Skip to content

Add support for rgmii-id phy mode

Boon Khai Ng u-boot 1 version In review

Get series with b4
b4 am [email protected]

Versions newest first

  1. v1 Latest1 patch 1 replyIn review

Patches in v1 No applies recorded yet

#Subject and filesSizeRepliesApplied
1/1net: dwc_eth_xgmac_socfpga: Add support for rgmii-id mode.drivers/net/dwc_eth_xgmac_socfpga.c+1 -01 reply

Reviews trailers per patch

The patch has a Reviewed-by or Acked-by.

PatchTien Fong Chee
1/1R-b

Trailers given in replies are filled; those carried in the patches from earlier versions are outlined with dashes.

Read the v1 thread

Cover letter [XGMAC RGMII-ID fix v1 0/1] Add support for rgmii-id phy mode

An issue was identified where selecting the phy-mode as rgmii-id in the device tree source (DTS) would cause the dwc_eth_xgmac_socfpga driver to raise an unsupported phy mode error.

From the MAC controller's perspective, the rgmii and rgmii-id phy modes are effectively identical. To address this, both modes will now be configured to rgmii in the MAC controller.

This change ensures that the rgmii-id phy mode is properly supported without error.

Boon Khai Ng (1):
net: dwc_eth_xgmac_socfpga: Add support for rgmii-id mode.

 drivers/net/dwc_eth_xgmac_socfpga.c | 1 +
 1 file changed, 1 insertion(+)
Signature · 1 line
2.26.2