Add support for rgmii-id phy mode
cover Add support for rgmii-id phy mode
An issue was identified where selecting the phy-mode as rgmii-id in the device tree source (DTS) would cause the dwc_eth_xgmac_socfpga driver to raise an unsupported phy mode error.
From the MAC controller's perspective, the rgmii and rgmii-id phy modes are effectively identical. To address this, both modes will now be configured to rgmii in the MAC controller.
This change ensures that the rgmii-id phy mode is properly supported without error.
Boon Khai Ng (1):
net: dwc_eth_xgmac_socfpga: Add support for rgmii-id mode.
drivers/net/dwc_eth_xgmac_socfpga.c | 1 + 1 file changed, 1 insertion(+)
Signature · 1 line
2.26.2
PATCH 1/1 net: dwc_eth_xgmac_socfpga: Add support for rgmii-id mode.
An issue was identified where selecting the phy-mode as rgmii-id in the device tree source (DTS) would cause the dwc_eth_xgmac_socfpga driver to raise an unsupported phy mode error.
From the MAC controller's perspective, the rgmii and rgmii-id phy modes are effectively identical. To address this, both modes will now be configured to rgmii in the MAC controller.
This change ensures that the rgmii-id phy mode is properly supported without error.
--- drivers/net/dwc_eth_xgmac_socfpga.c | 1 + 1 file changed, 1 insertion(+)
drivers/net/dwc_eth_xgmac_socfpga.c +1 -0
@@ -80,6 +80,7 @@ static int xgmac_probe_resources_socfpga(struct udevice *dev) modereg =SYSMGR_EMACGRP_CTRL_PHYSEL_ENUM_RMII ;break ;case PHY_INTERFACE_MODE_RGMII : +case PHY_INTERFACE_MODE_RGMII_ID : modereg =SYSMGR_EMACGRP_CTRL_PHYSEL_ENUM_RGMII ;break ;default :
Signature · 1 line
2.26.2
RE: [XGMAC RGMII-ID fix v1 1/1] net: dwc_eth_xgmac_socfpga: Add support for rgmii-id mode.
Quoted 54 lines
-----Original Message-----
From: Ng, Boon Khai <[email protected]>
Sent: Friday, January 17, 2025 2:56 PM
To: Uboot Open List <[email protected]>
Cc: Chee, Tien Fong <[email protected]>; Hea, Kok Kiang <[email protected]>; Maniyam, Dinesh <[email protected]>; Yuslaimi, Alif Zakuan <[email protected]>; Zamri, Muhammad Hazim Izzat <[email protected]>; Tien Fong Chee <[email protected]>; Kok Kiang Hea <[email protected]>; Dinesh Maniyam <[email protected]>; Alif Zakuan <[email protected]>; Boon Khai Ng <[email protected]>; Muhammad Hazim <[email protected]>; Joe Hershberger <[email protected]>; Ramon Fried <[email protected]>; Tom Rini <[email protected]>; Simon Glass <[email protected]>; Ng, Boon Khai <[email protected]>
Subject: [XGMAC RGMII-ID fix v1 1/1] net:dwc_eth_xgmac_socfpga: Add support for rgmii-id mode.An issue was identified where selecting the phy-mode as rgmii-id in the device tree source (DTS) would cause the
dwc_eth_xgmac_socfpgadriver to raise an unsupported phy mode error.From the MAC controller's perspective, the rgmii and rgmii-id phy modes are effectively identical. To address this, both modes will now be configured to rgmii in the MAC controller.
This change ensures that the rgmii-id phy mode is properly supported without error.
Signed-off-by Boon Khai Ng <[email protected]>--- drivers/net/dwc_eth_xgmac_socfpga.c | 1 + 1 file changed, 1 insertion(+)drivers/net/dwc_eth_xgmac_socfpga.c +1
-0@@ -80,6 +80,7 @@ static int xgmac_probe_resources_socfpga(struct udevice *dev) modereg =SYSMGR_EMACGRP_CTRL_PHYSEL_ENUM_RMII ;break ;case PHY_INTERFACE_MODE_RGMII : +case PHY_INTERFACE_MODE_RGMII_ID : modereg =SYSMGR_EMACGRP_CTRL_PHYSEL_ENUM_RGMII ;drivers/net/dwc_eth_xgmac_socfpga.c +0
-1break ;default : --
Quoted 1 line
2.26.2
Best regards,
Tien Fong