arm64: dts: rockchip: Add BigTreeTech CB2 and Pi2
Subsystems (2)
v7 cover arm64: dts: rockchip: Add BigTreeTech CB2 and Pi2
BigTreeTech CB2 and Pi2 are Rockchip RK3566 SoM and SBC boards made by BigTreeTech for the intent of using as a 3d printer control board. It is a successor to the Allwinner H616-based BigTreeTech CB1 and Pi, so the device trees for CB2 and Pi2 are also done in the same manner: the common nodes and properties are put into a dtsi file that the board-specific device trees include.
Changes in v7:
- Removed all of the additional pinctrl nodes that were unused.
- Link to v6: https://lore.kernel.org/r/[email protected]
Changes in v6:
- Fixed node names missed in v5
- Link to v5: https://lore.kernel.org/r/[email protected]
Changes in v5:
- Applied requested changes
- Fixed usb phy-supply format
- Removed improperly named pinctrl nodes that were unused.
- Fixed names of other pinctrl nodes
- Link to v4: https://lore.kernel.org/r/[email protected]
Changes in v4:
- Removed invalid i2c,ignore-nak properties
- Set #address-cells and size-cells on sdmmc1
- Fixed phy-supply properties of usb host nodes
- Link to v3: https://lore.kernel.org/r/[email protected]
Changes in v3:
- Proper formatting and patch series sending (using b4)
- Converted spaces to tab indentation in the dtsi file
- Fixed empty line where the license identifier should be
- Link to v2 1/2: https://lore.kernel.org/linux-rockchip/[email protected]/
- Link to v2 2/2: https://lore.kernel.org/linux-rockchip/[email protected]/
Changes in v2:
- Added bigtreetech cb2 and pi2 boards to the list of platforms
- Split BigTreeTech CB2 and Pi2 into two device trees using common dtsi
- Link to v1: https://lore.kernel.org/linux-rockchip/[email protected]/
---
Ivan Sergeev (2):
dt-bindings: arm: rockchip: Add BigTreeTech CB2 and Pi2
arm64: dts: rockchip: Add BigTreeTech CB2 and Pi2
.../devicetree/bindings/arm/rockchip.yaml | 11 + arch/arm64/boot/dts/rockchip/Makefile | 2 + .../dts/rockchip/rk3566-bigtreetech-cb2-manta.dts | 10 + .../boot/dts/rockchip/rk3566-bigtreetech-cb2.dtsi | 885 +++++++++++++++++++++ .../boot/dts/rockchip/rk3566-bigtreetech-pi2.dts | 10 + 5 files changed, 918 insertions(+)
---
base-commit: 9d89551994a430b50c4fffcb1e617a057fa76e20
change-id: 20241224-bigtreetech-cb2-18944b349916
Best regards,
Signature · 1 line
Ivan Sergeev <[email protected]>
PATCH v7 1/2 dt-bindings: arm: rockchip: Add BigTreeTech CB2 and Pi2
BigTreeTech CB2 and Pi2 are Rockchip RK3566 based boards
--- Documentation/devicetree/bindings/arm/rockchip.yaml | 11 +++++++++++ 1 file changed, 11 insertions(+)
Documentation/devicetree/bindings/arm/rockchip.yaml +11 -0
@@ -81,6 +81,17 @@ properties: - const: azw,beelink-a1 - const: rockchip,rk3328 + - description: BigTreeTech CB2 Manta M4/8P + items: + - const: bigtreetech,cb2-manta + - const: bigtreetech,cb2 + - const: rockchip,rk3566 + + - description: BigTreeTech Pi 2 + items: + - const: bigtreetech,pi2 + - const: rockchip,rk3566 + - description: bq Curie 2 tablet items: - const: mundoreader,bq-curie2
Signature · 1 line
2.45.2
PATCH v7 2/2 arm64: dts: rockchip: Add BigTreeTech CB2 and Pi2
In reply to Ivan SergeevBigTreeTech CB2 and Pi2 share a lot of hardware configuration, so a common dtsi file was used to define common nodes and properties. This is similar to how BigTreeTech CB1 and Pi are implemented.
--- arch/arm64/boot/dts/rockchip/Makefile | 2 + .../dts/rockchip/rk3566-bigtreetech-cb2-manta.dts | 10 + .../boot/dts/rockchip/rk3566-bigtreetech-cb2.dtsi | 885 +++++++++++++++++++++ .../boot/dts/rockchip/rk3566-bigtreetech-pi2.dts | 10 + 4 files changed, 907 insertions(+)
arch/arm64/boot/dts/rockchip/Makefile +2 -0
@@ -111,6 +111,8 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-box-demo.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-lckfb-tspi.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-lubancat-1.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-nanopi-r3s.dtb +dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-bigtreetech-cb2-manta.dtb +dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-bigtreetech-pi2.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-bpi-r2-pro.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-evb1-v10.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-fastrhino-r66s.dtb
arch/arm64/boot/dts/rockchip/rk3566-bigtreetech-cb2-manta.dts new file +10 -0
@@ -0,0 +1,10 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) + +/dts-v1/; + +#include "rk3566-bigtreetech-cb2.dtsi" + +/ { + model = "BigTreeTech CB2"; + compatible = "bigtreetech,cb2-manta", "bigtreetech,cb2", "rockchip,rk3566"; +};
arch/arm64/boot/dts/rockchip/rk3566-bigtreetech-cb2.dtsi new file +885 -0
885 lines not on this page · raw message
arch/arm64/boot/dts/rockchip/rk3566-bigtreetech-pi2.dts new file +10 -0
@@ -0,0 +1,10 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) + +/dts-v1/; + +#include "rk3566-bigtreetech-cb2.dtsi" + +/ { + model = "BigTreeTech Pi 2"; + compatible = "bigtreetech,pi2", "rockchip,rk3566"; +};
Signature · 1 line
2.45.2
Quoted 8 lines · Ivan Sergeev
BigTreeTech CB2 and Pi2 are Rockchip RK3566 SoM and SBC boards made by BigTreeTech for the intent of using as a 3d printer control board. It is a successor to the Allwinner H616-based BigTreeTech CB1 and Pi, so the device trees for CB2 and Pi2 are also done in the same manner: the common nodes and properties are put into a dtsi file that the board-specific device trees include.
[...]
Applied, thanks!
[1/2] dt-bindings: arm: rockchip: Add BigTreeTech CB2 and Pi2
commit: 1a623c642b4066a5cea751ef52ab109b65e8afb5
[2/2] arm64: dts: rockchip: Add BigTreeTech CB2 and Pi2
commit: bfbc663d2733a42d93143a91659e82c8a13f5a36Best regards,
Signature · 1 line
Heiko Stuebner <[email protected]>