alienware_legacy_wmi_init(void)
+{
+	return 0;

Please return -EOPNOTSUPP here.

Quoted 4 lines
drivers/platform/x86/dell/alienware-wmi.h +4 -0
+}
+
+void __exit alienware_legacy_wmi_exit(void)
+{

drivers/platform/x86/dell/alienware-wmi.h acpi_status alienware_wmi_command(struct wmi_device *wdev, u32 method_id, · line 117

Quoted 10 lines
drivers/platform/x86/dell/alienware-wmi.h +7 -0
+}
+#endif
 
+#if IS_ENABLED(CONFIG_ALIENWARE_WMI_WMAX)
  int __init alienware_wmax_wmi_init(void);
  void __exit alienware_wmax_wmi_exit(void);
+#else
+int __init alienware_wmax_wmi_init(void)
+{
+	return 0;

Same as above.

Thanks,
Armin Wolf

Quoted 9 lines
drivers/platform/x86/dell/alienware-wmi.h +7 -0
+}
+
+
+void __exit alienware_wmax_wmi_exit(void)
+{
+}
+#endif
 
  #endif
author maintainer
#53 lore raw

Re: [PATCH 19/20] platform/x86: Update alienware-wmi config entries

Quoted 80 lines · Armin Wolf

Am 21.12.24 um 06:59 schrieb Kurt Borja:

Quoted 78 lines

Add config entries for each WMI driver managed by the alienware-wmi module to be able to conditionally compile them.

---
  drivers/platform/x86/dell/Kconfig         | 30 +++++++++++++++++++----
  drivers/platform/x86/dell/Makefile        |  4 +--
  drivers/platform/x86/dell/alienware-wmi.h | 23 +++++++++++++++++
  3 files changed, 50 insertions(+), 7 deletions(-)
drivers/platform/x86/dell/Kconfig +25 -5
index d09060aedd3f..f8a0dffcaab7 100644
@@ -18,15 +18,35 @@ config ALIENWARE_WMI
  	tristate "Alienware Special feature control"
  	default m
  	depends on ACPI
+	depends on ACPI_WMI
+	depends on DMI
  	depends on LEDS_CLASS
  	depends on NEW_LEDS
-	depends on ACPI_WMI
+	help
+	 This is a driver for controlling Alienware WMI driven features.
+
+	 On legacy devices, it exposes an interface for controlling the AlienFX
+	 zones on Alienware machines that don't contain a dedicated
+	 AlienFX USB MCU such as the X51 and X51-R2.
+
+	 On newer devices, it exposes the AWCC thermal control interface through
+	 known Kernel APIs.
+
+config ALIENWARE_WMI_LEGACY
+	bool "Alienware Legacy WMI device driver"
+	default y
+	depends on ALIENWARE_WMI
+	help
+	 Legacy Alienware WMI driver with AlienFX LED control capabilities.
+
+config ALIENWARE_WMI_WMAX
+	bool "Alienware WMAX WMI device driver"
+	default y
+	depends on ALIENWARE_WMI
  	select ACPI_PLATFORM_PROFILE
  	help
-	 This is a driver for controlling Alienware BIOS driven
-	 features.  It exposes an interface for controlling the AlienFX
-	 zones on Alienware machines that don't contain a dedicated AlienFX
-	 USB MCU such as the X51 and X51-R2.
+	 Alienware WMI driver with AlienFX LED, HDMI, amplifier, deep sleep and
+	 AWCC thermal control capabilities.
 
  config DCDBAS
  	tristate "Dell Systems Management Base Driver"
drivers/platform/x86/dell/Makefile +2 -2
index d5718ef34c48..8ac9a933c770 100644
@@ -6,8 +6,8 @@
 
  obj-$(CONFIG_ALIENWARE_WMI)			+= alienware-wmi.o
  alienware-wmi-objs				:= alienware-wmi-base.o
-alienware-wmi-y					+= alienware-wmi-legacy.o
-alienware-wmi-y					+= alienware-wmi-wmax.o
+alienware-wmi-$(CONFIG_ALIENWARE_WMI_LEGACY)	+= alienware-wmi-legacy.o
+alienware-wmi-$(CONFIG_ALIENWARE_WMI_WMAX)	+= alienware-wmi-wmax.o
  obj-$(CONFIG_DCDBAS)				+= dcdbas.o
  obj-$(CONFIG_DELL_LAPTOP)			+= dell-laptop.o
  obj-$(CONFIG_DELL_RBTN)				+= dell-rbtn.o
drivers/platform/x86/dell/alienware-wmi.h +0 -0
index 78ac10122155..97b52e51cd7d 100644
@@ -94,10 +94,33 @@ acpi_status alienware_wmi_command(struct wmi_device *wdev, u32 method_id,
  int alienware_alienfx_setup(struct alienfx_platdata *pdata);
  void alienware_alienfx_exit(struct wmi_device *wdev);
 
Quoted 9 lines

drivers/platform/x86/dell/alienware-wmi.h acpi_status alienware_wmi_command(struct wmi_device *wdev, u32 method_id, · line 103

Quoted 7 lines
drivers/platform/x86/dell/alienware-wmi.h +5 -0
+#if IS_ENABLED(CONFIG_ALIENWARE_WMI_LEGACY)
  int __init alienware_legacy_wmi_init(void);
  void __exit alienware_legacy_wmi_exit(void);
+#else
+int __init alienware_legacy_wmi_init(void)
+{
+	return 0;

Please return -EOPNOTSUPP here.

Maybe -ENODEV is better in this case?

Also this should be static inline, I'll fix it.

Quoted 30 lines
Quoted 5 lines
drivers/platform/x86/dell/alienware-wmi.h +4 -0
+}
+
+void __exit alienware_legacy_wmi_exit(void)
+{

drivers/platform/x86/dell/alienware-wmi.h acpi_status alienware_wmi_command(struct wmi_device *wdev, u32 method_id, · line 117

Quoted 10 lines
drivers/platform/x86/dell/alienware-wmi.h +7 -0
+}
+#endif
 
+#if IS_ENABLED(CONFIG_ALIENWARE_WMI_WMAX)
  int __init alienware_wmax_wmi_init(void);
  void __exit alienware_wmax_wmi_exit(void);
+#else
+int __init alienware_wmax_wmi_init(void)
+{
+	return 0;

Same as above.

Thanks,
Armin Wolf

Quoted 9 lines
drivers/platform/x86/dell/alienware-wmi.h +7 -0
+}
+
+
+void __exit alienware_wmax_wmi_exit(void)
+{
+}
+#endif
 
  #endif
#54 lore raw

Re: [PATCH 19/20] platform/x86: Update alienware-wmi config entries

Am 27.12.24 um 05:59 schrieb Kurt Borja:

Quoted 89 lines · Armin Wolf
Quoted 80 lines

Am 21.12.24 um 06:59 schrieb Kurt Borja:

Quoted 78 lines

Add config entries for each WMI driver managed by the alienware-wmi module to be able to conditionally compile them.

---
   drivers/platform/x86/dell/Kconfig         | 30 +++++++++++++++++++----
   drivers/platform/x86/dell/Makefile        |  4 +--
   drivers/platform/x86/dell/alienware-wmi.h | 23 +++++++++++++++++
   3 files changed, 50 insertions(+), 7 deletions(-)
drivers/platform/x86/dell/Kconfig +25 -5
index d09060aedd3f..f8a0dffcaab7 100644
@@ -18,15 +18,35 @@ config ALIENWARE_WMI
   	tristate "Alienware Special feature control"
   	default m
   	depends on ACPI
+	depends on ACPI_WMI
+	depends on DMI
   	depends on LEDS_CLASS
   	depends on NEW_LEDS
-	depends on ACPI_WMI
+	help
+	 This is a driver for controlling Alienware WMI driven features.
+
+	 On legacy devices, it exposes an interface for controlling the AlienFX
+	 zones on Alienware machines that don't contain a dedicated
+	 AlienFX USB MCU such as the X51 and X51-R2.
+
+	 On newer devices, it exposes the AWCC thermal control interface through
+	 known Kernel APIs.
+
+config ALIENWARE_WMI_LEGACY
+	bool "Alienware Legacy WMI device driver"
+	default y
+	depends on ALIENWARE_WMI
+	help
+	 Legacy Alienware WMI driver with AlienFX LED control capabilities.
+
+config ALIENWARE_WMI_WMAX
+	bool "Alienware WMAX WMI device driver"
+	default y
+	depends on ALIENWARE_WMI
   	select ACPI_PLATFORM_PROFILE
   	help
-	 This is a driver for controlling Alienware BIOS driven
-	 features.  It exposes an interface for controlling the AlienFX
-	 zones on Alienware machines that don't contain a dedicated AlienFX
-	 USB MCU such as the X51 and X51-R2.
+	 Alienware WMI driver with AlienFX LED, HDMI, amplifier, deep sleep and
+	 AWCC thermal control capabilities.
 
   config DCDBAS
   	tristate "Dell Systems Management Base Driver"
drivers/platform/x86/dell/Makefile +2 -2
index d5718ef34c48..8ac9a933c770 100644
@@ -6,8 +6,8 @@
 
   obj-$(CONFIG_ALIENWARE_WMI)			+= alienware-wmi.o
   alienware-wmi-objs				:= alienware-wmi-base.o
-alienware-wmi-y					+= alienware-wmi-legacy.o
-alienware-wmi-y					+= alienware-wmi-wmax.o
+alienware-wmi-$(CONFIG_ALIENWARE_WMI_LEGACY)	+= alienware-wmi-legacy.o
+alienware-wmi-$(CONFIG_ALIENWARE_WMI_WMAX)	+= alienware-wmi-wmax.o
   obj-$(CONFIG_DCDBAS)				+= dcdbas.o
   obj-$(CONFIG_DELL_LAPTOP)			+= dell-laptop.o
   obj-$(CONFIG_DELL_RBTN)				+= dell-rbtn.o
drivers/platform/x86/dell/alienware-wmi.h +0 -0
index 78ac10122155..97b52e51cd7d 100644
@@ -94,10 +94,33 @@ acpi_status alienware_wmi_command(struct wmi_device *wdev, u32 method_id,
   int alienware_alienfx_setup(struct alienfx_platdata *pdata);
   void alienware_alienfx_exit(struct wmi_device *wdev);
 
Quoted 8 lines

drivers/platform/x86/dell/alienware-wmi.h acpi_status alienware_wmi_command(struct wmi_device *wdev, u32 method_id, · line 103

Quoted 7 lines
drivers/platform/x86/dell/alienware-wmi.h +5 -0
+#if IS_ENABLED(CONFIG_ALIENWARE_WMI_LEGACY)
   int __init alienware_legacy_wmi_init(void);
   void __exit alienware_legacy_wmi_exit(void);
+#else
+int __init alienware_legacy_wmi_init(void)
+{
+	return 0;

Please return -EOPNOTSUPP here.

Quoted 3 lines

Maybe -ENODEV is better in this case?

Also this should be static inline, I'll fix it.

-ENODEV is also OK.

Thanks,
Armin Wolf

Quoted 29 lines
Quoted 29 lines
Quoted 5 lines
drivers/platform/x86/dell/alienware-wmi.h +4 -0
+}
+
+void __exit alienware_legacy_wmi_exit(void)
+{

drivers/platform/x86/dell/alienware-wmi.h acpi_status alienware_wmi_command(struct wmi_device *wdev, u32 method_id, · line 117

Quoted 10 lines
drivers/platform/x86/dell/alienware-wmi.h +7 -0
+}
+#endif
 
+#if IS_ENABLED(CONFIG_ALIENWARE_WMI_WMAX)
   int __init alienware_wmax_wmi_init(void);
   void __exit alienware_wmax_wmi_exit(void);
+#else
+int __init alienware_wmax_wmi_init(void)
+{
+	return 0;

Same as above.

Thanks,
Armin Wolf

Quoted 9 lines
drivers/platform/x86/dell/alienware-wmi.h +7 -0
+}
+
+
+void __exit alienware_wmax_wmi_exit(void)
+{
+}
+#endif
 
   #endif
author maintainer
#55 lore raw

PATCH 20/20 alienware-wmi: Update header and module information

In reply to Kurt Borja

Update module description and add myself as a module author.

---
 drivers/platform/x86/dell/alienware-wmi-base.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)
drivers/platform/x86/dell/alienware-wmi-base.c +3 -1
index 450ba0a48004..e8ccf9b277fa 100644
@@ -1,8 +1,9 @@
 // SPDX-License-Identifier: GPL-2.0-or-later
 /*
- * Alienware AlienFX control
+ * Alienware special feature control
  *
  * Copyright (C) 2014 Dell Inc <[email protected]>
+ * Copyright (C) 2024 Kurt Borja <[email protected]>
  */
 
 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
@@ -15,6 +16,7 @@
 #include "alienware-wmi.h"
 
 MODULE_AUTHOR("Mario Limonciello <[email protected]>");
+MODULE_AUTHOR("Kurt Borja <[email protected]>");
 MODULE_DESCRIPTION("Alienware special feature control");
 MODULE_LICENSE("GPL");
 
Signature · 1 line
2.47.1
Reviewed-by on v1 20/20
#56 lore raw

Re: [PATCH 20/20] alienware-wmi: Update header and module information

Am 21.12.24 um 06:59 schrieb Kurt Borja:

Quoted 1 line

Update module description and add myself as a module author.

Quoted 28 lines
---
  drivers/platform/x86/dell/alienware-wmi-base.c | 4 +++-
  1 file changed, 3 insertions(+), 1 deletion(-)
drivers/platform/x86/dell/alienware-wmi-base.c +3 -1
index 450ba0a48004..e8ccf9b277fa 100644
@@ -1,8 +1,9 @@
  // SPDX-License-Identifier: GPL-2.0-or-later
  /*
- * Alienware AlienFX control
+ * Alienware special feature control
   *
   * Copyright (C) 2014 Dell Inc <[email protected]>
+ * Copyright (C) 2024 Kurt Borja <[email protected]>
   */
 
  #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
@@ -15,6 +16,7 @@
  #include "alienware-wmi.h"
 
  MODULE_AUTHOR("Mario Limonciello <[email protected]>");
+MODULE_AUTHOR("Kurt Borja <[email protected]>");
  MODULE_DESCRIPTION("Alienware special feature control");
  MODULE_LICENSE("GPL");
 
author maintainer
#57 lore raw

Re: [PATCH 20/20] alienware-wmi: Update header and module information

Quoted 5 lines · Armin Wolf

Am 21.12.24 um 06:59 schrieb Kurt Borja:

Quoted 1 line

Update module description and add myself as a module author.

Thank you so much for your detailed review Armin! :) I'll submit v2 in a couple of days.

~ Kurt

Quoted 29 lines
Quoted 29 lines
---
  drivers/platform/x86/dell/alienware-wmi-base.c | 4 +++-
  1 file changed, 3 insertions(+), 1 deletion(-)
drivers/platform/x86/dell/alienware-wmi-base.c +3 -1
index 450ba0a48004..e8ccf9b277fa 100644
@@ -1,8 +1,9 @@
  // SPDX-License-Identifier: GPL-2.0-or-later
  /*
- * Alienware AlienFX control
+ * Alienware special feature control
   *
   * Copyright (C) 2014 Dell Inc <[email protected]>
+ * Copyright (C) 2024 Kurt Borja <[email protected]>
   */
 
  #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
@@ -15,6 +16,7 @@
  #include "alienware-wmi.h"
 
  MODULE_AUTHOR("Mario Limonciello <[email protected]>");
+MODULE_AUTHOR("Kurt Borja <[email protected]>");
  MODULE_DESCRIPTION("Alienware special feature control");
  MODULE_LICENSE("GPL");
 
#58 lore raw
In reply to Kurt Borja

Am 21.12.24 um 06:58 schrieb Kurt Borja:

Quoted 10 lines

Hi :)

Hopefully these series are quite complete now. Your feedback is much appreciated!

Previous discussions:

[1] https://lore.kernel.org/platform-driver-x86/6m66cuivkzhcsvpjv4nunjyddqhr42bmjdhptu4bqm6rm7fvxf@qjwove4hg6gb/
[2] https://lore.kernel.org/platform-driver-x86/[email protected]/

Quoted 6 lines

Comments
========

Patches 14 and 20 are proposals. Feel free to NACK them.

~ Kurt

Nice work, i will take a close look at those patches tomorrow.

Thanks,
Armin Wolf

Quoted 48 lines

---
Changes since RFC:
- Incorporated comments from Ilpo which include style and organization issues
- Instead of splitting functionallity blocks, split WMI drivers (Due to Armin's comments)
- Replaced most of the patches near the end because of the above change
- Some patches were squashed into eachother where it made sense
- Rebased on top of recent platform_profile changes!

Kurt Borja (20):
alienware-wmi: Remove unnecessary check at module exit
alienware-wmi: Move Lighting Control State
alienware-wmi: Modify parse_rgb() signature
alienware-wmi: Improve hdmi_mux, amplifier and deepslp group creation
alienware-wmi: Improve rgb-zones group creation
alienware_wmi: Clean variable declaration in thermal methods
alienware-wmi: Add a state container for LED control feature
alienware-wmi: Add WMI Drivers
alienware-wmi: Add a state container for thermal control methods
alienware-wmi: Refactor LED control methods
alienware-wmi: Refactor hdmi, amplifier, deepslp methods
alienware-wmi: Refactor thermal control methods
alienware-wmi: Split DMI table
MAINTAINERS: Update ALIENWARE WMI DRIVER entry platform/x86: Rename alienware-wmi.c
platform/x86: Add alienware-wmi.h
platform-x86: Split the alienware-wmi driver platform/x86: dell: Modify Makefile alignment platform/x86: Update alienware-wmi config entries
alienware-wmi: Update header and module information

  MAINTAINERS                                   |    4 +-
  drivers/platform/x86/dell/Kconfig             |   30 +-
  drivers/platform/x86/dell/Makefile            |   45 +-
  .../platform/x86/dell/alienware-wmi-base.c    |  721 ++++++++++
  .../platform/x86/dell/alienware-wmi-legacy.c  |   89 ++
  .../platform/x86/dell/alienware-wmi-wmax.c    |  526 +++++++
  drivers/platform/x86/dell/alienware-wmi.c     | 1269 -----------------
  drivers/platform/x86/dell/alienware-wmi.h     |  103 ++
  8 files changed, 1491 insertions(+), 1296 deletions(-)

create mode 100644 drivers/platform/x86/dell/alienware-wmi-base.c create mode 100644 drivers/platform/x86/dell/alienware-wmi-legacy.c create mode 100644 drivers/platform/x86/dell/alienware-wmi-wmax.c delete mode 100644 drivers/platform/x86/dell/alienware-wmi.c create mode 100644 drivers/platform/x86/dell/alienware-wmi.h

#59 lore raw

Am 23.12.24 um 00:06 schrieb Armin Wolf:

Quoted 17 lines

Am 21.12.24 um 06:58 schrieb Kurt Borja:

Quoted 15 lines

Hi :)

Hopefully these series are quite complete now. Your feedback is much appreciated!

Previous discussions:

[1]
https://lore.kernel.org/platform-driver-x86/6m66cuivkzhcsvpjv4nunjyddqhr42bmjdhptu4bqm6rm7fvxf@qjwove4hg6gb/
[2]
https://lore.kernel.org/platform-driver-x86/[email protected]/

Comments
========

Quoted 9 lines
Quoted 3 lines

Patches 14 and 20 are proposals. Feel free to NACK them.

~ Kurt

Nice work, i will take a close look at those patches tomorrow.

Thanks,
Armin Wolf

It seems that i overestimated my time schedule during the Christmas holidays, sorry. I will try to review those patches till new year.

Thanks,
Armin Wolf

Quoted 51 lines
Quoted 50 lines

---
Changes since RFC:
  - Incorporated comments from Ilpo which include style and organization issues
  - Instead of splitting functionallity blocks, split WMI drivers (Due to
    Armin's comments)
  - Replaced most of the patches near the end because of the above change
  - Some patches were squashed into eachother where it made sense
  - Rebased on top of recent platform_profile changes!

Kurt Borja (20):
   alienware-wmi: Remove unnecessary check at module exit
   alienware-wmi: Move Lighting Control State
   alienware-wmi: Modify parse_rgb() signature
   alienware-wmi: Improve hdmi_mux, amplifier and deepslp group creation
   alienware-wmi: Improve rgb-zones group creation
   alienware_wmi: Clean variable declaration in thermal methods
   alienware-wmi: Add a state container for LED control feature
   alienware-wmi: Add WMI Drivers
   alienware-wmi: Add a state container for thermal control methods
   alienware-wmi: Refactor LED control methods
   alienware-wmi: Refactor hdmi, amplifier, deepslp methods
   alienware-wmi: Refactor thermal control methods
   alienware-wmi: Split DMI table
   MAINTAINERS: Update ALIENWARE WMI DRIVER entry platform/x86: Rename alienware-wmi.c
   platform/x86: Add alienware-wmi.h
   platform-x86: Split the alienware-wmi driver platform/x86: dell: Modify Makefile alignment platform/x86: Update alienware-wmi config entries
   alienware-wmi: Update header and module information

  MAINTAINERS                                   |    4 +- drivers/platform/x86/dell/Kconfig             |   30 +- drivers/platform/x86/dell/Makefile            |   45 +- .../platform/x86/dell/alienware-wmi-base.c    |  721 ++++++++++ .../platform/x86/dell/alienware-wmi-legacy.c  |   89 ++ .../platform/x86/dell/alienware-wmi-wmax.c    |  526 +++++++ drivers/platform/x86/dell/alienware-wmi.c     | 1269 ----------------- drivers/platform/x86/dell/alienware-wmi.h     |  103 ++

  8 files changed, 1491 insertions(+), 1296 deletions(-)

  create mode 100644 drivers/platform/x86/dell/alienware-wmi-base.c create mode 100644 drivers/platform/x86/dell/alienware-wmi-legacy.c create mode 100644 drivers/platform/x86/dell/alienware-wmi-wmax.c delete mode 100644 drivers/platform/x86/dell/alienware-wmi.c create mode 100644 drivers/platform/x86/dell/alienware-wmi.h

author maintainer
#60 lore raw
Quoted 23 lines · Armin Wolf

Am 23.12.24 um 00:06 schrieb Armin Wolf:

Quoted 21 lines

Am 21.12.24 um 06:58 schrieb Kurt Borja:

Quoted 18 lines

Hi :)

Hopefully these series are quite complete now. Your feedback is much appreciated!

Previous discussions:

[1]
https://lore.kernel.org/platform-driver-x86/6m66cuivkzhcsvpjv4nunjyddqhr42bmjdhptu4bqm6rm7fvxf@qjwove4hg6gb/
[2]
https://lore.kernel.org/platform-driver-x86/[email protected]/

Comments
========

Patches 14 and 20 are proposals. Feel free to NACK them.

~ Kurt

Quoted 7 lines
Quoted 5 lines

Nice work, i will take a close look at those patches tomorrow.

Thanks,
Armin Wolf

It seems that i overestimated my time schedule during the Christmas holidays, sorry. I will try to review those patches till new year.

Thanks, no worries :) Happy holidays!

~ Kurt

Quoted 55 lines

Thanks,
Armin Wolf

Quoted 51 lines
Quoted 50 lines

---
Changes since RFC:
  - Incorporated comments from Ilpo which include style and organization issues
  - Instead of splitting functionallity blocks, split WMI drivers (Due to
    Armin's comments)
  - Replaced most of the patches near the end because of the above change
  - Some patches were squashed into eachother where it made sense
  - Rebased on top of recent platform_profile changes!

Kurt Borja (20):
   alienware-wmi: Remove unnecessary check at module exit
   alienware-wmi: Move Lighting Control State
   alienware-wmi: Modify parse_rgb() signature
   alienware-wmi: Improve hdmi_mux, amplifier and deepslp group creation
   alienware-wmi: Improve rgb-zones group creation
   alienware_wmi: Clean variable declaration in thermal methods
   alienware-wmi: Add a state container for LED control feature
   alienware-wmi: Add WMI Drivers
   alienware-wmi: Add a state container for thermal control methods
   alienware-wmi: Refactor LED control methods
   alienware-wmi: Refactor hdmi, amplifier, deepslp methods
   alienware-wmi: Refactor thermal control methods
   alienware-wmi: Split DMI table
   MAINTAINERS: Update ALIENWARE WMI DRIVER entry platform/x86: Rename alienware-wmi.c
   platform/x86: Add alienware-wmi.h
   platform-x86: Split the alienware-wmi driver platform/x86: dell: Modify Makefile alignment platform/x86: Update alienware-wmi config entries
   alienware-wmi: Update header and module information

  MAINTAINERS                                   |    4 +- drivers/platform/x86/dell/Kconfig             |   30 +- drivers/platform/x86/dell/Makefile            |   45 +- .../platform/x86/dell/alienware-wmi-base.c    |  721 ++++++++++ .../platform/x86/dell/alienware-wmi-legacy.c  |   89 ++ .../platform/x86/dell/alienware-wmi-wmax.c    |  526 +++++++ drivers/platform/x86/dell/alienware-wmi.c     | 1269 ----------------- drivers/platform/x86/dell/alienware-wmi.h     |  103 ++

  8 files changed, 1491 insertions(+), 1296 deletions(-)

  create mode 100644 drivers/platform/x86/dell/alienware-wmi-base.c create mode 100644 drivers/platform/x86/dell/alienware-wmi-legacy.c create mode 100644 drivers/platform/x86/dell/alienware-wmi-wmax.c delete mode 100644 drivers/platform/x86/dell/alienware-wmi.c create mode 100644 drivers/platform/x86/dell/alienware-wmi.h